Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
BigE Support and ResistanceBigE Signals is a multi-timeframe trade-planning and signal indicator designed primarily for Nasdaq-100 futures traders. It identifies when specific bullish or bearish strategies are approaching, developing, or confirmed—rather than placing signals on every green or red candle.
The indicator combines price structure, EMA alignment, VWAP positioning, predefined support and resistance zones, higher-timeframe trend confirmation, volatility conditions, candle rejection patterns, and breakout/retest logic. Signals are organized into two stages:
WATCH signals alert traders when price enters a qualified strategy zone and the required setup conditions are beginning to form.
ENTRY signals appear only after the strategy receives additional confirmation, such as a reclaim, rejection, breakout, breakdown, or successful retest. Indicator
Sovereign Horizon Matrix (SHM) v8.0
SHM Bidirectional v8.0
⚔️ Executive Summary (SHM v8.0)
SHM Bidirectional v8.0 is an institutional-grade, macro trend-following execution matrix engineered for higher-timeframe swing trading on the Daily chart.
Built primarily for Bitcoin (BTC)—and modeled after real-world Coinbase Nano Bitcoin Futures execution mechanics—SHM v8.0 combines an 8-pillar technical framework with strict, non-repainting risk management. It eliminates chart fatigue and emotional bias, allowing Institutional and Retail traders to capture major trends while keeping their time free for the gym, work, and family.
* Primary Design: Daily Chart Swing Trading & Automation-Ready Execution Engine
* Core Focus: Bitcoin (BTC) macro expansion cycles (Fully adjustable for Altcoins, Futures, and Equities)
* Key Mechanics: Dual Baseline (63/480 WMA), Dual Break & Retest Engines, RSI Momentum Gate, and 3-Module Risk Engine
* Backtest Snapshot (BTC Daily): 7.617 Profit Factor | 18.85% Max Drawdown | 124.49% CAGR (56 trades)
⚙️ Purpose, Asset Focus & Time-Saving Design
The Purpose:
SHM v8.0 was created to solve a fundamental trading challenge: eliminating emotional bias, filtering out bad breakouts, and enforcing strict, automated risk management across volatile market cycles. The goal is to provide traders with a clean, repeatable strategy that captures real trends while shielding capital during choppy sideways movement.
Primary Target & Chart Focus:
* Primary Asset: Engineered primarily for Bitcoin (BTC) to handle its unique cycles, volatility spikes, and macro trend expansions.
* Daily Chart Focus: Designed specifically around higher-timeframe swing trading on the Daily chart. This makes it ideal for traders who don't have the time to sit in front of charts all day managing intraday noise.
* Full Adjustability: Works seamlessly across other crypto pairs, futures, and stocks. You have complete freedom to tweak all parameters—WMA lengths, envelope percentages, RSI filters, and stop distances—to match any market or timeframe.
⚙️ Core System Architecture
SHM v8.0 functions as a macro trend-following execution matrix. Because every signal and exit runs on fixed non-repainting calculations, it can also operate as a quantitative trend follower when linked to automated webhooks or trading bots.
1. Dual Baseline Framework: Combines a 63 Fast Institutional WMA with a 480 Macro Baseline WMA Tide filter to keep daily trades aligned with macro market structure.
2. Dual Break & Retest (B&R) Engine: Dedicated Micro (63 WMA) and Macro (480 WMA) engines track depth, touch penetration, and bounce candles to filter out false breakouts.
3. Timeframe-Locked RSI Momentum Gate: Verifies directional expansion so you don't buy near local tops or short into oversold bottoms.
4. Triple-Band Envelope System: Uses multi-layer WMA volatility bands to highlight expansion channels and potential exhaustion zones visually.
🛡️ SHM Modular Risk Engine
The script features three non-repainting exit modules:
* Module 1 (Flat TP to Breakeven): Moves your stop loss straight to entry price once a set profit percentage target is reached.
* Module 2 (65 WMA Ribbon Trail): Dynamically trails stops along the 65 WMA ribbon floor or ceiling during sustained trends.
* Module 3 (Candle-Close Trail): Steps your stop loss behind recent candle closes to lock in profits during sharp extensions.
📊 Default Properties, Backtest Metrics & Real-World Execution
To maintain total transparency and adhere to PulseWire backtesting standards, default strategy Properties reflect realistic exchange execution mechanics (modeled after Coinbase Nano Bitcoin Futures / Derivatives environment settings):
* Initial Capital: $717 USD
* Position Sizing: 80% of Equity (default size is set higher for compounding, but can easily be adjusted in settings to match your personal risk tolerance)
* Leverage: 4x Long / ~3x Short
* Commission: 0.075% per trade
* Slippage & Delay: 30 ticks slippage / 1 tick order execution delay
* Execution Realism: Calculates on bar closes, order fills, and real-time bar ticks.
📈 Historical Performance Context (Daily Chart)
* Historical Data Source: Because newer derivatives tickers lack long-term price history, the full historical aggregate BTC chart was used to provide maximum sample depth.
* Trade Frequency: Running on the Daily chart generates a focused sample size of 56 trades across the dataset. While it doesn't hit the high trade counts of lower-timeframe scalpers, the efficiency of the framework stands out:
* Profit Factor: 7.617
* Max Equity Drawdown: 18.85%
* Average Winning Trade: +56.41% vs. Average Loss: -3.29%
* Compound Annual Growth Rate (CAGR): 124.49%
📌 Usage & Automation
* Execution Modes: Toggle between pure Price Action Baseline entries, Break & Retest Standalone entries, or Combined execution in the input menu.
* Automation Ready: All order conditions and trailing exits execute instantly on confirmed bar closes, making SHM fully compatible with webhook automation tools.
⚠️ Disclaimer & Compliance:
This script is published for educational and technical analysis backtesting purposes only. Past backtested results do not guarantee future performance. Always apply strict risk management and adjust commission, slippage, and position sizing settings to match your specific execution platform prior to live deployment.
Strategy
Indicator
SMT Lite - Market Structure DataSMT Lite is a single-symbol market-structure indicator that identifies confirmed swing structure, supply and demand zones, and breaks of structure on the current chart and timeframe.
It is not a cross-symbol SMT divergence indicator.
Features
HH, LH, HL, and LL swing labels
ATR-scaled supply and demand zones
Point-of-interest midpoint for each zone
Bullish and bearish break-of-structure markers
Optional zigzag
JSON alerts for newly confirmed swing classifications
Status-line data for pivots, volatility, structure, and active zones
Calculations
Swing highs and lows require the selected Swing High/Low Length on both sides of a pivot. Labels appear on the original pivot bar only after the required future bars confirm it.
Zone thickness is calculated using the 50-period ATR:
50 ATR × (Box Width ÷ 10)
Supply zones extend downward from confirmed swing highs. Demand zones extend upward from confirmed swing lows. Nearby overlapping zones are filtered to reduce clutter.
A bullish BOS occurs when price closes at or above an active supply-zone ceiling. A bearish BOS occurs when price closes at or below an active demand-zone floor.
Status-Line Data
The indicator exposes:
Bullish or bearish structural state
Last confirmed pivot high and low
50-period ATR
Closest active supply and demand boundaries
Zone midpoint and age in bars
Current-bar BOS breach price
These values are hidden from the chart scale and available through the indicator status line.
Alerts
Alerts are generated for confirmed HH, LH, HL, and LL events using JSON containing the ticker, structure type, pivot price, and detection time.
Create an alert using “Any alert() function call.”
Important
This indicator does not measure actual order flow or resting liquidity. Zones are derived from confirmed pivots and ATR.
Pivot signals are delayed by design. The active zigzag segment and developing-bar signals may change before the bar closes.
This is an analytical indicator, not a trading strategy or standalone entry signal.
Indicator
Miyagi 1-3-1 and 3-2-2 SetupsThis indicator detects and manages two specific setups from "The Strat", the price-action methodology created by Rob Smith (credit to him for the underlying concepts; this implementation is my own original code using AYCE's setups). It classifies candles the standard Strat way — relative to the previous candle, a bar is a 1 (inside bar: took out neither side), a 2 (directional bar: took out one side only), or a 3 (outside bar: took out both sides) — and applies that classification to two rule-based setups on their proper timeframes. These specific setups were created by AYCE, credit must be given.
SETUP 1: THE 1-3-1 (12-hour chart for stocks, 6-hour chart for SPX)
With extended trading hours enabled, the 12-hour session candles split the day into a market candle (04:00–16:00 ET) and an overnight candle (16:00–04:00 ET). The setup requires an inside bar, then an outside bar, then a second inside bar (the strict leading-1 requirement can be relaxed in settings). The trailing 1 bar's 50% level — (high + low) / 2 — becomes the reference for the next session:
If pre-market touches the 50% level, the setup is invalidated.
If it survives to the open: opening above the 50% gives a short-side plan (trigger at the 50%, first target the 1 bar's low); opening below gives the mirrored long-side plan (first target the 1 bar's high).
On the SPX index there is no pre-market, so the 6-hour chart is used instead and the plan activates directly at the open. The script automatically disables the 12-hour logic on SPX.
SETUP 2: THE 3-2-2 REVERSAL (1-hour chart, stocks with pre-market data)
The 08:00 ET hourly candle must be a 3, the 09:00 candle must be a 2, and only the 10:00 candle may complete the setup — by taking out the 9am candle's opposite extreme (a reversal 2). A continuation break, or an hour that ends without the reversal, cancels the setup. Continuation 2s are never signaled: this is strictly a reversal pattern. When a valid reversal fires, the three bars are marked 3-2-2 on the chart, with the entry at the break and the first target at the 3 bar's outside.
WHAT MAKES IT ORIGINAL
Timeframe-aware behavior in one script: on the 12H/6H/1H charts it detects natively on the chart's own candles; on any chart below 1H it switches to projection mode and draws the live higher-timeframe levels (requested with request.security using a one-bar offset, so only confirmed higher-timeframe values are used — no future data is accessed).
Sequenced outcome scoring: past 1-3-1 setups are graded by replaying the following session in time order with lower-timeframe data (request.security_lower_tf), so a session that filled at the 50% and reached the target before reversing is correctly scored a success even if the candle later became a 3. Marks: cancelled pre-market, target reached, stop side first, no fill, flat at close.
Event-driven alert architecture: every state change (setup detected, confirmed at the open with direction and levels, invalidated, entry touched, reversal triggered, cancelled) is an alert() event you can enable per event in the settings, so a single "Any alert() function call" alert per symbol carries everything. Classic per-event alert conditions are also included, each with its required trigger frequency written into its name.
HOW TO USE IT
Add the indicator to a 12-hour chart (stocks, extended hours ON), a 6-hour chart (SPX), a 1-hour chart (stocks), or any sub-1-hour chart for projection mode. Auto mode picks the right behavior from the timeframe.
On the 12H/6H chart, valid 1-3-1 patterns are numbered on their candles and later scored. On the 1H chart, a 3-then-2 sequence shows its trigger and target lines during the 10am hour only. On lower timeframes, the higher-timeframe levels appear as live lines: three lines pre-market, reduced to the active side at the open.
For alerts, open the settings, choose the events you want under "All-in-one alert", then create one alert with the condition set to this indicator and "Any alert() function call", open-ended. Alerts are bound to the symbol and settings at creation time, so re-create the alert after changing settings. Alternatively, use the individual alert conditions and set each one's frequency as written in its name (Once Per Bar Close for close-based events, Once Per Bar for intrabar events).
The status panel summarizes the current state of both setups; it can be moved, resized, or hidden.
LIMITATIONS AND TRANSPARENCY
Higher-timeframe values are requested with a one-bar offset and confirmed bars only; live watch labels update in real time by design, and their state at bar close is final.
On historical 1-hour bars that touched both the trigger and the invalidation level within the same bar, the sequence cannot be known after the fact; such cases are marked cancelled rather than counted as signals. In real time the script evaluates tick order as it happens.
Intrabar alert events require live trades, so use liquid symbols. Outcome scoring depends on available lower-timeframe history, so older setups show the pattern without a score.
Session times are US Eastern and configurable. Extended trading hours must be enabled on stock charts for the pattern windows to exist.
This is a chart-analysis tool for studying a rule-based methodology. It does not predict the market, and nothing here is financial advice. Test it and draw your own conclusions. Indicator
Ricosweat mixRicosweat Mix is a multi‑framework market‑structure and trend‑context indicator designed for intraday and swing traders who want a clean, actionable dashboard of higher‑timeframe trend, dynamic moving averages, VWAP structure, S/R flips, and candle‑by‑candle momentum shifts.
This script blends several high‑value components into one unified overlay, helping traders quickly understand trend direction, intraday bias, and key reaction zones without clutter.
Core Features
1. Higher‑Timeframe Trend Filter (HTF)
Pulls EMA‑200 from a user‑selectable higher timeframe (default: 60‑minute).
Provides a simple visual trend bias so traders can align entries with HTF momentum.
2. Moving Averages Suite
Configurable and color‑coded:
9 EMA – short‑term momentum
21 EMA – micro‑trend
200 EMA – macro‑trend anchor
Session VWAP – institutional volume‑weighted mean
Optional VWAP Standard Deviation Bands for volatility context
These help identify pullbacks, trend continuation zones, and dynamic support/resistance.
3. Pivot‑Based Support & Resistance Flips
Automatic detection of pivot highs/lows using left/right bar inputs
Highlights S/R flips, a powerful price‑reaction signal used by discretionary traders
Custom colors for support vs. resistance
4. First‑Hour Initial Balance (IB)
Plots the 0930–1030 session IB (configurable)
Helps traders track range expansion, breakout conditions, and opening‑drive behavior
Clean IB high/low lines with customizable color
5. CBC (Candle‑By‑Candle) Trend Flips
Highlights bullish or bearish candle‑by‑candle shifts
Useful for scalpers and momentum traders
Custom bull/bear colors for instant visual recognition
What This Indicator Helps You Do
Quickly identify trend alignment across multiple timeframes
Spot high‑probability pullback zones using EMAs and VWAP
Track intraday structure via IB and pivot‑based S/R
Recognize micro‑momentum shifts with CBC flips
Reduce chart clutter by combining several tools into one unified overlay
Ideal For
Intraday futures traders (NQ, ES, SPY, QQQ)
Momentum scalpers
Trend‑following traders
Anyone wanting a clean, multi‑signal overlay without over‑complication Indicator
Liquidity Reaper [JOAT]Tracks resting liquidity at swing extremes and signals the reversal when that liquidity is raided and rejected.
◆ WHAT IT IS
Price frequently pushes just beyond an obvious swing high or low — running the stops resting there — and then snaps back. Liquidity Reaper is built to detect that specific sequence: a sweep of a liquidity pool followed by a confirmed rejection , with volume backing the move. Each confirmed raid produces a reversal signal and a complete trade framework.
This is 100% original code, written from scratch. It does not copy or repackage any other author's work.
◆ HOW IT WORKS
1. Liquidity pools. Confirmed swing highs and lows (using your chosen strength) are stored as live liquidity rails — the price levels where stop orders tend to cluster. Unswept rails stay drawn on the chart; the oldest are recycled so the chart never clutters.
2. The raid. When price trades through a pool intrabar, a pending sweep opens on that side and the rail is terminated at the raid bar.
3. Confirmation. The raid only becomes a signal if, within a set confirmation window, price closes back inside the level in the opposite direction. Two extra filters keep the signal honest:
• Rejection wick — the sweep must reject with a wick of at least a configurable percentage of the candle's range, filtering shallow pokes
• Volume expansion — the raid must occur on above-average volume, so passive drifts are ignored
4. The zone. Each confirmed raid paints a swept zone across the raided range (pool level to wick extreme) — a reference area price often reacts to again.
◆ WHAT YOU SEE
• Liquidity rails at unswept swing highs (upside liquidity) and lows (downside liquidity)
• RAID BUY / RAID SELL labels showing the relative volume of the raid
• Painted swept zones on every confirmed raid
• A full TP/SL framework — entry, stop, TP1–TP3, risk/reward fills — that self-closes on a stop or final target
• A resizable dashboard reporting live pool counts each side, the nearest pool above and below with its ATR distance, pending-sweep status, raid history, and open position
◆ HOW TO USE IT
• The rails show where liquidity rests — natural draw-on-liquidity targets and reaction levels even before any signal.
• A RAID signal marks a completed sweep-and-reject; treat it as a potential reversal from that extreme.
• Swept zones are useful for re-entries and for placing stops beyond the wick.
• Works on all symbols and timeframes. Increase swing strength and the wick filter for major structure only; loosen them for active intraday sweeps.
◆ NOTES & LIMITATIONS
Use on standard candlestick charts . Sweep detection needs a genuine volume feed for the volume filter to be meaningful (disable it on symbols without volume). Signals are decision-support only — they are not financial advice and cannot guarantee a reversal will follow. Always apply your own risk management.
— made with passion by officialjackofalltrade
Indicator
Swiftedge Oderflow ToolSwiftedge Oderflow Tool
OVERVIEW
This indicator is an all-in-one orderflow toolkit that visualizes where significant traded volume has built up, whether those levels have been revisited, and how current activity compares to recent norms. It combines six modules that share one calculation engine:
Liquidity lines — horizontal levels born on the candle that built the volume, running until price trades back through them
Trade bubbles — outsized volume prints, colored by delta
A buy/sell split volume profile anchored at the price axis
HVN / LVN reaction zones detected from the profile
Session levels (Asia / London / New York), daily levels (PDH / PDL / PDC), session VWAP and a developing value area (POC / VAH / VAL)
A dashboard with bar delta, CVD divergence, relative volume, ADR usage and the nearest level above/below price
Every module can be toggled independently, so the indicator can run as a minimal liquidity map or a full cockpit.
HOW IT WORKS
Volume distribution. Each chart bar is decomposed into lower-timeframe candles (1-minute by default, configurable down to seconds where your plan provides them). Each LTF candle's volume is booked to a price bin at its close, and classified as buy or sell volume by its candle direction. Where LTF data is unavailable (older history), the bar's volume is spread evenly across its high-low range as a fallback.
Liquidity lines. A price bin that accumulates a significant share of volume (relative-strength threshold, configurable) spawns a line. The line is anchored to the bar that contributed the most volume to that level, and is plotted at the level's volume-weighted price — not at a rounded grid price. While the level remains untouched it extends to the right edge of the chart. When price trades through the level, its accumulated strength is "burned" (configurable percentage per bar); once it falls below the threshold the line is closed at that bar. Untouched liquidity therefore persists visibly, while consumed liquidity ends exactly where it was consumed. Color and line width scale with the level's peak strength, normalized against the 95th percentile of visible levels; old mitigated lines fade progressively.
Visible-range adaptation. The engine reads the chart's visible range and recalculates on every scroll or zoom. Level resolution (bin size) is derived from the visible price span, so the map keeps a consistent density at any zoom level. A warm-up window (one quarter of the visible span) is processed before the left edge so lines do not start "cold".
Bubbles. A bar whose volume exceeds a configurable percentile of recent bars (defaults: 90 / 97 / 99.5 for small / medium / large) prints a circle at its close, colored by the bar's delta sign.
Volume profile. Built from the visible bars, with each bar's volume spread across its full high-low range, split into buy and sell volume, and smoothed with a 1-2-1 kernel (configurable passes). It is drawn against a fixed wall at the right edge, growing inward, with the buy portion (green) and sell portion (magenta) stacked per row.
HVN / LVN zones. From the smoothed profile, HVNs are the largest local peaks (with a minimum substance filter) and LVNs are the deepest local valleys that sit between populated areas (range edges are excluded). The top N of each (default 3) are drawn as translucent horizontal zones across the visible range with small tags at the right edge.
Sessions, daily levels, VWAP, value area. Session open/high/low are tracked per configurable session windows and timezone and reset daily. PDH / PDL / PDC come from the completed prior daily candle (fetched with lookahead on closed data only — no future leak). VWAP accumulates hlc3 × volume from the daily open. The developing value area builds today's volume distribution and expands from the POC until 70% of volume is captured, yielding POC / VAH / VAL.
Absorption flags. A diamond marks bars with volume above a high percentile but an unusually small range (fraction of ATR14): heavy business transacted without price progress — a classic absorption footprint. Below-bar green diamonds indicate positive delta, above-bar magenta diamonds negative delta.
Dashboard. Bar delta and N-bar delta sum (from the LTF decomposition), a CVD-vs-price divergence check over a configurable lookback, relative volume vs its 20-bar average, day range as a percentage of the average daily range, the active session, and the nearest tracked level above and below current price with distance in percent.
HOW TO USE IT
Untouched liquidity lines act as a map of levels the market has built but not yet retested; strong (bright, thick) untouched lines are natural magnets and reaction candidates.
A line ending shows you exactly where and when that liquidity was consumed.
HVN zones mark acceptance (price tends to slow down and two-way trade there); LVN zones mark rejection/vacuum areas (price tends to move through them quickly or turn at their edge).
Session highs/lows and PDH/PDL are widely watched reference levels; combined with the liquidity map you can see whether volume actually built at them.
The dashboard's divergence row flags when price makes progress that cumulative delta does not confirm.
Use the companion CVD panel script for the delta curve in a separate pane.
SETTINGS NOTES
Defaults are tuned for liquid crypto and index futures on intraday timeframes (1-15 min). The lower timeframe input controls distribution precision: "1" (minute) works broadly; second-based timeframes increase precision on recent data where your subscription provides them. Session times default to a European timezone and should be adjusted to your market.
LIMITATIONS — PLEASE READ
PulseWire does not provide order book (L2) or bid/ask tape data to Pine. All volume placement and delta in this indicator are approximations built from lower-timeframe OHLCV data. This is a principled approximation, not actual resting orders or true tape delta.
The indicator draws in the visible range and recalculates when you scroll or zoom; drawings therefore adapt to the window you are viewing. The heavy rendering runs once per bar close, so the newest bar's lines can update with up to one bar of delay.
Lower-timeframe history is limited by PulseWire; on older history the fallback distribution (bar range spread) is used, which is coarser.
Volume must be provided by your data feed; on symbols without volume the indicator cannot work.
This is a visualization and context tool. It generates no signals and no performance claims are made or implied. Indicator
Indicator
Indicator
Indicator
Entry-to-Exit ToolA realtime non-repainting entry-to-exit analysis tool that retains a Provisional or Finalized BUY/SELL entry reference and resolves it through an opposite signal, confirmed terminal invalidation, minimum-profit target, or entry-terminal risk/reward target. The displayed exits are analytical reference events and are not a guarantee of profitability or future performance.
Name:
Entry-to-Exit Tool
Searchable Name:
Realtime Non-Repainting Entry Exit Target and Risk Reward Tool
Technical Name:
Realtime Non-Repainting Provisional Finalized Entry Reference Opposite Signal Terminal Break Profit Target and Risk Reward Exit Resolution Tool
Short title:
Trade Exit Tool
Summary
Entry-to-Exit Tool is an exit-resolution indicator that converts internally generated Provisional or Finalized BUY/SELL signals into retained entry references and then identifies where those references would resolve under a selected exit method.
The script does not require signals from another indicator. It contains its own causal transform-path signals, structural resolver, Provisional signal ledger, and Finalized signal ledger. The user selects which internally generated signal stage establishes the entry reference and which stage can later provide an opposite-signal exit.
Each retained entry reference stores:
direction
confirmation bar
confirmation price
retained terminal price
The reference remains active until one enabled exit condition resolves it.
Available exit conditions include:
selected opposite BUY/SELL signal
confirmed close through the retained entry terminal
fixed minimum-profit target
entry-terminal risk/reward target
Opposite-signal exits, terminal exits, fixed-profit targets, and risk/reward targets remain separate exit identities. The script records the exit bar, exit price, resolved direction, and exit reason without rewriting the completed record after later chart history arrives.
This is not a complete strategy or automated trade-management engine. It does not submit orders, calculate position quantities, reverse broker positions, calculate complete strategy profitability, manage a portfolio, or route executable instructions. Its purpose is to show structured entry-to-exit reference behavior from the script’s own causal signal records.
How it works
The script first produces two internally retained signal stages:
Provisional
Finalized
The selected Entry Reference Stage determines which signal stage opens a retained entry reference.
The selected Opposite Exit Signal Stage determines which signal stage can later resolve that reference through an opposite BUY or SELL confirmation.
These two stages can be selected independently.
For example, a user can choose:
Provisional entry with Provisional opposite exit
Provisional entry with Finalized opposite exit
Finalized entry with Provisional opposite exit
Finalized entry with Finalized opposite exit
The script then processes entry-reference events and opposite-exit events in chronological order.
When both event streams contain an event on the same bar, the exit-stage event is processed before the entry-stage event. This prevents the new same-bar entry event from being incorrectly treated as active before the earlier reference has had a chance to resolve.
Provisional entry references
A Provisional entry reference is established from an accepted causal transform-path-agreed BUY or SELL confirmation.
Provisional confirmation requires the candidate direction to agree with the stored causal transform-reference direction.
A retained transform candidate can confirm:
on its candidate bar
or on the following closed bar
The maximum signal confirmation delay is limited to zero or one bar.
When Active Path-Filtered Candidate Memory is enabled, a valid candidate that initially fails transform-path direction agreement can remain stored. It can later confirm on the first closed bar where the retained candidate terminal agrees with the active causal transform direction.
That later passing bar becomes the actual Provisional confirmation bar and entry-reference price.
A Provisional signal is earlier than a Finalized signal, but it has not yet completed structural finalization. It can still be replaced, superseded, or fail to become the retained Finalized identity of its structural swing.
Finalized entry references
A Finalized entry reference is established from a Provisional signal that survives the selected structural resolver.
Finalized identity requires structural completion of the containing swing.
The Finalized reference uses:
the retained structural BUY or SELL identity
the Finalized confirmation bar
the Finalized confirmation price
the retained structural terminal price
Finalized references generally occur later than Provisional references, but they represent the signal identity retained after structural resolution.
Structural events classify and finalize signal identity. They do not independently create the Provisional BUY/SELL signal universe.
Entry-reference behavior
Only one entry reference can remain active at a time.
When no reference is active, the next qualifying event from the selected Entry Reference Stage establishes a new reference.
The reference retains:
long or short direction
entry confirmation bar
entry confirmation price
terminal price associated with that entry identity
The script does not continuously replace an unresolved reference with later same-side entry signals.
A new entry reference is committed only after the prior reference has resolved and the script is flat at the reference-state level.
The reference is an analytical state retained by the indicator. It is not a broker position and does not contain position size or account information.
Exit Resolution Method
The user selects one of three primary exit-resolution methods:
Opposite Signal
Entry Terminal Break
Opposite Or Terminal Break
Target exits are controlled separately and can operate alongside the selected primary exit method.
Opposite Signal
Opposite Signal resolves the active entry reference when the selected opposite signal stage confirms.
For a long reference, the selected SELL signal is the opposite event.
For a short reference, the selected BUY signal is the opposite event.
The opposite event uses the stage selected under Opposite Exit Signal Stage:
Provisional
or Finalized
The exit occurs at that opposite event’s confirmation price.
An opposite signal that does not oppose the currently active direction does not resolve the reference.
Require Profit For Opposite Exit
Require Profit For Opposite Exit applies only to opposite-signal exits.
When disabled, every qualifying opposite signal can resolve the active reference.
When enabled, the opposite signal resolves the reference only when the raw-price return from the retained entry price to the opposite confirmation price is at least the selected Minimum Profit For Opposite Exit percentage.
For a long reference, profit requires the opposite exit price to be sufficiently above the entry price.
For a short reference, profit requires the opposite exit price to be sufficiently below the entry price.
This setting does not delay or block:
Entry Terminal Break
Minimum Profit Target
Risk/Reward Target
An unprofitable opposite signal can therefore be ignored while another enabled exit condition remains active.
Minimum Profit For Opposite Exit is a gate on an opposite signal. It is not the same as the independent Minimum Profit Target exit.
Entry Terminal Break
Entry Terminal Break resolves the active reference when a confirmed close invalidates the retained entry terminal.
For a long reference:
a confirmed close below the retained terminal resolves the reference
For a short reference:
a confirmed close above the retained terminal resolves the reference
The terminal is taken from the same signal identity that established the entry reference.
The terminal is not replaced by every later support, resistance, pivot, or same-side signal.
Terminal exits use confirmed closes only.
An intrabar move through the terminal that does not remain broken at the confirmed close does not create a terminal exit under this script.
Opposite Or Terminal Break
Opposite Or Terminal Break enables both primary exit conditions.
The reference resolves on whichever valid event occurs first:
a qualifying opposite signal
or a confirmed terminal invalidation
When Require Profit For Opposite Exit is enabled, an opposite signal that does not meet the profit requirement is not treated as a valid exit. The terminal condition remains active and can still resolve the reference.
Target Exit
Target Exit is independent from the selected primary Exit Resolution Method.
Available target modes are:
Off
Minimum Profit %
Risk/Reward
When Target Exit is Off, no target price is calculated and no target exit can resolve the reference.
The status table displays:
OFF when the target mode is disabled
n/a when no entry reference is active
unavailable when a Risk/Reward target cannot be formed
the calculated target price when a valid active target exists
Minimum Profit Target
Minimum Profit % creates a fixed target from the retained entry-reference price.
For a long reference:
Target Price = Entry Price × (1 + Minimum Profit Target %)
For a short reference:
Target Price = Entry Price × (1 − Minimum Profit Target %)
The reference resolves when a confirmed close reaches or passes the calculated target.
For a long reference:
the confirmed close must be at or above the target
For a short reference:
the confirmed close must be at or below the target
The exit label is recorded as:
PROFIT TARGET
This target operates independently from Require Profit For Opposite Exit.
The two settings serve different purposes:
Minimum Profit For Opposite Exit controls whether an opposite signal is allowed to exit
Minimum Profit Target creates an independent price level that can exit without an opposite signal
Risk/Reward Target
Risk/Reward creates a target from the distance between the retained entry price and the retained entry terminal.
For a long reference:
Risk Distance = Entry Price − Retained Terminal
Target Price = Entry Price + Risk Distance × Risk/Reward Multiple
For a short reference:
Risk Distance = Retained Terminal − Entry Price
Target Price = Entry Price − Risk Distance × Risk/Reward Multiple
The target is valid only when the retained terminal is on the correct defensive side of the entry price and the resulting risk distance is positive.
For a long reference, the terminal must be below the entry price.
For a short reference, the terminal must be above the entry price.
When the terminal does not produce a positive risk distance, the Risk/Reward target is unavailable. The script does not invent a target by using an absolute distance or moving the terminal to the other side of the entry.
The reference resolves when a confirmed close reaches or passes the valid calculated target.
The exit label is recorded as:
RISK/REWARD TARGET
Confirmed-close target behavior
Both target modes use confirmed closes.
The script does not assume execution at the exact target price when price crosses the target intrabar.
The recorded exit price is the confirmed close of the bar that first satisfies the target condition.
This makes target resolution consistent with the script’s confirmed-close terminal-break behavior.
When a terminal break and target hit are both visible during the same scanned bar, terminal invalidation is given resolution priority in the code and the event is recorded as:
TERMINAL EXIT
Exit identities
The script preserves four separate exit identities:
OPPOSITE EXIT
TERMINAL EXIT
PROFIT TARGET
RISK/REWARD TARGET
These identities are not merged into one generic EXIT label.
This allows the user to distinguish whether the reference resolved because:
an opposite signal confirmed
the retained terminal failed
a fixed percentage target was reached
or the selected risk/reward target was reached
Completed exit records retain:
resolved direction
exit bar
exit price
exit reason
Later chart history does not move the completed exit to a different bar or change its recorded reason.
Signal construction
The internal signal engine uses a causal transform-reference path built from loaded raw-price records.
The transform path is used as a mandatory direction-agreement source for Provisional BUY and SELL confirmation.
The script separately maintains:
raw price arrays
transform path arrays
close, high, and low replay arrays
Provisional signal ledgers
Finalized signal ledgers
structural event ledgers
The transform path and structural resolver remain separate systems.
The transform path confirms Provisional signal direction.
The structural resolver determines which Provisional identity survives into the Finalized ledger.
A structural event does not directly create an entry reference unless Finalized is selected as the Entry Reference Stage and the corresponding Finalized signal record exists.
Transform Path Capturable Segment
Transform Path Capturable Segment percentage controls the captured movement required by the internal transform-reference path.
It is used to retain broader directional legs and reject smaller path pivots.
The setting affects transform-path construction and therefore can affect which candidates pass mandatory path agreement.
It is not an exit target and does not define minimum trade profit.
Structural resolution
The script includes three structural resolver options:
Earliest Terminal
Original Grouping
Conditional Accelerated
Original Grouping is the default.
Earliest Terminal
Earliest Terminal follows the known-prefix earliest terminal chain.
It is intended to retain the earliest causally provable structural terminal under the solver’s rules.
Original Grouping
Original Grouping retains same-side structural candidates as a group.
A later same-side candidate can replace the retained group extreme before an opposite structural candidate resolves the group.
The retained extreme becomes the finalized structural identity when the opposite side completes the structural transition.
Conditional Accelerated
Conditional Accelerated uses captured-path potential after structural proof.
The Structural Capturable Segment percentage applies only to this resolver.
It does not directly filter transform BUY/SELL events or calculate exit targets.
Structural records are prefix-stable and are committed permanently after confirmation.
Structural path and signal context
The script can display:
structural change labels
structural resolution path
Finalized transform BUY/SELL labels
Provisional Candidate signals
failed or superseded Provisional signals
path-disagreed Candidate labels
current live Candidate
live transform-reference path
confirmed support and resistance
These context displays do not change the selected entry-reference stage or exit-resolution method.
Turning a display off hides the object but does not remove its underlying retained ledger.
Entry and exit displays
Entry Reference Markers
Optional Entry Reference Markers show where the selected Provisional or Finalized entry reference was established.
These markers are display-only and do not represent submitted orders.
Resolved Exit Labels
Resolved Exit Labels show completed exit events.
Each label includes the exit identity determined by the resolution condition.
The script limits retained exit labels through the Maximum Exit Labels input.
Older labels are deleted from the chart when the display limit is exceeded. Their removal from the chart does not alter the chronological exit reconstruction used to determine the current active reference.
Active entry level
When Show Active Entry / Terminal Levels is enabled, the active entry confirmation price is displayed as a blue dotted line.
The line starts from the retained entry-reference bar and extends to the right while the reference remains active.
Active terminal level
When terminal-based resolution is enabled, the retained terminal is displayed as an orange dashed line.
For a long reference, this is the price below which a confirmed close produces a terminal exit.
For a short reference, this is the price above which a confirmed close produces a terminal exit.
Active target level
When a valid target mode is enabled, the target is displayed as a green dashed line.
The line appears only when:
an entry reference is active
the selected target mode is not Off
and the target calculation produces a valid price
Minimum Profit % generally produces a target whenever a valid entry price exists.
Risk/Reward requires a valid positive entry-to-terminal risk distance.
Support and resistance
Optional support and resistance levels are derived from confirmed signal terminals.
The user can:
show or hide the levels
extend the levels right
keep or remove broken levels
change line width
control the maximum number of managed chart objects
These levels provide contextual market structure.
They do not replace the retained entry terminal used by the exit-resolution module.
Replay and chronological reconstruction
The script reconstructs the entry-to-exit state from historical Provisional and Finalized signal ledgers.
The selected entry-stage ledger and selected opposite-stage ledger are merged chronologically.
The merge is linear rather than repeatedly sorting the complete combined event list.
This allows the script to preserve event order while avoiding the unnecessary quadratic event sorting that would become increasingly expensive as the number of signal records grows.
For each historical interval, the script checks:
whether the active retained terminal was invalidated
whether an enabled target was reached
whether a qualifying opposite event occurred
whether a new entry reference should be committed after the previous reference resolved
The reconstructed active state at chart end determines:
current active direction
entry price
retained terminal
target price
last exit reason
last exit bar
last exit price
Same-bar event priority
When an entry-stage event and exit-stage event occur on the same bar, the exit-stage event is processed first.
This preserves the prior active reference’s opportunity to resolve before a new reference from the same bar is committed.
It also prevents a newly created same-bar reference from being immediately interpreted as though it existed before the opposite event that appears at the same timestamp.
Performance controls
The script includes:
Statistics-Only Replay
Maximum Replay Objects
Auto Limit Live Replay
Live Replay Bars
Statistics-Only Replay reduces historical chart-object construction while retaining internal calculations.
Maximum Replay Objects limits the number of displayed historical objects.
Auto Limit Live Replay and Live Replay Bars can reduce the amount of live historical drawing on large charts.
These settings primarily control display and replay workload. They do not change the configured exit formulas.
Status pages
The status table includes separate pages for:
Exit State
Signals
Structural
Support/Resistance
Alerts
Guide
Exit State
The Exit State page displays:
selected Entry Stage
selected Opposite Stage
selected Resolution Method
active direction
entry price
retained terminal
last resolution reason
last exit bar
last exit price
selected Target Exit mode
current target price
Target-price display behavior is:
OFF when target exits are disabled
n/a when no reference is active
unavailable when a Risk/Reward target cannot be formed
the formatted target price when the target is valid
Signals
The Signals page summarizes the internal Provisional and Finalized signal state and selected signal context.
Structural
The Structural page displays selected structural resolver information and structural event context.
Support/Resistance
The Support/Resistance page displays level configuration and retained level state.
Alerts
The Alerts page shows whether resolved exit alerts are enabled and whether the current reconstruction produced a long-reference or short-reference exit event.
Guide
The Guide page explains the main output identities and chart-line colors:
retained entry reference
selected-stage opposite exit
confirmed terminal invalidation
target resolution
blue entry line
orange terminal line
green target line
Alerts
The script contains informational alerts for:
Provisional Transform BUY
Provisional Transform SELL
Finalized Transform BUY
Finalized Transform SELL
Long Reference Exit
Short Reference Exit
Provisional alerts are generated from accepted transform-path-agreed Provisional events.
Finalized alerts are generated when structural resolution commits a Finalized BUY or SELL identity.
Exit alerts identify whether a long or short entry reference resolved.
The exit alert title does not distinguish the exact reason in separate alertconditions. The exact chart label and status-table Last Resolution field identify whether the reconstructed exit was:
OPPOSITE EXIT
TERMINAL EXIT
PROFIT TARGET
RISK/REWARD TARGET
Alerts are informational.
They do not contain:
position size
broker account information
order type
stop order
limit order
routing destination
portfolio instruction
or guaranteed execution price
Important behavior note
The script should be understood as:
causal in its signal confirmation
historically stable after closed-bar confirmation
reconstructed chronologically from retained signal ledgers
live-updating only for current open-bar signal and path context
Closed-bar Provisional signals, Finalized signals, entry references, and completed exits are not moved or reclassified by later chart history.
The current open bar can update only the existing live Candidate and transform-reference context inherited from the internal signal engine.
Terminal and target exits use confirmed closes only.
The tool identifies analytical entry-to-exit reference events. It does not confirm that a real order was filled at the displayed price.
Features
Internally generated Provisional BUY/SELL signals
Internally generated Finalized BUY/SELL signals
Selectable Provisional or Finalized Entry Reference Stage
Selectable Provisional or Finalized Opposite Exit Signal Stage
Opposite Signal exit method
Entry Terminal Break exit method
Combined Opposite Or Terminal Break method
Optional profit requirement for opposite exits
Independent Minimum Profit Target
Independent Risk/Reward Target
Entry-to-terminal risk calculation
Confirmed-close target resolution
Confirmed-close terminal invalidation
Separate opposite, terminal, profit-target, and risk/reward exit identities
One retained active entry reference
Chronological entry and exit event reconstruction
Exit-first same-bar event ordering
Linear two-ledger event merge
Permanent closed-bar entry and exit records
Active entry price line
Active retained terminal line
Active target price line
Entry-reference markers
Resolved exit labels
Maximum retained exit-label control
Three selectable structural resolvers
Mandatory causal transform-path agreement
Candidate-bar or next-bar Provisional confirmation
Stored path-filtered Candidate memory
Provisional and Finalized signal ledgers
Failed and superseded Provisional context
Optional structural path
Optional live transform-reference path
Optional support and resistance
Replay and chart-object performance controls
Multiple status-table pages
Informational signal alerts
Informational long-reference and short-reference exit alerts
Strengths
Self-Contained Signal Source — generates its own Provisional and Finalized entry references without requiring another script’s external signal input.
Entry-to-Exit Structure — converts internal BUY/SELL identities into a retained reference with a clearly defined entry price, terminal, target, and exit reason.
Stage Flexibility — allows the entry stage and opposite exit stage to be selected independently.
Exit Method Flexibility — supports opposite confirmation, terminal invalidation, or whichever valid event occurs first.
Independent Target Logic — fixed-profit and risk/reward targets can resolve the reference without waiting for an opposite signal.
Opposite Profit Gate — can prevent an unprofitable opposite signal from resolving the reference while leaving terminal and target exits active.
Identity Separation — opposite, terminal, fixed-profit, and risk/reward exits remain distinguishable.
Terminal Consistency — uses the terminal retained by the same signal identity that established the entry reference.
Confirmed-Close Stability — terminal and target exits do not depend on unfinished intrabar movement.
Chronological Reconstruction — historical state is rebuilt in event order rather than inferred only from the latest signal.
Same-Bar Ordering — exit-stage processing precedes entry-stage processing when both events occur on the same bar.
Performance-Aware Merge — merges already chronological signal ledgers directly instead of repeatedly sorting a combined event array.
Long and Short Symmetry — applies entry, opposite, terminal, and target calculations to both long and short references.
Visual Clarity — separates entry price, terminal price, and target price with distinct chart lines.
Context Availability — retains optional Provisional, Finalized, structural, path, and support/resistance displays.
Weaknesses
Signal Dependence — exit quality depends on the quality and timing of the internally generated Provisional or Finalized entry reference.
No Universal Best Stage — Provisional entries are earlier but less structurally resolved; Finalized entries are more confirmed but later.
Confirmed-Close Delay — terminal and target exits can occur later than an intrabar crossing.
Close-Price Exit Recording — the recorded exit price is the confirmation-bar close, not necessarily the exact target or terminal price touched intrabar.
No Partial Exits — each retained reference resolves as one complete analytical state rather than splitting into multiple exit quantities.
No Trailing Target — the fixed-profit and risk/reward targets do not trail favorable movement.
Static Entry Terminal — the retained terminal belongs to the entry identity and is not dynamically replaced with every later structural level.
Risk/Reward Availability — a risk/reward target cannot be formed when the retained terminal is not on the correct defensive side of the entry price.
Opposite Profit-Gate Persistence — an opposite signal that fails the profit gate is ignored rather than stored as a pending opposite exit.
No Complete Strategy Return — the tool does not calculate commissions, slippage, quantity, capital allocation, or portfolio equity.
No Broker Execution — displayed exits and alerts do not prove that a real order would fill at the same price.
One Active Reference — the script does not maintain simultaneous independent long and short references or multiple scaled entries.
Historical Reconstruction Cost — although the event merge is linear, the script still performs substantial transform, structural, replay, and chart-object work on large charts.
Parameter Sensitivity — transform capture, structural solver, entry stage, opposite stage, target percentage, and reward multiple can materially change results.
No Universal Profitability — structured exits do not guarantee that the underlying entries have sufficient predictive edge.
Who it’s for
This tool is best suited for:
PulseWire users who want an exit-focused companion to transform-based entry signals
traders comparing Provisional and Finalized entry timing
users studying opposite-signal exit timing
users testing retained-terminal invalidation
users testing fixed minimum-profit targets
users testing entry-terminal risk/reward targets
reversal and market-structure traders
users who want long and short exit references
users who want historically stable closed-bar exit labels
users who want one retained entry reference at a time
users interested in causal transform-path agreement
users developing an exit framework before integrating position sizing or routing
research-oriented users comparing multiple exit identities
users who want chart-based exit analysis without a complete strategy engine
Who it’s not for
This tool is not best suited for:
users looking for guaranteed profitable exits
users expecting the script to know the best future exit in advance
users looking for automatic broker execution
users requiring position sizing or account-risk calculations
users requiring partial profit taking
users requiring multiple simultaneous entries
users requiring dynamic trailing stops
users requiring intrabar target or stop execution
users expecting target price to guarantee actual fill price
users wanting complete strategy-equity reconstruction
users wanting commissions, slippage, leverage, or margin modeling
users expecting Provisional or Finalized signals to universally identify profitable trades
users seeking a complete operational transform engine with split quantities, portfolio state, or order routing
Known limitations
The tool is better at:
retaining a consistent entry reference
showing multiple structured exit conditions
distinguishing why an exit occurred
comparing Provisional and Finalized signal stages
visualizing entry, terminal, and target prices
and reconstructing closed-bar entry-to-exit state
than it is at:
predicting which entry will succeed
guaranteeing that a selected target will be reached
guaranteeing that a terminal exit will contain loss
finding the best possible future exit
or reproducing real broker fills
A fixed-profit target can improve consistency but can also exit before a larger move develops.
A risk/reward target can align the target with entry-terminal distance, but the retained terminal may not represent the user’s actual financial risk or intended stop placement.
An opposite signal can respond to changing structure, but it can arrive late or be ignored when Require Profit For Opposite Exit is enabled and the profit requirement is not met.
A terminal exit can preserve the entry identity’s invalidation point, but confirmed-close evaluation can exit beyond the terminal after a fast move.
These are structural exit references, not guarantees of favorable trade outcomes.
Final note
Entry-to-Exit Tool is a focused indicator for converting internally generated Provisional or Finalized BUY/SELL signals into retained entry references and resolving those references through explicitly defined exit conditions.
Its main value is not that it predicts the perfect exit. Its value is that it makes the exit framework visible and consistent:
which stage opened the reference
which stage can provide the opposite exit
which terminal belongs to the entry
whether an opposite exit requires profit
whether a fixed or risk/reward target is active
which condition actually resolved the reference
and where that resolution occurred on a confirmed close
The tool should be viewed as an entry-to-exit analysis layer, not as a complete strategy, broker-execution system, or guarantee of profitability.
It provides more structured exit information than an entry-only signal script while stopping before quantities, partial positions, portfolio state, order routing, and full operational trade management. Indicator
Smart Money Toolkit Pro [JPT]🔷 OVERVIEW
Smart Money Toolkit Pro is an original Pine Script® v6 indicator that combines multiple Smart Money Concepts (SMC) into one clean and powerful trading tool. It automatically detects market structure, Break of Structure (BOS), Change of Character (CHoCH), liquidity levels, liquidity sweeps, and dynamic support/resistance to help traders analyze price action with confidence.
Designed for Forex, Gold (XAUUSD), Crypto, Stocks, Indices, and Futures, the indicator provides a clear visual representation of institutional market behavior without requiring manual chart drawing.
🔷 HOW IT WORKS
The indicator continuously scans price using confirmed pivot highs and lows.
Market Structure
The script automatically identifies:
• Higher High (HH)
• Higher Low (HL)
• Lower High (LH)
• Lower Low (LL)
These labels help traders understand whether the market is trending, ranging, or reversing.
Break of Structure (BOS)
A BOS is generated when price closes beyond a previous confirmed swing in the direction of the current trend.
Bullish BOS
Price breaks above a previous Swing High.
Bearish BOS
Price breaks below a previous Swing Low.
Change of Character (CHoCH)
A CHoCH signals a potential shift in market direction.
Bullish CHoCH
Price breaks above the previous Lower High.
Bearish CHoCH
Price breaks below the previous Higher Low.
This helps traders recognize possible trend reversals early.
Liquidity Engine
The built-in liquidity engine automatically plots:
• Buy-Side Liquidity (BSL)
• Sell-Side Liquidity (SSL)
• Equal Highs (EQH)
• Equal Lows (EQL)
The indicator monitors these areas for liquidity grabs and sweep events commonly associated with institutional trading activity.
Liquidity Sweeps
The script detects:
• Buy-Side Liquidity Sweeps
• Sell-Side Liquidity Sweeps
When a sweep occurs, the indicator marks the event directly on the chart, allowing traders to identify potential reversal opportunities.
🔷 VISUAL FEATURES
• Automatic Market Structure Labels (HH, HL, LH, LL)
• Break of Structure (BOS)
• Change of Character (CHoCH)
• Buy-Side Liquidity (BSL)
• Sell-Side Liquidity (SSL)
• Equal High Detection
• Equal Low Detection
• Liquidity Sweep Detection
• Dynamic Swing High & Low Levels
• Trend Background Coloring
• Liquidity Dashboard
• Trend Dashboard
• Professional Chart Layout
• Customizable Colors
🔷 DASHBOARD
The built-in dashboard displays:
• Current Trend
• Last Confirmed High
• Last Confirmed Low
• Active Buy-Side Liquidity
• Active Sell-Side Liquidity
• Latest Liquidity Event
This provides a quick overview of current market conditions.
🔷 INPUTS
Available settings include:
• Pivot Strength
• Show Structure Labels
• Show Swing Levels
• Extend Swing Levels
• Show BOS
• Show CHoCH
• Show Liquidity
• Show Liquidity Sweeps
• Show Equal High / Low
• ATR Tolerance
• Maximum Historical Liquidity Levels
• Bullish Color
• Bearish Color
• Liquidity Colors
🔷 ALERTS
Built-in alerts are available for:
• Bullish BOS
• Bearish BOS
• Bullish CHoCH
• Bearish CHoCH
• Buy-Side Liquidity Sweep
• Sell-Side Liquidity Sweep
Alerts can be connected directly to PulseWire's notification system.
🔷 COMMON WORKFLOW
A typical workflow is:
Wait for confirmed market structure (HH, HL, LH, LL).
Observe BOS or CHoCH confirmation.
Monitor Buy-Side and Sell-Side Liquidity levels.
Watch for liquidity sweeps around key swing points.
Combine confirmations with your preferred entry strategy and risk management.
🔷 MARKETS
Smart Money Toolkit Pro can be used on:
• Forex
• Gold (XAUUSD)
• Silver (XAGUSD)
• Cryptocurrency
• Stocks
• Indices
• Futures
• Commodities
Compatible with all PulseWire-supported timeframes.
🔷 BEST PRACTICES
For additional confirmation, many traders combine this indicator with:
• Support & Resistance
• Supply & Demand Zones
• Order Blocks
• Fair Value Gaps (FVG)
• Fibonacci Retracement
• EMA 50 / EMA 200 Trend Filter
• Volume Analysis
• Higher Timeframe Confirmation
These concepts are optional but can enhance decision-making when used alongside market structure.
🔷 UPCOMING FEATURES
Future updates may include:
• Institutional Order Blocks
• Fair Value Gap (FVG) Detection
• Premium & Discount Zones
• Auto Fibonacci Retracement
• Multi-Timeframe Market Structure
• Entry & Exit Signals
• TP1, TP2, TP3 Auto Targets
• Stop Loss Calculation
• Risk/Reward Visualization
• Advanced Smart Money Dashboard
• Session Analysis
• Volume Confirmation
🔷 DISCLAIMER
This indicator is provided for educational and informational purposes only. It highlights market structure and liquidity concepts based on historical price action and does not predict future market movements or guarantee trading performance. Always conduct your own analysis, use proper risk management, and consider additional market factors before making trading decisions. Indicator
Indicator
Indicator
EMA/SMA Classics V1.0 by SRTEMA/SMA Classics V1.0 by SRT
The EMA/SMA Classics indicator was designed to answer one simple question:
"Which side of the market currently has the structural advantage?"
Instead of flooding the chart with buy and sell arrows, this indicator focuses on market structure, trend alignment, and high-quality price action, allowing traders to make their own execution decisions with greater confidence.
Whether you trade Forex, Indices, Commodities or Crypto, this indicator combines multiple market concepts into a clean workflow while remaining highly configurable through both EMA and SMA combinations.
What This Indicator Includes
• Flexible EMA / SMA Engine
Unlike traditional moving average indicators that are locked to one MA type, every moving average in this indicator can independently be configured as either:
EMA
SMA
Default settings:
MA 1 : 7
MA 2 : 40
MA 3 : 150
MA 4 : 200
You may use the default configuration or customise the periods to fit your own trading methodology.
• Dynamic Moving Average Stack Detection
The indicator continuously evaluates whether the visible moving averages are properly stacked.
Bullish Stack
Fast MA > Medium MA > Slow MA
Bearish Stack
Fast MA < Medium MA < Slow MA
When the moving averages lose their proper order, the market is treated as neutral instead of forcing a directional bias.
This helps reduce many false trend signals that occur during consolidations.
• ATR-Based MA Spacing Filter
One common problem with MA strategies is entering when all moving averages have already compressed together.
This indicator measures the spacing between moving averages using ATR.
When the moving averages become too compressed, trend quality deteriorates.
The spacing filter helps identify these lower-quality environments before momentum fully develops.
• Ladder Structure
One of the core concepts inside this indicator is the Ladder System.
Instead of only observing moving averages, the indicator also evaluates the market using multiple dynamic support and resistance structures.
Resistance
R9
R40
R70
R100
R150
Support
S9
S40
S70
S100
S150
These levels automatically update with market structure and are used to generate an additional Ladder Bias.
When both the moving averages and Ladder Bias agree, market structure is generally stronger than relying on moving averages alone.
• Flush Dot System
The indicator displays visual Flush Dots beneath or above candles whenever trend alignment exists.
Small Green Dot
Bullish MA alignment.
Small Red Dot
Bearish MA alignment.
Large Green Dot
Moving Average alignment + Bullish Ladder confirmation.
Large Red Dot
Moving Average alignment + Bearish Ladder confirmation.
The larger dots represent stronger structural agreement across multiple components.
• KeyBar Detection
The indicator automatically identifies two important price action patterns.
Engulfing Bars
Bullish Engulfing (EBull)
Bearish Engulfing (EBear)
These are filtered using ATR and minimum body size to avoid insignificant candles.
Long Tail Bars (LTB)
Bullish Long Tail Bars
Bearish Long Tail Bars
These identify strong rejection candles with defined tail proportions and body positioning.
An optional body-size filter is also available for traders wanting stricter candle selection.
Daily Pivot (DP)
Automatically plots the previous day's pivot.
Useful as:
Dynamic support
Dynamic resistance
Intraday reaction level
Weekly Pivot (WP)
Automatically plots the previous week's pivot.
Many swing traders use weekly pivots as major reaction zones throughout the trading week.
RSI Momentum Alerts
The indicator includes two independent RSI event types.
RSI Breakout
Signals when RSI breaks into extreme momentum territory.
Bullish breakout
Bearish breakout
RSI Retracement
Designed to identify momentum continuation after RSI exits an extreme condition while confirming with the RSI Moving Average.
These alerts can be useful for traders looking to participate after momentum has begun to recover instead of chasing extremes.
Information Panel
A compact table summarises the current market condition.
Displays:
Moving Average Bias
Ladder Bias
Long Tail Bar presence
This provides a quick snapshot without needing to inspect every component individually.
How To Use This Indicator
This indicator is not designed to generate automatic Buy or Sell signals.
Instead, it acts as a Market Context Indicator.
A typical workflow may look like this:
Step 1
Observe whether the moving averages are properly stacked.
A clean stack generally indicates directional order.
Step 2
Check whether the Ladder Bias agrees with the moving averages.
When both align, the market structure is generally stronger.
Step 3
Watch for KeyBars.
Examples include:
Bullish Engulfing
Bearish Engulfing
Bullish Long Tail Bar
Bearish Long Tail Bar
These often represent meaningful reactions within the prevailing structure.
Step 4
Use Daily Pivot and Weekly Pivot as areas where price may react.
These levels should be considered areas of interest rather than guaranteed reversal zones.
Step 5
Monitor RSI alerts for momentum shifts.
Momentum signals are generally more useful when they occur in the same direction as the prevailing market structure.
Suitable Timeframes
Although the indicator can be applied to multiple chart intervals, it generally performs best on:
M15
M30
H1
H4
Daily
The moving averages, Ladder System, and KeyBar detection adapt naturally across different timeframes.
Difference Between EMA/SMA Classics & H1 EMA/SMA + Higher Timeframe Analysis (Classic)
Although both indicators belong to the same ecosystem, they serve different purposes.
EMA/SMA Classics
Designed as a general-purpose structural trend indicator.
Features include:
Flexible EMA/SMA stacking
Ladder System
Flush Dots
Engulfing Bars
Long Tail Bars
Daily Pivot
Weekly Pivot
RSI Alerts
It can be used on virtually any timeframe and is ideal for traders who prefer to analyse the chart directly.
H1 EMA/SMA + Higher Timeframe Analysis (Classic)
The H1 version is a significantly more advanced market context engine.
In addition to everything above, it introduces:
Dedicated H1 Bias Engine
H4 Trend Analysis
Daily Trend Analysis
Higher Timeframe Bias Aggregation
H1TF Composite Bias
Overall Market Verdict Engine
Multi-layer Bias Table
Higher Timeframe Confirmation Workflow
Rather than focusing solely on the current chart, the H1 version continuously evaluates whether multiple timeframes are aligned before presenting an overall market verdict.
If the EMA/SMA Classics indicator answers:
"What is my current chart doing?"
Then the H1 version answers:
"What is the broader market structure telling me across multiple timeframes?"
The two indicators are complementary and can be used together depending on your preferred trading workflow.
Disclaimer
This indicator is designed to assist with market structure analysis and decision-making. It does not provide financial advice or guarantee profitable trades. Always combine indicator signals with sound risk management, personal analysis, and appropriate position sizing. Indicator
