Essence ModelEssence Model — Bias - 7H Profiles - Entries
A complete, open-source implementation of my understanding of the Essence Model — a session-based intraday framework built on rytrades' teachings, extended with the 7-hour daily-profile taxonomy taught by AM Trades. The script reads the day the way the model does: previous day sets the bias, the overnight sessions validate or break it, the 7h profile names the day, and entries only exist where all of it lines up.
Daily Bias
The previous day's candle sets the directional bias. A fib from its high→close (bearish) or low→close (bullish) marks the 25% and 50% — bias stays valid while completed 210-minute candles respect the 25%. A close through it doesn't kill the day: the reversal framework flips the working direction ( "yesterday's 25% was broken to the upside — expecting higher" ), re-points the projections, and un-flips only if the 25% is reclaimed while the 50% held.
7H Frameworks & Profiles
Every day is classified on the 18:00 / 01:00 / 08:00 ET session grid:
F1 — Asia manipulates a valid level, London expands
F2 — London manipulates the Asia extreme, NY delivers
F3 — London protracts into a level, NY reverses
F4 — NY sweeps a London extreme; the candle's own close decides reversal vs continuation
P1 / P1B — the continuation profiles (Asia trends; London expands or coils)
P4 / P4B — the aligned day NY reverses, with or without the sweep
Frameworks are verified, not just assigned : a disproven read (London closing against an F1, NY breaking an F2/F3's level) is cleared and the day re-classified, with the audit trail shown. Valid levels come from previous-day extremes, daily swings, daily FVGs, and untaken weekly/monthly levels.
Confirmation Layer
The 210m is the model's confirmation timeframe: NY-phase decisions resolve on completed 210m candles, a 210m sweep-and-reclaim confirms the extreme of day ( LOD Asia✓ ), and cross-asset SMT (auto-paired for index futures, metals, forex, energy, treasuries, crypto) is drawn on the 1H / 210m / 7H mini-panels and stamps +SMT on confirmed extremes. An ADR exhaustion guard stands entries down when the overnight already consumed the day's range.
Entries
Protected-swing entries in the working direction: a CISD or a reversal signature ( RC / EC / IRC ) at its close — but only when a qualifying event ( SMT · FVG · LQ · C2 ) fired first inside the reversed leg. Event first, trigger after. The diamond marks the protected swing: entry at close, stop at the swing, 1R/2R drawn, invalidated the moment the swing is closed through. Default window 09:00–10:30, fully configurable.
Chart Elements
Quarter levels with projections, session shading and dividers, 8–9 AM range, daily FVG zones, floating 1H/210m/7H candle panels with sweep lines and SMT, framework header, and a five-line status readout (pair · bias state · setup grade · framework · ADR fill).
Credits
Concepts by rytrades (Essence Model) and AM Trades (7h profiles), with session-profile reads popularized by Hudson Trades. CISD / protected-swing engine adapted from my own open-source "Universal Po3 Profiler × CIC " (MPL-2.0). Asset pairing via fstarcapital/AssetCorrelationUtils. Published open-source under MPL-2.0.
Educational tool — nothing here is financial advice. Indicator
Indicator
Best ORB Detector Dynamic - Xcelerate TradeBest ORB Detector Dynamic - Xcelerate Trade
Built by the Xcelerate Trade team.
Opening Range Breakout (ORB) detector for Asia, London, and New York sessions.
Plots the ORB high/low, labels each session on history, and marks breakouts only AFTER the opening range is locked.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
BEST USED WITH
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Works well together with:
→ “Xcelerate - Best Sessions - New York, London & Asia”
→ “Fluid Liquidity Zones - CHoCH + Mitigation + HTF | Xcelerate Trade”
Use session context + structure first, then ORB break as timing.
Recommended chart timeframe: same as ORB window or lower (e.g. 1m–15m for a 15m ORB).
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW IT WORKS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
1) Choose one session: Asia / London / NY
2) Set the ORB window times (editable, Eastern Time — America/New_York)
3) During the window, high/low of the range are built
4) When the window closes, the range is LOCKED
5) Breakouts are detected only after lock (not while the range is still forming)
Default ORB windows (EST):
• Asia 19:00–19:15
• London 03:00–03:15
• New York 09:30–09:45
Change start/end in Inputs to match your ORB length (5 / 15 / 30 minutes).
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHAT YOU SEE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• ORB High / ORB Low — blue levels (Style colors editable)
• Session labels on history — e.g. “NY ORB 15m”, “Asia ORB 15m”
• Breakout flash — background highlight on first break (on by default)
• ORB High Break / ORB Low Break — arrows (off by default; enable in Style)
Alerts:
• ORB Session Start
• ORB Range Locked
• ORB High Breakout (after range)
• ORB Low Breakdown (after range)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO TRADE (SIMPLE)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
1) Wait for the ORB window to finish (label without “forming”)
2) Trade the first clean break of ORB High (long bias) or ORB Low (short bias)
3) Prefer confluence with Best Sessions box + Fluid Liquidity Zones / structure
4) One breakout flag per direction per session (no spam)
SKIP WHEN
• Break during the ORB window (range still forming)
• Chop / news spike through both sides of the range
• No session context and no higher-timeframe bias
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Times use America/New_York (DST handled by PulseWire)
• ORB Timeframe input should match how you resolve the window on the chart
• If you change ORB length (5/15/30), also adjust the session end time in Inputs
This indicator is built by the Xcelerate Trade team.
Visit: trading.xcelerate.trade
Indicator
Indicator
Indicator
swing alpha proTitle: swing alpha pro
Description:
swing alpha pro is a comprehensive trend-following and dynamic volatility analysis tool designed primarily for swing traders, position traders, and scalp traders across all financial markets (Forex, Crypto, Indices, and Commodities).
The indicator combines adaptive volatility envelope bands with trailing stop signal generation to identify high-probability trend entries, exit levels, and structural volatility boundaries.
Key Features & How It Works
1. Dynamic Support & Resistance Ribbons (Upper & Lower Bands)
Instead of cluttering the middle of the chart, the indicator plots two distinct, color-coded volatility channels:
Upper Resistance Ribbon (Red): Represents dynamic overbought conditions and structural volatility expansion to the upside.
Lower Support Ribbon (Green): Represents dynamic oversold conditions and volatility expansion to the downside.
The core channel area remains clean to allow clear candlestick pattern inspection.
2. UT Bot Signal Engine (BUY / SELL Signals)
Signals are generated using an adaptive ATR Trailing Stop calculation combined with key price action sensitivity settings:
BUY Signals (Green Labels): Plotted when the close price crosses above the trailing stop loss line, signaling a potential bullish momentum shift.
SELL Signals (Red Labels): Plotted when the close price breaks below the trailing stop loss line, signaling a potential bearish breakdown.
3. Automated Take Profit (TP) Levels & Visual Markers
When a valid signal triggers, the script calculates dynamic profit targets based on average true range (ATR) multiples (TP1 and TP2).
When price touches target levels, the script draws a subtle vertical line with an "x TP" marker directly on the candle to confirm objective target realization without clogging price action.
How to Use & Trading Strategy
Trend Identification:
Look for price respecting the Lower Green Ribbon as potential buying interest or the Upper Red Ribbon as resistance.
Entry Rules:
Long Entry: Wait for a confirmed green BUY label when price bounces off or recovers near the lower support ribbon.
Short Entry: Wait for a confirmed red SELL label when price rejects near the upper resistance ribbon.
Exit Rules & Risk Management:
Use the dynamic "x TP" vertical lines as partial or full profit-taking zones.
Place structural stop-losses beyond the opposing ribbon or the initial ATR trailing line.
User Inputs & Customization
Signal Sensitivity (aSens): Controls the responsiveness of the BUY/SELL signals (higher values reduce noise for longer swing timeframes; lower values increase frequency for lower timeframes).
ATR Period (aPeriod): Adjusts the volatility calculation length.
Channel Length (ribbonLen): Sets the baseline length for the upper and lower ribbons.
Upper/Lower Band Multipliers (multTop / multBot): Fine-tunes how far the resistance and support ribbons stretch from the mean price.
TP Multipliers (tpRatio1 / tpRatio2): Sets custom risk-to-reward ratios for Take Profit targets.
Disclaimer
This indicator is strictly intended for informational and educational purposes. Past performance is not indicative of future results. Always manage your risk carefully and backtest strategies before executing real trades.
Indicator
Strategy
Range Commander ORB [JOAT]An Opening Range Breakout command center: captures the opening range, projects measured-move targets, and tracks the breakout live.
◆ WHAT IT IS
The opening range — the high and low of the first minutes of a session — is one of the most-watched intraday reference structures. Range Commander captures it automatically, locks it into a clean box, and builds a full breakout and target framework around it. It is a context and structure tool: it maps the range, marks the breaks, and tracks the targets — it does not fire endless buy/sell arrows.
This is 100% original code, written from scratch. It does not reuse any other author's ORB script.
◆ HOW IT WORKS
1. Range capture. During your chosen session window (default 09:30–09:45 New York, fully adjustable with a timezone selector), the indicator records the running high and low into a live box.
2. Lock and project. When the window closes, the range locks. Its height becomes 1R , and the tool projects measured-move target rails at ±0.5R, ±1R and ±1.5R (all configurable), plus the range midline.
3. Breakout logic. A breakout is registered on either a close beyond the range (cleaner) or a wick beyond the range (faster) — your choice. An option stamps only the first break per side per day to keep the chart immaculate. A minimum range-size filter (in ATR) lets you skip dead, low-range opens.
4. Retests and targets. After a break, the first return to the broken edge is marked with a subtle diamond, and each measured-move target is tracked as hit or unhit in the dashboard.
◆ WHAT YOU SEE
• A precision opening-range box with high/low rails and optional midline
• Measured-move target rails at ±0.5R / ±1R / ±1.5R
• Minimal breakout stamps and retest diamonds — no arrow spam
• A resizable command dashboard with breakout status, OR high/low with intact-or-broken state, range height, range-versus-ATR quality (tight / normal / wide), which targets have printed, and retest status
◆ HOW TO USE IT
• Set the session window to match your instrument and desired ORB length (e.g. 0930-1000 for a 30-minute range).
• A wide range vs. ATR often signals a more energetic session; a tight range warns breakouts may be prone to failure.
• Use the ±R target rails as objective, pre-defined profit references and the opposite range edge as a natural invalidation.
• Designed for intraday timeframes . On daily and higher charts the session concept does not apply, and the dashboard will say so.
◆ NOTES & LIMITATIONS
Use on standard candlestick charts and intraday timeframes. Opening-range breakouts fail as well as follow through — the tool maps structure and targets, it is not financial advice and cannot guarantee a break will run. Combine it with your own analysis and risk management.
— made with passion by officialjackofalltrade
Indicator
MSH - Demand & Supply Zones Pro### Overview
The Demand and Supply Zones Pro indicator automatically identifies, plots, and tracks institutional market structure imbalance zones on your chart. Based on core Extended Market Structure (EMS) price action principles, it highlights areas where institutional supply or demand imbalances cause rapid price movements.
### Features & Methodology
1. Zone Identification Logic:
The indicator evaluates individual candlestick body-to-range ratios to classify candle types into:
- Base Candles: Consolidation or low-volatility bars where body size is ≤ 50% of total candle range.
- Leg-In / Leg-Out Candles: High-momentum, strong-body expansion candles.
2. Pattern Classifications (RBR, DBR, RBD, DBD):
- Demand Zones: Rally-Base-Rally (RBR) and Drop-Base-Rally (DBR).
- Supply Zones: Rally-Base-Drop (RBD) and Drop-Base-Drop (DBD).
3. Dynamic Zone Tracking & Boundaries:
- Proximal Line: Plotted at the top/bottom boundary of the base body for entry reference.
- Distal Line: Plotted at the extreme high/low wick of the base for stop-loss and risk reference.
- Dynamic Extensions & Violation Cleanup: Active zones extend automatically to current price action and are automatically removed once invalidating price breaks occur.
4. Trend & Moving Average Overlays:
- Includes integrated Rapid (EMA 7) and Fast (EMA 21) Exponential Moving Averages to quickly assess short-term momentum and trend alignment alongside zone levels.
### How to Use
- Looking for Demand Trades (Long): Seek long setups when price revisits active Green/Demand zones, especially when aligned with short-term EMA momentum.
- Looking for Supply Trades (Short): Seek short setups when price approaches active Red/Supply zones.
- Risk Management: Use the Distal boundary of the zone as a structural stop-loss level.
### Settings & Customization
- Candle Rules: Adjust body percentage thresholds for Base, Leg-In, and Leg-Out candles to match different asset classes (Equities, Forex, Crypto, Futures).
- Display Limits: Set maximum active zones displayed concurrently to maintain chart clarity.
- Visuals: Fully customizable zone fill, border colors, and label options. Indicator
Indicator
Indicator
Indicator
Polaris Sessions, Ranges, Levels & Liquidity StateSession ranges for Asia, London and New York, plus the reference levels a
session trader actually works from — with the state of each one shown rather
than left to be eyeballed.
WHAT IT DRAWS
• Asia, London and New York ranges, each labelled with the points it covered
• Session midlines — the 50% of each range
• Session highs and lows carried forward after the session closes. The range
stops mattering when the bell goes; the extremes do not. The Asia high is a
level through London and New York.
• Prior day high and low
• Overnight high and low
• Initial balance (first 60 minutes of the NY session) with a projected
extension of its own range
• Opening range, minutes configurable
• A shaded corridor between the last closed session's high and low, so you can
see at a glance whether price is still inside the range that session built
THE PANEL
Live session, today's three ranges, and whether the prior-day and overnight
levels are still intact or have been swept. "Intact" is the useful state — it
marks a price the market has not yet reached.
HOW IT BEHAVES
Sessions are defined against the exchange clock using session strings, so they
stay correct through daylight-saving changes and on charts opened from any
timezone. The CME day opens at 18:00 New York time, which is why the overnight
window spans 18:00 to 09:30 and crosses midnight.
Levels are drawn once, when the session closes and every value is final, and are
never modified afterwards. A level on a historical bar cannot move.
A session that was already in progress on the first bar your chart loaded is
skipped rather than measured. Its opening range would otherwise be "the first
sixty minutes of whatever happened to load", which changes as you scroll. The
leftmost day may therefore show no levels. That is deliberate.
Initial balance and opening range are hidden on timeframes too coarse to measure
them — an "initial balance" taken from a single 1H bar is just that bar's range.
Use a 1H chart or finer; the script says so on the chart if you are above that.
SETTINGS WORTH KNOWING
• Detail — Minimal, Balanced, Everything, or Custom. Balanced is the default.
Everything draws roughly forty objects per day of history, which is why it is
not: a level you cannot pick out of a stack is not a level.
• Days of history — how many sessions to keep drawn.
• Carry which sessions — by default only the session that just closed keeps a
corridor. Once London has closed, Asia's range is a level rather than a
corridor, and the prior-day and overnight lines already carry it.
• Carry for (bars) — how far session extremes project after the close. Bars,
not minutes: on a 1m chart 240 bars is four hours.
• Closed session box — fade, outline, keep or hide a box once its session ends.
Fading leaves the live session as the only solid block on the chart, so you
can see which session you are in without reading a clock.
• Label spacing — levels closer together than this share one label instead of
stacking. The line is always drawn; only the redundant text is suppressed.
• Timezone — defaults to New York.
• Every session window is editable if your instrument keeps different hours.
Nothing here is a signal or a recommendation. A prior day high is a price that
printed; what you do with it is your business. Indicator
Indicator
Key Levels Zone v1.5KEY LEVEL ZONE SUITE v1.5
The Key Level Zone Suite is a multi-timeframe market-structure indicator designed to organize important price levels into customizable zones instead of single horizontal lines.
The indicator combines session levels, daily reference levels, supply and demand, repeated-touch support and resistance, and confirmed swing points in one clean system. Every category can be independently enabled, customized, limited, and managed after price breaks through it.
Its purpose is to help traders identify areas where price may react, reject, consolidate, break, or reverse—while reducing chart clutter on lower timeframes.
FEATURES
SESSION OPEN ZONES
The indicator can display the exact opening prices of:
• Asia
• London
• New York
Each opening price is expanded into an adjustable zone. Opening prices are calculated using internal 1-minute data, helping maintain accurate session opens when the indicator is viewed on higher-timeframe charts.
Each session-open zone includes independent controls for:
• Visibility
• Session time
• Zone thickness in ticks
• Horizontal projection length
• Fill and border colors
• Maximum number of zones
• Text visibility
• Broken-zone behavior
Session-open zones are disabled by default but can be enabled individually.
SESSION HIGH AND LOW ZONES
The indicator can display completed high and low zones from the:
• Asia session
• London session
• New York session
For each session, traders can choose:
• Today
• Yesterday
• Both
Today’s high and low are added only after the selected session finishes. This prevents a developing session range from being mistaken for a finalized level.
Older session ranges are automatically cleared, preventing multiple days of session highs and lows from accumulating across the chart.
DAILY AND WEEKLY KEY LEVELS
The indicator includes:
• Daily Open
• Previous-Day High
• Previous-Day Low
• Previous Monday High
• Previous Monday Low
The Daily Open is calculated from the customizable trading-day session. By default, it uses the futures-style trading day beginning at 6:00 PM New York time.
Only the two newest Daily Open zones are retained, representing the current trading day and the previous trading day.
Previous-Day High and Low zones can be enabled when needed, with an adjustable number of previous-day sets.
The Monday levels represent the completed high and low from the latest Monday. Only the newest Monday pair is retained, so older Monday zones do not fill the chart.
SUPPLY AND DEMAND ZONES
Supply and demand zones are created from confirmed pivot points that produce a required move away from the area.
A supply zone requires:
• A confirmed pivot high
• A bearish move away from the pivot
• A move meeting the selected ATR-strength requirement
A demand zone requires:
• A confirmed pivot low
• A bullish move away from the pivot
• A move meeting the selected ATR-strength requirement
Supply and demand have their own calculation timeframe. This allows a trader to display zones from one selected timeframe while changing the chart timeframe.
For example, supply and demand can remain calculated from the 2-hour chart while the trader moves down to a 5-minute, 2-minute, or 1-minute execution chart.
Adjustable settings include:
• Calculation timeframe
• Pivot strength
• ATR length
• Required ATR move away
• Zone thickness
• Projection length
• Supply and demand colors
• Maximum supply zones
• Maximum demand zones
• Broken-zone behavior
• Text visibility
The default profile displays a maximum of four supply zones and four demand zones.
SUPPORT AND RESISTANCE ZONES
Support and resistance zones are created from repeated confirmed pivots near the same price.
A zone is displayed only after the required number of touches occurs within the selected tick tolerance.
Resistance is formed from matching pivot highs, while support is formed from matching pivot lows.
Adjustable settings include:
• Independent calculation timeframe
• Pivot bars to the left and right
• Minimum number of touches
• Matching tolerance in ticks
• Zone thickness
• Projection length
• Maximum support and resistance zones
• Colors and transparency
• Broken-zone behavior
• Text visibility
Because support and resistance use an independent source timeframe, their zones remain consistent when changing chart timeframes.
SWING-HIGH AND SWING-LOW ZONES
Confirmed swing highs and swing lows can also be displayed as zones.
These levels use adjustable pivot confirmation and an independent calculation timeframe.
Swing zones are disabled by default to keep the starting chart clean. They can be enabled when a trader wants additional market-structure levels.
MULTI-TIMEFRAME ZONES
Supply and demand, support and resistance, and swing zones each have independent calculation timeframes.
The selected source timeframe controls where the zone is created—not the current chart timeframe.
For example:
• Set supply and demand to 120 minutes
• Set support and resistance to 2 minutes
• View the chart on 1, 2, 5, or 15 minutes
The supply and demand zones will continue to represent the 2-hour structure, while support and resistance will continue to represent the 2-minute structure.
For multi-timeframe structural zones, projection length is measured using bars from the selected calculation timeframe.
ZONE-BREAK CONFIRMATION
A zone can be considered broken using either:
• Close
• Wick
Close mode waits for a candle to close beyond the zone and break buffer. This is the more conservative setting and helps prevent a temporary wick from invalidating a zone.
Wick mode considers the zone broken when the candle’s high or low crosses completely through the zone and buffer.
An adjustable break buffer, measured in ticks, can help prevent small overshoots or liquidity sweeps from immediately invalidating a level.
BROKEN-ZONE OPTIONS
Every category includes independent behavior for zones that are broken:
DELETE
The zone is completely removed from the chart.
FREEZE
The zone stops extending at the candle that broke it and remains visible for review.
SHORTEN
The zone stops actively extending and keeps only the selected number of bars after the break.
For example, an active zone projecting 20 bars ahead can be shortened to 10 bars after it breaks.
KEEP
The zone stops actively updating but retains its existing endpoint.
Broken zones can also use a separate fill color so traders can distinguish invalidated levels from active zones.
ZONE RETENTION AND CHART CLEANUP
The indicator contains several controls designed to keep lower-timeframe charts organized:
• Adjustable calendar-day history
• Global maximum number of zones
• Independent limits for each structural category
• Only two Daily Opens retained
• Only the latest Monday High and Low retained
• Today, Yesterday, or Both session-range selection
• Independent text switches
• Automatic removal of older zones
The default history is seven calendar days.
When a structural category exceeds its selected maximum, the indicator removes broken zones first. If no broken zones remain, it removes the oldest active zone.
This helps preserve the newest and most relevant active areas.
ZONE TEXT CONTROLS
Zone labels can be controlled using:
• A master text switch
• Session-open text
• Session high/low text
• Daily and weekly level text
• Supply and demand text
• Support and resistance text
• Swing-zone text
Turning off the text does not remove the zones. It only hides their labels, allowing for a cleaner visual layout.
ALERTS
The indicator can generate an alert whenever an active zone is broken.
To use this feature:
1. Enable “Alert when a zone breaks” in the indicator settings.
2. Open PulseWire’s alert window.
3. Select the Key Level Zone Suite.
4. Choose “Any alert() function call.”
5. Select the desired alert frequency and notification method.
HOW TO USE THE INDICATOR
1. SET THE CORRECT TIMEZONE AND SESSIONS
Begin by confirming the session timezone. The default is America/New_York.
The default session times are designed around futures trading:
• Asia: 6:00 PM–3:00 AM
• London: 3:00 AM–9:30 AM
• New York: 9:30 AM–4:59 PM
• Trading day: 6:00 PM–5:00 PM
Session behavior can vary by market, exchange, daylight-saving changes, and personal trading plan. Adjust these values when trading instruments that use different session schedules.
2. CHOOSE THE LEVELS YOU NEED
Avoid enabling every available zone at once.
A clean intraday setup can include:
• Asia High and Low
• London High and Low
• Yesterday’s New York High and Low
• Current and previous Daily Open
• Previous Monday High and Low
• Higher-timeframe supply and demand
• Lower-timeframe support and resistance
Swing zones and session opens can be added when the trading plan specifically uses them.
3. USE HIGHER-TIMEFRAME SUPPLY AND DEMAND FOR CONTEXT
The default supply and demand timeframe is 2 hours.
These zones can be used to identify broader areas where a significant reaction may occur. Traders can then move to a lower timeframe and look for entry confirmation inside or near the higher-timeframe zone.
Supply can act as a potential resistance area. Demand can act as a potential support area.
These areas should not automatically be treated as entry signals.
4. USE SESSION LEVELS FOR INTRADAY LIQUIDITY
Session highs and lows often represent important intraday liquidity areas.
Watch how price behaves when it approaches:
• Asia High or Low
• London High or Low
• Previous New York High or Low
• Daily Open
• Previous Monday High or Low
Price may reject the level, sweep beyond it and return, consolidate inside it, or break through it with momentum.
5. LOOK FOR CONFLUENCE
A zone becomes more meaningful when multiple independent factors appear near the same price.
Examples include:
• London Low overlapping a demand zone
• Asia High overlapping resistance
• Daily Open inside a support zone
• Previous Monday High near supply
• A session liquidity sweep followed by a market-structure shift
Overlapping zones do not guarantee a trade, but they can help identify areas that deserve closer attention.
6. WAIT FOR PRICE CONFIRMATION
The indicator identifies areas of interest; it does not produce automatic buy or sell signals.
Possible confirmation can include:
• Strong rejection candle
• Hammer or shooting-star formation
• Engulfing candle
• Liquidity sweep and close back inside the zone
• Break of structure
• Change of character
• Increase in volume
• Delta shift
• Retest after a confirmed breakout
Entering only because price touches a zone can expose the trader to levels that are being broken rather than respected.
7. PLACE RISK OUTSIDE THE ZONE
When using a zone for an entry, the invalidation point is commonly placed beyond the opposite side of the zone with an additional tick buffer.
The exact stop distance should account for:
• Instrument volatility
• Zone thickness
• Current ATR
• Session conditions
• The trader’s maximum allowed risk
A wider zone requires different risk management than a narrow zone.
8. USE THE NEXT OPPOSING ZONE AS A REFERENCE
Potential targets can be based on the next opposing area.
For a long setup, possible references include:
• Resistance
• Supply
• Session High
• Previous-Day High
• Previous Monday High
For a short setup, possible references include:
• Support
• Demand
• Session Low
• Previous-Day Low
• Previous Monday Low
Always confirm that the available distance supports the minimum risk-to-reward ratio required by the trading plan.
DEFAULT SETUP
The included default profile is designed to provide useful structure without displaying every possible level.
The main defaults include:
• Seven calendar days of history
• Maximum of 50 total zones
• Close-based break confirmation
• One-tick break buffer
• Session opening zones disabled
• Asia High and Low set to Today
• London High and Low set to Today
• New York High and Low set to Yesterday
• Daily Open enabled
• Previous-Day High and Low disabled
• Previous Monday High and Low enabled
• Supply and demand enabled on the 2-hour timeframe
• Maximum of four supply and four demand zones
• Support and resistance enabled on the 2-minute timeframe
• Maximum of two support and two resistance zones
• Swing zones disabled
• Supply, demand, support, resistance, and swing text hidden
IMPORTANT NOTES
Confirmed pivot-based zones require bars to the right of the pivot. This means supply, demand, support, resistance, and swing zones appear only after their pivot conditions have been confirmed.
Session highs and lows appear after their session finishes because the final high and low cannot be known while the session is still active.
The indicator is best used as a mapping and confluence tool alongside price action, market structure, volume, and disciplined risk management.
No zone guarantees a reversal. Strong momentum can break through any level, and a broken zone does not automatically confirm that price will continue in the same direction.
This indicator is intended for educational and analytical purposes only. It does not provide financial advice or guarantee future trading performance.
Indicator
[SkuldX] SFP Swing Failure PatternSkuldX Swing Failure Pattern — Institutional Liquidity Sweep Detector
by SkuldX Trading Systems
What is it?
SkuldX Swing Failure Pattern automatically detects one of the most powerful reversal setups in Smart Money and ICT trading. The Swing Failure Pattern occurs when price sweeps beyond a key swing level — triggering stop-loss orders clustered there — but then closes back within the previous range. This signals that institutional participants have absorbed the available liquidity and are now positioning in the opposite direction.
Unlike random false breakouts, the SFP has a precise structure: a meaningful wick beyond a swing high or low, a close that returns inside the range, and a visible rejection zone where the liquidity grab occurred. SkuldX SFP identifies all three automatically and displays them directly on the chart.
The mechanics
Every swing high and swing low acts as a magnet for stop-loss orders. Retail traders who are long place their stops just below swing lows. Retail traders who are short place their stops just above swing highs. Institutional participants know exactly where this liquidity sits.
An SFP forms when price is deliberately pushed beyond one of these levels to trigger those orders — collecting the liquidity — and then immediately reverses. The result is a candle with a long wick beyond the level and a close that returns inside the prior range. This is not a random failure. It is a deliberate liquidity grab followed by institutional repositioning in the opposite direction.
Two pattern types
🔴 Bearish SFP — price sweeps above a previous swing high with a wick but closes below it. The failed attempt to break higher signals that sellers have absorbed the bullish liquidity and are now in control. Expect a move downward.
🟢 Bullish SFP — price sweeps below a previous swing low with a wick but closes above it. The failed breakdown signals that buyers have absorbed the bearish liquidity and are now driving price higher.
What you see on the chart
Each detected SFP displays three visual elements simultaneously:
Label — appears above or below the candle with the signal direction and the exact price of the swept level. Instantly identifies the pattern without manual analysis.
Dashed line — marks the swing level that was breached. Extends from the beginning of the lookback window to the right, showing which structural level triggered the sweep. This level often acts as support or resistance in subsequent price action.
Rejection zone (box) — shaded area between the wick extreme and the swept level. This is the liquidity grab zone — the price range where stop orders were triggered and institutional positions were built. The size of this zone reflects how aggressively price was pushed beyond the level before reversing.
Quality filters
Two independent filters prevent low-quality signals from appearing on the chart.
Min Wick Size % of candle — requires the rejection wick to be at least a specified percentage of the total candle range. A small wick relative to the candle body suggests weak rejection. Default 0.5%. Increase to 2–3% on noisy instruments to require a more decisive rejection.
Min Breach Size % of level — requires the wick to extend at least a specified percentage beyond the swing level. A sweep that barely ticks beyond the level carries less significance than one that pushes meaningfully through it. Default 0.05%. Increase to 0.1–0.2% for stricter confirmation.
Both filters can be set to zero to show all detected patterns without filtering.
Settings reference
Swing Lookback (bars) — defines how many bars back to search for the swing high or low that gets swept. Default 10. Lower values find more local patterns, higher values require more significant swing levels. On 15m charts, 10 bars covers approximately 2.5 hours of price history.
Min Wick Size % of candle — minimum upper or lower wick as a percentage of the total candle range
Min Breach Size % of level — minimum distance the wick must extend beyond the swing level
Show Bullish / Bearish SFP — independent toggles for each direction
Show Labels — toggles the signal label above or below the candle
Show Level Line — toggles the dashed line at the swept swing level
Show Rejection Zone — toggles the shaded box between the wick and the level
Zone Extend — how many bars to the right the zone and line extend
Label Size — tiny, small, or normal
Bullish / Bearish Color — independent color control for each direction
Zone Transparency — opacity of the rejection zone fill
Line Width — thickness of the swept level line
Data Window
Hovering over any bar shows binary flags for Bullish SFP and Bearish SFP detection, the current swing high and swing low values used as reference levels, the upper and lower wick percentages, and the breach percentage of the swept level. These values are useful for calibrating the quality filters to your specific instrument and timeframe.
How to use it in practice
Entry timing — the SFP signal fires on the bar where the rejection occurs. The most aggressive entry is at the close of that candle. A more conservative approach is to wait for the next candle to confirm continuation in the reversal direction before entering.
Stop placement — place the stop-loss beyond the wick extreme, outside the rejection zone. The wick tip represents the furthest point of institutional manipulation — price returning beyond it invalidates the pattern.
Take-profit targets — common targets are the opposite swing extreme, a session High or Low from the current day, or the next significant structural level. The swept swing level itself often acts as resistance or support on the retest.
Timeframe selection — SFP signals are most reliable on 15m and above. On very low timeframes the pattern appears frequently but with lower conviction. On 1h and 4h the signals are rarer but carry significantly more institutional weight.
Confluence — the highest-probability SFP setups occur when the swept level coincides with a session boundary. A bearish SFP that sweeps the Asian High during London session is a classic institutional liquidity grab setup. A bullish SFP at Asian Low during the NY Overlap is one of the strongest intraday reversal signals available.
Volume context — a sweep accompanied by above-average volume confirms institutional participation. A low-volume sweep may indicate a thin market move rather than a deliberate liquidity grab.
Common mistakes to avoid
Entering immediately on the wick without waiting for the candle to close. The pattern is only valid after the close confirms the rejection — a candle that is still forming may yet close beyond the level as a genuine breakout.
Trading every SFP signal regardless of context. The pattern is significantly more reliable when it sweeps a level that has been respected multiple times previously, when it occurs during a high-liquidity session window, and when it aligns with the broader directional bias.
Using too small a lookback. A swing high from 3 bars ago carries far less liquidity than one from 10–15 bars ago. Increase the lookback if signals feel too frequent or structurally insignificant.
Built for SkuldX ecosystem
SkuldX Swing Failure Pattern is designed to work alongside the full SkuldX indicator suite. The most reliable SFP setups emerge when multiple layers of context align simultaneously:
A bullish SFP at the Asian Low after the Asian session closes — detected by SkuldX Trading Sessions — suggests institutional accumulation before London or NY drives price higher
A bearish SFP at the Asian High during London session with ADR Used % above 80% — from SkuldX ADR Levels — indicates both a liquidity sweep and statistical range exhaustion at the same level
An SFP confirmed by a Bullish Trend or Bearish Trend reading in SkuldX OI Delta adds institutional conviction — new positions opening in the reversal direction confirm the sweep was not random
An SFP that forms at a level already flagged by SkuldX Level Patterns as a multi-touch support or resistance zone carries significantly more weight than one at a fresh untested level
Each indicator in the suite adds an independent dimension of confirmation. Using them together reduces noise and improves the quality of setups without adding complexity to the decision process.
Indicator
HTF Time Markers [twr]HTF Time Markers
This indicator plots higher-timeframe (HTF) period boundaries directly on your current chart, giving you a clean visual reference for where each new HTF candle begins — without needing to switch charts or add a separate HTF overlay.
Key Features
Auto Timeframe Detection — Automatically selects an appropriate HTF based on your current chart resolution (e.g. 5m chart → 15m markers, 1H chart → 4H markers), or set a manual timeframe if you prefer full control.
Two Display Modes
Full Height — draws a vertical line stretching across the entire chart at the start of each new HTF period.
Session Range — draws a live-updating box confined to the actual high/low range of the developing HTF candle, expanding in real time as the period forms.
HTF Open Price Line — Plots a horizontal line at the open price of each HTF candle, independent of the vertical marker settings. Choose how it extends:
Until Next Period — stops automatically where the next HTF candle begins.
Full Right — extends indefinitely into future bars.
Full Chart — extends across the entire chart in both directions.
Useful as a quick reference for whether price is trading above or below the current HTF open — a key reference level in many ICT/SMC frameworks.
Smart Timestamp Labels — Each vertical marker is labeled with contextual text that adapts to the timeframe:
Sub-weekly HTFs show time and weekday (e.g. "09:30 / Monday"), or weekday-only if preferred.
Weekly HTFs show the week-of-month (e.g. "Week 2").
Monthly, Quarterly, and Yearly HTFs show calendar-relative labels (month name, quarter number, or year) instead of a redundant time stamp, since higher-timeframe opens always land on the same weekday/time.
Timezone Control — Labels are calculated using a selectable timezone (default America/New_York), so your markers align with the session times your strategy is actually built around, rather than the raw exchange timezone.
Full Styling Control — Independently adjust color, width, and style (solid, dotted, dashed) for both the vertical markers and the open line, plus label size and a configurable cap on how many historical markers/lines are kept on the chart.
How It Works
The indicator tracks the start of each new HTF bar using request.security and draws a vertical marker at that boundary. In Session Range mode, the box continues updating its top/bottom/right edges on every bar until the HTF period closes, giving you a live read on the developing range. At the same time, an independent open-price line is plotted at the HTF candle's opening price and extended according to your chosen mode. Older markers and lines are automatically pruned once you exceed your configured maximums, keeping the chart uncluttered.
Use Case
Useful for traders who reference higher-timeframe context (e.g. 4H, Daily, Weekly opens) while executing on a lower timeframe, and want both a visual cue for where each HTF candle starts and a persistent open-price reference level — without constantly toggling chart resolutions. Indicator
LASER Trading Cockpit v7.0LASER Trading Cockpit is a real-time market-state and trade-quality dashboard designed primarily for intraday futures trading. It combines auction structure, momentum, volume, RSI behavior, volatility compression, key levels, and risk/reward into a single compact decision-support system.
The goal of LASER is not to predict the next candle. It is designed to answer a more practical question:
“Is there currently enough structure, location, momentum confirmation, and available room to justify a trade?”
LASER organizes setups into two primary thesis families:
C — Continuation: A pullback or reaction within an existing directional auction where price shows evidence of resuming the prevailing move.
MR — Mean Reversion / Reversal: A stricter setup requiring a meaningful excursion or extreme, evidence of trend deterioration, a reaction at the extreme, momentum rotation, and a change of state. MR is intended to identify situations where the prior directional auction may be failing rather than simply fading price because it looks extended.
The cockpit continuously evaluates both long and short possibilities and assigns each qualifying thesis a score. Depending on the selected preset, the minimum qualification score is 60 for Aggressive, 70 for Neutral, or 80 for Conservative. A score alone does not generate a trade signal. Risk, stop distance, available room, direction settings, cooldown, and other execution gates must also pass before a FIRE can occur.
The HUD includes:
Regime: STRONG UP, TREND UP, STRONG DOWN, TREND DOWN, BALANCE, or TRANSITION, along with a balance score measuring rotational/choppy market behavior.
Auction: Displays whether price is inside value, testing beyond VAH/VAL, being accepted outside value, or experiencing a failed auction.
Long / Short Scores: Displays the strongest current Continuation or Mean-Reversion thesis for each direction.
RSI: Shows current RSI along with RSI rate of change and acceleration rather than relying only on traditional overbought/oversold readings.
RSI Divergence: Tracks recent bullish and bearish regular divergence. DIV+ identifies stronger divergence where price made a materially deeper extreme without equivalent RSI confirmation. The HUD also shows divergence age, price overshoot in ATR, and whether the RSI pivot occurred within a preferred contextual zone.
Squeeze / Energy: Internally evaluates Squeeze Momentum behavior and classifies states such as COMPRESSED, PRESSURIZED, EARLY EXPANSION, BULL/BEAR EXPAND, RE-EXPAND, and DECEL.
Evidence: Displays directional confluence using compact modifiers including DIV, DIV+, EXH, FA, SW, STR, ABS, BOA, SQZ, and HV.
Volume: Classifies supported, high, and extreme relative volume along with directional volume and possible absorption.
Risk / Room: Calculates the proposed stop distance in points and compares it with the distance to the nearest known opposing structure or key level. For example, L 18.0p / 2.0R means approximately 18 points of defined risk with two risk units of open space available before the nearest recognized resistance.
Trade State: Tracks the most recent LASER FIRE, entry, stop, TP1, and optional TP2.
Evidence abbreviations
DIV = RSI Divergence
DIV+ = Strong RSI Divergence
EXH = Exhaustion
FA = Failed Auction
SW = Liquidity Sweep
STR = Structure Shift / Retest
ABS = Absorption
BOA = Breakout Acceptance
SQZ = Squeeze / Volatility Expansion Evidence
HV = High Relative Volume
LASER also incorporates developing Volume Profile information including VAH, VAL, and POC, along with configurable previous-session, previous-week, Globex, Asia, London, and NYSE reference levels. These levels can be used internally by the decision engine without necessarily being displayed on the chart.
One important feature is the distinction between READY and FIRE. READY means a directional thesis has reached the required score. FIRE means the setup has also passed the final execution requirements such as acceptable stop size, minimum available room, cooldown, and direction filters.
Realtime behavior / repainting
LASER includes an optional Require Closed Candle setting. When enabled, FIRE signals require the candle to close before confirmation. When disabled, signals may appear, disappear, and reappear during the formation of the live candle as price, RSI, volume, structure, and momentum change. This is intentional realtime behavior and allows traders to see when a setup is approaching qualification.
LASER is intended as a decision-support and market-structure tool, not an automated trading system or guarantee of future performance. Users should apply their own risk management, execution judgment, and testing before using any signal in live trading.
The indicator was developed primarily around intraday futures trading, with particular emphasis on auction behavior, value migration, pullback continuation, exhaustion, failed auctions, momentum rotation, and defined-risk execution. Indicator
MTF SMC / ICT Market State Engine# MTF SMC / ICT Market State & Reversal Dashboard
A multi-timeframe market-structure dashboard designed for traders using **Smart Money Concepts (SMC), ICT, liquidity and price-action analysis**.
The indicator combines structural information across **1D, 4H, 15M and 1M** into a single compact dashboard, helping traders identify the current **directional bias, market stage, liquidity condition and potential reversals** without having to manually compare multiple timeframes.
### What the Dashboard Shows
For each timeframe, the dashboard displays:
* **Bias** — Bullish, Bearish or Neutral
* **Structure** — HH/HL, LH/LL, BOS, MSS or CHOCH
* **Market Stage** — Accumulation, Liquidity Build, Manipulation, Confirmed Shift, Expansion, Retracement, Continuation, Exhaustion, Distribution or Reversal
* **Liquidity** — BSL, SSL, EQH, EQL and recently swept liquidity
* **Reversal State** — Normal, Reversal Warning, Reversal Developing or Confirmed Reversal
* **Structural Confidence** — Low, Medium or High
### Multi-Timeframe Bias
The indicator treats each timeframe according to its role in the market hierarchy:
**1D → Macro Bias**
**4H → Primary/Intraday Bias**
**15M → Setup & Market Structure**
**1M → Execution Structure**
This allows the indicator to distinguish between a genuine trend reversal and a simple lower-timeframe retracement.
For example:
**1D Bullish → 4H Bullish → 15M Bearish → 1M Bearish**
may be classified as:
> **HTF BULLISH / LTF RETRACEMENT**
rather than incorrectly changing the overall bias to bearish.
### Reversal Detection
The indicator does not treat every liquidity sweep or MSS as a confirmed reversal.
Reversal conditions progress through four stages:
**Normal → Reversal Warning → Reversal Developing → Confirmed Reversal**
A stronger reversal requires multiple structural factors such as:
* Liquidity sweep
* Displacement
* MSS/CHOCH
* Protected high/low violation
* Structural follow-through
This helps separate **liquidity manipulation and retracement** from an actual change in market structure.
### Market-State Engine
Rather than displaying disconnected SMC signals, the indicator interprets them as part of a market cycle:
**Accumulation → Liquidity Build → Manipulation → Confirmed Shift → Expansion → Retracement → Continuation → Exhaustion → Reversal**
The purpose is to answer four key questions:
> **What is the market direction?**
> **What stage is the market currently in?**
> **Where is the relevant liquidity?**
> **Is the market continuing, retracing or beginning a reversal?**
### Designed for SMC / ICT Traders
The indicator is intended as a **market-analysis and decision-support tool**, not an automatic trading system.
It does not attempt to predict future price or provide guaranteed buy/sell signals. Instead, it organizes multi-timeframe structural information into a clear framework so traders can make more consistent discretionary decisions.
**Primary workflow:**
**1D Bias → 4H Structure → 15M Setup → 1M Confirmation → Liquidity → Market Stage → Reversal Status**
Indicator
Indicator
Entry Checklist Panel## The 13 checklist points, explained
**1. Trend breaks swing / bias** — Is the market actually trending right now? The script looks at recent swing highs and lows and checks if price has been making higher highs and higher lows (uptrend) or lower highs and lower lows (downtrend) two times in a row. If yes, there's a real trend to trade with.
**2. Pullback small + low volume** — When price pulls back against the trend, is that pullback small and quiet, not a big aggressive move? A weak, low-volume pullback suggests the trend is just resting, not reversing.
**3. Volume match move** — Was the volume during the actual trending move bigger than the volume during the pullback? If the trend candles had more participation (volume) than the pullback candles, that's a sign the trend is the "real" move and the pullback is just noise.
**4. 9EMA/VWAP close** — Are the 9-period moving average and VWAP sitting near each other (within 1%)? If they're far apart, price is stretched too far in one direction and may need to cool off before continuing.
**5. Entry near 9EMA/VWAP** — Is your actual entry price close to one of those two reference lines? Entering too far away from either means you're chasing price rather than getting a fair, supported entry.
**6. Breaking ORB high/low** — Has price broken above or below the opening range (the high/low set in the first several minutes of the session)? This is often the sign that a real directional move for the day is starting.
**7. Key level out of way (manual)** — Is there a support/resistance line you've drawn nearby that price hasn't cleared yet? You check this yourself — if a key level is sitting right in the way, it's not a clean entry.
**8. 200/400 SMA not in the way** — Are the longer-term moving averages either trending clearly, or is price already clear of both? If they're flat and price is tangled up in them, that's resistance/support you'd be fighting.
**9. FTFC aligned (manual)** — Does your "timeframe continuity" indicator agree with the direction you want to trade? You check this yourself since it depends on a separate tool.
**10. SL makes sense (manual)** — Is your stop-loss placed sensibly — not too wide, with room to reach your target, and beyond the levels that would prove you wrong? A judgment call only you can make.
**11. Not consolidating at entry** — Is the current candle showing real movement, or is price just chopping sideways in a tight range? Trading during dead chop is a losing habit; this row checks for actual expansion.
**12. Bid/ask held 5s (manual)** — For quick order-book-based (BW) entries: did the price actually hold at your entry level for a few seconds instead of just flickering through it? You confirm this yourself in the moment.
**13. Pullback engulfed (manual)** — Did the move back in your favor "engulf" (fully cover) the pullback candle before you? Not required, but it's a stronger signal when it happens — you judge this by eye. Indicator
Auto Pattern Detector Targets [MarkitTick] Thinh 9/8/26Pivot Lookback Right: 10, 23
● Các mô hình được phát hiện
Đỉnh đôi: Mô hình đảo chiều giảm giá bao gồm hai đỉnh liên tiếp ở gần cùng mức giá, báo hiệu sự cạn kiệt xu hướng tiềm năng.
Đáy đôi: Mô hình đảo chiều tăng giá với hai đáy liên tiếp ở các mức tương tự, cho thấy sự chuyển dịch tiềm năng từ áp lực bán sang áp lực mua.
Đỉnh ba: Mô hình đảo chiều giảm giá được đánh dấu bằng ba đỉnh riêng biệt ở mức kháng cự tương tự, phản ánh sự thất bại liên tục trong việc phá vỡ mức cao hơn.
Đáy ba: Mô hình đảo chiều tăng giá được đặc trưng bởi ba đáy liên tiếp ở mức hỗ trợ tương tự, cho thấy sự tích lũy mạnh mẽ.
Đầu và Vai: Mô hình đảo chiều giảm giá cổ điển với một đỉnh trung tâm cao hơn được bao quanh bởi hai đỉnh thấp hơn, thể hiện sự mất đà tăng.
Đầu và Vai ngược: Mô hình đảo chiều tăng giá bao gồm một đáy trung tâm thấp hơn được bao quanh bởi hai đáy cao hơn, cho thấy sự chuyển dịch sang xu hướng tăng.
Cờ tăng giá: Mô hình tiếp diễn ngắn hạn được hình thành bởi sự tăng giá mạnh mẽ tiếp theo là sự tích lũy hẹp, dốc xuống.
Cờ giảm giá (Bearish Flag): Mô hình tiếp diễn xảy ra trong xu hướng giảm, trong đó sự giảm mạnh được theo sau bởi một giai đoạn tích lũy hẹp, dốc lên.
Cờ hiệu tăng giá (Bullish Pennant): Mô hình tiếp diễn được xác định bởi sự tăng mạnh, tiếp theo là giai đoạn tích lũy hình tam giác hội tụ đối xứng. Cờ hiệu
giảm giá (Bearish Pennant): Mô hình tiếp diễn có đặc điểm là sự giảm mạnh, tiếp theo là sự hình thành hình tam giác hội tụ trước khi tiếp tục giảm.
Nêm tăng (Rising Wedge): Mô hình đảo chiều hoặc tiếp diễn, trong đó giá tích lũy giữa các đường xu hướng hội tụ dốc lên, thường báo hiệu sự suy yếu tiềm tàng.
Nêm giảm (Falling Wedge): Mô hình được hình thành bởi các đường xu hướng hội tụ dốc xuống, thường là tiền thân của một sự đột phá tăng giá.
Tam giác (Triangle): Giai đoạn tích lũy, trong đó giá thu hẹp giữa các đường xu hướng hội tụ, cho thấy sự đột phá sắp xảy ra (Tăng dần, Giảm dần hoặc Đối xứng).
Hình chữ nhật (Rectangle): Phạm vi giao dịch, trong đó giá di chuyển theo chiều ngang giữa các mức hỗ trợ và kháng cự song song, cho thấy sự lưỡng lự trước khi đột phá.
Cốc và tay cầm (Cup and Handle): Mô hình tiếp diễn tăng giá giống như một chiếc cốc, tiếp theo là sự giảm giá nhẹ, cho thấy tiềm năng cho một đợt tăng giá mới.
Mô hình Cốc và Tay cầm ngược: Một mô hình tiếp diễn giảm giá được hình thành bởi một chiếc cốc và tay cầm ngược, báo hiệu áp lực giảm giá.
## Chiến lược Mục tiêu Mô hình Tự động — bởi Code2trade
Chiến lược **Auto Pattern Detector Targets** tự động quét thị trường để tìm **16 mô hình biểu đồ kinh điển**, bao gồm Đỉnh & Đáy đôi, Đỉnh & Đáy ba, Vai & Đầu, Vai & Đầu ngược, Cờ, Cờ hiệu, Nêm, Tam giác, Hình chữ nhật, Cốc & Tay cầm, và nhiều hơn nữa.
Khi một tín hiệu phá vỡ hợp lệ được xác nhận bằng cách sử dụng các bộ lọc tích hợp của chiến lược, một thiết lập giao dịch hoàn chỉnh sẽ được tạo ra với các mức **Vào lệnh**, **Cắt lỗ** và **Chốt lời** được xác định trước dựa trên mức độ di chuyển được đo lường của mô hình được phát hiện.
### Cách thức hoạt động
* Liên tục phát hiện các mô hình biểu đồ có xác suất cao bằng cách sử dụng các điểm xoay.
* Chờ tín hiệu phá vỡ được xác nhận trước khi tạo tín hiệu.
* Tự động tính toán Điểm vào lệnh, Cắt lỗ và Mục tiêu.
* Mở vị thế Mua cho các tín hiệu phá vỡ tăng giá và vị thế Bán cho các tín hiệu phá vỡ giảm giá.
* Sử dụng mức Cắt lỗ dựa trên mô hình ban đầu và Mục tiêu được đo lường từ chỉ báo.
* Tùy chọn thoát khỏi vị thế hiện có khi xuất hiện tín hiệu ngược chiều.
### Logic giao dịch mặc định
* **Vào lệnh:** Lệnh thị trường sau khi tín hiệu phá vỡ được xác nhận.
* **Cắt lỗ:** Mức vô hiệu hóa mô hình.
* **Chốt lời:** Mục tiêu di chuyển được tính toán từ mô hình đã phát hiện.
* **Quy mô vị thế:** Số lượng cố định (mặc định là 1 hợp đồng).
* **Gia tăng vị thế:** Đã tắt.
### Các tính năng chính
* Nhận diện mô hình hoàn toàn tự động.
* Thực hiện giao dịch khách quan, dựa trên quy tắc.
* Loại bỏ việc vẽ mô hình chủ quan.
* Hỗ trợ cả giao dịch Mua và Bán.
* Được xây dựng trực tiếp từ logic chỉ báo gốc mà không thay đổi quy trình tạo tín hiệu.
### Tuyên bố miễn trừ trách nhiệm rủi ro
Chiến lược này chỉ dành cho mục đích giáo dục và nghiên cứu. Kết quả kiểm thử ngược trong quá khứ không đảm bảo hiệu suất trong tương lai. Luôn luôn tự mình kiểm thử và áp dụng quản lý rủi ro thích hợp trước khi sử dụng chiến lược trên thị trường thực tế. Strategy
Indicator
