Indicator
Indicator
Indicator
Indicator
[ A L P H A X ] VECTOR - Regime-Adaptive Flow EngineAlphaX VECTOR — Regime-Adaptive Flow Engine: Kaufman ER Regime Classification, KAMA Vector Line, Multi-Component Flow Score & Scalping-Optimized Entry Playbooks
AlphaX VECTOR is a professional-grade scalping system built around a fundamentally different architectural premise from every other indicator in the AlphaX suite: the market regime is identified first, and the entry playbook is selected automatically to match that regime. Most scalping systems apply the same entry logic regardless of whether the market is trending, ranging, or chopping — and then wonder why the same setup works brilliantly in one context and fails consistently in another. VECTOR solves this at the architectural level by running a three-metric regime classification engine (Efficiency Ratio, Choppiness Index, and ADX) that determines the current market character on every bar and locks in one of four states: Trend Bull, Trend Bear, Balance/Range, or Chop. Each state activates a different set of entry playbooks — micro-pullbacks to the Vector Line in trends, micro-impulse breaks in balance or trend, mean-reversion fades at band extremes in balance — and all entries are filtered through a 6-component Flow Vector score that measures the directional conviction of the current market from five independent dimensions. The result is a system where every signal is not just directionally filtered, but regime-appropriate — built for M1 through M15 scalping on gold, forex, indices, and crypto.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🧭 The Core Philosophy — Regime First, Setup Second
The single biggest failure mode in scalping is applying trend-following entries in choppy markets and mean-reversion entries in trending markets. The market character changes continuously — a trending gold session can collapse into a tight range within minutes, and a balance period can explode into a directional impulse with no warning. Any fixed system that ignores this regime cycle will have extended periods of consistent losses whenever the market shifts character.
VECTOR's architecture inverts the standard approach. Instead of picking a setup type and then trying to filter bad signals, VECTOR determines the market's current character first — with three independent quantitative measurements — and then selects the correct playbook for that character. In Trend Bull, only pullback and impulse break setups fire. In Balance, only impulse breaks and band fades fire. In Chop, nothing fires. The dashboard explicitly tells you the active playbook at all times: SCALP PULLBACK ▲, SCALP PULLBACK ▼, SCALP FADE / BREAK, or NO TRADES.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 The Regime Engine — Three Independent Classifiers
The regime is determined on every bar by three completely independent measurements. The combination of all three produces a robust, multi-dimensional picture of market character that no single indicator alone could provide.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Kaufman Efficiency Ratio (ER)
The Efficiency Ratio measures how directionally efficient price movement has been over the lookback period (default: 10 bars). It divides the net directional change in price by the total path traveled — the sum of all individual bar-to-bar movements. A ratio close to 1.0 means every bar moved in the same direction — maximum efficiency, maximum trend. A ratio close to 0.0 means the total path traveled far exceeds the net movement — price oscillated back and forth with no net progress — maximum chop, minimum efficiency.
ER thresholds:
ER ≥ 0.35 (trend minimum) — price is moving with high directional efficiency. The market is trending and momentum setups are appropriate
ER ≤ 0.22 (chop maximum) — price is oscillating with low efficiency. Combined with low ADX, this triggers the CHOP regime and blocks all signals
Between thresholds — transitional state. Not clear trend, not clear chop
The ER is displayed live on the dashboard with color coding — yellow-green when in trend territory, orange when in chop territory, neutral otherwise. This single number tells you the fundamental quality of price direction at any given moment.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Choppiness Index
The Choppiness Index (CI) provides an independent measure of market randomness using a logarithmic ratio formula. It calculates the sum of all individual ATR readings over the lookback period (default: 14 bars) divided by the total high-low range of that period. High CI values indicate the range of the period was consumed by oscillating ATRs — choppy movement. Low CI values indicate the period's range was established by directional movement.
CI interpretation:
CI above 61.8 — the market is in a Golden Ratio chop zone. Institutional consensus is absent. All signals are suppressed when this threshold is exceeded (configurable, default: 61.0)
CI below 38.2 — maximum trending efficiency. In practice, CI values this low indicate an impulsive directional move in progress
CI between 38.2 and 61.8 — transitional territory, neither pure trend nor pure chop
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ADX (Average Directional Index)
The ADX provides the most widely recognized trend strength measure, confirming whether a directional bias measured by ER and CI is backed by genuine momentum. ADX above the configured minimum (default: 20) is required for Trend Bull or Trend Bear regime classification. Below the minimum, even if ER is high and CI is low, the system classifies as Balance rather than Trend — the directional efficiency exists but the momentum confirmation is absent.
Combined regime logic:
CHOP (0) — CI above threshold OR (ER below chop max AND ADX below trend min). The market is in an untradeable oscillating state. Dashboard shows ⛔ CHOP — STAND ASIDE. All signals blocked
TREND BULL (1) — not chop, ADX above trend min, ER above trend min, Flow Vector positive, price above Vector Line. Playbook: SCALP PULLBACK ▲
TREND BEAR (2) — same conditions with Flow Vector negative and price below Vector Line. Playbook: SCALP PULLBACK ▼
BALANCE (3) — not chop, but ADX or ER conditions for trend not met. Market is directional enough for scalping but not in a clear trend. Playbook: SCALP FADE / BREAK
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📈 The KAMA Vector Line — Adaptive Trend Reference
The Vector Line is a Kaufman Adaptive Moving Average (KAMA) — the same ER-weighted adaptive EMA that forms the basis of the regime classification. It is the central price reference for all pullback entries and a key component of the Flow Vector score.
Why KAMA over a standard EMA: A standard EMA responds with the same speed regardless of market conditions. In a trending market, the EMA lags price and creates false pullback signals. In a choppy market, it whipsaws. KAMA self-adjusts — it moves quickly in trending conditions (tracking price closely) and moves slowly in choppy conditions (staying stable). This means the Vector Line acts as an accurate, self-calibrating trend reference that naturally tightens around price during strong trends and widens away from price during chop.
Vector Line color coding: The line is plotted in gradient color based on the current Flow Vector score — bright yellow-green when the Flow Vector is strongly positive (above the Strong Vector threshold), bright red when strongly negative, fading to semi-transparent in neutral territory. At a glance, the Vector Line's color tells you the directional conviction of the current market.
Vector Line price: The exact current Vector Line price is displayed on the dashboard as VECTOR LINE in real time — the precise price level where pullback entries are being monitored.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚡ The Flow Vector — 6-Component Directional Score
The Flow Vector is a composite directional score ranging from -100 (maximum bearish conviction) to +100 (maximum bullish conviction). It is computed on every bar from six independent measurements, each capturing a different dimension of directional bias.
Component 1 — EMA Stack (up to ±22 points):
A triple EMA (8/21/50) full stack alignment — EMA 8 above EMA 21 above EMA 50, with price above EMA 8 — scores +22 points for bull, -22 for bear stack. Partial alignment (price simply above or below EMA 21) scores ±8. This is the momentum structure layer.
Component 2 — Vector Line Slope (up to ±18 points):
Whether the KAMA Vector Line is currently rising or falling. A rising Vector Line in a bull trend confirms the adaptive average is itself accelerating — ±18 points. This ensures the entry direction is aligned with the KAMA's own momentum, not fighting it.
Component 3 — OBV Slope (up to ±15 points):
The slope of On-Balance Volume over the configured lookback period (default: 10 bars). A rising OBV slope means net buying pressure is accumulating (each up-close bar adds volume, each down-close subtracts). A falling slope confirms net selling. ±15 points. This is the volume accumulation/distribution layer — independent of price movement.
Component 4 — Volume Delta (up to ±12 points):
The estimated directional volume pressure — bull volume EMA minus bear volume EMA using the candle range position method. ±12 points. This captures intrabar volume directional bias as opposed to OBV's inter-bar accumulation bias.
Component 5 — HTF EMA Bias (up to ±18 points):
The higher timeframe EMA structure — fast EMA above slow EMA with close above fast EMA (bull) or the inverse (bear). ±18 points. This ensures the Flow Vector reflects the macro institutional direction, not just the current timeframe's local momentum.
Component 6 — Price vs Vector Line (up to ±15 points):
Whether the current close is above or below the KAMA Vector Line. ±15 points. Price above the Vector Line in a bull regime confirms the pullback has not reached the Vector Line yet (trend intact). Price below confirms the line has been reached or breached (potential reversal zone).
Flow Vector thresholds:
+40 to +100 — strong bull flow. Setup A (Trend Micro-Pullback) long entries require this minimum
+65 to +100 — extreme bull flow. Used as a fade signal when combined with upper balance band touch
-40 to -100 — strong bear flow. Setup A short entries require this minimum
-65 to -100 — extreme bear flow. Fade signal condition for lower band touches
-39 to +39 — neutral flow. Directional conviction insufficient for Trend regime entries
Flow Acceleration:
In addition to the absolute score, VECTOR checks whether the Flow Vector is currently accelerating — increasing for two consecutive bars (bull) or decreasing for two consecutive bars (bear). Acceleration is a hard requirement for Setup A (Trend Micro-Pullback) entries, ensuring the entry occurs when flow is building rather than stalling or reversing.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🕯 Scalping Candle Quality — The Pin Bar Filter
VECTOR applies a specific, tight candle quality standard for all entry types — the scalping pin bar. All four conditions must be simultaneously true:
Bull pin bar requirements:
Bullish close (close above open)
Lower wick covers at least 42% of the total bar range — the rejection of the low is dominant
Upper wick is at most 32% of the total range — no significant selling into the close
Body size at least 0.10× ATR — not a doji or near-doji
Close in the upper 28% of the bar range (upper quartile) — the bar closed strongly bullish
Bear pin bar requirements: The mirror conditions — upper wick dominant (42%+ of range), lower wick minimal (32% max), small minimum body, close in the lower quartile.
Why this specific candle quality standard for scalping: Scalping entries are executed in the wick of the signal candle — buying at the low of a bull pin bar, selling at the high of a bear pin bar. A candle that lacks a dominant rejection wick provides no clear structural fill level. The upper quartile close requirement for bulls ensures the rejection was decisive — not a bar that dipped into support and then closed mediocre. These parameters are significantly stricter than the standard 50% wick filter used in MERIDIAN and PIVOT, reflecting the precision required for scalping entries.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🏷 Four Setup Types — Regime-Gated Playbooks
VECTOR implements four distinct setup types, each activated only in the appropriate regime state. The active playbook is displayed on the dashboard as a PLAYBOOK row, telling you exactly which setups are available right now.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Setup A — Trend Micro-Pullback (Regime: Trend Bull or Trend Bear only)
The primary VECTOR scalp entry. Fires in Trend Bull regime for longs, Trend Bear for shorts.
Full condition stack for long:
Regime is Trend Bull (regime == 1)
Flow Vector is strongly bullish (≥ +40)
Flow Vector is accelerating (rising for two consecutive bars)
Price has touched the EMA 8 or Vector Line from above — the micro-pullback has reached the trend reference level. Touch tolerance is ±0.22× ATR (configurable)
A qualifying bull pin bar has formed at the touch
The recent 5-bar low has dipped into the EMA 8 / Vector Line zone (confirming the touch was genuine, not just proximity)
Price is not extended above the Vector Line by more than the maximum extension setting (default: 1.0× ATR) — the anti-chase filter
RSI(7) is between 40 and 70 — not already overbought, not in a capitulation zone
Why this is the core scalp setup: In a confirmed Trend Bull regime with accelerating flow, the EMA 8 and Vector Line are the natural pullback magnets. Institutional buyers who are long in the trend use these levels to add on dips. The pin bar at the level confirms they stepped in. The anti-extension filter prevents chasing a move that has already run 1× ATR above the Vector Line — exactly the stretch that precedes a deeper pullback.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Setup B — Micro Impulse Break (Regime: Trend or Balance)
A momentum continuation scalp that fires when price breaks out of a micro swing range with a qualifying body and volume delta confirmation.
Key conditions for long:
Regime is Trend Bull or Balance (the setup fires across both regimes as momentum can develop in either)
Price closes above the highest high of the last 4 bars (configurable lookback) on the previous bar — a genuine micro swing break
The break bar's body meets the minimum body threshold (default: 0.85× the impulse body minimum × ATR)
Volume delta is positive — buying pressure drove the break
A qualifying bull pin bar is present on the break bar
HTF bias aligns — long only when the higher timeframe confirms bullish
Price is not over-extended above the Vector Line (anti-chase filter)
What this setup captures: The breakout from a micro consolidation range with volume confirmation — the intrabar equivalent of a structure break. On a 1-minute chart, a 4-bar micro range that breaks with a strong body and bull delta is a clean scalp entry with a tight stop at the bottom of the range. In Balance regime, this setup provides the best entries because the market character does not support pullback trades but does support momentum breaks on sufficient flow.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Setup C — Range Fade / Band Extreme (Regime: Balance only)
The mean-reversion scalp. Fires only in Balance regime when price reaches the outer balance band with an exhausted or reversing Flow Vector.
Short fade conditions:
Regime is Balance (regime == 3)
Price has touched the upper balance band (within 0.08× ATR of the upper band)
The Flow Vector is either in extreme bull territory (≥ +65, meaning the move to the band is overextended) OR the flow is beginning to fade (Flow Vector is falling and was recently above +53)
A qualifying bear pin bar confirms the rejection at the band
RSI(7) is above 58 — confirming the RSI is elevated at the band touch, consistent with a reversal setup
Why band fades only fire in Balance: In a Trend Bull regime, price touching the upper balance band is a continuation event — the trend is simply pushing to the next level. Fading that in a trend produces the most reliable losses in scalping. Setup C is therefore hard-gated to Balance regime only, where the market has proven it is oscillating rather than trending, and the balance band genuinely represents a mean-reversion boundary.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Setup D — Vector Shift / Flow Zero-Cross (Off by default)
A legacy setup type that fires when the Flow Vector crosses from negative to positive (long) or positive to negative (short) with a strong body candle and positive volume delta. Off by default on fast timeframes because flow zero-crosses on M1–M5 produce excessive noise. Available for traders who want to experiment with flow momentum entries on H1+ timeframes where the zero-cross carries more structural weight.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🧠 The 7-Point Scalp-Weighted Confluence Score
VECTOR uses a setup-weighted scoring system specifically calibrated for scalping frequency and quality:
Score structure:
Setup Type (up to 2 points) — primary setups (Trend Micro-Pullback, Micro Impulse) score 2 points. Secondary setups (Range Fade, Vector Shift) score 1 point. This weighting reflects that Setup A and B have more prerequisite conditions and are inherently higher quality
Flow Acceleration (1 point) — Flow Vector is actively building in the signal direction over the last two bars. Ensures the entry coincides with momentum building, not stalling
HTF Bias (1 point) — higher timeframe EMA confirms the signal direction
Volume Expansion (1 point) — current bar volume exceeds the volume average by the configured minimum (default: 1.05×)
Non-Chop Market (1 point) — the market is not in Chop regime. This point is also enforced as a hard gate — signals cannot fire in Chop regardless of the score
RSI(7) Filter (1 point) — the 7-period RSI is in the acceptable zone for the signal direction (40–70 for longs, 30–60 for shorts)
Maximum score: 7. Default minimum: 4. The scalp-weighted system means that a Setup A or B entry with flow acceleration, HTF alignment, and volume can reach 5 points from the setup type, flow, HTF, and volume components alone — a clean high-quality signal. Setup C entries require more supporting factors to reach the threshold because their 1-point setup score means more of the other layers must confirm.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🛡 Anti-Chase & Quality Filters
VECTOR includes several anti-chase and quality gates specifically designed for scalping precision that do not appear in the other AlphaX indicators.
Extension Filter: No long signal fires if price is already above the Vector Line by more than the configured maximum extension (default: 1.0× ATR). No short signal fires if price is already below by that much. This single filter eliminates the most common scalping failure — entering a pullback after it has already run too far from the reference level, leaving insufficient room for the signal to develop before hitting the stop.
Dip/Rip Confirmation: For Setup A entries, the 5-bar lowest low (bull) or highest high (bear) must have reached within a tight ATR tolerance of the reference lines. This confirms that the touch was genuine — price actually dipped into the zone — rather than just being close to it without contacting it.
RSI(7) Micro Filter: A 7-period RSI gate blocks entries when RSI is already overbought (above 70 for longs) or in a knife-catch zone (below 40 for shorts). On scalping timeframes, entering a long when 7-bar RSI is already at 75 means you are entering after the move is exhausted. This filter alone dramatically reduces the worst class of setup A false signals — those that occur when price is touching the EMA 8 on the way back down through it rather than bouncing off it.
Flow Acceleration Requirement: Setup A requires the Flow Vector to be accelerating (not just positive) for two consecutive bars. A stale, high but flat Flow Vector indicates the move is decelerating — the opposite of the momentum condition that produces clean scalp continuations.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 Scalp Entry Reference — Wick-Based Positioning
Unlike the other AlphaX indicators where the entry is taken on the close or next open, VECTOR's entry reference is the rejection wick of the signal candle — specifically the bar's low (for bull signals) or high (for bear signals). This is the optimal scalp fill zone.
Why the wick, not the close: A scalp pin bar with a 42%+ lower wick has a significant low-to-close range. Entering at the close gives up nearly half that range unnecessarily. The institutional scalp entry is at the wick extreme — the exact level where buyers stepped in and stopped the selling. A limit order at the bar's low (bull) captures the optimal risk/reward because the stop goes below that low, and the full bar range is available as immediate profit space.
Entry reference visualization: A cross marker is plotted at the signal bar's low (bull) or high (bear) — the wick entry reference — distinct from the signal triangle. This gives you the precise price at which to place a limit order if you prefer limit entry over market-on-open execution.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 Live Dashboard
The 17-row real-time dashboard displays the complete internal state across five sections.
REGIME
Market Regime — current regime state with icon: ⛔ CHOP — STAND ASIDE, ▲ TREND BULL, ▼ TREND BEAR, or ◆ BALANCE / RANGE. This is the primary trading context indicator
Playbook — the active setup playbook matching the current regime: NO TRADES, SCALP PULLBACK ▲, SCALP PULLBACK ▼, or SCALP FADE / BREAK. Tells you exactly which setup types can fire
Flow Vector — the live composite Flow Vector score with + or - sign. Yellow-green when strongly positive, red when strongly negative, neutral otherwise
METRICS
Efficiency — current Kaufman Efficiency Ratio value. Yellow-green when in trend territory (≥ threshold), orange when in chop territory (≤ chop max)
Chop Index — current Choppiness Index value. Orange when above the stand-aside threshold
ADX — current ADX value. Yellow-green when above the trend minimum
Vol Delta — ▲ BUYERS or ▼ SELLERS based on the current volume delta direction
FILTERS
HTF Bias — ▲ BULL, ▼ BEAR, or — FLAT
Session — ✓ ACTIVE or ✗ OFF
CONFLUENCE
Bull Score — live 0–7 score. Background highlights yellow-green when threshold is met and regime is not Chop
Bear Score — live 0–7 score. Background highlights red when threshold is met and regime is not Chop
Vector Line — the exact current KAMA Vector Line price, color-coded by Flow Vector strength
Live confluence label: During non-chop regimes, a small B x/7 · S x/7 label appears near the Vector Line on the current bar, updating in real time.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📈 Chart Visual System
KAMA Vector Line — the adaptive trend reference line, color-coded by Flow Vector strength. Bright yellow-green when bull flow is strong, bright red when bear flow is strong, fading to semi-transparent in neutral/weak territory
Balance Bands (upper, lower, midline) — the Bollinger-style bands used as reference for Balance regime and Setup C fade entries. Purple-tinted at low opacity
▲ Label with setup tag (below bar, yellow-green) — bull scalp signal. Tag shows A, B, C, or D identifying which setup type fired. Tooltip shows the full setup description
▼ Label with setup tag (above bar, red) — bear scalp signal
Entry Reference Cross (× marker) — plotted at the signal bar's low (bull) or high (bear) — the optimal scalp limit entry price
SL Guide (red dotted circles) — stop loss reference below the EMA 8 and Vector Line minimum (bull) or above (bear), plus ATR buffer
TP Guide (yellow-green dotted circles) — dynamically computed reward target at R multiple
Regime Change Labels (optional) — small labels at regime transition bars showing TREND ▲, TREND ▼, or BALANCE. Off by default — regime visible on dashboard
Live confluence label — B x/7 · S x/7 near the Vector Line on the current bar
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🚀 How to Trade with AlphaX VECTOR — Step by Step
Step 1 — Read the Regime First
Check the Market Regime row on the dashboard. ⛔ CHOP — do nothing, close the chart if needed. ◆ BALANCE — Setup B and C available. ▲ TREND BULL or ▼ TREND BEAR — Setup A is active
Check the Playbook row — it tells you exactly which setup type is currently firing-eligible
Note the Flow Vector value. Above +40 in Trend Bull is the optimal Setup A environment. Below +40 but still positive suggests the trend may be weakening
Step 2 — Prepare the Level
In Trend Bull, identify where the Vector Line is currently sitting (Vector Line on dashboard). This is your Setup A anchor level — watch for price to pull back toward it
Note the EMA 8 on the chart. For Setup A, price must touch either EMA 8 or the Vector Line — whichever is closest to price is the active support
In Balance, note where the upper and lower balance bands sit. These are the Setup C fade boundaries
Step 3 — Enter on the Signal Label
A ▲ label below the bar with setup tag is the core scalp signal — Trend Micro-Pullback long. All conditions including regime, flow acceleration, line touch, pin bar, RSI, and extension filter are confirmed
The entry reference × marker shows the wick low — the optimal limit order price
The SL guide is at the minimum of EMA 8, Vector Line, and the bar low, minus ATR buffer. This is a tight structural stop designed for scalping
The TP guide is at the R-multiple target. Default 2.0R for a tight scalp stop produces a larger absolute target than most other AlphaX indicators due to the compressed ATR-based stops
Step 4 — Manage the Scalp
Scalp trades in VECTOR are short-duration by design — move the stop to breakeven after any meaningful move in your favor
Watch the Flow Vector on the live label — if it drops below +40 during a long trade, the bull flow is weakening. Consider taking profit early
If the regime changes to Chop during an open trade, take profit immediately — the market character has changed and the setup's underlying logic no longer applies
Setup A targets in strong Trend Bull regimes can be extended toward the band extremes. In strong trends, the first R-target is often just the beginning of a larger move
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠ Identifying Low-Quality Conditions — When Not to Trade
Stand aside when:
Market Regime shows ⛔ CHOP — this is the clearest possible signal to step back. No signals will fire, and any manual entries during chop carry statistically negative expectation on scalping timeframes
Chop Index above 61 on the dashboard — even if regime hasn't fully shifted to CHOP, a CI above 61 is a warning that market character is deteriorating. Reduce size or stop trading
Flow Vector is between -39 and +39 — the directional conviction is insufficient for Setup A. In this zone, the market is neither clearly bullish nor bearish at the flow level. Wait for the vector to commit above ±40
Flow Vector is high but flat (no acceleration) — a Flow Vector at +55 that has been flat for 5 bars means the momentum is stale. Setup A requires active acceleration, not just a high score. The signal will be blocked, but the absence of acceleration is itself a warning
HTF Bias opposes the signal direction — scalping against the higher timeframe institutional flow is the highest-risk scalp. If HTF shows BEAR and you are attempting Setup A longs, every entry is fundamentally counter-trend
RSI(7) is above 70 at a bull pin bar — the 7-bar RSI filter will block the signal, but if you see a bull pin at the Vector Line with RSI at 72, it is a warning that the touch is occurring after an overbought condition rather than at a healthy pullback
Regime changes rapidly between states — if the regime is cycling between Trend Bull and Balance or Balance and Chop multiple times per session, the market is in an indecisive transition phase. These transitions produce the most noise and the lowest signal quality across all setup types
The ideal VECTOR scalp setup:
Trend Bull or Trend Bear regime sustained for 5+ bars
Flow Vector at ±55 or above, actively accelerating
HTF aligned with regime direction
Price pulling back cleanly to the Vector Line / EMA 8 zone with a tight, contained range
Bull or bear pin bar with lower/upper wick of 50%+ of range, closing in the upper/lower quartile
RSI(7) between 45–60 for longs or 40–55 for shorts — the healthy pullback RSI zone
Volume above average, volume delta confirming direction
Score at 5/7 or higher
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚡ Key Features
🧭 Three-metric regime classification engine — Kaufman Efficiency Ratio, Choppiness Index, and ADX combined to classify every bar as Trend Bull, Trend Bear, Balance, or Chop
📊 Active playbook display — dashboard tells you exactly which setup type is eligible right now: SCALP PULLBACK ▲/▼, SCALP FADE / BREAK, or NO TRADES
📈 KAMA Vector Line — adaptive moving average that tightens in trends and stabilizes in chop, providing the most accurate scalp reference line available
⚡ 6-component Flow Vector — EMA Stack, KAMA Slope, OBV Slope, Volume Delta, HTF Bias, and Price vs Vector Line combined into a -100 to +100 directional conviction score
🔴 Flow Acceleration detection — Setup A requires the Flow Vector to be actively building for two consecutive bars, blocking stale or decelerating flow entries
🏷 Four regime-gated setup types — Setup A (Trend Micro-Pullback), Setup B (Micro Impulse Break), Setup C (Balance Band Fade), Setup D (Vector Shift, off by default)
🕯 Strict scalping pin bar standard — lower/upper wick ≥ 42% of range, opposing wick ≤ 32%, minimum body, close in upper/lower quartile — the highest candle quality standard in the AlphaX suite
🛡 Anti-chase extension filter — blocks signals when price has already moved too far from the Vector Line, eliminating chasing entries
📍 Wick-based entry reference — × marker at the signal bar's wick extreme for optimal limit order placement
🔢 RSI(7) micro filter — 7-period RSI gates block overbought longs and oversold shorts at the exact scalp entry bar
📊 Live Efficiency, Choppiness, and ADX metrics on dashboard — the three regime classification inputs displayed with live values and color-coded thresholds
🎨 Flow Vector–colored Vector Line — line color reflects directional conviction in real time from strong bull to neutral to strong bear
📊 17-row live dashboard — Regime, Playbook, Flow Vector, Efficiency, Chop Index, ADX, Vol Delta, HTF Bias, Session, Confluence, and Vector Line price updated every bar
🔔 5 alert conditions — long entry, short entry, chop warning, trend bull regime change, trend bear regime change
⚙ Fully configurable — ER lookback and thresholds, CI length and maximum, ADX length and minimum, KAMA parameters, OBV and delta lengths, flow vector thresholds, all four setup enables, pullback tolerance, anti-chase extension, impulse body minimum, confluence minimum, HTF timeframe and EMAs, volume filter, session, SL/TP parameters, and all colors are independently adjustable
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚙ Settings Reference
Regime Engine
ATR Length — ATR lookback for all ATR-relative calculations (default: 14)
Efficiency Ratio Length — Kaufman ER lookback period (default: 10)
ER Min for Trend Regime — minimum ER to qualify as trend (default: 0.35)
ER Max for Chop Regime — maximum ER that contributes to chop classification (default: 0.22)
Choppiness Index Length — CI calculation lookback (default: 14)
Chop Index — Stand Aside Above — CI threshold above which all signals are suppressed (default: 61.0)
ADX Length — ADX calculation lookback (default: 14)
ADX Min for Trend — minimum ADX for Trend Bull or Trend Bear classification (default: 20.0)
Balance Band Length / Mult — parameters for the balance band Bollinger calculation (defaults: 20 / 2.0)
Flow Vector
Vector Line (KAMA) Length — KAMA lookback period (default: 21)
KAMA Fast / KAMA Slow — KAMA smoothing constants (defaults: 2 / 30)
OBV Slope Length — lookback bars for OBV slope calculation (default: 10)
Volume Delta Length — EMA smoothing for volume delta estimation (default: 14)
Strong Vector Threshold — minimum absolute Flow Vector for strong directional condition (default: 40)
Extreme Vector (range fade) — Flow Vector level triggering the extreme condition for Setup C fades (default: 65)
Entries & Confluence (Scalping)
Setup A · Trend Micro-Pullback — toggle the primary trend scalp setup
Setup B · Micro Impulse Break — toggle the momentum continuation scalp
Setup C · Range Fade (band extreme) — toggle the balance band mean-reversion scalp
Setup D · Vector Shift (legacy) — toggle the flow zero-cross setup (default: off)
Pullback Touch Tolerance (xATR) — ATR tolerance for EMA 8 / Vector Line touch detection (default: 0.22)
Impulse Min Body (xATR) — minimum body size for Setup B impulse and Setup D shift candles (default: 0.55)
Max Extension from Vector (xATR) — maximum allowed distance from Vector Line before anti-chase blocks the signal (default: 1.0)
Micro Swing Lookback — bars for the Setup B micro swing high/low reference (default: 4)
Min Confluence Layers (of 7) — minimum score to fire a signal (default: 4)
Show Entry Signals — toggle signal labels
Show Confluence Label — toggle the live B/S score label near the Vector Line
Signal Cooldown (bars) — minimum bars between consecutive signals (default: 3)
Filters
HTF Trend Filter — toggle higher timeframe EMA alignment requirement
HTF Timeframe — higher timeframe for EMA data (default: 60-minute)
HTF Fast / Slow EMA — EMA periods on the HTF (defaults: 21 / 55)
Volume Confirm — toggle volume expansion requirement
Min Volume vs Avg — minimum volume ratio (default: 1.05)
Volume Avg Length — SMA length for volume baseline (default: 20)
Session Filter — toggle active hours restriction (default: off)
Active Session — configurable session window
Exit Guidance
Show SL / TP Guides — toggle stop and target circle plots
SL Distance (xATR) — ATR buffer added beyond the EMA 8 / Vector Line stop anchor (default: 0.85)
TP Reward (R) — take profit as a multiple of the actual risk (default: 2.0)
Display
Show Vector Line (KAMA) — toggle the adaptive trend reference line
Show Balance Bands — toggle the BB-style balance band plots
Show Regime Change Labels — toggle small regime transition labels on regime-change bars (default: off)
Show Dashboard — toggle the full dashboard
Dashboard Position — Top Left / Top Right / Bottom Left / Bottom Right
Colors
Bull / Bull Bright — yellow-green family for bullish signals and indicators
Bear / Bear Bright — red family for bearish signals
Chop / Caution — orange for chop regime and caution states
Balance / Vector — purple for balance bands, Vector Line neutral state, and equilibrium elements
SL Guide / TP Guide — stop and target circle colors
Dash Text / Dash BG / Dash Header / Dash Section / Dash Frame — full dashboard color control
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔔 Alert Conditions (5 total)
Entry Alerts
Vector Long — scalp long signal fired. Wick rejection entry confirmed with all regime and confluence conditions met
Vector Short — scalp short signal fired
Regime Alerts
Vector Chop Warning — market has entered Chop regime. Stand aside until regime clears
Vector Trend Bull — market has transitioned to Trend Bull regime. Watch Vector Line for Setup A pullback opportunities
Vector Trend Bear — market has transitioned to Trend Bear regime. Watch Vector Line for Setup A short pullback opportunities
All alert messages are formatted as const strings for clean webhook and notification platform integration.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 Recommended Settings by Instrument & Timeframe
The default configuration is optimized for XAUUSD, major forex pairs, and crypto on M1–M5 :
Cooldown at 3 bars — fast timeframes produce setups in rapid succession. A 3-bar cooldown prevents back-to-back signals on consecutive bars while allowing reasonable signal frequency
SL at 0.85× ATR — tight scalp stop anchored to the EMA 8 / Vector Line zone. The strict pin bar requirement ensures the signal bar's wick provides meaningful structural support, so the stop does not need to be large
TP at 2.0R — on M1–M5 with a 0.85× ATR stop, 2.0R produces a tight, achievable target during normal trending conditions
HTF at 60-minute — the standard intraday reference for M1–M5 scalping
Volume at 1.05× average — a very low multiplier appropriate for scalping timeframes where volume spikes are smaller and entry bars do not always show dramatic volume expansion
For other instruments or timeframes, adjust:
M15–H1 intraday — increase ER Length to 14, increase Chop Length to 20, increase CI stand-aside to 62, increase ADX minimum to 22, increase Cooldown to 6, increase TP to 2.5–3.0R
Crypto (BTC, ETH) — increase ATR Length to 20 for smoother ATR on high-volatility instruments, increase ER threshold to 0.40 for trend classification on more volatile assets
Indices (NAS100, US30) — use session filter restricted to market hours, increase ADX minimum to 22, consider enabling Setup D for the sharper zero-cross moves typical of index momentum
Fewer, higher-quality signals — raise Min Confluence to 5–6, increase ER trend minimum to 0.40, reduce CI stand-aside to 58, increase pullback touch tolerance slightly to 0.25 for tighter reference line proximity
Higher signal frequency — lower Min Confluence to 3, enable Setup D, reduce cooldown to 2, disable HTF filter on fast timeframes where the 60-minute EMA can lag too much
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
👥 Who This Is For
⚡ Pure scalpers on M1–M5 — VECTOR is the only indicator in the AlphaX suite specifically designed for sub-5-minute scalping. Every parameter — the pin bar standard, the wick entry reference, the tight ATR stop, the acceleration requirement, the anti-chase filter — is calibrated for fast-timeframe execution
🧭 Regime-aware traders — traders who understand that different market conditions require different strategies will immediately recognize the value of having the regime identified and the playbook selected automatically
🎯 Precision entry traders — the wick-entry reference and the strict pin bar requirements make VECTOR ideal for traders who want precise fill zones rather than market-on-close entries
📊 Traders who study market microstructure — the Efficiency Ratio, Choppiness Index, and KAMA components expose the internal mechanics of market character in ways that standard trend indicators do not
🔴 Traders who are burned by chasing — the anti-extension filter and RSI(7) gate are built specifically to stop the two most common scalping failures: entering too late after the move has already extended, and entering when momentum is actually exhausted
⚠ Traders who overtrade in choppy conditions — the Chop regime is the most powerful feature for discipline. When the dashboard shows ⛔ CHOP — STAND ASIDE, the system enforces what many traders cannot enforce themselves
🏦 Gold and forex scalpers — the default settings are calibrated for XAUUSD and major forex pairs, which exhibit the clearest regime cycling of any liquid instruments due to their session-driven institutional flows
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📝 Notes
All signals are confirmed on bar close — the indicator is non-repainting by design. All regime classification, Flow Vector, setup conditions, and confluence scoring finalize on confirmed bars only
The KAMA Vector Line has a warm-up period equal to the KAMA Length setting. On charts with insufficient bar history, the Vector Line may not display correctly until enough bars accumulate
The Efficiency Ratio and Choppiness Index require their full lookback periods to produce accurate readings. On charts with fewer bars than the longest lookback, readings may be imprecise during the initial warm-up period
The anti-chase extension filter uses the distance from close to the Vector Line. In fast-moving scalp conditions, this filter can sometimes block entries that a discretionary trader would take. Increase the extension maximum if this becomes a frequent issue on your instrument
The signal cooldown of 3 bars is deliberately short for scalping timeframes. On M1 charts, 3 bars = 3 minutes — sufficient to prevent back-to-back duplicate signals while allowing rapid sequential setups in trending conditions
Setup D (Vector Shift) is off by default and is not recommended for M1–M5 scalping. Flow Vector zero-crosses on fast timeframes occur too frequently and with insufficient signal-to-noise ratio to be useful without additional filtering. Consider enabling it only on H1+ timeframes
The balance bands in VECTOR are Bollinger-style ATR-smoothed bands used purely as visual references and Setup C trigger levels. They are not the same as the ANCHOR adaptive bands and do not produce trailing stop functionality
The indicator does not track open positions or P&L and does not connect to any broker or account
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠ Disclaimer
This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Built for scalpers who know that trading the wrong setup in the wrong regime is not a signal problem — it is a system architecture problem. Indicator
Indicator
Indicator
Indicator
Multi-Timeframe Candle Open Tracker (R2F Trading)Multi-Timeframe Candle Open Tracker
A compact table that shows which candles are opening a fresh bar right now and which open on the next bar, across four groups of timeframes at the same time: hourly, daily, weekly, and monthly.
The table sits in the corner of your chart. Each group has a NOW row and a NEXT row. A green cell means a new candle of that timeframe is opening, and a red cell means it is not. If you are trading off the 4H and want to know whether the 8H and 12H are also turning over on the current bar, you can read it from the table instead of flipping between timeframes.
What it covers:
- HOUR: 1H through 12H
- DAY: 1D through 5D
- WEEK: 1W through 4W
- MONTH: 1M through 12M
How the timing works
The readout is calculated from the clock and the calendar rather than from the chart you happen to be on, so the table shows the same thing on a 1-minute chart and on a 6-month chart. Many candle-open tools break when the chart timeframe is higher than the candle being checked, because their data source either collapses every sub-period together or lags a full period behind. This one avoids that by deriving each candle boundary directly from the date.
Multi-period candles are anchored the way PulseWire builds them. Multi-month candles align to the calendar year, so a new 6M candle opens in January and July, quarters break on January, April, July, and October, and a 12M candle opens each January. Weekly multiples align to the ISO week. Daily multiples run as a continuous Monday-to-Friday trading-day count, so a 5D candle matches a trading week while the shorter multiples cycle through without resetting every Monday.
Market closure
For markets that close, such as forex over the weekend, the hour and day rows detect when the daily candle has stopped rolling. While the market is shut, nothing reads as opening now, and the next bar is treated as the reopen, where the hourly candles all reset and open together. The same reset applies at each normal day boundary, so the final hour of the session shows every hourly candle opening next.
Settings
- Table position and text size
- A top-margin control that drops the table below the symbol overlay on mobile, with no effect on your desktop layout
- Show and hide toggles for the hour, day, week, and month sections
- An optional grey divider between sections, with adjustable thickness
- Colour control for the open and closed cells, the section headers, the dividers, and the grid
Notes
The hour and day rows assume a 24-hour daily candle, which fits forex and crypto. The daily multiples 2D, 3D, and 4D are anchored to the start of the year; 1D and 5D are exact, and you can check the in-between multiples against a 3D or 4D chart if your broker anchors them differently. The day row currently treats both Saturday and Sunday as closed, so during the Sunday forex reopen the daily section reads as closed while price is already moving.
Works on any asset and any chart timeframe.
- R2F Trading Indicator
Indicator
Tendencia Diaria - EMA 20 / 50 / 200Armé un indicador simple para PulseWire pensado para leer la tendencia diaria de una forma visual, sin llenar el gráfico de señales invasivas.
La base usa tres medias móviles:
• EMA 20: muestra el movimiento de corto plazo y sirve para detectar recuperación o pérdida de impulso.
• EMA 50: ayuda a identificar la tendencia de mediano plazo.
• EMA 200: funciona como referencia de tendencia estructural o de fondo.
Además de dibujar las medias, el indicador muestra una tabla con el precio actual, el valor de cada EMA y la distancia porcentual del precio respecto de ellas.
La tabla clasifica el contexto en distintos estados:
🟢 Alcista fuerte
El precio está por encima de EMA 20, EMA 50 y EMA 200. Además, las medias están ordenadas de menor a mayor plazo y la EMA 200 acompaña subiendo. Es el escenario más favorable para buscar compras.
🟢 Alcista
El precio se mantiene por encima de EMA 50 y la EMA 50 está arriba de EMA 200. La tendencia general sigue siendo positiva, aunque el corto plazo puede estar corrigiendo.
🟠 Corrección alcista
El activo pierde la EMA 20, pero sigue con una estructura de fondo positiva: continúa arriba de EMA 200 y la EMA 50 sigue por encima de la EMA 200. Puede ser una corrección dentro de una tendencia alcista.
🟠 Debilitamiento
El precio está debajo de EMA 20, EMA 50 y EMA 200, pero la EMA 50 todavía permanece arriba de EMA 200. No es una tendencia bajista de fondo plenamente confirmada, pero sí una señal clara de deterioro.
🔴 Bajista
El precio está debajo de EMA 50 y la EMA 50 ya está por debajo de EMA 200. El contexto general es negativo.
🔴 Bajista fuerte
El precio está debajo de las tres medias, ordenadas de forma bajista, y la EMA 200 no muestra pendiente positiva. Es el escenario más débil.
🟠 Rebote bajista
El precio recupera la EMA 20, pero sigue debajo de EMA 200 y la EMA 50 continúa debajo de la EMA 200. Puede haber rebote, pero la estructura principal sigue siendo bajista.
⚪ Neutral
Las medias están mezcladas o el precio está entre ellas. No hay una tendencia clara y conviene evitar decisiones apuradas.
La señal bull del indicador aparece cuando el precio recupera la EMA 20 dentro de una estructura positiva: el precio debe estar por encima de EMA 50 y la EMA 50 debe estar por encima de EMA 200. La idea no es comprar cualquier cruce, sino buscar una recuperación de impulso dentro de una tendencia que ya acompaña.
Las señales se muestran con triángulos discretos para no ensuciar el gráfico.
Importante: esto no busca predecir el mercado ni reemplaza análisis de volumen, soportes, resistencias, contexto macro o gestión de riesgo. Es una herramienta visual para ordenar la lectura de tendencia.
Indicator
FVG Alert IndicatorFVG Alert Indicator – Confirmed Fair Value Gaps with Auto-Fill Cleanup
This indicator detects and marks Fair Value Gaps (FVGs) — the price imbalance left when a sharp move causes a gap between the high of one candle and the low of a candle two bars later (or vice versa for bearish gaps).
Key features:
Confirmed signals only — Unlike many FVG scripts, this indicator waits for the third candle to fully close before marking a gap as "formed." This eliminates false/early alerts that fire mid-bar before the pattern is actually complete.
Clean visual zones — Each FVG is plotted as a borderless, semi-transparent fill box so the zone is easy to read without cluttering your chart with extra outlines.
Auto-fill removal — Once price trades back through a gap and fills it, the zone is automatically deleted from the chart. Only live, unfilled FVGs remain visible, so you're always looking at gaps that are still relevant.
Minimal markers — Small, clean arrow icons mark exactly where each bullish or bearish FVG formed, without the bulkier triangle shapes used by default.
Built-in alerts — Set alerts for bullish or bearish FVG formation and get notified the moment a gap is confirmed — no more, no less.
How it works:
A bullish FVG forms when the low of the current candle is above the high of the candle two bars back, leaving an unfilled gap below price. A bearish FVG is the mirror case. This script tracks every gap individually, extending the zone bar-by-bar until price returns to fill it, at which point the zone is removed.
Best used for:
Identifying imbalance zones that price is statistically likely to revisit, spotting potential support/resistance from gap fills, and combining with your own trend or structure analysis for entries/exits. Indicator
Indicator
Indicator
Reference ZonesReference Range Zones maps an anchor period's trading range into colored horizontal zones, so you can read at a glance where current price sits relative to the prior session's premium, value, and discount areas.
What it does
It takes the high and low of a chosen anchor timeframe (the previous day by default), divides that range into equal horizontal zones, and draws each zone as a band of dotted lines. The top zones are colored as premium (potential resistance / distribution), the middle zones as value, and the bottom zones as discount (potential support / accumulation). A configurable number of past periods stay on the chart as history.
How it works
On each new anchor period the script captures the just-completed period's high and low, then splits that range into N equal slices. For each slice it renders a band of evenly spaced lines, where the "fill %" input controls how much of the slice height the band occupies — lower values leave visible gaps between bands. Zone color is assigned by position: a settable number of top slices use the premium color, a settable number of bottom slices use the discount color, and everything between uses the value color. Optional price labels mark each zone boundary at the right edge. Completed periods are frozen in place and the oldest are pruned once the kept-history limit is reached. A built-in line budget automatically reduces how many history periods are drawn if your zone and density settings would exceed the platform's drawing limit, so the script stays within limits without manual tuning.
How to use it
Treat the discount band as an area where longs are at a relative range low and the premium band as an area where shorts are at a relative range high; the value band in the middle is where price is closer to equilibrium. The zones are reference context, not signals — combine them with your own structure, trend, or volume read. Use "Previous period" mode for fixed levels you can plan around at the open, or "Current (developing)" mode to watch zones expand with the live session.
Inputs
Anchor timeframe and range source (previous vs developing); number of history periods to keep; number of zones, and how many top/bottom zones are premium/discount; line style, width, density, and band fill %; right-edge projection toggle; edge price labels; and full color and transparency control.
Notes
No zones appear until at least one anchor period has completed (in "Previous period" mode). This is a visual range-context tool and makes no claim about future price direction or performance. Indicator
NY RTH Opening Range [M1D]NY RTH Opening Range
This indicator marks the New York Regular Trading Hours Opening Range (09:30–10:00 New York time, DST-adjusted automatically) on any chart timeframe at or below 30 minutes.
How it works: the script accumulates the highest high and lowest low across every bar that falls inside the 09:30–10:00 New York session window, rather than assuming a single candle equals the range — this makes it accurate whether you're viewing a 1-minute or 30-minute chart.
Once the window closes, the range locks and three levels are drawn: the range high, the range low, and the midpoint (equilibrium). The current day's range plus a user-defined number of prior days are displayed for reference, with prior days dimmed automatically.
After the range locks, the script monitors price for a confirmed bar close beyond the range high or low and marks a single directional signal per side per day. If price later closes back inside the range following a break, a separate marker flags that the break may have failed, prompting reassessment rather than continued directional bias.
A status panel in the corner of the chart shows whether the range is still forming or has locked, the current high/low values, and the live directional bias.
Settings: session window and timezone, line extension length, number of prior days shown, line/marker colours, and panel visibility are all user-adjustable via the indicator's settings menu.
Note: This tool identifies a structural reference level and does not constitute financial advice or a standalone trading signal. As with any single concept, it is intended to be used as one component of a broader trading framework and should be combined with proper risk management. Indicator
Indicator
Indicator
Mez Clean Trade Replay Gold ScalperMez Clean Trade Replay Gold Scalper is a professional XAUUSD scalping assistant designed to identify high-probability BUY and SELL opportunities using multi-factor confirmation. The strategy combines higher-timeframe trend analysis, DXY correlation, liquidity sweeps, Fibonacci value zones, momentum, and dynamic risk management to produce clean, disciplined trade setups. It includes TP1, TP2, TP3 and stop-loss management, along with a live trade dashboard and historical trade replay, making it ideal for both live execution and strategy review.
Indicator
Indicator
Indicator
Indicator
Indicator
