ARB RSI Short Strategy [3Commas]ARB RSI Short Strategy
🔷 What it does:
A short-only, momentum-fade DCA system for Arbitrum on the 4-hour chart. The deal opens only when the 4h RSI(14) crosses back DOWN through 74 — a clean overbought rollover, which on a higher timeframe is a rare, selective event. Two averaging orders then stack ABOVE the base entry (+5% and +10% adverse) with sizes scaled 1.7× per rung, so a continued push higher improves the average. The position closes on a fixed 6% Take Profit from the average. There is no Stop Loss — risk is structurally capped by the bounded 2-rung ladder.
- Single base short plus two averaging orders at +5% / +10% above entry.
- Order sizes scaled 1.7×: base 500 → AO1 850 → AO2 1,445.
- Fixed 6% Take Profit from the running average entry. No trailing.
- No Stop Loss: maximum position is bounded by the 2-AO ladder (no adds beyond AO2).
- Every base fill, averaging order, and exit emits a webhook-ready JSON payload for a DCA Bot.
🔷 Who is it for:
- Swing traders who fade higher-timeframe overbought conditions on ARB.
- DCA-style traders comfortable with rare, selective entries (a 4h RSI rollover fires only a handful of times per year).
- Bot operators driving a DCA Bot from PulseWire alerts with per-event JSON payloads.
- Traders who accept a bounded martingale-style ladder in exchange for a high deal-close rate, with no hard stop.
🔷 How does it work:
Entry Trigger: A 4-hour RSI(14) is sampled via request.security with lookahead disabled (no repaint). The short opens when that RSI was ≥ 74 on the prior 4h close and drops below it on the current close — the overbought-to-neutral rollover.
Base Order: 500 USDT default (5% of 10k capital), placed Limit at the signal bar's close (a Market toggle is available).
Averaging Ladder: Two safety orders sit at fixed +5% and +10% above the base. Sizes scale by 1.7× from an 850 USDT first AO (850, then 1,445). Each fill raises the average entry, shrinking the move-down needed to hit the target.
Exit: A fixed 6% Take Profit below the running average entry. When close reaches it, the position closes at market. No trailing.
No Stop Loss: There is no exit on adverse moves above the top of the ladder. Per-trade risk is structurally capped by the bounded position — base + 2 AOs = ~$2,795 max deployed (~27.95% of equity). If a hard exchange-side stop is required, layer it on the bot.
🔷 Why it's unique:
- Higher-Timeframe Rollover: Firing on a 4h RSI cross-down through 74 is far more selective than an intraday trigger — it waits for a meaningful overbought turn, so capital is committed rarely and at stretched conditions.
- Bounded Averaging, No Stop: A compact 2-rung 1.7× ladder caps the maximum position in advance, which is the structural risk control in place of a stop.
- Fixed Recovery Target: The 6% Take Profit on the averaged-down entry releases the deal on a clean, defined bounce.
- Plug-and-Play Webhooks: Base, each AO, and the exit each emit a complete JSON alert; one "Any alert() function call" alert drives a DCA Bot end-to-end.
🔷 Considerations Before Using the Strategy:
Sample Size (Important): Over a ~3.25-year backtest the strategy produced only 10 closed trades — far below the ~100-trade floor for statistical relevance. The 80% win rate and the high profit factor are a direct consequence of this tiny, selective sample and must NOT be extrapolated as a forward edge. Treat the numbers as a demonstration of the entry's discipline only; validate across more assets and conditions before committing capital, and expect a very low trade frequency.
No Stop Loss / Tail Risk: With no stop, a sustained rally above the +10% top rung leaves the full position open and unhedged until price reverts to the 6% target — the single largest risk here. The bounded ladder caps how much is deployed (~28% of equity), not how far price can run against the unhedged remainder.
Market & Timeframe: Calibrated for ARBUSDT.P on 4h. RSI level (74), AO deviations, and sizing should be reviewed before redeploying on another asset.
Capital Deployment: Maximum deployed is ~$2,795 (~27.95% of default 10k equity) — above the conventional 5–10% per-trade band. Scale the base/AO inputs down to dial exposure into a safer range.
Commission Calibration: Default commission is 0.06% (Bybit perpetual taker). Match it to your venue's real fees.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a 10-trade sample.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:ARBUSDT.P (Perpetual) — portable to any ARB / USDT pair.
Timeframe: 4H
Test Period: March 23, 2023 — June 21, 2026 (~3.25 years).
Initial Capital: 10,000 USDT.
Order Size: 500 USDT base (5%) + 2 averaging orders (850, 1,445) scaled 1.7×.
Max Capital Deployed: ~2,795 USDT per trade (~27.95% of equity).
Commission: 0.06% per trade.
Slippage: 3 ticks.
Margin for Short Positions: 100%.
Indicator Settings: Default Configuration.
Base Order: 500 USDT, Limit by default (Market toggle available).
Entry Trigger: 4h RSI(14) Crossing Down 74.
Averaging Orders: 2 at fixed +5% / +10% above base entry; sizes 850 / 1,445 (1.7× progression).
Take Profit: 6.0% below average entry (no trailing).
Stop Loss: None — bounded position ladder is the structural risk cap.
Strategy: Short Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance. This is a very small (10-trade) sample — see the Sample Size note above.
Net Profit: +530.08 USDT (+5.30%)
Max Equity Drawdown: 448.19 USDT (4.48%)
Total Closed Trades: 10
Percent Profitable: 80.00% (8 / 10)
Profit Factor: 16.189
🔷 How to Use It:
🔸 Adjust Settings: Review the Base Order Size, the AO deviations/sizes, the RSI trigger level, and the Take Profit. Defaults are calibrated for ARB 4h — recalibrate per asset.
🔸 Results Review: This configuration produced only 10 closed trades over ~3.25 years — far too few to be statistically meaningful. Treat the metrics as indicative of the entry's selectivity, not a forward guarantee; broaden testing across assets and consider whether the low trade frequency fits your goals before deploying.
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs. The strategy emits JSON for entry, each averaging order, and exit.
🔷 INDICATOR SETTINGS
Base Order Size (USDT): USDT amount opened on the initial short.
Use LIMIT for Base: Toggle between Limit (default) and Market entry.
Averaging Orders per Trade: Number of safety orders (default 2).
First AO Size (USDT): Size of the first averaging order; subsequent AOs scale by the Order Size Multiplier.
Deviation to First AO (%) / Deviation Step Multiplier: Spacing of the AO ladder above base entry. Defaults to +5% then +10%.
Order Size Multiplier: Per-rung size scaling (default 1.7).
RSI Timeframe / Length / Crossing Down Level: The 4h RSI(14) crossing-down trigger for the base short.
Take Profit (%): Fixed distance below average entry where the short closes for profit.
DCA Bot Webhook: Bot ID, Email Token, and Pair fields injected into every alert payload.
Visualization: Toggle AO Ladder, Avg / TP plot lines, fill labels, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
Indicator
Indicator
Indicator
Infinity Signal MA Cross ForecastInfinity Signal MA Cross Forecast is an advanced moving average forecasting and signal confirmation tool built around the relationship between a moving average and its previous value, MA versus MA .
The indicator combines real-time MA cross detection, confirmation signals, forward projection modeling, projected crossover forecasting, and adaptive projection inversion into a single chart overlay.
Core Features
• Adjustable Moving Average Length
• MA and MA Cross Detection
• Raw Buy and Sell Cross Markers
• Buy and Sell Confirmation Signals
• Forward Projection Engine
• Potential Buy and Potential Sell Forecast Balloons
• Projected Cross Vertical Markers
• Auto-Flip Projection Technology
• Manual Projection Flip Option
• Ghost Projection Comparison Mode
• Alignment Status Table
• Projection Direction Reporting
• Customizable Colors and Signal Sizes
• PulseWire Alert Support
How the Projection Works
The projection engine clones a historical MA pattern and shifts it forward into the future. The projected MA and projected MA are then analyzed for future crossover opportunities.
Potential Buy and Potential Sell balloons appear at projected crossover locations, allowing traders to visualize possible future signal timing before a cross occurs.
Auto-Flip Projection
One of the unique features of this script is Auto-Flip Projection.
When the projected historical pattern disagrees with the current MA direction, the indicator can automatically invert the projection to better align with current market behavior.
Users may also manually flip the projection and compare the flipped version against the original projection using Ghost Projection mode.
Recommended Projection Settings
The projection engine is designed around a one-hundred-twenty-two-day market cycle.
For best results, use the following Pattern Start Bars Back settings:
Timeframe Pattern Start Bars Back
1 Hour 2,928
2 Hour 1,464
4 Hour 732
6 Hour 488
8 Hour 366
12 Hour 244
1 Day 122
Pattern End Bars Back is typically set approximately twenty bars less than Pattern Start Bars Back, although users are encouraged to experiment with alternative settings.
Notes
This script is designed as a forecasting and market structure visualization tool. Projected signals are estimates derived from historical MA behavior and should not be interpreted as guarantees of future market direction.
Always perform your own analysis and risk management before making trading decisions. Indicator
Indicator
Indicator
Indicator
Indicator
Session Percentile Oscillator + OI Context# Session Percentile Oscillator with OI Context
The Session Percentile Oscillator measures how much the current trading session has expanded relative to historical sessions of the same type (Asia, London, New York AM, Lunch, and New York PM).
Instead of looking at raw volatility, the indicator normalizes each session's range by ATR and compares it against historical observations. The result is a percentile score between 0 and 100.
A reading of:
* 20 means the current session is larger than only 20% of comparable historical sessions.
* 80 means the current session is larger than 80% of comparable historical sessions.
* 95 means the current session is larger than 95% of comparable historical sessions.
The goal is not to predict direction, but to measure how much effort is entering the market.
## OI Context Engine
The percentile line and velocity histogram are colored using aggregated Open Interest data collected from multiple derivatives exchanges.
The indicator combines:
* Aggregated Open Interest
* Volume Delta (CVD)
* OBV
* Price direction
to classify activity into:
* Green = Long building
* Red = Short building
* Aqua = Short covering
* Blue = Aggressive short squeeze
* Orange = Long liquidation
Unlike traditional OI indicators, mixed conditions are resolved using a probability engine and price/OI fallback logic, which prevents neutral gray states and keeps market positioning easier to read.
## Percentile Velocity Histogram
The histogram below the oscillator represents percentile velocity.
It measures how quickly the session percentile is changing.
* Positive values indicate expanding effort.
* Negative values indicate fading effort.
This is often useful for spotting acceleration before price fully reacts.
## ⚡ Effort Expansion
One of the key features of the indicator is the Effort Expansion warning.
The signal appears when the percentile slope is rising unusually fast compared to its own historical behavior.
Rather than using a fixed threshold, the indicator compares the current percentile slope against a rolling history and identifies situations where effort is expanding faster than normal.
The signal does not predict bullish or bearish direction.
It simply warns that market effort is increasing aggressively and that traders should pay closer attention to price structure, support/resistance, and OI context.
## D — Effort Divergence
The indicator can display effort divergences.
Bearish Divergence (D):
* Price makes a higher high.
* Percentile effort fails to make a higher high.
Bullish Divergence (D):
* Price makes a lower low.
* Percentile effort fails to make a lower low.
These signals can help identify weakening participation behind price extremes.
## E — Exhaustion / Absorption
The optional E marker appears when:
* Percentile effort remains elevated.
* Price produces little result.
This condition can indicate absorption, exhaustion, or inefficient effort where substantial market activity is producing limited directional progress.
## How To Use
The oscillator is best used as a market participation and effort tool.
Typical workflow:
1. Identify whether effort is expanding or contracting.
2. Use OI colors to understand who is likely driving the move.
3. Watch for ⚡ Effort Expansion events.
4. Use D and E markers to identify divergence or exhaustion.
5. Use price action and market structure to determine direction.
The indicator is designed to answer a different question than traditional oscillators:
"How much effort is entering the market relative to what is normally observed during this session?"
Indicator
XMR RSI Short Indicator [3Commas]XMR RSI Short Indicator
🔷 What it does:
This is the signal-only companion to the XMR RSI Short strategy — it fires alerts without running a backtest engine. It tracks one virtual short at a time, opened when the 5-minute RSI(9) crosses back DOWN through 80 (an overbought rollover). Up to three averaging orders stack at +1%, +2%, and +3% above entry (equal size). The deal closes on a 1.3% Take Profit from the average with a 0.3% trailing lock, or a hard 8% Stop Loss. Running average entry, deployed capital, open PnL, and lifetime realized PnL are all kept from honest fill-by-fill bookkeeping. Every event emits a webhook-ready JSON payload for a DCA Bot.
- Entry on the RSI rollover: 5m RSI(9) crossing DOWN through 80.
- Uniform averaging ladder above entry: +1% / +2% / +3%.
- 1.3% Take Profit with a 0.3% trailing lock, plus a hard 8% Stop Loss.
- Live Open PnL and lifetime Total PnL on the chart.
🔷 Who is it for:
- Intraday traders fading blow-off spikes on XMR on lower timeframes.
- Bot operators wiring PulseWire alerts straight into a DCA Bot via per-event JSON.
- Traders who want a defined-risk short signal — averaging with a stop, not a stopless martingale.
- Operators who want to watch the virtual deal state (entry, fills, exit) directly on the chart.
🔷 How does it work:
Entry Trigger: A 5-minute RSI(9) is pulled with request.security and lookahead disabled (no repaint). The short fires when that RSI was ≥ 80 on the prior 5m close and drops below it on the current close.
Base Entry: On the trigger, the indicator marks a virtual short, records the entry, and seeds the cost-basis ledger with the base order size (default 500 USDT).
Averaging Ladder (uniform): Three safety orders at fixed +1% / +2% / +3% above base, 250 USDT each. Each fill updates the running cost-basis and dispatches its own webhook, raising the virtual average entry.
Honest Bookkeeping: Cost and quantity update on every event, so the average entry, deployed capital, Open PnL, and Total PnL in the status table reflect the true broker-equivalent state.
Exit (TP + Trailing): At 1.3% below the running average, a trailing exit arms; the indicator tracks the in-favor low and signals a close on a 0.3% retrace off it.
Stop Loss: A hard 8% stop above the average fires the close webhook, banks realized PnL, and resets the virtual position.
Lifetime Total PnL: Each closed cycle's realized PnL accumulates into a lifetime counter shown alongside the current-cycle Open PnL.
🔷 Why it's unique:
- Rollover, Not Just Overbought: Firing on the RSI cross-down through 80 skips trades that ignite while momentum is still rising — it waits for the turn.
- Stop-Bounded Averaging: A compact 3-rung ladder plus an explicit 8% stop keeps the worst-case loss known up front.
- Trailing Profit Lock: The 1.3% target arms a 0.3% trail, banking the snap-back while letting an extended drop run.
- Lifetime PnL Tracking: Open and lifetime Total PnL on the chart give strategy-tester-equivalent insight without a backtest.
- Plug-and-Play Webhooks: Base, each AO, and the exit each emit a complete JSON alert; one "Any alert() function call" alert drives a DCA Bot end-to-end.
🔷 Considerations Before Using the Indicator:
Sample Size: The companion strategy's backtest produced 238 closed trades — well above the ~100-trade floor commonly used for statistical relevance. Still a single test window, so treat the metrics as indicative.
Short Execution Venue: This signals shorts. Live shorting of XMR requires a margin or perpetual venue — it cannot run on a spot account.
Lower-Timeframe Sensitivity: The trigger runs on a 5-minute RSI. Fast timeframes mean more signals and more fee/slippage drag — confirm both fit your venue.
Stop Loss Discipline: The 8% stop is the core risk control. Base plus three AOs deploy at most ~1,250 USDT (12.5% of the default reference equity); an 8% stop on that caps the worst case near ~1% of equity. Keep the stop on.
Trend Risk: Fading strength suits ranges and choppy tape. In a relentless uptrend the short can be stopped out repeatedly; the rollover trigger reduces, but does not remove, that risk.
Cross Detection Granularity: Entries, AO fills, and exits evaluate on bar close. A spike-and-revert within a single bar may be missed by design — matching realistic polling and avoiding intra-bar over-signaling.
Live vs Historical State: The virtual state is rebuilt from chart history on each recompile. If added mid-deployment or if the live bot diverges (manual interventions, partial fills), states may differ. Toggle the indicator off and on to reset.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester — but the live Total PnL counter gives a running approximation. For full metrics over a ~4.8-month sample (238 closed trades, 85.71% win rate, 1.79% max drawdown, profit factor 2.013, +5.59% net return), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a 5m XMR / USDT chart.
🔸 Review the RSI trigger level, the averaging-order count/deviation/size, the Take Profit, Trailing, and Stop Loss percentages. Defaults mirror the source DCA Bot configuration.
🔸 Set Base Order Size and AO sizes to match your bot's configuration (the avg-entry display becomes meaningful when virtual sizing matches real sizing).
🔸 In the DCA Bot Webhook group, paste the Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_XMR).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. The indicator emits JSON for entry, each averaging order, and the TP/SL exit.
🔷 INDICATOR SETTINGS
Base Order Size (USDT): Virtual order size for the avg-entry / open-PnL computation.
Averaging Orders per Trade: Number of safety orders (default 3).
First AO Size (USDT): Virtual size of each averaging order (uniform by default).
Deviation to First AO (%) / Deviation Step Multiplier: Spacing of the AO ladder above base entry. Defaults to uniform +1% steps.
Order Size Multiplier: Per-rung size scaling (1.0 = uniform).
RSI Timeframe / Length / Crossing Down Level: The RSI(9) crossing-down trigger (default 5m).
Take Profit (%) / Trailing (%): TP distance below average entry and the trailing retrace that closes the position.
Stop Loss (%): Hard stop above average entry.
Active Window: Optional date filter — when ON, the indicator only fires signals between From and To dates.
DCA Bot Webhook: Bot ID, Email Token, and Pair fields injected into every alert payload.
Visualization: Toggle DCA Ladder, Avg / TP / SL plot lines, fill labels, signal triangles, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
XMR RSI Short Strategy [3Commas]XMR RSI Short Strategy
🔷 What it does:
A short-only, momentum-fade DCA system for Monero. The deal arms the moment a fast push higher exhausts itself: the 5-minute RSI(9) must cross back DOWN through the 80 line. From that base short, up to three averaging orders stack at +1%, +2%, and +3% above entry (equal size), so a continued push higher simply improves the average. The position is then released on a 1.3% Take Profit from the average with a 0.3% trailing lock, while a hard 8% Stop Loss defines the worst case in advance.
- One base short plus a 3-rung uniform averaging ladder placed above entry.
- Entry only on the RSI rollover (cross down through 80) — not on a static overbought reading.
- Take Profit at −1.3% from average with a 0.3% trailing retrace to extend winners.
- Hard 8% Stop Loss — a real, bounded per-trade risk rather than an open-ended martingale.
- Every base fill, averaging order, and exit emits a webhook-ready JSON payload for a DCA Bot.
🔷 Who is it for:
- Intraday traders who like to fade blow-off spikes on XMR on lower timeframes.
- Bot operators wiring PulseWire alerts straight into a DCA Bot via per-event JSON.
- Traders who want averaging with a stop attached, not a stopless grind.
- Portfolio builders adding a high-win-rate short-side sleeve with capped risk.
🔷 How does it work:
Entry Trigger: A 5-minute RSI(9) is pulled with request.security and lookahead disabled (no repaint). The short fires when that RSI was ≥ 80 on the prior 5m close and drops below it on the current close — the overbought-to-neutral rollover.
Base Order: 500 USDT default (5% of 10k capital), placed Limit at the signal bar's close (a Market toggle is available).
Averaging Ladder (uniform): Three safety orders sit at fixed +1% / +2% / +3% above the base, each 250 USDT (half the base). They average the short up if price keeps climbing, shrinking the bounce needed to reach target.
Exit (TP + Trailing): Once price reaches 1.3% below the running average, a trailing exit arms; the strategy then tracks the in-favor low and closes on a 0.3% retrace off it.
Stop Loss: A hard 8% stop above the average closes the deal at market if the short keeps running against the position.
🔷 Why it's unique:
- Rollover, Not Just Overbought: Firing on the RSI cross-down through 80 skips trades that ignite while momentum is still rising — it waits for the turn.
- Stop-Bounded Averaging: A compact 3-rung ladder plus an explicit 8% stop keeps the worst-case loss known up front, unlike classic stopless martingale shorts.
- Trailing Profit Lock: The 1.3% target arms a 0.3% trail, banking the snap-back while still letting an extended drop run.
- Plug-and-Play Webhooks: Base, each AO, and the exit each emit a complete JSON alert; one "Any alert() function call" alert drives a DCA Bot end-to-end.
🔷 Considerations Before Using the Strategy:
Sample Size: The backtest produced 238 closed trades — well above the ~100-trade floor commonly used for statistical relevance. The 85.71% win rate and 2.013 profit factor still reflect a single test window, so treat them as indicative and broaden the test (longer period or more assets) before sizing up.
Lower-Timeframe Sensitivity: Tested on 5m with a 5m RSI trigger. Fast timeframes mean more signals and more fee/slippage drag — verify both fit your venue.
Stop Loss Discipline: The 8% stop is the core risk control. Base + three AOs deploy at most ~1,250 USDT (12.5% of equity); an 8% stop on that caps the worst case near ~1% of equity. Keep the stop on — without it this becomes an unbounded short.
Trend Risk: Fading strength suits ranges and choppy tape. In a relentless uptrend the short can be stopped out repeatedly; the rollover trigger reduces, but does not remove, that risk.
Commission Calibration: Default commission is 0.06% (Bybit perpetual taker). Align it with your venue's real fees — on a high-frequency short this materially moves the result.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:XMRUSDT.P (Perpetual) — portable to any XMR / USDT pair.
Timeframe: 5M chart (5M RSI trigger).
Test Period: January 26, 2026 — June 20, 2026 (~4.8 months).
Initial Capital: 10,000 USDT.
Order Size: 500 USDT base (5%) + 3 averaging orders of 250 USDT each (uniform).
Max Capital Deployed: ~1,250 USDT per trade (~12.5% of equity).
Commission: 0.06% per trade.
Slippage: 3 ticks.
Margin for Short Positions: 100% (1× leverage, Isolated in source config).
Indicator Settings: Default Configuration.
Base Order: 500 USDT, Limit by default (Market toggle available).
Entry Trigger: 5m RSI(9) Crossing Down 80.
Averaging Orders: 3 with fixed deviations +1% / +2% / +3% above base entry; uniform 250 USDT sizing.
Take Profit: 1.3% below average entry, with 0.3% trailing.
Stop Loss: 8% above average entry (hard close).
Strategy: Short Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +559.02 USDT (+5.59%)
Max Equity Drawdown: 188.33 USDT (1.79%)
Total Closed Trades: 238
Percent Profitable: 85.71% (204 / 238)
Profit Factor: 2.013
🔷 How to Use It:
🔸 Adjust Settings: Review the Base Order Size, the AO count/deviation/size, the RSI trigger level, the Take Profit/Trailing, and the Stop Loss. Defaults mirror the source DCA Bot configuration — recalibrate per asset and timeframe.
🔸 Results Review: Run a full-period backtest, confirm the closed-trade count is statistically meaningful, and check that drawdown and trade frequency fit your tolerance before going live.
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs. The strategy emits JSON for entry, each averaging order, and exit.
🔷 INDICATOR SETTINGS
Base Order Size (USDT): USDT amount opened on the initial short.
Use LIMIT for Base: Toggle between Limit (default) and Market entry.
Averaging Orders per Trade: Number of safety orders (default 3).
First AO Size (USDT): Size of each averaging order (uniform by default).
Deviation to First AO (%) / Deviation Step Multiplier: Spacing of the AO ladder above base entry. Defaults to uniform +1% steps.
Order Size Multiplier: Per-rung size scaling (1.0 = uniform).
RSI Timeframe / Length / Crossing Down Level: The 5m RSI(9) crossing-down trigger for the base short.
Take Profit (%) / Trailing (%): TP distance below average entry and the trailing retrace that closes the position.
Stop Loss (%): Hard stop above average entry.
DCA Bot Webhook: Bot ID, Email Token, and Pair fields injected into every alert payload.
Visualization: Toggle DCA Ladder, Avg / TP / SL plot lines, fill labels, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
Indicator
Indicator
Indicator
Multi-TimeFrame Multi-Indicator Dashboard🚀 Multi-Timeframe Multi-Indicator Market Structure Dashboard
🟢 Overview
The **Multi-Timeframe Multi-Indicator Dashboard** is an all-in-one market scanner designed to give traders an immediate, high-level view of an asset's trend across multiple layers of time. Instead of constantly flipping between charts or cluttering your workspace with dozens of indicators, this script compiles key moving averages, momentum oscillators, and volatility indicators into a single, highly readable table directly on your primary workspace.
This tool is optimized for **Equities, Forex, Crypto, Indices, and Commodities traders** who rely on multi-timeframe confluence to confirm high-probability trade setups and eliminate analysis paralysis.
---
🛠️ Key Features
**Multi-Timeframe Confluence Matrix:** Instantly track market structure across 6 default timeframes: **5M, 15M, 1H, Daily, Weekly, and Monthly**.
**8 Integrated Technical Metrics:**
**Trend Identification:** SMA 9, SMA 20, SMA 50, SMA 100, and SMA 200.
**Momentum & Volatility:** Relative Strength Index (RSI 50-line crossover), MACD Histogram (bullish/bearish momentum shifts), and SuperTrend.
**Fully Customizable Layout:** Toggle specific timeframes or indicators on/off via the user inputs menu to perfectly match your trading style. You can also change the table position (e.g., top-right, bottom-left) and text size.
**Smart Alert Engine:** Configure the script to send real-time alerts the exact moment an indicator shifts states (Bullish $\leftrightarrow$ Bearish) on your primary timeframes.
---
🎛️ Settings & Customization
1. **Dashboard Display:** Control the visibility, positioning anchor (top-right, bottom-right, top-left, bottom-left, middle-right, middle-left), and text scaling of the canvas table.
2. **Timeframes to Display:** Toggle individual columns to focus strictly on scalping or macro swing horizons.
3. **Indicators to Display:** Strip out unnecessary lines to match your personal strategy components.
4. **SuperTrend Settings:** Manually adjust the ATR Length and Multiplier inputs for tighter or wider trend bands.
---
📝 Disclaimer
This indicator is built purely for analytical visualization and informational purposes. It does not constitute financial advice. Always practice strict risk management and combine dashboard confirmation with your own broader trading plan. Indicator
Indicator
Turtle Soup Strategy with 1-Bar ConfirmationCatching Institutional Traps:
The Turtle Soup 1-Bar Confirmation MechanicsIn high-frequency and algorithmic trading environments, traditional breakout strategies frequently fall victim to institutional stop-hunts. When price breaks past an established 20-bar extreme, retail momentum systems are triggered to buy or sell the expansion. Concurrently, institutional market makers utilize these concentrated liquidity pockets to fill large counter-positions, resulting in sharp rejections known as "fakeouts".This publication presents the core structural mechanics of a refined Turtle Soup Reversal Model with Strict 1-Bar Confirmation. Rather than attempting to trend-follow highly volatile breakout expansions, this system introduces an automated state-machine architecture engineered to locate, track, and execute trades alongside institutional order absorption.
💎 Key Architectural & Analytical PillarsTo maintain strict execution data discipline on lower timeframes, the script is structured around three proprietary processing frameworks:
1. Zero-Lag Pure Price Action CoreUnlike classic reversal oscillators (RSI, Stochastic, or MACD) that require compounding mathematical averages—which naturally introduces execution lag—this logic operates exclusively on raw spatial thresholds. By plotting step-line boundaries from static historical peaks and troughs, the exact tick distance of structural sweeps can be monitored without lagging indicators distorting the entries. =================================== (20-Bar Historical High)
▲ (The Sweep Wick: Price pierces high)
│
▼ (The Trap Snap: Next candle closes below low)
----------------------------------- (Setup Invalidation Floor)
2. The Multi-Phase State Isolation Engine To completely eliminate signal stacking and duplicate arrow cluster errors during highly volatile flushes, the logic utilizes a sequential State Machine Processor. State 0 (Ready / Flat): The script searches the chart data for a valid historical boundary breach. State 1 / -1 (Trap Active Zone): The moment a candle's wick runs outside the channel lines, the engine halts further search processing. It locks onto that specific bar index, saves its high/low coordinates as unique reference vectors, and opens a strict conditional confirmation window.
3. Strict 1-Bar Confirmation ValidationThe definitive edge of this strategy lies in its restricted window constraint: bar_index == setupBarIndex + 1.If a market-maker stop-hunt is legitimate, the price must immediately fail and reverse back inside the range on the very next candle. If the market continues to expand aggressively against the level for 2 or more bars, the state machine automatically self-resets to 0, clearing all variables. This mathematical restriction prevents the script from attempting to "catch a falling knife" during real macro trend expansions. Indicator
MACD RSI Perfect Hell [XWiseTrade]MACD RSI Perfect Hell
Every trading course teaches the same "perfect" long setup: MACD crosses up, volume rises, RSI lifts off oversold, and price starts climbing — all at once. The textbook calls this confirmation heaven and tells you to buy. This indicator marks exactly those moments — and warns you instead of cheering them.
Why it exists
The cleaner the textbook setup looks, the more dangerous it often is. When MACD, RSI, volume, and price all agree at the same instant, everyone watching those same standard indicators sees the same thing at the same time. The crowd piles in together. But a rally needs someone still left to buy — and at the textbook-perfect moment, most of them already have. That exhaustion is why "perfect" entries so often mark the spot where a move runs out of fuel. Perfect Heaven tends to be Perfect Hell. This tool is built to make those crowded moments visible, so you pause instead of chasing.
How it works
A warning label is plotted only when all four classic conditions line up on the same bar — not one or two, all four:
MACD line crosses its signal line (up for a bullish setup, down for bearish).
Volume is rising — above its average and higher than the previous bar — so the move has participation behind it.
RSI is just leaving an extreme — climbing out of oversold for a bull setup, dropping out of overbought for a bear setup.
Price has already started moving in that direction over a short lookback.
Requiring all four at once is deliberate. Any one or two of these fire constantly and mean little. Demanding the full "perfect" stack means the indicator stays silent almost all the time, and only speaks up at the rare moments when the setup is textbook-complete — which is exactly when the crowd is most committed and a reversal is most worth watching for.
How to use it
Add it to any chart and timeframe. When a "⚠️ Perfect Hell" label appears above a bar, a textbook-perfect bullish setup has just formed; below a bar, a bearish one. Treat it as a caution flag, not a trigger: it's telling you the easy, obvious trade is now crowded. Use it to tighten risk, wait for a better location, or simply stay aware that the move may be closer to its end than its beginning. Alerts are available for both directions. A cooldown keeps labels from clustering.
What makes it different
Almost every MACD/RSI tool is built to find confirmation and push you into the trade. This one is built on the opposite idea: that flawless confirmation is itself a warning. It uses the same well-known indicators most traders rely on, but reads their perfect alignment as a contrarian signal of crowding and exhaustion rather than a green light. That inversion — same inputs, opposite conclusion — is the whole point.
Inputs: MACD fast/slow/signal, RSI length and overbought/oversold levels, volume average length, price-move lookback, signal cooldown.
These are descriptive, contrarian caution signals for discretionary use. They are not buy/sell recommendations. Indicator
Indicator
Strat Market Scanner Pro v6Scan multiple stocks in real time for high-probability Strat setups including 2-1-2, 3-1-2, 2-2, 1-2, 1-3, 3-2, 2-1-1, and 3-2-1 patterns. The scanner automatically calculates entry, stop loss, target levels, higher timeframe continuity (1H, 4H, Daily, Weekly), and grades each setup from A+ to C based on alignment and volume confirmation.
Features:
• Multi-symbol Strat pattern scanner
• Real-time setup detection
• Entry, stop, and target calculations
• HTF continuity scoring (up to 4/4)
• A+, A, B, and C setup grading
• Volume confirmation filter
• Dynamic alert notifications
• Clean scanner table for rapid trade identification
Designed for traders who use The Strat methodology and want to quickly identify actionable setups across multiple tickers without manually reviewing every chart. Indicator
Gann Impulse Time StructuresThis is a very insightful observation based on W.D. Gann's teachings! The concept of viewing market structures through time divisions rather than just price volatility opens up a mathematical dimension to market rhythm.
What the Script Does:
1.Swing Identification: It uses standard ta.pivothigh and ta.pivotlow functions to construct a zigzag that identifies the fundamental swings (impulses and retracements).
2.Time Duration Labels: Instead of focusing on the price movement, it automatically calculates the temporal duration of each swing (in bars) and places the number directly in the middle of the drawn impulse line.
3.Color Coding: Upward swings are marked green, and downward swings are red, making it easier to see the structure of a multi-swing cycle.
How to use it to analyze your theory:
Gann mentioned observing the initial impulse in terms of 2 parts (like an up-swing and a down-swing). With this script, look closely at pairs of swings to observe if the combined unit adds up to an important Gann number (like 36, 72, or 144 bars).
You can change the Pivot Length in the settings. For shorter rhythmic cycles (like the 12-12 or 9-9-9-9 mentioned in your images), you'll want a shorter pivot length. For macroscopic market cycles (like 144 units), you might want to increase the pivot length.
Label Placement: The labels are now placed directly at the pivot points (above the highs and below the lows) instead of the middle of the line.
Text Size: Increased the label size to size.large.
Peak-to-Peak & Trough-to-Trough: Added tracking for the last peak and last trough. The labels now display the current swing duration, followed by the peak-to-peak (P-P) distance above highs, and the trough-to-trough (T-T) distance below lows.
1.Cycle Projections: Whenever a new pair of swings completes (creating a new Peak-to-Peak or Trough-to-Trough distance), the script takes that temporal duration and projects it forward into the future from that pivot point.
2.Vertical Lines & Labels: It draws a subtle dashed vertical line (green for projected peaks, red for projected troughs) extending infinitely into the future/past so you can easily spot when price approaches these rhythmic time points. It also includes a small label indicating which cycle multiple it is (e.g., P-P 1x (36) or P-P 2x (72)).
3.Multipliers: I added a setting called Projection Multipliers (defaulting to 2). This means it will project the cycle duration forward 1x and 2x. You can increase this if you want to project 3x, 4x, etc., into the future.
4.Toggle Option: If the chart gets too cluttered with vertical lines, you can easily turn them off by unchecking "Project Future Time Points" in the settings.
Previously, the indicator strictly alternated between every single local high and local low it found. This resulted in fragmented impulse lines (like the small red downswings in your image) when price paused or made minor retracements within a larger trend.
Now, if the script is drawing a downward swing and encounters multiple small bounces (lower highs and lower lows), it will intelligently extend the existing downswing line to the lowest point rather than reversing early. It will only lock in that downswing and reverse direction when a distinct upward pivot high is confirmed, breaking the downward sequence.
This behavior will natively merge those 5+5+5 micro-swings into the true overarching 15-bar continuous impulse as requested. Indicator
[3Commas] BCH Overbought RSI Fade - Short Indicator BCH Overbought RSI Fade - Short Indicator
🔷 What it does:
This is the signal-only companion to the BCH Overbought RSI Fade Short strategy — it fires alerts without running a backtest engine. It tracks one virtual short at a time, opened when the 5-minute RSI(9) crosses back DOWN through 80 (an overbought rollover). Up to three averaging orders stack at +1%, +2%, and +3% above entry (equal size). The deal closes on a 1.3% Take Profit from the average with a 0.3% trailing lock, or a hard 8% Stop Loss. Running average entry, deployed capital, open PnL, and lifetime realized PnL are all kept from honest fill-by-fill bookkeeping. Every event emits a webhook-ready JSON payload for a DCA Bot.
- Entry on the RSI rollover: 5m RSI(9) crossing DOWN through 80.
- Uniform averaging ladder above entry: +1% / +2% / +3%.
- 1.3% Take Profit with a 0.3% trailing lock, plus a hard 8% Stop Loss.
- Live Open PnL and lifetime Total PnL on the chart.
🔷 Who is it for:
- Intraday traders fading blow-off spikes on BCH on lower timeframes.
- Bot operators wiring PulseWire alerts straight into a DCA Bot via per-event JSON.
- Traders who want a defined-risk short signal — averaging with a stop, not a stopless martingale.
- Operators who want to watch the virtual deal state (entry, fills, exit) directly on the chart.
🔷 How does it work:
Entry Trigger: A 5-minute RSI(9) is pulled with request.security and lookahead disabled (no repaint). The short fires when that RSI was ≥ 80 on the prior 5m close and drops below it on the current close.
Base Entry: On the trigger, the indicator marks a virtual short, records the entry, and seeds the cost-basis ledger with the base order size (default 500 USDT).
Averaging Ladder (uniform): Three safety orders at fixed +1% / +2% / +3% above base, 250 USDT each. Each fill updates the running cost-basis and dispatches its own webhook, raising the virtual average entry.
Honest Bookkeeping: Cost and quantity update on every event, so the average entry, deployed capital, Open PnL, and Total PnL in the status table reflect the true broker-equivalent state.
Exit (TP + Trailing): At 1.3% below the running average, a trailing exit arms; the indicator tracks the in-favor low and signals a close on a 0.3% retrace off it.
Stop Loss: A hard 8% stop above the average fires the close webhook, banks realized PnL, and resets the virtual position.
Lifetime Total PnL: Each closed cycle's realized PnL accumulates into a lifetime counter shown alongside the current-cycle Open PnL.
🔷 Why it's unique:
- Rollover, Not Just Overbought: Firing on the RSI cross-down through 80 skips trades that ignite while momentum is still rising — it waits for the turn.
- Stop-Bounded Averaging: A compact 3-rung ladder plus an explicit 8% stop keeps the worst-case loss known up front.
- Trailing Profit Lock: The 1.3% target arms a 0.3% trail, banking the snap-back while letting an extended drop run.
- Lifetime PnL Tracking: Open and lifetime Total PnL on the chart give strategy-tester-equivalent insight without a backtest.
- Plug-and-Play Webhooks: Base, each AO, and the exit each emit a complete JSON alert; one "Any alert() function call" alert drives a DCA Bot end-to-end.
🔷 Considerations Before Using the Indicator:
Sample Size: The companion strategy's backtest produced 160 closed trades — above the ~100-trade floor commonly used for statistical relevance. Still a single test window, so treat the metrics as indicative.
Short Execution Venue: This signals shorts. Live shorting of BCH requires a margin or perpetual venue — it cannot run on a spot account.
Lower-Timeframe Sensitivity: The trigger runs on a 5-minute RSI. Fast timeframes mean more signals and more fee/slippage drag — confirm both fit your venue.
Stop Loss Discipline: The 8% stop is the core risk control. Base plus three AOs deploy at most ~1,250 USDT (12.5% of the default reference equity); an 8% stop on that caps the worst case near ~1% of equity. Keep the stop on.
Trend Risk: Fading strength suits ranges and choppy tape. In a relentless uptrend the short can be stopped out repeatedly; the rollover trigger reduces, but does not remove, that risk.
Cross Detection Granularity: Entries, AO fills, and exits evaluate on bar close. A spike-and-revert within a single bar may be missed by design — matching realistic polling and avoiding intra-bar over-signaling.
Live vs Historical State: The virtual state is rebuilt from chart history on each recompile. If added mid-deployment or if the live bot diverges (manual interventions, partial fills), states may differ. Toggle the indicator off and on to reset.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester — but the live Total PnL counter gives a running approximation. For full metrics over a ~4.8-month sample (160 closed trades, 84.38% win rate, 1.78% max drawdown, profit factor 2.207, +4.01% net return), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a 5m BCH / USDT chart.
🔸 Review the RSI trigger level, the averaging-order count/deviation/size, the Take Profit, Trailing, and Stop Loss percentages. Defaults mirror the source DCA Bot configuration.
🔸 Set Base Order Size and AO sizes to match your bot's configuration (the avg-entry display becomes meaningful when virtual sizing matches real sizing).
🔸 In the DCA Bot Webhook group, paste the Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_BCH).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. The indicator emits JSON for entry, each averaging order, and the TP/SL exit.
🔷 INDICATOR SETTINGS
Base Order Size (USDT): Virtual order size for the avg-entry / open-PnL computation.
Averaging Orders per Trade: Number of safety orders (default 3).
First AO Size (USDT): Virtual size of each averaging order (uniform by default).
Deviation to First AO (%) / Deviation Step Multiplier: Spacing of the AO ladder above base entry. Defaults to uniform +1% steps.
Order Size Multiplier: Per-rung size scaling (1.0 = uniform).
RSI Timeframe / Length / Crossing Down Level: The RSI(9) crossing-down trigger (default 5m).
Take Profit (%) / Trailing (%): TP distance below average entry and the trailing retrace that closes the position.
Stop Loss (%): Hard stop above average entry.
Active Window: Optional date filter — when ON, the indicator only fires signals between From and To dates.
DCA Bot Webhook: Bot ID, Email Token, and Pair fields injected into every alert payload.
Visualization: Toggle DCA Ladder, Avg / TP / SL plot lines, fill labels, signal triangles, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
