Indicator
Indicator
RichmondHillCM - Liquidity Stress Index V 1.2RichmondHillCM - Liquidity Stress Index V 1.2
The LSI tracks the spread between SOFR (Secured Overnight Financing Rate — the cost of borrowing cash overnight against Treasuries in the repo market) and IORB (Interest on Reserve Balances — the risk-free rate the Fed pays banks on reserves held at the Fed), expressed in basis points.
Why it matters
IORB acts as a soft floor for money-market rates: a bank has little incentive to lend cash below what it can earn risk-free at the Fed. So the position of SOFR relative to IORB is a direct read on how scarce cash is in the funding system.
LSI below 0 (aqua): SOFR trades under the IORB floor. Reserves are abundant, repo plumbing is easy, funding conditions are comfortable.
LSI above 0 (red): SOFR is bid above the floor. Cash is getting scarce, balance-sheet and repo capacity are starting to bind, and reserves are sliding from "abundant" toward "scarce."
Sustained positive prints are a classic early-warning signal of funding stress — the September 2019 repo blow-up being the textbook example. Watching this spread helps anticipate when the Fed's reserve backdrop is tightening enough to force a policy response (standing repo facility usage, balance-sheet adjustments, or an end to QT).
How to read it
Zero line = the IORB floor.
Dashed line = a configurable stress threshold (default 5 bps). When LSI breaks above it, the background shades red to flag an elevated-stress regime.
The further and longer LSI stays positive, the more acute the funding pressure.
Inputs
Smoothing (SMA length): 1 = raw daily spread; raise to filter day-to-day noise.
Stress threshold (bps): the level above which funding stress is flagged.
Notes
SOFR and IORB are sourced from FRED and published daily, with IORB stepping only on FOMC decisions — so on intraday charts the daily values hold flat. The daily timeframe is the honest resolution for this gauge. Each leg is requested separately and differenced in-script for robust alignment rather than relying on a spread symbol.
Original concept credit: @gstoyanov. Released under the Mozilla Public License 2.0. Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
ICT Macro Lines - Today OnlyICT Macro Lines - Today Only is a visual intraday timing tool that marks selected ICT-style macro windows on the current trading day only.
The script draws vertical Start, Mid and End markers for predefined New York session windows, including selected NY Macro windows, the NY AM Silver Bullet window, the Dangerous Lunch Macro, the PM Macro and the Power Hour window.
The purpose of this indicator is to help intraday traders keep important time-based windows visible directly on the chart without manually drawing the same timing lines every day.
This indicator does not generate buy or sell signals. It does not predict direction, measure trend strength, detect entries, or provide automated trade confirmation. It is a chart-organization tool focused only on time structure.
How it works:
The script uses the selected timezone, set by default to America/New_York, and calculates today’s timestamps for each enabled macro window.
For each enabled window, it can draw three vertical markers:
S = Start of the window
M = Middle of the window
E = End of the window
The indicator can optionally hide time markers that have already passed during the current day. This keeps the chart cleaner during live intraday analysis.
It can also display a compact table showing the enabled macro windows and their Start, Mid and End times.
Dangerous Lunch Macro:
The Lunch Macro window from 11:50 to 12:10 New York time is intentionally highlighted in red and labeled as Dangerous Lunch Macro. In this implementation, it is treated as a higher-risk ICT-style timing window. The red color is fixed and cannot be changed in the script settings.
This red highlight is only a visual warning. It is not a buy signal, sell signal, entry confirmation or trade recommendation.
Main features:
- Today-only macro markers based on New York time.
- Optional NY Macro windows.
- Optional NY AM Silver Bullet window.
- Optional Dangerous Lunch Macro window.
- Optional PM Macro and Power Hour window.
- Start / Mid / End vertical line markers.
- Optional line labels: S/M/E, time, or full description.
- Optional subtle background shading for active macro windows.
- Optional macro table with window times.
- Fixed red color for the Dangerous Lunch Macro.
- Customizable line color for all other macro windows.
- Customizable line style, width, text size and table position.
- Designed for intraday charts.
Suggested use:
Use the script on clean intraday charts such as 1-minute, 3-minute, 5-minute or 15-minute charts.
The markers are intended to help traders observe price behavior around specific time windows. Any trading decision should be based on the trader’s own trading model, risk management and market context.
Originality and usefulness:
This script is not a combination of unrelated indicators. Its purpose is to consolidate recurring ICT-style intraday time windows into a clean, configurable, today-only visual layout.
Instead of manually drawing macro timing lines each session, the script automatically places the selected windows using New York time and lets the user control visibility, labels, background shading and the summary table.
Limitations:
- The script is intended for intraday timeframes.
- It is a visual timing reference only.
- It does not provide trade signals.
- It does not determine market bias.
- It does not include backtesting or performance claims.
- It does not predict price direction.
- Time windows are fixed and should be interpreted by the user within their own trading model.
This publication is for educational and chart-organization purposes only. Indicator
GB Session & Liquidity ToolSession & Liquidity Tool — Asian Range + London KZ + NY Midnight Open
A clean, fully configurable session tool built for traders who use liquidity-based
strategies (ICT, SMC, PO3). No clutter — just the three key references you need
before every trading session.
──────────────────────────────────────────
WHAT IT DOES
──────────────────────────────────────────
▸ ASIAN RANGE
Draws the Asian session as a box that builds in real-time as the session progresses.
Displays the pip range inside the box so you instantly know if Asia was tight or
expansive — a critical filter before entering any London setup.
Includes Standard Deviation levels (±1 SD by default, fully configurable) shown as
dashed lines spanning the session. These let you quickly assess whether London's
move is within normal manipulation range (≤1 SD) or an extended continuation
(>2 SD) — directly influencing whether to fade or follow the move.
Supports multiple sessions in history so you can compare ranges across days.
▸ LONDON KILL ZONE
Marks the start and end of the London Kill Zone with vertical dashed lines.
This is the primary manipulation window — the zone where institutional sweeps
and Judas Swings occur before the real move begins.
Configurable history to display multiple past sessions.
▸ NY MIDNIGHT OPEN
Plots a horizontal line at the exact open price of 00:00 NY time for each day.
The Midnight Open is one of the most important daily reference levels in
liquidity-based trading — price trading above or below it determines daily bias
and confirms or invalidates setups throughout the session.
Each line is labelled with its date. Configurable history (default: last 5 days).
──────────────────────────────────────────
KEY FEATURES
──────────────────────────────────────────
✦ All sessions fully configurable — timezone, start/end times, colors, history count
✦ Asian Range: background color, border color, border width — all adjustable
✦ SD multiplier configurable (0.1 to 5.0x) — use 1.0 for standard 1 SD,
2.0 for 2 SD, etc.
✦ Works on any asset — Forex, Indices, Crypto
✦ Optimized for intraday timeframes (1m to 4H)
✦ Clean object management — no performance issues on historical data
──────────────────────────────────────────
HOW TO USE
──────────────────────────────────────────
1. Add to chart on your execution timeframe (5M recommended)
2. Set your timezone in each section (default: America/New_York)
3. Before London opens — check if Asia was tight (good) or expansive (caution)
4. During London KZ — watch for a sweep of the Asian High or Low
5. Use the SD lines to gauge extension: ≤1 SD = normal manipulation,
proceed with setup / >2 SD with body close = likely continuation, don't fade
6. Use the Midnight Open as daily bias filter throughout the session
──────────────────────────────────────────
BEST FOR
──────────────────────────────────────────
ICT / SMC traders · PO3 (Power of 3) · Asia Sweep setups ·
London Kill Zone entries · Liquidity-based intraday strategies
──────────────────────────────────────────
SETTINGS
──────────────────────────────────────────
Asian Range → Show / Timezone / Start / End / History / Background /
Border color & width / SD on-off / SD multiplier / SD color & width
London Kill Zone → Show / Timezone / Start / End / Color / Width / History
NY Midnight Open → Show / Timezone / Color / History (days) Indicator
Indicator
Indicator
Adaptive Harmonic Ribbons# Adaptive Harmonic Ribbons (AHR)
Adaptive Harmonic Ribbons (AHR) is a trend and market structure indicator that replaces fixed moving-average lengths with an adaptive framework driven by the market's estimated dominant cycle.
Traditional moving-average ribbons, including GMMA-style approaches, use predefined periods such as 5, 10, 20 or 60 bars. While effective under stable conditions, these lengths represent a fixed assumption about market behaviour and must often be re-optimized when volatility or market rhythm changes.
AHR takes a different approach. Instead of using fixed lookback periods, it estimates the current dominant market cycle using a Hilbert Transform-based approach. Every moving average in the ribbon is then derived from that cycle, allowing the entire ribbon to expand and contract automatically as market conditions evolve.
Rather than changing only a single adaptive moving average, AHR adapts the entire ribbon while preserving proportional spacing through harmonic scaling. This allows the relationship between the ribbon layers to remain consistent across changing market regimes.
---
## Methodology
The indicator consists of four main components:
### 1. Dominant Cycle Estimation
The market's dominant cycle is estimated continuously using a Hilbert Transform implementation inspired by John F. Ehlers' work on digital signal processing. The measured cycle is constrained within user-defined minimum and maximum bounds to improve stability.
This dominant cycle becomes the reference period from which every ribbon length is calculated.
### 2. Harmonic Length Generation
Instead of manually specifying twelve moving-average periods, AHR generates them automatically.
Fast ribbon lengths are created by dividing the dominant cycle using a harmonic expansion factor.
Slow ribbon lengths are created by multiplying the dominant cycle by the same factor.
Because every ribbon layer is derived from the same adaptive reference, the spacing between layers remains proportional even as market conditions change.
The expansion multiplier can be adjusted to produce tighter or wider ribbon structures using relationships such as:
* Third-Octave (1.26)
* Half-Octave (1.414)
* Golden Ratio (1.618)
* Full Octave (2.0)
### 3. Adaptive Smoothing
Each ribbon layer can be calculated using one of several smoothing engines:
* SuperSmoother Filter (SSF)
* Three-Pole SuperSmoother (SSF3)
* EMA
* Double EMA (EMA2)
The adaptive framework remains unchanged regardless of the smoothing method selected.
### 4. Dynamic Ribbon Construction
The resulting fast and slow ribbon groups continuously adjust their lengths as the estimated dominant cycle changes.
Instead of requiring manual optimization for different symbols or timeframes, the ribbon geometry adapts automatically while maintaining its overall structure.
---
## Interpreting the Indicator
AHR is intended as a trend analysis and market structure tool rather than a signal generator.
Some common observations include:
Trend Agreement
When both ribbon groups slope in the same direction and maintain consistent separation, the market may be exhibiting directional strength.
Compression
When ribbon layers contract toward one another, the market may be entering a lower-volatility consolidation phase.
Expansion
When the ribbons begin separating after a period of compression, this may indicate increasing directional momentum.
Pullbacks
During established trends, price retracements into the fast ribbon or the space between ribbon groups can help traders evaluate whether trend structure remains intact.
As with any moving-average-based indicator, AHR should be used alongside broader market context and appropriate risk management.
---
## Inputs
Source
Price series used for all calculations.
Minimum / Maximum Dominant Cycle
Defines the allowable range for the adaptive cycle estimator.
Moving Average Type
Selects the smoothing algorithm used to construct the ribbon.
Expansion Multiplier
Controls the proportional spacing between ribbon layers.
Maximum Transparency
Adjusts the visual fading effect within each ribbon.
---
## Acknowledgements
This indicator draws inspiration from two well-established areas of technical analysis:
* John F. Ehlers' research into dominant cycle estimation, Hilbert Transform techniques and SuperSmoother filtering.
* Daryl Guppy's concept of separating market participants into fast and slow moving-average groups.
The adaptive ribbon construction, harmonic length generation, dominant-cycle-derived scaling, and dynamic ribbon framework are original components developed specifically for this implementation.
Indicator
BTC RSI Indicator [3Commas]BTC RSI Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a long-only DCA workflow on BTC / USDT. It tracks a single virtual position: a base entry opens when 4h RSI(14) drops below 28; if price keeps falling, five averaging orders add to the virtual position at fixed deviations from the base entry, each larger than the last; the position is then closed at a fixed take-profit above the blended average entry. The indicator computes running average entry, deployed capital, open PnL, and lifetime realized PnL from honest fill-by-fill bookkeeping, and emits a webhook-ready JSON alert payload on the base order, every safety order, and the close.
Single entry filter: 4h RSI(14) below 28 (deep oversold).
Five averaging orders at fixed deviations (−2%, −5%, −9.5%, −16%, −25%) with 1.8× size scaling per rung.
Fixed take-profit on the blended average entry; no trailing, no stop loss.
Honest virtual bookkeeping: avg entry, deployed capital, Open PnL, and cumulative realized PnL displayed live on the chart.
🔷 Who is it for:
Swing traders accumulating BTC on deep RSI flushes who want a chart-driven signal source.
Bot operators who want base / safety-order / close webhook JSON ready to drive a DCA Bot.
Traders comfortable with martingale-style averaging who size their capital to the worst-case ladder fill.
Traders who want strategy-tester-equivalent insight (live realized / unrealized PnL) without running a backtest engine.
🔷 How does it work:
Base Entry: On each closed 4h bar the indicator reads RSI(14). When RSI falls below 28 and there is no open virtual position, it marks a virtual base order at the close price and dispatches the entry webhook.
Averaging Orders: Once in a virtual position, the indicator watches price relative to the original base entry. The five safety orders are armed at fixed deviations from that base entry — not cumulatively — at −2%, −5%, −9.5%, −16%, and −25%. As each threshold is crossed on bar close, the corresponding safety order is recorded and its webhook fires. Order sizes scale 1.8× per rung ($900 → $1,620 → $2,916 → $5,249 → $9,448 from a $500 base), pulling the blended average entry down toward the latest fill.
Honest Virtual Bookkeeping: Total cost and qty are updated incrementally on every event, so the avg entry, deployed capital, and Open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcut, no synthetic averaging.
Take Profit & Lifetime PnL: When price closes at or above the take-profit level (a fixed percentage above the average entry), the virtual position is closed, its round-trip profit is added to a persistent realized-PnL counter, and the close webhook fires. The status table displays both Open PnL (current unrealized state) and cumulative realized PnL, so live performance is visible directly on the chart.
Capital Bounds: Total virtual deployed capital cannot exceed the base order plus the five safety orders. Once all five are filled, no further adds occur — the position simply waits for the take-profit.
🔷 Why it's unique:
Deep-Oversold-Only Entries: A single, strict RSI(14) < 28 filter on 4h keeps the signal quiet in normal conditions and only fires after a meaningful flush.
Fixed-Deviation Martingale Ladder: Safety orders are placed at fixed percentages from the base entry with deliberate 1.8× size scaling — a transparent, fully-specified averaging schedule rather than an opaque adaptive grid.
Full Webhook Chain: Base order, each safety order, and the close all emit dedicated JSON payloads. One PulseWire alert with "Any alert() function call" drives a 3Commas DCA Bot end-to-end.
Live PnL Tracking: Open PnL and cumulative realized PnL are displayed live on the chart — the indicator gives strategy-tester-equivalent insight without running a backtest.
🔷 Considerations Before Using the Indicator:
Martingale Tail Risk: Order sizes scale 1.8× per rung, so the deepest fills are by far the largest. If BTC trends hard below the −25% AO5 level without recovering to take-profit, the virtual position sits fully loaded with no further adds and no stop — Open PnL can grow deeply negative until price reverts.
No Stop Loss: There is no exit signal on adverse moves. Risk is bounded only by the fixed ladder allocation (base + five AOs ≈ $20,633 at default sizing). If a hard exchange-side stop is required, configure it on the bot directly.
Match Sizing to Your Bot: The avg-entry and PnL display becomes meaningful only when the indicator's base/AO sizing matches your real DCA Bot configuration.
Cross Detection Granularity: Base, safety-order, and take-profit events are evaluated on bar close. A bar that spikes through a level and returns within the same bar may be missed by design — this matches realistic polling behavior and avoids over-signaling on intra-bar wicks.
Live vs Historical State: The virtual position is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester — but the live realized-PnL counter in the status table gives a running approximation. For full metrics over the reference ~30-month sample (62 closed trades, 70.97% win rate, 3.79% max drawdown, profit factor 4.028, +3.08% net return over January 1, 2024 – June 29, 2026), use the companion strategy version on identical parameters. Note the 62-trade sample is below the ~100-trade floor for statistical confidence — treat those metrics as indicative.
🔷 How to Use It:
🔸 Add the indicator to a 4h BTC / USDT chart.
🔸 Confirm the RSI level (28), the five AO deviations and sizes, and the take-profit percentage match your bot's configuration. Match the base/AO sizing so the avg-entry and PnL display stays meaningful.
🔸 In the DCA Bot Webhook group, paste the Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_BTC).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. The base order, each safety order, and the close will each emit a dedicated JSON payload formatted for direct DCA Bot consumption.
🔷 INDICATOR SETTINGS
Base Order Size: Virtual capital committed on the first (base) entry.
AO Deviations: Fixed percentage distances from the base entry where each safety order fires.
AO Sizes: Virtual capital per safety order (1.8× scaling by default).
RSI Timeframe / Length / Level: Oversold filter for the base entry (default 4h, 14, below 28).
Take Profit (%): Distance above average entry where the full position closes.
DCA Bot Webhook: Bot ID, Email Token, and Pair fields injected into every alert payload.
Visualization: Toggle the AO ladder, fill labels, avg/TP lines, and status table (shows status, AOs filled, base/avg entry, TP target, deployed capital, open PnL, RSI, and cumulative realized PnL).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
BTC RSI Strategy [3Commas]BTC RSI Strategy
🔷 What it does:
This is a long-only DCA (Dollar-Cost Averaging) strategy for BTC / USDT that opens a position only in deep-oversold conditions and then averages down on a fixed safety-order ladder. A base order fires when 4h RSI(14) drops below 28; if price keeps falling, five averaging orders add to the position at fixed deviations from the base entry, each larger than the last. The full position is closed at a fixed take-profit above the blended average entry. There is no trailing exit and no stop loss — the position is structurally bounded by the five-order ladder.
- Single entry filter: 4h RSI(14) below 28 (deep oversold).
- Five averaging orders at fixed deviations (−2%, −5%, −9.5%, −16%, −25%) with 1.8× size scaling per rung.
- Fixed take-profit on the blended average entry; no trailing, no stop loss.
- Every fill and close emits a webhook-ready JSON alert payload for a DCA Bot.
🔷 Who is it for:
- Swing traders accumulating BTC on deep RSI flushes rather than chasing momentum.
- Bot operators who want a chart-driven signal source with base / safety-order / close webhook JSON ready to drive a DCA Bot.
- Traders comfortable with martingale-style averaging who size their capital to the worst-case ladder fill.
- Range / mean-reversion traders who prefer mechanical oversold entries over discretionary timing.
🔷 How does it work:
Entry (Base Order): On each closed 4h bar the strategy reads RSI(14). When RSI falls below 28 and there is no open position, it opens the base order at market (or limit, optionally) and dispatches the entry webhook.
Averaging Orders: Once in a position, the strategy watches price relative to the original base entry. The five safety orders are armed at fixed deviations from that base entry — not cumulatively — at −2%, −5%, −9.5%, −16%, and −25%. As each threshold is crossed on bar close, the corresponding averaging order fires. Order sizes scale 1.8× per rung ($900 → $1,620 → $2,916 → $5,249 → $9,448 from a $500 base), pulling the blended average entry down toward the latest fill.
Exit (Take Profit): While in a position, the strategy computes a take-profit price a fixed percentage above the current average entry. When price closes at or above that level, the entire position is closed at market and the close webhook fires. There is no trailing and no stop loss.
Capital Bounds: Total deployed capital cannot exceed the base order plus the five safety orders. Once all five averaging orders are filled, no further adds occur — the position simply waits for the take-profit. This ladder cap is the strategy's primary risk control.
🔷 Why it's unique:
- Deep-Oversold-Only Entries: A single, strict RSI(14) < 28 filter on 4h keeps the strategy out of the market in normal conditions and only commits capital after a meaningful flush.
- Fixed-Deviation Martingale Ladder: Safety orders are placed at fixed percentages from the base entry with deliberate 1.8× size scaling, so each rung has progressively more influence on the average — a transparent, fully-specified averaging schedule rather than an opaque adaptive grid.
- Full Webhook Chain: Base order, each safety order, and the close all emit dedicated JSON payloads. The strategy can drive a 3Commas DCA Bot end-to-end with no glue layer.
- On-Chart Transparency: The AO ladder, average entry, and take-profit target are plotted live, and the status table reports RSI, AOs filled, base/average entry, TP target, and max deployable capital — so the position state is always visible.
🔷 Considerations Before Using the Strategy:
Trade Volume — Below the Statistical Floor: The reference backtest produced 62 closed trades over ~30 months. This is below the ~100-trade threshold often used as a floor for statistical relevance, so treat the win rate and profit factor as indicative rather than conclusive. The strict RSI < 28 filter is what keeps the trade count low — and BTC is less volatile than smaller alts, so deep flushes below the entry threshold are relatively rare.
Martingale Tail Risk: Order sizes scale 1.8× per rung, so the deepest fills are by far the largest. If BTC trends hard below the −25% AO5 level without recovering to take-profit, the position sits fully loaded with no further adds and no stop — unrealized loss can grow until price reverts. The 1.8× scaling amplifies both the recovery speed and the downside.
No Stop Loss Justification: There is no exit on adverse moves. Per-order risk is bounded by the fixed ladder allocation; aggregate exposure is capped at base + five AOs (≈ $20,633 on the default $100k account, ~20.6% of equity). Size the base/AO inputs down to match the worst-case exposure you are willing to hold.
Capital Deployment & Drawdown: The reference backtest reached a 3.79% maximum equity drawdown at default sizing — but that depends on the configured ladder fitting within BTC's observed swings. A deeper or more prolonged decline than the test sample would produce a larger drawdown.
Fees: The default commission (0.06% per trade) should be matched to your exchange's actual taker fees. With a fixed 3% take-profit the per-trade edge is modest, so a fee mismatch matters.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, particularly for martingale-style averaging strategies whose risk profile is dominated by rare deep drawdowns.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:BTCUSDT.P (Perpetual) — strategy is portable to any BTC / USDT pair.
Timeframe: 4H (RSI sampled on 4h).
Test Period: January 1, 2024 — June 29, 2026 (~30 months).
Initial Capital: 100,000 USDT.
Base Order Size: 500 USDT.
Averaging Orders: 5, at −2% / −5% / −9.5% / −16% / −25% from base entry.
AO Sizing: 1.8× per rung — 900 / 1,620 / 2,916 / 5,249 / 9,448 USDT.
Max Deployed Capital: ≈ 20,633 USDT (~20.6% of equity, all AOs filled).
Commission: 0.06% per trade.
Slippage: 3 ticks.
Entry Filter: 4h RSI(14) below 28.
Take Profit: 3% above average entry.
Stop Loss: None — ladder allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +3,078.29 USDT (+3.08%)
Max Equity Drawdown: 3,852.12 USDT (3.79%)
Total Closed Trades: 62
Percent Profitable: 70.97% (44 / 62)
Profit Factor: 4.028
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and confirm the RSI level (28), the five AO deviations and sizes, and the take-profit percentage match your risk profile. Scale the base/AO sizes down for lower exposure.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band — note this configuration reached 3.79%. Keep in mind the 62-trade sample is below the ~100-trade floor for statistical confidence.
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. The base order, each safety order, and the close will each emit a dedicated JSON payload.
🔷 INDICATOR SETTINGS
Base Order Size: Capital committed on the first (base) entry.
AO Deviations: Fixed percentage distances from the base entry where each safety order fires.
AO Sizes: Capital per safety order (1.8× scaling by default).
RSI Timeframe / Length / Level: Oversold filter for the base entry (default 4h, 14, below 28).
Take Profit (%): Distance above average entry where the full position closes.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle the AO ladder, fill labels, avg/TP lines, and status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
Indicator
ICT Killzones & Silver BulletEN: Highlights the key ICT time windows on your chart — Killzones and Silver Bullet
sessions — so you instantly see when institutional activity is most likely.
A clean time-window tool for ICT / Smart Money traders. It shades the key intraday
windows directly on the chart, in New York time, regardless of your local timezone:
• Killzones — 7 fully customizable time windows (on/off, start and end by hour and
minute). Defaults follow the high-activity ICT macro windows around session opens.
• Silver Bullet — the three classic one-hour ICT windows where setups are hunted:
London (03:00–04:00 NY), NY AM (10:00–11:00 NY), NY PM (14:00–15:00 NY).
Every window is editable, has its own toggle, color, border style and optional label.
The indicator only draws a window while price is inside it, keeping the chart clean.
raders waste focus tracking the clock — when is London, when is the Silver Bullet,
is price inside a high-probability window. This tool marks every key window
automatically in NY time, so you never miss a session and never miscount the hours.
WHAT IT SHOWS
Shaded boxes appear only while price is inside a time window. Killzones use one color,
Silver Bullet windows another, each with an optional label.
KILLZONES (group "Killzones")
- "Show Killzones" — turn the whole module on/off.
- Color, border style (Solid/Dotted/Dashed/No border), border transparency, labels.
- 7 zones (KZ1–KZ7): each row = , NY time.
- Defaults follow ICT macro windows. Edit any zone to your own times.
SILVER BULLET (group "Silver Bullet")
- "Show Silver Bullet" — on/off, plus color, border transparency, labels.
- 3 classic one-hour windows (editable by hour, NY time):
London SB: 03:00–04:00
NY AM SB: 10:00–11:00
NY PM SB: 14:00–15:00
HOW TO USE
1. All times are New York — no manual timezone conversion needed.
2. Best on M15 and lower, where the windows are clearly visible.
3. Look for entries / liquidity grabs INSIDE these windows — that is when
institutional activity is most likely.
4. Disable the windows you don't trade to keep the chart clean.
WANT CLASSIC KILLZONES INSTEAD OF MACROS?
Set wider windows, e.g. London 02:00–05:00, NY AM 07:00–10:00, NY PM 13:30–16:00.
NOTE: This is an analytical timing tool, not financial advice. Always confirm with
price action and risk management. Indicator
Indicator
Indicator
Indicator
Indicator
Sessionscope [Quantum Algo]Sessionscope is a time-based ICT killzone tool that plots the four primary intraday
killzones, projects the liquidity each one creates, and then measures what happens after
that liquidity is taken. It is built for traders who use Smart Money / ICT concepts and
want session context plus a quantified read on how each killzone behaves on their specific
instrument.
It is not a buy/sell signal system. It is a context and statistics tool.
WHAT IT PLOTS
- Four killzone range boxes, each with its high, low and equilibrium (50%) level.
- Forward-projected session liquidity: each closed killzone's high as buy-side liquidity
(BSL) and its low as sell-side liquidity (SSL).
- Liquidity sweep marks, recolored by outcome (reversal vs continuation).
- The New York midnight open (00:00 ET) as a daily reference line.
- A statistics dashboard summarizing each killzone over the full chart history.
THE FOUR KILLZONES
Default windows, in New York time (America/New_York):
- Asia 20:00 - 00:00
- London Open 02:00 - 05:00
- New York AM 07:00 - 10:00
- London Close 10:00 - 12:00
These are the conventional ICT killzone windows. Because the timezone is anchored to
America/New_York rather than a fixed UTC offset, the windows automatically follow US
daylight saving (EST/EDT) and stay aligned year-round. All four windows, names and colors
are fully editable, so you can shift them, repurpose one (for example to a New York PM or
Silver Bullet window), or adapt the New York window to index timing (08:30 - 11:00) if you
trade futures rather than forex.
SESSION LIQUIDITY (BSL / SSL)
While a killzone is open, the box tracks its developing high and low in real time. When the
killzone closes, those extremes are frozen and projected forward as horizontal liquidity
levels - the high as buy-side liquidity, the low as sell-side liquidity - and extended until
the next instance of that same session. A sweep is registered when price trades through a
projected level (a wick or close beyond the high, or beyond the low). The level can be frozen
at the moment of the sweep to keep the chart clean.
SWEEP OUTCOME ENGINE (the core idea)
Marking a sweep is common. Sessionscope goes further and classifies the outcome of every
sweep:
- High sweep -> REVERSAL if price closes back below the swept high within a configurable
number of bars; otherwise CONTINUATION.
- Low sweep -> REVERSAL if price closes back above the swept low within that window;
otherwise CONTINUATION.
A reversal is the classic ICT liquidity-grab outcome (the level is run, then rejected). A
continuation means the level broke and held (a genuine expansion). Each sweep mark is
recolored to its resolved outcome, and the result feeds the Rev% statistic below. This turns
the qualitative liquidity-grab premise into a measured, per-session number.
NEW YORK MIDNIGHT OPEN
The first traded price after 00:00 America/New_York is captured each day and drawn as a
horizontal reference for that session - a level many ICT traders use as a daily equilibrium
anchor. It is fixed once printed and does not move.
STATISTICS DASHBOARD
For each enabled killzone, accumulated over the entire visible chart history:
- Avg Rng : average high-to-low range of the session, in price.
- xATR : that average range expressed as a multiple of the daily ATR(14), so you can see
which killzone expands most relative to typical daily volatility.
- Swept% : how often the session's liquidity is taken - the share of its high and low
levels that get swept before the session next reopens.
- Rev% : of the sweeps that occurred, how often price reversed back inside the range
(a grab) rather than continuing through (a breakout).
- Bias% : share of sessions that closed above their open (directional tendency).
- n : number of completed sessions in the sample.
Read together, Swept% and Rev% answer two distinct questions: how often does this killzone's
liquidity get run, and when it does, how often does it snap back? Bias% and xATR add the
session's directional lean and its size relative to the day.
HOW IT WORKS (calculation notes)
- Sessions are detected with Pine's time/session function in the chosen timezone; the box
high/low are running extremes of the bars inside each window.
- The daily ATR used for xATR is requested from the 1D timeframe using an offset expression
with lookahead disabled, so it is fully confirmed and constant intraday (no lookahead bias).
- Sweep outcomes are evaluated only on confirmed price relative to fixed, already-closed
levels.
- Statistics are accumulated over the full chart history independently of what is drawn.
- To keep the price scale anchored to current price, only a configurable number of recent
sessions of boxes and levels are kept on the chart (older drawings are removed); this does
not affect the statistics, which always use full history.
WHAT MAKES IT DIFFERENT
Most session and killzone tools stop at colored boxes, session highs/lows, midpoints and a
basic range table. Sessionscope adds the outcome layer: it does not just show that liquidity
was swept, it measures whether each session's sweeps tend to reverse or continue, and colors
them accordingly. The Rev% metric, combined with Swept%, is the part that goes beyond a
standard session-range tool.
SETTINGS
Grouped for clarity: Timezone; Sessions / Killzones (per-session enable, name, window,
color); Box & Level Visuals (boxes, fills, high/low, equilibrium, labels, history cap);
Session Liquidity & Sweeps (projection, sweep marks, freeze-on-sweep, line style, reversal
window, outcome coloring); New York Midnight Open; Statistics Dashboard (position, size);
and Alerts.
HOW TO USE
- Apply on an intraday timeframe; 1m to 1h work best (5m or 15m for clean session structure).
- Mark your higher-timeframe bias first, then use the killzone windows to time entries.
- When a killzone level is swept, read the outcome color and that session's historical Rev%
to gauge whether a reversal back inside the range is the higher-probability path.
- Use xATR to see which session is statistically the most active on your instrument, and
Bias% for its directional lean.
REPAINTING
Boxes and the live high/low update in real time while the current session is forming - this
is expected real-time behavior, not lookahead. Once a session closes, its levels are fixed;
sweeps are detected on price crossing those fixed levels; and an outcome, once resolved on a
closed bar, does not change. No lookahead is used anywhere in the script.
CONCEPTS AND CREDIT
The concepts used here - killzones, buy-side and sell-side liquidity, liquidity sweeps, the
midnight open, and premium/discount equilibrium - originate with the Inner Circle Trader
(Michael J. Huddleston) and the wider Smart Money Concepts / price-action community, where
they are taught and discussed openly. The session window defaults follow the killzone times
commonly used by that community. All code in this script - the session detection, liquidity
projection, sweep-outcome classification and statistics engine - is written independently and
reuses no third-party code. It is published open-source so anyone can read, verify and modify
it under PulseWire's House Rules.
DISCLAIMER
This script is provided for educational and informational purposes only. It is not financial,
investment or trading advice, and it does not produce buy or sell recommendations. All
statistics are descriptive measurements of historical data on the current chart and do not
predict future price behavior; past behavior of a session or level does not guarantee future
results. Trading involves substantial risk of loss. You are solely responsible for your own
decisions and risk management. Test any tool thoroughly on your own markets and timeframes
before relying on it. Indicator
XRP RSI Indicator [3Commas]XRP RSI Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a long-only DCA workflow on XRP / USDT. It tracks a single virtual position: a base entry opens when 4h RSI(14) drops below 28; if price keeps falling, five averaging orders add to the virtual position at fixed deviations from the base entry, each larger than the last; the position is then closed at a fixed take-profit above the blended average entry. The indicator computes running average entry, deployed capital, open PnL, and lifetime realized PnL from honest fill-by-fill bookkeeping, and emits a webhook-ready JSON alert payload on the base order, every safety order, and the close.
- Single entry filter: 4h RSI(14) below 28 (deep oversold).
- Five averaging orders at fixed deviations (−2%, −5%, −9.5%, −16%, −25%) with 1.8× size scaling per rung.
- Fixed take-profit on the blended average entry; no trailing, no stop loss.
- Honest virtual bookkeeping: avg entry, deployed capital, Open PnL, and cumulative realized PnL displayed live on the chart.
🔷 Who is it for:
- Swing traders accumulating XRP on deep RSI flushes who want a chart-driven signal source.
- Bot operators who want base / safety-order / close webhook JSON ready to drive a DCA Bot.
- Traders comfortable with martingale-style averaging who size their capital to the worst-case ladder fill.
- Traders who want strategy-tester-equivalent insight (live realized / unrealized PnL) without running a backtest engine.
🔷 How does it work:
Base Entry: On each closed 4h bar the indicator reads RSI(14). When RSI falls below 28 and there is no open virtual position, it marks a virtual base order at the close price and dispatches the entry webhook.
Averaging Orders: Once in a virtual position, the indicator watches price relative to the original base entry. The five safety orders are armed at fixed deviations from that base entry — not cumulatively — at −2%, −5%, −9.5%, −16%, and −25%. As each threshold is crossed on bar close, the corresponding safety order is recorded and its webhook fires. Order sizes scale 1.8× per rung ($900 → $1,620 → $2,916 → $5,249 → $9,448 from a $500 base), pulling the blended average entry down toward the latest fill.
Honest Virtual Bookkeeping: Total cost and qty are updated incrementally on every event, so the avg entry, deployed capital, and Open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcut, no synthetic averaging.
Take Profit & Lifetime PnL: When price closes at or above the take-profit level (a fixed percentage above the average entry), the virtual position is closed, its round-trip profit is added to a persistent realized-PnL counter, and the close webhook fires. The status table displays both Open PnL (current unrealized state) and cumulative realized PnL, so live performance is visible directly on the chart.
Capital Bounds: Total virtual deployed capital cannot exceed the base order plus the five safety orders. Once all five are filled, no further adds occur — the position simply waits for the take-profit.
🔷 Why it's unique:
- Deep-Oversold-Only Entries: A single, strict RSI(14) < 28 filter on 4h keeps the signal quiet in normal conditions and only fires after a meaningful flush.
- Fixed-Deviation Martingale Ladder: Safety orders are placed at fixed percentages from the base entry with deliberate 1.8× size scaling — a transparent, fully-specified averaging schedule rather than an opaque adaptive grid.
- Full Webhook Chain: Base order, each safety order, and the close all emit dedicated JSON payloads. One PulseWire alert with "Any alert() function call" drives a 3Commas DCA Bot end-to-end.
- Live PnL Tracking: Open PnL and cumulative realized PnL are displayed live on the chart — the indicator gives strategy-tester-equivalent insight without running a backtest.
🔷 Considerations Before Using the Indicator:
Martingale Tail Risk: Order sizes scale 1.8× per rung, so the deepest fills are by far the largest. If XRP trends hard below the −25% AO5 level without recovering to take-profit, the virtual position sits fully loaded with no further adds and no stop — Open PnL can grow deeply negative until price reverts.
No Stop Loss: There is no exit signal on adverse moves. Risk is bounded only by the fixed ladder allocation (base + five AOs ≈ $20,633 at default sizing). If a hard exchange-side stop is required, configure it on the bot directly.
Match Sizing to Your Bot: The avg-entry and PnL display becomes meaningful only when the indicator's base/AO sizing matches your real DCA Bot configuration.
Cross Detection Granularity: Base, safety-order, and take-profit events are evaluated on bar close. A bar that spikes through a level and returns within the same bar may be missed by design — this matches realistic polling behavior and avoids over-signaling on intra-bar wicks.
Live vs Historical State: The virtual position is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester — but the live realized-PnL counter in the status table gives a running approximation. For full metrics over the reference ~30-month sample (75 closed trades, 76.00% win rate, 1.00% max drawdown, profit factor 13.058, +3.45% net return over January 1, 2024 – June 29, 2026), use the companion strategy version on identical parameters. Note the 75-trade sample is below the ~100-trade floor for statistical confidence — treat those metrics, including the high profit factor, as indicative.
🔷 How to Use It:
🔸 Add the indicator to a 4h XRP / USDT chart.
🔸 Confirm the RSI level (28), the five AO deviations and sizes, and the take-profit percentage match your bot's configuration. Match the base/AO sizing so the avg-entry and PnL display stays meaningful.
🔸 In the DCA Bot Webhook group, paste the Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_XRP).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. The base order, each safety order, and the close will each emit a dedicated JSON payload formatted for direct DCA Bot consumption.
🔷 INDICATOR SETTINGS
Base Order Size: Virtual capital committed on the first (base) entry.
AO Deviations: Fixed percentage distances from the base entry where each safety order fires.
AO Sizes: Virtual capital per safety order (1.8× scaling by default).
RSI Timeframe / Length / Level: Oversold filter for the base entry (default 4h, 14, below 28).
Take Profit (%): Distance above average entry where the full position closes.
DCA Bot Webhook: Bot ID, Email Token, and Pair fields injected into every alert payload.
Visualization: Toggle the AO ladder, fill labels, avg/TP lines, and status table (shows status, AOs filled, base/avg entry, TP target, deployed capital, open PnL, RSI, and cumulative realized PnL).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
