Essence ModelEssence Model — Bias - 7H Profiles - Entries
A complete, open-source implementation of my understanding of the Essence Model — a session-based intraday framework built on rytrades' teachings, extended with the 7-hour daily-profile taxonomy taught by AM Trades. The script reads the day the way the model does: previous day sets the bias, the overnight sessions validate or break it, the 7h profile names the day, and entries only exist where all of it lines up.
Daily Bias
The previous day's candle sets the directional bias. A fib from its high→close (bearish) or low→close (bullish) marks the 25% and 50% — bias stays valid while completed 210-minute candles respect the 25%. A close through it doesn't kill the day: the reversal framework flips the working direction ( "yesterday's 25% was broken to the upside — expecting higher" ), re-points the projections, and un-flips only if the 25% is reclaimed while the 50% held.
7H Frameworks & Profiles
Every day is classified on the 18:00 / 01:00 / 08:00 ET session grid:
F1 — Asia manipulates a valid level, London expands
F2 — London manipulates the Asia extreme, NY delivers
F3 — London protracts into a level, NY reverses
F4 — NY sweeps a London extreme; the candle's own close decides reversal vs continuation
P1 / P1B — the continuation profiles (Asia trends; London expands or coils)
P4 / P4B — the aligned day NY reverses, with or without the sweep
Frameworks are verified, not just assigned : a disproven read (London closing against an F1, NY breaking an F2/F3's level) is cleared and the day re-classified, with the audit trail shown. Valid levels come from previous-day extremes, daily swings, daily FVGs, and untaken weekly/monthly levels.
Confirmation Layer
The 210m is the model's confirmation timeframe: NY-phase decisions resolve on completed 210m candles, a 210m sweep-and-reclaim confirms the extreme of day ( LOD Asia✓ ), and cross-asset SMT (auto-paired for index futures, metals, forex, energy, treasuries, crypto) is drawn on the 1H / 210m / 7H mini-panels and stamps +SMT on confirmed extremes. An ADR exhaustion guard stands entries down when the overnight already consumed the day's range.
Entries
Protected-swing entries in the working direction: a CISD or a reversal signature ( RC / EC / IRC ) at its close — but only when a qualifying event ( SMT · FVG · LQ · C2 ) fired first inside the reversed leg. Event first, trigger after. The diamond marks the protected swing: entry at close, stop at the swing, 1R/2R drawn, invalidated the moment the swing is closed through. Default window 09:00–10:30, fully configurable.
Chart Elements
Quarter levels with projections, session shading and dividers, 8–9 AM range, daily FVG zones, floating 1H/210m/7H candle panels with sweep lines and SMT, framework header, and a five-line status readout (pair · bias state · setup grade · framework · ADR fill).
Credits
Concepts by rytrades (Essence Model) and AM Trades (7h profiles), with session-profile reads popularized by Hudson Trades. CISD / protected-swing engine adapted from my own open-source "Universal Po3 Profiler × CIC " (MPL-2.0). Asset pairing via fstarcapital/AssetCorrelationUtils. Published open-source under MPL-2.0.
Educational tool — nothing here is financial advice. Indicator
Indicator
Indicator
Reticle - Structural Reversal GridWhy This Works
Financial markets rarely move in uninterrupted straight lines. Asset prices expand in directional vectors, exhaust themselves, and retrace back toward their origins to trap counter-trend traders before continuing. Reticle is designed to map this structural reality geometrically.
Most traders rely on static, horizontal support and resistance levels. The Reticle engine relies on the mathematical squaring of time and price. By anchoring a vector to a verified structural leg (A to B), the script projects a dynamic diagonal trend floor (the "Death Line") and mathematically subdivides the entire move. Furthermore, historical testing across crypto and legacy markets consistently demonstrates that the 50% to 62.5% retracement band is the highest-probability zone for trend continuation to occur following a structural push.
How This Works
Reticle operates as a dual-engine geometric tracker:
The Anchoring Engine: It auto-detects the dominant macro swing (highest high and lowest low over a specified lookback period) to find the current active leg in the market. It marks the start of the move as Anchor A and the climax as Anchor B.
The Geometry Engine: Once A and B are locked, it draws an 8x8 fractional lattice to subdivide the zone, extends a golden Exhaustion Box highlighting the 50–62.5% retracement levels, and calculates the true geometric "Death Line." The slope of this line dynamically adjusts to the actual ratio of the move, preventing the distortion that usually ruins diagonal trendlines across varying chart scales.
How to Use Reticle
The primary utility of this script is finding high-confluence continuation entries and identifying exact structural invalidation points.
1. Finding Entries in the Exhaustion Zone
Wait for an impulsive move to define Anchors A and B. As the price pulls back from B, watch for it to enter the golden 50–62.5% Exhaustion Box. This is your strike zone. You want to see the price wick into this box and print a strong rejection candle that closes back outside of it. The box dynamically flares red the deeper price pushes into it, visually highlighting peak tension.
2. Managing the Trade via the Death Line
The red diagonal Death Line originating from Anchor A acts as the ultimate structural invalidation. It rises in tandem with time. If the asset respects its market geometry, it should bounce out of the Exhaustion Box and remain on the "safe" side of the Death Line.
3. Trading the Break
If a candle cleanly closes across the Death Line (marked on the chart by a red ✕), the geometric structure of that leg is broken. If you are in a trend-continuation trade, this is your hard exit signal. Conversely, advanced traders can use this Death Line break as an entry trigger to play the structural reversal.
Settings Guide
Every chart and asset breathes differently. Use these settings to perfectly calibrate Reticle to your chosen instrument.
Anchor Mode & MTF
Auto Anchors: Leave this checked to let the script find the A and B swing points automatically. Unchecking it disables the script until you define manual time anchors.
Use Higher Timeframe (MTF) Swings: A powerful feature that allows you to calculate the dominant A→B swing on a macro timeframe (like the Daily) while executing your trades on a lower timeframe (like a 40-minute chart) without losing the structural geometry.
Auto Engine: Choose between "Dominant Swing" (finds the absolute high and low of the lookback window) or "Latest Pivots" (strictly grabs the last two confirmed pivot points).
Dominant Swing Lookback / Pivot Strengths: Adjusts how many bars the script scans to define a swing. Increase these numbers to track massive macro trends; decrease them to trade rapid intraday micro-structures.
Engine Parameters & Squaring
Death Line Slope Basis: Dictates the math behind the red invalidation line.
Auto (A→B Ratio): Recommended. The slope perfectly mirrors the steepness of the structural push.
Squaring Factor: Forces the line to rise by a fixed, absolute price amount per bar, achieving true Gann-style 1x1 squaring.
True Squaring (Price Units per Bar): Active only if "Squaring Factor" is chosen above. Input exactly how many dollars/cents the line should rise per bar (e.g., 100 means a $100 climb per candle).
Death Line Angle ×: Multiplies the final slope. 0.5 acts as a 1x2 support line hugging price action. 1.0 acts as a steep 1x1.
Exhaustion Band Forward Extension: Determines how many bars into the future the golden retracement box is drawn.
Toggle Visuals: Checkboxes to hide or show the Lattice, the Band, the Death Line, and the A→B Vector Spine to keep your chart uncluttered.
Alerts
Select exactly which structural events you want to be notified about. Reticle features a unified alert system that ensures signals are only fired on confirmed candle closes to avoid false wick triggers.
Format Alerts as JSON: Check this box if you are connecting the indicator to automated trading bots via webhooks. It outputs a clean, machine-readable data payload instead of standard text.
Status Table
Show Status Table: Toggles the HUD panel that provides live data readouts regarding the current vector size, slope settings, and the exact percentage distance between current price and the Death Line invalidation.
Position: Move the data panel to any corner of the chart to prevent it from covering active price action. Indicator
HTF Time Markers [twr]HTF Time Markers
This indicator plots higher-timeframe (HTF) period boundaries directly on your current chart, giving you a clean visual reference for where each new HTF candle begins — without needing to switch charts or add a separate HTF overlay.
Key Features
Auto Timeframe Detection — Automatically selects an appropriate HTF based on your current chart resolution (e.g. 5m chart → 15m markers, 1H chart → 4H markers), or set a manual timeframe if you prefer full control.
Two Display Modes
Full Height — draws a vertical line stretching across the entire chart at the start of each new HTF period.
Session Range — draws a live-updating box confined to the actual high/low range of the developing HTF candle, expanding in real time as the period forms.
HTF Open Price Line — Plots a horizontal line at the open price of each HTF candle, independent of the vertical marker settings. Choose how it extends:
Until Next Period — stops automatically where the next HTF candle begins.
Full Right — extends indefinitely into future bars.
Full Chart — extends across the entire chart in both directions.
Useful as a quick reference for whether price is trading above or below the current HTF open — a key reference level in many ICT/SMC frameworks.
Smart Timestamp Labels — Each vertical marker is labeled with contextual text that adapts to the timeframe:
Sub-weekly HTFs show time and weekday (e.g. "09:30 / Monday"), or weekday-only if preferred.
Weekly HTFs show the week-of-month (e.g. "Week 2").
Monthly, Quarterly, and Yearly HTFs show calendar-relative labels (month name, quarter number, or year) instead of a redundant time stamp, since higher-timeframe opens always land on the same weekday/time.
Timezone Control — Labels are calculated using a selectable timezone (default America/New_York), so your markers align with the session times your strategy is actually built around, rather than the raw exchange timezone.
Full Styling Control — Independently adjust color, width, and style (solid, dotted, dashed) for both the vertical markers and the open line, plus label size and a configurable cap on how many historical markers/lines are kept on the chart.
How It Works
The indicator tracks the start of each new HTF bar using request.security and draws a vertical marker at that boundary. In Session Range mode, the box continues updating its top/bottom/right edges on every bar until the HTF period closes, giving you a live read on the developing range. At the same time, an independent open-price line is plotted at the HTF candle's opening price and extended according to your chosen mode. Older markers and lines are automatically pruned once you exceed your configured maximums, keeping the chart uncluttered.
Use Case
Useful for traders who reference higher-timeframe context (e.g. 4H, Daily, Weekly opens) while executing on a lower timeframe, and want both a visual cue for where each HTF candle starts and a persistent open-price reference level — without constantly toggling chart resolutions. Indicator
Top Dog Energy Matrix Trading System// =============================================================================
// TOP DOG ENERGY MATRIX - TABLE GUIDE & METHODOLOGY
// =============================================================================
// Summarizes the Top Dog energies (Barry Burns method) across 5 timeframes at
// once: 1D / 4H / 1H / 15m / 5m. Each ROW is a timeframe and computes its own
// indicators in its own timeframe.
// READ IT: top -> bottom (slow/dominant -> fast/execution)
// left -> right (cycle -> entry signal)
// =============================================================================
//
// -----------------------------------------------------------------------------
// 1. COLUMNS (what each one means)
// -----------------------------------------------------------------------------
// TF Timeframe of the row (1D/4H/1H/15m/5m). Top rules: 1D & 4H set
// the bias, 1H & 15m fine-tune, 5m executes.
//
// Ciclos Cycle count within the trend: "previous / new" (e.g. 5 / 2).
// +1 each time %D crosses the 50 level. Resets to 0 when trend
// flips (15EMA vs 50SMA), saving the prior count.
// 1-2 = early (trade zone). 5-7 = extended (caution, near end).
// Teal bg = %D rising, red = falling.
//
// C.M "Cycle Momentum": live %D value vs 50 + direction (U/D/=).
// e.g. "62 U". Read the trajectory (50->55->60 = rising).
// Blue if %D>50, yellow at 50, red if <50.
//
// Momentum Momentum (MACD/MOM) direction: UP / DOWN / PLANO.
// PLANO = histogram below 70% of its own average.
// UP=teal (bullish), DOWN=red (bearish), PLANO=gray (no energy).
//
// ATR Relative volatility vs its own 50-bar avg: ALTA/NORM/BAJA.
// ALTA(orange)=big candles, more risk+range. BAJA(faint blue)=
// tight market. NORM(gray)=normal.
//
// Vol Volume vs its own 50-bar avg: ALTA/NORM/BAJA (same colors as
// ATR). ALTA=conviction behind the move. BAJA=few participating
// (suspicious, more likely to fail).
//
// Divergencias Stochastic divergence in that TF: direction + strength.
// UP FUERTE (solid lime) = %K AND %D diverge = most reliable.
// UP debil (faint lime) = %K only = early.
// DN debil (faint red) = bearish %K only.
// DN FUERTE (solid red) = bearish %K AND %D.
// "-" (gray) = none. UP=possible bottom, DN=possible top.
//
// Trend/ADX Trend (15EMA vs 50SMA): ALCISTA/BAJISTA + ADX value beside it
// (e.g. "ALCISTA 32"). Teal=bull, red=bear. ADX = STRENGTH only
// (>25 solid, <20 weak/ranging), NOT direction.
//
// Estado Do cycle & momentum of that TF agree?
// ALINEADO(green)=yes, onside. MIXTO(orange)=disagree.
// PLANO(gray)=no momentum.
//
// Gatillo Entry signal - only meaningful on the 5m row.
// ARMADO = hook fired, waiting for the break.
// LONG/SHORT (teal/red) = fired with 15m aligned.
// DEBIL (blue) = fired but 15m not backing it = lower quality.
// "-" = nothing.
//
// -----------------------------------------------------------------------------
// 2. COLORS AT A GLANCE (background tells you the state)
// -----------------------------------------------------------------------------
// Green/Teal bullish / TF aligned / LONG
// Red bearish / SHORT / strong bearish divergence
// Blue C.M %D>50 | Gatillo DEBIL
// Orange ATR/Vol ALTA | Estado MIXTO
// Yellow C.M right at 50 (decision zone)
// Faint gray neutral: NORM / PLANO / no signal
// (ATR and Vol share identical colors: same state = same color.)
//
// -----------------------------------------------------------------------------
// 3. METHODOLOGY (step by step)
// -----------------------------------------------------------------------------
// GOLDEN RULE: the higher timeframe rules. Never trade against 1D/4H just
// because the 5m looks good. This table is a CONFLUENCE MAP - it tells you
// WHETHER to trade, in WHICH direction, and if it's a good MOMENT.
//
// Step 1 BIAS (1D & 4H): read Trend/ADX + Estado. Both ALCISTA/ALINEADO ->
// longs only. Both BAJISTA -> shorts only. Contradicting or ADX<20 ->
// weak bias, wait. Lower TFs do NOT change this direction.
//
// Step 2 NOT LATE? (Ciclos on 1H & 4H): count 1-2 = early = ideal.
// Count 5-7 = extended -> caution, Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Market Clock | Candle & Session Timer
Market Clock — Candle & Session Timer
Market Clock is a multi-timeframe trading clock designed to make market timing easier to see at a glance.
Most candle countdown tools answer a single question: How much time is left in the current candle?
Market Clock expands that idea into a compact timing dashboard. It simultaneously tracks the active chart candle, higher-timeframe candle development, and important market-session events so traders can understand not only how much time remains, but where they currently are within the market's timing structure.
MULTI-TIMEFRAME CANDLE CLOCKS
Market Clock monitors three timing layers simultaneously:
Chart Timeframe — automatically follows the active chart
Higher Timeframe 1 — configurable by the user
Higher Timeframe 2 — configurable by the user
Each active candle displays its remaining time alongside its percentage of completion.
This can be particularly useful for traders who use lower timeframes for execution while relying on higher timeframes for confirmation. Instead of switching charts simply to check when a higher-timeframe candle closes, Market Clock keeps those clocks visible from the current chart.
CANDLE PROGRESS
Time remaining tells only part of the story.
Market Clock also visualizes how far each candle has progressed through its lifespan using a segmented progress meter and percentage reading.
This provides immediate context for questions such as:
Is this higher-timeframe candle just beginning, or is it approaching confirmation?
A setup appearing during the first portion of a candle may carry very different implications from the same setup appearing moments before that candle closes.
As candles approach completion, the progress display changes state to make late-stage candles easier to recognize.
CLOSING WARNING
The final seconds of a candle can be particularly important when waiting for candle-close confirmation.
Market Clock includes a configurable Closing Warning Threshold. When an active candle enters this window, its timer changes state and the dashboard status changes to CLOSING.
This makes approaching closes visible without requiring the trader to continually watch the countdown.
MARKET EVENT COUNTDOWNS
Trading does not occur only according to candle boundaries. Important market-session transitions have their own clocks.
Market Clock currently tracks:
NY Cash Open
Countdown to the 9:30 AM New York equity-market open.
London Close
Countdown to the London session close.
These events appear in a dedicated Next Events section and automatically roll forward to the next trading day.
When an event enters the configurable Event Soon Threshold, Market Clock highlights the approaching event and changes its overall status to EVENT SOON.
DESIGNED FOR MULTI-TIMEFRAME TRADERS
Market Clock can complement many trading styles, but it was designed especially with multi-timeframe analysis in mind.
A trader might, for example, execute from a 5-minute chart while simultaneously monitoring the completion of the 1-hour and 4-hour candles. The lower timeframe provides execution detail while Market Clock keeps the larger timing structure visible.
This can be useful for:
Candle-close confirmation
Breakout and rejection setups
Multi-timeframe confluence
Session-open preparation
Intraday and swing-trading workflows
Traders waiting for higher-timeframe confirmation before execution
CUSTOMIZATION
The dashboard can be adapted to different workflows. Traders can independently control the chart-timeframe clock, two higher-timeframe clocks, progress meters, market-event countdowns, status display, dashboard position, text size, warning thresholds, and other display elements.
This allows Market Clock to function as either a compact candle timer or a more complete multi-timeframe timing dashboard.
DESIGN PHILOSOPHY
Price receives most of a trader's attention, but time is the other axis of every chart.
A candle's meaning develops not only from where price trades, but from how much time remains before that information becomes finalized.
Market Clock was built around that idea.
Instead of asking only:
“Where is price?”
Market Clock adds another question:
“Where are we in time?”
For traders who wait for closes, monitor several timeframes, or structure trades around major session transitions, that context can be just as valuable. Indicator
Indicator
MW WINDOWS TIME🇫🇷 Français
MW WINDOWS TIME est un indicateur PulseWire simple et visuel conçu pour cadrer les principales fenêtres horaires de trading sur MGC et MNQ.
Il affiche automatiquement deux zones directement sur le graphique :
08h45 → 11h00 : fenêtre Europe, priorité MGC
14h15 → 17h30 : fenêtre US, priorité MNQ + MGC
Pendant chaque fenêtre, l’indicateur crée une boîte qui s’adapte automatiquement au plus haut et au plus bas des bougies de la période. À la fin de la fenêtre, la boîte reste figée afin de conserver un repère visuel clair.
Le nom de l’actif à privilégier est affiché sous chaque boîte :
MGC le matin, puis MNQ • MGC l’après-midi.
L’utilisateur peut personnaliser les couleurs, l’opacité, les bordures, la taille du texte et la position des labels.
Le fuseau horaire peut être réglé manuellement entre UTC+2 et UTC+1 afin de s’adapter au passage heure d’été / heure d’hiver.
L’objectif du script est simple : savoir immédiatement quand chercher un setup et éviter de trader en dehors des fenêtres prévues.
🇬🇧 English
MW WINDOWS TIME is a simple and visual PulseWire indicator designed to highlight the main trading windows for MGC and MNQ.
It automatically displays two trading windows directly on the chart:
08:45 → 11:00: European session, priority MGC
14:15 → 17:30: US session, priority MNQ + MGC
During each window, the indicator creates a box that automatically adjusts to the highest and lowest price reached during the session. Once the time window is over, the box remains fixed on the chart for clear historical reference.
The preferred trading instrument is displayed below each box:
MGC during the morning session and MNQ • MGC during the US session.
Users can customize the box colors, opacity, border colors and thickness, text colors, label size, and label position.
The timezone can be manually switched between UTC+2 and UTC+1 to adapt to summer and winter time changes.
The purpose of the script is simple: clearly identify when to look for trading opportunities and avoid trading outside the planned windows. Indicator
Indicator
Indicator
Indicator
Indicator
Satoshi' Clock - Halving, ATH/ATL & Cycle ProjectionsWhat is Satoshi's Clock?
Crypto markets don't move on their own calendar — they move on Bitcoin's. Every major cycle top, every brutal bear market, and every fresh all-time high across the entire crypto market has historically clustered around the same four-year rhythm set by Bitcoin's halving schedule. Satoshi's Clock takes that rhythm and puts it directly on your chart as a set of clean, readable vertical time markers — so instead of guessing "where are we in the cycle?", you can just look.
This isn't a signal generator and it doesn't tell you to buy or sell. It's a context layer: a way to instantly orient yourself in Bitcoin's historical cycle, no matter which chart you happen to have open.
Why it works on any chart, not just BTC
Most cycle tools only make sense on the asset they're calculated from. Satoshi's Clock is built differently — every date it plots is anchored to actual calendar time rather than bar position, so Bitcoin's halving dates, its all-time highs, and its historical cycle tops render correctly whether you're looking at a BTC chart, an ETH chart, or a small-cap altcoin. The theory behind this is simple: if altcoins broadly follow Bitcoin's cycle (which they historically have), then seeing BTC's cycle markers on top of whatever you're actually trading gives you real context that a same-asset-only tool can't.
What's actually on the chart
Confirmed historical facts (solid lines):
Bitcoin's all-time high and all-time low — auto-detected from a reference BTC symbol you can configure, with a manual override switch if you'd rather lock in exact known values yourself
The current chart's own all-time high and low, auto-detected from whatever symbol is open — useful for immediately seeing how far the current asset is from its own extremes
All four confirmed Bitcoin halvings (November 2012, July 2016, May 2020, April 2024)
The three completed cycle peaks and the bear-market bottoms that followed them (2013, 2017, 2021) — these come pre-filled with commonly cited historical dates and prices, but every single one is an editable input if you want to adjust them to match your own research
Forward-looking projections (dashed lines, always marked with "?"):
Estimated ATH and ATL windows for the current cycle, calculated from the last halving and from the actual detected ATH date
Estimated ATH and ATL windows for the next cycle, calculated forward from your configurable next-halving estimate
All projections are shown as date ranges, not single dates, because pretending a "cycle top" can be predicted down to the day is misleading. Every projection uses a min/max day-count input (e.g. "480 to 550 days from halving to ATH") so you see a realistic window instead of false precision
A dedicated projection for whatever symbol you're currently viewing, which blends that asset's own actual ATH timing with Bitcoin's projection window — staying close to Bitcoin's cycle while still reflecting when this specific asset actually peaked
The summary panel
An optional, fully repositionable table lays everything out side by side: confirmed dates and day-counts on the left, projected ranges on the right. Every projected figure carries a visible "?" so there's never any ambiguity about what's a historical fact versus a rough forward estimate.
How to actually use this
Use it to answer questions like: How long has it been since the last halving? Are we early, mid, or late in the historical pattern relative to past cycles? How far along is this altcoin's own cycle compared to Bitcoin's? It's built for context and orientation, not entries and exits. Combine it with your own technical analysis, on-chain research, and risk management — treat the projection windows as "here's what's happened before," not "here's what will happen."
A note on the projections
Every forward-looking estimate on this chart is built from a sample size of exactly three completed halving cycles. That is not a large enough sample to draw statistical conclusions from, and this script does not claim otherwise. The ranges are historical pattern references, explicitly and repeatedly marked as estimates throughout the script, and should never be treated as financial advice or a prediction of future price action.
Fully configurable:
BTC reference symbol used for auto-detection
Manual override toggle + price/date inputs for any ATH or ATL (BTC or current symbol)
All halving dates and the next-halving estimate
All three historical cycle peak/bottom dates and prices
Min/max day-count ranges for both the halving→ATH and ATH→ATL projection stages
Full color customization for every line category
Summary panel position (9 placement options) and visibility toggles for every individual element Indicator
Indicator
Indicator
Indicator
Indicator
