AG Pro Pin Bar Quality Filter [AGPro Series]AG Pro Pin Bar Quality Filter
Overview / What it does
AG Pro Pin Bar Quality Filter is a price-action overlay built to detect pin bar candles and then separate higher-quality rejection candles from weaker or noisier ones.
The script does not treat every long-wick candle as equally meaningful. Instead, it evaluates the internal candle structure first, then applies a compact quality framework around volume, recent momentum, and local support/resistance context. The result is a filtered pin bar workflow designed for traders who want cleaner chart annotation rather than a raw pattern dump.
This tool focuses on one specific job: identifying rejection candles with a measurable structure and presenting them with a readable quality label directly on the chart. It is intended to help users inspect potential reaction points, not to replace broader market context or execution rules.
The visual design is intentionally simple at the core: pin bar body highlighting, wick emphasis, directional markers, and compact quality labels. This makes the script suitable for traders who want candle-based context without converting the chart into a full market-structure dashboard.
Unique Edge
The distinctive feature of this script is that it does not stop at pattern detection.
A standard pin bar script often marks candles only because they have a long wick. This script goes further by checking whether the wick is large enough relative to the body, whether the body itself is small enough relative to the full candle range, and whether one wick clearly dominates the other. That combination helps reduce ambiguous candles that visually resemble pin bars but do not express clean rejection.
After the structural test, the script applies a three-part quality model:
- volume confirmation
- momentum context
- support/resistance proximity
This creates a practical quality hierarchy rather than a binary pattern label. In other words, the script is not only asking “Is this a pin bar?” but also “How much contextual support does this pin bar have?”
An optional piercing check is also available for users who want stricter validation. This adds another layer of selectivity by requiring the candle body to show stronger positional behavior relative to the prior bar.
Methodology
The script starts by measuring the current candle:
- candle body size
- full candle range
- upper wick length
- lower wick length
- dominant wick versus body ratio
A raw pin bar candidate requires:
- a minimum wick/body ratio
- a maximum body percentage of full range
- directional wick dominance
This helps define whether the candle is a legitimate bullish or bearish rejection structure.
Bullish pin logic is based on lower-wick dominance.
Bearish pin logic is based on upper-wick dominance.
Once a raw pin bar is detected, the script evaluates three contextual filters.
1) Volume filter
The current volume can be compared against a moving average of volume. This helps identify candles that form with relatively stronger participation.
2) Momentum confirmation
The script can check whether recent candles were moving in the opposite direction of the current pin bar. For example, a bullish pin bar becomes more meaningful when it forms after short-term downward pressure, while a bearish pin bar becomes more meaningful after short-term upward pressure.
3) Support / resistance proximity
The script tracks pivot-based reference levels and checks whether the pin bar forms close to a recent local support or resistance area, using an ATR-based distance threshold.
Each passed filter contributes to the final quality score. This produces a compact tiered output instead of a single undifferentiated signal stream.
Signals & Alerts
The script can identify:
- bullish pin bars
- bearish pin bars
- higher-quality pin bars based on the selected minimum score
Visual elements may include:
- body highlighting on detected pin bars
- wick emphasis
- directional arrow markers
- quality labels with contextual details
- an information panel summarizing the active state
The quality label can display the signal tier and relevant confirmations such as:
- wick/body ratio
- volume confirmation
- momentum confirmation
- support/resistance proximity
Alert conditions are available for:
- bullish pin bars
- bearish pin bars
- prime-quality pin bars
- any valid pin bar that meets the selected score threshold
This allows users to align alerts with their own strictness settings rather than monitoring every possible candle manually.
Key Inputs
Important user controls include:
- minimum wick/body ratio
- maximum body percentage of full range
- wick dominance threshold
- optional piercing requirement
- volume filter enable/disable
- momentum filter enable/disable
- support/resistance filter enable/disable
- minimum quality score
- label size
- panel display
- maximum number of displayed signals
These settings make the script adaptable across different instruments and chart styles. Users who prefer a broader scan can lower the strictness, while users who want fewer but cleaner signals can raise the thresholds.
Limitations & Transparency
This script is a rule-based candle-quality filter. It is not a market prediction engine, and it does not attempt to classify broader trend structure, liquidity behavior, or macro regime by itself.
A pin bar can still fail even when all filters pass. A visually strong rejection candle is not automatically a durable reversal. Context such as higher-timeframe structure, trend state, volatility regime, session behavior, and instrument-specific character still matters.
Support and resistance detection in this script is pivot-based and proximity-based. It is designed as a practical contextual filter, not as a complete structural mapping model.
Volume behavior also varies by asset and market type. On some instruments, especially where centralized volume data is limited or interpreted differently, the volume filter should be treated as a supplementary input rather than a universal truth test.
The momentum check is intentionally compact and local. It is meant to improve candle context, not to replace broader directional analysis.
For these reasons, the script is best used as a chart-reading assistant within a larger process, not as a standalone decision framework.
Risk Disclosure
This script is provided for technical analysis and chart annotation purposes only.
It highlights selected pin bar conditions based on user-defined structural and contextual rules. It does not provide financial advice, investment advice, or guaranteed trade outcomes. Markets can remain irrational, trend continuation can invalidate rejection candles, and false positives can occur in all timeframes and asset classes.
Users should validate the script on their own instruments, timeframes, and risk models before relying on it in live conditions. Position sizing, stop placement, execution discipline, and overall trade management remain the responsibility of the user.
In summary, AG Pro Pin Bar Quality Filter is designed to help traders study rejection candles with more structure, more selectivity, and cleaner on-chart presentation than a basic pin bar marker, while remaining transparent about what the script does and does not do.
Indicator
AG Pro Engulfing Candle Quality [AGPro Series]AG Pro Engulfing Candle Quality
Overview / What it does
AG Pro Engulfing Candle Quality is a price action overlay designed to detect bullish and bearish engulfing candles and then grade them through a structured quality framework instead of treating every engulfing event as equally important.
Rather than marking all engulfing candles with the same visual weight, this script evaluates whether the candle shows characteristics that may make the event more meaningful in context. The goal is to reduce low-value pattern noise and help the user focus on engulfing candles that display stronger internal structure and better surrounding conditions.
The script can color qualifying candles, display score labels directly on the chart, add optional background emphasis, and summarize recent signal state through an information panel. This makes it suitable for traders who want a cleaner way to review engulfing behavior without turning the chart into a generic pattern map.
In practical use, the script is not intended to predict direction on its own. It is designed as a filtering and chart-reading aid for users who already work with structure, liquidity, support/resistance, trend context, or discretionary execution rules.
Unique Edge
Many engulfing tools stop at pattern detection. This script takes a different approach by treating engulfing candles as a quality event rather than a binary event.
Its core difference is the scoring model. Each qualifying candle is evaluated through a multi-factor framework that can include relative volume behavior, body-to-range efficiency, prior directional context, engulf strength, and optional support/resistance proximity. This creates a 1-10 quality score that helps separate weaker engulfing events from stronger ones.
The result is a more selective workflow:
- detect the pattern,
- evaluate the candle quality,
- display only the events that meet the user’s threshold,
- and keep the chart focused on higher-interest formations.
This makes the script different from simple engulfing markers, basic candlestick libraries, or broad pattern collections. Its purpose is not to label everything. Its purpose is to rank and filter.
Methodology
The script identifies bullish and bearish engulfing conditions using configurable detection logic. Users can choose a stricter close-based interpretation or a broader wick-based interpretation depending on how selective they want the pattern engine to be.
Once an engulfing candle is detected, the script evaluates the event with a weighted quality framework. The conceptual components include:
1. Relative volume
The candle is compared against a moving average of volume. A candle that forms with stronger-than-normal participation can receive a higher quality contribution than one forming on ordinary or weak activity.
2. Body efficiency
The candle body is evaluated relative to the full range. A larger, more decisive body may indicate stronger commitment than a candle with excessive wick noise and a relatively small real body.
3. Prior directional context
The script reviews recent directional pressure over a user-defined lookback window. This helps distinguish engulfing candles that appear after a more meaningful opposing move from those that form in flatter or less informative conditions.
4. Engulf strength
The script can incorporate how convincingly the current candle overtakes the prior candle structure, adding another layer beyond simple pattern recognition.
5. Optional support/resistance proximity
Users can enable an additional contextual bonus when the engulfing event forms near pivot-derived support or resistance areas.
These components are normalized into a score from 1 to 10. The score is then used for chart display, filtering, and alerts. This means the script is not simply asking whether an engulfing candle exists. It is asking whether the engulfing candle appears to have enough internal and contextual quality to deserve attention.
Signals & Alerts
The script can display:
- bullish engulfing events,
- bearish engulfing events,
- candle coloring for qualified signals,
- optional score labels,
- optional background highlights,
- and a chart panel summarizing recent signal state.
Alerts are deterministic and based on confirmed rule conditions inside the script. Users can create alerts for:
- bullish engulfing events,
- bearish engulfing events,
- high-quality bullish engulfing events,
- high-quality bearish engulfing events,
- or any engulfing event that meets the selected minimum score threshold.
As with any chart tool, users should understand that alerts reflect the script’s rules, not an outcome guarantee. An alert means the selected condition has been satisfied according to the methodology. It does not imply that the next market move will be favorable.
Key Inputs
The script includes several controls so users can adapt the tool to different symbols and timeframes.
Important inputs include:
- minimum score required for display,
- label cooldown to reduce visual clustering,
- trend-strength lookback,
- strict close-based or broader wick-based engulf logic,
- bullish and bearish visibility toggles,
- optional support/resistance bonus,
- support/resistance pivot length,
- ATR-based proximity setting,
- scoring weights for volume, body efficiency, trend context, and engulf strength,
- volume average threshold,
- body/range threshold,
- color controls for bullish, bearish, and score states,
- label size,
- background highlight toggle,
- candle-coloring toggle,
- score label visibility,
- panel visibility, position, font size, and theme,
- and minimum score required for alerts.
These inputs allow the user to keep the script conservative and selective, or make it more permissive when reviewing more active charts.
Limitations & Transparency
This script is a rule-based visual analysis tool. It does not know future price action, and it does not confirm trade quality on its own.
Several points are important:
- An engulfing candle is still a local pattern. It can fail, especially in noisy or low-liquidity environments.
- Strong scores do not guarantee continuation or reversal.
- The support/resistance context is approximate and derived from pivot logic, not from a universal market map.
- Volume behavior can vary across markets and data feeds.
- Different timeframes can produce very different signal density and quality distribution.
- The script is designed for confirmation and filtering, not for fully automated decision-making.
Users should treat the score as a structured quality estimate, not as a promise. In many workflows, the script is most useful when combined with broader context such as market structure, trend bias, higher-timeframe levels, session behavior, or risk management rules.
Risk Disclosure
This script is provided for chart analysis and educational use. It is not financial advice, not an execution system, and not a guarantee of performance.
All trading and investing involve risk. Market conditions can change quickly, and any pattern, score, or alert can fail. Users are responsible for their own analysis, entries, exits, and risk controls.
Use the script as a decision-support tool, not as a substitute for judgment.
Indicator
AG Pro ICT Confluence Score Dashboard [AGPro Series]AG Pro ICT Confluence Score Dashboard
Overview / What it does
AG Pro ICT Confluence Score Dashboard is a panel-first decision support tool built to evaluate whether multiple ICT-style conditions are aligning at the same time. Instead of focusing on a single event in isolation, the script converts several contextual factors into a structured confluence model so traders can quickly assess whether the current environment is weak, building, or high-conviction.
The dashboard tracks a stack of evidence that includes sweep activity, imbalance interaction, block retests, structure shifts, premium/discount location, trap context, session context, higher-timeframe alignment, freshness, and conflict. Those components are summarized into core and effective scores, then translated into a clean bias/state panel. An optional chart layer can display signal tags and a lightweight halo only when stronger threshold conditions are met.
This script is designed for traders who prefer structured context over isolated triggers. It does not attempt to replace discretion, and it is not presented as a one-click signal engine. Its purpose is to help users evaluate whether multiple factors are working together in the same direction, or whether the current picture is mixed and should be treated more cautiously.
What makes the script practical is that it reduces chart-reading friction. A trader can still inspect sweeps, gaps, blocks, structure, and location manually, but the dashboard helps organize that information into a readable hierarchy. This makes it easier to separate random activity from environments where several pieces of evidence are beginning to align.
Unique Edge
The distinctive feature of this script is not that it detects one ICT concept better than every other tool. Its edge comes from treating multiple ICT-style events as parts of a single evidence framework. The dashboard does not simply list conditions; it scores them, weighs context, and highlights whether the active side remains clean or is facing meaningful opposition.
That means the script is less about finding a single pattern and more about measuring alignment quality. A sweep without supportive structure is different from a sweep followed by structure, location support, and a fresh contextual trigger. A gap touch inside a neutral area is different from a gap touch that appears inside a stronger directional stack. By organizing these relationships into a dashboard, the script gives the user a more structured read on what is happening now.
This also separates it from single-purpose tools. AG Pro ICT Confluence Score Dashboard is not a standalone liquidity sweep script, not a standalone FVG script, not a standalone order block script, and not a standalone session indicator. It is a meta-layer built to evaluate whether several pieces of market evidence are converging into a more coherent setup environment.
Methodology
The model begins with a set of factor states derived from recent chart structure. Confirmed pivot swings are used to define recent highs and lows. From there, the engine evaluates conditions such as sweep events, structure breaks, imbalance zones, block interaction, premium/discount location, and trap-style sequences. Each factor can become active for a limited validity window instead of remaining relevant indefinitely.
The script then builds a core score for bullish and bearish context separately. Session logic can add a directional bonus when the active side is aligned with the configured session window. After that, contextual adjustments are applied through higher-timeframe alignment, freshness, and conflict logic. This produces an effective score that attempts to reflect not only how many factors are present, but whether they are present in a cleaner and more supportive sequence.
The dashboard then translates that information into a readable structure: Bull/Bear core values, effective score, net bias, score bar, conflict read, Why Now summary, Sequence summary, and factor-by-factor status rows. The idea is to help the user see both the headline state and the underlying reasons behind it.
Signals & Alerts
The optional chart signals are intentionally restrained. They are meant to mark stronger score states rather than call every minor condition. Signal tags can appear when the configured score threshold is reached, and the visual layer can be limited so the chart stays readable.
Available alert logic is based on state transitions rather than promotional claims. The script can notify when bullish or bearish confluence crosses the configured threshold, when high confluence is entered, and when that state is lost. This keeps the alert structure deterministic and easier to interpret in a workflow.
Key Inputs
Swing Length controls the pivot sensitivity used by the structure engine.
Factor Validity Window defines how long a detected event can continue to contribute to the stack.
Trap Confirmation Window controls how tightly sweep and structure events must cluster to qualify as trap context.
Freshness Window helps determine whether the active side is still recent enough to deserve extra weight.
Conflict Penalty Threshold defines when opposing evidence becomes meaningful enough to reduce the active side.
Alert Threshold sets the effective score level required for stronger signal conditions.
HTF Timeframe and HTF EMA Length define the higher-timeframe directional filter.
Session controls allow users to enable or disable London, New York, and Asia windows.
Dashboard and visual controls manage panel position, theme, text size, signal tags, and halo behavior.
Limitations & Transparency
This script is a context model, not a prediction model. A high score does not guarantee continuation or reversal, and a low score does not mean price cannot move aggressively. The dashboard only summarizes the relationship between the conditions it measures.
Some components rely on confirmed pivot logic. Because pivot confirmation needs bars on both sides, certain structure-related states become available only after that confirmation exists. This is a design choice intended to keep the model structured, but it also means some events are inherently delayed relative to raw price movement.
The script is also selective by design. It does not attempt to represent every possible ICT interpretation, and it does not replace chart reading, risk control, or execution planning. Users should treat it as a decision-support framework that helps organize evidence, not as a substitute for a full trading process.
Risk Disclosure
This indicator is provided for educational and informational purposes only. It does not constitute financial advice, investment advice, or a solicitation to buy or sell any financial instrument. Trading involves risk, and users should rely on their own analysis, risk management, and judgment before making decisions. Indicator
AG Pro Inducement & Trap Quality [AGPro Series]AG Pro Inducement & Trap Quality
OVERVIEW / WHAT IT DOES
AG Pro Inducement & Trap Quality is an overlay tool built to map short-lived trap behavior around smaller inducement levels rather than broad market structure alone. The script focuses on moments where price appears to invite participation through a nearby internal level, briefly pushes beyond that level, and then reclaims it quickly enough to suggest failed continuation pressure.
In practical terms, this tool is designed to highlight a very specific type of behavior: local liquidity engineering around minor swing references. Instead of treating every sweep as equally meaningful, it evaluates whether the move shows the characteristics of a more deliberate trap sequence. This helps separate routine noise from cleaner rejection events that may deserve closer attention.
The script identifies compact inducement references, monitors whether those levels are exceeded, and then evaluates the quality of the reclaim using a rules-based scoring model. The output is intentionally visual and compact: trap labels, score readouts, engineered-liquidity context, and a lightweight status panel that keeps the chart readable while still surfacing the most important state information.
This is not a broad “smart money everything” overlay, and it is not a general market-structure engine. Its role is narrower and more specific: to help users study micro trap behavior around inducement levels with a structured, visual framework.
UNIQUE EDGE
Many trap-style overlays simply mark local sweeps or label wick rejections without distinguishing between low-quality noise and more organized rejection behavior. This script takes a narrower path.
Its core distinction is that it is built around inducement-first logic. The process begins with smaller internal swing references that may function as local liquidity magnets. From there, the script evaluates whether price briefly runs that level and reclaims it with enough quality to qualify as a more meaningful trap event.
This makes the script materially different from tools that primarily map:
- full structure breaks,
- broad liquidity sweeps across larger swing highs and lows,
- order blocks or fair value gaps,
- or generic reversal candles.
The objective here is not to classify the whole market. The objective is to organize one specific event class: short-lived inducement failure and trap quality around internal levels.
METHODOLOGY
1) Inducement level detection
The script scans for smaller swing references that can function as local inducement levels. These are not intended to replace major support or resistance logic. They serve as nearby internal references around which short-term trap behavior may form.
2) Sweep and reclaim logic
After an inducement level is identified, the script monitors whether price briefly trades beyond that level. A trap candidate is only considered when the move fails to sustain beyond the level and price reclaims the reference within a limited confirmation window.
3) Quality model
Each trap candidate is scored using a rules-based quality framework. The score is not arbitrary. It is derived from components such as:
- reclaim speed,
- relative volume behavior,
- wick proportion,
- and overshoot control.
The purpose of the score is not prediction. It is prioritization. A higher score suggests that the rejection characteristics were cleaner according to the script’s internal rules.
4) Engineered liquidity context
When inducement logic becomes active, the script can visualize engineered-liquidity context so users can see where price is interacting with a recently relevant internal level. This is meant to improve readability and sequencing, not to imply certainty.
5) Visual decluttering and presentation controls
To keep the overlay usable, the script includes compact labeling, importance filtering, label spacing controls, and a small status panel. These features are presentation tools designed to reduce clutter without changing the underlying trap logic.
SIGNALS & ALERTS
The script can visualize bull and bear trap events after inducement-level interaction and reclaim confirmation.
Typical readouts include:
- TRAP labels,
- quality score values,
- inducement / engineered-liquidity context,
- and panel status information such as recent trap state and current watch state.
Alert conditions are designed around deterministic script events rather than discretionary interpretation. As with any alert-based study, users should confirm how they want to use those events inside their own workflow before relying on them in live conditions.
KEY INPUTS
Important controls typically include:
- inducement swing sensitivity,
- confirmation window / reclaim timing,
- volume and wick weighting inputs,
- overshoot tolerance,
- compact label display,
- importance filtering,
- panel visibility and position,
- and vertical label offset controls.
These settings allow the user to decide whether they want broader coverage or a stricter, more selective readout.
HOW THIS DIFFERS FROM OTHER AG PRO TOOLS
This script is intentionally specialized.
It is not a BOS / CHoCH engine and does not attempt to label full structural transitions.
It is not an order block tool and does not frame the chart through block logic.
It is not a fair value gap map and does not organize imbalance zones as its primary lens.
It is not a broad liquidity sweep tool built around larger external swing raids.
Instead, this script concentrates on micro inducement behavior: smaller internal references, brief level violations, fast reclaim structure, and the relative quality of the resulting trap.
That narrower scope is the point. The script is designed to help users study one recurring behavior class in a more disciplined and readable way.
LIMITATIONS & TRANSPARENCY
This script is a visual and analytical aid. It does not know intent, news context, execution conditions, or participant positioning.
A trap label does not guarantee reversal.
A higher quality score does not guarantee continuation.
A low-quality score does not mean the area is irrelevant.
Internal inducement levels can vary in significance depending on volatility regime, instrument behavior, and timeframe selection.
Like any rules-based overlay, this script is sensitive to parameter choices. More permissive settings may surface more events but also more noise. Stricter settings may improve selectivity while naturally reducing signal frequency.
Users should also understand that inducement and trap concepts are interpretive by nature. This script translates those ideas into a deterministic ruleset for chart study. That conversion is useful, but it is still a model.
RISK DISCLOSURE
This script is for chart analysis and educational use. It is not financial advice, not a trade signal service, and not a promise of outcome.
All trading and investing involve risk. Market conditions can change quickly, and no indicator or overlay can eliminate uncertainty. Users should evaluate signals in context, apply their own risk management, and avoid treating any single chart tool as a complete decision system.
WHAT THIS SCRIPT IS NOT
To make the scope clear, this script is not:
- a guaranteed reversal detector,
- a one-click trade system,
- a full market-structure replacement,
- or a standalone execution model.
It is a focused overlay for studying inducement-driven trap behavior with a cleaner visual framework.
NOTES
Best use cases typically come from combining this script with context that the user already trusts, such as trend structure, higher-timeframe location, or broader execution rules. The tool is intended to improve organization and observation around inducement and trap sequences, not to replace judgment.
If you prefer a cleaner chart, use the compact display and importance filter settings. If you prefer a more exploratory workflow, relax the filter and study how the scoring reacts across different conditions.
Indicator
AG Pro Premium Discount Zone Engine [AGPro Series]AG Pro Premium Discount Zone Engine
Overview / What it does
AG Pro Premium Discount Zone Engine is a dealing-range and retracement context overlay built to map relative value inside a selected swing. Instead of treating price as a sequence of isolated candles, the script frames current price location against an active high-low range and highlights where price is trading relative to equilibrium, premium, discount, and the OTE area.
The core purpose of this tool is organizational. It is designed to help traders read where price is positioned inside a live swing and how price reacts when it moves into higher-value or lower-value retracement zones. This is especially useful when a chart is moving inside a pullback, when trend continuation is being evaluated, or when users want to distinguish between shallow retracements and deeper repricing within an existing range.
The script supports multiple ways to define the active range. Users can work with an automatically detected swing, a higher-timeframe dealing range, or a manual-lite anchor mode based on bar offsets. Once a valid range is identified, the script projects premium and discount territory, marks the 50% equilibrium, and highlights the OTE area using the 61.8, 70.5, and 78.6 retracement levels.
The output is intentionally visual, structured, and restrained. Premium and discount zones are shown as clean value blocks. The OTE area is treated as the main focus zone rather than a minor detail. The panel summarizes the active bias, current location, zone state, equilibrium level, and OTE boundaries so that users can read the chart quickly without relying on aggressive signal language.
Unique Edge
What makes this script different is that it is not built as a market-structure detector, imbalance mapper, liquidity event scanner, or order-block locator. Its job is narrower and more specific: it organizes relative price location inside a defined dealing range.
That distinction matters. Many overlays attempt to explain everything on the chart at once. This script does not. It does not try to label breaks of structure, detect fair value gaps, mark liquidity sweeps, or classify institutional zones. Instead, it answers a more focused question: where is price trading inside the current swing, and how is it behaving as it enters or leaves important retracement territory?
This also separates the script from other AG Pro tools. Some AG Pro overlays are built around structure transitions, some around imbalance behavior, some around reaction quality, and some around event detection. AG Pro Premium Discount Zone Engine is built around valuation context. It does not compete with those tools directly. It complements them by adding a relative-value map around a selected range.
Another difference is the zone-state logic. The script does not stop at drawing premium and discount blocks. It also tracks how price interacts with the OTE area and classifies that interaction using a simple state model such as Fresh, First tap, Retested, Rejected, Accepted, and Invalidated. This creates a more contextual read than a static retracement overlay.
Methodology
The script begins by identifying an active swing range. In Auto Swing mode, it uses pivot-based range detection. In HTF Swing mode, it builds the range from a higher-timeframe high-low window. In Manual-Lite Swing mode, it uses bar-offset anchors to let the user define a practical swing reference without requiring manual drawing tools.
Once the active range is available, the script calculates the internal value map:
- Swing High
- Swing Low
- 50% Equilibrium
- Premium territory above equilibrium
- Discount territory below equilibrium
- OTE zone using 61.8, 70.5, and 78.6 retracement levels
The script then monitors how price behaves around those levels. This produces context states rather than directional promises. For example, price entering the OTE area is not treated the same as price rejecting from it, accepting beyond it, or invalidating the active range. These are intentionally different events because they describe different chart conditions.
The equilibrium level is included as a centerline reference, while the OTE band is given stronger visual emphasis. This helps distinguish broad valuation territory from the narrower retracement pocket that many users monitor more closely.
Signals & Alerts
The signals in this script are event-based and deterministic. They are not designed as standalone trade instructions. They are designed to describe interaction with the active range.
Available event logic includes:
- OTE Test
- OTE Reject
- OTE Accept
- Discount Reaction
- Premium Rejection
- Equilibrium Cross
- Range Invalidated
- OTE Failure
These events are intended to provide chart context. For example, an OTE Test simply means price entered the active OTE zone. A Premium Rejection means price traded into the premium side and closed back below the local premium threshold used by the script. A Discount Reaction means price interacted with the discount side and responded upward under the script's rules. These are context events, not guarantees of continuation.
Alerts follow the same philosophy. They are defined in a rules-based way so users can monitor range interaction without needing to watch the chart continuously. The alert layer is most useful when the script is used as a location filter inside a broader workflow.
Key Inputs
Swing mode
Lets the user choose between Auto Swing, HTF Swing, and Manual-Lite Swing depending on whether the goal is reactive automation, higher-timeframe framing, or a more controlled local range definition.
Auto pivot length
Controls how sensitive the pivot-based swing detection is in Auto mode.
HTF timeframe and HTF lookback
Used to define the broader dealing range in higher-timeframe mode.
Manual high bars back / manual low bars back
Used to create a manual-lite range by referencing earlier bars as anchors.
Render bars back / render bars forward
Controls how far the active range projection extends on the chart.
Zone opacity and theme
Used to refine the visual balance between premium, discount, and OTE areas.
Label controls
Used to reduce visual noise by controlling label cooldown, label render window, and maximum visible labels.
Panel controls
Allow the user to reposition the panel and adjust its text size to fit different chart layouts.
Limitations & Transparency
This script does not predict direction. It does not forecast reversals. It does not decide whether a chart should trend, break, or fail. It maps relative value inside a selected range and reports interaction events inside that framework.
The quality of the output depends on the quality of the active swing. If the selected or detected range is not meaningful for the user's workflow, the valuation map will also be less meaningful. This is especially important in highly compressed, extremely noisy, or structurally unclear conditions.
Auto Swing mode is practical, but like any automated swing model, it depends on pivot confirmation and may update as newer pivots become available. HTF mode provides broader context but may feel less reactive on smaller charts. Manual-Lite mode gives more control but still depends on the user choosing sensible anchor distances.
OTE logic is range-relative. It does not incorporate unrelated concepts such as order blocks, liquidity pools, fair value gaps, session models, or external structure classifications unless the user combines those ideas manually in a separate workflow.
This script is best understood as a valuation-context overlay. It is not a complete strategy, not a full decision engine, and not a substitute for risk management.
How this differs from other AG Pro scripts
AG Pro Premium Discount Zone Engine is intentionally not a structure-break tool, not a CHoCH/BOS detector, not a liquidity sweep scanner, not an FVG engine, and not an order-block mapper.
Its role inside the AG Pro family is to answer a different question:
Where is price trading inside the active dealing range, and what is the quality of its interaction with that value map?
That makes it particularly useful for users who already understand direction from another process and want cleaner execution context. In other words, some tools focus on structural change, some focus on imbalance, and some focus on reaction events. This one focuses on valuation location.
Risk Disclosure
This script is for chart analysis and educational use only. It does not provide financial advice, investment advice, or guaranteed trade signals. Any use of this tool should be combined with independent analysis, risk controls, position management, and market-specific judgment.
The presence of an alert, label, premium zone, discount zone, or OTE interaction does not imply that price must react in a specific way. Markets can continue, reverse, compress, or invalidate a range without warning. Users should treat this script as a context tool, not as a promise of outcome.
Indicator
AG Pro BOS & CHoCH Auto Detector [AGPro Series]AG Pro BOS & CHoCH Auto Detector
OVERVIEW / WHAT IT DOES
AG Pro BOS & CHoCH Auto Detector is a market structure overlay designed to organize swing-based price action into a more readable workflow. Instead of leaving the chart covered with disconnected pivot labels or generic break markers, this script tracks structural swing progression, identifies when prior highs or lows are broken, and classifies those breaks as either BOS (Break of Structure) or CHoCH (Change of Character). The goal is not to predict the next move, but to help traders read whether price is continuing an existing structure or beginning to challenge it.
The script monitors HH, HL, LH, and LL development using pivot logic, then uses those reference points to detect structural breaks. A break in the direction of the active structure is treated as BOS, while the first meaningful break against the prior directional structure is treated as CHoCH. This distinction matters because many charts show every break in the same visual language, even though continuation and character shift do not carry the same analytical meaning. Here, those events are separated clearly.
A second layer of usefulness comes from presentation discipline. This script is built to keep structural information visible without turning the chart into a wall of labels. Swing density can be reduced, major structures can be emphasized, and the higher timeframe overlay can remain active in the background to keep local execution aligned with broader structure. The result is a structure map that stays informative without becoming visually noisy.
This tool is intended for traders who already use price structure as part of their chart reading and want a cleaner way to monitor continuation versus transition. It can support discretionary workflows around trend continuation, pullback analysis, structure failure, and higher timeframe context, while still remaining transparent about how its signals are formed.
UNIQUE EDGE
Many market structure tools stop at plotting swing points or printing BOS / CHoCH text when a level is crossed. AG Pro BOS & CHoCH Auto Detector is built around a more organized structure engine approach.
Its edge is not based on trying to forecast direction or force trade entries. Its edge is based on classification, hierarchy, and chart readability:
- It separates continuation breaks from character-change breaks instead of treating all structural violations as equivalent.
- It preserves the swing chain context behind each event, so BOS and CHoCH are not isolated labels detached from surrounding structure.
- It allows confirmation mode selection, so the user can decide whether structure breaks require close confirmation or can react to intrabar violations.
- It includes higher timeframe structure context directly on the chart rather than forcing the user to reconstruct that context manually.
- It includes swing-density controls so the visual output can be kept clean even when structure is active.
This makes the script less like a simple labeling utility and more like a workflow layer for structure-based chart reading.
METHODOLOGY
1) Swing Structure Detection
The script uses pivot-based highs and lows to identify structural reference points. Those pivots are then classified into HH, HL, LH, and LL sequences, allowing the chart to reflect whether structure is strengthening, weakening, or transitioning.
2) BOS Logic
When price breaks a prior structural level in the direction of the active trend, the event is labeled as BOS. In practical terms, this represents structural continuation rather than directional reversal.
3) CHoCH Logic
When price breaks against the previously established directional structure, the event is labeled as CHoCH. This is treated as a possible character shift, not as a guaranteed reversal. It highlights that the prior structure has been challenged.
4) Confirmation Mode
Users can choose whether structure breaks are confirmed by candle close or by intrabar price action. Close mode is more conservative and can reduce noise. Intrabar mode is more responsive and may show earlier breaks.
5) Higher Timeframe Overlay
An optional MTF layer allows the script to bring higher timeframe structure context onto the active chart. This can help users avoid reading local swings in isolation when broader structure is still dominant.
6) Visual Hierarchy
The script uses horizontal structure levels, event labels, optional arrows, controlled swing density, and a compact information panel to keep key structure events readable. The design priority is to preserve analytical clarity.
SIGNALS & ALERTS
This script can generate structure-based alerts for the following event types:
- Bullish BOS
- Bearish BOS
- Bullish CHoCH
- Bearish CHoCH
- Any structure break
These alerts are event-driven and tied to the script's structural logic. They are intended to notify the user when a relevant break occurs according to the selected confirmation mode. They are not trade instructions and should be interpreted within the user's broader process.
KEY INPUTS
Swing Pivot Length
Controls pivot sensitivity. Lower values detect swings faster but may produce more noise. Higher values are more selective.
Confirmation Mode
Choose between Close and Intrabar logic for structure break confirmation.
Max Structures to Show
Limits how many structural events remain plotted on the chart.
Swing Label Density
Lets users choose between fuller swing annotation and a cleaner major-structure view.
Max Swing Labels on Chart
Helps prevent excessive label build-up in active market conditions.
Enable MTF Overlay
Adds higher timeframe structure context to the active chart.
MTF Timeframe
Defines which higher timeframe structure layer is projected onto the chart.
Label Size / Panel Font Size / Line Settings
Allow visual tuning without changing structural logic.
LIMITATIONS & TRANSPARENCY
This script uses pivot-based structure logic. That means swing points are confirmed only after the required pivot bars are completed. Because of this, the tool is confirmation-based by design and does not attempt to label unfinished pivots as confirmed structure.
BOS and CHoCH are structural events, not certainty statements. A CHoCH may signal that the prior directional structure is being challenged, but it does not guarantee a lasting reversal. Likewise, a BOS indicates continuation within the script's structural framework, but not guaranteed follow-through.
The higher timeframe overlay is designed to add context, not to replace direct higher timeframe chart review. Users should still interpret local and higher timeframe structure together rather than relying on a single signal state.
This script is best used as a structure-mapping tool within a broader analytical framework. It is not a standalone trading system, not a predictor, and not a substitute for risk management.
RISK DISCLOSURE
This indicator is for chart analysis and educational use. It does not provide financial advice, does not guarantee outcomes, and should not be treated as a complete trading methodology on its own. Market structure tools can help organize price action, but all trading decisions remain the responsibility of the user.
Indicator
AG Pro Order Block Reaction Quality [AGPro Series]AG Pro Order Block Reaction Quality
OVERVIEW / WHAT IT DOES
AG Pro Order Block Reaction Quality is an overlay tool designed to organize how price interacts with displacement-origin order block zones. The script identifies the last opposite candle before a strong impulsive move, projects that candle as a bullish or bearish order block, and then tracks whether price later respects, reacts to, or invalidates that zone.
The goal is not to treat every order block as equally important. Instead, the script focuses on reaction quality. When price revisits a tracked zone, the script evaluates the behavior around that revisit and converts the response into a structured quality score. This helps separate zones that produce cleaner reactions from zones that fail, weaken, or transition into breaker behavior.
The indicator is built as a chart-organization tool, not as a prediction engine. It is intended to help users study where impulsive moves originated, how later revisits behaved, and whether those revisits showed clean rejection, weak response, or invalidation. In that sense, the script is less about drawing boxes and more about mapping reaction structure around previously important displacement areas.
Because order block concepts are often displayed in a highly subjective way, this script uses deterministic conditions to reduce ambiguity. Impulse detection, order block selection, reaction-window scoring, and breaker conversion all follow rules-based logic. The objective is to make price interaction around those zones easier to inspect, compare, and review across different market conditions.
UNIQUE EDGE
Many order block tools focus mainly on detection. They draw a bullish or bearish block, then leave the interpretation to the user. This script adds an evaluation layer on top of that detection process. Rather than only asking where an order block exists, it also asks how convincingly price reacted when that zone was revisited.
That difference matters. Two zones may look similar at first glance, but the quality of the revisit can be very different. One revisit may reject cleanly and preserve the zone, while another may penetrate deeply, stall, or fully invalidate. By assigning reaction scores and grade-style labels, the script helps organize those differences visually.
The script also distinguishes active order blocks from breaker behavior. If a previously tracked zone is invalidated, the visualization shifts from standard order block context into breaker context. This adds structural continuity to the chart and helps users see when an old reaction area has lost its original character.
In practical use, the unique edge is the combination of three layers: impulsive-origin zone detection, revisit-based reaction scoring, and breaker-state continuity. Together, those layers aim to give traders a cleaner framework for studying order block behavior than a simple box-drawing approach.
METHODOLOGY
1) Impulse detection
The script first searches for strong directional candles whose range is large relative to ATR and whose move exceeds a recent breakout threshold. This is used as a rules-based approximation of displacement or impulsive participation.
2) Order block definition
Once an impulsive move is detected, the script searches backward for the last opposite candle inside a configurable lookback window. That candle becomes the source order block. Depending on settings, the zone can be projected using the full candle range or the candle body only.
3) Zone persistence and revisit tracking
After a zone is created, the script tracks whether price later trades back into it. That first interaction is important because it provides the data needed to evaluate how the revisit behaved.
4) Reaction quality scoring
When price revisits the zone, the script measures the behavior inside a reaction window. The score is based on factors such as entry precision into the zone, the magnitude of rejection away from the zone, structural integrity of the zone during the test, and the strength of the originating impulse. Those components are combined into a normalized score.
5) Grade translation
The raw score is then translated into a visual grade tier. This is meant to improve chart readability and allow faster comparison between zones that produced stronger versus weaker reactions.
6) Breaker conversion
If price invalidates a zone after it has been engaged, the script can treat that structure as a breaker block. This keeps prior structural context on the chart instead of simply removing it.
7) Visual organization
Bullish zones, bearish zones, and breaker structures are displayed with separate color families so users can distinguish standard order block context from post-invalidation context more quickly.
SIGNALS & ALERTS
The script includes alerts for newly detected bullish and bearish order blocks. These alerts are event-based and are intended to mark when a new candidate zone has been identified according to the script’s internal impulse and source-candle rules.
In addition, the visual state of the chart provides three broad categories of information:
- Active bullish or bearish order blocks that remain structurally valid.
- Breaker blocks that represent previously tracked zones after invalidation.
- Quality-scored reactions that help compare the strength of revisits.
These states should be interpreted as structural context, not as standalone trade instructions. A bullish order block on the chart does not guarantee a long setup, and a bearish order block does not guarantee a short setup. The script is designed to help users study reaction behavior around important zones, not to replace execution rules, risk management, or broader market context.
KEY INPUTS
ATR Length
Controls the volatility baseline used in impulse sizing and reaction calculations.
Impulse Size (x ATR)
Defines how large a move must be, relative to ATR, before it is treated as an impulsive displacement event.
OB Search Bars Back
Controls how far back the script looks for the last opposite candle that becomes the source order block.
Zone Mode
Lets the user choose whether zones are based on the full candle range or the candle body only.
Max Zones Tracked
Limits how many zones remain in memory and on the chart.
Zone Max Age (Bars)
Removes older zones after a defined number of bars so the chart does not grow indefinitely cluttered.
Reaction Window (Bars)
Defines the number of bars used to evaluate how price behaves after a zone is revisited.
Zone Extend (Bars)
Controls how far zones project into the future for chart visualization.
Show 50% Midline
Displays an internal midpoint inside the zone for users who want an additional internal reference.
Show Impulse Markers
Shows or hides impulse-origin markers on the chart.
Label Size
Controls the size of chart labels.
Panel Theme / Panel Font Size / Panel Position
These settings control the visual appearance and placement of the information panel.
LIMITATIONS & TRANSPARENCY
Order block analysis is inherently interpretive, and any script that formalizes it must impose strict rules. That means the script’s logic is intentionally selective. It will not match every discretionary order block definition used by every trader.
The script uses a specific rules-based approximation of impulse, source candle selection, revisit handling, and reaction scoring. As a result, some zones that a discretionary analyst might manually highlight will not appear, while some zones shown by the script may not align with every subjective framework.
Reaction quality is also dependent on the configured reaction window and the selected volatility context. Changing settings can change how aggressive or conservative the script becomes. For that reason, the indicator should be treated as a structured analytical model rather than an objective statement of market truth.
Breaker behavior shown by the script reflects the script’s invalidation logic only. It does not imply that a breaker block will necessarily act as support or resistance in the future. It simply preserves structural history after the original order block state is lost.
This indicator does not use volume profile, order flow, DOM data, or external market microstructure feeds. All calculations are derived from chart data available inside Pine Script.
RISK DISCLOSURE
This script is for chart analysis, research, and educational use. It does not provide financial advice, investment recommendations, or guaranteed outcomes.
No indicator can reliably predict future price movement on its own. Order block reactions may fail, clean-looking zones may break, and high scores do not ensure continuation or reversal. Market context, liquidity conditions, volatility regime, timeframe selection, and execution quality all matter.
Users should test settings carefully, apply independent judgment, and use appropriate risk management. This script should be treated as a decision-support tool for studying price interaction around displacement-origin zones, not as a standalone trading system.
Indicator
AG Pro Fair Value Gap Engine [AGPro Series]AG Pro Fair Value Gap Engine
OVERVIEW / WHAT IT DOES
AG Pro Fair Value Gap Engine is a rules-based overlay built to detect 3-bar fair value gap structures and organize them as a living imbalance map on the chart.
The script identifies bullish fair value gaps when the current low is above the high from two bars earlier, and bearish fair value gaps when the current high is below the low from two bars earlier. Once detected, each zone is stored, rendered, tracked through time, and updated as price interacts with it.
Instead of stopping at basic FVG detection, this script continues to follow the structure after creation. It monitors whether the gap remains active, whether price returns into it, whether mitigation occurs, how old the structure has become, and how strong or weak that mitigation event appears relative to the gap itself.
The result is not just a visual list of imbalances. It is an FVG lifecycle model designed to help traders distinguish between fresh gaps, aging gaps, mitigated gaps, and higher-quality mitigation events.
UNIQUE EDGE
Many fair value gap tools simply highlight every detected gap and leave the user to interpret the rest.
This script is built around a different idea:
not all FVGs deserve the same attention, and not every mitigation event carries the same informational value.
AG Pro Fair Value Gap Engine separates itself by combining detection, aging, prioritization, mitigation tracking, and scoring in a single structured workflow. Gaps are not treated as static rectangles. They are treated as evolving chart objects with a lifecycle.
Within the AG Pro Series, this script is also distinct from breakout-quality, reclaim, rotation, pressure, or acceptance-style overlays. Those models focus on trend behavior, reclaim behavior, structural confirmation, momentum pressure, or price acceptance around a reference. This one is centered on imbalance structure itself: where the 3-bar gap formed, how long it stayed relevant, whether price returned, and how credible that mitigation looked once interaction happened.
In practical terms, the script is designed to answer questions such as:
Which FVGs are still active?
Which ones are becoming stale?
Which mitigation events happened with better quality?
Which visible zones are worth keeping in focus, and which are just legacy context?
That is the core difference. This is not a generic FVG highlighter. It is an imbalance-ranking and mitigation-quality engine.
METHODOLOGY
1) Detection Logic
The script scans for standard 3-bar fair value gap structures.
Bullish FVG:
current low > high from two bars back
Bearish FVG:
current high < low from two bars back
A minimum size filter relative to ATR is applied so that very small gaps can be ignored when desired.
2) Structure Tracking
After detection, each FVG is stored and tracked over time. The script keeps the zone on the chart, extends active zones forward when enabled, and updates their visual state as the market evolves.
This allows the chart to preserve the structural memory of imbalance zones instead of treating every new gap as an isolated event.
3) Aging and Visual Decay
Older gaps gradually lose visual priority through fade logic. This helps newer or more relevant structures stay readable while old zones move into the background.
Optional controls can also suppress distant legacy zones when they become both old and far from current price.
4) Mitigation Logic
The script monitors how deeply price returns into each gap. When the user-defined mitigation threshold is reached, the FVG is marked as mitigated.
Mitigated zones can remain visible as context or be hidden for a cleaner chart, depending on preference.
5) Quality Scoring
Mitigation is not treated as a simple yes/no event. The script evaluates mitigation quality using a weighted model that includes:
- Gap size relative to ATR
- Speed of return into the zone
- Relative volume during the mitigation event
- Return strength after contact with the gap
This produces a normalized score intended to help separate weaker fills from stronger, better-formed mitigation behavior.
6) Focus and Prioritization
To reduce chart noise, the script includes focused labeling, active-zone prioritization, top-zone filtering, and legacy suppression logic.
This means the visual output can be tuned away from “show everything” and toward “show what matters most.”
SIGNALS & ALERTS
This script provides alert conditions for:
- Newly detected bullish fair value gaps
- Newly detected bearish fair value gaps
- Bullish fair value gaps reaching mitigation
- Bearish fair value gaps reaching mitigation
These alerts are event-based and rules-based. They are not forecasts, predictions, or trade instructions.
The labels and panel are designed to summarize state, not to replace the user’s broader market process.
KEY INPUTS
Core Settings
- Minimum FVG Size (ATR)
- Mitigation Threshold (%)
- Maximum Tracked FVG Count
- Age Fade Length
- Extend Active FVG Boxes
Scoring Engine
- Speed Score Reference
- Volume Score SMA Length
- Volume Score Max Ratio
- Size Score Max ATR
Visual Settings
- Show FVG Labels
- Focused Label Mode
- Focused Label Minimum Score
- Active / Mitigated Label Age Limits
- Highlight Score Threshold
- Theme Preset
- Show Mitigated Zones
- Show Mitigated Zone Labels
- Label Horizontal Offset
- Hide Distant Legacy FVGs
- Legacy Hide Age
- Legacy Hide Distance
- Show Only Top Active Zones
- Top Active Zones Count
- Label Stack Spacing
Panel Settings
- Show Panel
- Panel Position
- Panel Font Size
These controls allow the same logic to be used in a more information-dense mode or in a much cleaner presentation mode, depending on the charting style of the user.
LIMITATIONS & TRANSPARENCY
This script detects and organizes 3-bar imbalance structures. It does not claim to identify every meaningful liquidity event, order-flow shift, or broader smart money context factor on its own.
A fair value gap can remain open for a long time, fail quickly, or be revisited multiple times. A high score does not guarantee a directional outcome. A low score does not automatically invalidate the zone as context.
The mitigation score is a structured ranking model, not an objective truth about future price behavior. It is designed to help compare events inside the framework of this script.
Because chart structure, volatility, timeframe, and instrument behavior vary, users should expect different FVG densities and different score distributions across markets.
This tool is best used as a market-organization layer for imbalance analysis, not as a standalone execution system.
RISK DISCLOSURE
AG Pro Fair Value Gap Engine is an analytical charting tool for educational and informational use.
It does not provide financial advice, does not promise outcomes, and should not be interpreted as a standalone buy or sell system. Fair value gaps, mitigation events, and score readings should be evaluated together with market structure, volatility, timeframe context, liquidity conditions, and the user’s own risk framework.
Trading involves risk. Past chart behavior does not guarantee future results.
Indicator
Indicator
AG Pro Pivot Cluster Survival Map [AGPro Series]AG Pro Pivot Cluster Survival Map
Overview / What it does
AG Pro Pivot Cluster Survival Map is an overlay tool that evaluates the durability of nearby pivot clusters rather than focusing on a single pivot reaction. The script groups Daily, Weekly, and Monthly Classic Pivot levels when they compress into the same price neighborhood, then measures how well that cluster has held up under repeated interaction.
The goal is not to label every pivot touch as strong or weak. The goal is to show whether a pivot-derived zone has continued to absorb pressure, remain structurally relevant, or lose stability over time. This makes the script suitable for users who want to monitor confluence-based pivot structure instead of isolated one-bar reactions.
The visual model is intentionally compact. The script highlights the nearest upper cluster and the nearest lower cluster, assigns a survival score to each side, and displays a pressure readout for the dominant active zone. The result is a map of pivot-cluster durability, not a generic support/resistance overlay and not a simple reaction detector.
Unique Edge
The distinguishing feature of this script is its focus on pivot-cluster survival.
Many pivot tools concentrate on one level at a time. Many reaction tools classify the immediate response after a touch, reclaim, or rejection. This script approaches the problem differently. It asks whether multiple pivot levels from different higher timeframes are compressing into the same zone, and whether that zone is still surviving repeated market interaction.
That difference matters.
This script does not score a single bounce. It does not try to predict a reversal from one isolated pivot event. It evaluates whether a pivot cluster remains durable after tests, inside-zone pressure, breaches, and time spent without structural failure.
Within the AG Pro catalog, this script is materially different from AG Pro Pivot Points Reaction Map. Pivot Points Reaction Map is centered on reaction quality at pivot levels. Pivot Cluster Survival Map is centered on cluster durability, confluence density, and survival under pressure. In other words, one evaluates the response; the other evaluates the staying power of the pivot cluster itself.
It is also different from broader level-survival or support/resistance tools because the source engine here is explicitly pivot-derived. The script is built around Daily, Weekly, and Monthly Classic Pivot families, then transformed into a confluence-survival framework.
Methodology
The current version uses Classic Pivot calculations from higher timeframes.
1. Daily, Weekly, and Monthly pivot levels are collected.
2. Nearby pivot levels are grouped into clusters when they fall within the active cluster width.
3. The script selects the nearest upper cluster and the nearest lower cluster relative to current price.
4. Each selected cluster is evaluated with a survival model.
The survival model is based on factors such as:
- cluster density
- higher-timeframe participation
- repeated tests
- rejection behavior
- inside-zone pressure
- breach frequency
- time since structural failure
A higher survival score suggests that the cluster has remained more durable under recent interaction. A higher pressure reading suggests that the cluster is experiencing more structural stress.
The chart display is intentionally selective. Instead of plotting every pivot line independently, the script concentrates on the nearest relevant clusters and presents them as zones with a backbone line and state label. This is designed to keep the structure readable.
States / Signals
The script uses state-based interpretation rather than directional promises.
Typical state classifications include:
- Stable
- Strengthening
- Balanced
- Under Stress
- Fragile
- Failed
These states are derived from the relationship between survival and pressure. They are meant to describe the condition of the cluster, not to issue a guaranteed trading outcome.
The panel summarizes:
- nearest upper cluster
- nearest lower cluster
- dominant survival side
- cluster pressure
- pivot mix currently included in the model
The script can also generate alert conditions for:
- cluster strengthening
- cluster failure
- cluster reclaim behavior
These alerts are deterministic conditions derived from the script logic. They are informational and should be interpreted within a broader market workflow.
Key Inputs
Pivot Formula
This version is intentionally limited to Classic Pivots in order to keep the clustering and scoring model consistent.
Include Daily / Weekly / Monthly
These settings control which higher-timeframe pivot families are included in the cluster engine.
Cluster ATR Width
Controls how aggressively nearby pivot levels are merged into the same cluster using ATR-based spacing.
Cluster Percent Width
Adds a percentage-based width floor so clusters remain practical across different price scales.
Minimum Levels Per Cluster
Controls how many pivot levels are required before a true cluster is recognized.
Survival Lookback
Defines the observation window used for the durability calculations.
Visual Controls
The script includes settings for cluster visibility, labels, backbone lines, panel location, and font sizes.
Limitations & Transparency
This script is a structural reading tool. It is not a prediction engine.
A high survival score does not guarantee that price will reverse, hold, or trend from that area. A low survival score does not guarantee immediate failure. The values should be read as condition metrics for pivot-derived zones.
Because the script groups pivot levels into clusters, output can vary depending on volatility, symbol characteristics, and timeframe context. On some symbols, one side may show a stronger cluster than the other. On some charts, one side may temporarily rely on a weaker fallback anchor when cluster density is limited.
This script does not attempt to replace market structure analysis, higher-timeframe context, liquidity analysis, or risk management. It is intended to organize pivot confluence into a readable survival framework.
What this script is not:
- not a buy/sell signal engine
- not a guarantee of support or resistance
- not a standalone trade system
- not a future-price prediction model
Risk Disclosure
This script is for chart analysis and decision support only. It does not provide financial, investment, or trading advice. Markets can move unpredictably, and no indicator can eliminate risk.
Users should evaluate signals, states, and cluster conditions together with their own process, timeframe alignment, and risk controls before making any decision.
Indicator
AG Pro Support Resistance Reaction Map [AGPro Series]AG Pro Support Resistance Reaction Map
Overview / What it does
This indicator maps horizontal support and resistance zones from confirmed price structure, then evaluates how price reacts when it returns to those zones. Instead of treating every level touch as equally important, the script focuses on whether the interaction looks constructive, weak, or potentially broken.
The core objective is to make structural reactions easier to read on-chart. Confirmed pivot highs and lows are converted into zones, nearby levels are merged, older levels can expire, and the chart prioritizes the most relevant active zones on each side of price. When price re-enters a zone, the script grades the reaction and can display labels such as Clean Hold, Sharp Reject, Soft Bounce, or Break Confirmed.
This publication is designed as an indicator, not as an execution engine. It does not place trades, predict future returns, or guarantee that a level will hold. Its purpose is to help traders organize structural context and evaluate reaction quality in a more systematic way.
Unique Edge
Support and resistance is a classic concept, so the difference here is not the concept itself but the workflow built around it.
This script is not a generic auto-drawing tool that tries to plot every possible line. It is a reaction map. The emphasis is on how price behaves inside a structural zone, not on covering the chart with as many levels as possible.
The script differs from tools that are primarily centered on pivot formulas, breakout-retest grading, moving-average reclaim logic, or channel structure. Here, the focus is horizontal structural memory and the quality of the live interaction with that memory. In practice, that means the script is trying to answer questions such as:
- Is this support still reacting constructively?
- Is this resistance rejecting cleanly or absorbing pressure?
- Is the latest touch just noise, or is it a more meaningful retest?
- Which nearby intact levels still deserve attention right now?
Another important distinction is the panel logic. The compact panel does not attempt to summarize all historical levels. It highlights the nearest intact support below price and the nearest intact resistance above price, along with their state, raw versus qualified touch count, and the latest recorded reaction.
Methodology
1) Structural level detection
Confirmed pivot highs and lows are used to create horizontal support and resistance zones. The script waits for confirmation rather than guessing unfinished pivots.
2) Zone construction
Each level is converted into a zone using an ATR-based width. This keeps the plotted area adaptable instead of forcing the same fixed width on all markets and all volatility environments.
3) Merge logic
Nearby levels of the same type can be merged when they fall within the selected merge distance. This helps reduce duplication and keeps the map cleaner.
4) Age and visibility control
Older levels can expire, broken levels can be hidden or faded, and the script visually prioritizes the nearest intact zones. This is intended to improve readability rather than preserve every historical level forever.
5) Reaction scoring
When price newly enters a live zone, the script evaluates the interaction using factors such as penetration depth, close location inside or outside the zone, candle body bias, impulse, and whether the touch is the first qualified retest. The result is translated into a reaction label and a quality score.
6) Touch accounting
The script tracks both Raw and Qualified touches. Raw touches represent zone entries. Qualified touches are stricter and require a fresh entry plus cooldown spacing, which helps avoid counting clustered bars as repeated independent retests.
Signals & Alerts
The script can generate labels and alerts around the most important structural interactions.
Main reaction labels:
- Clean Hold
- Sharp Reject
- Soft Bounce
- Break Confirmed
- Failure Risk
Main alert conditions:
- Bullish Level Reaction
- Bearish Level Reaction
- Level Break Confirmed
These labels and alerts are descriptive, not predictive. They summarize the current structural interaction detected by the script. They are not trade instructions and should not be interpreted as a promise of continuation or reversal.
Key Inputs
Levels
- Pivot Strength
- Maximum Active Levels
- Zone Width (ATR Multiplier)
- Merge Distance (ATR Multiplier)
- Level Expiry (bars)
Reaction Engine
- Retest Cooldown (bars)
- First-Touch Bonus
- Keep Broken Levels Visible
Visuals
- Show Reaction Labels
- Show Compact Panel
- Visible Zones Per Side
- Emphasize Nearest Levels
- Show Soft Bounce Labels
- Minimum Label Score
- Minimum Bars Between Side Labels
- Label Stagger (bars)
- Broken Level Fade
- Base Zone Opacity
- Label Offset (ATR)
- Label Size
- Panel Text Size
Panel
- Panel Location
- Panel Theme (Dark / Light)
Limitations & Transparency
- Pivot-based levels are confirmed after the selected pivot strength completes, so the script is intentionally reactive rather than anticipatory.
- Zone width is ATR-based, which means the visual footprint of levels will change with volatility.
- Raw and Qualified touch counts are intentionally different. Qualified touches are filtered by entry logic and cooldown, so they will usually be lower than raw counts.
- The compact panel is selective. It shows the nearest intact support and the nearest intact resistance, not a full inventory of every level on the chart.
- Visibility controls are designed to keep the chart readable. As a result, some valid but lower-priority levels may be de-emphasized or hidden from the main view.
- Support and resistance remains interpretive by nature. No horizontal level works in isolation across all symbols, timeframes, or market regimes.
Risk Disclosure
This indicator is a chart-analysis tool. It is not a broker, a signal service, or an automated trading system. It does not provide investment advice and it does not guarantee that any level will hold, reject, or break in a particular way.
All markets involve risk. Price can invalidate a structural zone quickly, especially during news events, regime shifts, or low-liquidity conditions. Use the script as one part of a broader decision process that includes market context, liquidity conditions, timeframe alignment, and risk management.
Indicator
AG Pro Pivot Points Reaction Map [AGPro Series]AG Pro Pivot Points Reaction Map
Overview / What it does
AG Pro Pivot Points Reaction Map is an overlay indicator designed to analyze how price behaves around classical pivot levels rather than only plotting those levels as static horizontal references. The script builds Daily or Weekly pivot structures from prior period OHLC data and then tracks the currently active pivot in order to highlight nearby price interaction, reaction quality, and short-term context.
Instead of treating every pivot line equally at all times, the script uses an active-pivot framework. This allows the chart to stay focused on the level that is currently most relevant to price while still keeping broader pivot structure visible in the background. The goal is to help traders evaluate whether price is reacting constructively, rejecting, reclaiming, compressing, or losing a key pivot area.
The visual design is intentionally split into two layers. The first layer is the classical pivot structure itself, including PP, R1, S1, and optional extended levels such as R2 and S2. The second layer is the reaction map built around the active pivot. This layer adds an ATR-based reaction zone, state detection, filtered event labeling, active context tags, and an information panel so the chart can communicate more than a simple “price above” or “price below” condition.
This indicator is intended for chart analysis, workflow support, and structured market reading. It does not attempt to predict future prices, and it should not be interpreted as a standalone trade execution system. It is best used as a contextual overlay that helps organize price behavior around widely followed pivot references.
Unique Edge
The core distinction of this script is that it is not just another pivot plotting tool. Classical pivot indicators usually stop at drawing levels. This script continues one step further by evaluating reaction behavior around the currently active level.
Its main differentiator is the active reaction framework. The script identifies a current pivot focus, builds a dynamic reaction zone around that level, and then classifies price interaction into states such as reclaim, loss, holding behavior, rejection behavior, and compression near pivot. This moves the indicator away from passive level display and toward structured price-context mapping.
A second differentiator is the sticky active pivot logic. Instead of shifting focus too aggressively whenever price becomes marginally closer to a different level, the script attempts to keep chart attention anchored to the current active pivot until conditions justify a transition. This improves visual continuity and makes the chart easier to read during multi-bar interaction.
A third differentiator is signal hygiene. Reaction labels can be filtered through cooldown logic, score thresholds, and event selection rules so that the chart remains readable. Major events can be emphasized while weaker or more repetitive reactions remain in the background. This helps preserve interpretability instead of overwhelming the screen with every minor touch.
Finally, the script combines chart-side cues with a compact state panel. The panel reports the active pivot, pivot price, current distance, live state, last score, and directional bias. This allows users to scan the present context without losing the full visual relationship on the chart.
Methodology
The pivot engine uses prior Daily or Weekly OHLC values to construct standard pivot levels. These levels form the structural base of the indicator. Depending on settings, the script can display the central pivot point together with first and second resistance/support layers.
From that structure, the script evaluates which pivot is currently most relevant to price and assigns that level as the active pivot. A sticky selection process is then used so the active focus does not rotate too easily on minor fluctuations. This helps the script behave more like a context map and less like a constantly flickering nearest-line tracker.
Around the active pivot, the script builds a reaction zone using ATR. This means the mapped zone adapts to the instrument’s recent volatility rather than using a fixed absolute distance. A wider volatility environment naturally leads to a wider interaction zone, while a calmer environment keeps the zone tighter.
Inside that zone, the script studies price behavior using a combination of position relative to the pivot, candle body structure, wick emphasis, and short-term displacement from the level. It also computes a reaction score designed to quantify how constructive or decisive the interaction appears under the script’s logic. Stronger reclaim or rejection characteristics can therefore stand out from weaker, noisier touches.
The result is a layered read of market structure:
- classical pivot references define the environment,
- the active pivot identifies current relevance,
- the ATR-based zone frames the interaction area,
- event logic classifies notable reactions,
- the panel summarizes the current state.
Signals & Alerts
The script can identify and label several reaction types around the active pivot. Depending on settings and score thresholds, these may include reclaim events, pivot loss events, reaction holding behavior, and reaction rejection behavior.
In addition to chart labeling, the script includes alert conditions for major workflow events. These are designed to notify the user when price is showing a notable interaction around the active pivot. Available alert categories include bullish reaction confirmation, bearish reaction confirmation, pivot loss confirmation, compression near pivot, and active pivot changes.
Because this is a contextual indicator rather than a complete strategy, alerts should be interpreted as informational events. They are intended to help users monitor evolving price behavior around important pivot areas, not to replace independent analysis, execution rules, or risk management.
Key Inputs
Pivot Anchor
Selects whether the pivot structure is built from Daily or Weekly source data.
Show R2 / S2
Allows the extended pivot structure to remain visible for users who want broader context beyond PP, R1, and S1.
Base Pivot Line Width / Active Pivot Line Width
Controls the visual hierarchy between background pivot references and the currently active pivot.
Reaction Zone (ATR Multiplier)
Defines the width of the active reaction zone relative to recent volatility.
Wick Emphasis
Adjusts how strongly wick behavior contributes to reaction interpretation.
Signal Cooldown (Bars)
Prevents labels and events from clustering too tightly during noisy price interaction.
Show Reaction Labels / Label Mode / Minimum Label Score
Controls which reaction labels appear on the chart and how selective the script should be.
Focus Mode
Adjusts how aggressively non-active pivot lines fade into the background.
Reaction Label Size
Changes the chart label size for reaction events and edge tags.
Show Event Markers / Show Active Pivot Halo / Show Right Edge Active Tag
Controls optional visual layers that can make the active structure easier to follow.
Passive Context Tags
Adds simplified right-edge tags for passive pivot references so faded background levels remain interpretable.
Show Info Panel / Panel Position / Panel Theme / Panel Font Size
Configures the summary panel to match user preference and chart layout.
Limitations & Transparency
This script is based on classical pivot concepts and volatility-adjusted reaction mapping. It does not know future price direction, and it does not forecast whether any pivot will hold or fail before price interacts with that area.
Reaction labels and scores are formula-driven representations of the script’s internal logic. They are not objective truth statements about market intent, and they should not be interpreted as guaranteed support, guaranteed resistance, or guaranteed continuation/reversal behavior.
Like all level-based overlays, the script can produce different impressions depending on the selected timeframe, instrument volatility, and chart conditions. Fast-moving instruments, low-liquidity environments, and sudden news-driven candles may reduce the practical value of any fixed structural framework, including pivots.
The active pivot model is intentionally selective. That improves chart focus, but it also means the script emphasizes one current pivot context over other simultaneously visible levels. Users who want a broader or more aggressive level-tracking style may prefer different settings than the default configuration.
The indicator is also not a backtesting engine and does not provide complete entry, exit, stop, or position sizing logic. It should therefore be used as one analytical component within a broader decision process.
Risk Disclosure
This indicator is for analytical and educational use only. It does not provide investment advice, trading advice, or financial advice.
Markets involve risk. Price can move through pivot levels without respecting them, reaction quality can deteriorate quickly, and conditions that appear constructive on one bar can fail on the next. No indicator can remove uncertainty from live markets.
Users should evaluate this script together with their own market framework, timeframe selection, execution process, and risk controls. Decisions involving capital should never rely on a single indicator, label, panel reading, or alert event in isolation. Indicator
AG Pro Donchian Breakout Quality [AGPro Series]AG Pro Donchian Breakout Quality
Overview / What it does
AG Pro Donchian Breakout Quality is an overlay indicator built around a simple but practical question: not every Donchian breakout carries the same informational quality, so how can that difference be visualized directly on the chart? Instead of treating every channel escape as equally meaningful, this script evaluates the structure of the breakout bar, the local channel condition, and the immediate follow-through context, then converts that information into a readable breakout quality framework. The goal is not to predict the future or to classify markets with certainty. The goal is to help the user separate cleaner breakouts from weaker ones inside a familiar Donchian channel structure.
The indicator plots the Donchian upper band, lower band, optional midline, and channel fill, then adds a quality layer on top of the raw channel logic. When price closes through the previous Donchian boundary, the script evaluates the event and assigns a score. That score is then mapped to a simple grade scale so the breakout can be read quickly without losing access to the underlying channel context. This creates a workflow that remains visually intuitive for users who already understand Donchian channels, while adding a more structured interpretation layer for breakout review.
A second focus of the script is post-breakout behavior. In practice, many breakouts are not decided by the break itself, but by what price does after the first expansion bar. For that reason, the indicator tracks an active breakout level, projects a retest zone around that level using ATR, and monitors whether price can hold that area. This makes the tool useful not only for identifying fresh breaks, but also for observing whether the market is accepting or rejecting the newly crossed boundary.
The visual design is intentionally chart-first. The channel remains the primary frame, while breakout labels, retest markers, level tags, the setup tag, and the compact state panel provide context without turning the script into a crowded dashboard. Historical label clutter is reduced by default, and the script is designed so the most recent relevant structure remains readable on active charts.
Unique Edge
The distinctive feature of this script is that it does not stop at “price broke the channel.” Traditional Donchian usage often leaves the interpretation step entirely to the user. This script keeps the Donchian framework intact, but adds an explicit breakout quality model. That means the script is not merely showing an upper-band break or lower-band break; it is also evaluating how that break occurred.
The quality model scores breakouts using multiple components rather than a single threshold. It considers breakout distance relative to ATR, breakout candle body participation, wick behavior, local channel compression, midline slope context, and optional volume confirmation. This matters because many weak breakouts can look similar to stronger ones at first glance, especially when the user is reviewing charts quickly. By ranking the event instead of only flagging it, the indicator introduces a more disciplined read on the same familiar Donchian concept.
Another differentiator is the breakout-to-retest workflow. The script identifies the breakout, stores the active level, builds a retest zone around that level, and then tracks hold behavior within a limited life window. This makes the indicator less about a one-bar event and more about the structural sequence that often matters in live chart reading: approach, break, test, hold, or fail. That sequence is especially helpful for users who do not want a Donchian tool to act like a simple channel overlay with occasional arrows.
The presentation layer is also part of the edge. Active-side emphasis, breakout shelf visualization, level tagging, a right-side setup tag, state detection, and selective event marking are included to help the chart communicate context more clearly. The script is therefore positioned as a Donchian breakout interpretation tool, not as a generic channel plotter.
Methodology
The script starts with a standard Donchian channel calculation using the selected lookback length. The highest high defines the upper boundary, the lowest low defines the lower boundary, and the midpoint between them forms the optional midline. A breakout is detected when the current close moves beyond the previous upper boundary for a bullish event, or beyond the previous lower boundary for a bearish event.
Once a breakout is detected, the script calculates a quality score. The score is built from multiple normalized components. Breakout distance measures how far the close extends beyond the prior Donchian boundary relative to ATR. Candle body participation rewards bars where the real body contributes meaningfully to the range. Wick behavior penalizes less efficient breakout bars. Midline slope acts as a directional context proxy. Channel compression evaluates whether the breakout is emerging from a relatively tighter local structure. Volume, when enabled, adds an additional confirmation layer by comparing current volume to a moving average baseline.
These components are weighted and combined into a single breakout quality score. The result is then translated into a grade scale: A+, A, B, C, or D. This grade is not a claim about trade outcome, and it is not a guarantee of continuation. It is a structured description of breakout quality according to the internal model used by the script.
After the breakout, the indicator records the active breakout level and projects a retest zone around it using ATR-based half-width logic. This active zone remains visible for a user-defined number of bars. During that window, the script monitors whether price revisits the zone and holds it according to the directional logic. When a valid hold occurs, the script can mark that event on the chart. If price invalidates the zone, the active state is cleared.
The panel summarizes the current state and the most recent breakout evaluation. Depending on chart context, the script can display conditions such as Long Breakout, Short Breakout, active retest states, watch states, or Neutral. It also reports the latest breakout score, grade, channel width relative to ATR, and the current volume ratio when volume confirmation is enabled.
Signals & Alerts
The script includes deterministic alert conditions tied to specific structural events rather than vague descriptive states.
Long Breakout
Triggered when price closes above the previous upper Donchian boundary.
Short Breakout
Triggered when price closes below the previous lower Donchian boundary.
Long Retest Hold
Triggered when a bullish breakout remains active and price revisits the retest zone without losing the active breakout level according to the script’s hold logic.
Short Retest Hold
Triggered when a bearish breakout remains active and price revisits the retest zone without reclaiming the active breakout level according to the script’s hold logic.
These alerts are event-based and intended to describe what the script detects on the chart. They are not trade instructions, and they should not be interpreted as a complete execution plan on their own.
Key Inputs
Donchian Length
Controls the lookback used for the channel boundaries.
ATR Length
Used in the quality model and for retest zone construction.
Midline Slope Lookback
Defines how the script measures midline slope for directional context.
Use Volume Confirmation / Volume SMA Length
Enables or disables the volume component and sets the averaging baseline.
Break Distance Full-Score ATR
Defines how far beyond the channel price must extend to receive a full distance score.
Channel Width Full-Penalty ATR
Controls how channel width contributes to the compression component.
Watch Threshold
Helps identify when price is approaching the upper or lower channel region.
Retest Zone Life / Retest Half-Width ATR
Sets how long the active retest zone remains valid and how wide it is.
Minimum Score For Breakout Labels
Helps reduce noise by showing breakout labels only above the chosen threshold.
Label and Panel Controls
Allow adjustment of label visibility, historical label behavior, label size, label shift, panel position, and panel font size.
Visual Style Controls
Enable or disable edge glow, breakout level tags, right-side setup tag, breakout shelf, and event candle tint.
Limitations & Transparency
This indicator is an analytical overlay, not a strategy, not an execution engine, and not a backtest report. It does not place orders, size positions, manage risk, or estimate expected return. A high breakout score does not mean price must continue, and a low breakout score does not mean reversal is guaranteed. The score only reflects how the breakout ranks according to the script’s internal weighting model.
Donchian logic is inherently sensitive to lookback selection and market regime. A shorter channel can produce more frequent events and more noise, while a longer channel can reduce event frequency and delay signals. Volume-based confirmation also depends on the instrument and session structure. On some symbols, volume can be informative; on others, it may be less useful.
Retest logic is also contextual. Not every breakout will retest, not every retest will be clean, and not every valid hold will produce meaningful continuation. The retest zone is an interpretive tool designed to help chart reading, not a universal rule set for all instruments or timeframes.
The visual elements are intended to improve readability, but users may still want to tune label thresholds, style controls, and retest settings to fit their own workflow. As with any chart tool, results can vary across assets, volatility regimes, and timeframes.
Risk Disclosure
This script is for chart analysis and educational use. It is not financial advice, not investment advice, and not a promise of future performance. Markets can move unpredictably, and breakout structures can fail without warning. Any trading or investment decision should be made using independent judgment, personal risk controls, and additional confirmation where appropriate. Indicator
Indicator
AG Pro Ichimoku Cloud Equilibrium Map [AGPro Series]AG Pro Ichimoku Cloud Equilibrium Map
Overview / What it does
AG Pro Ichimoku Cloud Equilibrium Map is an Ichimoku-based overlay designed to map balance, displacement, and return-to-balance behavior around a dynamic equilibrium core. Instead of using Ichimoku primarily as a traditional bullish/bearish checklist, this script reorganizes the framework around one structural question: where is price trading relative to its current equilibrium, and is that position balanced, expanding, overstretched, or reclaiming balance?
The script blends Kijun-Sen with the cloud midpoint to build an equilibrium core, then expands that core into an adaptive equilibrium band using ATR and cloud thickness. From there, it classifies how price is behaving around that band and displays the result through chart states, optional labels, and a compact information panel.
This script is intended as a chart analysis tool. It is built to help users read structure more efficiently, especially when standard Ichimoku layouts feel visually dense or interpretation-heavy.
Unique Edge
The main difference is that this script does not treat Ichimoku as a simple trend confirmation overlay. It converts the Ichimoku framework into an equilibrium map.
Rather than focusing only on whether price is above or below the cloud, this script asks:
- Is price still near structural balance?
- Is price moving away from equilibrium in a controlled way?
- Has the move become stretched?
- Is price returning back into equilibrium after displacement?
That makes it different from a standard Ichimoku presentation, where the raw components are visible but the user must do most of the structural interpretation manually.
It is also different from other AG Pro scripts built around breakout quality, oscillator pressure, compression behavior, or reversion frameworks. This tool is specifically centered on equilibrium, extension, and reclaim behavior using an Ichimoku-derived structure model.
Methodology
The script uses the following structure:
1. Kijun-Sen
Kijun-Sen is used as one of the main balance anchors.
2. Cloud midpoint
The midpoint between Span A and Span B is used as a second structural reference.
3. Equilibrium core
The script combines Kijun-Sen and the cloud midpoint into a dynamic equilibrium core.
4. Equilibrium band
An adaptive band is built around the equilibrium core using ATR and cloud thickness. This allows the model to respond differently in quieter and more volatile conditions.
5. Stretch zones
Beyond the equilibrium band, the script defines stretch areas that help distinguish normal directional expansion from more extended displacement.
6. Reclaim logic
When price moves back into the equilibrium region after being outside it, the script can classify that transition as a reclaim state.
This methodology is designed to make Ichimoku structure more explicit without removing the original context of the cloud framework.
States / Signals & Alerts
The script classifies chart behavior into the following states:
Balanced
Price is trading inside the equilibrium band.
Bullish Expansion
Price is trading above the equilibrium band with supportive directional structure.
Bearish Expansion
Price is trading below the equilibrium band with supportive directional structure.
Overstretched Bullish
Price is extended above the stretch threshold.
Overstretched Bearish
Price is extended below the stretch threshold.
Bullish Reclaim
Price has returned into the equilibrium region after trading below it.
Bearish Reclaim
Price has returned into the equilibrium region after trading above it.
Available alert conditions:
- Bullish Expansion
- Bearish Expansion
- Overstretched Bullish
- Overstretched Bearish
- Bullish Reclaim
- Bearish Reclaim
These states and alerts are descriptive tools for chart analysis. They are not a complete trade plan and should be interpreted in context.
Key Inputs
Ichimoku settings
Users can adjust Tenkan length, Kijun length, Senkou Span B length, and displacement.
Equilibrium engine settings
Users can control ATR length, equilibrium band sensitivity, cloud-thickness contribution, stretch sensitivity, and chop lookback.
Visual settings
Users can control cloud visibility, Kijun visibility, equilibrium band visibility, stretch zones, state labels, label density, and panel appearance.
These inputs allow the script to be tuned for different symbols, volatility conditions, and chart preferences.
Limitations & Transparency
This script is an indicator, not a strategy.
It does not place trades, manage positions, calculate performance, or guarantee outcomes.
The Equilibrium Score is an internal structure summary built from distance, alignment, cloud thickness, Tenkan/Kijun spread, reclaim contribution, and chop penalty. It is not a probability model, not a forecast, and not a standalone decision engine.
Overstretched conditions do not automatically imply reversal.
Reclaim conditions do not automatically imply continuation.
Expansion conditions do not automatically imply strength will persist.
As with any chart tool, interpretation depends on market regime, timeframe, volatility, and the user’s broader workflow. In noisy environments, state changes can occur more frequently. The script includes filters to reduce clutter, but no indicator removes uncertainty completely.
Risk Disclosure
This script is provided for research and chart analysis only.
It is not financial advice. Users should evaluate any signal, state change, or alert within their own process, risk framework, and market context before making decisions.
Indicator
AG Pro VWMA Dislocation Map [AGPro Series]AG Pro VWMA Dislocation Map
OVERVIEW
AG Pro VWMA Dislocation Map is a state-based charting tool designed to measure how far price is trading from its volume-weighted mean, how persistent that displacement has become, and whether the move is still expanding or beginning to normalize.
This script is built around a simple but often underexplored idea: distance from a moving average is not equally meaningful in all situations. A small deviation can matter when it is persistent and building under directional participation, while a larger deviation can become less informative when the move is already mature and beginning to contract. Instead of treating every separation from the mean as identical, this script organizes that behavior into a structured framework.
The result is a visual map centered on VWMA behavior rather than a classic crossover model. The goal is not to guess tops or bottoms, and it is not to replace broader market structure analysis. The goal is to help the user read displacement quality, persistence, and normalization pressure around a volume-weighted equilibrium reference.
This makes the script useful in two very different but related contexts. In intraday use, it can help identify when a move is still building away from the mean versus when extension may already be mature. In swing use, it can help frame whether price is holding a healthy distance from its weighted mean or rotating back toward equilibrium.
WHAT MAKES IT DIFFERENT
This script is not presented as “another moving average” and it is not intended to function as a simple VWMA trend filter. Its design focus is the behavior around VWMA, not the line by itself.
The main distinction is the state model. Instead of reducing the chart to a binary above/below interpretation, the script tracks whether displacement is mild, active, persistent, extended, overextended, re-approaching, or rebalanced. That adds context to moves that may otherwise look similar at first glance but are materially different in maturity and behavior.
A second distinction is normalization. Raw distance in price units can be misleading across different symbols, different volatility conditions, and different phases of the same market. For that reason, the script evaluates displacement relative to a normalization unit rather than using absolute price distance alone. This is intended to make the map more comparable and more structurally meaningful.
A third distinction is presentation. The indicator is designed as a chart-reading framework, with a central weighted-mean structure, layered displacement bands, background state context, a last-bar state label, and a compact information panel. The output is meant to be descriptive and contextual rather than promotional or predictive.
METHODOLOGY
The script begins with a VWMA reference built from user-defined length and source settings. Around that reference, it measures normalized price displacement. The normalization can be based on ATR, standard deviation, or a hybrid approach, depending on the selected mode.
From there, the script derives several internal components:
1. Distance
This reflects how far price is trading from the VWMA after normalization. The purpose is to measure relative displacement rather than raw tick or point difference.
2. Persistence
This tracks how long the current directional displacement has remained active. A move that has stayed consistently above or below the weighted mean for multiple bars may carry a different interpretation than a one-bar separation.
3. Expansion
This evaluates whether the displacement is still building. Rising displacement can indicate that price is not merely away from the mean, but continuing to separate from it.
4. Normalization
This evaluates whether the displacement is beginning to contract toward the mean. It does not forecast reversal by itself. It is intended to show whether the existing separation is losing expansion pressure and moving into a more balanced phase.
5. Regime
The script also classifies contextual slope behavior into a simplified regime reading. This is not meant to be a full market regime engine. It is a compact contextual aid for distinguishing broader trend-like conditions from quieter or more balanced environments.
These components feed the state engine and the panel metrics. The result is not a claim of certainty, but a structured way to read where price is operating relative to a volume-weighted center.
STATE MODEL
The indicator organizes behavior into discrete chart states. These states are designed for interpretation, not for deterministic outcome prediction.
Balanced
Price is trading close to the VWMA and displacement is limited.
Early Dislocation
Price is beginning to separate from the weighted mean, but the move is still in an early stage.
Persistent Dislocation
Distance is no longer only emerging; it has remained active for a more sustained period.
Extended
The move has reached a stronger separation from the mean and may require more caution in interpretation.
Overextended
Displacement is extreme relative to the current normalization model. This does not mean price must reverse immediately. It indicates an elevated extension condition.
Re-approaching
Distance is beginning to contract and the move may be rotating back toward VWMA equilibrium.
Rebalanced
Price has moved back toward the mean after a prior displacement phase.
The practical value of this model is that it helps separate fresh movement from mature movement. Two charts can both be above VWMA, but one may be in an early building phase while another may already be extended and normalizing.
HOW TO READ THE PANEL
The information panel is designed to provide a quick summary of the current state without overwhelming the chart.
Score
A composite reading of displacement behavior. This is a contextual score, not a performance metric and not a probability estimate.
Bias
A directional summary based on price relative to VWMA.
Regime
A simplified context tag derived from the weighted-mean behavior.
Distance
The current normalized displacement from VWMA.
Persistence
The number of bars associated with the current directional displacement run.
Normalization
A compact measure of contraction pressure toward the weighted mean.
Footer interpretation
A short descriptive line showing the current qualitative state context and whether displacement is expanding or contracting.
The panel is intended to summarize current conditions, not to replace full chart reading.
VISUAL STRUCTURE
The chart output is designed to be read in layers.
The central weighted-mean structure provides the equilibrium reference.
The inner visual structure highlights the core region around VWMA.
The displacement bands expand outward to show increasingly stretched conditions relative to the normalization thresholds.
The background tint provides a broad state cue so users can quickly identify periods of balance, active displacement, or higher extension.
The last-bar state label is included to make the current state readable at a glance without scanning the full panel.
This layered design is intentional. It allows the script to remain visually expressive while still communicating a hierarchy: center, displacement, extension, and normalization.
HOW THIS TOOL MAY BE USED
Some users may apply the script as a continuation context tool. In that workflow, the focus is less on exact entries and more on whether a move is still developing in a healthy way away from the weighted mean.
Some users may apply it as an extension-awareness tool. In that workflow, the purpose is to identify when a move may already be mature and when aggressive continuation assumptions deserve more caution.
Others may use it as a mean-normalization context tool. In that workflow, the interest is not whether price is simply above or below VWMA, but whether the separation is holding, expanding, or rotating back toward equilibrium.
Because of this flexibility, the script is not restricted to one market style. It can be used as an analytical overlay in trending markets, in rotational conditions, or as part of a broader discretionary review process.
SIGNALS AND ALERTS
The script includes alerts tied to state transitions and context changes. These alerts are descriptive events based on the model, not trade promises.
Persistent Dislocation
Triggers when the script enters the Persistent Dislocation state.
Extended
Triggers when the script enters the Extended state.
Overextended
Triggers when the script enters the Overextended state.
Re-approaching
Triggers when the script enters the Re-approaching state.
Rebalanced
Triggers when price rotates back toward the weighted mean after prior displacement.
Score Threshold Cross
Triggers when the composite score crosses above the user-defined threshold.
Bias Flip
Triggers when directional bias flips across VWMA.
These alerts are intended to support monitoring and workflow organization. They should be interpreted in the context of the broader chart.
KEY INPUTS
VWMA Length
Controls the length of the volume-weighted mean.
Normalization Mode
Selects whether normalized displacement is built from ATR, standard deviation, or a hybrid of the two.
Normalization Length
Controls the lookback used in the normalization engine.
Distance Smoothing
Adjusts smoothing applied to the displacement behavior.
Regime Lookback
Controls the lookback used in the regime context calculation.
State Thresholds
Define how mild, active, strong, and extreme displacement are classified.
Persistence Confirmation Bars
Helps distinguish brief separation from more sustained displacement.
Re-Approach Confirmation Bars
Controls how quickly the script recognizes contraction back toward the mean.
Visual Settings
Allow the user to manage bands, background context, VWMA visibility, line strength, opacity behavior, and label placement.
Panel Settings
Allow layout, position, theme, and text sizing adjustments.
The script is intended to be configurable so the same framework can be adapted to different symbols and timeframes without changing its core logic.
LIMITATIONS AND TRANSPARENCY
This script does not predict future price direction.
It is not a standalone trading system, not an execution engine, and not a substitute for full chart analysis.
A strong displacement can remain strong for longer than expected. An overextended reading does not guarantee immediate reversal. A re-approaching or rebalanced state does not guarantee that a larger directional move has ended.
Like any normalized framework, the output depends on the settings chosen by the user. Different symbols, timeframes, volatility environments, and threshold selections can meaningfully change the visual behavior and state classification.
The script should be understood as a descriptive map around a volume-weighted mean, not as a promise of edge by itself.
RISK DISCLOSURE
This indicator is for analytical and educational charting use only.
It does not provide financial advice, investment advice, or guaranteed outcomes.
All trading and investing involve risk. Users should evaluate any signal, state change, or alert in the context of their own process, market conditions, risk controls, and independent judgment.
AG Pro VWMA Dislocation Map is designed to help structure interpretation around VWMA displacement behavior. It is not designed to remove uncertainty from markets, and it should not be used as the sole basis for financial decisions.
Indicator
AG Pro ATR Compression Map [AGPro Series]AG Pro ATR Compression Map
Overview / What it does
AG Pro ATR Compression Map is a chart-first compression analysis tool designed to evaluate how organized a low-volatility phase is and how structurally developed that contraction has become.
Instead of treating every quiet market phase as equally meaningful, the script separates loose and unstable contraction from cleaner, more contained compression conditions. The goal is not to label every narrow range as important, but to provide a structured visual framework for monitoring whether a tightening phase is becoming more coherent and potentially worth closer attention.
The script is built for users who want to read compression quality directly on the chart without relying on overly complex dashboard-style presentation. It highlights active compression zones, assigns a normalized compression score, classifies the current state of contraction, and summarizes the condition through a compact on-chart panel.
This is intended as a context and monitoring tool. It does not attempt to forecast direction, guarantee expansion, or replace execution planning and risk management.
Unique Edge
The main idea behind this script is that low volatility alone is not enough.
Many consolidations look similar at first glance, but their internal structure can be very different. Some are noisy, unstable, and disorderly. Others become progressively tighter, cleaner, and more contained. AG Pro ATR Compression Map is designed to make that distinction clearer.
Its edge is not based on directional prediction. Instead, it evaluates compression quality through a blended framework that combines volatility contraction, local range tightening, internal noise behavior, and containment structure. This allows the script to differentiate between random quiet price action and more organized compression phases.
This also keeps the script distinct from tools that focus on breakout confirmation, retest quality, trend classification, or level-based pressure analysis. Here, the focus is narrower and more specific: measuring the quality of compression itself.
Methodology
The script combines four internal components into a unified compression score:
1) ATR contraction
Measures whether current ATR is compressed relative to its own baseline.
2) Range tightness
Measures whether the recent price range has narrowed compared with a broader reference window.
3) Noise evaluation
Evaluates whether the contraction phase is relatively clean or increasingly disordered. This includes internal bar behavior such as wick activity, directional flipping, and local overlap behavior.
4) Structural containment
Measures whether price is remaining contained within a tighter local area instead of drifting loosely inside a broad consolidation.
These components are normalized and combined into a 0-100 compression score.
The script then classifies the result into four stages:
• Loose
• Building
• Tight
• Mature
This stage logic is designed to help distinguish early contraction from more developed compression conditions. Higher states reflect more structured tightening, but not certainty of resolution.
What the script highlights
• Compression zone
A shaded chart area is displayed when compression conditions are active.
• Compression score
A compact label shows the current normalized compression score.
• State label
The current compression stage is shown directly on the chart.
• Mini panel
A small panel summarizes ATR state, range state, noise condition, containment quality, overall compression score, active state, and current compression window length.
Signals & Alerts
This script includes deterministic alert conditions for:
• Compression Active
Triggered when compression conditions become active according to the script's scoring logic.
• Compression Mature
Triggered when the current state reaches Mature.
• Compression State Change
Triggered when the internal compression state changes.
These alerts are designed to reflect state transitions inside the script's existing framework. They should be interpreted as analytical status changes, not as trade instructions.
Key Inputs
Main controls include:
• ATR Length
• Baseline Length
• Range Window
• Noise Window
• Containment Window
• Compression Threshold
• Mature Threshold
The script also includes display controls for zone visibility, labels, panel position, theme mode, text sizing, and label offset. Advanced options allow stricter filtering and additional sensitivity controls for wick behavior and close-overlap behavior.
How to read it
In practice, the script is most useful when users want to answer questions such as:
• Is this contraction still loose, or is it becoming more organized?
• Is the range tightening in a meaningful way, or is price simply drifting?
• Is the structure relatively clean, or is internal noise increasing?
• Has the compression developed enough to justify closer monitoring?
A higher compression score means the script is detecting tighter and more structured contraction conditions. A lower score suggests that the current quiet phase is still broad, unstable, or underdeveloped.
Best use cases
This script can be useful when monitoring:
• developing consolidations
• low-volatility phases inside broader trends
• pre-expansion observation zones
• structured pauses after directional movement
• markets where users want to distinguish clean compression from random inactivity
It is especially suited for traders who prefer chart-first context tools rather than signal-heavy overlays.
Limitations & Transparency
Compression can remain inactive for long periods, fail to resolve cleanly, or resolve without meaningful follow-through.
A high compression reading does not imply directional certainty, timing certainty, or inevitable expansion. Likewise, a low reading does not mean price cannot move sharply. The script measures structure quality inside contraction conditions. It does not measure certainty.
The output should be used as contextual information alongside price action, market structure, execution rules, and risk management.
What it does not do
This script does not:
• predict breakout direction
• guarantee expansion
• project targets
• replace trade planning
• function as a standalone entry engine
Risk Disclosure
For educational and analytical use only. Indicator
AG Pro VWAP Reclaim Quality [AGPro Series]AG PRO VWAP RECLAIM QUALITY
OVERVIEW
AG Pro VWAP Reclaim Quality is a chart-first tool built to evaluate whether a move back above VWAP is clean, weak, delayed, or structurally fragile.
This script does not treat every recovery above VWAP as equally meaningful. Instead, it grades the reclaim event itself and then follows what happens next: whether price can hold above VWAP, whether the retest is constructive, and whether the reclaim deteriorates shortly after recovery.
The objective is simple: separate efficient VWAP reclaims from noisy or late recoveries that may look promising at first glance but fail to show durable acceptance.
This makes the script useful for traders who want more context than a basic VWAP cross. A standard cross can show that price moved from one side of VWAP to the other. This script is designed to evaluate the quality of that transition.
UNIQUE EDGE
The focus here is not generic VWAP direction bias and not a simple above/below state model.
The main edge of the script is its reclaim-quality framework. It evaluates the reclaim as a sequence rather than as a one-line event:
1) reclaim strength,
2) post-reclaim acceptance,
3) retest behavior,
4) timing quality,
5) failure risk.
That structure is what differentiates it from ordinary VWAP cross tools.
A reclaim that closes back above VWAP with a strong bar, holds acceptance, and survives a disciplined retest should not be treated the same as a reclaim that occurs late, stalls immediately, or fails after a shallow recovery. This script is designed to reflect that distinction visually and systematically.
In practical terms, the script attempts to answer a more specific question:
Is this reclaim simply back above VWAP, or is it actually behaving like a higher-quality recovery?
METHODOLOGY
The script starts by tracking session VWAP and identifying reclaim attempts after price has spent time below it.
Once a reclaim is detected, the script evaluates several components:
1) Reclaim strength
The reclaim bar is assessed using distance from VWAP, body efficiency, and close location within the bar. This helps distinguish decisive recoveries from marginal crosses.
2) Acceptance above VWAP
After the reclaim, the script measures whether price is actually holding above VWAP over the next bars. Stable acceptance is treated differently from mixed or poor acceptance.
3) Retest behavior
The script checks whether price revisits VWAP inside a defined tolerance area and whether that test is held constructively. A confirmed retest is handled as separate information rather than being merged blindly into the initial reclaim.
4) Timing quality
Reclaims that occur after an extended stay below VWAP, or later in the intraday session, can be penalized. This allows the script to separate timely recoveries from delayed ones.
5) Failure logic
A reclaim can later be downgraded if price loses structure below VWAP after the recovery. This failure layer is intentionally more selective so that minor noise is not treated as a meaningful reclaim breakdown.
The result is a compact grading model that produces a readable chart-first output instead of a large diagnostic dashboard.
HOW TO READ THE OUTPUT
Main chart labels:
- CLEAN: reclaim quality is strong and structurally healthy
- LATE: reclaim occurred, but timing quality is weaker or delayed
- RT HOLD: VWAP retest was revisited and held constructively
- FAILED: reclaim lost quality and broke down after recovery
Panel fields:
- VWAP Reclaim: current reclaim classification
- Reclaim: strength of the reclaim move itself
- Acceptance: quality of post-reclaim holding behavior
- Retest: whether a constructive retest is confirmed
- Bias: summary interpretation of the current reclaim state
- Quality: compact score representation
The chart is intentionally designed to stay visual and readable. The panel provides state context, while the labels highlight the important transition points.
SIGNALS AND ALERTS
The script includes alert conditions for:
- Clean Reclaim
- Late Reclaim
- Retest Hold
- Failed Reclaim
These alerts are intended to map to the reclaim lifecycle rather than to every minor VWAP interaction.
For more conservative usage, bar-close confirmation is generally preferable when evaluating reclaim quality, especially on volatile instruments or during rapid intrabar movement.
KEY INPUTS
Some of the main controls include:
- VWAP source
- ATR length
- reclaim distance normalization
- minimum prior bars below VWAP
- late reclaim thresholds
- acceptance lookback
- retest tolerance and retest window
- failure delay bars
- panel text size and panel theme
- label visibility and label discipline controls
The script also includes label filtering logic to reduce clustering and keep the chart cleaner by default.
WHAT THIS SCRIPT IS DESIGNED FOR
This script is designed for traders who want to evaluate reclaim quality around VWAP, not merely track whether price is above or below it.
Typical use cases may include:
- reviewing whether a recovery above VWAP has enough structural follow-through
- filtering weak reclaims from stronger continuation candidates
- identifying retest discipline after reclaim
- spotting delayed or fragile recovery behavior
- keeping a cleaner visual workflow around VWAP-based chart reading
LIMITATIONS AND TRANSPARENCY
This script is not a prediction engine and should not be interpreted as a guaranteed continuation model.
A reclaim labeled as clean can still fail.
A reclaim labeled as late can still continue.
A failed reclaim label does not automatically imply a larger bearish trend.
The tool is designed to classify reclaim behavior around VWAP, not to replace broader market structure analysis.
Like all chart-based tools, outputs can vary depending on instrument, volatility regime, timeframe, and user settings.
VWAP-based behavior is also context-dependent. Market environment, liquidity, trend phase, and volatility expansion can all influence reclaim behavior beyond what a single script can capture.
This script is therefore best used as a structured interpretation tool, not as a standalone decision framework.
RISK DISCLOSURE
This indicator is for chart analysis and research use only. It does not provide investment advice, portfolio advice, or trade guarantees.
Always evaluate signals within broader market context, risk management, and your own execution process.
No single indicator should be relied upon in isolation.
NOTES
This publication focuses on reclaim quality around VWAP rather than generic VWAP crosses.
The aim is to keep the logic interpretable, the visuals readable, and the methodology transparent. Indicator
AG Pro Price Acceptance Profile [AGPro Series]AG Pro Price Acceptance Profile
OVERVIEW
AG Pro Price Acceptance Profile is a price-structure tool designed to reveal where the market is spending time, where it is repeatedly returning, and where it is rejecting price efficiently.
Instead of using volume distribution, signal arrows, or breakout-style triggers, this script builds an acceptance/rejection map from price-time interaction inside a rolling lookback window. The goal is simple: make it easier to identify where price is being accepted, where it is being rejected, and whether current price is trading inside balance or at its outer edges.
This is not a volume profile clone, not a support/resistance line generator, and not a momentum signal script. It focuses on one specific question:
Which price areas are currently showing repeated acceptance, and which areas are failing to hold price?
That narrow focus is intentional. The script is built as an analytical context tool rather than an entry engine.
UNIQUE EDGE
The core idea is to measure acceptance through price-time behavior rather than centralized volume data.
The profile logic evaluates how often price revisits a zone, how long it tends to remain there, and how efficiently it exits that zone. This creates a structured map of:
- Acceptance zones
- Rejection zones
- The active balance area
- The current market state relative to that balance
Because the methodology is based on price persistence and revisit behavior, the script can be useful on markets where volume-based profiling is either unavailable, fragmented, or not the preferred analytical lens.
METHODOLOGY
The script divides the rolling price range into rows and evaluates each row using multiple internal dimensions derived from recent bars:
1) Time at price
Measures how frequently the market occupies each row across the selected lookback.
2) Revisit density
Tracks how often price returns to a row after leaving it. Repeated revisits can indicate ongoing acceptance or unfinished balancing behavior.
3) Dwell persistence
Approximates whether the market tends to spend stable time in an area rather than only touching it briefly.
4) Rejection speed
Measures how efficiently price exits an area after interaction. Faster and cleaner exits tend to support rejection classification.
5) Balance mapping
Uses the strongest acceptance region to define the current balance area and then classifies the live market location relative to it.
The result is a simplified profile-style framework built from price behavior itself.
HOW TO READ IT
The large balance area highlights the current acceptance region derived from the profile engine.
Acceptance zones mark price areas that showed stronger persistence, repeated interaction, and better structural acceptance within the chosen lookback.
Rejection zones mark areas where price interacted but failed to remain stable, leading to less durable occupation and faster displacement.
The panel is designed to summarize the current profile state:
- Acceptance Strength: relative quality of the dominant accepted area
- Revisit Density: how actively the market is returning to profiled zones
- Balance Width: width of the accepted region relative to the full profiled range
- Rejection Speed: how efficiently price is leaving unstable areas
- Location: whether current price is inside, above, or below balance
In practice, traders can use the script to distinguish between stable trade location and unstable trade location, instead of treating every nearby level as equally important.
KEY INPUTS
Lookback
Controls how much recent history is used to build the profile.
Rows
Defines profile resolution. Higher values increase granularity but can also make the map more sensitive.
Acceptance Threshold / Rejection Threshold
Adjust how selective the script is when classifying stronger acceptance and rejection areas.
Maximum Acceptance / Rejection Zones
Controls chart density and visual focus.
Panel and label settings
Allow adaptation for different chart layouts and screen sizes.
LIMITATIONS AND TRANSPARENCY
This script does not predict future price movement.
It does not generate guaranteed reversal points.
It does not replace execution logic or risk management.
Acceptance and rejection are contextual measurements derived from the selected lookback and row resolution. Different settings can produce different maps because the profile is adaptive by design.
As with any charting tool based on rolling historical context, zones may evolve when older bars leave the lookback window and new bars enter it.
This script is best used as a contextual framework for market location, not as a standalone trade mandate.
RISK DISCLOSURE
This indicator is for analytical and educational use only. It does not provide financial advice, investment advice, or trading guarantees. All trading decisions remain the responsibility of the user. Indicator
Indicator
Price Memory Heatmap [BullByte]Price Memory Heatmap - Dynamic Support & Resistance Through Market Memory
Price Memory Heatmap visualizes where markets remember. It identifies price levels where repeated reactions have occurred, measures their intensity through a proprietary heat system, and displays them as dynamic zones that strengthen with each new reaction and naturally fade when the market moves on.
This is not a combination of existing indicators. It is a unified analytical framework built around one original concept: price levels accumulate heat from confirmed reactions and lose heat through exponential decay when untouched. The result is a self-organizing, self-cleaning map of historically significant price zones that evolves with every bar.
---
WHAT THIS INDICATOR DOES
Price Memory Heatmap tracks price levels where significant market reactions have occurred. Each level is treated as a living entity with memory:
→ Gains heat when price reacts at it (confirmed pivots and wick rejections)
→ Loses heat over time when untouched (exponential decay)
→ Displays visual intensity proportional to accumulated reaction history
→ Gets removed automatically when its heat falls below a minimum threshold
→ Classifies real-time price behavior at each zone (Rejection, Sweep, Break, Retest, Absorption)
The indicator tracks up to 20 memory levels simultaneously and displays only the most significant ones based on heat intensity and reaction count. Zones are color-coded from cool (low activity) to hot (high activity), giving instant visual hierarchy of level importance.
Key outputs:
→ Heat-mapped zones showing historical reaction intensity
→ Classification labels (Developing, Active, Strong, Dominant)
→ Hit count showing total confirmed reactions at each level
→ Relative volume multiplier showing conviction behind reactions
→ Level age tracking (Fresh, Seasoned, Veteran)
→ Real-time behavior detection integrated into zone labels
→ Summary dashboard ranking all active levels by heat
---
WHY THIS INDICATOR EXISTS
Traditional support and resistance tools draw static lines. They cannot tell you whether a level was tested once or ten times, whether reactions were backed by strong volume or weak, whether the level was formed yesterday or months ago, or how price is currently interacting with that level.
Price Memory Heatmap addresses each of these gaps through a single cohesive system:
PROBLEM: "Is this level significant?"
→ SOLUTION: Heat intensity and classification tier tell you immediately. A Dominant zone with 8 hits is far more significant than a Developing zone with 2 hits.
PROBLEM: "Was there conviction behind reactions at this level?"
→ SOLUTION: Relative volume multiplier shows whether reactions attracted above-average volume (e.g., 2.3x means 2.3 times the average bar volume).
PROBLEM: "Is this level still relevant?"
→ SOLUTION: Exponential decay naturally fades untouched levels. If the market has forgotten a level, the indicator forgets it too.
PROBLEM: "How is price interacting with this level right now?"
→ SOLUTION: Real-time behavior detection classifies the current interaction as Rejection, Sweep, Break, Retest, or Absorption.
PROBLEM: "How old is this level?"
→ SOLUTION: Age tracking categorizes each level as Fresh (recently formed), Seasoned (survived multiple decay cycles), or Veteran (persistent structural significance).
---
HOW PRICE MEMORY WORKS
The lifecycle of a memory level:
BIRTH - A confirmed pivot swing (high or low) creates a new memory level, or merges into a nearby existing level if one exists within the merge distance.
REINFORCEMENT - Each subsequent reaction at the level adds heat. Reactions with above-average volume add proportionally more heat. The level's price adjusts as a weighted average of all reactions.
DECAY - Every bar without a reaction, the level's heat is multiplied by the decay rate (default 0.992). This creates a natural half-life where untouched levels gradually lose prominence.
DEATH - When heat falls below the death threshold (default 0.08), the level is permanently removed. This keeps the chart clean and focused on relevant levels.
The heat value drives everything:
→ Zone color intensity (hotter = more prominent visual)
→ Classification tier (Dominant, Strong, Active, Developing)
→ Dashboard ranking (sorted by heat, hottest first)
→ Glow effect intensity (stronger glow on high-heat zones near price)
Additionally, wick rejections are detected as secondary reaction sources. When a candle wicks into an existing level and rejects (closes away), it adds heat at half the rate of a confirmed pivot, preventing over-weighting of intrabar noise while still capturing meaningful reactions.
---
WHY THIS IS NOT A MASHUP
This indicator uses pivot detection, ATR, and volume data internally, but it does not combine or display existing indicators. The distinction is fundamental:
A mashup displays independent indicators together on one chart.
This indicator uses standard calculations as INPUT MECHANISMS feeding a completely original processing engine whose output cannot be replicated by any combination of existing tools.
→ Pivots = Detection mechanism only (identifies where reactions occur)
→ ATR = Scaling parameter only (normalizes distances across any asset)
→ Volume = Weighting modifier only (amplifies high-conviction reactions)
→ Heat Accumulation + Decay = ORIGINAL (no existing indicator does this)
→ Dynamic Level Lifecycle = ORIGINAL (birth, reinforce, decay, death)
→ Behavior Detection at Levels = ORIGINAL (classifies interaction patterns)
No component is displayed independently. Everything feeds the central price memory concept.
---
HOW TO READ THE ZONES
ZONE COLORS (Dark Theme - default):
→ Purple/Blue tones = Low heat, Developing level (fewer reactions)
→ Red tones = Medium heat, Active or Strong level
→ Orange/Yellow/Gold tones = High heat, Dominant level (many confirmed reactions)
ZONE COLORS (Light Theme):
→ Gray/Steel tones = Low heat
→ Red/Dark Red tones = Medium to high heat
ZONE COLORS (Classic S/R Theme):
→ Green = Level currently acting as support (price above the zone)
→ Red = Level currently acting as resistance (price below the zone)
ZONE THICKNESS:
Zones expand slightly as heat increases and pulse larger when price approaches (proximity effect). The glow effect adds a soft outer halo that intensifies on high-heat levels near current price, providing immediate visual emphasis on the most important nearby zones.
ZONE LIFESPAN:
Each zone extends from its birth bar to a configurable number of bars into the future (default 15). This visual extension is purely for display - it helps identify where zones project ahead of price. Older zones with maintained heat indicate structural levels where the market has shown persistent memory.
---
HOW TO READ THE LABELS
Each visible zone displays a label with key information. The label format depends on the selected Label Mode. When behavior is detected, it is appended to the end of the label.
MINIMAL MODE EXAMPLE:
"STR 5 2.3x SEA REJ↑"
→ STR = Classification (Strong)
→ 5 = Hit count (5 confirmed reactions)
→ 2.3x = Relative volume (2.3 times average per reaction)
→ SEA = Age (Seasoned - 50 to 200 bars old)
→ REJ↑ = Current behavior (Bullish Rejection detected)
STANDARD MODE EXAMPLE:
"Strong | 5 hits | 2.3x | SEA | Rejection ↑"
→ Full classification name
→ Hit count with label
→ Relative volume multiplier
→ Age abbreviation
→ Full behavior name with direction
DETAILED MODE EXAMPLE:
"Strong | Resistance | 5 | 2.3x | 1.2345 | Seasoned | Sweep ↓"
→ Classification
→ Current support/resistance status
→ Hit count
→ Relative volume
→ Exact price
→ Full age name
→ Full behavior name
LARGE MODE:
Same information as Standard but rendered in larger text for visibility.
When no behavior is currently detected, the behavior portion is simply omitted from the label.
CLASSIFICATION TIERS:
→ Developing = Heat below 40% of max OR fewer than 3 hits
→ Active = Heat above 40% AND 3 or more hits
→ Strong = Heat above 60% AND 4 or more hits
→ Dominant = Heat above 80% AND 5 or more hits
AGE CATEGORIES:
→ Fresh (NEW) = Less than 50 bars since first detection
→ Seasoned (SEA) = Between 50 and 200 bars old
→ Veteran (VET) = More than 200 bars old
A Veteran level with high heat indicates deep structural significance - a price where the market has reacted repeatedly over an extended period and continues to hold relevance.
RELATIVE VOLUME EXPLAINED:
The volume shown is NOT raw volume. It is a normalized multiplier showing how much volume reactions attracted compared to the average bar:
→ 1.0x = Average volume at reactions
→ 2.0x or higher = Above-average conviction behind reactions
→ Below 0.5x = Below-average conviction
→ "-" = Volume data unavailable for this asset
Volume is calculated using attributed notional value: only the fraction of bar volume proportional to the zone width is counted, preventing large-range bars from inflating readings.
---
HOW TO READ THE DASHBOARD
The dashboard provides a ranked summary of all active memory levels. It appears as a table overlay on the chart (position configurable).
COLUMN-BY-COLUMN:
# → Rank by heat intensity. An asterisk (*) marks the highest-heat level. Numbers rank the rest.
PRICE → The exact price of the memory level, formatted to the asset's tick precision. This is the weighted-average price across all reactions at this level.
CLASS → Classification tier (Developing, Active, Strong, Dominant). In Classic S/R theme, a suffix "S" (Support) or "R" (Resistance) is appended based on whether price is above or below the level.
HEAT → Visual heat bar using 8 segments.
→ "||||||||" = Maximum heat (hottest level)
→ "||||...." = Moderate heat
→ "|......." = Low heat (may decay out soon)
HITS → Total number of confirmed reactions at this level. This includes both pivot-confirmed reactions and qualified wick rejections.
RVOL → Relative volume multiplier averaged across all reactions at this level. Higher values indicate stronger volume conviction behind the reactions that built this level.
STATUS → A dynamic field showing one of three things:
→ Behavior pattern name if currently detected (e.g., "REJ↑", "SWP↓", "BRK↑")
→ "At level" if price is within 0.15% of the zone (highlighted in green)
→ Distance as percentage if price is away (e.g., "1.25% above")
AGE → How long the level has existed (NEW, SEA, VET).
FOOTER → Shows total memory levels being tracked, how many are currently visible, and the current decay rate setting.
---
BEHAVIOR DETECTION
When price approaches a memory zone, the indicator analyzes real-time price action to classify how the market is interacting with that level. The detected behavior is displayed as part of the zone label and in the dashboard STATUS column.
Behaviors are checked in priority order. Only the highest-priority match is displayed.
BREAK (Highest Priority):
→ Price opens on one side of the zone and closes decisively on the other
→ Requires strong body (more than 50% of candle range)
→ Close direction must match candle direction (bullish close for Break ↑)
→ Indicates the level has failed and may flip from support to resistance or vice versa
→ Once a Break is detected, the level is marked internally so future Retest detection becomes possible
SWEEP:
→ Price extends significantly beyond the zone (1.5x zone height past the edge) then reverses
→ The extended wick must be larger than the body and more than 35% of total range
→ Close must be back near or inside the zone
→ This pattern often represents a liquidity grab - price pushes through to trigger stops then reverses
REJECTION:
→ A prominent wick touches or enters the zone, and the body closes away
→ Wick must exceed 45% of the candle's total range
→ Body must have meaningful size (more than 25% of range) confirming conviction
→ Indicates the level is actively defending - buyers or sellers are stepping in
RETEST:
→ Price returns to a level that was previously broken
→ Requires all lookback bars to have been on one side (away from zone)
→ Current bar must touch the zone
→ This is the classic "support becomes resistance" or "resistance becomes support" confirmation
ABSORPTION (Lowest Priority):
→ Multiple consecutive bars with bodies inside the zone
→ Average body size is small relative to average range (less than 45%)
→ Indicates accumulation or distribution is occurring within the zone
→ Often precedes significant directional moves
Behaviors persist in the label until a new behavior is detected. When price moves away from the zone, the last detected behavior remains visible, giving context about the most recent significant interaction.
---
RECOMMENDED TIMEFRAMES AND SETTINGS
SCALPING (1-minute to 15-minute charts):
→ Pivot Sensitivity: 2 to 4
→ Decay Rate: 0.980 to 0.985 (faster fade for fast markets)
→ Min Hits: 2
→ Focus on Fresh and Seasoned levels
DAY TRADING (15-minute to 1-hour charts):
→ Pivot Sensitivity: 5 to 8
→ Decay Rate: 0.990 to 0.992 (default range)
→ Min Hits: 2 to 3
→ Balanced mix of age categories
SWING TRADING (4-hour to daily charts):
→ Pivot Sensitivity: 10 to 15
→ Decay Rate: 0.994 to 0.996 (slower fade)
→ Min Hits: 3
→ Focus on Seasoned and Veteran levels
POSITION TRADING (daily to weekly charts):
→ Pivot Sensitivity: 15 to 25
→ Decay Rate: 0.997 to 0.999 (very slow fade)
→ Min Hits: 3 to 4
→ Focus on Veteran levels with high heat
GENERAL TIPS:
→ Higher timeframes benefit from increased Pivot Sensitivity
→ Volatile assets benefit from increased Merge Distance
→ For cleaner charts, increase Min Hits to Display
→ For more context, increase Max Memory Slots and Show Top N Levels
---
PRACTICAL EXAMPLES
EXAMPLE 1 - IDENTIFYING HIGH-PROBABILITY REACTION ZONES:
A Dominant-classified zone (gold/yellow) showing 7 or more hits with Veteran age tells you this is a deeply embedded structural level. The market has reacted here many times over hundreds of bars and the level continues to maintain high heat. When price approaches this zone, the probability of a meaningful reaction is elevated compared to a Developing zone with 2 hits.
EXAMPLE 2 - CONFIRMING A BREAKOUT:
Price approaches a Strong resistance zone. The label updates to show "Break ↑" as price closes decisively above. The dashboard STATUS column changes from "0.5% below" to "BRK↑". If price later returns to this zone and the label shows "Retest ↑", this confirms the classic resistance-to-support flip pattern. The zone's wasBroken flag ensures Retest detection only activates after a confirmed Break.
EXAMPLE 3 - SPOTTING LIQUIDITY SWEEPS:
A high-heat zone sits above price. Price spikes through the zone with a long upper wick but closes back inside or below. The label displays "Sweep ↓" indicating a potential stop-hunt pattern. The wick exceeded 1.5 times the zone height beyond its edge and the upper wick dominated the candle's body - both requirements for Sweep classification.
EXAMPLE 4 - READING VOLUME CONVICTION:
Two zones appear near current price. Zone A shows "2.8x" relative volume while Zone B shows "0.6x". The reactions that built Zone A attracted nearly 3 times the average bar volume, suggesting strong institutional interest. Zone B's reactions occurred on below-average volume, suggesting less conviction. This context helps prioritize which zone is more likely to produce a meaningful reaction.
EXAMPLE 5 - USING LEVEL AGE FOR CONTEXT:
A Veteran level (more than 200 bars old) that still maintains high heat has survived hundreds of decay cycles. Each cycle multiplies its heat by 0.992 (default). After 200 bars of decay without any new reactions, heat would fall to roughly 20% of its peak. For a Veteran level to remain Dominant, it must have received consistent reinforcement over time - indicating genuine structural significance rather than a one-time event.
---
Chart Example
1. Price on the S&P 500 E-mini Futures 15-minute chart is consolidating within a tight range between two heavily-tested Veteran zones, with the gold Dominant level acting as a persistent floor and an orange 22-hit Veteran zone overhead cycling through live behaviors as price repeatedly tests it from below. A structured ladder of purple Developing and red Active zones extends well below current price, with a Retest ↓ pattern visible at a mid-range level indicating a previously broken area is now being revisited from above. The dashboard confirms 17 memory levels tracked with 8 visible, the top-ranked Dominant zone holding a full heat bar and Break ↑ in its STATUS column throughout the session.
2. Price on the Nifty 50 Index 5-minute chart surged strongly through a cluster of high-heat gold zones during the session, reaching a peak at a thin Developing resistance level before pulling back sharply into a contested area between a Dominant zone and a Strong zone sitting just below it. The upper region shows two gold/yellow zones in close proximity - a Dominant and a Strong, both with Sweep behaviors active in their labels, indicating a liquidity grab above followed by a sharp reversal back into the zone cluster. The dashboard shows two Dominant-classified levels in the top two ranks, with a rich mix of Veteran and Seasoned ages confirming this price area carries deep structural memory.
---
SETTINGS REFERENCE
CORE SETTINGS:
→ Pivot Sensitivity - Bars on each side to confirm a swing. Lower = more sensitive, more levels.
→ Merge Distance - How close two reactions must be (in ATR multiples) to merge into one level.
→ ATR Period - Period for volatility normalization (default 14).
MEMORY SETTINGS:
→ Decay Rate - Per-bar multiplier for heat decay. 0.992 = balanced default.
→ Heat Per Reaction - Base heat added per confirmed reaction. Modified by volume weighting.
→ Death Threshold - Minimum heat to survive. Below this, the level is removed.
→ Max Memory Slots - Maximum simultaneous levels tracked (default 20).
→ Min Hits to Display - Reactions required before a zone becomes visible (default 2).
→ Show Top N Levels - Maximum zones rendered on chart (default 8).
DETECTION SETTINGS:
→ Wick Rejections - Enable wick-based reaction detection (adds heat at half rate of pivots).
→ Min Wick Ratio - Required wick percentage for wick reactions (default 55%).
→ Volume-Weighted Heat - Weight reactions by relative volume.
→ Behavior Detection - Enable real-time pattern classification at zones.
→ Behavior Lookback - Bars analyzed for behavior patterns (default 3).
APPEARANCE SETTINGS:
→ Color Theme - Dark (purple to gold gradient), Light (gray to red), Classic S/R (green/red).
→ Zone Thickness - Visual height of zones as ATR fraction.
→ Glow Effect - Soft outer halo that intensifies near price.
→ Proximity Radius - Distance at which proximity effects activate.
LABEL SETTINGS:
→ Show Zone Labels - Toggle zone information labels.
→ Label Mode - Information density (Minimal, Standard, Detailed, Large).
→ Show Hit Count - Include reaction count in labels.
→ Show Relative Volume - Include volume multiplier in labels.
→ Reaction Dots - Show dots at exact reaction prices (off by default for chart clarity).
DASHBOARD SETTINGS:
→ Show Dashboard - Toggle the summary table.
→ Position - Screen position (8 options).
→ Text Size - Font size (Tiny, Small, Normal).
→ Rows - Number of levels shown in dashboard (default 5).
---
ALERTS
Three alert conditions are available:
"Price entered hot zone" - Triggers when price enters a high-heat zone with 3 or more hits and heat above 50% of maximum. Useful for monitoring approaches to significant levels.
"New behavior detected" - Triggers when a new behavior pattern (Rejection, Sweep, Break, Retest, Absorption) is classified at any visible level. Useful for real-time event notification.
"New reaction" - Triggers when a new pivot is confirmed. Useful for tracking all reaction events across all levels.
All alerts describe observed events. They do not predict future price movement or generate buy/sell signals.
---
IMPORTANT NOTES
RETROACTIVE ANCHORING:
Pivot-based levels are confirmed after the Pivot Sensitivity number of bars have passed. The level is drawn at the true swing bar but only becomes known after confirmation. This is standard pivot behavior used across all pivot-based indicators and does not constitute future data usage.
VOLUME DATA AVAILABILITY:
Some assets, particularly certain forex pairs, may not report volume data. When volume is unavailable, relative volume displays show "-" and volume weighting is automatically disabled. The indicator functions fully without volume data.
EARLY CHART BEHAVIOR:
Zones and behavior labels may be sparse early in chart history. The indicator needs sufficient bars to detect pivots, accumulate heat, and meet the minimum hit count. Allow at least 100 bars for the system to populate meaningfully.
PERFORMANCE:
Reaction dots (when enabled) are only rendered within the most recent 500 bars to maintain chart performance. All memory calculations remain unaffected regardless of dot visibility.
---
DISCLAIMER
This indicator is provided for educational and analytical purposes only. It visualizes historical price reaction zones and does not predict future price movement, generate buy/sell signals, or constitute financial advice.
Past reactions at specific price levels do not guarantee future behavior. Market conditions change and levels that held previously may fail in the future. Always conduct your own analysis, use proper risk management, and never risk more than you can afford to lose.
The author assumes no liability for any trading decisions made using this tool. Trading involves significant risk of loss. Use this indicator as one component of a comprehensive trading approach, not as a standalone decision-making system.
---
BullByte Indicator
Intuitive Trade Regime [TraderZen]The 3D Geometry of Momentum.
Try this on your favorite chart! Every trader thinks in images. We say the market "took a turn," that price is "going sideways" .. that a breakout "jumped over resistance." We describe a selloff as a "cliff drop" and a rally as a "rapid rise." We watch price "bounce off support" or "breach the borders" of a range. These are not casual metaphors — they are how the mind actually processes price action.
This indicator is built for that visual mind. It translates the structure of price movement into shapes that feel familiar — not because they have been studied, but because they have been seen. The goal is not to add more data to the chart. It is to make what is already there easier to perceive.
The Staircase
Price does not move in lines. It moves in segments — rises and flats, drops and pauses. In structure, this is no different from a staircase. Each trend segment is a step, and the shape of that step tells a story.
The tread — the horizontal span — shows how long a regime held. A wide tread means price spent time consolidating before the next move. A narrow one means momentum carried through without pause.
The riser — the vertical face between steps — shows the magnitude of the shift. A tall riser marks a decisive regime change. A short one marks a continuation, a nudge in the same direction.
The landing — a wider, flatter segment — appears when the market pauses to establish a range before committing. It is the moment between moves where direction has not yet been decided.
And the nosing — the overshoot at each edge — reveals how aggressively price tested the boundary before accepting it.
When these elements are narrow and steep, the staircase is rickety — momentum is high but potentially unstable. When they are wide and gradual, the staircase is solid — a measured, deliberate trend. When they alternate in size, the staircase is winding — a market searching for direction.
This is not a metaphor layered onto the chart. It is what the channel segments actually form. The indicator simply makes the staircase visible.
Perspective as Information
One of the more unusual features of this indicator is its use of 3D depth — not for decoration, but for orientation.
In a downward move, the depth faces project upward and behind, as if you are standing above and looking down at the price descending below you. The top surface of each segment is visible. You see where price came from.
In an upward move, the depth reverses. The faces project downward and forward, as if you are looking up at a structure rising above you. The underside of each segment is exposed. You see the climb from below.
This is not arbitrary. It mirrors how we naturally perceive direction. Looking down implies a fall. Looking up implies a rise. The perspective reinforces the regime — making it something you feel, not just something you read from a label.
The direction of depth is fully configurable, with independent control for bull and bear segments. But the defaults are set to match this natural orientation: upward moves seen from below, downward moves seen from above.
Compression and Expansion
The width of the channel adapts to volatility. When the channel tightens, price is compressing — energy is building. When it widens, expansion is underway — the move is in progress.
In tight bear segments, the depth face breaks into a cascading waterfall pattern — stepped terraces that descend like water over ledges. This is not cosmetic. Narrow bear channels often represent rapid, liquidation-driven moves, and the waterfall texture makes that character immediately visible.
In tight bull segments, the depth face becomes jagged — an ascending cliff with rough, uneven edges. Narrow bull channels often reflect sharp, momentum-driven rallies, and the rocky texture communicates that energy at a glance.
These effects activate automatically when the channel compresses below a configurable threshold relative to ATR. When the channel is wide, the faces remain smooth and clean.
What the Channel Tells You
The mid line is the structural anchor. In Lead mode, it sits on the opposite side of price — acting as support in uptrends and resistance in downtrends, decaying slowly away from price like a trailing reference. In Follow mode, it tracks toward price, blending with the local basis.
The bands define the expected range. Price staying within the bands confirms the current regime. A confirmed break beyond the band triggers a regime change — marked by a triangle on the chart.
Retests occur when price touches the far band without conviction. These are marked with smaller arrows and often represent pullback entries within the trend.
Continuation steps fire when price pushes further in the current direction, extending the trend. Refresh events occur when a segment has aged out or drifted too far from the local basis — the channel quietly re-anchors without changing direction.
Each of these events reshapes the staircase. A regime flip starts a new step. A continuation extends the current one. A refresh adjusts the footing without changing the path.
Themes
The indicator ships with preset visual themes that configure the gradient, transparency, and 3D settings as a group:
Classic — Clean channel with gradient fills. No 3D effects. The original look for those who prefer simplicity.
Price Slabs — Solid 3D segments with depth and perspective. The staircase made tangible. Waterfall and cliff effects enabled.
Neon Glass — Translucent 3D segments with a lighter touch. The structure is visible but does not dominate the chart.
Custom — Full control over every parameter. Build your own visual language.
All themes respect your chosen colors. Switching themes changes the structure and feel — not the palette.
A Note on Design Philosophy
Most indicators ask the trader to interpret numbers. This one asks the trader to observe shapes. The thesis is simple: if the visual representation is honest — if the shapes genuinely correspond to the character of the move — then pattern recognition does what it has always done. The trader sees what is happening, and the chart stops being a puzzle to decode.
The 3D effects, the staircase structure, the perspective shifts — these are not aesthetic choices. They are attempts to give price action a physical presence on the chart, so that reading a trend feels less like analyzing data and more like watching something move.
That is what intuitive means here. Not simplified. Not dumbed down. Just shaped for the way the eye already works.
Disclaimer
This indicator is a visual analysis tool designed to aid in the interpretation of price action. It does not generate buy or sell signals, and nothing presented here constitutes financial advice, a trading recommendation, or a solicitation to trade any financial instrument. Past visual patterns do not guarantee future price behavior. All trading involves risk, including the potential loss of principal. Users are solely responsible for their own trading decisions and should consult a qualified financial advisor before acting on any information derived from this or any other technical tool. The author assumes no liability for any losses incurred through the use of this indicator.
Built by TraderZen
Indicator
Chop ShieldThe Chop Shield is an all-in-one market state indicator designed to solve the two biggest problems for intraday traders: over-trading in sideways "chop" and entering breakouts with no institutional backing.
Built specifically for high-speed environments like SPY 0DTE and Tick Charts, this script uses a multi-layered confluence of volatility, momentum, and adaptive volume to "gray out" the noise and highlight high-probability "coiled spring" releases.
### Key Features
Smart "Traffic Light" Candle Coloring:
Slate Blue (#708090): The "Neutral Zone." This triggers during volatility squeezes, low ADX (Average Directional Index), or the mid-day "Lunch Doldrums." If it’s Slate, you stay at your desk.
White/Black High-Contrast Bodies: Once the market breaks out of chop, the candles return to a clean White (Bullish) or Black (Bearish) state.
The Squeeze Engine (Orange Background):
Uses a Bollinger Band/Keltner Channel relationship to identify periods of extreme volatility contraction. These "Squeezes" are the precursor to the largest moves of the day.
High-Confidence "Pressure" Signals:
Green/Red Diamonds: These appear when a candle meets strict price action criteria (70%+ solid body, closing at extremes) paired with high relative volume.
Live Bias Arrows: "BUY/SELL" markers trigger only when the High-Confidence bar aligns with the VWAP Slope and price location.
Adaptive Session Volume (The Yellow Marker):
Standard RVOL indicators are useless at the open because volume is always high. Our Adaptive Logic uses a 2.5x threshold during the 9:30–10:15 AM window and scales down to 1.5x for the rest of the day. If you see a yellow marker, it means volume is truly abnormal for that specific time of day.
Professional Filtering:
RTH Only: Automatically hides all signals and coloring during Pre-Market and Post-Market to keep your chart clean for the opening bell.
Lunch Doldrums: Hard-coded "Gray Zone" between 11:30 AM and 1:30 PM EST to protect you from the lowest-probability trading window.
### How to Trade It
This indicator is best used as a Validation Filter for levels-based strategies (Initial Balance, ORB, or Gap Fills).
The Setup: Identify a Volatility Squeeze (Orange Background) where candles are Slate Blue.
The Trigger: Wait for the Squeeze to end and the candles to turn White or Black.
The Confirmation: Look for a Green/Red Diamond paired with an Adaptive Volume Spike (Yellow "|").
The Exit: Use the Blue VWAP Line as your dynamic trailing stop or mean-reversion target.
### Confluence
Perfect for traders using Edgeful, ICT/SMC concepts, or standard Initial Balance breakouts. It removes the "guesswork" of whether a breakout is real or a low-volume trap. Indicator
