Action

False Break Trap Planner [AGPro Series]False Break Trap Planner 🧠 Core Idea Is a breakout still holding, or is it turning into a false-break trap that deserves caution? 📌 Overview / What it does False Break Trap Planner is a chart-first breakout failure planner built to evaluate range-edge break attempts after price moves beyond a recent high or low boundary. Instead of only marking that a breakout happened, the script studies whether the move is holding beyond the edge, being reclaimed back into the range, or becoming a confirmed trap-risk context. It produces a 0-100 Trap Risk score, a reclaim state, a break-quality reading, a failure-room estimate, false-break zones, reclaim rails, and target-back guides. This script does not predict price direction, automate execution, or claim that a failed break must reverse. It organizes the anatomy of a potential false break so traders can review the setup with cleaner context. 🎯 Purpose & Design Philosophy This script was built for traders who need a practical decision layer around breakout failure, not another generic signal marker. The gap it fills is the space between a clean breakout tool and a liquidity sweep tool. Many chart tools mark a level break, a wick, or a reclaim. This planner asks what the trader should review next: is the break holding, is reclaim pressure developing, is the failure fast enough to matter, and is there room back inside the range? The design mindset is structured caution. The script helps users slow down around breakout traps, separate active risk from confirmed failure, and keep risk / target / invalidation context visible. ⚡ Why This Script Is Different Most tools focus on breakout confirmation, sweep labels, or generic failed-break signals. This script does NOT try to become a stop-hunt map, liquidity sweep engine, support/resistance zone scanner, or broad breakout system. Instead, it focuses on one specific workflow: a prior range edge is broken, the break either holds or gets reclaimed, and the planner scores whether that behavior deserves trap-risk review. ⚙️ Methodology 1. Context Detection The script maps a recent range high and range low from previous bars, then watches for an ATR-normalized break beyond either edge. 2. Reference Mapping When a break attempt appears, the planner freezes the range edge, opposite edge, midpoint, and false-break extreme so the event can be evaluated consistently. 3. Reaction Evaluation The model scores breakout failure speed, reclaim strength, wick size, volume spike, and whether price closes back inside the range. 4. Visual Output The script displays a false-break box, reclaim or fail rail, target-back line, trap confirmation labels, reclaim-watch labels, and a premium AG Pro panel. 🗺️ How to Read the Chart Zones = the active false-break box between the broken range edge and the failed extension. Labels = compact state markers such as Upper Break Watch, Lower Break Watch, Reclaim Watch, Upper Trap, Lower Trap, or Break Accepted. Colors = teal for lower-break trap recovery context, pink for upper-break trap risk, yellow for watch states, indigo for accepted/holding context, and red for confirmed trap-risk pressure. Panel = a compact decision panel showing Trap Risk, Reclaim State, Break Quality, Failure Room, and Action. 🚦 Signals & States • Upper Break Watch → price has moved beyond the upper range edge and the break is under review. • Lower Break Watch → price has moved beyond the lower range edge and the break is under review. • Reclaim Watch → price is testing back toward or inside the broken edge, but confirmation is not complete. • Trap Confirmed → the break has closed back inside the range with enough trap-risk score. • Break Holding → the break is still outside the range and has not reclaimed. • Break Accepted → the break has held beyond the acceptance window and should not be treated as an active trap by default. 🔔 Alerts Logic Alerts trigger when the planner detects confirmed upper or lower trap context, upper or lower reclaim-watch context, or break acceptance. Each alert is an attention marker. It highlights a state transition that may deserve review. It is not a trade instruction and should not be treated as an automated entry or exit signal. 🧩 Confluence Logic The strongest trap-risk context appears when several factors align: • Fast failure after the break • Close back inside the prior range • Strong wick rejection • Volume spike during the failed extension • Clean room back toward the range midpoint When these align, the panel score rises and the state becomes easier to interpret. 📊 When to Use • Breakout and breakdown attempts around a recent range • Markets where false breaks and failed continuations are common • Intraday or swing charts where range edges are visually relevant • Review workflows that need caution before chasing a break • Breakout traders who want a structured invalidation and failure-room layer ⚠️ When NOT to Use • Extremely low-liquidity instruments • Very noisy micro timeframes with unreliable candles • Markets with poor or synthetic volume data • News-driven volatility where single-bar extremes distort ATR and volume • Charts where the selected lookback does not represent a meaningful range 🎛️ Key Inputs • Range Edge Lookback → controls the prior range used for break attempts. • Minimum Break ATR → defines how far price must move beyond the edge before the planner starts tracking. • Fast Reclaim Window → controls how many bars can pass before a reclaim becomes less meaningful. • Trap Confirmed Score → minimum 0-100 score required for a confirmed trap label. • Break Acceptance Bars → defines when a break should be treated as holding rather than still failing. • Visual settings → control boxes, rails, target-back lines, label density, panel location, theme, and font sizes. 🖥️ Interface & Visual Design The panel is designed as a clean AG Pro planning cockpit. The first row uses the standard merged blue AGPro header row, followed by five decision rows. The chart visuals are intentionally focused: one active false-break box, a reclaim rail, a soft fail rail, a target-back line, and controlled labels. The goal is premium readability without turning the chart into a generic level map. 🧪 Practical Usage Workflow 1. Read the panel and check the current Reclaim State. 2. Review the false-break box and identify which edge was broken. 3. Check whether price is holding beyond the edge or closing back inside. 4. Compare Trap Risk with Break Quality. 5. Use the target-back line and failure-room reading as context, not as a forecast. 🔍 Interpretation Guidelines Think in states, not predictions. A high Trap Risk score means the attempted break has characteristics often associated with failed continuation. It does not mean the next move is guaranteed. A strong Break Quality score means the break is still showing participation and close-through behavior. In that context, early fading can be premature. The cleanest reading appears when Trap Risk is high, Break Quality is weak, and price has closed back inside the range. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a stop-hunt map • Not a liquidity sweep scanner • Not a support/resistance zone system • Not a replacement for risk planning ⚠️ Limitations & Transparency The active range depends on the selected lookback. A different lookback can produce different edges. ATR and volume conditions can change quickly during high-volatility periods, which may affect scoring. Breakout behavior differs across symbols, sessions, and timeframes. A trap-like structure on one market may not behave the same way on another. The script is rule-based and does not know external news, order flow, or hidden liquidity. 🧠 Market Context Notes False breaks often become more relevant near visible range edges, crowded breakout levels, and late-stage expansion attempts. The planner is most useful when combined with broader market context, liquidity conditions, volatility regime, and the trader's own risk rules. 🧾 Use Case Examples When price breaks above a recent range but closes back inside with a long upper wick and strong volume, the planner may mark Upper Trap context. When price breaks below a range but quickly reclaims the lower edge, the planner may shift into Lower Trap context. When price breaks and keeps closing beyond the edge after the acceptance window, the planner may mark Break Accepted instead of forcing a trap interpretation. 🧱 System Philosophy False Break Trap Planner follows the AGPro Series decision-engine direction: score the setup, identify the state, show the risk reference, show the target-back context, and make the next review step clear. The script is built to help traders make a structured chart-reading decision, not to add another isolated signal. 🔐 Non-Promise Statement No script can confirm certainty. No trap score guarantees reversal, continuation, or profitability. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own decisions, risk controls, and market interpretation. This script is for educational and analytical use only and does not provide financial advice or guaranteed trading outcomes. 📚 Educational Note Use the planner as a structured review layer around breakout failure behavior. The best value comes from comparing state, score, failure room, and broader market context together.

Indicator

Compression Breakout Readiness [AGPro Series]Compression Breakout Readiness 🧠 Core Idea Is compression mature enough for a breakout watch state, or is the range still early, noisy, or structurally weak? 📌 Overview / What it does Compression Breakout Readiness is a chart-first breakout planning tool designed to evaluate whether a compressed range has developed enough maturity to deserve active attention. Instead of printing a generic breakout signal, the script studies range contraction, ATR compression, pivot tightening, volume dry-up, directional side bias, invalidation-edge distance, and projected breakout room. These components are converted into a 0-100 Readiness Score and a clear next-action state. The script produces an active compression box, breakout watch corridor, invalidation edge, target guide, compact state labels, alerts, and a clean AGPro planning panel. It does not predict direction, automate execution, or guarantee that a breakout will follow through. 🎯 Purpose & Design Philosophy This script was built for traders who want to evaluate the quality of compression before reacting to a breakout attempt. Many breakout tools only mark the moment price crosses a level. The more useful planning question often comes earlier: is the range actually tight, mature, quiet, and biased enough to watch, or is the structure still too loose? The design supports a decision-first workflow: identify compression, measure readiness, check risk edge, review the watch side, then decide whether the chart deserves attention. ⚡ Why This Script Is Different Most tools focus on squeeze dots, breakout arrows, generic consolidation boxes, or simple high/low range breaks. This script does NOT act as a generic squeeze indicator, a choppiness filter, a support/resistance mapper, or a direct buy/sell signal generator. Instead, it evaluates compression maturity before and around the breakout edge. The main output is not a trade command. It is a readiness state that helps the user separate READY WATCH conditions from early, neutral, overheated, or invalidated compression contexts. ⚙️ Methodology 1. Context Detection The script maps the active compression range and evaluates whether current volatility and range width are contracting relative to their baselines. 2. Reference Mapping It builds the compression box, active breakout watch corridor, invalidation edge, and target guide from the current structure. 3. Reaction Evaluation The model scores range contraction, ATR compression, pivot tightening, volume dry-up, side bias, and compression age. It also checks whether the invalidation edge is too tight, too wide, or balanced. 4. Visual Output The result is shown through centered zone text, compact chart labels, clean edge lines, deterministic alerts, and a premium AGPro panel. 🗺️ How to Read the Chart Compression Box = the active range being evaluated for breakout readiness. Breakout Watch Corridor = the planning area beyond the active compression edge. Invalidation Edge = the opposite-side reference used to judge risk context. Labels = compact state markers such as READY WATCH, WATCH, EDGE REVIEW, PREMATURE, HOT RISK, and INVALID EDGE. Colors = teal for bullish watch context, pink for bearish or invalid context, amber for caution, and indigo for watch/neutral emphasis. Panel = the panel summarizes Compression Age, Readiness Score, Expansion Side, Risk Edge, and Action. 🚦 Signals & States • READY WATCH → compression is mature, biased, and risk edge distance is balanced enough for active review. • WATCH → compression is developing, but at least one readiness component remains incomplete. • EDGE REVIEW → price has moved beyond the compression edge and the user should verify the close and broader context. • PREMATURE → compression has not lasted long enough to build strong maturity. • HOT RISK → volatility has expanded too aggressively for clean readiness interpretation. • NO BIAS → compression exists, but the directional side is not clear enough in Auto mode. • INVALID EDGE → price crossed the active invalidation edge and the prior context may need reset. 🔔 Alerts Logic Alerts trigger when the planner enters READY WATCH, WATCH, EDGE REVIEW, HOT RISK, or INVALID EDGE state. These alerts are attention markers. They are not trade instructions, entry signals, broker actions, or automated strategy commands. 🧩 Confluence Logic The strongest readiness state appears when multiple components align: Range contraction + ATR compression + pivot tightening + volume dry-up + directional side bias + balanced risk edge. When those components improve together, the score can rise toward READY WATCH. If volatility becomes too hot, risk becomes distorted, or the active edge fails, the state downgrades. 📊 When to Use • Before evaluating a possible breakout setup • During narrow ranges where volatility is compressing • Around coiling structures that need maturity review • When comparing whether one compression range is cleaner than another • On liquid symbols where range, ATR, and volume behavior are meaningful ⚠️ When NOT to Use • Extremely low-liquidity markets • Highly noisy micro-timeframes • News-driven volatility spikes • Symbols with unreliable or missing volume data • Situations where the user wants a simple breakout arrow or automated trade signal 🎛️ Key Inputs • Breakout Watch Side → selects Auto, Bullish Watch, or Bearish Watch evaluation. • Compression Lookback → defines the active range used for readiness scoring. • ATR Baseline → controls volatility compression comparison. • Volume Dry-Up Length → evaluates whether participation is contracting inside compression. • Minimum Compression Age → controls how mature a range must be before stronger readiness states appear. • READY / WATCH Thresholds → adjust how selective the planner is. • Visual settings → control compression box, breakout corridor, range edges, invalidation edge, projection length, labels, and candle tint. • Panel settings → control panel visibility, location, theme, and font size. 🖥️ Interface & Visual Design The interface is intentionally chart-first. The compression box uses centered text so the user can read score and age directly inside the structure. The breakout corridor provides a clean forward planning reference without filling the chart with many competing levels. The AGPro panel uses a single merged blue header row and a compact five-row decision layout. Label and panel font sizes are adjustable, with Normal as the default. 🧪 Practical Usage Workflow 1. Read the panel Readiness Score and Action. 2. Check whether the compression box is mature or premature. 3. Review the Expansion Side and breakout watch corridor. 4. Compare the Risk Edge with the visible structure. 5. Treat labels and alerts as review prompts, not trade commands. 🔍 Interpretation Guidelines A higher score means the script sees stronger compression maturity according to its rule set. READY WATCH does not mean price must break out. It means the compression context is organized enough to deserve attention. WATCH means the structure may be developing but is not fully mature. HOT RISK and INVALID EDGE are caution states. They warn that the range may no longer be clean enough for the same readiness read. 🚫 What This Script Is NOT This script is not a prediction engine. It is not financial advice. It is not an auto-trading system. It does not provide guaranteed signals. It is not a generic squeeze indicator. It is not a choppiness dashboard. It is not a support/resistance scanner. It is not a direct breakout entry tool. ⚠️ Limitations & Transparency Compression quality depends on the selected lookback, timeframe, volatility baseline, and market condition. Volume dry-up may be less reliable on symbols with inconsistent exchange volume. Fast volatility expansion can quickly change the readiness state. Different timeframes can show different compression ranges and side-bias context. The script is rule-based and should be interpreted as an analytical planning layer, not as certainty. 🧠 Market Context Notes Compression by itself is not enough. A useful breakout watch context also needs maturity, reduced noise, a readable side, and a practical invalidation edge. This script keeps those elements visible so users can review breakout readiness before reacting emotionally to a candle crossing a range edge. 🧾 Use Case Examples When a range contracts, ATR falls below baseline, volume dries up, and side bias becomes clear, the planner may move toward WATCH or READY WATCH. When price pushes beyond the edge while readiness is acceptable, the script can mark EDGE REVIEW so the user can verify the close and broader context. When ATR expands too aggressively before structure is mature, the planner can show HOT RISK instead of treating every move as a clean breakout context. 🧱 System Philosophy Compression Breakout Readiness follows the AGPro Series decision-engine approach: Context first. Readiness before reaction. Risk edge before target guide. Attention markers instead of promises. 🔐 Non-Promise Statement No script can remove uncertainty. No state, score, label, alert, box, corridor, or line should be interpreted as guaranteed market direction. 📉 Risk Disclosure Trading involves risk. All decisions remain the responsibility of the user. This script is for educational and analytical chart review only and does not provide financial advice. 📚 Educational Note Use the script to study how compression matures, weakens, breaks, or invalidates around range edges. The strongest reading comes from combining the panel state with the visible chart structure and broader market context.

Indicator

Risk Exposure Compass [AGPro Series]Risk Exposure Compass 🧠 Core Idea Is the current chart exposing the trader to balanced risk, or is price already stretched, blocked, or too early? 📌 Overview / What it does Risk Exposure Compass is a chart-first risk planning tool designed to evaluate the current exposure quality of a setup before the trader treats it as actionable. Instead of printing generic buy or sell signals, the script studies ATR stretch, range position, distance from the exposure mean, trend maturity, target-edge room, and invalidation distance. These components are converted into a 0-100 Risk Exposure Score and a clear next-action state. The script produces a risk compass band, invalidation shelf, target-edge guide, exposure heat labels, alerts, and a clean AGPro planning panel. It does not predict price direction, automate execution, calculate position size, or guarantee that a setup will follow through. 🎯 Purpose & Design Philosophy This script was built for traders who want to ask a practical pre-decision question: is the chart still offering clean exposure, or has the move become too stretched to evaluate cleanly? The gap it fills is different from a manual risk/reward visualizer, position planner, or risk runway tool. Risk Exposure Compass focuses on the current chart location itself: how far price is from mean, how mature the move is, whether volatility load is normal, whether target room is open, and whether invalidation distance is controlled. The design supports a disciplined review mindset. It helps users avoid treating every active move as equal by separating balanced exposure, watch context, stretched risk, blocked room, and reset conditions. ⚡ Why This Script Is Different Most tools focus on entries, support/resistance zones, take-profit ladders, or manual risk/reward boxes. This script does NOT build a full trade plan, does NOT calculate position size, does NOT create a TP ladder, and does NOT become a dashboard-only stress meter. Instead, it draws a live risk compass directly on the chart and scores whether the current price location is balanced, extended, blocked by nearby target structure, or too early for clean planning. ⚙️ Methodology 1. Context Detection The script reads automatic long-side or short-side exposure using mean and trend context, or lets the user force the exposure side manually. 2. Reference Mapping It maps an exposure mean, active range, structural invalidation shelf, target-edge obstruction, and a projected compass band. 3. Reaction Evaluation The model scores five core components: ATR stretch, range position, distance from mean, trend maturity, and target obstruction. Invalidation distance and volatility load refine the final state. 4. Visual Output The output is shown through a centered compass band label, invalidation and target guide lines, compact exposure labels, deterministic alerts, and a premium AGPro panel. 🗺️ How to Read the Chart Zones = the risk compass band where price is considered more balanced relative to the active exposure mean. Labels = compact state markers showing BALANCED, WATCH, STRETCHED, BLOCKED, or RESET context. Colors = teal marks cleaner exposure, pink marks blocked or failed context, amber marks stretched risk, and indigo marks watch or transition states. Panel = the panel summarizes Exposure State, Risk Score, Volatility Load, Distance Risk, and Action. 🚦 Signals & States • BALANCED → exposure is inside the compass band with a strong enough score. • WATCH → exposure quality is developing but not yet clean enough for balanced status. • STRETCHED → price is extended from mean, late in range position, volatility is overloaded, or invalidation distance is too wide. • BLOCKED → nearby target-edge room is limited relative to current exposure. • RESET → the chart is early, unclear, or below the minimum quality threshold. 🔔 Alerts Logic Alerts trigger when exposure moves into BALANCED, WATCH, STRETCHED, BLOCKED, or RESET state. These alerts are attention markers. They are not trade instructions, entry signals, exit signals, or automated strategy commands. 🧩 Confluence Logic The strongest exposure context appears when ATR stretch is controlled, price is not at an extreme range edge, distance from mean is balanced, trend maturity is not too early or too late, and target room remains open. When these conditions align, the Risk Exposure Score rises and the panel state becomes easier to interpret. 📊 When to Use • Before evaluating a discretionary setup • During pullbacks or pauses where risk location matters • Around continuation attempts after a trend has already moved • Before breakouts where price may already be extended • When comparing whether one chart has cleaner exposure than another ⚠️ When NOT to Use • Extremely low-liquidity symbols • Very noisy micro-timeframes • News-driven volatility spikes • Non-standard chart types that distort candle range and ATR behavior • Situations where the user expects a signal-only entry tool 🎛️ Key Inputs • Exposure Side → controls Auto, Long Exposure, or Short Exposure evaluation. • Range Lookback → defines the range used for price-location scoring. • ATR Length → normalizes stretch, distance risk, target room, and label offsets. • Exposure Mean EMA → defines the mean used for the compass band and distance scoring. • Target Obstruction Lookback → controls how nearby target-edge room is estimated. • Invalidation Shelf Lookback → controls the structural invalidation reference. • Sensitivity → adjusts how strict the exposure model is. • Visual settings → control compass band, guides, candle heat, labels, panel location, theme, and font sizes. 🖥️ Interface & Visual Design The interface is built around one primary chart object: the risk compass band. The panel follows the AGPro public-release standard with one merged blue header row containing only the script name. The rows are kept compact so the tool stays readable without becoming dashboard-heavy. Labels are intentionally short, offset away from candles, and controlled with cooldown and maximum-visible settings. 🧪 Practical Usage Workflow 1. Read the panel Exposure State and Risk Score. 2. Check whether price is inside, below, or beyond the risk compass band. 3. Review Distance Risk to see whether invalidation is controlled, fragile, or too wide. 4. Check target-edge room before treating exposure as clean. 5. Use alerts as review prompts, not as automated trading instructions. 🔍 Interpretation Guidelines A high score means the chart is closer to balanced exposure according to the script's rule-based model. A low score means price may be too early, too stretched, blocked by nearby structure, or unclear relative to mean and range position. The best interpretation comes from reading score, state, volatility load, distance risk, and target room together instead of relying on one label. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a position sizing calculator • Not a manual risk/reward visualizer • Not a take-profit ladder ⚠️ Limitations & Transparency The model is rule-based and depends on recent structure, ATR, moving averages, candle range, and target-edge mapping. Different timeframes can produce different exposure states because range, trend maturity, and invalidation shelves change with timeframe. Fast volatility expansion can move the script quickly from balanced to stretched, while low-volatility environments can keep exposure in reset or watch state for longer. No rule-based tool can know a user's actual execution plan, account risk, broker rules, or broader market thesis. 🧠 Market Context Notes Risk exposure is not the same as direction. A chart can be bullish but stretched, bearish but blocked, or directionally interesting while still offering poor exposure quality. This script is designed to keep that distinction visible. 🧾 Use Case Examples When price is above the exposure mean, inside the compass band, with controlled invalidation distance and enough target room, the panel can shift toward BALANCED. When price accelerates far beyond the compass band with hot volatility and a late range position, the script can mark STRETCHED risk. When price is close to a prior target edge and the room score is weak, the script can mark BLOCKED even if the broader trend still looks strong. 🧱 System Philosophy The AGPro approach is to turn chart information into structured decision context. Risk Exposure Compass follows that approach by converting price location into a cleaner review framework: mean, range, volatility, invalidation, target room, score, and next state. 🔐 Non-Promise Statement This script does not provide certainty. It does not guarantee that balanced exposure will lead to follow-through. It only organizes current chart conditions so exposure quality is easier to review. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own analysis, execution, risk management, and decisions. This script is for educational and analytical purposes only and does not provide financial advice. 📚 Educational Note Use the tool to study how price moves from reset to watch, from watch to balanced, and from balanced to stretched or blocked as market context changes.

Indicator

Invalidation Quality Planner [AGPro Series]Invalidation Quality Planner 🧠 Core Idea Is the active invalidation shelf meaningful enough to build a plan around, or is it fragile, distant, weak, or already violated? 📌 Overview / What it does Invalidation Quality Planner is a chart-first risk planning tool designed to evaluate the quality of the level that would invalidate a setup idea. Instead of drawing generic support/resistance zones or printing buy/sell signals, the script studies one active invalidation shelf and converts its structure into a 0-100 quality score. It measures swing clarity, defended reactions, prior violations, wick pressure, volatility buffer, forward room, and violation risk. The output is a focused planning workflow: an invalidation shelf zone, shelf and violation guides, forward-room reference, compact event labels, alerts, and a clean AGPro decision panel. It does not predict future price movement, automate decisions, or guarantee that any shelf will hold. 🎯 Purpose & Design Philosophy This script was built for traders who want to judge whether their risk reference is structurally meaningful before relying on it. Many tools show entries, targets, support/resistance zones, or stop distances. This tool focuses on the deeper planning question: is the invalidation level itself strong enough to deserve trust? The design supports a disciplined setup-review mindset. It helps users separate a clean invalidation shelf from a weak, noisy, overextended, or already violated one. ⚡ Why This Script Is Different Most tools focus on signals, stop-loss placement, support/resistance mapping, or risk/reward drawings. This script does NOT become a generic S/R zone map, a stop-loss optimizer, a position-size calculator, a target ladder, or an entry signal tool. Instead, it evaluates the quality of the invalidation reference. The core output is not a trade command. It is a planning state that helps users decide whether the current shelf is VALID, on WATCH, FRAGILE, DISTANT, DEFENDED, WEAK, or VIOLATED. ⚙️ Methodology 1. Context Detection The script detects the active planning side using trend context and range location, or allows the user to force long-context or short-context evaluation. 2. Reference Mapping It maps the active invalidation shelf from confirmed swing pivots, with a fallback structure reference when no fresh pivot is available. 3. Reaction Evaluation The model scores swing clarity, defended shelf reactions, clean history, wick pressure, ATR-normalized shelf distance, volatility context, violation risk, and forward room. 4. Visual Output The output is shown through an invalidation shelf zone, violation guide, forward-room guide, compact labels, deterministic alerts, and a premium AGPro panel. 🗺️ How to Read the Chart Zones = the active invalidation shelf used by the planner. It is a risk reference, not a generic support/resistance zone. Labels = compact state markers showing VALID, WATCH, DEFENDED, FRAGILE, DISTANT, WEAK, or VIOLATED context. Colors = teal marks cleaner planning context, pink marks violation or weak context, amber marks caution, and indigo marks watch/transition context. Panel = the panel summarizes Invalidation Quality, Distance, Structure Support, Violation Risk, and Action. 🚦 Signals & States • VALID → the active invalidation shelf has enough structure and quality to deserve review. • WATCH → the shelf is improving but not clean enough for VALID state. • DEFENDED → price tested the shelf and closed back in favor of the active planning side. • FRAGILE → price is too close to the shelf, making normal noise more important. • DISTANT → the shelf is too far from price for clean planning context. • WEAK → the shelf lacks enough structure, reaction memory, or clean history. • VIOLATED → price crossed the active violation guide and the context should be rebuilt. 🔔 Alerts Logic Alerts trigger when the planner enters VALID state, enters WATCH state, detects a defended shelf reaction, marks a weak/fragile/distant shelf, or detects a shelf violation. These alerts are attention markers. They are not trade instructions, entry signals, exit commands, or automated strategy actions. 🧩 Confluence Logic The strongest invalidation context appears when swing clarity, defended reactions, clean violation history, controlled wick pressure, balanced ATR distance, and sufficient forward room align. When those factors align, the quality score rises and the panel can move from WATCH to VALID. If the shelf becomes too close, too distant, noisy, or violated, the state downgrades. 📊 When to Use • Before evaluating a discretionary setup • During pullbacks where a structural invalidation shelf is forming • Around continuation setups where risk needs a clean reference • Before breakout or reclaim attempts where the failure point matters • When comparing whether one setup has a cleaner invalidation reference than another ⚠️ When NOT to Use • Extremely low-liquidity symbols • Very noisy micro-timeframes with unstable wicks • News-driven volatility spikes • Markets where recent structure is distorted and no useful invalidation shelf exists • Situations where the user expects a signal-only entry tool 🎛️ Key Inputs • Planning Side → controls Auto, Long Context, or Short Context evaluation. • Shelf Pivot Left / Right → controls how strict the confirmed swing shelf detection is. • Shelf Fallback Lookback → defines the backup structure reference when no fresh pivot exists. • Reaction Memory Lookback → controls how far back defended reactions and violations are counted. • Shelf Zone Buffer ATR → controls the width of the invalidation shelf zone. • Violation Buffer ATR → controls when price is treated as crossing beyond the shelf. • VALID / WATCH Thresholds → adjust how selective the planner is. • Visual settings → control shelf zones, guide lines, memory zones, labels, panel location, theme, and font sizes. 🖥️ Interface & Visual Design The interface is built around one primary chart object: the invalidation shelf zone. The panel follows the AGPro public-release standard with one merged blue header row containing only the script name. The layout keeps the key planning information readable without turning the script into a dashboard-heavy overlay. Labels are compact, offset away from candles, and controlled with cooldown and maximum-visible settings. 🧪 Practical Usage Workflow 1. Read the panel Invalidation Quality and Action state. 2. Check whether price is respecting, approaching, or violating the shelf zone. 3. Review the Distance row to see whether the shelf is balanced, fragile, or distant. 4. Compare Structure Support with Violation Risk. 5. Treat alerts as review prompts and confirm the broader market context before making any decision. 🔍 Interpretation Guidelines A higher score means the planner sees stronger alignment between shelf structure, reaction memory, clean history, distance quality, violation risk, and forward room. VALID does not mean a trade must be taken. It means the invalidation shelf is meaningful enough to deserve attention. WATCH means the shelf may be developing but still needs stronger evidence. FRAGILE, DISTANT, WEAK, and VIOLATED are caution states that help users avoid building a plan around a poor invalidation reference. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a generic support/resistance mapper • Not a stop-loss optimizer • Not a position sizing calculator • Not a take-profit planner ⚠️ Limitations & Transparency Pivot-based shelves are confirmed after the selected pivot strength completes, so the script is intentionally reactive rather than predictive. Different timeframes can create different shelf references, reaction counts, and violation-risk readings. Volatility changes can alter ATR-normalized distance, shelf width, and forward-room conditions. The script is rule-based and should be interpreted as an analytical planning layer, not as certainty. 🧠 Market Context Notes Invalidation quality is not only about distance. A shelf can be close but meaningful, distant but inefficient, or visually obvious but already weakened by violations. The planner is most useful when it helps the user ask better questions before trusting a setup idea. 🧾 Use Case Examples When price pulls back toward a clean swing shelf, defends it, and still has enough forward room, the planner may show DEFENDED or VALID context. When price is sitting directly on the shelf with heavy wick pressure, the planner may mark FRAGILE even if the level looks visually interesting. When price crosses beyond the violation guide, the planner marks VIOLATED so the old risk reference is not treated as still clean. 🧱 System Philosophy Invalidation Quality Planner follows the AGPro Series decision-engine approach: Context first. Risk reference before target. Structure before signal. Attention markers instead of promises. 🔐 Non-Promise Statement No indicator can remove uncertainty. No state, score, label, alert, or visual zone should be interpreted as guaranteed market direction. 📉 Risk Disclosure Trading involves risk. All decisions remain the responsibility of the user. This script is for educational and analytical chart review only and does not provide financial advice. 📚 Educational Note Use the tool to study how invalidation references form, defend, weaken, or fail across different market conditions.

Indicator

R-Multiple Progress Map [AGPro Series]R-Multiple Progress Map 🧠 Core Idea How far has the active move progressed in R terms, and is that progress still healthy enough to monitor? 📌 Overview / What it does R-Multiple Progress Map is a chart-first trade management overlay that tracks a setup after activation and converts price movement into R-multiple progress. Instead of acting like a risk/reward calculator, a position sizing tool, or a take-profit promise system, the script focuses on what happens after an active cycle begins. It maps an entry proxy, invalidation proxy, R ladder, current R marker, partial-review bands, pullback-risk state, and a clean AGPro progress panel. The script does not predict future price movement, place orders, automate trade management, or tell the user what to buy or sell. It is a structured progress-reading layer for discretionary review. 🎯 Purpose & Design Philosophy This script was built for traders who think in R-multiples but need a cleaner way to read progress quality after a setup becomes active. Many tools help plan the trade before activation. Fewer tools focus on the management question after activation: is the move actually making progress, is pullback pressure increasing, where is the next R review zone, and what should the user pay attention to now? The design supports a decision-engine mindset: measure progress, evaluate health, and keep the chart readable without turning it into a crowded signal board. ⚡ Why This Script Is Different Most tools focus on drawing entry, stop-loss, and take-profit levels before a trade begins. This script does NOT try to become a full position planner, risk/reward visualizer, position-size calculator, or target ladder. Instead, it starts from an activated progress cycle and evaluates the move in R terms. The unique output is not a trade instruction. It is a live progress state that separates ACTIVE, BUILDING, PROGRESSING, EXTENDED, PULLBACK RISK, STALLED, INVALIDATED, and WAIT conditions. ⚙️ Methodology 1. Context Detection The script detects activation using range-break and trend-pulse logic, or allows the user to restrict the map to long-only or short-only progress context. 2. Reference Mapping When a progress cycle activates, the script stores an entry proxy, invalidation proxy, R-risk unit, active side, active bar, maximum favorable R progress, and adverse R pressure. 3. Reaction Evaluation The model evaluates R expansion, candle progress, trend support, drawdown pressure, time efficiency, and volatility stability. These components are blended into a 0-100 progress score. 4. Visual Output The output is shown through an R ladder, centered partial-review bands, live progress fill, current R marker, event labels, alerts, and a compact AGPro panel. 🗺️ How to Read the Chart Zones = partial-review R bands between key R levels, such as 0.5R-1R, 1R-2R, and 2R-3R. Labels = activation, R milestone, pullback-risk, stalled-progress, and invalidation markers. Colors = bullish progress, bearish progress, warning states, and neutral states use the AGPro color language. Panel = the panel summarizes Current R, Progress Grade, Pullback Risk, Next R Zone, and Action. 🚦 Signals & States • ACTIVE → a new progress cycle has activated and early R progress is being measured. • BUILDING → price has started to make useful R progress but is not yet strong enough for a higher-grade state. • PROGRESSING → the move has reached meaningful R progress with supportive score conditions. • EXTENDED → progress is advanced and the next R zone deserves review. • PULLBACK RISK → price has given back enough favorable R progress to deserve caution. • STALLED → the active cycle has spent time without enough R progress. • INVALIDATED → the active cycle touched the invalidation proxy. • WAIT → no active progress cycle is currently being tracked. 🔔 Alerts Logic Alerts trigger when a new progress cycle activates, when 0.5R, 1R, or 2R progress is reached, when pullback risk increases, when progress stalls, or when the invalidation proxy is touched. These alerts are attention markers. They are not trade instructions, entry signals, exit signals, or automated strategy commands. 🧩 Confluence Logic The strongest progress context appears when multiple components align: R expansion + strong candle progress + trend support + controlled pullback drawdown + efficient timing + stable volatility. When these components align, the script can classify the active move as PROGRESSING or EXTENDED. If drawdown pressure rises or time efficiency weakens, the state can shift toward PULLBACK RISK or STALLED. 📊 When to Use • After a breakout or continuation attempt has activated • While monitoring whether a setup is progressing in clean R terms • During discretionary trade management review • When comparing whether a move is building, stalling, or extending • When the user wants chart-first R progress without a full position-size calculator ⚠️ When NOT to Use • Extremely low-liquidity symbols • Very noisy micro-timeframes with unstable wick behavior • News-driven volatility spikes • Markets where recent structure cannot define a useful invalidation proxy • Situations where the user expects a complete risk/reward planning suite 🎛️ Key Inputs • Progress Side → controls Auto, Long Progress, or Short Progress evaluation. • Activation Mode → chooses Range Break, Trend Pulse, or Hybrid activation logic. • Structure Lookback → defines the activation and context window. • Invalidation Proxy Lookback → maps the R-risk reference used for progress normalization. • Minimum Activation Score → controls how selective new progress cycles are. • Pullback Risk R → defines how much R drawdown triggers caution. • Visual settings → control R ladder, partial-review bands, progress fill, labels, panel location, theme, and font sizes. 🖥️ Interface & Visual Design The interface is built around one primary idea: R progress after activation. The R ladder and partial-review bands keep the chart visually informative, while the panel keeps the decision state compact and readable. Labels are offset away from candles, limited by maximum count, and controlled with cooldown and sparse context settings for a balanced public-release chart. 🧪 Practical Usage Workflow 1. Read the panel action state. 2. Check the current R and maximum R progress. 3. Review whether pullback risk is low, moderate, or high. 4. Look at the next R zone for management context. 5. Treat alerts as attention markers and confirm the broader market context independently. 🔍 Interpretation Guidelines A higher progress score means the active move is showing stronger alignment between R expansion, trend support, drawdown control, time efficiency, and volatility stability. PROGRESSING does not mean a trade should be opened or held. It means the active cycle is showing healthier R progress under the script's rule set. PULLBACK RISK and STALLED are caution states. They help identify when progress may be weakening after an active move has already started. 🚫 What This Script Is NOT This script is not a prediction engine. It is not financial advice. It is not an auto-trading system. It does not provide guaranteed signals. It is not a full position planner, risk/reward visualizer, or position-size calculator. ⚠️ Limitations & Transparency Timeframe differences can change activation behavior and invalidation proxy placement. Volatility changes can alter ATR-normalized risk and R-progress readings. Market structure can shift quickly after news, low-liquidity movement, or aggressive momentum expansion. The script is rule-based and should be interpreted as an analytical progress layer, not as certainty. 🧠 Market Context Notes R progress is not only about distance from activation. It also depends on how much progress is being retained, whether trend context still supports the active side, and whether time spent in the setup is becoming inefficient. The tool is most useful when it helps the user review an active move with discipline instead of reacting emotionally to each candle. 🧾 Use Case Examples When a trend-pulse activation reaches 1R with strong score conditions and low drawdown, the script may classify the move as PROGRESSING. When a move reaches 2R but begins giving back a meaningful amount of favorable progress, the script may show PULLBACK RISK. When a cycle stays active for many bars without reaching useful R progress, the script may show STALLED. 🧱 System Philosophy R-Multiple Progress Map follows the AGPro Series decision-engine approach: Progress after activation. Risk measured in R. Management context before emotion. Attention markers instead of promises. 🔐 Non-Promise Statement No script can guarantee that R progress will continue. No state should be interpreted as certainty. All outputs should be reviewed within broader market context. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own decisions, risk management, and trade execution. This script is for educational and analytical purposes only and does not provide financial advice. 📚 Educational Note The script is designed to help users think in structured R-progress terms: activation, progress, pullback, stall, invalidation, and review.

Indicator

Reward Room Analyzer [AGPro Series]Reward Room Analyzer 🧠 Core Idea Does the chart offer enough clean reward room before the next major obstacle? 📌 Overview / What it does Reward Room Analyzer is a chart-overlay planning tool designed to evaluate whether the current price area has enough practical space before the next meaningful obstacle. Instead of projecting a take-profit ladder or calculating position size, the script studies the distance from current price to the nearest target-side obstacle, the opposite invalidation reference, room-to-risk ratio, trend support, clean-air structure, and volatility fit. These inputs are converted into a 0-100 Reward Room Score with a clear state such as Open Room, Watch Room, Thin Room, Blocked Path, Risk Heavy, or No Room. The script produces a forward reward room corridor, nearest obstacle rail, invalidation reference rail, compact chart labels, alert conditions, and a clean AGPro planning panel. It does not predict price movement, automate execution, or promise that any target will be reached. 🎯 Purpose & Design Philosophy This script was built to solve a common planning problem: a setup can look attractive, but the path ahead may already be blocked by nearby structure, poor room-to-risk, or excessive invalidation distance. Reward Room Analyzer helps traders review the quality of the space ahead before treating a setup as actionable. It supports a planner mindset: check the available room, identify the obstacle, compare room against risk, and then decide whether the chart deserves more attention. It is designed for traders who care about trade planning, target path quality, risk awareness, and cleaner decision structure rather than another generic signal marker. ⚡ Why This Script Is Different Most tools focus on drawing take-profit levels, R-multiple ladders, Fibonacci extensions, or basic risk/reward boxes. This script does NOT build a TP ladder, position-size calculator, profit tracker, or entry signal system. Instead, it asks a narrower decision question: is there enough clean reward room before the next obstacle, or is the path already too thin, blocked, or risk-heavy? ⚙️ Methodology 1. Context Detection The script selects the active target side using Auto Side, Long Room, or Short Room. Auto Side weighs trend support and available room. 2. Reference Mapping It maps confirmed obstacle pivots, the nearest target-side rail, the opposite invalidation reference, and ATR-normalized reward room. 3. Reaction Evaluation It scores the room using distance to obstacle, room-to-risk ratio, clean-air structure, trend agreement, risk distance, and volatility fit. 4. Visual Output It displays the active reward corridor, centered corridor label, obstacle/invalidation rails, compact labels, alerts, and an AGPro panel. 🗺️ How to Read the Chart Reward Room Corridor = the forward space between current price and the nearest target-side obstacle. Nearest Obstacle Rail = the first meaningful structural barrier in the selected target direction. Invalidation Reference = the opposite-side reference used to estimate risk distance. Labels = compact state markers showing the current reward-room condition and score. Colors = teal and indigo suggest stronger room quality, amber suggests caution, and pink/red suggests weak or blocked room. Panel = summarizes reward score, reward room, obstacle, room-to-risk, target side, and next action. 🚦 Signals & States • Open Room → reward room is wide enough, room-to-risk is acceptable, and risk is not excessive. • Watch Room → context is acceptable but not strong enough for the open-room state. • Thin Room → the nearest obstacle is too close. • Blocked Path → room-to-risk is weak relative to the invalidation reference. • Risk Heavy → invalidation distance is too large compared with the available room. • No Room → conditions are not strong enough for planning attention. 🔔 Alerts Logic • Open Reward Room → triggers when the script enters the Open Room state. • Watch Reward Room → triggers when watchable room appears without reaching Open Room. • Blocked Reward Path → triggers when room-to-risk becomes structurally blocked. • Thin Reward Room → triggers when the nearest obstacle is too close. • Risk Heavy Room → triggers when invalidation distance is heavy relative to room. Alerts are attention markers. They are not trade instructions. 🧩 Confluence Logic Reward room quality improves when the target-side distance, room-to-risk ratio, clean-air structure, trend agreement, balanced risk distance, and stable volatility align. The strongest read appears when the corridor is visibly open and the panel confirms sufficient room with a strong score.

Indicator

Trade Location Quality [AGPro Series]Trade Location Quality 🧠 Core Idea Is price in a clean trade location, or is it too close to obstruction, invalidation, or noisy range edges? 📌 Overview / What it does Trade Location Quality is a chart-overlay risk-location planner designed to evaluate whether the current price area is practical for setup review. The script measures range position, nearby obstruction rails, ATR-normalized risk distance, target room, trend support, and volatility fit. These inputs are combined into a 0-100 Location Quality Score with a clear state such as Clean Location, Watch Location, Obstructed, Danger Close, Risk Wide, or Poor Location. It produces a forward location window, target/risk rails, compact event labels, alert conditions, and a premium AGPro panel. It does not predict price direction, automate execution, or print direct buy/sell commands. 🎯 Purpose & Design Philosophy This script was built to solve a common planning problem: a setup may look interesting, but the trade location may still be weak because price is too stretched, too close to the next obstacle, or too close to invalidation. The goal is to help traders think in terms of location quality before reacting to a setup. It supports a planning mindset: check context, evaluate room, review risk, then decide whether the area deserves attention. It is designed for traders who want a clean decision layer rather than another generic signal marker. ⚡ Why This Script Is Different Most tools focus on detecting a level, zone, breakout, or signal. This script does NOT build a premium/discount map, OTE model, generic support/resistance scanner, order-block map, or prediction engine. Instead, it asks a narrower planning question: is the current location clean enough to evaluate, or is the chart already blocked by risk, obstruction, or poor range position? ⚙️ Methodology 1. Context Detection The script identifies the active evaluation side using either Auto Context, Long Context, or Short Context. Auto Context follows the trend-support basis. 2. Reference Mapping It maps the recent range, nearest obstruction rails, opposite-side risk rail, estimated invalidation reference, and ATR-normalized room. 3. Reaction Evaluation It scores location quality using range position, target room, risk distance, trend support, and volatility fit. 4. Visual Output It displays a forward location window, target/risk rails, state labels, alerts, and a compact AGPro panel. 🗺️ How to Read the Chart Location Window = the current area where price location is being evaluated. Target Obstruction Rail = the nearest meaningful obstacle in the evaluation direction. Risk Rail = the opposite-side reference used to estimate invalidation distance. Labels = compact state markers showing the current planner condition and score. Colors = teal and indigo suggest stronger quality, amber suggests caution, and pink/red suggests weak or risky location. Panel = summarizes score, state, range position, obstruction distance, risk state, and next action. 🚦 Signals & States • Clean Location → location score is strong, room is sufficient, and risk distance is balanced. • Watch Location → context is acceptable but not strong enough for the clean-location state. • Obstructed → price is too close to the next target-side obstruction rail. • Danger Close → invalidation is too close for a balanced location read. • Risk Wide → invalidation is too far away, making the location less efficient. • Poor Location → score and context are not strong enough for planning attention. 🔔 Alerts Logic • Clean Location → triggers when the script enters the Clean Location state. • Obstructed Location → triggers when price becomes too close to the next obstruction rail. • Risk Location Warning → triggers when risk distance becomes too tight or too wide. • Watch Location → triggers when a watchable location context appears without reaching Clean Location. Alerts are attention markers. They are not trade instructions. 🧩 Confluence Logic Location quality improves when range position, target room, balanced risk distance, trend support, and stable volatility align. The strongest read appears when the score is high and the panel also shows enough obstruction distance with a balanced risk state. 📊 When to Use • During setup planning before reacting to a signal. • Around pullbacks where risk and target room matter. • During trend continuation review when price may be clean or already stretched. • Before breakout or reversal evaluation when nearby obstruction can change the quality of the idea. • On liquid markets where ATR and pivot references are meaningful. ⚠️ When NOT to Use • Extremely low-liquidity markets with unreliable candles. • Highly noisy periods where rails change too frequently. • Extreme volatility spikes where ATR-based distance can expand rapidly. • Charts where the user has no broader context for directional evaluation. • As a standalone reason to enter or exit a trade. 🎛️ Key Inputs • Evaluation Context → selects Auto, Long, or Short planning context. • Location Lookback → defines the recent structure window. • Obstruction Pivot Length → controls how strict obstruction rails are. • Minimum Clean Score → sets the quality threshold for Clean Location. • Minimum Target Room ATR → controls how much room must exist before the next obstruction. • Risk Buffer Inputs → define what counts as too close or too wide. • Visual Settings → control compact or detailed labels, rails, location window, panel visibility, theme, location, and font sizes. 🖥️ Interface & Visual Design The interface is intentionally chart-first. The location window shows the active evaluation area without filling the chart with many competing zones. The obstruction rails provide practical reference points. The default labels use compact state tags, while hover tooltips retain the deeper score, room, risk, and action context. Cooldown and maximum-visible settings keep the chart active but not crowded. The panel follows the AGPro publication layout with a single merged blue title row, adjustable location, adjustable theme, and adjustable font size. 🧪 Practical Usage Workflow 1. Read the panel score and state. 2. Check whether target-side room is open or obstructed. 3. Review whether risk distance is balanced, too close, or too wide. 4. Compare the location window with broader market context. 5. Treat alerts and labels as attention markers, not decisions. 🔍 Interpretation Guidelines A high score means the location is cleaner relative to the script's rule set. It does not mean price must move in the evaluated direction. An obstructed state means room is limited before the next nearby reference. It does not mean price cannot break through that area. A risk warning means the current location is less balanced for planning. It should be interpreted with timeframe, volatility, and broader structure. 🚫 What This Script Is NOT • Not a prediction engine. • Not financial advice. • Not auto trading. • Not guaranteed signals. • Not a buy/sell signal service. • Not a premium/discount or OTE zone engine. • Not a generic support/resistance zone scanner. ⚠️ Limitations & Transparency Location quality depends on the selected lookback, pivot length, volatility profile, and timeframe. Different markets can produce different rail behavior. High volatility may widen risk distance. Low volatility may compress target room. Small timeframes may produce more frequent state changes. The script is rule-based and should be read as a planning tool inside broader analysis. 🧠 Market Context Notes Trade location is not only about where price is. It is also about what sits nearby. A location can look attractive but still be weak if there is not enough clean room before the next obstruction. A location can also be risky if invalidation is too close or too far for the current volatility environment. This script organizes those conditions into a single readable decision layer. 🧾 Use Case Examples When price pulls back inside a trend and the score improves while risk remains balanced, the chart may deserve closer review. When price is near a target-side rail and the panel shows Obstructed, the user can recognize that nearby room is limited. When volatility expands and risk distance becomes too wide, the script can mark the location as less efficient for planning. 🧱 System Philosophy Trade Location Quality follows the AGPro decision-engine approach: the script should help the user evaluate context, quality, risk, room, and next action without promising an outcome. The goal is not to add another signal. The goal is to improve the quality of the planning process. 🔐 Non-Promise Statement No script can guarantee direction, continuation, reversal, or outcome. This tool provides structured chart context only. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own analysis, risk controls, position sizing, and trading decisions. This script does not provide financial advice, investment advice, or guaranteed trading outcomes. 📚 Educational Note Use the script to study how trade location changes as price moves closer to risk, target, obstruction, and range edges. The most useful reading comes from comparing the panel state with the visible chart context.

Indicator

Risk Runway Planner [AGPro Series]Risk Runway Planner 🧠 Core Idea Is the current setup offering a clean risk runway, or is risk too wide, too blocked, or still too early? 📌 Overview / What it does Risk Runway Planner is a chart-first risk planning and execution readiness tool designed to evaluate whether a setup has enough structure to deserve active attention. Instead of printing generic buy or sell signals, the script studies stop-distance quality, invalidation clarity, expansion room, volatility state, trend support, and price location. It then converts those factors into a 0-100 quality score and a clear next-action state. The script produces an active risk runway box, invalidation and target-edge guides, compact chart labels, alerts, and a clean AGPro planning panel. It does not predict future price movement, automate decisions, or guarantee that a setup will follow through. 🎯 Purpose & Design Philosophy This script was built for traders who want to evaluate setup quality before execution, not after the chart has already moved. Many tools show signals, volatility compression, or target levels in isolation. Risk Runway Planner is designed to connect the practical planning questions: Where is invalidation? Is stop distance reasonable? Is there enough room before obstruction? Is volatility supportive or unstable? What should the trader pay attention to now? The design mindset is simple: a cleaner decision framework is more useful than another crowded signal layer. ⚡ Why This Script Is Different Most tools focus on entries, squeeze conditions, support/resistance zones, or target projections as separate ideas. This script does NOT try to become a generic compression map, a take-profit ladder, a position-sizing calculator, or a signal generator. Instead, it evaluates the quality of the risk runway between invalidation and the next target edge. The core output is not a trade command. It is a planning state that helps the user decide whether a setup is READY, still on WATCH, BLOCKED by poor room, or exposed to WIDE RISK. ⚙️ Methodology 1. Context Detection The script detects the active planning side using trend structure and price location, or allows the user to force long-context or short-context evaluation. 2. Reference Mapping It maps the current planning range, recent invalidation shelf, nearby obstacle, ATR-normalized stop distance, and projected expansion room. 3. Reaction Evaluation The model scores stop quality, expansion room, trend support, volatility state, and range location. These components are blended into a 0-100 quality score. 4. Visual Output The output is shown through a risk runway box, invalidation guide, target-edge guide, compact labels, deterministic alerts, and a premium planning panel. 🗺️ How to Read the Chart Zones = the active risk runway between invalidation and target edge. Labels = compact state markers showing READY, WATCH, DOWNGRADE, INVALIDATED, or TARGET EDGE context. Colors = bullish and bearish context use AGPro state colors, while neutral and warning conditions use controlled accent tones. Panel = the panel summarizes Risk Compression, Expansion Room, Volatility State, Quality Score, Risk Edge, and Action. 🚦 Signals & States • READY → the current risk runway has enough quality to justify active attention. • WATCH → the setup is improving but does not yet meet the stricter readiness threshold. • WIDE RISK → stop distance or invalidation quality is too weak for clean planning context. • BLOCKED → expansion room is limited or the nearest obstacle is too close. • WAIT → the planner does not detect a strong enough structure yet. • INVALIDATED → a prior active invalidation shelf has been crossed. • TARGET EDGE → a prior target edge has been reached. 🔔 Alerts Logic Alerts trigger when the planner enters READY state, enters WATCH state, downgrades from READY, crosses a prior invalidation shelf, or reaches a prior target edge. These alerts are attention markers. They are not trade instructions, entry signals, or automated strategy commands. 🧩 Confluence Logic The strongest planning state appears when multiple components align: Stop-distance quality + expansion room + trend support + controlled volatility + favorable price location. When these factors align, the script can move from WATCH to READY. If risk widens or room becomes blocked, the state can downgrade. 📊 When to Use • Before evaluating a discretionary setup • During trend pauses where invalidation is becoming clearer • Before breakout or continuation attempts when risk needs structure • Around pullbacks where stop distance and target room need review • When comparing whether one setup has cleaner risk than another ⚠️ When NOT to Use • Extremely low-liquidity symbols • Very noisy micro-timeframes with unstable wicks • News-driven volatility spikes • Markets where recent structure is too distorted to define a useful invalidation shelf • Situations where the user expects a signal-only entry tool 🎛️ Key Inputs • Planning Side → controls Auto, Long Context, or Short Context evaluation. • ATR Length → normalizes stop distance, room, labels, and volatility state. • Planning Range → defines the broader structure used for price location and range context. • Invalidation Lookback → controls how the invalidation shelf is mapped. • Obstacle Lookback → controls how nearby target-edge obstruction is estimated. • READY / WATCH Thresholds → adjust how selective the planner is. • Visual settings → control runway boxes, guide lines, memory boxes, labels, panel location, theme, and font sizes. 🖥️ Interface & Visual Design The interface is built around a clean planning panel and one primary chart object: the risk runway box. The panel uses a single merged AGPro header row and keeps the key planning information readable without turning the chart into a dashboard-heavy layout. Labels are intentionally compact, offset away from candles, and controlled with cooldown and maximum-visible settings. 🧪 Practical Usage Workflow 1. Read the panel action state. 2. Check whether the risk runway box has enough room between invalidation and target edge. 3. Review whether the Risk Edge is reasonable in ATR terms. 4. Confirm whether the chart context supports the selected planning side. 5. Treat alerts as attention markers and review the broader market context before making any decision. 🔍 Interpretation Guidelines A higher score means the planner sees better alignment between risk, room, volatility, trend support, and location. READY does not mean a trade must be taken. It means the setup has enough planning quality to deserve attention. WATCH means the structure may be developing, but at least one component still needs improvement. WIDE RISK and BLOCKED are caution states. They help identify when the chart may be less efficient for planning. 🚫 What This Script Is NOT This script is not a prediction engine. It is not financial advice. It is not an auto-trading system. It does not provide guaranteed signals. It does not replace user judgment, risk management, or broader market analysis. ⚠️ Limitations & Transparency Timeframe differences can change how invalidation shelves and obstacles are detected. Volatility changes can alter ATR-normalized risk and room conditions. Market structure can shift quickly after news, low-liquidity movement, or aggressive momentum expansion. The script is rule-based and should be interpreted as an analytical planning layer, not as certainty. 🧠 Market Context Notes Risk quality is not only about stop distance. It also depends on whether price has enough clean room to move, whether volatility is controlled, and whether structure supports the active side. The planner is most useful when it helps the user avoid low-quality setups before they become emotional decisions. 🧾 Use Case Examples When price is near a constructive invalidation shelf and still has clean room toward the next target edge, the planner may move toward WATCH or READY. When price is too close to the nearest obstacle, the planner may show BLOCKED even if trend direction looks attractive. When stop distance becomes too wide relative to ATR, the planner can show WIDE RISK even if the setup still looks visually interesting. 🧱 System Philosophy Risk Runway Planner follows the AGPro Series decision-engine approach: Context first. Risk before reward. Structure before signal. Attention markers instead of promises. 🔐 Non-Promise Statement No indicator can remove uncertainty. No state, score, label, alert, or visual box should be interpreted as guaranteed market direction. 📉 Risk Disclosure Trading involves risk. All decisions remain the responsibility of the user. This script is for educational and analytical chart review only and does not provide financial advice. 📚 Educational Note The script is designed to help users think more clearly about setup quality, invalidation, volatility, and available room before reacting to price movement.

Indicator

Entry Execution Readiness [AGPro Series]Entry Execution Readiness 🧠 Core Idea Is this setup ready for execution attention now, or should it remain on watch? 📌 Overview / What it does Entry Execution Readiness is a chart-first decision engine built to evaluate whether an active setup has enough structure, risk quality, and target room to deserve execution attention. The script produces a 0-100 Readiness Score, a clear entry state, an entry pocket, an invalidation rail, a target-room band, premium state labels, and a compact AGPro panel. It is designed to organize setup quality, not to predict price or automate execution. It does not publish buy or sell commands. It does not replace a trader's own execution model. Its purpose is to turn observable setup conditions into a cleaner readiness map. 🎯 Purpose & Design Philosophy This script was built for traders who already see a potential setup but need a disciplined way to decide whether the setup is clean enough to keep under execution review. The gap it fills is practical: many tools identify signals, levels, or zones, but they do not answer whether the setup has acceptable risk distance, enough target room, suitable volatility, and directional confirmation at the same time. The design philosophy is simple: execution should be reviewed through readiness, not excitement. ⚡ Why This Script Is Different Most tools focus on printing a signal or highlighting a level. This script does NOT act as a full Position Planner, position sizing model, signal service, or trade automation system. Instead, it evaluates execution readiness through a compact decision layer: trend alignment, candle efficiency, distance to invalidation, target-room quality, and volatility fit are compressed into one transparent score and one clear next-action state. ⚙️ Methodology 1. Context Detection The script detects the active setup side automatically, or lets the user force a long-bias or short-bias readiness view. 2. Reference Mapping It maps an entry pocket around the active trend reference, builds an invalidation rail from recent structure, and projects target room from nearby structure or ATR-adjusted continuation space. 3. Reaction Evaluation It scores trend alignment, candle efficiency, risk distance, reward room, and volatility fit from 0 to 100. 4. Visual Output The chart displays the readiness state through zones, labels, alerts, and a premium AGPro panel with the key decision fields. 🗺️ How to Read the Chart Zones = the active entry pocket and target-room band. Invalidation rail = the structural level that would weaken or reset the current setup context. Labels = the current readiness state, score tier, and risk context. Colors = teal for stronger long-readiness contexts, pink for bearish or invalidation contexts, amber for waiting states, and indigo for monitoring/transition states. Panel = the fastest summary of score, state, risk distance, target room, and next action. 🚦 Signals & States • READY → the setup meets the score threshold and confirmation filter. • MONITOR → the setup is improving but still needs cleaner confirmation or score strength. • WAIT → the setup exists, but risk, target room, or confirmation is not yet strong enough. • BLOCKED → the current context does not offer a clean execution-readiness profile. • INVALIDATED → price closed beyond the active invalidation rail. 🔔 Alerts Logic READY alerts trigger when the state upgrades into READY. Downgrade alerts trigger when the active setup weakens from a stronger state. Invalidation alerts trigger when price closes beyond the current invalidation rail. Confirmation alerts trigger when score and confirmation improve together near the READY threshold. Alerts are attention markers. They are not trade instructions. 🧩 Confluence Logic The setup becomes stronger when directional trend alignment, candle quality, controlled invalidation distance, acceptable volatility, and clean target room improve at the same time. The score is intentionally multi-factor so a single strong candle or a single clean level cannot dominate the full readiness view. 📊 When to Use • Trend continuation setups • Pullback-to-reference execution reviews • Breakout continuation contexts with enough target room • Active trade-planning workflows where the trader already has a directional thesis • Intraday or swing charts where risk and target room need to be evaluated quickly • 4-hour swing/execution review charts where the active pocket, invalidation rail, and target room can be read without excessive label compression ⚠️ When NOT to Use • Very low liquidity markets • Extremely noisy sideways conditions • News-driven volatility spikes • Charts where the user has no independent setup thesis • Markets with poor execution conditions, wide spreads, or unreliable fills 🎛️ Key Inputs • Setup Direction → Auto, Long Bias, or Short Bias readiness mode. • Sensitivity → controls how selective the model is. • Structure Lookback → affects structure, risk rail, target room, and volatility context. • Minimum READY Score → defines the threshold required for READY state. • Confirmation Mode → controls how much candle and trend confirmation is required. • Label Cooldown / Max Visible Labels → controls label density. • Panel Location / Panel Theme / Font Sizes → controls visual presentation. 🖥️ Interface & Visual Design The interface is built around a clean premium overlay. The panel uses the AGPro standard single merged blue header row and summarizes only the most decision-relevant fields. The chart visuals are deliberately limited to the current entry pocket, invalidation rail, target room, and moderate state labels so the script remains readable in publication screenshots. 🧪 Practical Usage Workflow 1. Read the panel state and Readiness Score. 2. Check whether price is interacting cleanly with the entry pocket. 3. Review the invalidation rail and risk distance. 4. Compare the target-room band against the current risk. 5. Treat READY as a review state, not as an automatic execution command. 🔍 Interpretation Guidelines Think of the output as a readiness filter. A high score means the modeled conditions are aligned more cleanly than usual. It does not mean the setup will work. A WAIT or MONITOR state can still be useful because it shows what part of the setup is not yet ready. An INVALIDATED state means the current setup context should be reset or reviewed again from a fresh structure. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a full position-sizing planner • Not a buy/sell command system ⚠️ Limitations & Transparency Timeframe differences can change how structure, volatility, and target room appear. Volatility expansion or contraction can make the readiness state change quickly. Market conditions can shift faster than any rule-based chart tool can summarize. The model is transparent and deterministic, but it cannot know future price behavior. 🧠 Market Context Notes Entry readiness is most useful when it is read together with liquidity, structure, session context, and broader volatility conditions. The script is strongest when the trader already has a setup thesis and needs a cleaner way to review whether execution conditions are improving or weakening. 🧾 Use Case Examples When price pulls back toward the entry pocket, trend alignment remains intact, risk distance stays controlled, and target room remains clean, the setup may upgrade into MONITOR or READY. When price stretches too far from the pocket or target room becomes too thin relative to invalidation distance, the score can weaken even if direction still looks attractive. When price closes beyond the invalidation rail, the active setup context is marked as INVALIDATED. 🧱 System Philosophy AGPro tools are designed to support structured chart reading, decision clarity, and rule-based interpretation. This script follows that philosophy by focusing on execution readiness instead of generic signals. 🔐 Non-Promise Statement No script can provide certainty. No score can guarantee a future outcome. This tool organizes visible chart conditions so the user can make a more structured review. 📉 Risk Disclosure Trading involves risk. Market movement can be unpredictable, and any setup can fail. Users are responsible for their own analysis, execution, risk management, and decisions. This script does not provide financial advice, investment advice, or guaranteed trading outcomes. 📚 Educational Note Use the script as a structured decision-support layer. The strongest benefit comes from reviewing why the state is READY, WAIT, MONITOR, BLOCKED, or INVALIDATED rather than treating any single label as a standalone answer.

Indicator

Weekly Open Reaction Map [AGPro Series]Weekly Open Reaction Map 🔹 OVERVIEW Weekly Open Reaction Map is a focused weekly open overlay built for traders who use the current weekly open as a higher-timeframe anchor. The weekly open is one of the simplest and most widely watched reference levels on a chart. Many traders mark it manually, but a plain horizontal line does not show whether price is accepting above it, losing it, reclaiming it, or repeatedly reacting through the same area. This script turns the weekly open into a structured reaction map. The script plots the current weekly open, builds an adaptive reaction band around it, detects accepted behavior above or below the level, marks selective reclaim and loss events, and summarizes the active state in a compact dashboard. The goal is clarity: How is price reacting around the current weekly open? This is not a broad level engine. It is not a full weekly range dashboard. It is not a prior high or prior low tool. It is not a session-open model. It is a single-anchor weekly open reaction framework designed to keep the chart clean while adding practical context. 🔹 WHAT MAKES IT DIFFERENT Weekly Open Reaction Map is built around one level only: the current weekly open. Instead of plotting a large set of reference prices, the script focuses all of its logic on the active weekly open and asks whether price is above it, below it, reclaiming it, losing it, or still testing the reaction area. Key differentiators: • Single-anchor design centered only on the current weekly open • Adaptive reaction band instead of a fragile one-tick line • Acceptance-side model using sustained closes beyond the band • Reclaim and loss labels designed to stay selective by default • Concept-native rectangular reaction zones around confirmed weekly open behavior • Compact panel showing distance, acceptance side, active-week reaction count, weekly bias, and last event • Cleaner default visual mode tuned for 1H, 4H, and 1D public-chart presentation • Optional initial acceptance events for users who want more context The script is intentionally restrained. It does not try to become a full market structure suite. Its value comes from making one simple, popular, and highly searchable level more readable. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script was designed to stay separate from existing AGPro public concepts. It does not overlap with Daily Open Acceptance Map because this script does not reset around the daily open. The weekly open carries context across several trading days, so the logic is built around a multi-day weekly anchor rather than an intraday daily reference. It does not overlap with Reference Price Operating Map because this script does not compare multiple reference prices. There is no multi-reference framework here. The weekly open is the only operating level. It does not overlap with Session Reaction Map because this script does not evaluate Asia, London, New York, or session-start behavior. It continuously follows the active week and reads how price behaves around the weekly open over time. It does not overlap with PDH PDL PWH PWL Engine because this script does not plot previous day highs, previous day lows, previous week highs, previous week lows, or active range corridors. It avoids becoming a prior-period high/low engine. It does not overlap with generic support and resistance scripts because its boxes are not derived from swing pivots, historical ranges, or broad supply-demand zones. The reaction zones exist only when weekly open behavior is confirmed. The scope is narrow by design: Current weekly open. Acceptance. Reclaim. Loss. Reaction zones. Weekly bias. ⚙️ METHODOLOGY The script reads the current weekly open from the weekly timeframe and projects it onto the active chart. Around that weekly open, it builds a reaction band. This prevents the script from treating the weekly open as an unrealistically perfect single price. The band can be sized by: • ATR for volatility-adjusted behavior • Percent for proportional market structure • Ticks for fixed instrument precision The acceptance model checks whether price can sustain closes beyond the reaction band. A single close is not enough by default. The user can define how many consecutive closes are required before the script recognizes accepted behavior. The engine then tracks which side of the weekly open has been established during the active week. A weekly open reclaim is detected when price had already traded below the weekly open context and then confirms acceptance back above the level after a recent band interaction. A weekly open loss is detected when price had already traded above the weekly open context and then confirms acceptance below the level after a recent band interaction. Optional initial acceptance events can also be enabled. These show which side of the weekly open became dominant first after a new week begins. They are disabled by default so the public chart remains cleaner and more focused on reclaim/loss transitions. Confirmed events can create rectangular reaction zones. These zones preserve the weekly open area where the reaction was confirmed and project it forward for context. They are concept-native zones, not generic support/resistance boxes. 📊 PANEL The panel gives a fast read of the active weekly open condition. Distance Shows how far current price is from the weekly open, including a percent reading. Acceptance Side Shows whether price is accepted above the weekly open, accepted below it, or still testing the weekly open band. Reaction Count Counts confirmed weekly open reactions for the active week. The panel uses active-week logic, while visual label limits keep historical charts clean. Weekly Bias Summarizes the current weekly open state as Bullish Control, Bearish Control, or Neutral Test. Last Event Shows the latest confirmed weekly open event, such as WO Reclaim, WO Loss, WO Accept +, or WO Accept -. The panel includes adjustable location, theme, and font size controls. The first panel row follows the AGPro standard: a single merged blue header row containing only the script name. 🎛️ KEY INPUTS Show Weekly Open Line Controls whether the current weekly open line is displayed. Weekly Open Line Width Controls the visual weight of the weekly open reference line. Reaction Band Width Mode Choose ATR, Percent, or Ticks to define the width of the weekly open reaction area. ATR Width Multiplier Controls volatility-adjusted band width when ATR mode is selected. Percent Width Controls proportional band width when Percent mode is selected. Tick Width Controls fixed band width when Ticks mode is selected. Acceptance Confirmation Bars Defines how many consecutive closes are required before price is treated as accepted above or below the weekly open band. Recent Touch Window Requires confirmed events to occur near a recent weekly open band interaction. Show Active Weekly Open Band Displays the live weekly open reaction corridor. Show Confirmed Reaction Zones Draws extended boxes around confirmed weekly open reclaim, loss, or optional initial acceptance behavior. Reaction Zone Extension Bars Controls how far confirmed weekly open reaction zones project forward. Maximum Reaction Zones Limits the number of historical zones shown on the chart. Show Reclaim / Loss Labels Displays selective weekly open reclaim and loss labels. Show Initial Acceptance Events Allows first-side weekly open acceptance events to create labels and zones. Disabled by default for a cleaner public view. Minimum Bars Between Labels Controls cross-week spacing between event labels, helping avoid historical label clusters. Maximum Event Labels Limits visible historical event labels for a cleaner chart. Label Offset ATR Moves labels away from candles so they stay readable. Label Font Size Controls event label size. Normal is the default. Panel Location Moves the dashboard to the preferred chart location. Panel Theme Selects Dark, Light, or Auto panel styling. Panel Font Size Controls dashboard text size. Normal is the default. 🔍 HOW TO READ IT Start with the weekly open line. If price is above the line and the panel shows Above WO, the market is currently accepting above the weekly open band. If price is below the line and the panel shows Below WO, the market is currently accepting below the weekly open band. If the panel shows Testing WO, price is still close enough to the reaction band that the weekly open has not resolved clearly. WO Reclaim This label means price previously moved below the weekly open context and later confirmed acceptance back above it. WO Loss This label means price previously held above the weekly open context and later confirmed acceptance below it. Reaction Zones These boxes highlight the weekly open area where a confirmed reaction occurred. They can act as visual memory zones for later retests, pauses, or renewed pressure around the same weekly anchor. Weekly Bias The bias reading is not a standalone trade call. It is a context label that tells whether the active week is currently being controlled above the weekly open, below the weekly open, or still near the test area. Reaction Count This helps identify whether the week has been clean and directional or has already produced several confirmed weekly open reactions. 🧩 BEST USE CASES Weekly open context Use the script to understand whether the active week is being accepted above or below its opening level. Reclaim tracking Use WO Reclaim labels to identify when price regains the weekly open after trading below it. Loss tracking Use WO Loss labels to identify when price gives up the weekly open after previously holding above it. Multi-timeframe planning Use the weekly open as a higher-timeframe anchor while viewing 1H, 4H, or 1D charts. Clean chart workflow Use the script when you want one important weekly reference instead of a crowded stack of levels. Reaction-zone review Use projected boxes to remember where meaningful weekly open reactions were confirmed. Public chart publishing Use the default settings for cleaner PulseWire screenshots and a more premium chart layout. 🧠 VISUAL DESIGN PHILOSOPHY The design philosophy is premium restraint. The weekly open should be easy to identify, but it should not dominate the chart. Labels should be useful, but not constant. Zones should preserve meaningful reaction areas, but not turn the screen into a grid of boxes. The default settings are intentionally cleaner: • Initial acceptance events are off by default • Reclaim and loss behavior remains the primary visible story • Label spacing works across weeks, not only inside one week • Historical label and zone limits are conservative • The panel uses a compact AGPro dashboard style • The active weekly open band is visible without overwhelming candles This helps the script remain practical on 1H, 4H, and 1D views while still giving the chart enough structure to feel complete. 🔔 ALERTS The script includes alert conditions for key weekly open events: Weekly Open Reclaim Triggers when price confirms a reclaim of the weekly open after previously trading below the weekly open context. Weekly Open Loss Triggers when price confirms a loss of the weekly open after previously trading above the weekly open context. Weekly Open Accepted Above Triggers when price confirms acceptance above the weekly open band. Weekly Open Accepted Below Triggers when price confirms acceptance below the weekly open band. These alerts are designed for context awareness around the weekly open. They are not intended to replace a complete trading plan or broader market review. 🔹 LIMITATIONS AND TRANSPARENCY Weekly Open Reaction Map is intentionally focused on one reference level. It does not attempt to map every support/resistance area on the chart. The script does not include previous day highs, previous day lows, previous week highs, previous week lows, session opens, daily opens, volume profile levels, swing pivots, or order-flow data. Because the weekly open can behave differently across assets and timeframes, users may need to adjust the reaction band width, confirmation bars, and label spacing for their market. On very low timeframes, labels can appear more frequently if sensitivity is increased. On higher timeframes, fewer but more meaningful events are expected. The weekly bias panel is a context tool. It describes the current relationship between price and the weekly open; it does not predict future price movement. The script is built to stay clean, transparent, and focused. Its strength is not feature volume. Its strength is making one widely used weekly reference level easier to read. ✅ IDEAL USER This script is ideal for traders who: • Use the weekly open as a key higher-timeframe reference • Want a cleaner way to read weekly open acceptance, reclaim, and loss • Prefer focused tools over crowded multi-level dashboards • Trade crypto, forex, indices, or liquid stocks where the weekly open is actively watched • Use 1H, 4H, or 1D charts for market context • Want reaction zones without turning the chart into a generic support/resistance map • Publish or review PulseWire charts and need a clean visual presentation • Prefer structured context over excessive labels and visual noise Weekly Open Reaction Map is built for traders who want the weekly open to become more than a line. It turns that level into a readable acceptance and reaction framework while keeping the chart professional, restrained, and publication-ready.

Indicator

Measured Move Projection Zones [AGPro Series]Measured Move Projection Zones 🔹 OVERVIEW Measured Move Projection Zones is a premium price-action visualization tool built around one clear sequence: impulse, base, projection, and invalidation. The script detects a qualified impulse leg, waits for a compact base range, then projects a measured-move target band from the base boundary. It also displays invalidation context, event labels, and a compact AGPro panel so the structure can be reviewed quickly on the chart. The default profile is tuned for 1-hour charts, where measured-move structures need enough responsiveness to appear consistently while still avoiding low-quality micro-swings. The result is a clean projection map for traders who want structured continuation context without turning the chart into a dense extension grid. This script is not designed to promise outcomes or mark every possible target. It is designed to make the measured-move workflow easier to see, compare, and audit. 🔹 WHAT MAKES IT DIFFERENT Most projection tools start from a manual anchor, a generic extension grid, or a simple breakout distance. Measured Move Projection Zones is more selective. It requires a directional impulse first. It then waits for a compact base. Only after the base qualifies does it create the projected target band and invalidation framework. That sequence matters because it prevents the chart from becoming a collection of random forward boxes. The visual logic is always tied to a specific price-action chain: Impulse leg -> base range -> projection band -> invalidation context. The script also avoids the look of a traditional support/resistance map. The rectangles are not generic zones. They represent measured-move components: impulse body, base range, projected target band, and invalidation reference. For public PulseWire presentation, the script is deliberately visual but controlled: moderated labels, visible structure boxes, no expired-label flood, and a compact panel that summarizes the current state. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script stays in a narrow measured-move projection lane. It does not overlap with ATR compression or volatility-map scripts because the core logic is not volatility contraction, expansion, or envelope behavior. ATR is only used for normalization, tolerance, and spacing. It does not overlap with breakout-quality tools because it does not score a breakout event as the main product. Breakout beyond the base boundary only changes the measured-move state from armed to active. It does not overlap with premium/discount or valuation-zone tools because it does not map equilibrium, discount, OTE, rebalance pockets, or fair value areas. Its target band is derived from an impulse leg and base boundary, not a valuation model. It does not overlap with wedge, reversal, or pattern-scanner tools because it does not require converging rails, neckline behavior, double tops, double bottoms, head-and-shoulders logic, or multi-pattern classification. It does not overlap with liquidity heatmap, bias dashboard, or volume-profile tools because it does not estimate liquidity fields, higher-timeframe directional bias, POC gravity, acceptance ladders, or volume shelves. The differentiator is simple and specific: this is an impulse-base measured-move projection visualizer with target-band and invalidation context. ⚙️ METHODOLOGY The methodology is built in stages: 1. Swing Confirmation The script uses pivot confirmation to identify meaningful swing points. The default pivot setting is tuned for 1-hour chart rhythm. 2. Impulse Qualification After a valid pivot sequence appears, the script measures the leg size in ATR units. The impulse must be large enough and must form within a reasonable bar window. 3. Base Validation Once the impulse is confirmed, the script waits for a compact base range. The base must stay within a defined ATR height and avoid excessive retracement from the impulse end. 4. Projection Construction When the base qualifies, the script projects a measured-move target band from the base boundary. The default multiplier is 1.00, representing a classic equal measured move. 5. Invalidation Context The opposite side of the base receives an ATR-buffered invalidation guide. This does not create a trade command; it simply marks where the measured-move structure is no longer clean. 6. State Tracking The setup moves through clear states: Waiting, Building Base, Armed, Projecting, Target Band, Invalidated, and Expired. 7. Visual Management The script keeps a moderated amount of historical structure visible. Event labels are capped, expired labels are disabled by default, and the projection guide line is optional to keep the chart clean. 📊 PANEL The AGPro panel is designed for quick structure review. Panel rows include: - State - Direction - Impulse Quality - Projection Progress - Target Distance - Target Band - Base Range - Invalidation The first panel row follows the AGPro public-release standard: one merged blue header row containing only the panel title. Panel location is adjustable. Panel theme is adjustable. Panel font size is adjustable. The default size is Normal for a clean public-chart look. 🎛️ KEY INPUTS 1H Pivot Confirmation Length Controls the swing confirmation used to anchor impulse legs. Lower values are more responsive. Higher values are more selective. 1H Minimum Impulse Size Defines the minimum impulse strength in ATR units. The default is tuned to keep 1-hour charts active without accepting very small swings. 1H Base Range Bars Controls how many bars are used to validate the post-impulse base. The default is shorter for hourly chart pacing. 1H Maximum Base Height Limits how tall the base can be in ATR terms. This prevents wide ranges from being treated as clean measured-move bases. 1H Maximum Base Retracement Controls how deeply price can retrace from the impulse end while still qualifying as a measured-move structure. Measured Move Multiplier Controls the projection distance. The default value of 1.00 represents an equal measured move. 1H Target Band Width Controls the ATR-based visual tolerance around the projected target. Invalidation Buffer Places the invalidation guide beyond the opposite side of the base range. 1H Projection Bars Controls how far the projected target band and base extension reach forward. 1H Projection Expiration Controls how long an armed or active projection can remain open before it expires. 1H Event Label Retention Controls whether the chart keeps a moderated history of event labels or only the latest event label. 1H Balanced Event Labels Caps event labels so the chart remains informative but not overloaded. Show Projection Guide Line Optional dotted guide from the base boundary to the target band. Disabled by default on 1-hour charts to reduce diagonal clutter. 🔍 HOW TO READ IT Waiting No valid impulse-base sequence is active. Building Base An impulse has been detected and the script is watching for a compact base. Armed A valid base has formed. The projection framework is ready, and the target band is mapped forward. Projecting Price has moved beyond the base boundary and the measured-move structure is active. Target Band Price has interacted with the projected target band. Invalidated Price has closed beyond the invalidation guide, meaning the measured-move framework is no longer clean. Expired The projection did not complete within the selected expiration window. Event labels provide a fast visual timeline. The boxes show where the measured structure came from, where the base formed, and where the projected band sits. 🧩 BEST USE CASES This script is best used on 1-hour charts where traders want a clean view of impulse-base-continuation behavior. Strong use cases include: - Measuring continuation structures after a directional leg - Comparing active projections against nearby price action - Reviewing whether a base is compact enough to support a projection - Mapping projected target zones without using a full extension grid - Studying failed measured moves through invalidation labels and zones - Creating cleaner screenshots for price-action review The script can also be used on other timeframes, but the default settings were intentionally tuned around 1-hour structure density and visual balance. 🧠 VISUAL DESIGN PHILOSOPHY The visual design is built around premium restraint. The chart should not look empty, but it also should not look like every candle is receiving a signal. Measured Move Projection Zones keeps the main structural elements visible: - Impulse boxes - Base range boxes - Projected target bands - Invalidation zones or guides - Moderated event labels - Compact AGPro panel Expired labels are disabled by default because they can quickly become noisy on hourly charts. Event labels are still preserved in a moderated amount so the chart has enough visual context. The optional projection guide line is disabled by default because long diagonal lines can dominate a 1-hour screenshot. Users can enable it when they want a more explicit projection path. The goal is a chart that looks structured, premium, and publication-ready while still being easy to read. 🔔 ALERTS The script includes alert conditions for the core lifecycle events: - Measured Move Armed - Projection Active - Target Band Interaction - Projection Invalidated - Projection Expired These alerts are designed around structure states, not trade commands. They help users monitor when a measured-move framework forms, activates, interacts with the projected band, invalidates, or expires. 🔹 LIMITATIONS AND TRANSPARENCY Measured Move Projection Zones is a structural visualization tool. It does not predict future price and does not claim that a projected target band will be reached. Pivot-based swing logic confirms structure after the necessary bars have formed. This creates cleaner anchors, but it also means the script is not trying to label every move in real time before confirmation. The target band is a measured projection derived from the impulse and base, not a certainty zone. Invalidation and expiration states are part of the design because failed measured moves are also useful information. Settings matter. More aggressive inputs will create more structures. More conservative inputs will create fewer, cleaner structures. ✅ IDEAL USER This script is ideal for traders who: - Use 1-hour charts for price-action review - Study impulse-base-continuation behavior - Want measured-move target zones without a cluttered extension grid - Prefer visual structure over heavy signal text - Want a clean AGPro-style panel for quick state review - Care about invalidation and failed projection context - Need a public-chart-friendly tool that looks polished, focused, and easy to understand Measured Move Projection Zones is built for users who want a disciplined projection framework on the chart: enough structure to be useful, enough restraint to stay premium.

Indicator

Quasimodo Reversal Zones [AGPro Series]Quasimodo Reversal Zones 🔹 OVERVIEW Quasimodo Reversal Zones is a focused Smart Money Concepts tool built around one specific idea: the Quasimodo reversal pattern. Instead of turning the chart into a crowded market-structure dashboard, this script identifies confirmed QM swing sequences, marks the original shoulder-derived QM level, projects a clean reaction zone, and tracks the invalidation threshold from the head. The goal is simple: help traders see where a valid Quasimodo structure formed, where price may revisit the QM level, whether the reaction zone is active, and when the structure has failed. It is designed as a premium public-free AGPro tool for traders who want a clean, visual, and selective Quasimodo framework without generic signal clutter. 🔹 WHAT MAKES IT DIFFERENT Most reversal tools try to detect too many patterns at the same time. They often combine double tops, double bottoms, head and shoulders, order blocks, BOS, CHOCH, liquidity sweeps, and support/resistance zones into one heavy overlay. Quasimodo Reversal Zones stays intentionally narrow. Its only job is to map Quasimodo reversal structures with quality scoring, reaction-zone tracking, and invalidation logic. This makes the script easier to read, easier to trust visually, and more useful as a dedicated QM layer inside a larger trading workflow. The script also avoids marking every small pivot as a pattern. A valid QM structure must pass multiple filters: - confirmed swing sequence, - meaningful head extension, - displacement beyond the pullback swing, - minimum spacing between pivots, - swing amplitude quality, - time-balance evaluation, - optional relative-volume participation. This gives the tool a more selective and professional feel than simple pivot-label scripts. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script was designed to stay in a very specific lane inside the AGPro Series catalog. It is not a broad reversal-pattern scanner. It is not a BOS or CHOCH dashboard. It is not an order block tool. It is not a generic support/resistance zone engine. It is not a liquidity sweep module. Its focus is the Quasimodo pattern only. The visual logic is built around four QM-specific components: - the shoulder, - the head, - the QM level, - the reaction zone with invalidation. That narrow structure keeps the tool differentiated from broader AGPro pattern, breakout, structure, and zone-based scripts while still giving traders a strong SMC-style visual experience. ⚙️ METHODOLOGY The script uses confirmed swing pivots to build a four-step Quasimodo sequence. For a bullish QM structure, the script looks for: - an initial swing low, - a swing high, - a lower low that forms the head, - a higher high that confirms the sequence break. For a bearish QM structure, the script looks for: - an initial swing high, - a swing low, - a higher high that forms the head, - a lower low that confirms the sequence break. After the sequence is confirmed, the original shoulder becomes the QM level. A compact ATR-based reaction box is projected around that level. The head becomes the invalidation reference, with optional ATR padding. The quality score is built from: - head extension strength, - sequence-break displacement, - spacing between pivots, - average swing size, - internal time balance, - optional relative-volume confirmation. Only structures that meet the selected score threshold are drawn on the chart. 📊 PANEL The AGPro panel summarizes the latest valid QM structure in a compact format. Panel fields: - Pattern Side - Structure Quality - Zone Status - Score The first panel row follows the AGPro standard: one merged blue header row containing only the script name. Panel location, panel theme, and panel font size are adjustable from settings. The default panel size is Normal for a clean publication-ready layout. 🎛️ KEY INPUTS Swing Pivot Length Controls how strict the confirmed swing structure should be. Higher values create fewer but cleaner patterns. ATR Normalization Length Used to normalize zone width, head extension, sequence displacement, label offset, and invalidation padding. Minimum Head Extension Defines how far the head must extend beyond the original shoulder before the sequence can qualify. Minimum Sequence Break Defines how strongly the final swing must break beyond the pullback level. Minimum Pattern Score Filters out weaker QM sequences before they are drawn. Signal Cooldown Bars Controls label density and prevents the chart from becoming overloaded on noisy markets. Reaction Zone Width Controls the ATR-based thickness of the projected QM reaction box. Reaction Zone Length Controls how far the reaction zone projects into the future. Invalidation Buffer Adds optional ATR padding beyond the head-based invalidation level. Maximum Visible QM Zones Limits how many recent QM zones remain visible on the chart. Label Font Size and Panel Font Size Both are adjustable, with Normal as the default setting. 🔍 HOW TO READ IT Start with the panel. Pattern Side shows whether the latest valid structure is bullish or bearish. Structure Quality gives a quick qualitative view of the setup. Zone Status shows whether the reaction zone is waiting, active, confirmed, or invalidated. Score shows the numerical strength of the latest accepted QM pattern. On the chart: - Shoulder marks the original level that later becomes the QM reference. - Head marks the extension that creates the imbalance. - QM Level marks the precise shoulder-derived reaction level. - Reaction Zone shows the area where the QM retest is being tracked. - Invalidation Line shows where the structure is no longer valid. - Status Label shows the live state of the latest zone. The cleanest reads usually come when price returns to the reaction zone after a strong sequence break and then shows a visible response away from the QM level. 🧩 BEST USE CASES This script is best used for: - SMC-style Quasimodo analysis, - swing-based reversal mapping, - reaction-zone planning, - invalidation-based structure review, - higher-timeframe QM context, - clean chart screenshots for public analysis, - traders who want one dedicated QM layer instead of a large all-in-one structure scanner. It can be useful on many markets and timeframes, but the best visual quality usually appears on charts where swings are clear and price action is not excessively compressed. 🧠 VISUAL DESIGN PHILOSOPHY The visual design is built around clarity, not clutter. The script uses the AGPro color palette with a restrained premium look: - blue merged panel header, - teal bullish structures, - pink bearish structures, - gold invalidation or inactive-state emphasis, - compact labels placed away from candles where possible, - projected boxes that stay readable without covering the chart. The chart should not feel empty, but it should also not feel noisy. Labels, zones, and status elements are intentionally controlled with cooldowns, maximum visible zones, adjustable offsets, and configurable font sizes. The goal is to make the QM story easy to understand at first glance. 🔔 ALERTS The script includes alerts for important QM events: - Bullish Quasimodo Sequence - Bearish Quasimodo Sequence - QM Reaction Zone Touched - QM Reaction Confirmed - QM Pattern Invalidated These alerts are designed around structure events rather than generic entry messages. 🔹 LIMITATIONS AND TRANSPARENCY This script uses confirmed pivots, so patterns are confirmed only after enough bars have passed to validate the swing structure. It is intentionally selective. Some early or aggressive QM ideas may not appear if they fail the pivot, spacing, displacement, or score requirements. The script is not designed to predict every reversal. It is designed to identify cleaner Quasimodo structures, display the relevant reaction zone, and provide a clear invalidation reference. It also does not attempt to replace broader market analysis. Trend context, volatility, liquidity conditions, and higher-timeframe structure can still matter. ✅ IDEAL USER This script is ideal for traders who: - understand basic SMC and price-action concepts, - want a clean Quasimodo-specific tool, - prefer visual structure over signal spam, - care about invalidation and reaction-zone logic, - want a focused public-free AGPro tool that does not overlap with broader reversal scanners, - value a premium chart presentation with adjustable labels, zones, and panel controls. Quasimodo Reversal Zones is built for traders who want the QM pattern to be visible, structured, and easy to evaluate without adding unnecessary market-structure clutter.

Indicator

ABCD Projection Zones [AGPro Series]ABCD Projection Zones 🔹 OVERVIEW ABCD Projection Zones is a premium price-action projection tool built for traders who want a clean ABCD pattern map without turning the chart into a full harmonic scanner, Auto Fib suite, retracement dashboard, or broad pattern-recognition system. The script focuses on one specific market-structure idea: a confirmed A-B-C swing sequence can project a forward D completion area when the A-B leg is measured from point C. Instead of plotting a single thin target line, the script converts that measured move into a practical projected completion zone. This makes the result easier to read on real charts where reactions often happen around an area rather than at one exact tick. The tool detects the structure, measures the leg relationship, projects the completion zone, tracks the distance to that zone, and then follows the reaction lifecycle after price reaches it. The goal is a premium, readable ABCD projection workflow that helps traders understand where the current structure is, how mature it is, and how price is behaving around the projected completion area. 🔹 WHAT MAKES IT DIFFERENT Many ABCD, projection, and pattern tools try to do too much at once. They combine multiple Fibonacci ratios, harmonic pattern names, extended target ladders, retracement grids, reversal labels, and broad pattern scanning into one chart overlay. That can look busy, but it often makes the active structure harder to understand. ABCD Projection Zones takes a narrower and cleaner route. It does not attempt to label every harmonic family. It does not expose a full Fibonacci framework. It does not place several competing projection targets on the chart. It does not turn the layout into a generic support and resistance map. The difference is the focused lane: confirmed ABCD swing projection, one projected completion zone, one reaction lifecycle, and a concise panel that explains the active setup. The visual language is also different. The D area is shown as a forward rectangle with centered zone text inside the box. Active and archived zones stay named, labels use consistent sizing, and archived context remains muted so the active projection remains dominant. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script is intentionally separated from other AGPro tools by scope, visual behavior, and analytical purpose. It is not an Auto Fib Structure tool. It does not publish multiple retracement and extension levels, does not expose a full Fib grid, and does not present itself as a broad Fibonacci framework. It is not a harmonic scanner. It does not label Gartley, Bat, Butterfly, Crab, Shark, or other harmonic families. It does not rank multiple harmonic candidates or compare pattern families. It is not a generic support and resistance zone script. The rectangles are not general S/R zones. They are specifically ABCD completion and reaction zones derived from swing-leg symmetry. It is not a trend dashboard, volatility map, liquidity sweep scanner, or broad price-action suite. Its job is only to map a confirmed A-B-C structure into a projected D completion zone and monitor the reaction state around that zone. This makes the public release lane clear: a focused ABCD projection and reaction-zone tool for measured-move structure, not a duplicate of existing AGPro zone, Fib, S/R, harmonic, or dashboard concepts. ⚙️ METHODOLOGY The script starts by detecting confirmed swing highs and lows using pivot-based structure logic. This gives the model cleaner A, B, and C points and helps reduce random candle noise. After the A-B-C sequence is confirmed, the script measures the A-B leg and the B-C pullback. The B-C pullback is evaluated as a ratio of A-B, but this ratio is used as a structure-quality filter, not as a visible Fibonacci grid. The projected D area is calculated by applying the A-B leg from point C. This creates an AB=CD style measured-move projection. The projected D price is then expanded into a rectangle using ATR-based padding so the completion area behaves like a practical reaction zone rather than a thin target. The script then tracks the active projection lifecycle: - Waiting: price has not yet approached the projected zone. - Approaching: price is close enough to the zone to matter. - Completed: price has reached the projected D area. - Reacting: price is moving away from the zone after contact. - Overrun: price has moved beyond the zone buffer. - Expired: the projection window passed without completion. The scoring model combines impulse quality, pullback quality, and structural alignment into a 0-100 score. This score is not a standalone signal; it is a compact way to summarize the quality of the active ABCD projection structure. 📊 PANEL The AGPro panel is designed for quick chart reading without forcing the trader to inspect every object manually. Panel fields: - Leg Ratio: shows the B-C pullback size relative to A-B. - Completion Distance: shows the current distance to the projected D zone in price and ATR terms. - Reaction State: shows the active lifecycle state of the projection. - Symmetry Quality: classifies the active setup as Weak, Developing, Clean, or Strong with directional context. - Projection Progress: shows how far price has traveled from point C toward the projected D area. - Score: summarizes the active setup quality from 0 to 100. Panel standards: - The first row is one merged blue AGPro header row. - The header contains only the panel title. - Panel location is adjustable. - Panel theme is adjustable. - Panel font size is adjustable. 🎛️ KEY INPUTS Detection: - Swing Left Strength - Swing Right Strength - ATR Length - Minimum AB Leg Size ATR - Minimum BC Pullback Ratio - Maximum BC Pullback Ratio Projection Zone: - Projection Length Bars - Zone Padding ATR - Approach Distance ATR - Overrun Buffer ATR - Zone Fill Transparency - Archived Zones - Archived Zone Transparency - Show Text Inside Zones Visuals: - Show ABCD Path - Show ABCD Labels - Show Completion Marker - Label Font Size - Label Offset ATR - Completion Marker Offset Bars Panel: - Show Panel - Panel Location - Panel Theme - Panel Font Size 🔍 HOW TO READ IT Start with the A-B-C labels. Point A and point B define the impulse leg. Point C defines the pullback from which the measured-move projection begins. The dotted projected path shows the C-D measured move. The forward rectangle marks the projected completion zone. If price is still far from that rectangle, the panel will usually show Waiting and a lower Projection Progress value. As price moves toward the rectangle, Projection Progress increases and the Completion Distance decreases. When price reaches the zone, the script marks D Hit and changes the lifecycle state. After that, the most important reading is whether the zone becomes a Reaction Zone or an Overrun Zone. Archived zones should be read as context, not as the main decision layer. They show previous projected reaction areas in a muted style so the chart does not feel empty, but the active zone remains the priority. 🧩 BEST USE CASES This script is best suited for traders who study market structure, measured moves, swing projection, ABCD patterns, and reaction-zone behavior. Strong use cases include: - Mapping a clean ABCD completion area after a confirmed A-B-C structure. - Tracking how close price is to a projected D area. - Separating developing projections from completed projections. - Watching for reaction behavior after price reaches a projected completion zone. - Reviewing recent projected zones without overcrowding the chart. - Keeping a clean price-action workflow without a full harmonic or Fib suite. The script can be useful across different markets and timeframes, but it is most readable when swing structure is clear enough for pivot-based detection to identify meaningful A-B-C sequences. 🧠 VISUAL DESIGN PHILOSOPHY The visual design is built around premium restraint. The chart should not be empty, but it should also not be overloaded. The active ABCD projection needs to stand out clearly, while archived zones should provide background context without taking attention away from the current structure. Visual standards used in this script: - Active completion and reaction zones are drawn as forward rectangles. - Zone text is written inside the rectangle. - Zone text is horizontally and vertically centered. - Zone text uses transparent label-center styling instead of extra external tags. - Active and archived zone text uses the same label font-size control. - Swing labels are offset with ATR so they do not sit inside candle bodies. - The completion marker is compact and shifted away from nearby swing labels. - The projected C-D path is visible but not visually dominant. - Archived zones are muted to keep the active projection clean. The result is a chart that communicates structure, projection, and reaction state without looking like a crowded signal board. 🔔 ALERTS Included alert conditions: - New ABCD Projection Zone: triggers when a new qualified ABCD projection is detected. - ABCD Completion Reached: triggers when price reaches the active projected completion zone. - ABCD Reaction Confirmed: triggers when price reacts away from the active completion zone. - ABCD Zone Overrun: triggers when price moves beyond the configured zone buffer. 🔹 LIMITATIONS AND TRANSPARENCY The script waits for confirmed pivot structure, so A, B, and C labels appear after swing confirmation rather than at the exact live turning point. The projected D area is based on AB=CD symmetry and ATR-based zone padding. It is designed to map structure and reaction context, not to predict every reversal. The script intentionally avoids a full harmonic library and full Fibonacci framework. This is a design choice, not a missing feature. The goal is to keep the public tool focused on ABCD projection zones. During choppy or low-structure conditions, fewer clean setups may appear. Increasing or decreasing swing strength and leg-size filters can make the tool more selective or more responsive depending on the market and timeframe. ✅ IDEAL USER This script is designed for traders who prefer clean structure tools over crowded all-in-one indicators. The ideal user: - Studies price action and swing structure. - Wants a focused ABCD projection tool. - Prefers zones over single-line targets. - Wants reaction-state context after completion. - Values clean chart presentation. - Wants adjustable labels, panel location, and visual density. - Does not want a full harmonic scanner or public Auto Fib suite. ABCD Projection Zones is built for traders who want one clean projected completion lane: A-B-C structure, measured D zone, reaction state, and a premium AGPro visual presentation.

Indicator

Heikin Ashi Trend Zones [AGPro Series]Heikin Ashi Trend Zones Heikin Ashi Trend Zones is a clean overlay built for traders who like the smoothing behavior of Heikin Ashi but still want to keep the original market candles visible. Instead of repainting the chart with synthetic candles, the script reads the internal Heikin Ashi state in the background and converts it into a focused trend-state layer. The engine follows four core ideas: 1. Internal HA Side The script calculates the active Heikin Ashi side from synthetic HA open and close values, then filters weak neutral bodies so the state does not flip on every small candle. 2. HA Streak Quality The panel tracks how long the current HA side has been active. This helps separate early state changes from mature continuation phases. 3. Optional Transition Zones When the HA side changes with enough body strength, wick cleanliness, close location, ATR pressure, and prior-state maturity, the script can project a compact rectangular transition zone. This layer is disabled by default so the public chart view stays clean, but it remains available for traders who want to inspect HA changeover corridors. 4. Continuation Quality Once a HA streak matures, the script scores continuation quality using body strength, wick cleanliness, close location, smoothed HA slope, streak depth, and ATR context. Labels appear only when the continuation score is strong enough and the cooldown rules allow a clean chart presentation. What makes this script different - It does not replace real candles with Heikin Ashi candles. - It does not behave like a generic trend-following dashboard. - It focuses on HA state transitions, HA streak maturity, and continuation quality. - Optional transition boxes are concept-native HA corridors, not broad horizontal support/resistance zones. - Label density is capped with cooldown and maximum visible label controls. - The panel exposes HA side, streak, transition quality, continuation quality, and ATR context in a compact AGPro layout. Visual design The overlay stays restrained: - A slim trend-state ribbon follows the smoothed HA path. - Optional transition zones can extend forward as compact rectangles when enabled. - Continuation labels are offset from candles with ATR spacing. - Panel location, panel theme, panel font size, and label font size are adjustable. Suggested usage Use the script to study whether Heikin Ashi structure is shifting, stabilizing, or continuing while the original candles remain visible. The strongest reads usually come from alignment between a clean HA side, a growing streak, strong continuation quality, and an ATR context that supports the current state. Default settings are tuned for a balanced public chart view with a clean ribbon and selective continuation labels. Faster traders can reduce smoothing and cooldown values. Swing traders can enable transition zones, increase transition projection, and require higher continuation quality for fewer labels.

Indicator

Flag Continuation Zones [AGPro Series]🔷 Flag Continuation Zones Flag Continuation Zones is a premium bull flag and bear flag continuation engine designed to identify clean continuation structures without turning the chart into a generic breakout scanner. The script focuses on a classic, highly recognizable price-action sequence: impulse pole → controlled flag compression → qualified breakout → forward continuation zone Instead of marking every small consolidation as a flag, the engine validates the structure through pole strength, travel efficiency, flag depth, channel compression, trend alignment, breakout distance, and optional volume participation. 🔷 What Makes This Different Most flag indicators are visually simple but structurally loose. They often label shallow pauses, random pullbacks, or broad ranges as flags. Flag Continuation Zones takes a stricter route. It first requires a validated impulse pole. The move must be large enough relative to ATR and efficient enough to show directional commitment. After that, the script waits for a controlled counter-trend flag window. The flag must remain compact, avoid excessive retracement, and preserve continuation structure before any breakout is accepted. This creates a chart experience that is more selective, cleaner, and easier to trust visually. 🔷 How The Engine Works The script evaluates four core stages: 1. Pole Validation The prior impulse is measured by ATR multiple and path efficiency. This helps separate real directional movement from noisy grinding price action. 2. Flag Compression After the pole, the script studies the consolidation window. A valid flag must remain inside an acceptable depth and range relative to the pole. 3. Breakout Confirmation A continuation event is accepted only when price clears the flag boundary with an ATR buffer and, when available, enough volume participation. 4. Continuation Mapping Accepted structures create a forward rectangular zone, an impulse pole line, a breakout label, and an optional measured-move projection line. 🔷 Visual Design The visual language is intentionally restrained: - clean bull and bear flag labels - rectangular continuation zones - impulse pole reference lines - optional measured-move target line - trend EMA context - compact AG Pro status panel - adjustable panel location - dark and light panel themes - adjustable label and panel font sizes The goal is to make the pattern visible and premium without crowding the chart. 🔷 How This Is Different From Other AGPro Tools This script is not a generic Trend Continuation Quality tool. It is not an abstract continuation scorecard. It is specifically built around the flag pattern family: - impulse pole quality - flag channel compression - breakout through the flag boundary - measured-move continuation context It also avoids overlapping with triangle, consolidation breakout, Donchian breakout, inside-bar breakout, and trendline tools by staying focused on the pole-and-flag structure itself. 🔷 Best Fit This script is useful for traders who want to scan for cleaner bull flag and bear flag continuation patterns across crypto, forex, stocks, indices, and futures. It is especially suitable for: - continuation traders - breakout traders who want stricter structure - price-action traders who follow classic chart patterns - users who prefer rectangular zones and measured-move context - traders who want fewer but higher-quality labels 🔷 Key Inputs Important controls include: - Pole Lookback - Flag Window - Minimum Flag Bars - Minimum Pole ATR Multiple - Minimum Pole Efficiency - Maximum Flag Depth - Maximum Flag Range - Breakout Buffer - Volume Confirmation - Signal Cooldown - Zone Forward Bars - Label Font Size - Panel Location - Panel Theme - Panel Font Size 🔷 In One Sentence Flag Continuation Zones turns the classic bull flag and bear flag pattern into a cleaner, scored, zone-based continuation map built for premium public chart presentation.

Indicator

Triangle Breakout Quality [AGPro Series]Triangle Breakout Quality 🔺 OVERVIEW Triangle Breakout Quality is built for one of the most searched and visually recognizable chart structures in technical analysis: the triangle breakout. The script automatically detects triangle candidates from confirmed pivot highs and pivot lows, projects the upper and lower converging boundaries, measures how much the structure has compressed, locates the projected apex, and grades the quality of the eventual breakout. After the release, it monitors the first return toward the broken triangle boundary so the user can see whether price accepted the breakout or quickly lost structural quality. The goal is not to mark every small consolidation or every trendline touch. The goal is to isolate the full triangle sequence: Formation -> compression -> apex pressure -> boundary release -> first retest state. That full lifecycle is what gives the tool its own identity. A triangle is not just a range, not just a single diagonal line, and not just a breakout candle. It is a narrowing structure where both sides of price are being compressed into a decision point. This script is designed around that idea from the ground up. 🔹 WHAT MAKES IT DIFFERENT Most triangle tools stop at drawing two lines. Most breakout tools stop at the first candle outside a boundary. Triangle Breakout Quality does more by turning the structure into a scored, state-aware workflow. Core differentiators: • Dual-boundary validation The script requires both an upper pivot boundary and a lower pivot boundary. The two lines must converge. This prevents the logic from acting like a generic trendline-break detector. • Compression measurement The engine compares the opening width of the triangle with the current width. A pattern must show meaningful narrowing before it can qualify. • Apex pressure logic The script projects where the upper and lower boundaries intersect and evaluates whether the current structure is close enough to that decision zone to matter. • Breakout quality score Every displayed breakout receives a 0-100 score based on compression, apex pressure, breakout distance, candle body participation, close quality, and optional volume expansion. • Retest state After a breakout, the script watches the first return toward the broken triangle boundary. A held retest and a failed retest are visually different states, not the same event. • Premium visual restraint The chart shows active triangle lines, controlled breakout labels, optional retest labels, subtle candle tint, and a compact AGPro panel. Label density is capped so the layout stays clean for live use and publication screenshots. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script is intentionally separated from the existing AGPro breakout and structure family. It is not Break-Retest Quality, because it does not begin with a horizontal pivot break and then grade the first retest of that static level. Triangle Breakout Quality first requires a valid converging triangle structure. It is not Failed Break Quality, because it is not centered on false breaks and reclaim behavior. It tracks the primary breakout from a valid triangle and then monitors the first boundary retest. It is not Consolidation Breakout Quality, because the reference structure is not a horizontal range. A triangle must have two projected pivot boundaries that move toward each other. It is not Donchian Breakout Quality, because it is not based on period highs and lows or channel escape logic. It is not ATR Envelope Breakout Quality, because it does not use a volatility envelope as the breakout shell. It is not Auto Trendline Break Quality, because it does not score isolated trendline breaks. The event only matters when the upper and lower lines together form a valid triangle compression structure. That distinction matters visually and analytically. On the chart, this script tells a triangle story: converging boundaries, apex pressure, breakout quality, and retest state. It belongs in the chart-pattern lane, not the generic breakout lane. ⚙️ METHODOLOGY 1. Pivot anchors The script uses confirmed pivot highs and pivot lows to define the latest upper and lower triangle boundaries. This keeps the structure rules transparent and reproducible. 2. Convergence filter The upper boundary and lower boundary must move toward each other. The current width of the pattern must be smaller than the starting width, and the compression percentage must meet the selected threshold. 3. Width and maturity filters The pattern must be old enough to represent a real structure, but not so old that it becomes stale. The starting width and current width are also normalized by ATR so the same logic can adapt across symbols and timeframes. 4. Apex projection The script calculates where the two projected boundaries intersect. This creates the apex pressure layer, which helps separate mature triangle compression from loose diagonal movement. 5. Breakout confirmation A bullish breakout requires price to close beyond the projected upper boundary by an ATR-normalized buffer. A bearish breakout requires price to close beyond the projected lower boundary by the same type of buffer. 6. Quality score The breakout score combines: • Compression quality • Apex pressure • Breakout distance beyond the boundary • Candle body participation • Close position inside the breakout candle • Optional volume participation The result is displayed as a compact grade and score so the chart remains readable. 7. Retest state After a breakout, the script projects the broken triangle boundary forward internally and evaluates an ATR-scaled retest tolerance around it. If price revisits that boundary area and holds the correct side, the retest is marked as held. If price loses the boundary, the retest state is marked as failed. 📊 PANEL The AGPro panel summarizes the current structure and latest event: • Pattern Age • Compression • Apex Pressure • Breakout Side • Retest Quality • Current State Panel location, theme, and font size are adjustable. The first row follows the AGPro publication standard: one merged blue header row containing only the panel title. 🎛️ KEY INPUTS Triangle Structure • Pivot Length • Minimum Pattern Age • Maximum Pattern Age • Minimum Compression % • Minimum Starting Width ATR • Maximum Current Width ATR • Maximum Forward Apex Bars Breakout Quality • ATR Length • Volume Average Length • Use Volume Participation • Volume Full-Score Ratio • Minimum Break Distance ATR • High Quality Threshold • Minimum Label Score • Visual Cooldown Bars Retest State • Retest Minimum Bars • Retest Window Bars • Retest Tolerance ATR Visual Controls • Show Triangle Lines • Show Breakout Labels • Show Retest Labels • Tint Breakout Candles • Label Offset ATR • Label Font Size • Maximum Visible Events Panel • Show Panel • Panel Position • Panel Theme • Panel Font Size 🔍 HOW TO READ IT When a valid triangle is forming, the chart displays the converging upper and lower boundaries. The panel reports apex pressure and compression so the projected decision area is visible without adding extra rectangles to the chart. Compression shows how much the pattern has tightened relative to its opening width. When price closes beyond a valid boundary, the script prints a compact breakout label with a quality grade and score. A higher score means the breakout candle carried stronger structural qualities according to the script's rules. After the breakout, retest labels and the panel show whether the first return toward the broken triangle boundary held or failed. A held retest suggests cleaner acceptance of the breakout boundary. A failed retest suggests the release lost quality. Use the tool as a structured chart-reading layer. It is designed to help users compare triangle breakouts by quality, not to replace broader context such as trend, liquidity, session behavior, or personal execution rules. 🧩 BEST USE CASES • Symmetrical triangle compression • Ascending triangle pressure • Descending triangle pressure • Breakout candle quality review • First retest monitoring after triangle release • Screenshot-friendly pattern study • Multi-symbol scanning for cleaner chart-pattern candidates 🔹 LIMITATIONS AND TRANSPARENCY Triangle detection is based on confirmed pivots, so the final anchor points appear only after the selected pivot length has elapsed. This is standard pivot behavior and keeps the structure rules visible. The live triangle can change while new pivots form. Breakout and retest labels are event-based and are designed to remain stable after confirmation. Volume participation is optional because volume quality varies across markets and feeds. On instruments where volume is less informative, the volume component can be disabled. The score is a structured description of the triangle release according to the script's internal model. It should be read as context, not as an execution command.

Indicator

Sequential Exhaustion Tracker [AGPro Series]Sequential Exhaustion Tracker 🔷 Overview Sequential Exhaustion Tracker is a price-action based trend maturity tool built for traders who want to read how far a directional candle sequence has developed, when that sequence is becoming late-stage, and whether the market is more likely to recycle the move or fail back through its terminal zone. The script is not an oscillator, not a crossover tool, and not a protected-brand sequential clone. It does not depend on classic overbought or oversold thresholds. Instead, it tracks qualified directional progress bar by bar, measures the quality of the active count, opens a visual exhaustion window when the run becomes mature, and then follows the next phase as either recycle, testing, or failure. That makes the script useful for a very specific question: Is the current directional run still building cleanly, or has it entered the kind of late-sequence area where follow-through, failure, and reset behavior need closer attention? 🔷 What The Script Measures The engine combines four practical components: 1. Directional candle count The script counts qualified progress candles in the active direction. A candle must show meaningful close-to-close progress, sufficient body commitment, and optional trend-filter alignment before it can advance the count. 2. Exhaustion threshold The count becomes mature only after it reaches the selected threshold. This avoids treating every small move as exhaustion and keeps the tool focused on developed directional sequences. 3. Exhaustion quality The quality model blends count maturity, ATR-normalized stretch from the baseline, opposing wick absorption, and body-efficiency fade. A high reading means the sequence is not only long enough, but also showing late-run characteristics. 4. Recycle/failure lifecycle Once a qualified exhaustion window appears, the script continues tracking price behavior. Strong continuation through the terminal zone can classify the sequence as recycled. A break back through the zone can classify it as failed. This turns the indicator into a lifecycle tracker instead of a one-bar label generator. 🔷 Visual Design The chart output is designed to stay premium and readable: - Compact count labels use milestone-based defaults so the chart shows sequence progress without turning into a label wall. - ATR-based label offsets keep labels away from candle bodies. - Exhaustion zones are drawn as rectangular terminal windows, not generic support/resistance blocks. - Recycle and failure markers are intentionally short and selective. - Older labels and zones are automatically removed to protect chart performance. - The summary panel uses the AGPro standard merged blue title row and a clean four-line state readout. 🔷 Panel Readout The panel summarizes the active condition in a compact format: Direction Shows whether the current qualified run is bullish, bearish, or neutral. Count Shows the active sequential count against the selected exhaustion threshold. Exhaustion Quality Shows the maturity score and the current quality band. Recycle Status Shows whether the sequence is building, mature, testing an exhaustion window, recycling, recycled, failed, or waiting. 🔷 How This Differs From Other AGPro Scripts This script is intentionally separated from AGPro oscillator exhaustion tools. Stochastic Exhaustion Map focuses on stochastic behavior, momentum fatigue, and reset context inside an oscillator framework. Williams %R Exhaustion Map focuses on Williams %R extension behavior and release-corridor logic. Sequential Exhaustion Tracker focuses on the visible candle sequence itself: directional progress, count maturity, terminal exhaustion zone, and post-exhaustion lifecycle behavior. It is also different from support/resistance reaction tools because the rectangles are not structural S/R zones. They are temporary terminal sequence windows created only when a mature count and exhaustion quality condition are present. 🔷 How This Differs From Common Sequential Count Scripts Many sequential scripts focus mainly on printing a fixed count and stopping there. Sequential Exhaustion Tracker takes a different path. It does not simply count bars for visual decoration. It asks whether the count is supported by meaningful directional progress, whether the run has become stretched relative to its own volatility, whether the candle structure is showing absorption, and what happens after the mature sequence appears. The key difference is the lifecycle layer: - Building sequence - Mature count - Exhaustion window - Testing window - Recycle build - Recycled continuation - Failed exhaustion window This gives the script a cleaner analytical role than a basic numbered label tool. 🔷 Suggested Use The script is best used as a chart-context layer for: - identifying late-stage directional runs - separating fresh continuation from mature extension - watching terminal sequence zones - studying continuation recycle behavior - spotting failed late-run pressure - keeping sequential count context visible without overcrowding the chart It is designed to complement market structure, trend context, volatility conditions, and the trader's broader workflow. 🔷 Default Settings The default settings are built for a balanced public-chart presentation: - Count threshold: 8 - Quality threshold: 62 - Trend alignment: enabled - Count label mode: Mature Milestones - Count label start: 6 - Minimum label spacing: 8 bars - Exhaustion zones: enabled - Panel: enabled - Label and panel font sizes: Normal These defaults aim to keep the chart informative without turning it into a noisy label wall. 🔷 Why It Was Built Directional markets often move in phases. Early movement can be clean and efficient. Middle movement can be supported and persistent. Late movement can still continue, but the character of the candles often starts to change. Sequential Exhaustion Tracker was built to make that progression easier to read directly on the chart. The goal is not to call every top or bottom. The goal is to show where the current sequence sits in its own lifecycle and whether the post-exhaustion behavior is confirming continuation, stalling, or failing. That narrow focus is what makes the tool distinct: it is not a general momentum dashboard, not an oscillator map, not a support/resistance engine, and not a signal checklist. It is a dedicated sequential maturity and lifecycle tracker.

Indicator

Breakout Volume Quality [AGPro Series]Breakout Volume Quality 🔷 OVERVIEW Breakout Volume Quality is a chart-overlay indicator built to answer one specific question: When price breaks a defended level, did that break carry real participation quality, or was it only a low-conviction move beyond the line? Many breakout tools detect the level break itself. This script goes one layer deeper. It evaluates the breakout candle through relative volume, body efficiency, close location, distance beyond the broken level, expansion versus ATR, and the quality of the underlying support-resistance range. The output is a clean 0-100 breakout volume quality score, a visual confirmation band, a compact event label, and a retest state panel. The goal is not to mark every possible breakout. The goal is to separate a cleaner participation-backed break from a weak level poke that deserves less visual attention. 🔹 CORE IDEA A breakout is more useful when price does more than cross a line. Breakout Volume Quality looks for a sequence: 1. A support or resistance reference is built from repeated pivot interaction. 2. Price closes beyond that defended level by an ATR-adjusted buffer. 3. The breakout candle is graded for relative volume participation. 4. Candle structure is checked for efficient body control and directional close quality. 5. The move is measured against ATR to understand displacement and expansion. 6. Confirmed events project a forward confirmation band. 7. The script then tracks whether the broken level produces a clean retest hold, expires, or fades back inside. This creates a more complete event map than a simple arrow above or below a candle. 💠 UNIQUE EDGE The edge of this script is the "volume verdict" layer. It does not simply ask whether price broke resistance or support. It asks whether the break showed enough participation quality to deserve confirmation. That distinction matters because visually similar breakouts can behave very differently: - A break with elevated relative volume, strong body efficiency, and a close near the directional extreme usually communicates cleaner participation. - A break with low relative volume, wick-heavy structure, and a weak close beyond the level may be more fragile. - A move that breaks, confirms, and later holds the band is visually different from a move that immediately fades back inside. Breakout Volume Quality turns those differences into a readable score and a structured chart layer. 🔶 WHAT MAKES IT DIFFERENT FROM OTHER AGPRO BREAKOUT TOOLS This script was intentionally designed to avoid overlapping with the existing AGPro breakout family. It is not a Donchian breakout tool. It does not revolve around a rolling channel high or low as the main concept. The level reference comes from defended pivot interaction, and the main evaluation is the volume quality of the break. It is not an Inside Bar breakout tool. It does not require a parent candle compression pattern. The script can evaluate broader defended levels rather than only inside-bar structures. It is not an Opening Range breakout tool. There is no session opening window, no locked opening range, and no session-specific model. It is not an ATR Envelope breakout tool. It does not treat a dynamic volatility envelope as the breakout boundary. ATR is used for normalization, buffers, bands, and score scaling. It is not a Break-Retest quality tool. The retest state is included for workflow context, but the core score is assigned to the breakout candle and its participation quality. The first retest is not the central scoring event. It is not a Failed Break or trap-reclaim tool. Weak breaks are faded as failed confirmations, but the script does not rebuild the event into a reversal or reclaim model. It is not a general RVOL pressure map. Relative volume is used specifically to validate level breaks, not to classify all candles into broad pressure states. This gives Breakout Volume Quality its own clear lane: breakout participation quality around defended levels. 📌 VISUAL COMPONENTS Breakout Line The broken level is extended forward so the user can see the exact structural reference being tested. Decision Rails Eligible defended support and resistance references are displayed as subtle forward rails. These rails keep the chart active while price is building around a level, without turning the script into a generic support-resistance map. Volume Build-Up Windows Compact boxes labeled BULL SETUP or BEAR SETUP can frame areas where price is building volume pressure near an eligible breakout level before confirmation. These windows are concept-native: they show pre-breakout participation pressure, not generic support-resistance zones. Optional Advanced Layers RVOL approach marks, quality candle glow, and pressure trail points are available for users who want more activity on the chart, but they are disabled by default so the main public view remains easy to read. Confirmation Band A rectangular band is projected around the broken level. Confirmed events use stronger visual emphasis, while weak confirmations are faded so the chart keeps important context without becoming noisy. Failed-Confirmation Fade When price breaks a level but fails the volume, score, candle structure, or close-quality model, the event can still be shown as a softer failed confirmation band. Cleaner weak confirmations can also print WEAK UP or WEAK DOWN labels through a minimum-score filter, so the chart gains more context without labeling every low-quality break. Retest Hold Label After a confirmed breakout, the script watches the band for a clean hold. A retest hold is labeled only once so the chart remains controlled. Summary Panel The panel displays the current breakout side, volume confirmation, expansion, retest state, and score. It is designed for quick chart reading without covering the price action. ⚙️ SCORING MODEL The score is built from six components: Relative Volume Measures whether current participation is meaningfully above its volume baseline. Body Efficiency Measures how much of the candle range is represented by the real body. Directional Close Location Checks whether the candle closes toward the breakout side of its own range. Break Distance Measures how far the close finishes beyond the broken level in ATR terms. Expansion Measures the breakout candle range relative to ATR. Range Quality Rewards levels that come from a more defined structure rather than a loose oversized range. Together, these components produce a transparent 0-100 score and a grade-style readout. 🧭 HOW TO USE Use the script to study whether a breakout has participation quality. A stronger event usually has: - A clean close beyond the level. - Relative volume above the confirmation threshold. - A body-dominant candle. - A close near the breakout-side extreme. - Meaningful ATR-normalized displacement. - A confirmation band that later holds during a retest. A weaker event may show: - Low relative volume. - A wick-heavy breakout candle. - A close barely beyond the level. - Fast return back inside the broken structure. - A faded failed-confirmation label instead of a confirmed event. The script is best used as a structured chart-reading layer. It helps organize breakout quality, but it is not a complete trading system by itself. 🔷 KEY INPUTS Pivot Strength Controls how support and resistance references are confirmed. Minimum Level Touches Requires repeated interaction before a level becomes eligible. Level Match Tolerance ATR Groups nearby pivots into one defended level. Close Beyond Level ATR Controls how decisive the break must be beyond the level. RVOL Confirmation Threshold Defines the participation level required for volume confirmation. Minimum Body Efficiency Filters weak, wick-heavy breakout bars. Directional Close Location Requires the candle to close toward the breakout side. Minimum Score To Confirm Controls how selective confirmed breakout labels should be. Confirmation Band ATR Sets the height of the projected band around the broken level. Retest Watch Window Defines how long the script watches for a clean retest hold. Panel Location / Theme / Font Size Allows the panel to be adapted to different chart layouts. Label Font Size / Label Offset Keeps labels readable and away from candle bodies. 🔶 BEST USE CASE Breakout Volume Quality works best when the chart has visible defended levels and the user wants a cleaner way to judge whether the break had enough participation behind it. It is especially useful for: - Breakouts through repeated swing highs or swing lows. - Range exits where volume quality matters. - Comparing strong break candles against weak level pokes. - Reviewing whether a breakout level later behaves as a confirmation band. - Keeping weak break attempts visible without giving them the same visual weight as confirmed events. The script is intentionally restrained: no oversized dashboard, no heavy channel system, no session dependency, and no unnecessary signal spam. The chart stays focused on the level, the break, the volume verdict, and the retest state. 🔹 ALERTS The script includes alert conditions for: - Bullish breakout volume confirmation. - Bearish breakout volume confirmation. - Breakout failed volume confirmation. - Breakout retest hold. - Breakout failed back inside. These alerts are event prompts for chart review and workflow organization. 💎 DESIGN PHILOSOPHY Breakout Volume Quality is built to feel clean, premium, and practical on a public PulseWire chart. The visual hierarchy is deliberate: - Confirmed breaks are visible but not loud. - Cleaner weak confirmations are faded and labeled through a score filter, while low-quality weak breaks stay visually softer. - Decision rails keep active levels visible between major events. - Labeled setup windows explain where pre-breakout volume pressure is forming. - Optional activity layers are available, but the default chart does not rely on unlabeled dots. - Bands are long enough to make the level meaningful. - Retest labels appear only when the state actually changes. - The panel stays compact and focused on the fields that matter. The result is a breakout tool that is easy to understand at first glance, but still has enough structure underneath to support serious review.

Indicator

Volume Absorption Zones [AGPro Series]Volume Absorption Zones 🔷 Overview Volume Absorption Zones is a chart-overlay volume analysis tool built around one specific market condition: high effort with limited price result. Instead of marking every high-volume candle as important, the script looks for candles where participation expands while the candle range stays compressed, the close location shows directional control, and the resulting price area can be tracked as a forward absorption zone. When a valid event appears, the script draws a rectangular bullish or bearish absorption box, projects it forward, adds an invalidation level, and continues monitoring whether the zone is defended, failed, or left as active context. The goal is to make absorption visible as a lifecycle on the chart rather than a one-bar marker. 🔹 Core Idea Absorption is not the same thing as a volume spike. A volume spike can appear during expansion, exhaustion, liquidation, news reactions, or ordinary session activity. This script focuses on a narrower structure: - Volume expands relative to its recent baseline. - Candle spread remains compressed relative to its recent range baseline. - The close location shows directional control. - The wick/body structure leaves a usable absorption range. - The zone remains visible after the event so later defense or failure can be evaluated. Bullish absorption is modeled as high participation absorbed near the lower side of the candle while the close finishes with upper-side control. Bearish absorption is modeled as high participation absorbed near the upper side of the candle while the close finishes with lower-side control. This makes the script an effort-versus-result zone model, not a generic volume highlight. 💎 What Makes This Script Different Most volume absorption scripts and high-volume tools stop at one of three outputs: - A candle color. - A triangle or label. - A simple high-volume marker. Volume Absorption Zones goes further by converting the detected event into a managed chart zone. The script keeps asking questions after the first signal: - Where is the absorption range? - Is the zone still active? - Has price defended the zone? - Has price closed beyond the invalidation level? - Is follow-through improving or fading? - How old is the zone? - Is the current context bullish absorption, bearish absorption, defended, failed, or mature? This lifecycle approach is the main design difference. The first event creates the zone; the later candles tell the story. 🧭 Difference From Other AGPro Scripts This script was designed to sit in a separate lane from existing AGPro volume and price-action tools. It is not Volume Climax Detector. Volume Climax Detector focuses on extreme participation and climax-style events. Volume Absorption Zones focuses on compressed effort: elevated volume with limited spread and a forward zone that can later defend or fail. It is not Relative Volume Pressure Map. Relative Volume Pressure Map classifies broader relative-volume pressure and pressure efficiency. Volume Absorption Zones does not try to build a broad pressure regime. It isolates concrete absorption ranges and follows their lifecycle. It is not Volume Delta Imbalance Map. Volume Delta Imbalance Map is built around flow imbalance behavior. Volume Absorption Zones does not estimate bid/ask delta, CVD, or directional transaction flow. It stays OHLCV-native and uses candle structure plus relative volume effort. It is not Volume Profile Acceptance Ladder or a POC tool. This script does not build volume profile bins, value area, POC magnets, acceptance ladders, or auction distribution zones. Its zones come only from absorption-candle conditions. It is not a general support/resistance drawer. The boxes are not swing highs, swing lows, pivots, order blocks, or manually projected support/resistance areas. A box appears only when the absorption engine detects high effort, compressed result, close-location control, and sufficient quality. That separation is important: the script is not a renamed version of another AGPro concept. Its role is absorption-zone lifecycle tracking. ⚙️ How The Engine Works The script evaluates each candle through a structured sequence: 1. Volume Effort Current volume is compared with a rolling volume baseline. The event must show elevated participation before any absorption zone can be created. 2. Spread Compression The candle range is compared with a recent spread baseline. A qualifying event needs limited price travel relative to normal range behavior. 3. Close Location Bullish absorption requires the close to finish in the upper part of the candle. Bearish absorption requires the close to finish in the lower part of the candle. 4. Absorbed Wick Share The script checks whether the candle leaves enough absorbed-side structure to define a useful zone. 5. Absorption Quality Effort, compression, and close-location behavior are blended into a quality score. This helps filter weaker events and keeps the chart focused on stronger absorption structures. 6. Zone Projection When the event qualifies, the script draws a rectangular zone and extends it forward for the selected number of bars. 7. Invalidation Level Each zone receives an ATR-buffered invalidation line beyond the absorption range. 8. Defense / Failure Tracking After the zone is created, the script tracks whether price defends the range or closes beyond invalidation. 📦 Zone States Active The zone has been created and remains unresolved. Defended Price interacts with the zone and closes back in favor of the zone direction. Failed Price closes beyond the ATR-buffered invalidation level. Mature The zone remains active beyond the selected age threshold. These states help the user understand whether an absorption zone is still relevant, has been respected, or has lost its structure. 📊 AGPro Panel The dashboard summarizes the latest absorption context without requiring the user to inspect every box manually. Panel fields: - Absorption Side - Effort Score - Spread Compression - Follow-through - Zone Status - Zone Age The panel follows the AGPro publication layout: - Single merged blue header row. - Header contains only the script panel title. - Adjustable panel location. - Adjustable panel theme. - Adjustable panel font size. 🎯 Visual Design The script is designed to be readable on clean publication charts: - Bullish zones use the AGPro teal state color. - Bearish zones use the AGPro pink state color. - Failed zones shift to the neutral state color. - Defended zones shift to the accent state color. - Invalidation lines are dotted and subtle. - Event labels are offset from candles so they remain visible. - Label cooldown and maximum-label settings keep density under control. - Active zone count is capped for performance and readability. The default visual style is intentionally active, because absorption is easier to understand when the zone lifecycle is visible on the chart. 🔔 Alerts Included alert conditions: - Bullish Absorption Zone - Bearish Absorption Zone - Absorption Zone Defended - Absorption Zone Failed These alerts are tied to the same lifecycle states shown on the chart. 🛠 Key Inputs Volume Baseline Length Controls the lookback used to normalize current volume. High Effort Threshold Defines how much relative volume expansion is required before a candle can qualify. Spread Baseline Length Controls the range baseline used for spread compression. Maximum Spread Ratio Defines how compressed the candle must be relative to its baseline. Strong Close Location Controls how strongly the candle must close toward the active side. Minimum Absorbed Wick Share Requires visible absorbed-side candle structure before a zone can be accepted. Minimum Absorption Quality Filters events by the combined effort, compression, and close-location score. Zone Extension Bars Controls how far absorption boxes project forward. Max Active Zones Caps the number of active boxes retained on the chart. Invalidation Buffer ATR Controls the ATR buffer used for each zone's invalidation level. Mature Zone Age Defines when an unresolved zone is considered mature. Max Zone Memory Bars Removes older zones so the chart remains focused on recent, visible absorption context. Label Cooldown Bars Controls spacing between event labels. Max Event Labels Controls the maximum number of retained labels. Label Font Size / Panel Font Size Both default to Normal and can be adjusted from settings. 🧩 Best Use Volume Absorption Zones is designed for traders who want to study: - High-effort, low-result candles. - Absorption zones that remain visible after the initial event. - Whether later price action defends or fails those zones. - Market areas where volume expands but price travel remains compressed. - Weekly, daily, and intraday absorption structures without needing a lower-pane volume dashboard. The script can be used across symbols and timeframes where PulseWire volume data is available. The quality of results depends on the instrument, session structure, liquidity, and reliability of the volume feed. 🔍 Limitations & Transparency This script uses standard PulseWire OHLCV data. It does not access order book data, bid/ask data, footprint data, true delta, or exchange-native transaction flow. The absorption model is rule-based. It approximates absorption through relative volume effort, spread compression, close-location behavior, wick/body structure, and later zone interaction. It does not predict future price movement and it does not issue buy or sell commands. It organizes absorption context on the chart so users can evaluate how price behaves around those zones. Different instruments and timeframes may require input adjustments. Thin markets, irregular volume feeds, major gaps, and unusual sessions can affect event quality. ✅ Chart Reading Guide For the clearest view, use a clean chart with only this script loaded. The boxes, labels, dotted invalidation lines, and panel are designed to explain the absorption lifecycle without requiring additional overlays.

Indicator

ICT Smart Money Footprint [AGPro Series]ICT Smart Money Footprint 🔷 OVERVIEW ICT Smart Money Footprint is a multi-timeframe price action engine that maps institutional liquidity behavior directly onto your chart. It combines higher-timeframe reaction zones (BSL/SSL) derived from swing pivots with candle-by-candle lower-timeframe footprint states — Liquidity Grab, Displacement, and Reclaim — into one cohesive visualization. A live panel tracks session bias, daily event counts, and zone lifecycle, giving price action traders a complete context window for ICT-style analysis across every timeframe. 🧭 UNIQUE EDGE Most Smart Money Concept indicators plot every swing as a zone, producing cluttered charts that obscure the very structure they aim to reveal. This tool takes a different route. It separates the question "where is liquidity?" (answered at HTF with wide, contextual zones) from "what is price doing right now?" (answered at LTF with footprint labels). The two layers communicate through a single panel and a shared color palette, so the trader always sees both the macro landscape and the tactical footprint without layering multiple scripts. Priority filtering ensures only the highest-conviction event is printed per bar, and confluence windowing prevents label clustering. ⚙️ METHODOLOGY The script runs two parallel engines. The HTF Zone Engine pulls pivot highs and lows from a higher timeframe using request.security with lookahead disabled. Each confirmed pivot anchors a reaction zone sized by HTF ATR × 1.5, ensuring natural visibility on any chart view. Buy-Side Liquidity (BSL) zones form above price at pivot highs; Sell-Side Liquidity (SSL) zones form below price at pivot lows. Zones extend right via line.new with extend.right and a linefill between the two edges. When price tags a zone, the zone is marked mitigated: its lines switch to dashed style, width drops, color fades, and right extension freezes at the touch point. The LTF Footprint Engine evaluates each confirmed candle for three events. Liquidity Grab triggers when price sweeps the prior LTF swing with a buffer and closes back inside range in the opposite direction. Displacement triggers when candle range exceeds ATR × multiplier and the candle breaks the prior bar's extreme. Reclaim triggers when price recovers a recently lost swing level within a 20-bar window. A priority filter (DISP > LG > REC) prints only the strongest event per bar and direction. A session bias score accumulates these events and resets daily, tinting the chart background and updating the panel in real time. 📡 SIGNALS & ALERTS Six alert conditions are built in: • Liquidity Grab (bull or bear) • Displacement (bull or bear) • HTF Mitigation (any zone tagged) • Reclaim (bull or bear) • Bias Turned Bullish • Bias Turned Bearish All alerts include ticker and interval placeholders for multi-chart monitoring. 🎛️ KEY INPUTS HTF Source — Auto scales the higher timeframe to your chart (15m→4H, 1H→D, 4H→W, 1D→M), or pick a manual HTF. HTF Pivot Length — controls strength threshold of liquidity zones. HTF Zone Height (ATR x) — default 1.5; tune for wider or tighter zones. LTF Pivot Length — swing sensitivity for LG and REC detection. Displacement ATR Multiplier — default 2.0; raise for only the most explosive candles. Sweep Buffer — extra cushion above or below swing levels for LG qualification. Confluence Window — suppresses back-to-back same-direction labels. Session Bias Band — subtle background tint reflecting daily event accumulation. Panel Location, Theme, Font Size — full control over on-chart presentation. 🧩 HOW TO USE Start with your normal trading timeframe. The HTF Source set to Auto will anchor the zones to a relevant higher timeframe. Watch how price interacts with the BSL and SSL zones: unmitigated HTF zones act as liquidity targets and reaction areas, while mitigated (dashed) zones mark where liquidity has already been absorbed. Use the LTF footprint labels to read the tactical story inside those zones. A Liquidity Grab near an SSL zone hints at institutional accumulation. A Displacement candle after an LG often precedes a structural shift. A Reclaim of a recently lost level signals inducement and potential continuation. The panel's Session Bias gives you a running directional read; when it flips, an alert can fire. Traders typically combine this tool with their own execution framework: HTF zones for bias and target selection, LTF footprints for timing and confirmation. The indicator provides the map; risk management, entry rules, and position sizing remain the trader's responsibility. ⚠️ LIMITATIONS & TRANSPARENCY This indicator is an analytical mapping tool, not a trading strategy. It identifies structural patterns and plots them for visual analysis. HTF zones rely on request.security with lookahead disabled, which means new zones appear only after the HTF pivot is fully confirmed — this introduces a natural lag consistent with non-repainting practice but means some reactions may occur before the zone is drawn. LTF footprint labels are confirmed on bar close. Intrabar signals during live bars may flicker until the bar closes. Different market conditions produce different zone densities. Ranging markets generate more mitigated zones; trending markets leave more unmitigated zones above or below price. Use the Max Active Zones input to cap chart clutter. Past structural patterns do not guarantee future outcomes. Liquidity sweeps can mark reversals or simply precede continuation moves. Always validate signals with your own analysis and broader market context. 📌 RISK DISCLOSURE This script is provided for educational and analytical purposes only. It does not constitute financial advice, investment advice, or a recommendation to buy or sell any asset. Trading involves substantial risk of loss. Past performance does not guarantee future results. Users are solely responsible for their trading decisions, risk management, and position sizing. The author assumes no liability for any outcome arising from the use of this indicator.

Indicator

Institutional Candle Detector [AGPro Series]🕯️ Institutional Candle Detector Every trader has stared at a massive candle and asked the same question: "Was that the start of a move, the end of one, or just noise?" Most indicators stop at detection — they paint the candle, drop a label, and walk away. This one keeps watching. Institutional Candle Detector uses a dual-track engine. The body-driven track flags high-conviction candles where ATR-normalized body size and relative volume both expand together, then classifies each event by body/wick geometry. The independent absorption track captures a different signature entirely — low-body candles on extreme volume, the classic aggression-absorbed footprint that body-only detectors miss. Every detected event is then re-evaluated over the following bars to produce a measurable outcome scorecard. 🔹 OVERVIEW The script scans each bar for two separate, mutually-exclusive institutional signatures: • Body-driven events. Body must exceed a multiple of ATR AND volume must exceed a multiple of its rolling average. Classified by geometry into Continuation, Reversal or Exhaustion. • Absorption events. Volume extremely elevated BUT body contained — the market paid for a big move and did not get one. Price was absorbed. Every detected candle is then given a reaction zone projected forward, and its outcome is automatically tagged after the configured look-forward window — Follow-Through (FT), Reverse (RV) or Consolidation (CN). The panel accumulates aggregate statistics across the loaded chart so the trader can see which candle type actually works on their instrument and timeframe. 🔸 UNIQUE EDGE What separates this tool from generic "big candle" or "volume spike" indicators: • Dual-track detection. A single filter cannot capture both explosive moves and absorption. This script runs two engines in parallel with independent thresholds. • Four-class geometric taxonomy, each backed by a distinct detection path. Continuation and Reversal fire from the body-driven track with different geometry. Exhaustion catches the mid-profile edge cases. Absorption runs entirely off its own volume-first track. • Automatic after-behavior tracking. Each event is re-examined after N bars and tagged with an outcome code. This is the part most scripts omit — and it's where edge lives. • Aggregate statistics panel. Follow-through rate, reverse rate, consolidation rate, and per-class counts are computed continuously. The panel tells you whether institutional candles on this asset actually extend, reverse, or fade. • Forward-projected zones, colored by class. Body-driven bull/bear events use state colors. Absorption uses an indigo accent so the rarer signature is instantly recognizable. Reversal zones use the contrarian color to emphasize the expected directional flip. 🔹 METHODOLOGY Body-Driven Track (produces CONT, REV, EXH) – Body is measured as absolute (close − open) and required to exceed Body × ATR multiple. – Volume is required to exceed a configurable multiple of its SMA average. – An optional wick filter rejects candles where total wick exceeds the body beyond a given ratio, removing wide-range noise that looks institutional but is not. – Continuation: body% ≥ configured threshold (clean directional close). – Reversal: opposing wick% ≥ configured threshold (sharp rejection after initial push). – Exhaustion: passes the dual-gate but falls into neither clean category — mid profile, often late in a move. Absorption Track (produces ABS) – Volume must exceed an independently configurable multiple (higher than body-driven default). – Body must be small — below a max Body × ATR and below a max Body / Range. – When absorption fires, it takes precedence over body-driven classification. After-Behavior Layer – After lookFwd bars, the script compares the extreme price move in each direction against the original body size. – If same-direction extension ≥ ftPct × body → Follow-Through (FT). – If opposite-direction retrace ≥ revPct × body → Reverse (RV). – Otherwise → Consolidation (CN). Aggregate counters accumulate across the loaded chart, producing a running scorecard visible in the panel. 🔸 SIGNALS, STATES & MARKERS On-chart signals • Institutional body recolored by class — bull/bear direction for CONT and EXH; contrarian color for REV; accent color for ABS. • Directional triangle marker above/below the bar. • Classification label: INST-Bull 3.2x CONT or INST-Bear 5.4xV ABS format, ASCII only. Labels offset from the candle to stay readable on dense charts. • Reaction zone box projected forward from the candle's high-low range, color-coded by class. • Outcome marker (FT / RV / CN) plotted lookFwd bars after the event. Alerts available • Institutional Continuation • Institutional Reversal • Institutional Absorption • Institutional Exhaustion All four alerts fire on confirmed bars only. 🔹 KEY INPUTS Detection Core (body-driven track) – ATR Length (default 14) – Volume Average Length (default 20) – Min Body × ATR (default 2.0) – Min Volume Multiple (default 2.5) – Wick filter toggle and max Wick/Body ratio (default 2.5) Absorption Track – Enable Absorption Detection – Absorption Min Volume Multiple (default 4.0) – Absorption Max Body × ATR (default 1.5) – Absorption Max Body / Range (default 0.40) Classification – Continuation body% threshold (default 0.60) – Reversal opposing-wick% threshold (default 0.40) After-Behavior – Look-forward bars (default 5) – Follow-through threshold as fraction of body (default 0.50) – Reverse threshold as fraction of body (default 0.60) Visuals – Show/hide zones, zone projection length, opacity, max active zones – Label size (default Small; increase if labels feel too compact) – Institutional border width – Outcome marker toggle Panel – 8-position panel placement – Dark / Light theme – Font size (default Normal) – Recent events mini-list toggle 🔸 HOW TO USE 1. Start with defaults on a liquid asset. 4H is a strong baseline; 1H for active traders; Daily for swing context. On Daily, consider lowering Min Body × ATR to 1.5 if events are too rare. 2. Watch the panel accumulate events over two to four weeks on your instrument. The follow-through rate tells you whether institutional candles on this chart tend to extend or fade. 3. Trade-context usage: – Continuation with a high historical follow-through rate on this asset → trend trades in candle direction after pullback into the zone. – Reversal with a high historical reverse rate → fade setups at key levels. – Absorption → aggressive flow was met by an equal or greater defender; often precedes a reversal or compression phase. – Exhaustion → proceed with caution; frequently a late-move signature where the trend is losing clean structure. 4. Reaction zones act as provisional supply/demand. A retest of a zone with another institutional event near it is a confluence worth noting. 5. Tune thresholds per asset. High-liquidity instruments may need Body × ATR of 2.5+ to keep events selective; low-liquidity pairs can go down to 1.5. Absorption volume multiple can also be adjusted upward on already-volatile instruments. 🔹 LIMITATIONS & TRANSPARENCY • This is an analytical indicator, not a strategy. No entry, exit, or stop logic is defined and no performance claims are made. • Aggregate statistics are computed over the loaded chart window and will shift as more bars load or as timeframes change. • Volume quality depends on the data feed; exchange-reported volume differs across sources for the same asset. • Follow-through evaluation uses a fixed look-forward window; real trade management will differ. • All results are historical and descriptive. Past behavior of any candle class does not guarantee future behavior. 🔸 RISK DISCLOSURE Trading carries substantial risk. This tool is provided for analytical and educational purposes. Do your own research. Use position sizing and risk management appropriate to your account. Nothing in this script constitutes financial advice.

Indicator

Round Number Magnet Map [AGPro Series]Round Number Magnet Map ════════════════════════════════════════ 🔹 OVERVIEW Round numbers act as psychological magnets on every liquid market. Traders cluster stop orders, limit orders, and mental entries around levels like 2000, 2400, 50000. These levels attract price, get tested repeatedly, and either hold with sharp reactions or break with decisive momentum. Yet most round-number tools ship a hard-coded list (100, 500, 1000) that works on some charts and fails on others. Round Number Magnet Map is a psychological level engine that detects the right round numbers for any symbol automatically, tracks every touch with a composite reaction grading system, and ranks the strongest magnets in a professional leaderboard. It works out of the box on Bitcoin at 100k, on Ethereum at 2k, on Solana at 10, on EUR/USD at 1.05, on the S&P 500 at 5000, and on gold at 2400 — no configuration required. Traders who prefer manual control can override the auto-detected tiers with their own comma-separated list. The indicator is asset-agnostic, non-repainting, bar-confirmed, and optimized for speed. It is designed to be a permanent chart companion on any timeframe. 🔹 UNIQUE EDGE What separates Round Number Magnet Map from generic round-number indicators: 1. Asset-aware auto-detection. The script reads current price magnitude and selects the correct tier spacing automatically — 10000/5000/1000 for high-cap assets, 100/50/10 for mid-cap, 0.01/0.005/0.001 for forex majors. Three nested tiers render simultaneously so both major and minor psychological levels are visible with a clear visual hierarchy. 2. Composite reaction grading. Each touch is not just counted — it is graded. The script combines three inputs: ATR reaction (how many ATRs price traveled after the touch), wick rejection ratio (how strongly the touch bar rejected the level), and relative volume (whether institutional flow confirmed the reaction). The result is a 0-100 score mapped to A/B/C/D grades, so traders can distinguish a truly respected magnet from a level that price simply grazed. 3. Broken-level recovery logic. Most tools mark a level as "broken" the first time price closes through it and leave it broken forever. That is wrong on round numbers — price oscillates around 2000, 3000, 10000 repeatedly across months and years. This engine un-breaks a level the moment price returns to its zone, so the map always reflects current reality. 4. On-chart leaderboard. The panel ranks the top 5 most-touched levels visible in the current chart window, with touch count and composite grade, so the strongest magnets are always one glance away. 5. Clean by design. Rendering is restricted to an ATR-scaled window around current price, with optional toggles to hide broken and untouched levels. The chart stays readable even on high timeframes where dozens of round numbers would otherwise clutter the view. 🔹 METHODOLOGY Tier generation. When auto-detect is enabled, the script classifies current price into a magnitude bucket (>10000, 1000-10000, 100-1000, 10-100, 1-10, <1, etc.) and assigns a three-tier spacing. Tier 0 is the major step, tier 1 is a half-step, tier 2 is a fine step. All three tiers are generated around current price within an ATR-scaled search range, deduplicated, and capped at a configurable maximum (default 20). Touch detection. Each level is surrounded by a zone of thickness (ATR × configurable multiplier, default 0.20). A touch is registered when a bar's high-low range intersects the zone and at least N bars have passed since the last touch on that level (cooldown, default 5). This prevents a single consolidation from inflating the touch count. Reaction grading. Exactly N bars after a touch (default 5), the script computes: • ATR reaction (60% weight): maximum favorable excursion from the level in the direction of the test, normalized against a target of 2 ATRs = score 100. • Wick rejection (25% weight): the rejection wick on the touch bar relative to the bar's range. • Relative volume (15% weight): volume on the touch bar relative to the 20-bar average. The three components are combined into a single 0-100 composite score. Scores of 80+ are grade A, 65-80 are grade B, 45-65 are grade C, below 45 are grade D. Break detection. A level is marked as broken only when, during a reaction grading, price has closed beyond the zone by an additional 0.3 ATR in the opposite direction of the test. This strict criterion avoids false breaks from single wicks or low-conviction closes. Broken levels are un-marked automatically when price returns to the zone. Rendering. Active non-broken levels render as solid blue lines with an optional S/R-style zone box. Broken levels render as dashed gray lines with a BRK badge. Labels show price, touch count, and grade. Priority-0 (major) levels render with increased line width, and levels within 1 ATR of price render thicker still (magnet effect). 🔹 SIGNALS & ALERTS The script generates four non-repainting, bar-confirmed alert conditions: • Touch — price has entered a round-number zone. • Held (Strong Reaction) — a touch has resolved with a composite score ≥ 60, meaning the level held with meaningful reaction strength. • Broken — a level has been decisively broken by a strong close beyond the zone. • Magnet Approach — price is within 0.5 ATR of a level, approaching without yet touching. Each alert fires at bar close and carries ticker and timeframe tokens for routing to external automation. 🔹 KEY INPUTS Detection • Auto-Detect Tiers — asset-aware tier selection (recommended). • Custom Tiers — comma-separated override (e.g., "1000,500,100" for BTC). • Level Search Range — how far from price to generate levels, in ATR-scaled units. • Max Active Levels — hard cap on rendered levels (default 20). Touch & Zone • Zone Thickness — size of each round-number zone in ATR units (default 0.20). • ATR Length — period for ATR used in zone and reaction calculations (default 14). • Touch Cooldown — minimum bars between touches on the same level (default 5). • Reaction Window — bars after a touch used for reaction grading (default 5). Reaction Grading • Weight: ATR Reaction / Wick Rejection / Relative Volume — configurable composite weights. Weights are normalized automatically if they do not sum to 1. • ATR Normalization Target — the ATR-reaction value that maps to score 100. Visuals • Show Zones, Show Level Labels, Hide Broken Levels, Hide Untouched Levels, Magnet Effect. • Far Levels Transparency, Label Size, Label Offset. Panel • Show Panel, Panel Location (6 options), Panel Theme (Dark/Light), Panel Font Size. Alerts • Independent toggles for Touch, Held, Broken, Magnet Approach. 🔹 HOW TO USE The indicator is designed for discretionary trading and framework-based decision making. A few practical patterns: 1. Use the nearest Above and Below levels in the panel as your immediate target and invalidation reference. The Strongest line on the panel is the highest-conviction magnet in view. 2. Grade A and B levels are historically respected by this market. When price approaches one, expect a reaction. When price approaches a Grade D level, expect a clean pass-through or a trap. 3. Confluence with other tools. Round numbers combined with a swing high/low, a moving average, or a Fibonacci level are far more likely to hold than a round number alone. Treat this indicator as one layer in a stacked decision framework. 4. Timeframe selection. Use higher timeframes (1D, 4H) to identify the dominant magnets for position trading, and drop to lower timeframes (1H, 15m) for execution around those same levels. 5. Broken levels are still information. A dashed level with 20+ historical touches is a zone where liquidity has been swept and where retests often provide re-entry opportunities. 🔹 LIMITATIONS & TRANSPARENCY • This tool identifies psychological levels and grades their historical reaction quality. It does not predict price direction and it is not a trading strategy. Use it as part of a complete decision framework. • Reaction grades are historical, not forward-looking. A level that held five times may still break on the next test, especially in strong trending conditions or during high-impact news events. • Touch counts depend on chart history. On symbols with limited history, recent levels may have fewer touches than their true significance warrants. • The reaction window is fixed (default 5 bars). Reactions that take longer to develop will be graded as weaker than they truly are. Adjust the window to match the instrument and timeframe. • Extremely low-volume symbols may produce noisy reaction scores because the relative-volume component becomes unreliable. Reduce its weight to 0 in such cases. 🔹 RISK DISCLOSURE This indicator is a technical analysis tool for educational and discretionary decision support. It does not constitute financial advice, investment advice, a solicitation, or a recommendation to buy or sell any instrument. Past reactions at any level do not guarantee future behavior. All trading involves substantial risk of loss. You are solely responsible for your trading decisions and for managing your capital.

Indicator

Break-Retest Quality [AGPro Series]Break-Retest Quality 🎯 OVERVIEW Break-Retest Quality is a precision-focused structure toolkit that detects pivot-based breaks of structure (BOS) and grades the first retest of the broken level using a transparent, multi-factor quality score. Instead of only drawing a break line and leaving you to guess whether the retest "looked clean", the script quantifies the retest with a 0-100 score and an A / B / C / F letter grade so you can quickly separate high-conviction pullbacks from low-quality ones. It is a discretionary context tool built for price action traders, SMC / ICT practitioners and anyone who builds setups around break-and-retest logic. The system is fully automated, non-repainting after confirmation, and works on any symbol and timeframe that PulseWire supports. 📐 UNIQUE EDGE — WHAT MAKES IT DIFFERENT Most break-of-structure indicators stop at drawing a line and an arrow. Break-Retest Quality goes further: 🔹 Every retest is scored on six independent factors and translated into an A / B / C / F grade 🔹 The acceptance zone is an ATR-scaled rectangle that changes color and state as the setup evolves (live WATCH → graded RETEST) 🔹 A "Min Grade To Display" filter keeps weak retests off the chart, so the visual footprint stays clean 🔹 A right-edge WATCH tag pins the currently active level so you never lose track of the live setup 🔹 A compact two-line retest marker shows grade, score and a short outcome tag in a minimal footprint 🔹 Built-in cooldown and single-retest-per-break logic prevent label clutter on choppy price action This is not a repackaged BOS indicator — it is a quality filter on top of BOS / retest logic. 🧪 METHODOLOGY 1. STRUCTURE DETECTION Pivot highs and lows are detected with a user-defined Pivot Length. A break is registered when price clears the most recent pivot by at least Min Break ATR Filter × ATR, either on a close (default) or on a wick. 2. RETEST TRACKING After a confirmed break, the script opens an acceptance zone of ± Retest Tolerance ATR × ATR around the broken level and watches for the first price revisit within Max Bars For Retest. 3. QUALITY SCORING (0-100) The first retest is graded on six weighted factors: 🔸 Reclaim (25 pts) — how decisively the close reclaims the correct side of the level 🔸 Rejection (20 pts) — wick / body composition on the retest bar 🔸 Depth (20 pts) — how close the extreme of the retest bar lands to the level (no excessive overshoot) 🔸 Speed (15 pts) — how quickly the retest prints after the break 🔸 Volatility (10 pts) — bar range discipline relative to ATR 🔸 Volume (10 pts, optional) — relative volume vs 20-bar SMA Final score → Grade: A ≥ 80, B ≥ 65, C ≥ 50, F < 50. 4. CONFIRMATION LOGIC A retest is marked "confirmed" only if the score meets the Min Grade For Confirmation threshold AND the close lands on the correct side of the broken level. 🔔 SIGNALS & ALERTS Three PulseWire alert conditions are exposed: 🔹 Structure Break Detected — fires the moment a valid break is registered 🔹 First Retest Detected — fires on the first qualifying revisit inside the acceptance zone 🔹 High-Quality Retest Confirmed — fires only when the graded retest meets the confirmation threshold ⚙️ KEY INPUTS STRUCTURE • Pivot Length, Use Close Confirmation, Min Break ATR Filter, ATR Length RETEST • Max Bars For Retest, Retest Tolerance ATR, Cooldown Bars After Completed Setup, Resolved Zone Extension SCORING • Show Numeric Score / Grade, Use Volume Confirmation, Min Grade For Confirmation, Min Grade To Display VISUALS • Show Break Line / Labels / Retest Marker / Retest Zone / Watch Zone Text / Resolved Zone Text / Active Level Glow / Right-Edge Watch Tag / Invalidation Line / Outcome Text, Use Grade Colors, Zone Forward Extension, Label Size PANEL • Show Panel, Panel Position, Panel Font Size, Show Last Result Row RUNTIME • Keep Last Setups (controls how many historical setups stay on the chart) 🧭 HOW TO USE 1. Add Break-Retest Quality to any chart and timeframe. Adjust Pivot Length to match the structure you care about (lower on intraday, higher on swing). 2. Wait for a BRK▲ or BRK▼ label to print — this confirms a structure break. 3. Observe the live acceptance zone and the right-edge WATCH tag. These mark the level and the remaining retest window. 4. When price returns to the zone, read the two-line retest marker: grade + score on the top line, short outcome tag (Strong / Valid / Weak / Failed) on the bottom line. 5. Use the panel to monitor live state, active level, remaining window and the last completed result with its full outcome description. 6. Combine with your own confluences — higher-timeframe bias, liquidity levels, session context, volume profile — before acting on any signal. ⚠️ LIMITATIONS & TRANSPARENCY 🔹 This is an analytical and educational tool, not a strategy. It does not generate buy / sell orders and does not measure historical performance. 🔹 Grades describe the geometric and relative-volume quality of the retest bar at the moment it prints. They are not predictions of future price movement. 🔹 Scores calculated at bar close are final; intra-bar readings can shift until the bar closes. 🔹 The volume factor depends on exchange-supplied volume data. Turn it off on instruments where volume is unreliable or missing. 🔹 Pivot-based structure is sensitive to the Pivot Length setting. Choose it deliberately for the timeframe and symbol you are analyzing. 📢 RISK DISCLOSURE Trading involves substantial risk and is not suitable for every investor. Past price behavior is not indicative of future results. This indicator is provided for educational and analytical purposes only and does not constitute financial advice, investment advice, or a solicitation to trade any instrument. Always perform your own research and risk management before acting on any signal.

Indicator

In-depth global business and economic analysis Comprehensive trading education and market insights