SMC

SMC Structures and FVG [Produced by Wanfeng]中文简介 SMC 结构综合指标 | FVG 公允价值缺口 + BOS/CHoCH 结构突破 + 趋势防守位 + 区间比例线指标核心功能 FVG 公允价值缺口自动识别传统 3 根 K 线标准供需缺口，区分看涨 / 看跌缺口；价格触碰缺口后自动变灰淡化，支持一键收缩被触碰区间，可自定义显示历史缺口数量；不适配跳空大缺口行情。 SMC 结构识别（BOS/CHoCH）内置回溯周期算法自动判定市场结构：顺势突破 BOS、逆势转换 CHoCH；支持自定义线条颜色、线型、粗细，可限制图表留存历史突破标记数量。假破待确认虚线价格试探结构高低但未收盘突破时，自动绘制待确认虚线；区分普通顺势假破、防守位假破两种样式，直观分辨有效突破与诱多 / 诱空假破。动态趋势防守位跟随当前市场结构实时切换防守基准：上涨趋势以阶段低点为防守、下跌趋势以阶段高点为防守；出现防守位假破时自动切换至假破极值作为临时防守，加粗实线标注并附带文字标签。区间比例分割线基于当前完整结构区间自动计算自定义百分比分割线（默认 50% 中位线），同步适配假破后的区间重构；可显示百分比数值标签，辅助找订单流关键支撑阻力。参数分组说明公允价值缺口：控制 FVG 显示、配色、触碰收缩、历史数量结构突破：结构回溯周期、BOS/CHoCH 线条、当前完整结构轮廓线、假破待确认线防守位：防守实线配色粗细、防守位假破虚线开关与样式结构比例线：自定义分割百分比、比例线样式、数值标签开关使用提示结构回溯 K 线参数为算法基准，不建议随意修改，修改会破坏防守位判定逻辑； FVG 仅识别标准 3K 缺口，指数、外汇大幅跳空行情下缺口识别会失真；突破触发自动警报，BOS 代表顺势延续、CHoCH 代表趋势反转信号；所有线条、色块透明度、线型、线宽均可自由自定义适配个人图表风格。 English Introduction SMC Market Structure All-in-One Toolkit | FVG + BOS & CHoCH Breakout + Dynamic Defense Level + Ratio Split Line Core Features Fair Value Gap (FVG) Detect standard 3-bar institutional liquidity gaps (bullish & bearish). FVG boxes turn gray once mitigated, with optional shrink function for touched zones. Adjustable max historical FVG count. Not recommended for large gap/jump markets. SMC Structure Detection (BOS / CHoCH) Built-in lookback algorithm to identify institutional market structure: BOS (Break of Structure, trend continuation) & CHoCH (Change of Character, trend reversal). Fully customizable line color, style, width, and limited historical breakout markers to avoid chart clutter. Pending Fake Breakout Dashed Line Draw temporary pending lines when price tests swing high/low without close breakout. Separate styles for regular trend fakeouts and defense level fakeouts, easily distinguish valid breaks vs liquidity hunts. Dynamic Trend Defense Level Auto-switch defense baseline based on current market bias: swing low for uptrend, swing high for downtrend. Temporarily shift defense level to fakeout extreme when liquidity hunt occurs, with thick solid line and text label. Range Ratio Split Line Auto calculate user-defined percentage split level (default 50% midpoint) over active market range, compatible with post-fakeout restructured ranges. Optional percentage value label for key order flow support/resistance zones. Input Groups Fair Value Gap: Toggle FVG display, color palette, mitigate shrink, max historical boxes Market Structure: Structure lookback period, BOS/CHoCH line settings, full swing structure outline, pending fake breakout lines Defense Level: Solid defense line config, toggle & style for defense fakeout dashed lines Range Ratio Line: Custom split percentage, ratio line appearance, value label switch Important Notes Structure lookback bar count is core algorithm parameter, DO NOT modify arbitrarily; wrong value breaks defense level calculation. This FVG logic only works for standard 3-bar gaps; performance degrades on assets with massive overnight jumps/gaps. Built-in alert triggers on confirmed breakouts: BOS = trend continuation signal, CHoCH = trend reversal signal. Full customization of all line width, color transparency, dash/dot/solid styles to match your chart layout preference.

Indicator

Liquidity Structure Framework [PakunFX]Liquidity Sequence Framework Liquidity Sequence Framework (LSF) is a market structure analysis indicator designed to visualize the progression of liquidity events, structure shifts, and Fair Value Gaps (FVGs) within a single analytical framework. Instead of focusing on individual signals, the indicator organizes multiple market events into a sequential process, helping traders observe how price structure develops over time. The script combines swing structure, liquidity sweeps, trend filtering, and Fair Value Gap detection into a unified charting tool. Features External and Internal Swing Structure detection Liquidity Sweep identification (SSL / BSL) Bullish and Bearish Structure Shift detection Automatic Fair Value Gap (FVG) detection EMA-based trend filter Premium / Discount (Equilibrium) filter Configurable setup conditions Visual sequence tracking with alerts How it Works The indicator monitors market structure using external and internal swing highs and lows. When liquidity is swept beyond a previous swing level, a new sequence begins. The script then tracks whether price confirms a structure shift and subsequently forms a Fair Value Gap within a configurable sequence window. Trend filtering can be applied using Fast and Slow EMA conditions, while optional Premium / Discount and Fair Value Gap requirements allow users to customize how potential setups are displayed. Display Elements External Swing High / Low Internal Swing High / Low Liquidity Sweep markers (SSL / BSL) Structure Shift markers Active Fair Value Gap zones Fast and Slow EMA Equilibrium level Setup markers Alerts Alerts are available for: Liquidity Sweep Bullish Structure Shift Bearish Structure Shift Bullish Sequence Setup Bearish Sequence Setup These alerts are intended to notify users when predefined analytical conditions are detected. Notes Liquidity Sequence Framework is designed as a market analysis tool. It visualizes structural relationships between liquidity events and price development but does not generate trading recommendations or predict future market direction. Disclaimer This script is provided for educational and research purposes only. All calculations are based on historical price data. The displayed structures, Fair Value Gaps, and sequence conditions are intended to support chart analysis and should not be interpreted as guarantees of future market behavior or trading performance.

Indicator

Master Filter - Trend and Smart Money Zones Overview Master Filter combines a proprietary trend engine with the smart-money tools traders actually act on - EMA structure, Fair Value Gaps, Order Blocks and market-structure labels - in a single, clean overlay. Instead of stacking five separate indicators, you get one consistent read of where the trend is and where price is likely to react . Everything is computed on the current chart timeframe and updates live as new bars form. What's inside 1. The Master Filter © - trend & signals A triple-smoothed price baseline (TEMA) is tracked against an adaptive average that follows the highs in an uptrend and the lows in a downtrend. An ATR-based channel (length 365 x multiplier, smoothed) acts as a confirmation filter that aims to suppress false flips during chop. When direction confirms, the script prints a LONG / SHORT marker on the bar. You can optionally plot the high / middle / low channel lines. 2. EMA suite + smoothed mirrors EMA 100 / 200 / 300 / 365 for trend context, with a shaded zone between the 300 and 365 EMAs. Two optional "mirror" EMAs (a smoothed reflection of the 200 and 365) project the opposite side of price to frame mean-reversion zones. 3. Fair Value Gaps (current timeframe) Three-bar imbalances are drawn as boxes with a dashed mid-line and tagged with the chart timeframe. Live gaps extend to the current bar and are removed automatically once price trades back through them (mitigation). A "max visible" cap keeps only the most recent gaps. 4. Order Blocks (current timeframe) SMC-style order blocks are detected on structure breaks (price closing through the last swing high/low). The OB candle is selected within a bounded search window, with a volatility filter so an oversized, high-range bar isn't mistaken for the block. Each OB is drawn as a box plus dashed mid-line, kept per direction up to a configurable limit, and dropped on a strict break. A "max pivot age" setting skips stale blocks far from current price during strong trends. 5. Market structure - HH / HL / LH / LL Swing pivots are labelled as Higher High / Higher Low / Lower High / Lower Low (teal for higher, orange for lower) so structure shifts are visible at a glance. How to use Read the trend from the LONG/SHORT markers and EMA stack; trade with it. Use FVG and Order Block zones as areas to look for entries, partial exits or invalidation - not as automatic buy/sell signals. Confirm with HH/HL/LH/LL: continuation favours trend-aligned zones; a structure break warns of a possible shift. Settings Grouped by section - Main trend (length, multiplier, channel filter, plot channel), Moving Average (EMA lengths, mirrors, smoothing), Fair Value Gaps (show, max visible, colours), Order Blocks (show, max per side, search/structure length, max pivot age, colours), and HH/HL/LH/LL (show, swing length, lookback). Alerts Change of the trend - fires when the Master Filter direction flips. Notes This indicator is a decision-support tool, not a signal-for-hire system. It does not place orders and past behaviour does not guarantee future results. Always combine it with your own risk management.

Indicator

by master-trend

Strong Supertrend Engine | ProjectSyndicate Strong Supertrend Engine maps the session around a Supertrend trend-stop and power-ranks the with-trend zones where price is most likely to continue, not reverse. Every session it reads one decision from the prior completed session's daily Supertrend — is the session open above the Supertrend a green, buy-only regime or below it a red, sell-only regime — and then projects an ATR-scaled ladder of reaction zones around the session open. On top of the zones it draws the session's best continuation setups as zone-to-zone arrows: in a green regime it points up from a pullback zone to a target zone; in a red regime it points down from a rally zone to a target below. The whole tool runs on one idea: trade dips with the trend, not against it — buy dips into support while the Supertrend is green, sell rips into resistance while it is red, and favor the stronger-graded zones. This is the inverse of a fade tool. Across a broad multi-instrument study FX majors and crosses, gold and an index, fading stretched levels back to balance behaved like a coin flip, while with-trend pullback entries were the side that carried a modest, repeatable edge. Strong Supertrend Engine is built around that side. 🟢🔴 Summary how to trade this more details below, read entire guide. Best trade setups with this system is to buy dips, arrows highlight best entry zones / prices when price is trading above green ST zones. Likewise, sell rips, arrows highlight best entry zones on sell side / when price is trading below red ST zones. Detailed overview below. Run on lower TFs for best entries, i.e. M5 M10 M15 M30. 🟢🔴 The Supertrend Regime the master switch — The session open versus the daily Supertrend sets the only bias that matters. Open above the Supertrend ⇒ the core stop band renders green and the engine shows BUY-ONLY setups buy the dips. Open below ⇒ the band renders red and the engine shows SELL-ONLY setups sell the rips. A close back through the Supertrend flips the regime and recolors everything. You never fight the band: green means look for longs, red means look for shorts. 🧲 The Session Basis auction center — Each session's zone ladder is anchored to the session open by default Prior HL2, OHLC4 or Close optional. Price spends the day auctioning around this basis, so the inner zones sit exactly where price actually trades and the outer zones mark a genuine stretch. The basis is also the natural first reference a with-trend pullback works back through. 📊 ATR-Scaled Zone Ladder — Five escalating tiers are projected above and below the basis at calibrated ATR offsets 0.12, 0.25, 0.40, 0.55, 0.75 × ATR by default, drawn as clean equal-height shaded bands. The spacing is deliberately pulled in to where price genuinely travels intraday a typical session covers roughly half an ATR from the open, so the inner tiers get tagged often and the outer tiers mark the real extremes. A global width multiplier and per-tier offsets let you reshape the geometry for any instrument or timeframe. ES 🟩 The Core Supertrend Stop Band — The actual daily Supertrend value is drawn as a bold band — green support in an uptrend, red resistance in a downtrend. It is the trend's hard line: the trade thesis holds while price stays on the correct side of it, and a close through it is the regime flip and the natural hard stop. 🏷️ 0–10 Strength Grade & In-Zone Labels — Every zone carries a live 0–10 grade inside the band — the tier name with a ▲ / ▼ side marker, stars, the X.X/10 score and a tier word FORMING → WEAK → MODERATE → STRONG → ELITE. The grade blends tier extremity, volatility context, trend regime and with-trend alignment so the with-trend side is favored. Read it as a descriptive conviction ranking for which zone deserves attention — it is not a backtested win-rate. WTI 🏹 Continuation Setup Arrows the signature feature — For the last N sessions, the engine selects the best 2–4 with-trend setups per session and draws each as a zone-to-zone arrow that spans several zones 3 by default, so each arrow shows a meaningful directional trade, not a one-tier hop. In a green regime arrows run up from a pullback/dip zone, through the open, to a target zone above; in a red regime they run down from a rally/rip zone to a target below. Each arrow is labeled with the entry→target zones, the R multiple of the move, and a star grade. Setups are ranked by regime strength + momentum alignment + clean pullback depth, so the strongest, best-located trades surface first. 📈 Laguerre PPO Momentum Confluence — A daily, non-repainting Laguerre PPO reads whether momentum agrees with the regime. It boosts the score of aligned setups and can be set as a hard filter so only momentum-confirmed setups print. Up-momentum strengthens buy-dip setups in a green regime; down-momentum strengthens sell-rip setups in a red regime. BTC ⚙️ Uniform ATR Zone Height — Every tier shares one identical ATR-based thickness, centered on its level, for a clean, consistent look on any symbol or timeframe. 🎨 Regime & Strength Shading — Stronger zones render more opaque, weaker ones stay faint, and counter-trend zones are dimmed so the actionable with-trend side pops. Resistance tiers shade red, support tiers green, the core stop green/red by regime, and the arrows green for buys, red for sells. Arrow labels use black text for crisp readability on the colored tags. 🔒 Non-Repainting — Each session's regime, basis, zones, scores and arrows lock in from the completed prior session read with a confirmed offset and never change intraday. Zones span exactly one session and close cleanly at the boundary — no bleed into the next session. The last N sessions are kept default 10 and older ones are removed automatically. Silver 📋 Live Dashboard — A compact panel reports the current Regime BUY-ONLY / SELL-ONLY, Momentum up / down, the number of setups this session, the Trend, the Supertrend stop price, ATR, the distance from price to the stop in ATR, and the trend age in sessions. 🔔 Native Alerts — Dedicated Buy Continuation Setups and Sell Continuation Setups alerts the moment a new session's setups print, plus zone-touch, strong-zone, extreme-tier, core-stop-tag and Supertrend-flip alerts. 🔧 Fully Customizable — Supertrend ATR length and factor, basis source, the five tier offsets and global width multiplier, zone thickness, the four scoring weights and their lookbacks, the score filter, the Laguerre fast/slow gammas and momentum-filter toggle, arrow count 2–4, arrow span zones, spacing, width, colors and labels, dashboard position/size, transparency and shading — all adjustable. DAX 🎯 Why this is different — Most band tools draw static envelopes and leave you guessing which edge matters, and most "tops & bottoms" tools quietly ask you to fade strong moves. Strong Supertrend Engine does the opposite: it frames the session as a trend defined by the Supertrend, refuses to show counter-trend trades, and hands you the session's best with-trend continuation setups as labeled arrows from zone to zone. You read the regime green/red, the destination the arrow's target zone, and the conviction the score at a glance. 🚀 Apply to Gold XAUUSD, Silver, Forex, Crypto and Indices on any intraday timeframe. 🎯 How To Trade It — Two Approaches Everything hinges on the regime: green Supertrend = buy dips only, red Supertrend = sell rips only. Never fade the band. Use the stronger-graded zones and the printed arrows to pick the best-located entry. ◾ 1 BUY DIPS in a Green Supertrend Regime — open above the green ST This is the engine's core long thesis. The session open is above the green Supertrend, so the regime is BUY-ONLY and buy arrows point up from the dip zones toward higher targets. ▪️ Setup: wait for price to pull back / dip into a support zone below the open — prefer the stronger-graded zones higher score / more stars, ideally one a buy arrow points up out of, with Laguerre momentum up. ▪️ Entry: long on the dip into the zone, in the direction of the green regime the with-trend bounce. ▪️ Stop: below the entry zone — one tier deeper — with the green core Supertrend stop as the hard invalidation. A decisive close below the green ST flips the regime; the long thesis is then wrong, stand aside. ▪️ Targets: step up zone to zone toward the arrow's target each arrow spans ~3 zones — through the open into the upper tiers, banking partials at each tier and trailing with the trend. ⚖️ The cleanest version: price opens above a rising green Supertrend, dips into a STRONG/ELITE support tier, holds, and rotates back up through the open into the upper tiers — exactly the leg the arrow frames. The deeper-but-still-graded dips offer the better risk; the shallow ones trigger most often. ◾ 2 SELL RIPS in a Red Supertrend Regime — open below the red ST The mirror image. The session open is below the red Supertrend, so the regime is SELL-ONLY and sell arrows point down from the rally zones toward lower targets. ▪️ Setup: wait for price to rally / rip into a resistance zone above the open — prefer the stronger-graded red zones higher score / more stars, ideally one a sell arrow points down out of, with Laguerre momentum down. ▪️ Entry: short on the rip into the zone, in the direction of the red regime. ▪️ Stop: above the entry zone — one tier higher — with the red core Supertrend stop as the hard invalidation. A decisive close above the red ST flips the regime; stand aside. ▪️ Targets: step down zone to zone toward the arrow's target through the open into the lower tiers, banking partials and trailing the move. Rule of thumb: ⭐ Green Supertrend, open above it → buy dips into the stronger support zones, target the arrow's zones up. ⭐ Red Supertrend, open below it → sell rips into the stronger resistance zones, target the arrow's zones down. ⭐ When price closes through the Supertrend, the regime flips — wait for the new side before taking the next trade. EURUSD ⚠️ IMPORTANT NOTICE: Strong Supertrend Engine frames a Supertrend-defined trend and ranks the best with-trend continuation setups. The 0–10 score is a descriptive conviction ranking, not a backtested win-rate, and the with-trend edge measured in study was modest — these zones and arrows are decision support, not a standalone trade trigger. Always combine them with your own strategy, price-action confirmation and risk management. Past behavior does not guarantee future results.

Indicator

by ProjectSyndicate

Advanced Liquidity Sweep [HexaTrades]Advanced Liquidity Sweep is a Smart Money Concepts (SMC) indicator designed to automatically identify liquidity pools, equal highs and lows, liquidity sweeps, and potential reversal areas. Rather than simply detecting wick breaks, it evaluates each sweep using multiple confirmation factors and assigns a strength score, helping traders distinguish between minor stop hunts and higher-quality liquidity events. The indicator is designed for cryptocurrencies, stocks, forex, futures, commodities, and indices across all timeframes. What is Liquidity? Financial markets constantly search for liquidity before making significant moves. Retail traders often place: • Stop losses below swing lows • Stop losses above swing highs • Breakout orders above resistance • Breakdown orders below support These orders accumulate into liquidity pools. Large market participants frequently move prices into these areas to fill large positions before reversing or continuing the trend. This indicator automatically identifies those liquidity pools and highlights when they are swept. How it works : - Map the liquidity.: Confirmed pivot highs become BSL lines, pivot lows become SSL lines. You choose Major and/or Minor swing sizes. - Cluster equal highs/lows. Several highs (or lows) at nearly the same price form an EQH / EQL cluster, a bigger, juicier liquidity pool that scores higher. - Detect the sweep (on closed candles only). • Bearish: price trades above a BSL level but closes back below it. • Bullish: price trades below an SSL level but closes back above it. - Score it 0–100. Six factors rate how convincing the rejection was (see below). At/above your Strong threshold, it’s tagged STRONG. - Draw a sweep zone. Optionally turn each sweep into a supply/demand zone you can watch for re-entry, with optional auto-expiry. - Filter the noise. Optional Trend, Higher-Timeframe and Filter presets keep only the cleaner grabs. Features 🔶 Major & Minor Swing Detection The indicator detects both major and minor swing highs and lows. Major swings represent stronger institutional liquidity and usually produce higher-quality reactions. Minor swings identify shorter-term liquidity that is commonly targeted during intraday trading. Users can monitor: • Major swings only • Minor swings only • Both simultaneously 🔶Buy-Side Liquidity (BSL) Buy-side liquidity forms above previous swing highs. These areas usually contain: • Short stop losses • Breakout buy orders • Momentum entries When price trades above these highs before quickly closing back below, the indicator identifies a bearish liquidity sweep. 🔶 Sell-Side Liquidity (SSL) Sell-side liquidity forms below previous swing lows. These areas usually contain: • Long stop losses • Panic selling • Breakdown entries When price trades below these lows before closing back above, the indicator identifies a bullish liquidity sweep. 🔶 Equal Highs & Equal Lows Equal highs and equal lows are some of the strongest liquidity pools because many traders place stops at nearly identical price levels. The indicator automatically detects these structures using: • ATR-based tolerance • Percentage-based tolerance Equal liquidity levels are highlighted separately and tracked independently from normal swing liquidity. 🔶 Zone Colors Here are the zone and line colors used in this indicator and what each one means: 🔴 Red: Buy-Side Liquidity (BSL) - Represents swing highs where buy-side liquidity is concentrated. - Commonly contains short stop-loss orders and breakout buy orders. - These are active, unswept liquidity levels and potential targets for a bearish liquidity sweep. 🟢 Green: Sell-Side Liquidity (SSL) - Represents swing lows where sell-side liquidity is concentrated. - Commonly contains long stop-loss orders and breakdown sell orders. - These are active, unswept liquidity levels and potential targets for a bullish liquidity sweep. 🟠 Orange: Equal Highs / Equal Lows (EQH / EQL) - Marks two or more highs or lows formed at nearly the same price. - These levels are displayed using dashed lines and often contain larger clusters of resting liquidity. - Sweeps of Equal Highs and Equal Lows typically produce stronger, higher-probability trading opportunities. ⚪ Gray: Swept (Inactive) Liquidity - Indicates liquidity that has already been swept by price. - Once a level has been taken, it changes to gray and becomes inactive. - This helps distinguish spent liquidity from active levels that may still attract future price movement. Sweep Signal Colors 🟩 Bullish Liquidity Sweep -Appears when Sell-Side Liquidity (SSL) or an Equal Low (EQL) is swept. -Price trades below the liquidity level but closes back above it, confirming a bullish liquidity sweep. 🟪 Bearish Liquidity Sweep - Appears when Buy-Side Liquidity (BSL) or an Equal High (EQH ) is swept. - Price trades above the liquidity level but closes back below it, confirming a bearish liquidity sweep. 🔶 Liquidity Sweep Detection A liquidity sweep occurs when price temporarily breaks a liquidity level but fails to hold beyond it. For a valid sweep: Bearish Sweep • Price trades above Buy-Side Liquidity • The candle closes back below the level Bullish Sweep • Price trades below Sell-Side Liquidity • The candle closes back above the level Because the signal is generated only after the candle closes, the indicator does not repaint. 🔶Sweep Strength Score Every sweep receives a strength score from 0 to 100. The score combines multiple factors including: • Wick rejection • Candle body strength • Penetration distance beyond liquidity • Volume confirmation • Distance from the EMA • Equal High / Equal Low cluster strength Higher scores generally indicate stronger liquidity events. Strength tiers are classified as: Weak, Medium, Strong, and Elite Users can also define a minimum score to filter out lower-quality sweeps. 🔶 Score Presets Three scoring profiles are available: Conservative: Places greater emphasis on clean rejection candles and body structure. Balanced: Provides an even weighting across all scoring components and is suitable for most trading styles. Aggressive: Places greater importance on volume and equal liquidity clusters, making it more responsive to institutional activity. 🔶 Trend & Higher Timeframe Filters The indicator includes optional trend confirmation filters to help improve signal quality. The Trend Filter uses the EMA 50 and EMA 200 to evaluate the current market direction and offers two modes: Continuation : Displays only sweeps that align with the prevailing trend. Reversal : Displays only sweeps that occur against the prevailing trend, helping identify potential market reversals. For additional confirmation, the Higher Timeframe (HTF) Bias Filter compares price with a higher timeframe EMA. When enabled, sweeps are generated only if they align with the broader market trend, helping reduce false signals and improving overall trade selection. 🔶 Liquidity & Sweep Zones The indicator provides two complementary ways to visualize liquidity on the chart. Liquidity Zones highlight swing highs and lows as either horizontal lines, price zones, or both, making it easier to identify areas where liquidity is likely to accumulate. Users can choose between Lines Only, Zones Only, or Both to match their preferred chart style. When a liquidity sweep occurs, the indicator automatically creates a Sweep Zone around the rejection candle. These zones can be extended into the future, automatically removed after a user-defined period, or kept indefinitely. Sweep zones often serve as potential support or resistance areas, making them useful for identifying future reaction zones, retests, and trade opportunities. ⭐️ Bullish Liquidity Sweep Price sweeps below the Sell-Side Liquidity (SSL), triggering stop-loss orders before quickly reversing and closing back above the liquidity level. The Sweep Zone acts as a potential support area, while the strength score helps evaluate the quality of the setup. Traders may look for long opportunities on the confirmation or retest, targeting the next Buy-Side Liquidity (BSL). Example: ⭐️Bearish Liquidity Sweep Price sweeps above Buy-Side Liquidity (BSL), triggering breakout orders and stop-losses before reversing and closing back below the liquidity level. The Sweep Zone acts as a potential resistance area, while the strength score helps evaluate the quality of the setup. Traders may look for short opportunities on the rejection or retest, targeting the next Sell-Side Liquidity (SSL example chart: Alerts Built-in alert conditions include: • Bullish Liquidity Sweep • Bearish Liquidity Sweep • Equal High Sweep • Equal Low Sweep • Strong Bullish Sweep • Strong Bearish Sweep • Next-Candle Confirmed Sweep • Any Liquidity Sweep These alerts allow traders to automate notifications without monitoring charts continuously. How to Use The Advanced Liquidity Sweep indicator helps identify where liquidity exists, when it has been swept, and how strong the resulting market reaction is. For the best results, combine it with market structure, support and resistance, and proper risk management. Bullish Setup: - Wait for price to sweep a Sell-Side Liquidity (SSL) level. - The candle should close back above the liquidity level, confirming a bullish sweep. - Prefer Medium, Strong, or Elite sweep scores for higher-quality setups. - Use the Trend Filter or Higher Timeframe Bias Filter for additional confirmation. - Watch for a retest of the Sweep Zone before considering a long entry. -Place the stop-loss below the sweep low and target nearby resistance or Buy-Side Liquidity. Bearish Setup: - Wait for price to sweep a Buy-Side Liquidity (BSL) level. - The candle should close back below the liquidity level, confirming a bearish sweep. - Focus on higher-strength sweep scores for better probability. - Confirm the setup using the Trend or Higher Timeframe filters. - Look for rejection from the Sweep Zone before entering a short position. - Place the stop-loss above the sweep high and target nearby support or Sell-Side Liquidity. Advanced Liquidity Sweep is designed to help traders understand where liquidity exists, identify when it has been taken, and evaluate the quality of each sweep using multiple confirmation factors. Rather than relying on simple wick breaks, it combines liquidity analysis, market structure, trend confirmation, and strength scoring to provide greater context for trading decisions. As with any technical tool, it should be used alongside sound risk management and additional market analysis for the best results. We would love to hear your suggestions. If you have ideas for new features, indicators, analytics, or improvements, please share your feedback. Your input helps guide future updates and improve the indicator for all traders. This indicator is for educational and analytical purposes only. It should not be considered financial advice. Always use proper risk management and make trading decisions based on your own analysis

Indicator

Adaptive Smart Money Liquidity Sweep Levels [AlgoAlpha]🟠 OVERVIEW Adaptive Smart Money Liquidity Levels tracks liquidity resting above and below price by detecting swing highs and lows across multiple lookback periods. Instead of displaying every historical level equally, it stores active liquidity zones, updates them over time, and removes them once price mitigates them. The indicator also estimates the amount of liquidity accumulated around nearby levels using traded volume. This information is displayed through level opacity, a near-range liquidity balance chart, and an orderbook-style liquidity depth profile to provide context around where liquidity is concentrated. 🟠 CONCEPTS Liquidity Level — Swing highs and swing lows detected from fast, medium, and slow lookback windows. Nearby levels are merged together to reduce duplicate levels. These levels are used to estimate the location of stop-loss orders, and volume + candle direction are used to estimate the buying/selling (and thus concentration of stop-loss orders) to determine the magnitude of orders at these levels. Liquidity Depth — Volume is assigned to the nearest active liquidity levels based on candle direction and configurable distance weighting. The accumulated volume forms a depth profile around current price. Mass Liquidation — Triggered when a candle body moves through two or more active liquidity levels on the same side, indicating multiple liquidity pools were cleared within a single move. Stop-runs and Liquidity Dynamics — This script takes advantage of the concept of resting limit orders, and resting stop-loss orders. When a bar wicks a liquidity level instead of strongly trading through it, it implies a stronger amount of opposing pressure from both limit and market-orders than the pressure coming from clustered stop-losses, preventing a stop run and signalling a higher chance of that level holding and potentially a rebound. In simple terms, this indicator can be used as part of ICT and Smart Monet Concepts to help better understand a real liquidity sweep (marked by ▲▼) vs liquidation events (marked by highlighted candles) as both events usually require vastly different actions to capitalize on correctly. 🟠 FEATURES Adaptive Liquidity Levels . Displays the nearest active liquidity above and below price. • Level opacity increases as more volume accumulates. • Levels automatically disappear after mitigation or when they exceed the selected maximum age. • Levels represent accumulating stop loss orders as more trades occur (using volume and candle direction to estimate market orders) Near Range Liquidity Balance . Shows the relative liquidity accumulated of the 3 nearest levels above and below current price using a two-column comparison chart. Liquidity Depth Curve . Draws an orderbook-style cumulative depth profile beside price to visualize how liquidity builds further away from the current market. Liquidation And Sweep Signals . Highlights candles that clear multiple liquidity levels and marks wick-only liquidity sweeps with directional markers. 🟠 HOW TO USE Monitor liquidation labels and wick sweep markers to distinguish between full liquidity removals and liquidity that was only briefly tested. Liquidity removals imply weak levels while those that were wicked imply strong concentration of limit orders, useful for planning where to place stop losses or to time trade entries. Watch the nearest liquidity levels to identify where resting liquidity is currently concentrated around price. Compare the Near Range Liquidity Balance to see whether more liquidity is currently stacked above or below the market. Use the Liquidity Depth Curve to estimate how liquidity changes as price moves further away from its current location. 🟠 CONCLUSION Adaptive Smart Money Liquidity Levels combines multi-scale liquidity detection, volume-weighted liquidity accumulation, and mitigation tracking into a single view. By displaying active liquidity, nearby liquidity balance, and cumulative liquidity depth together, it provides additional context for where price is interacting with resting stop orders and how that structure changes over time. A key detail to note is that this script estimates the position and concentration of orders with proxies like swing levels and volume, and that the levels represent stop-loss orders, not limit orders.

Indicator

Price Action Bands | Trend & Volatility [RadixAlgo]🔶 About the Indicator Price action often looks simple after the move is complete, but while the market is moving, traders usually need more context to understand whether price is trending, overextended, pulling back, or simply moving inside normal volatility. This price action indicator was built to make this context easier to read directly on the chart. It combines a dynamic moving average baseline with upper and lower volatility bands, giving traders a structured way to follow trend direction, measure price extension, analyze volatility, and observe how price reacts around key dynamic support and resistance zones. At the center of the indicator is a customizable trend baseline that can be calculated with different moving average types, including SMA, EMA, HMA, RMA, WMA, SWMA, and VWMA. The baseline changes color based on the current trend state, helping users distinguish bullish and bearish market conditions without adding unnecessary visual noise. Around this baseline, the indicator plots adaptive volatility bands using either ATR or Standard Deviation. The upper red bands highlight areas where price may be extended to the upside, while the lower green bands show where price may be stretched to the downside. This isn’t one of those indicators that tries to tell you exactly when to buy or sell. It’s more like a lens that helps you see what the market is actually doing in real time. Sometimes you’ll notice price hugging the bands during a strong trend, other times it drifts back toward the baseline after stretching too far. That’s where the real insight comes from. You can tweak the moving average type, adjust how wide the bands are, or smooth things out depending on how fast or slow you like to read the chart. Whether you’re watching quick intraday moves or letting a swing trade develop over days, it naturally adapts to your style without forcing a rigid system on you. 🔶 How It Works The logic behind Price Action Bands | Trend & Volatility starts with a dynamic trend baseline. This baseline is the central reference point of the indicator and acts as the main structure around which price action is interpreted. Instead of forcing every market into one fixed moving average model, the indicator allows traders to choose between several moving average types, including SMA, EMA, HMA, RMA, WMA, SWMA, and VWMA. Each one reads the market slightly differently. SMA provides a classic and balanced view of the average price, EMA reacts faster to recent price changes, HMA is smoother while still being responsive, RMA is useful for softer trend tracking, WMA gives more importance to recent candles, SWMA creates a smoother short-term baseline, and VWMA includes volume in the calculation, making it useful when traders want the trend line to reflect both price and trading activity. After the baseline is calculated, the indicator compares it with a smoothed version of itself. This creates the trend state logic. When the baseline is positioned above its smoothed signal line, the market is treated as being in a bullish trend state, and the trend area is highlighted in blue. When the baseline moves below the smoothed signal line, the market is treated as being in a bearish trend state, and the trend area is highlighted in orange. This does not mean that the indicator is generating automatic buy or sell signals. Instead, it gives traders a cleaner way to understand whether the current price action is aligned with bullish pressure or bearish pressure. The second major part of the indicator is the volatility band system. Around the trend baseline, the script builds upper and lower bands that expand and contract based on market conditions. These bands can be calculated using either ATR or Standard Deviation. ATR measures the actual range of price movement and is useful for understanding how much the market is moving from candle to candle. It is especially helpful in volatile markets, breakout phases, and fast price movements. Standard Deviation, on the other hand, measures how far the baseline or price behavior is spread from its average condition. This makes it useful for identifying statistical price extension, compression, and overextended market areas. The indicator uses two band levels on each side of the baseline: inner bands and outer bands. The inner bands represent a moderate volatility zone, while the outer bands represent a more extreme price extension area. When price moves into the upper red bands, it shows that price is stretched above the trend baseline. This can happen during strong bullish continuation, aggressive breakout movement, or an overextended upside condition. When price reaches the lower green bands, it shows that price is stretched below the trend baseline. This can appear during strong bearish continuation, downside volatility expansion, or an overextended sell-side move. The upper and lower bands should not be read as simple overbought and oversold levels. This is where the indicator becomes more than just a basic band framework. Price can touch an upper band and continue higher if the trend is strong, or it can leave the upper band and return toward the baseline when momentum starts to fade. The same logic applies to the lower bands. A move into the lower band can signal strong bearish pressure, but if price exits the band and begins moving back toward the baseline, traders may start watching for a possible reaction, correction, or mean-reversion move. The value comes from reading the relationship between price, the baseline, the trend state, and the volatility zones together. In bullish conditions, traders usually focus on how price behaves around the blue trend baseline, the upper volatility bands, and pullbacks toward the central structure. A bullish market may show price holding above the baseline, reacting from it, or expanding toward the upper bands as volatility increases. In this environment, pullbacks toward the baseline can help traders evaluate whether the trend is still supported, while movement into the upper bands can show momentum expansion or price extension. In bearish conditions, the logic is reversed. Traders watch how price behaves below the baseline, how it reacts around the orange trend state, and whether downside movement reaches the lower green bands. Pullbacks toward the baseline may act as areas where bearish pressure returns, while movement into the lower bands can show strong downside volatility or stretched price action. Because the indicator does not place automatic signals on the chart, the trader remains responsible for interpreting the setup. A breakout, pullback, exit from band, or trend continuation condition is not defined by one single line touch. It is read through context: the color of the trend baseline, the position of price relative to the baseline, the distance between price and the bands, and the way candles react after entering or leaving a volatility zone. This makes the tool flexible for different strategies, including trend-following, breakout trading, pullback trading, volatility analysis, and mean-reversion analysis, while still keeping the chart visually clean. 🔶 Input Parameters 🔹Moving Average Type Selects the moving average used as the main trend baseline. The available options are SMA, EMA, HMA, RMA, WMA, SWMA, and VWMA. Each moving average type reacts differently to price movement, so traders can choose the one that best matches their trading style. 🔹Moving Average Period Defines the length of the moving average baseline. Higher values create a smoother and slower trend line, while lower values make the baseline react faster to recent price changes. 🔹Trend Smoothing Period Controls the smoothing of the trend signal line. Lower values make the trend state more sensitive to changes, while higher values create a smoother and more stable trend reading. 🔹Band Method Determines how the volatility bands are calculated. Traders can choose between ATR and Standard Deviation. ATR measures market range and movement, while Standard Deviation measures price dispersion around the baseline. 🔹ATR Period Sets the lookback period for the ATR calculation. This option is active when the Band Method is set to ATR. A shorter period reacts faster to volatility changes, while a longer period creates a smoother volatility reading. 🔹Standard Deviation Period Sets the lookback period for the Standard Deviation calculation. This option is active when the Band Method is set to Standard Deviation. It controls how price dispersion is measured for the volatility bands. 🔹Band Smoothing Period Smooths the upper and lower bands to reduce short-term fluctuations. Higher values make the bands more stable, while lower values make them more responsive to recent market movement. 🔹Inner Band Multiplier Controls the distance of the inner bands from the trend baseline. The inner bands represent the closer volatility zone and can help traders observe moderate price extension. 🔹Outer Band Multiplier Controls the distance of the outer bands from the trend baseline. The outer bands represent a wider volatility zone and can help traders identify stronger price extension or more extreme market movement. 🔶 Summary Price Action Bands | Trend & Volatility brings trend direction, price action analysis, and volatility bands into one clean chart-based framework. By combining a customizable moving average baseline with adaptive upper and lower bands, the indicator helps traders understand whether price is following the current trend, pulling back toward dynamic support and resistance, expanding with volatility, or moving into an overextended area. The colored trend baseline gives a quick view of bullish or bearish market conditions, while the ATR and Standard Deviation band methods allow the volatility zones to adapt to different market structures, trading styles, and timeframes. This indicator is not designed to replace trader judgment with automatic buy and sell signals. Instead, it gives users a practical way to interpret trend-following setups, breakout conditions, pullback opportunities, exit-from-band behavior, mean-reversion zones, and volatility expansion directly on the chart. With flexible settings for moving average type, moving average period, trend smoothing, band method, band smoothing, and inner or outer band multipliers, Price Action Bands can be adjusted for scalping, intraday trading, swing trading, and broader market analysis while keeping the chart readable and focused on real price action.

Indicator

[ A L P H A X ] PIVOT - Smart Money Structure AlphaX PIVOT — Smart Money Structure + OTE Pullback Engine: Market Structure Tracking, Optimal Trade Entry Zones, Liquidity Sweep Detection & 7-Layer Confluence Scoring AlphaX PIVOT is a professional-grade smart money pullback system built around two of the most powerful concepts in institutional price action: market structure and the Optimal Trade Entry zone. Where breakout-based systems enter at the moment of structural displacement — chasing the move after it has already begun — PIVOT waits for the market to pull back into the precise Fibonacci retracement zone where institutional continuation orders are resting, and fires only when a qualified rejection candle confirms within that zone with multi-layer confluence backing. The result is a system that gives you the same directional conviction as a breakout entry at a structurally superior price — buying the pullback into institutional demand after a bullish BOS or CHoCH, selling the pullback into institutional supply after a bearish structure shift — with a stop anchored to the structural swing low or high rather than an arbitrary ATR distance. Designed for precision-entry traders across crypto, forex, gold, and indices on any timeframe. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 The Core Philosophy — Why Pull Back to OTE? A Break of Structure or Change of Character tells you that the market has shifted direction at the institutional level. But the bar that breaks structure is rarely the optimal entry — it has already moved aggressively, the risk/reward from entry is reduced, and a pullback is statistically likely before the continuation begins. The Optimal Trade Entry concept solves this. After a structural displacement move, price almost always retraces into a specific Fibonacci retracement zone — the 61.8% to 78.6% retracement of the displacement leg — before the next move in the structural direction begins. This zone is where institutional orders waiting at discount prices (in a bull structure) or premium prices (in a bear structure) are filled. Entering in the OTE zone means entering where institutions are entering, with the displacement leg already confirmed as the directional signal and the structural swing as the natural stop reference. PIVOT detects every structural event, computes the OTE zone for the displacement leg in real time, and monitors for qualified rejection entries within that zone — all while running a 7-layer confluence engine that scores every potential entry before it fires. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🏗 Market Structure Engine — Tracking BOS & CHoCH The market structure engine runs a real-time fractal pivot detection system that tracks the most recent confirmed swing high and swing low on every bar, identifies every Break of Structure and Change of Character event, and maintains a live structural trend state. Pivot detection: Swing highs and lows are detected using a configurable pivot length (default: 5 bars each side). A pivot is confirmed when the specified number of bars on both the left and right side are lower (for a pivot high) or higher (for a pivot low). This creates confirmation — not just a local high or low, but a genuine fractal swing point. Break of Structure (BOS): When price closes above the most recent confirmed swing high while the structure is already bullish, a bullish BOS is detected — confirming the uptrend is intact and continuing. When price closes below the most recent swing low in a bearish structure, a bearish BOS is confirmed. BOS events are continuation signals — the existing structure is reinforcing itself. Change of Character (CHoCH): When price closes above a swing high while the structure is bearish, a bullish CHoCH is detected — the character of the market has changed from bearish to bullish. A bearish CHoCH is the inverse. CHoCH events are the highest-quality structural signals — they represent genuine institutional trend reversals and form the trigger for PIVOT's highest-conviction setup type. Structure break mode: The Close Only setting (default: on) requires a candle body close beyond the swing level for a BOS or CHoCH to register. When off, any wick touch counts. Body close is the stricter, cleaner mode — it eliminates false structure breaks caused by wick spikes that fail to close through the level, producing fewer but more reliable structural events. Live swing levels: The most recent confirmed swing high (plotted as a red dashed line) and swing low (yellow-green dashed line) are maintained on the chart in real time, extending forward until superseded by a new confirmed pivot. These levels represent the current active liquidity pools — the precise levels where the next sweep event is likely to occur. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📦 Structure Leg Box & Equilibrium — The Dealing Range Every confirmed structure break event spawns a Structure Leg Box — a semi-transparent purple rectangle anchored to the displacement leg that produced the structural event. This box is the visual equivalent of the ANCHOR trend segment box, providing immediate context for the current structural move's price range. Box construction: For a bullish structure break, the leg box spans from the previous swing low (the origin of the displacement) to the close that broke structure — capturing the full range of the institutional displacement move. For a bearish structure break, it spans from the previous swing high down to the structure break close. Equilibrium line: The midpoint of the structure leg box — the 50% retracement level — is plotted as a purple dotted line extending forward. This is the leg's equilibrium level and the dividing line between discount (below EQ, favorable for longs) and premium (above EQ, favorable for shorts). The Premium/Discount requirement enforces that PIVOT signals can only fire when price is in the institutionally correct zone relative to this level. Live updating: The box expands as the trend develops — if price makes new highs in a bull leg, the box top extends upward. The equilibrium adjusts continuously. This ensures the OTE calculations always reflect the full extent of the current structural leg, not just the initial displacement. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 The OTE Zone — Optimal Trade Entry Band The Optimal Trade Entry zone is a Fibonacci retracement band calculated from the structure leg's high and low — the 61.8% to 78.6% retracement zone (configurable). This is the institutional re-entry zone — the price area where sophisticated traders who missed the initial displacement fill their positions on the pullback. OTE calculation for bull structure: OTE Top = Leg High − (Leg Range × OTE Fib Low). Default: Leg High − (Range × 0.618) OTE Bottom = Leg High − (Leg Range × OTE Fib High). Default: Leg High − (Range × 0.786) This creates a band in the lower portion of the leg range — price must retrace between 61.8% and 78.6% of the upward displacement before the OTE zone is active. OTE calculation for bear structure: OTE Bottom = Leg Low + (Leg Range × OTE Fib Low) OTE Top = Leg Low + (Leg Range × OTE Fib High) This creates a band in the upper portion of the leg range — price must retrace between 61.8% and 78.6% of the downward displacement before the OTE zone is active. Why the 61.8–78.6% zone: The 61.8% (golden ratio) and 78.6% (square root of 0.618) retracement levels are the two most consistently respected Fibonacci levels in institutional price delivery. They represent the deepest pullback levels that remain structurally valid — a retracement beyond 78.6% technically invalidates the structure leg's momentum. Entries within this zone maximize reward (entering near the deepest discount in a bull leg) while minimizing risk (the stop is at the structural swing, not far from the OTE bottom). OTE zone visualization: A semi-transparent purple box rendered from the leg start bar to two bars beyond the current bar, spanning the OTE top and bottom prices. The zone extends and updates in real time as the leg evolves. The exact OTE band price levels are displayed on the dashboard for immediate reference. In-OTE detection: The current bar is considered in the OTE zone when the bar's low (for bull setups) reaches within the OTE band, or the bar's high (for bear setups) reaches within the OTE band. This detects the precise moment price has retraced into the optimal entry area. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 💧 Liquidity Sweep Detection The sweep detection engine identifies liquidity grab events relative to recent price extremes, adding an important second dimension to PIVOT's entry context. A sweep is detected when price briefly extends beyond the recent high or low reference level by a minimum ATR depth, then reverses and closes back inside — the classic stop-hunt signature. Bull sweep: The current bar's low extends below the lowest low of the lookback period (default: 20 bars) by at least the minimum sweep depth (default: 0.1× ATR), and the bar closes above that low and closes bullish (close above open). Sell-side liquidity has been grabbed. Bear sweep: The high extends above the highest high of the lookback period by at least the minimum depth, and the bar closes below that high and closes bearish. Buy-side liquidity has been grabbed. Sweep recency: PIVOT accepts sweeps from the current bar or either of the two preceding bars — a three-bar recency window. This accommodates the common scenario where the sweep candle precedes the OTE entry bar by one or two bars, allowing the confluence engine to credit the sweep even when entry occurs slightly after the grab. Setup B — Sweep + CHoCH: When a sweep occurs within 40 bars of a Change of Character event and price is simultaneously in the OTE zone with a rejection candle, PIVOT's second setup type fires — the Sweep + CHoCH entry. This is the highest-conviction entry type: a CHoCH confirms the structural reversal, the sweep confirms institutional liquidity accumulation, and the OTE entry delivers the optimal price. All three institutional signals converging simultaneously. Sweep markers (optional): Small orange circles can be plotted above or below bars where sweeps are detected. Off by default — sweeps count toward confluence scoring regardless of whether markers are displayed — but enabling them provides visual awareness of every liquidity event on the chart. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🕯 Rejection Candle Confirmation Every PIVOT entry requires a qualifying rejection candle within the OTE zone — the candle that demonstrates price has touched the OTE level and been rejected back in the structural direction. Bull rejection (Bullish Rejection or Engulfing): Bullish Rejection — the bar closes bullish (close above open) and the close-to-low distance represents more than 55% of the bar's total range. The lower wick consumes the majority of the bar's range — buyers overwhelmed sellers that pushed into the OTE zone Bullish Engulfing — a bullish close that fully engulfs the prior bearish candle — closing above the prior open while the prior candle was bearish. Confirms a clean reversal of the pullback momentum Bear rejection (Bearish Rejection or Engulfing): The mirror conditions — a bearish close with the high-to-close distance exceeding 55% of range, or a bearish engulfing of the prior bullish candle. Why candle confirmation is essential: The OTE zone being touched is a necessary but not sufficient condition for entry. Price can drift through the OTE zone on low momentum without producing a genuine reversal. The rejection candle requirement ensures that the OTE touch produced a visible institutional response — not just a passive drift through the zone. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 The 7-Layer Confluence Engine Every potential entry is evaluated across seven independent confluence layers. The default minimum is 5 of 7 — a high-quality gate that blocks setups where several dimensions of confirmation are missing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Layer 1 — Market Structure Direction Awards 1 point when the current structural trend agrees with the signal direction — bullish structure for longs (structure == 1), bearish for shorts. This is also a hard prerequisite enforced in the setup conditions — no PIVOT signal can fire without the structural trend being established in the signal direction. Structure is simultaneously a confluence layer and a foundational entry requirement. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Layer 2 — OTE Zone Touch Awards 1 point when the current bar is within the OTE retracement band for the active leg direction — the 61.8–78.6% retracement zone. Also a hard prerequisite in the setup conditions. Ensures the entry is at the institutionally optimal retracement depth, not at an arbitrary price within the leg range. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Layer 3 — Premium/Discount Zone Awards 1 point when price is in the correct zone relative to the leg equilibrium — below EQ (discount) for bull entries, above EQ (premium) for bear entries. The PD Zone layer enforces the institutional entry positioning principle: buy when price is cheap relative to the leg's fair value, sell when expensive. A valid OTE touch in the wrong PD zone (above EQ for a bull entry) carries a fundamental positioning problem — this layer blocks it. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Layer 4 — HTF Bias Awards 1 point when the higher timeframe EMA structure (default: 60-minute, 21/55 EMA) agrees with the signal direction, using the same strict condition as SURGE and ANCHOR — the HTF fast EMA must be above the slow EMA and the HTF close must be above the fast EMA for a bull vote. A bull OTE entry against a bearish HTF is a counter-trend trade; this layer ensures PIVOT's signals align with the macro institutional flow. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Layer 5 — Liquidity Sweep Awards 1 point when a qualifying sweep has occurred within the three-bar recency window in the correct direction. A sweep before or coinciding with the OTE entry dramatically increases the probability that the pullback is a genuine institutional accumulation event rather than a mechanical retracement. When the Sweep Filter is disabled, this layer is not available for scoring — the total achievable score drops to 6 of 6 in that configuration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Layer 6 — Rejection Candle Awards 1 point when a qualifying bull rejection or bullish engulfing candle (long) or bear rejection or bearish engulfing candle (short) is present on the current bar. This is the candle confirmation layer — confirming that the institutional response to the OTE touch is visible and decisive on the current bar. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Layer 7 — ADX + Volume Expansion Awards 1 point when both the ADX filter and the volume expansion filter pass simultaneously. ADX confirms the market has directional strength rather than ranging. Volume exceeding the moving average confirms genuine institutional participation on the entry candle rather than a low-activity drift through the OTE zone. Both conditions must be true for the single layer point — they are evaluated jointly. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🏷 Two Setup Types — A and B PIVOT fires signals through two distinct setup configurations, each representing a different institutional entry scenario. Both can be enabled simultaneously. Setup A — OTE Pullback: The foundational PIVOT setup. Fires when the market structure is established (BOS or CHoCH has confirmed), the displacement leg is active, price pulls back into the 61.8–78.6% OTE zone, a rejection candle forms within the zone, and the full confluence stack meets the minimum score. This is the highest-frequency setup type — it captures the standard institutional pullback sequence following any qualifying structure event. Setup B — Sweep + CHoCH: The premium PIVOT setup. Requires all Setup A conditions plus a Change of Character within the lookback window (40 bars) and a qualifying liquidity sweep within the three-bar recency window. The sequence is: liquidity sweep (stop hunt) → CHoCH (structural reversal confirmation) → OTE pullback (optimal entry). When all three institutional events converge simultaneously in the OTE zone with a rejection candle, this is among the highest-conviction setups available in the entire AlphaX indicator suite. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Structural Stop Loss Placement PIVOT uses structurally anchored stop placement — the stop is placed beyond the most recent confirmed swing low (for bull entries) or swing high (for bear entries), plus a small configurable ATR buffer (default: 0.25× ATR). Why this is the correct stop for OTE entries: The OTE entry is made on the premise that the structural swing low (bull) or high (bear) will hold — it is the key level whose violation would invalidate the entire structural thesis. If price closes through the swing low after a bull OTE entry, the structure leg is negated, the displacement was a false break, and the position thesis is fundamentally wrong. The structural swing is therefore not an arbitrary stop choice — it is the precise price at which the trade is provably wrong. This produces stops that adapt naturally to the leg size: large legs with distant swings produce wider stops and wider profit targets; tight legs with nearby swings produce tighter, higher-precision entries. The risk/reward is computed dynamically as `(close − slGuide) × TP Reward (R)`. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Live Dashboard The 16-row real-time dashboard displays the complete internal state across four sections. STRUCTURE Market Struct — current structural trend: ▲ BULLISH, ▼ BEARISH, or — NEUTRAL PD Zone — current position relative to leg equilibrium: ◧ DISCOUNT, ◧ PREMIUM, or — EQ Leg EQ — the exact leg equilibrium price (50% of the structure leg range) in real time OTE Band — the current OTE zone bottom and top prices. Updates live as the leg expands FILTERS HTF Bias — higher timeframe EMA alignment: ▲ BULL, ▼ BEAR, or — FLAT ADX — live ADX value with ✓ or ✗ pass/fail Session — ✓ ACTIVE or ✗ OFF LEVELS Swing Hi — the most recent confirmed fractal swing high price. This is the current sell-side liquidity level and bear structural reference Swing Lo — the most recent confirmed fractal swing low. The current buy-side liquidity level and bull structural stop reference CONFLUENCE Bull Score — live 0–7 confluence score. Background highlights yellow-green when threshold is met Bear Score — live 0–7 score. Background highlights red when threshold is met Live confluence label: During BUILDING and active leg phases, a small label near the OTE zone on the last bar shows B x/7 · S x/7 in real time — identical to ANCHOR's live score display — so you can monitor confluence building without dashboard attention. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📈 Chart Visual System Structure Leg Box (purple, semi-transparent) — the dealing range of the current displacement leg from structural origin to current price extreme. Adapts as the leg evolves OTE Band Box (purple, deeper tint) — the 61.8–78.6% retracement zone of the current leg, extending two bars beyond the current bar for forward visibility Leg Equilibrium Line (purple dots) — the 50% midpoint of the structure leg, continuously updated Swing High Line (red dashed) — the most recent confirmed fractal swing high Swing Low Line (yellow-green dashed) — the most recent confirmed fractal swing low ▲ Small Triangle (BOS Bull) — bullish Break of Structure, semi-transparent yellow-green ▲ Large Triangle (CHoCH Bull) — bullish Change of Character, bright yellow-green, larger size ▼ Small Triangle (BOS Bear) — bearish Break of Structure, semi-transparent red ▼ Large Triangle (CHoCH Bear) — bearish Change of Character, bright red, larger size ● Circle (optional, orange) — sweep detection markers when Show Sweep Markers is enabled ▲ Large Triangle (bull signal) — PIVOT long entry. All conditions confirmed ▼ Large Triangle (bear signal) — PIVOT short entry Live confluence label — B x/7 · S x/7 near the OTE zone on the current bar SL Guide (red dotted circles) — structural stop loss level below/above the swing reference TP Guide (yellow-green dotted circles) — dynamically computed reward target based on R multiple ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX PIVOT — Step by Step Step 1 — Identify the Structural Context Check the dashboard Market Struct row. ▲ BULLISH or ▼ BEARISH tells you the directional bias. — NEUTRAL means no structure is established — no setup can develop Note the Swing Hi and Swing Lo levels on the dashboard. These are the current liquidity pools and structural stop references Check HTF Bias — does the higher timeframe agree with the current structure? HTF alignment is worth 1 confluence point and significantly improves setup quality Step 2 — Watch for a Structure Event A large bright ▲ CHoCH triangle below the bar marks a bullish Change of Character — the highest-priority structural event. The structure leg box and OTE zone will draw immediately A smaller ▲ BOS triangle marks a bullish Break of Structure — confirmation the trend is continuing After either event, the Structure Leg Box and OTE Band are drawn in real time. Note where the OTE zone sits in absolute price terms from the dashboard's OTE Band row Step 3 — Wait for the OTE Pullback After the displacement, watch price retrace toward the OTE zone. The purple OTE box on the chart gives you the exact price boundaries Check PD Zone on the dashboard — for bull entries, you want ◧ DISCOUNT to confirm price is below the leg equilibrium when it enters the OTE Watch the live B x/7 score label near the OTE zone. As price approaches the zone, the score builds in real time Step 4 — Enter on the PIVOT Signal A ▲ triangle at the OTE zone confirms all conditions — structure direction, OTE touch, PD zone, HTF bias, sweep (if applicable), rejection candle, and ADX/volume The SL guide is plotted below the structural swing low (bull) — your structural invalidation level The TP guide is plotted at the computed reward target based on your configured R multiple For Setup B signals (Sweep + CHoCH), all three institutional events have converged — this is the highest-conviction PIVOT entry available Step 5 — Manage and Exit At the TP guide level, take partial or full profit If a new CHoCH fires in the opposite direction during the trade, the structure has reversed — this is the exit signal for any remaining position If price retests the OTE zone again during the same structural leg without triggering a new signal (cooldown active), wait for the cooldown to clear and assess whether the fresh confluence score still meets the minimum ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Identifying Low-Quality Conditions — When Not to Trade Stand aside when: Market Struct shows — NEUTRAL — no structural direction is established. Without a confirmed BOS or CHoCH, the leg box and OTE zone have no directional context. Wait for a structural event to occur before looking for OTE entries HTF Bias opposes structure direction — a bullish current timeframe structure against a bearish HTF is a counter-trend setup. These carry significantly lower success rates. The HTF alignment layer will not score, reducing the confluence count Price is in the wrong PD zone for the setup direction — a bull entry above the leg equilibrium (premium) or a bear entry below (discount) means entering when price is institutionally expensive relative to the leg's fair value. The PD zone filter blocks these when enabled Score is at 4/7 and the minimum is 5/7 — the setup is present but not enough layers confirm. Do not force entries when confluence is borderline Structure events (BOS/CHoCH) are flipping rapidly in both directions — alternating bull and bear structure events in quick succession indicate a choppy market with no clean trend. The OTE zones will be constantly resetting without producing completed pullback sequences OTE zone is very close to the swing low (bull) or swing high (bear) — when the OTE band and the structural stop reference are nearly at the same price, the risk/reward is poor. The stop would be just below the OTE entry. Reduce position size or pass the setup The ideal PIVOT setup: CHoCH event followed by a clean displacement leg with a well-defined leg box Price retraces into the OTE zone while in discount (bull) or premium (bear) A qualifying sweep has occurred within the last three bars HTF Bias aligned with structure direction Rejection candle forms within the OTE zone Confluence score at 6/7 or 7/7 ADX confirms trending and volume is expanding ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 📐 Real-time market structure engine — fractal pivot detection with configurable sensitivity, tracking BOS and CHoCH events with body-close confirmation mode 📦 Structure Leg Box — automatically drawn from the structural origin to the current price extreme, expanding in real time as the leg develops 🎯 Optimal Trade Entry zone — 61.8–78.6% Fibonacci retracement band computed from the structure leg, rendered as a live OTE box and displayed with exact price levels on the dashboard ⚖ Leg Equilibrium line — 50% midpoint of the structure leg acting as the dynamic PD zone divider, plotted continuously and updated as the leg grows 💧 Liquidity sweep detection — identifies stop-hunt events relative to the recent price range with configurable ATR depth and three-bar recency window 🏅 Two setup types — Setup A (OTE Pullback after any BOS/CHoCH) and Setup B (Sweep + CHoCH + OTE — the highest-conviction institutional entry pattern) 🕯 Dual candle confirmation — bullish/bearish rejection candles and engulfing candles both qualify, ensuring the OTE touch produced a genuine institutional reversal response 🧠 7-layer confluence engine — Market Structure, OTE Touch, PD Zone, HTF Bias, Liquidity Sweep, Rejection Candle, and ADX + Volume Expansion all scored independently 📊 Live confluence label near OTE zone — B x/7 · S x/7 displayed in real time on the current bar without requiring dashboard reference 🎯 Structural stop loss — placed beyond the confirmed swing low (bull) or swing high (bear) plus ATR buffer, anchored to the genuine structural invalidation level 💹 Dynamic TP target — computed as `risk × R multiple`, adapting to leg size rather than using a fixed ATR distance 📡 HTF EMA bias filter — strict dual-condition HTF alignment (EMA crossover + price above fast EMA) for maximum higher timeframe conviction 🕐 Session filter — restricts signals to configurable active trading hours 📊 16-row live dashboard — Structure, Filters, Levels, and Confluence sections updated in real time 🔔 6 alert conditions — long/short entry, bull/bear CHoCH, sweep low, sweep high 🎨 Fully cohesive dual-tone color system — yellow-green for all bullish elements, red for all bearish, purple for structural reference levels and OTE zone, orange for sweeps ⚙ Fully configurable — pivot length, structure break mode, OTE Fibonacci levels, sweep depth and lookback, setup types, confluence minimum, HTF timeframe and EMAs, ADX, volume filter, session, SL buffer, TP reward multiple, and all colors are independently adjustable ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Structure Engine Pivot Length (bars each side) — fractal sensitivity. 3 for scalping, 5 for standard intraday (default), 7+ for swing trading Structure Break: Close Only — when on, requires a candle body close beyond the swing level (default: on). Off = wick touch counts Show Active Swing Levels — toggle swing high and swing low dashed lines Show BOS / CHoCH Markers — toggle all structure event triangles CHoCH Only (hide BOS markers) — when on, only CHoCH events are marked. BOS events still update structure but are not labeled Structure Leg & OTE Show Structure Leg Box — toggle the displacement leg dealing range box Show Leg Equilibrium (50%) — toggle the leg midpoint line Show OTE Band (62–79%) — toggle the Fibonacci retracement entry zone box OTE Fib Low — lower Fibonacci level of the OTE band (default: 0.618) OTE Fib High — upper Fibonacci level of the OTE band (default: 0.786) Require Premium / Discount — when on, longs require discount positioning, shorts require premium (default: on) Liquidity Sweep Enable Sweep Filter — when on, Layer 5 scores the recent sweep and Setup B becomes available Show Sweep Markers — toggle optional orange circle markers at sweep detection bars Min Sweep Depth (xATR) — minimum wick extension beyond the reference extreme to qualify as a sweep (default: 0.1) Sweep Reference Lookback — bars used to define the recent high/low reference for sweep detection (default: 20) Entries & Confluence Setup A · OTE Pullback — enable standard OTE pullback entries after BOS or CHoCH Setup B · Sweep + CHoCH — enable the premium sweep + reversal + OTE setup type Min Confluence Layers (of 7) — minimum score required for a signal (default: 5) Show Entry Signals — toggle signal triangles Show Confluence Label — toggle the live B/S score label near the OTE zone Signal Cooldown (bars) — minimum bars between consecutive signals (default: 8) Filters HTF Trend Filter — toggle the higher timeframe EMA alignment requirement HTF Timeframe — the higher timeframe for EMA data (default: 60-minute) HTF Fast / Slow EMA — EMA periods on the HTF (defaults: 21 / 55) ADX Trend Filter — toggle the ADX strength requirement (default: off) ADX Length / ADX Minimum — ADX parameters (defaults: 14 / 18) Volume Expansion Confirm — when on, entry candle volume must exceed the moving average by the minimum multiplier Min Volume vs Avg — minimum volume ratio for the expansion filter (default: 1.1) Volume Avg Length — SMA length for the volume baseline (default: 20) Session Filter — toggle active hours restriction (default: off) Active Session — configurable session window Exit Guidance ATR Length — lookback for ATR calculation (default: 14) Show SL / TP Guides — toggle stop and target dotted circle plots SL Buffer Beyond Swing (xATR) — additional ATR buffer beyond the structural swing stop reference (default: 0.25) TP Reward (R) — take profit distance as a multiple of the risk from entry to stop (default: 2.0) Display Show Dashboard — toggle the full dashboard panel Dashboard Position — Top Left / Top Right / Bottom Left / Bottom Right Colors Bull / Bull Bright — yellow-green family for bullish signals, fills, and labels Bear / Bear Bright — red family for bearish signals, fills, and labels Sweep / Alert — orange for sweep markers and alerts Equilibrium / OTE Band — purple for structural reference levels and OTE zone SL Guide / TP Guide — stop and target circle colors Bull / Bear Label Text — text color for signal labels Dash Text / Dash BG / Dash Header / Dash Section / Dash Frame — full dashboard color control ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions (6 total) Entry Alerts Pivot Long Entry — all conditions confirmed for a long OTE setup. Signal label fired Pivot Short Entry — all conditions confirmed for a short OTE setup Structure Alerts Pivot Bull CHoCH — bullish Change of Character detected. Watch for OTE pullback in discount zone Pivot Bear CHoCH — bearish Change of Character detected. Watch for OTE pullback in premium zone Sweep Alerts Pivot Sweep Low — sell-side liquidity swept below recent lows. Potential long setup developing Pivot Sweep High — buy-side liquidity swept above recent highs. Potential short setup developing All alert messages are formatted as const strings for clean webhook and notification platform integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Recommended Settings by Instrument & Timeframe The default configuration is optimized for XAUUSD on M5–M15 , with general suitability for major forex pairs and crypto on the same timeframes: Pivot Length at 5 — the classic fractal sensitivity for intraday gold and forex. Balances signal frequency with structural significance Close Only on — body close structure breaks eliminate the vast majority of wick-based false breaks on gold and volatile instruments Setup B (Sweep + CHoCH) on — the highest-quality setups on gold involve a sweep before the CHoCH, making this setup type particularly effective on XAUUSD HTF at 60-minute — the standard intraday reference for M5–M15 trading ADX filter off by default — the OTE + rejection candle requirements already provide strong quality filtering without needing ADX as an additional gate For other instruments or timeframes, adjust: M1–M3 scalping — reduce Pivot Length to 3, increase Cooldown to 5, reduce TP Reward to 1.5, use tight session filter H1–H4 swing trading — increase Pivot Length to 7–10, set HTF to Daily or Weekly, increase TP Reward to 3.0–4.0, increase SL Buffer to 0.5 Crypto (BTC, ETH) — increase Sweep Depth to 0.2–0.3× ATR for the wider wicks typical of crypto, consider enabling ADX filter at 20 Indices (NAS100, US30) — use Pivot Length 5–7, enable Session Filter to 09:30–16:00, enable ADX filter More signals — lower Min Confluence to 4, disable PD Zone requirement, enable Setup A only, reduce Cooldown Ultra-selective entries only — raise Min Confluence to 6 or 7, require Setup B only, enable ADX filter, enable Volume Expansion ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🎯 OTE and Fibonacci pullback traders — PIVOT is the definitive quantitative implementation of the Optimal Trade Entry framework. Every component — structure detection, leg computation, Fibonacci zone rendering, and rejection confirmation — is automated and scored 🏦 Smart money concepts and ICT methodology traders — PIVOT encodes the CHoCH → displacement → OTE pullback sequence that forms the core of ICT's entry model. The Sweep + CHoCH setup type specifically captures the stop hunt → reversal → optimal entry sequence 🥇 Gold (XAUUSD) and forex traders — the default settings are calibrated for intraday gold trading, where OTE pullbacks after CHoCH events are among the most consistent institutional patterns available 📊 Traders who want structure-defined risk — the structural stop placement means every trade has a stop at a genuinely meaningful level — the swing that would invalidate the structure thesis — rather than an arbitrary ATR distance 🧠 Systematic traders who want to quantify OTE entries — the 7-layer scoring system removes subjectivity from OTE trading. Every potential entry is scored objectively against the same seven criteria on every bar 📈 Traders who want to enter later at a better price — PIVOT's entire philosophy is about waiting for the pullback. If you consistently enter at breakouts and then watch price retrace before continuing, PIVOT is the solution — it waits for that retracement and enters at the optimal Fibonacci level within it ⚠ Traders who struggle with stop placement — the structural swing reference + ATR buffer produces a stop that makes structural sense. You are not guessing where to put the stop — the market's structure tells you exactly where it belongs ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are confirmed on bar close — the indicator is non-repainting by design. Pivot detection, structure break logic, OTE zone calculation, and confluence scoring all finalize on confirmed bars only The pivot detection has an inherent offset of pivotLen bars — a pivot is only confirmed after pivotLen bars have passed on both sides. This is standard behavior for fractal-based pivot systems and is not repainting — it is the mathematical requirement for confirming the fractal pattern The Structure Leg Box and OTE Zone are redrawn only on the last bar for chart cleanliness. Historical bars retain signal markers and BOS/CHoCH labels but do not show outdated box overlays The CHoCH window for Setup B (40 bars) means a Sweep + CHoCH setup can fire up to 40 bars after the CHoCH event, as long as the OTE zone is still valid and all other conditions are met. On slower timeframes this window covers a wider clock-time range — adjust if needed The confluence label near the OTE zone is drawn only on the last bar. It is a real-time awareness tool, not a historical indicator Maximum 500 labels, 500 lines, and 80 boxes are rendered. On very active charts, the oldest markers may be removed by PulseWire's limits The session filter is off by default — PIVOT's structural approach is timeframe and session-agnostic. Enable the session filter for instruments where specific sessions (London, NY) produce more reliable structure events The TP guide is computed dynamically as risk × R multiple. On bars where the swing reference and current price are very close (producing near-zero risk), the fallback is ATR × R multiple ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who know that the move has already started — and who want to enter it at the precise price where the institutions who created the move are still adding to their position.

Indicator

by AlphaX-Trade

Liquidity & Structure Toolkit [erdensedat] The Liquidity & Structure Toolkit is a comprehensive, all-in-one indicator designed for Smart Money Concepts (SMC), Volume Profile analysis, and overall market structure tracking. It aims to provide traders with a clear visual representation of liquidity zones, structural breaks, session balances, and high-volume nodes without cluttering the chart. Below is a detailed breakdown of all the features, the math and logic behind the setups, the signal engine, and the alert systems included in this script. 1. Major Targets (Liquidity Pools - BSL/SSL) The script identifies major structural high and low points that act as liquidity magnets (Buy Side Liquidity - BSL and Sell Side Liquidity - SSL). Formula & Logic: It uses the ta.pivothigh() and ta.pivotlow() functions. A "Major Target" is confirmed only when the price forms a peak/valley with a user-defined Pivot Sensitivity (default is 10 bars on the left and right). Visualization: When a major pivot is formed, a horizontal line and a label ("MAJOR BSL" or "MAJOR SSL") are drawn. Sweep Mechanics: If the price crosses this level later, the level is considered "swept." The solid line turns into a dashed line with lower opacity, indicating that the liquidity has been taken. Swept levels are automatically removed after 24 hours to keep the chart clean. 2. Market Structure Breaks (BOS / CHoCH) This module tracks internal and external structural shifts based on fractal highs and lows. Logic: It calculates short-term pivots using a fractal length (default 5). When the price breaks above a recent pivot high, it's considered an upward break. When it breaks below a pivot low, it's a downward break. BOS vs. CHoCH: The script intelligently labels the breaks based on the previous trend state. If the trend continues (e.g., up break followed by another up break), it labels it as BOS (Break of Structure). If the direction shifts (e.g., down break followed by an up break), it labels it as CHoCH (Change of Character). Settings: You can choose whether a break requires a candle close beyond the level (Break = Close Beyond Level) or just a wick. 3. Initial Balance (IB) Box The Initial Balance represents the price range established during the first specified minutes of a new trading session. Setup: You define the Session Timeframe (e.g., Daily) and the IB Duration (e.g., the first 60 minutes). Logic: The script tracks the highest high (IBH) and lowest low (IBL) during that initial window. Once the time window closes, the box extends to the right, serving as a dynamic support/resistance zone for the rest of the session. Visualization: Highlights the IB High, IB Low, and IB Equilibrium (Midpoint) with clean labels and a customizable background box. 4. Volume Profile & POC Box (Point of Control) A custom Volume Profile engine that calculates the highest volume node (POC) dynamically using lower timeframe data. Lower Timeframe (LTF) Data: The script automatically fetches lower timeframe volume data (1m, 5m, 15m, or 60m depending on your chart's timeframe) to build an accurate profile inside a custom array matrix. Rows/Bins: The session range is divided into horizontal bins (default 60). Volume is distributed among these bins based on where the LTF candles traded. POC Engine Models: Model 1 (Active POC): Displays the active, evolving POC of the current session as well as historical POCs from previous sessions. Uses a Hysteresis percentage (default 15%) to prevent the POC line from flickering rapidly; the new volume node must exceed the old POC by X% to shift the level. Model 2 (Previous POC Focus): Instead of showing the actively changing current POC, it projects the finalized POC from the previous session starting from its original birth point, extending it across the current session as a heavy structural magnet. Delta Lines: Inside the POC box, it plots the highest volume node and its immediate neighboring nodes (top, mid, bot) to show the thickness of the volume cluster. 5. Price Action & MSB Signal Engine The script includes an automated signal engine that identifies highly probable reversal setups around the liquidity zones. Price Action (PA) Signals: Triggered when the price "touches" or sweeps a Major BSL or SSL level, and subsequently prints a valid directional candle (e.g., sweeping SSL and printing a solid green candle that is not a Doji). MSB (Market Structure Break) Signals: Triggered when the price sweeps a major liquidity level (BSL/SSL) and then creates a confirmed structural break (BOS/CHoCH) in the opposite direction. Visualization: Triangle shapes are plotted above/below the signal candles (Green for Buy, Red for Sell). 6. Moving Averages & VWAP For trend filtering and dynamic support/resistance, the toolkit includes optional traditional indicators: VWAP: Session-based Volume Weighted Average Price. Customizable MAs: Up to 5 moving averages can be toggled on/off. Supported types include SMA, EMA, WMA, HMA, and VWMA. Each can have its own length and color settings. 7. Alerts System The indicator features a built-in alert system for the signal engine. PA Signal Alert: Fires whenever a valid Price Action bounce occurs at a BSL/SSL level. MSB Signal Alert: Fires whenever a structural reversal is confirmed after a liquidity sweep. How to use: Create an alert in PulseWire, select this indicator, and choose "Any alert() function call". Disclaimer This indicator is for educational and analytical purposes only. It does not constitute financial advice or a recommendation to buy or sell any asset. Past performance is not indicative of future results. Trading cryptocurrencies, forex, and stocks carries a high level of risk. Always perform your own backtesting, use proper risk management, and consult with a certified financial advisor before making any trading decisions.

Indicator

Time and Price by erdensedat Time & Price Institutional Toolkit Overview The Time & Price Institutional Toolkit is an advanced framework designed to bridge the concepts of time cycles and price action liquidity. By blending multi-timeframe structural analysis, mathematical models (Fibonacci, Gann, Quarterly), and fair value gaps (FVG), it provides a complete top-down perspective on institutional order flow. The "Blue Skeleton" & Liquidity Sweeps At the core of the script is the dynamic "Blue Skeleton" matrix. It draws the calculation period's highest, lowest, and equilibrium points. Liquidity Sweep Filter: The skeleton essentially maps the "playing field" for the current session. Time Element: As time passes the 0.5 (midpoint) of the skeleton box—often aligning with the overlap of the London and New York sessions—the indicator is highly sensitive to manipulation sweeps. If the price spikes out of the skeleton boundaries after this midpoint, it frequently marks a "Turtle Soup" manipulation reversal right before a heavy volume trend kicks in. Key Features: 1. Time & Price Matrix (Skeleton Framework) Dynamically maps premium/discount zones and equilibrium based on your chosen higher timeframe (e.g., Daily, Weekly). Multiple mathematical schemas available: Mixed, Fibonacci, Quarterly, and Gann/Harmonic ratios. Clearly plots Overbought/Oversold extremes. 2. Turtle Soup (TS) Entry Model Identifies liquidity sweeps below previous period lows (Bullish Sweep) or above previous period highs (Bearish Sweep) that occur in the critical second half of the time window. Visualized with custom dashed lines and circular markers indicating high-probability reversal zones. 3. Fair Value Gap (FVG) & Breaker Engine Automatic detection of Fair Value Gaps and Breaker Blocks with overlapping gap filters. Raid Displays: Shows when an FVG has been raided (swept and closed through), creating dynamic support/resistance lines marked with an 'x'. Adjustable mitigation thresholds (Close, Wick, or Average). 4. Rejection Blocks Highlights extreme wicks (where the wick is greater than 50% of the candle range) that signify rejection. These act as institutional pivot points. Once mitigated, they visually transform into Mitigated Blocks (MB). 5. VWAP (Volume Weighted Average Price) Built-in, optional VWAP line for intraday mean-reversion and dynamic trend confirmation (Disabled by default, can be toggled in settings). 6. Candle Structure & Reversal Formations (Optional feature in settings) Highlights 2-bar immediate reversals, 3-bar standard reversals, and continuation structures specifically when they form inside the Premium/Discount extremes. Alert System The script includes a ready-to-use alert system focused on the highest probability setups: Turtle Soup Buy: Triggers when a bullish liquidity sweep is detected, dropping below the HTF low and rejecting back inside during the optimal time window. Turtle Soup Sell: Triggers when a bearish liquidity sweep is detected, pushing above the HTF high and rejecting. Note: To set these up, create an alert on PulseWire, select this indicator, and choose "Any alert() function call". How to Use: Let the skeleton form during the early parts of the session (Asia/London). Wait for the time to cross the 0.5 midline of the box. Look for the price to sweep the outer boundaries of the skeleton (Turtle Soup trigger). Enter on the rejection, targeting the 0 (Balance) line or the opposing Premium/Discount extreme, using FVGs and VWAP as dynamic targets.

Indicator

Support Resistance Reversal [erdensedat]Overview The Support Resistance Reversal is a highly advanced, institutional-grade Price Action and Liquidity Engine. Designed to filter out market noise, it focuses on tracking genuine liquidity sweeps, volatility compression, and momentum shifts. Instead of plotting a chaotic heatmap of every minor pivot, this system intelligently isolates only the most relevant unbroken structures to provide high-probability breakout and reversal signals. Core Mechanics The "Rule of 3" Target System: The indicator keeps the chart exceptionally clean by only displaying up to three active pairs of lines at any given time: The latest freshly formed Pivot structure. The closest historically unbroken Resistance (HH) above the current price. The closest historically unbroken Support (LL) below the current price. Double Layer Tracking: Each support/resistance is drawn as a double-layered zone (a solid line from the main pivot wick, and a dashed line from the subsequent confirmation candle). This allows the system to distinguish between minor liquidity sweeps (touching only the dashed line) and structural breaks (body closes beyond the solid line). Fade-Out Memory: When a level is definitively broken by a candle body, it doesn't just disappear. It fades into a transparent state, acting as a historical footprint of where liquidity was absorbed. Advanced Institutional Engines Dynamic EQ (Equilibrium) Wall: The system calculates the exact midpoint (EQ) between the active Resistance and Support. Every time the price tests the EQ and fails to close beyond it, the EQ line thickens, visually representing a growing psychological barrier and liquidity compression. POC Magnet (Point of Control): Within the active high/low range, the system dynamically tracks where the highest trading volume is occurring. This is plotted as a yellow dotted line, acting as the true gravitational center (magnet) of the current range, offering a prime Take Profit target. FVG Imbalance Tracker: Automatically detects unmitigated Fair Value Gaps (FVGs) in the background. If a sweep signal occurs exactly inside one of these institutional voids, the signal is upgraded to an setup, indicating strong institutional backing. MTF Liquidity Matrix: Projects Higher Timeframe (e.g., 4H) pivot structures directly onto your lower timeframe chart as thick dashed lines, ensuring you never trade blindly against macro liquidity pools. Pro Features (Experimental Triggers) These engines provide deep analytical insights into how a level is reacting, rather than just if it reacted: Level Aging (Cold Breakouts): Tracks how long a level has been untouched. If a level survives for over 50 bars (customizable) and is finally broken, it fires a blue/fuchsia Diamond signal, indicating a "Vacuum Breakout" where old limit orders have decayed. Volatility Spring (Compression): If the price remains trapped between the active top and bottom for a prolonged period, kinetic energy builds up. When the price finally breaks out, it prints a "SPRING" alert, catching violent volatility expansions. Ghost Lines (Asymmetric Voids): Spots areas where the price reversed just before hitting your main liquidity lines. Plotted as purple dotted lines, these highlight hidden, front-run liquidity pockets. High-Velocity Sweeps (Wick Velocity): Measures the wick-to-body ratio of rejection candles. If the price touches a line and violently rejects (leaving a massive wick and tiny body), it prints a yellow X-Cross, signaling aggressive institutional absorption. Triple Sweep Exhaustion: If a dashed line is tested and rejected 3 times within a rapid 10-bar window, and the 3rd rejection candle has a healthy body size in the reversal direction, it triggers an immediate BUY/SELL text signal, anticipating an exhausted side of the market. Dynamic Trendlines & Auto Risk/Reward Upon confirming a valid setup, the system generates a Momentum Vector (Trendline) originating from the signal wick: The line dynamically tracks the highs/lows of subsequent candles. It automatically calculates the Risk/Reward (RR) ratio based on the entry close price, the wick stop-loss, and the opposing EQ/POC target. Momentum Fading: If the trend loses momentum (slope flattens), the arrow and its label (showing "Strong" or "Weak" + RR) begin to fade out into transparency, keeping your chart clean from dead trades. Staggered labels prevent overlap during consecutive signals. Strict Validation Rules To prevent fake-outs, all standard triangle and text signals require strict candle body alignment: BUY signals will only fire if the signal candle closes Green (Close > Open). SELL signals will only fire if the signal candle closes Red (Close < Open). Comprehensive Alert System Fully modular alert conditions are built into the settings, allowing you to create custom server-side alerts for: Standard Breakouts/Retests Sweep & Reverses High-Velocity Sweeps Cold Level Breakouts Triple Sweep Exhaustions Simply set up a single "Confirmed Buy Alert" or "Confirmed Sell Alert" in PulseWire, and the engine will route the notifications based on your exact toggle preferences. Disclaimer: This script is provided for educational and informational purposes only. It is not financial or investment advice. Trading in financial markets involves a significant risk of loss. Always perform your own backtesting, risk management, and due diligence before executing any trades using live capital. Past performance is not indicative of future results.

Indicator

Key Levels + LS + ChoCh + Bias - [XAUUSDGODD]A minimalist SMC / liquidity toolkit that maps the key levels price reacts to, flags when liquidity is swept, tracks the resulting change of character, and gives you a higher-timeframe directional bias — all on one clean overlay. Built with gold (XAUUSD) in mind, but works on any symbol. **What it plots** - **Multi-timeframe key levels (1H / 4H / 1D):** highs and lows drawn as horizontal lines that follow price to the current bar and don't project into empty space. Each level is labelled with its timeframe and its liquidity side — BSL (buy-side, above highs) or SSL (sell-side, below lows). - **Session highs and lows (Asia / London / New York):** fully customizable session hours and timezone (default UTC+2). Choose between absolute session high/low or a swing-based definition. - **Liquidity Sweep (LS):** a level is marked as swept when price takes its liquidity — by wick, by a close-beyond-then-close-back sequence, or either (your choice). Swept levels fade out or are removed to keep the chart clean. - **Change of Character (ChoCh):** after a sweep, the structure level that needs to break is drawn dotted while pending and turns solid the moment a close actually breaks it. It auto-invalidates if price closes back beyond the sweep, or expires after a set number of bars. - **Daily bias panel:** a compact corner table showing 4H bias, 1H bias, and the combined daily bias, derived from market-structure breaks (BOS) on each timeframe. Flags ·mix when the two timeframes disagree. **How the levels are defined** A high is the higher wick of a bullish-then-bearish candle pair; a low is the lower wick of a bearish-then-bullish pair. Higher-timeframe levels are read from closed candles (non-repainting). When several levels stack at the same price, their labels are automatically merged into one multi-line label (tolerance adjustable via ATR) so text never overlaps. **Settings** - **Key levels:** toggle 1H / 4H / 1D, number of levels per timeframe, line style. - **Sessions:** enable Asia / London / NY, set hours and timezone, line style and transparency, high-low or swing mode. - **Setup:** show LS / ChoCh, sweep mode (Wick / Close / Both), double-close window, ChoCh window, invalidation on/off. - **Swept levels:** fade or delete, swept color. - **Colors & style:** BSL / SSL and setup colors, line width, label size, label offset, label merging and tolerance. - **Daily bias:** show panel, panel position, neutral color. **Suggested use** Use the key levels and session liquidity as your map of where price is likely to react. Wait for an LS into one of those pools, let the ChoCh confirm the shift, and trade in line with the daily bias for confluence. The setup logic runs on whatever timeframe the chart is set to. **Notes** Real-time LS / ChoCh signals evaluate on the live candle and settle on close — this is inherent to live trading, not a bug. The bias starts as Neutral until the first confirmed break of structure on each timeframe. This is an analysis tool, not financial advice; it draws no entries, stop losses or take profits.

Indicator

Order Blocks with Volume [Quantum Algo]Order Blocks with Volume OVERVIEW This indicator finds order blocks — the candles where a directional move originated before price broke market structure — and measures the buy and sell volume that traded inside each one. Every zone is drawn as a box that extends forward until price returns to it, and each active zone is labelled with its total volume and its buy/sell split, so you can tell at a glance which blocks were built on heavy participation and which were not. It is built entirely from price and volume on the chart you apply it to. There is no repainting of confirmed zones: detection runs only on closed bars. HOW DETECTION WORKS 1. Market structure. Confirmed swing highs and swing lows are located using a pivot of configurable length (Swing Length). A larger value isolates more significant structure and produces fewer, larger zones. 2. Break of structure. When a candle closes above the most recent confirmed swing high (bullish) or below the most recent confirmed swing low (bearish), the indicator treats it as a break of structure and looks for the order block that produced the move. 3. The order block candle. Starting from the breakout, the script steps back over the impulse candles and marks the last opposite-close candle before the move began — the last down-close candle for a bullish block, the last up-close candle for a bearish block. This is the origin of the displacement and the level price often revisits. 4. Zone range. The block is drawn from that candle using either its full high-to-low range (Wick) or its open-to-close body (Body). VOLUME ENGINE For each order block candle the indicator estimates how much of the traded volume was buying versus selling, using where the candle closed within its own range: - Buy volume is weighted by how close the candle closed to its high. - Sell volume is weighted by how close it closed to its low. This split is shown two ways: - Buy / Sell volume bars: two horizontal bars anchored at the left of the zone — buy on the top half, sell on the bottom half — with lengths proportional to each side. The Volume Bar Length setting controls how long they can extend (they are automatically kept inside the zone). - Volume label: written inside the zone on the right edge, showing the total volume of the block and the buy% / sell% balance. Volume strength is the block's volume divided by the average volume over a configurable baseline (Volume Baseline Length). It is used by the optional filter below to keep only the heaviest blocks. ZONE LIFECYCLE - Active. A live zone extends to the current bar and shows its volume bars and label. - Mitigation. When price first trades back into a zone, the 50% line marks the equilibrium and an alert can fire. - Invalidation. A zone is invalidated when price moves through its far edge. The source can be a wick touch or a candle close (Invalidation Source). - Breaker. If "Flip Broken Zones to Breaker Blocks" is on, an invalidated zone is kept and re-coloured as a breaker, since broken support can act as resistance and vice versa. - Historic. If "Keep Invalidated Zones (Historic)" is on, finished zones are frozen at the bar they died, re-coloured neutral, and their volume bars and text are removed to keep the chart clean. - If neither option is on, invalidated zones are removed. To avoid clutter the indicator will not stack a new zone on top of an existing active zone in the same area, limits the number of active zones per side, and automatically drops any zone older than the drawing range. ON-CHART ELEMENTS - Coloured boxes: bullish and bearish order blocks (and a neutral colour for breaker/historic). - Two inner bars per active zone: buy (top) and sell (bottom) volume. - A dotted line through the middle of active zones: the 50% mitigation / equilibrium level. - Text inside active zones: total volume and buy% / sell%. SETTINGS Structure & Detection - Swing Length — pivot length used to define structure. Higher = larger, more significant zones. - Impulse Lookback (bars) — how far back to search for the origin candle after a break of structure. - Zone Range — Wick (full range) or Body (open-to-close). - Max Active Zones / Side — cap on simultaneously active zones per direction. Invalidation - Invalidation Source — Wick (a high/low piercing the zone) or Close (a candle closing beyond it). - Flip Broken Zones to Breaker Blocks — keep and re-colour broken zones as breakers. - Keep Invalidated Zones (Historic) — freeze finished zones instead of deleting them. Volume Engine - Show Volume Label — write volume and buy/sell% inside active zones. - Show Buy / Sell Volume Bars — draw the proportional buy/sell bars. - Volume Baseline Length — averaging length used to rate volume strength. - Volume Bar Length (bars) — maximum length of the buy/sell bars. Filters - Only Show High-Volume Zones — hide blocks below the strength threshold. - Min Volume Strength (x avg) — threshold as a multiple of average volume. - Filter Oversized Zones — skip blocks taller than the ATR limit. - Max Zone Height (ATR x) — the height limit, in multiples of ATR. Style - Bullish Zone, Bearish Zone, Buy Volume, Sell Volume, Breaker / Historic, Text — colours. - Zone Extension (bars) — how far active zones project past the current bar. - Show 50% Mitigation Line — toggle the equilibrium line. ALERTS Alerts are raised through the alert() function for two events: an order block being tapped (mitigation) and an order block being broken (breaker formed). To use them, create an alert on the indicator and choose the "Any alert() function call" condition. HOW TO USE Order blocks mark areas where significant orders were likely placed. Traders commonly watch for price to return to an un-mitigated block and react there, and use the buy/sell volume split and strength to judge how meaningful a block is — a block built on high, one-sided volume is generally treated as more significant than a thin one. Combine the zones with your own confirmation and risk management; this tool highlights levels, it does not generate buy or sell signals. DISCLAIMER Nothing here is financial advice or a guarantee of any outcome. Past behaviour of price around order blocks does not predict future results. Always do your own research and manage risk.

Indicator

by Quantum-Algo

SICK MODE [erdensedat]Welcome to SICK MODE, the most comprehensive all-in-one Smart Money Concepts (SMC) and Liquidity tracking suite designed for serious traders. This indicator eliminates chart clutter by unifying the most powerful institutional trading concepts into one highly customizable and dynamic script. Whether you are a day trader, scalper, or swing trader, SICK MODE continuously scans the market to provide you with actionable setups, dynamic bias shifts, and high-probability points of interest (POIs). Here is a complete breakdown of everything SICK MODE offers and how it helps you build a solid trading setup: 🔥 Core Features & Setup Generators 1. Dual-Layer Market Structure (BOS & CHoCH) What it is: SICK MODE tracks both Internal (minor) and External (major) Market Structure simultaneously. How it helps: It automatically labels Break of Structure (BOS) and Change of Character (CHoCH). Internal structure (dashed lines) helps you find early entries, while external structure (solid thick lines) keeps you aligned with the higher timeframe macro trend. It also identifies Strong and Weak swing highs and lows, so you know which levels are likely to hold or be swept. 2. Advanced Liquidity Engine (BSL, SSL, IDM & Turtle Soup) What it is: Identifies Buy-Side Liquidity (BSL), Sell-Side Liquidity (SSL), and Inducement (IDM) levels. How it helps: Instead of cluttering your chart with endless lines, it keeps only the most relevant (default 3) liquidity levels. When a level is swept and price reverses, it signals a Turtle Soup (X / TS) entry, giving you a high-probability reversal setup. 3. Next-Gen Fair Value Gap (FVG) & Raid Engine What it is: A highly advanced FVG detection system that completely removes overlapping noise. How it helps: It plots precise bullish and bearish imbalances, with options to show mid-lines and extend mitigated gaps. The best part? The Display Raids feature automatically detects when an FVG is pierced (raided) to trigger a quick scalp reversal, printing a precise "x" marker. 4. Institutional Order Blocks & Rejection Blocks What it is: Detects highly specific Order Blocks (OB) and Rejection Blocks (RB/Wick Blocks). How it helps: When price mitigates an Order Block, it automatically shifts to a Breaker Block (BB) or Mitigated Block (MB), changing color to let you know the liquidity has been transferred. It actively looks for retests, giving you sniper entry zones. 5. SMT Divergence (Smart Money Tool) What it is: Automatically compares the current asset with a correlated ticker (e.g., comparing NQ with ES). How it helps: If the current asset makes a Higher High but the correlated asset makes a Lower High, SICK MODE draws an SMT Divergence line. This is a massive institutional footprint indicating underlying weakness or strength before a reversal. 6. Automated Support & Resistance Engine What it is: A dynamic S/R system that counts multiple touches on a specific price level. How it helps: The more price touches a level, the thicker the S/R line becomes. If the level is broken with conviction, the line is removed. Perfect for spotting retail liquidity buildups. 7. Sessions, Killzones & Daily Open What it is: Highlights Asia, London, and NY Killzones, plus the essential New York Midnight Open line. How it helps: It tracks unbroken Session Highs and Lows for up to a user-defined amount of days. The dashboard will automatically calculate the distance and show you the "Next Session Target", acting as a magnet for your Take Profits. 8. Advanced Live Dashboard What it is: A sleek, non-intrusive HUD panel. How it helps: Instantly gives you the ultimate top-down view: Current Bias & HTF Bias: (Bullish / Bearish / Neutral) Active Session: Tells you what session you are in or waiting for. Next Target: The closest unmitigated session high/low. Last Action: Prints the exact last institutional event (e.g., "Bullish Sweep/TS", "Bearish FVG Created"). Setup Info: Gives you a direct instruction (e.g., "Look for lows to take LONG"). 9. Comprehensive Alert System What it is: Never miss a setup with built-in dynamic alerts. How it helps: Set alerts for OB Creation, OB Retests, FVG Creation, FVG Raids, Rejection Blocks, and Turtle Soup (Sweep) triggers straight to your phone or PC. 💡 How to build a setup using SICK MODE? Check the Dashboard: Ensure your Current Bias and HTF Bias align. Wait for a Liquidity Purge: Look for a BSL/SSL Sweep or an FVG Raid signal (X). Confirm the Shift: Wait for a minor (Internal) CHoCH to form in your intended direction. Enter on Mitigation: Enter on the newly formed Order Block (OB), Rejection Block (RB), or FVG. Target: Use the "Next Session Target" from the Dashboard or unmitigated liquidity lines for Take Profit. ⚠️ DISCLAIMER: This Pine Script® indicator is provided for educational and informational purposes only. It does not constitute financial, investment, or trading advice. Trading in the financial markets (including forex, crypto, stocks, and commodities) involves a high level of risk and may not be suitable for all investors. Past performance is not indicative of future results. Always conduct your own research, use proper risk management, and consult with a certified financial advisor before making any real-money trading decisions. The author assumes no responsibility for any financial losses incurred while using this script.

Indicator

HTF Power of Three @SafarTrades HTF Power of Three HTF Power of Three is a higher timeframe visualization framework designed to project a developing Daily, Weekly, or Monthly candle directly onto a lower timeframe chart. The indicator is built around ICT's Power of Three (PO3) concept, allowing traders to monitor the current higher timeframe range and observe how price develops within that structure throughout the session. Rather than repeatedly switching between execution and higher timeframes, traders can maintain awareness of the active higher timeframe candle while remaining focused on lower timeframe execution. Many traders use the Daily, Weekly, or Monthly candle as a reference for directional bias, range analysis, and Power of Three development. However, viewing these structures traditionally requires frequent timeframe changes. HTF Power of Three solves this by projecting the active higher timeframe candle directly onto the chart, allowing traders to continuously monitor: • Current higher timeframe range • Relative position of current price within that range • Expansion of the active candle as new price data forms • Potential accumulation, manipulation, and distribution development • Higher timeframe context during lower timeframe execution Power of Three Framework The indicator is designed to help traders visualize how price is developing inside the active higher timeframe range. As the higher timeframe candle evolves, the projected structure updates in real time, allowing traders to monitor changes in range expansion, directional movement, and overall delivery without leaving the execution chart. By maintaining visibility of the active higher timeframe candle, traders can better understand where current price is trading relative to the projected range and how the developing structure aligns with their market narrative. Higher Timeframe Reference Levels The projected candle includes key higher timeframe reference points that help traders maintain context throughout the session. Optional display elements include: • Open • High • Low • Current Close • Range Information • Price-Based Range Measurements • Tick-Based Range Measurements These references allow traders to quickly evaluate the state of the developing higher timeframe candle without requiring separate charts. Customization The indicator includes extensive display controls allowing users to customize: • Daily, Weekly, or Monthly projections • Projection positioning and offset • Bullish and bearish candle appearance • Wick, border, and body styling • OHLC label visibility • Range table visibility • Table positioning • Range display format • Daily calculation method options Intended Use HTF Power of Three is designed for traders who combine lower timeframe execution with higher timeframe narrative and range analysis. By projecting the active Daily, Weekly, or Monthly candle directly onto the chart, the indicator provides continuous visibility of higher timeframe structure while reducing the need for constant timeframe switching.

Indicator

Machine Learning Smart Money Concepts | GainzAlgo What It Is This is a PulseWire indicator that fuses two ideas that don't usually share a chart: Smart Money Concepts (SMC): classic structure-based trading, specifically Change of Character (CHoCH) detection off swing highs/lows. K-Nearest Neighbors (KNN) : a simple, non-parametric machine learning method — used to score each new structure break against the most similar structure breaks that happened earlier on the same chart, and to project price targets from how those similar setups actually played out. In plain terms: every time price breaks structure, the indicator asks 'what did the last several breaks that looked like this one actually do?' and uses that historical evidence to assign a probability and a set of price targets, instead of relying on a fixed, one-size-fits-all rule. Structure first (the SMC layer) The indicator finds swing points using ta.pivothigh / ta.pivotlow with a configurable pivot length. It tracks a simple internal trend state (marketTrend: up / down / neutral) and flags a CHoCH: Bullish CHoCH: price closes above the last swing high while the prevailing state was not already bullish (i.e., a flip up). Bearish CHoCH: price closes below the last swing low while the prevailing state was not already bearish (i.e., a flip down). This is the standard SMC definition of "change of character", the first sign that the prior trend may be giving way to a new one. Turning the break into an actionable trade When a CHoCH fires, the script doesn't just say "structure broke", it measures how it broke, using three features computed over the bars since the prior swing point: Volume delta: An estimate of buy vs. sell pressure on each bar (derived from where the close sits within the bar's range, weighted by volume), averaged over the move. Positive = buyers dominant, negative = sellers dominant. Displacement: The size of the price move since the swing point, normalized by ATR. This tells you whether the break was a forceful, large-range move or a weak, barely-there one, independent of the instrument's raw volatility. Velocity: Displacement divided by the number of bars it took (i.e., how fast the move happened.) Finding lookalikes (the KNN engine) The script keeps a rolling database (capped at 2,000 records, with a "Historical Memory Window" limiting how far back it'll search) of every previous CHoCH's fingerprint, along with what actually happened afterward. For a new CHoCH, it: Filters the database to past events of the same direction (bullish vs. bearish) within the memory window. Computes Euclidean distance between the new fingerprint and every stored one. Pulls the K nearest neighbors (default 5) — the most similar past setups. Uses those neighbors to calculate: 1. A Significance Score = % of the K neighbors where price moved further in the favorable direction than the adverse direction (i.e., a "win rate" among lookalikes). 2. Three price targets, built from the distribution of how far those neighbor setups actually ran: TP1 (mean × conservative scalar) — a toned-down average outcome. TP2 (median) — the typical outcome. TP3 (75th percentile) — a stretch/aggressive outcome. These 3 targets are represented by a drawn box on the chart. How the database learns (the "training" loop) This is the part that makes it adaptive rather than a static rule set. On every bar, the script checks: did a CHoCH happen exactly lookahead bars ago (default 20)? If so, it now has enough hindsight to grade that old setup: It walks forward through those 20 bars and finds the maximum favorable excursion and maximum adverse excursion from the price at the time of that old CHoCH. It labels the outcome (favorable > adverse → success) and records the fingerprint as it existed at that time, plus the result, into the database. So the model is continuously and only ever trained on fully resolved history, never on the bar currently forming. It's an online-learning loop: today's signal is scored against yesterday's already-graded outcomes, and today's setup itself won't be graded and added to the database until lookahead bars from now. What's Drawn on the Chart CHoCH connector line: solid line from the broken swing point to the breakout close. Broken level marker: dashed line showing the swing high/low that got taken out, plus a short dotted line marking the actual break. Wick trace: a stylized multi-layer glow line tracing the wicks leading into the break (purely visual/aesthetic). CHoCH region fill: soft fill color between the wick trace and the broken level. Probability badge: small label (▲/▼ + %) printed near the break; gets a ★ if direction confidence is ≥85%. CHoCH tag: secondary tiny label showing "+CHoCH / −CHoCH" and the raw significance score. Target box — a shaded box from TP1 to TP3 with a dotted TP2 line through the middle, extended a fixed number of bars to the right. Dynamic Target Ribbon: a smoothed (SMA-based) pair of lines tracking the most recent bull/bear target, with a fill between them, giving a continuously-updating visual "zone." Side panel (table): live readout of bias (bullish/bearish/neutral), current significance score, last TP1/TP2/TP3 with counts of how many of each tier are still outstanding (unhit), database size, current volume delta, the active swing high/low, and the K / Window settings. Settings Guide 🧠 Quant Engine Look-Ahead Window (Bars): how many bars forward the model waits before grading a past CHoCH and adding it to the database. Larger = more patient/accurate labeling but slower to build a dataset. Historical Memory Window: how far back (in bars) the KNN search is allowed to look for neighbors. Smaller = more regime-adaptive (recent behavior only); larger = more data per query but less responsive to regime shifts. K-Nearest Neighbors (K): how many lookalikes to average over. Lower K = more reactive/noisy; higher K = smoother but slower to reflect new behavior. Min Significance Score (%): the threshold below which the indicator visually marks a signal as low-conviction (greyed badge) rather than colored. ATR Period: used both for the displacement feature and for badge placement offsets. Pivot Length: swing-point sensitivity; smaller = more (and earlier, but less confirmed) swings. 🎯 Target Levels Conservative Scalar: multiplier applied to the mean neighbor outcome to produce TP1. Target Extension (Bars): how far right the target box are drawn. How to Use It Wait for a CHoCH badge. Direction is shown by the arrow; the percentage is the KNN-derived probability that this break behaves like the favorable-outcome neighbors. Check the significance score against your threshold. Setups below your Min Significance Score print in a neutral grey, treat these as "structure broke, but the model has no strong opinion" rather than as a clean signal. Use the target box as a planning zone, not a guarantee. TP1 is the conservative/likely zone, TP2 the typical outcome among similar past moves, TP3 the stretch target, read it as a probability-weighted range, not a prediction. Watch "DB Records" in the side panel. Early on a chart, or on a symbol with limited history, the database will be small and the KNN matches less statistically meaningful. The model gets more reliable as it accumulates more graded history. Use the ★ marker as an extra filter. It only appears when directional confidence (not the raw significance score, but the bull/bear probability split) is ≥85%. Cross-reference with the bias/volume-delta in the panel for a quick read on whether the broader trend state and the most recent candle pressure agree with the new signal. Helpful Trade Tips Tip 1: Works extremely well on larger timeframes. Sweet spot is hourly and daily, which positions this indicator well for swing traders. Let's take a look at some examples: Example 1: SPY 30-Minute timeframe Here, with extended hours disabled, SPY snagged 8/9 of its target boxes. Example 2: QQQ Weekly Here, QQQ touched all recent targets. This highlights the strength of SMC to aid traders in having higher timeframe and longer range expectations based on the structural changes of the market. Let's highlight a few other examples: Example 3: BTCUSD on the Daily timeframe Here, BTC shows its loyalty to SMC, hitting the majority of its targets on the daily timeframe. Note: One thing to be aware of, to prevent the chart from looking overly cluttered, the box length has been sized to the immedate range to prevent a messy looking chart. However, you can manually adjust the size by using the "Manual Extension (Bars)" feature in the settings menu to increase the width of the target boxes. Here is an example: Alerts You can set custom alerts with this indicator to trigger buy and sell signals based on a probability threshold. You can set the probability thresholds for bearish and bullish conditions within the indicators setting menus. Then, toggle over to the alerts menu and set your Buy and Sell alerts. From there, you will be notified when there is a CHoCH that meets your specific probability threshold.

Indicator

ICT HTF Candles (Bryan)Added PSP, SMT, and HTF candle Sweep on top of ICT HTF Candles (fadi)

Indicator

by stocktradingpw22f

AlgoSentry Smart Money Engine [Non-Repaint]AlgoSentry Smart Money Engine A complete Smart Money Concepts toolkit built on a single rule: nothing is drawn until the candle closes. No repainting, no future leaks, no lookahead. What you see on historical bars is exactly what you would have seen live. This is one coherent engine, not a bundle of disconnected tools — each layer feeds the next: Market Structure -> Liquidity Sweep -> Fair Value Gap -> Break of Structure / Change of Character -> Order Block -> Premium / Discount -> Smart Money Score. ────────── What it reads ────────── Market Structure Swing highs and lows are detected with confirmed pivots. A swing only prints after a set number of closed bars on each side, so the structure labels (HH, HL, LH, LL) never move once drawn. Labels are off by default for a clean chart — the live bias is always in the dashboard. Break of Structure & Change of Character A break registers only when price closes beyond a confirmed swing level. Continuing the trend, it is a Break of Structure (BOS); reversing it after breaking the opposite level, it is a Change of Character (CHoCH). A line is drawn from the broken swing to the break candle. Displacement Quality Each break is graded Weak, Valid, or Institutional from candle body strength, ATR expansion, and — where available — volume expansion. It separates a real institutional move from a marginal one. Liquidity Sweeps Marked when price wicks beyond a prior swing but closes back inside it: a sell-side sweep below a swing low, a buy-side sweep above a swing high. Each swing is swept once, so the chart stays clean. Fair Value Gaps Three-candle imbalances are drawn as zones and tracked through their life — Fresh, Partially mitigated, Filled. Show active gaps only, or keep historical ones faded. Order Blocks After a confirmed break, the last opposite candle before that break becomes an order-block zone, tracked as Fresh, Touched, or Invalidated. Premium / Discount The last confirmed swing range is split into premium (upper), equilibrium (50%), and discount (lower) — context for where price sits inside its range. Smart Money Score A 0-100 context score from the confluence of structure, breaks, sweeps, imbalance, order-block proximity, and trend agreement, reading from Strong Bearish to Strong Bullish. It is a market-context score, not a buy or sell signal. ────────── Why it does not repaint ────────── Every layer runs on confirmed, closed bars. Pivots require bars on both sides before they confirm. Breaks, sweeps, gaps, and blocks are all evaluated on candle close. There is no security() call, no higher-timeframe lookahead, and no recalculation that moves a past signal. Backtest behaviour matches live behaviour. ────────── How to use it ────────── Read the dashboard top-down — bias, then the Smart Money Score for context, then the live phase (Accumulation, Expansion, Pullback, Distribution). Use BOS and CHoCH to read structural shifts, sweeps to spot liquidity grabs, and the Fair Value Gap and order-block zones as areas of interest. The optional EMA filter aligns events to the higher-timeframe trend. Alerts are available for every event, all candle-close confirmed. ────────── What it does NOT do ────────── It does not predict price. It does not give buy or sell signals. It does not place trades or guarantee any outcome. It is a structural and contextual reading tool — the decisions and the risk are yours. ────────── Disclaimer ────────── For educational and informational purposes only. This is not financial advice. Trading carries substantial risk of loss, and past behaviour does not guarantee future results. Every signal is confirmed on candle close. No future leaks. No lookahead.

Indicator

Falcon AI | FVG Finder Falcon AI — FVG Finder A free educational overlay that detects Fair Value Gaps (FVGs) — one of the core patterns in Smart Money Concepts (SMC) / ICT methodology. What's a Fair Value Gap? A 3-candle imbalance: an impulsive middle candle moves price so fast it leaves a gap between the first and third candles — a range that barely traded. Price often returns to "fill" these gaps before continuing. What it shows • Green box — Bullish FVG (gap below price) • Red box — Bearish FVG (gap above price) • "FVG" tag — a new gap just formed • Faded box — the gap has been filled / mitigated Settings • Min Gap Size (% of price) — filter out small gaps; raise for fewer, cleaner FVGs • Fill behavior — Fade, Remove, or Keep gaps once mitigated • Optional session filter — only mark gaps during your hours • Max FVGs to keep, colors, tags, info panel How to use it Add it to your chart (any market/timeframe; built with futures like MNQ in mind) Watch for price to return to an unfilled FVG — many traders study these as areas of interest Combine with your own structure read and bias — your entry, your stop, your risk management This indicator does NOT place trades, does NOT backtest, and has no entry, stop, or position-sizing logic. It's an educational overlay for studying the Fair Value Gap pattern. Disclaimer: Educational use only. Not financial advice. Past pattern formations do not guarantee future price behavior — these are pattern detections, not trade recommendations. Always use a stop loss and manage your own risk. Trading futures involves substantial risk of loss.

Indicator

Dealing Range Equilibrium & Premium/Discount Zones (SMC)This indicator is a streamlined visualization tool designed specifically for traders utilizing Smart Money Concepts (SMC) and ICT methodologies. It automatically detects the current structural Dealing Range and divides it into logical quadrants: Premium, Discount, and Equilibrium. Rather than manually drawing Fibonacci grids on every new structural swing, this script dynamically anchors to the most recent validated pivot points, keeping your charts clean and your focus on price action. Underlying Logic & Calculations The script relies on a standard pivot-detection algorithm to establish the boundaries of the dealing range: Swing Detection: It uses standard ta.pivothigh and ta.pivotlow functions to scan for structural highs and lows based on a user-defined "Swing Lookback Period" (default is 20 bars). A pivot high is confirmed when the central candle is higher than the n candles to its left and right. Range Anchoring: Once a new swing high or low is validated, the top or bottom variables update respectively. These horizontal levels persist forward in time until a new structural pivot breaks them. Equilibrium Calculation: The script calculates the mathematical median of the current range by adding the active Swing High and Swing Low, then dividing by two (top + bottom) / 2. Visuals & Practical Usage In SMC theory, markets move from consolidation to expansion, seeking liquidity. The dealing range helps traders contextualize where price is relative to recent structure: Premium Zone (Red Fill): The upper 50% of the dealing range. In a bearish structural environment, traders look for price to retrace into the Premium zone to identify high-probability short setups or institutional distribution. Discount Zone (Green Fill): The lower 50% of the dealing range. In a bullish environment, traders wait for price to retrace into the Discount zone to look for long setups or institutional accumulation. Equilibrium (Midline): The exact 50% level (fair value). Price action around this line often acts as a transition point or near-term support/resistance. Settings Swing Lookback Period: Controls the sensitivity of the pivot detection. A lower number (e.g., 5 or 10) will capture micro-structure and minor pullbacks, ideal for scalping. A higher number (e.g., 20 or 50) will anchor only to major macro-swings. Show Labels: Toggles the text labels on the current price axis to keep the chart clean if desired.

Indicator

Ict Mmxm Framework ict mmxm framework is a session-based market structure tool designed to organize intraday price delivery around fpi zones, macro windows, order blocks, imbalances, breakaway gap order blocks, opening ranges, and session range structure. The script is built to help traders study how price behaves during the asian, london, new york morning, lunch, and new york afternoon sessions. It separates each major session into its own visual components so the user can compare pre-session ranges, active session ranges, macro windows, fpi areas, imbalance areas, order block zones, breakaway gap order blocks, and opening range levels. Main components: * pre-asian range from 7:00 pm to 9:00 pm new york time * asian range from 9:00 pm to 12:00 am new york time * asian macro windows at 6:50 pm to 7:10 pm, 8:50 pm to 9:10 pm, and 12:50 am to 1:10 am * pre-london range from 2:00 am to 3:00 am new york time * london range from 3:00 am to 5:00 am new york time * london macro windows at 1:50 am to 2:10 am, 2:50 am to 3:10 am, and 4:50 am to 5:10 am * new york morning, lunch, and afternoon session structure * fpi visualization for asian, london, and new york sessions * separate fpi detection for asian and london macro windows * selected-bias imbalance mapping * selected-bias order block mapping * breakaway gap order block mapping * high, midpoint, and low price labels for imbalance, order block, and breakaway gap order block zones * opening range levels for the new york morning and afternoon sessions * configurable session visibility and visual settings The asian and london sections include range boxes, high and low references, midpoint references, macro windows, fpi areas, selected-bias imbalance zones, selected-bias order block zones, and breakaway gap order block context. These components are intended to help traders compare how price develops from one session into the next. The selected expected bias controls how the main imbalance and order block zones are emphasized. When bearish bias is selected, the framework focuses on the highest relevant bullish order block and premium-side imbalance context. When bullish bias is selected, the framework focuses on the lowest relevant bearish order block and discount-side imbalance context. The order block, imbalance, and breakaway gap order block zones use soft transparent colors based on the selected expected bias. Bearish bias uses red-toned zones, while bullish bias uses green-toned zones. This is intended to keep the chart visually aligned with the selected directional framework. The purpose of this script is to provide a structured visual framework for studying session-based delivery, liquidity reference points, fpi behavior, macro timing, order blocks, imbalances, breakaway gap order blocks, and projected levels. It is intended for market context, discretionary planning, and research. This script does not generate guaranteed trade signals, does not predict future price movement, and does not provide financial advice. It should be used together with independent analysis and proper risk management. Asian Session: London Session: Ny Session:

Indicator

Mirage Liquidity Sweep Pro [WillyAlgoTrader]💧 Mirage Liquidity Sweep Pro is a free overlay toolkit that detects liquidity sweeps (stop-hunts), scores each one on a transparent 0-100 quality scale, optionally waits for a market-structure shift (CHoCH) to confirm, and then auto-builds a complete trade plan — wick-based stop, three take-profits, break-even logic, and a projected liquidity target — all on the bar the signal fires. The core insight: price doesn't reverse at random support and resistance — it reverses where resting orders (liquidity) get consumed. A swing high above the market holds Buy-Side Liquidity (BSL); a swing low below it holds Sell-Side Liquidity (SSL). When price spikes through one of those levels and then closes back inside, that is a sweep: the move grabbed liquidity and rejected. Mirage finds those exact events, measures how clean the rejection was, and turns the strong ones into structured setups. It works on any market and any timeframe. 🧩 WHY THESE COMPONENTS WORK TOGETHER A raw sweep detector fires on every wick that pokes a level — most of which go nowhere. A pure structure tool (CHoCH/BOS) tells you the trend flipped but not whether liquidity was actually taken first. A risk calculator gives you a stop and targets but has no idea where the trade should go. Used separately, each one leaves a gap the others could fill. Mirage fuses them into a single pipeline: Swing memory → Liquidity sweep detection → 5-factor quality score → CHoCH structure confirmation → Wick-anchored risk engine (SL / TP1-3 / break-even) → Liquidity target projection → Outcome tracking & stats The swing engine remembers recent highs and lows and tags them as resting liquidity. The sweep detector only triggers when a level is pierced and reclaimed on the close — a stop-hunt, not a clean break. The quality score then rates that sweep so weak pokes are filtered out before they ever become signals. CHoCH confirmation (optional) makes price prove the reversal by breaking minor structure before you commit. The risk engine anchors the stop to the actual sweep wick — the precise point invalidating the idea — and projects the next opposite pool of liquidity as the logical objective. Finally, every closed setup is tracked so you can see the strategy's behavior in real time. Without the score, you drown in low-quality sweeps. Without CHoCH, you front-run reversals that never come. Without wick-anchored risk, your stop sits in an arbitrary place. Without the liquidity target, you have no idea where the move is actually drawn. The combination is what turns "a wick touched a level" into a complete, rule-based trade. 🔍 WHAT MAKES IT ORIGINAL 1️⃣ 5-factor sweep quality score (0-100) — the heart of the system. Every detected sweep is scored before it can qualify. The score blends five independent, normalized factors: — 📐 Wick depth (weight 0.30): wickComp = min( max(wick, 0) / ATR , 1.0 ). For a bullish sweep, wick = min(open, close) − low; for bearish, wick = high − max(open, close). Bigger rejection wick relative to ATR = stronger grab. — 🔄 Reclaim (weight 0.25): rclComp = min( max(reclaim, 0) / ATR , 1.0 ). Bullish reclaim = close − level; bearish = level − close. Measures how decisively price closed back on the right side of the swept level. — 🕯️ Close position (weight 0.20): closePos = (close − low) / (high − low). For bulls the raw value is used; for bears it is inverted (1 − closePos). Rewards candles that close near the rejection extreme. — 📊 Volume (weight 0.15): volComp = clamp( (volRatio − 1) / (volMult − 1) , 0, 1 ), where volRatio = volume / SMA(volume, 21) and volMult defaults to 1.5×. On volume-less feeds this factor neutralizes to 0.5 automatically. — 🧭 HTF bias (weight 0.10): htfComp = 1.0 if the sweep aligns with the higher-timeframe EMA trend, else 0 (or 0.5 if the filter is off). Final score = (wickComp×0.30 + rclComp×0.25 + cpComp×0.20 + volComp×0.15 + htfComp×0.10) × 100. A sweep only qualifies when its score ≥ Min Sweep Score (default 50). This single number is your master quality dial. 2️⃣ Sweep vs. break distinction — closes decide everything. A stored level is treated three ways. For a swing low: if price closes below it, the level is simply consumed (a real breakdown — no signal). If price wicks below but closes back above, that is a bullish sweep. The mirror logic applies to swing highs. This close-based rule is what separates a genuine liquidity grab from a trend break, and it is why the detector ignores most noise wicks. 3️⃣ Two-stage signal — sweep then CHoCH confirmation. With confirmation on (default), a qualifying sweep becomes a pending setup rather than an instant entry. The signal only fires when price then breaks the most recent minor pivot (Change of Character) within the Confirmation Window (default 13 bars). Minor structure is tracked with its own pivot length (default 8). Turn confirmation off and the signal fires on the sweep bar itself — responsive, but earlier. Pending setups expire automatically if no CHoCH arrives in time. 4️⃣ Wick-anchored risk engine with a minimum-distance guard. Entry = close of the signal bar. The stop is placed beyond the actual sweep wick: — Long: SL = sweepLow − ATR×buffer — Short: SL = sweepHigh + ATR×buffer If the resulting stop sits closer than ATR×0.5 to entry, it is widened to exactly ATR×0.5 to avoid an unrealistically tight stop. Risk distance dist = |entry − SL|, and targets are pure R-multiples: TP1/TP2/TP3 = entry ± dist × multiplier. 5️⃣ Risk presets — one click from scalp to swing. Five presets set buffer / TP1 / TP2 / TP3 instantly (SL buffer in ×ATR, TPs in R): — Conservative: 0.50 / 1R / 2R / 4R — Balanced (default): 0.25 / 1R / 2R / 3R — Aggressive: 0.15 / 1.5R / 2.5R / 4R — Scalping: 0.10 / 0.8R / 1.5R / 2R — Custom: your own values 6️⃣ Break-even automation after TP1. When TP1 is touched, the stop moves to entry. From the next bar a wick back to entry closes the trade at break-even — protecting the position once it has paid out its first target. The SL line dims and the entry label annotates "→ SL (BE)" so the state is always visible. 7️⃣ Resting liquidity map — BSL / SSL + EQH / EQL. Every un-swept swing high is drawn as Buy-Side Liquidity and every un-swept swing low as Sell-Side Liquidity (most recent N per side, default 6). A level disappears the instant it is swept, so the map always shows live, untapped pools. Consecutive near-equal swings (within Equal H/L Tolerance × ATR, default 0.15) are connected as Equal Highs / Equal Lows — the strongest liquidity magnets and the most common sweep targets. 8️⃣ Liquidity target projection — the draw-on-liquidity objective. On each entry, Mirage projects a line to the nearest opposite un-swept liquidity pool: a long aims at the closest BSL above entry, a short at the closest SSL below. This is the logical place the move is "drawn" toward, independent of the fixed R-multiple TPs. 9️⃣ Higher-timeframe bias as a soft, non-repainting filter. The HTF trend (close vs. EMA, default 4H / EMA-50) is requested with confirmed prior-bar values and contributes only 10% of the score — it nudges quality rather than hard-blocking signals, so counter-trend sweeps can still fire if they are clean enough. 🔟 Honest, transparent outcome tracking. The dashboard records every closed setup: wins, losses, win rate (with a visual gauge), and a recent-form strip of the last 10 results. A setup is counted as a WIN the moment TP1 is touched, and a trade closes on a stop-out or when TP3 is reached. This definition is stated openly so you always know exactly what the numbers mean — see Important Notes for the full caveats. 🧠 HOW IT WORKS — CALCULATION FLOW Step 1 — Map the swings: Confirmed pivot highs/lows (length 21) are stored in bounded memory and tagged as un-swept BSL/SSL. Step 2 — Detect a sweep: On each new bar, un-swept levels within Max Sweep Distance (default 80 bars) are checked. A wick-through-then-close-back-inside event is flagged as a sweep; a close beyond the level just marks it consumed. Step 3 — Score it: The 5-factor formula rates the sweep 0-100. Only sweeps at or above Min Sweep Score, after warm-up, on a confirmed bar, qualify. Step 4 — Resolve the signal: If CHoCH confirmation is on, the sweep becomes a pending setup and waits for a minor-structure break within the window; otherwise it fires immediately. Step 5 — Build the trade: Entry, wick-based SL (with the ATR×0.5 minimum guard), and TP1/TP2/TP3 as R-multiples are calculated. Only one position runs at a time. Step 6 — Manage it: Bar by bar, hits are checked on confirmed bars. TP1 triggers break-even; a stop-out or TP3 closes and records the result. Step 7 — Visualize & report: Lines, labels, the liquidity map, the target projection, and the dashboard all update live. 📖 HOW TO USE (beginner-friendly) 🎯 Quick start — 5 steps: 1. Add the indicator to any chart and any timeframe (15m–4H is a good starting range). 2. Leave every setting on default. The Balanced preset and a Min Score of 50 are a sensible baseline. 3. Wait for a green Long ▲ or red Short ▼ marker. That is your entry signal — and it only appears once a sweep has passed the quality score (and, by default, a CHoCH confirmation). 4. Read the entry, stop, and three targets straight off the chart lines and labels. The numbers are already calculated for you. 5. Manage the trade using TP1/TP2/TP3 and the automatic break-even — see the dashboard for live status. 👁️ Reading the chart — what each thing means: — 🟢 Long ▲ / 🔴 Short ▼ = a confirmed signal (a trade opened here). — ✖️ Small × mark = a raw sweep (liquidity was grabbed) — shown even when no trade opens. — Dashed level line = the swing high/low that was swept, drawn from where it formed. — Thick vertical tick = the penetration depth — how far the wick pierced beyond the level. — ENTRY line = where the trade opened. SL line (red) = stop. TP1/TP2/TP3 lines = targets; a target turns solid teal with a ✓ once touched. — Gold dashed line "◎ Liquidity Target" = the nearest opposite liquidity pool the move is drawn toward. — Dotted BSL / SSL lines = un-swept resting liquidity above (BSL) and below (SSL) — likely future sweep targets. — EQH / EQL connectors = near-equal highs/lows = the strongest liquidity magnets. — % on labels = distance from entry to each level, e.g. "SL 1.2300 (−0.36%)". 📊 Dashboard fields: — Trend: direction of the most recent qualifying signal. — HTF Bias: higher-timeframe EMA bias (the soft 10% score factor). — Signal: LONG / SHORT when in a trade, "Wait" when flat (a new trade opens only while flat). — Last sweep: most recent qualifying sweep and its 0-100 score. — SL / TP1 / TP2 / TP3: live levels; ✓ marks a target already touched; "BE @" marks a stop moved to break-even. — R:R (TP1): reward-to-risk at the first target. — SL Dist %: stop distance as a percent of entry. — Trades / W-L / Win rate / Form: session results, with a gauge and a ▰/▱ strip of the last 10 outcomes (newest on the right). 🔧 Tuning guide (common fixes): — Too few signals? Lower Min Sweep Score (e.g. 40-45), shorten Swing Length, or turn off CHoCH confirmation for earlier entries. — Too many weak signals? Raise Min Sweep Score (60+), keep CHoCH on, and enable the Volume filter. — Stops feel too tight/wide? Switch presets (Conservative widens, Scalping tightens) or set the SL buffer manually in Custom. — Choppy market? Increase Swing Length and lean on the HTF bias filter so only trend-aligned sweeps score highly. 💡 Trading ideas: — EQH/EQL hunt: watch a marked Equal High/Low — when it is swept and reclaimed with a high score, the rejection is often clean. — Draw-on-liquidity: use the gold target line as a partial-exit zone; price frequently reaches the next opposite pool. — Confirmation toggle: use CHoCH-on for selective swing entries, CHoCH-off on lower timeframes for faster scalps. — Bias stacking: take only signals whose direction matches the HTF Bias field for higher-conviction entries. ⚙️ KEY SETTINGS ⚙️ Main: — Swing Length (default 21): pivot lookback for the liquidity pools to sweep. Higher = bigger, cleaner pools. — Max Sweep Distance (default 80 bars): a swing can only be swept within this many bars of forming. — Min Sweep Score (default 50): master quality gate, 0-100. 🧩 Confirmation: — Require CHoCH Confirmation (default on): wait for a structure break after the sweep. — Structure Pivot Length (default 8): minor pivots used to detect the CHoCH. — Confirmation Window (default 13 bars): how long a pending setup waits before expiring. 🔍 Filters: — Use Volume Filter (default on) / Volume MA Length (21) / Volume Spike ×MA (1.5). — Use HTF Bias (default on) / HTF Timeframe (240) / HTF EMA Length (50). 🛡️ Risk Management: — Risk Preset (default Balanced): Conservative / Balanced / Aggressive / Scalping / Custom. — ATR Length (14) / SL Buffer ×ATR (0.25, Custom) / TP1/TP2/TP3 ×Risk (1.0 / 2.0 / 3.0, Custom). — Break-Even After TP1 (default on), plus SL/TP line and label visibility, % distance, and line styles. 💧 Liquidity: — Show Resting Liquidity (BSL/SSL) (on) / Max Levels / Side (6) / Line Extend (10 bars). — Show Equal Highs/Lows (on) / Equal H/L Tolerance ×ATR (0.15) / Show Liquidity Target (on). 🎨 Visual & Dashboard: — Theme (Auto / Dark / Light), raw sweep marks, swept-level line, penetration, signals, score labels, watermark, label font size. — Dashboard position, font size, and Market / Trade / Stats section toggles. 🔔 ALERTS — 🟢 LONG entry — ticker, timeframe, score, price, SL, TP1, TP2, TP3, R:R. — 🔴 SHORT entry — same payload. — 🛑 SL Hit (and 🛡️ Break-Even stop-out) — entry and stop levels. — 🛡️ Break-Even activated — when the stop moves to entry. — 🎯 TP1 / TP2 / TP3 touched — price at each target. All alerts support plain-text and JSON webhook formats and fire on bar close (alert.freq_once_per_bar_close). ⚠️ IMPORTANT NOTES — 🚫 No repainting. Signals require confirmed bars (barstate.isconfirmed); swing pivots use equal left/right lookback, so the actual pivot is in the past by Swing Length bars and is drawn only once confirmed — this is delayed confirmation, not repainting of future values. The HTF bias is requested with confirmed prior-bar values, and all alerts fire on bar close. — 📊 How wins are counted: a setup is marked a WIN as soon as TP1 is touched (1R by default). A trade that reaches TP1 and then reverses to break-even still counts as a win. This is a deliberately transparent definition, not an inflated one — read it that way when interpreting the win rate. — 📐 Stats are session-based and simulated. The dashboard reflects the indicator's own single-position logic on the loaded history and resets when the chart reloads. It is not a broker-accurate backtest and includes no fees, slippage, or funding. — ⚖️ One position at a time. A new signal can only open while flat — sweeps that occur mid-trade are shown but not traded. — 🛠️ This is an analysis tool, not an automated trading bot. It detects sweeps, scores them, confirms with structure, and builds a structured trade plan — trade decisions remain yours. — 🌐 Universal. Works on all markets and all timeframes. Volume-dependent scoring auto-neutralizes on feeds without volume. Free to use — add it to your chart and explore. Feedback and feature requests are welcome.

Indicator

by WillyAlgoTrader

Strong Pullback Signals | ProjectSyndicate Strong Pullback Signals identifies high-probability trend-continuation entries by waiting for an established trend, a clean breakout, and then a pullback — and instead of chasing the bounce, it places the entry with a limit order into the pullback at a better price. Every setup is given a structural stop beyond the pullback swing and fixed R-based targets, ranked 0–10 with a star score, and tracked live on a full statistics dashboard so you can see how the logic behaves on the exact symbol and timeframe you trade. 🧠 Limit-Into-Pullback Entry Engine — the core idea. The indicator arms only after a real breakout in the direction of the trend, then works a limit order back into the pullback rather than entering at the close of a confirmation candle. You get filled at a better price on the retracement instead of paying up after the move has already resumed. Signals confirm on closed bars and do not repaint historically. 📈 Triple-EMA Trend Regime — a fast, slow, and pullback EMA define the trend and the retracement zone. A setup can only arm when price, the EMAs, and the EMA slope all agree, so entries are taken with the trend, not against it. 🎯 Structural Stop + R-Based Targets — the stop is placed just beyond the pullback's swing extreme with an ATR buffer, then capped and floored so it can never balloon into a "wide stop" or collapse into a meaningless one. TP1, TP2, and TP3 are set at clean R multiples (TP1 defaults to a full 1R — a real first target, not a clipped one). Every signal plots its complete Entry / SL / TP1 / TP2 / TP3 line set, labeled price levels, and filled green TP / red SL zone boxes, with a result label on exit. 🎚️ Adjustable Entry Depth — one input controls how deep into the pullback the limit sits. Deeper fills mean a better entry price and fewer trades; shallower fills mean more frequent entries. This is your main dial for trading conviction versus frequency. 🧭 HTF Trend Alignment Filter — an optional higher-timeframe EMA filter blocks counter-trend setups, keeping you on the dominant side of the market. RSI-direction and session (time-of-day) screens are also available for further filtering. ⭐ 0–10 Setup-Quality Score — every signal is scored and labeled with 1–5 stars and a tier (FORMING → ELITE) across HTF alignment, trend strength, entry depth, momentum, volume, and session. Treat the score as a confluence / cleanliness read for ranking and thinning setups — it describes how textbook a setup is, not a guaranteed outcome. A "Minimum Stars / Only Strong" gate lets you display and alert on stronger setups only while the dashboard keeps tracking every tier in the background. 📊 Live Statistics Dashboard — a non-intrusive panel tracks, in real time on your chart: current trend and setup status, the active trade, the last signal and its score, win rate, total trades, profit factor, average R per trade, best-performing direction, long vs short win rate, current and max win/loss streaks, and a TP1 / TP2 / TP3 / SL hit breakdown. These are computed live from the signals on your current symbol and timeframe — so you can judge the settings yourself rather than trusting a number printed in a description. 🎨 Clean Themed Visuals — four color themes, opaque labels anchored clear of price for unobstructed reading, and a compact level "ticket" that stays attached to each trade and snaps to the exit bar when it closes. 🔔 Detailed Alerts — fires on strong long / short entries, plus partial-TP, TP3, and SL events, including direction and score, formatted for manual or automated use. A minimum-stars setting can restrict alerts to higher-conviction setups. 🔧 Fully Customizable — every component is exposed: the three EMAs and slope, breakout lookback and body filter, cooldown, entry depth, structural-stop buffer with risk cap/floor, the three R targets, the HTF / RSI / session filters, the six score weights, and all dashboard, label, and theme options. 🎯 Why this is different — most pullback and reversal tools enter by chasing a confirmation candle and treat every signal the same. This one fixes the entry mechanics first (a limit into the pullback for a better fill, with a structural stop and honest R targets), then layers an objective 0–10 ranking and a live, on-chart statistics panel on top — so you are tuning and judging the system on real, current data instead of a marketing figure. 🚀 Where to use it — trend-following markets across Forex, Gold (XAUUSD), indices, and crypto, on intraday and swing timeframes (M10/M15/M30/H1 and up). The ATR-based stop and R targets adapt to each asset's volatility automatically. 🎯 How to trade it Apply it to a market that actually trends and let the dashboard populate. Read the live win rate, profit factor, and average R for your symbol and timeframe before committing — if the logic doesn't suit that market, you'll see it. Keep the HTF Trend Alignment filter on so you only take pullbacks in the direction of the larger trend. Wait for a STRONG LONG / STRONG SHORT label — that marks a filled limit entry into a pullback, with Entry, SL, and TP1/2/3 already plotted. Manage the trade with the plotted levels: a common approach is to take partial profit at TP1 (1R), move the stop toward breakeven, and let the rest run to TP2/TP3. The structural SL defines your risk on the trade. Use Entry Depth to set your style — deeper for fewer, higher-quality fills; shallower for more activity — and use the star score and Minimum-Stars gate to focus on the cleaner setups. ⚠️ Important — this is a decision-support tool, not a standalone buy/sell system, and it makes no performance guarantees. Default settings were chosen on historical data and behavior will vary by symbol, timeframe, and configuration; the dashboard's statistics are historical and descriptive, not a forecast. The first target is a genuine 1R and the stop is structural by design (no inflated win-rate geometry), which means reward-to-risk and position sizing matter as much as hit rate. Always combine it with your own analysis and risk management, and test it on your market before trading it live.

Indicator

by ProjectSyndicate

In-depth global business and economic analysis Comprehensive trading education and market insights