Indicator
CPR by SubashCPR — Central Pivot Range with Multi-Timeframe Pivots
This indicator plots the Central Pivot Range (CPR) along with standard floor-trader pivot levels across four timeframes — daily, weekly, monthly and yearly — on a single chart. It also plots the previous period's high and low for each timeframe, and can optionally project the next period's CPR forward.
**What the Central Pivot Range is**
The CPR is a three-line zone derived from the previous period's high, low and close:
- Pivot (PP) = (High + Low + Close) / 3
- Bottom Central (BC) = (High + Low) / 2
- Top Central (TC) = Pivot − BC + Pivot
The width of the band between TC and BC reflects how balanced the previous period was. A narrow CPR indicates the prior period closed near the middle of a tight range; a wide CPR indicates a broader distribution. Traders commonly use the relationship between successive CPR bands, and price's position relative to them, as context for the session.
**Support and resistance levels**
Standard pivot-derived levels R1–R4 and S1–S4 are calculated for each timeframe using the conventional floor-trader formulas. These are geometric projections from the previous period's range, not predictions.
**Timeframe visibility**
Each set of levels only renders on chart timeframes below its own period, so the chart does not fill with irrelevant lines:
- Daily levels — intraday charts only
- Weekly levels — intraday and daily
- Monthly levels — intraday, daily and weekly
- Yearly levels — intraday through monthly
**Settings**
Every timeframe group has independent toggles for its pivot, its support/resistance set, its CPR band, and its previous-period high and low. Daily, weekly and monthly pivots plus support/resistance are enabled by default; yearly levels and all CPR bands beyond the daily one are off by default to keep the initial chart readable. A single line-width input controls all plots.
**Next CPR projection (off by default)**
The "Show Next CPR" option projects the upcoming period's CPR and pivot levels forward on the chart by a configurable bar offset. Choose the projection period — daily, weekly, monthly or yearly — with the resolution input.
**Important — this section repaints by design.** It reads the current, still-incomplete period's high, low and close in order to compute where the next period's levels would fall. Those values change as the current period develops, so the projected lines move until the period closes. This is inherent to what a forward projection is; it is not a bug, but it does mean these particular lines must not be used for signal generation, backtesting, or alerts. All other levels in the script are calculated from completed prior periods and do not repaint.
**Notes on use**
These are reference levels, not entry signals. The script produces no buy or sell markers and makes no directional claims. How useful any given level is depends entirely on the instrument, the timeframe, and the volatility regime — verify the behaviour on your own instrument before relying on it.
Indicator
Indicator
Indicator
Indicator
Advanced Trend Scanner & Screener by SPPATLEThe Advanced Trend Scanner & Screener by SPPATLE is a comprehensive PulseWire Pine Script v6 indicator engineered for swing traders, positional traders, and index analysts. It merges multi-timeframe forecasting, dynamic index/stock screening, volume-surge analytics, and an intelligent recommendation engine into a single clean layout.
Here is a detailed breakdown of its core components and architecture:
1. Dynamic Asset Detection (Stocks vs. Indices)
Smart Context Switching: The indicator automatically detects whether the active chart is an equity stock or an index (such as NIFTY, BANKNIFTY, or FINNIFTY) using symbol and type parsing.
Stock Screener Mode: When applied to a stock, the left-hand panel runs a pre-configured multi-symbol screener, sorting assets based on relative momentum and percentage change.
Index Mode: When applied to indices like Nifty or BankNifty, the left-hand panel seamlessly transitions into an Index Diagnostic View, displaying the active timeframe bias, structural status, and trend direction.
2. Multi-Timeframe Forecasting & POC Engine
Automated Trend Projections: It evaluates underlying momentum, buying/selling power, and volume expansion across multiple timeframes (15m, 1h, 4h, Daily, and Weekly) in the background.
Developing Volume POCs (Point of Control): It plots institutional liquidity and value areas across multiple lookback windows (1M, 3M, 6M, 1H, 4H, Daily, and Weekly) in a clean stepline visual format. Users can customize lookback length bars and individual toggle visibility directly from the settings menu.
3. Volume Surge & Volatility Confluence
ATR & Volume Integration: It tracks Average True Range expansion alongside a 50-day moving average volume baseline. When volume surges above historical norms while ATR expands, it triggers a high-conviction institutional participation alert.
Custom Visual Highlights: Automatically highlights exceptional volume candles with customizable vertical projection lines and distinct momentum candle body colors.
4. Intelligent Recommendation Engine
The master dashboard evaluates dozens of concurrent technical factors—including VWAP positioning, SuperTrend alignment, RSI momentum states, MACD crossovers, and volume expansions—to output a clear verdict at the base of the dashboard:
BUY: Strong bullish confluence across volume surge, institutional buying power, and structural indicators.
SELL: Dominant selling pressure, breakdown below key volume zones, and bearish momentum.
WAIT: Price consolidation phases characterized by low volume ranges awaiting breakout validation.
CAUTIOUS: Conflicting market signals requiring strict risk management parameters.
यह Advanced Trend Scanner & Screener by SPPATLE एक ऑल-इन-वन (All-in-One) प्रोफेशनल ट्रेडिंग इंडिकेटर है, जिसे विशेष रूप से स्विंग ट्रेडर्स, पोजीशनल ट्रेडर्स और इंडेक्स ट्रेडर्स की ज़रूरतों को ध्यान में रखकर डिज़ाइन किया गया है।
इस इंडिकेटर की मुख्य विशेषताएँ और कार्यप्रणाली निम्नलिखित हैं:
1. मुख्य विशेषताएँ और कंपोनेंट्स (Key Features)
मास्टर डैशबोर्ड (Master Dashboard): चार्ट के दाईं ओर नीचे (Bottom Right) एक विस्तृत डैशबोर्ड मिलता है जो वर्तमान टाइमफ़्रेम के आधार पर लाइव टेक्निकल पैरामीटर्स का विश्लेषण करता है। इसमें 200 EMA, RSI, MACD, VWAP, SuperTrend और 1M, 3M, 6M Developing Volume POCs शामिल हैं।
मल्टी-टाइमफ़्रेम फॉरकास्ट (Multi-Timeframe Forecast): 15m, 1h, 4h, Daily (1D) और Weekly (1W) टाइमफ़्रेम का ऑटोमैटिक ट्रेंड प्रेडिक्शन और उसके पीछे का कारण (Reason) दिखाता है।
डायनेमिक इंडेक्स & स्टॉक सपोर्ट: यदि आप चार्ट पर NIFTY या BANKNIFTY खोलते हैं, तो यह ऑटोमैटिक इंडेक्स मोड में आ जाता है; और यदि आप किसी स्टॉक (जैसे ABFRL) पर हैं, तो यह उसके अनुसार काम करता है।
वॉल्यूम और ATR आधारित 'Volume Surge': पिछले 50 दिनों के एवरेज वॉल्यूम/गतिविधि और ATR (Average True Range) के विस्तार के आधार पर यह पहचानता है कि ब्रेकआउट असली है या नहीं।
स्मार्ट रिकमेंडेशन (BUY / SELL / WAIT / CAUTIOUS): सभी टेक्निकल और वॉल्यूम संकेतकों का मिलान करके यह सबसे नीचे स्पष्ट सलाह देता है कि अभी ट्रेड में क्या करना चाहिए।
2. कस्टमाइज़ेशन सेटिंग्स (Customization Settings)
Show/Hide विकल्प: आप सेटिंग्स से स्क्रीनर टेबल, मास्टर डैशबोर्ड, मोमेंटम कैंडल्स और वॉल्यूम हाइलाइट लाइन्स को अपनी पसंद के अनुसार ऑन/ऑफ कर सकते हैं।
डेवलपिंग POCs (Developing POCs): 1H, 4H, Daily, Weekly और Monthly POCs को अलग-अलग शो/हाइड करने के साथ-साथ POC Lookback Candles के ज़रिए यह तय करने की सुविधा है कि पीछे की कितनी कैंडल्स से इसे ड्रा करना है।
लाइन थिकनेस और टेबल स्टाइल: हाई वॉल्यूम हाइलाइट लाइन्स की मोटाई (Thickness) बदलने और टेबल के टेक्स्ट साइज़ (Small, Normal, Large) को मैनेज करने का विकल्प भी उपलब्ध है। Indicator
Indicator
Indicator
2.0- Killzones EUR/GBP - Manuel De Jesus Leiva// This source code is subject to the terms of the Mozilla Public License 2.0 at mozilla.org
// © tradeforopp
//@version=6
indicator("Killzones EUR/GBP - Manuel De Jesus Leiva", "Killzones EUR/GBP - Manuel De Jesus Leiva", true, max_labels_count = 500, max_lines_count = 500, max_boxes_count = 500)
// ---------------------------------------- Constant Functions --------------------------------------------------
get_line_type(_style) =>
switch _style
"Solid" => line.style_solid
"Dotted" => line.style_dotted
"Dashed" => line.style_dashed
get_size(x) =>
switch x
"Auto" => size.auto
"Tiny" => size.tiny
"Small" => size.small
"Normal" => size.normal
"Large" => size.large
"Huge" => size.huge
get_table_pos(pos) =>
switch pos
"Bottom Center" => position.bottom_center
"Bottom Left" => position.bottom_left
"Bottom Right" => position.bottom_right
"Middle Center" => position.middle_center
"Middle Left" => position.middle_left
"Middle Right" => position.middle_right
"Top Center" => position.top_center
"Top Left" => position.top_left
"Top Right" => position.top_right
// ---------------------------------------- Constant Functions --------------------------------------------------
// ---------------------------------------- Inputs --------------------------------------------------
var g_SETTINGS = "Settings"
max_days = input.int(1000, "Session Drawing Limit", 1, tooltip = "Only this many drawings will be kept on the chart, for each selected drawing type (killzone boxes, pivot lines, open lines, etc.). Set to 200 for ~6 months of sessions.", group = g_SETTINGS)
tf_limit = input.timeframe("60", "Timeframe Limit", tooltip = "Drawings will not appear on timeframes greater than or equal to this", group = g_SETTINGS)
gmt_tz = input.string('America/New_York', "Timezone", options = , tooltip = "Note GMT is not adjusted to reflect Daylight Saving Time changes", group = g_SETTINGS)
lbl_size = get_size(input.string('Normal', "Label Size", options = , tooltip = "The size of all labels", group = g_SETTINGS))
txt_color = input.color(color.black, "Text Color", tooltip = "The color of all label and table text", group = g_SETTINGS)
use_cutoff = input.bool(false, "Drawing Cutoff Time", inline = "CO", tooltip = "When enabled, all pivots and open price lines will stop extending at this time", group = g_SETTINGS)
cutoff = input.session("1800-1801", "", inline = "CO", group = g_SETTINGS)
var tf_limit_is_equal_or_more_chart_tf = timeframe.in_seconds('') <= timeframe.in_seconds(tf_limit)
var g_KZ = "Killzones"
// General Killzone Settings
show_kz = input.bool(true, "Show Killzone Boxes", inline = "KZ", group = g_KZ)
show_kz_text = input.bool(false, "Display Text", inline = "KZ", group = g_KZ)
box_transparency = input.int(70, "Box Transparency", 0, 100, group = g_KZ)
text_transparency = input.int(50, "Text Transparency", 0, 100, group = g_KZ)
// ==================== KILLZONE 01 ====================
use_kz01 = input.bool(true, "00:00-01:00", inline = "KZ01", group = g_KZ)
kz01_txt = input.string("00-01", "", inline = "KZ01", group = g_KZ)
kz01 = input.session("0000-0100", "", inline = "KZ01", group = g_KZ)
kz01_color = input.color(color.blue, "", inline = "KZ01", group = g_KZ)
// ==================== KILLZONE 02 ====================
use_kz02 = input.bool(true, "01:00-02:00", inline = "KZ02", group = g_KZ)
kz02_txt = input.string("01-02", "", inline = "KZ02", group = g_KZ)
kz02 = input.session("0100-0200", "", inline = "KZ02", group = g_KZ)
kz02_color = input.color(color.blue, "", inline = "KZ02", group = g_KZ)
// ==================== KILLZONE 03 ====================
use_kz03 = input.bool(true, "02:00-03:00", inline = "KZ03", group = g_KZ)
kz03_txt = input.string("02-03", "", inline = "KZ03", group = g_KZ)
kz03 = input.session("0200-0300", "", inline = "KZ03", group = g_KZ)
kz03_color = input.color(color.blue, "", inline = "KZ03", group = g_KZ)
// ==================== KILLZONE 04 ====================
use_kz04 = input.bool(true, "03:00-04:00", inline = "KZ04", group = g_KZ)
kz04_txt = input.string("03-04", "", inline = "KZ04", group = g_KZ)
kz04 = input.session("0300-0400", "", inline = "KZ04", group = g_KZ)
kz04_color = input.color(color.blue, "", inline = "KZ04", group = g_KZ)
// ==================== KILLZONE 05 ====================
use_kz05 = input.bool(true, "04:00-05:00", inline = "KZ05", group = g_KZ)
kz05_txt = input.string("04-05", "", inline = "KZ05", group = g_KZ)
kz05 = input.session("0400-0500", "", inline = "KZ05", group = g_KZ)
kz05_color = input.color(color.blue, "", inline = "KZ05", group = g_KZ)
// ==================== KILLZONE 06 ====================
use_kz06 = input.bool(true, "05:00-06:00", inline = "KZ06", group = g_KZ)
kz06_txt = input.string("05-06", "", inline = "KZ06", group = g_KZ)
kz06 = input.session("0500-0600", "", inline = "KZ06", group = g_KZ)
kz06_color = input.color(color.blue, "", inline = "KZ06", group = g_KZ)
// ==================== KILLZONE 07 ====================
use_kz07 = input.bool(true, "06:00-07:00", inline = "KZ07", group = g_KZ)
kz07_txt = input.string("06-07", "", inline = "KZ07", group = g_KZ)
kz07 = input.session("0600-0700", "", inline = "KZ07", group = g_KZ)
kz07_color = input.color(color.blue, "", inline = "KZ07", group = g_KZ)
// ==================== KILLZONE 08 ====================
use_kz08 = input.bool(true, "07:00-08:00", inline = "KZ08", group = g_KZ)
kz08_txt = input.string("07-08", "", inline = "KZ08", group = g_KZ)
kz08 = input.session("0700-0800", "", inline = "KZ08", group = g_KZ)
kz08_color = input.color(color.blue, "", inline = "KZ08", group = g_KZ)
// ==================== KILLZONE 09 ====================
use_kz09 = input.bool(true, "08:00-09:00", inline = "KZ09", group = g_KZ)
kz09_txt = input.string("08-09", "", inline = "KZ09", group = g_KZ)
kz09 = input.session("0800-0900", "", inline = "KZ09", group = g_KZ)
kz09_color = input.color(color.blue, "", inline = "KZ09", group = g_KZ)
// ==================== KILLZONE 10 ====================
use_kz10 = input.bool(true, "09:00-10:00", inline = "KZ10", group = g_KZ)
kz10_txt = input.string("09-10", "", inline = "KZ10", group = g_KZ)
kz10 = input.session("0900-1000", "", inline = "KZ10", group = g_KZ)
kz10_color = input.color(color.blue, "", inline = "KZ10", group = g_KZ)
// ==================== KILLZONE 11 ====================
use_kz11 = input.bool(true, "10:00-11:00", inline = "KZ11", group = g_KZ)
kz11_txt = input.string("10-11", "", inline = "KZ11", group = g_KZ)
kz11 = input.session("1000-1100", "", inline = "KZ11", group = g_KZ)
kz11_color = input.color(color.blue, "", inline = "KZ11", group = g_KZ)
// ==================== KILLZONE 12 ====================
use_kz12 = input.bool(true, "11:00-12:00", inline = "KZ12", group = g_KZ)
kz12_txt = input.string("11-12", "", inline = "KZ12", group = g_KZ)
kz12 = input.session("1100-1200", "", inline = "KZ12", group = g_KZ)
kz12_color = input.color(color.blue, "", inline = "KZ12", group = g_KZ)
// ==================== KILLZONE 13 ====================
use_kz13 = input.bool(true, "12:00-13:00", inline = "KZ13", group = g_KZ)
kz13_txt = input.string("12-13", "", inline = "KZ13", group = g_KZ)
kz13 = input.session("1200-1300", "", inline = "KZ13", group = g_KZ)
kz13_color = input.color(color.blue, "", inline = "KZ13", group = g_KZ)
// ==================== KILLZONE 14 ====================
use_kz14 = input.bool(true, "13:00-14:00", inline = "KZ14", group = g_KZ)
kz14_txt = input.string("13-14", "", inline = "KZ14", group = g_KZ)
kz14 = input.session("1300-1400", "", inline = "KZ14", group = g_KZ)
kz14_color = input.color(color.blue, "", inline = "KZ14", group = g_KZ)
// ==================== KILLZONE 15 ====================
use_kz15 = input.bool(true, "14:00-15:00", inline = "KZ15", group = g_KZ)
kz15_txt = input.string("14-15", "", inline = "KZ15", group = g_KZ)
kz15 = input.session("1400-1500", "", inline = "KZ15", group = g_KZ)
kz15_color = input.color(color.blue, "", inline = "KZ15", group = g_KZ)
// ==================== KILLZONE 16 ====================
use_kz16 = input.bool(true, "15:00-16:00", inline = "KZ16", group = g_KZ)
kz16_txt = input.string("15-16", "", inline = "KZ16", group = g_KZ)
kz16 = input.session("1500-1600", "", inline = "KZ16", group = g_KZ)
kz16_color = input.color(color.blue, "", inline = "KZ16", group = g_KZ)
// ==================== KILLZONE 17 ====================
use_kz17 = input.bool(true, "16:00-17:00", inline = "KZ17", group = g_KZ)
kz17_txt = input.string("16-17", "", inline = "KZ17", group = g_KZ)
kz17 = input.session("1600-1700", "", inline = "KZ17", group = g_KZ)
kz17_color = input.color(color.blue, "", inline = "KZ17", group = g_KZ)
// ==================== KILLZONE 18 ====================
use_kz18 = input.bool(true, "17:00-18:00", inline = "KZ18", group = g_KZ)
kz18_txt = input.string("17-18", "", inline = "KZ18", group = g_KZ)
kz18 = input.session("1700-1800", "", inline = "KZ18", group = g_KZ)
kz18_color = input.color(color.blue, "", inline = "KZ18", group = g_KZ)
// ==================== KILLZONE 19 ====================
use_kz19 = input.bool(true, "18:00-19:00", inline = "KZ19", group = g_KZ)
kz19_txt = input.string("18-19", "", inline = "KZ19", group = g_KZ)
kz19 = input.session("1800-1900", "", inline = "KZ19", group = g_KZ)
kz19_color = input.color(color.blue, "", inline = "KZ19", group = g_KZ)
// ==================== KILLZONE 20 ====================
use_kz20 = input.bool(true, "19:00-20:00", inline = "KZ20", group = g_KZ)
kz20_txt = input.string("19-20", "", inline = "KZ20", group = g_KZ)
kz20 = input.session("1900-2000", "", inline = "KZ20", group = g_KZ)
kz20_color = input.color(color.blue, "", inline = "KZ20", group = g_KZ)
// ==================== KILLZONE 21 ====================
use_kz21 = input.bool(true, "20:00-21:00", inline = "KZ21", group = g_KZ)
kz21_txt = input.string("20-21", "", inline = "KZ21", group = g_KZ)
kz21 = input.session("2000-2100", "", inline = "KZ21", group = g_KZ)
kz21_color = input.color(color.blue, "", inline = "KZ21", group = g_KZ)
// ==================== KILLZONE 22 ====================
use_kz22 = input.bool(true, "21:00-22:00", inline = "KZ22", group = g_KZ)
kz22_txt = input.string("21-22", "", inline = "KZ22", group = g_KZ)
kz22 = input.session("2100-2200", "", inline = "KZ22", group = g_KZ)
kz22_color = input.color(color.blue, "", inline = "KZ22", group = g_KZ)
// ==================== KILLZONE 23 ====================
use_kz23 = input.bool(true, "22:00-23:00", inline = "KZ23", group = g_KZ)
kz23_txt = input.string("22-23", "", inline = "KZ23", group = g_KZ)
kz23 = input.session("2200-2300", "", inline = "KZ23", group = g_KZ)
kz23_color = input.color(color.blue, "", inline = "KZ23", group = g_KZ)
// ==================== KILLZONE 24 ====================
use_kz24 = input.bool(true, "23:00-00:00", inline = "KZ24", group = g_KZ)
kz24_txt = input.string("23-00", "", inline = "KZ24", group = g_KZ)
kz24 = input.session("2300-0000", "", inline = "KZ24", group = g_KZ)
kz24_color = input.color(color.blue, "", inline = "KZ24", group = g_KZ)
// ==================== KILLZONE 25 ====================
use_kz25 = input.bool(true, "17:00-21:00", inline = "KZ25", group = g_KZ)
kz25_txt = input.string("H4", "", inline = "KZ25", group = g_KZ)
kz25 = input.session("1700-2100", "", inline = "KZ25", group = g_KZ)
kz25_color = input.color(color.orange, "", inline = "KZ25", group = g_KZ)
// ==================== KILLZONE 26 ====================
use_kz26 = input.bool(true, "21:00-01:00", inline = "KZ26", group = g_KZ)
kz26_txt = input.string("H4", "", inline = "KZ26", group = g_KZ)
kz26 = input.session("2100-0100", "", inline = "KZ26", group = g_KZ)
kz26_color = input.color(color.aqua, "", inline = "KZ26", group = g_KZ)
// ==================== KILLZONE 27 ====================
use_kz27 = input.bool(true, "01:00-05:00", inline = "KZ27", group = g_KZ)
kz27_txt = input.string("H4", "", inline = "KZ27", group = g_KZ)
kz27 = input.session("0100-0500", "", inline = "KZ27", group = g_KZ)
kz27_color = input.color(color.green, "", inline = "KZ27", group = g_KZ)
// ==================== KILLZONE 28 ====================
use_kz28 = input.bool(true, "05:00-09:00", inline = "KZ28", group = g_KZ)
kz28_txt = input.string("H4", "", inline = "KZ28", group = g_KZ)
kz28 = input.session("0500-0900", "", inline = "KZ28", group = g_KZ)
kz28_color = input.color(color.yellow, "", inline = "KZ28", group = g_KZ)
// ==================== KILLZONE 29 ====================
use_kz29 = input.bool(true, "09:00-13:00", inline = "KZ29", group = g_KZ)
kz29_txt = input.string("H4", "", inline = "KZ29", group = g_KZ)
kz29 = input.session("0900-1300", "", inline = "KZ29", group = g_KZ)
kz29_color = input.color(color.red, "", inline = "KZ29", group = g_KZ)
// ==================== KILLZONE 30 ====================
use_kz30 = input.bool(true, "13:00-17:00", inline = "KZ30", group = g_KZ)
kz30_txt = input.string("H4", "", inline = "KZ30", group = g_KZ)
kz30 = input.session("1300-1700", "", inline = "KZ30", group = g_KZ)
kz30_color = input.color(color.purple, "", inline = "KZ30", group = g_KZ)
// ==================== KILLZONE 31 ====================
use_kz31 = input.bool(false, "05:00-17:00", inline = "KZ31", group = g_KZ)
kz31_txt = input.string("H12", "", inline = "KZ31", group = g_KZ)
kz31 = input.session("0500-1700", "", inline = "KZ31", group = g_KZ)
kz31_color = input.color(color.purple, "", inline = "KZ31", group = g_KZ)
// ==================== KILLZONE 32 ====================
use_kz32 = input.bool(false, "17:00-05:00", inline = "KZ32", group = g_KZ)
kz32_txt = input.string("H12", "", inline = "KZ32", group = g_KZ)
kz32 = input.session("1700-0500", "", inline = "KZ32", group = g_KZ)
kz32_color = input.color(color.purple, "", inline = "KZ32", group = g_KZ)
// ==================== KILLZONE 33 ====================
use_kz33 = input.bool(false, "17:00-01:00", inline = "KZ33", group = g_KZ)
kz33_txt = input.string("H8", "", inline = "KZ33", group = g_KZ)
kz33 = input.session("1700-0100", "", inline = "KZ33", group = g_KZ)
kz33_color = input.color(color.purple, "", inline = "KZ33", group = g_KZ)
// ==================== KILLZONE 34 ====================
use_kz34 = input.bool(false, "01:00-09:00", inline = "KZ34", group = g_KZ)
kz34_txt = input.string("H8", "", inline = "KZ34", group = g_KZ)
kz34 = input.session("0100-0900", "", inline = "KZ34", group = g_KZ)
kz34_color = input.color(color.purple, "", inline = "KZ34", group = g_KZ)
// ==================== KILLZONE 35 ====================
use_kz35 = input.bool(false, "09:00-17:00", inline = "KZ35", group = g_KZ)
kz35_txt = input.string("H8", "", inline = "KZ35", group = g_KZ)
kz35 = input.session("0900-1700", "", inline = "KZ35", group = g_KZ)
kz35_color = input.color(color.purple, "", inline = "KZ35", group = g_KZ)
// ==================== KILLZONE 36 ====================
use_kz36 = input.bool(false, "17:00-23:00", inline = "KZ36", group = g_KZ)
kz36_txt = input.string("H6", "", inline = "KZ36", group = g_KZ)
kz36 = input.session("1700-2300", "", inline = "KZ36", group = g_KZ)
kz36_color = input.color(color.purple, "", inline = "KZ36", group = g_KZ)
// ==================== KILLZONE 37 ====================
use_kz37 = input.bool(false, "23:00-05:00", inline = "KZ37", group = g_KZ)
kz37_txt = input.string("H6", "", inline = "KZ37", group = g_KZ)
kz37 = input.session("2300-0500", "", inline = "KZ37", group = g_KZ)
kz37_color = input.color(color.purple, "", inline = "KZ37", group = g_KZ)
// ==================== KILLZONE 38 ====================
use_kz38 = input.bool(false, "05:00-11:00", inline = "KZ38", group = g_KZ)
kz38_txt = input.string("H6", "", inline = "KZ38", group = g_KZ)
kz38 = input.session("0500-1100", "", inline = "KZ38", group = g_KZ)
kz38_color = input.color(color.purple, "", inline = "KZ38", group = g_KZ)
// ==================== KILLZONE 39 ====================
use_kz39 = input.bool(false, "11:00-17:00", inline = "KZ39", group = g_KZ)
kz39_txt = input.string("H6", "", inline = "KZ39", group = g_KZ)
kz39 = input.session("1100-1700", "", inline = "KZ39", group = g_KZ)
kz39_color = input.color(color.purple, "", inline = "KZ39", group = g_KZ)
var g_LABELS = "Killzone Pivots"
show_pivots = input.bool(false, "Show Pivots", inline = "PV", group = g_LABELS)
use_alerts = input.bool(false, "Alert Broken Pivots", inline = "PV", tooltip = "The desired killzones must be enabled at the time that an alert is created, along with the show pivots option, in order for alerts to work", group = g_LABELS)
show_midpoints = input.bool(false, "Show Pivot Midpoints", inline = "mp", group = g_LABELS)
stop_midpoints = input.bool(false, "Stop Once Mitigated", inline = "mp", group = g_LABELS)
show_labels = input.bool(false, "Show Pivot Labels", inline = "LB", tooltip = "Show labels denoting each killzone's high and low. Optionally choose to show the price of each level. Right side will show labels on the right-hand side of the chart until they are reached", group = g_LABELS)
label_price = input.bool(false, "Display Price", inline = "LB", group = g_LABELS)
label_right = input.bool(false, "Right Side", inline = "LB", group = g_LABELS)
ext_pivots = input.string("Until Mitigated", "Extend Pivots...", options = , group = g_LABELS)
ext_which = input.string("All", "...From Which Sessions", options = , group = g_LABELS)
ash_str = input.string("AS.H", "Killzone 1 Labels", inline = "L_AS", group = g_LABELS)
asl_str = input.string("AS.L", "", inline = "L_AS", group = g_LABELS)
loh_str = input.string("LO.H", "Killzone 2 Labels", inline = "L_LO", group = g_LABELS)
lol_str = input.string("LO.L", "", inline = "L_LO", group = g_LABELS)
nah_str = input.string("NYAM.H", "Killzone 3 Labels", inline = "L_NA", group = g_LABELS)
nal_str = input.string("NYAM.L", "", inline = "L_NA", group = g_LABELS)
nlh_str = input.string("NYL.H", "Killzone 4 Labels", inline = "L_NL", group = g_LABELS)
nll_str = input.string("NYL.L", "", inline = "L_NL", group = g_LABELS)
nph_str = input.string("NYPM.H", "Killzone 5 Labels", inline = "L_NP", group = g_LABELS)
npl_str = input.string("NYPM.L", "", inline = "L_NP", group = g_LABELS)
kzp_style = get_line_type(input.string(defval = 'Solid', title = "Pivot Style", options = , inline = "KZP", group = g_LABELS))
kzp_width = input.int(1, "", inline = "KZP", group = g_LABELS)
kzm_style = get_line_type(input.string(defval = 'Dotted', title = "Midpoint Style", options = , inline = "KZM", group = g_LABELS))
kzm_width = input.int(1, "", inline = "KZM", group = g_LABELS)
var g_RNG = "Killzone Range"
show_range = input.bool(false, "Show Killzone Range", tooltip = "Show the most recent ranges of each selected killzone, from high to low", group = g_RNG)
show_range_avg = input.bool(false, "Show Average", tooltip = "Show the average range of each selected killzone", group = g_RNG)
range_avg = input.int(5, "Average Length", 0, tooltip = "This many previous sessions will be used to calculate the average. If there isn't enough data on the current chart, it will use as many sessions as possible", group = g_RNG)
range_pos = get_table_pos(input.string('Top Right', "Table Position", options = , group = g_RNG))
range_size = get_size(input.string('Normal', "Table Size", options = , group = g_RNG))
var g_DWM = "Day - Week - Month"
sep_unlimited = input.bool(false, "Unlimited", tooltip = "Unlimited will show as many of the selected lines as possible. Otherwise, the session drawing limit will be used", group = g_DWM)
alert_HL = input.bool(false, "Alert High/Low Break", tooltip = "Alert when any selected highs and lows are traded through. The desired timeframe's high/low option must be enabled at the time that an alert is created", group = g_DWM)
show_d_open = input.bool(false, "D Open", inline = "DO", group = g_DWM)
dhl = input.bool(false, "High/Low", inline = "DO", tooltip = "", group = g_DWM)
ds = input.bool(false, "Separators", inline = "DO", tooltip = "Mark where a new day begins", group = g_DWM)
d_color = input.color(color.blue, "", inline = "DO", group = g_DWM)
show_w_open = input.bool(false, "W Open", inline = "WO", group = g_DWM)
whl = input.bool(false, "High/Low", inline = "WO", tooltip = "", group = g_DWM)
ws = input.bool(false, "Separators", inline = "WO", tooltip = "Mark where a new week begins", group = g_DWM)
w_color = input.color(#089981, "", inline = "WO", group = g_DWM)
show_m_open = input.bool(false, "M Open", inline = "MO", group = g_DWM)
mhl = input.bool(false, "High/Low", inline = "MO", tooltip = "", group = g_DWM)
ms = input.bool(false, "Separators", inline = "MO", tooltip = "Mark where a new month begins", group = g_DWM)
m_color = input.color(color.red, "", inline = "MO", group = g_DWM)
htf_style = get_line_type(input.string(defval = 'Solid', title = "Style", options = , inline = "D0", group = g_DWM))
htf_width = input.int(1, "", inline = "D0", group = g_DWM)
dow_labels = input.bool(false, "Day of Week Labels", inline = "DOW", group = g_DWM)
dow_yloc = input.string('Bottom', "", options = , inline = "DOW", group = g_DWM)
dow_xloc = input.string('Midnight', "", options = , inline = "DOW", group = g_DWM)
dow_hide_wknd = input.bool(false, "Hide Weekend Labels", group = g_DWM)
var g_OPEN = "Opening Prices"
open_unlimited = input.bool(false, "Unlimited", tooltip = "Unlimited will show as many of the selected lines as possible. Otherwise, the session drawing limit will be used", group = g_OPEN)
use_h1 = input.bool(false, "", inline = "H1", group = g_OPEN)
h1_text = input.string("17:00 H12/H8/H6/H4", "", inline = "H1", group = g_OPEN)
h1 = input.session("1700-1701", "", inline = "H1", group = g_OPEN)
h1_color = input.color(color.black, "", inline = "H1", group = g_OPEN)
use_h2 = input.bool(false, "", inline = "H2", group = g_OPEN)
h2_text = input.string("05:00 H12/H6/H4", "", inline = "H2", group = g_OPEN)
h2 = input.session("0500-0501", "", inline = "H2", group = g_OPEN)
h2_color = input.color(color.black, "", inline = "H2", group = g_OPEN)
use_h3 = input.bool(false, "", inline = "H3", group = g_OPEN)
h3_text = input.string("01:00 H8/H4", "", inline = "H3", group = g_OPEN)
h3 = input.session("0100-0101", "", inline = "H3", group = g_OPEN)
h3_color = input.color(color.black, "", inline = "H3", group = g_OPEN)
use_h4 = input.bool(false, "", inline = "H4", group = g_OPEN)
h4_text = input.string("09:00 H8/H4", "", inline = "H4", group = g_OPEN)
h4 = input.session("0900-0901", "", inline = "H4", group = g_OPEN)
h4_color = input.color(color.black, "", inline = "H4", group = g_OPEN)
use_h5 = input.bool(false, "", inline = "H5", group = g_OPEN)
h5_text = input.string("23:00 H6", "", inline = "H5", group = g_OPEN)
h5 = input.session("2300-2301", "", inline = "H5", group = g_OPEN)
h5_color = input.color(color.black, "", inline = "H5", group = g_OPEN)
use_h6 = input.bool(false, "", inline = "H6", group = g_OPEN)
h6_text = input.string("11:00 H6", "", inline = "H6", group = g_OPEN)
h6 = input.session("1100-1101", "", inline = "H6", group = g_OPEN)
h6_color = input.color(color.black, "", inline = "H6", group = g_OPEN)
use_h7 = input.bool(false, "", inline = "H7", group = g_OPEN)
h7_text = input.string("21:00 H4", "", inline = "H7", group = g_OPEN)
h7 = input.session("2100-2101", "", inline = "H7", group = g_OPEN)
h7_color = input.color(color.black, "", inline = "H7", group = g_OPEN)
use_h8 = input.bool(false, "", inline = "H8", group = g_OPEN)
h8_text = input.string("13:00 H4", "", inline = "H8", group = g_OPEN)
h8 = input.session("1300-1301", "", inline = "H8", group = g_OPEN)
h8_color = input.color(color.black, "", inline = "H8", group = g_OPEN)
hz_style = get_line_type(input.string(defval = 'Dotted', title = "Style", options = , inline = "H0", group = g_OPEN))
hz_width = input.int(1, "", inline = "H0", group = g_OPEN)
var g_VERTICAL = "Timestamps"
v_unlimited = input.bool(false, "Unlimited", tooltip = "Unlimited will show as many of the selected lines as possible. Otherwise, the session drawing limit will be used", group = g_VERTICAL)
use_v1 = input.bool(false, "", inline = "V1", group = g_VERTICAL)
v1 = input.session("0000-0001", "", inline = "V1", group = g_VERTICAL)
v1_color = input.color(color.black, "", inline = "V1", group = g_VERTICAL)
use_v2 = input.bool(false, "", inline = "V2", group = g_VERTICAL)
v2 = input.session("0800-0801", "", inline = "V2", group = g_VERTICAL)
v2_color = input.color(color.black, "", inline = "V2", group = g_VERTICAL)
use_v3 = input.bool(false, "", inline = "V3", group = g_VERTICAL)
v3 = input.session("1000-1001", "", inline = "V3", group = g_VERTICAL)
v3_color = input.color(color.black, "", inline = "V3", group = g_VERTICAL)
use_v4 = input.bool(false, "", inline = "V4", group = g_VERTICAL)
v4 = input.session("1200-1201", "", inline = "V4", group = g_VERTICAL)
v4_color = input.color(color.black, "", inline = "V4", group = g_VERTICAL)
vl_style = get_line_type(input.string(defval = 'Dotted', title = "Style", options = , inline = "V0", group = g_VERTICAL))
vl_width = input.int(1, "", inline = "V0", group = g_VERTICAL)
// ---------------------------------------- Inputs --------------------------------------------------
// ---------------------------------------- Variables & Constants --------------------------------------------------
type kz
string _title
array _box
array _hi_line
array _md_line
array _lo_line
array _hi_label
array _lo_label
array _hi_valid
array _md_valid
array _lo_valid
array _range_store
float _range_current
type hz
array LN
array LB
array CO
type dwm_hl
array hi_line
array lo_line
array hi_label
array lo_label
bool hit_high = false
bool hit_low = false
type dwm_info
string tf
float o = na
float h = na
float l = na
float ph = na
float pl = na
type lines_helper
hz _hz
string h
string h_text
color h_color
initLines() =>
array res = array.new()
if use_h1
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h1, h1_text, h1_color))
if use_h2
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h2, h2_text, h2_color))
if use_h3
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h3, h3_text, h3_color))
if use_h4
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h4, h4_text, h4_color))
if use_h5
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h5, h5_text, h5_color))
if use_h6
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h6, h6_text, h6_color))
if use_h7
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h7, h7_text, h7_color))
if use_h8
res.push(lines_helper.new(hz.new(array.new_line(), array.new_label(), array.new_bool()), h8, h8_text, h8_color))
res
var array lines = initLines()
type kz_helper
kz _kz
string session
color c
string box_txt
string hi_txt
string lo_txt
initKZ() =>
array res = array.new()
if use_kz01
res.push(kz_helper.new(
kz.new(kz01_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz01, kz01_color, kz01_txt, "KZ01.H", "KZ01.L"
))
if use_kz02
res.push(kz_helper.new(
kz.new(kz02_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz02, kz02_color, kz02_txt, "KZ02.H", "KZ02.L"
))
if use_kz03
res.push(kz_helper.new(
kz.new(kz03_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz03, kz03_color, kz03_txt, "KZ03.H", "KZ03.L"
))
if use_kz04
res.push(kz_helper.new(
kz.new(kz04_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz04, kz04_color, kz04_txt, "KZ04.H", "KZ04.L"
))
if use_kz05
res.push(kz_helper.new(
kz.new(kz05_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz05, kz05_color, kz05_txt, "KZ05.H", "KZ05.L"
))
if use_kz06
res.push(kz_helper.new(
kz.new(kz06_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz06, kz06_color, kz06_txt, "KZ06.H", "KZ06.L"
))
if use_kz07
res.push(kz_helper.new(
kz.new(kz07_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz07, kz07_color, kz07_txt, "KZ07.H", "KZ07.L"
))
if use_kz08
res.push(kz_helper.new(
kz.new(kz08_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz08, kz08_color, kz08_txt, "KZ08.H", "KZ08.L"
))
if use_kz09
res.push(kz_helper.new(
kz.new(kz09_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz09, kz09_color, kz09_txt, "KZ09.H", "KZ09.L"
))
if use_kz10
res.push(kz_helper.new(
kz.new(kz10_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz10, kz10_color, kz10_txt, "KZ10.H", "KZ10.L"
))
if use_kz11
res.push(kz_helper.new(
kz.new(kz11_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz11, kz11_color, kz11_txt, "KZ11.H", "KZ11.L"
))
if use_kz12
res.push(kz_helper.new(
kz.new(kz12_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz12, kz12_color, kz12_txt, "KZ12.H", "KZ12.L"
))
if use_kz13
res.push(kz_helper.new(
kz.new(kz13_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz13, kz13_color, kz13_txt, "KZ13.H", "KZ13.L"
))
if use_kz14
res.push(kz_helper.new(
kz.new(kz14_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz14, kz14_color, kz14_txt, "KZ14.H", "KZ14.L"
))
if use_kz15
res.push(kz_helper.new(
kz.new(kz15_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz15, kz15_color, kz15_txt, "KZ15.H", "KZ15.L"
))
if use_kz16
res.push(kz_helper.new(
kz.new(kz16_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz16, kz16_color, kz16_txt, "KZ16.H", "KZ16.L"
))
if use_kz17
res.push(kz_helper.new(
kz.new(kz17_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz17, kz17_color, kz17_txt, "KZ17.H", "KZ17.L"
))
if use_kz18
res.push(kz_helper.new(
kz.new(kz18_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz18, kz18_color, kz18_txt, "KZ18.H", "KZ18.L"
))
if use_kz19
res.push(kz_helper.new(
kz.new(kz19_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz19, kz19_color, kz19_txt, "KZ19.H", "KZ19.L"
))
if use_kz20
res.push(kz_helper.new(
kz.new(kz20_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz20, kz20_color, kz20_txt, "KZ20.H", "KZ20.L"
))
if use_kz21
res.push(kz_helper.new(
kz.new(kz21_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz21, kz21_color, kz21_txt, "KZ21.H", "KZ21.L"
))
if use_kz22
res.push(kz_helper.new(
kz.new(kz22_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz22, kz22_color, kz22_txt, "KZ22.H", "KZ22.L"
))
if use_kz23
res.push(kz_helper.new(
kz.new(kz23_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz23, kz23_color, kz23_txt, "KZ23.H", "KZ23.L"
))
if use_kz24
res.push(kz_helper.new(
kz.new(kz24_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz24, kz24_color, kz24_txt, "KZ24.H", "KZ24.L"
))
if use_kz25
res.push(kz_helper.new(
kz.new(kz25_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz25, kz25_color, kz25_txt, "KZ25.H", "KZ25.L"
))
if use_kz26
res.push(kz_helper.new(
kz.new(kz26_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz26, kz26_color, kz26_txt, "KZ26.H", "KZ26.L"
))
if use_kz27
res.push(kz_helper.new(
kz.new(kz27_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz27, kz27_color, kz27_txt, "KZ27.H", "KZ27.L"
))
if use_kz28
res.push(kz_helper.new(
kz.new(kz28_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz28, kz28_color, kz28_txt, "KZ28.H", "KZ28.L"
))
if use_kz29
res.push(kz_helper.new(
kz.new(kz29_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz29, kz29_color, kz29_txt, "KZ29.H", "KZ29.L"
))
if use_kz30
res.push(kz_helper.new(
kz.new(kz30_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz30, kz30_color, kz30_txt, "KZ30.H", "KZ30.L"
))
if use_kz31
res.push(kz_helper.new(
kz.new(kz31_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz31, kz31_color, kz31_txt, "KZ31.H", "KZ31.L"
))
if use_kz32
res.push(kz_helper.new(
kz.new(kz32_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz32, kz32_color, kz32_txt, "KZ32.H", "KZ32.L"
))
if use_kz33
res.push(kz_helper.new(
kz.new(kz33_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz33, kz33_color, kz33_txt, "KZ33.H", "KZ33.L"
))
if use_kz34
res.push(kz_helper.new(
kz.new(kz34_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz34, kz34_color, kz34_txt, "KZ34.H", "KZ34.L"
))
if use_kz35
res.push(kz_helper.new(
kz.new(kz35_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz35, kz35_color, kz35_txt, "KZ35.H", "KZ35.L"
))
if use_kz36
res.push(kz_helper.new(
kz.new(kz36_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz36, kz36_color, kz36_txt, "KZ36.H", "KZ36.L"
))
if use_kz37
res.push(kz_helper.new(
kz.new(kz37_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz37, kz37_color, kz37_txt, "KZ37.H", "KZ37.L"
))
if use_kz38
res.push(kz_helper.new(
kz.new(kz38_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz38, kz38_color, kz38_txt, "KZ38.H", "KZ38.L"
))
if use_kz39
res.push(kz_helper.new(
kz.new(kz39_txt, array.new_box(), array.new_line(), array.new_line(), array.new_line(), array.new_label(), array.new_label(), array.new_bool(), array.new_bool(), array.new_bool(), array.new_float()),
kz39, kz39_color, kz39_txt, "KZ39.H", "KZ39.L"
))
res
var array _kz = initKZ()
var d_hl = dwm_hl.new(array.new_line(), array.new_line(), array.new_label(), array.new_label())
var w_hl = dwm_hl.new(array.new_line(), array.new_line(), array.new_label(), array.new_label())
var m_hl = dwm_hl.new(array.new_line(), array.new_line(), array.new_label(), array.new_label())
var d_info = dwm_info.new("D")
var w_info = dwm_info.new("W")
var m_info = dwm_info.new("M")
t_co = not na(time("", cutoff, gmt_tz))
type ts_helper
string session
array lines
color c
initTS() =>
array res = array.new()
if use_v1
res.push(ts_helper.new(v1, array.new_line(), v1_color))
if use_v2
res.push(ts_helper.new(v2, array.new_line(), v2_color))
if use_v3
res.push(ts_helper.new(v3, array.new_line(), v3_color))
if use_v4
res.push(ts_helper.new(v4, array.new_line(), v4_color))
res
var array ts_data = initTS()
var d_sep_line = array.new_line()
var w_sep_line = array.new_line()
var m_sep_line = array.new_line()
var d_line = array.new_line()
var w_line = array.new_line()
var m_line = array.new_line()
var d_label = array.new_label()
var w_label = array.new_label()
var m_label = array.new_label()
var transparent = #ffffff00
var ext_current = ext_which == 'Most Recent'
var ext_past = ext_pivots == 'Past Mitigation'
update_dwm_info(dwm_info n) =>
if timeframe.change(n.tf)
n.ph := n.h
n.pl := n.l
n.o := open
n.h := high
n.l := low
else
n.h := math.max(high, n.h)
n.l := math.min(low, n.l)
if dhl or show_d_open
update_dwm_info(d_info)
if whl or show_w_open
update_dwm_info(w_info)
if mhl or show_m_open
update_dwm_info(m_info)
// ---------------------------------------- Variables & Constants --------------------------------------------------
// ---------------------------------------- Functions --------------------------------------------------
get_box_color(color c) =>
color.new(c, box_transparency)
get_text_color(color c) =>
color.new(c, text_transparency)
// ---------------------------------------- Functions --------------------------------------------------
// ---------------------------------------- Core Logic --------------------------------------------------
dwm_sep(string tf, bool use, array arr, color col) =>
if use
if timeframe.change(tf)
arr.unshift(line.new(bar_index, high * 1.0001, bar_index, low, style = htf_style, width = htf_width, extend = extend.both, color = col))
if not sep_unlimited and arr.size() > max_days
arr.pop().delete()
dwm_open(string tf, bool use, array lns, array lbls, dwm_info n, color col) =>
if use
if lns.size() > 0
lns.get(0).set_x2(time)
lbls.get(0).set_x(time)
if timeframe.change(tf)
lns.unshift(line.new(time, n.o, time, n.o, xloc = xloc.bar_time, style = htf_style, width = htf_width, color = col))
lbls.unshift(label.new(time, n.o, tf + " OPEN", xloc = xloc.bar_time, style = label.style_label_left, color = transparent, textcolor = txt_color, size = lbl_size))
if not sep_unlimited and lns.size() > max_days
lns.pop().delete()
lbls.pop().delete()
dwm_hl(string tf, bool use, dwm_hl hl, dwm_info n, color col) =>
if use
if hl.hi_line.size() > 0
hl.hi_line.get(0).set_x2(time)
hl.lo_line.get(0).set_x2(time)
hl.hi_label.get(0).set_x(time)
hl.lo_label.get(0).set_x(time)
if timeframe.change(tf)
hl.hi_line.unshift(line.new(time, n.ph, time, n.ph, xloc = xloc.bar_time, style = htf_style, width = htf_width, color = col))
hl.lo_line.unshift(line.new(time, n.pl, time, n.pl, xloc = xloc.bar_time, style = htf_style, width = htf_width, color = col))
hl.hi_label.unshift(label.new(time, n.ph, "P" + tf + "H", xloc = xloc.bar_time, style = label.style_label_left, color = transparent, textcolor = txt_color, size = lbl_size))
hl.lo_label.unshift(label.new(time, n.pl, "P" + tf + "L", xloc = xloc.bar_time, style = label.style_label_left, color = transparent, textcolor = txt_color, size = lbl_size))
hl.hit_high := false
hl.hit_low := false
if not sep_unlimited and hl.hi_line.size() > max_days
hl.hi_line.pop().delete()
hl.lo_line.pop().delete()
hl.hi_label.pop().delete()
hl.lo_label.pop().delete()
if hl.hi_line.size() > 0 and alert_HL
if not hl.hit_high and high > hl.hi_line.get(0).get_y1()
hl.hit_high := true
alert(str.format("Hit P{0}H", tf))
if not hl.hit_low and low < hl.lo_line.get(0).get_y1()
hl.hit_low := true
alert(str.format("Hit P{0}L", tf))
dwm() =>
if tf_limit_is_equal_or_more_chart_tf
// DWM - Separators
dwm_sep("D", ds, d_sep_line, d_color)
dwm_sep("W", ws, w_sep_line, w_color)
dwm_sep("M", ms, m_sep_line, m_color)
// DWM - Open Lines
dwm_open("D", show_d_open, d_line, d_label, d_info, d_color)
dwm_open("W", show_w_open, w_line, w_label, w_info, w_color)
dwm_open("M", show_m_open, m_line, m_label, m_info, m_color)
// DWM - Highs and Lows
dwm_hl("D", dhl, d_hl, d_info, d_color)
dwm_hl("W", whl, w_hl, w_info, w_color)
dwm_hl("M", mhl, m_hl, m_info, m_color)
method vline(ts_helper this) =>
bool t = not na(time("", this.session, gmt_tz))
bool t_prev = not na(time("", this.session, gmt_tz, bars_back = 1))
array arr = this.lines
color col = this.c
if t and not t_prev
arr.unshift(line.new(bar_index, high * 1.0001, bar_index, low, style = vl_style, width = vl_width, extend = extend.both, color = col))
if not v_unlimited
if arr.size() > max_days
arr.pop().delete()
vlines() =>
if tf_limit_is_equal_or_more_chart_tf
for in ts_data
vline(value)
method hz_line(lines_helper this) =>
bool t = not na(time("", this.h, gmt_tz))
bool t_prev = not na(time("", this.h, gmt_tz, bars_back = 1))
hz hz = this._hz
string txt = this.h_text
color col = this.h_color
if t and not t_prev
hz.LN.unshift(line.new(bar_index, open, bar_index, open, style = hz_style, width = hz_width, color = col))
hz.LB.unshift(label.new(bar_index, open, txt, style = label.style_label_left, color = transparent, textcolor = txt_color, size = lbl_size))
array.unshift(hz.CO, false)
if not open_unlimited and hz.LN.size() > max_days
hz.LN.pop().delete()
hz.LB.pop().delete()
hz.CO.pop()
if not t and hz.CO.size() > 0
if not hz.CO.get(0)
hz.LN.get(0).set_x2(bar_index)
hz.LB.get(0).set_x(bar_index)
if (use_cutoff ? t_co : false)
hz.CO.set(0, true)
hz_lines() =>
if tf_limit_is_equal_or_more_chart_tf
for in lines
hz_line(value)
del_kz(kz k) =>
if k._box.size() > max_days
k._box.pop().delete()
if k._hi_line.size() > max_days
k._hi_line.pop().delete()
k._lo_line.pop().delete()
k._hi_valid.pop()
k._lo_valid.pop()
if show_midpoints
k._md_line.pop().delete()
k._md_valid.pop()
if k._hi_label.size() > max_days
k._hi_label.pop().delete()
k._lo_label.pop().delete()
update_price_string(label L, float P) =>
S = L.get_text()
pre = str.substring(S, 0, str.pos(S, " "))
str.trim(pre)
L.set_text(str.format("{0} ({1})", pre, P))
adjust_in_kz(kz kz, bool t) =>
if t
kzBox0 = kz._box.get(0)
kzBox0.set_right(time)
newTop = math.max(kzBox0.get_top(), high)
kzBox0.set_top(newTop)
newBottom = math.min(kzBox0.get_bottom(), low)
kzBox0.set_bottom(newBottom)
kz._range_current := newTop - newBottom
if show_pivots and kz._hi_line.size() > 0
kzHiLine0 = kz._hi_line.get(0)
kzHiLine0.set_x2(time)
if high > kzHiLine0.get_y1()
kzHiLine0.set_xy1(time, high)
kzHiLine0.set_xy2(time, high)
kzLoLine0 = kz._lo_line.get(0)
kzLoLine0.set_x2(time)
if low < kzLoLine0.get_y1()
kzLoLine0.set_xy1(time, low)
kzLoLine0.set_xy2(time, low)
if show_midpoints
kzMidLine0 = kz._md_line.get(0)
kzMidLine0.set_x2(time)
kzMidLine0.set_xy1(time, math.avg(kzHiLine0.get_y2(), kzLoLine0.get_y2()))
kzMidLine0.set_xy2(time, math.avg(kzHiLine0.get_y2(), kzLoLine0.get_y2()))
if show_labels and kz._hi_label.size() > 0
if label_right
kz._hi_label.get(0).set_x(time)
kz._lo_label.get(0).set_x(time)
if high > kz._hi_label.get(0).get_y()
kz._hi_label.get(0).set_xy(time, high)
if label_price
update_price_string(kz._hi_label.get(0), high)
if low < kz._lo_label.get(0).get_y()
kz._lo_label.get(0).set_xy(time, low)
if label_price
update_price_string(kz._lo_label.get(0), low)
adjust_out_kz(kz kz, bool t, bool t_prev) =>
boxCount = kz._box.size()
if not t and boxCount > 0
if t_prev
array.unshift(kz._range_store, kz._range_current)
if kz._range_store.size() > range_avg
kz._range_store.pop()
if show_pivots and boxCount > 0
for i = 0 to boxCount - 1 by 1
if not ext_current or i == 0
kzHiValid = kz._hi_valid.get(i)
if ext_past or kzHiValid
kz._hi_line.get(i).set_x2(time)
if show_labels and label_right
kz._hi_label.get(i).set_x(time)
if kzHiValid and high > kz._hi_line.get(i).get_y1()
if use_alerts and i == 0
alert('Broke ' + kz._title + ' High', alert.freq_once_per_bar)
kz._hi_valid.set(i, false)
if show_labels and label_right
kz._hi_label.get(i).set_style(label.style_label_down)
else if use_cutoff ? t_co : false
kz._hi_valid.set(i, false)
kzLoValid = kz._lo_valid.get(i)
if ext_past or kzLoValid
kz._lo_line.get(i).set_x2(time)
if show_labels and label_right
kz._lo_label.get(i).set_x(time)
if kzLoValid and low < kz._lo_line.get(i).get_y1()
if use_alerts and i == 0
alert("Broke " + kz._title + " Low", alert.freq_once_per_bar)
kz._lo_valid.set(i, false)
if show_labels and label_right
kz._lo_label.get(i).set_style(label.style_label_up)
else if use_cutoff ? t_co : false
kz._lo_valid.set(i, false)
if show_midpoints and not t
if stop_midpoints ? kz._md_valid.get(i) : true
kz._md_line.get(i).set_x2(time)
if kz._md_valid.get(i) and low <= kz._md_line.get(i).get_y1() and high >= kz._md_line.get(i).get_y1()
kz._md_valid.set(i, false)
else
break
method manage_kz(kz_helper this) =>
kz kz = this._kz
c = this.c
string box_txt = this.box_txt
string hi_txt = this.hi_txt
string lo_txt = this.lo_txt
if tf_limit_is_equal_or_more_chart_tf
t = not na(time("", this.session, gmt_tz))
t_prev = not na(time("", this.session, gmt_tz, bars_back = 1))
if t and not t_prev
_c = get_box_color(c)
_t = get_text_color(c)
kz._box.unshift(box.new(time, high, time, low, xloc = xloc.bar_time, border_color = show_kz ? _c : na, bgcolor = show_kz ? _c : na, text = show_kz and show_kz_text ? box_txt : na, text_color = _t))
if show_pivots
kz._hi_line.unshift(line.new(time, high, time, high, xloc = xloc.bar_time, style = kzp_style, color = c, width = kzp_width))
kz._lo_line.unshift(line.new(time, low, time, low, xloc = xloc.bar_time, style = kzp_style, color = c, width = kzp_width))
if show_midpoints
kz._md_line.unshift(line.new(time, math.avg(high, low), time, math.avg(high, low), xloc = xloc.bar_time, style = kzm_style, color = c, width = kzm_width))
array.unshift(kz._md_valid, true)
array.unshift(kz._hi_valid, true)
array.unshift(kz._lo_valid, true)
if show_labels
_hi_txt = label_price ? str.format('{0} ({1})', hi_txt, high) : hi_txt
_lo_txt = label_price ? str.format('{0} ({1})', lo_txt, low) : lo_txt
if label_right
kz._hi_label.unshift(label.new(time, high, _hi_txt, xloc = xloc.bar_time, color = transparent, textcolor = txt_color, style = label.style_label_left, size = lbl_size))
kz._lo_label.unshift(label.new(time, low, _lo_txt, xloc = xloc.bar_time, color = transparent, textcolor = txt_color, style = label.style_label_left, size = lbl_size))
else
kz._hi_label.unshift(label.new(time, high, _hi_txt, xloc = xloc.bar_time, color = transparent, textcolor = txt_color, style = label.style_label_down, size = lbl_size))
kz._lo_label.unshift(label.new(time, low, _lo_txt, xloc = xloc.bar_time, color = transparent, textcolor = txt_color, style = label.style_label_up, size = lbl_size))
del_kz(kz)
adjust_in_kz(kz, t)
adjust_out_kz(kz, t, t_prev)
for in _kz
manage_kz(value)
dwm()
vlines()
hz_lines()
new_dow_time = dow_xloc == 'Midday' ? time - timeframe.in_seconds("D") / 2 * 1000 : time
new_day = dayofweek(new_dow_time, gmt_tz) != dayofweek(new_dow_time, gmt_tz)
var dow_top = dow_yloc == 'Top'
var saturday = "SATURDAY"
var sunday = "SUNDAY"
var monday = "MONDAY"
var tuesday = "TUESDAY"
var wednesday = "WEDNESDAY"
var thursday = "THURSDAY"
var friday = "FRIDAY"
plotchar(dow_labels and timeframe.isintraday and dayofweek(new_dow_time, gmt_tz) == 1 and new_day and not dow_hide_wknd, location = dow_top ? location.top : location.bottom, char = '', textcolor = txt_color, text = sunday)
plotchar(dow_labels and timeframe.isintraday and dayofweek(new_dow_time, gmt_tz) == 2 and new_day, location = dow_top ? location.top : location.bottom, char = '', textcolor = txt_color, text = monday)
plotchar(dow_labels and timeframe.isintraday and dayofweek(new_dow_time, gmt_tz) == 3 and new_day, location = dow_top ? location.top : location.bottom, char = '', textcolor = txt_color, text = tuesday)
plotchar(dow_labels and timeframe.isintraday and dayofweek(new_dow_time, gmt_tz) == 4 and new_day, location = dow_top ? location.top : location.bottom, char = '', textcolor = txt_color, text = wednesday)
plotchar(dow_labels and timeframe.isintraday and dayofweek(new_dow_time, gmt_tz) == 5 and new_day, location = dow_top ? location.top : location.bottom, char = '', textcolor = txt_color, text = thursday)
plotchar(dow_labels and timeframe.isintraday and dayofweek(new_dow_time, gmt_tz) == 6 and new_day, location = dow_top ? location.top : location.bottom, char = '', textcolor = txt_color, text = friday)
plotchar(dow_labels and timeframe.isintraday and dayofweek(new_dow_time, gmt_tz) == 7 and new_day and not dow_hide_wknd, location = dow_top ? location.top : location.bottom, char = '', textcolor = txt_color, text = saturday)
get_min_days_stored() =>
store = array.new_int()
for in _kz
int tmpStoreSize = value._kz._range_store.size()
if tmpStoreSize > 0
store.push(tmpStoreSize)
store.min()
method set_table(table tbl, kz kz, int row, string txt, bool t, color col) =>
table.cell(tbl, 0, row, txt, text_size = range_size, bgcolor = get_box_color(col), text_color = txt_color)
table.cell(tbl, 1, row, str.tostring(kz._range_current), text_size = range_size, bgcolor = t ? get_box_color(col) : na, text_color = txt_color)
if show_range_avg
table.cell(tbl, 2, row, str.tostring(kz._range_store.avg()), text_size = range_size, text_color = txt_color)
if show_range and barstate.islast
var tbl = table.new(range_pos, 10, 10, chart.bg_color, chart.fg_color, 2, chart.fg_color, 1)
table.cell(tbl, 0, 0, "Killzone", text_size = range_size, text_color = txt_color)
table.cell(tbl, 1, 0, "Range", text_size = range_size, text_color = txt_color)
if show_range_avg
table.cell(tbl, 2, 0, "Avg (" + str.tostring(get_min_days_stored()) + ")", text_size = range_size, text_color = txt_color)
for in _kz
set_table(tbl, value._kz, index + 1, value.box_txt, not na(time("", value.session, gmt_tz)), value.c)
// ---------------------------------------- Core Logic --------------------------------------------------
Indicator
ATK/DEF HTF Analysis Combo# ATK/DEF HTF Analysis Combo
ATK/DEF HTF Analysis Combo is a Higher Timeframe market environment analysis framework designed to observe the broader market structure from a use-selected timeframe.
Instead of focusing only on the active chart, this indicator uses a selected Higher Timeframe as the primary reference environment and organizes several independent market measurements into one structured dashboard.
The objective is to provide a clearer view of the **broader market direction, trend condition, momentum condition, and volatility environment** through a Higher Timeframe perspective.
The indicator is designed as an analytical observation framework rather than a conventional single-condition indicator.
## 📊 Higher Timeframe Market Environment
The core of this indicator is the use of a use-selected Higher Timeframe.
The selected timeframe becomes the reference environment for the dashboard.
For example, the user may select:
* 4 Hour
* Daily
* Weekly
* Other supported timeframes
The indicator retrieves market data from the selected timeframe and evaluates the corresponding market conditions.
This allows the active chart to be viewed in the contet of a broader market environment.
A smaller chart can contain many local price movements while the selected Higher Timeframe may still maintin a different overall structure.
The purpose of this framework is to make that broader structure visible in a compact analytical format.
# 🧭 Four-Dimensional HTF Observation
ATK/DEF HTF Analysis Combo separates the Higher Timeframe environment into four primary dimensions:
**Direction**
**Trend**
**Momentum**
**Volatility**
These dimensions are intentionally treated as independent analytical modules.
They do not represent the same characteristic of the market.
A market can have a clear directional position while momentum is neutral.
A market can have strong trend strength while volatility is relatively low.
A market can experience elevated volatility while directional structure remains mixed.
By keeping these measurements separated, the dashboard preserves more information about the current Higher Timeframe environment.
# 🎯 1. HTF Direction
The HTF Direction module evaluates the directional position of the selected Higher Timeframe.
The calculation examines the relationship between:
* HTF closing price
* EMA 8
* EMA 21
* EMA 50
* +DI
* -DI
The relationship between price and multiple EMA levels provides the primary structural classification.
The +DI and -DI relationship is then used as an additional directional component.
The module classifies the environment into several states:
* 📈 Strong Bull
* 📈 Bullish
* ↗️ Mixed Bull
* ➡️ Neutral
* ↘️ Mixed Bear
* 📉 Bearish
* 📉 Strong Bear
A Direction Score ranging from **-100 to +100** is also displayed.
The score provides a normalized representation of the directional classification used by the module.
The Direction module is not intended to represent the entire market by itself.
It describes the directional position of the selected Higher Timeframe environment.
# 📈 2. HTF Trend
The HTF Trend module examines the strength and orientation of the broader trend structure.
It uses:
* ADX
* +DI
* -DI
ADX is used to describe the strength of the prevailing directional structure, while +DI and -DI provide the directional component.
The module produces several classifications:
* 🔥 Strong Bull
* 🔥 Strong Bear
* ⚡ Bull Trend
* ⚡ Bear Trend
* 🌊 Weak Trend
* 🌀 Range
This creates a distinction between **directional position** and **trend strength**.
The Direction module asks where the market is positioned.
The Trend module asks how strongly the directional structure is expressed.
These two measurements can therefore display different conditions at the same time.
# ⚡ 3. HTF Momentum
The HTF Momentum module uses RSI to describe the current momentum condition of the selected Higher Timeframe.
The RSI range is divided into multiple states:
* 🚀 Strong Up
* ⬆️ Accelerating
* ↗️ Bullish
* ➡️ Neutral
* ↘️ Bearish
* ⬇️ Declining
* 💀 Strong Down
The purpose of this classification is to provide a more detailed view of momentum rather than reducing the entire momentum condition to a simple positive or negative value.
The module also generates a normalized Momentum Score between **-100 and +100**.
Momentum is kept independent from Direction and Trend because these characteristics can behave differently within the same market environment.
# 📊 4. HTF Volatility
The HTF Volatility module measures the relative movement environment of the selected Higher Timeframe using ATR.
The current ATR is compared with its 50-period average:
**ATR Ratio = Current ATR / Average ATR**
The result is classified into:
* 🔥 Extreme
* ⚠️ High
* 📊 Elevated
* 📊 Normal
* 😴 Low
Volatility is treated as a **non-directional measurement**.
A high volatility condition does not represent an upward or downward direction.
It describes the relative magnitude of market movement compared with its reference volatility.
This distinction allows the dashboard to separate market activity from market direction.
# 🏆 5. HTF Composite Environment
The final HTF score combines the independent Direction, Trend and Momentum scores.
The three directional components are averaged into a normalized composite value.
The Volatility condition can then modify the composite value when volatility reaches elevated levels.
The resulting score is constrained to a range between:
**-100 and +100**
The composite value is intended to provide a compact representation of the broader Higher Timeframe environment.
It does not replace the individual modules.
Instead, it provides another layer of information that can be compared with the separate Direction, Trend, Momentum and Volatility readings.
# 🔬 Independent Module Architecture
One of the main characteristics of ATK/DEF HTF Analysis Combo is its independent-module architecture.
Rather than forcing all market conditions into one calculation from the beginning, each component is evaluated separately.
### Direction
Describes the broader directional position.
### Trend
Describes the strength and orientation of the trend structure.
### Momentum
Describes the current momentum condition.
### Volatility
Describes the relative magnitude of market movement.
### Composite Environment
Provides a consolidated numerical representation of the directional modules.
This architecture allows different market characteristics to remain visible instead of hing them inside one simplified reading.
# 🌐 Broader Market Observation
The indicator is designed specifically around the idea of observing the market from a broader timeframe perspective.
The active chart represents the immediate chart environment.
The selected Higher Timeframe represents the broader reference environment.
The dashboard connects these two perspectives by displaying the selected HTF conditions directly on the active chart.
This makes it possible to examine how the current chart exists within a larger market structure.
The indicator therefore focuses on **environmental context rather than individual candle interpretation**.
# 📐 Why Higher Timeframe Data Is Used
Higher Timeframe data can provide a different structural perspective from the active chart.
For example, price movement that appears highly directional on a smaller chart may exist inside a much broader range when viewed from a larger timeframe.
Likewise, a period of relatively quiet movement on the ative chart may occur while the broader timeframe maintns a clearly defined directional structure.
The purpose of the HTF framework is to expose this broader context through a consistent set of measurements.
# 🧩 Multiple Conditions Can Coexist
The dashboard does not require every module to produce the same classification.
Different combinations are possible.
For example:
**Bullish Direction + Weak Trend + Neutral Momentum + Low Volatility**
or:
**Mixed Direction + Strong Trend + Strong Momentum + High Volatility**
or:
**Neutral Direction + Range + Neutral Momentum + Normal Volatility**
These combinations represent different market environments.
The dashboard preserves these differences instead of reducing every situation to one basic directional label.
# 📊 Scoring System
Direction, Trend and Momentum use normalized scores to represent their respective classifications.
Directional scores use a range from **-100 to +100**.
The Volatility module uses a separate non-directional scale because volatility does not inherently describe upward or downward movement.
The Composite HTF Score is normalized to remain within **-100 to +100**.
The scores are mathematical representations of the conditions defined in the script.
They should be interpreted as descriptive measurements of the selected Higher Timeframe environment.
# ⚙️ User-Defined Timeframe Configuration
The Higher Timeframe reference is **user-configurable**.
Users are expected to select and configure the timeframe that they want the dashboard to analyze.
The indicator does not assume that one particular timeframe is appropriate for every chart or every market.
Changing the HTF Resolution changes the reference environment used by the dashboard.
This is an important part of the design because the indicator is intended to allow the user to determine which broader market context should be observed.
The selected timeframe should therefore be considered part of the user's analytical configuration.
# 🖥️ Dashboard
The dashboard provides a compact display of the five main analytical sections:
### 🎯 HTF Direction
Directional classification and normalized Direction Score.
### 📈 HTF Trend
Trend classification and ADX measurement.
### ⚡ HTF Momentum
Momentum classification and RSI measurement.
### 📊 HTF Volatility
Volatility classification and ATR Ratio.
### 🏆 HTF Final Environment
Composite Higher Timeframe score and overall environmental classification.
The selected HTF resolution is also displayed in the dashboard header.
The table can be positioned on either side of the chart according to the user's preference.
# 📏 Technical Components
The indicator uses established market-data calculations including:
* EMA 8
* EMA 21
* EMA 50
* RSI 14
* ADX 14
* +DI
* -DI
* ATR 14
* 50-period average ATR
These components are processed independently before being combined into the Higher Timeframe dashboard.
The purpose of the framework is not to introduce a single new mathematical measurement, but to organize several market characteristics into a unified Higher Timeframe observation structure.
# 🧠 Analytical Concept
ATK/DEF HTF Analysis Combo approaches market observation from a broader environmental perspective.
Instead of asking only whether price is moving upward or downward, the framework separates the market into several observable characteristics:
**Where is the market positioned?**
**How strong is the directional structure?**
**What is the current momentum condition?**
**How active is the market environment?**
**How do these independent conditions relate to one another?**
This creates a multi-dimensional representation of the selected Higher Timeframe environment.
---
# ⚠️ Important Information
ATK/DEF HTF Analysis Combo is an analytical and visualization tool based on market data and mattical calculations.
The classifications and scores are generated from the relationships defined in the scrt between price, EMA, DMI, ADX, RSI and ATR.
The displayed values represent the calculated state of the selected Higher Timeframe environment at the time of observation.
They are not intended to represent certainty, probability, guarantees, or future market outcomes.
The indicator does not provide finl advice, tre instructions, or recommendations, or capital-management guidance.
The purpose of this script is to provide a structured framework for observing the broader market environment through use-selected Higher Timeframe data.
User are responsible for selecting and configuring the timeframe parameters appropriate to their own analytical requirements.
Indicator
Indicator
TDVW Momentum Levels v2TDVW Momentum Levels v2 — Volume & Trend-Confirmed Trading Zones
A precision toolkit for momentum and scalping traders that filters out noise before it reaches your chart.
📊 WHAT IT SHOWS
✅ EMA Ribbon (9/21/50/100/200) — instant trend read at a glance
✅ VWAP — the institutional benchmark line
✅ Supply & Demand Zones — confirmed, not raw pivots
✅ Volatility-Adaptive Entry, Stop, Target 1 & Target 2
✅ Clean summary table — all key levels in one glance, top-right corner
🔍 ORIGINALITY — HOW THIS DIFFERS FROM A STANDARD PIVOT/ATR SCRIPT
Most zone-detection scripts plot every raw pivot high/low, producing dozens of levels most of which are noise. This script only confirms a zone when TWO independent conditions align: (1) the pivot bar's volume exceeds its rolling average by a configurable multiplier, and (2) the zone is not counter to the current EMA trend direction (e.g. a supply zone is discarded while the market is in a confirmed uptrend). This cross-filter removes low-conviction levels that a raw pivot detector would otherwise plot.
The Entry/Stop/Target system is volatility-adaptive rather than fixed: it compares the current ATR reading against its own historical average (50-bar baseline) and scales the stop/target multipliers up or down accordingly. In a high-volatility regime, target distances automatically widen; in a quiet market, they compress. The live "Volatility×" reading in the summary table shows this factor directly.
🎯 BUILT FOR MOMENTUM & SCALPING
Designed for traders working fast-moving, low-float stocks, where fixed-percentage or fixed-ATR tools often place targets too tight (choppy markets) or too far (quiet markets) because they don't adapt to changing volatility.
⚙️ HOW TO USE
1. Add to any chart, any timeframe
2. Watch for EMA alignment (9 > 21 > 50) confirming trend direction
3. Only confirmed Supply/Demand zones (labeled "Vol+Trend Confirmed") are plotted — raw unconfirmed pivots are filtered out
4. Use the Entry/Stop/Target table for a volatility-adjusted trade plan
5. Adjust Volume Multiplier, ATR Length, and Base ATR multipliers in settings to match your risk tolerance and the instrument's typical volatility
⚠️ Educational tool only. Not financial advice. Always manage your own risk. Indicator
Indicator
Indicator
Indicator
Indicator
OminousLine EMAs (13/21/55/200)
OminousLine EMAs (13/21/55/200)
OminousLine EMAs is a clean and customizable trend-following indicator that combines four Exponential Moving Averages — EMA 13, 21, 55, and 200 — in a single chart overlay.
The indicator is designed to provide a clear visual overview of short-, medium-, and long-term market trends while keeping the chart simple and easy to read.
EMA Structure
The four default moving averages represent different layers of market momentum:
EMA 13 — Fast-moving EMA for short-term price action and momentum.
EMA 21 — Short-term trend reference that provides a slightly smoother view of price movement.
EMA 55 — Intermediate trend indicator that helps filter short-term market noise.
EMA 200 — Long-term trend reference commonly used to evaluate the broader market direction.
Trend Alignment
The relationship between the four EMAs can help visualize the current market structure.
A bullish EMA alignment may occur when:
EMA 13 > EMA 21 > EMA 55 > EMA 200
When the averages are aligned and separating upward, it can indicate increasing bullish momentum.
A bearish EMA alignment may occur when:
EMA 13 < EMA 21 < EMA 55 < EMA 200
When the averages are aligned and separating downward, it can indicate increasing bearish momentum.
When the EMAs begin moving closer together, it may indicate consolidation or weakening directional momentum.
Dynamic Support & Resistance
Moving averages can also act as dynamic reference areas during trending markets.
Price reactions around the EMA 13, 21, 55, or 200 can provide additional context when analyzing pullbacks, trend continuation, or changes in market structure.
These areas should not be considered fixed support or resistance levels.
Customization
OminousLine EMAs is fully customizable.
For each EMA, users can independently adjust:
EMA length
Visibility
Line color
Line width
Default configuration:
EMA 13 — Orange
EMA 21 — Cyan
EMA 55 — Amber
EMA 200 — Purple
The default colors are designed to provide clear visual separation, particularly on dark chart backgrounds.
How to Use
OminousLine EMAs can be used to help analyze:
Short-, medium-, and long-term trend direction
Bullish and bearish EMA alignment
Changes in momentum
EMA crossovers
EMA compression and expansion
Price interaction with moving averages
Potential dynamic support and resistance areas
The indicator can be used across different markets and timeframes. Traders can customize the EMA periods and appearance to suit their own analysis and trading methodology.
Important Notice
OminousLine EMAs is a visual trend-analysis tool and does not automatically generate buy or sell signals.
EMA alignment, crossovers, and price interactions should not be interpreted as guaranteed trading opportunities. The indicator is intended to complement other forms of technical analysis, market structure analysis, and appropriate risk management.
For informational and educational purposes only. Not financial advice. Indicator
Indicator
Indicator
Indicator
Indicator
VASA Position Size & ATR Stop vFMost blown accounts come down to one thing: size, not signal. This tool does the math the pros do before every trade. Tell it your account size and how much you're willing to risk on the trade (1% is a sane default), and it places a stop a set number of ATRs away, then tells you exactly how many units that risk budget allows.
What it does: • ATR-based stop distance, long or short • Position size from your account size and risk % • On-chart table: entry, stop, stop distance, dollar risk, units • Entry and stop lines drawn on the chart • No signals, nothing to repaint — it's a calculator
How to use: set your account size and risk % once. Pick your entry (defaults to the current close, or type one in). Read the position size off the table and use it. The idea is boring on purpose — fixed fractional risk is how you survive a losing streak long enough for your edge to show up. Plan from a closed bar so the ATR reading is settled.
Educational only — not financial advice. Position sizing does not remove market risk. Trading involves substantial risk of loss.
Indicator
Indicator
