NeuPortal - Base Rate SignalsFive standard entry rules running simultaneously on the price chart: moving average crossover, RSI reversal, MACD cross, Bollinger re-entry and Stochastic cross. Each marks its own small triangle under or over the candle, tagged with the rule that fired it. When several agree on the same bar, a consensus label is drawn.
That part is ordinary. Thousands of scripts do it.
THE NUMBER EVERY SIGNAL SCRIPT LEAVES OUT
Each rule is scored live against the base rate on your chart. The table prints three things per rule:
hit - how often that rule was followed by a move in its own direction
base - how often ANY bar was followed by that same move over the same window
edge - the difference
That difference is the only thing an entry rule can honestly claim.
A rule that hits 54% sounds like an edge until you ask what a bar picked at random scores. In a market that drifted upward over the sample, "price is higher 20 bars later" might be true 53% of the time whatever you do. A rule at 54% against a 53% baseline has found almost nothing. Every signal indicator in existence reports the 54 and omits the 53.
The edge will often be small and sometimes negative. That is the expected result, not a fault in the script. On ETHUSDT 4h at the time of writing, a WMA 21/65 crossover long scores 44.7% against a base rate of 51.1% - an edge of minus 6.4 across 123 signals and 10,026 scored bars. Buying a random bar would have been better than buying that signal.
THE CONSENSUS ROW IS AN EXPERIMENT, NOT A FEATURE
"Three indicators confirm the entry" rests on an assumption nobody checks: that three indicators are three pieces of evidence.
They are not. Measured over 19,580 four-hour bars of full Binance history, the rank correlation between these families runs around 0.80. Stochastic against Williams %R reaches 0.92; RSI against CCI 0.90. For n readings correlated at r, the effective number of independent readings is about n / (1 + (n - 1) * r). Five rules at 0.80 come to roughly 1.4.
So set how many rules must agree, and watch what happens. If agreement were evidence, the edge would rise as the threshold rises. Usually only the signal count falls. Trading less often for the same expectation is not an improvement, and this is the first indicator I know of that lets you see that rather than assume it.
TIMING
Three modes. Confirmed waits for the bar to close and never changes afterwards. Anticipate fires one bar earlier by projecting each rule's spread across zero, so some of those crosses never happen. Live fires on the unfinished bar and repaints.
Switch between them and watch the edge column. Earlier is only better if the edge improves, and usually it does not. Note that in Live mode the historical percentages were not earned under those conditions - history contains no unfinished bars, so every past signal was scored as confirmed. Live mode flatters itself, and the table marks it.
HOW THE SCORING WORKS
A signal counts as correct if price closed higher (long) or lower (short) a fixed number of bars later. Every count uses only bars that had already completed when the label was drawn, so nothing repaints and no percentage knows anything the chart did not. Early in a chart the sample is tiny and the table says "too few" rather than printing a flattering number from six observations.
WHAT THIS IS NOT
Not a strategy and not advice. Hit rate says nothing about the size of wins against losses: a rule right 60% of the time can lose money steadily. This measures direction only, over one fixed horizon, with no costs, no slippage and no position sizing.
It is a tool for finding out whether a familiar rule does anything at all on your instrument. The usual answer is very little, and knowing that is worth more than another arrow.
Indicator
Indicator
NeuPortal - Confluence MeterThe standard oscillator set on one shared 0-100 scale: RSI, Stochastic, Williams %R, CCI, MFI, MACD histogram and Momentum. Toggle any of them, read them against each other, and get a consensus line.
That part is ordinary. Here is the part that is not.
WHY CONFLUENCE IS USUALLY WORTH LESS THAN IT LOOKS
"Five indicators confirm the signal" is the oldest line in technical analysis, and it is mostly a restatement of one thing said five times. These oscillators are near-transformations of each other.
Measured over 19,580 four-hour bars of full Binance history on BTCUSDT, the rank correlations are: Stochastic to Williams %R 0.92, RSI to CCI 0.90, Stochastic to CCI 0.89, Williams %R to CCI 0.87. The median pairwise correlation across all 21 combinations is 0.80. ETHUSDT over the same span reproduces the table to two decimal places.
For n readings with average correlation r, the effective number of INDEPENDENT readings is about n / (1 + (n - 1) * r). Seven oscillators at 0.80 come to roughly 1.2.
Seven agreeing indicators is one indicator, counted seven times.
The weakest pair in the set is RSI against the MACD histogram at 0.51. If you want two oscillators rather than seven, those two carry the most different information.
WHAT THE SCRIPT DOES ABOUT IT
It does not take the numbers above on trust. It measures the correlation live, on your symbol, your timeframe and your chosen lengths, then prints two things side by side in the table:
- agreement, the count of enabled oscillators on the same side of 50
- effective independent readings, derived from the measured correlation
The first is what people want to see. The second tells them what it is worth. When the second reads 1.3, a unanimous seven-to-nothing agreement is not seven pieces of evidence.
HOW THE SHARED SCALE WORKS
RSI, Stochastic and MFI are natively 0-100. Williams %R is shifted from its -100..0 range. CCI, the MACD histogram and Momentum have no fixed bounds, so they are converted with a percentile rank against their own recent history: the reading becomes where this value sits relative to how this instrument has behaved lately.
That is a real transformation and it is disclosed rather than buried. A percentile-ranked MACD histogram is not the MACD histogram, so the raw value is printed in the table alongside the scaled one. Nothing is hidden behind the normalisation.
SETTINGS WORTH KNOWING
Percentile lookback controls how much history the unbounded oscillators are ranked against. Shorter reacts faster and is noisier. Longer is steadier and slower to acknowledge a change in regime.
Correlation window controls how much history is used to measure independence. Longer is more stable but averages across regimes, and correlation between oscillators is not constant.
WHAT THIS IS NOT
Not a strategy, not a signal, not a recommendation. An oscillator crossing 50 is not an entry. The two alerts are deliberately descriptive rather than directional, because an alert that said "buy" would contradict everything the script exists to point out.
Free and open source. Read the code, change the lengths, run it on your own instruments and see whether the correlation on your market matches ours.
Indicator
Indicator
All-In-One Trader Toolkit# All-In-One Trader Toolkit (AIO Toolkit)
A comprehensive overlay indicator that combines the key tools intraday futures traders need into a single script. Designed for ES, NQ, and other futures instruments with all sessions anchored to New York (Eastern) time.
## Features
**Supply & Demand Zones**
Auto-detected zones scored 1–10 based on impulse strength vs. basing range. Zones auto-extend until price closes through them (or use a fixed bar width). Filter by minimum score to show only the strongest levels. Fully customizable colors.
**Previous Day High/Low (PDH/PDL)**
Automatically plots the prior trading day's high and low as dashed reference lines. Configurable number of days to keep on chart.
**Pre-Market High/Low (PMH/PML)**
Captures the high and low of the overnight/globex session. Default session is 6:00 PM – 9:30 AM ET (full globex), adjustable to any window (e.g. 4:00 AM – 9:30 AM for London open only).
**15-Minute Opening Range Breakout (ORB)**
Plots the 9:30–9:45 AM ET opening range high/low. Generates BUY/SELL signals on breakout retests. Includes three configurable take-profit levels with optional symbol-specific points for NQ and ES.
**Daily VWAP + ±1 Standard Deviation Bands**
Manually calculated VWAP with upper and lower bands, resetting each trading day.
**NY-Open Anchored VWAP + ±1 Standard Deviation Bands**
Session-only VWAP anchored to the 9:30 AM NY open. Plots only during the 9:30–4:00 PM session with no carryover lines between sessions.
**Initial Balance (IB) + Extensions**
Captures the first 60 minutes of the NY session (9:30–10:30 AM ET). Plots IB High/Low with 50% and 100% extensions in both directions.
**News / Event Markers**
Up to 3 configurable event markers with custom labels and timestamps. Draws vertical dashed lines at the specified times.
**Dual EMA**
Two independent EMAs with adjustable length, color, and line width. Defaults: 8 EMA and 200 EMA.
## Display
- All labels are pinned to the right edge of the chart for easy identification
- Global label size control (tiny / small / normal / large / huge) applies to all elements
- Every feature can be toggled on/off independently
- All colors are fully customizable through the settings panel
## Alerts
Built-in alert conditions for ORB breakouts (up/down) and retest buy/sell signals.
## Best Used On
Intraday futures charts (1-min, 2-min, 5-min) for instruments like NQ, ES, YM, RTY. Works on any symbol but session times are optimized for US equity futures. Indicator
SEB-Dual-time-period EMA smoothing standard error band-zrbb-1. Gauging Trend Strength
The width of Standard Error Bands directly reflects the health of a trend:
Contracting Bands: When price is trending and the Standard Error Bands continue to narrow, it indicates that price is closely following the regression trendline, suggesting strong trend momentum and a likely continuation in the same direction.
Expanding Bands: When the Standard Error Bands begin to expand, it means price is deviating further from the regression trendline, signaling that the trend may be nearing its end and the market could enter consolidation or reverse.
2. Identifying Low-Volatility Conditions and Breakout Precursors
Similar to the "Squeeze" logic of Bollinger Bands, when Standard Error Bands narrow significantly, it often foreshadows an imminent expansion in volatility. Traders can treat this as an early warning signal for a potential breakout or the start of a significant price move.
3. Warning of Trend Reversals and Consolidation
The expansion of Standard Error Bands itself does not directly provide buy or sell signals, but it offers a statistical indication of trend exhaustion:
Band Expansion → Decreasing "cohesion" of the existing trend
Combined with price patterns, volume, or other momentum indicators (such as RSI, MACD), it can help determine whether a reversal or sideways consolidation is likely.
4. Comparative Application with Other Channel Indicators
Within the technical analysis framework, Standard Error Bands are often used in conjunction with Bollinger Bands, Keltner Channels, Donchian Channels, and others. Compared to Bollinger Bands, which are more sensitive to short-term price spikes, Standard Error Bands—being based on linear regression—provide a more robust depiction of trend direction and tend to generate fewer false signals in clearly trending markets.
1. 判断趋势强度
标准误差带的宽窄变化直接反映趋势的健康程度：
带收窄（Contracting）：当价格处于趋势中，而标准误差带持续收窄，说明价格紧密跟随回归趋势线，趋势动能较强，可能继续沿原方向运行。
带扩张（Expanding）：当标准误差带开始扩张，意味着价格偏离回归趋势线的程度加大，趋势可能即将结束，市场可能进入盘整或发生反转。
2. 识别低波动与突破前兆
与布林带的"挤压"（Squeeze）逻辑类似，标准误差带在极度收窄时，往往预示着波动性即将放大。交易者可将其视为潜在突破或大幅行情启动的早期预警信号。
3. 趋势反转与盘整预警
标准误差带扩张本身并不直接给出买卖方向，但它提供了一个趋势衰竭的统计信号：
带扩张 → 原有趋势的"凝聚力"下降
结合价格形态、成交量或其他动量指标（如 RSI、MACD），可辅助判断是反转还是横盘整理
4. 与其他通道指标的对比应用
在技术分析体系中，标准误差带常与布林带、凯尔特纳通道（Keltner Channels）、唐奇安通道（Donchian Channels）等配合使用。相比布林带对短期价格尖峰更敏感，标准误差带由于基于线性回归，对趋势方向的刻画更为稳健，在趋势明确的市场中假信号相对较少。
Indicator
Asian Range Liquidity Sweep - Kill Zone ReversalASIAN RANGE LIQUIDITY SWEEP — the complete ICT Asian Range liquidity model in one indicator
The Asia session builds a small, quiet range. London opens, runs the stops sitting above or below that range, and then walks the price the other way. That single move is one of the most repeatable things in FX, and this indicator is the full rule set for it: the range, the liquidity raid, the higher-timeframe point of interest that makes the raid tradeable, the entry, the stop, the targets — and, just as important, the days on which the raid will NOT happen.
Everything is drawn in New York time, the way the model is defined.
━━━ WHAT IT DOES ━━━
① ASIAN RANGE (20:00 – 00:00 New York)
A time based range, not a structural one. The box, its high, its low and its 50 % are projected forward into the whole trading day. The high is buy side liquidity, the low is sell side liquidity. Direction is mechanical and never inverts: above the range this model only sells, below the range it only buys.
② HIGHER TIMEFRAME POI ENGINE — the filter that decides everything
A raid of the Asian high on its own is, most of the time, a trap. The raid only becomes high probability when it lands inside a higher-timeframe point of interest. The indicator scans three timeframes at once (15m / 1h / 4h by default) for
· Fair Value Gaps
· Order Blocks
· Breaker Blocks (a demand block that price closed through and that now acts as resistance)
· Inverse Fair Value Gaps (a bullish gap that got closed through and flipped bearish)
Every zone is anchored to the exact candles that built it, is extended while it is alive, and is dropped once it is used up or once it sits too far from the daily range to matter. On top of that, the higher-timeframe structure itself has to agree: bearish structure for shorts, bullish for longs.
③ LONDON KILL ZONE (02:00 – 05:00, optional 01:30 start) — Trade 1
Between those hours the indicator waits for price to raid the Asian high (or low) INTO one of those zones. A raid is not even accepted as valid until price has traded back into a fair value gap. Then it waits for a lower-timeframe confirmation and enters at a point of interest — never at market:
· MSS + FVG — market structure shift, entry on the retracement into the gap
· CISD — change in state of delivery, entry back at the CISD level itself
· FVG tap — proximal edge on small gaps, 50 % on big ones
· HIDDEN ORDER BLOCK — the opposite-colour candle trapped between two same-direction fair value gaps. The block almost nobody marks, and the sharpest entry in the whole model
That list is a risk ladder: 1m MSS+FVG is the most aggressive and pays the most, 15m FVG is the safest, wins most often and pays the least. Pick the timeframe you actually want to trade and run the indicator there.
Stop goes on the protective structure that belongs to the entry zone. Target 1 is always the opposite side of the Asian range. Target 2 extends to the next inducement swing — the draw for the day.
④ NEW YORK KILL ZONE (07:00 – 10:00) — Trade 2, the continuation
When the London raid then breaks the OPPOSITE side of the Asian range with displacement, the London extreme is very likely the high or the low of the day. The indicator draws the optimal trade entry fibonacci over that impulse — 0.5 / 0.618 / 0.705 / 0.79 — and takes the continuation from the retracement into it, with the stop beyond 0.79 or 1.0. The setup is strongest when the origin zone was a 4h zone, because the whole day is then a 4h market-maker model running internal to external. If the draw on liquidity was already reached before New York opens, the day is flagged as low probability and skipped.
⑤ THE NO-SWEEP FILTERS — the part almost nobody explains
Two situations mean the raid you are waiting for will never come:
· HTF POI ALREADY TAPPED IN ASIA — price worked into the zone during the Asian session and then broke structure against the range. The Asian high is now protected. The indicator says so on the chart and points you at the fallbacks instead: the 50 % of the range, an internal range high (trend line liquidity), or a fair value gap built inside the Asian session.
· STRONG HIGH / STRONG LOW INSIDE THE RANGE — a sweep immediately followed by a break of structure. That extreme is protected. What looks like equal highs later on is a rejection-block reversal, not a raid. Wait for the sweep and you miss the trade.
⑥ NEWS FILTER
High-impact US news in the New York session turns London into a range or a one-way run with no reversal. Pine cannot read a news feed, so paste the dates and those days are skipped.
━━━ WHY EVERY SIGNAL EXPLAINS ITSELF ━━━
Hover any signal pill and you get the full reasoning, not a label:
the range and its size, the exact price the liquidity was raided at, which point of interest it landed in, what the higher timeframe structure was doing, which confirmation fired, whether the raid was validated by a fair value gap, plus entry, stop, both targets, risk in pips, reward in pips and the R multiple.
Setups that were found but rejected are explained too. A "NO TRADE" tag tells you the raid, the zone and the confirmation were all there but the reward did not pay for the stop — so you learn the filter instead of wondering why nothing fired.
Every zone, every structure event, the range lines, the OTE levels and both education cards carry the same kind of tooltip. There is a HOW TO READ THIS card and an honest BEFORE YOU TRADE THIS card on the chart.
━━━ COCKPIT PANEL ━━━
Live session state, symbol, chart timeframe, higher-timeframe bias, the full Asian range with a PROTECTED / OPEN flag on each side, an eight-step checklist that fills in as the setup builds, the open position with stop and target, a large status line, a rough win / loss / break-even tracker and the timestamp of the last signal.
━━━ ALERTS AND AUTOMATION ━━━
Every event fires a clean JSON payload ready for a webhook — entry, stop, both targets, the range boundaries, the point of interest that produced the signal, symbol, exchange, timeframe, volume and an optional account field. Events: ENTRY, TP1, SL, BE, SWEEP, RANGE. Five plain-language alertconditions are included as well for anybody who just wants a notification.
━━━ SETTINGS WORTH KNOWING ━━━
· Sessions are fully configurable if your broker feed needs a different reference
· Turn individual POI types and POI timeframes on and off
· Choose one confirmation model or let it take the first valid trigger
· Four stop modes, two-target management, break-even at a chosen R
· Full chart theme with navy background, mint / red candles and session shading — or switch it off and keep your own
━━━ HONEST NOTES ━━━
This model is mechanical up to the trigger. Direction is fixed and never inverts, the windows are fixed, the filters are fixed — but the final judgement, is this really the high of the session, stays discretionary. Anybody telling you a setup is 100 % mechanical is selling you something.
Expect zero to four setups a day across two pairs, roughly 20 pips average per trade, and losing days. Judge it weekly and monthly, never daily. The safest entry model fires rarely by design; the aggressive ones fire more and stop out more.
The win / loss counter in the panel is a rough on-chart tracker that assumes a fill at the marked price and resolves target before stop within the same bar. It is not a backtest and it is not a performance claim.
This indicator is a study tool. It is not financial advice.
━━━ CREDIT ━━━
The rule set follows the well-known ICT Asian-sweep model as it is taught publicly in the ICT community. The implementation, the point-of-interest engine, the no-sweep filters, the panel and the design are original work.
Open source — read it, change it, learn from it.
WHY THESE PARTS BELONG TOGETHER
The session range, the higher-timeframe point of interest and the lower-timeframe confirmation form
a single filter chain, and the model does not work with any link missing. The range supplies the
liquidity pool that is going to be raided, the higher-timeframe zone decides whether that raid is a
reversal or a trap, and the lower-timeframe trigger decides when. A raid without a zone is noise,
a zone without a raid has nothing to react to, and both without a trigger have no entry.
Indicator
Liquidity Heatmap 3D - Volume Density POC CVDLIQUIDITY HEATMAP 3D — the order-flow heatmap look, rebuilt for PulseWire.
This indicator brings the volume-density heatmap visual to any PulseWire chart, with a twist no other heatmap here has: a real 3D relief shader. Instead of flat colour tiles, every cell is lit by a virtual light source (emboss lighting computed in the colour math), and the strongest liquidity walls extrude as 3D blocks with shaded side faces and lit top caps.
━━━ HOW IT WORKS ━━━
PulseWire provides no order book and no historical tick data, so this is an honest volume-density heatmap: each bar's volume is distributed across the price zones its range covered. Dense zones are the liquidity walls where the market actually spent volume. The engine normalises against the 85th percentile of the column maxima, so one hot spike never blanks out the rest of the map.
━━━ WHAT IS ON THE CHART ━━━
· Heatmap grid up to 22 x 28 zones, rebuilt live on every bar
· 3D RELIEF SHADER — emboss lighting, specular glints on the wall tops, adjustable strength
· 3D WALL EXTRUSION — the strongest cells pop out as shaded blocks (toggle)
· 7 PALETTES — GOLD 3D (default), TWILIGHT, FIRE & ICE (buy/sell split), OCEAN, INFERNO, EMERALD, MONO
· POC LINE — the highest-volume price of the window, with its volume readout
· WALL DETECTION — the two strongest active liquidity walls, labelled with their strength in percent
· VOLUME PROFILE — profile bars on the right, POC highlighted in gold
· TRADE BUBBLES — volume-spike bubbles sized by their ratio against the average, buy blue / sell magenta
· CVD STRIP — cumulative volume delta (bar proxy) along the bottom, mint and red
· COCKPIT PANEL — engine checklist, POC box and a BUY / SELL flow signal line
· Optional dark chart theme: navy background with mint / red bars
━━━ HOW TO USE IT ━━━
1. Watch the golden walls: price often reacts at dense volume zones — support and resistance built by traded volume rather than by drawn lines.
2. The POC is the fairest price of the window and acts as a mean-reversion magnet in ranges.
3. CVD rising while price holds a wall below it is an absorption long idea; CVD falling at a wall above is a distribution short idea.
4. Bubbles mark the bars where outsized volume hit. Combine them with wall touches for confluence.
━━━ SETTINGS ━━━
Grid size, bars per column, cutoff, gamma, tile transparency, relief strength, wall threshold and bubble threshold are all adjustable. Works on every symbol and timeframe; if a symbol carries no volume the engine falls back to time-at-price density and says so in the panel.
━━━ HONEST LIMITS ━━━
This is not level-2 order book data — PulseWire does not provide it. The map shows where volume actually traded, not resting limit orders. The 3D effect is a rendering technique, not extra data.
━━━ NOTE ON LOADING ━━━
Right after adding the indicator, or after changing a setting, give it a few seconds: the engine creates its object pools and runs the first build. A brief flicker during that warm-up is normal and stops once the first refresh is done. After that the persistent engine updates in place with no flicker.
Open source — read it, change it, learn from it. This indicator is a study tool, not financial advice.
WHY THESE PARTS BELONG TOGETHER
The heatmap, the point of control and the cumulative delta strip are three views of one question:
where is volume sitting, which price is defending it, and who is doing the trading. The heatmap
shows the distribution, the point of control marks its centre of gravity, and the delta strip says
whether that distribution is being built by buyers or sellers. Read on their own each of the three
is ambiguous; read together they describe one order-flow picture.
Indicator
Indicator
Market Profile VPOC Breakout - Imbalance SignalsA breakout setup does not fail because the setup is bad. It fails because it was taken in the wrong market phase. Roughly 70 % of the time price is INSIDE the higher-timeframe balance — inside fair value — and there a breakout has almost no edge. In the remaining ~30 %, when the market is OUT OF BALANCE, the identical trigger becomes one of the highest-probability trades there is. That combination shows up about ONCE PER DAY.
Market Profile VPOC Breakout automates that location-first workflow end to end: weekly and daily volume/TPO profiles, the value areas, the VPOC sequence, the transferred prior-day value-area edge, single prints, the P / b micro-profile proof, the entry trigger, the risk model and ready-to-use webhook JSON — all on one chart, with an explanation attached to every single object.
═══════════════════════════════
THE 7 CONFIRMATIONS
═══════════════════════════════
The panel walks you through them live, top to bottom, and nothing below step 1 matters while the market is in balance.
① WEEKLY LOCATION — the previous week's value area is the equilibrium. Price inside it = the 70 % phase → stand down. Price above VAH or below VAL = imbalance → hunt. The shaded zone on the chart is that balance; the background wash tells you at a glance which phase you are in (mint = imbalance up, red = imbalance down, gold = balance).
② EQUILIBRIUM TEST + REJECTION — the week opened outside the balance, price came back to TEST the weekly value area and was aggressively traded away from it again. That rejection is the proof that the market no longer wants to be in equilibrium.
③ TREND OF EQUILIBRIUM — the sequence of daily VPOCs. Rising VPOCs mean fair value itself is migrating up: the distribution of the participants' equilibrium is trending, which is exactly what a fast trade WITH the trend needs. Flat or overlapping VPOCs = balance = no trade. Drawn as a staircase over the session VPOCs.
④ PRIOR-DAY VALUE AREA BREAK — the previous session's value-area edge is transferred onto the execution timeframe as a thick green line. Price has to ACCELERATE through it, not drift.
⑤ SINGLE PRINTS — the indicator reads the running session's TPO grid and counts price rows that only ONE bar ever touched. Those rows are marked as a cyan SINGLE PRINT zone: the market moved so fast that no business was done there = aggressive buyers or sellers, not passive rotation.
⑥ P / b MICRO SHAPE — the micro profile of impulse + the small balance that forms on it is measured. POC in the upper part = P (aggressive buyers shifting equilibrium up) → long. POC in the lower part = b (sellers shifting it down) → short. A symmetric D is skipped. This is the P/b/D profile-shape logic used by two-time World Cup Championship of Futures Trading winner Patrick Nill.
⑦ TRIGGER — two variants, both switchable:
• BREAK-IN — price dips back into the P/b balance and is instantly bought / sold again (the aggressive, earlier entry, trend-continuing).
• BREAKOUT — a CLOSE beyond the balance edge with a higher (long) or lower (short) close. Never a wick.
═══════════════════════════════
RISK MODEL
═══════════════════════════════
Stop behind the structural invalidation (micro-balance edge, impulse origin or the reference level) plus an ATR buffer. TP1 in R multiples moves the stop to break-even, TP2 lets the runner work. And the rule that keeps this model alive: a TIME STOP. If the move does not run within N bars, get out — a failing breakout reverses just as fast as it was supposed to run. Risk and reward are drawn as blocks so the geometry is readable at a glance. One signal per session by default, because the model only exists about once a day.
═══════════════════════════════
WHAT IS ON THE CHART
═══════════════════════════════
• Session volume/TPO profiles with value area, VPOC and shape letter (P / b / D)
• Naked VPOC rays that keep running right as magnets
• Weekly profile + the prior-week balance zone projected into the current week
• The thick green transferred value-area edge with its own explanation
• Daily VPOC staircase and the imbalance gauge in the panel
• Single-print zones, micro-balance boxes with the big P / b letter
• BUY / SELL pills, the full numbered reason stack printed next to the signal, entry / SL / TP1 / TP2 rails, risk and reward blocks, TP / SL / BE / TIME exit tags
• A permanent BEGINNER CARD on the chart plus a HOW TO READ manual — every pill, zone, rail, letter and panel row also has its own hover explanation, so nothing on this chart is unexplained
• Two colour modes: Design (navy, mint / cyan / gold) or Original TPO (the classic grey market-profile look with red VPOC rays and a white profile curve)
═══════════════════════════════
AUTOMATION
═══════════════════════════════
Create ONE alert with the condition "Any alert() function call" and paste your webhook URL. Every BUY, SELL, TP1_HIT, TP2_HIT, SL_HIT, BE_EXIT, TIME_STOP and ARMED event posts ready-to-use JSON containing id, symbol, action, setup, shape, qty, price, entry, sl, tp1, tp2, pdvah, pdval, timeframe and time — connect it to any bridge or bot without touching the code. Separate alertconditions for BUY, SELL and "any signal" are also available.
═══════════════════════════════
HOW TO USE IT
═══════════════════════════════
Built for an intraday execution timeframe: 1m to 15m, exactly like the original workflow (locate on the weekly and daily profiles, execute on a 1-minute chart). Index futures and index CFDs are the natural home (NQ, ES, DAX, Nikkei), but the profile engine derives its bin size from the average daily range, so gold, FX and crypto work out of the box. For index futures switch on "cash session only" and set the exchange session so the overnight trade does not smear the profiles.
Every input is documented with a tooltip that explains what it does and why it exists. Start with the defaults, then loosen step 2 or step 3 if you want more signals — and be aware that every filter you switch off moves you back towards the 70 % phase where this trigger simply does not pay.
═══════════════════════════════
NOTES
═══════════════════════════════
The entry logic is mechanical and reproducible. Stop distances, targets and the time stop are parameters, not gospel: size them to the instrument you trade. Profiles are built from the bars of the chart you are on, so a finer timeframe gives a finer profile. Hit rates quoted in the educational material behind this model refer to the full workflow including discretionary session context — treat the signals as a structured, disciplined framework, not a guarantee, and always validate on your own data before risking capital.
Open source. Feedback and improvement ideas are welcome.
WHY THESE PARTS BELONG TOGETHER
The point of control and the breakout trigger are combined because a breakout setup does not fail
because the setup is bad, it fails because it was taken in the wrong market phase. The VPOC locates
that phase: a break away from a freshly built point of control is a different trade from a break
back into an old one. The imbalance measurement is the third piece - it tells you whether the move
away from the VPOC was one-sided enough to be worth following.
Indicator
Volume Profile P b D Shapes - Day PlaybookVOLUME PROFILE P b D SHAPES reads the market's body language: every trading day the volume profile prints a LETTER — P, b or D — and that letter tells you who is in control and exactly how to trade the next session. This indicator automates the complete PbD method: it builds every day's volume profile, classifies the shape, draws the levels, prints the playbook on your chart and fires webhook-ready JSON signals.
■ THE THREE LETTERS
P-SHAPE (bullish continuation) — fast impulse UP, then balance ON TOP. The thin tail below is single prints: nobody did business there. Buyers feel like winners, dips are for buying.
b-SHAPE (bearish continuation) — fast impulse DOWN, then balance AT THE BOTTOM. The thin tail above marks the drop. Sellers are in control, rallies are for selling.
D-SHAPE (balance day) — a symmetric bell curve with a fat POC in the middle. Buyers AND sellers are happy, fair price has been found. The next day usually stays range-bound: fade the edges.
■ THE AUTOMATED PLAYBOOK (7 SETUPS)
P behind you:
- PLAN A — CONTINUATION: price dips into yesterday's value area, the dip HOLDS (no low break), a reclaim candle closes back at/above the POC -> BUY. Targets: previous high, then a measured balance move.
- PLAN B — FAILURE = FULL TRAVERSE: 2+ candle CLOSES below the VAL (a wick is NOT enough) plus a volume spike = acceptance below balance. The shape has failed and price tends to walk the WHOLE way back to the impulse origin -> SELL.
b behind you: the exact mirror — sell failed rallies into value (Plan A), or buy the failure traverse when 2+ closes above VAH with volume appear (Plan B).
D behind you + today opens INSIDE the D:
- Range rules. Short the Value Area High rejection, long the Value Area Low rejection, target the POC first and the opposite edge second. The FIRST touch gives the best response — the fade counter limits how often each edge may be traded.
■ WHAT YOU SEE ON THE CHART
- A volume histogram for every completed day, colored by its letter (mint P / red b / gold D), POC row highlighted
- A big P / b / D letter above each day — hover it for the full lesson behind the shape
- Yesterday's VAH / VAL / POC projected into today as live rails with explanatory tooltips
- A bias note at every day open: which letter is behind you, where today opened, and both plans
- Two-line BUY/SELL pills that explain WHY the signal fired (hover for the complete reasoning + Entry/SL/TP1/TP2)
- Entry / SL / TP1 / TP2 lines, TP1 -> break-even management, TP2 runner
■ AUTOMATION / WEBHOOK
Create one alert with condition "Any alert() function call" and paste your webhook URL. Every BUY/SELL/TP1/TP2/SL/BE event sends ready-to-use JSON: id, symbol, action, setup, shape, entry, sl, tp1, tp2, timeframe, time. There is also an optional end-of-day SHAPE alert so your bot can pick tomorrow's playbook automatically.
■ HOW TO USE
1) Apply to an intraday chart (5m - 1h; crypto, indices, FX, stocks). 2) Let at least one full day close so the first letter prints. 3) Read the panel: previous-day letter -> today's bias -> checklist. 4) Take the pills or automate them via webhook. The first day on the chart only collects data — letters start from day two.
Educational note: shapes give a BIAS, not a guarantee — that is exactly why every setup ships with both Plan A and Plan B. Not financial advice.
WHY THESE PARTS BELONG TOGETHER
The volume profile and the shape classification are inseparable here. The profile alone tells you
where volume accumulated; the classification into P, b and D shapes is what turns that distribution
into a statement about who is trapped and where the day is likely to go. A P shape and a b shape can
contain identical volume and mean the opposite thing - which is only visible once the profile is
read as a letter rather than as a histogram.
Indicator
Impulse Box Breakout Engine - Origin Range Buy Sell SignalsIMPULSE BOX BREAKOUT ENGINE — a complete breakout trading system in one indicator: self-adjusting impulse boxes with entry arrow, stop, two fixed targets, a pink trailing-stop dot line and webhook automation. Rebuilt 1:1 from a professional German "Impulsbox" breakout engine (72-minute source webinar, analyzed frame by frame) and redesigned as a modern cockpit indicator.
█ WHAT IT DOES
The engine meters the market N bars back: the range the market traded in PLUS the length of every single bar inside it (compression check). When a STRONG impulse bar closes outside that range, the IMPULSE BOX appears over the consolidation:
• CYAN BOX = long breakout — big entry arrow inside the box
• GOLD BOX = short breakout — mirrored to the downside
• Initial stop = the far side of the box (bottom for longs, top for shorts)
• TARGET 1 + TARGET 2 (violet marks) are projected from the box height the moment the box appears — FIXED, never repainted, never moved afterwards
• PINK DOTS = the trailing stop. It starts at the box edge and follows price with ~30% of the move as breathing room. It only ratchets in your favor — never back
• At Target 1 the stop jumps to break-even or better. After Target 2 the system follows the source rule: "never leave the market voluntarily — let the stop take you out"
█ SELF-OPTIMIZING ENGINE
Markets are sideways ~80% of the time — rigid breakout parameters fail there. This engine adapts automatically:
• TREND regime (ADX based): short lookback, wider targets (+35% / +100% of box height)
• RANGE regime: longer lookback, stricter impulse filter, closer targets (+25% / +75%)
• AUTO-RECALIBRATION: after a false breakout the impulse threshold is raised temporarily — fewer but cleaner boxes. A winning box resets it
• The cockpit shows the current regime, calibration and effective parameters at all times
█ HONEST LIVE STATISTICS
The cockpit counts every box on your chart and shows the real Target-1 and Target-2 hit rates — no marketing numbers, live counted on your symbol and timeframe. On XAUUSD 15m the default engine printed 500+ boxes with a T1 hit rate above 90% at the time of publishing (past performance never guarantees future results).
█ DIRECTION BIAS FILTER
The #1 rule of the source system: trade boxes only in the direction of the higher-level move. The indicator automates this via EMA-200 + Supertrend bias. Choose: Off / Mark counter-bias boxes (dimmed + warning) / Filter them out completely. Supertrend companion arrows are included as extra confluence.
█ EVERY SIGNAL EXPLAINS ITSELF
Hover any BUY/SELL pill: how many bars of consolidation, how strong the impulse bar was (x average bar), which range edge broke, which regime the engine was in, whether the box agrees with the bias — plus entry, stop and both targets. No black box.
█ WEBHOOK AUTOMATION (BOTS / BRIDGES)
Create ONE alert with "Any alert() function call" and your webhook URL. The indicator fires ready-to-use JSON on BUY, SELL, T1_HIT, T2_HIT, TRAIL_EXIT and SL_HIT — including entry, stop, both targets, box levels, regime and live hit rates. Works with any webhook bridge, bot or auto-trader.
█ HOW TO USE
1) Add to chart — works on ALL symbols and ALL timeframes (crypto, gold, forex, indices, stocks)
2) Use standard candles or OHLC bars (Heikin-Ashi smoothing swallows breakouts — a key finding of the source webinar)
3) Wait for a box + arrow, entry at the breakout close, stop at the far box edge
4) Take partial profit at Target 1, let the rest run with the pink trailing dots
5) Automate via webhook JSON if you want
█ SETTINGS
Everything is configurable: manual mode with fixed lookback/impulse strength, target distances, trailing gap, exit-at-T2 mode, bias filter mode, Supertrend, chart theme, cockpit position and all alert toggles.
Educational tool only — not financial advice. Trading involves substantial risk. Always test on a demo account first and never risk money you cannot afford to lose.
WHY THESE PARTS BELONG TOGETHER
The impulse detection and the box are one mechanism, not two features. The impulse identifies the
candle sequence that moved the market; the box freezes the range that impulse came out of, because
that range is the level the market has to defend for the move to continue. Detecting impulses
without marking their origin gives you a signal with no invalidation, and drawing boxes without an
impulse gives you consolidation zones with no direction.
Indicator
Indicator
Indicator
Previous Day / Week / Month Range LevelsDraws the high, low and internal subdivisions of the last completed period on up to three higher timeframes at once.
Why the prior range matters
A finished period leaves behind a structure the market keeps referring back to. Yesterday's high and low are where yesterday's argument was settled, and price spends a surprising amount of the next session negotiating with those two numbers — breaking them, failing at them, or holding between them.
The subdivisions add resolution to that. The midpoint separates the upper and lower half of the range, and which side price accepts on tells you who won the period. The quarters mark the shallow zones inside each half — the levels a pullback reaches before it has retraced anything meaningful.
What it draws
Prior period high and low, as solid boundary lines
Midpoint at 50%
Quarters at 25% and 75%
Optional eighths at 12.5% and 87.5% for wider ranges
Price labels on every level, with the timeframe named
Three timeframe slots, each with its own colour and on/off switch. Defaults are Daily and Weekly enabled, Monthly available. Any timeframe works — 4H, quarterly, yearly — so intraday traders and swing traders can both configure it sensibly.
The levels do not repaint
Each level is read from the previous completed bar of its timeframe using a lookahead-safe request. Once a period closes, its levels are fixed and will not move. Nothing is recalculated on the developing bar, and nothing you see on historical bars was drawn with information from the future.
That means the numbers are frozen for the whole current period. The daily levels you see at the open are the same ones at the close.
Notes on use
Session settings matter. On a chart set to regular hours, the daily range is built from regular-hours prices only — switch to extended hours and every level moves. Neither is wrong, but be deliberate about which one you're reading.
Multi-period timeframes such as 2W or 6M are grouped by PulseWire from a fixed reference point, which may not align with where you'd assume a fortnight begins. Worth eyeballing directly before relying on them.
Drawings are anchored by timestamp rather than bar index, so they stay put when you scroll back and PulseWire loads more history. Bar indices renumber every time more history loads; timestamps do not.
There is also a fully transparent plot of close in there, doing a job that is easy to miss. Lines and labels do not feed PulseWire's autoscale, so a script that only draws has no price range of its own and can be handed a separate price scale — at which point every level sits at an offset from the candles. The transparent plot gives the script a real range and locks it to the symbol's.
Settings
Three timeframe slots, each with an enable toggle, a timeframe and a colour
Midpoint, quarters and eighths switched independently
Price labels on or off, with a size option
Boundary line width, and a separate transparency for the inner levels so the range edges stay dominant
Extend left and extend right, in bars
Open source. Read it, fork it, adapt it. The non-repainting request pattern, the time-anchored drawing and the scale anchor are all worth stealing for your own scripts.
For educational purposes only. Nothing here is financial advice, a recommendation, or a solicitation to trade. Levels are reference points, not signals. Indicator
Indicator
Macros (Time&Price)Macros (Time&Price)
..........
,,,,,,,,
,,,,,,,,,
,,,,,,,, Indicator
Indicator
Indicator
BBG Trap Score Indicator=================================================================
Trap Score - Institutional Liquidity & Trapped Trader Index
=================================================================
DESCRIPTION:
The Trap Score Index is a quantitative, non-repainting trading indicator designed to detect inducement, liquidity sweeps, trapped buyers, trapped sellers, absorption, and failed breakouts near key higher-timeframe (HTF) level locations.
Rather than relying on subjective pattern recognition, this tool translates order flow dynamics and price action into a deterministic 0 to 100 Trap Score computed at the close of every candle.
CORE CONCEPT:
Markets frequently generate fake breakouts beyond key swing highs and lows to trigger retail stop orders and attract aggressive breakout traders into illiquid positions. When institutional participants absorb these breakout orders, price fails to advance and reclaims the broken level, leaving retail traders trapped.
This indicator calculates two independent normalized metrics:
• 🟥 Bearish Trap Score: Measures trapped buyers at key resistance ➔ Short Setup
• 🟩 Bullish Trap Score: Measures trapped sellers at key support ➔ Long Setup
11 QUANTITATIVE SCORING FACTORS (100 Points Max):
Each candle evaluates 11 weighted mathematical conditions to build the 0–100 score:
1. Liquidity Sweep at Level (15 pts): Candle wicks past an N-bar swing level and closes back inside with wick ratio ≥ 35% and sweep distance ≤ 0.50 ATR.
2. Failed Breakout / Reclaim (15 pts): Price traded outside a key level and failed to hold outside within 3 bars.
3. Extreme Delta (10 pts): Intrabar volume delta ≥ 2.0× its 20-period average.
4. Volume Expansion (10 pts): Candle volume ≥ 1.5× its 20-period SMA.
5. Absorption (15 pts): Extreme volume/delta expansion accompanied by minimal price progress (≤ 0.15 ATR).
6. Delta-Price Divergence (10 pts): Volume delta achieves a new 5-bar extreme while price close fails to confirm.
7. Large-Trade Absorption (10 pts): Extreme volume spike (≥ 2.5× average) with a large wick (≥ 40%) and price progress ≤ 0.15 ATR.
8. HTF Location Proximity (10 pts): Current price within 0.15 × HTF ATR of HTF Swings, Previous Day High/Low (PDH/PDL), Previous Week High/Low (PWH/PWL), or Session VWAP.
9. VWAP / Value Area Rejection (5 pts): Rejection wick crossing Session VWAP or ± 1 stddev bands.
10. Confirmation Candle (5 pts): Candle close confirming directional momentum past the sweep range.
11. Exhaustion (5 pts): 3 consecutive bars of declining volume with narrow candle range (< 0.50 ATR).
HOW TO TRADE WITH TRAP SCORE:
1. Conviction Tiers & Signal Thresholds:
• Score < 50: Neutral / No Trade
• Score 50 – 64: Low Conviction (Observe)
• Score 65 – 79: Standard Setup (Default Alert Trigger)
• Score 80 – 89: High Conviction Setup
• Score ≥ 90: Exceptional Setup
2. Entry Rules:
• Enter on the open of the bar following a confirmed signal candle where Trap Score ≥ 65.
• Ensure market has not established acceptance outside the swept reference level.
3. Stop Loss Placement:
• Long Position: Sweep Low - (ATR × 0.10)
• Short Position: Sweep High + (ATR × 0.10)
4. Profit Targets (Partial Scale-Out):
• TP1 (50%): At 1.0R or Session VWAP (Move stop loss to Breakeven).
• TP2 (25%): At range midpoint or opposing value area.
• TP3 (25%): At opposing liquidity pool (PWH for longs, PWL for shorts) or 3.0R.
KEY SETTINGS & CUSTOMIZATION:
• HTF Resolution: Higher timeframe context resolution (Default: 240 / 4H).
• Swing Lookback: Number of bars to confirm reference highs and lows (Default: 20).
• Minimum Entry Score: Configurable signal score threshold (Default: 65).
• Dashboard Table: Toggleable top-right status summary panel displaying live scores, conviction levels, sweep states, and signals.
NON-REPAINTING GUARANTEE:
This indicator uses strict non-repainting Pine Script v6 syntax. Higher timeframe security requests fetch only closed completed bars (lookahead = barmerge.lookahead_off) to prevent lookahead bias or hindsight repainting.
Indicator
EVA Ai+ Auto Chart Patterns - Price Action & Trading Signals🧬 EVA Ai+ — автоматический поиск графических фигур на PulseWire
EVA Ai+ анализирует движение цены и автоматически отмечает графические паттерны прямо на графике. Индикатор строит границы модели, показывает её направление, рассчитывает качество и после подтверждения формирует понятный сигнал ЛОНГ или ШОРТ.
Подходит для технического анализа криптовалют, Bitcoin, Forex, акций, фьючерсов и фондовых индексов. Может использоваться для скальпинга, внутридневной торговли и поиска крупных разворотных моделей.
🔍 Какие паттерны определяет EVA Ai+
📈 Фигуры продолжения движения
🟢 Бычий флаг — ЛОНГ
🔴 Медвежий флаг — ШОРТ
🔵 Бычий вымпел — ЛОНГ
🟠 Медвежий вымпел — ШОРТ
🔄 Разворотные фигуры
🟢 Двойное дно — ЛОНГ
🔴 Двойная вершина — ШОРТ
🟣 Голова и плечи — ШОРТ
🔵 Перевёрнутые голова и плечи — ЛОНГ
📐 Треугольники и клинья
🔷 Симметричный треугольник
📈 Восходящий треугольник
📉 Нисходящий треугольник
🟩 Восходящий клин
🟦 Нисходящий клин
Индикатор анализирует локальные и крупные структуры отдельно. За счёт этого короткая фигура внутри движения не обязана вытеснять более масштабный паттерн.
🧠 Micro и Macro-анализ
EVA Ai+ использует подтверждённые Pivot-точки и сравнивает несколько допустимых комбинаций экстремумов.
Алгоритм оценивает:
геометрию фигуры;
масштаб движения;
симметрию по времени;
положение плеч, вершины или основания;
наклон границ и neckline;
сжатие ценового диапазона;
качество закрытого пробоя;
направление движения перед разворотом.
Для крупных фигур используется отдельный Macro-поиск. Это помогает находить модели, внутри которых присутствуют промежуточные ценовые колебания.
📊 Оценка качества
Каждая найденная структура получает показатель качества:
КАЧ. 78%
Чем выше значение, тем точнее геометрия соответствует выбранной модели. Минимальное качество формирующейся и подтверждённой фигуры регулируется в настройках.
Пример метки:
ГОЛОВА И ПЛЕЧИ
ШОРТ · КАЧ. 84%
КРУПНАЯ · 72 бара
⏳ Формирование и подтверждение
Пока фигура развивается, её линии могут перестраиваться вместе с новыми свечами. Это отображается как:
ФОРМИРУЕТСЯ
Торговый сигнал появляется после закрытия свечи за границей фигуры или линией neckline.
подтверждённая геометрия
+ закрытый пробой
+ достаточное качество
= ЛОНГ или ШОРТ
Формирующийся контур показывает текущий сценарий. Подтверждённая метка фиксируется на свече, где условия сигнала действительно выполнены.
🎯 Расчётные цели
После подтверждения паттерна EVA Ai+ строит расчётную цель движения:
для флага и вымпела — по величине импульсного древка;
для двойной вершины и двойного дна — по глубине модели;
для головы и плеч — по расстоянию от головы до neckline;
для треугольников и клиньев — по начальной высоте структуры.
Цель отображается линией и меткой ЦЕЛЬ.
🎨 Понятный визуал
У каждого семейства фигур свой цвет. На графике отдельно различаются:
флаги;
вымпелы;
треугольники;
клинья;
двойные вершины и основания;
голова и плечи.
Формирующиеся структуры могут отображаться с полупрозрачной заливкой. После подтверждения линия становится заметнее, появляется направление сделки и расчётная цель.
🔔 Оповещения PulseWire
В индикатор добавлены отдельные алерты для основных моделей:
ЛОНГ Флаг
ШОРТ Флаг
ЛОНГ Вымпел
ШОРТ Вымпел
ЛОНГ Двойное дно
ШОРТ Двойная вершина
ШОРТ Голова и плечи
ЛОНГ Перевёрнутые голова и плечи
ЛОНГ Треугольник
ШОРТ Треугольник
ШОРТ Восходящий клин
ЛОНГ Нисходящий клин
📌 Как использовать
Добавьте индикатор на график и выберите нужную чувствительность Pivot, диапазон поиска и минимальное качество.
Дальше:
Посмотрите, какая фигура формируется.
Проверьте её масштаб: локальная или крупная.
Оцените показатель качества.
Дождитесь закрытого пробоя границы.
Сопоставьте сигнал с трендом, объёмом и уровнями поддержки или сопротивления.
Определите допустимый риск до открытия позиции.
EVA Ai+ помогает быстрее находить классические графические фигуры, но не гарантирует результат сделки. Индикатор предназначен для анализа рынка и не является индивидуальной инвестиционной рекомендацией.
🧬 EVA Ai+ Auto Chart Patterns Indicator
EVA Ai+ automatically detects technical analysis patterns directly on the PulseWire chart. It draws pattern boundaries, evaluates structure quality, identifies the expected direction, and produces clear LONG or SHORT signals after confirmation.
The indicator can be used for crypto, Bitcoin, forex, stocks, futures, and index trading. It supports scalping, day trading, and larger swing-trading structures.
🔍 Patterns detected
📈 Continuation patterns
🟢 Bull Flag — LONG
🔴 Bear Flag — SHORT
🔵 Bull Pennant — LONG
🟠 Bear Pennant — SHORT
🔄 Reversal patterns
🟢 Double Bottom — LONG
🔴 Double Top — SHORT
🟣 Head and Shoulders — SHORT
🔵 Inverse Head and Shoulders — LONG
📐 Triangles and wedges
🔷 Symmetrical Triangle
📈 Ascending Triangle
📉 Descending Triangle
🟩 Rising Wedge
🟦 Falling Wedge
Local and large-scale structures are processed separately. This allows the detector to identify a broader chart pattern even when smaller price swings develop inside it.
🧠 Micro and Macro pattern detection
EVA Ai+ evaluates confirmed Pivot points and compares multiple valid swing combinations.
The pattern engine measures:
structure geometry;
price scale;
time symmetry;
shoulder and head alignment;
neckline slope;
boundary convergence;
range compression;
breakout candle quality;
prior directional movement.
A separate Macro search is used for large reversal formations containing intermediate market swings.
📊 Pattern quality score
Every detected structure receives a quality score:
QUALITY 78%
Higher values indicate a stronger geometric match. Developing-pattern and confirmed-pattern thresholds can be adjusted separately.
Example:
HEAD AND SHOULDERS
SHORT · QUALITY 84%
MACRO · 72 bars
⏳ Developing and confirmed structures
While a pattern is developing, its boundaries can update as new candles appear. The label displays:
FORMING
A trading signal is generated only after a candle closes beyond the pattern boundary or neckline.
validated geometry
+ closed-bar breakout
+ sufficient quality
= LONG or SHORT
Developing lines represent the current market scenario. Confirmed signals are placed on the candle where the conditions are completed.
🎯 Measured targets
After confirmation, EVA Ai+ calculates a projected target:
Flag and Pennant — impulse-pole projection;
Double Top and Double Bottom — pattern-depth projection;
Head and Shoulders — head-to-neckline distance;
Triangle and Wedge — opening-height projection.
The projected level is displayed with a line and a TARGET label.
🎨 Clear pattern visualization
Each pattern family has its own color, making it easier to distinguish:
flags;
pennants;
triangles;
wedges;
double tops and bottoms;
head and shoulders formations.
Developing structures can be displayed with a translucent fill. Confirmed patterns receive a clearer outline, directional label, and projected target.
🔔 PulseWire alerts
Separate alert conditions are included for:
LONG Flag
SHORT Flag
LONG Pennant
SHORT Pennant
LONG Double Bottom
SHORT Double Top
SHORT Head and Shoulders
LONG Inverse Head and Shoulders
LONG Triangle
SHORT Triangle
SHORT Rising Wedge
LONG Falling Wedge
📌 How to use
Add the indicator to the chart and configure Pivot sensitivity, pattern-search range, and minimum quality.
Then:
Check which structure is developing.
Review whether it is a Micro or Macro pattern.
Check the quality score.
Wait for a closed candle beyond the boundary.
Compare the signal with trend, volume, support, and resistance.
Define risk before entering a position.
EVA Ai+ helps traders identify classical chart patterns more efficiently. It does not guarantee a profitable trade and should not be treated as individual financial or investment advice.
Indicator
Indicator
Indicator
