Overbought

Scalping using RSI 2 indicator with TSL This strategy implements a simply scalping using the RSI (calculated on two periods), the slopes of two MAs ( EMA or SMA ) having different lengths (by default, I use 50 and 200). A trailing stop loss (%) is used. Entry conditions: .) Fast MA > Slow MA and Price > Slow MA and RSI < Oversold Threshold ------> go Long .) Fast MA < Slow MA and Price < Slow MA and RSI > Overbought Threshold ------> go Short Exit conditions: .) Long entry condition is true and (close >= TP or close <= TSL ) ----> close short position .) Short entry condition is true and (close <= TP or close >= TSL ) ----> close long position The strategy performed best on Bitcoin and the most liquid and capitalized Altcoins but works excellent on volatile assets, mainly if they often go trending. Works best on 3h - 4h time frame. There's also an optional Volatility filter, which opens the position only if the difference between the two slopes is more than a specific value, which can be set in the study inputs. The purpose is not opening positions if the price goes sideways and the noise is way > than the signal. Note: .) the RSI length is 2; .) the oversold Threshold is 90%; .) the overbought Threshold is 10%; .) by default, the trailing stop loss per cent is 1%; .) by default, the fast MA length is 50; .) by default, the slow MA length is 200; .) by default, the MA used is EMA. Cheers.

Strategy

Scalping using RSI 2 indicator with TP and TSL This study implements a simply scalping using the RSI (calculated on two periods), the slopes of two MAs (EMA or SMA) having different lengths (by default, I use 50 and 200). A take profit (%) and a trailing stop loss (%) are used. Entry conditions: .) Fast MA > Slow MA and Price > Slow MA and RSI < Oversold Threshold ------> go Long .) Fast MA < Slow MA and Price < Slow MA and RSI > Overbought Threshold ------> go Short Exit conditions: .) Long entry condition is true and (close >= TP or close <= TSL) ----> close short position .) Short entry condition is true and (close <= TP or close >= TSL) ----> close long position The strategy performed best on Bitcoin and the most liquid and capitalized Altcoins but works excellent on volatile assets, mainly if they often go trending. Works best on 3h - 4h time frame. There's also an optional Volatility filter, which opens the position only if the difference between the two slopes is more than a specific value, which can be set in the study inputs. The purpose is not opening positions if the price goes sideways and the noise is way > than the signal. Note: .) the RSI length is 2; .) the oversold Threshold is 90%; .) the overbought Threshold is 10%; .) by default, the take profit per cent is 0.5%; .) by default, the trailing stop loss per cent is 0.5%; .) by default, the fast MA length is 50; .) by default, the slow MA length is 200; .) by default, the MA used is EMA. Cheers.

Indicator

RSS - RSI(OB/OS)This indicator draws a visual RSI signal on to your chart. You can use it to set RSI alerts when the market enters an extreme RSI condition.

Indicator

by rishabsisodia

Chande Momentum Oscillator - Alerts and Regions It seemed weird to me that the default Chande didn't have overbought and oversold regions, despite them being described for Chande Momentum and working very well. So I added the lines and alert conditions. I've used this to very good results in my day trading. My strategy involved 4 timeframes of candlestick, each with 4 timeframes of Chande overlaid. Candlesticks are 5 min, 20 min, 80 min, 320 min and Chandes are x1, x2, x4 and x8 of the relevant time zone. Give it a shot. Use the 5 min Chande as Buy and Sell signal with the other timeframes for trend confirmation. You may get a lot of extra alerts with this setup, but it's almost impossible to really miss an opportunity if you use it right. It will take up all your free time though, as a warning. Using this strat made me go crazy. Use the chande crossing over the lines as the signal, not just being in the region, as that will make you buy early.

Indicator

by burgercrisis

Multi-Timeframe Stoch RSI Good evening folks! Today I want to share with you a simple variant of the Stochastic-RSI built-in indicator. Nothing too complex: by enabling the relative checkbox and setting the desired (k, d or the RSI ) source and timeframes, you can see higher timeframes data plotted on your screen. Everything you need to do is enabling the indicator on the lowest timeframe (in this case 15 minutes), then you will see in YELLOW the information retrieved from the next higher timeframe (in this case 30 minutes) and in RED the information retrieved from the highest timeframe (in this case 45 minutes). IT'S IMPORTANT THAT YOU DISPLAY THE INDICATOR ON THE LOWEST TIMEFRAME! You can play with the overbought and oversold heights in order to have the best configuration you want (in oversold conditions is suggested to buy while in overbought conditions is suggested to sell) The higher timeframes data are retrieved avoiding repainting since the method used for taking them is the 10th method described in this PineCoders Article , so, if you want to enable alerts, you SHOULD ignore the disclaimer message related to it without any problem. Good Trading!

Indicator

[JRL] Pivot Regression Oscillator Introducing the Pivot Regression Oscillator. This oscillator uses a similar formula to the Stochastic Oscillator. However, instead of comparing the closing price to the lowest price of a period, it compares the distance between current price and the current pivot point. By basing our oscillator on pivot levels, we incorporate a much more relevant and consequential price point around which to base our comparisons. The indicator can give reliable overbought and oversold signals, and it plots two exponential moving averages as output, which provides crossover signals that can be used to help time trades. The Pivot Regression Oscillator can be effective for timing re-entries into a trend and seems to be able to avoid some of the false signals of other indicators. Let me know if you find this useful. Cheers!

Indicator

[blackcat] L1 MACD with Overbought and Oversold Detection Level: 1 Background This MACD is designed with unique oversold and overbought detections, which you may not sell or buy immedidately. You may need to watch the trend movements and decide to buy or sell on current or next goldcross and deadcross respectively. Function Add oversold and overbought detections for MACD to locate proper entry point. Key Signal diff--> MACD fast line dea --> MACD slow line macdhisto --> MACD histogram overbought --> overbought signal oversold --> oversold signal Pros and Cons It assits you to locate a rough zone for overbought and oversold in classic MACD indicator. Classic MACD indicator does not have this function. Remarks Since we cannot look into the future, so it does not inform you on exact entries but alerts of current or next cross may be a good opportunity. Readme In real life, I am a prolific inventor. I have successfully applied for more than 60 international and regional patents in the past 12 years. But in the past two years or so, I have tried to transfer my creativity to the development of trading strategies. Tradingview is the ideal platform for me. I am selecting and contributing some of the hundreds of scripts to publish in Tradingview community. Welcome everyone to interact with me to discuss these interesting pine scripts. The scripts posted are categorized into 5 levels according to my efforts or manhours put into these works. Level 1 : interesting script snippets or distinctive improvement from classic indicators or strategy. Level 1 scripts can usually appear in more complex indicators as a function module or element. Level 2 : composite indicator/strategy. By selecting or combining several independent or dependent functions or sub indicators in proper way, the composite script exhibits a resonance phenomenon which can filter out noise or fake trading signal to enhance trading confidence level. Level 3 : comprehensive indicator/strategy. They are simple trading systems based on my strategies. They are commonly containing several or all of entry signal, close signal, stop loss, take profit, re-entry, risk management, and position sizing techniques. Even some interesting fundamental and mass psychological aspects are incorporated. Level 4 : script snippets or functions that do not disclose source code. Interesting element that can reveal market laws and work as raw material for indicators and strategies. If you find Level 1~2 scripts are helpful, Level 4 is a private version that took me far more efforts to develop. Level 5 : indicator/strategy that do not disclose source code. private version of Level 3 script with my accumulated script processing skills or a large number of custom functions. I had a private function library built in past two years. Level 5 scripts use many of them to achieve private trading strategy.

Indicator

by blackcat1402

Non-Rescaled RSI █ OVERVIEW Relative Strength Index is a momentum oscillator developed by J. Wilder. The original version of RSI rescaled the relative strength measurement to range. While the rescaling is useful for readability, This non-rescaled version tells the exact average relative strength of the movement for the past period, and give another way to put the relative strength reading into context of current market condition. █ Description & How To Use 1. The (+/-) in relative strength value indicates the direction Example 1: Relative Strength of 2.33 means average gain is 2.33 bigger than average loss for the past period (Equivalent to RSI 70) Example 2: Relative Strength of -2.33 means average loss is 2.33 bigger than average gain for the past period (Equivalent to RSI 30) Example 3: Relative Strength of 0 means average gain is equal to average loss for the past period (Equivalent to RSI 50) Look at comparison below: 2. You can use it exactly how you would use RSI: Overbought/Oversold state, Divergence, Trend identification, Failure Swings etc.. █ Features - Overbought/Oversold line still maintainable as standard RSI level (70,30) in user input screen. The script will recalculate and plot the ob/os level accordingly - Value Label to indicate the RSI and RS value - Custom Gradient Color Scheme █ Limitation The Relative Strength absolute value is capped at 20 to avoid ratio value too big(or too small). This is enough to get accurate equivalent of RSI reading between 5-95 █ Disclaimer Past performance is not an indicator of future results. My opinions and research are my own and do not constitute financial advice in any way whatsoever. Nothing published by me constitutes an investment/trading recommendation, nor should any data or Content published by me be relied upon for any investment/trading activities. I strongly recommends that you perform your own independent research and/or speak with a qualified investment professional before making any financial decisions.

Indicator

by fareidzulkifli

Screener - Mean Reversion Channel █ OVERVIEW This is Screener script for Mean Reversion Channel Indicator █ Description & How To Use The screener works by scanning through up to 40 symbols and list down symbols that are currently within Overbought/Oversold Zone as defined by Mean Reversion Channel indicator. The Overbought/Oversold Zone are further categorized and sorted by: Strong : Indicated by "(Strong)" next to the symbol name Normal : Indicated by the absence of "(Strong)" or "(Weak)" next to the symbol name Weak : Indicated by "(Weak)" next to the symbol name Notes: Refer to chart above to see how the Zone are categorized. Notes: If the screener displays "Nothing Interesting". It simply means none of the screened assets are within the Overbought/Oversold Zone. █ Features - Scan up to 40 symbols at a time (By default, no asset is define. Once configured all the symbols you required, remember to save as default to save you from pain of configuring it again in the future) - Options to scan by zones - Custom Timeframe █ Limitation Due to multiple use of security() function required to call other symbols, expect the screener to be slow at certain times █ Disclaimer Past performance is not an indicator of future results. My opinions and research are my own and do not constitute financial advice in any way whatsoever. Nothing published by me constitutes an investment recommendation, nor should any data or Content published by me be relied upon for any investment/trading activities. I strongly recommends that you perform your own independent research and/or speak with a qualified investment professional before making any financial decisions. Any ideas to further improve this indicator are welcome :) Credit: QuantNomad for his script idea on custom screener

Indicator

by fareidzulkifli

Everything RSI This indicator includes: RSI Candles set to the default 14 length (un check Borders in the Style tab to see the candlesticks better) I like using the wicks as an early warning for a possible trend change, which is generally in the opposite direction of the wicks. It's also easier for me to draw trend lines using the RSI Candles vs the rsi plot line. 40 ema of the RSI Candles 2nd RSI set to the 20 length , which plots just inside the wicks of the RSI Candles. This RSI also highlights Oversold and Overbought levels. I sometimes leave the RSI Candle Borders checked and use the 20 RSI plot with the wicks of the RSI Candles Signals to look for Short or Long opportunities , which use the 5 sma of the RSI Candles crossing under the overbought and over the oversold levels. If you'd like to plot the 5 sma, remove the // at the beginning of the code on line 72. 3nd RSI set to the default 14 length which can be set to a different timeframe as the current chart. Default setting is the 1h. This RSI plots a + at the top of the indicator when it's above the 50 level and an x at the bottom of the indicator when it's below the 50 level. For me, this is just a visual aid when I'm scalping on lower timeframes. If the 1h RSI is above the 50 level, I focus on long scalps. If the 1h RSI is below the 50 level, I focus on short scalps. RSI Cloud which is formed by filling in the area between the 14 ema of both the 7 RSI and 28 RSI. I used part of @FnM_Capital 's Trend-Sniper script for my RSI Candles. Thank you! You're extremely talented and deserve all of the credit for your work. I'd also like to thank @SeanNance for answering all of my random coding questions!!! I've added the indicator to the example twice to show a couple of the ways I view the RSI's. The top indicator shows the RSI Candle Borders "un checked" and without the 2nd RSI plot. The bottom indicator shows RSI Candle Borders "checked", using 2nd RSI plot with the RSI Candle Wicks.

Indicator

Mean Reversion Channel - (fareid's MRI Variant)Description : Mean Reversion Channel objective, based on Mean Reversion theory ( everything has a tendency to revert back to its mean), is to help visualizing: Inner Channel -> Dynamic Support and Resistance Outer Channel -> Overbought/Oversold Zone which may signal consolidation phase or potential reversal due to unsustainable move Details on some of the filtering type used for mean calculation can be read in Ehlers Technical Papers: "Swiss Army Knife Indicator" and/or his book "Cybernetics Analysis for Stock and Futures" Disclaimer: These study scripts was built only to test/visualize an idea to see its viability and if it can be used to optimize existing strategy. Any ideas to further improve this indicator are welcome :)

Indicator

by fareidzulkifli

Triple RSI This idea behind this indicator was to show an un cluttered view of the RSI on 3 different timeframes. The RSI for the current chart highlights Lime/Red when it crosses the Overbought and Oversold levels, which are editable in the Inputs tab. RSI 2 defaults to the 1h timeframe and prints a lime dot at the top of the indicator when it's above the 50 level and a Red Dot at the bottom of the indicator when it's below the 50 level. It can also be viewed as a plot line that changes color when it's above or below the 50 level. RSI 3 defaults to the 4h timeframe and prints a blue square at the top of the indicator when it's above the 50 level and an orange square at the bottom of the indicator when it's below the 50 level. It also can be viewed as a plot line that changes color when it's above or below the 50 level. I've added the indicator multiple times to show a few of the different viewing options, with the default settings at the very bottom.

Indicator

Trend-following RSI Strategy According to classical technical analysis, an RSI above 70 should signal overbought conditions and, thus, a sell-signal. Cryptocurrencies represent a whole new asset class, and they reshape the classical concepts of technical analysis. FOMO-buying can be very powerful, and coins can remain in overbought conditions enough to provide excellent opportunities for scalping trades on the upside. Building a trend-following trading strategy based on the RSI, which is generally considered a contrarian indicator, may sound counter-intuitive. Over 200 backtests prove that this is a very interesting long-term setup. The setup is optimized on a 4-hours time frame and trading cryptocurrencies versus USD or stable coins. The strategy tries to catch coins on sustained uptrends to take advantage of further upside. The strategy's buy-signal triggers when a coin has an RSI above 70 on a 4-hours time frame. The strategy sells the coin if a profit of 6% is achieved. Alternatively, it closes the position if the RSI drops below 55, indicating a possible weakening of the trend. The strategy assumes each order to trade 30% of the available capital. A trading fee of 0.1% is taken into account. The fee is aligned to the base fee applied on Binance, which is the largest cryptocurrency exchange.

Strategy

G-RSI&EMA channel v.1 This my 2nd indicator : It's just a Strenghtening of trend channal If price can come up on the green line it's mean price is side way or maybe bullish and if price can come up on RSI (14)50 and EMA50 it have problaby to bullish trend If the price have blue ball it's mean crazy strong bullish trend If the price have red ball it's mean crazy strong bearish trend you can use my 1st script together : 1st is " G-Bollingerbands Volatility breakout " My 1st script detect the price begin to have volatility My 2nd scrit detect the trend Goodluck :D PS: My 2nd script develop from someone in pulsewire RSI script i'm sorry I can't remember but thank you very much.

Indicator

[blackcat] L2 VWAP CCI Trading System Level: 2 Background Volume-Weighted Average Price (VWAP) is a trading benchmark used by traders that indicates the average price that a security has traded for throughout the day based on volume and price. This is important as it gives traders insight into the trend and value of a security. The Commodity Channel Index (CCI) indicator was created to identify bullish and bearish market cycles, as well as to define market turning points and the strongest and weakest market periods. CCI was developed for commodities and quickly found application in other markets, including forex. Function blackcat L2 VWAP CCI Trading System is an innovative indicator that combines vwap and cci indicator together. Not only long and short entries can be disclosed, but also the overbought and oversold zones are clearly observed. Key Signal cci ---> vwap cci indicator output long --> long entry condition short --> short entry condition backtest --> indicator backtest scheme "NLX-L3 Backtest" required input source for strategy backtest longentry --> visual long entry shortentry --> visual short entry Pros and Cons Pros: 1. exact long and short entries are produced by overbought and oversold conditions 2. support "NLX-L3 Backtest" framework Cons: 1. noise may be produced under extreme market condition 2. due to this is un-optimized version, time frame and trading pairs need to be selected Remarks Courtesy of @nilux "NLX-L3 Backtest" easy backtest framework for dummies. Step by step backtest guide with "NLX-L3 Backtest" framework: STEP1: Add this indicator into your chart STEP2: Add "NLX-L3 Backtest" into your chart STEP3: Click "Settings" gear icon of "NLX-L3 Backtest" to select "Select L2 Indicator" in the 1st line as "blackcat L2 VWAP CCI Trading System: backtest" STEP4: Configure your backtest other settings under "NLX-L3 Backtest" framework STEP5: Click "OK" and view the results in "Strategy Tester" tab Readme In real life, I am a prolific inventor. I have successfully applied for more than 60 international and regional patents in the past 12 years. But in the past two years or so, I have tried to transfer my creativity to the development of trading strategies. Tradingview is the ideal platform for me. I am selecting and contributing some of the hundreds of scripts to publish in Tradingview community. Welcome everyone to interact with me to discuss these interesting pine scripts. The scripts posted are categorized into 5 levels according to my efforts or manhours put into these works. Level 1 : interesting script snippets or distinctive improvement from classic indicators or strategy. Level 1 scripts can usually appear in more complex indicators as a function module or element. Level 2 : composite indicator/strategy. By selecting or combining several independent or dependent functions or sub indicators in proper way, the composite script exhibits a resonance phenomenon which can filter out noise or fake trading signal to enhance trading confidence level. Level 3 : comprehensive indicator/strategy. They are simple trading systems based on my strategies. They are commonly containing several or all of entry signal, close signal, stop loss, take profit, re-entry, risk management, and position sizing techniques. Even some interesting fundamental and mass psychological aspects are incorporated. Level 4 : script snippets or functions that do not disclose source code. Interesting element that can reveal market laws and work as raw material for indicators and strategies. If you find Level 1~2 scripts are helpful, Level 4 is a private version that took me far more efforts to develop. Level 5 : indicator/strategy that do not disclose source code. private version of Level 3 script with my accumulated script processing skills or a large number of custom functions. I had a private function library built in past two years. Level 5 scripts use many of them to achieve private trading strategy.

Indicator

by blackcat1402

Improved Commodity Channel Index I took the normal CCI version and I made it better and more pleasantly visual. At the same time now the CCI changes color based on the direction is going to take We also have more levels, to define even better the current situation. Details are simple : green color cci = uptrend - > buy red color cci = downtrend - > sell

Indicator

Ehlers Adaptive Commodity Channel Index V1 [CC]The Adaptive Commodity Channel Index V1 was created by John Ehlers (Rocket Science For Traders pgs 236-237) and this is the typical Commodity Channel formula with the introduction of adaptive lengths based on his earlier work with indicators such as the Mother of Adaptive Moving Averages. For longer term signals you would get a bullish signal when CCI is above 0 and a bearish signal when CCI falls below 0. For shorter term signals you would get a bullish signal when crosses over it's overbought level or when it crosses above it's oversold level or vice versa. I have included both signals to make it easier. Let me know if you want a custom script written or if you have a special request for me

Indicator

by cheatcountry

dirt cheap yet elegant RSI Strategy For Educational Purposes. Results can differ on different markets and can fail at any time. Profit is not guaranteed. This only works in a few markets and in certain situations. Changing the settings can give better or worse results for other markets. This is a good way to show off a good looking strategy, atleast in paper, with minimal effort involved in the making and usage. It can be made with the most minimal lines of code if needed to bring shame unto others. It only works in a few markets and who knows if it will actually rebound from the overbought or oversold levels but in case it doesn't I put in a time-based stop to exit in case of that worst case scenario. There's not much to it, good for trolling others, or serious business, you decide.

Strategy

RSI Trends RSI is a momentum indicator, however most people seem to be using it to go against the momentum by trying to identify tops/bottoms using it. Its in my opinion the wrong way to be using it. It can be easily used for trend following which seems like a better use for it. Uptrend - RSI > 60 Downtrend - RSI < 40 Sideways - RSI between 40 and 60 If however not interested in filtering for sideways trends and convert it to a long-short only strategy that stays in market all the time then it can be simply modified by setting both overbought/oversold thresholds to 50. In such a case uptrend will be above 50 and downtrend will be less than 50. Note: wait for close for current bar to be confirmed as RSI is calculated at close

Indicator

by zzzcrypto123

RSI with Self-Adjusting Linear Regression Bands (Expo)RSI with Self-Adjusting Linear Regression Bands (Expo) makes use of RSI and Linear Regression to create an RSI that follows the current trend. The indicator has an upper and lower self-adjusting Linear Regression Band that act as RSI boundaries. HOW TO USE The indicator can be used in multiple ways, for instance, to find overbought and oversold areas. Or to identify trends as well as pullbacks in trends. INDICATOR IN ACTION This indicator is a modification of RafaelZioni's work "Linear Regression Trend bands" Credit to: RafaelZioni I hope you find this indicator useful , and please comment or contact me if you like the script or have any questions/suggestions for future improvements. Thanks! I will continually work on this indicator, so please share your experience and feedback as it will enable me to make even better improvements. Thanks to everyone that has already contacted me regarding my scripts. Your feedback is valuable for future developments! ----------------- Disclaimer Copyright by Zeiierman. The information contained in my scripts/indicators/ideas does not constitute financial advice or a solicitation to buy or sell any securities of any type. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, or individual’s trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs. My scripts/indicators/ideas are only for educational purposes!

Indicator

MTF Stoch RSI Screener Displays when multiple timeframes of Stochastic RSI are overbought/oversold. Multiple consecutive timeframes being overbought/oversold can signify a short term top or bottom. Thanks to Micse in Pinescripters telegram who helped remove a few errors from this.

Indicator

by zzzcrypto123

Percentage Price Over SMA Return the percentage of closing prices greater than SMA's with periods within a user-selected range. An exponential moving average applied to these results is also displayed (in orange). Settings Min : Minimum period of the SMA in the range Max : Maximum period of the SMA in the range Smooth : Period of the EMA Src : Input series of the indicator Usage The indicator is a normalized oscillator. A value of 100 indicates that 100% of the current closing price is over SMA's with periods ranging from min to max , this indicates a bullish market, while a value of 0 would indicate a bearish market. In this image the indicator use min = 50 and max = 200, here AMD has been strongly bullish at the start, and ended being strongly bearish at the end, during this bullish period the indicator is over its overbought level, while it is under its oversold level during the bearish period. In case the market is ranging we can expect the indicator to be around 50%, using the smoothed result might be more useful to detect ranging markets with this indicator. If the smoothed result is within the overbought/oversold levels, then we can say that the market is either ranging or transitioning from a bullish/bearish market to an opposite one.

Indicator

Hybrid Overbought/Oversold Detector + Put/Call Signals There are many indicators of overbought/oversold conditions out there. Some of more common ones are: - Bollinger Bands %B - Money Flow Index (MFI) - Relative Strength Index (RSI) - Stochastic This script uses a combination of these 4 oscillators to confirm overbought/oversold and filter the signals of market reverse which could be used for trading binary options. You may select which oscillators you want to apply and of course change the source, the length of the calculations and the overbought/oversold levels. Also the script will draw a combined graph which is the average of the selected oscillators in the options. Send me your ideas!

Indicator

In-depth global business and economic analysis Comprehensive trading education and market insights