Overbought

34 EMA Bands [v2]Updating an older concept here with some more oversold/overbought zones. Pretty self explanatory, red zone indicate overbought zones and green zone is a oversold. Often, price likes to bounce off of the lower bounds of these zones, but it can sometimes extend all the way through the zone onto the upper boundary. There are many lines to this indicator, i prefer using it with all the lines off except the outermost ones. However, you can edit it if it suits you better. Source code is open, so any suggestions to improve its accuracy are welcome :)

Indicator

Oversold / Overbought My first script. Based on RSI , CCI , RVI, and MFI . You can customize overbought or oversold thresholds for any indicator. If you have any ideas - welcome. Disclaimer This is not financial advice. Trade on your own risk.

Indicator

Ehlers Stochastic Relative Vigor Index [CC]The Stochastic Relative Vigor Index was created by John Ehlers (Cybernetic Analysis For Stocks And Futures pgs 84-89) and this of course is very similar to the Ehlers Fisher Stochastic Relative Vigor Index I just published. In hindsight I probably should have published this one first but just like with the other script this is a stochastic version of a Relative Vigor Index and I added some smoothing to make buy and sell signals clearer. There are several ways to identify buy and sell signals but generally in the long term it is a buy signal when the indicator is below the oversold line and is moving up and in the short term when the indicator is above it's trigger line which is what I coded the buy and sell signals to follow. Buy when the line is green and sell when it turns red. Let me know if there are any other scripts you would like to see me publish!

Indicator

by cheatcountry

Ehlers Fisher Stochastic Relative Vigor Index [CC]The Fisher Stochastic Relative Vigor Index was created by John Ehlers (Cybernetic Analysis For Stocks And Futures pgs 101-104) and this is a many layered indicator created from his original Relative Vigor Index turned into a stochastic and then performing a Fisher transform on the results. I have included extra smoothing to provide clearer buy and sell signals as well as normal and strong buy and sell signals. As always strong signals are darker in color and normal signals are lighter in color. Buy when the line turns green and sell when it turns red. Let me know if there are any other scripts you would like to see me publish!

Indicator

by cheatcountry

Kirill Channel This indicator shows overbought and oversold zones. Can be used on all time frames. I personally use 15m - 30m. How to apply ?: - There can be many strategies for use! I use this indicator to buy an asset in the green zone and then sell it in the middle of the channel or in the red zone. - I strongly advise against entering counter-trend positions in a growing market if you have little trading experience and understanding of price action. How do I place orders ?: - I place orders in a grid. - If the price is very close to the edge, but it is difficult to reach it, then it is better to open a position on the market and place orders deep into the grid. - If the price is at the edge of the channel for a very long time, then you need to look at a higher timeframe. Algorithm composition: - ALMA - Keltner Channel - Fibonacci Retracement - Custom price percent offset calculations and manipulations. Settings: - I strongly do not recommend changing ALMA. These numbers have been specially calculated. - It's better not to change Borders either. The current algorithm dynamically changes the width of the extreme channels depending on the price movement. - The Keltner Channel was specially selected. - Fibonacci Retracement can be changed. This part of the algorithm can be modified to suit your needs. At the moment, there are settings for aggressive trading. Channel type: - Conservative: Fibonacci Retracement settings (100 ma, 100 atr, 8 mult, 100 smooth) - Aggressive: Fibonacci Retracement settings (25 ma, 25 atr, 3.5 mult, 100 smooth) Сonservative channel does not allow a large number of points to enter positions, however, it is more straightforward and safer for very large movements. I prefer aggressive settings because they allow me to make more profit on the number of trades. Try to use both modes and choose what is preferable for you.

Indicator

by GASANOV_KIRILL

RSI Multi TF strategy The RSI is a very popular indicator that follows price activity. It calculates an average of the positive net changes, and an average of the negative net changes in the most recent bars, and it determines the ratio between these averages. The result is expressed as a number between 0 and 100. Commonly it is said that if the RSI has a low value, for example, 30 or under, the symbol is oversold. And if the RSI has a high value, 70 for example, the symbol is overbought. Plots 3 RSI (Weekly, Daily, 4h) at the same time, regardless of the Chart Timeframe. Highlights in green (or red) if all RSI is oversold (or overbought). Can trigger custom oversold and overbought alerts when all 3 lines grey(4h), yellow(weekly), and red(daily) go in the oversold or overbought zone. The strongest the curves break the barrier the strongest the alert (vertical red and green bars) shows.

Indicator

RSI Trend Line I took a concept similar to the "Adaptive RSI" to get the RSI overlaid on a price chart. The problem I have with the Adaptive RSI is to me it sticks too closely to price. I wanted something much more visually helpful that can provide actual tradable signals and strategies. The orange line you are seeing is the "RSI Trend Line" The further the RSI moves away from a value of 50 (the "zero line"), the more you see this orange line move away from price. This helps visualize the strength of price pushing away from a neutral value to a position of strength or weakness-- if orange is below price then relative strength is high; if orange is above price then relative strength is low. When price is equal to the orange RSI line, the RSI is at a value of 50. In addition to the trend line, you can enable bands which reflect Overbought and Oversold levels . If you leave the responsiveness to a value of 1.0 and removed any smoothing, these should pretty accurately reflect an actual RSI chart topping the OB and OS lines (default 70 and 30, respectively). (They're still very close with different responsiveness and smoothing values) The conversion or scaling of RSI value onto price comes with a bit of a quirk which I decided to leave to the user to determine how they want it applied. So the setting "Responsiveness" will impact the sort of aggressiveness of the RSI trend line as well as the the size of the bands. You could think of this in some ways as the OPPOSITE of the multiple setting on a Bollinger or Keltner band-- 1.0 will make for the widest band, 2.0 is the default and my preference, and you can move it up to a value of 5.0. Here are some examples of how you could use the indicator for trade signals-- And here's my thought on the current state (as of 10/06) on indices with regards to this indicator-

Indicator

RSI Overbought Oversold Divergence Strategy w/ Buy/Sell Signals This indicator is a copy of my RSI Overbought/Oversold Divergence Indicator with-Alerts Only difference is that the alerts are disabled, instead it uses pulsewires strategy tester signals If you want alerts just use the other indicator

Strategy

RSI Overbought Divergence Indicator with Alerts This indicator alerts you only if there are divergences after price was oversold or overbought

Indicator

McClellan Oscillator Jack Corsellis [LazyBear Modified]Developed by Sherman and Marian McClellan, the McClellan Oscillator is a breadth indicator derived from Net Advances, the number of advancing issues less the number of declining issues. Subtracting the 39-day exponential moving average of Net Advances from the 19-day exponential moving average of Net Advances forms the oscillator. As the formula reveals, the McClellan Oscillator is a momentum indicator that works similar to MACD . McClellan Oscillator signals can be generated with breadth thrusts, centerline crossovers, overall levels and divergences. The original code was written by LazyBear ( code here: ) We have modified this code: 1. Added the ability to display and configure the overbought and undersold lines which are key to properly using this indicator. These are set to default +40 and -75 respectively. 2. This version uses USI:ADV(advances- issues) and USI:DECL (declines - issues) as the default.

Indicator

by JackCorsellis

Roc Mean Reversion (ValueRay)This Indicator shows the Absolute Rate of Change in correlation to its Moving Average. Values over 3 (gray dotted line) can savely be considered as a breakout; values over 4.5 got a high mean-reverting chance (red dotted line). This Indicator can be used in all timeframes, however, i recommend to use it <30m, when you want search for meaningful Mean-Reverting Signals. Please like, share and subscribe. With your love, im encouraged to write and publish more Indicators.

Indicator

by derMatzeImNetz

Multiband Oscillator - Zigzag version Just variation of Multi Band oscillator present here: Multi-Band-Channel-Oversold-Overbought-Oscillator Changes are: Instead of regular moving average, here I am using Zigzag Moving average. This is calculated in similar to as explained in: Zigzag-Cloud Instead of ATR, using AZR (Average Zigzag Range) - Average-Zigzag-Range-AZR Rest of the logic remains same. Number of bands used 100 - which means, calculate 100 Bollinger bands with Std Dev Multiplier starting from 0.1 and with step 0.1 for the next one. Which divides price ranges into 200 equal parts. Calculate what is the current range and plot them. Overbought - Oversold levels are dynamics. They are dependent on the max and min state price has reached in last 80 days. Offset and factor can be used to adjust overbought oversold levels.

Indicator

Ehlers Adaptive Stochastic Indicator V1 [CC]The Adaptive Stochastic Indicator V1 was created by John Ehlers (Rocket Science For Traders pgs 233-234) and this indicator uses the same calculations to find a cycle period that is then used for both the creation of the stochastic indicator but also for the smoothing to create a double smoothed stochastic indicator. Because it is calculated this way, this indicator is more reactive than almost any other stochastic indicator and provides clear buy and sell signals especially when the underlying stock is trending. It is interpreted in the same way as a normal stochastic indicator so great buy signals are when the indicator is below the oversold line and starts to move up and vice versa. Buy when the line turns green and sell when it turns red. Let me know if there are any other indicators you would like to see me publish!

Indicator

by cheatcountry

Relative Strength Index 2x ma The relative strength index, represented as two moving averages with periods, one of which will be a multiple of the longer moving average by the amount you set. The indicator can work both in automatic and manual mode. In automatic mode, the optimal periods are selected, in my opinion, depending on which timeframe is being analyzed at the current moment. In manual mode, you can set the required period yourself. You can also set the method of smoothing the moving averages yourself and apply them to the opening or closing, the minimum of the bar, etc. An important point: it is possible to enable/disable graphical functions that may not be required - just check the box next to the function that you want to see on your indicator. Show ConDiv? - enabling / disabling the convergence/divergence function of the moving averages of the RSI indicator (not to be confused with the MACD for the asset price chart) Show ma? - enabling/disabling the graphical display of the moving averages of the RSI indicator Show RSI? - enabling / disabling the standard RSI indicator (if you want to see only it, check the box opposite; in this case, you need to remove the other two checkboxes) I wish you good luck in building your trading plans, and remember: such indicators do not predict the future price movement on the chart, they only determine the characteristics of the price movement at the current time, taking into account historical data.

Indicator

RSI+Channelbands This Indicator displays a normal RSI with overbought/-sold lines which is calculated with donchian channels, pivot channel, bollinger bands and three horizontal lines. You can averaged the channels, bands and h-lines in any combination or you can use just one of them for calculating the overbought/-sold lines. The midline is colored in default settings in yellow for upptrending and blue for downtrending.

Indicator

Folded Relative Strength Index [CC]The Folded Relative Strength Index was created by Richard Poster (Stocks and Commodities July 2021 pg 21) and this indicator provides both trend strength but also momentum and of course reversal points using the overbought and oversold markers. If the indicator line is above the mid line then this shows upward momentum and when it falls below the midline then this means it is losing momentum. When the indicator rises above the signal line then this shows upward trend strength and vice versa. Buy when the indicator line turns green and sell when it turns red. Let me know if there are any other indicators you would like to see me publish!

Indicator

by cheatcountry

SuperTrend Oscillator [LuxAlgo]This oscillator is made of three components, all derived from the SuperTrend indicator. This approach allows the user to easily determine overbought/sold zones, identify whether a retracement is present or if the price is ranging or trending. It also allows for the anticipation of the potential price cross with the SuperTrend. We provide additional information including whether a signal returned by the SuperTrend was false, as well as the percentage of false signals. Settings Length: Period of the "average true range" used in the calculation of the SuperTrend Mult: Multiplicative factor for the "average true range" Smooth: Determines the degree of smoothing of the histogram Misc: Fixed Transparency: Use a fixed transparency for the main oscillator Show Lines: Show the lines displayed by the indicator Show Labels: Show the labels displayed by the indicator Usage The indicator is in a range of (-100,100) with values closer to 100/-100 indicating a stronger trend. The main oscillator value above 0 indicates that the price is above the SuperTrend. It is possible to identify when a retracement is present in a trend. This is often indicated by an oscillator value moving within 50/-50. Each overbought/oversold level can be used to determine potential exit points. The indicator also includes two additional oscillators derived from the main oscillator. A smoothed version of the main oscillator (Signal), and a smoothed version of the difference between the Main and Signal oscillators (Histogram), thus making the oscillator part of the indicator more similar to MACD. One can use the histogram to anticipate when the price might cross the SuperTrend by comparing the sign between the main and histogram. Potential false signals can also be filtered with this method. Certain crosses between the price and SuperTrend can be filtered out when the histogram and main oscillator have a different sign (here main = 1, histogram = -1). We include various indications in order to analyze the signals returned by the SuperTrend. The indicator displays symbols indicating whether a signal was false or not. A cross symbol will be displayed at the top of the displayed lines when the previous Buy signal was false, else a checkmark is displayed. Symbols displayed at the bottom of the lines are referring to sell signals. We also provide a percentage of false signals, calculated over the entire chart history. Details The scaling method used is similar to max-min normalization. We first compute the difference between the price and SuperTrend and divide the result by the difference between the upper and lower extremity used to compute the SuperTrend. Values higher than (1,-1) can occur when price crosses the SuperTrend and as such we use the max and min functions to attenuate these. The filter used to compute the signal line is based on exponential averaging and is fully adaptive. The smoothing factor used for its computation is the squared value of the main oscillator, divided by length . Since higher values of the oscillator are associated with trending markets, the filter will be closer to the main oscillator when the market is ranging.

Indicator

(JS) Interchanging ATR & VWAP Bands Okay so this is pretty simple, but I think it's a great tool for day trading especially. I just took the default VWAP and Keltner channel scripts and combined them together. The top option allows you to choose which one you'd prefer to use, "Use ATR instead of VWAP" . The next options, "ATR Source", "KC Length", and "ATR Length" are the parameters for the ATR Bands. "Number of Bands" allows you to choose how many bands you'd like to be on display (you can choose 1-8). "Use Expoential MA" and "Band Style" are more default parameters from Keltner Channels used to set up the ATR Bands. The "ATR Bands" are just stacked Keltner Channels separated by 1 ATR each, whereas the "VWAP Bands" are separated by standard deviation just like the default script from Trading View. In these example chart, you can see the weekly VWAP with 8 deviation bands and 5 ATR bands with Keltner Channels.

Indicator

Overbought/Oversold Bands The basis of this script is my "Hybrid Overbought/Oversold Detector" which uses many different oscillators to confirm overbought/oversold conditions. The main idea is to generate higher and lower bands around the desired moving average using an average of the volatility (ATR) and the standard deviation (StDev), of course by interfering detected overbought/oversold condition. Simply put, the more the asset become overvalued/undervalued, the tighter the channel would be and every breakout of the bands announces a return back into the channel in near future. By default, the multiplier of the standard deviation in the indicator settings is set to 2 which means only less than 5% of price actions would appear outside the bands. Also the default multiplier of the ATR is set to 3 which leads to some similar result, but to achieve more strict results setting StDev multiplier to 3 and ATR multiplier to 4 would be useful. The type of the central moving average could be picked up from 6 different types which are: - SMA (Simple Moving Average) - EMA (Exponential Moving Average) - HMA (Hull Moving Average) - LSMA (Least Squares Moving Average) - TMA (Triangular Moving Average) - MAEMA (My Personalized Momentum Adjusted EMA) The latter one leads to a useful combination of the channel with the momentum. Also the script has multi-timeframe features and the user could apply calculations from other time frames to the current chart. Hope the idea would be helpful!

Indicator

Dziwne MFI Overlay (with highlight)It is simply your traditional MFI , except that your 50 line became the actual price. Why and how could it be useful? This indicator helps to spot more easily and efficiently divergences . You could also use it for trend reversals as you usually do with your 50 line, but I would suggest to set a higher length for the MFI, like 155 or something like that.

Indicator

CCI Overbought & Oversold The Commodity Channel Index (CCI) is a momentum-based oscillator used to help determine when an investment vehicle is reaching a condition of being overbought or oversold Developed by Donald Lambert, this technical indicator assesses price trend direction and strength, allowing traders to determine if they want to enter or exit a trade, refrain from taking a trade, or add to an existing position. In this way, the indicator can be used to provide trade signals when it acts in a certain way. KEY TAKEAWAYS The Commodity Channel Index (CCI) is a technical indicator that measures the difference between the current price and the historical average price. When the CCI is above zero, it indicates the price is above the historic average. Conversely, when the CCI is below zero, the price is below the historic average. The CCI is an unbounded oscillator, meaning it can go higher or lower indefinitely. For this reason, overbought and oversold levels are typically determined for each individual asset by looking at historical extreme CCI levels where the price reversed from This script calculates Commodity Channel Index (CCI) value and fills background of price action chart with colors: Green zone indicates oversold zone where you can enter position Red zone indicates overbought zone where a positions should be closed

Indicator

Combo Backtest 123 Overbought/Oversold This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy Simple Overbought/Oversold indicator WARNING: - For purpose educate only - This script to change bars colors.

Strategy

RSI Colour Overlay Applies Blue or Pink colour overlay to candles when RSI is at or over the predefined parameters. These parameters are adjustable in the settings area of the indicator. Please note RSI does not guaranteed a pivot point in price action and the colour overlay should only be used as an indication or condition not a call to buy or sell alone. The colour overlay is a useful prompt to review price action. I hope this helps and good luck with your analysis and trading.

Indicator

In-depth global business and economic analysis Comprehensive trading education and market insights