PulseHub
Get started

Options

SVT Big Swing Capture Early CatchSVT Big Swing Capture — What It Does SVT Big Swing Capture is designed to help identify larger CALL and PUT swing opportunities in stocks and ETFs such as SPY and QQQ, rather than short-term scalps. It uses the 30-minute chart to find the swing , while Daily and 2H provide higher-timeframe context. The indicator looks for an EMA20/EMA50 trend change, then confirms the direction using MACD, RSI, trend expansion, momentum, and market participation. Quick Trading Rules CALL: EMA20 > EMA50, MACD > 0, RSI > 50, and the bullish trend is expanding. PUT: EMA20 < EMA50, MACD < 0, RSI < 50, and the bearish trend is expanding. Enter when the dashboard shows a valid Fresh, Normal, or Late CALL/PUT setup. Once entered, focus on holding the larger trend , not reacting to every small pullback. Exit when the indicator prints EXIT , the EMA20/EMA50 trend reverses, the structural stop is reached, or the swing clearly weakens. Simple idea: Find the trend → confirm the direction → enter the swing → hold the big move → exit when the trend breaks.
Strategy
by seanvtran
Tubbsie's Chop Warning Indicator**Chop Warning** A simple, at-a-glance indicator that tells you whether the market is trending cleanly or chopping sideways around a moving average — the kind of environment where breakouts fail, stops get hunted, and most trend-following setups don't work. **How it works** The indicator picks a reference EMA (13 by default) and counts how often each candle's high–low range contains that EMA. When price is trending, most candles sit cleanly above or below the moving average and the count stays low. When price is chopping, the EMA sits inside candle after candle and the count rises. Two views are reported side by side: - **Rolling** — the percentage of crosses over the last N candles, showing what's happening right now - **Session** — the percentage across the whole trading session, showing the character of the day as a whole Both figures appear in a small on-chart table, colour-coded green (clean), amber (mixed), or red (choppy). A single verdict line at the top summarises the current state in plain English. **Settings** Everything is configurable: EMA length, rolling window size, the two thresholds that define "clean" and "choppy", which view drives the warning (rolling, session, or either), the session window and timezone, table position and size, colours, and optional background shading when a warning is active. Alerts fire when chop is detected and when the market cleans up again. **How to use it** Works on any market and any timeframe. Add it to your chart alongside your existing setup and treat a red verdict as a filter — a signal to stand aside, reduce size, or wait for the environment to improve before taking a trend-based trade.
Indicator
by Tubbsie
1
RG VWAP LevelsSkrypt automatycznie wyświetla najważniejsze poziomy wykorzystywane podczas handlu intraday na rynku amerykańskim: 🔵 Session VWAP – bieżący VWAP liczony od otwarcia sesji (9:30 ET). 🟠 Prior-Day / Multi-Day VWAP – VWAP liczony od otwarcia premarketu poprzedniego dnia. 🔴 Previous Day High – maksimum poprzedniej sesji. 🟢 Previous Day Low – minimum poprzedniej sesji. 🟡 Premarket High – najwyższa cena premarketu. 🟡 Premarket Low – najniższa cena premarketu. Przeznaczenie Wskaźnik został zaprojektowany do handlu intraday akcjami i ETF-ami na rynku USA, szczególnie na interwałach 1 min, 5 min i 15 min.
Indicator
by radek_gie
IZIZIZ/IS: GEX / Vanna LevelsGEX / Vanna Levels visualizes manually supplied Vanna and GEX levels directly on the price chart. +van and -van are displayed as shaded zones, while positive and negative GEX minimum/maximum levels are shown as labeled horizontal lines. All values are entered through a single multiline input field: +van: 7469,7542 -van: 7406,7334 +gex-min: 7450 +gex-max: 7506 -gex-min: 7394 -gex-max: 7283 The indicator includes individual visibility controls, customizable colors, line width, Vanna-zone transparency, label offset, and optional level values in labels. This script does not calculate Vanna or GEX—it is intended only for plotting externally derived levels.
Indicator
by iziziz-tomato
5min ORB + Ripster EMA CloudsHere's an updated version that covers **1-minute candles** and explains **the clouds**: --- **5-Min ORB — Opening Range Breakout (with 1-Min Precision)** This indicator marks the opening range of the session and highlights breakouts above or below it. While the range itself is built from the first 5 minutes of trading, you view and trade it on the **1-minute chart** for sharper entries and cleaner signals. **Why use 1-minute candles** Running this on a 1-minute timeframe gives you five candles inside the opening range instead of one. That means: - You see exactly how the range forms — whether buyers or sellers dominated the open. - Breakout timing is more precise, since a 1-min close through the level triggers sooner than waiting on a full 5-min candle. - Stops and entries can be tighter, because you're reacting to smaller price increments. - You catch fast momentum moves early, which matters most in the first 15–30 minutes when volatility is highest. The trade-off: 1-minute charts produce more noise, so confirmation (a candle *close* beyond the level, not just a wick) becomes more important to avoid getting faked out. **Understanding the clouds** The "clouds" are the shaded zones the indicator paints on your chart. They give you instant visual context without reading exact price numbers: - **The opening-range cloud** — the shaded box between the ORB high and ORB low. This is your no-man's-land. Price chopping inside this cloud means the market hasn't picked a direction yet, so most traders stay flat until price escapes it. - **The bullish cloud (above the range)** — shades green (or your chosen color) once price breaks and holds above the ORB high. It signals the buyers are in control and marks the zone where long setups are valid. - **The bearish cloud (below the range)** — shades red once price breaks below the ORB low, signaling seller control and the zone for short setups. Think of the clouds as a traffic-light system: inside the range = wait, above = long bias, below = short bias. They keep you on the right side of momentum and stop you from fighting the trend. **How to use it** Let the first 5 minutes complete on your 1-minute chart to form the range. Watch for a 1-min candle to close outside the opening-range cloud. When price pushes into the bullish cloud, look for longs; when it drops into the bearish cloud, look for shorts. Combine with volume and higher-timeframe trend for the strongest setups. *This tool is for educational purposes only and is not financial advice. Always backtest and manage risk before trading live.* --- Want me to fold this into the full description as one polished write-up, trim it for the PulseWire publish box, or adjust the cloud color/logic explanation to match a specific indicator you're using?
Indicator
by Stockzncrypto
Options Swing Helper - Expected Move, Volatility & StructureOptions Swing Helper combines volatility analysis, trend tools, and market structure into a single dashboard, designed to help options and swing traders gauge probable price ranges and momentum at a glance. Expected Move Cone: Projects a forward-looking price range using annualized historical volatility (as a stand-in for implied volatility), scaled by the square root of time for your chosen number of days. Displays the +/-1 standard deviation levels and a center line, and calculates an HV Rank (the percentile of current volatility versus its own lookback history) to flag whether volatility looks Cheap, Fair, or Rich - useful context before buying or selling premium. Moving Averages & Signals: Three configurable EMAs with optional buy/sell triggers based on EMA crossovers or price crossing an EMA, with an optional filter requiring the long-term EMA's direction (and slope) to agree before signaling. Market Structure: Automatic swing high/low detection with strong vs. weak classification, zone boxes, and BOS/CHoCH break labels to visualize trend structure and potential reversals. Dashboard: A live table summarizing price, historical volatility, HV Rank, expected move (in points and %), the 1 SD range, a volatility premium read, trend bias, and the current EMA signal. All inputs are fully customizable via grouped settings for the cone, moving averages, signals, structure, and dashboard display. Created by Academia Trade. This script is provided for informational and educational purposes only and does not constitute financial advice.
Indicator
by gyoss80
0dte scalper v4 Kalman SuperTrend and ADX Volatility WavesThis is a signal driven scalping tool for options trading. Entries and exits labled on chart, and a comprehensive logging system for anyone looking for a starting point for an agentic trading bot. Uses a series of logic statements and indicators including: Squeeze Momentum MACD Kalman SuperTrend ADP Volatillity and more... Includes dynamic take profit points, and stop losses which are adjustable based on risk tolerance. Feel free to provide feedback, as I'm constantly developing. Happy Trading!
Strategy
by Scalpulat0r
AlgoStorm Expected Move Levels (EML)AlgoStorm Expected Move Levels (EML) A precision options-implied range mapping tool that plots daily and weekly ±1σ and ±2σ expected-move bands from the ATM straddle, from implied volatility, or from an automatic average-range fallback — with a live meter showing how much of the average daily and weekly range has already been consumed. The AlgoStorm Expected Move Levels (EML) indicator is designed for index and futures traders who trade with the options market's own forecast. The at-the-money straddle is the market's priced bet on how far the underlying travels before expiry; the expected move derived from it defines the range the market is paid to defend. Gamma levels show where dealers defend — the expected move shows how far the market is priced to travel . Together they form the complete options-informed map for index futures, and EML is the second half of that pair. DATA INPUT — READ BEFORE LOADING This indicator carries no built-in options data feed. Setup is a single paste. Our free browser-based GEX dashboard includes an Expected Move calculator that auto-fills spot and the ATM straddle from delayed CBOE quotes and emits one CSV line — 1,anchor,dailyStraddle,weeklyStraddle,multiplier (example: 1,6350.25,44.30,94.80,0.85). Drop that line into the EM Data field and every value is populated at once; the leading 1 is a format version the script validates, so a malformed or mismatched paste is flagged on the chart instead of silently plotting nonsense. Prefer to work from your own options chain? The Manual Entry group still accepts an ATM straddle price (call + put at the strike nearest spot) or an annualized implied-volatility figure, and a valid paste simply takes precedence over it. With the paste field empty and both manual inputs at zero, the script runs standalone on its average-range fallback, so it works out of the box. Refresh the paste once per session, before the open. Symbol Mode: SPX / ES plots pasted values as-is — SPX options are struck at the same levels ES trades. SPY mode divides the pasted anchor and straddles by 10. Scaling is applied to pasted values only; manual entries are always read in chart units. Technical Architecture: Triple-Source Expected Move Pipeline Versioned Paste Decoder: One string input carries anchor, daily straddle, weekly straddle and multiplier — validated on version and field count, with every absent slot decoding to zero so it falls through to the manual entries and then to the range fallback. The info table reports whether the live values came from the paste, from manual entry, or from the automatic fallback. Straddle Conversion Engine: EM(1σ) = ATM straddle × 0.85. A straddle's price is its expected payout; under a normal approximation, roughly 85% of that payout equals the 1σ price range. The multiplier is exposed as an input — set 1.0 to use the raw straddle convention instead. A pasted line carries its own multiplier and takes precedence; when using the paste workflow, adjust the multiplier on the dashboard before copying. Volatility Mode: EM(daily) = anchor × IV × √(1/252) and EM(weekly) = anchor × IV × √(5/252), the trading-day convention. Useful when you track IV but not option prices. Automatic Fallback Cascade: Any zeroed input degrades gracefully — daily falls back to the Average Daily Range (default 14 days), weekly to the Average Weekly Range (default 8 weeks), and a missing weekly straddle first derives from the daily straddle × √5. The info table always displays which source is live, so there is never ambiguity about what the bands represent. Chart-Side Lock Engine: The script contains zero request.security calls. Anchors and bands compute from the chart's own session boundaries and lock at the day/week open — they cannot move intraday, and there is no repaint path by construction. Range Consumption Meter: Completed daily and weekly ranges feed fixed-length rolling windows; the current period's range is expressed as a percentage of its average ("today has used 78% of its average range") — the continuation/exhaustion filter the EM bands are read with. Features & Functionality Daily Expected Move Bands: ±1σ and optional ±2σ steplines around a configurable anchor — prior close (the desk-quoting convention, default), today's open, or the spot price carried in the paste. Weekly Expected Move Bands: The identical structure anchored at the weekly boundary, off by default for chart cleanliness. Anchor Lines: Dimmed reference steplines marking the exact price the bands are centred on. Live Info Table: Effective daily and weekly EM with source labels, ADR/AWR values, day/week range-consumption percentages that highlight when a range is fully spent, and an EM Data row reporting paste / manual / fallback status. Symbol Mode: SPX / ES one-to-one, or SPY with pasted values auto-scaled ÷10 — a chart label confirms whenever scaling is active. Alert Suite: Seven conditions — daily ±1σ break, daily ±2σ break (tail move), weekly ±1σ break, and ADR exhausted (day range reaches 100% of average). All fire on confirmed closes; a crossed band cannot move away afterward. Honest limitations: the expected move is model context, not a boundary — roughly one day in three closes outside the ±1σ band by construction, because that is what 1σ means . Straddle and IV inputs are static: re-enter them when the session rolls or the volatility regime shifts. ADR/AWR use chart-session ranges, which on continuous futures include the overnight session — usually what you want on full-Globex instruments, but know your convention. Open-source under CC BY-NC-SA 4.0. Educational tool — not financial advice.
Indicator
by AlgoStorm
5min ORB + Ripster EMA Clouds**5-Min ORB — Opening Range Breakout (with 1-Min Precision)** This indicator marks the opening range of the session and highlights breakouts above or below it. While the range itself is built from the first 5 minutes of trading, you view and trade it on the **1-minute chart** for sharper entries and cleaner signals. **Why use 1-minute candles** Running this on a 1-minute timeframe gives you five candles inside the opening range instead of one. That means: - You see exactly how the range forms — whether buyers or sellers dominated the open. - Breakout timing is more precise, since a 1-min close through the level triggers sooner than waiting on a full 5-min candle. - Stops and entries can be tighter, because you're reacting to smaller price increments. - You catch fast momentum moves early, which matters most in the first 15–30 minutes when volatility is highest. The trade-off: 1-minute charts produce more noise, so confirmation (a candle *close* beyond the level, not just a wick) becomes more important to avoid getting faked out. **Understanding the clouds** The "clouds" are the shaded zones the indicator paints on your chart. They give you instant visual context without reading exact price numbers: - **The opening-range cloud** — the shaded box between the ORB high and ORB low. This is your no-man's-land. Price chopping inside this cloud means the market hasn't picked a direction yet, so most traders stay flat until price escapes it. - **The bullish cloud (above the range)** — shades green (or your chosen color) once price breaks and holds above the ORB high. It signals the buyers are in control and marks the zone where long setups are valid. - **The bearish cloud (below the range)** — shades red once price breaks below the ORB low, signaling seller control and the zone for short setups. Think of the clouds as a traffic-light system: inside the range = wait, above = long bias, below = short bias. They keep you on the right side of momentum and stop you from fighting the trend. **How to use it** Let the first 5 minutes complete on your 1-minute chart to form the range. Watch for a 1-min candle to close outside the opening-range cloud. When price pushes into the bullish cloud, look for longs; when it drops into the bearish cloud, look for shorts. Combine with volume and higher-timeframe trend for the strongest setups. *This tool is for educational purposes only and is not financial advice. Always backtest and manage risk before trading live.*
Indicator
by Stockzncrypto
Key TickerKey Ticker --- ## 📌 Overview Key Ticker** is a minimalist, high-contrast chart utility designed to display the active currency pair or symbol prominently on your PulseWire workspace. Featuring a high-visibility industrial design with bold black typography on a vibrant yellow badge, this script automatically converts trading pair symbols into a clean **BASE/QUOTE** format (e.g., **NZD/USD**, **EUR/USD**), allowing for instant symbol identification. --- ## ⚡ Key Features * **Automatic Pair Formatting:** Intelligently reads base and quote currencies to format forex, crypto, and asset pairs cleanly with a forward slash (`BASE/QUOTE`). * **High-Contrast Design:** Features solid black text over a bright yellow background for maximum readability across both dark and light chart themes. * **Multi-Chart & Streaming Friendly:** Ideal for traders who use multi-chart layouts, record video analysis, take screenshots, or stream trading sessions. * **Flexible Placement:** Move the badge to any corner of your screen to ensure it never overlaps with your price action or technical indicators. * **Lightweight & Efficient:** Written natively in **Pine Script v6** for zero execution delay and minimal computational load. --- ## ⚙️ Settings & Customization * **Badge Position:** Choose where the ticker badge is rendered on your chart: * *Top Left* (Default) * *Top Right* * *Bottom Left* * *Bottom Right* * **Text Size:** Adjust typography sizing to match your screen resolution: * *Huge* (Recommended for high-resolution displays) * *Large* * *Normal* --- ## 🚀 How to Use 1. **Add to Chart:** Apply the script to any chart layout. 2. **Customize:** Open indicator settings (**Inputs** tab) to adjust position and font size. 3. **Trade:** Enjoy a clean, modern ticker badge on your charts!
Indicator
by Fibonacci_Flow
SPX Next Candle Predictor [5m/15m]How it predicts: 7 weighted strategies each score −1 to +1, combined into a probability %: EMA trend (9/21) — trend alignment and price location VWAP position — above/below session VWAP, ATR-normalized (key SPX day-trade level) RSI momentum — level plus slope MACD histogram — sign plus expansion/contraction Volume confirmation — auto-disables on SPX (index has no volume); use ES1! or SPY to enable it Candle patterns — engulfing, hammer, shooting star, 3-bar runs Higher-TF bias — 15m trend when on 5m, 1h when on 15m What you see: dashboard with probability % (e.g., 68% ↑ / 32% ↓), per-component breakdown, and an arrow on the next bar. Signals fire at ≥60% (adjustable), high-confidence at ≥70%. Alerts included for both. Key feature — live accuracy tracking: it grades every past prediction against what actually happened and shows the real win rate on your chart. Watch that number for a week before sizing up; if high-confidence accuracy isn't meaningfully above 50%, tune the weights in settings. Honest caveat: next-candle direction on a 5m chart is close to a coin flip even for good models — a consistent 55–60% edge with proper risk management is what this can realistically give you, not certainty. Not financial advice.
Indicator
by foreignDiamond10453
SPY GAP FILL LEVELSPlots a fresh set of horizontal reference levels every regular trading session, anchored to that session's open (0%) and the prior session's closing price (100%). Customizable intermediate levels — defaults to 25%, 30%, and 50% — mark key retracement zones between the two, automatically adjusting direction for gap ups and gap downs. Features: 0% level = current session's RTH open 100% level = previous session's RTH close Fully editable percentage levels (add/change as many as you like) Customizable colors for each level Lines and labels reset fresh each session — no carryover or continuous lines bleeding across days Optional minimum gap filter to suppress the box on days with negligible gaps How to use: Add to any intraday chart with extended hours turned off. The box will draw starting on the second session after adding the indicator (it needs a prior session's close as a reference point). Levels can be used to gauge partial gap-fill targets, support/resistance zones, or general session structure relative to the prior close. Note: Designed for RTH-only data — extended hours should be disabled on your chart for accurate open/close anchoring.
Indicator
by bcallis
MACD Pro: Presets by Trading Style with Trend and Chop Filters-------DESCRIPTION There is no single best MACD setup. The right one depends on your timeframe and on how you trade. Gerald Appel built the indicator around 12, 26 and 9 for daily and weekly charts. Put those numbers on a fast intraday chart and the signal lags behind the price action. MACD Pro carries the tested setup for each trading style, and it will pick one for you based on the chart you are on. ----------THE PRESETS Swing (4H, daily, weekly) uses 12, 26 and 9. This is the original setup. It finds macro trends and major reversals without catching every bit of market noise. Day trading (5m, 15m, 1H) uses 8, 17 and 9. Balanced responsiveness. It cuts the lag on intraday charts while keeping enough smoothing to avoid constant whipsaws. Intraday momentum (3m, 5m) uses 5, 13 and 1. Dropping the signal length to 1 turns the signal into a direct zero-line cross, which is the sweet spot for catching quick intraday momentum pushes. Scalping (1m, 3m) uses 3, 10 and 1. Maximum sensitivity to short-term price bursts. High frequency and noisy, so it demands strict risk management. "Auto by timeframe" reads your chart and loads the right setup for you. Move from a 5-minute chart to a daily chart and the settings follow you. Custom is there when you want your own numbers. -----------WHY A SIGNAL LENGTH OF 1 IS HANDLED DIFFERENTLY An exponential average of one period returns the input unchanged. That means at a signal length of 1, the signal line sits exactly on top of the MACD line and a crossover can never fire. In that mode the script hides the signal line and switches the trigger over to the zero-line cross. The table on the pane tells you which mode is running. --------------THE FILTERS 200 EMA trend filter. Longs only while price is above the 200 EMA, shorts only while price is below it. A crossover that passes prints a solid triangle. A crossover that fails prints a hollow circle, so you still see that it happened and can judge it yourself. Chop filter. The MACD is a trend-following momentum tool. In a sideways range, crossovers fire over and over, and every one of them is a whipsaw. When ADX sits under your threshold, the pane shades gray and crossovers are marked as failed. Rely on crossovers only when price is expanding or breaking out. ----------------THE HISTOGRAM AS AN EARLY WARNING The histogram measures the distance between the MACD line and the signal line. When those bars start shrinking toward zero, momentum is exhausting, even before any crossover happens. Bars print bright while the histogram is expanding and fade to translucent while it is contracting. A bright green run turning pale is your cue to tighten stops or take something off the table. Yellow dots mark two shrinking bars in a row if you want it called out explicitly. --------------PAIR IT WITH STRUCTURE Never take a MACD entry on its own. Line the signals up with breaks of support and resistance, or with an opening range breakout backed by above-average volume. The more elements in agreement, the more confidence you can carry into the trade. ---------------ALERTS - Filtered bullish signal - Filtered bearish signal - Upside momentum exhausting - Downside momentum exhausting -----------------NOTES Written in Pine Script version 6. Every setting is editable, so nothing here is locked to my preferences.
Indicator
by Stoicchoco809
15-Min Opening Range ProjectionsHere is a quick-reference user guide summarizing how to use and interpret the **15-Min Opening Range Projections** indicator. ### 🎯 Overview This indicator is designed for day traders who use Opening Range Breakout (ORB) strategies. It automatically identifies the price range established during the first 15 minutes of the trading day and calculates mathematical breakout and breakdown targets based on that range's volatility. ### ⚙️ How It Works 1. **Timeframe Requirement:** You **must** apply this indicator to a **5-minute chart**. The script's logic specifically counts the first three candles of the new day to build the 15-minute range. 2. **Range Calculation:** It tracks the absolute highest high and lowest low across those first three 5-minute candles. 3. **Target Projection:** Once the 3rd candle closes, it measures the total point distance of the opening range and duplicates that distance above the high and below the low to create your intraday targets. 4. **Dynamic Plotting:** The lines and price labels will float across your screen, keeping themselves anchored to the right edge of the chart in real-time as the trading day progresses. ### 📊 Visual Guide Once the first 15 minutes of the day have completed, four lines will populate on your chart, tracked by right-aligned floating labels: * **🟢 Solid Green Line (5M 3-Candle High):** The upper boundary (resistance) of the opening 15-minute range. * **🔴 Solid Red Line (5M 3-Candle Low):** The lower boundary (support) of the opening 15-minute range. * **🟣 Dashed Purple Line - Top (Upper Proj +Range):** The bullish breakout target. If price breaks above the green line, this is the projected mathematical destination. * **🟣 Dashed Purple Line - Bottom (Lower Proj -Range):** The bearish breakdown target. If price breaks below the red line, this is the projected mathematical destination. ### 🛠️ Settings & Inputs You can customize the indicator's behavior by opening the script's settings menu (the gear icon next to the indicator name on your chart): * **Show Historical Daily Levels (Checkbox):** * *Checked (Default):* Keeps the lines and targets drawn for previous trading days so you can backtest and review historical accuracy. * *Unchecked:* Deletes the previous day's levels as soon as a new trading day begins, keeping your chart completely clean and focused only on today's price action.
Indicator
by vishwakrishna416
Multi-Session Opening Range [Davies T]Multi-Session Opening Range Plots the Opening Range Breakout (ORB) for up to four sessions at once — London, New York AM, New York PM, and Asia — each with its own on/off toggle. For every session you enable, it draws a box around the high and low of the opening range, plus a dashed line through the middle marking the 50% level. The box and line stay extended on the chart for the rest of the session. How to use it: Turn on the sessions you trade in the settings. Default range is the first 15 minutes of each session (the standard ORB window) — change it if you prefer a different length. Timezones adjust automatically for daylight saving, so you don't need to update anything when the clocks change. This is a levels tool only — it doesn't give buy or sell signals.
Indicator
by DAVIES_T
FVG+sell+buy Trend & Value: EMA 9 must be above EMA 20 for longs (and below for shorts), while price interacts with the VWAP as an intraday anchor. Fair Value Gap (FVG): A 3-candle pattern where a market imbalance leaves an unfilled "gap" between Candle 1's wick and Candle 3's wick. Institutional Entry (Order Block/Mitigation): Institutions buy or sell with massive volume. This script defines an institutional entry when price mitigates (taps into) a fresh FVG on above-average volume, signaling that big players are defending that price level. PulseWire Pine Script V5 Code Tap inside the code box below and copy it. Open PulseWire, clear your current script entirely so it is completely blank, paste this code, and click Save.
Strategy
by nishadkrishnan82
Trailing Drawdown Line Futures PropFirmsSee the exact price where your trailing drawdown gets hit — before it happens. Built for futures prop-firm traders (Apex, Topstep, MyFundedFutures, Tradeify, BluSky and similar). Enter your firm's trailing DD size, your buffer at entry and your contract count, then click your entry point on the chart. The indicator draws your liquidation line — the price where the account would breach the trailing max drawdown — and ratchets it the way the firm actually does: it trails the implied equity peak at the FULL drawdown distance, and if you enter below your prior peak the line starts closer but does not move until price beats that peak. Features • Works on any futures symbol automatically — the contract's point value is read from the symbol (ES, NQ, MNQ, MES, GC, CL, ZB, …). Non-USD contracts (e.g. FDAX) display in their quote currency. • Three trailing models: Intraday (trails every new high/low — real-time-trailing firms), Bar close, and End of day (EOD-trailing firms; needs an intraday or 1D chart). • Live buffer readout — dollars and points left before the line — in a dark info table and an on-chart label. • Breach is latched: once the line is touched the status stays BREACHED, because a trailing max-DD hit is terminal, not a temporary state. On historical bars the intraday model errs toward flagging (the path inside a bar is unknowable) — confirm on a lower timeframe. • Lock support: enter the price where your firm freezes the DD (breakeven lock), or let the script derive it from your start balance + equity at entry. Status flips to LOCKED. • Exit time: set it when you close the trade — the line and buffer freeze, because real DD levels stop moving while you're flat. • Two alert conditions: buffer below warning level, and line touched. How to use: add to chart → click your entry point → set contracts, firm DD size and buffer at entry (from your firm dashboard) → pick the trailing model that matches your firm → optionally create the two alerts. Re-anchor for every new trade. Honest limitations: models ONE fixed-size position on THIS symbol. Scaling in/out or holding other instruments changes your real equity path and is not modeled. Anchor on a low timeframe (1–5 min) for precision. Educational risk-visualization tool — always confirm your firm's exact drawdown rule on their own site.
Indicator
by PropfirmVerifier
Real-time market data and financial news In-depth global business and economic analysis Live stock quotes and portfolio tools
Link Terkait
Live stock quotes and portfolio tools
Comprehensive trading education and market insights