Indicator
HA Daily Bias & EMA SetupDisclaimer
This indicator is inspired by the trading concepts discussed by Animesh K in "Learn Dual Edge Trading and Mindset."
This indicator is an independent implementation of selected concepts and should not be considered an official version of his strategy.
Trading involves risk. This indicator is intended as a decision-support tool and does not guarantee profitable trades.
Indicator Objective
The purpose of this indicator is to combine:
Daily Heikin Ashi Trend Bias
34 EMA Dynamic Trend Levels
Entry Confirmation
Exit Confirmation
Trend Filtering
to provide a clean trend-following trading system.
The indicator attempts to keep traders aligned with the higher timeframe trend while using the current timeframe for entries.
Core Trading Logic
The strategy is built around two ideas:
Determine the higher timeframe market bias.
Only take trades in the direction of that bias.
Instead of predicting reversals, the indicator follows momentum.
Daily Heikin Ashi Bias
The indicator first checks the previous day's Heikin Ashi candle.
Bullish Bias
Previous HA Close > Previous HA Open
Market Bias = Bullish
Only LONG trades are allowed.
Bearish Bias
Previous HA Close < Previous HA Open
Market Bias = Bearish
Only SHORT trades are allowed.
Neutral
If neither condition exists,
No directional bias exists.
Daily Support and Resistance
The indicator plots:
Previous Daily HA High
Previous Daily HA Low
These become important reference levels for:
Support
Resistance
Trend continuation
Risk management
Green Dots
= Previous HA Low
Red Dots
= Previous HA High
EMA Setup
The indicator uses two separate EMAs.
EMA 1
Length: 34
Default Source:
High
Purpose:
Bullish confirmation.
EMA 2
Length: 34
Default Source:
Low
Purpose:
Bearish confirmation.
Long Entry Rules
A LONG signal appears only when all conditions are true.
Condition 1
Daily Bias = Bullish
AND
Condition 2
Previous candle crosses above EMA High
AND
Condition 3
Current candle closes above EMA High
If all three conditions are satisfied,
A LONG label is printed.
Long Exit
The position exits when
Previous candle crosses below EMA Low
AND
Current candle closes below EMA Low
EXIT label appears.
Short Entry Rules
A SHORT signal appears only when:
Daily Bias = Bearish
AND
Previous candle crosses below EMA Low
AND
Current candle closes below EMA Low
SHORT label appears.
Short Exit
Exit occurs when
Previous candle crosses above EMA High
AND
Current candle closes above EMA High
EXIT label appears.
Signal Filtering
The indicator contains a built-in state management system.
Possible states:
Flat
Long
Short
This prevents duplicate entries.
Example:
LONG
LONG
LONG
LONG
Instead, only the first LONG signal is displayed until an EXIT occurs.
Likewise,
SHORT
SHORT
SHORT
SHORT
Only one SHORT signal is displayed.
Historical Signals
Option:
Show Historical Signals
ON
Displays every historical signal.
OFF
Displays only the latest signal.
Useful for clean charts.
Dashboard
The dashboard displays:
Previous Day HA Bias
Bullish
Bearish
Neutral
and
Previous HA Support Level
User Inputs
EMA Settings
Setting Default
EMA Length 34
EMA High Source High
EMA Low Source Low
Style Settings
Option Description
Show Daily HA Levels Display previous HA High and Low
Show Historical Signals Display all signals
Filter Consecutive Signals Prevent repeated LONG or SHORT signals
Recommended Timeframes
The indicator works best on:
5 Minute
15 Minute
30 Minute
1 Hour
4 Hour
The Daily Heikin Ashi bias remains constant throughout the trading day while entries are generated from the selected chart timeframe.
Suggested Workflow
Step 1
Determine Daily Bias.
If Bullish
Only look for LONG trades.
If Bearish
Only look for SHORT trades.
Step 2
Wait for EMA confirmation.
Do not anticipate the signal.
Step 3
Enter only after the label appears.
Step 4
Allow the trend to continue.
Step 5
Exit only when the opposite EMA confirmation occurs.
Risk Management Suggestions
Although this indicator generates entry and exit signals, every trade should include predefined risk controls.
Common approaches include:
Risk a fixed percentage of account equity per trade (e.g., 1–2%).
Place a protective stop below the recent swing low for long trades or above the recent swing high for short trades.
Consider taking partial profits at predetermined risk-reward levels while allowing the remainder to follow the exit signal.
Avoid forcing trades when the market is range-bound or during unusually low liquidity.
Best Market Conditions
This indicator generally performs best in:
Trending markets
Strong directional momentum
Stocks, ETFs, Index Futures, and Forex pairs with sustained trends
It may generate more false signals during sideways or choppy markets.
Indicator Summary
Feature Description
Higher Timeframe Filter Previous Day Heikin Ashi Bias
Trend Filter 34 EMA (High) & 34 EMA (Low)
Long Entries Bullish bias + EMA breakout confirmation
Short Entries Bearish bias + EMA breakdown confirmation
Exits Opposite EMA confirmation
Daily Levels Previous HA High & Low
Dashboard Current Daily Bias and HA Support
Signal Filter Prevents duplicate consecutive signals
Indicator
CQ_(-)_MTF Countdown Table================================================================================
CQ_(-)_MTF COUNTDOWN TABLE — USER MANUAL
© CQuevedo345
================================================================================
Pine Script v6 | Overlay Indicator | Multi-Timeframe Candle Timer
────────────────────────────────────────────────────────────────────────────────
OVERVIEW
────────────────────────────────────────────────────────────────────────────────
The CQ MTF Countdown Table is a real-time, multi-timeframe candle progress
monitor that displays how far into — and how far from the close of — each
major candle period you currently are. It renders a compact table directly
on your chart showing elapsed time, remaining time, and progress percentages
for up to four timeframes simultaneously: 1H, 4H, 1D, and 1W.
The table updates live on every bar close and on the last bar using timenow,
so the countdown is always accurate to the second.
────────────────────────────────────────────────────────────────────────────────
FEATURE SUMMARY
────────────────────────────────────────────────────────────────────────────────
• Multi-Timeframe Coverage
Tracks candle progress across 1H, 4H, 1D, and 1W simultaneously.
Each timeframe can be independently shown or hidden.
• Elapsed Percentage Column
Shows what percentage of the current candle has already elapsed,
displayed as a whole number (e.g. 73%). The cell background uses a
color gradient that transitions from a user-defined "low" color at 0%
to a user-defined "high" color at 100%, giving an instant visual read
of candle age at a glance.
• Elapsed Time Columns (Days + Time)
For 1H, 4H, and 1D rows, the Days column is intentionally left blank
(those candles don't span multiple days) and the Time column shows
elapsed time formatted as MM m (1H) or HH h : MM m (4H, 1D).
For the 1W row, both the Days column (e.g. 03D) and the Time column
(e.g. 14h : 22m) are populated to reflect the full weekly structure.
• Remaining Time Columns (Days + Time)
Mirror of the elapsed columns, but counting down toward the candle
close. The 1W row shows remaining days and remaining intraday time
separately. The remaining columns have their own independent text-size
setting so they can be made larger or smaller than the rest of the
table without affecting other columns.
• Seconds Alert Column
When remaining time on any row drops below a user-configured threshold
(0–5 minutes), a dedicated RMNG SECS cell lights up showing the exact
remaining seconds (e.g. 47s). The cell and text color change to a
high-contrast alert style automatically. Above the threshold the cell
stays blank and dim.
• Bullish / Bearish TF Label Color
The leftmost cell of each row (the TF label: 1H, 4H, 1D, 1W) is
colored green or red depending on whether the current close is at or
above the candle's open (bullish) or below it (bearish). Colors are
fully customizable.
• Active Timeframe Marker
When the chart's current timeframe matches one of the table rows, that
row's label is prefixed with a ▶ arrow so you can instantly see which
row corresponds to the candle you are currently trading on.
• Gradient on Time Cells (Optional)
When the gradient toggle is enabled, elapsed time cells adopt the same
low→high gradient as the percentage column. Remaining time cells use
the inverse (high→low). When the gradient is enabled, the otherwise-
empty "Days" cells on 1H/4H/1D rows are also filled with the matching
gradient color, keeping the row visually cohesive instead of leaving
dead dark gaps. When the toggle is off, all time cells use a uniform
dim background.
• Orientation Toggle
The entire table can be switched between Horizontal (timeframes as
rows, columns as data fields — the default) and Vertical (timeframes
as columns, data fields as rows). All cell logic, merging, and
alignment adapts automatically.
• Position, Size, and Color Customization
Every visual aspect of the table is configurable: table position
(8 anchor points), global text size, remaining-column text size
(independent), title background, header background, text colors for
elapsed and remaining fields, gradient low/high colors, bullish and
bearish background colors, and seconds-alert text color.
• Week Anchor — Monday 00:00 UTC
The 1W candle is anchored to Monday midnight UTC regardless of the
broker or exchange session, matching PulseWire's standard weekly
candle definition. The calculation uses timenow and UTC dayofweek to
derive the exact open timestamp of the current week dynamically.
• Accurate 4H and 1D Duration
Rather than assuming fixed 4-hour or 24-hour durations, the indicator
reads time_close from request.security for 4H and 1D so that DST
shifts, session gaps, and exchange-specific candle lengths are handled
correctly.
────────────────────────────────────────────────────────────────────────────────
TABLE LAYOUT
────────────────────────────────────────────────────────────────────────────────
Horizontal orientation (default):
┌─────────────────────────────────────────────────────────────────────┐
│ MTF ELAPSED/REMAINING CANDLE TIME │
├────────┬───────────┬────────────┬────────────┬───────────┬──────────┤
│ TF │ ELPSD % │ ELPSD DAYS │ ELPSD TIME │ RMNG DAYS │ RMNG TIME│ RMNG SECS
├────────┼───────────┼────────────┼────────────┼───────────┼──────────┤
│ 1H │ 73% │ │ 43m │ │ 17m │
│▶ 4H │ 18% │ │ 00h : 43m │ │ 03h : 17m│
│ 1D │ 62% │ │ 14h : 52m │ │ 09h : 07m│
│ 1W │ 44% │ 03D │ 14h : 22m │ 04D │ 09h : 37m│
└────────┴───────────┴────────────┴────────────┴───────────┴──────────┘
Column index reference:
Col 0 — TF label (bull/bear colored)
Col 1 — Elapsed percentage (gradient colored)
Col 2 — Elapsed days (1W only; gradient-filled on other rows if gradient ON)
Col 3 — Elapsed time (formatted per TF)
Col 4 — Remaining days (1W only; gradient-filled on other rows if gradient ON)
Col 5 — Remaining time (formatted per TF)
Col 6 — Remaining seconds alert (appears only near candle close)
In Vertical orientation the rows and columns are transposed: each
timeframe becomes a column and each data field becomes a row.
────────────────────────────────────────────────────────────────────────────────
INPUT SETTINGS REFERENCE
────────────────────────────────────────────────────────────────────────────────
── Timeframes ──
Show 1H Toggle the 1-hour row on or off.
Show 4H Toggle the 4-hour row on or off.
Show 1D Toggle the daily row on or off.
Show 1W Toggle the weekly row on or off.
── Display ──
Show Elapsed Time Shows/hides the Elapsed Days and Elapsed Time
(Col 2) columns (cols 2–3). When hidden both cells are
rendered as blank dim cells.
Show Remaining Time Shows/hides the Remaining Days and Remaining
(Col 3) Time columns (cols 4–5). When hidden both cells
are rendered as blank dim cells.
Seconds Alert Sets the threshold in whole minutes (0–5) below
Threshold (min) which the RMNG SECS column activates. At 0 the
seconds column never appears. At 5 it lights up
during the final 5 minutes of every candle.
Table Orientation Horizontal (default) — timeframes as rows.
Vertical — timeframes as columns.
Table Position Anchor point for the table on the chart.
Options: top-left, top-center, top-right,
middle-left, middle-right, bottom-left,
bottom-center, bottom-right.
Text Size Size of text in the title row and all data
cells except the remaining-time columns.
Options: tiny, small, normal, large.
Remaining Time Independent text size for cols 4, 5, and 6
Columns Text Size (remaining days, remaining time, seconds alert).
Options: tiny, small, normal, large.
Useful for making the countdown more prominent
without enlarging the rest of the table.
── Colors ──
Bullish Background Cell background for the TF label when
close >= open on that timeframe.
Bearish Background Cell background for the TF label when
close < open on that timeframe.
Elapsed % Low (0%) The gradient start color shown when a candle
has just opened (0% elapsed).
Elapsed % High (100%) The gradient end color shown when a candle is
nearly complete (100% elapsed).
Title Background Background of the merged title row.
Header Background Background of the column header row.
Text Color Default text color used across most cells.
Text Color (Elapsed) Color of elapsed header labels and elapsed cell
text values.
Text Color (Remaining) Color of remaining header labels and remaining
cell text values.
Seconds Alert Text Text color inside the RMNG SECS cell when the
alert threshold is active.
Use Gradient on OFF (default): elapsed and remaining time cells
Elapsed/Remaining use a uniform dim background regardless of
Time Cells candle progress.
ON: elapsed time cells use the same low→high
gradient as the % column. Remaining time cells
use the inverse high→low gradient. Additionally,
the empty "Days" cells on 1H, 4H, and 1D rows
are filled with the matching gradient color
(elapsed gradient for col 2, remaining gradient
for col 4) instead of staying as dark gaps.
────────────────────────────────────────────────────────────────────────────────
TIME FORMATTING REFERENCE
────────────────────────────────────────────────────────────────────────────────
1H elapsed / remaining → MM m (e.g. 43m, 17m)
4H elapsed / remaining → HH h : MM m (e.g. 00h : 43m)
1D elapsed / remaining → HH h : MM m (e.g. 14h : 52m)
1W days column → DD D (e.g. 03D, 04D)
1W time column → HH h : MM m (e.g. 14h : 22m)
Seconds alert → SS s (e.g. 47s)
All values are floored to whole minutes or seconds; no rounding up occurs
so the display never shows a value higher than the actual remaining time.
────────────────────────────────────────────────────────────────────────────────
NOTES AND TIPS
────────────────────────────────────────────────────────────────────────────────
• The table renders only on the last bar (barstate.islast). It does not
paint on historical bars and adds no visual noise to your chart history.
• timenow is used for all live calculations, so the indicator reflects
real wall-clock time even when the chart is not actively ticking (e.g.
outside regular session hours on session-limited instruments).
• The 1H row uses a simplified lookahead=off request to avoid peeking at
future hour opens. The 4H, 1D, and 1W rows use lookahead=on so that
time_close values are correctly available on the current bar.
• For instruments with irregular sessions (futures, crypto, forex) the
1D duration is derived from the actual time_close returned by the
exchange feed, so DST and session-length variations are handled
automatically.
• If all four timeframe rows are hidden the table will still render its
title and header row. Toggle at least one timeframe on for meaningful
output.
• Setting both "Show Elapsed Time" and "Show Remaining Time" to OFF will
leave only the TF label, percentage, and seconds alert columns visible,
producing a compact minimal layout useful for small screen areas.
────────────────────────────────────────────────────────────────────────────────
VERSION HISTORY
────────────────────────────────────────────────────────────────────────────────
v1.0 Initial release. 1H/4H/1D/1W timers, gradient %, bull/bear colors,
orientation toggle, seconds alert, elapsed/remaining columns.
v1.1 Added independent text size control for remaining-time columns
(cols 4, 5, 6). Gradient fill extended to empty "Days" cells on
1H/4H/1D rows when the gradient toggle is enabled, eliminating
dark gaps and keeping row backgrounds visually consistent.
────────────────────────────────────────────────────────────────────────────────
© CQuevedo345 — Mozilla Public License 2.0
================================================================================ Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
MMM Dragon Flow 3.0MMXM Dragon Flow is a custom technical analysis indicator designed to help traders read market structure, trend direction, dynamic support/resistance, pivot zones, previous session levels, PVA volume behavior, and dashboard-based market conditions in one chart.
MMXM Dragon Flow เป็นอินดิเคเตอร์วิเคราะห์ทางเทคนิคที่ออกแบบมาเพื่อช่วยให้นักเทรดอ่านโครงสร้างราคา ทิศทางแนวโน้ม แนวรับ/แนวต้านแบบไดนามิก โซน Pivot ระดับราคาของรอบก่อนหน้า พฤติกรรม PVA Volume และสภาพตลาดผ่าน Dashboard ได้ในกราฟเดียว
Main Features / คุณสมบัติหลัก
1. Dragon Flow Trend Channel
The Dragon Flow channel is based on EMA structure and helps visualize the current market direction. It can be used to identify bullish, bearish, or sideways conditions.
Dragon Flow Trend Channel ใช้โครงสร้าง EMA เพื่อช่วยแสดงทิศทางตลาดปัจจุบัน ใช้ดูว่าราคาอยู่ในภาวะขาขึ้น ขาลง หรือ Sideway
2. Trend Line
The indicator includes a longer-term trend line to help compare current price movement against the broader market direction.
อินดิเคเตอร์มีเส้นแนวโน้มระยะยาวเพื่อช่วยเปรียบเทียบการเคลื่อนไหวของราคาปัจจุบันกับทิศทางตลาดโดยรวม
3. PVA Candles and Volume Flow
The script can color price candles and volume bars based on PVA behavior, helping traders identify normal volume, rising volume, and climax volume conditions.
สคริปต์สามารถเปลี่ยนสีแท่งราคาและแท่ง Volume ตามพฤติกรรม PVA เพื่อช่วยแยกภาวะ Volume ปกติ Volume เพิ่มขึ้น และ Climax Volume
4. Previous Session Levels
The indicator displays Previous High, Previous Low, and Previous Close levels. These levels can be used as important reference zones for possible liquidity reactions and price response.
อินดิเคเตอร์แสดงระดับ Previous High, Previous Low และ Previous Close เพื่อใช้เป็นโซนอ้างอิงสำคัญที่ราคาอาจเกิดการตอบสนองหรือเกิดปฏิกิริยาจากสภาพคล่อง
5. Expanded Pivot Support and Resistance
This version includes adjustable Pivot S/R distance. Traders can expand or reduce the distance between Pivot, R1, R2, R3, S1, S2, and S3 using the Pivot S/R Distance Multiplier.
เวอร์ชันนี้มีระบบปรับระยะห่างของ Pivot S/R ได้ นักเทรดสามารถขยายหรือลดระยะระหว่าง Pivot, R1, R2, R3, S1, S2 และ S3 ได้ผ่านค่า Pivot S/R Distance Multiplier
A multiplier of 1.00 keeps the original classic pivot levels. Values above 1.00 expand support and resistance farther away from the Pivot, which may be useful for volatile markets such as gold, indices, and crypto.
ค่า 1.00 คือระดับ Pivot ดั้งเดิมแบบ Classic Pivot หากใช้ค่ามากกว่า 1.00 แนวรับและแนวต้านจะถูกขยายออกจาก Pivot มากขึ้น เหมาะกับตลาดที่มีความผันผวนสูง เช่น ทองคำ ดัชนี และคริปโต
6. Staggered Level Labels
The script includes staggered labels to reduce label overlap when support and resistance levels are close together. This improves chart readability without changing the actual price levels.
สคริปต์มีระบบขยับตำแหน่งป้ายชื่อระดับราคาแบบ Staggered Labels เพื่อลดการซ้อนกันของป้ายเมื่อแนวรับและแนวต้านอยู่ใกล้กัน ช่วยให้กราฟอ่านง่ายขึ้นโดยไม่เปลี่ยนระดับราคาจริง
7. Gap Line
The indicator can display a session gap line based on the difference between the session open and the previous close.
อินดิเคเตอร์สามารถแสดงเส้น Gap โดยอ้างอิงจากความต่างระหว่างราคาเปิดของ Session และราคาปิดก่อนหน้า
8. Dashboard Panel
The dashboard summarizes key market information including price, trend, pivot, main plan, guardrail, nearest level, R/S levels, PVA status, range, and market notes.
Dashboard สรุปข้อมูลสำคัญ เช่น ราคาปัจจุบัน แนวโน้ม Pivot แผนหลัก จุดเฝ้าระวัง ระดับราคาที่ใกล้ที่สุด ค่า R/S สถานะ PVA Range และ Note ของตลาด
How to Use / วิธีใช้งาน
- Use the Dragon Flow channel to identify the current market direction.
- ใช้ Dragon Flow Channel เพื่อดูทิศทางตลาดปัจจุบัน
- Use the trend line to compare short-term movement with the broader trend.
- ใช้เส้น Trend เพื่อเปรียบเทียบการเคลื่อนไหวระยะสั้นกับแนวโน้มใหญ่
- Use Previous High, Previous Low, and Previous Close as important reaction zones.
- ใช้ Previous High, Previous Low และ Previous Close เป็นโซนสำคัญที่ราคาอาจเกิดการตอบสนอง
- Use Pivot, R1-R3, and S1-S3 as support and resistance reference zones.
- ใช้ Pivot, R1-R3 และ S1-S3 เป็นโซนอ้างอิงแนวรับและแนวต้าน
- Adjust Pivot S/R Distance Multiplier if the support and resistance levels are too close together.
- ปรับค่า Pivot S/R Distance Multiplier หากแนวรับและแนวต้านอยู่ใกล้กันเกินไป
- Use Stagger Level Labels to make level labels easier to read.
- ใช้ Stagger Level Labels เพื่อให้ป้ายชื่อระดับราคาอ่านง่ายขึ้น
- Use PVA volume behavior to identify rising activity or climax conditions.
- ใช้พฤติกรรม PVA Volume เพื่อดูภาวะ Volume เพิ่มขึ้นหรือ Climax Volume
- Use the dashboard as a quick market summary, not as a standalone buy or sell signal.
- ใช้ Dashboard เป็นตัวช่วยสรุปสภาพตลาดอย่างรวดเร็ว ไม่ใช่สัญญาณซื้อขายเดี่ยว ๆ
Recommended Markets / ตลาดที่เหมาะสม
This indicator can be used on forex, gold, indices, crypto, stocks, and other liquid markets. It is especially useful for intraday analysis, session-based trading, and multi-timeframe market structure reading.
อินดิเคเตอร์นี้สามารถใช้ได้กับ Forex, Gold, Indices, Crypto, Stocks และตลาดที่มีสภาพคล่อง เหมาะสำหรับการวิเคราะห์ Intraday การเทรดตาม Session และการอ่านโครงสร้างราคาหลาย Timeframe
Important Note / หมายเหตุสำคัญ
Expanded Pivot S/R levels are modified reference levels. If the multiplier is set above 1.00, the levels are no longer pure classic pivot levels. They become expanded support and resistance zones designed to improve spacing and readability in volatile markets.
ระดับ Expanded Pivot S/R เป็นระดับอ้างอิงที่ถูกปรับแต่ง หากตั้งค่า Multiplier มากกว่า 1.00 ระดับเหล่านี้จะไม่ใช่ Classic Pivot ดั้งเดิม 100% แต่จะเป็นโซนแนวรับและแนวต้านแบบขยาย เพื่อเพิ่มระยะห่างและทำให้อ่านกราฟง่ายขึ้นในตลาดที่ผันผวน
Disclaimer / ข้อจำกัดความรับผิดชอบ
This script is not financial advice, investment advice, or a solicitation to buy or sell any financial instrument. It is an algorithmic analysis and visualization tool only. Trading involves risk, and users are responsible for their own trading decisions.
สคริปต์นี้ไม่ใช่คำแนะนำทางการเงิน ไม่ใช่คำแนะนำการลงทุน และไม่ใช่การชักชวนให้ซื้อหรือขายสินทรัพย์ใด ๆ เป็นเพียงเครื่องมือช่วยวิเคราะห์และแสดงผลเชิงระบบเท่านั้น การเทรดมีความเสี่ยง ผู้ใช้งานต้องรับผิดชอบต่อการตัดสินใจของตนเอง Indicator
Indicator
Base PivotsOverviewThis indicator identifies major structural support and resistance levels based on pivot highs and lows, drawing clean, contained horizontal levels that step forward dynamically with price. Instead of running into infinite space, lines map directly to price action and freeze the exact moment a breakout threshold is breached.
To help filter out market noise and minor price fluctuations, it integrates a multi-layered verification system, ensuring only significant market turning points are displayed on your chart.
Key FeaturesPre-Pivot Trend Filter: Validates structural turning points by requiring price to make a meaningful percentage move over a chosen lookback window before a pivot line can form.
Contained Real-Time Extensions: Unbroken lines trail cleanly up to the current bar. The exact moment a breakout occurs, the line freezes and terminates strictly at that breach bar.
Dual-Mode Breakout Thresholds: Choose between a fixed Percentage breakout or a volatility-adjusted ADR/ATR Multiple to determine precisely when a support or resistance level is considered broken.
Clean Chart Proximity Merging: Automatically prevents cluttered charts by filtering out and merging new lines that form too close to already active levels.
Independent State Visibility: Includes fully flexible visibility toggles to selectively display active support, active resistance, broken support, or broken resistance lines.
Dynamic Information Labels: Displays the precise price level, how many chart bars the level has survived, and the maximum adverse excursion (depth percentage) reached during the line's lifespan
How It Works (Under the Hood)
Detection: The script scans historical price data using a user-defined left/right strength lookback window to isolate pivot wicks.
Pre-Trend Check: It assesses the trend run-up or run-down leading to the pivot. If the move is less than the user-configured percentage, the pivot is completely ignored.
Tracking & Breakdown Loops: Validated lines are stored in real-time array structures. On each bar, it computes volatility metrics. If a candle closes past the boundary (plus your ATR or percentage cushion), the level converts into a historical broken state instantly.
User Inputs Guide
Lookback: Distance needed to confirm a high or low peak.
Pre-Pivot Change Threshold (%): Minimum percentage run required prior to validation.
Max Active Lines: Limits the total number of unbreached lines drawn on your screen.
Style Toggles: Fully customize line styles (Solid/Dotted/Dashed), font sizing, visual offsets, and visibility blocks for broken versus active states. Indicator
Indicator
Indicator
X Trading Auto-Pilot V2.0Welcome to X Trading Auto-Pilot V2.0 — the ultimate minimalist trading system designed for traders who want zero chart clutter and 100% execution clarity.
We stripped away the noise, removed the complex lines and bands, and built a highly accurate, automated signal engine optimized strictly for the 15-Minute timeframe.
🌟 Core Features:
1. Zero Clutter, Pure Action
Analysis paralysis is the enemy of profitability. This indicator removes all visual noise from your chart. You will only see the institutional macro trend and the exact entry signals.
2. High-Accuracy 15m Engine
By locking the algorithm to the 15-minute chart, we eliminate the random algorithmic wicks of the lower timeframes. The engine runs quietly in the background, measuring hidden market exhaustion (RSI/ATR alignment) and waiting for high-volume engulfing candles in the direction of the macro trend.
3. Automated Trade Management
When a signal triggers, the script instantly calculates a mathematically perfect 1:2 Risk-to-Reward ratio based on current market volatility. It plots a clean, visual box on your chart detailing your exact:
💰 ENTRY Price
😢 STOP LOSS Price
🔥 TARGET (Take Profit) Price
4. Bot-Ready JSON Alerts (Fully Automated)
Want to trade hands-free? The alert system has been re-engineered to output clean, structured JSON webhooks. Whether you use 3Commas, Cornix, or your own custom trading bot, the indicator sends perfectly formatted data instantly:
{"Action": "BUY", "Asset": "BTCUSDT", "Entry": 65120.50, "SL": 64800.00, "TP": 65760.50}
5. Universal Asset Compatibility
This Auto-Pilot suite dynamically adapts its risk math to the asset you are trading. Fully compatible with: EURUSD, USDCAD, BTCUSDT, ETHUSDT, XAUUSD, XAGUSD, US100, WTI, and DXY.
How to get access:
This is a premium, Invite-Only system locked exclusively for the X Trading community.
📲 To request access, ask questions, or see how we automate these trades, reach out to me on TikTok: @xtrading38 Indicator
Strategy
X Trading Universal L3 - Liquidity & Order FlowWelcome to the pinnacle of algorithmic scalping: X Trading Universal L3.
This indicator bridges the gap between Smart Money Concepts (SMC) and Level 2 Order Flow (Bookmap-style liquidity tracking). It has been mathematically engineered from the ground up to dynamically scale its risk engine across the world's most heavily traded institutional assets.
🌐 Universal Asset Compatibility
This suite is locked and optimized strictly for the 5-minute timeframe on the following premium assets:
Forex: EURUSD, USDCAD, DXY
Crypto: BTCUSDT, ETHUSDT
Commodities: XAUUSD (Gold), XAGUSD (Silver), WTI (Oil)
Indices: US100 (Nasdaq/NDX)
🌟 Level 3 Core Mechanics:
1. Simulated Order Flow & Liquidity Pools
We bring Level 2 book data visualization directly to your chart. The L3 engine actively scans for overlapping structural pivots to map out dense concentrations of institutional limit orders.
Watch price gravitate toward these dashed Liquidity Bands to hunt stops before reversing.
2. Dynamic ATR Risk Scaling (Universal Engine)
You no longer need to adjust inputs when switching from Crypto to Forex. The mathematical engine reads the real-time True Range (ATR) of the asset you are viewing and dynamically builds your Stop Loss and Take Profit boxes to perfectly fit that exact market's pip/tick volatility.
3. The L3 Sniper Signal Matrix
Signals are highly filtered and only trigger when three institutional factors align:
Macro Alignment: Price must be trading with the 1-Hour Institutional Trend.
Liquidity Sweep: Price must sweep a major L3 Liquidity Pool or structural Order Block.
Volume Imbalance: A massive engulfing candle must confirm the market makers are stepping in.
When these align, you receive the exact 💰 Entry, 😢 Stop Loss, and 🔥 Take Profit zones drawn beautifully on your chart.
4. Advanced Trade Management (Breakeven Tech)
The live Win Rate dashboard doesn't just track raw wins and losses. It features professional trade management: if a trade reaches 50% of the Take Profit target, the algorithm internally moves your Stop Loss to Breakeven, protecting your capital and accurately updating your win rate stats.
5. The X Trading Dashboard & Market Rhythm
Live Session Overlays: Clean background shading for Asia, London, and NY sessions.
Market Rhythm: Real-time dashboard tracking of the 1H trend, current active asset, live ATR volatility, and overall daily range.
How to get access:
This is a premium, Invite-Only system locked exclusively for the X Trading community.
📲 To request access, ask questions, or watch this system dominate live in action, reach out to me on TikTok: @xtrading38 Indicator
Indicator
Indicator
X Trading - BTCUSDT Master SuiteWelcome to the X Trading Master Suite BTCUSDT ONLY— a complete, all-in-one algorithmic trading system engineered specifically for high-probability scalping and day trading.
Built around the core concepts of Smart Money Concepts (SMC), market rhythm, and the AMD (Accumulation, Manipulation, Distribution) cycle, this suite gives you institutional-level context directly on your chart without the clutter.
🌟 Core Features:
1. The X Trading Dashboard (Live Rhythm Tracking)
Never second-guess market conditions again. The live dashboard tracks the current trading session (Asia, London, NY), the 1-Hour macro trend, today's total range ($ move), and the exact market state (Break vs. Retest) so you know exactly when to execute.
2. Institutional SMC Matrix
The algorithm automatically tracks major liquidity zones in real-time:
Order Blocks (OB): Dynamic support and resistance boxes drawn from structural pivots.
Fair Value Gaps (FVG): Auto-detected market imbalances showing where institutions left unfilled orders.
3. Precision Signals with Automated Risk Management
When a highly filtered, institutional liquidity sweep aligns with market momentum, the indicator fires a Sniper Buy/Sell signal. It instantly plots:
💰 Exact Entry Line
😢 Dynamic Stop Loss (SL) and an Extended SL (🛡️) for high volatility.
🔥 Target Take Profit (TP) Box: A visual "ghost candle" showing the exact zone to take profits.
🚀 Runner Target: For extended momentum plays.
4. Market Rhythm & Momentum
Session Backgrounds: Clean, transparent overlays showing the Asian, London, and NY sessions.
Double Bollinger Band Faint Overlays: Visually identifies when the market is ranging, breaking out, or retesting the mean.
EMA Ribbon (8/34) & Moving Averages: A custom momentum ribbon fill paired with the 50, 100, and 200 EMAs to keep you on the right side of the trend.
Early Exit (X Marks): If momentum shifts sharply against your trade, the algorithm prints a visual "X" to warn you to secure profits early.
5. Automated Alert System
Fully compatible with PulseWire alerts. Receive exact Entry, SL, and TP prices directly to your device the second a setup occurs, as well as high-momentum session open warnings.
How to get access:
This is a premium, Invite-Only system locked for the X Trading community.
📲 To request access, ask questions, or watch this system dominate live in action, reach out to me on TikTok: @xtrading38 Indicator
Schrodinger Zone Probability [JOAT]SCHRÖDINGER ZONE PROBABILITY
The most quantitatively ambitious indicator in the JOAT suite. Detects Fair Value Gaps and Order Blocks the way a serious SMC engine should — and then, before they are touched, treats each one as a superposition zone with two simultaneous probabilities: P_S (the probability it will act as Support when revisited) and P_R (the probability it will act as Resistance). The two probabilities sum to one. The zone exists in a superposition of both states until price actually touches it; at that moment the wavefunction collapses to a single classical state — S or R — driven by the bars-after-touch confirmation logic. Then the script tags the zone with the committed direction and archives the collapse.
Detection — FVGs and OBs done properly
Two independent zone types feed the superposition engine:
Fair Value Gaps — the standard 3-candle imbalance definition, ATR-filtered (minimum gap = configurable × ATR, default 0.30×) so only meaningful gaps qualify. Bull and bear FVGs both detected.
Order Blocks — three methods exposed:
Last Opposite — latest opposite-color candle before displacement.
Extreme Opposite — most extreme (lowest low / highest high) candle in the walk-back window.
Strict Volume — Last Opposite filtered by volume above MA.
Displacement (the move that creates the zone) requires a body of displacement ATR multiple × ATR (default 1.20×). A configurable walk-back window controls how far back to search for the OB origin. Configurable mitigation rule (Wick = any pierce, Close = bar must close beyond).
The headline math — three-factor superposition probability
The collapse probabilities P_S / P_R are computed as a weighted blend of three orthogonal factors:
Distance factor — distance from current price to the zone, decayed exponentially with a configurable half-life in ATR units (default 2.0 ATR). Closer zones have higher commit probability.
Direction factor — which side of the zone current price is on. Above the zone leans the read toward Support collapse; below leans toward Resistance.
Flow factor — EMA-slope alignment over a configurable flow window (default 20 bars). Bullish flow biases toward Support; bearish flow biases toward Resistance.
Each factor's weight is independently tunable. Defaults (0.45 distance / 0.30 direction / 0.25 flow) are the script's institutional calibration. The output is two probabilities that sum to 1.
A zone with P_S ≈ P_R ≈ 0.5 is in pure superposition — the model is genuinely undecided. A zone with P_S = 0.85 / P_R = 0.15 is in a state nearly committed to Support; the wavefunction has already partly collapsed.
Wavefunction collapse — the engine's headline event
When price enters the zone within a configurable touch tolerance (default 0.05 × ATR slack) and holds inside for the configurable holdBars window (default 3 bars), the zone collapses to a single classical state:
Collapse to S — price bounced; the zone acted as Support. Marker prints "(+)→S" at the centroid.
Collapse to R — price was rejected from the other side; the zone acted as Resistance. Marker prints "(+)→R".
A configurable connector line is drawn at the committed level. Collapsed zones are optionally archived (default ON) so the chart shows the full history of how superpositions resolved.
Visual system — superposition rendering
Vertical gradient fill — each zone is rendered as a stack of N sub-boxes (configurable, default 8 slices) with progressive transparency, creating a vertical gradient that visually communicates "high probability of support at the bottom of the zone, high probability of resistance at the top". This is the script's signature visual.
Glow border — configurable glow intensity; becomes thicker when uncertainty is high (P_S ≈ P_R).
Animated superposition pulse — for zones in pure superposition (P ≈ 0.5), transparency oscillates with bar_index to indicate undecided state. Configurable period and amplitude.
Probability labels — P_S / P_R values printed on each active zone.
Zone type tags — FVG_BU, FVG_BE, OB_BU, OB_BE so origin is unambiguous.
Collapse markers — fancy glyphs (+)→S / (+)→R or plain S / R, configurable.
Show-only-superposition mode — hide collapsed and archived zones for a minimalist view.
Right extension — zones project a configurable number of bars to the right.
A locked institutional palette (cyan-teal bull / magenta bear) gives the chart a distinctive quantum-finance identity.
Dashboard
Monospaced table positionable to any of nine corners. Surfaces:
Active superposition zone count and archived count.
Nearest zone with its P_S / P_R values and distance.
Last collapse direction with bars-ago.
Current flow direction.
Detection thresholds and weights in use.
Mitigation rule.
Alerts
Multiple alert conditions:
New Superposition Zone Created (FVG or OB)
Collapse to Support
Collapse to Resistance
Approaching Zone (within collapse-touch tolerance)
High-Uncertainty Zone formed (P_S ≈ P_R ≈ 0.5)
How to read it
Three reads, in order of conviction:
Collapse alert with extreme one-sided probability — e.g. a zone with P_S = 0.85 collapses to S. The model was confidently pointing at one outcome, and the market confirmed it. The highest-conviction confluence read the script produces.
Approaching a zone with sharp probability bias — when P_S or P_R is dominant before touch, the model is committed to one direction. Position toward the dominant side; if the collapse confirms, you are in early.
High-uncertainty zone (P ≈ 0.5) — stand-aside signal. The model is genuinely undecided; trade only with strong external confluence (HTF structure, news flow) or skip the zone entirely.
Suggested settings
Defaults (FVG ATR 0.30×, displacement 1.20×, OB Last-Opposite, 15-bar walk-back, weights 0.45 / 0.30 / 0.25, half-life 2.0 ATR, 3-bar hold) are tuned for 15m–4H on liquid markets. For lower timeframes drop displacement to 1.0× and hold to 2. For HTF raise FVG ATR to 0.50× to keep only large gaps. The weights are calibrated together — change one and the others rebalance the probabilities; experimenting with the weights is a legitimate way to specialise the script to your instrument.
Originality
The implementation — the dual-source zone detector (FVG + OB) with three OB methods, the three-factor probability blend (distance / direction / flow) with independent weights, the exponential ATR-halflife distance decay, the touch-with-hold collapse-confirmation state machine, the vertical-gradient zone render using N stacked sub-boxes, the uncertainty-modulated glow border, the animated superposition pulse for high-uncertainty zones, the archive-on-collapse logic, and the dashboard's probability-aware layout — is JOAT-original. No third-party code reused. The Schrödinger framing (superposition → collapse) is the original conceptual contribution; the math is purpose-built.
Limitations
The "probability" output is a heuristic blend of three factors that historically correlate with which side a zone acts as — it is a ranked confidence, not a true Bayesian posterior. The factor weights are exposed precisely because no single weighting is universally correct. The collapse confirmation requires the holdBars window to elapse, so collapse markers lag the actual touch by that window (intentional — single-bar pierces should not commit a zone). The animated pulse for high-uncertainty zones is purely visual.
-made with passion by jackofalltrades
Indicator
