PulseHub
Get started

Average

Arch1tect's New ToyDescription: Arch1tect's New Toy tries to predict market trends by simply utilising 2 moving averages crossovers. How it works: Buy signals are triggered when the faster MA crosses over the slower MA from the downside to the upside. Sell signals are triggered when the faster MA crosses under the slower MA from the upside to the downside. How to use: Take buys when buy signal is triggered AND close existing sell position Take sells when sell signal is triggered AND close existing buy position Note: Settings are optimised for XAUUSD on the M1 chart. Extra: Alerts are included. You can toggle between EMA , WMA and SMA to your liking. Strategy Tester version:
Indicator
by Tutorial05
5
ADR: Average Daily RangeVery basic script... adjust the EMA to 13 for stocks, and less volatile assets. 26 for crypto, and anything highly volatile. When the Daily Low line (bottom yellow/orange line) dips hard, and finds support for 3+ bars somewhere, this is a sign of a trend reversal. For a solid confirmation, wait for the Super Average and EMA to spike downwards as well. All of this can also be seen as reversal at the top of a trend, just upturned. The 2 Daily lines (2 yellow/orange lines) act as support for the price to bounce off of. Fine tuning is required to get these really smooth, but it's a simple enough idea. Edit: Screwed up the EMA in my posted example. Should be 26.
Indicator
by cattledoger
1
Arch1tect's New Toy (Strategy Tester Version)Description: The version of Arch1tect's New Toy indicator with Strategy Tester added. This indicator tries to predict market trends by simply utilising 2 moving averages crossovers. How it works: Buy signals are triggered when the faster MA crosses over the slower MA from the downside to the upside. Sell signals are triggered when the faster MA crosses under the slower MA from the upside to the downside. How to use: Take buys when buy signal is triggered AND close existing sell position Take sells when sell signal is triggered AND close existing buy position Note: Settings are optimised for XAUUSD on the M1 chart. Extra: Alerts are included. You can toggle between EMA, WMA and SMA to your liking. Indicator version:
Strategy
by Tutorial05
2
Papercuts Dynamic EMA - Relative Parameter FunctionThe goal of this is to link two parameters of different known low and high values so one affects the other. In this case, I want to link Relative Volume to the length of an EMA, so it responds faster in times of high volume. As an animator I am used to linking values in this way with Maya using a set driven key, took some work to figure it out in pine. Looking up this concept, it has a few names, Relative values, linear interpolation, or rescale values. Thanks to pinecoders for writing the EMA funciton that can accept length variables! Here's a quick look at the root function to link the two values. f_relativeVal(_source, in_bot, in_top, out_bot, out_top) => // float _source: input signal // float in_bot : minimum range of input signal. // float in_top : maximum range of input signal. // float out_bot : minimum range of output signal. // float out_top : maximum range of output signal. clampSrc = _source > in_top ? in_top : _source < in_bot ? in_bot : _source //claps source to create a controlled range //relInput = (clampSrc - in_bot) / (in_top - in_bot) * 100 inDiffIncrement = (in_top - in_bot) outDiffIncrement = (out_top - out_bot) out_bot + (clampSrc - in_bot) * outDiffIncrement / inDiffIncrement // rescale input range to output range
Indicator
by PapercutsTrading
8
Complete MA DivisionThis indicator simply divides two moving averages and calculates the slope of the resulting curve to show when an asset's momentum is slowing down. The original idea was in a recent youtube video by Ben Cowen . His indicator didn't show the complete history of the moving average, so I wanted to try a little trick to get the moving averages at the beginning of time even when using a large moving average period. I accomplished this by counting the number off current bars using the cum() function. After the count is hit, the period will be constant. Changing the curve smoothing will smooth the actual curve. Both moving average periods should be divisible by the curve smoothing. Changing the slope smoothness will dictate when the slope is starting to slow down. Keep this high to break through the noise. Start of Red = Good time to sell Start of Green = Good time to buy There is a weird issue with the smoothness of the line so just keep your moving averages divisible by the curve smoothing. I couldn't figure that issue out yet.
Indicator
by OrionAlgo
2
Multi-Length Stochastic Average [LuxAlgo]This indicator returns the average of stochastic oscillators with periods ranging from 4 to length . This allows for a slightly more reactive oscillator as well as having information regarding the position of the price relative to rolling maximums/minimums of different periods. We introduce settings that allow for pre and post-smoothing, with selectable smoothing methods and periods for both steps. Settings Length: Period of the indicator, determine the maximum period of the stochastic oscillator used in the average Source: Source input of the indicator Pre-Smoothing (1st Input): Degree of smoothing applied to the source input Pre-Smoothing (2nd Input): Pre-Smoothing Method Post-Smoothing (1st Input): Degree of smoothing applied to the final oscillator output Post-Smoothing (2nd Input): Post-Smoothing Method Smoothing methods include a simple moving average, a triangular moving average, and a least-squares moving average (this method can induce overshoots during the post-smoothing step). The user can also select "None". Usages The "multi-length" aspect of technical indicators is something that hasn't been deeply explored yet such indicators can give us information regarding both short-term and long-term information which was the motivation for the creation of the indicator. The Multi-length Stochastic Average allows us to quantify the price position relative to a multitude of highest/lowest levels. In the example above the oscillator returns the average of stochastic oscillators with periods ranging from 4 to 20, as well as multiple rolling minimums with periods ranging from 4 to 20. We can see that when the price is equal to all rolling minimums the oscillator is equal to 0, the oscillator would return 100 if the price were equal to all rolling maximums with periods in that same range. The oscillator can be interpreted like any scaled oscillator and can be used to estimate trend direction as well as trend strength. Here we only make of use pre-smoothing by using a period 20 simple moving average. The indicator graphical elements such as colors/circles can help us determine potential directions trends might take. Circles are displayed when the oscillator crosses over/under the 20/80 level. Such conditions offer better timing than waiting for the oscillator to be greater/lower than 50 and are less subjective to noise than simply looking at the direction taken by the oscillator. However, it can suffer from potential retracements in a trend more easily, this is illustrated in the chart above.
Indicator
by LuxAlgo
11
Average Highest High and Lowest Low Swinger StrategyThis is a full price action strategy designed for trending markets such as crypto and stocks. Its purely made on calculations for the highest high and lowest low using 2 different length , a faster and a slower one. With those we make multiple averages. Rules for entry: For long: our close of the candle is above both the average using fast and slow line For short: our close of the candle is below both the average using fast and slow line Rules for exit We always exit when we have an opposite order Caution This strategy use no risk management system, so be careful with it If you have any questions, let me know
Strategy
by exlux
Trend System Multiple Moving Averages RatingThis is a trend system made with multiple moving averages designed especially for trending markets such as stocks or crypto. It can be used with any timeframe. Its made of multiple moving averages such as Simple Weighted Volume Weighted Exponential Double EMA Arnaud Legoux Hull MA Smoothed Least Squares Kaufman Adaptive Triple EMA Zero Lag Fractal Adaptive Variable Index Dynamic Average Jurik Moving Average Tillson Triangular Avg of all moving averages It has also a rating, making an avg from all of the moving averages , going from -100 (all ma's are telling to go short ) to 100 ( all ma are telling to go long). If you have any questions let me know !
Indicator
by exlux
14
Swing/Scalper HULL + T3 avg Crypto StrategyThis is a both a swing and a scalper strategy(depends on the timeframe that you use), that works with all timeframes, however I noticed that with swing 3h works the best on most crypto pairs, such as ETH, BTC and so on. Its main components are: Hull moving average T3 moving average Risk management With them I make an average and use it as the main moving average. Rules for entry For long: Average moving average is bigger than previous average moving average value. For short:Average moving average is lower than previous average moving average value. Rules for exit We exit when either the TP/SL has been hit, or when we get a different condition than previous one(both for long and short). If you have any questions, let me know !
Strategy
by exlux
15
Moving Average Ribbon [TheBearFighter] This code was written using: •Pine Script Coding Conventions. This script provides a very useful tool for new community users and professionals. It puts at your disposal a Moving Average Ribbon by hand to graph and easily find the ones with the highest performance. The creation of this script was motivated because in free PulseWire accounts there is a limit of 3 indicators by chart, and with this tool you can draw up to 32 MA's at the same time! Choose one of 10 types of MA´s: •KAMA Kaufman's moving average. •HULL Hull moving average. •TEMA Triple exponencial moving average. •LSMA Least square moving average. •DEMA Double exponencial moving average. •ALMA Arnaud Legoux moving average. •WMA Weighted moving average •EMA Exponencial moving average. •VWMA Volume Weighted moving average. •SMA Simple moving average. Use the tooltips to know the lengths of MA´s. A main characteristic of the script is that the lengths are in days but when changing the lowest timeframes, the same daily resolution is maintained. This gives us extreme precision in intraday timeframes, e.g 30 minutes. Once this is understood, we can turning the MA´s on/off, and changing the timeframe to our liking. Available timeframes: M, W, D, 4H, 1H, 30m, 15m, 5m. Also the MA´s are colored for easy visualization and know if they grow or decrease. Thank´s to @midtownsk8rguy to let me know more about HEX colors. Thank´s to @HPotter for his KAMA.
Indicator
by TheBearFighter
Supertrend BandsSupertrend Bands What is the Supertrend indicator? "The Supertrend indicator is a trend following overlay on your trading chart, much like a moving average, that shows you the current trend direction. The indicator works well in a trending market but can give false signals when a market is trading in a range. It uses the ATR (average true range) as part of its calculation which takes into account the volatility of the market. The ATR is adjusted using the multiplier setting which determines how sensitive the indicator is." "For the basic Supertrend settings, you can adjust period and factor: - The period setting is the lookback for the ATR calculation - Factor is the what the ATR is multiplied by to offset the bands from price" How to use this indicator This indicator is inspired by a strategy I found. It includes four Supertrend indicators, each with different settings that displays trend strength and support/resistance zones. The default settings are optimal for cryptocurrency but do work quite well for traditional also. I highly recommend you try experimenting with different settings, increasing them to suit the instrument. The bands are set from low to high, Band 1 being the fastest and Band 4 being the slowest. Band 4 is the one that sets the overall trend so when price is above Band 4, the trend is bullish and vice versa. Trend is strongest when price is above/below Band 1 and gets weaker as it filters through each band. Band 4 provides the strongest support/resistance and if that breaks the trend flips. In the menu, you will see an option called "Remove Anti Trend?". It is enabled by default and it removes any bearish/resistance bands when the trend is up and any bullish/support bands when the trend is down. When turned off, it will show all Supertrend Bands as they are by default. Bar Colors Bar colors are optional and they reflect the current trend strength based on the Supertrend bands. Alternate ways of using this indicator You could leave everything as default or you can display individual bands. For instance, because I use many overlay indicators, most of the time I turn off all the bands and only show bar colors: You can also turn off Bands 1 and 2 and only show the two slowest lengths: This removes the noise of the two faster Supertrends. Or just show the two fastest bands: Any suggestions to improve this indicator are most welcome :)
Indicator
by Shanxia
10
Tradingview ToolkitA new trader's biggest barrier to entry is lack of understanding where they are in terms of time and price and with pulsewire free they are often limited to just 1 or 2 extra indicators as many new traders slap on RSI and MACD as 2/3 free ones. While these indicators are fine for trend analysis, its important to know where the price is in relation to time. Thus, this all-in-one script is meant to have a lot of customizable utility to save on indicator spots and act as a hotspot for many common needs. -2 Sets of VWAP line w/ standard deviation bands with customizable timeframes. -1 more customizable timeframe VWAP line (no std dev bands) to use as a long time frame reference -Ability to plot previous VWAP close prices over current timeframe on all VWAP lines w/ basic color changing if price closes above/below -2 Sets of Bollinger Bands with customizable source length and MA type -3 customizable moving averages with custom timeframe/resolutions -Inside candle barcolor repainter to easily notice if a candle was inside the range of the previous candle (price contraction) Not meant to have everything on at once, but simply a place to enable and disable different things and save spots for more important things
Indicator
by imbes
2
Moving Average Buy/Sell IndicatorUsing a selected Exponential Moving Average (EMA)/Simple Moving Average (SMA) range, this indicator inserts a Long/Short (buy/sell) indicator overlaid on chart depending on the following conditions: - LONG/BUY SIGNAL = if SMA value is less than EMA, and both the SMA and EMA are less than the current average price. - SHORT/SELL SIGNAL = if SMA value is greater than EMA, and both the SMA and EMA are greater than the current average price. **Intended for use with the 21 and 34 weekly moving average time range. Much more useful for long-term analysis rather than short-term analysis.**
Indicator
by EightBallDuVal
2
Moving Average Crossover with Shading Signals This script uses 3 moving averages (2 simple moving averages and 1 exponential moving average ) to signal long and short opportunities based on moving average crossovers. A long SMA (Signal SMA2) is used to determine longer term trend. When the EMA crosses above the Slow SMA1 and price is above the Signal SMA2. The space between the moving averages will shade green and the Signal SMA should also be green. A sell signal occurs when the EMA crosses below the Slow SMA1 and price is below the Signal SMA2. The space between the moving averages will turn red and the Signal SMA should also be red. A retracement, consolidation, or reversal may be occurring if the shaded color is yellow. Use the identifying shapes to learn when to open or close positions.
Indicator
by Decam9
13
Real-time market data and financial news In-depth global business and economic analysis Live stock quotes and portfolio tools
Link Terkait
Live stock quotes and portfolio tools
Comprehensive trading education and market insights