Weighted

Coppock Curve This indicator was originally developed by Edwin "Sedge" Coppock (Barron's Magazine, October 1962). Specially for @AlexMayorov : 1) Buy when indicator crosses the zero line upside 2) Sell when indicator crosses the zero line downside

Indicator

Henderson Weighted Moving Average Henderson Weighted Moving Average script. This indicator was originally developed by Robert Henderson in 1916 (Transaction of Actuarial Society of America, 17, pp. 43-48: Note on Graduation by Adjusted Average).

Indicator

Spencer 21-Point Moving Average Spencer 21-Point Moving Average script. This indicator was originally developed by John Spencer in 1904 (J.I.A. 38, 334: On the graduation of the rates of sickness and mortality presented by the experience of the Manchester Unity of Oddfellows during the period 1893 - 1897).

Indicator

Spencer 15-Point Moving Average Spencer 15-Point Moving Average script. This indicator was originally developed by John Spencer in 1904 (J.I.A. 38, 334: On the graduation of the rates of sickness and mortality presented by the experience of the Manchester Unity of Oddfellows during the period 1893 - 1897).

Indicator

Mtu Macd alertcondition added to script so u ll be able to put an alert when macd goes down or up to get alert from price movement up or down when you are on indicator right click via mouse add alert select mtu macdleader then select macd go up for buy signal select macd go down for sell signal use 4 hour or daily time frame for accurate results, also works better on down trend or uptrend not trade range because macd is a trend oscilator lower time frame works too but u ll get to much alert and noise no need if u rent a daytime trader

Indicator

Hamming Windowed Volume Weighted Moving Average Applying a window to the filter weights provides sometimes extra control over the characteristics of the filter.In this script an hamming window is applied to the volume before being used as a weight.In general this process smooth the frequency response of a filter. Lets compare the classic vwma with hamming windowed vwma Something i noticed is that windowed filters depending on their period ( high ones in general ) tend to make less bad crosses with the price ( at least with the hamming window ) Here are some data regarding number of crosses with period 50 with the hamming vwma in orange and the classic vwma in purple Feel free to use the hamming window when using weighted filter.

Indicator

Three Moving Averages This is simply three moving averages in the same indicator, with the possibility to change the source, length, offset and type on every moving average (Simple, Exponential, Weighted, Volume-weighted, Triple EMA or a moving average that uses RSI ). If you want to disable any of the moving averages, then do that under the "Style"-tab by unchecking the box for that moving average.

Indicator

BTC World Price: Multi-Exchange VWAP BTC World Price: Multi-Exchange VWAP __________________________ WHAT IT DOES What you see above are not Bitmex candles, but this indicator's. Bitcoin is listed on multiple exchanges. Many people have called for a single global index that would quote BTC price and volume across all exchanges: this script is such a virtual aggregate (formerly: Multi-Listed , Volume-Weighted Average Price ). It will, independently for each tick, for any time-frame: - Quote the price (O, H, L, C) and volume from Bitfinex (USD), Binance (USDT), bitFlyer (Yen), Bithumb (S. Korean Won), Coinbase (USD), Kraken (EUR) and even Bitmex (USD Contracts). - Weight each price with the corresponding volume of the exchange. - Quote the FOREX conversion rate in USD for each currency (USDJPY etc.) - Finally return global average price (candles) in USD. - Additionally provide (H+L)/2 etc. values. No more "on Coinbase this" or "on Bitstamp that", you've now got a global overview! See CoinMarketCap: Markets for reference. I've included alternative exchanges in the comments at the top of the script. __________________________ HOW TO USE IT Basically just add it to your chart and use the indicator's candles instead of the chart's main ticker. By default, BTC World Price will display candles only, but you can also display OHLC & averages (in whichever style you want). You may indeed want to hide the main symbol (top-left corner, click the 'eye' button next to its name), or switch it to something else than candles/bars (e.g. line). Make sure "Scale Price Chart Only" is disabled if you want to use the auto-zoom feature. (if other indicators are messing your zoom, you can try to select "Line with Breaks" or "Area with Breaks" to allow these to overflow from the main window) By clicking the triangle next to the indicator's name, you can select "Visual Order" (e.g "Bring to Front"). You can select regular Candles or Heikin-Ashi in Options. In the Format > Inputs tab, you can select which exchanges to quote. By default, all of them are enabled. The script also exposes the following typical values to the backend, which you can use as Price Source for other indicators: (e.g. MA, RSI, in their "Format > Input" tab) Open Price (grey) High Price (green) Low Price (red) Close Price (white) (H + L)/2 (light blue) (H + L + C)/3 (blue) (O + H + L + C)/4 (purple) They are all hidden by default (by means of maximum transparency). In the Format > Style tab, you can change their color, transparency and style (line, area, etc), as well as uncheck Candles and Wicks to hide these. If you are using "Indicator Last Value" and want to clear the clutter from all these values, simply uncheck them in Style. They will still be available as Price Source for other indicators. You can also choose to scale it to the left, right (default) or "screen" (no scaling). Once you're satisfied with your Style, you may click "Default"> "Save as default" in the botton-left. Everytime you load the indicator, it will look the same. ("Reset Settings" will reset to the script's defaults) __________________________ Please leave feedback below in comments or pm me directly for bugs and suggestions.

Indicator

Elastic Volume Weighted Moving Average Elastic Volume Weighted Moving Average indicator script. This indicator was originally developed by Christian P. Fries (Technical Analysis of Stocks & Commodities, June 2001).

Indicator

Sine Weighted Moving Average Sine Weighted Moving Average indicator. The result is very similar to the Triangular Moving Average.

Indicator

Volume Weighted Average Range Bands [DW]This is an experimental study designed to identify the underlying trend bias and volatility of an instrument over any custom interval PulseWire supports. First, reset points are established at points where the opening price of the interval changes. Next, Volume Weighted Average Price (VWAP) is calculated. It is the cumulative sum of typical price times volume divided by the cumulative volume. The cumulation starts over upon each reset point. After that, Volume Weighted Average Range (VWAR) is calculated. The formula structure is the same as VWAP, except using range rather than typical price. Lastly, the bands are calculated by multiplying the VWAR by the specified multiplier (approximate Golden Ratio by default) and by 1 through 5, then adding to and subtracting from the VWAP. Custom Bar Colors are included.

Indicator

Stratus [DW]This is an experimental study designed to identify trend activity, and potential support and resistance areas. First, Coefficient of Variation Weighted Moving Average (COVWMA) is calculated, and its intersection points are used as anchor values. Next, a fast period COVWMA calculated for a signal line. For the cloud, its mid level is calculated first by taking the median of the range between price and the last anchor value. The upper and lower cloud values are calculated by slicing the range in half two more times on each side. The result looks similar to stratus clouds, hence the name. Finally, the result is offset by half of the specified period. Custom bar colors are included.

Indicator

Volume Price Spread Analysis 2 With the same idea of the VPSA i make the VPSA2 to make Heiken Ashi style synthetic graph of the price and the volume effect, its easy to see the volume trends. Each instrument have a more clear time frame to see the volume patterns. I see very useful like a secondary analysis layer. in the graph show the same RSI with price and VPSA2 like source. Can use others indicators over the VPSA, only write in CAPITAL letters open, high, low, close or hl2 at inputs section. Ideas, corrections & comments. They are always welcome.

Indicator

Volume Price Spread Analysis With the same idea of the VSA i make the VPSA to make synthetic graph of the price and the volume effect, its easy to see the volume trends. Each instrument have a more clear time frame to see the volume patterns. Can use others indicators over the VPSA, only write in CAPITAL letters open, high, low, close or hl2 at inputs section.

Indicator

Indicator420 double hull moving average crossover hull moving average / volume weighted moving average crossover Red dot = SELL Green dot = BUY or Longest MA color change to green = BUY Longest MA color change to red = SELL by SeaSide420

Indicator

4MA Strategy Uses 4 Ma cross... Double Hull Moving Averages Volume Weighted Moving Average Weighted Moving Average <<<<< by SeaSide420 >>>>>>

Strategy

Volume Weighted Market Mean 3.0 [Dia]150924 - v3.0 This script is a complete rewrite of the previous version here . It gathers market data from up to 8 different Bitcoin exchange pairs (8 is maximum due to script limitations).The influence of each single exchange can be customized individually, default is 50% for 0-fee exchanges, 10% for futures and 100% for all others. For each single exchange a standard deviation from the composite mean price and a average price range are determined. To make data from exchanges with different liquidity comparable, all single exchange price ranges are normalized to the range of the composite mean price. To make data from exchanges with different fee structure (= exchanges that constantly trade at a premium / discount) comparable, all single exchange prices are corrected by their respective standard deviations. To account for trade volume, all price data is weighted by the current candles volume. - optional Heikin Ashi candle display - optional EMAs - lots of switches to play around with ;-)

Indicator

The Volume-Weighted MACD Histogram The related article is copyrighted material from Stocks & Commodities 2009 Oct

Indicator

In-depth global business and economic analysis Comprehensive trading education and market insights