TGIF Weekly Retracement+ (M1D)TGIF "Thank God It's Friday"-
Is a weekly retracement model taught by ICT. It is day-specific: it appears once a week, on Friday. Once the week has expanded and delivered into a higher-timeframe objective, Friday's job is not more expansion but a retracement back inside the weekly range — roughly 20-30% of that range given back before the weekly close. Structurally it is the distribution phase of the weekly Power 3.
This script measures the range and maps the draw. It takes no directional opinion of its own.
THE RANGE-
The weekly range is the lowest low of the week up to its highest high. Both anchors are weekly extremes, so the percentages are cut from the weekly range itself.
Direction comes from the sequence of those two extremes. Whichever printed later is the terminus the retracement runs back from; the opposite extreme is the origin. A week making higher highs into Friday is measured low to high; a week that topped midweek and sold off into Friday is measured high to low. The read refreshes on every confirmed bar, so a week that re-expands and takes its other side flips the measurement with it.
THE PRECONDITION-
The model expects price to have already delivered into a higher-timeframe premium array in a bullish week, or a discount array in a bearish week. Without that the week can keep expanding and close on its extreme with no retracement at all. It is the condition that separates the two, so it is checked rather than assumed, and enforced by default.
Monthly, Weekly and 3D are scanned. Each keeps at most one discount and one premium array, the most recent to pass validation. Two kinds of void qualify: a three-candle displacement gap, where an order block registers only if its displacement left a gap and the gap only registers if it clears a height floor with a real body behind it; and the void across a candle boundary, from one higher-timeframe candle's close to the next one's open, which nothing traded through at all — on the weekly, the weekend.
A week qualifies when its terminus extreme has traded a set depth into one of those arrays, 25% by default, measured from the edge price approached. The array checked is the one opposite the week's direction: a bullish week rallies into premium, a bearish week drops into discount. Because the test runs against that week's own extreme it reads correctly on every week in history, and the dashboard names what qualified it.
One array per side is drawn by default, highest timeframe winning where two overlap in price. Raising the count draws the next one down that sits elsewhere. That is display only — the check reads every array found, so tidying the chart cannot change which weeks qualify. An array stays drawn until price has traded fully through it.
A SPENT DRAW IS NOT A SETUP-
Friday is meant to deliver the give-back. A week that already paid it out on Wednesday has nothing left, however cleanly the rest reads. The deepest pullback from the terminus is tracked, and if it reached the retracement band before Friday the week is marked as worked rather than shown as live. That measurement restarts whenever the terminus moves, since a new extreme begins a new leg with its own untouched draw.
A stricter reading is available, off by default: require the terminus to have formed on Thursday or Friday.
(Visual shows the setting ON)
CONFIRMATION-
Friday's swing sets no level. It is the gate on conviction: a swing on the terminus side, confirmed on the 15M or 30M and held on a closing basis. The zones are a draw on liquidity, drawn in anticipation rather than waited on, which is how the model is used. Confirmation fires the alert and locks the measurement, so the levels stop moving. If the swing is later broken the lock releases and it re-arms on the next one.
Before that lock the levels do move, because the weekly range is not final until the extreme stops extending. That is the model rather than a repaint: nothing is read from an unclosed bar, no decision taken on a closed bar is ever revised, and the confirmation timeframe is requested one bar back so no forming higher-timeframe bar can contribute a pivot that later disappears.
WHAT IT DRAWS-
- The weekly range as an outline: a dotted level on each extreme, each beginning at the candle that formed it, closed by a riser at each end. It draws from early in the week.
- TGIF 20-30%, the retracement zone measured from the terminus back inside the range, with a midline through it — the 25% marker at default settings. The zones begin at the candle that formed the terminus, since a retracement cannot start before the extreme it runs back from exists.
- A reversal band beyond the draw. Not a target: past roughly 40% the move stops describing a Friday retracement and starts describing a larger reversal, and by 50% most of a TGIF position would already be off.
- The higher-timeframe arrays, captioned BISI, SIBI, OB+, OB- or VI alongside the timeframe that owns them.
- A dashboard carrying the chart timeframe, a countdown to the Friday close, model status, the array that qualified the week, the weekly range in points, and the distance from price to each zone.
Callouts sit at the right edge of the drawing, spaced by ATR-derived clearance so they do not stack on one another.
SETTINGS-
- Timezone, IANA format, defaulting to America/New_York. All day-of-week resolution uses it.
- Whether delivery into a higher-timeframe array is required, which of the three timeframes are scanned, the depth that counts as delivery, and how many arrays are drawn per side.
- Whether the terminus must have formed on Thursday or Friday, and how many completed weeks stay on the chart.
- The Friday hour past which the extreme is treated as set, 13:30 by default. Reported in the dashboard; it does not stop the anchors tracking a genuine new extreme.
- Swing confirmation timeframe, 15M or 30M, with adjustable pivot bars.
- Both bands are adjustable. 20/30 and 40/50 are defaults, not fixed values.
- Colours, label visibility and offset, dashboard position, and the Friday close time the countdown counts to.
NOTES-
- Non-repainting. All structure is read on closed bars.
- Completed weeks stay on the chart behind the current one, two by default and up to eight, frozen as they finished and with their callouts dropped so old text does not sit over live price. Set the count to zero for the current week only.
- Three alert conditions: Friday swing confirmed, price tapping the retracement zone, and price entering the reversal band.
- This is a mapping tool. It draws the model's levels and reports where price sits relative to them; it produces no entries, targets or stops. ICT is explicit that TGIF supplies the draw and the day, and that the entry is whichever of his models you prefer.
Disclaimer-
This is not financial advice. Levels drawn by a model are context, not a recommendation to trade, and the past behaviour of a weekly range says nothing certain about the next one. Indicator
Avg Weekly Move + ImpliedProjects the expected weekly range and the key levels that drive it, anchored to the current week and readable on any timeframe; no repaint.
What it plots
- Average weekly move band — the mean weekly move over a configurable lookback, drawn as upper/lower lines around an anchor (this week's open or prior week's close). Choose Close-to-Close or High-Low Range, and Percent basis (scales to current price) or raw Points.
- Implied move overlay (manual) — enter the expected move from your broker's option chain for the weekly expiry; plots a dashed band and shows the implied-vs-realized ratio so you can see if options are pricing more or less than history.
- Prior-week high / low — the prior week's range edges, the levels price most often reaches for.
- OpEx markers — faded shading on monthly 3rd-Friday expirations, with quad-witching (Mar/Jun/Sep/Dec) in its own color and an optional charm run-in shade.
- Dashboard (bottom-right) — avg move, implied (+ ratio), band "held %" reliability, prior-week levels, next OpEx. date/type/phase, and a per-symbol PWH-reliability flag.
How to read it
- "Held %" tells you how often the band actually contained the week — high = trustworthy, low = the symbol's vol outruns its average (treat the band loosely).
- The PWH flag reads "Reliable here" on broad-index symbols and "Weak" on range-bound names...the prior-high draw is strongest on indices; back-tested this over 3 years.
Notes
- Non-repainting: all weekly values come from completed weeks via higher-timeframe data, so they stay fixed intra-week and read identically on 15m, 1H, or daily.
- The Implied Move is a manual input (Pine can't access options data) — refresh it each week per symbol. I use ThinkOrSwim for finding the Implied Move.
- Works on any symbol; OpEx dates are universal, but the OpEx behavioral context was studied on index products. I imagine, a date or two could be off, but you can save and adjust the code as you see fit. Indicator
VWAP Intraday, Weekly, MonthlyA clean, professional implementation of three anchored VWAPs — Intraday, Weekly and Monthly — with standard deviation bands, cloud fills and candle coloring. Built for futures, stocks and forex traders who use VWAP as a core part of their analysis.
━━━━━━━━━━━━━━━━━━━━━━━━
WHAT IS VWAP?
━━━━━━━━━━━━━━━━━━━━━━━━
Volume Weighted Average Price is the most widely referenced intraday benchmark used by institutional traders, market makers and algorithms. It represents the average price at which all volume has transacted over a given period. Price above VWAP is generally considered bullish, price below is bearish. The standard deviation bands show statistical distance from fair value — the further price extends from VWAP, the more extended and mean-reversion prone the move becomes.
━━━━━━━━━━━━━━━━━━━━━━━━
FEATURES
━━━━━━━━━━━━━━━━━━━━━━━━
▶ Intraday VWAP — resets each session. Band 1 and Band 2 with optional cloud fill.
▶ Weekly VWAP — resets each week. Band 1 and Band 2 with optional cloud fill.
▶ Monthly VWAP — resets each month, correctly anchored to the first session of the calendar month. Band 1 and Band 2 with optional cloud fill.
▶ Candle Coloring — green when price closes above Intraday Band 1, red when below. Neutral inside the bands.
▶ Multiple Anchors — Globex (18:00 ET, best for NQ/ES futures), Midnight (stocks and forex), Market Open (9:30 ET RTH), London session (03:00 ET) and Asia session.
▶ Source Selection — HLC3 (typical price, institutional standard), Close, HL2 or OHLC4.
━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO USE
━━━━━━━━━━━━━━━━━━━━━━━━
Futures traders (NQ, ES, MNQ): use Globex anchor. This anchors VWAP to the 18:00 ET session open, matching institutional platforms like Sierra Chart and Bookmap.
Stock traders: use Midnight or Market Open anchor depending on your preference.
Forex traders: use Midnight anchor for a standard daily reset.
Band 1 (1.0 std dev) is the primary level. Price rejecting from Band 1 and reversing toward VWAP is one of the most reliable setups in VWAP trading. Price closing outside Band 1 signals a strong directional move. Band 2 (2.0 std dev) marks extended moves where mean reversion is statistically more likely.
Weekly and Monthly VWAPs act as macro support and resistance levels. Price above both is a bullish macro structure. Price between them shows a transitional zone. Price below both is bearish.
━━━━━━━━━━━━━━━━━━━━━━━━
SETTINGS
━━━━━━━━━━━━━━━━━━━━━━━━
All colors, opacity and line thickness are adjustable by clicking each color swatch — the popup includes color, opacity, thickness and line style in one place.
Each band's standard deviation multiplier is adjustable. The default 1.0 and 2.0 are the most commonly used values but some traders prefer 1.5 / 2.5 depending on their instrument and style.
━━━━━━━━━━━━━━━━━━━━━━━━
NOTES
━━━━━━━━━━━━━━━━━━━━━━━━
- Works on any timeframe and any instrument with volume data.
- For accurate Globex VWAP on NQ/ES, ensure your chart data includes the overnight session.
- Monthly VWAP is anchored to the first Globex session of each calendar month, not midnight of the 1st — this matches the institutional convention for futures. Indicator
Weekly Range Break Planner [AGPro Series]# Weekly Range Break Planner
🧠 Core Idea
Is the weekly range break strong enough to monitor, or is price likely to fail back inside the range?
📌 Overview / What it does
Weekly Range Break Planner is a weekly range decision-support script built to evaluate whether price is breaking beyond the previous week's high or low with enough structural quality.
The script maps the previous weekly high, low, and midpoint, detects bullish or bearish breaks, builds a retest shelf around the broken boundary, scores the break from 0 to 100, and summarizes the current state inside a compact AG Pro panel.
It does not predict price direction, automate trades, or provide guaranteed signals. It is designed to organize weekly range context, break quality, retest behavior, target room, and invalidation risk into a clean visual workflow.
🎯 Purpose & Design Philosophy
Weekly highs and weekly lows are widely watched reference points, but not every break beyond them is meaningful.
This script was built for traders who want to separate a clean weekly range break from a weak expansion, failed breakout, or noisy return back into the prior range.
The design supports structured observation: range first, break quality second, retest behavior third, and action state last.
⚡ Why This Script Is Different
Most tools mark weekly highs and lows or show simple breakout signals.
This script does NOT stop at drawing weekly levels.
Instead, it evaluates what happens after price breaks the range: whether the break has enough close quality, whether the retest shelf is respected, whether target room remains, and whether the context is still valid.
⚙️ Methodology
1. Previous Weekly Range Mapping
2. Break Boundary Detection
3. Retest Shelf Construction
4. Break Quality Scoring
5. Target Room Evaluation
6. Invalidation And Expiration Handling
7. Panel And Alert Output
🗺️ How to Read the Chart
The weekly range box marks the previous week's high-low structure.
The high and low rails show the main break boundaries.
The midpoint line helps users understand where price is relative to the prior weekly balance.
The retest shelf appears around the broken boundary after a weekly range break.
READY BREAK labels appear when the break context meets the required score threshold.
Target rails show projected continuation references after a qualified break.
The panel summarizes Range State, Break Score, Retest, Room, and Action.
🚦 Signals & States
• READY → A qualified weekly range break has formed.
• MONITOR → Price has broken a weekly boundary and the script is evaluating quality.
• WAIT → The previous weekly range is valid, but no active break context is present.
• INVALIDATED → Price failed back inside the weekly range after a break.
• EXPIRED → The break window closed without a qualified context.
• BLOCKED → The previous weekly range is not suitable for evaluation.
🔔 Alerts Logic
Bullish Weekly Range Break Ready triggers when price breaks above the previous weekly high with enough quality.
Bearish Weekly Range Break Ready triggers when price breaks below the previous weekly low with enough quality.
Weekly Range Break Invalidated triggers when price fails back inside the prior weekly range after a break.
Weekly Range Break Expired triggers when the evaluation window closes without a qualified break state.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The break score combines weekly range fit, close distance beyond the boundary, retest shelf behavior, time quality, relative volume, and available target room.
When these elements align, the context becomes stronger.
When they do not align, the script remains in WAIT, MONITOR, INVALIDATED, EXPIRED, or BLOCKED state.
📊 When to Use
• Weekly high and weekly low break analysis
• Breakout-retest workflows
• Intraday monitoring around prior weekly extremes
• Swing context planning
• Trend continuation after a range expansion
⚠️ When NOT to Use
Avoid relying on this script in extremely low-liquidity markets, very noisy symbols, holiday sessions, or conditions where the previous weekly range is not meaningful.
It should not be used as a standalone decision tool without broader market context, risk planning, and independent confirmation.
🎛️ Key Inputs
• Minimum Weekly Range filters weak or compressed prior weekly ranges.
• Break Buffer ATR controls how far price must close beyond the weekly boundary.
• Retest Shelf ATR controls the depth of the shelf around the broken boundary.
• Invalidation Buffer ATR controls how far price must close back inside the range before invalidation.
• Minimum Ready Score controls how strong the score must be before READY appears.
• Target inputs define continuation reference rails from the broken boundary.
• Visual settings control boxes, rails, labels, right-side tags, panel location, and font size.
🖥️ Interface & Visual Design
The interface is designed to make the weekly range context readable at a glance.
The chart shows the prior weekly range, the active break boundary, the retest shelf, and target-room references without turning the screen into a generic breakout overlay.
The AG Pro panel gives compact decision context while preserving chart visibility.
🧪 Practical Usage Workflow
1. Check whether the previous weekly range is valid.
2. Watch for a close beyond the weekly high or low.
3. Observe the retest shelf around the broken boundary.
4. Read the break score, retest state, and room value.
5. Treat READY as an attention state and confirm with broader market context.
🔍 Interpretation Guidelines
A higher break score means the weekly range break is cleaner according to the script logic.
A clean retest shelf response can strengthen the context.
Low remaining room means the move may already be extended relative to the projected target.
READY means the context deserves attention, not that price must continue.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed signals.
It does not replace risk management or independent analysis.
⚠️ Limitations & Transparency
Weekly range behavior changes across markets, timeframes, volatility regimes, and liquidity conditions.
The score is rule-based and depends on current chart timeframe, ATR normalization, volume behavior, and the previous weekly range.
Different symbols may require different sensitivity settings.
🧠 Market Context Notes
Weekly range breaks can be more meaningful when aligned with trend, liquidity response, volume participation, and clean retest behavior.
Breaks that quickly return inside the prior weekly range often need extra caution.
🔐 Non-Promise Statement
No script can guarantee future price behavior.
This tool provides structured visual context only.
📉 Risk Disclosure
Trading involves risk.
Users remain responsible for their own decisions.
This script is for educational and analytical purposes only and does not provide financial advice or guaranteed trading outcomes.
Indicator
Weekly Open Reaction Map [AGPro Series]Weekly Open Reaction Map
🔹 OVERVIEW
Weekly Open Reaction Map is a focused weekly open overlay built for traders who use the current weekly open as a higher-timeframe anchor.
The weekly open is one of the simplest and most widely watched reference levels on a chart. Many traders mark it manually, but a plain horizontal line does not show whether price is accepting above it, losing it, reclaiming it, or repeatedly reacting through the same area. This script turns the weekly open into a structured reaction map.
The script plots the current weekly open, builds an adaptive reaction band around it, detects accepted behavior above or below the level, marks selective reclaim and loss events, and summarizes the active state in a compact dashboard.
The goal is clarity:
How is price reacting around the current weekly open?
This is not a broad level engine. It is not a full weekly range dashboard. It is not a prior high or prior low tool. It is not a session-open model. It is a single-anchor weekly open reaction framework designed to keep the chart clean while adding practical context.
🔹 WHAT MAKES IT DIFFERENT
Weekly Open Reaction Map is built around one level only: the current weekly open.
Instead of plotting a large set of reference prices, the script focuses all of its logic on the active weekly open and asks whether price is above it, below it, reclaiming it, losing it, or still testing the reaction area.
Key differentiators:
• Single-anchor design centered only on the current weekly open
• Adaptive reaction band instead of a fragile one-tick line
• Acceptance-side model using sustained closes beyond the band
• Reclaim and loss labels designed to stay selective by default
• Concept-native rectangular reaction zones around confirmed weekly open behavior
• Compact panel showing distance, acceptance side, active-week reaction count, weekly bias, and last event
• Cleaner default visual mode tuned for 1H, 4H, and 1D public-chart presentation
• Optional initial acceptance events for users who want more context
The script is intentionally restrained. It does not try to become a full market structure suite. Its value comes from making one simple, popular, and highly searchable level more readable.
🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS
This script was designed to stay separate from existing AGPro public concepts.
It does not overlap with Daily Open Acceptance Map because this script does not reset around the daily open. The weekly open carries context across several trading days, so the logic is built around a multi-day weekly anchor rather than an intraday daily reference.
It does not overlap with Reference Price Operating Map because this script does not compare multiple reference prices. There is no multi-reference framework here. The weekly open is the only operating level.
It does not overlap with Session Reaction Map because this script does not evaluate Asia, London, New York, or session-start behavior. It continuously follows the active week and reads how price behaves around the weekly open over time.
It does not overlap with PDH PDL PWH PWL Engine because this script does not plot previous day highs, previous day lows, previous week highs, previous week lows, or active range corridors. It avoids becoming a prior-period high/low engine.
It does not overlap with generic support and resistance scripts because its boxes are not derived from swing pivots, historical ranges, or broad supply-demand zones. The reaction zones exist only when weekly open behavior is confirmed.
The scope is narrow by design:
Current weekly open.
Acceptance.
Reclaim.
Loss.
Reaction zones.
Weekly bias.
⚙️ METHODOLOGY
The script reads the current weekly open from the weekly timeframe and projects it onto the active chart.
Around that weekly open, it builds a reaction band. This prevents the script from treating the weekly open as an unrealistically perfect single price. The band can be sized by:
• ATR for volatility-adjusted behavior
• Percent for proportional market structure
• Ticks for fixed instrument precision
The acceptance model checks whether price can sustain closes beyond the reaction band. A single close is not enough by default. The user can define how many consecutive closes are required before the script recognizes accepted behavior.
The engine then tracks which side of the weekly open has been established during the active week.
A weekly open reclaim is detected when price had already traded below the weekly open context and then confirms acceptance back above the level after a recent band interaction.
A weekly open loss is detected when price had already traded above the weekly open context and then confirms acceptance below the level after a recent band interaction.
Optional initial acceptance events can also be enabled. These show which side of the weekly open became dominant first after a new week begins. They are disabled by default so the public chart remains cleaner and more focused on reclaim/loss transitions.
Confirmed events can create rectangular reaction zones. These zones preserve the weekly open area where the reaction was confirmed and project it forward for context. They are concept-native zones, not generic support/resistance boxes.
📊 PANEL
The panel gives a fast read of the active weekly open condition.
Distance
Shows how far current price is from the weekly open, including a percent reading.
Acceptance Side
Shows whether price is accepted above the weekly open, accepted below it, or still testing the weekly open band.
Reaction Count
Counts confirmed weekly open reactions for the active week. The panel uses active-week logic, while visual label limits keep historical charts clean.
Weekly Bias
Summarizes the current weekly open state as Bullish Control, Bearish Control, or Neutral Test.
Last Event
Shows the latest confirmed weekly open event, such as WO Reclaim, WO Loss, WO Accept +, or WO Accept -.
The panel includes adjustable location, theme, and font size controls. The first panel row follows the AGPro standard: a single merged blue header row containing only the script name.
🎛️ KEY INPUTS
Show Weekly Open Line
Controls whether the current weekly open line is displayed.
Weekly Open Line Width
Controls the visual weight of the weekly open reference line.
Reaction Band Width Mode
Choose ATR, Percent, or Ticks to define the width of the weekly open reaction area.
ATR Width Multiplier
Controls volatility-adjusted band width when ATR mode is selected.
Percent Width
Controls proportional band width when Percent mode is selected.
Tick Width
Controls fixed band width when Ticks mode is selected.
Acceptance Confirmation Bars
Defines how many consecutive closes are required before price is treated as accepted above or below the weekly open band.
Recent Touch Window
Requires confirmed events to occur near a recent weekly open band interaction.
Show Active Weekly Open Band
Displays the live weekly open reaction corridor.
Show Confirmed Reaction Zones
Draws extended boxes around confirmed weekly open reclaim, loss, or optional initial acceptance behavior.
Reaction Zone Extension Bars
Controls how far confirmed weekly open reaction zones project forward.
Maximum Reaction Zones
Limits the number of historical zones shown on the chart.
Show Reclaim / Loss Labels
Displays selective weekly open reclaim and loss labels.
Show Initial Acceptance Events
Allows first-side weekly open acceptance events to create labels and zones. Disabled by default for a cleaner public view.
Minimum Bars Between Labels
Controls cross-week spacing between event labels, helping avoid historical label clusters.
Maximum Event Labels
Limits visible historical event labels for a cleaner chart.
Label Offset ATR
Moves labels away from candles so they stay readable.
Label Font Size
Controls event label size. Normal is the default.
Panel Location
Moves the dashboard to the preferred chart location.
Panel Theme
Selects Dark, Light, or Auto panel styling.
Panel Font Size
Controls dashboard text size. Normal is the default.
🔍 HOW TO READ IT
Start with the weekly open line.
If price is above the line and the panel shows Above WO, the market is currently accepting above the weekly open band.
If price is below the line and the panel shows Below WO, the market is currently accepting below the weekly open band.
If the panel shows Testing WO, price is still close enough to the reaction band that the weekly open has not resolved clearly.
WO Reclaim
This label means price previously moved below the weekly open context and later confirmed acceptance back above it.
WO Loss
This label means price previously held above the weekly open context and later confirmed acceptance below it.
Reaction Zones
These boxes highlight the weekly open area where a confirmed reaction occurred. They can act as visual memory zones for later retests, pauses, or renewed pressure around the same weekly anchor.
Weekly Bias
The bias reading is not a standalone trade call. It is a context label that tells whether the active week is currently being controlled above the weekly open, below the weekly open, or still near the test area.
Reaction Count
This helps identify whether the week has been clean and directional or has already produced several confirmed weekly open reactions.
🧩 BEST USE CASES
Weekly open context
Use the script to understand whether the active week is being accepted above or below its opening level.
Reclaim tracking
Use WO Reclaim labels to identify when price regains the weekly open after trading below it.
Loss tracking
Use WO Loss labels to identify when price gives up the weekly open after previously holding above it.
Multi-timeframe planning
Use the weekly open as a higher-timeframe anchor while viewing 1H, 4H, or 1D charts.
Clean chart workflow
Use the script when you want one important weekly reference instead of a crowded stack of levels.
Reaction-zone review
Use projected boxes to remember where meaningful weekly open reactions were confirmed.
Public chart publishing
Use the default settings for cleaner PulseWire screenshots and a more premium chart layout.
🧠 VISUAL DESIGN PHILOSOPHY
The design philosophy is premium restraint.
The weekly open should be easy to identify, but it should not dominate the chart. Labels should be useful, but not constant. Zones should preserve meaningful reaction areas, but not turn the screen into a grid of boxes.
The default settings are intentionally cleaner:
• Initial acceptance events are off by default
• Reclaim and loss behavior remains the primary visible story
• Label spacing works across weeks, not only inside one week
• Historical label and zone limits are conservative
• The panel uses a compact AGPro dashboard style
• The active weekly open band is visible without overwhelming candles
This helps the script remain practical on 1H, 4H, and 1D views while still giving the chart enough structure to feel complete.
🔔 ALERTS
The script includes alert conditions for key weekly open events:
Weekly Open Reclaim
Triggers when price confirms a reclaim of the weekly open after previously trading below the weekly open context.
Weekly Open Loss
Triggers when price confirms a loss of the weekly open after previously trading above the weekly open context.
Weekly Open Accepted Above
Triggers when price confirms acceptance above the weekly open band.
Weekly Open Accepted Below
Triggers when price confirms acceptance below the weekly open band.
These alerts are designed for context awareness around the weekly open. They are not intended to replace a complete trading plan or broader market review.
🔹 LIMITATIONS AND TRANSPARENCY
Weekly Open Reaction Map is intentionally focused on one reference level. It does not attempt to map every support/resistance area on the chart.
The script does not include previous day highs, previous day lows, previous week highs, previous week lows, session opens, daily opens, volume profile levels, swing pivots, or order-flow data.
Because the weekly open can behave differently across assets and timeframes, users may need to adjust the reaction band width, confirmation bars, and label spacing for their market.
On very low timeframes, labels can appear more frequently if sensitivity is increased. On higher timeframes, fewer but more meaningful events are expected.
The weekly bias panel is a context tool. It describes the current relationship between price and the weekly open; it does not predict future price movement.
The script is built to stay clean, transparent, and focused. Its strength is not feature volume. Its strength is making one widely used weekly reference level easier to read.
✅ IDEAL USER
This script is ideal for traders who:
• Use the weekly open as a key higher-timeframe reference
• Want a cleaner way to read weekly open acceptance, reclaim, and loss
• Prefer focused tools over crowded multi-level dashboards
• Trade crypto, forex, indices, or liquid stocks where the weekly open is actively watched
• Use 1H, 4H, or 1D charts for market context
• Want reaction zones without turning the chart into a generic support/resistance map
• Publish or review PulseWire charts and need a clean visual presentation
• Prefer structured context over excessive labels and visual noise
Weekly Open Reaction Map is built for traders who want the weekly open to become more than a line. It turns that level into a readable acceptance and reaction framework while keeping the chart professional, restrained, and publication-ready. Indicator
Indicator
Key Levels Pro [AGPro Series]Key Levels Pro
🔑 Overview
Key Levels Pro is a comprehensive, non-repainting level tracker that consolidates every institutionally significant price reference into one clean overlay. Previous day, week, and month highs/lows (PDH, PDL, PWH, PWL, PMH, PML) are plotted alongside Asian, London, and New York session highs and lows. Every level is actively monitored — touch count, break count, and respect rate update in real time, giving you a live quality score for each price zone.
Most level scripts stop at drawing lines. Key Levels Pro goes further: lines automatically thicken on repeated touches, switch to dashed style when broken, and fade to muted color to signal invalidation. Zone rectangles extend back to the formation bar of each level, making historical respect visible at a glance. An ATR-aware label collision system keeps the chart readable on every timeframe, and same-price levels are intelligently deduplicated so you never see four overlapping labels at the same price.
───────────────────────────────────────────────────────
📐 Unique Edge
Unlike generic pivot or S/R scripts, Key Levels Pro tracks the behavioral quality of each level — not just its existence. A level that has been tested five times without breaking carries a different weight than a fresh, untested one. Key Levels Pro surfaces that difference automatically through line width, style, and panel data.
What makes it distinct:
🔹 Complete previous-period coverage (PDH/PDL, PWH/PWL, PMH/PML) in one overlay, without redundant current-period duplicates.
🔹 Live session tracking for Asian, London, and New York simultaneously, with automatic hiding on Daily and higher timeframes.
🔹 Per-level touch count, break count, and respect rate computed from actual historical price interaction.
🔹 Dynamic line thickening on repeated touches (width 1 → 2 → 3).
🔹 Auto-broken state with dashed style + muted color — no distracting flags or banners.
🔹 Historical zone boxes extending back to the formation bar of each level.
🔹 ATR-aware label collision resolution that stacks overlapping labels vertically.
🔹 Price-based deduplication: when two levels share the same price, the higher-priority one wins (Monthly > Weekly > Daily > Session).
🔹 ATR-normalized proximity to the nearest level above and below the current price.
───────────────────────────────────────────────────────
🔬 Methodology
Previous-period levels are pulled from the daily, weekly, and monthly timeframes using request.security() with lookahead enabled for the completed-period values. This approach is standard, transparent, and non-repainting — historical data does not change.
Session levels are tracked bar by bar using customizable session time inputs. Each session resets at its start time and tracks the running high and low until the session closes. The Asian, London, and New York sessions can each be configured independently.
Touch detection uses an ATR-based tolerance band (default 10% of ATR). When price closes within that tolerance of a level, the touch counter increments. A break is registered when price closes on the opposite side of a level compared to the prior bar. Respect rate is calculated as touches / (touches + breaks) × 100.
Line width scales with touch count: 1 touch = width 1, 2–4 touches = width 2, 5+ touches = width 3. Broken levels switch to dashed style and a muted color.
The label collision system operates in three stages: first, all enabled levels are collected into a sorted array; second, same-price levels are deduplicated based on priority (Monthly highest, Session lowest); third, an upward sweep enforces minimum vertical spacing using a blend of ATR and chart-range heuristics, ensuring labels never overlap regardless of market volatility.
───────────────────────────────────────────────────────
📊 Signals & States
This script is a visualization and data tool — it does not generate buy or sell signals.
Level states are communicated visually:
🔹 Active (solid line, full color): level has not been broken.
🔹 Touched (thicker line, 2–3px): level has been tested one or more times.
🔹 Broken (dashed line, muted slate color): level has been decisively closed through.
Info panel states:
🔹 Session: active market session (Asian / London / New York / Off-Hours / N/A on Daily+).
🔹 Near Above / Near Below: price of the closest active level on each side of the current close.
🔹 Dist Above / Below ATR: distance expressed as a multiple of ATR(14).
🔹 Touch and respect rate data for PDH, PDL, PWH, PWL.
───────────────────────────────────────────────────────
⚙️ Key Inputs
Level Groups: Toggle previous day, week, month, and session levels independently.
Session Times: Fully customizable start/end times for Asian, London, and New York sessions in exchange timezone.
Zone Style: Enable/disable S/R zones and adjust zone transparency.
Lines & Labels: Set line extension length, toggle labels, choose label density (All / Reduced / Minimal), set font size, and enable or disable same-price deduplication.
Info Panel: Toggle panel, set location (six positions), and choose theme (Dark / Light).
ATR Settings: Set ATR period and touch tolerance as an ATR multiple (0.02 to 0.50).
───────────────────────────────────────────────────────
📖 How to Use
1. Add the script to a chart — all major levels appear immediately.
2. Adjust session times if trading non-crypto markets.
3. Watch line thickness: thicker = more tested = stronger historical reaction zone.
4. Dashed + muted color = broken. Treat broken levels as potential new S/R from the opposite side (role reversal).
5. Use the panel's Near Above and Near Below fields to gauge proximity before entry or exit decisions.
6. Use "Reduced" density (default) for cleaner charts, or switch to "All" when you need session context.
7. Works on all asset classes: crypto, forex, equities, indices, commodities.
Recommended timeframes: 15m–4H for session levels; 1H–1D for previous-period levels.
───────────────────────────────────────────────────────
⚠️ Limitations & Transparency
🔹 Session tracking is session-relative and resets each new session.
🔹 Touch tolerance is an ATR-based heuristic and may need adjustment on extremely low-volatility instruments.
🔹 All data is historical. Touch count and respect rate describe past price behavior, not future outcomes.
🔹 This script is not a trading strategy, does not issue trade signals, and cannot predict market direction.
🔹 On exotic or illiquid instruments with large gaps, formation-bar zone boxes may appear truncated if the level formed outside the chart's visible range.
───────────────────────────────────────────────────────
🛡️ Risk Disclosure
This script is provided for informational and educational purposes only. It does not constitute financial advice, investment advice, or a recommendation to buy or sell any financial instrument. All trading involves risk. Past level behavior does not guarantee future results. Always use proper risk management and test any approach in a demo environment before committing real capital. Indicator
Session Reaction Map [AGPro Series]Session Reaction Map
🔷 OVERVIEW
Session Reaction Map is a premium intraday study that maps how price reacts to the most important daily and weekly reference levels right at the opens of the Asia, London and New York sessions. Each session open is evaluated inside a fixed measurement window, and the resulting reaction is broken down into four dimensions: dominant move, close follow-through, wick rejection and counter-move penalty. The output is a single 0-100 reaction score that is then translated into tier-coded labels, premium reaction zones, an active reference band and a compact status panel, so you can instantly read what happened at each session open without scrolling through candles.
The indicator is designed for discretionary traders, systematic traders, SMC and price action practitioners who want a clean, consistent and quantitative way to read session open behaviour around PDH, PDL, PDM, Daily Open and Weekly Open. Reactions are drawn as directional zones (bull zones above the reference and bear zones below), with up or down pointing labels centered on the reaction, so orientation is always unambiguous.
🧭 UNIQUE EDGE
Most session open tools only mark time windows or highlight levels. Session Reaction Map goes further and quantifies the quality of the reaction itself. Four independent dimensions are measured against a fixed ATR-normalized baseline, and the final score determines not only whether a label is shown but also how prominent it is. Elite scores (80+) get the strongest visuals; strong scores (70-79) get a slightly softer treatment; watch scores (55-69) are coded as caution; anything below 55 is filtered out by default.
This separation between detection (a session open near a reference) and evaluation (the reaction quality score) is the core edge. It lets you focus only on the best intraday reactions and discard noise automatically, while still being able to audit every component by adjusting the ATR length, touch tolerance, evaluation window and score thresholds.
⚙️ METHODOLOGY
Session detection uses the chosen timezone and three session windows (Asia, London, New York), each with its own editable open range. When a session open occurs, the script checks whether the open price is within an ATR based touch tolerance of any enabled reference level (Previous Day High, Previous Day Low, Previous Day Mid, Daily Open or Weekly Open). If so, a reaction window is engaged on that bar and tracked for a configurable number of bars.
During the reaction window, the live zone, reference band and dashed reference line are updated in real time. When the window completes, the final score is computed as:
• Dominant move score (up to 45 points) - scaled against 1.20 x ATR
• Close follow-through score (up to 30 points) - scaled against 0.90 x ATR
• Wick rejection score (up to 15 points) - scaled against 0.50 x ATR
• Counter-move penalty (up to -20 points) - scaled against 1.00 x ATR
The sum is clamped into the 0-100 range and mapped into four tiers: Elite, Strong, Watch and Weak. The dominant direction of the reaction (up or down) is determined by comparing the upside excursion from the reference to the downside excursion from the reference during the window.
🎯 SIGNALS AND VISUALS
• Reaction zones - rectangular areas connecting the reference level with the reaction extreme, tier-coded by score and bias
• Active reference band - a thin accent band around the current reference level during a live reaction window
• Dashed reference line - marks the exact reference price while the reaction is being measured
• Tier-coded labels - up-pointing labels below bullish reactions and down-pointing labels above bearish reactions, centered on the reaction window
• Session dots - small colored markers that optionally display only on valid events, keeping the chart clean
• Active measurement highlight - an ultra-soft background shade on bars inside a live reaction window
Labels use a ring buffer overlap check, so dense multi-session conditions do not pile labels on top of each other. When two labels would visually conflict, the higher-scored reaction wins.
🛠️ KEY INPUTS
Sessions - enable/disable and edit Asia, London and New York session windows, each with its own color and timezone.
Reference Levels - individually toggle PDH, PDL, PDM, Daily Open and Weekly Open.
Reaction Logic - ATR length, touch tolerance in ATR, evaluation bars, label score filter, minimum label score, overlap reduction (bars and vertical ATR gap).
Visuals - show/hide reference levels, session dots, dots only on valid events, reaction zones, minimum score for zones, zone transparency and extension, live reaction zone, active reference band with its ATR size and transparency, active measurement highlight, level width, label size, label offset in ATR and label background transparency.
Panel - show/hide, position (six anchor points), Dark or Light theme, font size, optional guide row.
All numerical inputs carry professional English tooltips explaining their role, so the script can be tuned for any symbol, timeframe and trading style.
📘 HOW TO USE
1. Apply the script on an intraday timeframe. It is designed for intraday use and will stay passive on daily/higher timeframes.
2. Recommended starting timeframe is 4H for swing intraday context, and 1H for tactical intraday work. Lower timeframes (15m, 30m) work too but may produce dense output.
3. Start with the default settings. Observe which sessions and which reference levels generate the most Elite and Strong reactions on your symbol.
4. Use the panel to monitor the current state: last session, last reference, bias, score, tier, label filter, zone filter and the active reaction status.
5. Treat Elite (80+) and Strong (70-79) reactions as the main signals. Watch tier is informative and Weak tier is generally discarded.
6. Align with your own confluence: higher timeframe bias, structure, orderflow, or whatever your primary framework is. The script does not issue buy or sell calls - it scores reactions, and you decide.
⚠️ LIMITATIONS AND TRANSPARENCY
• This is not a strategy and does not place orders. No backtest statistics are implied.
• Reaction scores are computed after the evaluation window completes, so they are not repainting but are confirmed with a lag equal to the evaluation window size.
• The live reaction zone updates during the window and is finalized when the window closes.
• Session behavior varies significantly by symbol (crypto vs FX vs equities) and by volatility regime. Inputs should be tuned per symbol.
• Daily and Weekly references use standard request.security with barmerge.lookahead_off to avoid look-ahead bias.
• The script is not a forecasting tool. It is a post-event quantification of how price has just reacted to a known reference level.
🛡️ RISK DISCLOSURE
Trading involves substantial risk. Past reactions, patterns, zones or scores do not guarantee future performance. This script is provided for educational and analytical purposes only and is not financial advice. Always combine any tool with your own research, a defined risk plan and proper position sizing. You are solely responsible for your trading decisions. Indicator
Reference Price Operating Map [AGPro Series]Reference Price Operating Map
🔹 OVERVIEW
Reference Price Operating Map is a focused overlay that consolidates the four most universally watched reference prices — Daily Open, Weekly Open, Monthly Open, and Previous Close — into a single operating map. It tracks how price interacts with each level in real time, attributes control to the reference currently leading price action, groups overlapping references into confluence clusters, and fades distant context so the active map stays clean.
The chart answers one direct question at a glance: which reference is controlling the session right now.
Built for intraday operators, swing traders, and position traders who anchor their bias to session and period opens. Works on any symbol and any intraday or daily timeframe.
🔸 WHAT MAKES IT DIFFERENT
Most open-line indicators simply draw horizontal lines for Daily, Weekly, Monthly, and Previous Close and stop there. This script goes further by adding four layers on top of those lines:
• State tracking — each reference is classified as Untouched, 1st Touch, Tested, Held, Reclaimed, or Rejected, and the state updates bar by bar as price interacts with the level.
• Control attribution — a proximity-weighted scoring system selects one reference as the current "controller" of price action, highlighted with a dominant-row background in the panel and a thicker line on the chart.
• Confluence grouping — when two or more references sit within 0.5 ATR of each other, they collapse into a single cluster label (for example "D-Open + W-Open + PClose") instead of stacking separate labels on top of each other.
• Distance-aware rendering — references far from current price are demoted to a thin gray zone with a dotted line, keeping them visible as structural context without crowding the active map.
The engine also includes a far-aware state machine: references that price has not meaningfully engaged stay in the Untouched state instead of being forced into misleading classifications.
🔷 METHODOLOGY
Reference levels are pulled directly from the higher timeframe open (Daily, Weekly, Monthly) and the previous daily close using lookahead-safe security calls on confirmed bars.
Distance classification uses ATR(14) as a volatility scale. A reference is considered "near" when price is within a configurable ATR multiple and "far" when it exceeds the far-distance threshold. This adapts the map to both low-volatility ranges and high-volatility expansions without manual tuning.
State transitions are driven by a finite state machine with six states. Key transitions:
• Untouched → 1st Touch when price enters the touch zone (default 0.25 ATR) or wicks through it.
• 1st Touch / Tested → Held when price moves cleanly away from the level on the same side.
• 1st Touch / Tested → Reclaimed when price closes on the opposite side (optionally requiring multi-bar confirmation).
• Any engaged state → Rejected when a large wick rebounds from the level with more than 60 percent wick ratio.
• Held / Rejected → Reclaimed on a confirmed cross.
The control score combines proximity (how close price is to the reference relative to ATR) with a state weight (Reclaimed and 1st Touch score highest, Held scores lowest). The reference with the highest score is tagged as controller; if no reference has meaningful engagement the panel reports No Active Control.
🔶 SIGNALS AND ALERTS
Three alert conditions are exposed:
• Reference Touched — fires the first time any reference is touched in its period.
• Reference Reclaimed — fires when any reference transitions into the Reclaimed state.
• Reference Rejected — fires when a large-wick rejection bar is registered at any reference.
On-chart, first-touch diamond markers are placed on recent bars to make period engagement easy to spot in screenshots and reviews. The panel footer reports the current controller and updates in real time.
🔹 KEY INPUTS
Reference Lines — independent toggles for Daily Open, Weekly Open, Monthly Open, and Previous Close.
Display — Show Active References Only (hide untouched references for a cleaner map), Strict Reclaim Confirmation (require multiple confirmation bars for Reclaim), Label Density (Minimal shows only the dominant reference, Normal shows all active, Detailed appends state names to labels), Show Reaction Bands, Mark First Touches.
Panel — position (four corners), font size, label font size. All default to Normal per AG Pro Series visual standards.
Sensitivity — Touch Threshold (ATR multiple defining a touch), Reclaim Confirm Bars (strict-mode confirmation count), Band Width (reaction band width in ATR), Far Distance (ATR multiple beyond which references are faded to context).
All parameters are ATR-scaled so defaults transfer cleanly across instruments and timeframes.
🔸 HOW TO USE
1. Open the panel and read the controller. If the footer shows "D-Open Controls" with a Bull bias, intraday operators treat Daily Open as the session pivot and trade with that bias until the state changes.
2. Watch the confluence label. A grouped label such as "D-Open + W-Open + PClose" means three references are stacked — a cluster of this kind is typically a higher-conviction zone than a single isolated reference.
3. Use state transitions as triggers. A Rejected state at Monthly Open during a rally is a different signal than a Reclaimed state at the same level. The state tells you what just happened at the level, not just where the level is.
4. Use the far zone as context. A Monthly Open plotted as a gray zone five ATR away from price is not an execution level — it is orientation. When price approaches it, the zone transitions into an active band and the state engine re-engages.
5. Combine with your own structure work. This map is designed to sit underneath price action analysis, order flow, or trend tools, not replace them.
🔷 LIMITATIONS AND TRANSPARENCY
• This is an indicator, not a strategy. No entries, exits, position sizing, or backtesting is performed.
• Reference prices are sourced from higher timeframe candles using confirmed lookahead. Results on intraday charts should match the official Daily, Weekly, and Monthly opens of the exchange the chart is connected to.
• State classifications are heuristic. They describe observed behavior at each level in historical terms and should not be read as forecasts. A Reclaimed state is a description of what just happened, not a prediction of what comes next.
• ATR-based thresholds mean the map adapts to volatility but can feel different on very low-volume or very thinly traded instruments. Adjust the touch threshold and far distance inputs if defaults feel too loose or too tight.
• Confluence grouping uses a 0.5 ATR window. On very wide-range days this window can become large; on very narrow ranges it can feel tight.
🔶 RISK DISCLOSURE
This indicator is provided for informational and educational purposes only. It does not constitute financial advice, investment advice, trading advice, or any other form of advice. Past performance of any level, state, or methodology shown on the chart does not guarantee future results. Trading and investing involve substantial risk of loss. You alone are responsible for your decisions, for managing your risk, and for complying with the laws and regulations that apply to you. Test any tool on a demo account or in paper trading before using it with real capital. Indicator
Indicator
Weekly Sunday Close-Open Line for Futures📊 Futures Weekend Transition Marker
Keep your eyes on the gap! 🚀
This lightweight, clean indicator is designed specifically for Futures traders (ES, NQ, YM, GC, etc.) who need to see exactly where the Friday close ends and the Sunday open begins. No more squinting at the time scale to find the start of the trading week! 🧐
✨ Key Features:
● Vertical Dividers: Automatically drops a line at the exact moment the market reopens on Sunday. 🚪🔓
● Fully Customizable: Change the line color, thickness, and style (Solid, Dashed, or Dotted) to match your chart theme. 🎨
● "Sideways" Labels: Features unique vertical-stacked text labels that stay out of the way of your candles. 📏
● Smart Offset: Use the "Vertical Offset" setting to float the label perfectly above the price action so your charts stay clutter-free. ☁️
● Intraday Optimized: Works seamlessly on all intraday timeframes (1m, 5m, 15m, 1h, 4h) where Sunday opening data is present! ⏳
🛠️ How to use:
Load it onto any Futures contract.
In settings, type your custom text (e.g., W E E K) to get that vertical look.
Adjust the Vertical Offset if the text is touching your candle wicks.
Perfect for identifying weekend gaps and weekly opening ranges! If you find this helpful, please drop a like! 👍🔥 Indicator
VWAP x3 [crlmx] Flexible tripple VWAP for multi-timeframe analysis with session-based
anchors for volume-weighted fair value benchmark and trend direction.
Key Features
- 3x fully adjustable VWAP anchor periods
- Off, 30min, 1H, 2H, 4H, 8H, 12H, D, W, M, Q, Y,
- New York, London, Asia Sessions with adjustable (UTC)
- Clean session breaks in VWAP line
- No skewed line continuation between anchor periods
- Lookback control for cleaner charts
- Session VWAPS exclude weekend days
- Optional VWAP labels with controls
- Streamlined inputs / UI brought to you by crlmx
Trading Applications
- VWAP 1 (Daily): intraday fair value
- VWAP 2 (Weekly): swing trade context
- VWAP 3 (Monthly): position trade reference
- Turn off unused VWAPs for cleaner charts
- Customizable to any anchor combination
- Examples;
Day Trading: VWAP1: 30min | VWAP2: 1H | VWAP3: Day
Swing Trading: VWAP1: Day | VWAP2: Week | VWAP3: Month
Session Trading: VWAP1: NY Session | VWAP2: London | VWAP3: Asia
Position Trading: VWAP1: Week | VWAP2: Month | VWAP3: Quarter
Version History
v1.43 (Latest - 19 Jan 2026)
- Three independent VWAP lines
- Session-based anchors (NY/London/Asia)
- Configurable session times (UTC)
- Lookback parameter
- Labels with size and offset options
- Clean session breaks at boundaries
Indicator
MTF Moving Averages [ST]**MTF Moving Averages ** is a professional Multi-Timeframe (MTF) indicator designed to plot Daily and Weekly trend lines directly on intraday charts (e.g., 5m, 15m, 1H).
This tool solves the common problem of losing "big picture" context while day trading. It allows you to see exactly where the Daily 20 EMA or Weekly 200 SMA sits without ever switching timeframes.
### 🛠 Key Features
1. **Stepline Accuracy (The "Step" Style):**
* Unlike standard MTF indicators that smooth out lines (creating a repainting illusion), this tool uses a **Stepline** visualization by default.
* **Why it matters:** It shows exactly what the Daily/Weekly value was *at that specific moment in time*. If the line is flat, the higher timeframe bar hasn't closed yet. This offers zero lag and true historical accuracy.
2. **Ultra-Clean Interface:**
* **Status Line Hidden:** We have removed the cluttered list of values (often shown as "Ø Ø Ø") from the chart header. The title remains strictly `MTF MAs `.
* **Data Window:** Exact values are fully accessible via the Data Window or by hovering over the lines.
3. **Dual Groups (D & W):**
* **Daily Group:** EMA 9, EMA 20, SMA 50, SMA 200.
* **Weekly Group:** EMA 9, EMA 20, SMA 50, SMA 200.
* *Note:* By default, only the **Daily 9, 20, and 50** are enabled to keep the chart clean. The SMA 200 and Weekly lines can be enabled in the settings.
### 📚 How to Use
* **Trend Filter:** Use the **Daily EMA 20 (Orange)** as your primary "Line in the Sand". If the intraday price is holding above the Daily 20, the macro trend is bullish.
* **Major Reversals:** The **SMA 200 (Red)** on Daily/Weekly frames acts as major institutional support/resistance. These are high-probability areas for bounces or rejections.
* **Confluence:** Watch for intraday setups (like flags or wedges) that form right on top of a Daily "Step". These setups have higher success rates due to higher timeframe alignment.
### ⚙️ Standardization
* Part of the suite.
* English-native codebase and settings.
* Optimized using `barmerge.gaps_off` for seamless data connectivity.
---
*Disclaimer: This tool is for educational purposes and technical analysis assistance only. Always manage your risk.* Indicator
Sakalau02 Weekly Daily SessionsSakalau02: Weekly Daily Sessions – The Architecture of the Trading Week
The "Sakalau02 Weekly Daily Sessions" is a high-definition visual mapping tool designed to dissect the trading week into distinct daily blocks. More than just a period separator, this script defines the "field of play" for each day, allowing you to visualize where liquidity builds and how price interacts with temporal boundaries.
Here is why this script is the cornerstone of a professional Top-Down analysis:
📅 High-Definition Daily Structure
The indicator transforms your chart into a logical map of the week, providing visual support for all 7 days, with a focus on active trading from Monday to Friday.
Visual Identity: Each day is assigned its own unique color, helping you instantly recognize repetitive market signatures (like the "Tuesday Reversal" or "Mid-week Expansion").
Timezone Precision: Featuring a dedicated Timezone Input, the script ensures that daily boxes open exactly at 00:00 according to your chosen financial hub (UTC, New York, London, etc.).
📐 Range and Liquidity Analysis
Through its Dynamic Box System, the script monitors price evolution in real-time:
High/Low Tracking: Automatically expands the box boundaries as price carves out new daily highs or lows.
The 0.5 Level (Daily Equilibrium): Automatically calculates the midpoint of the entire day. This is the critical "Fair Value" zone where price decides whether to trend or mean-revert.
Open/Close Trajectory: A discreet line tracks price relative to the daily open, providing an instant read on the intraday bias (Bullish/Bearish).
⚡ Precision Alert System
Never miss a structural shift. The indicator comes equipped with built-in alerts for:
Session Starts: Be notified the moment a new daily cycle begins.
Liquidity Sweeps (New High/Low): Receive alerts the second price breaches the current day’s high or low—perfect for executing Judas Swings or Expansion setups.
💎 Versatile Display Modes
Boxes Mode: Encapsulates price for a clear view of market structure.
Zones Mode: Highlights the background for a cleaner integration with secondary indicators.
Timeline Mode: Marks the base of the chart, keeping the price action area completely untouched.
Piața nu este doar preț, este ritm. În timp ce alții se pierd în zgomotul fiecărei secunde, eu definesc limitele zilei. O structură creată pentru traderul care știe că volumul urmează timpul, iar profitul urmează disciplina — păstrați ochii pe echilibrul zilei!" — Semnat, Andrei (Sakalau02) ⏳ Indicator
Sakalau02 Weekly Daily SessionsSakalau02: Weekly Daily Sessions – The Architecture of the Trading Week
The "Sakalau02 Weekly Daily Sessions" is a high-definition visual mapping tool designed to dissect the trading week into distinct daily blocks. More than just a period separator, this script defines the "field of play" for each day, allowing you to visualize where liquidity builds and how price interacts with temporal boundaries.
Here is why this script is the cornerstone of a professional Top-Down analysis:
📅 High-Definition Daily Structure
The indicator transforms your chart into a logical map of the week, providing visual support for all 7 days, with a focus on active trading from Monday to Friday.
Visual Identity: Each day is assigned its own unique color, helping you instantly recognize repetitive market signatures (like the "Tuesday Reversal" or "Mid-week Expansion").
Timezone Precision: Featuring a dedicated Timezone Input, the script ensures that daily boxes open exactly at 00:00 according to your chosen financial hub (UTC, New York, London, etc.).
📐 Range and Liquidity Analysis
Through its Dynamic Box System, the script monitors price evolution in real-time:
High/Low Tracking: Automatically expands the box boundaries as price carves out new daily highs or lows.
The 0.5 Level (Daily Equilibrium): Automatically calculates the midpoint of the entire day. This is the critical "Fair Value" zone where price decides whether to trend or mean-revert.
Open/Close Trajectory: A discreet line tracks price relative to the daily open, providing an instant read on the intraday bias (Bullish/Bearish).
⚡ Precision Alert System
Never miss a structural shift. The indicator comes equipped with built-in alerts for:
Session Starts: Be notified the moment a new daily cycle begins.
Liquidity Sweeps (New High/Low): Receive alerts the second price breaches the current day’s high or low—perfect for executing Judas Swings or Expansion setups.
💎 Versatile Display Modes
Boxes Mode: Encapsulates price for a clear view of market structure.
Zones Mode: Highlights the background for a cleaner integration with secondary indicators.
Timeline Mode: Marks the base of the chart, keeping the price action area completely untouched.
Piața nu este doar preț, este ritm. În timp ce alții se pierd în zgomotul fiecărei secunde, eu definesc limitele zilei. O structură creată pentru traderul care știe că volumul urmează timpul, iar profitul urmează disciplina — păstrați ochii pe echilibrul zilei!" — Semnat, Andrei (Sakalau02) ⏳ Indicator
Indicator
Session, Weekly, Daily LevelsScroll down for hungarian description!
Magyar leíráshoz görgess lejjebb!
Overview
This script provides a unified market structure mapping tool that automatically identifies and visualizes key intraday, daily, and weekly reference levels. It helps traders contextualize price action throughout the trading week by marking true session opens, previous day highs/lows, weekly highs/lows, and weekday opens, all with accurate historical anchoring and correct timezone handling.
What This Script Does
1. Intraday Session Opens (Tokyo, London, New York)
- Detects the exact candle where each session opens.
- Draws horizontal rays with labels.
- Automatically clears lines at the start of each new day.
- Uses a custom local-to-exchange timezone conversion system.
2. Weekly Levels
- Last week high and low (precise bar anchoring, not HTF aggregation)
- Current week open (also Monday open)
- Auto-reset on new week
- Levels are always drawn from the true candle where they formed.
3. Previous Day High & Low
- Continuously tracks intraday highs and lows.
- On a new day, stores yesterday’s values and anchors rays to the exact bars.
- Levels remain visible for the full current day and reset the next day.
4. Weekday Opens (Tue–Fri)
- Captures the exact opening price of Tuesday–Friday.
- Monday open = Week open, so it is not shown separately.
- Auto-reset on new week.
Timezone Logic (Original Feature)
The script converts:
local session times → exchange timezone → chart timestamps
It works correctly regardless of chart timezone or instrument exchange location.
Line Drawing Logic
- Finds the exact bar_index where each level forms.
- Draws rays extending to the right.
- Labels are placed ahead of price.
- Safe updating prevents “bar index too far” errors.
How to Use
- Identify daily/weekly structure.
- Track bias relative to session opens.
- Observe reactions around weekday opens.
- Compare price action to last week's range.
Originality
- Custom timezone conversion engine.
- True historical bar anchoring.
- Fully automated weekly/daily structural resets.
- Independent styling for each level type.
- Not a mashup; all components follow one unified logic.
Limitations
- Does not predict trend or direction.
- Structural tool only.
Summary
A precise and reliable market structure tool that unifies weekly, daily, and intraday reference levels with full timezone automation and true-candle anchoring.
MAGYAR LEÍRÁS
--------------
Áttekintés
Ez az indikátor egy összetett piaci szerkezet-feltérképező eszköz, amely automatikusan megjeleníti a legfontosabb intraday, napi és heti referenciaértékeket. A célja, hogy a kereskedő tisztán lássa a piac aktuális környezetét: hol nyíltak a főbb devizapiaci szekciók, hogyan alakult a tegnapi tartomány, hol volt a múlt heti csúcs/mélypont, és hogyan nyitottak az egyes hétköznapok.
Mit tud a script?
1. Szekciónyitások (Tokyo, London, New York)
- Megkeresi a pontos gyertyát, amely a szekciónyitáskori árat tartalmazza.
- Vízszintes vonalat és címkét rajzol.
- Minden nap elején automatikusan törli a korábbi nap szintjeit.
- Egyedi időzóna-konverziós rendszerrel működik (helyi idő → tőzsdei idő → chart idő).
2. Heti szintek
- Múlt heti maximum és minimum (pontos gyertyapontra horgonyozva)
- Aktuális heti nyitóár (egyben a hétfői nyitó is)
- Új hét kezdetekor automatikusan frissül.
- A múlt heti high/low nem fix időpontra, hanem a valódi gyertyára kerül.
3. Előző napi High és Low
- Folyamatosan követi a napi maximumot és minimumot.
- Napváltáskor elmenti és pontos gyertyáról indítja a ray-t.
- A szintek a teljes nap folyamán megmaradnak, majd a következő nap törlődnek.
4. Hétköznapok nyitóárai (Kedd–Péntek)
- A kedd, szerda, csütörtök és péntek nyitóárát rögzíti és megjeleníti.
- A hétfői nyitó a Week Open, ezért külön nem jelenik meg.
- Heti váltáskor automatikusan törlődnek.
Időzóna-kezelés (egyedi megoldás)
A script a felhasználó helyi idejét átszámítja az instrumentum tőzsdei időzónájára, majd a chartra vetíti.
Ez biztosítja, hogy minden szekciónyitás helyesen jelenik meg, bármely chart vagy instrumentum esetén.
Vonalrajzolási logika
- A szintek a valódi bar_index alapján kerülnek rögzítésre.
- Jobbra nyúló ray-eket rajzol.
- A címkék mindig a jobb oldalon, előre helyezve jelennek meg.
- Biztonságos frissítési rendszer akadályozza meg a hibákat (pl. “bar index too far”).
Használat
- Napi/heti szerkezet meghatározása.
- Bias követése a session openekhez viszonyítva.
- Reakciók figyelése a hétköznapok nyitóárai körül.
- Összevetés a múlt heti tartománnyal.
Eredetiség
- Egyedi időzóna-kezelő motor.
- Igazi gyertyapont-alapú horgonyzás.
- Automatikus napi/heti reset.
- Minden szint külön stílusban konfigurálható.
- Nem mashup; egységes rendszer.
Összegzés
Professzionális, pontos eszköz a piaci szerkezet feltérképezésére, amely egyesíti a heti, napi és intraday szinteket, teljes időzóna-automatizálással és gyertyapontra horgonyzott kijelölésekkel. Indicator
Smart Weekly Lines — Clean & Scroll-Proof (Pine v6)Because your chart deserves structure. Elegant weekly dividers that stay aligned, scroll smoothly, and project future weeks using your wished UTC offset.
Smart Weekly Lines draws precise, full-height vertical lines marking each new week — perfectly aligned to your local UTC offset. It stays clean, smooth, and consistent no matter how far you scroll.
Features
• Accurate weekly boundaries based on your local UTC offset (supports half-hour zones like India +5.5)
• Clean, full-height lines that never cut off with zoom or scroll
• Adjustable color, opacity, width, and style (solid, dashed, dotted)
• Future week projection for planning and alignment
• Optional visibility: show only on Daily and Intraday charts
Works with any market — stocks, crypto, forex, or futures.
Built for traders who value clarity, structure, and precision.
Developed collaboratively with the assistance of ChatGPT under my direction and testing. Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
