Volumes

Best Order Flow Footprint & Delta-Xcelerate Trade Order Flow Footprint & Delta- Developed by Xcelerate Trade | Professional Trading Tools Candle + volume proxy scanner for the Xcelerate Order Flow playbook on PulseWire. This is NOT real bid/ask footprint. The dashboard shows: Proxy = no footprint. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ BEST USED WITH ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Works much better together with: → “Fluid Liquidity Zones - CHoCH + Mitigation + HTF | Xcelerate Trade” (or “Fluid Liquidity Zones - CHoCH | Xcelerate Trade”) Use SUPPLY / DEMAND zones + CHoCH / market structure first, then OF labels as confirmation. GOLDEN RULE Zone (SUPPLY/DEMAND) + structure → then OF1/OF2/OF3 as confirmation — never the reverse. Recommended timeframes: 15m–1h (1m is noisy; more false signals). ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW THE 3 SETUPS WORK ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ OF1 — CONTINUATION (cyan) Idea: trend + stacked impulse + pullback + continuation. Long OF1 when: 1) Bull bias (HH/HL + HTF up if enabled) 2) A bullish impulse / stacked strong bars existed 3) Price pulled back into the impulse zone 4) Confirmation (bullish bar / positive delta proxy) Short OF1 = mirror (bear bias + down impulse + pullback + down confirm). OF2 — ABSORPTION REVERSAL (violet) Idea: sweep of a level + absorption + reclaim. Long OF2 when: 1) Sweep below a low / level (wick down) 2) Absorption (high volume, little progress) 3) Reclaim above the level + upside aggression Short OF2 = sweep above a high → reclaim down. OF3 — BREAK & RETEST (green long / red short) Idea: real volume break → retest → reject. Long OF3: break up → retest broken level as support → rejection up. Short OF3: break down → retest as resistance → rejection down. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW TO READ THE CHART (WITH FLUID LIQUIDITY ZONES) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1) Bias / structure (HH HL / LH LL, CHoCH) — higher-level direction 2) Where price is: DEMAND = long bias area, SUPPLY = short bias area 3) Then OF labels: • DEMAND + OF2 or green OF3 → long candidates • SUPPLY + OF2 or red OF3 → short candidates • OF1 only with the trend (not counter-trend in a range) 4) Dashboard “wait” = no signal on the current bar; older labels stay on history SKIP WHEN • Bias = RANGE and you are not clearly on a zone • Label in the middle of a range with no level • OF1 against SUPPLY/DEMAND • Chaotic OF1+OF2+OF3 overlap with no clear level EXAMPLES • DEMAND + green OF3 / OF2 → look for LONG (after reclaim/confirm) • SUPPLY + red OF3 / OF2 → look for SHORT • Cyan OF1 in uptrend, pullback into DEMAND → continuation LONG • Label only, no zone/structure → DO NOT ENTER LIMITATION PulseWire has no true footprint. Signals are proxies and can be wrong, especially on 1m/3m time frame. Use with Fluid Liquidity Zones for context. Developed by Xcelerate Trade | Professional Trading Tools

Indicator

by xcelerate_trade

VASA Volume Zones vF A volume-by-price profile that shows where trade actually concentrated — the price shelves that tend to act as support, resistance, and magnets. It marks the Point of Control (the single most-traded price) and the Value Area (where the chosen percentage of volume changed hands), for the current session or a fixed lookback. How it works: each bar's volume is distributed to a price row by its typical price, (high + low + close) / 3. The row with the most volume is the Point of Control. The Value Area then expands outward from the POC — always adding the heavier neighbouring row next — until it covers your chosen percentage (default 70%) of total volume. Rows are drawn as a horizontal histogram with the value-area edges (VAH/VAL) and the POC marked. How to use: high-volume nodes near the POC are areas of agreement where price often pauses or reverses; low-volume gaps are areas of disagreement that price tends to travel through quickly. Trading back into a prior value area, or rejecting from its edge, are common contexts. Use session mode intraday and lookback mode for a rolling swing view. Non-repainting: the profile is built only from closed historical bars and drawn on the last bar. The developing session fills in as new volume prints (as any profile must); confirmed history never changes and no future data is used. Educational only — not financial advice. Trading involves substantial risk of loss.

Indicator

VASA VWAP + Institutional Levels Volume-weighted average price with standard-deviation bands, anchored to the session, week, or month. How it works: VWAP is the running sum of price × volume divided by the running sum of volume from the chosen anchor, so it tracks the average price every trade actually paid — the reference institutions watch. The bands are drawn at 1 and 2 standard deviations, computed from the volume-weighted variance (the running sum of price²×volume), so they widen and contract with participation rather than a fixed percentage. How to use: price above the VWAP with room to the upper band favours the long side of the session; stretches to the 2σ bands mark statistically extended moves where mean-reversion or continuation decisions are made. Anchor to the week or month for higher-timeframe context. Non-repainting: VWAP and the bands are cumulative and calculated on closed values — no historical value changes after a bar completes. Educational only — not financial advice. Trading involves substantial risk of loss.

Indicator

Volume Profile Anchored VWAP, AVWAP Bands & Deviation [LunqFX]Most anchored VWAP tools make you drag the anchor by hand, and it goes stale the moment structure changes. This one places the anchor automatically at confirmed swing pivots, wraps it in volume weighted standard deviation bands, hangs the leg's volume profile off the right edge, and then measures whether those bands are being respected on the symbol in front of you. The annotated charts below explain the script's output element by element. ❶ AUTO ANCHORED VWAP An anchored VWAP is only meaningful from a point that mattered. Anchor it at an arbitrary bar and it describes nothing; anchor it where the market last turned and it becomes the average price everyone trading THIS leg is carrying — which is exactly the level they defend. The anchor is placed at confirmed swing pivots, with two guards that matter more than they sound: ▸ MINIMUM LEG — a fresh pivot cannot take over until the running leg has had room to form. Without that rule a cluster of pivots chops the curve into stubs and the VWAP never describes anything. ▸ MAXIMUM LEG — a leg that outlives its usefulness resets rather than growing into a whole-history average. Session, weekly and monthly anchors are available for traders who prefer calendar anchoring. ❷ STANDARD DEVIATION BANDS Around the anchored VWAP the script draws volume weighted standard deviation bands at three depths, filled as a gradient so distance from fair value is readable without measuring. Three details make them behave: ▸ WARM-UP — at the anchor the deviation is zero by definition, so the first bars of every leg would draw as a collapsing funnel. Those bars are still measured; they are simply not drawn. ▸ MINIMUM WIDTH — an ATR floor stops the bands pinching shut during dead stretches. ▸ DISPLAY SMOOTHING — the deviation path is box-filtered for drawing only. The VWAP itself and every statistic use the raw values, so nothing you act on is smoothed. ❸ VOLUME FLOW Each bar's participation is drawn as fine texture reaching inward from the band edges: buy pressure rises from the lower edge, sell pressure falls from the upper one, split by where the bar closed inside its own range. The bands are the baseline, so the leg's pressure reads along the structure instead of on a separate pane. ❹ VOLUME PROFILE OF THE LEG At the right edge the script hangs the volume distribution of the whole leg, split buy against sell, with a seam line at the join and a traced outline. Each bar is binned against its OWN slice of the channel rather than a fixed price grid, so a sloping leg does not smear the distribution — a detail most profile overlays skip, and the reason the shape stays honest on a trending market. ❺ BAND REACTION STATISTICS Bands tell you where price is. They do not tell you what that has meant here. So the script measures it: for every touch of the chosen band inside the current leg it checks whether price returned to the VWAP within your window, and reports the share that did, together with the number of touches. That single number changes how the same picture is read. A leg where touches of the upper band came back to VWAP most of the time is mean-reverting, and the band is a fade. A leg where they did not is trending, and the same touch is continuation. Samples too small to conclude anything from are marked with a tilde rather than presented as a result. ❻ WHAT YOU SEE ON THE CHART ▸ Dashed vertical line with the ANCHOR badge — where the current leg begins. ▸ Three teal bands below and three red bands above, filled as a gradient — deviation depth from the VWAP. ▸ Dark line through the middle — the anchored VWAP itself. ▸ Fine ticks along the band edges — per-bar buy and sell participation. ▸ Horizontal rows at the right edge — the leg's volume profile, teal for buy, red for sell. ▸ Panel — side of the VWAP, distance in σ with a position ruler, the VWAP and band levels, and the reaction statistics. ❼ HOW TO TRADE IT 1 — Read the header. Above or below the anchored VWAP is the leg's bias; the σ figure is how stretched price is right now. 2 — Check the reaction row before deciding what a band touch means. High return rate means the bands are fades. Low return rate means they are continuation. 3 — Use the VWAP as the leg's fair value. Pullbacks into it in the direction of the leg are the cleanest entries this tool produces. 4 — Use the volume profile to find where the leg actually traded. Thin rows are areas price passed through quickly and tends to pass through quickly again. 5 — Watch the anchor. A new anchor means structure turned and the previous leg's levels stopped applying. ❽ NON-REPAINTING This is the part that separates an anchored VWAP from a rolling regression channel, and it is worth being precise about. The anchor is a CONFIRMED pivot and only ever moves forward. A VWAP is cumulative, so once a bar closes its contribution to the average is fixed forever — every band value already printed stays exactly where it is. Nothing is recalculated behind you. Every statistic is built from closed bars only. SETTINGS ▸ Anchor — anchor mode (swing pivot, session, week, month), pivot length, minimum and maximum leg. ▸ Bands — three deviation depths, warm-up bars hidden, minimum width in ATR, display smoothing, gradient fill and VWAP line toggles. ▸ Volume Flow — texture height in ATR and thickness. ▸ Volume Profile — rows, width, thickness, seam and outline toggle. ▸ Band Reaction — which band counts as a touch, the reaction window, optional touch markers. ▸ Visuals — candle colouring, anchor marker, dashboard position. ALERTS — upper band touch, lower band touch, VWAP reclaimed, VWAP lost, and new anchor. All fire on closed bars only. WHY THESE PARTS ARE ONE SCRIPT They describe one object at four resolutions. The anchor defines the leg; the standard deviation bands measure dispersion inside it; the flow and the volume profile show where its volume actually went; and the reaction statistics say whether that structure is being respected. Take the anchor away and the VWAP averages a period nobody traded as a unit. Take the profile away and the bands float above an unknown distribution. Take the statistics away and the bands become decoration you have to interpret by feel. None of them stands alone, which is why they ship together. Works on any symbol with volume — forex, metals, indices, crypto and stocks — on intraday and higher timeframes alike. Symbols without real volume data will report a flat profile. This indicator is an educational market-analysis tool, not financial advice. The reaction statistics describe the recorded historical behaviour of the current leg on the loaded chart; past behaviour does not predict future results. Always confirm with your own analysis and manage your risk.

Indicator

Volume Trend Color This indicator colors volume bars according to trend context instead of individual candle direction. How it works - A moving average of volume defines the reference level (yellow line). - A second moving average on price defines trend direction. - Bars are green when price trades above the trend MA, red when below, and gray when volume falls under the low-volume threshold. Why color by trend rather than by candle Coloring volume by candle direction repeats information already visible on the price chart: a red candle produces a red bar, and nothing is added. Coloring by trend context instead answers a different question, namely whether participation is arriving in the direction the reader is already tracking. A pullback inside an uptrend will show red candles but green volume bars, which makes it easy to separate a pause in an ongoing move from a genuine loss of participation. The neutral gray state marks bars where volume is too low to support either reading. Settings - Volume MA length: reference average for volume. - Low-volume threshold: fraction of the volume MA below which a bar is treated as noise. Raise it to filter more aggressively. - Trend MA length: default 50. Shorten it on fast intraday charts if the color state lags the moves being traded. - Trend MA type: EMA or SMA. - Trend source: price series used for the trend MA. Alerts Two conditions are available: volume above its average while price is above the trend MA, and the same while price is below it. This script is for chart analysis only and is not investment advice.

Indicator

Volume Profile Session Edition The native PulseWire Volume Profile does not work on CFD/OTC brokers like EasyMarkets, OANDA, Pepperstone, and others — because these feeds provide zero or no real volume data. This indicator solves that problem by automatically fetching volume from a liquid proxy symbol that matches your chart instrument. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW IT WORKS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ The indicator detects your chart symbol and automatically selects a real-volume proxy from a regulated exchange: - (60+ instruments mapped automatically) If no proxy is found, it falls back to bar range (High–Low) so the profile always renders regardless of the instrument. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT YOU GET ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔷 Session Volume Profile A classic histogram anchored to each trading session. Bars are split into bullish (up) and bearish (down) volume side by side. The Value Area is highlighted in separate colors for quick reading. 🔷 POC — Point of Control The price level with the highest traded volume in the session. Extends to the right edge of the chart on the current session. 🔷 VAH / VAL — Value Area High & Low Upper and lower boundaries of the configurable Value Area (default 70% of total volume). 🔷 Info Panel Shows the active proxy symbol, current session POC, VAH and VAL prices updated in real time. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SESSION MODES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Day mode (default) One profile per calendar day (UTC). Resets automatically at midnight. Works on any intraday timeframe. Candles mode One profile every N bars. Fully configurable — examples: • 15m chart → 96 candles = 1 full day • 15m chart → 32 candles = 8 hours (London session) • 15m chart → 16 candles = 4 hours ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SETTINGS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Session Settings • Sessions to Show — 1 to 10 past sessions • Session Mode — Day or Candles • Candles per Session — bars per profile in Candles mode • Min Bars to Draw — skip incomplete sessions (weekends, holidays) that have fewer than N bars • Extend POC to Right — current session POC extends to the right edge of the chart Profile Settings • Number of Rows — resolution of the histogram (fewer rows = thicker, more readable bars) • Value Area % — volume percentage defining the VA • Profile Width — histogram width as % of session duration Style • Up / Down volume colors • Value Area Bull / Bear colors (highlighted rows) • POC line color and width • VAH / VAL line colors and visibility Volume Proxy • Auto-detect ON (default) — built-in symbol map • Auto-detect OFF — enter any PulseWire symbol manually ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE BROKERS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ EasyMarkets · OANDA · Pepperstone · IC Markets · FP Markets · Any CFD or OTC feed where native volume profile shows no data ⚠️ DISCLAIMER Volumes displayed are sourced from external proxy symbols (Binance, FX, CME, COMEX, etc.) and do not represent the actual volume of your broker or chart feed. Use for analysis and trend confirmation only. Do not use as the sole basis for trading decisions. Requires PulseWire Pro or above. ⚠️ IMPORTANT: - This indicator uses volume from EXTERNAL SOURCES, not broker volume - Volumes may NOT match what you see on the chart - Use as a secondary tool, as a SUPPLEMENT, not as the sole basis for decisions - It is the user’s responsibility to validate the data

Indicator

by fabricionicolauxx

EVA Ai + POC, Liquidity & Smart Money 1.4.1 RU 💎 EVA Ai + POC, Liquidity & Smart Money 1.4.1 RU — РЫНОК, РАЗЛОЖЕННЫЙ ПО ЦЕНАМ Обычный объём под графиком отвечает на вопрос «сколько проторговали за свечу». EVA Volume Profile PRO показывает другое: на каких ценах проходил основной объём, где рынок принимал стоимость, где оставались пустоты и к каким зонам цена может вернуться за ликвидностью. На одном графике собраны Volume Profile, POC, Value Area, VAH, VAL, HVN, LVN, направленный объём и подтверждённые пулы BSL/SSL. Без сплошной заливки экрана. Профиль остаётся читаемым даже рядом со свечами, а AUTOPILOT подстраивает детализацию под таймфрейм и доступный объём данных. Это инструмент для анализа аукциона и ликвидности. Он не рисует готовые LONG/SHORT-входы и не подменяет риск-менеджмент. Его задача — показать структуру рынка до принятия решения. ━━━━━━━━━━━━━━━━━━━━ ⚡ ЧТО РАССЧИТЫВАЕТ ИНДИКАТОР • Volume Profile — горизонтальное распределение объёма по ценам. • POC — цена с максимальным проторгованным объёмом. • Value Area — диапазон, где сосредоточена выбранная доля объёма; стандартная цель — 70%. • VAH и VAL — верхняя и нижняя границы зоны стоимости. • HVN — узлы высокого объёма, где рынок принимал цену и часто переходил в баланс. • LVN — узлы низкого объёма, через которые цена обычно проходит быстрее либо резко отказывается от уровня. • Up/Down Volume — направленный контекст объёма по свечам младшего таймфрейма. • BSL/SSL — подтверждённые buy-side и sell-side liquidity pools около равных swing high / swing low. • Delta — разница между классифицированным Up Volume и Down Volume внутри выбранного диапазона. • Nearest Liquidity — ближайшие BSL/SSL, расстояние до них в ATR, качество Q и текущее состояние. ━━━━━━━━━━━━━━━━━━━━ 🧭 КАК ЧИТАТЬ ПРОФИЛЬ НА ГРАФИКЕ 1. Начните с положения цены относительно Value Area Цена между VAL и VAH находится в зоне принятой стоимости. Здесь рынок чаще вращается вокруг POC, тестирует HVN и возвращается к балансу. Закрепление выше VAH показывает выход из справедливой стоимости вверх. Закрепление ниже VAL — выход вниз. Сам пробой ещё не является входом: смотрите, удерживается ли граница после ретеста и подтверждает ли движение объём. 2. Найдите POC Яркая розовая линия POC отмечает цену максимальной концентрации объёма. Это главный центр текущего профиля и сильный рыночный магнит. Если цена находится далеко от POC, рынок может продолжить поиск новой стоимости или вернуться к прежнему балансу. Если цена торгуется около POC, преимущество сторон обычно слабее — здесь чаще появляется шум и двусторонняя торговля. 3. Прочитайте форму гистограммы Чем длиннее горизонтальная строка, тем больше объёма прошло на этой цене. Короткая строка означает низкое принятие цены. Основной профиль выполнен в спокойной нейтральной палитре. Тонкая neon-рейка у якоря показывает доминирующую сторону каждой строки: бирюзовый цвет — преимущество Up Volume, розовый — Down Volume. Яркость растёт вместе с дисбалансом. 4. Используйте HVN как зоны принятия Синие HVN-зоны отмечают локальные пики объёма. Здесь цена может замедляться, формировать консолидацию, повторно тестировать уровень или использовать его как поддержку/сопротивление. HVN не исчезает после касания. Это уже проторгованная структура рынка, а не ожидающий стоп-пул. 5. Используйте LVN как коридоры непринятия Янтарные LVN-зоны показывают провалы объёма. Внутри таких участков рынок провёл мало времени, поэтому движение может ускоряться. На границе LVN также возможен резкий отказ, если цена не получает нового объёмного подтверждения. LVN тоже не удаляется после первого теста: он остаётся частью рассчитанного профиля и перестраивается вместе с выбранным диапазоном. 6. Проверьте BSL и SSL BSL формируется над подтверждёнными равными swing high — там часто концентрируются стопы продавцов и ликвидность покупателей. SSL строится под равными swing low, где может находиться ликвидность продавцов. Зона появляется только после подтверждения минимум двух сопоставимых экстремумов и прохождения фильтра качества. В Q учитываются относительный объём, rejection wick и расстояние между подтверждениями. Состояния зон: • FRESH — подтверждённая зона ещё не тестировалась. • TESTED — цена вошла в диапазон, но не прошла его полностью; зона становится визуально слабее. • OFF — пул остаётся в расчёте, но находится за рабочим ATR-радиусом и временно скрыт с графика. • SWEPT — дальняя граница пройдена; зона считается собранной и полностью удаляется. 7. Сверьтесь с Delta Положительная Delta означает, что внутри всего выбранного профиля больше объёма классифицировано как Up Volume. Отрицательная — преимущество Down Volume. Delta относится ко всему диапазону, а не к последней свече. Поэтому текущая красная свеча может находиться внутри положительного профиля — противоречия здесь нет. ━━━━━━━━━━━━━━━━━━━━ 📊 ЧТО ПОКАЗЫВАЕТ ПАНЕЛЬ EVA LIQUIDITY • Autopilot — активна ли автоматическая адаптация. • Auction — цена внутри Value Area, выше VAH или ниже VAL. • Range — Visible Range, Session HD или Fixed Range. • Source — свечи графика либо выбранный Lower Timeframe. • Rows × Step — количество строк и фактический ценовой шаг. • Up / Down — доли направленного объёма. • Delta — суммарный дисбаланс диапазона. • POC / dist — POC и расстояние текущей цены до него. • VAL — VAH — границы справедливой стоимости. • Nearest BSL / SSL — ближайший пул, расстояние в ATR, Q и статус. • Nearest HVN / LVN — ближайшие объёмные узлы. • Structure — верхняя, нижняя или сбалансированная концентрация профиля. • Status — developing-профиль, закрытые свечи либо безопасный fallback источника данных. ━━━━━━━━━━━━━━━━━━━━ ⚙️ ТРИ РЕЖИМА VOLUME PROFILE VISIBLE RANGE Профиль рассчитывается только по свечам, видимым на экране. Изменили масштаб или прокрутили график — расчёт автоматически обновился. Это основной режим для быстрого анализа текущей рыночной структуры. SESSION HD Строит отдельный профиль торговой сессии. Подходит для intraday, day trading и поиска дневных POC, VAH/VAL, HVN/LVN. FIXED RANGE Позволяет исследовать конкретный импульс, накопление, боковик или участок от пробоя до текущей цены. Начало и конец задаются временными маркерами. ━━━━━━━━━━━━━━━━━━━━ 🚀 БЫСТРЫЕ СЦЕНАРИИ ЧТЕНИЯ БАЛАНС Цена внутри Value Area и рядом с POC/HVN. Рынок принимает стоимость. В таком режиме логичнее ждать реакции от границ VA, а не преследовать движение в центре профиля. ПОИСК ЦЕНЫ ВВЕРХ Цена удерживается выше VAH, профиль расширяется вверх, Delta поддерживает покупателей, а впереди находится BSL. Контекст бычий, пока возврат под VAH не отменил выход из стоимости. ПОИСК ЦЕНЫ ВНИЗ Цена закрепляется ниже VAL, Down Volume усиливается, а ближайшая SSL расположена ниже. Медвежий контекст сохраняется, пока цена не вернулась внутрь Value Area. БЫСТРОЕ ПРОХОЖДЕНИЕ Цена входит в LVN без встречного объёма. Внутри низкообъёмного коридора движение может ускориться до следующего HVN, границы VA или активного liquidity pool. СБОР ЛИКВИДНОСТИ Цена проходит дальнюю границу BSL/SSL, пул удаляется, затем рынок показывает принятие либо отказ. Оценивайте реакцию свечей, объём и положение относительно VAH/VAL — сам sweep не гарантирует разворот. ━━━━━━━━━━━━━━━━━━━━ 🧠 AUTOPILOT И ТОЧНОСТЬ РАСЧЁТА AUTOPILOT автоматически выбирает младший таймфрейм, плотность строк, пороги HVN/LVN, параметры pivot и минимальное качество liquidity pools. Developing-профиль обновляется по мере поступления новых данных. Для более точного распределения объёма индикатор может использовать Lower Timeframe OHLCV. Если младшие данные недоступны или неполны, система переключается на полный набор свечей текущего графика без скрытой обрезки диапазона. EVA использует объём, который предоставляет источник данных выбранного инструмента. Для Forex это часто tick volume. Pine Script не даёт исторический биржевой стакан и полноценный bid/ask footprint, поэтому индикатор не выдумывает такие данные: направленный объём рассчитывается по движению свечей младшего таймфрейма. Подтверждённые BSL/SSL создаются по закрытым pivot-событиям и не дорисовываются задним числом на более ранних барах. Visible Range и developing-профиль закономерно пересчитываются при изменении диапазона или поступлении новой свечи — это нормальная работа динамического Volume Profile. ━━━━━━━━━━━━━━━━━━━━ ⚠️ РИСК EVA Volume Profile PRO — аналитический инструмент для PulseWire. Он не исполняет сделки и не является индивидуальной инвестиционной рекомендацией. Любой рынок связан с риском; окончательное решение, размер позиции и проверка сценария остаются за трейдером. ━━━━━━━━━━━━━━━━━━━━ 🔥 ХОТИТЕ ПЕРЕЙТИ ОТ КАРТЫ ЛИКВИДНОСТИ К ГОТОВОМУ ТОРГОВОМУ СЦЕНАРИЮ? EVA AI Plus объединяет подтверждённые LONG/SHORT-сигналы, Market Structure, Liquidity Sweep, Smart Money, Support/Resistance, Supply/Demand, Fair Value Gaps, Whale Volume, фильтры качества, AI Advisor, TP/SL, Trail, TP+ и внутреннюю статистику в одном рабочем пространстве PulseWire. Откройте премиальный EVA AI Plus, добавьте его в избранное и запросите доступ к 7-дневному тест-драйву: ⚠️🔥Картинка является ссылкой. КЛИКНИТЕ по картинке для открытия индикатора!!! _________________________________________ 💎 EVA VOLUME PROFILE PRO — SEE WHERE THE MARKET ACCEPTED PRICE Volume bars below a chart tell you when activity happened. EVA Volume Profile PRO shows where it happened. The indicator maps traded volume across price, calculates POC and the Value Area, detects HVN/LVN structure, tracks directional volume and builds confirmed BSL/SSL liquidity pools. The result is a clean auction map for traders who use Volume Profile, Smart Money concepts, market structure and liquidity analysis — without flooding the candles with heavy color. Use it for stocks, crypto and Forex, from scalping and intraday trading to swing analysis. AUTOPILOT adapts the lower timeframe, row density, node thresholds and liquidity-quality filters to the active chart. This is a market-reading tool, not a LONG/SHORT signal generator. Its job is to show where value sits, where price may accelerate and where confirmed liquidity remains active before you build a trade plan. ━━━━━━━━━━━━━━━━━━━━ ⚡ CORE MARKET MAP • Volume Profile — horizontal volume distribution by price. • POC — the price row with the highest calculated volume. • Value Area — the price range containing the selected share of total volume; 70% is the standard target. • VAH / VAL — upper and lower Value Area boundaries. • HVN — high-volume acceptance nodes where price may slow, balance or retest. • LVN — low-volume rejection corridors where price can travel quickly. • Up / Down Volume — directional volume context classified from lower-timeframe candles. • Delta — the difference between classified Up Volume and Down Volume across the profile. • BSL / SSL — confirmed buy-side and sell-side liquidity pools around equal swing highs and lows. • Liquidity Quality Q — a quality score using relative volume, rejection wick and spacing between confirmations. • Nearest Targets — closest BSL, SSL, HVN and LVN with ATR distance and live state. ━━━━━━━━━━━━━━━━━━━━ 🗺 HOW TO READ THE CHART START WITH VALUE Price between VAL and VAH is trading inside accepted value. This is usually a two-sided auction: POC attracts price, HVNs can hold rotation and the center of the profile often produces more noise than its edges. Holding above VAH signals price discovery above value. Holding below VAL signals price discovery below value. A single breakout is not enough on its own — watch whether the boundary survives a retest and whether directional volume supports the move. READ THE POC The bright magenta POC marks the highest-volume price in the selected range. It acts as the profile’s center of gravity. Price close to POC is usually balanced. Price far from POC may be building a new area of value or preparing a rotation back toward the old one. Context decides which path is active. READ THE PROFILE SHAPE Long horizontal rows represent heavier participation. Short rows show low acceptance. The main histogram uses a restrained neutral palette. A thin neon rail at the profile anchor shows row-level direction: teal for Up Volume dominance, pink for Down Volume dominance. Stronger imbalance produces a brighter rail without recoloring the entire histogram. HVN — ACCEPTANCE Blue HVN zones mark local volume peaks. These are areas where the market previously agreed on price. Expect slower movement, consolidation, support/resistance behavior or repeated tests. An HVN does not disappear after a touch. It represents completed volume structure, not uncollected stops. LVN — REJECTION AND FAST TRAVEL Amber LVN zones mark local volume valleys. Price spent less time there, so movement may accelerate through the corridor until it reaches the next HVN, Value Area boundary or active liquidity pool. LVNs remain part of the calculated profile and update when the selected range changes. BSL / SSL — CONFIRMED LIQUIDITY BSL appears above confirmed equal swing highs, where short stops and breakout liquidity can cluster. SSL appears below confirmed equal swing lows, where long stops and sell-side liquidity may sit. A pool requires at least two comparable confirmed pivots and must pass the adaptive Q filter. The script does not print every high and low as “liquidity.” Liquidity states: • FRESH — confirmed and not yet tested. • TESTED — price entered the zone without completing the full sweep; the zone fades. • OFF — still calculated but outside the active ATR work radius, so it is hidden from the chart. • SWEPT — price cleared the far boundary; every drawing for that pool is deleted. ━━━━━━━━━━━━━━━━━━━━ 📊 THE CALCULATED DASHBOARD AUTOPILOT Shows whether adaptive mode is active and which lower timeframe is selected. AUCTION Reports whether price is inside Value Area, above VAH or below VAL. RANGE / SOURCE Displays Visible Range, Session HD or Fixed Range and confirms whether calculations use chart candles or lower-timeframe data. ROWS × STEP Shows the actual number of profile rows and price increment. You always know the resolution behind the map. UP / DOWN AND DELTA Displays directional volume shares and the net profile imbalance. POC / DIST Shows POC and the current price distance from it. NEAREST BSL / SSL Shows pool price, distance in ATR, Q score and FRESH, TESTED or OFF state. NEAREST HVN / LVN Locates the closest acceptance node and fast-travel corridor. STRUCTURE Classifies the profile as upper concentration, lower concentration or balanced. STATUS Confirms developing mode, closed-bar mode or a safe data fallback. ━━━━━━━━━━━━━━━━━━━━ ⚙️ THREE VOLUME PROFILE MODES VISIBLE RANGE Calculates only the candles currently visible on the screen. Zoom or scroll and the profile rebuilds around the market structure you are actually studying. SESSION HD Creates a separate profile for each selected trading session. Useful for intraday POC, daily Value Area, opening rotations and session-based support/resistance. FIXED RANGE Measures one specific impulse, consolidation, breakout leg or accumulation range between two adjustable time markers. ━━━━━━━━━━━━━━━━━━━━ 🎯 PRACTICAL READING SCENARIOS BALANCED AUCTION Price is inside Value Area and close to POC or an HVN. The market is accepting price. Chasing the middle of the profile offers less structural clarity than waiting for a reaction at VAH, VAL or a nearby liquidity zone. BULLISH PRICE DISCOVERY Price holds above VAH, directional volume remains constructive and BSL is active overhead. The bullish auction remains valid while price accepts above value; a return below VAH weakens that read. BEARISH PRICE DISCOVERY Price holds below VAL, Down Volume expands and an SSL pool remains below. The bearish auction stays active until price regains the Value Area. LVN TRAVEL Price enters an LVN without opposing participation. The low-volume corridor may provide a faster route toward the next HVN, POC, VA boundary or liquidity target. LIQUIDITY SWEEP Price clears the far edge of BSL or SSL and the pool disappears. The next question is acceptance or rejection: check candle response, volume, Delta and location relative to VAH/VAL. A sweep alone does not guarantee reversal. ━━━━━━━━━━━━━━━━━━━━ 🧠 AUTOPILOT, LOWER TIMEFRAME DATA AND INTEGRITY AUTOPILOT adjusts lower-timeframe selection, row density, HVN/LVN thresholds, pivot sensitivity, pool width, minimum Q and the visible ATR radius. The developing profile updates as new confirmed microbars arrive. Lower-timeframe OHLCV improves price allocation inside each chart candle. If the requested intrabar history is unavailable or incomplete, EVA falls back to the complete chart-candle sample rather than silently using a truncated profile. The script uses the volume supplied by the active symbol’s data feed. On some markets, especially Forex, that may be tick volume. Pine Script cannot access a historical exchange order book or full bid/ask footprint, so EVA does not fabricate either one. The directional rail is an order-flow-style approximation derived from lower-timeframe candle direction. Confirmed BSL/SSL pools are created from closed pivot events and are not backfilled onto earlier bars. Visible Range and developing profiles recalculate when the viewport or incoming data changes — expected behavior for a dynamic Volume Profile, not a historical trading signal being rewritten. ━━━━━━━━━━━━━━━━━━━━ ⚠️ RISK NOTICE EVA Volume Profile PRO is an analytical PulseWire indicator. It does not execute orders and is not financial advice. Markets involve risk. Every setup requires independent validation, position sizing and risk management. ━━━━━━━━━━━━━━━━━━━━ 🔥 READY TO TURN THE LIQUIDITY MAP INTO A COMPLETE TRADE SCENARIO? EVA AI Plus combines confirmed LONG/SHORT signals, Market Structure, Liquidity Sweeps, Smart Money context, Support/Resistance, Supply/Demand, Fair Value Gaps, Whale Volume, signal-quality filters, AI Advisor explanations, TP/SL, Trail, TP+ and internal statistics in one premium PulseWire workspace. Open EVA AI Plus, add it to your favorites and request access to the 7-day test drive:

Indicator

EVA Ai+ Auto Chart Patterns - Price Action & Trading Signals EN 🧬 EVA AI Chart Pattern Scanner is an advanced price action and technical analysis indicator designed to automatically detect high-value chart patterns directly on the PulseWire chart. Instead of manually searching through hundreds of candles, the indicator continuously analyzes market structure, confirmed pivot points, volatility, pattern geometry, volume behavior and breakout conditions. The result is a clean visual map of developing and confirmed trading setups. 🔍 PATTERNS DETECTED The indicator automatically identifies: • Bull Flags and Bear Flags • Bullish and Bearish Pennants • Symmetrical Triangles • Ascending Triangles • Descending Triangles • Rising Wedges • Falling Wedges • Double Bottom patterns • Double Top patterns • Head and Shoulders • Inverse Head and Shoulders Both local MICRO patterns and larger MACRO market structures can be detected. ⚡ INTELLIGENT PATTERN SCANNING EVA AI does not rely on one fixed pattern length. The scanner evaluates multiple market windows and compares available structures by geometry, compression, trend context, pole strength, volatility and overall pattern quality. This adaptive approach allows the indicator to detect compact intraday formations as well as larger swing trading patterns. When two independent structures exist at the same time, the indicator can display both instead of hiding one valid setup behind another. 📐 PREMIUM CHART VISUALIZATION Developing patterns are displayed directly on the chart with projected boundaries and optional transparent pattern zones. Confirmed patterns become brighter after a valid closed-candle breakout. Depending on the detected structure, the chart may display: • Pattern boundaries • Pivot point labels • Neckline levels • Calculated apex projections • LONG or SHORT breakout labels • Pattern quality score • MICRO or MACRO classification • Measured price targets • Target guide lines Every pattern family has its own visual style and color, making complex market structure easier to read. 🎯 CLOSED-CANDLE BREAKOUT CONFIRMATION LONG and SHORT signals are generated only after the required breakout has been confirmed on a closed candle. The script does not use lookahead, future market data or historical signal backfilling. This means a confirmed signal is fixed on the candle where the breakout condition is actually validated rather than being drawn retrospectively on an earlier candle. 📊 PATTERN QUALITY FILTER Every detected structure receives an internal quality score from 0 to 100. The score evaluates factors such as: • Pattern geometry • Price compression • Strength of the preceding movement • Pattern proportions • Pivot symmetry • Breakout candle strength • Volume behavior • MICRO or MACRO structure priority Separate quality thresholds are available for developing patterns and confirmed trading signals. Raise the threshold to receive fewer but more selective setups. Lower it to increase pattern coverage. 📈 VOLUME AND BREAKOUT FILTERS Optional volume filters can be used to evaluate consolidation volume and breakout activity. Traders can choose whether volume should contribute to the quality score or become a strict confirmation requirement. This makes the indicator adaptable to stocks, cryptocurrency, forex, futures, indices and other liquid markets. 🧠 REVERSAL PATTERN ENGINE Double Top, Double Bottom, Head and Shoulders and Inverse Head and Shoulders patterns are analyzed through confirmed pivot sequences. The engine evaluates: • Distance between pattern points • Relative height and depth • Time symmetry • Shoulder proportions • Head dominance • Neckline slope • Prior directional price movement • Breakout candle body • Pattern lifetime A separate MACRO pivot stream helps detect large reversal structures that may otherwise be hidden by smaller market noise. 🔺 TRIANGLE AND WEDGE DETECTOR Triangles and wedges are selected from multiple pivot combinations rather than only the most recent four turning points. The scanner compares slope direction, boundary convergence, initial pattern height, final compression and projected apex distance. This improves the detection of larger chart formations while filtering weak or geometrically invalid structures. 🛠 FLEXIBLE SETTINGS The indicator includes detailed controls for: • Minimum and maximum pattern length • Pivot sensitivity • MICRO and MACRO pattern detection • Pattern quality thresholds • Breakout confirmation buffer • Breakout candle strength • Volume confirmation • Pattern projection length • Target calculation • Pattern colors and transparency • Maximum number of displayed structures • Signal cooldown • Developing pattern visibility Default settings are balanced for general chart analysis, while experienced traders can create stricter profiles for scalping, day trading or swing trading. 💡 HOW TO USE 1. Add the indicator to a standard candlestick chart. 2. Watch the developing structure and its projected boundaries. 3. Check the pattern type, direction and quality score. 4. Wait for a confirmed closed-candle breakout. 5. Use the calculated target as a technical reference. 6. Confirm the setup with trend direction, liquidity, support and resistance, volume and personal risk management. The indicator can be used as a chart pattern scanner, breakout indicator, price action tool, market structure detector and technical analysis assistant. It is suitable for traders working with crypto, forex, stocks, futures and indices across intraday and higher timeframes. ⚠️ IMPORTANT This indicator is an analytical tool. It does not guarantee profitable trades and should not be treated as financial advice. Always evaluate market conditions, liquidity, volatility and risk before entering a position. 🚀 NEED A COMPLETE TRADING INDICATOR? EVA AI+ combines market structure, liquidity zones, trend analysis, momentum confirmation and high-quality LONG/SHORT signals in one advanced trading system. The indicator helps traders read market direction, locate liquidity, identify potential entries and manage trades with clearly structured Take Profit, Stop Loss and trailing logic. ✅ Stocks, Crypto, Forex and Futures ✅ Intraday and Swing Trading ✅ Market Structure and Liquidity Analysis ✅ LONG and SHORT Trading Signals ✅ Free Test Drive Available 🔥 Get EVA AI+ and request your FREE TEST DRIVE:

Indicator

Volume with Bill Williams Market Facilitation Index Coloring Volume indicator with Bill Williams Market Facilitation Index (BW MFI) coloring. This indicator applies Bill Williams' BW MFI color logic to volume analysis by comparing price range changes (High-Low) and volume changes. Market states: 🟢 Green — Range Up + Volume Up Increasing range and increasing volume indicate strong market activity and participation. 🔵 Blue — Range Up + Volume Down Price range expands while volume decreases, showing movement with weaker participation. 🩷 Pink — Range Down + Volume Up Volume increases while price range decreases, indicating a possible battle between buyers and sellers. 🟤 Brown — Range Down + Volume Down Both range and volume decrease, showing reduced market activity. Features: • BW MFI color-based volume analysis • Optional Volume Moving Average • Customizable colors Based on Bill Williams' Market Facilitation Index methodology.

Indicator

Volume DNA: Heatmap [BigBeluga]🔵 OVERVIEW The Volume DNA: Heatmap is an advanced technical indicator created by BigBeluga to decode institutional volume and price action dynamics using market microstructure principles. Traditional volume indicators often look at volume in isolation, failing to account for the efficiency or inefficiency of price movement. In order to provide a solution to this problem, this indicator combines rolling volume Z-scores with high-low price spread Z-scores, classifying every single bar into distinct institutional signatures—such as Absorption, Effort, Exhaustion, and Stagnation. The indicator aims to visualize institutional accumulation, distribution, and exhaustion points directly on the chart. The core element of its calculation involves tracking volume and spread deviations against rolling means defined as: volZ = (volume - volMean) / volStd spreadZ = (spread - spreadMean) / spreadStd where volMean and spreadMean are moving averages over lookback lengths volLengthInput and spreadLengthInput , and volStd and spreadStd represent standard deviations. Higher values of volThreshInput and spreadThreshInput allow the indicator to filter out random market noise and isolate major institutional footprints. 🔵 FEATURES The system utilizes a multi-layered matrix structure to provide actionable market intelligence: 1 — DNA Engine & Classification Matrix Absorption ( ABS ): Triggered by high volume and narrow spread via highVol and narrowSpread , signaling institutional limit orders absorbing market flow. Effort Bullish / Bearish ( EFF+ / EFF- ): Triggered by high volume and wide spread via highVol and wideSpread , signaling aggressive buying or selling pressure driving trend continuation. Exhaustion ( EXH ) & Stagnation ( STG ): Tracks low volume relative to price spreads to identify thin liquidity moves or equilibrium consolidation phases. 2 — Visual Enhancements & Ghost Glows Ghost Glow Effect: Renders a semi-transparent wider candle behind classified DNA bars using plotcandle(showGlowBar ? bodymax + glowExpand : na, ...) to visually distinguish key events from normal price action. Liquidity Clouds: Draws transparent box zones over Absorption bars extending cloudExtendInput bars to the right, marking where institutional limit orders may be resting. 3 — Real-Time Barcode Tape & Statistics Tables DNA Barcode Tape: Displays a vertical heatmap table on the chart showing the DNA type and volume of the last tapeRowsInput bars as a real-time institutional activity tape. Stats Panel Table: Summarizes current bar status, Volume Z-Scores via str.tostring(volZ, "#.##") , and Spread Z-Scores for instant quantitative feedback. 🔵 HOW TO USE Apart from the basic visualization of institutional volume signatures, this tool can also act in alternative ways to support decision-making: Spot Institutional Absorption: Look for ABS candles and their accompanying Liquidity Cloud zones to identify potential support or resistance levels where large market participants are absorbing flow. Ride Trend Continuations via Effort: Monitor EFF+ and EFF- signal shapes (where size and color intensity scale with volume Z-scores) to confirm aggressive momentum driving price in the direction of the breakout. Anticipate Reversals with Exhaustion: Watch for EXH signals where price moves on thin liquidity, signaling that a current trend may be running out of fuel and nearing a pullback or reversal. 🔵 NOTES Why this implementation is unique: It merges volume and price spread analytics using statistical Z-scores rather than arbitrary thresholds, offering an objective look at market efficiency. The multi-table interface provides both historical sequencing (Barcode Tape) and real-time metric tracking without crowding the main price action view. The script is fully optimized for Pine Script version 6, utilizing high-performance array management (`var array dnaHistory = array.new(tapeRowsInput, 0)`) for smooth execution across extensive historical data. Note: The indicator relies on rolling standard deviation calculations; initial chart loads require enough bars to populate the lookback window accurately.

Indicator

Smart Money Volume Absorption Signals I EonMetrics Smart Money Volume Absorption Signals Volume Absorption marks a specific situation as a LONG or SHORT setup, with an entry, a stop and two targets. But instead of only printing an arrow and leaving you to reconstruct what happened, it tracks that setup through four stages and shows you exactly how far along it is — how many conditions are met, which one is still missing, how many bars are left before the setup is discarded, and what the same sequence has already done on the history your chart has loaded. 🔶 THE SITUATION IT TRACKS A bar trades far more volume than its own recent normal, and then closes at the wrong end of its own range. Heavy participation that failed to pay the side that pushed: effort without result. The direction is set against the side that was absorbed — a heavy bar closing in the bottom third of its range is a short premise, one closing in the top third is a long premise. One thing has to be said plainly, because it decides how much weight this premise deserves: total volume cannot tell you who traded. It cannot separate buyers from sellers. What this gate actually measures is heavy participation combined with a failure to hold the direction the bar travelled. The absorption reading is an interpretation of that pattern, not a measurement of order flow. If you want that distinction to matter less, the remaining three gates are where the work is done. Absorption on its own happens constantly and most of it leads nowhere. So the tool requires three further confirmations, in order, before it marks anything. 🔶 THE FOUR GATES G1 · ABSORPTION — bar volume lands in an extreme percentile of its own recent history while the bar closes in the far third of its own range. This gate fixes the direction and nothing later can change it. It also plants the invalidation anchor at that bar's extreme. Optionally the direction must agree with a slow trend filter. G2 · REACTION — a following bar closes in the direction G1 set. The absorption produced something instead of merely stalling. G3 · EXPANSION — a candle body in the top percentile of its own recent history, pointing the setup's way. That candle's OPEN becomes the origin level, and the origin level is where entry would be. G4 · HOLD — price returns to the origin level and closes without violating it. Only now does the signal print, on bar close. This is a retest model, not a breakout model, and the consequence is worth stating before you use it. A setup whose expansion runs away and never comes back to the origin level will never complete, no matter how far the move goes. You will see setups sit at 3/4 while price travels past the drawn targets, and then expire. That is the design working as intended — the entry is the retest — but if you want a tool that chases the move instead, this is not that tool. The dashboard reads: which stage the setup is in, the direction, which gate is being waited on, the expiry countdown, the entry and stop levels, and the record of every completed setup on the loaded history. 🔶 ORIGINALITY Five design decisions separate this from a stack of conditions with an AND between them. Percentiles instead of ATR multiples. A fixed "1.5 × ATR" or "2 × average volume" threshold means something different in a trending market than in a compressed one, so it has to be re-tuned per symbol and per period. Every threshold here is a percentile rank against the instrument's own recent history — "top 30% of the last 200 bars" keeps its meaning when volatility changes, without tuning. Gates do not add up to a score. Each gate is a separate class of evidence and none substitutes for another. Three expansion bars in a row are still 1/4, not 3/4. A weighted-sum model can be outvoted by one loud condition repeating itself; this one cannot. There is deliberately no confidence percentage anywhere in this script — with four binary gates in a fixed sequence, the only honest information is how many of them have filled, and dressing that up as a percentage would add precision that does not exist. The setup dies on its own. Every tracked setup carries an invalidation anchor (a close beyond the absorption bar's extreme) and a bar countdown that resets at each gate advance. When either fires, the setup is discarded immediately — it does not linger until an opposite signal replaces it, and it does not quietly stay on the books. One setup at a time. While a completed setup is still resolving toward its target or its stop, a new setup will not complete — it waits at 3/4 and may still fire later if the first one resolves in time, or expire if it does not. This exists so that what the dashboard counts is what a person following the tool could actually have taken, one position at a time, rather than an overlapping stack of positions nobody could hold. It shows its own record. The last two rows of the dashboard walk every completed setup on the chart you are looking at, bar by bar, and count which level price reached first — Target 1 or the stop. The stop is checked before the target, so a bar that spans both counts against the setup, and the bar the signal prints on is not counted at all. That number is whatever it is. It is not a claim, it is not tuned to flatter, and it will read differently on every symbol and timeframe you load — which is exactly the point. You are meant to check it on YOUR instrument before deciding what the tool is worth to you, instead of taking anyone's word for it. Most signal tools do not show this. That is a choice they made, and this is a different one. 🔶 HOW IT IS CALCULATED Both percentile ranks are ta.percentrank() over one configurable window — one on bar volume (G1), one on the absolute candle body (G3). The close position is (close − low) / (high − low), so it describes where the bar finished inside its own range rather than relative to any external level. The optional trend filter is a plain exponential moving average of the closing price on the chart's own timeframe, used as a slow-trend proxy: long setups are only allowed above it, short setups only below it. Set its length to 0 to switch it off. There are no higher-timeframe data requests anywhere in this script. Entry is the open of the expansion bar. The stop is the absorption bar's extreme, plus an optional buffer in ticks. Both targets are multiples of that entry-to-stop distance, so they scale with the setup instead of with a fixed price amount. Target 1 is the level the record row measures against; Target 2 is drawn for reference only. Every gate is evaluated and latched on confirmed bars only. There is no lookahead and there are no forward-looking references. A filled gate is never un-filled retroactively; the live bar can only be rejected, never rewritten. A bar that would satisfy two gates at once advances the setup by exactly one step — each gate has to be paid for with its own bar. The chart geometry is redrawn from scratch on the last bar rather than accumulated, so what you see on the chart is always the setup the dashboard is describing, and closed setups do not leave debris behind. 🔶 ALERTS Six conditions: setup reached 2/4, setup reached 3/4, signal LONG, signal SHORT, setup expired, setup invalidated. The staged alerts follow from the same idea as the meter: being told a setup is one gate away is more useful than only being told after it is over. 🔶 HOW TO USE 1. Read the record row before anything else. Load your instrument and your timeframe and see what it says there. If it does not convince you, that is the tool telling you honestly that it is not for that market. 2. Check the sample size in the same row. A run of ten or twenty setups is an anecdote. The row flags small samples for exactly this reason. 3. Watch the meter, not the arrows. Most of the information is in setups that reach 2/4 or 3/4 and then die — that tells you what the market is refusing to do. 4. The stop sits at the absorption bar's extreme by default, which is tight. On fast intraday charts try the Stop Buffer input and watch how the record row responds. 5. The trend filter changes the population of setups substantially. Check the record row with it on and with it off on your own market before deciding which you prefer. 6. Set the 3/4 alert if you want to be at the chart before a setup completes rather than after. 🔶 SETTINGS Volume (percentile window) · Gate Thresholds (G1 volume percentile, G1 close position, G3 body percentile, trend filter length, setup TTL) · Trade Levels (draw toggle, stop buffer in ticks, two R-multiple targets) · Display (dashboard and position, current-signal marker, all-past-signals marker, colors). 🔶 HONEST LIMITATIONS Volume alone cannot be attributed to buyers or sellers. This tool reads total bar volume against the bar's close position. It does not know who traded, and it is not order-flow data. Treat the absorption premise as a reading of effort against result, which is what it is. The volume itself is only as good as the feed. On spot forex and CFDs the exchange reports TICK volume rather than real traded volume, so the percentile ranks describe activity rather than quantity. On symbols with no volume data at all the gates cannot fill, and the dashboard says so in its top-right corner. The retest requirement will cost you moves. As described above, setups that never return to the origin level expire unfilled even when price travels well beyond the drawn targets. This is structural, not a bug, and on strongly trending stretches it happens often. Percentiles are relative to their window. After an abrupt change of volatility regime the ranks need a few dozen bars to catch up, and during that stretch the thresholds are still measuring the old regime. The record row is an honest count, not a backtest. It assumes a fill at the exact entry price and it ignores fees, spread and slippage — all of which work against you in reality, and all of which matter a great deal when the outcome is close to even. A record that looks positive before costs can be negative after them. It also covers only the setups on the history your chart has loaded, which on intraday timeframes is a small sample. Results vary far more between markets than between settings. The same script on the same timeframe can produce a very different record on two different symbols, and there is no timeframe this tool is generally "best" on. Any suggestion otherwise would be an invention. Check your own market. This tool describes a sequence of conditions in price and volume. It does not forecast anything, it makes no claim about how often the sequence resolves favourably, and the drawn levels are the geometry of the setup, not a recommendation. It is published for analysis and education, it is not financial advice, and past behaviour of a pattern does not guarantee its future behaviour. Check the record on your own market, manage your own risk, and decide for yourself. Part of the EonMetrics toolset.

Indicator

SNIPERS CANDLES SNIPERS CANDLES SNIPERS CANDLES is an enhanced PVSRA volume analysis indicator that classifies candles according to relative trading activity while introducing a configurable Volume Participation Baseline for additional market participation analysis. The indicator combines traditional PVSRA candle classification with an independent participation threshold, allowing traders to compare current trading activity against both recent market behaviour and configurable average volume levels within a single visual tool. How the Indicator Works The indicator analyses volume using the PVSRA methodology and classifies each candle into one of three participation levels. Normal Volume Represents standard market participation. 150% Volume Highlights candles where volume exceeds approximately 150% of the recent average, indicating increasing market participation. 200% Volume (Vector Candle) Highlights candles where volume exceeds approximately 200% of the recent average or produces exceptional volume relative to recent price range activity, identifying significant market participation. Bullish and bearish candles are colour coded independently to preserve directional context. Volume Participation Baseline In addition to standard PVSRA candle classification, SNIPERS CANDLES includes a configurable Volume Participation Baseline. The Participation Baseline calculates an average volume over a user-defined lookback period and applies an optional multiplier to create a dynamic participation threshold. This allows traders to compare current trading activity against configurable average participation levels rather than relying solely on fixed PVSRA classifications. The Participation Baseline is designed to complement the original PVSRA methodology by providing additional context when market participation transitions between below-average and above-average volume. Instrument Override For cryptocurrency markets, the indicator can automatically retrieve volume data from the equivalent Binance Perpetual Futures contract when available. Where an equivalent perpetual contract is unavailable, the indicator automatically falls back to the chart's native volume data. A manual symbol override is also included for users who wish to specify an alternative volume source. Features Traditional PVSRA candle classification 150% and 200% vector candle detection Independent bullish and bearish candle colouring Configurable Volume Participation Baseline Adjustable Participation Baseline lookback period Configurable Participation Baseline multiplier Customisable Participation Baseline colour and width Automatic Binance Perpetual Futures volume support Manual volume source override Main-chart candle colouring Colour-coded volume histogram Configurable alerts Alert Conditions The indicator includes alert conditions for: Any Vector Candle Any 200% Volume Peak Vector Candle Any 150% Volume Rising Vector Candle Bullish 200% Vector Candle Bearish 200% Vector Candle Bullish 150% Vector Candle Bearish 150% Vector Candle Volume Crossing the Participation Baseline Volume Crossing Above the Participation Baseline Volume Crossing Below the Participation Baseline Participation Baseline alerts are designed to identify changes in market participation as trading activity transitions above or below the configured threshold. Intended Use SNIPERS CANDLES is designed to provide visual context for analysing: Relative market participation High-volume trading activity Volume confirmation Market momentum Trend participation Price action Multi-timeframe analysis The indicator is intended as an analytical tool and does not generate automatic buy or sell signals. It is designed to complement the trader's own market analysis, price action and risk management process. Markets The indicator can be applied to all PulseWire-supported markets, including: Forex Indices Commodities Cryptocurrencies Equities When enabled, cryptocurrency markets can automatically utilise Binance Perpetual Futures volume where available. Disclaimer This open-source indicator is provided free of charge for educational and analytical purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. Users remain responsible for their own analysis, trading decisions and risk management. Created by Market Sniper HQ Trade Like a Sniper, Not Like the Crowd.

Indicator

by MARKET-5NIPER

Simple Volume Pro - HVE/HVY/HVQ Simple Volume Pro — HVE/HVY/HVQ Liquidity & Volume Classifier A volume analysis tool that goes beyond a plain volume histogram — it classifies every bar into meaningful categories (Pocket Pivots, Dry Volume, High Up/Down Volume, Power Volume) and automatically flags historic volume extremes directly on the chart, so you can spot institutional activity and liquidity shifts at a glance. Core Features: Color-coded volume bars — instantly distinguishes: Blue: Pocket Pivot Volume (up-day volume exceeding the highest down-day volume of the recent lookback window) — a classic sign of institutional accumulation. Green / Red: Up-day and down-day volumes exceeding the moving average — highlighting days with real participation. Orange: Dry volume — days with abnormally low turnover, often preceding a breakout. Grey: everything else, kept deliberately muted so the signal bars stand out. Highest Volume tags (HVE / HVY / HVQ) — automatically labels the bar that set a new All-Time High (HVE), Yearly High (HVY), or Quarterly High (HVQ) in volume. Each bar shows only its highest-tier tag (an all-time high is never also double-labeled as a yearly/quarterly high), keeping the chart clean and easy to read at a glance. Lowest Volume tags (Y / Q) — flags yearly and quarterly volume lows with a minimal single-letter marker sitting just above the bar, so unusually dry stretches are visible without cluttering the pane with numbers. IPO / Listing Day Exclusion — a stock's first trading day (IPO listing, or a demerged entity's first session) often prints an abnormal volume spike that skews averages and can falsely trigger record-high tags for months afterward. This indicator lets you exclude that specific bar from all averages and highest/lowest-volume calculations, so your readings reflect genuine, sustained trading activity. Toggle it off anytime if you want the listing day included. Bull Snort detection — flags high-conviction up days (3x+ average volume, closing near the highs) with an optional marker. Liquidity Table — a compact on-chart table showing Average ₹ Volume (in Cr/Lakhs/Millions), Projected Relative Volume (extrapolated from the session's elapsed time), and 1-minute Liquidity — useful for quickly judging whether a stock can absorb your intended position size without excessive slippage. Fully customizable — every color, label size, lookback period, and table position can be adjusted from the settings panel, along with an option to paint these signals directly onto price bars. How to use it: Use the HVE/HVY/HVQ tags to identify potential institutional accumulation zones — multiple high-volume tags clustering near a breakout or basing area are historically significant. Use the Y/Q dry-volume tags to spot low-liquidity consolidation phases that often precede expansion moves. The liquidity table helps size positions appropriately for the stock's actual tradability. Note: This is a volume/liquidity reference tool, not a standalone buy/sell signal generator. Combine it with your own price action framework and risk management

Indicator

Liquidity Indicator Liquidity Indicator Liquidity Indicator is a simple yet powerful liquidity measurement tool designed specifically for Indian equity markets. It calculates the average rupee-denominated trading volume (₹ Volume) over a user-defined period using Simple Moving Average, and displays it directly on the price chart as a clean color-coded label. What it shows: The label displays the average liquidity of a stock in Crores (Cr), giving traders a quick snapshot of how much money is flowing into the stock on average. Color Coding: - 🔴 Red — Below 40 Cr (low liquidity, avoid or trade with caution) - 🟡 Yellow — 40 to 100 Cr (moderate liquidity) - 🟢 Green — Above 100 Cr (high liquidity, safe for larger positions) Smart Averaging: Works seamlessly on recently listed stocks too. If a stock has fewer candles than the set period, the indicator automatically adjusts and takes average of available candles only. How to use: - Use it to filter stocks before taking swing or positional trades - Avoid entering low liquidity stocks (Red) to reduce slippage and impact cost - Best used on Daily timeframe for accurate liquidity assessment Settings: - Average Period — default 20 days (customizable) - Text Color — default white - Label Size — tiny / small / normal / large / huge

Indicator

Delta Volume Profile,Order Flow, Buy/Sell&Absorption POC LunqFX A normal volume profile shows you HOW MUCH volume traded at each price. Delta Volume Profile shows you WHO did it — buyers or sellers — at every price level. Each row of the profile is split into buying volume and selling volume, turning a plain histogram into a clean order-flow map that reveals where demand and supply were really built, and the one level where a large player was quietly absorbing the flow. ❶ WHAT YOU SEE ▸ THE DELTA PROFILE — a horizontal volume profile on the right of price, but every price level is split in two: blue = buying volume, orange = selling volume. The total length of a row is the volume traded there; the blue/orange split is the delta — the balance of buyers versus sellers at that exact price. One glance tells you whether a level was accumulation, distribution, or a fair two-sided fight. ▸ ABSORPTION POC — this is the level that matters most, and it is not the ordinary Point of Control. A classic POC is simply the highest-volume row. The Absorption POC is the row where heavy volume traded with a balanced delta — lots of buying AND selling at the same price. That is the signature of absorption: a large participant filling orders against the crowd without letting price move. It is marked with a gold line and label, because it is where reversals and strong reactions most often begin. ▸ DASHBOARD — a compact readout of the whole range: NET DELTA (are buyers or sellers in control overall), the Buy/Sell split as a percentage, and the exact Absorption price. ❷ WHY DELTA AND ABSORPTION MATTER Price only tells you where the market went. Order flow tells you the effort behind the move. A rally on weak buying delta is fragile; a level held by heavy two-sided absorption is where smart money is defending a position. By splitting volume into buy and sell at every price — and by isolating the absorption level — this profile shows the intent behind the volume, not just its size. That is the difference between a plain volume profile and an order-flow read. ❸ HOW TO USE IT 1 — Read the NET DELTA in the dashboard. Positive = buyers dominated the range (look for longs on pullbacks); negative = sellers dominated (favour shorts on rallies). 2 — Trade toward and away from the ABSORPTION level. It acts as a magnet and a strong support/resistance zone — price often returns to it, and reactions from it are among the cleanest on the chart. Use it as a target or as your line in the sand. 3 — Read each level's split before you trust it. A level that is mostly blue (buying) is genuine demand; a level built on orange (selling) is supply. When price approaches a level, its colour tells you which side is likely to defend it. 4 — Watch for imbalance vs balance. Strongly one-sided rows (almost all blue or all orange) mark aggressive, directional levels. Balanced rows — especially the Absorption POC — mark battle zones where the trend is most likely to stall or turn. ❹ HOW IT WORKS (transparent) For every bar, volume is split into buy-volume and sell-volume from where price closed inside the bar's range: buy-volume = volume × (close − low) ÷ range, sell-volume = volume × (high − close) ÷ range. This is a transparent, range-based delta estimate — it needs no tick or bid/ask feed, so it runs on any symbol. Each bar's buy and sell volume is added to the price row it traded in, across a fixed rolling lookback. The Absorption POC is the row that maximises (row volume ÷ largest row volume) × (1 − |buy − sell| ÷ row volume) — heavy volume weighted by how balanced its delta is. On symbols that report no exchange volume, the profile falls back to equal weight per bar (a price-density profile) so it still works everywhere, and the panel says PRICE PROFILE instead of DELTA PROFILE. Best used on markets with real volume — crypto (e.g. BINANCE:BTCUSDT), stocks, futures and indices — on any timeframe. On forex the volume is broker tick-volume, so treat the delta as an approximation of order flow. SETTINGS — lookback, number of rows (resolution), profile width, row gap, absorption line on/off, neutral candles on/off, and dashboard position. NON-REPAINTING — the profile is built only from closed historical bars over a fixed lookback and drawn on the last bar. It uses no request.security and no lookahead, so history never changes; only the current forming bar updates live, as with any volume profile. This indicator is an educational market-analysis tool, not financial advice. The volume delta shown is a transparent estimate from price and volume, not exchange-audited bid/ask order flow, and past behaviour does not guarantee future results. Always confirm with your own analysis and manage your risk.

Indicator

Supertrend + Apex HUD Master Pro - Farthaze ### Overview **Supertrend + Apex HUD Master Pro** is an all-in-one trading dashboard designed to combine clean price action trailing stops with a high-density, real-time Heads-Up Display (HUD). Instead of cluttering your chart with dozens of individual indicators, this script consolidates market trend, momentum, intraday volume dynamics, key daily pivot levels, and target projections into a single, compact interface. --- ### Key Features #### 1. Adaptive Supertrend Engine * **Trailing Stop Overlay:** Uses Average True Range (ATR) to trail stops dynamically based on volatility. * **Visual Trend Fill:** Highlights the active trend direction with transparent, non-intrusive color shading between price and the Supertrend line. * **Signal Labels:** Displays clean `BUY` and `SELL` tags on valid trend flip transitions. #### 2. Apex HUD Master Table A real-time data table pinned to your chart providing quick market analysis: * **Trend Bias & Momentum:** Instant visual status of trend direction alongside 14-period RSI momentum. * **Volume Analysis (RVOL):** Tracks current bar volume relative to a 20-period SMA to spot unusual volume spikes instantly. * **Shares Traded & Split Volume:** Calculates total session volume alongside intra-bar estimated **Buy Volume (Green)** and **Sell Volume (Red)** to gauge institutional buying vs. selling pressure. * **Key Levels (PDH/PDL & TDH/TDL):** Consolidated tracking of Previous Day High/Low and Today's High/Low for quick support/resistance reference. * **Dynamic Take-Profit Targets (TP1 / TP2 / TP3):** Calculates volatility-adjusted target levels using ATR multipliers to help plan trade exits. * **Risk-to-Reward Ratio:** Displays a real-time Risk:Reward ratio based on the distance between current price, the Supertrend stop-loss, and target levels. #### 3. Volatility Spike Monitor * A standalone auxiliary table tracking recent high-volatility expansion bars (bars exceeding your defined ATR spike threshold). * Keeps track of the last bullish and bearish volatility spikes along with their percentage move size and breakout prices. --- ### How to Use 1. **Identify Trend Bias:** Check the Supertrend overlay and the HUD's **Trend Bias** indicator to align with the primary direction. 2. **Confirm Volume & Momentum:** Ensure RSI momentum aligns with your bias and check if RVOL indicates elevated volume participation. 3. **Gauge Institutional Pressure:** Compare the green **Buy Vol** and red **Sell Vol** numbers in the HUD to confirm who is controlling the intraday order flow. 4. **Manage Trade Exits:** Use the auto-calculated **TP1, TP2, and TP3** target levels alongside the Risk:Reward readout to plan your entries and exits. --- ### Indicator Settings & Customization * **Supertrend Settings:** Adjust ATR Period and Multiplier to fit scalping, swing trading, or position trading timeframes. * **Apex HUD Options:** Customize table position (Top Right, Top Left, Bottom Right, Bottom Left) and text scaling size. * **Session Filter:** Filter shares traded calculation between *All Sessions*, *Regular Hours Only*, *Premarket Only*, or *Postmarket Only*. * **Volatility Spike Table:** Set custom ATR thresholds to trigger volume/range expansion tracking. --- *Disclaimer: This indicator is designed for educational and analytical purposes only and does not constitute financial advice. Always practice proper risk management.* I created this to surpass time to see today highest and lows and volume etc. Hope you like it. Happy trading

Indicator

by farthaze2006

Weis Wave with Main Pane Renko Volume Labels Weis Wave with Renko Peak/Trough Volume Labels This script is an amended/forked version of the original “Weis Wave Volume” indicator published by modhelius. Full credit is given to modhelius for the original Weis Wave Volume calculation, Renko assignment methodology and histogram implementation. The original calculation has been retained, converted to Pine Script v6 and extended with automatic price-chart labels and connector lines. OVERVIEW The indicator accumulates volume, or True Range where selected, into directional Weis Waves. The completed wave values are displayed as columns in the lower indicator pane. This amended version additionally places each completed Weis Wave value on the main Renko price chart at the corresponding wave peak or trough. Up-wave values are displayed using green labels and down-wave values using red labels by default. PEAK AND TROUGH LABELS When a directional wave is completed: • The script identifies the Renko box containing the actual peak or trough of that wave. • The completed Weis Wave volume value is placed above or below that box, according to the user settings. • A vertical connector line links the centre of the relevant Renko box to its value label. • The label is positioned retrospectively at the completed wave extreme once the subsequent change of direction confirms the wave. The labels therefore identify the completed wave rather than the first brick of the new opposing wave. CURRENT UNCOMPLETED WAVE An optional provisional label displays the accumulated value of the current uncompleted wave. The provisional label: • Moves when the current wave makes a new peak or trough. • Updates as additional volume is accumulated. • Uses a translucent label and dashed connector line to distinguish it from confirmed wave values. • Remains subject to change until an opposing wave confirms completion. The provisional label can be disabled independently. USER SETTINGS The script provides controls for: • Renko assignment method: ATR, Traditional or Part of Price. • Renko assignment value. • Price source. • Use of volume or True Range. • Oscillating histogram display. • Normalised wave values. • Completed-wave labels on or off. • Current uncompleted-wave label on or off. • Peak-label placement above or below the peak. • Trough-label placement above or below the trough. • Independent peak and trough vertical distances. • Distance measured in Renko boxes, minimum ticks or price units. • Label font size. • Connector lines on or off. • Connector-line thickness. • Volume-value divisor. • Number of decimal places. • Maximum number of historical labels retained. TIMEFRAME The indicator calculates using the current chart timeframe. It does not use a separate indicator timeframe because the Weis Wave calculation, Renko structure and price-chart labels must remain aligned. RENKO CHART NOTE Renko charts are synthetic charts constructed from price movement rather than fixed time intervals. Wave boundaries and accumulated volume values may therefore change when the chart timeframe, Renko method or Renko box size is changed. For consistent comparisons, use the same Renko configuration and indicator settings. This indicator is intended as an analytical visualisation tool. It does not generate trading entries, exits or investment recommendations. CREDIT Original Weis Wave Volume script and core calculation: modhelius Pine Script v6 conversion and extensions: Automatic Renko peak/trough labels, adjustable positioning, connector lines and provisional current-wave display.

Indicator

Session VWAP + Bands | Falcon AI Session VWAP with ±1 / ±2 / ±3 standard-deviation bands — the volume-weighted average price the market is actually trading around, anchored fresh each session. WHAT IT DOES • Plots VWAP anchored to the Daily session (default), Weekly, or a custom session you define (e.g. 0930–1600 New York). • Adds ±1σ, ±2σ and ±3σ bands so you can see when price is statistically stretched from the average. • Shades the ±1σ "value area" — where most of the session's volume changes hands. • Marks (and can alert) when price crosses back above or below VWAP. WHY VWAP VWAP is the benchmark institutions measure their fills against. Price holding above it = buyers in control; below = sellers. The outer bands (±2σ / ±3σ) flag over-extension, where price often mean-reverts back toward VWAP. HOW TO USE • Bias: above VWAP lean long, below lean short. • Mean reversion: watch fades from the ±2σ / ±3σ bands back toward VWAP. • Intraday S/R: VWAP and the ±1σ edges often act as support/resistance. SETTINGS • Anchor: Daily / Weekly / Custom session (+ timezone) • Source (default HLC3) • Toggle each band + the value-area shading • Colors and optional VWAP-cross alerts Works on any symbol/timeframe that has volume (futures, stocks, crypto). Best on intraday charts. Educational tool only — not financial advice. Test everything yourself before trading it.

Indicator

Futures Volume + Delta - CFD Charts A volume pane for CFD and cash-index charts that shows the REAL traded volume of the matching futures contract — plus an estimated buy/sell delta and absorption flags for effort-without-result bars. What makes it original: CFD "volume" is broker tick count, not market participation. This pane never uses it — every column is the exchange volume of the auto-detected futures contract. The delta column is built from the futures contract's own lower-timeframe candles (up-candle volume counts as buying, down-candle volume as selling): the volume is real, only the side attribution is an estimate, and it is labeled as such. Absorption flags then combine both axes — volume percentile high while the price range percentile is low — the candle-data footprint that hidden passive interest (iceberg-style execution) leaves behind. Pine has no order book, so this is explicitly a footprint proxy, not order-book detection. How it works: - The futures contract is auto-detected from the chart symbol (DAX/GER40 -> FDAX, NAS100 -> NQ, US30 -> YM, UK100 -> Z, US500 -> ES), or set manually. - Histogram = futures volume per chart bar; columns tint with bar direction, a configurable MA marks the average. - Delta = buy-minus-sell futures volume from 1/5/15-minute intrabars (auto-selected by chart timeframe, manual override). Lower-timeframe history is limited, so the delta reaches less far back than the histogram. - Absorption flag (orange diamond + alert): volume percentile >= X and range percentile <= Y over a rolling lookback — both thresholds adjustable. - A status label confirms the active source and the delta resolution. How to use it: read it like a footprint-lite. Rising price on rising futures volume = participation confirms the move. An absorption diamond after an extended run — heavy contracts traded, no price progress — marks where passive interest is absorbing the aggression; combined with a one-sided delta it is a common exhaustion/iceberg footprint. Delayed futures feeds confirm bars a few minutes late; the historical picture is complete. *This script is part of a consistent set of open-source session, range and volume tools — the companions are on my profile.*

Indicator

by KruegerAlgorithms

Anchored VWAP Engine [Quantum Algo]Anchored VWAP Engine ==================================================== 🔶 OVERVIEW Anchored VWAP Engine is a multi-stream anchored Volume Weighted Average Price indicator that removes the hardest part of trading with anchored VWAP: choosing the anchor. The engine runs up to seven independently anchored VWAP streams that place and reset their own anchors automatically — the week open (the default stream), session open, month open, confirmed swing highs and swing lows, the highest-volume bar in a lookback, and a liquidity-sweep anchor that re-anchors from the exact bar where a stop run occurred. On top of the streams it adds volume-weighted deviation bands, automatic confluence cluster zones where multiple streams converge, band-rejection signals, and a stability metric that names which VWAP the market is currently respecting most. Out of the box the chart shows a single clean line: the week-anchored Volume Weighted Average Price with its deviation bands. Every additional stream is one checkbox away. 🔶 WHAT IS AN ANCHORED VWAP? The Volume Weighted Average Price is the average price of an instrument weighted by traded volume — the closest public approximation of the average position price of everyone who transacted since a chosen starting point. An anchored VWAP starts that calculation from a meaningful event rather than an arbitrary date: a weekly open, a swing low, a high-volume climax bar. Price above an anchored VWAP means the average participant since that event is in profit; price returning to it often behaves as a decision level, because it is where the average position breaks even. The power of the tool depends entirely on where it is anchored — which is exactly what this engine automates. 🔶 WHY THIS SCRIPT IS ORIGINAL 1. Automatic multi-anchor engine. Seven streams anchor and re-anchor themselves from objectively defined events — no manual anchor placement, no stale anchors, no guessing. 2. The liquidity-sweep anchor. When a swing level is wicked through and rejected — a stop run — the sweep stream re-anchors from that exact bar and colors itself by implication: the accumulation tone after a sell-side sweep, the distribution tone after a buy-side raid. Averaging from the stop-run bar tracks the entry basis of the participants who engineered it. To our knowledge this anchor type has not been published before. 3. Exact swing anchoring. Swing-anchored streams rebuild their sums retroactively from the true pivot bar once the pivot confirms, so the calculation is mathematically identical to a VWAP hand-anchored on the swing itself — not started late at the confirmation bar. 4. Confluence clusters. When two or more active streams converge within an Average True Range tolerance, the engine draws a cluster zone and labels its strength. Multiple independent volume-weighted averages agreeing on one price is the strongest form of VWAP confluence, detected automatically. 5. The In Control metric. An exponentially decayed crossing-rate measures how cleanly price is respecting each stream; the dashboard names the stream currently in control. Users learn which anchor matters today instead of watching all of them equally. 6. True volume-weighted deviation bands. The bands are built from the volume-weighted variance of the primary stream — not a simple price standard deviation — at two configurable widths, with band-rejection signals printed as a single σ character whose full context lives in the hover tooltip, protected by a signal cooldown. 7. Quiet by default. One stream, one set of bands, capped signals, and a compact dashboard. The engine detects everything; the chart shows only what is asked of it. 🔶 HOW IT WORKS Streams: Each stream maintains volume-weighted price and variance sums that reset on its anchor event — new week, new session, new month, a confirmed swing, a lookback volume record, or a qualified liquidity sweep. Between events the sums accumulate bar by bar, producing the stream's live anchored VWAP. Sweep detection: A sweep qualifies when price wicks through the last confirmed swing level but closes back inside it, with per-level memory so the same level cannot re-trigger. The sweep stream then re-anchors from that bar. Deviation bands: The primary stream (selectable; week open by default) carries inner and outer bands at configurable sigma multiples computed from its own volume-weighted variance, with softly tinted zones between them. Signals: A wick beyond the outer band with a close back inside, on the correct side of the VWAP, prints the σ rejection signal — reversion bias toward the average — evaluated on closed bars only and rate-limited by the cooldown. Clusters: On the live bar the engine groups all active stream values within the tolerance and draws a labeled zone for each group of two or more. Dashboard: A fully themeable panel lists every stream with its live distance from price in Average True Range units and side, plus the In Control stream, active cluster count, and the current band width. Non-repainting: Anchors use confirmed events, sweeps and signals are evaluated at bar close, and swing streams rebuild exactly rather than approximately. 🔶 HOW TO USE IT 1. Works on any market with reliable volume — cryptocurrency, stocks, indices, futures. On the default settings, read the week-anchored VWAP as the institutional benchmark: above it with rising distance means the average weekly participant is in profit. 2. Treat the VWAP itself as the decision level and the outer bands as stretch: σ rejections at the outer band carry a reversion bias back toward the average. 3. Enable the swing and sweep anchors to study reactions: price returning to a sweep-anchored VWAP is returning to the average entry of the stop-run — a level worth watching. 4. Cluster zones are the highest-value levels the engine produces: several independent volume-weighted averages agreeing on one price. Watch how price behaves on first touch. 5. Use the In Control row to pick which stream deserves your attention today, and the distance column to see what is nearby before it is hit. 6. Intraday traders can switch the primary stream to Session Open; swing traders can promote Month Open. 🔶 SETTINGS - Anchors: independent toggles for all seven streams, swing pivot length, highest-volume lookback. Default: Week Open only. - Primary stream selection with inner and outer band multiples. - Cluster detection with Average True Range tolerance. - Signals: toggle, cooldown, and signals to keep. - Individual colors for every stream plus accent and neutral colors. - Themeable dashboard: position, four text sizes, title band, background, frame, grid, and three text colors. 🔶 ALERTS - Bullish / Bearish Band Rejection — price rejected the outer deviation band of the primary stream. - Price Crossed Above / Below Primary VWAP. - VWAP Cluster Formed — two or more streams converged into a confluence zone. - Sweep Anchor Reset — a liquidity sweep occurred and the sweep stream re-anchored from the stop-run bar. 🔶 FREQUENTLY ASKED QUESTIONS Does the indicator repaint? No. Anchor events are confirmed before they act, swing streams rebuild exactly from the confirmed pivot bar, and signals are evaluated on closed bars. Swing confirmation carries its standard pivot lag by design. Why do I only see one line? By default only the week-anchored stream is enabled for a clean first chart. Every other anchor is a checkbox in settings. What makes the sweep anchor special? It averages price and volume from the exact bar where stops were run — the basis of the participants who engineered the move — rather than from a calendar date or swing alone. Why is there no cluster or In Control reading? Both features compare multiple streams; enable two or more anchors and they activate. Which markets should avoid it? Any Volume Weighted Average Price tool is only as good as the volume feed. On symbols with unreliable or synthetic volume reporting, treat every stream with caution. 🔶 CREDITS The Volume Weighted Average Price was introduced by Stephen Berkowitz, Dennis Logue and Eugene Noser (1988), and the anchored application was popularized by Brian Shannon, whose work established anchoring from meaningful events as a discipline. This script gratefully acknowledges both. The multi-stream auto-anchoring engine, the liquidity-sweep anchor, the exact retroactive swing rebuild, confluence clustering, the In Control stability metric, and all code in this script are original work — no third-party or open-source script code was reused. 🔶 LIMITATIONS Volume quality determines VWAP quality; symbols with unreliable volume produce unreliable averages. Deviation bands need bars to mature after each re-anchor. Cluster detection reports convergence, not a guarantee of reaction. The In Control metric measures recent respect, not future behavior. No indicator replaces independent analysis. 🔶 DISCLAIMER This script is provided strictly for educational and informational purposes. It is not financial advice, an investment recommendation, or a solicitation to buy or sell any financial instrument. Past behavior of any average, band, or cluster does not guarantee future results. Trading involves substantial risk. Always do your own research and manage risk independently.

Indicator

by Quantum-Algo

Futures Volume VWAP + Bands - CFD Charts A session/week/month-anchored VWAP with 1/2/3-sigma bands — with a twist for CFD traders: the VWAP weighting can use REAL futures exchange volume instead of broker tick volume. What makes it original: this is not another VWAP variant — the weighting source is the auto-detected futures contract while the price stays the CFD's, bars without futures data are excluded instead of silently falling back to tick volume, and the daily anchor can follow the futures trading day so the VWAP matches across CFD and native futures charts. How it works: - Price source is this chart's CFD price (hlc3 by default); the weight is the volume of the auto-detected futures contract (request.security). Because only the WEIGHT comes from the future, the basis offset between CFD and futures prices is handled naturally. - Bands are computed from the volume-weighted variance around the VWAP. - Optional "Daily anchor = futures trading day" resets the calculation at the futures day change instead of CFD broker midnight, so the VWAP matches across CFD and native futures charts. - Bars without futures data do not enter the sums; a status label always shows which volume source is active. How to use it: the standard VWAP playbook applies — price above a rising VWAP supports longs, reversion trades target the VWAP, and the 2/3-sigma bands mark statistically stretched zones where momentum entries have poor expectancy. The difference is that these levels are weighted by real market participation, so they match what futures traders see instead of broker tick noise. Check the status label once after loading to confirm the futures feed is active.

Indicator

by KruegerAlgorithms

VWAP Suite I EonMetrics VWAP Suite VWAP Suite plots three independently anchored Volume-Weighted Average Price lines — Session, Weekly and Monthly — with volume-weighted deviation bands and the previous period's VWAP close kept on the chart as a reference level. Everything is computed from first principles at each anchor, so every line resets exactly where its period starts. 🔶 WHAT VWAP IS VWAP is the average price of the period weighted by how much volume traded at each price. It answers one question: "what is the fair average price actually paid since the anchor?" That is why institutional execution desks benchmark fills against it, and why price so often reacts when it returns there — it is the level where the average participant in the period is at break-even. Above the VWAP the average buyer of the period is in profit; below it, under water. 🔶 WHAT IT DOES Three anchors — Session (resets each trading day), Weekly and Monthly VWAP, each with its own toggle and color. Intraday traders typically work with Session, swing traders add Weekly, and Monthly serves as the higher-timeframe fair-value reference. Anchors that make no sense on the current chart timeframe (e.g. a Session VWAP on a daily chart) hide themselves automatically. Deviation bands — ±1σ, ±2σ and optional ±3σ around ONE chosen anchor. The deviation is volume-weighted and anchored to the same period as the VWAP it wraps — not a rolling standard deviation — which is the statistically consistent way to band a VWAP (the same math PulseWire's built-in VWAP bands use). ±2σ is the classic stretched-price reference; the optional gradient fill keeps the zones readable without clutter. Previous VWAP Close — the exact level where the Session (or Weekly) VWAP finished its previous period, drawn flat through the current one. The same idea as previous day high/low, but volume-based: yesterday's fair price is a natural magnet and reaction level for today. Few VWAP tools carry this level forward — it is the reason this suite exists. 🔶 HOW IT IS CALCULATED From each anchor the script accumulates three sums bar by bar: volume × price, volume, and volume × price². VWAP = Σ(volume × price) / Σ(volume). The band deviation comes from the volume-weighted variance Σ(volume × price²)/Σ(volume) − VWAP². At every period rollover the previous VWAP value is captured first, then the sums reset to zero. Values only update on confirmed data — there is no repainting logic anywhere in the script. 🔶 ALERTS Seven alert conditions: price crossing each of the three VWAPs, price touching the +2σ or −2σ band, and price crossing the previous Session or previous Week VWAP close. 🔶 HOW TO USE 1. Pick your anchors — Session for intraday, add Weekly for swing context. 2. Choose which anchor carries the deviation bands (Bands Around). 3. Keep Previous Session VWAP on — reactions at yesterday's fair price are the cleanest thing this tool shows. 4. Set alerts on the crossings you actually trade around. 🔶 SETTINGS Source (price input, hlc3 default) · Anchors (Session / Weekly / Monthly, each with color) · Deviation Bands (anchor selector, ±1σ/±2σ/±3σ toggles, gradient fill) · Previous VWAP Close (Session / Weekly levels). 🔶 HONEST LIMITATIONS On CFDs and spot forex the data feed reports TICK volume (number of price updates), not true traded volume. VWAP built on tick volume is still the standard practice on those markets and tracks the real one closely on liquid symbols, but you should know what feeds the math. On symbols with no volume data at all the script deliberately shows nothing rather than fake a line. VWAP is a descriptive average, not a prediction — this tool draws levels, it does not generate signals. Part of the EonMetrics toolset.

Indicator

NIMBUS [ThrowMaster]NIMBUS — Ichimoku, Reimagined Classic Ichimoku is brilliant at one question: "Where is the market right now — above, below, or inside equilibrium?" It is far weaker at a second question every trader actually asks: "What is the market about to do?" NIMBUS keeps the timeless Ichimoku framework intact and adds three dimensions built to close that gap — while staying, above all, honest about what it is: a context compass, not a signal service. ━━━━━━━━━━━━━━━━━━━━━━━━ WHAT NIMBUS ADDS ━━━━━━━━━━━━━━━━━━━━━━━━ ⭐ Kumo Calendar — Twist Countdown Here is a fact most traders overlook: the cloud in front of price is already fully drawn. It is built entirely from bars that have ALREADY closed, then shifted forward. That means the next Kumo twist — the moment Senkou Span A and B swap places — is knowable in advance. NIMBUS scans the forward cloud and counts the exact number of bars until that twist reaches price, and warns you when a thin (weak-support) section is approaching. Ichimoku's most-criticised trait, its lag, becomes a schedule you can read ahead of time. 🩵 Breath — Volume-Reactive Cloud A traditional cloud shows only price geometry; two identical-looking clouds can hide wildly different conviction. NIMBUS makes the cloud breathe: it grows more solid on high-participation bars and fainter on quiet ones, using a rolling volume percentile. Strength becomes something you feel at a glance, not something you have to calculate. (If a symbol reports no volume, the cloud simply falls back to a fixed opacity — no errors, no false readings.) 🎯 Tenkan / Kijun Cross Clarity The Tenkan–Kijun cross is one of Ichimoku's core events, yet on most charts it hides in a tangle of lines. NIMBUS marks it precisely: a teal circle at the exact price and bar of a bullish cross, coral for bearish. No hunting, no guessing. ◈ Alignment Hints When four independent Ichimoku dimensions agree — price vs cloud, Tenkan vs Kijun, cloud colour, and the lagging read — AND price reclaims or loses the cloud on a confirmed bar, NIMBUS prints a small diamond. Think of it as a puzzle-game hint: a nudge to look at the right place at the right time. It is deliberately NOT a buy or sell command, and it never gives a target. ━━━━━━━━━━━━━━━━━━━━━━━━ HOW IT WORKS ━━━━━━━━━━━━━━━━━━━━━━━━ NIMBUS uses the standard Ichimoku engine — Tenkan (9), Kijun (26), Senkou Span A/B, and the lagging span, all fully adjustable. "Price vs cloud" always compares price to the cloud value formed 25 bars ago — the cloud actually sitting beneath price — so the reading reflects real, settled structure. The Breath layer reads a 100-bar volume percentile. The Twist Countdown walks the already-shifted forward cloud bar by bar. The dashboard summarises everything in one compact, theme-aware panel with a mobile Compact Mode. ━━━━━━━━━━━━━━━━━━━━━━━━ HOW TO USE ━━━━━━━━━━━━━━━━━━━━━━━━ • Read the cloud for trend context: above = bullish structure, below = bearish, inside = balance/chop. • Watch the Twist Countdown to anticipate when the cloud's support/resistance character is about to flip — useful for planning, not for firing blind. • Let Breath tell you whether a move carries participation or is running on fumes. • Treat Hints as a reason to zoom in and do your own analysis, never as an instruction. • Combine with your own risk management. NIMBUS describes context; your plan decides the trade. ━━━━━━━━━━━━━━━━━━━━━━━━ ON REPAINTING (honest) ━━━━━━━━━━━━━━━━━━━━━━━━ Once a bar closes, every Tenkan/Kijun/Span value is fixed and never redrawn. Hints and cross circles are all confirmed on bar close, so a printed mark cannot later disappear. The forward cloud is built only from closed bars, so it is fixed the moment it appears. Like all Ichimoku tools, values on the CURRENT, still-forming bar update in real time until that bar closes — this is inherent to the framework, not hidden repainting, and it is documented directly in the code comments. ━━━━━━━━━━━━━━━━━━━━━━━━ WHAT MAKES IT ORIGINAL ━━━━━━━━━━━━━━━━━━━━━━━━ NIMBUS is not another line pack bolted onto Ichimoku. The Kumo Calendar reframes the forward cloud as a countdown rather than a static shape; Breath encodes participation into the cloud's opacity; and the whole tool is presented as an explicit, self-aware CONTEXT instrument — it tells you what the market is, and refuses to pretend it knows your trade. The code is fully open for you to read, study, and learn from. ━━━━━━━━━━━━━━━━━━━━━━━━ NOTE ━━━━━━━━━━━━━━━━━━━━━━━━ No indicator predicts the future or guarantees results, and NIMBUS makes no such claim. It is a decision-support and context tool. Markets involve risk; always use independent judgement and sound risk management. Not financial advice.

Indicator

In-depth global business and economic analysis Comprehensive trading education and market insights