GEEN Smart Signal What it does
GEEN Smart Signal is not a single-indicator tool. It combines several classic analysis engines into one weighted Decision Engine that scores every trade candidate from 0 to 100, then only prints signals that pass a minimum confidence threshold. Every signal comes with a full breakdown showing exactly why it was accepted.
How it works
A signal candidate is generated by an ATR trailing-stop flip (with optional Heikin Ashi smoothing of the calculation source). The candidate is then evaluated by 8 engines, each contributing a weighted score:
Market Structure (20 pts) — pivot-based HH/HL/LH/LL classification, BOS and CHoCH detection
Trend (20 pts) — EMA 50/100/200 stack, classified into 5 states from strong bullish to strong bearish
Momentum (15 pts) — RSI position + ADX strength, used as confirmation only
Volume (15 pts) — current volume vs. 20-bar average, rewarding volume spikes
Liquidity (10 pts) — liquidity sweeps of prior swings, price inside a Demand/Supply zone or FVG, and Premium/Discount location vs. equilibrium
Volatility (10 pts) — ATR vs. its average, filtering out dead markets
Multi-Timeframe (10 pts) — 1H/4H/D trend alignment (closed-bar data only)
Risk (10 pts) — estimated reward-to-risk toward the nearest opposing swing
The total is normalized to 100. Below the minimum threshold (default 60) the signal is rejected (WAIT). 60–75 prints as weak, 75–85 as good, above 85 as strong. Clicking any signal arrow shows the per-engine score breakdown, entry, ATR stop, and 1R/2R/3R targets.
Chart elements
Structure labels (HH/HL/LH/LL, BOS, CHoCH), auto Order Blocks with mitigation removal, Fair Value Gaps, Equal Highs/Lows (EQH/EQL), session Kill Zones (Asia/London/New York, with an optional session filter), a main panel (decision, confidence, trend, momentum, risk, entry/SL/TP, RR, 5-timeframe view, active session, SMT check vs. a correlated symbol), and a monthly statistics panel that tracks how many signals reached TP1/TP2/TP3 or hit the stop — so you can measure performance yourself on any symbol and timeframe.
Anti-repaint design
Signals are confirmed on bar close only, higher-timeframe data uses closed bars with lookahead off, and structure breaks are evaluated on confirmed closes.
How to use
Works on any symbol and timeframe. Start with defaults, or raise the minimum confidence and enable the London/New York session filter for intraday trading. Alerts are included for buy/sell and for strong (85+) signals. This tool is for educational purposes and is not financial advice; no indicator guarantees results — always use proper risk management. Indicator
EVA Ai+ Radar v25.2 Screener - Crypto & Stock LONG SHORT Si🧬 EVA Ai+ Radar — профессиональный рыночный скринер и индикатор для PulseWire, созданный для быстрого поиска перспективных торговых инструментов среди российских акций и популярных криптовалют.
Система одновременно анализирует до 20 активов, рассчитывает приоритет каждого инструмента и автоматически сортирует рынок по силе текущего движения. Вместо ручного переключения между графиками трейдер получает компактную премиальную панель с готовым рейтингом активов.
🔎 Что анализирует EVA Ai+ Radar
Для каждого инструмента рассчитываются:
направление краткосрочного и среднесрочного тренда;
положение цены относительно EMA;
сила тренда через ADX и DMI;
состояние RSI;
относительный торговый объём;
направленный рыночный поток Flow;
изменение цены;
итоговая сила и приоритет сигнала.
📊 Сигналы скринера
🟢 LONG — подтверждённое преимущество покупателей и восходящее направление.
🔴 SHORT — подтверждённое преимущество продавцов и нисходящее направление.
🟡 РАНО ↑ / РАНО ↓ — раннее формирование движения до достижения строгого порога основного сигнала.
⚪ НАБЛ. — инструмент пока не имеет достаточного преимущества для подтверждённого входа.
⚡ Два режима работы
RADAR — строгий режим для поиска подтверждённых сигналов LONG и SHORT.
РАНО — расширенный режим, дополнительно показывающий инструменты, в которых движение только начинает формироваться.
🛡️ Защита от перерисовки
По умолчанию скринер использует данные только закрытых свечей выбранного таймфрейма:
без lookahead_on;
без смещения сигналов в прошлое;
без перерисовки подтверждённых значений;
с безопасной обработкой недоступных торговых инструментов
🌍 Поддерживаемые рынки
🇷🇺 Российские акции Московской биржи:
Сбербанк;
Газпром;
Лукойл;
Роснефть;
Новатэк;
Норникель;
Полюс;
Татнефть;
ВТБ;
Яндекс.
₿ Криптовалюты:
Bitcoin;
Ethereum;
Solana;
BNB;
XRP;
Dogecoin;
Cardano;
Avalanche;
Chainlink;
Toncoin.
Все тикеры можно изменить в настройках индикатора.
⚙️ Основные возможности
✅ Скринер акций и криптовалют
✅ Одновременный анализ 20 инструментов
✅ Торговые сигналы LONG и SHORT
✅ Раннее обнаружение движения
✅ Автоматический рейтинг активов
✅ Анализ тренда, объёма, RSI, ADX и DMI
✅ Относительный объём и Flow
✅ Индикатор без перерисовки
✅ Настраиваемый таймфрейм
✅ Алерты PulseWire
✅ Премиальный интерфейс EVA
✅ Безопасная обработка недоступных тикеров
⚠️ Важная информация
EVA Ai+ Radar является аналитическим инструментом и не представляет собой инвестиционную рекомендацию. Сигналы индикатора необходимо оценивать совместно с рыночным контекстом, управлением капиталом и контролем риска.
🧬 EVA Ai+ Radar is a professional PulseWire market scanner designed to help traders quickly identify strong opportunities across major cryptocurrencies and Russian stocks.
The screener analyzes up to 20 markets simultaneously, calculates a priority score for every symbol, and automatically ranks instruments according to current trend strength and market momentum. Instead of manually switching between multiple charts, traders receive a compact premium dashboard with a structured market overview.
🔎 What EVA Ai+ Radar analyzes
For every selected symbol, the system evaluates:
short-term and medium-term trend direction;
price position relative to exponential moving averages;
trend strength using ADX and DMI;
RSI momentum;
relative trading volume;
directional market Flow;
price change;
final signal strength and priority score.
📊 Screener signals
🟢 LONG — confirmed bullish advantage and positive market direction.
🔴 SHORT — confirmed bearish advantage and negative market direction.
🟡 EARLY ↑ / EARLY ↓ — an emerging directional setup detected before the strict signal threshold is reached.
⚪ WATCH — the asset does not currently have enough directional advantage for a confirmed signal.
⚡ Two scanning modes
RADAR — strict mode designed to identify confirmed LONG and SHORT signals.
EARLY — expanded mode that also identifies assets where a new directional move may be starting.
🛡️ Non-repainting calculation
By default, the screener uses confirmed data from closed candles on the selected timeframe:
no lookahead_on;
no historical signal backfilling;
no repainting of confirmed values;
safe processing of unavailable or unsupported symbols.
If one selected ticker is temporarily unavailable, the remaining markets continue to be calculated normally.
💎 Premium EVA dashboard
The dashboard displays:
market ranking;
symbol;
LONG, SHORT, or EARLY signal;
signal strength;
percentage price change;
RSI and relative volume;
directional Flow;
number of active LONG, SHORT, and EARLY signals;
selected timeframe and calculation mode.
The visible list can be adjusted from 5 to 20 rows, while all enabled markets continue to be analyzed.
🔔 PulseWire alerts
The screener includes three alert conditions:
confirmed LONG signal detected;
confirmed SHORT signal detected;
EARLY directional setup detected.
Alerts can be configured using the standard PulseWire alert system.
🌍 Supported markets
🇷🇺 Russian stocks:
Sberbank;
Gazprom;
Lukoil;
Rosneft;
Novatek;
Norilsk Nickel;
Polyus;
Tatneft;
VTB;
Yandex.
₿ Cryptocurrencies:
Bitcoin;
Ethereum;
Solana;
BNB;
XRP;
Dogecoin;
Cardano;
Avalanche;
Chainlink;
Toncoin.
Every symbol can be changed through the indicator settings.
⚙️ Main features
✅ PulseWire stock and crypto screener
✅ Simultaneous analysis of 20 symbols
✅ LONG and SHORT trading signals
✅ Early trend detection
✅ Automatic market ranking
✅ Trend, volume, RSI, ADX, and DMI analysis
✅ Relative volume and directional Flow
✅ Non-repainting indicator
✅ Custom scanning timeframe
✅ PulseWire alerts
✅ Premium EVA interface
✅ Safe invalid-symbol handling
⚠️ Disclaimer
EVA Ai+ Radar is an analytical and educational tool. It does not provide financial or investment advice. Every signal should be evaluated together with market context, position sizing, risk management, and independent analysis. Indicator
Market Compass - Dynamic Range FrameworkHello English readers, the English version is provided below. Please scroll down to view it.
Market Compass - Dynamic Range Framework
市场指南针 · 动态区间框架
版本：1.0 | 类型：非预测性价格结构定位工具 | 作者：
绝大多数交易亏损，根源并非方向判断错误，而是 “位置感”的缺失 。本指标旨在为您解决这一核心痛点——它不告诉您涨跌，但它告诉您 “此时此刻，价格在地图上的精确坐标” 。
---
本指标并非传统的均线或动量振荡器，而是一个 基于固定回溯周期的价格百分位区间定位系统 。它以最近 N 根 K 线（默认 252 根，对应约 1 个交易年度）的最高价与最低价为天然边界，构建出一个覆盖 0% 至 100% 的 动态箱体网格 。
该网格并非平均分割，而是采用 非对称的黄金分割与极值锚定法 ，精确定制了 9 条关键水平轨道。这些轨道以彩色矩形色带和右侧实时浮动标签的形式，干净利落地叠加于主图 K 线之上：
100% 顶部极值轨 （红色）：回溯周期内的绝对天花板。
89% 超买警戒轨 （橙色）：情绪极度亢奋区，多头衰竭高发带。
75% 强势分界轨 （黄色）：牛熊分水岭，站上此线意味中期趋势转强。
62.5% 强界枢轴轨 （紫色）：多头趋势中的次级回踩支撑位。
50% 多空中轴轨 （白色）：价值均衡线，长线资金的成本密集区。
37.5% 弱界枢轴轨 （青色）：空头趋势中的次级反弹阻力位。
25% 弱势分界轨 （亮蓝）：跌破此线意味中期趋势正式转入空头。
11% 超卖警戒轨 （浅绿）：情绪极度恐慌区，空头衰竭高发带。
0% 底部极值轨 （深蓝）：回溯周期内的绝对地板。
随着新 K 线的生成，整个框架会 滚动迭代 ，始终锚定最新的价格活动范围，确保参考坐标永不失效。
---
传统价格图表存在严重的 视角局限性 ，导致交易者频繁陷入误判：
“绝对值幻觉”与锚定效应 ：股价 100 元是高是低？脱离近期波动区间谈绝对价格毫无意义。本指标将价格转化为 0~100 的相对百分位数 ，消除了价格基数的干扰，让您客观评判当前价格是“相对高位”还是“相对低位”。
“区间失忆症”与近因偏好 ：人类大脑天然对最近 5~10 根 K 线赋予过高权重，极易遗忘前期关键的支撑与阻力结构。本指标通过固定窗口的滚动计算，强制将 过去 N 根 K 线的价格极值 醒目地绘制在当前图表上，纠正了这种认知偏差。
均值回归与极端磁吸理论 ：金融市场价格长期遵循 “极端值向中轴（50% 均衡线）回归” 的统计规律。当价格进入 89% 以上或 11% 以下的极端尾部区域时，统计概率上必然面临向 50% 中轴的牵引力。本框架为这种“牵引力”提供了精确的量化刻度。
---
本指标是 趋势过滤、盈亏比评估与动态止盈止损 的绝佳辅助工具。请勿将其视为独立入场信号，而应作为 “价格行为决策的量化底座” 。
3.1 基于市场环境的三种经典战法
【趋势跟踪战法】—— 适用于强势单边行情
当价格经过充分调整后，以放量大阳线有效突破 75% 强势分界轨 时，视为中期趋势由震荡转强的关键确认点。若后续价格回踩 75% 轨并获得支撑（收出长下影线），则为绝佳的 顺大势、逆小势 加仓机会。此时可将止损设于 62.5% 强界枢轴轨下方。
【均值回归战法】—— 适用于宽幅震荡行情
当价格快速冲高至 89% 超买轨 上方，且 K 线出现明显滞涨形态（如射击之星、看跌吞没）时，可视为短线高空机会，第一目标位看向 75% 轨，第二目标位看向 50% 中轴。反之，价格急跌至 11% 超卖轨 下方并出现止跌反转形态时，可视为短线低吸机会。
【突破回踩确认战法】—— 适用于关键阻力支撑转换
任何一条百分比轨道都具备动态支撑/阻力的属性。当价格自下而上突破某一轨道（如 62.5% 轨）后，若随后缩量回踩该轨道且未跌破，则说明该轨道已由阻力转换为支撑，此处是风险收益比极高的 “0 级入场点” （止损极小，空间极大）。
3.2 动态止盈与止损设置指南
波段多头持仓 ：可将 37.5% 弱界枢轴轨 设为最终的硬性离场线。只要价格在此轨之上，多头头寸便可安心持有，避免被早期震荡洗出。
短线空头持仓 ：可将 62.5% 强界枢轴轨 设为硬性止损线。一旦价格强势反抽并站上此轨，则空头逻辑被证伪，需果断离场。
3.3 参数动态调整建议（针对不同交易周期）
日线级别（中长线 / 波段） ：建议保持默认 252 （约 1 年交易日），用于捕捉年度大箱体的牛熊转换。
周线级别（大趋势 / 仓位布局） ：建议调整为 52 （约 1 年周线），用于识别超大周期的价格百分位极值。
小时 / 分钟级别（日内短线 / 剥头皮） ：建议调整为 50 ~ 100 ，过长的周期在分钟图上会导致框架钝化，失去短线参考意义。
---
4.1 最佳适用场景
流动性充裕的权益市场 ：沪深 300、中证 500、标普 500 等主流指数及成分股。
高流动性大宗商品与外汇 ：黄金、原油、欧元/美元等主要交易对。
高市值加密货币 ：比特币（BTC）、以太坊（ETH）等。
4.2 禁用与慎用场景（风控红线）
严禁用于上市不足 N 根 K 线的新股/次新股 ：尽管代码内置了自适应缩窄逻辑，但新股价格极不稳定，高低点极易被操纵，百分位框架参考价值极低。
慎用于连续无量涨跌停的极端行情 ：在极强的单边轧空或流动性枯竭的踩踏中，价格可能长期粘合在 100% 轨之上或 0% 轨之下，此时指标出现 “钝化” 现象，需立即切换至趋势跟踪指标（如 SAR 抛物线或均线系统）进行二次印证。
慎用于高度控盘的“庄股”或低成交量仙股 ：稀疏的成交导致价格跳跃性极大，计算出的区间极易失真。
---
本指标严格遵循 PulseWire 最佳实践， 完全不包含未来函数 ，所有信号均基于确定性的历史数据实时滚动计算。
5.1 自适应周期核心算法
系统优先读取用户设定的 `lookbackLength`（默认 252）。然而，当图表加载的品种上市天数不足时，引擎会自动触发保护机制：
effectiveLookback = math.min(i_lookbackLength, bar_index + 1)
该行代码确保指标在上市首日即能工作，且随着新 K 线增加，窗口期自然增长，直至达到用户设定的标准周期。
5.2 九宫格线性映射（百分位分割数学）
首先确定箱体极值与范围：
periodLow = ta.lowest(low, effectiveLookback) // 底部 0%
periodHigh = ta.highest(high, effectiveLookback) // 顶部 100%
priceRange = periodHigh - periodLow
随后基于 斐波那契数列与统计学标准差启发式阈值 进行非均匀切割：
priceL89 = periodLow + priceRange * 0.89 // 极值警戒
priceL75 = periodLow + priceRange * 0.75 // 强市分界
priceL625 = periodLow + priceRange * 0.625 // 黄金分割枢轴
priceL50 = periodLow + priceRange * 0.50 // 均衡中轴
// ... 下方对称切割同理
注：62.5% 与 37.5% 的选取来源于对 0.618 黄金分割率的整数微调，旨在提供比传统 61.8% 更为清晰且易于记忆的刻度。
5.3 图形渲染引擎优化（内存与性能管理）
为了避免在大量历史 K 线上重复绘制矩形和线条导致图表卡顿，引擎采用 “惰性删除与单次实例化” 策略：
if barstate.islast
// 仅当加载完成且运行至图表最右侧时触发绘制
box.delete(boxMain) // 先销毁旧句柄
line.delete(lineL100) // 清理旧线
// ... 重新创建新对象
所有标签采用 label.style_label_left 右对齐样式，确保在图表最右侧整齐排列，绝不遮挡最新的 K 线实体，同时提供精确至交易所最小报价单位（`format.mintick`）的实时读数。
---
它不是占卜未来的水晶球，而是衡量当下的卡尺。
在充满不确定性的金融市场中， “位置感” 是纪律执行的基石。`Market Compass` 为您提供的不是圣杯，而是一张永远保持更新的 战场态势感知地图 。请将它融入您现有的交易系统中，作为过滤低质量交易机会的第一道关卡。
---
本指标及此说明文件仅供教育及技术分析参考之用，绝不构成任何形式的买入、卖出或持仓建议。金融衍生品及证券交易蕴含巨大风险，过往价格结构及百分位分布不构成对未来走势的绝对保证。您必须结合自身财务状况、风险承受能力及独立研判做出交易决策，盈亏自负。作者不承担任何因使用本指标而产生的直接或间接损失。
---
如果您认可这套价格定位逻辑，欢迎点赞、收藏并关注！
期待您在评论区分享将该框架融入实战交易后的心得体会。
Market Compass - Dynamic Range Framework
Version: 1.0 | Type: Non-Predictive Price Structure Positioning Tool | Author:
The vast majority of trading losses stem not from incorrect directional judgment, but from a lack of "positional awareness" . This indicator addresses this core pain point — it does not tell you whether price will go up or down, but it does tell you "the precise coordinates of price on the map, at this very moment" .
---
This indicator is not a traditional moving average or momentum oscillator. Instead, it is a price percentile range positioning system based on a fixed lookback period . It uses the highest high and lowest low over the most recent N bars (default 252, corresponding to approximately one trading year) as natural boundaries, constructing a dynamic box grid spanning from 0% to 100%.
The grid is not evenly divided. It employs an asymmetric golden ratio and extreme-value anchoring methodology to precisely define 9 key horizontal threshold levels. These levels are cleanly overlaid on the main price chart using colored rectangular bands and real-time right-aligned floating labels:
100% Peak Threshold (Red): The absolute ceiling within the lookback period.
89% Overbought Warning Zone (Orange): Extreme euphoria zone; high probability of bullish exhaustion.
75% Bullish Boundary (Yellow): The bull-bear dividing line; breaking above signals medium-term strength.
62.5% Bull Pivot Threshold (Purple): Secondary retracement support level within an uptrend.
50% Equilibrium Axis (White): The value equilibrium line; a dense area of long-term capital cost.
37.5% Bear Pivot Threshold (Cyan): Secondary retracement resistance level within a downtrend.
25% Bearish Boundary (Light Blue): Breaking below signals a confirmed medium-term bearish trend.
11% Oversold Warning Zone (Light Green): Extreme panic zone; high probability of bearish exhaustion.
0% Floor Threshold (Dark Blue): The absolute floor within the lookback period.
As new bars are generated, the entire framework rolls forward iteratively , always anchored to the most recent price activity range, ensuring the reference coordinates never become obsolete.
---
Traditional price charts suffer from severe perspective limitations , leading traders into frequent misjudgments:
"Absolute Value Illusion" and Anchoring Bias : Is a price of $100 high or low? Discussing absolute price without reference to the recent trading range is meaningless. This indicator converts price into a relative percentile from 0 to 100 , eliminating the distortion of price magnitude and allowing you to objectively assess whether the current price is "relatively high" or "relatively low."
"Range Amnesia" and Recency Bias : The human brain naturally assigns excessive weight to the most recent 5–10 bars, easily forgetting key prior support and resistance structures. Through rolling window calculations, this indicator forcibly and prominently plots the price extremes of the past N bars on the current chart, correcting this cognitive bias.
Mean Reversion and Extreme Magnetic Attraction Theory : Financial market prices have long exhibited a statistical tendency to "revert from extreme values toward the center (50% equilibrium line)" . When price enters the extreme tail regions above 89% or below 11%, statistical probability dictates an inevitable gravitational pull toward the 50% axis. This framework provides precise quantitative刻度 for this "magnetic force."
---
This indicator serves as an excellent auxiliary tool for trend filtering, risk-reward assessment, and dynamic stop-loss/take-profit placement . Do not treat it as an independent entry signal; instead, regard it as a "quantitative foundation for price-action decision-making."
3.1 Three Classic Strategies Based on Market Context
【Trend Following Strategy】— For Strong Directional Markets
When price, after sufficient consolidation, breaks decisively above the 75% Bullish Boundary with a high-volume bullish candle, this serves as a key confirmation that the medium-term trend is shifting from consolidation to strength. If price subsequently retests the 75% level and finds support (forming a long lower wick), it represents an excellent "go with the macro trend, counter the micro pullback" add-on opportunity. In such cases, place your stop-loss below the 62.5% Bull Pivot Threshold.
【Mean Reversion Strategy】— For Range-Bound Markets
When price spikes rapidly above the 89% Overbought Warning Zone and simultaneously exhibits clear exhaustion patterns (such as shooting stars or bearish engulfing), this can be viewed as a short-term selling opportunity. The first target is the 75% level, and the second target is the 50% Equilibrium Axis. Conversely, when price plummets below the 11% Oversold Warning Zone and shows reversal signals, a short-term buying opportunity emerges.
【Breakout-Pullback Confirmation Strategy】— For Key Support/Resistance Transitions
Every percentage threshold possesses dynamic support/resistance properties. When price breaks upward through a given level (e.g., the 62.5% level) and subsequently retests that level on diminishing volume without breaking back below, this confirms that the level has successfully transitioned from resistance to support. This represents a highly favorable "Grade-A Entry Point" (minimal stop-loss, substantial upside potential).
3.2 Dynamic Stop-Loss and Take-Profit Placement Guide
Swing Long Positions : Use the 37.5% Bear Pivot Threshold as your ultimate hard exit line. As long as price remains above this level, you can confidently hold your long position, avoiding premature exits caused by early-stage volatility.
Short-Term Short Positions : Use the 62.5% Bull Pivot Threshold as your hard stop-loss line. Should price stage a strong rally and close above this level, the bearish thesis is invalidated, and you must exit decisively.
3.3 Parameter Adjustment Recommendations (By Trading Timeframe)
Daily Chart (Swing / Medium-to-Long Term) : Keep the default 252 (approximately one trading year), ideal for capturing annual bull-bear transitions.
Weekly Chart (Macro Trend / Position Sizing) : Consider adjusting to 52 (approximately one year of weekly bars) for identifying extreme percentiles within broader cycles.
Hourly / Minute Charts (Intraday / Scalping) : Consider adjusting to 50–100 . Longer lookbacks on lower timeframes cause the framework to become overly rigid, diminishing its short-term relevance.
---
4.1 Optimal Use Cases
Highly Liquid Equity Markets : CSI 300, S&P 500, major index constituents, and liquid individual stocks.
High-Liquidity Commodities and FX : Gold, Crude Oil, EUR/USD, and other major pairs.
Large-Cap Cryptocurrencies : Bitcoin (BTC), Ethereum (ETH), and similar assets.
4.2 Scenarios to Avoid or Use with Caution (Risk Red Lines)
Strictly avoid newly listed stocks with fewer than N bars of history : Although the code includes a built-in adaptive shortening mechanism, new issues are extremely unstable, and their highs/lows are vulnerable to manipulation, rendering the percentile framework nearly worthless.
Use with caution during continuous limit-up/limit-down extreme conditions : In powerful short squeezes or liquidity-driven crashes, price may remain persistently glued above the 100% level or below the 0% level. In such cases, the indicator becomes "blunted" , and you must immediately switch to trend-following tools (such as SAR or moving average systems) for secondary confirmation.
Avoid low-float "pump-and-dump" penny stocks : Sparse trading volume leads to erratic price jumps, causing the computed range to become highly distorted.
---
This indicator strictly adheres to PulseWire best practices and contains absolutely no future functions . All signals are computed in real time based on deterministic historical data.
5.1 Adaptive Lookback Core Algorithm
The system first reads the user-defined `lookbackLength` (default 252). However, when the loaded instrument has fewer total bars on the chart than the configured period, the engine automatically triggers a protective mechanism:
effectiveLookback = math.min(i_lookbackLength, bar_index + 1)
This single line ensures the indicator functions from the very first trading day, and the window gradually expands as new bars are added until it reaches the user's desired standard period.
5.2 Nine-Level Linear Mapping (Percentile Segmentation Mathematics)
The process begins by determining the box extremes and range:
periodLow = ta.lowest(low, effectiveLookback) // Floor at 0%
periodHigh = ta.highest(high, effectiveLookback) // Peak at 100%
priceRange = periodHigh - periodLow
The range is then divided using a heuristic blend of Fibonacci ratios and statistically inspired thresholds :
priceL89 = periodLow + priceRange * 0.89 // Extreme warning
priceL75 = periodLow + priceRange * 0.75 // Bullish boundary
priceL625 = periodLow + priceRange * 0.625 // Golden ratio pivot
priceL50 = periodLow + priceRange * 0.50 // Equilibrium axis
// ... Symmetrical lower-level calculations follow the same logic
Note: The selection of 62.5% and 37.5% is derived from a slight integer adjustment to the 0.618 golden ratio, intended to provide cleaner and more memorable reference刻度 than the traditional 61.8%.
5.3 Rendering Engine Optimization (Memory & Performance Management)
To prevent chart lag caused by repeatedly drawing rectangles and lines across numerous historical bars, the engine employs a "lazy deletion with single-instantiation" strategy:
if barstate.islast
// Only triggered when loaded and running at the rightmost edge of the chart
box.delete(boxMain) // Destroy old handles first
line.delete(lineL100) // Clean up old lines
// ... Then create new objects
All labels use the label.style_label_left right-aligned format, ensuring they line up neatly on the far right of the chart without ever obscuring the most recent price bars. Prices are displayed with precision down to the exchange's minimum tick size (`format.mintick`).
---
It is not a crystal ball for predicting the future; it is a caliper for measuring the present.
In the inherently uncertain financial markets, "positional awareness" is the cornerstone of disciplined execution. `Market Compass` does not offer you a holy grail; it offers you an ever-updating situational awareness map of the battlefield . Integrate it into your existing trading system and use it as the first filter to eliminate low-probability trade setups.
---
This indicator and its accompanying description are provided for educational and technical analysis purposes only. They do not constitute, and should not be construed as, any form of investment advice or recommendation to buy, sell, or hold any financial instrument. Trading securities and derivatives involves substantial risk of loss. Past price structures and percentile distributions do not guarantee future results. You are solely responsible for your own trading decisions, taking into account your financial situation, risk tolerance, and independent judgment. Neither the author nor the hosting platform accepts any liability for losses arising from the use of this indicator.
---
If you find this price-positioning logic valuable, please like, bookmark, and follow!
I look forward to hearing how you integrate this framework into your live trading. Feel free to share your experiences and feedback in the comments section below.
Indicator
Next Candle Predictor V4.1## Next Candle Predictor V4.1 — Terminology and Presentation Update
This update improves the clarity of the indicator's terminology and on-chart presentation while preserving its existing calculation framework, weighting structure, visual layout, and signal conditions.
### Changes
- Renamed displayed “Prediction” values to “Directional Score”.
- Replaced “Perfect Time” with “Strong Setup”.
- Renamed the volume-derived component to “Estimated Volume Pressure”.
- Renamed projection visuals to “Directional Scenario Candles”.
- Updated dashboard labels and alert messages for clearer interpretation.
- Removed performance-target wording.
- Added author attribution: Developed by Ceyhun C. Canbazoglu.
### Score Interpretation
The displayed long and short percentages are normalized directional confluence scores derived from the indicator’s rule-based components.
They are not statistical probabilities, expected win rates, guarantees, or forecasts of the next candle’s result.
### Estimated Volume Pressure
Estimated Volume Pressure uses OHLCV data and the closing price’s position within the candle range to estimate directional pressure.
It is not exchange-level bid/ask volume delta or actual aggressive buying and selling volume.
### Directional Scenario Candles
The optional scenario candles are volatility-scaled visualizations based on the indicator’s current directional scores.
They do not forecast the next candle’s exact open, high, low, close, direction, or price target.
### Core Framework
The existing multi-factor framework remains unchanged and continues to evaluate:
- trend direction,
- EMA alignment,
- MACD momentum,
- RSI position,
- Stochastic conditions,
- ADX trend strength,
- relative volume,
- estimated volume pressure,
- and volatility regime.
This indicator is intended as a technical-analysis and decision-support tool. It does not provide financial advice or guarantee trading results. Indicator
Chart Narrator [verticetrading]An analyst that writes. Chart Narrator reads your chart and describes it in plain sentences — no cryptic numbers, no jargon.
◆ WHAT IT DOES
It turns the chart into a written briefing: main trend and whether the higher timeframe agrees, unusual calm or agitation in volatility, the last structural break in plain words, nearest tested support/resistance with distances in %, fresh candlestick patterns, and volume participation. Everything is summarized in a bias header with a conviction score ("BULLISH — 4 of 5 signals point the same way").
◆ HOW IT WORKS
Six evidence modules (trend + higher-timeframe confirmation, volatility ranking, market structure, merged pivot levels weighted by touches, candlestick patterns, volume vs its average) each produce a verdict and the numbers behind it. A narration engine turns them into sentences, stays silent when a module has nothing to say, and detects confluences between modules (e.g. a bullish pattern printed on a tested support) to flag higher-quality situations. With enough history it also adds a day-of-week tendency note with its sample size.
◆ HOW TO USE IT
Add it to any symbol and timeframe. Read the panel top to bottom: bias first, evidence after. Set the "Bias flip" alert to receive the full written analysis when the overall picture changes. Interface in English and Spanish.
◆ WHAT MAKES IT ORIGINAL
Indicators show numbers; this one explains itself. Every sentence cites its evidence, only confirmed bars are narrated (no repainting), and the panel says "mixed, no clear edge" when that is the truth.
◆ LIMITATIONS
It describes the present; it does not predict. Not financial advice.
────────────────────────
ESPAÑOL — El analista que escribe
Convierte el gráfico en un informe escrito: tendencia y si la temporalidad mayor la confirma, calma o agitación inusual de la volatilidad, la última ruptura estructural en palabras llanas, soporte/resistencia más cercanos con distancias en %, patrones de velas recientes y participación del volumen — todo resumido en un sesgo con puntuación de convicción ("ALCISTA — 4 de 5 señales apuntan en la misma dirección"). Seis módulos de evidencia alimentan un motor de redacción que calla cuando no hay nada que decir y detecta confluencias entre señales. Solo narra velas confirmadas (sin repintado). Interfaz en inglés y español. Describe el presente, no predice; no es asesoramiento financiero. Indicator
Relative Strength (RS) - Mansfield StyleRelative Strength (RS) measures how a symbol performs against a chosen
benchmark. Instead of plotting the raw price ratio — whose scale differs
from one symbol to another and makes comparison difficult — this script
normalizes the ratio (symbol close / benchmark close) against its own
simple moving average over a configurable lookback "Period". The result
is a zero-centered line that reads the same way on any symbol:
- RS above 0 and rising → the asset is outperforming the benchmark
- RS below 0 and falling → the asset is underperforming
- Zero-line crossings → shifts in relative leadership
Only the direction and the position relative to zero matter, not the
absolute value.
█ HOW IT WORKS
1. The script requests the benchmark's close on the selected timeframe.
2. It computes the raw ratio: symbol close / benchmark close.
3. The ratio is divided by its SMA over the "Period" lookback, minus 1 —
expressing how far the current relative strength stands above or
below its recent average.
4. An optional moving average of RS can be displayed as a signal line.
█ INPUTS
- Comparative Symbol: the benchmark (an index such as SPX, a sector
index, or any peer symbol — e.g. compare gold against silver).
- Period (default 50): normalization lookback. Shorter = more reactive,
longer = smoother and slower.
- Show Moving Average / Moving Average Period: optional smoothing line.
- Timeframe: leave empty to use the chart's timeframe, or select a
higher timeframe for multi-timeframe analysis.
█ HOW TO USE
Apply the indicator to any symbol. When RS holds above zero, the asset
is leading its benchmark — favor it for relative-strength strategies
(buy strength). When RS holds below zero, the asset is lagging — avoid
it or rotate out. Zero-line crossovers flag early changes in relative
leadership, and two built-in alerts fire on these crossings.
RS is a relative tool, not a timing tool: an asset can outperform a
falling benchmark while still declining in absolute terms. Combine it
with your own trend or entry criteria.
█ CREDITS
The normalization method follows the Mansfield Relative Strength
concept popularized by Stan Weinstein in "Secrets for Profiting in
Bull and Bear Markets".
█ NOTE ON HIGHER TIMEFRAMES
When a higher timeframe is selected in the Timeframe input, the value
of the current forming bar updates until that bar closes. Historical
values do not repaint. Indicator
Adaptive Consensus Trail Structure, Regime & SelfAdaptive Consensus Trail — Structure, Regime & Self-Test
A trailing stop that sits on the agreement of several structural references, adapts to the market regime, and forward-tests its own signals so the numbers it shows are measured, not asserted.
What it is
Most trailing stops follow one idea — an ATR band, a SuperTrend, a moving average. This one places the stop where a small committee of independent structural references agree, reads how confident that agreement is, widens or tightens itself according to the market regime, and then continuously audits its own flips and reports the edge it actually produced on your data.
The committee has five members, each locating support/resistance from a different lens:
Anchored VWAP band — fair value for the session/week/month
Session / naked volume Point-of-Control — the price the most volume traded at, carried forward until revisited
Fair-Value-Gap midpoint — unfilled imbalance
Swing pivot — structural memory
Order-flow absorption — where aggressive buying/selling was absorbed (via Bulk Volume Classification)
Why these parts belong in one script (mashup justification)
Each reference alone whipsaws on an index, and each is right in different conditions. They are combined because they correct one another, and the entire value of the script is in that interaction — not in any single line:
A reliability layer scores every reference's historical respect rate with a Wilson lower bound, so a reference that keeps getting ignored loses its vote instead of dragging the stop around.
A consensus layer keeps only the densest agreeing cluster of references, so the stop sits on genuine agreement rather than on an average nobody respects, and far-apart references never force a permanent "no signal."
A regime layer (efficiency ratio + ADX + band-width + a volatility-cluster read + a Hurst persistence estimate) widens the band and tightens the flip confirmation in chop — this is what removes the whipsaw.
A self-test layer forward-scores every flip and recalibrates the confidence number so it means what it says.
Split apart, these are five overlays that each mislead in a range. Wired together, they are one self-correcting, self-auditing trail. That is the reason for combining them.
How it works (six layers)
References are computed on the bar close.
Reliability — rolling-capped respect counts per reference give a Wilson lower-bound "trust." POC is a magnet, so it is judged by forward reaction (did price reject away before breaking through?), not a same-bar close, which keeps its trust honest.
Consensus — the densest agreeing cluster within an ATR band becomes the trail's target; the envelope and confidence are measured on that cluster only.
Adaptive backbone — an efficiency-ratio / regime-adaptive band (Adaptive, Chandelier, or Blend) that widens in chop.
The trail — high confidence pulls the stop toward structure (floored a minimum ATR off price); low confidence rides the wide band, so it flips less in noise.
Self-test — every flip is forward-resolved by triple-barrier first-touch against an unconditional base rate, split by strength tier and by regime, with a walk-forward in-sample→out-of-sample check, a runs test of independence, a Brier score, and a confidence recalibration.
How to use it
Read the top banner for the one-line bias — BULLISH / BEARISH / WAIT — and the READ legend for what to do. The coloured line is your stop: support in an uptrend, resistance in a downtrend. BUY / SELL labels print only on confirmed, sufficiently-confident, higher-timeframe-aligned flips.
The dashboard gives detail top-down: each reference's level and trust, the consensus, raw → calibrated confidence, regime (with Hurst and ADX), the higher-timeframe invalidation stop, and a FULL / HALF / STAND-ASIDE suggestion.
Before sizing, open the Self-Test panel and read the Edge column (hit% − base%), not the raw hit-rate. A ★ means the edge's confidence interval clears the base rate. Prefer signals where the walk-forward change isn't badly negative and the runs test isn't "streaky." Being honest about it: on many indices this tool shows real edge in range and volatile regimes on higher timeframes and little-to-none on very low timeframes or once a trend is already confirmed — the panel makes that transparent so you can pick your spots.
Works on any market
Set the Price source, and for symbols with no native volume set a Borrow-volume proxy (e.g. a futures contract). The panel theme adapts to your chart background automatically. Backbone: Adaptive / Chandelier / Blend. Absorption: order-flow (BVC) or simple. An optional intrabar resolution builds a finer volume profile where available.
Originality
The committee-of-references design, the cluster-not-average consensus, the reliability weighting that lets references lose their vote, the forward-reaction POC respect test, and the confidence self-calibration are the author's own work. The underlying techniques are standard and fully credited below.
Non-repaint
References, regime, consensus and the trail all evaluate on the close of the bar; the live bar is provisional and settles on close. Self-test events are logged and resolved only on confirmed bars and resolve on bars after their trigger at fixed barriers, so hit / base / edge use no look-ahead. The higher-timeframe stop uses a lookahead-off request.
Concept credits
Wilson score interval (E. B. Wilson); efficiency ratio (P. Kaufman); ADX / DMI / ATR / volatility-stop lineage (J. W. Wilder); anchored VWAP (industry standard); volume profile / value area / point-of-control — Market Profile (J. P. Steidlmayer, developed by J. F. Dalton); triple-barrier first-touch labelling (M. López de Prado); runs test of randomness (A. Wald & J. Wolfowitz); rescaled-range / Hurst exponent (H. E. Hurst); Brier score (G. W. Brier); Bulk Volume Classification / VPIN (D. Easley, M. López de Prado & M. O'Hara); reliability-bin (isotonic-style) calibration is standard forecasting practice.
Limitations & disclaimer
"Absorption" is a volume proxy — base data has no true tick order flow, so the buy/sell split is estimated from bar moves, not measured. Confidence is context, not a promise of profit. The self-test is descriptive of past behaviour on the loaded symbol (fixed barriers, no costs or slippage) — a study aid, not a backtest and not a guarantee. A measured edge is what flips did historically here, not a forecast.
This script is for research and education only. It is not financial advice, not a recommendation to buy or sell, and not a guarantee of any outcome. Trading carries risk of loss; your decisions are your own. Test on your own data and use independent risk management before relying on it. Indicator
Keltner Channel ATR StretchKeltner Channel ATR Stretch is a Keltner Channel variant designed to show trend bias, price stretch, and volatility width in one compact view.
The script uses an EMA basis with ATR-scaled upper and lower bands. In addition to the channel itself, it normalizes the selected Source's distance from the EMA basis as Stretch, normalizes the EMA basis slope in ATR units as Bias, and ranks the current channel width against its recent min-max range as Width Rank.
The goal is not to create trade signals. The goal is to make the current chart state easier to read: whether price is inside the channel, moving with a trend bias, pulling back toward the basis, stretching beyond the outer band, reaching an extreme band, or returning inside the channel after an outside move.
Dashboard reading:
Bias shows the EMA basis direction normalized by ATR:
Bullish, Bearish, or Neutral.
Position shows where the selected Source is relative to the channel:
Trend Zone, Pullback, Upper Stretch, Lower Stretch, Extreme, or Inside.
Volatility shows the current channel width regime:
Quiet, Normal, or Expanded.
Stretch shows the distance from the EMA basis in outer-channel units.
A value near +1 means price is near the upper outer band.
A value near -1 means price is near the lower outer band.
Slope shows the EMA basis slope in ATR units.
Width Rank shows the current channel width relative to its recent min-max range.
It is a simple 0-100 rank of the current width inside its own recent range, not a statistical percentile.
How it works:
The basis is an EMA of the selected Source.
The outer bands are calculated as:
Basis plus or minus ATR multiplied by the ATR Multiplier.
The inner bands are a fractional zone inside the outer channel.
The optional extreme bands are a wider reference zone outside the outer channel.
Stretch is calculated as:
Source minus Basis, divided by the outer channel half-width.
Slope is calculated as:
Current EMA basis minus the basis from the selected lookback, divided by ATR.
Width Rank compares the current channel width to the lowest and highest channel width over the selected Width Rank Lookback.
Markers and alerts:
Upper stretch and lower stretch mark movement beyond the outer bands.
Upper extreme and lower extreme mark movement beyond the optional extreme band level.
Upper return inside and lower return inside mark when the selected Source moves back inside the outer channel after being outside it.
Trend bias changed marks a change in the ATR-normalized EMA basis direction.
Width regime changed marks a change between Quiet, Normal, and Expanded width states.
The Confirmed bars only setting is enabled by default. When it is enabled, markers and alerts evaluate only on closed bars. The dashboard reflects the current chart state, including the still-forming bar.
This is not a trading system. It is a visual analysis tool for reading channel position, trend bias, and volatility context. It does not provide trade instructions, entries, exits, or performance claims.
Limitations:
Keltner Channels are volatility-based bands and can expand or contract as ATR changes.
A stretch beyond a band does not necessarily mean price must reverse.
A quiet width regime does not guarantee expansion.
A bullish or bearish bias does not predict future direction.
Use this tool together with your own market context and risk management.
No financial advice.
This open-source script was written from scratch using Pine Script built-ins. No third-party Pine code was reused.
日本語補足:
Keltner Channel ATR Stretch は、EMAを中心にATR幅のチャネルを表示しながら、価格の伸び、EMAの傾き、チャネル幅の状態を同時に確認するためのインジケーターです。
右上のDashboardでは、Bias、Position、Volatilityを中心に、現在のチャート状態をすばやく確認できます。
Bias はATRで正規化したEMAの傾きです。
Position は価格がチャネル内、トレンドゾーン、押し目、上方向または下方向の伸び、極端な伸びのどこにあるかを示します。
Volatility はチャネル幅がQuiet、Normal、Expandedのどの状態にあるかを示します。
このスクリプトは売買システムではありません。
BUY/SELL、エントリー、利確、損切りを指示するものではなく、トレンド・行き過ぎ・ボラティリティの状態を読みやすくするための視覚補助ツールです。 Indicator
Indicator
Elaris Auto Trend Fibonacci ProElaris Auto Trend Fibonacci Pro
Overview
Elaris Auto Trend Fibonacci Pro is an advanced market structure and Fibonacci analysis tool designed to automatically identify directional trends, detect significant swing points, and project professional-grade Fibonacci retracement and extension levels directly on the chart.
Unlike manual Fibonacci drawing tools that require traders to constantly adjust anchor points, this indicator continuously analyzes confirmed swing structure and automatically maps the most relevant Fibonacci framework based on the current market trend.
The goal is to help traders quickly identify potential pullback zones, trend continuation areas, profit targets, and key reaction levels without manually redrawing Fibonacci levels throughout the trading session.
---
How The Indicator Works
1. Swing Structure Detection
The indicator first identifies confirmed swing highs and swing lows using a configurable pivot confirmation algorithm.
A swing is only considered valid after confirmation, which helps eliminate many false or premature swing points that often appear during volatile market conditions.
The minimum swing size can also be filtered using ATR-based validation, ensuring that insignificant market fluctuations are ignored.
---
2. Trend Identification
After detecting valid market structure, the indicator determines the dominant directional trend.
Bullish trends are identified when recent confirmed swing lows lead into higher confirmed swing highs.
Bearish trends are identified when recent confirmed swing highs lead into lower confirmed swing lows.
An optional EMA trend filter can be enabled to require alignment between price structure and moving average direction.
This additional layer helps reduce counter-trend Fibonacci projections.
---
3. Automatic Fibonacci Mapping
Once a valid trend is detected, Fibonacci levels are automatically projected between the most relevant confirmed swing points.
The indicator plots:
• 0.236 Retracement
• 0.382 Retracement
• 0.500 Midpoint
• 0.618 Golden Ratio
• 0.786 Deep Retracement
• 1.000 Retracement
These levels represent areas where pullbacks, reactions, trend continuations, or reversals may occur.
---
4. Golden Zone Highlighting
The area between the 50% and 61.8% retracement levels is automatically highlighted as the Golden Zone.
Many traders monitor this region because it often represents an area where institutional participants may re-enter an existing trend after a pullback.
The highlighted zone provides a quick visual reference for potential trend continuation opportunities.
---
5. Extension Targets
The indicator can optionally project Fibonacci extension levels beyond the current trend.
Available extension targets include:
• 1.272 Extension
• 1.618 Extension
• 2.000 Extension
These levels can be used as potential profit-taking areas, trend continuation objectives, or future reaction zones.
---
6. Trend Dashboard
A built-in dashboard provides real-time information including:
• Current trend direction
• Swing strength relative to ATR
• Fibonacci anchor direction
• Golden zone status
• Indicator operating mode
The dashboard helps traders evaluate current market conditions without needing additional analysis tools.
---
How To Use
Trend Continuation
1. Wait for a confirmed bullish or bearish trend.
2. Allow price to retrace toward the highlighted Fibonacci levels.
3. Monitor the Golden Zone for potential continuation setups.
4. Use extension levels as potential target areas.
Pullback Analysis
The 38.2%, 50%, and 61.8% retracement levels can help identify areas where temporary corrections may end and the primary trend may resume.
Target Projection
The Fibonacci extensions can be used to estimate possible future trend objectives after a successful continuation move.
---
Important Notes
• The indicator uses confirmed swing points and does not rely on future-looking calculations after confirmation.
• Fibonacci levels automatically update when a new confirmed market structure is established.
• The indicator is designed for trending markets and may generate fewer meaningful projections during prolonged ranging conditions.
• This tool is intended for technical analysis and should not be used as a standalone trading system.
---
Best Markets
The indicator can be applied to:
• Cryptocurrency Markets
• Forex Markets
• Stock Markets
• Index Markets
• Commodity Markets
It is particularly effective on higher liquidity instruments where market structure tends to be more consistent.
---
Best Timeframes
Recommended timeframes:
• 15 Minutes
• 1 Hour
• 4 Hours
• Daily
Higher timeframes generally produce more reliable market structure and Fibonacci projections.
---
Alerts
The indicator includes alerts for:
• Trend direction changes
• Golden Zone interactions
• Key Fibonacci level breaks
These alerts can be integrated into trading workflows for additional monitoring and confirmation.
---
Thank you for using Elaris Auto Trend Fibonacci Pro.
Indicator
Ribbon Conviction SystemRibbon Conviction System — Trend, Flow, Value and Adaptive Stop
Overview
This is a single decision-support system for intraday traders. It answers three questions on one chart: which way is the trend, how much conviction is behind the current move, and where a logical trailing stop sits. A moving-average ribbon defines direction, a conviction score from 0 to 100% grades every signal, and an adaptive volatility stop marks risk. The components are designed to work together as one filtered signal, not as a loose collection of separate indicators.
Why these components are combined
A moving-average crossover on its own fires constantly in sideways markets and gives no sense of whether a cross is meaningful. Each part added here exists to fix a specific weakness of the part before it, so the result is one filtered signal rather than several indicators stacked on a chart.
Ribbon (direction). Five Fibonacci-length averages — 8, 13, 21, 34, 55 — using a mix of Hull, EMA and Kaufman Adaptive Moving Average (KAMA). The KAMA anchors deliberately flatten in choppy conditions, so the ribbon stops giving direction when there is no trend. Weakness it leaves open: a crossover can still fire on a weak, low-conviction move.
Conviction score (filter). Instead of taking every crossover, each signal is graded 0–100% by blending four independent readings of the same bar, chosen because they measure different things rather than repeat each other:
Buy/sell flow — net buying versus selling pressure, inferred from lower-timeframe price-and-volume behaviour.
Effort vs move — how far price travelled for the volume spent; absorption and churn are penalised.
Trend quality — Kaufman Efficiency Ratio: directional travel divided by total path, separating trend from noise.
Price location — is price on the right side of value? Blends session VWAP slope, a swing-anchored VWAP, the session volume-profile value area (VAH/VAL/POC), and the prior session's VWAP and unfilled POC.
A flow-toxicity proxy (VPIN-style) then lowers the score when flow looks one-sided and unstable. Weakness it leaves open: all four readings come from the chart timeframe, so they can agree for the wrong reason.
Higher-timeframe agreement (independent confirmation). The same volatility-stop direction is computed on 3×, 5× and 15× the chart timeframe and folded in as a multiplier, not a fifth blended input. It is kept separate precisely because it is the one genuinely independent check on the chart-timeframe score: full agreement raises conviction, disagreement lowers it.
Adaptive volatility stop (risk). A Chande-style volatility stop whose ATR period and multiplier adapt through the Efficiency Ratio, so the stop tightens in clean trends and widens in chop. This turns the tool from "where is the signal" into "where is my risk if I take it."
How they work together
Direction (ribbon) decides the side. The conviction score decides whether a crossover on that side is worth showing and how strongly. Higher-timeframe agreement scales that conviction up or down. The adaptive stop shows the exit reference. Every signal is the product of all four stages working in sequence.
What it plots
The five-average ribbon with shaded bands; the 55 line is the bold trend-reference band.
Signal badges at qualifying crossovers, labelled with the band crossed and the conviction percent (for example "21 65%").
Optional value references: session VWAP, swing-anchored VWAP with bands, volume-profile VAH/VAL/POC, and the prior session's VWAP and POC.
The adaptive volatility stop as a step line with a live distance label.
A compact dashboard summarising trend, conviction and each component, higher-timeframe agreement, the stop, and the data mode.
A small higher-timeframe agreement ribbon.
How to use
Add it to an intraday chart. The defaults suit index futures, but direction works on any symbol.
Spot vs futures: many spot indices publish no real volume, which the flow, value-area and toxicity parts depend on. Under "Data source" the script auto-detects this and switches the volume-based parts to a time-at-price method so everything still works; you can also set the mode manually. The dashboard "Data" row shows which mode is active.
Trade in the ribbon's direction. Prefer signals with a higher conviction percent and higher-timeframe agreement, and treat low-conviction crosses as noise. Use "Hide signals weaker than" to suppress them.
Use the adaptive stop as a trailing-risk reference, sized to your own plan.
The "Look & size" group controls signal size, dashboard size and position, a "Minimal" preset (ribbon + signals + stop only), and band lightness.
Originality
The individual techniques — adaptive moving averages, the Efficiency Ratio, effort-versus-result, VWAP, volume profile and volatility stops — are publicly documented. What is original here is the integration: a single conviction score that fuses chart-timeframe flow, effort, efficiency and value, damps it by flow toxicity, and scales it by independent higher-timeframe agreement, then gates an adaptive-stop-aware signal on that score. The components were selected so each covers a distinct weakness, and redundant filters were deliberately left out to keep one clear signal.
Credits
Perry Kaufman — Adaptive Moving Average and Efficiency Ratio. Tushar Chande — Volatility Stop concept. The effort-versus-result component is an original, compact reimplementation inspired by the publicly described effort-versus-result method from the volume-spread-analysis lineage.
Disclaimer
This script is for education and information only. It is not financial, investment or trading advice and does not guarantee any outcome. Signals describe current conditions; they do not predict the future. Markets carry substantial risk of loss. Volume-based readings depend on the data feed and are unreliable on instruments without real volume. Always test on your own market and timeframe, and manage risk with your own stops and position sizing. The author is not a licensed financial advisor; consult a qualified professional before making financial decisions. You are solely responsible for your own trading decisions. Indicator
Heikin Ashi Cloud Overlay | Rainbow MatrixGENERAL OVERVIEW
The Heikin Ashi Cloud Overlay renders a Heikin Ashi cloud directly on top of traditional candlesticks, giving traders both views in a single chart. HA candles smooth macro trend perception by filtering individual-bar noise, but they sacrifice entry-bar precision because each HA candle does not represent the actual price range traded on that bar. This script preserves both signals simultaneously: the HA cloud surfaces directional context, while the underlying real candles preserve precise execution-bar timing.
A compact corner HUD reports current HA direction, consecutive streak length, and body-size anomalies relative to a 20-bar rolling average — useful for monitoring momentum exhaustion and impulsive expansion in real time without analyzing the cloud manually.
The script adds a visual intelligence layer on top of the standard HA pattern: cloud fill opacity dynamically reflects body intensity (impulsive bars render densely opaque, normal bars render lightly), and small colored dots flag body anomalies (current body > 3× rolling average) directly on the chart.
WHAT IS THE THEORY BEHIND THIS INDICATOR?
Heikin Ashi candles are derived from traditional OHLC via a recursive smoothing formula introduced by Munehisa Homma in 18th-century Japanese rice trading and popularized in modern Western technical analysis through the work of Dan Valcu and others. The transformation produces candles that emphasize trend persistence over discrete price action: consecutive same-color HA candles indicate ongoing directional pressure, while doji-like HA candles or sudden color flips often signal pivots.
The trade-off is well-known: HA candles do not show real OHLC. The haOpen of each candle is the average of the previous haOpen and haClose, not the actual session open. This makes HA excellent for trend reading but unreliable for entry timing — orders need to reference the actual price range of the bar, not the smoothed projection.
The conventional solutions are either to switch back and forth between HA and regular candle views (cognitive overhead), or to use HA as the primary chart and lose precision on entries (execution cost). This indicator takes a third approach: render the HA candles as a transparent overlay envelope on top of the standard candlesticks. The trader sees both at once. The HA envelope communicates trend context; the underlying candles preserve real-bar precision.
The state machine layered on top — direction tracking, streak counting, and body-size anomaly detection against a rolling average — converts the visual cloud into a numerical readout, surfacing exhaustion and impulsive moves that might be missed at a glance.
HA CLOUD OVERLAY FEATURES
The indicator includes 5 main components:
Heikin Ashi Cloud Overlay
Body Intensity Modulation (dynamic opacity)
Body Anomaly Visual Markers
HA State HUD Panel
Three Optional Alerts
HEIKIN ASHI CLOUD OVERLAY
🔹 What It Does
For each bar on the chart, the indicator computes the four Heikin Ashi values (haOpen, haClose, haHigh, haLow) using Pine Script's canonical recursive formula. It then renders a thin envelope between haHigh and haLow with semi-transparent fill, plotted on top of the underlying traditional candles.
🔹 Method
The computation follows the standard HA definition:
◇ haClose = (open + high + low + close) / 4
◇ haOpen = average of the previous haOpen and the previous haClose (recursive)
◇ haHigh = max of (high, haOpen, haClose)
◇ haLow = min of (low, haOpen, haClose)
A `var float ha_open = na` seed pattern handles the first-bar initialization safely, avoiding NA propagation that would corrupt the recursive chain.
🔹 Visual Behavior
The envelope is rendered as a thin top-bottom band with translucent fill. The fill color reflects the HA direction: bullish (haClose ≥ haOpen) renders in the configured bull color (PulseWire native teal by default); bearish (haClose < haOpen) renders in the bear color (PulseWire native red by default). An optional midline (dotted) at the (haOpen + haClose) / 2 level can be toggled for traders who prefer an explicit midpoint reference.
BODY INTENSITY MODULATION
🔹 What It Does
The cloud fill transparency is dynamically modulated based on the current HA body size relative to the 20-bar rolling average. Bars with above-average body push the fill toward more opaque, surfacing impulsive expansion clusters visually without requiring HUD analysis.
🔹 Tier Logic
◇ Body < 1× average: standard transparency (user-configured slider value)
◇ Body 1-2× average: −10 transparency (notable bar — slightly more opaque)
◇ Body 2-3× average: −30 transparency (strong bar — clearly more opaque)
◇ Body ≥ 3× average: −50 transparency, floor 20 (anomaly — densely opaque)
The floor cap of 20 prevents the fill from becoming so opaque that the underlying candle wicks become unreadable, preserving the dual-view principle of the indicator.
🔹 Why It Helps
Body intensity modulation converts the cloud from a static color band into a momentum-aware visualization. During quiet conditions, the cloud whispers; during impulsive expansion or capitulation phases, the cloud intensifies visually. Traders monitoring multiple charts can identify regime changes peripherally without focusing on any single chart's HUD.
🔹 Toggle
The feature is enabled by default and can be disabled via the "Body Intensity Cloud Opacity" input in the HA CLOUD group, which restores fixed transparency from the slider.
BODY ANOMALY VISUAL MARKERS
🔹 What It Does
A small colored dot appears on the chart whenever the current HA body exceeds 3× the 20-bar rolling average. Bull anomalies render as a dot below the bar (location.belowbar); bear anomalies render as a dot above the bar (location.abovebar). Dot colors match the configured bull/bear palette.
🔹 Why It Helps
The markers convert the alert-only body anomaly detection into a persistent visual signal that remains visible on chart history. Traders reviewing past price action can identify impulsive expansion or capitulation events at a glance, without scrolling through alert history or replaying bars.
🔹 Independent of the Alert
The visual markers and the body anomaly alert are independently toggleable. Traders can show the markers without enabling the alert (visual-only mode) or enable the alert without showing the markers (sound/notification-only mode).
🔹 Toggle
Enabled by default via the "Show Body Anomaly Markers" input in the HA CLOUD group.
HA STATE HUD PANEL
🔹 What It Shows
A compact 4-row corner panel reports three live values:
◇ Direction — current HA candle direction (Bull / Bear), color-coded
◇ Streak — consecutive same-direction count (in current locale, e.g., "7 velas (candles)" in PT)
◇ Avg Body — the average HA body size over the last 20 bars, expressed as a percentage of price
🔹 Why It Helps
The HUD converts the cloud into a numerical readout. Instead of visually estimating streak length or body proportion, traders can read the exact values on each bar. This is particularly useful for traders monitoring multiple charts or running automated rules where consecutive-bar conditions need to be tracked precisely.
🔹 Customization
The HUD can be positioned in any of the four chart corners and rendered in any of five font sizes. The Direction row uses contrasting colors (bull vs bear) for immediate parsing.
THREE OPTIONAL ALERTS
🔹 Alert Types
Each alert is independently toggleable in the indicator settings:
◇ HA Direction Change — fires on the close of a confirmed bar when the HA direction flips (bull→bear or bear→bull). Useful as a confirmation filter on top of other entry signals.
◇ HA Streak Exhaustion — fires when the absolute streak length crosses a user-configurable threshold (default 7). Long consecutive streaks often precede mean-reversion phases, especially in ranging markets.
◇ HA Body Anomaly — fires when the current HA body exceeds 3× the 20-bar rolling average. Anomalous body sizes typically signal impulsive expansion, capitulation, or news-driven moves worth investigating.
🔹 Firing Mechanism
All alerts are gated by `barstate.isconfirmed`, which means they only trigger on the close of the bar that satisfies the condition — never intra-bar. This prevents false signals from intrabar fluctuations that get rejected before close. Each alert uses `alert.freq_once_per_bar` to avoid duplicate firings on the same candle.
🔹 alertcondition() Mode
A dummy `alertcondition` titled "HOW TO SETUP ALERTS (READ)" is exposed at the bottom of the script. It provides setup guidance via its message field, instructing users to select "Any alert() function call" in the PulseWire alert condition menu and filter individual alerts via the indicator settings.
MULTILINGUAL INTERFACE
The indicator supports five languages for the HUD display and alert messages: English (default), Português, Español, Русский, and 中文 (Chinese). Code, comments, and configuration tooltips remain in English regardless of the selected language.
For reference, examples of multilingual UI strings used in the HUD:
◇ Direction labels: "Direction:" / "Direção:" / "Dirección:" / "Направление:" / "方向:"
◇ Direction text: "🟢 BULL"/"🔴 BEAR" / "🟢 ALTA"/"🔴 BAIXA" / "🟢 ALCISTA"/"🔴 BAJISTA" / "🟢 БЫЧИЙ"/"🔴 МЕДВЕЖИЙ" / "🟢 多头"/"🔴 空头"
◇ Streak units use a bilingual pattern: "candles" stays in English as a universal technical term; native terms appear in parentheses where the local equivalent is well-established (e.g., "7 velas (candles)").
CUSTOM PALETTE TOGGLE
🔹 What It Does
By default, the indicator uses native PulseWire teal/red colors for visual familiarity. A "Use Custom Cloud Colors" toggle in the settings switches to user-configurable bull/bear colors, useful for traders who want to align the cloud palette with their personal indicator stack or color preferences.
HOW TO USE
This indicator is a visualization tool, not a signal generator. It surfaces three categories of structural information: HA direction (smoothed trend context), streak length (momentum persistence), and body anomalies (impulsive moves).
🔹 Reading the Cloud
◇ Bull cloud (default teal) = current HA candle is bullish (haClose ≥ haOpen).
◇ Bear cloud (default red) = current HA candle is bearish (haClose < haOpen).
◇ A long sequence of same-color HA candles indicates strong directional pressure; mixed colors or doji-like HA candles indicate consolidation or pivot zones.
◇ Cloud density (opacity): denser fills mark bars with above-average body — pay attention to these zones, they often correspond to ignition or capitulation phases.
◇ Anomaly dots: when a dot appears below a bull bar or above a bear bar, the bar's body is 3× the recent average — exceptional impulse worth contextualizing against your other signals.
🔹 Reading the HUD
◇ Direction row: parse the current HA candle's directional state at a glance.
◇ Streak row: |streak| ≥ 7 → trend is mature, increasing probability of mean reversion or pullback. Streak just flipped sign → fresh direction.
◇ Avg Body row: current bar body > 3× this value → impulsive expansion or capitulation, worth investigating contextually.
🔹 Tactical Reading
◇ HA color flip + confirmation on the underlying candle: potential trend reversal or pullback entry.
◇ HA streak crosses the exhaustion threshold while price approaches a key level (from another indicator or manual S/R): increased probability of structural reaction.
◇ Body anomaly during otherwise quiet conditions: impulsive move (often news-driven or stop-cascade) — trade with reduced size or wait for retest.
◇ Cluster of dense-opacity bars: regime change or ongoing impulsive move — momentum is structurally elevated.
🔹 Multi-Indicator Workflow
The HA Cloud Overlay is designed to layer cleanly with other indicators. It does not add lines or boxes that compete visually with structural indicators (VWAP, Volume Profile, S/R). The cloud sits behind the candles, the markers are minimal dots, and the HUD sits in a corner — total chart footprint is minimal.
INPUTS EXPLAINED
🔹 System Language
Display language for the HUD and alert messages. Options: English (default), Português, Español, Русский, 中文.
🔹 Show Cloud Envelope
Master toggle for the HA top-bottom envelope and fill.
🔹 Cloud Fill Transparency
Base alpha of the cloud fill (60 = denser, 95 = barely visible). Floor of 60 keeps candle wicks readable. Default 80. When Body Intensity Modulation is ON, this value is the baseline; bars with above-average body intensity become progressively more opaque from this baseline.
🔹 Show HA Midline (dots)
Optional thin dotted line at (haOpen + haClose) / 2.
🔹 Use Custom Cloud Colors
OFF: native PulseWire teal/red. ON: apply custom bull/bear colors below.
🔹 Custom Bull Color / Custom Bear Color
Used when "Use Custom Cloud Colors" is ON.
🔹 Body Intensity Cloud Opacity
When ON: cloud fill becomes progressively more opaque on bars with above-average body size. When OFF: cloud uses fixed transparency from the slider above. Recommended ON.
🔹 Show Body Anomaly Markers
When ON: small colored dots appear on bars whose body exceeds 3× the 20-period average. Independent of the body anomaly alert.
🔹 Show HA State HUD
Toggle for the corner HUD reporting Direction / Streak / Avg Body.
🔹 HUD Position
Top Right (default), Top Left, Bottom Right, Bottom Left.
🔹 Font Size
Tiny, Small (default), Normal, Large, Huge.
🔹 Streak Warning Threshold
Streak length at which the Streak Exhaustion alert fires. Range 3–30, default 7.
🔹 Alert: HA Direction Change / HA Streak Extreme / HA Body Anomaly
Independent toggles for each of the three alert types.
IMPORTANT NOTES
The Heikin Ashi Cloud Overlay works on any timeframe and any instrument. The HA computation is timeframe-agnostic — it transforms whatever OHLC data the chart provides.
Alerts fire once per confirmed bar. Historical bars never repaint after they close. The live bar updates intra-bar as expected for a real-time indicator, but alerts will only fire after the bar closes. Body anomaly visual markers can update intra-bar (preview behavior) and settle on close.
The body anomaly threshold (3× rolling average) and streak warning threshold (default 7) are derived from empirical observation across common timeframes and instruments. Both are user-configurable and should be tuned to the trader's instrument and timeframe — high-volatility crypto on 1m may warrant a higher anomaly multiplier than large-cap equities on Daily.
The 20-bar body rolling average uses `ta.sma` of the percentage-based body size. The first 20 bars after script start will show partial values; once enough history is available, the value stabilizes.
The body intensity modulation tier floors (50, 30, 20) are calibrated to preserve candle wick readability even on extreme anomaly bars — the floor 20 ensures the cloud never becomes fully opaque.
Pine Script v6. Open-source under Mozilla Public License 2.0.
UNIQUENESS
The Heikin Ashi Cloud Overlay differs from the standard PulseWire Heikin Ashi chart type and from other HA-based indicators in four structural ways.
First, it preserves both views simultaneously rather than replacing one with the other. Standard HA chart mode hides the real candles entirely; this overlay keeps the underlying candles visible at all times, giving traders smoothed trend context (the cloud) and precise entry-bar timing (the underlying candles) in the same visual without context-switching cost.
Second, the cloud fill opacity is dynamically modulated by body intensity relative to a 20-bar rolling average. Standard HA cloud indicators render fills with a single static transparency; this script renders impulsive bars (≥1×, ≥2×, ≥3× average body) with progressively more opaque fills, transforming the cloud from a static visualization into a momentum-aware density map. Capitulation, ignition, and impulsive expansion phases become visually identifiable peripheral signals.
Third, it adds an explicit state machine layer over the raw HA visualization. Direction tracking, consecutive streak counting, 20-bar rolling body-size anomaly detection, and on-chart visual anomaly markers convert the visual cloud into a numerical readout reported live on a corner HUD. This converts subjective visual estimation (is this a long streak? is this body unusually large?) into deterministic measurements with configurable thresholds and a persistent visual record on the chart history.
Fourth, it exposes three independently-toggleable alerts (direction change, streak exhaustion, body anomaly) gated by bar confirmation, making the indicator usable as a confirmation filter or trigger source in automated workflows. Most HA-based indicators are visualization-only or expose a single direction-flip alert; the multi-condition alert set here is designed for traders building structured rules around HA state rather than just observing it.
The combination of dual-view preservation, body-intensity opacity modulation, state machine readout, visual anomaly markers, and multilingual UI produces a single overlay that combines the readability of Heikin Ashi smoothing with the precision of real candles, the rigor of a deterministic state readout, and the visual intuition of a density-aware momentum map. Indicator
Relative Strength Pullback Map [AGPro Series]Relative Strength Pullback Map
🧠 Core Idea
Is the pullback happening while the asset remains a relative leader against its benchmark?
📌 Overview / What it does
Relative Strength Pullback Map is a benchmark-relative price-action tool built to study whether an asset is pulling back from strength or breaking down into weakness.
The script compares the active symbol against a selected benchmark, builds a relative-strength baseline, evaluates leader status, measures pullback depth, maps a pullback pocket, marks the recovery rail, and summarizes the full context inside a compact AG Pro panel.
It does not predict future price, automate trades, or claim that every leader pullback must recover. It is a structured decision-support map for reading relative strength, benchmark leadership, pullback health, recovery readiness, and relative breakdown risk.
🎯 Purpose & Design Philosophy
Pullbacks are not all equal.
Some pullbacks happen while the asset continues to outperform its benchmark.
Other pullbacks happen because relative strength is already breaking down.
This script was built to separate those two conditions. The design goal is to help traders identify whether a pullback belongs to a still-strong relative leader or a weakening laggard.
⚡ Why This Script Is Different
Most pullback tools focus only on price.
Most relative-strength tools focus only on the ratio line.
This script does NOT treat pullback quality and relative strength as separate ideas.
Instead, it combines benchmark-relative leadership, price pullback depth, trend shelf behavior, recovery rail reclaim, and relative breakdown risk into one visual map.
The focus is not only whether price pulled back.
The focus is whether the asset remained a leader while pulling back.
⚙️ Methodology
1. Benchmark Comparison
The script compares the active symbol against a selected benchmark using a relative-strength ratio.
2. Relative Strength Baseline
The ratio is smoothed into a baseline so leadership can be evaluated against its own recent behavior.
3. Leader Status Scoring
Leader status combines relative-strength distance, relative-strength slope, and price trend structure.
4. Pullback Depth Measurement
The script measures how far price has pulled back from the recent high using ATR-normalized depth and percentage depth.
5. Pullback Pocket Mapping
The pullback pocket is mapped between the fast recovery rail and the deeper trend shelf.
6. Recovery Evaluation
The script checks whether price is reclaiming the recovery rail while relative strength remains constructive.
7. Visual Output
The chart displays the pullback pocket, recovery rail, relative-strength rail, leader/laggard labels, right-side context tags, alerts, and a compact AG Pro panel.
🗺️ How to Read the Chart
Relative Pullback Pocket = the area where a leader pullback can remain structurally constructive.
Recovery Rail = the fast trend rail used to evaluate whether price is starting to recover from the pullback.
RS LEADER tag = the active symbol is outperforming the selected benchmark with constructive relative strength.
PULLBACK tag = the current pullback depth measured in ATR.
LEADER PULLBACK = the asset remains a relative leader while pulling into a meaningful pullback area.
RS HOLD = relative strength remains constructive during the pullback.
RECOVERY READY = price reclaimed the recovery rail while relative strength remained constructive.
RS BREAK = relative strength weakened or price broke the deeper pullback shelf.
Panel = summarizes relative state, quality score, leader status, pullback depth, recovery trigger, benchmark, and next context.
🚦 Signals & States
• LEADER PULLBACK → the asset remains a relative leader while pulling back.
• RS HOLD → relative strength is still holding during the pullback.
• RECOVERY READY → price reclaimed the recovery rail with constructive relative strength.
• RS BREAK → relative strength weakened or the pullback shelf broke.
• LAGGARD RISK → price is pulling back while the asset is no longer a clear relative leader.
🔔 Alerts Logic
Alerts can trigger when a leader pullback appears, relative strength holds, recovery becomes ready, or relative breakdown appears.
These alerts are attention markers only.
They are not trade instructions, entry signals, exit signals, or guaranteed outcomes.
🧩 Confluence Logic
The context becomes stronger when the active symbol remains above its relative-strength baseline, relative-strength slope is constructive, pullback depth is meaningful but not too deep, and price starts reclaiming the recovery rail.
The context becomes weaker when relative strength drops below its baseline, the slope turns down, or price breaks below the deeper trend shelf.
📊 When to Use
• During trend pullbacks
• When comparing an asset against a benchmark
• In crypto rotation analysis
• In stock or ETF relative-strength review
• When looking for leader pullbacks rather than weak pullbacks
• When filtering pullbacks by benchmark-relative performance
⚠️ When NOT to Use
• On symbols with poor benchmark fit
• During extremely noisy sideways markets
• In low-liquidity markets with unreliable candles
• When benchmark data is missing or unsuitable
• As a standalone buy or sell system
🎛️ Key Inputs
• Benchmark Symbol → defines the market used for relative comparison.
• Relative Strength Baseline → controls the smoothing length of the RS ratio.
• RS Slope Lookback → controls how relative-strength direction is evaluated.
• Minimum Leader Score → controls how strict leader classification should be.
• Fast Trend Length → controls the recovery rail.
• Slow Trend Length → controls the deeper pullback shelf.
• Pullback Lookback → controls the recent high used to measure pullback depth.
• Maximum Healthy Pullback ATR → controls when a pullback becomes too deep.
• Label and Panel Font Size → controls chart readability.
🖥️ Interface & Visual Design
The visual design is built around one question:
Is this still a leader pullback?
The pullback pocket shows the structural area, the recovery rail marks the reclaim reference, the relative-strength rail keeps benchmark context visible, the labels mark state changes, and the AG Pro panel summarizes the current decision context.
🧪 Practical Usage Workflow
1. Select an appropriate benchmark.
2. Read the panel first.
3. Check whether the asset is a relative leader.
4. Review pullback depth.
5. Look at the pullback pocket.
6. Watch whether price reclaims the recovery rail.
7. Confirm the broader market structure independently.
🔍 Interpretation Guidelines
A leader pullback means the asset is pulling back while still holding relative strength.
An RS hold means relative leadership has not broken yet.
Recovery ready means price has started reclaiming the recovery rail while relative strength remains constructive.
An RS break means the pullback may no longer be a clean leader pullback.
None of these states guarantee what happens next.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a financial advice tool.
It is not an automated trading system.
It does not guarantee recovery after a leader pullback.
It does not guarantee that relative leaders will continue outperforming.
It does not replace risk management or independent analysis.
⚠️ Limitations & Transparency
Relative strength depends heavily on benchmark selection.
Different benchmarks may produce different interpretations.
Different timeframes may show different relative-strength states.
Fast markets can move through the pullback pocket quickly.
Sideways markets may create unclear relative-strength readings.
🧠 Market Context Notes
Relative strength is most useful when combined with structure, trend, volatility, and market regime.
A pullback in a relative leader can be constructive if leadership remains intact.
A pullback with relative breakdown is a weaker context and should be interpreted with caution.
Benchmark choice matters: crypto pairs may use BTCUSDT, stock charts may use SPY, sector ETFs, or another relevant benchmark.
🧾 Use Case Examples
When ETH pulls back while still outperforming BTC, the script can identify whether the pullback remains constructive or starts losing relative strength.
When a stock pulls back against SPY but relative strength holds above baseline, the script can highlight a leader pullback context.
When price breaks the pullback shelf while RS weakens, the script can flag relative breakdown risk.
🧱 System Philosophy
Relative Strength Pullback Map is part of the AGPro Series approach:
Build visual tools that explain market context clearly, avoid hype, avoid prediction claims, and support structured decision-making.
The goal is not to tell users what to do.
The goal is to help users see whether a pullback belongs to a strong leader or a weakening asset.
🔐 Non-Promise Statement
No script can remove uncertainty from trading.
This tool does not promise accuracy, certainty, profitability, or future performance.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, position sizing, risk management, benchmark selection, and interpretation.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this script as a structured way to study relative strength, benchmark leadership, pullback depth, and recovery context.
The most valuable output is not a single label.
The value is the full map: relative state, leader status, pullback pocket, recovery rail, and next context.
Indicator
Trend Maturity Ladder [AGPro Series]Trend Maturity Ladder
🧠 Core Idea
Is the trend still early, healthy, mature, stretched, or vulnerable to exhaustion?
📌 Overview / What it does
Trend Maturity Ladder is a trend lifecycle visualization tool built to classify the stage of an active trend.
The script builds a staged trend ladder, maps a healthy pullback shelf, marks an invalidation shelf, tracks maturity score, evaluates extension, identifies exhaustion risk, and summarizes the current lifecycle state in an AG Pro panel.
It does not predict price direction, automate trades, or claim that a mature trend must reverse. It is a structured decision-support tool for reading trend stage, pullback quality, and late-trend risk.
🎯 Purpose & Design Philosophy
Many trend tools answer only one question:
Is price trending?
This script was built to answer a more useful question:
Where is the trend in its lifecycle?
The design goal is to help traders separate early trend development, healthy continuation, mature structure, stretched extension, and invalidation pressure.
⚡ Why This Script Is Different
Most trend tools focus on moving average direction, ribbon color, or generic trend strength.
This script does NOT act as another trend-strength meter or moving-average ribbon.
Instead, it models the trend as a ladder with stages: early trend, active trend, mature trend, stretched trend, exhaustion watch, and invalidation pressure. It combines trend alignment, slope, ADX, distance from the slow trend reference, trend age, pullback depth, and momentum risk into one visual lifecycle map.
⚙️ Methodology
1. Context Detection
The script checks fast, slow, and anchor trend alignment to determine whether the market has a bullish trend, bearish trend, or mixed structure.
2. Maturity Scoring
It scores trend age, ATR-adjusted extension, slope, ADX, and moving-average alignment to estimate how mature the trend is.
3. Pullback Evaluation
It builds a healthy pullback shelf around the trend references and checks whether price is pulling back without breaking the broader ladder.
4. Exhaustion and Invalidation Review
It identifies late-trend extension risk and invalidation pressure when price closes through the trend shelf.
5. Visual Output
The chart displays maturity ladder zones, pullback shelves, invalidation shelves, trend rails, event labels, right-side tags, alerts, and a compact AG Pro panel.
🗺️ How to Read the Chart
Trend Maturity Ladder = the active lifecycle zone around the current trend.
Healthy Pullback Shelf = the area where pullbacks can remain structurally constructive.
Invalidation Shelf = the area where the trend ladder becomes vulnerable.
Trend Rails = fast, slow, and anchor trend references.
EARLY TREND = trend alignment is fresh.
ACTIVE TREND = trend structure is aligned and still developing.
MATURE TREND = trend has aged and expanded meaningfully.
STRETCHED TREND = the trend is extended relative to its slow reference.
EXHAUSTION WATCH = maturity, extension, and momentum conditions suggest late-trend risk.
INVALIDATION PRESSURE = price has closed through the invalidation shelf.
Panel = summarizes trend stage, maturity score, direction, pullback health, exhaustion risk, age, extension, and next context.
🚦 Signals & States
• EARLY TREND → trend alignment is fresh and still developing.
• ACTIVE TREND → trend is aligned and not yet deeply mature.
• MATURE TREND → trend has aged and expanded.
• STRETCHED TREND → price is extended from the slow trend reference.
• HEALTHY PULLBACK → price has pulled into the trend shelf without invalidating it.
• EXHAUSTION RISK → maturity, extension, and momentum risk are aligned.
• INVALIDATION PRESSURE → price has closed through the invalidation shelf.
• NO CLEAR TREND → fast, slow, and anchor references are not aligned.
🔔 Alerts Logic
Alerts trigger when a major trend lifecycle state appears.
• Trend Maturity Transition → the active trend stage changes.
• Healthy Trend Pullback → price pulls into the healthy trend shelf without invalidating the ladder.
• Trend Exhaustion Risk → maturity, extension, and momentum conditions align.
• Trend Invalidation Pressure → price closes through the invalidation shelf.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The context becomes stronger when:
• Fast, slow, and anchor trend references align
• The slow reference has directional slope
• ADX supports directional structure
• Pullbacks respect the healthy shelf
• Extension is not excessively stretched
• The panel state agrees with the chart label
Late-trend caution increases when maturity, extension, and RSI pressure align.
📊 When to Use
• Trend-following review
• Pullback continuation planning
• Late-trend risk monitoring
• Crypto, stocks, futures, forex, and liquid markets
• 30m, 1H, 4H, 1D, and 1W charts
• Markets where trend structure is visible
⚠️ When NOT to Use
• Very choppy, non-directional markets
• Low-liquidity assets
• Extremely noisy micro timeframes
• Markets with frequent gaps that distort trend references
• Situations where a single trend score should not be over-interpreted
• When the user wants guaranteed entries or exits
🎛️ Key Inputs
• Fast Trend Length → controls short-term trend pressure.
• Slow Trend Length → controls the main maturity reference.
• Anchor Trend Length → filters weak or mixed trend regimes.
• ATR Length → controls ladder spacing, extension scoring, and label offsets.
• Early Trend Max Age → defines how long a fresh trend can remain early.
• Mature Trend Age → defines when age contributes strongly to maturity.
• Stretched Distance ATR → defines when trend extension becomes stretched.
• Healthy Pullback Width ATR → controls the pullback shelf thickness.
• Invalidation Shelf ATR → controls the distance of the invalidation shelf.
• Exhaustion RSI Level → adds momentum pressure to exhaustion-risk logic.
🖥️ Interface & Visual Design
The visual hierarchy is built around the trend lifecycle:
The ladder shows the active maturity zone.
The pullback shelf shows where continuation can be evaluated.
The invalidation shelf shows where the trend becomes vulnerable.
Event labels mark lifecycle transitions and risk states.
Right-side tags keep the current trend stage visible.
The AG Pro panel compresses the current trend lifecycle into a fast, readable summary.
🧪 Practical Usage Workflow
1. Read the panel trend stage.
2. Check whether trend direction is aligned.
3. Locate the healthy pullback shelf.
4. Watch whether price respects or breaks the shelf.
5. Check maturity score and exhaustion risk.
6. Confirm with market structure, liquidity, volume, and risk planning.
🔍 Interpretation Guidelines
An early trend does not guarantee continuation.
A mature trend does not guarantee reversal.
Exhaustion risk does not mean price must immediately turn.
Invalidation pressure means the current ladder structure has weakened.
The script is best used to understand trend lifecycle context, not to replace independent analysis.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed entry or exit signals.
It is not a moving-average ribbon or a simple trend-strength meter.
⚠️ Limitations & Transparency
Trend stages depend on timeframe.
Choppy markets can create frequent stage changes.
Strong news moves can stretch trend references quickly.
Low-liquidity markets may create unreliable trend readings.
Different assets may require different trend lengths.
🧠 Market Context Notes
Trends often move through recognizable phases:
alignment → expansion → maturity → extension → pullback or invalidation.
This script visualizes that sequence so the user can avoid treating every trend as equally fresh.
🧾 Use Case Examples
If trend references align shortly after a transition, the script may classify EARLY TREND.
If price pulls into the shelf while the ladder remains intact, the script may mark HEALTHY PULLBACK.
If the trend becomes aged and extended while RSI is stretched, the script may mark EXHAUSTION RISK.
If price closes through the invalidation shelf, the script may mark INVALIDATION PRESSURE.
🧱 System Philosophy
The goal is not to chase trend strength.
The goal is to understand trend timing.
This script treats trend as a lifecycle:
early → active → mature → stretched → vulnerable.
🔐 Non-Promise Statement
No trend stage guarantees future price direction.
No pullback shelf guarantees continuation.
No exhaustion label guarantees reversal.
All outputs should be interpreted as analytical context.
📉 Risk Disclosure
Trading involves risk.
This script is for educational and analytical purposes only.
It does not provide financial advice, investment advice, or guaranteed trading outcomes.
Users are fully responsible for their own decisions, risk management, and trade execution.
📚 Educational Note
Use the script to study where trends tend to age, stretch, reset, or fail.
The most important question is not only whether a market is trending.
The better question is whether the trend is still fresh enough to deserve attention.
Indicator
Indicator
Crypto Market Breadth Risk Planner [AGPro Series]Crypto Market Breadth Risk Planner
🧠 Core Idea
Is the crypto market showing broad risk-on participation, weakening rotation, or a risk-off breadth environment?
📌 Overview / What it does
Crypto Market Breadth Risk Planner is a chart-first market breadth tool built to evaluate whether a selected crypto basket is participating broadly or weakening internally.
Instead of reading only the active chart symbol, the script reviews a configurable basket of major crypto pairs. It measures how many symbols are trading above their trend baseline, how many have positive momentum, how many have rising trend structure, and how much volatility stress is present across the basket.
The script produces a 0-100 Breadth Risk Score, a colored breadth risk corridor on the active chart, event labels, right-side tags, alerts, and a compact AG Pro panel. It does not predict price direction, automate execution, or claim that breadth alone is enough to trade.
🎯 Purpose & Design Philosophy
This script was built because single-chart analysis can look strong while the broader crypto market is quietly weakening, or look weak while breadth is beginning to rotate back into strength.
The purpose is to help traders read market participation before treating an individual setup as clean. Strong setups usually have a better context when the broader basket is aligned, while weaker breadth can warn that a chart may be more exposed to false follow-through.
The design supports traders who want broader market context without opening ten charts manually. It turns cross-market participation into a simple decision-support layer that can be read directly on the current chart.
⚡ Why This Script Is Different
Most crypto tools focus on the active symbol, a single benchmark, a simple correlation reading, or a raw relative-strength line.
This script does NOT act as a benchmark correlation meter, a relative-strength rotation map, a volume spike detector, or a generic trend dashboard.
Instead, it evaluates breadth across a user-defined crypto basket and converts that participation into a risk-readiness framework. The goal is not to say which coin to buy or sell. The goal is to show whether the broader crypto environment is supportive, mixed, stressed, or risk-off.
⚙️ Methodology
1. Context Detection
The script requests data from a configurable crypto basket and evaluates each symbol on the selected breadth timeframe.
2. Reference Mapping
Each symbol is compared against its own trend baseline, momentum reading, trend slope, and ATR-based volatility stress condition.
3. Reaction Evaluation
The script combines trend participation, momentum participation, slope confirmation, and volatility stress into a single Breadth Risk Score.
4. Visual Output
The final output includes a colored breadth risk corridor, centered corridor text, event labels, right-side tags, optional bar coloring, alerts, and an AG Pro panel.
🗺️ How to Read the Chart
Zones:
The breadth risk corridor is a visual context zone around price. Its color reflects the current breadth regime rather than a direct support or resistance level.
Labels:
Labels mark important breadth state transitions such as Risk-On, Rotation Watch, Risk-Off, Stress Review, and Cooling.
Colors:
Teal represents broad constructive participation.
Pink represents risk-off breadth or weak participation.
Gold represents stress or caution.
Indigo represents improving rotation or transitional breadth.
Panel:
The panel summarizes breadth participation, Breadth Risk Score, momentum, stress, regime, and action state.
🚦 Signals & States
• Risk-On Ready → Broad participation and momentum are strong enough to support risk-on review.
• Rotation Watch → Breadth is improving, but not yet strong enough for full risk-on classification.
• Stress Review → Volatility stress is elevated while breadth quality remains weak.
• Risk-Off → Basket participation is weak or deteriorating.
• Cooling → Stress is easing while breadth quality begins to improve.
• Wait Breadth → No strong breadth regime is currently active.
🔔 Alerts Logic
Alerts can trigger when the basket shifts into Risk-On, Rotation Watch, Risk-Off, Stress Review, or Cooling.
Alerts are attention markers only. They highlight changes in the breadth model. They are not trade instructions, automated entries, or guaranteed market calls.
🧩 Confluence Logic
The context becomes stronger when multiple breadth layers align together.
For example, a high Breadth Risk Score with many symbols above their trend baselines, positive momentum participation, rising trend slopes, and low stress suggests a cleaner risk-on environment than a rally led by only one or two symbols.
Likewise, weak participation combined with elevated stress can warn that individual bullish setups may need stricter review.
📊 When to Use
• Crypto market context review
• BTC, ETH, altcoin, and sector-style crypto watchlists
• 1H, 4H, and 1D market participation analysis
• Before treating individual setups as risk-on
• When the trader wants to know whether the broader crypto basket supports the active chart
⚠️ When NOT to Use
• Markets where selected symbols have unreliable data
• Very small or illiquid crypto pairs with distorted candles
• Situations where the basket does not match the user's trading universe
• Low-timeframe scalping where external-symbol breadth may be too slow
• News-driven events where correlation and breadth can change abruptly
🎛️ Key Inputs
• Crypto Basket Symbols → define the assets used in the breadth model
• Breadth Timeframe → controls whether the basket is evaluated on chart timeframe, 1H, 4H, or 1D
• Trend Baseline Length → controls the EMA reference used for participation
• Momentum Length → controls the ROC window used for positive or negative participation
• ATR Stress Threshold → controls when basket volatility begins to count as stress
• Minimum Risk-On Score → controls how selective the risk-on state should be
• Visual Settings → control corridor, labels, right-side tags, panel location, theme, and font size
🖥️ Interface & Visual Design
The interface is designed to make broad crypto participation readable without turning the chart into a large dashboard.
The corridor gives a fast visual state directly on the chart. The panel provides the structured readout. Labels mark only important transitions, while cooldown and memory controls keep historical events from overwhelming the chart.
The visual intent is premium, clean, and publication-friendly.
🧪 Practical Usage Workflow
1. Read the panel to identify the current breadth regime.
2. Check the Breadth Risk Score and participation percentage.
3. Review whether momentum and stress support or conflict with the active chart setup.
4. Use the corridor color as a market-context layer, not as a direct entry zone.
5. Combine breadth context with price structure, volatility, liquidity, and personal risk rules.
🔍 Interpretation Guidelines
A strong score means the selected crypto basket is broadly aligned according to the script's rules.
A Rotation Watch state means breadth is improving, but the market has not fully confirmed broad risk-on participation.
A Stress Review state means volatility pressure is elevated while breadth remains weak or mixed.
A Risk-Off state means the selected basket is not supporting broad participation under the current settings.
🚫 What This Script Is NOT
This script is not a prediction engine.
This script is not financial advice.
This script is not an automated trading system.
This script does not place orders.
This script does not guarantee market direction, continuation, reversal, or profitability.
⚠️ Limitations & Transparency
This script depends on the selected symbols, selected timeframe, and PulseWire data availability.
Different baskets can produce different breadth readings. A BTC-heavy basket may behave differently from an altcoin-heavy basket. External symbol data may also load differently depending on market, exchange, and PulseWire availability.
The script should be interpreted as market context, not as a standalone execution model.
🧠 Market Context Notes
Crypto often moves through participation waves. Sometimes BTC leads while altcoins lag. Sometimes the whole market rotates together. Sometimes volatility rises while breadth deteriorates, creating a more fragile environment.
This script is designed to make that internal participation easier to observe directly from the active chart.
🧾 Use Case Examples
Example 1:
BTC is breaking higher, but the panel shows weak breadth and high stress. The trader may decide that the move needs extra confirmation before treating it as broad risk-on.
Example 2:
ETH is consolidating, but the basket shifts into Rotation Watch with improving momentum. The trader can monitor whether the active chart begins to align with the broader rotation.
Example 3:
The basket prints Risk-Off while an individual altcoin setup looks technically clean. The script warns that the broader market backdrop is not supportive under the current model.
🧱 System Philosophy
AGPro Series tools are built as decision-support frameworks, not signal vending machines.
This script follows that philosophy by turning broad market participation into a structured context layer: define the basket, score the breadth, map the state, and show the next action clearly.
🔐 Non-Promise Statement
This script does not promise certainty.
It does not promise that a risk-on breadth state will produce gains, or that a risk-off state will produce losses. It only organizes participation context so the user can evaluate the broader market with more clarity.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly, and breadth models can fail or become less useful during sudden volatility, exchange-specific moves, or news-driven repricing. Users remain responsible for their own decisions, execution, and risk management.
This script is for educational and analytical purposes only. It does not provide financial advice.
📚 Educational Note
Use this tool to study how crypto breadth changes before, during, and after major market moves.
Its strongest value comes from comparing the active chart with the broader basket context rather than reading any single label in isolation.
Indicator
Trend Exhaustion Snapback Planner [AGPro Series]Trend Exhaustion Snapback Planner
🧠 Core Idea
Is the current trend stretch becoming snapback-ready, or is momentum still supported enough to avoid calling exhaustion too early?
📌 Overview / What it does
Trend Exhaustion Snapback Planner is a rule-based trend exhaustion and mean-reversion planning tool. It measures how far price has stretched away from its trend mean, then evaluates whether that stretch is supported by pressure, efficiency loss, wick behavior, and room back toward value.
The script produces an exhaustion pocket, snapback rail, failure rail, room reference, event labels, right-side tags, optional bar coloring, and a compact AG Pro dashboard with a 0-100 Snapback Score.
It does not predict reversals. It helps organize trend stretch, exhaustion quality, snapback reclaim behavior, failure risk, and next-action state.
🎯 Purpose & Design Philosophy
Strong trends can stay stretched for longer than expected. At the same time, many reversals begin only after a trend becomes inefficient and price starts moving back toward value.
This script was built to help traders review that transition without relying on a simple overbought or oversold reading.
It supports a patient workflow: identify stretch, wait for reclaim behavior, evaluate room, then interpret the active state within broader market context.
⚡ Why This Script Is Different
Most exhaustion tools focus on RSI extremes, distance from a moving average, or isolated reversal candles.
This script does NOT treat every stretched move as a reversal.
Instead, it maps a live exhaustion pocket, scores stretch quality, tracks snapback reclaim behavior, defines where the idea fails, and shows whether there is room back toward the trend mean.
⚙️ Methodology
1. Trend Stretch Detection
The script measures price distance from a trend mean using ATR normalization.
2. Pressure Evaluation
RSI pressure, wick behavior, and trend-efficiency loss are reviewed to decide whether the extension is weakening.
3. Snapback Rail Mapping
Once a valid exhaustion pocket appears, the snapback rail becomes the first reclaim threshold.
4. Risk / Room Structure
The failure rail marks continuation risk, while the room rail shows the value or structure reference that price may test after reclaim.
5. Visual Output
The chart receives the exhaustion pocket, trend mean, snapback rail, failure rail, room rail, event labels, right-side tags, optional bar coloring, and dashboard panel.
🗺️ How to Read the Chart
The exhaustion pocket marks the stretch area created after price moves far away from its trend mean.
The snapback rail shows the reclaim level that improves the snapback context.
The failure rail marks where continuation risk invalidates the active snapback idea.
The room rail shows the next value or structure reference after the snapback begins.
Labels highlight stretch pockets, snapback reclaim, pocket pressure, room tests, and failed snapbacks.
Colors represent context:
• Teal → bullish snapback context
• Pink → bearish snapback context or failure
• Gold → room, waiting, or neutral review
• Indigo → pocket pressure or monitoring context
The panel summarizes:
• Pocket
• Snapback Score
• Stretch
• Room
• Action
🚦 Signals & States
• Bull Snapback Pocket → downside trend stretch with bullish snapback context
• Bear Snapback Pocket → upside trend stretch with bearish snapback context
• Snapback Reclaim → price reclaimed the active snapback rail
• Pocket Pressure → price is testing the exhaustion pocket without clean reclaim
• Room Test → price reached the active room reference
• Failed → price crossed the failure rail
• READY → reclaim and score quality are strong enough to monitor
• MONITOR → snapback context is active but not fully ready
• WAIT RECLAIM → pocket exists but reclaim has not confirmed
• EXPIRED → the pocket is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a bullish or bearish snapback pocket appears, when price reclaims the snapback rail, when the READY state appears, when pocket pressure appears, when the room rail is reached, or when the context fails.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The context becomes stronger when ATR stretch, RSI pressure, wick behavior, efficiency loss, snapback reclaim, and room back toward value align.
No single condition is treated as enough by itself.
📊 When to Use
• Mature directional moves
• Strong extensions away from trend mean
• Markets with visible impulse and reaction structure
• 1H, 4H, and 1D review where exhaustion context matters
• Crypto, indices, forex, and liquid stocks
⚠️ When NOT to Use
• Extremely illiquid symbols
• Very low-volume periods
• News shock candles with abnormal gaps
• Very tight ranges with no meaningful trend stretch
• Markets where spreads or wicks dominate the structure
🎛️ Key Inputs
• ATR Length → normalizes trend stretch and rail distances
• Trend Mean Length → controls the main value reference
• Minimum Stretch ATR → controls how stretched price must be before a pocket appears
• RSI Pressure → controls pressure thresholds for extended conditions
• Efficiency Length → controls how trend efficiency loss is measured
• Minimum Ready Score → controls how strict READY classification is
• Projection Bars → controls how far rails and zones extend
• Visual settings → control labels, tags, panel location, theme, and font size
🖥️ Interface & Visual Design
The panel is designed as a compact decision dashboard, not a large data table.
The first row uses a merged AG Pro header. The remaining rows show the pocket state, score, stretch context, room, and action.
The visual hierarchy is built so traders can read the active plan quickly without losing chart structure.
🧪 Practical Usage Workflow
1. Read the panel.
2. Check whether an exhaustion pocket is active.
3. Watch the snapback rail for reclaim behavior.
4. Review failure risk and room back toward value.
5. Interpret labels as context markers, not trade commands.
🔍 Interpretation Guidelines
A high score means the active stretch has multiple snapback conditions aligned.
A snapback reclaim improves the context, but it does not guarantee continuation toward the room rail.
A failed state means price crossed the continuation-risk boundary for that active pocket.
Use the script to organize the question, not to outsource the answer.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not place orders.
It does not guarantee reversal timing, target reach, or profitability.
⚠️ Limitations & Transparency
Trend exhaustion can remain extended for long periods.
Different timeframes may show different exhaustion and snapback contexts.
Volatility spikes can distort ATR-normalized distance.
Low liquidity can create false stretch pockets or unreliable wick behavior.
The script is rule-based and should be interpreted within broader market context.
🧠 Market Context Notes
Trend exhaustion is not the same as trend reversal.
The most useful snapback contexts often appear when price stretches away from value, momentum efficiency weakens, and reclaim behavior begins before the failure rail breaks.
The strongest readings usually come from alignment between structure, volatility, and reaction quality.
🧾 Use Case Examples
When price stretches far above the trend mean, RSI pressure rises, and the candle begins reclaiming back through the snapback rail, the bearish snapback context may become more meaningful.
When price stretches below the trend mean but cannot reclaim the snapback rail, the script may remain in WAIT RECLAIM or PRESSURE instead of READY.
When price reaches the room rail after reclaim, the context shifts into room review rather than fresh entry signaling.
🧱 System Philosophy
AGPro Series tools are built as decision-support systems.
They aim to convert market structure into readable context: what is active, what improves the plan, what invalidates it, and what should be reviewed next.
🔐 Non-Promise Statement
No script can provide certainty.
No signal guarantees outcome.
This tool provides structured context only.
📉 Risk Disclosure
Trading involves risk.
Markets can move quickly and unexpectedly.
Users are responsible for their own analysis, risk management, and decisions.
This script does not provide financial advice.
📚 Educational Note
Use this tool to study how trend stretch, momentum pressure, efficiency loss, and snapback behavior interact across different markets and timeframes.
Indicator
Post-Breakout Risk Ladder [AGPro Series]Post-Breakout Risk Ladder
🧠 Core Idea
After a breakout happens, is the move still offering clean target room or is pullback risk taking control?
📌 Overview / What it does
Post-Breakout Risk Ladder maps a breakout base, locks the breakout edge, and converts the post-breakout move into a structured R-based risk ladder.
The script displays a breakout base, pullback risk shelf, entry rail, invalidation rail, 1R / 2R / 3R target rails, target defense labels, pullback test labels, and a compact AG Pro dashboard.
It does not predict that a breakout will continue. It helps organize what happens after a breakout: current R, pullback risk, target room, invalidation, and action state.
🎯 Purpose & Design Philosophy
Many breakout tools focus only on the breakout candle.
This script was built for the part that comes next: the risk management phase after the breakout is already visible.
It helps traders read whether the breakout is still structured, whether the pullback is healthy, whether the next target has room, and whether the breakout context has failed.
⚡ Why This Script Is Different
Most breakout indicators highlight the break itself.
This script does NOT treat the breakout as the end of the analysis.
Instead, it builds a post-breakout planning map with a base, entry reference, invalidation shelf, R ladder, pullback risk score, target room, and target defense context.
⚙️ Methodology
1. Breakout Base Detection
The script defines a recent base using completed bars and checks whether price closes beyond the base edge with enough displacement quality.
2. Breakout Lock
When the breakout qualifies, the script locks the base high/low, breakout edge, entry reference, and invalidation edge.
3. Risk Ladder Mapping
Risk is standardized into R units from the breakout entry to invalidation. Target rails are projected as 1R, 2R, and 3R references.
4. Pullback and Defense Evaluation
The script tracks pullback tests into the breakout shelf, current R, target room, and target defense behavior.
🗺️ How to Read the Chart
The breakout base shows the structure that price broke from.
The pullback shelf marks the zone where a retest may remain constructive or become risky.
The entry rail and invalidation rail define the R unit.
The 1R, 2R, and 3R rails show post-breakout target references.
Labels highlight breakout locks, pullback tests, target defense, and invalidation.
The panel summarizes:
• Breakout state
• Current R
• Pullback risk
• Target room
• Action state
🚦 Signals & States
• Bull Breakout → price closed above the breakout base with acceptable quality
• Bear Breakout → price closed below the breakout base with acceptable quality
• Pullback Test → price is testing the post-breakout shelf
• Target Defense → price has reached or interacted with an R target rail
• Invalidated → price lost the active breakout structure
• Expired → the breakout ladder is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a breakout ladder is locked, when the breakout context is READY, when price tests the pullback shelf, when the ladder invalidates, or when target defense appears.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The breakout context becomes stronger when base quality, breakout body strength, relative volume, pullback shelf behavior, and target room align.
The R ladder helps separate structured continuation from late or overextended movement.
📊 When to Use
• After clear range breaks
• During breakout retests
• In trending markets with continuation attempts
• When evaluating post-breakout risk-to-room structure
• On liquid symbols with readable candles and volume
⚠️ When NOT to Use
• Very low-liquidity markets
• Extremely noisy sideways ranges
• Random spike candles without structure
• News candles with unstable spreads
• When no meaningful base exists before the breakout
🎛️ Key Inputs
• Base Lookback Bars → controls how the breakout base is detected
• Break Buffer ATR → controls how far beyond the base price must close
• Minimum Break Body Ratio → filters weak wick-only breaks
• Minimum Relative Volume → filters low-participation breaks
• Retest Shelf ATR → controls the pullback shelf around the broken edge
• Invalidation Buffer ATR → controls where the ladder fails
• Target R Settings → control the 1R / 2R / 3R ladder rails
🖥️ Interface & Visual Design
The visual hierarchy is designed around post-breakout planning.
The base defines context, the shelf defines pullback risk, the rails define R structure, and the panel provides a quick state read.
The goal is to keep the chart useful, structured, and premium without turning it into a cluttered signal board.
🧪 Practical Usage Workflow
1. Check whether a breakout ladder is active
2. Read current R in the panel
3. Inspect the pullback shelf
4. Compare target room with pullback risk
5. Watch invalidation and target defense labels
🔍 Interpretation Guidelines
A READY state means the breakout ladder has enough structure to monitor.
Current R helps measure how far price has moved from the breakout reference.
Pullback risk helps evaluate whether price is still respecting the breakout shelf.
Target room helps avoid treating late moves the same as early moves.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a guaranteed breakout system.
It is not an automated trading tool.
It does not provide financial advice.
It does not guarantee continuation, reversal, targets, or profit.
⚠️ Limitations & Transparency
Breakout quality depends on market structure, volatility, liquidity, and timeframe.
Some breakouts may fail quickly.
Some slow breakouts may not trigger if candle quality or volume is too weak.
R levels are planning references, not guaranteed destinations.
🧠 Market Context Notes
Breakouts are often strongest when structure, participation, and follow-through align.
A breakout with clean target room and controlled pullback risk is different from a late breakout already pressing into extension.
Use the ladder as context, not certainty.
🧾 Use Case Examples
When price breaks above a recent base, the script locks the breakout edge and projects 1R / 2R / 3R references.
If price later pulls back into the shelf, the script marks pullback risk so the user can evaluate whether the structure remains intact.
If price reaches a target rail, target defense labels help identify where the move may need confirmation.
🧱 System Philosophy
AGPro Series tools are built as decision-support engines.
The purpose is to organize market behavior into structure, score, state, and risk context rather than providing blind buy or sell calls.
🔐 Non-Promise Statement
No breakout is certain.
No target rail is guaranteed.
No script can remove risk.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, decisions, risk management, and execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how breakout bases, retests, invalidation, current R, and target room interact across different markets and timeframes.
Indicator
Anchored VWAP Risk Ladder [AGPro Series]Anchored VWAP Risk Ladder
🧠 Core Idea
After an important market event, is price trading close to fair value or becoming extended relative to the anchored VWAP?
📌 Overview / What it does
Anchored VWAP Risk Ladder builds a volume-weighted average price from a selected anchor event and turns the distance from that anchor into a structured risk ladder.
The script displays anchored VWAP, volume-weighted deviation bands, right-side ladder tags, reclaim and lose labels, extension context, and a compact AG Pro panel with distance, score, risk ladder, and action state.
It does not predict price direction, automate trades, or claim that anchored VWAP will hold as support or resistance. It organizes event-based volume-weighted context into a readable chart framework.
🎯 Purpose & Design Philosophy
Anchored VWAP is often useful after a meaningful event, but raw AVWAP alone can be difficult to interpret without context.
This script was built to answer a practical question: how far is price from the anchored value area, and is that distance becoming useful, balanced, or risky?
The design supports traders who think in terms of anchored fair value, risk distance, reclaim behavior, and extension zones.
⚡ Why This Script Is Different
Most VWAP tools show a line and leave interpretation fully manual.
This script does NOT stop at plotting anchored VWAP.
Instead, it builds a complete risk ladder around the anchor, adds deviation context, scores reclaim or lose behavior, and summarizes the current state in a clean dashboard.
⚙️ Methodology
1. Anchor Detection
The script can anchor from manual time, high-volume events, swing pivots, session open, week open, or month open.
2. AVWAP Calculation
From the active anchor, the script accumulates volume-weighted price and volume-weighted variance to calculate anchored VWAP and deviation bands.
3. Risk Ladder Mapping
Distance from anchored VWAP is measured in ATR and deviation terms to classify whether price is near value, inside Band 1, inside Band 2, or extended.
4. Visual Output
The script plots AVWAP, upper/lower deviation bands, ladder fills, event labels, right-side tags, bar state color, and a dashboard.
🗺️ How to Read the Chart
The AVWAP rail represents the volume-weighted average price from the active anchor.
Deviation bands represent the ladder around anchored value.
Labels mark anchor events, AVWAP reclaim events, AVWAP lose events, and optional extension-risk conditions.
The panel shows:
• Anchor → current anchor type and age
• Distance → price distance from AVWAP in ATR
• Risk Ladder → current ladder zone and risk score
• Score → current context score and direction state
• Action → READY / MONITOR / WAIT / BLOCKED
🚦 Signals & States
• Anchor Locked → a new event anchor has been selected
• Ready Reclaim → price has reclaimed anchored VWAP with enough context score
• Ready Lose → price has lost anchored VWAP with enough context score
• Near AVWAP → price is close to anchored value
• Band 1 / Band 2 → price is moving away from anchored value
• Extended → distance from AVWAP is elevated
🔔 Alerts Logic
Alerts can trigger when a new anchor is locked, when price reclaims AVWAP, when price loses AVWAP, or when extension-risk conditions appear.
Alerts are attention markers only. They do not represent trade instructions or guaranteed outcomes.
🧩 Confluence Logic
The context becomes stronger when anchored VWAP reclaim or lose behavior aligns with relative volume, acceptable distance, and a clear ladder state.
The risk ladder helps separate balanced conditions from extension conditions.
📊 When to Use
• After high-volume market events
• Around earnings, news, breakout, or liquidation-style candles
• During trend continuation pullbacks
• When studying institutional average price context
• On liquid symbols with meaningful volume data
⚠️ When NOT to Use
• Very low-liquidity symbols
• Markets with unreliable or synthetic volume
• Extremely choppy conditions where anchors reset too often
• Situations where the selected anchor is not meaningful
• When using AVWAP as a standalone trading signal
🎛️ Key Inputs
• Anchor Mode → controls how AVWAP is anchored
• Manual Anchor Time → user-defined anchor timestamp
• High Volume Anchor Threshold → controls automatic high-volume anchors
• Deviation Band 1 / 2 → controls ladder width
• Extension Risk ATR → controls when distance becomes elevated
• Minimum Ready Score → controls reclaim or lose strictness
• Visual Settings → control bands, labels, tags, panel, and bar colors
🖥️ Interface & Visual Design
The interface is built for fast visual hierarchy.
AVWAP is the central reference, deviation bands define the risk ladder, right-side tags make the ladder readable, and the panel summarizes state without forcing the user to inspect every line manually.
🧪 Practical Usage Workflow
1. Choose the anchor mode
2. Read the active anchor and distance in the panel
3. Check whether price is near AVWAP or extended
4. Watch reclaim or lose labels around AVWAP
5. Use broader structure and risk context before making any decision
🔍 Interpretation Guidelines
Price near AVWAP often represents a balanced value area relative to the anchor.
Price far from AVWAP may represent stronger trend behavior, but it may also carry extension risk.
READY states mark meaningful reclaim or lose behavior, not certainty.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not an automated trading system.
It does not guarantee support, resistance, continuation, reversal, or profit.
It is not financial advice.
⚠️ Limitations & Transparency
Anchored VWAP quality depends heavily on anchor selection.
Different timeframes may produce different anchor timing and visual structure.
Volume data quality may vary between symbols, brokers, and exchanges.
Deviation bands are statistical references, not fixed market boundaries.
🧠 Market Context Notes
Anchored VWAP works best when the anchor represents a meaningful market event.
High-volume displacement, swing pivots, session opens, weekly opens, and monthly opens may each tell a different story.
The user should choose the anchor mode that best fits the market question.
🧾 Use Case Examples
When a high-volume candle creates a new anchor, the script tracks whether price remains near the anchored value area or begins to extend away from it.
When price reclaims AVWAP with enough score, the script marks a READY reclaim context.
When price loses AVWAP with enough score, the script marks a READY lose context.
🧱 System Philosophy
AGPro Series tools are built as decision-support engines.
The purpose is to structure market context into readable zones, states, scores, and risk references without turning analysis into blind signal-following.
🔐 Non-Promise Statement
No script can provide certainty.
No AVWAP level guarantees a reaction.
No signal guarantees continuation, reversal, or profit.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, decisions, risk management, and execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how anchored value, volume-weighted distance, deviation bands, reclaim behavior, and extension risk interact across different market conditions.
Indicator
Order Flow Imbalance Recovery Planner [AGPro Series]Order Flow Imbalance Recovery Planner
🧠 Core Idea
Can a high-volume displacement pocket recover with enough absorption and follow-through to become actionable chart context?
📌 Overview / What it does
Order Flow Imbalance Recovery Planner maps high-volume displacement candles, converts them into practical imbalance recovery pockets, and evaluates whether price can recover that pocket with measurable response.
The script produces imbalance pockets, recovery rails, continuation corridors, invalidation shelves, target reference rails, event labels, and a compact AG Pro dashboard with a 0-100 recovery score.
This script does not read live order book data, footprint data, bid/ask tape, or true exchange-level order flow. It uses chart-available volume, relative volume, candle displacement, wick response, and recovery behavior as a practical visual proxy.
🎯 Purpose & Design Philosophy
The script was built for traders who want a structured way to study volume imbalance recovery instead of reacting to every large candle.
Many displacement candles look important at first, but the useful question is whether price can return to the pocket, absorb pressure, and recover the key rail.
The design supports a context-first workflow: identify the imbalance, observe the test, evaluate the recovery quality, and then read the current state.
⚡ Why This Script Is Different
Most tools mark volume spikes or wide candles as isolated events.
This script does NOT treat every high-volume candle as a signal.
Instead, it builds a recovery pocket, scores the reaction around that pocket, separates test conditions from READY conditions, and keeps invalidation visible.
⚙️ Methodology
1. Context Detection
The script searches for directional displacement candles with elevated relative volume, meaningful candle range, and sufficient body commitment.
2. Reference Mapping
When a valid imbalance is found, the script maps a recovery pocket and a recovery rail around the displacement body.
3. Reaction Evaluation
Price interaction with the pocket is evaluated through retest behavior, close location, wick response, relative volume, freshness, and failure distance.
4. Visual Output
The script displays the active pocket, recovery rail, target rails, invalidation shelf, event labels, bar state color, and dashboard state.
🗺️ How to Read the Chart
Zones represent the active imbalance recovery pocket.
The recovery rail marks the key level price needs to reclaim or lose before the context improves.
Labels highlight new imbalance pockets, pocket tests, ready recovery events, invalidations, and expirations.
Colors:
• Teal = bullish recovery context
• Pink = bearish recovery context or failed context
• Gold = neutral or wait state
• Indigo = monitor or reference state
The panel summarizes imbalance state, recovery score, flow response, risk, and action.
🚦 Signals & States
• Bull Imbalance → a bullish high-volume displacement pocket has been mapped
• Bear Imbalance → a bearish high-volume displacement pocket has been mapped
• Pocket Test → price is interacting with the active imbalance pocket
• Ready Recovery → the recovery score has reached the required threshold
• Invalidated → price has moved beyond the active failure edge
• Expired → the imbalance pocket is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a new imbalance pocket is locked, when price tests the active pocket, when recovery reaches READY status, or when the context is invalidated.
Alerts are attention markers only. They are not trade instructions and do not guarantee future price behavior.
🧩 Confluence Logic
The context becomes stronger when high relative volume, large displacement, clean pocket retest, wick absorption, and recovery close align around the same pocket.
📊 When to Use
• After high-volume displacement candles
• During pullback and recovery phases
• Around breakout continuation attempts
• When studying absorption after aggressive movement
• On liquid symbols with reliable volume data
⚠️ When NOT to Use
• Very low-liquidity markets
• Symbols with unreliable volume data
• Extremely noisy sideways sessions
• News-driven spikes with unstable spreads
• Markets where chart volume does not represent meaningful participation
🎛️ Key Inputs
• Minimum Displacement Range → controls how large a candle must be relative to ATR
• Minimum Body Ratio → filters weak candles with too much wick noise
• Minimum Relative Volume → controls how much volume confirmation is required
• Minimum Ready Score → controls how strict the READY state is
• Projection Bars → controls how far active pockets and rails extend
• Visual Settings → control labels, zones, right-side tags, panel, font size, and bar colors
🖥️ Interface & Visual Design
The dashboard is designed as a quick decision-support panel, not a separate oscillator.
The chart uses a clear hierarchy: pocket first, recovery rail second, labels third, and targets only after recovery context becomes relevant.
The goal is to keep the chart premium, readable, and useful at first glance.
🧪 Practical Usage Workflow
1. Read the panel state
2. Locate the active imbalance pocket
3. Check whether price is testing or recovering the pocket
4. Review the recovery score and risk
5. Compare the output with broader market structure
🔍 Interpretation Guidelines
A READY state means the script has detected enough recovery behavior around the imbalance pocket to mark the context as worth attention.
It does not mean price must continue.
Use the output as structured context together with trend, liquidity, volatility, and higher-timeframe conditions.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a true order book, footprint, or bid/ask delta tool.
It is not an automated trading system.
It does not provide guaranteed signals.
It is not financial advice.
⚠️ Limitations & Transparency
The script uses chart-available data only.
Volume quality differs between markets, brokers, exchanges, and asset classes.
Timeframe changes may alter the appearance and timing of imbalance pockets.
Extreme volatility may produce rapid invalidation or repeated displacement events.
🧠 Market Context Notes
Order-flow style interpretation should always consider liquidity, volatility, structure, and session context.
A strong recovery pocket in a clean trend may carry more practical meaning than the same pocket inside a noisy range.
🧾 Use Case Examples
When price creates a high-volume bullish displacement candle and later retests the pocket, the script evaluates whether the retest shows enough absorption and recovery strength to become a READY context.
When price loses the recovery edge, the script marks invalidation rather than keeping the setup visually alive.
🧱 System Philosophy
AGPro Series tools are designed as decision-support engines.
The goal is not to simplify markets into blind signals, but to organize complex price behavior into readable structure, state, and risk context.
🔐 Non-Promise Statement
No script can provide certainty.
No signal guarantees continuation, reversal, or profit.
Outputs should be interpreted as analytical context only.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use this tool to study how volume displacement, imbalance pockets, absorption, and recovery behavior interact across different markets and timeframes.
Indicator
Supply Demand Flip Planner [AGPro Series]Supply Demand Flip Planner
🧠 Core Idea
Has an old supply or demand zone changed role and started acting as the opposite side of the market?
📌 Overview / What it does
Supply Demand Flip Planner is a role-change price action tool designed to identify when a prior supply zone turns into demand, or when a prior demand zone turns into supply.
The script detects pivot-based supply and demand zones, monitors breaks through those zones, maps the active flip zone, evaluates retest acceptance, and displays a structured 0-100 score. It also shows invalidation shelves, target rails, centered zone text, labels, and a compact AG Pro dashboard.
It does not predict future price movement, automate trades, or provide guaranteed buy/sell signals. It is a visual decision-support framework for reading supply-demand flip behavior.
🎯 Purpose & Design Philosophy
This script was built for traders who watch support/resistance role reversal but want a cleaner way to separate meaningful flips from ordinary breaks.
Many zones break and never matter again. Some zones break, retest, and start acting as the opposite side of the market. This planner focuses on that role-change moment.
The design supports a structured workflow: map supply and demand, wait for break, monitor retest, evaluate acceptance, then track invalidation.
⚡ Why This Script Is Different
Most supply and demand tools draw zones and leave interpretation fully manual.
This script does NOT simply flood the chart with historical zones.
Instead, it focuses on the active role-change zone, measures retest quality, scores acceptance, and presents the result through a clear READY / MONITOR / WAIT / INVALIDATED framework.
⚙️ Methodology
1. Context Detection
The script detects pivot-based supply and demand zones using configurable left/right pivot confirmation.
2. Reference Mapping
It maps source supply and demand shelves, then converts a broken zone into an active flip zone.
3. Reaction Evaluation
When price retests the flip zone, the script evaluates break strength, retest depth, wick response, body quality, source-zone quality, freshness, and relative volume.
4. Visual Output
The active flip zone is shown with centered text, invalidation shelf, target rails, right-side tags, labels, and an AG Pro panel.
🗺️ How to Read the Chart
Supply zones represent pivot-based resistance shelves.
Demand zones represent pivot-based support shelves.
Demand Flip means old supply has been broken and is being evaluated as new demand.
Supply Flip means old demand has been broken and is being evaluated as new supply.
READY FLIP labels mark retests that pass the selected acceptance score.
Invalidation shelf marks where the flip context weakens or fails.
The AG Pro panel summarizes Flip State, Acceptance, Retest, Failure Risk, and Action.
🚦 Signals & States
• DEMAND → pivot-based demand zone mapped.
• SUPPLY → pivot-based supply zone mapped.
• DEMAND FLIP → old supply was broken and is being watched as new demand.
• SUPPLY FLIP → old demand was broken and is being watched as new supply.
• FLIP RETEST → price is interacting with the active flip zone.
• READY FLIP → retest acceptance reached the required score threshold.
• INVALIDATED → the active flip lost its invalidation edge.
• READY → qualified flip acceptance is active.
• MONITOR → the flip zone is active or retesting.
• WAIT → no qualified flip acceptance is active.
🔔 Alerts Logic
Demand Flip Locked triggers when price breaks above a prior supply zone.
Supply Flip Locked triggers when price breaks below a prior demand zone.
Demand Flip Acceptance Ready triggers when a bullish flip retest reaches the score threshold.
Supply Flip Acceptance Ready triggers when a bearish flip retest reaches the score threshold.
Supply Demand Flip Retest triggers when price interacts with the active flip zone.
Supply Demand Flip Invalidated triggers when the flip loses its invalidation shelf.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest flip contexts appear when break strength, retest depth, wick response, close quality, source-zone quality, freshness, and relative volume align.
When a broken zone is retested cleanly and accepted from the opposite side, the score improves and the panel shifts toward a stronger action state.
📊 When to Use
• Support/resistance role reversal
• Breakout retests
• Trend continuation after zone breaks
• Failed range boundaries that become new reaction zones
• Markets with clear swing structure
⚠️ When NOT to Use
• Extremely noisy markets with weak pivot structure
• Very low liquidity symbols
• Markets with large spread or unreliable candles
• News spikes where zones break and fail too quickly
• Timeframes where pivot zones are too dense or too sparse
🎛️ Key Inputs
• Pivot Left / Right Bars → control how strict the source zone detection is.
• Zone Depth ATR → controls the thickness of supply and demand shelves.
• Break Buffer ATR → requires price to break beyond the source zone by a volatility-adjusted amount.
• Retest Window Bars → controls how long the flip remains relevant.
• Acceptance Buffer ATR → defines how much confirmation is required after retest.
• Invalidation Buffer ATR → controls the failure shelf beyond the flip zone.
• Minimum Ready Score → sets how strict READY labels should be.
• Visual Settings → control zones, labels, centered zone text, target rails, and right-side tags.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to make role-change structure readable without overwhelming the chart.
The active flip zone uses centered text so the purpose of the zone is immediately visible. Source zones are subtle, while READY labels and target rails stand out only when a valid acceptance context appears.
The panel gives a quick summary of the current flip state and risk context.
🧪 Practical Usage Workflow
1. Identify the latest supply and demand zones.
2. Wait for a zone to break and become a flip candidate.
3. Watch for retest interaction inside the flip zone.
4. Check the READY FLIP label and acceptance score.
5. Compare price with invalidation shelf and target rails.
6. Confirm broader trend, volatility, and liquidity before making decisions.
🔍 Interpretation Guidelines
A high acceptance score means the role-change reaction is cleaner according to the script's rules.
A pending retest means price has returned to the zone but has not yet shown enough acceptance.
A failed flip means price lost the invalidation edge and the role-change context should be treated as weakened.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
Pivot-based zones are confirmed after the selected right-side bars, so source zones appear after confirmation.
Different timeframes can create very different supply and demand structures.
High volatility can cause quick break-and-fail behavior around zones.
No rule-based script can fully account for news, liquidity shocks, or sudden market structure changes.
🧠 Market Context Notes
Supply-demand flips are a form of role reversal.
Old resistance can become new support after acceptance. Old support can become new resistance after acceptance.
The script is strongest when used with broader market structure, trend context, liquidity, and volatility analysis.
🧾 Use Case Examples
When price breaks above a supply zone, returns to the zone, and holds above it with clean reaction quality, the script may mark a Demand Flip acceptance.
When price breaks below a demand zone, retests it from below, and rejects cleanly, the script may mark a Supply Flip acceptance.
🧱 System Philosophy
Supply Demand Flip Planner follows the AG Pro Series approach: transform a common market concept into a structured decision map with context, score, risk reference, and clean visuals.
The goal is not to replace judgment. The goal is to make role-change analysis easier to read.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and responsible risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how supply zones, demand zones, breakout retests, and role-change acceptance behave across different market conditions.
Indicator
Fair Value Gap Reclaim Planner [AGPro Series]Fair Value Gap Reclaim Planner
🧠 Core Idea
Has price returned into a fair value gap and reclaimed the imbalance midpoint with enough quality?
📌 Overview / What it does
Fair Value Gap Reclaim Planner is an imbalance-focused price action tool built around three-candle fair value gap structure.
The script detects bullish and bearish FVG zones, tracks fill progress, maps the midpoint, evaluates reclaim quality, and displays a structured 0-100 readiness score. It also projects an active reclaim corridor, invalidation shelf, target rails, labels, and a clean AG Pro dashboard.
It does not predict future price movement, automate entries, or provide guaranteed signals. It is a visual framework for reading fair value gap reclaim behavior.
🎯 Purpose & Design Philosophy
This script was built for traders who study imbalance zones but want a cleaner way to separate meaningful reclaim behavior from ordinary gap interaction.
Fair value gaps can attract attention, but not every touch matters. The planner focuses on whether price fills, reacts, and reclaims a meaningful reference level inside the imbalance.
The design supports patient analysis: identify the zone, measure the fill, wait for reclaim, then evaluate context.
⚡ Why This Script Is Different
Most FVG tools highlight many imbalance zones and leave the user to interpret the rest manually.
This script does NOT flood the chart with every historical imbalance.
Instead, it focuses on the active FVG context, tracks fill progress, evaluates midpoint or full-edge reclaim, and converts the reaction into a clear score and action state.
⚙️ Methodology
1. Context Detection
The script detects bullish and bearish three-candle fair value gaps using a minimum ATR-based size filter.
2. Reference Mapping
It maps the FVG top, bottom, midpoint, fill area, and invalidation boundary.
3. Reaction Evaluation
When price interacts with the active FVG, the script evaluates fill progress, reclaim distance, wick response, body quality, relative volume, gap quality, and freshness.
4. Visual Output
Qualified reclaim events are shown with labels, projected zones, target rails, right-side level tags, and a compact panel.
🗺️ How to Read the Chart
FVG Zone shows the active imbalance area.
Midline marks the primary reclaim reference when Midline mode is selected.
Fill Progress shows how deeply price has returned into the imbalance.
READY FVG RECLAIM labels mark reclaim events that meet the selected score threshold.
Invalidation Shelf marks the area where the reclaim context weakens or fails.
The AG Pro panel summarizes Gap State, Reclaim Score, Fill Progress, Risk, and Action.
🚦 Signals & States
• BULL FVG → bullish fair value gap detected and locked.
• BEAR FVG → bearish fair value gap detected and locked.
• READY FVG RECLAIM → price reclaimed the selected FVG reference with enough quality.
• FVG TOUCH → price interacted with the active FVG zone.
• INVALIDATED → the active reclaim context lost the opposite FVG edge.
• READY → a qualified reclaim event is active.
• MONITOR → the active FVG is being tested or a reclaim context remains open.
• WAIT → no qualified reclaim event is active.
🔔 Alerts Logic
Bullish FVG Reclaim Ready triggers when price reclaims the selected FVG reference upward with enough score quality.
Bearish FVG Reclaim Ready triggers when price reclaims the selected FVG reference downward with enough score quality.
FVG Touch triggers when price interacts with the active imbalance zone.
FVG Reclaim Invalidated triggers when the active reclaim context loses the opposite FVG edge.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest reclaim contexts appear when fill progress, wick response, close quality, relative volume, gap size, and freshness align.
When price returns into the imbalance, respects the zone, and reclaims the midpoint or edge with clean reaction quality, the score improves.
📊 When to Use
• Markets with visible imbalance behavior
• Breakout pullbacks into fair value gaps
• Trend continuation reviews
• Reclaim attempts after partial FVG fills
• Intraday or swing contexts where FVG zones remain meaningful
⚠️ When NOT to Use
• Very low liquidity markets
• Extremely noisy or illiquid symbols
• Markets with unreliable candles or volume
• Wide-spread conditions where small gaps are misleading
• News spikes where imbalance zones can be invalidated quickly
🎛️ Key Inputs
• Minimum FVG Size ATR → filters out tiny imbalance zones.
• Maximum FVG Age Bars → controls how long an FVG can remain active.
• Reclaim Reference → chooses midpoint reclaim or full-edge reclaim.
• Touch Lookback Bars → controls how recent the FVG interaction must be.
• Invalidation Buffer ATR → controls the risk shelf beyond the FVG edge.
• Minimum Ready Score → sets how strict READY events should be.
• Target Rails → control projected T1 and T2 levels.
• Label Settings → control label density, size, and spacing.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to show the active imbalance context without filling the chart with excessive historical zones.
The FVG zone, midline, fill meter, invalidation shelf, target rails, and panel are visually separated so the chart remains readable.
The goal is a premium first-glance layout: zone first, reclaim second, action state third.
🧪 Practical Usage Workflow
1. Check the panel for active Gap State.
2. Locate the FVG zone and midpoint.
3. Watch how deeply price fills the imbalance.
4. Evaluate READY FVG RECLAIM labels and score quality.
5. Compare price with the invalidation shelf and target rails.
6. Confirm broader structure before making decisions.
🔍 Interpretation Guidelines
A high reclaim score means the reaction is cleaner according to the script's rules.
A lower score means the reclaim may be weaker, late, noisy, or incomplete.
Fill progress is not a signal by itself. It becomes more meaningful when combined with reclaim quality and broader market context.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
Fair value gap interpretation can vary across markets, sessions, and timeframes.
Some markets create many small gaps that may not carry meaningful context.
Volatility changes can make an active FVG less relevant over time.
No rule-based script can fully account for news, liquidity shocks, or sudden market structure shifts.
🧠 Market Context Notes
Fair value gaps often represent fast price displacement and temporary imbalance.
The reclaim of a midpoint or edge can help traders study whether the market is accepting or rejecting the imbalance area.
The script works best when combined with structure, liquidity, volatility, and trend context.
🧾 Use Case Examples
When a bullish FVG forms after displacement, price returns into the zone, partially fills it, and then reclaims the midpoint, the script may mark a bullish reclaim context.
When a bearish FVG forms after downside displacement, price retraces into the imbalance and then rejects back below the midpoint, the script may mark a bearish reclaim context.
🧱 System Philosophy
Fair Value Gap Reclaim Planner follows the AG Pro Series approach: turn a popular market concept into a structured decision map with context, score, risk reference, and clean visuals.
It is designed to support judgment, not replace it.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and responsible risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how fair value gap fills, midpoint reclaims, and imbalance reactions behave across different market conditions.
Indicator
VWAP Pullback Reclaim Planner [AGPro Series]VWAP Pullback Reclaim Planner
🧠 Core Idea
Has price pulled back into VWAP and reclaimed it with enough quality to deserve attention?
📌 Overview / What it does
VWAP Pullback Reclaim Planner is a volume-weighted price action tool designed to evaluate pullbacks around VWAP and highlight reclaim conditions with a structured readiness score.
The script maps VWAP, a pullback pocket, reclaim corridors, invalidation shelves, target rails, labels, and a compact AG Pro dashboard. It focuses on whether price has moved away from VWAP, reacted, and returned through the reference with enough quality.
It does not predict future price movement, automate trading, or provide buy/sell commands. It is a visual decision-support framework for reading VWAP reclaim context.
🎯 Purpose & Design Philosophy
This script was built for traders who use VWAP as a live market reference but need more structure than a single line on the chart.
Many VWAP tools show the average price only. This planner adds context: pullback depth, reclaim quality, reaction strength, room, invalidation, and next-action state.
The design philosophy is simple: make VWAP reclaim situations easier to read without turning them into mechanical signals.
⚡ Why This Script Is Different
Most tools focus on plotting VWAP as a static benchmark.
This script does NOT treat every VWAP touch as meaningful.
Instead, it waits for a pullback, checks reclaim behavior, scores the reaction, and then presents the result through zones, labels, target rails, and a clear READY / MONITOR / WAIT / INVALIDATED state.
⚙️ Methodology
1. Context Detection
The script builds an anchored VWAP from the selected anchor mode and monitors price distance from that volume-weighted reference.
2. Reference Mapping
It creates a VWAP pullback pocket using ATR depth so the zone adapts to current volatility.
3. Reaction Evaluation
When price reclaims VWAP after a pullback, the script evaluates close distance, wick response, body quality, relative volume, VWAP slope alignment, and freshness.
4. Visual Output
Qualified events are shown with reclaim labels, a reclaim corridor, invalidation shelf, target rails, right-side tags, and a panel summary.
🗺️ How to Read the Chart
VWAP line shows the active volume-weighted reference.
The shaded pocket around VWAP marks the pullback area where reaction quality is evaluated.
READY RECLAIM labels highlight reclaim events that pass the selected score threshold.
The reclaim corridor shows the active continuation area after a valid reclaim.
The invalidation shelf marks where the reclaim context weakens.
The AG Pro panel summarizes VWAP State, Reclaim Score, Pullback Quality, Room, and Action.
🚦 Signals & States
• READY RECLAIM → price reclaimed VWAP after a pullback with enough quality.
• VWAP PULLBACK → price is inside or beyond the pullback pocket and may deserve monitoring.
• INVALIDATED → an active reclaim context lost its invalidation shelf.
• READY → a qualified reclaim event is active.
• MONITOR → a reclaim or pullback context is active but not a fresh ready event.
• WAIT → no actionable VWAP reclaim context is active.
• BLOCKED → VWAP or volatility context is not valid enough for evaluation.
🔔 Alerts Logic
Bullish VWAP Reclaim Ready triggers when price reclaims VWAP upward after a valid pullback and score threshold is met.
Bearish VWAP Reclaim Ready triggers when price reclaims VWAP downward after a valid pullback and score threshold is met.
VWAP Pullback Watch triggers when price enters the pullback evaluation area.
VWAP Reclaim Invalidated triggers when an active reclaim loses its invalidation shelf.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest contexts appear when pullback freshness, VWAP reclaim, wick response, close strength, relative volume, and VWAP slope alignment support the same direction.
When these factors align, the score improves and the panel shifts toward a clearer action state.
📊 When to Use
• Intraday sessions where VWAP is actively watched
• Trend pullbacks around a volume-weighted mean
• Post-move reclaim attempts after sharp reactions
• Markets with enough liquidity for VWAP to be meaningful
• Breakout continuation and mean-reclaim review
⚠️ When NOT to Use
• Very low liquidity markets
• Extremely noisy symbols with unreliable volume
• Markets with wide spread or thin candles
• News-driven spikes where VWAP context can change too quickly
• Symbols where volume data is missing or distorted
🎛️ Key Inputs
• Anchor Mode → controls whether VWAP resets by session, week, or month.
• Pullback Pocket Depth → changes how wide the VWAP pullback area becomes.
• Reclaim Buffer → requires price to reclaim beyond VWAP by a volatility-adjusted amount.
• Invalidation Shelf → controls the risk shelf after reclaim.
• Minimum Ready Score → sets how strict READY labels should be.
• Target Rails → control the projected T1 and T2 reference levels.
• Label Settings → control density, size, spacing, and visual clarity.
• Panel Settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The interface is designed to keep the chart readable while still feeling premium and informative.
The panel provides the current state at a glance. Labels mark important reclaim events. Zones and rails show context without overwhelming the candles.
The visual hierarchy is built around VWAP first, reclaim quality second, and action state third.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check whether price is near the VWAP pullback pocket.
3. Look for READY RECLAIM labels and score quality.
4. Compare price with the reclaim corridor, invalidation shelf, and target rails.
5. Confirm the broader market structure before making any decision.
🔍 Interpretation Guidelines
A high score means the reclaim structure is cleaner according to the script's rules.
A low or missing score means the reclaim context is incomplete, weak, or not currently active.
The script is best interpreted with trend, liquidity, volatility, and higher-timeframe structure.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a financial advisor.
It is not an automated trading system.
It does not guarantee entries, exits, profits, or outcomes.
⚠️ Limitations & Transparency
VWAP behavior can differ across symbols, sessions, and timeframes.
Volume quality matters. If volume data is unreliable, VWAP interpretation may weaken.
Fast volatility expansion can invalidate reclaim context quickly.
No rule-based tool can fully account for market news, liquidity shocks, or sudden structural changes.
🧠 Market Context Notes
VWAP often acts as a live reference for institutional positioning, intraday fairness, and reaction quality.
However, VWAP should not be read alone. The best use comes from combining VWAP reclaim structure with liquidity, trend, volatility, and support/resistance context.
🧾 Use Case Examples
When price pulls below VWAP, rejects lower prices, and reclaims VWAP with strong close quality, the script may mark a bullish reclaim context.
When price pushes above VWAP, fails to hold, and reclaims downward with strong reaction quality, the script may mark a bearish reclaim context.
🧱 System Philosophy
VWAP Pullback Reclaim Planner follows the AG Pro Series approach: convert a market concept into a structured decision map with context, score, risk reference, and visual clarity.
The goal is not to replace judgment. The goal is to make judgment easier.
🔐 Non-Promise Statement
No script can provide certainty.
No signal should be treated as guaranteed.
Outputs should always be interpreted with independent analysis and risk control.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
This script is designed to help traders study how VWAP pullbacks, reclaim attempts, and reaction quality behave across different market conditions.
Indicator
