Support & Resistance Zones [HexaTrades]
This indicator automatically finds the price levels where the market has turned around before the places where buyers stepped in (support) and where sellers took over (resistance) and draws them as clean rectangular zones on your chart.
Instead of a thin line, each level is drawn as a zone with real thickness, because support and resistance are never one exact price; they are areas where price reacts. The zones update live, extend forward as long as they are valid, and turn into light "ghost" boxes once price finally breaks through them, so you always keep the full picture of the market's history.
Bitcoin 4h: the indicator marking support and resistance zones
How it works
- Finds swing points. A swing high is a candle whose high is higher than the 10 candles on each side of it (the "Swing Length" setting). A swing low is the same idea upside down. These are the exact spots where the market turned.
- Builds a zone from the candle. The zone covers the candle's wick from the extreme tip to the candle body. That wick is where orders actually pushed price back, so it becomes the zone.
- Keeps zone size sensible. Very small wicks get padded to a minimum height, and no zone can grow taller than a maximum height (both measured in ATR, so they adapt automatically to each market's volatility).
- Merges duplicate levels. If a new swing forms at a level that already has a zone, the two are combined into one box instead of stacking clutter on your chart.
- Watches for breaks. When a candle closes beyond a zone, the zone is "broken." what happens next is up to you (see below).
What happens after a zone breaks?
The indicator provides three different zone-management options.
Keep As Past Zone: The broken zone stops extending and remains visible as a faded historical zone. This makes it easier to review how price behaved around previous levels.
Flip Support/Resistance: A broken resistance zone becomes support, while a broken support zone becomes resistance.
This is useful for studying the common market concept of role reversal, where old resistance may act as new support and old support may act as new resistance.
Delete Zone: The zone is completely removed after it breaks. This option is useful for traders who prefer a cleaner chart showing only active zones.
Optional volume filter:
Volume-Confirmed Zones Only can be enabled to filter out lower-volume swing points.
When enabled, the volume of the swing candle must be higher than: Average Volume × Volume Multiplier
For example, with a Volume Multiplier of 1.2, the swing candle’s volume must be greater than 120% of its average volume.
The volume filter is automatically ignored when volume data is unavailable. Volume quality can vary between markets, exchanges and brokers.
Indicator settings
- Swing Length: Controls how significant a swing must be. Lower values create more zones, while higher values create fewer but potentially more significant zones.
- Maximum Zones: Limits the number of active zones displayed. When the limit is exceeded, the oldest active zone is removed.
- ATR Length: Sets the calculation period used to measure volatility.
- Minimum Zone Height: Sets the minimum zone thickness as a multiple of ATR.
- Maximum Zone Height: Prevents zones from becoming excessively wide.
- Merge Overlapping Zones: Combines overlapping or nearby active zones.
- Merge Distance: Controls the ATR-based distance used when deciding whether zones should be merged.
- Maximum Past Zones: Limits how many broken historical zones remain on the chart.
- Past Zone Transparency: Controls how clearly broken zones are displayed.
Alerts
- Built-in alerts
- Zone Touched — price entered a support or resistance zone.
- Resistance Broken — a candle broke above a resistance zone.
- Support Broken — a candle broke a support zone below.
- Set them up from PulseWire's alert dialog: Create Alert → Condition → S/R Zones.
How to use it in trading
🔶Bounce trades: when price falls into a support zone and prints a rejection candle, that's a long setup with a stop just below the zone.
A blue support zone represents an area where buyers previously entered the market.
When price returns to support:
- Wait for price to enter or test the zone.
- Look for evidence that buyers are responding.
- Consider an entry only after confirmation.
- Place the stop beyond the opposite side of the zone, with an appropriate buffer.
- Use the next resistance zone as a possible target.
Possible bullish confirmation includes:
- A candle rejecting the lower part of the zone.
- A long lower wick followed by a bullish close.
- A bullish engulfing candle.
- Price closing back above the support zone.
- Increasing volume during the reaction.
- A higher low forming near the zone.
A support touch by itself is not a long signal. Price can move directly through the zone, especially during a strong downtrend.
Example image below:
🔶Rejection from resistance
A pink resistance zone represents an area where sellers previously entered the market.
When price reaches resistance:
- Wait for price to test the zone.
- Look for signs of selling pressure.
- Consider an entry only after bearish confirmation.
- Place the stop beyond the upper edge of the zone, with a suitable buffer.
- Use the next support zone below as a possible target.
Possible bearish confirmation includes:
- A long upper wick inside the resistance zone.
- A bearish engulfing candle.
- Price entering the zone and closing back below it.
- A lower high forming near resistance.
- Increasing selling volume during the rejection.
A resistance touch alone is not a short signal. Strong bullish momentum can break through resistance without producing a meaningful reversal.
Example image:
🔶Trading a breakout
A breakout occurs when price moves beyond an active zone.
- A break above resistance may indicate increasing bullish strength.
- A break below support may indicate increasing bearish strength.
For more conservative confirmation, select Close under Break Confirmation. In this mode, a resistance zone breaks only after a candle closes above it, while a support zone breaks only after a candle closes below it.
The Wick option reacts as soon as price trades beyond the zone. It responds faster but is more sensitive to temporary spikes and false breakouts.
Before considering a breakout trade, traders may look for:
- A strong candle closing beyond the zone.
- A candle body that closes clearly outside the zone.
- Higher-than-average volume.
- Momentum in the breakout direction.
- Alignment with the broader market trend.
- A successful retest of the broken zone.
🔶Trading a role reversal
Support and resistance can sometimes exchange roles after a breakout.
-Broken resistance may later act as support.
- Broken support may later act as resistance.
Select Flip Support/Resistance under the When Broken setting to display this behaviour automatically.
For example, after price closes above a pink resistance zone, the indicator converts that area into a blue support zone. If price later returns to it, traders can watch for a bullish reaction.
Similarly, when price breaks below blue support, the indicator converts the zone into pink resistance. A later retest may provide an area to watch for bearish confirmation.
Role reversal is a commonly observed price-action concept, but it does not occur successfully after every breakout. Wait for confirmation instead of entering only because price has returned to a flipped zone.
🔶Using zones for targets and stops
Zones can also help organise trade management.
For a long setup:
- A stop may be placed below the support zone.
- The next resistance zone may be used as an initial target.
- A higher resistance zone may be considered as a secondary target if momentum remains strong.
For a short setup:
- A stop may be placed above the resistance zone.
- The next support zone may be used as an initial target.
- A lower support zone may be considered as a secondary target.
Avoid placing the stop exactly on the edge of a zone. Price may briefly move beyond the boundary before reacting. The appropriate buffer depends on the symbol, timeframe, volatility and the trader’s risk plan.
Always calculate the potential risk and reward before entering a trade. A visible zone does not automatically make a setup worth taking.
🔶 Using multiple timeframes
Higher-timeframe zones can provide broader market context, while lower timeframes can help refine entries.
A simple process is:
- Identify important support and resistance on a higher timeframe.
- Determine whether the broader structure is bullish, bearish or ranging.
- Move to the preferred trading timeframe.
- Wait for price to reach a relevant zone.
- Use candle structure, volume or momentum for confirmation.
Higher timeframes generally produce fewer but more widely watched zones. Lower timeframes produce more zones and may contain more market noise.
Support and Resistance Zones help traders identify and manage important price areas with less chart clutter. Its volatility-based sizing, zone merging, break confirmation, role reversal, and alerts make it suitable for different markets and timeframes. Use the zones as areas to watch—not automatic trade signals and always combine them with price confirmation, broader market structure and proper risk management.
We would love to hear your suggestions. If you have ideas for new features, indicators, analytics, or improvements, please share your feedback. Your input helps guide future updates and improve the indicator for all traders.
Wedge pattern detector indicator is for educational and analytical purposes only. It is not financial advice. Trading involves risk. Always use proper risk management and combine this indicator with your own analysis before taking any trade.
Indicator
Supply & Demand Zones - Zone Forge [AFD]
Two zones on your chart. One came from a four-bar coil that price left in a single decisive candle. The other took twenty bars to go nowhere and slid out the bottom. Your indicator drew them identically.
That difference is measurable at the moment each zone forms - how tight the base was, how hard price left it - and it is measurable from the same two numbers the tool already had to compute in order to find the zone at all. Almost every zone tool computes them on the way past and throws them away.
Zone Forge keeps them. Every zone is scored on how it was constructed, and the score is painted rather than printed: a well-built zone carries more glow and deeper fill, a marginal one recedes into the background. No letter, no number, nothing to decode. The chart sorts itself.
Why it matters
A supply or demand zone is a fussy construction pretending to be a simple one. It needs a short, tight cluster of bars - the base - that price then left decisively in one direction. Both halves are measurable, and the ratio between them separates a coil that broke from a range that drifted. This describes how an area formed, and says nothing about what price does next.
At a glance
Four patterns, each switchable - rally-base-drop and drop-base-drop become supply; drop-base-rally and rally-base-rally become demand. Turn off the ones you do not trade.
A grade on every zone - built from two ratios the engine already computes, tiered Strong, Standard and Weak, and shown as vividness rather than as a label.
A one-way lifecycle - Fresh, Tested, Broken. A broken zone never returns to fresh, and a tested zone steps further back with each additional test.
Detection in one click - Scalp, Intraday or Swing set base length, tightness and departure strength together. Custom exposes all three.
Measured against your chart's own volatility - base height and departure distance are both in ATR(14) units, so one setting means the same thing on a $4 stock and a $400 one.
Nine colour themes - Signature, Neon, Muted, Mono, Terminal, Midnight, Ocean, Ember, and Paper for light charts, plus Custom. Three appearance presets over the top - Signature, Clean and Minimal - plus a Custom that leaves every control acting on its own.
Four alert conditions - new demand zone, new supply zone, zone tested, zone broken, as four separate entries in the alert dialog rather than one.
Three Data Window values for screening - distance to the nearest demand zone, distance to the nearest supply zone, and whether price is inside one.
How a zone is built
A base is a run of bars whose whole height fits inside Base tightness x ATR(14). A departure is a bar that CLOSES beyond that base by at least Departure strength x ATR(14) - the close, never the high or the low, so a spike that closes back inside draws nothing.
Both halves must be complete. A zone is created from a finished base and a finished departure, and appears on the bar that closes the departure, not before.
Two rules that change what you see:
A tight run LONGER than Base max length is rejected as a range. It is not trimmed to its last few bars and admitted anyway.
The departure is measured against the PREVIOUS bar's ATR, so the departure bar's own range cannot inflate the threshold it has to clear.
The grade, stated plainly
grade score = (departure distance / required distance) / max(base height / height limit, 0.50)
A zone that cleared the departure requirement by 3x off a base using half its allowed height scores well above one that cleared it by 1.1x off a base that used all of it. Only just qualifying on both counts scores 1.0x.
Weak, Standard and Strong are fixed thresholds on that score, and the tier is decided on the bar that creates the zone.
The score is computed once and is never recomputed. A zone already on your chart does not restyle itself later.
Grade emphasis sets how far apart the three tiers LOOK, from nearly identical to a wide visual split. It changes appearance only, never which tier a zone is in.
The tiers describe construction. They are not a ranking of what is likely to happen at a zone, and no tier is presented as the one to trade.
The lifecycle
Fresh - price has not come back yet. Brightest.
Tested - price traded into the zone and it held. The fill and glow step back, and each further test steps them back again up to a fixed limit, so an area that has been worked repeatedly recedes on its own rather than vanishing.
Broken - price closed through it. Hidden by default, because showing them roughly triples what is on the chart.
You choose what counts as each. Break rule is close-through or wick-through; Test rule is wick-touch or close-inside. Break beats test on the same bar, and the lifecycle only ever runs one way - a broken zone never becomes fresh again.
Flip broken zones, off by default, draws a fresh zone of the OPPOSITE type at the same levels when a zone breaks. The broken zone stays broken - this creates a new zone rather than reversing an old one, so nothing already on your chart changes what it claims to be. One generation only.
How it differs from a standard zone tool
The grade is a consequence of the construction, not a bolt-on - a swing-pivot band inflated by a fixed ATR width has no tightness to measure, and a fair-value gap has no base at all. Only something that finds a consolidation and THEN measures the move away from it has the two numbers to divide.
Strength is the visual language - the ranking is carried by glow and fill depth, so the chart is read at a glance instead of decoded. No letter appears on the box unless you ask for one.
The chart is kept bounded on purpose - a cap per side, a maximum age, broken zones hidden, and an overlap rule that will not admit a new zone sitting on top of a live one.
A theme system, not a colour picker - nine curated palettes, one of them built for a light chart, and three appearance presets over the top.
Nothing about the grade is hidden - the score is one division, the two thresholds it divides are the same ones detection already applied, and every constant is a named value in source you can read. A trust signal, not the pitch: what you are here for is the zones.
The visuals
Layered glow, not a flat rectangle - concentric halo boxes off a single Glow intensity control, with a floor so no layer is ever invisible. Glow spread sets how far the halo reaches.
Fill, border and edges are independent - each carries its own colour, width and style, and each can be switched off. Border off leaves the fill and the glow; fill off leaves an outline.
Emphasise nearest zone - thickens the border of the zone closest to price on each side.
50% line - the midpoint mitigation level, off by default, with its own colour and style.
Labels - Type, Type + age, Type + grade, Type + touches or Age; four positions, four sizes, a bar offset; worded Supply/Demand, the full pattern name or the trade shorthand. Every label carries a hover breakdown: pattern, span, state, age and grade.
Zone count table - a small optional panel counting what is on the chart.
Master opacity - fades every colour together in one control, without touching any individual setting.
Alerts
New demand zone
New supply zone
Zone tested
Zone broken
Create these from PulseWire's alert dialog. How often an alert re-fires while its condition holds is set in that dialog, not in the script. A running alert keeps the inputs, symbol and timeframe it was created with - recreate it after changing any of them.
How to use it
Pick a detection style first - Scalp, Intraday or Swing. It is the only setting that changes WHAT gets found; everything else changes how what was found looks.
Works best on a 5-minute chart or lower - a zone needs a completed base and a completed departure to print, and that pattern completes far more often per session on a fast chart than a slow one, so a 5-minute-or-lower timeframe gives you more zones to read.
Read the fresh zones first - they are the brightest, and they are the areas price has not returned to.
Read the grade as build quality - a Strong zone came from a tight base and a decisive departure, a Weak one only just cleared both tests. Both are drawn, because knowing which is which is the point.
Watch a zone dim - each test steps it further back. A zone tested three times looks like what it is.
Set the look once - Preset gives you the vivid default, a clean one and a minimal one in a click, or Custom to set everything yourself; Colour theme gives nine palettes; Master opacity fades the lot. Then leave it alone.
Hover anything unclear - all 63 inputs carry a tooltip, and every zone label carries a breakdown.
What it deliberately does not do
It reads the open, high, low, close and volume of the chart you have open, and nothing else. There are no request.security() calls, no other symbol, no higher-timeframe import, and no options or order-book data of any kind.
So it does not know about order flow, dealer positioning, or where anyone's orders actually are. Supply and demand here name where a price move ORIGINATED. They do not name a measured book, and the words that would imply otherwise are kept out of every string this script ships.
It draws no entries, exits, targets or arrows, and makes no accuracy, reliability, profitability, probability or future-result claim of any kind. The grade describes an area built from bars that have already printed: a construction score establishes neither future direction nor the quality of any trade. Educational chart context only - not financial advice.
Data, timeframes and what to check yourself
Zones are created from confirmed bars only - a completed base and a completed departure. Once created, a zone's geometry does not move: its top, bottom and left edge are fixed, and only its lifecycle state changes, one way, on closed bars. Confirm it with the bar-replay tool on your own symbol and timeframe before relying on it - a description of mechanism is not that check, and nothing here claims to be.
The three Data Window values read the live close - the two distances and the inside-zone flag. They create, test, break and prune nothing.
The zone count is bounded by Pine's drawing limits - the source declares budgets of 500 boxes, 500 lines and 100 labels, and every glow layer, edge line and label spends from them. Max zones per side and Max zone age are the controls that keep you inside.
Standard time-based candles - on Heikin Ashi, Renko or Range the engine measures those synthetic values rather than traded prices, so the bases it finds are not the bases on your price chart.
Base tightness is not a strictness dial - the zone count peaks in the middle of its range and falls away at both ends, which is why the range stops where it does. Loosening it past the peak draws FEWER zones, not more.
Detection needs history - ATR(14) must exist before anything can be measured against it, so the opening bars of a chart produce nothing.
Originality and credit
Supply and demand zones are old ground. What is new is that the construction is measured, and the measurement is what you see: base tightness and departure distance resolved into one score, that score frozen on the bar that creates the zone, and the ranking expressed as glow and fill depth rather than as a label to decode.
Open source under the Mozilla Public License 2.0. (c) Auction Foundry.
Indicator
Support and Resistance Zones, Key Levels & Hold Rate [LunqFX]Support and resistance indicators all draw the same picture: a set of key levels and SR zones detected from swing pivots, every one of them looking as important as the next. Five price levels on the chart and no way to tell which one the market actually respects — so you place the order at whichever support or resistance price bounced off last, and call it analysis.
This support and resistance indicator keeps score. Each auto-detected SR zone carries the number of times it has been tested and how many of those tests it held, printed on the level itself:
1.15370 · 71% · 5 of 7 1.14344 · 50% · 1 of 2 1.13763 · 67% · 2 of 3
A key level that has held five of seven tests and one that has held one of six are not the same object, and until that number is on the chart you are trading them as if they were.
Included: automatic support and resistance zone detection from confirmed pivots, a hold-rate record on every level, strength-weighted drawing, a dashboard showing the nearest support and resistance either side of price, and optional buy and sell signals with a trend filter and alerts.
❶ HOW THE SUPPORT AND RESISTANCE ZONES ARE BUILT
Swing points come from confirmed pivots, so a level only exists once the bars on both sides of it have closed — nothing appears and then vanishes. Pivots that land close to each other are merged into a single zone rather than stacked as near-duplicate lines, with the merge distance measured in ATR so it adapts to the instrument.
A zone widens as new pivots join it, but only up to a ceiling. Past that it re-centres on the pivot that just touched it. Without that rule a level slowly swallows everything around it and turns into a band, and the count then measures touches of a band instead of touches of a price.
❷ THE HOLD RATE — what no other support and resistance tool shows
A test opens when price trades into the zone. It resolves on a CLOSED bar, one of two ways:
▸ HELD — price closed back out the side it came from, clear of the zone by a fraction of ATR. The margin matters: without it, a close one tick beyond the edge counts as a rejection, which is how level indicators manufacture events out of noise. ▸ BROKEN — price closed through to the other side.
Nothing is counted while a test is still open. And a fresh test cannot begin until the previous one has had room to breathe, because price chopping inside a zone for a week is one consolidation, not twenty separate tests of the level.
Samples of fewer than four tests are marked with a tilde. Two tests producing "100%" is noise, and the chart says so rather than letting the number stand.
❸ LEVEL STRENGTH YOU CAN SEE
Fill density, border thickness and the halo behind each zone all scale with how often the level has been tested, and levels holding above 60% are drawn in a brighter shade. The chart ranks its own levels — the strongest one is the one that looks strongest, with no arithmetic required from you.
❹ THE DASHBOARD — nearest support and resistance
The nearest level above and the nearest level below, each with its price and its record. When there is no tracked level on one side the panel says exactly that, rather than printing a dash that reads like a fault.
❺ BUY AND SELL SIGNALS — built in, switched off
The indicator includes buy and sell signals: a buy label when a support test holds, a sell label when resistance holds. Turn them on in the Signals section — the switch is the first setting in the group, and every alert works from them.
They ship switched OFF, and the reason is worth stating plainly. A rejection at a support or resistance level is a fact. What price does afterwards is not. A level also tends to weaken with each test as the orders behind it are consumed, so "this level held four times" is not evidence that it will hold a fifth — if anything the reverse. Any indicator that hands you an arrow on every bounce is selling you that assumption without saying so.
When switched on, a signal has to clear six filters before it prints: the level must have been tested enough times to have a record, it must hold more often than it breaks, the rejection must close clear of the zone by a fraction of ATR, price must still be near the level, the trend must agree with the direction, and both the chart as a whole and that particular level must have been quiet since the last one. Set that way they are rare. Treat them as a prompt to look, not as a call to act.
HOW TO USE IT
1 — Choose where to place a resting order. Between two levels the same distance away, the one with the better record is the better limit.
2 — Choose where to expect a break. A level holding one test in six is telling you something too: price is likely to go through it, which makes it a poor place to fade and a reasonable place to trade a breakout.
3 — Place stops behind proven levels. A stop tucked behind a level that has held five of seven has a structural reason to be there.
4 — Read the whole set at once. This is the reading most traders never get. If every level on the chart is showing 30–40%, the market is not respecting levels at all right now — it is trending or reacting to news, and level trading is the wrong approach for the session. When most levels sit at 70%+, the market is rotating and levels are worth trading. That judgement usually takes weeks of screen time; here it is on the chart.
HOW IT WORKS
Pivots of your chosen length define candidate levels. Each new pivot either joins the nearest existing zone within the merge distance or opens a new one; zones are capped in width and the oldest is dropped once the limit is reached. Every zone tracks four numbers: tests, holds, the bar its last test resolved on, and the bar it last signalled on. Tests resolve on closed bars only, with a rejection margin in ATR and a minimum gap between tests. The hold rate is simply holds divided by tests, and the drawing weight is derived from the test count.
Works on any symbol and timeframe. On daily charts and above, leave the minimum test count at one — a level there rarely gets a second test before it matters. On fast intraday charts raise it, since levels are tested often.
SETTINGS
▸ Levels — pivot length, how many levels are kept, how far back they draw, merge distance, zone thickness, maximum width, minimum tests to draw, and the gap between tests. ▸ Signals — off by default; prior holds required, minimum tests before a level may speak, minimum hold rate, cooldowns, distance from price and rejection strength. ▸ Trend Filter — direction requires both price position and the slope of the average, so a range satisfies neither side. ▸ Visuals — extension, labels, candle colouring, dashboard position.
ALERTS — buy signal, sell signal, and any signal. All fire on closed bars only.
NON-REPAINTING — levels are built from confirmed pivots and every test resolves on a closed bar. A record that has printed never changes retroactively, and a level that has appeared never disappears from history.
WHY THESE PARTS ARE ONE SCRIPT
The levels, the record and the visual weight describe one object. Detection alone gives you lines with no way to rank them. The record alone has nothing to attach itself to. The weighting exists only so the record can be read at a glance instead of counted. Take any one away and the other two stop being useful, which is why they ship together rather than as three indicators.
This indicator is an educational market-analysis tool, not financial advice. The hold rate describes what has already happened at a level on the loaded chart; it does not predict what will happen next. Always confirm with your own analysis and manage your risk. Indicator
Indicator
Bollinger Sweeps & Dynamic Trendline Matrix PROBollinger Sweeps & Dynamic Trendline Matrix PRO
Bollinger Sweeps & Dynamic Trendline Matrix PRO is a modern, high definition technical analysis indicator optimized specifically for clean charting and high visibility across both light and dark themes. It seamlessly combines customized Bollinger Band volatility tracking, liquidity sweep detection, high confluence trendlines, market structure analysis, and outer neon glowing candlesticks.
Key Features Overview
1. Optimized Bollinger Bands Engine
Features lightweight, low opacity Bollinger Bands with fully customizable length, multiplier, line styles (Solid, Dashed, Dotted), line thickness, and transparency controls.
2. Bollinger Liquidity Sweeps (ITH & ITL Badges)
Identifies liquidity sweep points where price action pierces or touches the outer bands and sharply reverses, marking valid Intermediate Term Highs (ITH) and Intermediate Term Lows (ITL).
3. High Confluence Auto Trendlines
Draws precise trendlines anchored strictly across high confluence swing points, avoiding clutter. Includes full customization for line style, thickness, and color.
4. True Outer Neon Glowing Candlesticks
Uses multi layered rendering to project an outer glowing halo around price candlesticks, making trend direction pop cleanly on white or dark backgrounds.
5. Clean Split Line Market Structure Signals
Detects Break of Structure (BOS) and Change of Character (CHoCH) levels. Structure lines split cleanly around centered text labels with an automatic gap for maximum chart legibility.
6. Triangle Pattern Consolidation Engine
Detects volatility squeezes and marks triangle breakout and breakdown confirmations right as volatility expands.
Settings Overview
Bollinger Bands Settings
- Show Bollinger Bands Engine: Toggle display of bands.
- Band Transparency & Thickness: Adjust opacity and line width.
Bollinger Sweep Settings
- Show BB Sweep Pivots: Toggle ITH and ITL liquidity badges.
Smart Trendline Settings
- Show Smart Trendlines: Toggle trendline overlays.
- Custom Styles: Adjust line style (Solid, Dashed, Dotted), thickness, and colors.
Market Structure Settings
- Show BOS & CHoCH Signals: Toggle structure lines and labels.
Outer Glow Settings
- Enable Outer Glowing Theme: Toggle multi layered candlestick halo effects.
Disclaimer
This script is built strictly for educational, analytical, and charting enhancement purposes. It does not provide financial advice, automated trade signals, or guaranteed results. Always practice strict risk management. Indicator
Trend Angle Momentum [MarkitTick]💡 This tool measures market structure not just as a sequence of highs and lows, but as a rate of directional change. It detects confirmed swing pivots and then calculates the geometric angle of the trendline connecting each pivot to the one before it, translating pure price action into a single, intuitive metric: degrees of trend steepness. Instead of asking traders to infer momentum from candle shape or oscillator divergence, it hands them a number — the actual angle of ascent or descent between structural turning points — along with an optional smoothed reading of how that angle is evolving over time.
✨ Originality and Utility
Most swing-detection tools stop at marking the high or low. This script goes a step further by quantifying the relationship between consecutive swings using trigonometry. Each swing-to-swing move is converted into a percentage price change, which is then run through an arctangent function to produce a true geometric angle in degrees, independent of the instrument's absolute price scale. A move on a $2 stock and a move on a $2,000 stock that share the same percentage steepness will report the same angle, making the readings comparable across symbols and timeframes in a way that raw price-based slope calculations cannot achieve.
The utility here is twofold. First, the angle itself acts as a quantified momentum proxy: a shallow angle after a strong prior swing signals decelerating momentum well before a lagging oscillator would confirm it, while a steepening angle on successive swings signals acceleration. Second, an optional Angle Momentum layer tracks a rolling average of the last several swing angles, smoothing out single-swing noise and revealing whether the broader structural rhythm of the market is strengthening or weakening. This combination — geometric normalization plus rolling angle smoothing — gives traders a structural momentum read that is not available from stock pivot tools or generic slope indicators alone.
🔬 Methodology and Concepts
• Confirmed Pivot Detection
The script identifies swing highs and swing lows using a symmetric fractal method: a bar is only confirmed as a pivot high if it is higher than a defined number of bars to its left and right, and likewise for a pivot low. The "Left Bars" and "Right Bars" inputs control how many bars on each side must confirm the extreme. Because the right-side bars must fully close before a pivot can be validated, every pivot marked on the chart is confirmed historical structure, not a live, moving estimate — the marker is deliberately plotted with a backward offset equal to the right-bar count so that its horizontal position matches where the actual swing extreme occurred, not where it was confirmed.
• Percent-to-Angle Conversion
Once two consecutive confirmed pivots of the same type (high-to-high or low-to-low) are available, the script calculates the percentage price change between them. This percentage is then optionally normalized by the number of bars separating the two pivots (via the "Normalize Angle by Bars" input), which converts the reading from "how much did price move" into "how much did price move per bar," a more useful measure of steepness when swings vary widely in duration. The resulting rate is passed through an arctangent function and converted from radians to degrees, producing a bounded, intuitive angle: values approaching plus or minus ninety degrees represent extremely steep percentage moves, while values near zero represent flat, sideways structure.
• Angle Momentum (Optional Smoothing Layer)
When enabled, the script maintains a running array of the most recent swing angles (separately for highs and lows) and reports their simple average over a user-defined lookback length. This produces a second-order reading: rather than looking at a single swing's angle in isolation, it shows whether the sequence of recent swing angles is, on average, steep or shallow, positive or negative — a way of gauging whether structural momentum is building or fading across several swings rather than just the most recent one.
• Live Dashboard
A compact on-chart table continuously summarizes the last confirmed high pivot price, the last confirmed low pivot price, the most recent high-swing angle, the most recent low-swing angle, and whether Angle Momentum smoothing is currently active, giving traders a persistent numerical snapshot without needing to hover over chart objects.
🎨 Visual Guide
Diagonal trend lines connecting consecutive swing highs (default red/green by angle sign) and consecutive swing lows are drawn directly between the two pivot points, visually representing the geometric slope being measured.
A small numeric label at the midpoint of each swing line displays the calculated angle in degrees, colored green for a positive (upward) angle and red for a negative (downward) angle by default.
When Angle Momentum is enabled, an additional label appears at the most recent pivot showing the smoothed "Mom" value in a distinct color (orange for highs, blue for lows by default), separated visually from the raw single-swing angle label.
Cross-style markers plot at each confirmed pivot high and pivot low directly on price, offset backward to align with the actual bar where the extreme occurred.
The dashboard table (position configurable) shows the symbol, timeframe, last high and low pivot prices, the latest angle readings for each, and the current on/off state of Angle Momentum.
📖 How to Use
Treat the angle label on each swing line as a normalized momentum reading for that specific leg of price action: steep angles indicate strong directional conviction, shallow angles indicate a weakening or consolidating move.
Compare the angle of the most recent swing to the angle of the swing before it. A sequence of progressively shallower high-to-high angles during an uptrend can indicate fading bullish momentum even while price is still making new highs, a structural early warning that pure price action alone may not show.
When Angle Momentum is enabled, use the smoothed "Mom" reading as a broader confirmation layer: a rising average angle across several swings supports the idea that momentum is genuinely building, rather than reacting to a single outlier swing.
Divergences between price structure and angle behavior — for example, higher swing highs paired with a declining angle momentum reading — can be used as a discretionary caution signal ahead of a potential trend deceleration.
The two alert conditions ("High Pivot Formed" and "Low Pivot Formed") can be used to build automated or semi-automated workflows that trigger only once a swing point is fully confirmed, rather than on every bar.
⚠️ Confirmation Lag Notice
All pivots and their associated angle calculations are confirmed structure. Because a pivot cannot be validated until the required number of bars on its right side have closed, every marker, line, and label is necessarily plotted a number of bars after the actual high or low occurred, equal to the "Right Bars" setting. The plotted markers are intentionally offset backward to align visually with the true location of the swing extreme — this does not mean the indicator is predicting or anticipating pivots in real time. Traders should treat swing confirmations as lagging structural events by design, not as leading signals.
⚙️ Inputs and Settings
Left Bars / Right Bars: Define the symmetric lookback and lookahead window used to validate a swing high or low. Larger values filter out minor fluctuations and confirm only more significant structural turning points, at the cost of a longer confirmation delay. Smaller values confirm pivots faster but are more sensitive to short-term noise.
Show High Swing Lines / Show Low Swing Lines: Independently toggle the diagonal trend lines connecting consecutive high or low pivots.
Show Swing Point Dots: Toggles the cross markers plotted directly at each confirmed pivot price.
Normalize Angle by Bars: When enabled, divides the percentage move between two pivots by the number of bars separating them before calculating the angle, producing a "steepness per bar" measure rather than a raw total-move angle. Useful for comparing swings of different durations on a more equal footing.
Use Angle Momentum: Enables the rolling average smoothing layer over the last several swing angles, plotted as an additional label at each new pivot.
Angle Momentum Length: Sets how many recent swing angles are averaged together for the smoothed momentum reading. Shorter lengths react faster to recent swings; longer lengths produce a smoother, slower-changing average.
Dashboard Position / Show Dashboard: Controls visibility and screen placement of the summary table.
High Pivot Action / Low Pivot Action: Custom text tags embedded into the JSON alert payload for each pivot type, useful for routing alerts to external automation systems that key off a specific action string.
Color inputs: Independently control the color of swing lines, angle text, pivot cross markers, momentum labels, and dashboard theming to match personal charting preferences.
🔍 Deconstruction of the Underlying Scientific and Academic Framework
The core of this indicator rests on classical trigonometric slope analysis rather than any single named technical analysis school. Converting a price move into an angle is mathematically equivalent to computing the arctangent of a rate of change, the same operation used broadly in engineering and physics to express a gradient as an angular measure rather than a raw ratio. Expressing the swing-to-swing move as a percentage change before applying the arctangent function normalizes the calculation across instruments of different absolute price levels, addressing a well-known limitation of naive "price-per-bar" slope measures, which are not comparable between a low-priced and high-priced instrument, or between two different timeframes without adjustment. The optional bar-normalization step draws on the same logic used in rate-of-change and momentum oscillators broadly, where a raw price delta is scaled by the time or bar interval over which it occurred to produce a comparable velocity-style reading rather than a simple magnitude.
The pivot detection mechanism itself is a fractal/symmetric extremum test, a widely used method in swing-structure analysis (related in spirit to Bill Williams' fractal indicator and to classical Dow Theory's emphasis on confirmed swing highs and lows as the building blocks of trend structure) that requires a candidate bar to dominate a defined number of bars on both sides before being accepted as a genuine local extremum. This symmetric confirmation requirement is a standard technique for filtering transient noise out of swing-point identification, at the deliberate cost of confirmation lag, a well-documented trade-off in any lookback-based extremum detection method. The Angle Momentum layer applies a simple moving average — one of the most foundational smoothing techniques in time-series analysis — to the sequence of discrete angle readings themselves rather than to price, effectively treating "swing angle" as its own derived data series and smoothing it the same way a moving average would smooth a price or oscillator series, in order to separate signal (the underlying trend in momentum) from noise (single-swing outliers).
⚠️ Disclaimer
All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. We expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion. Indicator
ICT Dynamic Entry Model & Structure Matrix PROICT Dynamic Entry Model & Structure Matrix PRO
ICT Dynamic Entry Model & Structure Matrix PRO is a clean, professional institutional charting script designed for traders following ICT mentorship principles and Smart Money Concepts. It delivers precise swing anchored market structure lines, dynamic trend candle themes, auto disappearing key levels, and gold highlighted expansion candles.
Key Features Overview
1. Precision Anchored BOS and CHoCH Structure
Market structure lines start exactly from the precise swing high or swing low origin price point. Text labels are positioned cleanly in the middle center of structure lines to avoid overlap with candlesticks.
2. Smart Trend Candle Engine
Driven by Intermediate Term High and Low levels. Once a red ITH prints, subsequent price candles dynamically adopt a solid bearish color scheme. When a green ITL prints, candles automatically convert to a bullish color scheme.
3. Gold Glowing FVG Expansion Candle Highlight
Identifies high momentum Fair Value Gap expansion candles, coloring the specific impulse candle in a distinct glowing gold yellow shade for instant institutional displacement detection.
4. Major ITH and ITL Level Badges
Features solid red Intermediate Term High badges and solid green Intermediate Term Low badges strictly at macro structural extremes.
5. Auto Disappearing Previous Day Boundaries
Tracks active Previous Day High and Previous Day Low boundaries. Daily lines automatically clean up and vanish as soon as price breaks or mitigates the level.
How to Use
Step 1: Identify Macro Shift
Look for green ITL badges for bullish bias or red ITH badges for bearish bias, which automatically adapts your overall candle colors.
Step 2: Monitor Centered Structure Signals
Observe precise dashed Break of Structure lines and solid Change of Character lines anchored directly from swing points with center aligned text.
Step 3: Spot Institutional Displacement
Identify gold glowing expansion candles that signal high volume displacement creating active Fair Value Gaps.
Settings Overview
Moving Average Settings
- Show Dual Moving Averages: Toggle visibility of EMAs.
- Period and Thickness Settings: Customize fast/slow periods and line width.
Market Structure Settings
- Show Precision BOS & CHoCH: Toggle centered structural lines.
- Sensitivity Period: Adjust pivot lookback calculations.
Smart Candle Settings
- Enable Smart Trend & Gold FVG Candles: Toggle dynamic trend colors and gold FVG expansion highlights.
Previous Day High and Low Settings
- Show Active PDH / PDL: Toggle display of auto disappearing daily key levels.
Entry Zone Settings
- Show Active Entry Zones: Toggle entry model rectangles and customize zone display text, text color, and fill opacity.
Disclaimer
This script is created strictly for educational, analytical, and charting enhancement purposes. It does not provide financial advice, trade recommendations, or guaranteed results. Always practice proper risk management.
Indicator
Dynamic ICT 2022 Model & Adaptive Structure PRODynamic ICT 2022 Model & Adaptive Structure PRO
Dynamic ICT 2022 Model & Adaptive Structure PRO is an institutional grade technical analysis tool engineered specifically for traders following Smart Money Concepts and ICT 2022 mentorship models. It automatically identifies major macro structural turning points, maps order flow shifts, and plots visual execution position setups optimized for both dark and light chart themes.
Key Features Overview
1. Major Intermediate Term High and Low Badges
Automatically filters market noise to detect major macro swing extremes. Displays clean red Intermediate Term High badges above macro tops and green Intermediate Term Low badges below macro bottoms.
2. Clean Visual Position Execution Tools
Projects sleek, clutter free Long and Short position tools directly at major ITH and ITL setups. The tool automatically maps out entry levels, invalidation stop zones, and dynamic 1:3 risk to reward target areas without messy text labels.
3. Adaptive Structure Shifts
Tracks real time market structure dynamics across all timeframes. Displays precise dashed Break of Structure lines and solid Change of Character signals as price expands.
4. High Contrast Dynamic Trend Wave
Features a smooth, multi layered trend wave that clearly defines overall market direction and dynamic order flow bias, fully optimized for white and light background charts.
How to Use
Step 1: Determine Macro Bias
Follow the direction of the High Contrast Dynamic Trend Wave to identify whether institutional order flow is currently expanding bullish or bearish.
Step 2: Spot Structural Pivots
Identify major highs marked with solid red ITH badges and major lows marked with solid green ITL badges.
Step 3: Analyze Visual Setup Zones
Utilize the built in visual position tools to observe invalidation boundaries and dynamic 1:3 risk to reward target zones following Market Structure Shifts.
Settings Overview
ICT 2022 Settings
- Show Major ITH / ITL & Position Tools: Toggle visibility of pivot badges and position tool boxes.
- Major Pivot Lookback Sensitivity: Adjust pivot lookback sensitivity to isolate macro highs and lows (default set to 20).
- Target Risk to Reward: Customize reward multiplier from 1:1 up to 1:10.
Trend Wave Settings
- Show Trend Wave: Toggle visibility of the dynamic trend wave.
- Wave Period Length: Adjust wave period length to match your trading timeframe.
Market Structure Settings
- Show BOS & CHoCH Lines: Toggle structural lines and text signals.
- Structure Sensitivity: Customize structural pivot lookback length.
Disclaimer
This indicator is created strictly for educational, analytical, and charting enhancement purposes. It does not provide financial advice, trade recommendations, or guaranteed results. Always apply proper risk management principles. Indicator
ICT London Liquidity & Structure Matrix PROICT London Liquidity & Structure Matrix PRO
ICT London Liquidity & Structure Matrix PRO is an ultra clean, professional charting tool built for traders practicing Smart Money Concepts and ICT methodologies. It isolates macro pivot points with clean blank badges, tracks Asian liquidity boundaries, highlights London Killzone sessions, and projects auto disappearing daily key levels.
Key Features Overview
1. Major High and Low Blank Badges
Marks key structural pivot extremes using clean, minimal solid badges without distracting text overlays. Major highs are marked with solid red badges, and major lows are marked with solid green badges for instant market direction identification.
2. Auto Mitigating Previous Day High and Low
Projects active daily boundaries across your chart. Previous Day High and Previous Day Low levels automatically clean up and vanish the moment price touches or mitigates them.
3. Clean Asian Session High and Low Boundaries
Tracks Asian range consolidation levels with subtle dashed lines and right aligned text labels, providing clear session liquidity targets.
4. Exclusive London Killzone Highlight
Keeps chart aesthetics clean by displaying a single, light background overlay strictly for the high volatility London Session window.
5. Dynamic Auto Mitigating Fair Value Gaps
Automatically identifies bullish and bearish price imbalances across all timeframes. Unmitigated imbalance boxes vanish as soon as price fills the gap.
How to Use
Step 1: Locate Structural Pivots
Identify major highs with red badges and major lows with green badges to assess macro trend bias and key liquidity pools.
Step 2: Monitor Asian Boundaries
Observe Asian High and Low lines created prior to the European open to anticipate potential liquidity sweeps.
Step 3: Execute During London Session
Focus on trade opportunities forming inside the highlighted London Killzone window upon retaps into active Fair Value Gaps.
Settings Overview
Pivot Badge Settings
- Show Major High / Low Blank Labels: Toggle visibility of pivot badges.
- Major Pivot Sensitivity Length: Adjust the pivot lookback period.
Previous Day High and Low Settings
- Show Active PDH / PDL: Toggle display of daily levels.
- Line Width and Style: Customize thickness and choosing between solid, dotted, or dashed lines.
Asian Session Settings
- Show Asian High & Low Levels: Toggle visibility of Asian boundary lines.
Session Highlight Settings
- Show London Killzone Highlight Only: Toggle background highlight for London trading hours.
Disclaimer
This script is built strictly for educational, analytical, and charting enhancement purposes. It does not provide financial advice, trade recommendations, or guaranteed results. Always apply proper risk management principles. Indicator
Indicator
Strong Gold H4 Pressure Zones | ProjectSyndicateStrong Gold H4 Pressure Zones
Strong Gold H4 Pressure Zones maps the gold trading day the way it actually moves — split into its true H4 rhythm — and reads three institutional layers on every candle slot: which parts of the session run hot, where the previous candle's wick left unfinished business, and where price gapped away from value. It is built to run on the M5 timeframe — M5 is the execution resolution the whole engine is calibrated to, while it thinks in H4, so you see the higher-timeframe structure forming live on your chart. Load it on an M5 XAUUSD chart for correct slot alignment and zone behaviour.
Most session tools just draw a box around the day. This one grades every H4 slot, projects the pressure the last candle built, and marks the gaps — all anchored to the daily candle open, identical for every trader on the planet.
🕐 True Gold-Day Slot Engine — the core. The gold day (≈23h with its 1-hour technical break) is sliced into six real periods: an H3 opening block, then five H4 candles — aligned to the actual 04:00 / 08:00 / 12:00 / 16:00 / 20:00 boundaries, not a naïve 4-hour count. Every slot is drawn as a shaded box built live from that slot's own high/low, anchored to the daily candle's open so the zones are the same in Miami, Dubai or Singapore regardless of chart timezone.
⏱️ Runs on M5 — by design. This indicator is meant to be applied on the M5 timeframe. The six H4 slots are built up tick by tick from M5 candles, and the pressure, volatility and FVG zones are all calibrated to that resolution. Apply it to an M5 chart — other timeframes will not slice the gold day correctly.
📊 20% Increment Grid — read position at a glance. Each slot box is split by horizontal guides at 0 / 20 / 40 / 60 / 80 / 100% of its range, labelled on the right. Instantly see whether price is pressing the extremes of the current H4 or coiling in the middle — the exact levels institutions lean on within a candle.
🌋 30-Day Session Volatility Profile — the rhythm read. This is not the current candle's volatility. Each of the six slots is averaged over the last 30 days and the six averages are ranked against each other 0–10, printing a fixed grade on every slot — CALM, MODERATE, HIGH, EXTREME. You learn which H4 windows of the gold session typically explode and which drift, so you size and time around the day's real character instead of guessing. The rank is static and colour-graded (calm teal → extreme purple), only drifting slowly as the rolling window updates.
🧲 Prior-Candle Pressure Zones — the wick memory. The heart of the tool. The moment a slot closes, it's read as a single composite H4 candle and its dominant wick is projected forward as a fixed pressure band inside the next slot:
A strong upper wick on the prior candle → SELL PRESSURE zone near the top (rejection from above — supply left overhead).
A strong lower wick on the prior candle → BUY PRESSURE zone near the bottom (rejection from below — demand left beneath).
Each band is graded 0–10 on wick dominance and printed with its score (▲ BUY PRESSURE 8.4/10 · ▼ SELL PRESSURE 7.2/10), opacity scaling with strength. These are fixed the instant the prior candle closes — they never repaint.
🔀 Prior-Slot Fair Value Gap — the imbalance carry-over. A true three-candle FVG detected on the H4 slots themselves (the slots are the candles), projected as a clean Fair Value Gap zone into the current slot, normalized to one uniform ATR-based height so no single gap swallows the chart. An optional gap-size filter keeps the noise out. You see the imbalance the last three candles left, drawn where it matters, without the clutter.
🎨 Fully Themed & Configurable. Volatility-graded box tones, custom buy/sell pressure and FVG colours, neutral increment grid, adjustable opacities, 2× increment and rank label sizing, per-module toggles, configurable opening-block / break / slot hours, volatility lookback, wick thresholds, FVG ATR length / extend / height, and sessions-to-plot depth.
🔒 Honest, Fixed-Zone Core. The live slot box repaints in price as the candle forms — inherent to showing a real-time H4 building on M5, not a defect. But every fixed output — the pressure bands, the FVG, the volatility rank — is locked to the prior completed candle and never redraws to flatter the chart. The 0–10 scores are descriptive ranking frameworks for directing attention, not backtested signals.
🚀 Built for XAUUSD on the M5 timeframe — the slot model matches gold's 23-hour day and 1-hour break out of the box. Use it on an M5 gold chart (adjust the hour inputs for other instruments).
🎯 How To Trade It — Pressure From The Prior H4
⏱️ Load the indicator on an M5 XAUUSD chart before anything else — the entire slot model is built for M5.
Everything hinges on one read: the last H4 candle told you where price got rejected — trade the current candle expecting that pressure to hold, or break with conviction when it fails.
◾ 1) Fade into a prior-candle pressure zone (the core thesis)
Use when the previous H4 left a strong wick and the current slot rotates back into that band.
▪️ The prior candle prints a strong lower wick → a graded BUY PRESSURE zone sits in the lower portion of the current slot. Buyers already defended there once. ▪️ Wait for price to rotate down into that band inside the current slot — ideally near the 0–20% increment level. ▪️ Entry: long as price reacts inside the buy-pressure zone; the higher the score (7+), the more the prior candle insisted on that level. ▪️ Stop: below the zone — if price closes through and accepts beneath it, the demand failed; stand aside. ▪️ Target: the mid-grid (50%) first, the opposite edge / prior-candle high on extension.
The mirror applies for a strong upper wick → SELL PRESSURE zone up top: fade rallies into it, stop above, target back down through the grid.
◾ 2) Weight it with the session profile
▪️ A pressure zone landing in a HIGH / EXTREME volatility slot means the reaction can be violent — expect follow-through and give the target room. ▪️ The same zone in a CALM slot means muted rotation — take the mid-grid and don't overstay. ▪️ The volatility rank tells you how hard the day's structure usually moves in that window before you commit.
◾ 3) Read the FVG as the pull
▪️ An unfilled Fair Value Gap projected into the current slot is where price is imbalanced — it often gets revisited. A buy-pressure zone below an open bullish FVG is confluence: rejection level plus imbalance both pointing up. ▪️ When a pressure zone and the FVG point opposite ways, that's conflict — let the slot resolve before committing.
◾ 4) Stand down — the map says wait
▪️ Prior candle closed as a clean body with no dominant wick → no pressure zone drew → no edge from rejection this slot. ▪️ Price already accepted through the pressure band → the level's spent. ▪️ CALM slot with no FVG and price mid-range → nothing worth risking on; let it develop.
Rule of thumb: ⭐ Strong prior-candle wick + price rotating into that graded pressure zone + a HIGH-volatility slot or aligned FVG → trade the rejection with the pull. ⭐ No wick, consumed zone, or dead CALM mid-range → stand down until the next candle sets the map.
⚠️ IMPORTANT NOTICE: Strong Gold H4 Pressure Zones is a structure-mapping tool designed for the M5 timeframe on XAUUSD. Pressure zones are projected from the prior H4 candle's wick geometry, the volatility rank is a 30-day per-slot average, and FVGs are drawn from three-candle gap logic — a model of behaviour, not exchange order-book data. The 0–10 scores are descriptive ranking frameworks for directing attention — NOT backtested signals and NOT standalone trade triggers. Fading into prior-candle pressure still carries real risk of failed levels and stop-outs. Always combine it with your own strategy, price-action analysis and risk management. Past behaviour does not guarantee future results. Indicator
Dynamic SMC & Market Structure PRODynamic SMC and Market Structure PRO
Dynamic SMC and Market Structure PRO is a comprehensive technical analysis tool designed for price action traders and Smart Money Concepts practitioners. It focuses on mapping structural context, tracking key daily and session liquidity levels, and highlighting major market turning points without cluttering your chart.
Key Features Overview
1. Major Swing Extreme Highlights
Automatically identifies major market peaks and bottoms. Major highs are highlighted with clean red shapes and major lows with clean green shapes. This gives traders an instant visual reading of macro market extremes.
2. Smart Money Structure Engine
Tracks real time market context by automatically identifying Break of Structure (BOS) for trend continuation and Change of Character (CHoCH) for potential trend reversals on valid swing points.
3. Dynamic Supply and Demand Zones
Plots high probability supply and demand areas directly on your chart. These dynamic zones automatically adjust and disappear as soon as price breaks through them, ensuring your charting area stays clean.
4. Auto Disappearing Previous Day High and Low
Projects active Previous Day High (PDH) and Previous Day Low (PDL) levels. As soon as price breaks or sweeps these daily liquidity boundaries, the lines automatically delete to keep focus on active price action.
5. Auto Disappearing Session Liquidity
Tracks Asian session highs and lows. Includes a smart proximity filter that prevents visual clutter when session levels align closely with daily highs or lows. Lines automatically disappear when swept by price.
6. Fibonacci 0.5 Equilibrium Range
Calculates the 50 percent Fibonacci Equilibrium line across recent price swings. This helps traders easily distinguish between Premium zones above 50 percent and Discount zones below 50 percent.
7. Clean Dashboard Panel
Displays an on screen information panel summarizing current structure trend, pricing zone state, daily liquidity sweep status, and active supply or demand zone counts.
How to Use
Step 1: Determine Structural Context
Check the market structure labels (BOS/CHoCH) and the Dashboard Panel to determine whether the market is currently in a bullish or bearish structure trend.
Step 2: Identify Premium vs Discount Pricing
Use the 0.5 Equilibrium Line to contextualize price position:
- Premium Zone (Above 0.5 EQ): Ideal area to evaluate short setups near active Supply Zones or recent Major High shapes.
- Discount Zone (Below 0.5 EQ): Ideal area to evaluate long setups near active Demand Zones or recent Major Low shapes.
Step 3: Monitor Liquidity Sweeps
Watch how price interacts with Previous Day High/Low and Session High/Low levels. When price sweeps one of these levels and the line disappears, look for a CHoCH reaction for potential reversal setups.
Step 4: Execute on Zone Reactions
Evaluate price action inside active Supply and Demand zones. When price enters a zone in alignment with the broader structural trend, look for lower timeframe confirmation.
Settings Overview
Major Swing Extremes Settings
- Show Major Swing High/Low Shapes: Toggle visibility of major high and low shapes.
- Major Swing Lookback Sensitivity: Adjusts the pivot lookback length used to detect major market extremes.
Smart Money Structure Settings
- Show BOS and CHoCH Lines: Toggle visibility of structural break lines and text tags.
- Structure Sensitivity (Pivot Length): Controls how sensitive the script is to structural swing points.
Dynamic Supply and Demand Settings
- Show Dynamic Supply and Demand Zones: Toggle display of active supply and demand boxes.
- Max Active Zones Per Side: Controls the maximum number of active supply or demand zones displayed simultaneously.
- Zone Transparency: Adjusts the color opacity of the supply and demand boxes.
Auto Disappearing PDH and PDL Settings
- Show Active PDH / PDL: Toggle display of Previous Day High and Low lines.
Session Highs and Lows Settings
- Show Session High/Low Lines: Toggle display of session liquidity lines.
- Clutter Distance Threshold: Sets the distance threshold in pips or points to prevent overlapping lines when levels are close.
Fibonacci Equilibrium Settings
- Show 0.5 Equilibrium Line: Toggle display of the 50 percent mid point level.
- Equilibrium Lookback Range: Adjusts the lookback period used for calculating recent swing highs and lows.
Pro Tips for Effective Usage
Tip 1: Trade in Alignment with Macro Extremes
Higher probability trade setups occur when price retests a Demand Zone near a Green Major Low shape, or a Supply Zone near a Red Major High shape.
Tip 2: Multi Timeframe Alignment
Mark major structure and supply/demand zones on higher timeframes like 1 Hour or 4 Hour, then switch to lower timeframes like 5 Min or 15 Min for CHoCH entry confirmation.
Tip 3: Pay Attention to Swept Levels
When a PDH or Session High line disappears after price spikes through it, observe if price quickly reverses back inside the range. This often signals institutional liquidity hunting.
Things to Avoid
1. Avoid Entering Inside Invalidated Zones
Do not trade setups from supply or demand zones that have already been broken through by price closes.
2. Avoid Counter Trend Entries at Equilibrium
Do not take aggressive short entries right at the 0.5 Equilibrium line when the market is making strong consecutive bullish BOS breaks.
3. Avoid Over Sensitivity on Low Timeframes
Do not use extremely low pivot lookback settings on sub minute charts to avoid unnecessary noise in structure detection.
Disclaimer
This tool is built strictly for educational and analytical purposes. It does not offer financial advice, trade signals, or guaranteed outcomes. Always practice proper risk management. Indicator
Volatility Corridor - Quantized Equilibrium LevelsMost range and channel tools slide. The midline is a moving average, so it moves on every bar, and the levels drawn from it move with it. That makes them fine as a trend read and close to useless as levels, because the level you looked at ten bars ago is no longer where you left it.
Volatility Corridor does the opposite. It holds still, and then it jumps.
HOW THE CORRIDOR IS BUILT
An equilibrium anchor sits at the centre of the corridor. Once placed, it is frozen. It does not drift, it does not smooth, it does not respond to anything at all until price closes more than one volatility step away from it.
When that happens, the anchor jumps by a whole number of steps in the direction of the breach, lands at the new location, re-measures its step size from ATR at that exact moment, and freezes again.
Three bands are drawn one step apart above the anchor and three below, giving seven horizontal levels: S3, S2, S1, EQ, R1, R2, R3. Because the anchor and the step are both frozen between jumps, every one of those levels is a genuine flat horizontal line for the entire life of the corridor. Across a chart the result is a staircase of stable shelves rather than a wave, and the jump bars are marked so the history of the structure is readable at a glance.
The quantization matters. The anchor moves by whole steps, never by fractions, so successive corridors line up on a common grid instead of drifting off it. When price returns to an area it traded weeks ago, the corridor tends to rebuild on the same shelves rather than near them.
WHAT IS ON THE CHART
Seven stepline levels, thickest at the equilibrium.
Six filled bands between them, darkening toward the outer edges, so the corridor reads instantly without inspecting a single number.
Candles tinted by their position inside the corridor, running from the lower colour at the bottom edge through neutral at equilibrium to the upper colour at the top.
Background tint whenever price is trading fully outside the corridor.
Price labels on every level at the right edge, in four selectable sizes.
Jump markers at the top and bottom of the pane showing every bar the corridor re-anchored, and in which direction.
SETUPS
Two setups are defined, and either can be switched off.
Reversion. Price has pushed into the outer band and closes back inside it while still on its own side of equilibrium. The stop is the far outer level, and the targets are the levels above: equilibrium first, then the next band, then the one after that. The reasoning is that a corridor that is holding will pull price back toward its centre, and the level structure already provides the map for that journey.
Breakout. Price closes fully beyond the outer level of the corridor. The stop is the first level back inside, and the targets are projected one, two and three steps beyond the corridor edge, on the same grid the corridor itself uses.
In both cases the stop and the targets are structural levels, not multiples of risk. Nothing is placed at an arbitrary distance. The stop is where the structure would be wrong, and the targets are the next shelves on the grid.
Only one setup is tracked at a time. A new signal cannot silently replace an unresolved one.
The panel keeps a record of whether the first target or the stop was reached first, and prints collecting rather than a percentage until the sample is large enough to mean anything. That number is a narrow measurement of one mechanical rule, not a backtest, and it says nothing about what a trader who moved a stop or scaled out would have achieved.
SETTINGS
Step Size is the one dial that matters. It sets the width of a single band in ATR terms, and therefore how far price must travel to force a jump. Larger values give wider, rarer, more significant corridors. Smaller values give a tighter grid that re-anchors often.
Volatility Length sets the ATR lookback used to measure a step at each anchor. Longer is more stable.
Everything else is cosmetic: fills, candle painting, label size, level thickness, background tint.
REPAINTING
The anchor, the step size, the jumps, the setups and the alerts all evaluate on confirmed bars only. A level that is drawn is final for the life of the corridor and is never moved retroactively. The script requests no higher timeframe data.
READING IT
Equilibrium is the fair value the corridor is currently defending. Price oscillating around it is a market with no directional decision.
The outer bands are where the current corridor stops being an adequate description of price. Price reaching them means one of two things is about to happen: it is rejected and the corridor holds, or it closes through and the whole structure jumps to a new shelf. Both are tradable and both have a setup defined for them.
A corridor that survives many bars is a market that has agreed on value. A rapid sequence of jumps in one direction is a trend, and the jump markers make that sequence obvious even when the candles do not.
This is an analysis tool, not financial advice, and not a trading system. The setups are two mechanically defined patterns, and no pattern has an edge on its own. Use it with your own risk management and position sizing. Indicator
Zone Flow S/R StrategyZone Flow S/R Strategy
📌 Strategy Overview
Zone Flow is a multi‑timeframe support/resistance strategy that uses dynamic pivot‑derived zones to identify high‑probability reversal and breakout setups.
Unlike static support/resistance lines, this 9‑level zone system (R4–R1, P, S1–S4) automatically adapts to market structure changes at each new period (Daily/Weekly/Monthly). Each zone has a configurable width (Percentage, ATR, or Fixed) to account for volatility, and a breakout threshold to filter out minor wicks.
# Unique Synergy
Most pivot strategies treat levels as static lines, leading to false breakouts. Most engulfing strategies ignore the bigger picture, catching falling knives. This strategy solves both problems by combining these components in a specific sequence:
1- Dynamic Zones + Gap State Machine (The Context)
Instead of just drawing lines, we create zones (R1-R4, P, S1-S4) with adaptive width. More importantly, the Gap State Machine tracks which gap price sits in (e.g., between R1 and Pivot). This tells us exactly where we are in the market structure. If price moves from upper Gap to lower Gap, the strategy instantly switches sentiment from Bullish to Bearish.
- Why this matters: It prevents the strategy from trading blindly; it only trades when price is transitioning between structural levels, and price retrace to the zone drastically reducing false signals in the middle of nowhere.
2- Pin Bar Sweep + Engulfing Combo (The Momentum Trigger)
A standard pin bar alone is a weak reversal signal. A standard engulfing pattern alone is common. However, when a Pin Bar sweeps the N-bar high/low (proving a breakout attempt failed) and is immediately followed by an Engulfing pattern on the next candle, this combo represents a "double confirmation" of exhaustion.
Crucially, this specific combo overrides the EMA confirmation.
- Why this matters: Strong momentum sweeps often happen against the short-term EMA trend. By allowing this specific combo to bypass the EMA, the strategy captures powerful reversals that pure trend-following strategies miss.
3- Dynamic Zone Width (The Volatility Adaptation)
Instead of using fixed support/resistance, the zone width changes based on the selected Period's ATR or Percentage.
- Why this matters: This ensures the strategy scales perfectly across any asset (Gold, Crypto, Forex) without manual width adjustments, making it robust across different volatility regimes.
4- Selective Zone Activation (The Manual Override)
Unlike standard pivot systems that force trades on every level, the Zone Selection inputs allow users to disable specific zones (e.g., turn off R3 if price often fakes out there or turn off S4 market is always get exhausted lower probability trade).
- Why this matters: This turns the strategy from a rigid algorithm into a customizable framework where the user can apply their own discretion based on historical price behavior.
5. Hierarchical EMA Architecture (The Structural Governor)
This strategy does not treat all EMAs equally. It uses a two-tier EMA system with a strict hierarchy:
Lower TF EMA (Optional & Overrideable): The Lower TF EMA on the current timeframe acts as a micro-trend filter. However, as explained above, the Pin Bar Sweep + Engulfing Combo can override this filter. Why? Because strong institutional reversals often happen against the short-term trend, and we want to capture them.
Higher TF EMA (Absolute & Non-Negotiable): Higher TF EMA on the selected Higher Timeframe acts as an "Absolute Structural Governor." Unlike the lower EMA, this filter cannot be overridden by any pattern.
For Long entries: Price must be above this HTF EMA.
For Short entries: Price must be below this HTF EMA.
Most strategies either ignore the HTF entirely. By making the HTF EMA absolute and the LTF EMA overrideable, this strategy achieves the perfect balance:
The HTF EMA prevents catastrophic drawdowns by keeping you on the right side of the bigger trend.
The LTF EMA override allows you to catch sharp, high-probability reversals within that trend without being delayed by a slow-moving micro-filter.
6. Optional Risk Architecture (The Management Layer)
The strategy includes a built-in partial-take-profit and breakeven module. By default, this module is disabled to provide a clean, straightforward 1:3 risk-reward backtest without the complexity of multiple exit orders.
This default setting allows users to evaluate the core entry logic (zones + patterns) without interference from partial exits.
However, for traders who want to reduce psychological pressure or manage Gold's notorious retracements, they can enable Allow Breakeven and Allow Partial TP. When activated, the strategy closes a percentage of the position (e.g., 50%) at a lower R:R threshold (TP1) and moves the remaining position to breakeven—locking in early profits while letting the rest of the trade run.
# Zone Calculation
The strategy calculates 9 zones using a modified pivot point formula from the selected period (Daily, Weekly, Monthly, Quarterly, Yearly):
The pivot formula can be one of 5 methods: Classic, Fibonacci, Woodie, Camarilla, or DM.
The Classic Pivot (shown below) is the most widely used and serves as the default:
Pivot (P) = (H + L + C) / 3
R1 = (2 × P) – L
S1 = (2 × P) – H
R2 = P + (H – L)
S2 = P – (H – L)
(R3, R4, S3, S4 are logical extensions of this same principle)
Additional Methods (Briefly Explained):
Fibonacci: Uses the golden ratio multipliers (0.382, 0.618, 1.000, 1.618) to place support/resistance levels between the pivot and the high/low range.
Woodie: Gives extra weight to the closing price (Formula: P = (H + L + 2C) / 4), making it more sensitive to the current session's momentum.
Camarilla: Uses multipliers based on the previous range to place levels very close to the current price, ideal for range-bound trading and scalping.
DM: Adjusts the pivot formula conditionally based on whether the close was higher or lower than the open, making it adaptive to daily sentiment.
From these, the strategy derives:
- 4 Resistance Zones (R4, R3, R2, R1) – above the pivot
- 1 Pivot Zone (P)
- 4 Support Zones (S1, S2, S3, S4) – below the pivot
Each zone is expanded by a Zone Width to create a buffer, making the levels more practical.
# Zone Width Calculation
Three modes:
- Percentage – zone width as a percentage of current price
- ATR Multiplier – width = ATR × Multiplier
- Fixed – fixed price distance
# Gap Index Mapping (0–9):
Gap 0 – Above R4 → Aggressive (no trades)
Gap 1 – Between R4 and R3 → Bearish near R4, Bullish near R3
Gap 2 – Between R3 and R2 → Bearish near R3, Bullish near R2
Gap 3 – Between R2 and R1 → Bearish near R2, Bullish near R1
Gap 4 – Between R1 and Pivot → Bearish near R1, Bullish near Pivot
Gap 5 – Between Pivot and S1 → Bearish near Pivot, Bullish near S1
Gap 6 – Between S1 and S2 → Bearish near S1, Bullish near S2
Gap 7 – Between S2 and S3 → Bearish near S2, Bullish near S3
Gap 8 – Between S3 and S4 → Bearish near S3, Bullish near S4
Gap 9 – Below S4 → Aggressive (no trades)
Based on the gap index and price action, the strategy sets allowLong or allowShort – and displays the status on the info table.
Market Status Displayed:
- Bullish – near support zones; long trades allowed
- Bearish – near resistance zones; short trades allowed
- Waiting – new period started; zones recalculating; no trades
- Aggressive – above R4 or below S4; no trades
- Zone disabled – manually disabled zone; no trades
# Entry Signals
1. Engulfing Patterns
Detects bullish and bearish engulfing with filters:
- Body Only – if true, only bodies must engulf (not full range)
- Min/Max Range – can be Percentage, ATR Multiplier, or Fixed
- Gap Allowance – max price gap between previous close and current open
- Previous or Prior Candle – at least one of the last two candles must be the opposite. color (bearish for bullish engulf; bullish for bearish engulf).
This is not a random condition. The strategy only considers trades when price is near a strong structural zone (support/resistance). Because the zone itself provides the primary context for a potential reversal, the immediate previous candle does not need to be strictly opposite in color.By relaxing the requirement to "at least one of the last two," the strategy captures valid reversals at key levels that a strict, textbook rule would miss—while remaining highly selective because it only trades near strong zones.
2. Pin Bar + Engulfing Combo (EMA Override)
Identifies hammers/shooting stars with:
- Wick/Body Ratio (Wick 3× body)Requires a clearly defined pin bar with a very small body.
- Max Body/Range (Body is at most 20% of range) Ensures the body is genuinely small relative to the total range. This is the textbook definition of a pin bar/hammer. Captures true rejection candles.
- Min Wick/Range (70% of range) This is the classic pin bar definition. A 70%+ wick means price aggressively rejected the level and reversed.
- Sweep Lookback – bullish pinbar must break the lowest low of the previous N bars;
bearish must break the highest high
a pin bar that sweeps a recent extreme (lookback) and the very next candle forms an engulfing pattern in the same direction. This combo overrides the Lower TF EMA confirmation – a unique feature that captures strong momentum after a sweep.
Combined Entry Requirements
All of the following must be true:
1. Valid engulfing or pin+engulf combo
2. Pattern occurs near a zone (open inside zone boundaries or crossing it)
3. Market status aligns with trade direction
4. Daily trade limit not exceeded (default: 2)
5. Relevant zone is enabled
6. Price is on the correct side of EMAs (unless overridden by combo)
7. HTF EMA confirms (if enabled)
8. RSI not overbought/oversold (if enabled)
9. Not within the no‑trade window (if enabled)
-----------------------------------------------------
# Confirmation Filters
Current TF EMA – ensures micro‑trend alignment. Overridden by pin+engulf combo.
Higher TF EMA (default 150 on 1H) – filters out counter‑trend moves in the bigger picture.
RSI – prevents buying above 70 and selling below 30.
Bollinger Bands – blocks trades when volatility is too low (BB width below threshold).This filter is specifically designed for assets that range heavily—choppy, sideways markets.
No‑Trade Window – avoids end‑of‑day volatility (active only for timeframes ≤15min).
# Risk & Position Management
1- Position Sizing:
- Risk per trade – percentage of equity for first trade, separate for second
- Position size = (Account Risk) / (Entry – SL distance).
- Second trade does not increment the daily trade counter:
This is a deliberate design choice. The daily trade counter tracks new trade initiations, not total positions. The second trade (pyramiding) is considered a continuation of the existing position, not a new independent decision. This ensures the strategy can scale into strong trends without consuming the daily limit, while still respecting the maximum number of new entries per session.
2-Stop Loss Options:
- Low-High – entry bar low/high ± buffer Tight, reactive stops. Best for scalping or when you want the SL to follow the immediate price action of the entry candle.
- Swing high/low – N-bar low/high ± buffer Broader, structural stops. Ideal for swing trading or when you want the SL to respect recent market structure rather than a single bar.
- Zone – zone boundary ± buffer Structural stops aligned with pivot levels. Best when you want the SL to be placed exactly at the structural support/resistance level that defines the trade.
- Fixed distance – fixed price distance Simple, static stops. Useful when you know your exact risk tolerance in dollar/pip terms and want a consistent SL distance regardless of volatility.
- ATR Multiplier – entry ± (ATR × multiplier) Volatility-adaptive stops. Best for Gold's changing volatility—widens during news/high volatility, tightens during calm periods.
3- Take Profit:
- Main R:R ratio – main R:R ratio (default 1:3), plus optional partial TP and breakeven at a lower R:R ratio.
- Partial TP – close a percentage of position at a lower R:R (TP1)
- Breakeven – optionally move stop to entry at TP1
4- Trade Counter Reset:
- For TF ≤ 15m: resets at NY (9:30 AM) and London (3:30 AM) starts (configurable)
This aligns with Gold's session-specific volatility and allows fresh participation in each session while preventing over-trading within a single session.
- For TF > 15m: resets once per day at session start (Every new day) Session-specific behavior is less relevant on higher timeframes, and a simple daily cap is more appropriate for swing trading.
5- No‑Trade Window:
- Avoids high‑volatility periods (e.g., end of day)
- Active only for TF ≤ 15m (16:00 PM – 18:30 PM NY time, configurable) End-of-day volatility spikes can cause excessive slippage and erratic price action on short timeframes. on TF > 15 The window is too short to be meaningful; higher timeframe traders are less affected by brief volatility spikes.
6- Session Close:
- TF ≤ 15m: can close at day end and/or week end (configurable). Scalping trades on 1m–15m charts typically last minutes to a few hours. These trades are highly sensitive to Overnight gaps, Weekend gaps
- 15m < TF ≤ 10h: only week end. Swing trading on 30m–4H charts typically lasts hours to several days.
- TF > 10h: feature disabled. Position trading on daily+ charts lasts days to weeks. These trades aim to capture large macro moves.
# Chart Display
- Zone boxes – semi‑transparent red/pink with labels (R4…S4), auto‑cleanup (max 55 periods)
- Trade management lines – entry (white), SL (red), TP (green), TP1/breakeven (dashed),
with green/red fills; auto‑cleanup ((4) * max 125)
- Info table (top‑right) :
1. shows Market Status(Bullish/Bearish/Aggressive/Waiting).
2. EMA confirmations.
3. Zone Width, Breakout threshold.
4. Engulf range max min.
5. SL settings(SL refrence, sL bufer)
- EMA plots – light blue (lower TF) and light red (higher TF)
- Signal shapes – hidden by default (can be enabled via style settings)
- arrowdown shapes - "Reset trade counter"
- Background 1 color – yellow during no‑trade window
- Background 2 color – white close all position on week/day end.
UI Note: Inputs are hidden from the status line to keep your chart clean. All settings (zones, EMAs, risk, patterns) remain fully adjustable in Settings → Inputs.
# Default Settings – Optimized for XAUUSD (Gold)
All default values have been calibrated specifically for Gold's typical volatility and intraday structure.
(Setting : Default : Why This Works for Gold)
----------------------------------------------------------------------------------------
Period : Daily : Gold respects daily highs/lows as key structural levels.
-----------------------------------------------------------------------------------------
Pivot Type : Classic : Most widely used and reliable for Gold.
-----------------------------------------------------------------------------------------
Zone Width : ATR (0.053× ATR(14)) : ATR(14) provides a stable, week-to-week view of Gold's volatility (roughly two trading weeks of data).Adapts to Gold's daily volatility (Zone Width often $4–$10 range).
-----------------------------------------------------------------------------------------
Breakout Threshold : 7% of zone width : Zone width ≈ $3.00–$10.00 (Daily ATR × 0.053). 7% ≈ $0.21–$0.70 (21–70 ticks)—filters noise wicks, captures genuine breaks.Prevents false transitions caused by standard stop-hunting wicks
-----------------------------------------------------------------------------------------
Engulfing Range : ATR(14) (0.375× – 2.5×) : ATR(14) sits in the "sweet spot"—responsive enough to capture shifts in Gold's volatility relatively quickly, yet long enough to smooth out the daily noise and provide a reliable, consistent measure. Captures meaningful moves $3–$15—ensures candle has enough size to be meaningful, rejecting tiny $0.30–$0.50 noise patterns, while filtering out massive blow-off spikes (> $20–$25 on 15m).
-----------------------------------------------------------------------------------------
Pin Bar Sweep : 12 bars : 12 bars – Calibrated for Gold's 3-hour intraday cycle and session transitions. Long enough to capture genuine liquidity grabs, short enough to avoid outdated levels.
-----------------------------------------------------------------------------------------
Risk per trade : 2% (1st), 1% (2nd) : Balances risk with Gold's occasional false breakouts. For Gold's volatile nature, 2%-1% provides the best balance between survival and growth.
-----------------------------------------------------------------------------------------
Risk:Reward : 1:3 : Gold routinely moves 1.5–2× its ATR in a single directional push. A 1:3 target is well within Gold's typical daily range.
-----------------------------------------------------------------------------------------
Stop-Loss Reference : ATR Multiplier : For Gold's volatile nature, a static stop-loss (Fixed or Low-High) cannot adapt to changing volatility. ATR-based SL scales with market conditions—widening during high volatility (news, session opens) and tightening during calm periods. This ensures the stop-loss is always "fair" relative to current market conditions, preventing premature stops during normal volatility spikes
-----------------------------------------------------------------------------------------
Stop-Loss Multiplier : 1.8× ATR(14) : A 1.8× ATR(14) stop-loss represents 1.8 times Gold's average 14-period range. Why 1.8× and not 2.0× or 1.5×? Backtesting revealed that 1.8× is the "sweet spot"—wide enough to survive Gold's normal volatility spikes without being stopped out by noise, yet tight enough to limit losses
-----------------------------------------------------------------------------------------
Current TF EMA : 21 (Enabled, Overrideable) : On 15m chart = 5.25 hours—perfectly captures Gold's average intraday move length. Can be overridden by Pin Bar + Engulfing Combo to catch institutional reversals that occur against the short-term trend.
-----------------------------------------------------------------------------------------
Higher TF EMA : 150 on 1H : On Gold, a 150-period EMA on a 1H chart represents roughly 6.5 days (one full trading week) of data. By making this filter absolute, the strategy guarantees it will never take a counter-trend trade against the weekly macro-structure.trend.
-----------------------------------------------------------------------------------------
Filter (RSI) : length 12 : Most traders default to RSI(14), but RSI(12) is intentionally faster for Gold's volatile intraday moves. Gold often spikes into overbought/oversold territory and reverses quickly. A 12-period RSI reacts ~15% faster than RSI(14), catching these reversals earlier while remaining smooth enough to avoid excessive whipsaws.
-----------------------------------------------------------------------------------------
Filter (Bollinger Bands) : Disabled by default : Gold is historically a trending asset with strong directional moves. A low-volatility filter would unnecessarily block valid entries during these trends. Designed for range-bound assets (choppy crypto, certain forex crosses)—enable it only if your market consolidates heavily.
-----------------------------------------------------------------------------------------
These values are a starting point – you may adjust them for other assets or personal risk tolerance.
# Important Notes on Backtest Realism
- Commission – Most ECN/raw-spread brokers charge $3.00–$3.50 per side (round-turn commission of $6.00- $7.00) for 1 standard lot (100 oz) of XAUUSD. Standard accounts usually build the fee into a wider spread instead of charging a separate cash. This strategy deducts $3.50 per entry and $3.50 per exit ($0.035 × 100 oz)round-turn commission of $7.00. Adjust this to match your broker's exact fees.
- 4 ticks Slippage - For XAUUSD, 1 tick = $0.01 per ounce. 4 ticks = **$0.04 per ounce (unit)**. Accounts for real-world price . Prevents overly optimistic backtest equity curves.
Always adjust the commission value to your broker's exact fee structure before relying on the results.
"A backtest without realistic commission and slippage is a fantasy. A backtest with realistic commission and slippage is a truthful reflection of what you can expect when trading live."
- Intra-Bar Execution: The strategy uses calc_on_every_tick = true, meaning it recalculates on every price tick during real-time trading. This allows the breakeven and partial TP logic to trigger immediately when price hits TP1, protecting the trade from intra-bar reversals.
Note: Backtests use OHLC data only, so intra-bar fills and breakeven triggers cannot be perfectly simulated. Real-time performance may differ from backtest results due to this limitation
# The Core Innovation (Why This Isn't Just a Mashup)
This strategy is built on a three-layer validation system. Each layer solves a specific problem that the other layers cannot solve alone.
Layer 1 (The Structure): Dynamic Pivot Zones
Layer 2 (The Trigger): Pin-Bar Sweep + Engulfing Combo
Layer 3 (The Execution): Gap State Machine
Here is how they interdepend to create a unique edge:
1. Adaptive Pivot Mathematics (The "Regime Matching" Logic)
Instead of offering multiple pivot types just for the sake of it, this strategy provides them so the trader can match the mathematical formula to the market's current behavioral regime:
Why this matters: Most strategies lock you into one formula. This strategy acknowledges that price dynamics change, and it gives you the mathematical weapon to adapt without rewriting the entire code.
2. The "Liquidity Grab" Trigger (Sweep + Engulfing Combo)
This is the most critical edge of the strategy. A standard Engulfing pattern is common. A standard Pin Bar is common. But when they occur sequentially—a Pin Bar that sweeps the 12-bar extreme, immediately followed by an Engulfing candle—it represents a textbook institutional "liquidity grab."
- The Logic: Large players often push price to sweep obvious stop-losses (above highs or below lows) before reversing the trend.
- The Override: Crucially, this specific combo overrides the Lower TF EMA confirmation.
- Why this is a breakthrough: Standard trend-following strategies with a hard EMA filter will miss these reversals because price is moving against the EMA in the short term. By programming this specific override, the strategy captures the exact moment of institutional reversal—catching the move before the EMA flips and the trend-followers finally enter.
3. The Gap State Machine (Dynamic Sentiment Tracking)
Unlike static support/resistance scripts that just plot lines and wait for touches, this strategy features a state machine that tracks which of the 9 gaps (between R4-R1, Pivot, S1-S4) the price currently occupies.
- The Mechanism: A Breakout Threshold (default 7% of zone width) acts as a "dead-zone" filter. Price must exceed this threshold to officially transition from one gap to another.
- The Alpha: This prevents the strategy from whipsawing during minor noise. When price crosses from Gap 4 (between R1 and Pivot) into Gap 3 (between R2 and R1), the strategy instantly and autonomously switches market status from "Bearish" to "Bullish" or vice versa.
4. Selective Zone Activation (Strategic Discretion)
- This strategy allows the user to completely disable specific zones (e.g., turn off R3).
- The Value: By disabling a weak level, the user forces the strategy to wait for the next stronger level, instantly increasing the win rate and filtering out historically weak signals without altering any other code.
5. Non-Invasive Risk Architecture (Clean Defaults)
For traders who want to reduce psychological pressure or optimize for Gold's notorious retracements, they can enable these modules. When activated, the strategy closes % of the position at a lower R:R threshold and moves the remaining position to breakeven—locking in profits while letting the rest run.
In Summary: The "Mashup" Justification
This is not a random collection of indicators.
1. The State Machine provides the structural context.
2. The Pin+Engulf combo provides the high-conviction trigger that overrides slow-moving filters.
3. The Selectable Pivot Types provide the mathematical adaptability to different assets.
4. The Selectable Zones provide the manual discretion to avoid historical losing levels.
5. The Disabled TP/BE by default provides a clean baseline for evaluating the core logic.
Author: Awab_Hassan
Strategy
Advanced Market StructureAdvanced Market Structure
The Advanced Market Structure indicator is a comprehensive technical analysis script built for price action traders, Smart Money Concepts (SMC) practitioners, and market structure analysts. It helps traders map market context, spot key liquidity sweeps, and trade along institutional flow without cluttering the chart.
Key Features Overview
1. Smart Money Market Structure Engine
Automatically detects Break of Structure (BOS) for trend continuation and Change of Character (CHoCH) for potential trend reversals on valid swing points.
2. Intermediate Term Structure (ITH and ITL)
Replaces generic entry labels with institutional Intermediate Term Highs (ITH) and Intermediate Term Lows (ITL). These point out major liquidity pools where smart money often seeks liquidity.
3. Dynamic Candle Glow and Phase Detection
Calculates ATR and price expansion/contraction in real time to visually separate Consolidation phases from Expansion phases directly through candle coloring.
4. Auto Disappearing PDH and PDL
Plots Active Previous Day High (PDH) and Previous Day Low (PDL). As soon as price breaks through these liquidity levels, they automatically disappear to keep your workspace clean.
5. Dynamic 0.5 Equilibrium Range
Calculates the 50 percent Fibonacci Equilibrium line across recent swings, making it easy to identify Premium and Discount pricing zones.
6. Glowing Wave Line and Dashboard
Combines a dynamic Hull Moving Average trend line with a clean on screen dashboard displaying active structure context, market phase, and key level statuses.
Detailed How to Use Guide
Step 1: Determine the Macro Bias
Check the Glowing Wave Line color and recent market structure labels. A sequence of bullish BOS signals along with price staying above the Wave Line indicates a strong bullish bias.
Step 2: Identify Premium vs Discount Zones
Use the 0.5 Equilibrium Line to contextualize price position:
- Premium Zone (Above 0.5 EQ): Ideal area to search for short setups near Intermediate Term Highs (ITH) or Bearish CHoCH signals.
- Discount Zone (Below 0.5 EQ): Ideal area to search for long setups near Intermediate Term Lows (ITL) or Bullish CHoCH signals.
Step 3: Wait for Phase Transition
Observe the Candle Glow Engine. When candles transition from neutral or consolidation colors to strong trend expansion colors near an ITL or ITH level, it signals institutional participation.
Step 4: Liquidity Sweeps (PDH and PDL)
Watch how price interacts with Previous Day High and Low. A sweep followed by an immediate CHoCH back inside the daily range often offers high probability reversal scenarios.
Settings Overview and Customization
Candle Glow and Consolidation Settings
- Trend Momentum Lookback: Adjusts the sensitivity of the volatility calculation.
- Consolidation Range ATR Multiplier: Sets the sensitivity threshold for detecting squeeze or ranging market conditions.
Market Structure (BOS and CHoCH) Settings
- Structure Sensitivity (Pivot Length): Controls how sensitive the script is to swing points. Lower values (3 to 7) show lower timeframe structure, while higher values (10 to 20) show major structural points.
- Structure Colors: Full color customization for bullish and bearish structure lines and text labels.
Major Structure Labels (ITH and ITL) Settings
- Major Pivot Lookback: Defines the bar count required to mark Intermediate Term Highs and Lows.
- Label Customization: Customize colors and visibilities for ITH and ITL tags.
Previous Day High / Low and Equilibrium Settings
- Toggle Show Active PDH / PDL: Turn daily high/low tracking on or off.
- Equilibrium Lookback: Adjusts the swing period used to generate the 50 percent Fibonacci level.
Pro Tips for Effective Usage
Tip 1: Trade in the Direction of Macro Wave
For higher probability trades, take long positions when price is in a Discount Zone and the Wave Line is green. Take short positions when price is in a Premium Zone and the Wave Line is red.
Tip 2: Focus on Multi-Timeframe Confluence
Identify ITH/ITL levels on higher timeframes (such as 1-Hour or 4-Hour) and drop down to lower timeframes (5-Min or 15-Min) to spot CHoCH signals for refined entries.
Tip 3: Look for Liquidity Grab Reactions
Pay close attention when an active PDH or PDL line disappears. If price breaks the level and quickly creates a CHoCH in the opposite direction, it indicates a false breakout / liquidity sweep.
Things to Avoid
1. Avoid Trading During Consolidation
Do not take aggressive breakout entries when the Candle Glow engine highlights market consolidation. Wait for an explicit expansion candle close outside the range box.
2. Avoid Trading Counter Trend at Equilibrium
Do not short right at the 0.5 Equilibrium line if the overall structural trend is strongly bullish with consecutive bullish BOS signals.
3. Avoid Over Sensitivity on Scalping Timeframes
Do not set the Structure Sensitivity too low (below 3) on sub-minute charts, as minor price noise may generate excess structural markings.
Disclaimer
This tool is built strictly for educational and analytical purposes. It does not provide financial advice or direct trading signals. Always practice proper risk management and position sizing. Indicator
S/R ZonesS/R Zones — Volume-Based Support & Resistance
OVERVIEW
S/R Zones automatically detects relevant support and resistance zones based on abnormal volume activity. It is a support/resistance indicator based on volume: instead of relying on manually drawn horizontal lines, it identifies the price zones created by unusually high-volume bars and tracks how price interacts with them over time.
HOW IT WORKS
1. Volume signal — The script looks for a bar whose volume is both the highest of the last N bars and at least X times the average volume of those bars (both configurable). This filters out ordinary volume fluctuations and keeps only genuinely abnormal activity.
2. Confirmation — After a high-volume bar, the indicator waits for the first bar that closes in the opposite direction (there can be several same-direction bars in between).
3. Zone boundaries — The zone is built from two price levels: P, the furthest high/low reached between the bar right after the signal and the confirmation bar (the signal bar itself is excluded); and R, the nearest prior confirmed pivot high/low that goes beyond P.
4. Pivot-based R — R is only taken from genuine swing points: a bar whose high/low is the most extreme of a configurable number of bars on each side (left/right). This avoids anchoring the zone to a random nearby wick that isn't part of the actual price structure.
5. ATR-based filtering — Zones narrower than a configurable multiple of the ATR are discarded. Because ATR reflects the typical volatility of the current symbol and timeframe, this threshold automatically adapts across assets and timeframes without manual tuning.
6. Continuous tracking — Once formed, a zone is not discarded after being touched once. It stays on the chart and keeps being tracked indefinitely, since a broken support can later act as resistance (and vice versa) — a common real-world behavior this script is designed to visualize.
7. Visual break marker — When price closes beyond a zone's outer edge by a configurable ATR-based margin, the zone's color switches to a dashed gray to flag a possible break. The zone keeps extending afterward, since it may still be retested from the other side.
WHAT IT'S MADE OF
- Volume + candle-color logic to detect signal and confirmation bars
- A backward-only search (no lookahead) to compute each zone's two boundaries
- Confirmed-pivot detection so a zone's outer boundary reflects genuine price structure, not a random wick
- ATR-based, auto-adjusting filters for minimum zone width and break margin
- A rolling set of tracked zones (oldest removed first once the maximum is reached)
- Optional alerts for new zone formation and possible zone breaks
- An optional diagnostic mode with visual markers for tuning settings on a new symbol/timeframe
HOW TO USE IT
Add it to any chart with real volume data (stocks, futures, crypto on major exchanges). Blue boxes mark resistance zones, orange boxes mark support zones; a dashed gray box signals a possible break. Use the settings to adjust sensitivity (volume lookback/ratio, pivot left/right bars, ATR-based width and margin, max zones shown) to match the instrument and timeframe you're trading. If no zones appear, enable "Show diagnostics" to see exactly which filter is holding signals back.
NOTES
- Requires real volume data. Symbols/feeds without real volume (some forex/CFD feeds on certain timeframes) may not produce reliable signals.
- The "possible break" color change is a visual aid based on a fixed rule, not a guaranteed prediction — always confirm with your own price action analysis. Indicator
Advanced Market Structure & Glowing Wave Proindicator description and usage guide
overview
advanced market structure and glowing wave pro is an all in one technical analysis script designed to help traders identify key market structures, major pivot reversal zones, dynamic trend momentum, and key daily levels on pine script v6.
this tool combines several essential trading concepts into a single clean visual experience, including smart money concepts market structure, dynamic momentum wave fills, high probability consolidation detection, daily high low tracking, and equilibrium levels.
key features explained
market structure tracking bos and choch
the script automatically detects pivot highs and lows to plot break of structure bos and change of character choch lines. green dashed lines represent bullish structure breaks, while red dashed lines represent bearish structure breaks. this helps traders analyze market direction without cluttering the chart.
major swing buy and sell signals
signals are calculated based on major structural pivots to reduce noise and avoid false breakouts. buy tags appear near key structural swing lows, and sell tags appear near key structural swing highs. these signals act as visual alerts for potential trend reversals or continuation setups.
glowing wave line with dynamic background fill
the wave line uses a hull moving average engine to plot smooth trend direction. the background space between the wave line and price close fills dynamically with a semi-transparent green or red glow, allowing you to instantly visualize trend strength and price expansion without obscuring your price candles.
dynamic consolidation and high probability zones
using average true range calculations, the indicator detects tight consolidation phases where price compresses. during these phases, candle colors shift to neutral grey tones and a high probability zone box highlights potential breakout ranges.
previous day high and low pdh pdl
key institutional levels like the previous day high and previous day low are automatically drawn on the chart. once price breaks through a daily level, the corresponding line auto disappears to keep your workspace clean.
0.50 fibonacci equilibrium line
a stylized mid point equilibrium line is plotted based on the recent range. this acts as a quick reference for premium and discount price zones.
customizable info dashboard
an elegant on screen panel displays current market structure status, market phase expansion or consolidation, active signal state, and pending session news times.
how to use this indicator
step 1 identifying overall trend direction
check the direction and color of the glowing wave line along with the info panel market structure reading. green indicates bullish momentum, while red indicates bearish momentum.
step 2 monitoring structure breaks
look for choch signals for early signs of a trend shift, or bos signals for trend continuation confirmation.
step 3 waiting for major swing signals
watch for major buy or sell tags printed near major swing highs and lows. ensure the signal aligns with the broader market context and your personal trading strategy.
step 4 tracking daily key levels
use the pdh and pdl lines as potential liquidity target areas or bounce zones during intra day sessions.
Things to avoid
do not treat buy and sell signals as automated financial advice or direct entry triggers. always use proper risk management.
do not trade signals blindly during high impact economic news events or inside tight consolidation ranges.
do not rely solely on one indicator. integrate this tool into a comprehensive trading system that includes risk management and independent analysis.
house rules compliance and risk disclaimer
disclaimer
this script is created strictly for educational, informational, and chart analysis purposes only. it does not constitute financial, investment, or trading advice. past performance indicated by visual cues or structural breaks on historical data does not guarantee future results. trading foreign exchange, commodities, stocks, and crypto assets carries a high level of risk, and you may lose more than your initial investment. always conduct your own research and consult a licensed financial advisor before making trading decisions.
author note
if you find this tool helpful for your technical analysis, feel free to like the script, leave your feedback in the comments, and follow for future updates and tools. Indicator
Strong PWH PWL Zones | ProjectSyndicateStrong PWH PWL Zones
Strong PWH PWL Zones power-ranks the weekly levels that price keeps reacting to. For every week it plots the prior week's High, Low, Golden Pocket (the 50–61.8% retracement of the previous week's range) and Equilibrium as clean equal-height zones, then scores each High and Low 0–10 from measurable level quality — so you instantly know which previous-week level is likely to hold and which is likely to break. Where most PWH/PWL tools stop at drawing the level, this one tracks what price actually does to it: every extreme is followed through its full lifecycle from INTACT to SWEPT to ACCEPTED to FAILED BREAK, and the zone recolours as it goes. Anchor switchable between Weekly, Bi-Weekly and Monthly.
⬛ Core Framework
◾ Power-Ranking System (0–10) — every PWH and PWL earns a live grade from seven weighted factors: prior-week volume vs its baseline, range significance vs AWR, the rejection close (how far price closed off the extreme), distance from round numbers, isolation from recent weeks' extremes, stop-run context, and body-built extreme. Every weight is exposed and auto-normalised, so you can zero any factor you don't accept and the remaining ones rescale to fill the gap. Read the scoring provenance note below before you lean on the number.
◾ In-Zone Strength Labels — each level carries its grade inside the band: stars, the X.X/10 score, and a tier (FORMING → WEAK → MODERATE → STRONG → ELITE). Quality reads instantly without a separate panel.
◾ Previous Week Golden Pocket — the prior week's 50–61.8% fib zone, plotted automatically as the mean-reversion pocket where intraweek pullbacks so often stall.
◾ Equilibrium & Premium / Discount — the prior range's 50% line, with optional tinting of the premium and discount halves, so you always know which side of the weekly range you're trading from.
◾ Uniform AWR Zone Height — every zone (High, Low, Golden Pocket) is normalised to one identical AWR-based thickness, centred on its level, for a consistent look on any instrument.
◾ Period Separators — a full-height divider at the first bar of every anchor period, so each weekly block is visually bounded and you can never misread which week a level belongs to.
⬛ Level Lifecycle Engine
The heart of this build. A prior-week level isn't a static line — it has a life, and the state it's in tells you what to do with it.
▪️ INTACT — price has not resolved the level in either direction. ▪️ SWEPT — a wick pushed past the Sweep Trap line but the bar closed back inside the level. The stop-hunt happened and failed. ▪️ ACCEPTED — a close pushed beyond the Acceptance line. This is a real break, not a wick. ▪️ FAILED BREAK — price accepted beyond the level and then closed back inside it. Historically the highest-conviction reversal condition on the chart, and the one most tools never show you.
Each transition recolours the zone, retags its label, and prints an event marker on the bar that caused it. Twelve of the thirteen alerts are wired to these events, so you can be notified the moment a level changes character rather than hunting for it manually.
⬛ Weekly-Specific Layers
◾ Virgin Level Magnets — a prior-week extreme that the following week never traded into is unfilled business. It gets promoted to a persistent projection that survives the display cull and keeps reaching right until price finally tags it, then freezes at the tag bar so the interaction stays on the record. These are the levels price tends to travel back for.
◾ Sweep Trap & Acceptance Lines — two dashed levels above the PWH and two below the PWL. The amber Sweep Trap sits just beyond the level to mark the stop-hunt zone; the red Acceptance line sits further out to mark where a move becomes a genuine break rather than a wick. Both are fully offset-adjustable in AWR terms, and both feed the lifecycle engine directly — they are not decoration.
◾ Range Extension Targets — a measured continuation target projected beyond each extreme, sized from the prior week's own range, for when acceptance does hold.
◾ Opening Gap Tracking — the gap between the prior week's close and the new week's open, gated by a minimum AWR size so noise is ignored, with live fill tracking and a relabel the moment it closes.
⬛ Presentation & Control
◾ Strength-Shaded Fill — stronger levels render more opaque while weak ones stay faint, so the chart shows which levels carry weight before you read a single score.
◾ Score Filter — hide every level below a threshold so the chart only carries what earned its place. Purely visual: hidden levels are still tracked by the lifecycle engine, still fire alerts, and can still become magnets.
◾ Native Alerts (13) — zone touches for PWH, PWL and Golden Pocket; dedicated touches of STRONG (≥7/10) PWH and PWL; sweeps above PWH and below PWL; acceptance either side; failed breaks either side; virgin level tagged; opening gap filled.
◾ Fully Customisable — anchor period, scoring weights and normalisers, zone height, golden-pocket fib bounds, sweep/acceptance/extension offsets, separator style, magnet style and cap, gap threshold, colours, transparency, label text and size, and round-number step.
◾ Object-Budget Safe — at the heaviest setting (30 periods, every module on) the script draws well inside PulseWire's 500-object limits, so nothing silently drops off the left edge of your chart.
⬛ Scoring Provenance — read this before you trust the number
Being straight with you about what has and hasn't been measured, because the score is only useful if you know what's behind it.
▪️ Five factors carry directions validated on DAILY data across FX and metals datasets — volume, range significance, rejection close, round-number distance and isolation. In that work, low-scored daily levels reacted meaningfully less often than high-scored ones. ▪️ Those directions have not been re-validated on weekly ranges. They are carried into this build as a reasoned prior, not as a measured weekly edge. Weekly levels are a different animal — fewer samples, wider ranges, different participants — and the daily result is not a promise that it transfers. ▪️ Two factors are structural priors and have not been backtested at all. Stop-run context (a week that took out the previous week's extreme and closed back inside it) and body-built extreme (an extreme built by candle bodies rather than a lone wick) come from market-structure reasoning, not from a study. ▪️ This is why every weight is exposed. Set the two new factors to 0 for the validated-direction subset, or reweight anything you disagree with. The score rescales automatically.
⬛ Repainting — what locks and what doesn't
▪️ Level geometry and scores are non-repainting. They lock in from the completed prior period and never change. Zones span exactly one period and close cleanly at the boundary — no bleed into the next week. ▪️ Lifecycle states evaluate against live price. On the currently forming bar a state can advance and its marker print before the bar closes, and the state will not step back down if price retreats within that same bar. On all closed bars the states reflect actual closes. If you want state changes to be strictly close-confirmed, wait for the bar close before acting on a live transition.
⬛ Why this is different
Most "previous week high/low" tools draw three equal-weight lines and leave you to guess which one matters. This one grades each level from prior-week behaviour, then keeps watching it — so you're not only told which level is worth respecting, you're told what price has already done to it. A STRONG level still INTACT is a level to fade. The same level flipped to FAILED BREAK is a reversal already in progress. And a virgin magnet sitting above an untouched high is where price is likely to reach for next.
🚀 Apply to Gold (XAUUSD), Silver, Forex, Crypto and Indices. Use a chart timeframe below your chosen anchor — H1 to H4 suits the weekly anchor well. The script warns you on-chart if your chart timeframe isn't lower than the anchor, since it can't resolve intra-period behaviour otherwise.
⬛ How To Trade It — Three Approaches
The score decides which approach fits; the lifecycle state tells you when it's live.
1) Sweep → Failed Break → Reversal (fade the trap) — use on STRONG / ELITE levels (≥7)
Best when the PWH or PWL is rated STRONG or ELITE.
▪️ Wait for price to push through the previous-week level and tag the amber Sweep Trap line beyond it — the liquidity grab that takes stops. The zone turns to its SWEPT tone and a marker prints. ▪️ Look for failure to reach or hold the red Acceptance line — the move stalls inside the trap band and prints rejection back through the level. ▪️ Entry: on the reversal back inside the level (a close back below PWH / above PWL). ▪️ Stop: just beyond the Acceptance line — if price closes there, the trap thesis is wrong and it's a genuine break. ▪️ Targets: Equilibrium and the Golden Pocket first, then the opposite previous-week level. ▪️ Strongest variant: let the level go to ACCEPTED and then flip to FAILED BREAK. You give up the best price but you're trading a break that has already been rejected rather than anticipating one. Use the Failed break alerts for this.
2) Acceptance Breakout → Trade With the Move — use on WEAK / MODERATE levels
Best when the level is rated WEAK or MODERATE, or formed on low prior-week volume.
▪️ Wait for a decisive break that closes beyond the red Acceptance line on expanding volume — not a single wick. The zone turns to its ACCEPTED tone. ▪️ The Sweep Trap line being cleared and held is your confirmation it's a real break, not a stop-hunt. ▪️ Entry: in the direction of the break on the close beyond the Acceptance line, or on a retest of the broken level. ▪️ Stop: back inside the level, beyond the Golden Pocket. ▪️ Targets: the Range Extension Target, trailing as the move extends. ▪️ A broken PWH flips to support, a broken PWL flips to resistance — the old level often becomes the retest entry. Watch for FAILED BREAK: if it appears, the flip has failed and you're on the wrong side.
3) Virgin Magnet Targeting — a weekly-only play
▪️ Identify a virgin magnet — a prior-week extreme the following week never reached, still projecting right. ▪️ Treat it as a destination rather than an entry. It gives your approach-1 and approach-2 trades a logical target that is defined by unfinished business rather than by a fixed multiple. ▪️ Use the Virgin level tagged alert to know the moment the magnet is reached, which is often exactly where a completed move runs out of fuel.
Rule of thumb: ⭐ STRONG/ELITE → expect a reaction, trade the trap reversal. ⭐ WEAK/MODERATE on volume → expect follow-through, trade the acceptance break. ⭐ FAILED BREAK → the market has already told you; trade the rejection.
⚠️ IMPORTANT NOTICE: This indicator identifies previous-week levels, grades them, and frames trap vs breakout scenarios. It should NOT be used as a standalone signal for entering trades. Five of the seven scoring factors carry directions validated on daily data and re-validated on nothing; two are untested structural priors. Always combine this tool with your own strategy, price-action analysis and risk management to confirm setups. Past statistical behaviour does not guarantee future results. Indicator
Indicator
Pivot Sniper Method [trade_w_samet]🎯 Pivot Sniper Method
Pivot Sniper Method is a confirmed pivot-reversal, signal-quality, session-filtering, trade-mapping, alert, and loaded-history statistics indicator designed to convert confirmed price pivots into a structured chart-review workflow.
The script is built around one central idea:
Not every confirmed pivot should be treated as an equal-quality reversal setup.
Instead of displaying every pivot as an identical signal, Pivot Sniper Method evaluates each confirmed pivot through a five-part Signal Strength model, applies the selected directional and session rules, maps a complete Entry / Stop Loss / TP1 / TP2 / TP3 structure, manages optional Break-Even behavior, and records the result through an internal R-based tracker.
When an eligible pivot is confirmed, the script can:
• Display a confirmed BUY or SELL label
• Show the calculated Signal Strength percentage directly below the direction label
• Evaluate Pivot Distance, Wick Quality, Confirmation Candle, Volume Participation, and Trend Alignment
• Apply Bullish, Bearish, or Both directional bias
• Restrict new signals to London, New York, London + New York, All Sessions, or a Custom session
• Apply an adjustable signal cooldown
• Calculate the Entry at the confirmation-candle close
• Calculate Stop Loss using ATR, Pivot Level, Pivot + ATR Buffer, or Signal Candle
• Calculate independently adjustable TP1, TP2, and TP3 targets
• Move the active Stop Loss to Break-Even after TP1 or TP2
• Add an optional favorable Break-Even tick offset
• Replace the current active tracked trade when a new eligible signal appears
• Display active Entry, Stop / Break-Even, TP1, TP2, and TP3 lines and labels
• Remove the separate Entry line and label after Break-Even becomes active
• Display compact tooltips containing signal, price, risk, target, and status information
• Track Trades, Win Rate, NET R, Average R, TP1 / TP2 / TP3 hit rates, and Break-Even results
• Display a compact premium desktop dashboard
• Display a reduced Phone Mode dashboard
• Move the dashboard to any chart corner
• Support Auto, Dark, Light, and Phone visual modes
• Support static alertcondition() events
• Support one combined “Any alert() function call” workflow
• Include symbol, timeframe, strength, Entry, Stop, targets, Stop Loss mode, Break-Even mode, and session context in dynamic alerts
The purpose of the script is to provide a transparent framework for studying confirmed pivots, setup quality, session context, predefined risk, multiple reward targets, Break-Even behavior, and bar-based historical outcomes.
It is not financial advice.
It is not an automated trading system.
It does not execute broker orders.
It does not calculate position size.
It does not guarantee that a confirmed pivot will produce a reversal.
It does not guarantee that historical Win Rate or NET R will continue in future market conditions.
It does not include spread, commission, slippage, latency, financing, taxes, partial fills, or broker-specific execution.
It does not reconstruct the exact intrabar path inside historical candles.
━━━━━━━━━━━━━━━━━━━━━━
📌 OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━
At a high level, Pivot Sniper Method performs the following sequence:
• Searches price for confirmed pivot lows and pivot highs.
• Requires the selected number of completed candles on the right side of a pivot.
• Rejects simultaneous bullish and bearish pivot confirmation on the same calculation.
• Evaluates the selected Trend Bias.
• Evaluates the selected Trading Session.
• Evaluates the signal cooldown.
• Calculates a 0–100 Signal Strength score.
• Rejects signals below the selected minimum strength when the strength filter is enabled.
• Displays a BUY or SELL label only when all active signal rules pass.
• Opens a tracked trade at the close of the confirmation candle.
• Selects a Stop Loss using the active Stop Loss Mode.
• Uses ATR as a safety fallback when a structural Stop Loss is invalid.
• Calculates TP1, TP2, and TP3 from the actual Entry-to-Stop risk distance.
• Tracks target and stop touches from the candle after entry.
• Moves the active Stop Loss to Break-Even after the selected target condition.
• Replaces an active tracked trade at the current close when a new eligible signal appears.
• Records each completed trade in R.
• Updates a compact dashboard with state, trade, performance, and quality information.
• Generates static and dynamic PulseWire alert events.
The script does not use machine learning.
It does not claim to predict every market reversal.
Its dashboard is not PulseWire Strategy Tester.
Its statistics are calculated internally from the script’s own confirmed-signal, OHLC-touch, replacement-exit, and Break-Even rules.
━━━━━━━━━━━━━━━━━━━━━━
🧠 CORE IDEA
━━━━━━━━━━━━━━━━━━━━━━
A pivot low identifies a price point that is lower than the selected number of candles on both sides.
A pivot high identifies a price point that is higher than the selected number of candles on both sides.
Confirmed pivots can provide useful reversal context, but a pivot alone does not answer:
• whether the setup agrees with the selected directional bias
• whether the setup occurs during the selected trading session
• whether the pivot candle contains a meaningful rejection wick
• whether price has moved sufficiently away from the confirmed pivot
• whether the confirmation candle supports the intended direction
• whether volume participation is elevated or ordinary
• whether price and the selected EMA structure support the direction
• where Stop Loss should be placed
• how the trade should be mapped in R
• when Break-Even should become active
• how a new signal should affect an existing tracked trade
• how the setup behaved under the script’s historical bar-touch rules
Pivot Sniper Method therefore treats the pivot as the first stage of a complete process rather than the final decision.
The complete workflow is:
potential pivot
→ right-side pivot confirmation
→ same-bar conflict rejection
→ directional-bias validation
→ session validation
→ cooldown validation
→ five-part quality scoring
→ minimum-strength validation
→ BUY or SELL signal
→ confirmation-candle Entry
→ Stop Loss selection
→ TP1 / TP2 / TP3 mapping
→ active-trade management
→ optional Break-Even
→ TP3, Stop, Break-Even, or replacement exit
→ internal R result
→ dashboard update
→ alert event
━━━━━━━━━━━━━━━━━━━━━━
🧩 WHY THIS IS NOT A SIMPLE PIVOT MARKER
━━━━━━━━━━━━━━━━━━━━━━
A basic pivot script can stop after placing a shape on a confirmed swing high or swing low.
Pivot Sniper Method continues beyond pivot detection.
Each eligible setup passes through a coordinated structure:
confirmed price pivot
→ 0–100 quality evaluation
→ bias and session permission
→ structured Entry
→ selectable Stop Loss model
→ independent TP1, TP2, and TP3 targets
→ optional Break-Even transition
→ live target-status updates
→ active-trade replacement logic
→ historical R accounting
→ compact statistics dashboard
→ static and dynamic alerts
The pivot module defines the confirmed reversal location.
The Signal Strength module evaluates quality.
The Trend Bias module controls permitted directions.
The Time Filter controls when new setups may be accepted.
The trade-mapping module converts the setup into explicit price levels.
The Break-Even module changes active risk only after the selected target is confirmed.
The statistics module summarizes the exact results produced by those rules.
The alert module communicates signal and trade-management events.
These modules are not unrelated indicators placed together.
They form one process for identifying, filtering, mapping, monitoring, and reviewing confirmed pivot-reversal setups.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ HOW THE SCRIPT WORKS
━━━━━━━━━━━━━━━━━━━━━━
The script runs directly on the main price chart.
It calculates confirmed price pivots using independently adjustable left-side and right-side lengths for highs and lows.
The default pivot configuration is:
• Pivot High Left Bars: 10
• Pivot High Right Bars: 10
• Pivot Low Left Bars: 10
• Pivot Low Right Bars: 10
The signal engine then combines:
• confirmed pivot status
• Bullish / Bearish / Both bias permission
• selected session permission
• Signal Strength threshold
• cooldown permission
• same-bar dual-pivot rejection
• confirmed chart-bar status
A BUY signal is based on a confirmed pivot low.
A SELL signal is based on a confirmed pivot high.
The signal label is placed on the confirmation candle, not on the original historical pivot candle.
The Entry is also stored at the close of the confirmation candle.
This separation is important:
Pivot Price
The historical swing level that became confirmed after the selected right-side bars.
Signal Candle
The later candle where the script knows the pivot exists and all active filters pass.
Entry Price
The close of that later signal-confirmation candle.
━━━━━━━━━━━━━━━━━━━━━━
🔍 PIVOT DETECTION MODEL
━━━━━━━━━━━━━━━━━━━━━━
Pivot High Left Bars determines how many candles to the left must have lower highs than a potential pivot high.
Pivot High Right Bars determines how many completed candles must form to the right before the potential pivot high is confirmed.
Pivot Low Left Bars determines how many candles to the left must have higher lows than a potential pivot low.
Pivot Low Right Bars determines how many completed candles must form to the right before the potential pivot low is confirmed.
Higher left and right values generally identify larger and less frequent swing structures.
Lower values generally identify smaller and more frequent structures.
The high and low settings are independent.
This allows users to study symmetrical configurations such as 10 / 10 for both directions, or asymmetrical configurations when market behavior requires different sensitivity for pivot highs and pivot lows.
The central pivot calculation is:
float confirmedPivotHigh = ta.pivothigh(
high,
leftHighInput,
rightHighInput
)
float confirmedPivotLow = ta.pivotlow(
low,
leftLowInput,
rightLowInput
)
bool rawBuySignal =
barstate.isconfirmed and
not na(confirmedPivotLow)
bool rawSellSignal =
barstate.isconfirmed and
not na(confirmedPivotHigh)
These functions return a confirmed pivot value only after the required right-side bars exist.
A confirmed pivot does not automatically become a signal.
It must still pass:
• same-bar conflict rejection
• Trend Bias
• Trading Session
• Signal Strength
• cooldown
━━━━━━━━━━━━━━━━━━━━━━
⏳ PIVOT CONFIRMATION AND SIGNAL TIMING
━━━━━━━━━━━━━━━━━━━━━━
This section is essential for correct interpretation.
The script uses confirmed pivot functions.
A pivot is not known on the original pivot candle.
For example, with Pivot Low Right Bars set to 10:
• the potential pivot low occurs
• ten additional candles must complete to its right
• the pivot becomes confirmed on the later calculation candle
• the BUY candidate can then be evaluated
The signal label is displayed on the later confirmation candle.
The trade Entry is stored at the close of that confirmation candle.
The script does not backdate the BUY or SELL trade label to the original pivot candle.
This means:
• the pivot price belongs to an earlier historical candle
• the signal becomes available later
• the displayed Entry reflects the later confirmation close
• increasing right-side bars increases confirmation delay
• decreasing right-side bars confirms smaller structures earlier
The script also requires barstate.isconfirmed for raw pivot candidates.
Signals are therefore based on completed chart candles.
This reduces unfinished current-candle changes, but it does not remove the inherent delay required by pivot confirmation.
━━━━━━━━━━━━━━━━━━━━━━
🟢 CONFIRMED BUY LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A BUY candidate begins when a pivot low is confirmed.
The candidate is rejected when a pivot high is also confirmed on the same calculation.
The remaining BUY candidate must satisfy:
• Trend Bias is Bullish or Both
• the selected Trading Session is active
• the BUY Signal Strength meets the minimum threshold when filtering is enabled
• the cooldown is ready
• the chart bar is confirmed
When accepted, the script displays:
▲ BUY
strength%
The strength percentage appears on the second line to keep the label compact.
The compact two-line BUY label is constructed as:
string buyLabelText =
showStrengthOnSignalInput
? "▲ BUY " + str.tostring(buySignalStrength) + "%"
: "▲ BUY"
The SELL label uses the mirrored ▼ SELL format.
The label is placed below the signal candle.
The BUY tooltip can display:
• Confirmed BUY
• Signal Strength
• Confirmed Pivot price
The tracked Entry is the signal-confirmation candle close.
The BUY Stop Loss is placed below Entry using the selected Stop Loss Mode.
TP1, TP2, and TP3 are calculated above Entry from the actual Entry-to-Stop risk distance.
━━━━━━━━━━━━━━━━━━━━━━
🔴 CONFIRMED SELL LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A SELL candidate begins when a pivot high is confirmed.
The candidate is rejected when a pivot low is also confirmed on the same calculation.
The remaining SELL candidate must satisfy:
• Trend Bias is Bearish or Both
• the selected Trading Session is active
• the SELL Signal Strength meets the minimum threshold when filtering is enabled
• the cooldown is ready
• the chart bar is confirmed
When accepted, the script displays:
▼ SELL
strength%
The strength percentage appears on the second line.
The label is placed above the signal candle.
The SELL tooltip can display:
• Confirmed SELL
• Signal Strength
• Confirmed Pivot price
The tracked Entry is the signal-confirmation candle close.
The SELL Stop Loss is placed above Entry using the selected Stop Loss Mode.
TP1, TP2, and TP3 are calculated below Entry from the actual Entry-to-Stop risk distance.
━━━━━━━━━━━━━━━━━━━━━━
💪 SIGNAL STRENGTH MODEL
━━━━━━━━━━━━━━━━━━━━━━
Signal Strength is a 0–100 quality score.
The final score contains five components worth up to 20 points each:
1. Pivot Distance
2. Wick Quality
3. Confirmation Candle
4. Volume Participation
5. Trend Alignment
The score is intended to compare the internal characteristics of confirmed pivot setups under the same script rules.
It is not a probability forecast.
A 75% label does not mean there is a guaranteed 75% probability of profit.
It means the setup received 75 points out of the script’s 100-point quality model.
The Minimum Signal Strength input controls the required score.
Default:
55
When the filter is enabled:
• scores below the minimum are rejected
• scores equal to or above the minimum are eligible
• lower thresholds generally create more signals
• higher thresholds generally create fewer signals
The strength percentage can be hidden from the BUY / SELL label without disabling the strength filter.
The five component values are combined into the final score:
int buySignalStrength = int(math.round(
math.min(
buyPivotDistanceScore +
buyWickScore +
buyCandleScore +
volumeScore +
buyTrendScore,
100.0
)
))
int sellSignalStrength = int(math.round(
math.min(
sellPivotDistanceScore +
sellWickScore +
sellCandleScore +
volumeScore +
sellTrendScore,
100.0
)
))
A score is therefore the sum of five internal measurements, capped at 100.
━━━━━━━━━━━━━━━━━━━━━━
📏 PIVOT DISTANCE COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Pivot Distance evaluates how far the confirmation-candle close is from the confirmed pivot relative to ATR.
For BUY candidates, the model measures the distance from the confirmed pivot low to the current close.
For SELL candidates, it measures the distance from the current close to the confirmed pivot high.
The normalized value is capped internally.
The maximum contribution is 20 points.
This component does not claim that a larger distance is always better.
It only measures the amount of price separation used by this quality model.
━━━━━━━━━━━━━━━━━━━━━━
🕯️ WICK QUALITY COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Wick Quality evaluates the rejection wick on the original pivot candle.
For BUY candidates:
• lower wick size is compared with the full pivot-candle range
For SELL candidates:
• upper wick size is compared with the full pivot-candle range
A larger relevant wick can contribute more points, up to 20.
This component attempts to represent rejection behavior at the confirmed swing.
A large wick does not guarantee reversal continuation.
━━━━━━━━━━━━━━━━━━━━━━
📊 CONFIRMATION CANDLE COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
The Confirmation Candle component evaluates the candle where the pivot becomes confirmed and the signal is processed.
The model considers:
• body size relative to the full candle range
• bullish close direction for BUY candidates
• bearish close direction for SELL candidates
The body ratio contributes most of the component score.
A directional close can add an additional internal bonus.
The maximum contribution is 20 points.
The confirmation candle is not the original pivot candle.
━━━━━━━━━━━━━━━━━━━━━━
🔊 VOLUME PARTICIPATION COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Volume Participation compares current volume with an adjustable volume average.
Default volume length:
20
Higher relative volume can contribute more points, up to 20.
The component is internally capped.
When usable volume data is unavailable, the script applies a neutral fallback contribution instead of automatically assigning zero.
Volume behavior differs across asset classes and data feeds.
For some symbols, displayed volume can represent exchange volume.
For others, it can represent tick activity or a provider-specific value.
━━━━━━━━━━━━━━━━━━━━━━
📈 TREND ALIGNMENT COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Trend Alignment uses an adjustable EMA.
Default EMA length:
50
For BUY candidates, the component evaluates:
• whether price is above the EMA
• whether the EMA is rising
For SELL candidates, it evaluates:
• whether price is below the EMA
• whether the EMA is falling
Each condition contributes part of the 20-point component.
This EMA is used as one component of Signal Strength.
It is not a separate hard directional filter.
A setup can still receive points from the other four components when Trend Alignment is weak.
━━━━━━━━━━━━━━━━━━━━━━
🧭 TREND BIAS
━━━━━━━━━━━━━━━━━━━━━━
Trend Bias controls which signal directions are permitted.
Available modes:
• Bullish
• Bearish
• Both
Bullish
Allows only confirmed BUY signals.
Bearish
Allows only confirmed SELL signals.
Both
Allows confirmed signals in both directions.
Trend Bias does not change pivot detection.
It changes which confirmed candidates are allowed to become signals and tracked trades.
The final signal gate combines pivot confirmation, directional permission, session permission, Signal Strength, and cooldown:
bool buySignal =
buyCandidate and
bullishBiasAllowed and
timeFilterPassed and
buyStrengthPassed and
cooldownReady
bool sellSignal =
sellCandidate and
bearishBiasAllowed and
timeFilterPassed and
sellStrengthPassed and
cooldownReady
Only candidates that pass every active condition become BUY or SELL signals.
━━━━━━━━━━━━━━━━━━━━━━
🕒 SESSION FILTER
━━━━━━━━━━━━━━━━━━━━━━
The Trading Session input controls when new signals can be accepted.
Available modes:
• All Sessions
• London
• New York
• London + New York
• Custom
London uses:
08:00–17:00
Europe/London time
New York uses:
09:30–16:00
America/New_York time
London + New York accepts signals during either defined session.
Custom allows the user to define a session and select:
• Exchange
• UTC
• Europe/London
• America/New_York
• Europe/Istanbul
• Asia/Tokyo
The session filter affects new entries only.
An already active tracked trade continues to be managed outside the selected session.
The dashboard displays whether the current session rule is OPEN or CLOSED.
━━━━━━━━━━━━━━━━━━━━━━
⏳ COOLDOWN AND CONFLICT HANDLING
━━━━━━━━━━━━━━━━━━━━━━
Signal Cooldown Bars defines the minimum number of completed candles required between accepted signals.
Default:
0
A value of 0 disables additional cooldown filtering.
Higher values reduce how frequently new signals can be accepted.
When a pivot high and pivot low are both confirmed on the same calculation, the script rejects both candidates.
This prevents contradictory BUY and SELL signals from being accepted on the same candle.
━━━━━━━━━━━━━━━━━━━━━━
🎯 ENTRY AND ACTIVE-TRADE REPLACEMENT MODEL
━━━━━━━━━━━━━━━━━━━━━━
The Entry is stored at the close of the accepted signal candle.
The script maintains one active tracked trade.
However, new eligible signals are not ignored while a trade is active.
When a new eligible BUY or SELL signal appears:
• the current active trade is valued at the new signal candle’s close
• its current R result is added to statistics
• its active lines and labels are removed
• the new signal opens a new tracked trade
This behavior applies to eligible same-direction and opposite-direction signals.
The replacement exit is not a broker fill.
It is an internal close-based accounting rule used to keep only one active tracked trade.
Because replacement exits can occur before TP3, Stop Loss, or Break-Even, NET R can include partial positive or negative R outcomes.
━━━━━━━━━━━━━━━━━━━━━━
🛑 STOP LOSS SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes four Stop Loss modes:
• ATR
• Pivot Level
• Pivot + ATR Buffer
• Signal Candle
ATR
BUY:
Entry − ATR × multiplier
SELL:
Entry + ATR × multiplier
Default ATR length:
14
Default ATR multiplier:
2.0
Pivot Level
BUY:
confirmed pivot low
SELL:
confirmed pivot high
Pivot + ATR Buffer
BUY:
confirmed pivot low − ATR × pivot buffer
SELL:
confirmed pivot high + ATR × pivot buffer
Default pivot buffer:
0.25 ATR
Signal Candle
BUY:
signal candle low
SELL:
signal candle high
The script validates the selected Stop Loss.
For BUY, Stop Loss must be meaningfully below Entry.
For SELL, Stop Loss must be meaningfully above Entry.
When the selected structural stop is invalid, the script uses the ATR Stop Loss as a safety fallback.
The actual risk distance is:
absolute difference between Entry and the validated Stop Loss
That distance becomes 1R for all target calculations.
The requested Stop Loss is selected from the active mode:
requestedStopPrice :=
stopLossModeInput == "ATR"
? activeEntryPrice - atrFallbackDistance
: stopLossModeInput == "Pivot Level"
? confirmedPivotLow
: stopLossModeInput == "Pivot + ATR Buffer"
? confirmedPivotLow - atrValue * pivotBufferATRInput
: low
For SELL trades, the same logic is mirrored above Entry.
The script then validates the requested structural stop.
When the selected price is not on the correct side of Entry, ATR is used as the fallback.
━━━━━━━━━━━━━━━━━━━━━━
🏆 TP1 / TP2 / TP3 SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
TP1, TP2, and TP3 are independently adjustable.
Default values:
• TP1: 1R
• TP2: 2R
• TP3: 3R
For BUY:
target = Entry + risk distance × selected R multiple
For SELL:
target = Entry − risk distance × selected R multiple
TP1 and TP2 are intermediate target events.
TP3 is the final target and closes the active tracked trade.
When TP3 is touched:
• TP1 is also recorded if it was not already recorded
• TP2 is also recorded if it was not already recorded
• TP3 is recorded
• the trade closes at the selected TP3 R value
Users should normally keep:
TP1 < TP2 < TP3
The script allows independent values, so users are responsible for maintaining a logical target sequence.
After the validated Stop Loss is stored, the script defines 1R and calculates each target:
activeRiskDistance :=
math.max(
math.abs(activeEntryPrice - activeStopPrice),
syminfo.mintick
)
activeTP1Price :=
activeTradeDirection == 1
? activeEntryPrice + activeRiskDistance * tp1RRInput
: activeEntryPrice - activeRiskDistance * tp1RRInput
activeTP2Price :=
activeTradeDirection == 1
? activeEntryPrice + activeRiskDistance * tp2RRInput
: activeEntryPrice - activeRiskDistance * tp2RRInput
activeTP3Price :=
activeTradeDirection == 1
? activeEntryPrice + activeRiskDistance * tp3RRInput
: activeEntryPrice - activeRiskDistance * tp3RRInput
The target calculations therefore remain proportional to the actual Entry-to-Stop distance.
━━━━━━━━━━━━━━━━━━━━━━
🟡 BREAK-EVEN SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
Break-Even Mode includes:
• Off
• After TP1
• After TP2
After TP1
The Stop Loss moves to Entry after the TP1-touch candle closes.
After TP2
The Stop Loss moves to Entry after the TP2-touch candle closes.
The updated Break-Even stop applies from the following candle.
An optional favorable tick offset can be added.
For BUY:
Break-Even = Entry + offset
For SELL:
Break-Even = Entry − offset
When Break-Even becomes active:
• the Stop Loss line changes to the Break-Even color
• the Stop label changes from SL to BE
• the separate Entry line is deleted
• the separate Entry label is deleted
• only the BE level remains at or near Entry
This prevents Entry and Break-Even labels from overlapping at the same price.
A Break-Even stop with zero offset produces approximately 0R.
A positive favorable offset can produce a small positive R result.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ SAME-CANDLE STOP AND TARGET HANDLING
━━━━━━━━━━━━━━━━━━━━━━
Historical OHLC candles do not reveal the exact sequence of all intrabar price movement.
A candle can include both the active Stop price and one or more target prices.
When the active Stop and a target are both touched inside the same historical candle, the script uses a conservative rule:
The active Stop receives priority.
This applies to the original Stop Loss and the active Break-Even stop.
Trade-management checks begin on the candle after Entry.
The Entry candle cannot immediately close the new tracked trade.
The conservative priority rule can produce different results from lower-timeframe reconstruction or tick-level execution data.
━━━━━━━━━━━━━━━━━━━━━━
📐 ACTIVE TRADE VISUAL SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
While a tracked trade is active, the script can display:
• Stop Loss or Break-Even line
• Entry line
• TP1 line
• TP2 line
• TP3 line
• Stop Loss or Break-Even label
• Entry label
• TP1 label
• TP2 label
• TP3 label
The lines project to the right by the selected number of bars.
Default:
20 bars
Stop and Entry use solid lines.
Targets use dashed lines.
After TP1 or TP2 is reached:
• the corresponding target label changes to a completed state
• the corresponding line becomes more transparent
After Break-Even activates:
• the Entry line and Entry label disappear
• the active Stop line and label become BE
When the trade closes or is replaced:
• active trade lines are deleted
• active trade labels are deleted
The script does not preserve completed trade lines as permanent historical drawings.
━━━━━━━━━━━━━━━━━━━━━━
🏷️ LABELS, TOOLTIPS, AND TEXT
━━━━━━━━━━━━━━━━━━━━━━
BUY and SELL labels use two lines when strength display is enabled:
direction
strength%
Available Label Size values:
• Tiny
• Small
• Normal
• Large
• Huge
The setting controls:
• BUY
• SELL
• Entry
• Stop Loss
• Break-Even
• TP1
• TP2
• TP3
Phone Mode overrides the selected label size with Tiny.
Visible chart labels use bold and italic formatting.
Signal tooltips can show:
• direction
• strength
• pivot price
Trade-level tooltips can show:
• Entry strength
• risk distance
• Stop Loss mode
• Stop or BE price
• target R value
• target price
• target status
• Break-Even tick offset
Tooltips are informational chart elements.
They do not represent broker orders.
━━━━━━━━━━━━━━━━━━━━━━
📟 COMPACT PREMIUM DASHBOARD
━━━━━━━━━━━━━━━━━━━━━━
The desktop dashboard is divided into four sections:
STATE
• symbol and timeframe
• active signal and strength
• current trade status
• session status
TRADE
• active Stop Loss mode
• Entry and Stop / Break-Even
• TP1 / TP2 / TP3 scale
• live R
PERFORMANCE
• total trades started
• closed trades
• Win Rate
• NET R
• Average R
• TP1 / TP2 / TP3 hit rates
QUALITY
• latest strength
• Trend component
• Volume component
• Wick component
• Confirmation Candle component
• Pivot Distance component
• Trend Bias
• Break-Even mode
• Minimum Strength
Quality components are displayed in a compact format:
T = Trend
V = Volume
W = Wick
C = Candle
P = Pivot Distance
The dashboard can be positioned at:
• Top Right
• Bottom Right
• Top Left
• Bottom Left
The selected input is translated into a PulseWire table position:
string dashboardTablePosition =
dashboardPositionInput == "Top Right" ? position.top_right :
dashboardPositionInput == "Top Left" ? position.top_left :
dashboardPositionInput == "Bottom Left" ? position.bottom_left :
position.bottom_right
if barstate.islast
table.set_position(
statisticsTable,
dashboardTablePosition
)
━━━━━━━━━━━━━━━━━━━━━━
📊 STATISTICS METHODOLOGY
━━━━━━━━━━━━━━━━━━━━━━
The statistics are produced by the script’s internal bar-based tracker.
They are not imported from a broker.
They are not verified account results.
They are not PulseWire Strategy Tester results.
Total Trades Started
Number of accepted signals that opened a tracked trade.
Total Trades Closed
Number of tracked trades closed by:
• Stop Loss
• Break-Even
• TP3
• active-trade replacement
TP1 Hit Rate
TP1 touches divided by Total Trades Started.
TP2 Hit Rate
TP2 touches divided by Total Trades Started.
TP3 Hit Rate
TP3 touches divided by Total Trades Started.
NET R
Sum of all recorded closed-trade R outcomes.
Average R
NET R divided by Total Trades Closed.
Win Rate
Positive-R trades divided by positive-R plus negative-R trades.
Exact 0R Break-Even results are excluded from the Win Rate denominator.
A favorable Break-Even offset can produce a small positive R result and can therefore be classified as a positive-R trade.
Replacement exits use the close of the new signal candle and can contribute partial R.
Statistics depend on:
• loaded chart history
• symbol
• timeframe
• exchange or broker feed
• left and right pivot settings
• Trend Bias
• session setting
• cooldown
• strength threshold
• EMA and volume lengths
• ATR settings
• Stop Loss mode
• target settings
• Break-Even settings
• replacement-signal sequence
Changing any of these inputs can change historical results.
━━━━━━━━━━━━━━━━━━━━━━
🎨 THEME SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes:
• Auto
• Dark Mode
• Light Mode
• Phone Mode
Auto
Detects the chart background and selects the corresponding light or dark visual palette.
Dark Mode
Uses:
• darker green and red signal colors
• dark dashboard surfaces
• white chart-label text
• dark Entry color
• muted dashboard text
• red brand header
Light Mode
Uses:
• brighter green and red signal colors
• light dashboard surfaces
• dark BUY text where required
• adjusted Entry and dashboard colors
• red brand header
Theme selection changes presentation.
It does not change pivot detection, Signal Strength, trade levels, statistics, or alerts.
━━━━━━━━━━━━━━━━━━━━━━
📱 PHONE MODE
━━━━━━━━━━━━━━━━━━━━━━
Phone Mode is designed for smaller chart areas.
It uses:
• Tiny signal labels
• Tiny active-trade labels
• one-pixel trade-level lines
• dark visual palette
• compact dashboard text
• reduced dashboard rows
The Phone Mode dashboard displays:
• Signal and Strength
• Status
• Win Rate and NET R
• Session
The compact layout intentionally removes most desktop details.
Phone Mode changes presentation only.
It does not change calculations.
━━━━━━━━━━━━━━━━━━━━━━
🚨 ALERT SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes static PulseWire alert conditions for:
• Confirmed BUY
• Confirmed SELL
• Stop Loss Hit
• Break-Even Activated
• Break-Even Hit
• TP1 Hit
• TP2 Hit
• TP3 Hit
Static BUY and SELL messages can include:
• exchange
• ticker
• timeframe
• Signal Strength
• Entry
• Stop
• TP1
• TP2
• TP3
The script also includes dynamic alert() events for:
• BUY signal
• SELL signal
• Stop Loss hit
• Break-Even activation
• Break-Even hit
• TP1 hit
• TP2 hit
• TP3 hit
Dynamic signal messages can include:
• trade_w_samet identifier
• event type
• direction
• symbol
• timeframe
• Signal Strength
• Entry
• Stop
• TP1
• TP2
• TP3
• Stop Loss Mode
• Break-Even Mode
• Trading Session
• session OPEN / CLOSED state
Dynamic trade-management messages preserve the active trade’s stored values before the trade state is reset.
Alert events use once-per-bar-close frequency.
A dynamic signal message is assembled from the stored trade values:
string buyEntryAlertMessage =
"trade_w_samet | Pivot Sniper Method" +
" Event: BUY SIGNAL" +
" Direction: BUY" +
" Symbol: " + syminfo.tickerid +
" Timeframe: " + timeframe.period +
" Strength: " + str.tostring(buySignalStrength) + "%" +
" Entry: " + str.tostring(activeEntryPrice, format.mintick) +
" SL: " + str.tostring(activeStopPrice, format.mintick) +
" TP1: " + str.tostring(activeTP1Price, format.mintick) +
" TP2: " + str.tostring(activeTP2Price, format.mintick) +
" TP3: " + str.tostring(activeTP3Price, format.mintick)
alert(
message=buyEntryAlertMessage,
freq=alert.freq_once_per_bar_close
)
The complete live message also includes Stop Loss Mode, Break-Even Mode, and session context.
Alerts are monitoring tools.
They do not execute or modify broker orders.
━━━━━━━━━━━━━━━━━━━━━━
🔔 HOW TO USE ALERTS
━━━━━━━━━━━━━━━━━━━━━━
For a specific static event:
1. Add Pivot Sniper Method to the chart.
2. Open PulseWire’s Create Alert window.
3. Select the indicator as the condition.
4. Select the required BUY, SELL, Stop, Break-Even, TP1, TP2, or TP3 event.
5. Select the notification method.
6. Test the alert before relying on it.
For one combined dynamic workflow:
1. Add the indicator to the chart.
2. Open Create Alert.
3. Select Pivot Sniper Method .
4. Select Any alert() function call.
5. Configure the delivery method.
6. Test signal and trade-management messages.
PulseWire saves a snapshot of the script, its inputs, and chart context when an alert is created.
After materially changing the script, symbol, timeframe, or inputs, delete and recreate the alert so it uses the intended configuration.
━━━━━━━━━━━━━━━━━━━━━━
🧪 PRACTICAL WORKFLOW
━━━━━━━━━━━━━━━━━━━━━━
A practical review process:
1. Add Pivot Sniper Method to a standard candlestick chart.
2. Select Auto, Dark, Light, or Phone Mode.
3. Start with symmetrical pivot settings.
4. Observe how right-side bars affect confirmation delay.
5. Select Both Trend Bias when studying raw signal behavior.
6. Select Bullish or Bearish when reviewing one direction only.
7. Begin with All Sessions when studying general behavior.
8. Test London, New York, or Custom session filtering.
9. Begin with the default Minimum Signal Strength.
10. Compare signal frequency at higher and lower thresholds.
11. Review the strength percentage below each BUY or SELL label.
12. Use the tooltip to inspect the confirmed pivot price.
13. Compare the five quality components in the dashboard.
14. Select the preferred Stop Loss Mode.
15. Verify that the structural stop is logically positioned.
16. Review the ATR fallback behavior.
17. Set TP1, TP2, and TP3 in increasing order.
18. Select the Break-Even rule.
19. Review when the Entry label disappears and BE replaces it.
20. Observe how new eligible signals replace an active tracked trade.
21. Review Live R and historical NET R.
22. Review failed setups as well as successful setups.
23. Create and test alerts.
24. Define personal position size independently.
25. Account for spread, commission, liquidity, news, and execution conditions.
The indicator is designed for structured study and monitoring.
It should not be treated as an automatic decision-maker.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ SETTINGS REFERENCE
━━━━━━━━━━━━━━━━━━━━━━
📈 Trend Bias
Trend Bias
• Bullish
• Bearish
• Both
━━━━━━━━━━━━━━━━━━━━━━
⚙️ Pivot Settings
Pivot High Left Bars
Default:
10
Pivot High Right Bars
Default:
10
Pivot Low Left Bars
Default:
10
Pivot Low Right Bars
Default:
10
━━━━━━━━━━━━━━━━━━━━━━
🚨 Signal Settings
Show BUY / SELL Signals
Shows or hides signal labels.
Signal Cooldown Bars
Default:
0
━━━━━━━━━━━━━━━━━━━━━━
🕒 Time Filter
Trading Session
• All Sessions
• London
• New York
• London + New York
• Custom
Custom Session
Default:
08:00–17:00
Custom Session Time Zone
• Exchange
• UTC
• Europe/London
• America/New_York
• Europe/Istanbul
• Asia/Tokyo
━━━━━━━━━━━━━━━━━━━━━━
💪 Signal Strength
Enable Signal Strength Filter
Default:
On
Minimum Signal Strength
Default:
55
Show Strength on Signal
Default:
On
Strength Trend Length
Default:
50
Strength Volume Length
Default:
20
━━━━━━━━━━━━━━━━━━━━━━
📦 Trade Levels
Show Active Trade Levels
Default:
On
Stop Loss Mode
• ATR
• Pivot Level
• Pivot + ATR Buffer
• Signal Candle
ATR Length
Default:
14
Stop Loss ATR Multiplier
Default:
2.0
Pivot ATR Buffer
Default:
0.25
TP1 Risk / Reward
Default:
1.0R
TP2 Risk / Reward
Default:
2.0R
TP3 Risk / Reward
Default:
3.0R
Level Projection Bars
Default:
20
━━━━━━━━━━━━━━━━━━━━━━
🟡 Break-Even
Break-Even Mode
• Off
• After TP1
• After TP2
Default:
After TP1
Break-Even Offset Ticks
Default:
0
━━━━━━━━━━━━━━━━━━━━━━
📊 Statistics Dashboard
Show Statistics Dashboard
Default:
On
Dashboard Position
• Top Right
• Bottom Right
• Top Left
• Bottom Left
━━━━━━━━━━━━━━━━━━━━━━
🎨 Visual Settings
Theme Mode
• Auto
• Dark Mode
• Light Mode
• Phone Mode
Label Size
• Tiny
• Small
• Normal
• Large
• Huge
Phone Mode always uses Tiny.
━━━━━━━━━━━━━━━━━━━━━━
🔔 Alert Settings
Enable BUY Alerts
Default:
On
Enable SELL Alerts
Default:
On
Enable Dynamic Alerts
Default:
On
All public input values are hidden from PulseWire’s status line to reduce chart-header clutter.
━━━━━━━━━━━━━━━━━━━━━━
🧠 WHAT MAKES THIS SCRIPT ORIGINAL
━━━━━━━━━━━━━━━━━━━━━━
Pivots, ATR, EMA, volume comparison, session filters, risk/reward levels, Break-Even, alerts, and performance statistics are established technical-analysis concepts.
These concepts are not unique by themselves.
The originality of Pivot Sniper Method lies in the coordinated implementation applied to them:
confirmed high and low pivots
→ same-bar directional-conflict rejection
→ Bullish / Bearish / Both permission
→ session filtering
→ cooldown
→ five-part 0–100 quality model
→ minimum-quality acceptance
→ compact two-line BUY / SELL labels
→ confirmation-close Entry
→ four selectable Stop Loss models
→ ATR structural-stop validation fallback
→ independently adjustable TP1 / TP2 / TP3
→ target-state visual updates
→ TP1- or TP2-based Break-Even
→ Entry-to-BE visual replacement
→ active-trade replacement at current close
→ internal partial-R accounting
→ desktop and Phone dashboards
→ theme-aware colors
→ dashboard-corner selection
→ detailed static and dynamic alerts
Distinctive implementation features include:
• using five quality dimensions inside one pivot-reversal workflow
• separating pivot confirmation from Entry timing
• using the original pivot candle for wick quality
• using the later confirmation candle for candle quality and Entry
• applying session control only to new entries
• supporting four Stop Loss construction methods
• validating structural stops and falling back to ATR when required
• removing the Entry visual after Break-Even replaces it
• tracking replacement exits in R
• showing latest quality components in a compact dashboard
• supporting both individual events and one combined dynamic-alert workflow
The script is not a collection of unrelated indicators.
Every component supports the same objective: evaluating and managing a confirmed pivot-reversal setup under explicit, reviewable rules.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ IMPORTANT PRACTICAL NOTES
━━━━━━━━━━━━━━━━━━━━━━
Signal frequency depends on:
• symbol
• timeframe
• data provider
• pivot left and right settings
• Trend Bias
• selected session
• cooldown
• minimum strength
• EMA length
• volume length
• ATR availability
• historical data availability
Higher right-side pivot values increase confirmation delay.
Higher strength thresholds reduce accepted signals.
Session filtering can remove otherwise valid setups.
The strength score is not a probability forecast.
The Trend component is part of the score, not a separate hard trend filter.
The script replaces an active tracked trade when a new eligible signal appears.
The script does not retain completed trade lines historically.
Dashboard statistics use loaded chart history only.
Different exchanges, brokers, and data feeds can produce different:
• highs
• lows
• closes
• pivots
• wick measurements
• volume values
• ATR values
• EMA values
• signals
• stop levels
• target levels
• replacement exits
• historical statistics
Changing available history can change the first eligible setup and later active-trade sequencing.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ LIMITATIONS AND SHORTCOMINGS
━━━━━━━━━━━━━━━━━━━━━━
This script has important limitations.
It does not guarantee profitable trades.
It does not predict future price movement with certainty.
It does not execute orders.
It does not place broker Stop Loss orders.
It does not place broker Take Profit orders.
It does not calculate position size.
It does not calculate account risk.
It does not include spread.
It does not include commission.
It does not include slippage.
It does not include latency.
It does not include swap or financing.
It does not include taxes.
It does not model partial fills.
It does not model order rejection.
It does not model contract specifications.
It does not model tick-by-tick execution.
It uses historical OHLC bars.
It cannot always determine whether Stop or target occurred first inside one candle.
It resolves same-candle ambiguity in favor of the active Stop.
It begins trade-management checks on the candle after Entry.
It requires right-side pivot confirmation.
It cannot identify a confirmed pivot on the original pivot candle.
It can react with delay when larger right-side values are used.
It rejects simultaneous high and low pivot confirmation.
It can reject setups through bias, session, strength, or cooldown rules.
It replaces an active tracked trade when a new eligible signal appears.
A replacement exit can close a trade before its mapped Stop or TP3.
Its Signal Strength is an internal score, not a probability.
Its volume component depends on available volume data.
Its dashboard is not Strategy Tester.
Its statistics are not audited.
Its Win Rate excludes exact 0R Break-Even results.
A positive Break-Even offset can classify a BE hit as positive R.
Its target hit rates use total trades started.
Its statistics depend on loaded chart history.
Changing settings recalculates historical behavior.
Alerts depend on PulseWire and user configuration.
Alerts do not guarantee broker execution.
━━━━━━━━━━━━━━━━━━━━━━
👤 WHO THIS SCRIPT MAY BE USEFUL FOR
━━━━━━━━━━━━━━━━━━━━━━
This script may be useful for traders who:
• understand pivot confirmation
• want BUY and SELL signals based on confirmed price pivots
• prefer a quality score instead of equal treatment for every pivot
• want separate Bullish and Bearish direction controls
• want London, New York, or Custom session filtering
• want selectable ATR or structural stops
• want independently adjustable R targets
• want TP1- or TP2-based Break-Even
• want active trade levels on the chart
• want compact tooltips
• want loaded-history R statistics
• want a compact desktop dashboard
• want a reduced Phone Mode
• want detailed PulseWire alerts
• understand that historical chart results are not verified execution
It may be less suitable for users who:
• want signals on the original unconfirmed pivot candle
• want no pivot delay
• want tick-level backtesting
• want multiple simultaneous tracked trades
• want new signals ignored while a trade is active
• want historical completed-trade lines preserved
• want automatic broker execution
• want position sizing
• want commission and slippage modeling
• want guaranteed reversal signals
• interpret Signal Strength as win probability
• expect historical Win Rate to continue unchanged
━━━━━━━━━━━━━━━━━━━━━━
🧭 BEST-PRACTICE SUGGESTIONS
━━━━━━━━━━━━━━━━━━━━━━
For studying pivot sensitivity:
• begin with equal high and low pivot settings
• compare smaller and larger left / right values
• remember that right-side values directly affect delay
For studying raw signal behavior:
• use Both Trend Bias
• use All Sessions
• use a moderate minimum strength
• review every accepted BUY and SELL
For directional study:
• use Bullish or Bearish
• compare results separately
• do not assume one direction will remain superior
For session-based review:
• compare All Sessions with London or New York
• use the exchange’s actual liquidity characteristics
• remember that active trades remain managed outside the session
For Signal Strength:
• begin with 55
• compare frequency at 45, 55, and 65
• review the five components
• do not interpret the percentage as guaranteed probability
For risk mapping:
• begin with ATR 14 and 2.0 multiplier
• compare ATR with Pivot Level
• compare Pivot Level with Pivot + ATR Buffer
• maintain logical TP1 < TP2 < TP3 values
For Break-Even:
• compare Off with After TP1
• test After TP2 for wider trade development
• keep the tick offset realistic for the instrument
For chart clarity:
• use Auto for general use
• use Dark or Light when manual control is preferred
• use Phone Mode on smaller screens
• move the dashboard away from important price action
• adjust label size according to chart density
Always:
• wait for confirmed signals
• review broader market structure
• review liquidity and volatility
• review news risk
• define personal account risk
• calculate position size independently
• test the exact symbol, timeframe, and data feed
• inspect failed trades as well as successful trades
• recreate alerts after important configuration changes
━━━━━━━━━━━━━━━━━━━━━━
🔓 PUBLICATION NOTE
━━━━━━━━━━━━━━━━━━━━━━
Pivot Sniper Method is published as an educational pivot-confirmation, signal-quality, session-filtering, risk-mapping, Break-Even, statistics, and alert tool.
The purpose of this description is to explain:
• how pivots are confirmed
• why signals appear after the original pivot
• how BUY and SELL candidates are formed
• how simultaneous pivot conflicts are rejected
• how Trend Bias affects eligibility
• how session filtering affects new entries
• how cooldown affects frequency
• how the five Signal Strength components work
• why Signal Strength is not a probability
• how Entry is defined
• how each Stop Loss Mode works
• how invalid structural stops fall back to ATR
• how TP1, TP2, and TP3 are calculated
• how Break-Even activates
• why Entry disappears after BE becomes active
• how same-candle Stop / target ambiguity is handled
• how active trades are replaced by new eligible signals
• how internal R statistics are calculated
• what the dashboard displays
• how Phone Mode differs
• what alerts include
• what the script does not simulate
• why historical results can change
The script is designed to support structured review.
It does not promise profitable results.
It does not remove market risk.
It does not replace independent analysis.
It does not replace personal risk management.
━━━━━━━━━━━━━━━━━━━━━━
🕒 REPAINTING, BACKPLOTTING, AND TIMING DISCLOSURE
━━━━━━━━━━━━━━━━━━━━━━
Pivot Sniper Method uses confirmed price pivots.
Pivot confirmation requires future candles relative to the original pivot location.
The number of required right-side candles is controlled independently for pivot highs and pivot lows.
The script does not know that a pivot exists on the original pivot candle.
After the required right-side candles complete:
• the pivot becomes confirmed
• the candidate is evaluated
• Signal Strength is calculated
• filters are applied
• the BUY or SELL label can appear on the confirmation candle
• the tracked Entry can open at the confirmation-candle close
The BUY or SELL trade label is not plotted back on the original pivot candle.
The Entry is not backdated.
Signals require confirmed chart bars.
This reduces unfinished current-bar variation.
It does not remove:
• pivot confirmation delay
• differences between historical OHLC and tick sequence
• data-feed differences
• changes caused by settings
• changes caused by loaded history
• market risk
Historical results can change when:
• pivot settings change
• Trend Bias changes
• session settings change
• cooldown changes
• strength settings change
• ATR settings change
• Stop Loss Mode changes
• target settings change
• Break-Even settings change
• symbol changes
• timeframe changes
• exchange or broker feed changes
• available chart history changes
Users should interpret the original pivot price as historical structure and the later BUY / SELL candle as the actual confirmed signal timing.
━━━━━━━━━━━━━━━━━━━━━━
🛡️ DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━━
Pivot Sniper Method is provided for educational and informational purposes only.
It does not constitute financial, investment, trading, legal, accounting, or tax advice.
No indicator can guarantee future results.
Markets are uncertain.
Price structure changes.
Volatility changes.
Liquidity changes.
Volume behavior changes.
Session behavior changes.
Historical chart behavior does not ensure future performance.
Every user is responsible for their own:
• analysis
• validation
• symbol selection
• timeframe selection
• pivot settings
• directional bias
• session selection
• quality threshold
• Stop Loss selection
• target planning
• Break-Even selection
• position sizing
• risk management
• alert configuration
• trading decisions
• broker execution
• legal obligations
• tax obligations
The pivots, BUY labels, SELL labels, Signal Strength values, Entry levels, Stop Loss levels, Break-Even levels, TP1 levels, TP2 levels, TP3 levels, active lines, labels, tooltips, dashboard values, Win Rate, NET R, Average R, target hit rates, and alerts are visual analysis tools only.
A confirmed pivot is not a guaranteed reversal.
A high Signal Strength value is not a guaranteed winning trade.
A TP label is not proof of an actual broker fill.
A Stop Loss event is not proof of an actual broker fill.
The dashboard is not verified account performance.
The statistics are not audited.
The script does not include spread, commission, slippage, latency, financing, taxes, partial fills, order rejection, position sizing, account equity, or broker-specific execution.
Use the script as a structured pivot-reversal review, trade-mapping, and monitoring framework—not as a promise of profitability or a substitute for independent judgment.
Indicator
Support Resistance AI [PickMyTrade]Every support/resistance tool answers "where are the levels." None answer the question a trader actually has when price arrives at one: does THIS test look like the ones that held, or like the ones that broke?
――――――――――――――――――――――――――――――――――――――
🔷 WHAT IT MEASURES
🔸 Confirmed swing pivots, clustered into zones and merged as new evidence accumulates
🔸 Eight properties of every ARRIVAL at a zone — approach speed, relative volume, prior test count, zone age, trend pressure, zone width, pivot count, and cumulative touches
🔸 A broken level isn't discarded — it flips role once (broken support becomes candidate resistance) and only a second failure retires it
🔸 A live Previous Day/Week High/Low reference map, shown only when price is within range
――――――――――――――――――――――――――――――――――――――
🔷 THE CLASSIFIER
🔸 An online Gaussian Naive Bayes model, trained continuously as tests resolve — no repainting, no lookahead
🔸 Nothing about a level's price is used as a feature — only how price approached it
🔸 The classic claim that "a level tested repeatedly grows weaker" is measured on each chart's own history here, rather than assumed
🔸 Below a configurable warmup sample count, the script shows the chart's running hold rate instead and reads LEARNING — it never guesses early
――――――――――――――――――――――――――――――――――――――
🔷 SIGNALS AND DISPLAY
🔸 Zone boxes colored by role (support/resistance) and shaded by live conviction, with worded verdicts ("similar arrivals held X%") instead of a bare number
🔸 Rank-based visibility — only the nearest zones to current price are drawn, so old or distant levels never stretch the chart's scale
🔸 Test history ticks stamped inside each zone at the bar where its own tests resolved
🔸 An info table with Nearest Support/Resistance, model accuracy, and sample counts
🔸 3 alertconditions, worded as observations of what the classifier's reading — never as trade instructions
――――――――――――――――――――――――――――――――――――――
🔷 INPUTS
Pivot Left/Right Bars — swing detection window. Default 10/10.
Zone Width / Merge Distance — band thickness and clustering tolerance, in ATR. Default 0.5 / 0.75.
Break Buffer / Rejection Distance — how far price must close beyond or travel back from a zone to resolve a test. Default 0.25 / 0.75 ATR.
Post-Flip Cooldown — bars a flipped zone must survive before a break can retire it. Default 5.
Warmup Samples — resolved tests required before the classifier is trusted. Default 25.
Conviction Threshold — probability at which a zone is shown at full conviction. Default 0.62.
Max Live Zones / Show Distance — how many nearby zones are drawn and how far (in ATR) before one is hidden.
Show Trend EMA, Zen Mode — display toggles; Zen Mode hides labels and the table for clean screenshots.
――――――――――――――――――――――――――――――――――――――
🔷 REQUIREMENTS AND LIMITATIONS
🔸 Pivots confirm only after the right-side lookback bars close — a level appears on the chart later than the swing that created it, by design
🔸 One thing does refine retroactively: when a later pivot merges into an existing zone, its band re-centers toward the weighted average — a zone with an open test is never re-centered, so no in-progress outcome is affected
🔸 Early on a fresh chart, or for a zone with only one or two tests, its own read is thin — the model's overall sample count travels with every verdict so that's never hidden
🔸 This script reports how historical arrivals resolved. It does not predict, and it is not a trading system on its own.
――――――――――――――――――――――――――――――――――――――
Built in Pine Script v6. Open source — Mozilla Public License 2.0. Indicator
Deep Market Structure & Liquidity Matrix [Pro]================================================================================
Deep Market Structure & Liquidity Matrix
================================================================================
Welcome to the Deep Market Structure & Liquidity Matrix . This all-in-one technical indicator is designed for Smart Money Concepts (SMC) traders, price action analysts, and institutional structure followers. It cleans up market noise and delivers precise structure mapping directly on your chart.
Whether you trade Forex, Crypto, Indices, or Commodities, this tool provides clear, real-time insights into macro trends, key structural breaks, major liquidity levels, and dynamic trend channels.
--------------------------------------------------------------------------------
KEY FEATURES & DETAILED BREAKDOWN
--------------------------------------------------------------------------------
1. Smooth Glowing Trend Line (Length: 70)
Unlike standard moving averages that lag or cause frequent false flips during choppy sessions, this script incorporates a high-period smoothed trend tracking algorithm (Hull-based).
- Green Line: Confirms a sustained macro Bullish Trend.
- Red Line: Confirms a sustained macro Bearish Trend.
It filters out minor price noise and keeps your focus aligned with the dominant higher-timeframe trend direction.
2. Major ITH & ITL Badges (Intermediate Term Highs/Lows)
Identifying major structural pivots is essential for liquidity mapping.
- Red "ITH" Badge: Highlights major macro swing highs (Intermediate Term Highs) where buy-side liquidity resides.
- Green "ITL" Badge: Highlights major macro swing lows (Intermediate Term Lows) where sell-side liquidity resides.
These badges only trigger on major swing points, keeping your charts clutter-free.
3. SMC Structure Mapping (BOS & CHoCH with Offset Labels)
To eliminate visual clutter, all structure markers are placed precisely with clean vertical offsets:
- BOS (Break of Structure): Highlights structural trend continuations.
- CHoCH (Change of Character): Signals potential early trend reversals.
Labels are placed above bullish break lines and below bearish break lines to prevent candles or lines from obscuring the text.
4. Dynamic Trend Channel Engine
Automated swing-point connections generate real-time trend channels to highlight dynamic support and resistance zones. This helps traders visually identify key channel boundaries and structural slope without manual drawing clutter.
5. Live Market Structure Dashboard
Located at the top right of the chart, this live dashboard summarizes key market metrics at a glance:
- Market Trend: Live macro direction (Bullish / Bearish).
- Market Phase: Automatically detects Consolidation (Low Volatility) vs. Expansion (High Volatility) using ATR parameters.
- Volatility (ATR): Displays real-time 14-period Average True Range metrics.
--------------------------------------------------------------------------------
HOW TO USE THIS INDICATOR
--------------------------------------------------------------------------------
1. Trend Identification: Use the Glowing Trend Line to bias your trades (Long when Green, Short when Red).
2. Liquidity Zones: Monitor the Major ITH and ITL levels as key targets or reversal zones.
3. Confirmation: Look for CHoCH for trend shift signals and BOS for continuation entries aligned with the main trend.
--------------------------------------------------------------------------------
DISCLAIMER & HOUSE RULES COMPLIANCE
--------------------------------------------------------------------------------
This script is strictly created for educational and analytical purposes only. It does not provide buy/sell signals or financial advice. Trading involves substantial risk, and past structural setups do not guarantee future price action. Always apply sound risk management strategies.
Indicator
Institutional Core Engine [IOF-X Major ICT]Institutional Core Engine
The Institutional Core Engine is an analytical Pine Script tool designed to assist traders in visualizing key Institutional Order Flow (IOF) and Inner Circle Trader (ICT) concepts on their charts. By removing unnecessary chart clutter, this indicator highlights high-probability liquidity pools, fair value imbalances, premium/discount zones, and structural pivot levels in a clean and modern aesthetic.
🔑 Key Features & Core Components
1. Major ICT Intermediate-Term Highs & Lows (ITH / ITL)
ITH (Red Markers): Automatically plots significant intermediate-term highs where buy-side liquidity resides.
ITL (Green Markers): Plots significant intermediate-term lows where sell-side liquidity resides.
Proximity & Range Protection: Utilizes dynamic ATR-based swing filtering and a distance gap rule (minimum 20 bars) to ensure micro-fractals do not clutter the chart.
Dynamic Sweep Auto-Deletion: Active ITH/ITL markers automatically disappear when price sweeps or breaks through the level, maintaining a clean visual workspace.
2. Clean Consolidation Ranges (EQH / EQL)
Equal Highs (EQH) & Equal Lows (EQL): Identifies active range consolidations using subtle horizontal trendlines.
Floating Labels: Displays clean, floating text labels for EQH at the top-right and EQL at the bottom-left without heavy background boxes.
3. Fair Value Gap Imbalances (BISI / SIBI)
BISI (Buyside Imbalance Sellside Inefficiency): Identifies bullish imbalances where price expanded aggressively upward.
SIBI (Sellside Imbalance Buyside Inefficiency): Highlights bearish imbalances where price expanded aggressively downward.
Golden Imbalance Candle: Highlights the origin bar of active imbalances with a golden candle hue for fast visual identification.
Mitigation Engine: Active zones automatically resolve and clear from the chart once price fully mitigates the gap.
4. Smart Money Fibonacci & OTE Engine
Optimal Trade Entry (OTE): Draws key equilibrium (0.5 Fib) and OTE extension levels (0.618 - 0.786 zone) across active swing ranges to assess premium and discount pricing.
5. Institutional Trend Filter (EMA 50 / 200)
Plots smoothed fast and slow moving averages to quickly assess higher-timeframe trend context and dynamic support/resistance zones.
6. Professional Real-Time HUD Dashboard
A top-right visual table displaying real-time metrics including active BISI/SIBI counts, current market state (Consolidation vs. Expansion), and overall institutional order flow bias.
📐 How to Use This Script
Context & Bias: Check the HUD Dashboard and Trend EMAs to establish the higher timeframe direction (Bullish, Bearish, or Neutral).
Liquidity Mapping: Observe active ITH and ITL markers along with EQH/EQL boundaries to locate where market liquidity is resting.
Imbalance Confluence: Look for price reactions near BISI or SIBI zones within the OTE (0.618 - 0.786) Fibonacci range for potential trade setups.
Execution Management: Once liquidity levels are taken or imbalances are mitigated, watch how the dynamic auto-deletion clears swept zones to adapt your analysis to fresh price action.
⚙️ Customization Settings
Sensitivity Controls: Adjust pivot lookback lengths and distance filters to match your preferred trading timeframe (Scalping, Intraday, or Swing).
Threshold Filters: Modify ATR imbalance thresholds to show only major market moves.
Visual Toggles: Turn off individual visual modules (EMAs, Fibs, or HUD) directly from the input settings menu to tailor the indicator to your personal chart style.
Disclaimer: This indicator is developed strictly for educational and analytical purposes on PulseWire. It does not guarantee future market outcomes nor constitute financial advice. Always apply proper risk management. Indicator
