Indicator
EVA Ai + POC, Liquidity & Smart Money 1.4.1 EN💎 EVA Ai + POC, Liquidity & Smart Money 1.4.1 PRO EN — SEE WHERE THE MARKET ACCEPTED PRICE
Volume bars below a chart tell you when activity happened. EVA Volume Profile PRO shows where it happened.
The indicator maps traded volume across price, calculates POC and the Value Area, detects HVN/LVN structure, tracks directional volume and builds confirmed BSL/SSL liquidity pools. The result is a clean auction map for traders who use Volume Profile, Smart Money concepts, market structure and liquidity analysis — without flooding the candles with heavy color.
Use it for stocks, crypto and Forex, from scalping and intraday trading to swing analysis. AUTOPILOT adapts the lower timeframe, row density, node thresholds and liquidity-quality filters to the active chart.
This is a market-reading tool, not a LONG/SHORT signal generator. Its job is to show where value sits, where price may accelerate and where confirmed liquidity remains active before you build a trade plan.
━━━━━━━━━━━━━━━━━━━━
⚡ CORE MARKET MAP
• Volume Profile — horizontal volume distribution by price.
• POC — the price row with the highest calculated volume.
• Value Area — the price range containing the selected share of total volume; 70% is the standard target.
• VAH / VAL — upper and lower Value Area boundaries.
• HVN — high-volume acceptance nodes where price may slow, balance or retest.
• LVN — low-volume rejection corridors where price can travel quickly.
• Up / Down Volume — directional volume context classified from lower-timeframe candles.
• Delta — the difference between classified Up Volume and Down Volume across the profile.
• BSL / SSL — confirmed buy-side and sell-side liquidity pools around equal swing highs and lows.
• Liquidity Quality Q — a quality score using relative volume, rejection wick and spacing between confirmations.
• Nearest Targets — closest BSL, SSL, HVN and LVN with ATR distance and live state.
━━━━━━━━━━━━━━━━━━━━
🗺 HOW TO READ THE CHART
START WITH VALUE
Price between VAL and VAH is trading inside accepted value. This is usually a two-sided auction: POC attracts price, HVNs can hold rotation and the center of the profile often produces more noise than its edges.
Holding above VAH signals price discovery above value. Holding below VAL signals price discovery below value. A single breakout is not enough on its own — watch whether the boundary survives a retest and whether directional volume supports the move.
READ THE POC
The bright magenta POC marks the highest-volume price in the selected range. It acts as the profile’s center of gravity.
Price close to POC is usually balanced. Price far from POC may be building a new area of value or preparing a rotation back toward the old one. Context decides which path is active.
READ THE PROFILE SHAPE
Long horizontal rows represent heavier participation. Short rows show low acceptance.
The main histogram uses a restrained neutral palette. A thin neon rail at the profile anchor shows row-level direction: teal for Up Volume dominance, pink for Down Volume dominance. Stronger imbalance produces a brighter rail without recoloring the entire histogram.
HVN — ACCEPTANCE
Blue HVN zones mark local volume peaks. These are areas where the market previously agreed on price. Expect slower movement, consolidation, support/resistance behavior or repeated tests.
An HVN does not disappear after a touch. It represents completed volume structure, not uncollected stops.
LVN — REJECTION AND FAST TRAVEL
Amber LVN zones mark local volume valleys. Price spent less time there, so movement may accelerate through the corridor until it reaches the next HVN, Value Area boundary or active liquidity pool.
LVNs remain part of the calculated profile and update when the selected range changes.
BSL / SSL — CONFIRMED LIQUIDITY
BSL appears above confirmed equal swing highs, where short stops and breakout liquidity can cluster. SSL appears below confirmed equal swing lows, where long stops and sell-side liquidity may sit.
A pool requires at least two comparable confirmed pivots and must pass the adaptive Q filter. The script does not print every high and low as “liquidity.”
Liquidity states:
• FRESH — confirmed and not yet tested.
• TESTED — price entered the zone without completing the full sweep; the zone fades.
• OFF — still calculated but outside the active ATR work radius, so it is hidden from the chart.
• SWEPT — price cleared the far boundary; every drawing for that pool is deleted.
━━━━━━━━━━━━━━━━━━━━
📊 THE CALCULATED DASHBOARD
AUTOPILOT
Shows whether adaptive mode is active and which lower timeframe is selected.
AUCTION
Reports whether price is inside Value Area, above VAH or below VAL.
RANGE / SOURCE
Displays Visible Range, Session HD or Fixed Range and confirms whether calculations use chart candles or lower-timeframe data.
ROWS × STEP
Shows the actual number of profile rows and price increment. You always know the resolution behind the map.
UP / DOWN AND DELTA
Displays directional volume shares and the net profile imbalance.
POC / DIST
Shows POC and the current price distance from it.
NEAREST BSL / SSL
Shows pool price, distance in ATR, Q score and FRESH, TESTED or OFF state.
NEAREST HVN / LVN
Locates the closest acceptance node and fast-travel corridor.
STRUCTURE
Classifies the profile as upper concentration, lower concentration or balanced.
STATUS
Confirms developing mode, closed-bar mode or a safe data fallback.
━━━━━━━━━━━━━━━━━━━━
⚙️ THREE VOLUME PROFILE MODES
VISIBLE RANGE
Calculates only the candles currently visible on the screen. Zoom or scroll and the profile rebuilds around the market structure you are actually studying.
SESSION HD
Creates a separate profile for each selected trading session. Useful for intraday POC, daily Value Area, opening rotations and session-based support/resistance.
FIXED RANGE
Measures one specific impulse, consolidation, breakout leg or accumulation range between two adjustable time markers.
━━━━━━━━━━━━━━━━━━━━
🎯 PRACTICAL READING SCENARIOS
BALANCED AUCTION
Price is inside Value Area and close to POC or an HVN. The market is accepting price. Chasing the middle of the profile offers less structural clarity than waiting for a reaction at VAH, VAL or a nearby liquidity zone.
BULLISH PRICE DISCOVERY
Price holds above VAH, directional volume remains constructive and BSL is active overhead. The bullish auction remains valid while price accepts above value; a return below VAH weakens that read.
BEARISH PRICE DISCOVERY
Price holds below VAL, Down Volume expands and an SSL pool remains below. The bearish auction stays active until price regains the Value Area.
LVN TRAVEL
Price enters an LVN without opposing participation. The low-volume corridor may provide a faster route toward the next HVN, POC, VA boundary or liquidity target.
LIQUIDITY SWEEP
Price clears the far edge of BSL or SSL and the pool disappears. The next question is acceptance or rejection: check candle response, volume, Delta and location relative to VAH/VAL. A sweep alone does not guarantee reversal.
━━━━━━━━━━━━━━━━━━━━
🧠 AUTOPILOT, LOWER TIMEFRAME DATA AND INTEGRITY
AUTOPILOT adjusts lower-timeframe selection, row density, HVN/LVN thresholds, pivot sensitivity, pool width, minimum Q and the visible ATR radius. The developing profile updates as new confirmed microbars arrive.
Lower-timeframe OHLCV improves price allocation inside each chart candle. If the requested intrabar history is unavailable or incomplete, EVA falls back to the complete chart-candle sample rather than silently using a truncated profile.
The script uses the volume supplied by the active symbol’s data feed. On some markets, especially Forex, that may be tick volume. Pine Script cannot access a historical exchange order book or full bid/ask footprint, so EVA does not fabricate either one. The directional rail is an order-flow-style approximation derived from lower-timeframe candle direction.
Confirmed BSL/SSL pools are created from closed pivot events and are not backfilled onto earlier bars. Visible Range and developing profiles recalculate when the viewport or incoming data changes — expected behavior for a dynamic Volume Profile, not a historical trading signal being rewritten.
━━━━━━━━━━━━━━━━━━━━
⚠️ RISK NOTICE
EVA Volume Profile PRO is an analytical PulseWire indicator. It does not execute orders and is not financial advice. Markets involve risk. Every setup requires independent validation, position sizing and risk management.
━━━━━━━━━━━━━━━━━━━━
🔥 READY TO TURN THE LIQUIDITY MAP INTO A COMPLETE TRADE SCENARIO?
EVA AI Plus combines confirmed LONG/SHORT signals, Market Structure, Liquidity Sweeps, Smart Money context, Support/Resistance, Supply/Demand, Fair Value Gaps, Whale Volume, signal-quality filters, AI Advisor explanations, TP/SL, Trail, TP+ and internal statistics in one premium PulseWire workspace.
Open EVA AI Plus, add it to your favorites and request access to the 7-day test drive:
Indicator
Zone Flow S/R StrategyZone Flow S/R Strategy
📌 Strategy Overview
Zone Flow is a multi‑timeframe support/resistance strategy that uses dynamic pivot‑derived zones to identify high‑probability reversal and breakout setups.
Unlike static support/resistance lines, this 9‑level zone system (R4–R1, P, S1–S4) automatically adapts to market structure changes at each new period (Daily/Weekly/Monthly). Each zone has a configurable width (Percentage, ATR, or Fixed) to account for volatility, and a breakout threshold to filter out minor wicks.
# Unique Synergy
Most pivot strategies treat levels as static lines, leading to false breakouts. Most engulfing strategies ignore the bigger picture, catching falling knives. This strategy solves both problems by combining these components in a specific sequence:
1- Dynamic Zones + Gap State Machine (The Context)
Instead of just drawing lines, we create zones (R1-R4, P, S1-S4) with adaptive width. More importantly, the Gap State Machine tracks which gap price sits in (e.g., between R1 and Pivot). This tells us exactly where we are in the market structure. If price moves from upper Gap to lower Gap, the strategy instantly switches sentiment from Bullish to Bearish.
- Why this matters: It prevents the strategy from trading blindly; it only trades when price is transitioning between structural levels, and price retrace to the zone drastically reducing false signals in the middle of nowhere.
2- Pin Bar Sweep + Engulfing Combo (The Momentum Trigger)
A standard pin bar alone is a weak reversal signal. A standard engulfing pattern alone is common. However, when a Pin Bar sweeps the N-bar high/low (proving a breakout attempt failed) and is immediately followed by an Engulfing pattern on the next candle, this combo represents a "double confirmation" of exhaustion.
Crucially, this specific combo overrides the EMA confirmation.
- Why this matters: Strong momentum sweeps often happen against the short-term EMA trend. By allowing this specific combo to bypass the EMA, the strategy captures powerful reversals that pure trend-following strategies miss.
3- Dynamic Zone Width (The Volatility Adaptation)
Instead of using fixed support/resistance, the zone width changes based on the selected Period's ATR or Percentage.
- Why this matters: This ensures the strategy scales perfectly across any asset (Gold, Crypto, Forex) without manual width adjustments, making it robust across different volatility regimes.
4- Selective Zone Activation (The Manual Override)
Unlike standard pivot systems that force trades on every level, the Zone Selection inputs allow users to disable specific zones (e.g., turn off R3 if price often fakes out there or turn off S4 market is always get exhausted lower probability trade).
- Why this matters: This turns the strategy from a rigid algorithm into a customizable framework where the user can apply their own discretion based on historical price behavior.
5. Hierarchical EMA Architecture (The Structural Governor)
This strategy does not treat all EMAs equally. It uses a two-tier EMA system with a strict hierarchy:
Lower TF EMA (Optional & Overrideable): The Lower TF EMA on the current timeframe acts as a micro-trend filter. However, as explained above, the Pin Bar Sweep + Engulfing Combo can override this filter. Why? Because strong institutional reversals often happen against the short-term trend, and we want to capture them.
Higher TF EMA (Absolute & Non-Negotiable): Higher TF EMA on the selected Higher Timeframe acts as an "Absolute Structural Governor." Unlike the lower EMA, this filter cannot be overridden by any pattern.
For Long entries: Price must be above this HTF EMA.
For Short entries: Price must be below this HTF EMA.
Most strategies either ignore the HTF entirely. By making the HTF EMA absolute and the LTF EMA overrideable, this strategy achieves the perfect balance:
The HTF EMA prevents catastrophic drawdowns by keeping you on the right side of the bigger trend.
The LTF EMA override allows you to catch sharp, high-probability reversals within that trend without being delayed by a slow-moving micro-filter.
6. Optional Risk Architecture (The Management Layer)
The strategy includes a built-in partial-take-profit and breakeven module. By default, this module is disabled to provide a clean, straightforward 1:3 risk-reward backtest without the complexity of multiple exit orders.
This default setting allows users to evaluate the core entry logic (zones + patterns) without interference from partial exits.
However, for traders who want to reduce psychological pressure or manage Gold's notorious retracements, they can enable Allow Breakeven and Allow Partial TP. When activated, the strategy closes a percentage of the position (e.g., 50%) at a lower R:R threshold (TP1) and moves the remaining position to breakeven—locking in early profits while letting the rest of the trade run.
# Zone Calculation
The strategy calculates 9 zones using a modified pivot point formula from the selected period (Daily, Weekly, Monthly, Quarterly, Yearly):
The pivot formula can be one of 5 methods: Classic, Fibonacci, Woodie, Camarilla, or DM.
The Classic Pivot (shown below) is the most widely used and serves as the default:
Pivot (P) = (H + L + C) / 3
R1 = (2 × P) – L
S1 = (2 × P) – H
R2 = P + (H – L)
S2 = P – (H – L)
(R3, R4, S3, S4 are logical extensions of this same principle)
Additional Methods (Briefly Explained):
Fibonacci: Uses the golden ratio multipliers (0.382, 0.618, 1.000, 1.618) to place support/resistance levels between the pivot and the high/low range.
Woodie: Gives extra weight to the closing price (Formula: P = (H + L + 2C) / 4), making it more sensitive to the current session's momentum.
Camarilla: Uses multipliers based on the previous range to place levels very close to the current price, ideal for range-bound trading and scalping.
DM: Adjusts the pivot formula conditionally based on whether the close was higher or lower than the open, making it adaptive to daily sentiment.
From these, the strategy derives:
- 4 Resistance Zones (R4, R3, R2, R1) – above the pivot
- 1 Pivot Zone (P)
- 4 Support Zones (S1, S2, S3, S4) – below the pivot
Each zone is expanded by a Zone Width to create a buffer, making the levels more practical.
# Zone Width Calculation
Three modes:
- Percentage – zone width as a percentage of current price
- ATR Multiplier – width = ATR × Multiplier
- Fixed – fixed price distance
# Gap Index Mapping (0–9):
Gap 0 – Above R4 → Aggressive (no trades)
Gap 1 – Between R4 and R3 → Bearish near R4, Bullish near R3
Gap 2 – Between R3 and R2 → Bearish near R3, Bullish near R2
Gap 3 – Between R2 and R1 → Bearish near R2, Bullish near R1
Gap 4 – Between R1 and Pivot → Bearish near R1, Bullish near Pivot
Gap 5 – Between Pivot and S1 → Bearish near Pivot, Bullish near S1
Gap 6 – Between S1 and S2 → Bearish near S1, Bullish near S2
Gap 7 – Between S2 and S3 → Bearish near S2, Bullish near S3
Gap 8 – Between S3 and S4 → Bearish near S3, Bullish near S4
Gap 9 – Below S4 → Aggressive (no trades)
Based on the gap index and price action, the strategy sets allowLong or allowShort – and displays the status on the info table.
Market Status Displayed:
- Bullish – near support zones; long trades allowed
- Bearish – near resistance zones; short trades allowed
- Waiting – new period started; zones recalculating; no trades
- Aggressive – above R4 or below S4; no trades
- Zone disabled – manually disabled zone; no trades
# Entry Signals
1. Engulfing Patterns
Detects bullish and bearish engulfing with filters:
- Body Only – if true, only bodies must engulf (not full range)
- Min/Max Range – can be Percentage, ATR Multiplier, or Fixed
- Gap Allowance – max price gap between previous close and current open
- Previous or Prior Candle – at least one of the last two candles must be the opposite. color (bearish for bullish engulf; bullish for bearish engulf).
This is not a random condition. The strategy only considers trades when price is near a strong structural zone (support/resistance). Because the zone itself provides the primary context for a potential reversal, the immediate previous candle does not need to be strictly opposite in color.By relaxing the requirement to "at least one of the last two," the strategy captures valid reversals at key levels that a strict, textbook rule would miss—while remaining highly selective because it only trades near strong zones.
2. Pin Bar + Engulfing Combo (EMA Override)
Identifies hammers/shooting stars with:
- Wick/Body Ratio (Wick 3× body)Requires a clearly defined pin bar with a very small body.
- Max Body/Range (Body is at most 20% of range) Ensures the body is genuinely small relative to the total range. This is the textbook definition of a pin bar/hammer. Captures true rejection candles.
- Min Wick/Range (70% of range) This is the classic pin bar definition. A 70%+ wick means price aggressively rejected the level and reversed.
- Sweep Lookback – bullish pinbar must break the lowest low of the previous N bars;
bearish must break the highest high
a pin bar that sweeps a recent extreme (lookback) and the very next candle forms an engulfing pattern in the same direction. This combo overrides the Lower TF EMA confirmation – a unique feature that captures strong momentum after a sweep.
Combined Entry Requirements
All of the following must be true:
1. Valid engulfing or pin+engulf combo
2. Pattern occurs near a zone (open inside zone boundaries or crossing it)
3. Market status aligns with trade direction
4. Daily trade limit not exceeded (default: 2)
5. Relevant zone is enabled
6. Price is on the correct side of EMAs (unless overridden by combo)
7. HTF EMA confirms (if enabled)
8. RSI not overbought/oversold (if enabled)
9. Not within the no‑trade window (if enabled)
-----------------------------------------------------
# Confirmation Filters
Current TF EMA – ensures micro‑trend alignment. Overridden by pin+engulf combo.
Higher TF EMA (default 150 on 1H) – filters out counter‑trend moves in the bigger picture.
RSI – prevents buying above 70 and selling below 30.
Bollinger Bands – blocks trades when volatility is too low (BB width below threshold).This filter is specifically designed for assets that range heavily—choppy, sideways markets.
No‑Trade Window – avoids end‑of‑day volatility (active only for timeframes ≤15min).
# Risk & Position Management
1- Position Sizing:
- Risk per trade – percentage of equity for first trade, separate for second
- Position size = (Account Risk) / (Entry – SL distance).
- Second trade does not increment the daily trade counter:
This is a deliberate design choice. The daily trade counter tracks new trade initiations, not total positions. The second trade (pyramiding) is considered a continuation of the existing position, not a new independent decision. This ensures the strategy can scale into strong trends without consuming the daily limit, while still respecting the maximum number of new entries per session.
2-Stop Loss Options:
- Low-High – entry bar low/high ± buffer Tight, reactive stops. Best for scalping or when you want the SL to follow the immediate price action of the entry candle.
- Swing high/low – N-bar low/high ± buffer Broader, structural stops. Ideal for swing trading or when you want the SL to respect recent market structure rather than a single bar.
- Zone – zone boundary ± buffer Structural stops aligned with pivot levels. Best when you want the SL to be placed exactly at the structural support/resistance level that defines the trade.
- Fixed distance – fixed price distance Simple, static stops. Useful when you know your exact risk tolerance in dollar/pip terms and want a consistent SL distance regardless of volatility.
- ATR Multiplier – entry ± (ATR × multiplier) Volatility-adaptive stops. Best for Gold's changing volatility—widens during news/high volatility, tightens during calm periods.
3- Take Profit:
- Main R:R ratio – main R:R ratio (default 1:3), plus optional partial TP and breakeven at a lower R:R ratio.
- Partial TP – close a percentage of position at a lower R:R (TP1)
- Breakeven – optionally move stop to entry at TP1
4- Trade Counter Reset:
- For TF ≤ 15m: resets at NY (9:30 AM) and London (3:30 AM) starts (configurable)
This aligns with Gold's session-specific volatility and allows fresh participation in each session while preventing over-trading within a single session.
- For TF > 15m: resets once per day at session start (Every new day) Session-specific behavior is less relevant on higher timeframes, and a simple daily cap is more appropriate for swing trading.
5- No‑Trade Window:
- Avoids high‑volatility periods (e.g., end of day)
- Active only for TF ≤ 15m (16:00 PM – 18:30 PM NY time, configurable) End-of-day volatility spikes can cause excessive slippage and erratic price action on short timeframes. on TF > 15 The window is too short to be meaningful; higher timeframe traders are less affected by brief volatility spikes.
6- Session Close:
- TF ≤ 15m: can close at day end and/or week end (configurable). Scalping trades on 1m–15m charts typically last minutes to a few hours. These trades are highly sensitive to Overnight gaps, Weekend gaps
- 15m < TF ≤ 10h: only week end. Swing trading on 30m–4H charts typically lasts hours to several days.
- TF > 10h: feature disabled. Position trading on daily+ charts lasts days to weeks. These trades aim to capture large macro moves.
# Chart Display
- Zone boxes – semi‑transparent red/pink with labels (R4…S4), auto‑cleanup (max 55 periods)
- Trade management lines – entry (white), SL (red), TP (green), TP1/breakeven (dashed),
with green/red fills; auto‑cleanup ((4) * max 125)
- Info table (top‑right) :
1. shows Market Status(Bullish/Bearish/Aggressive/Waiting).
2. EMA confirmations.
3. Zone Width, Breakout threshold.
4. Engulf range max min.
5. SL settings(SL refrence, sL bufer)
- EMA plots – light blue (lower TF) and light red (higher TF)
- Signal shapes – hidden by default (can be enabled via style settings)
- arrowdown shapes - "Reset trade counter"
- Background 1 color – yellow during no‑trade window
- Background 2 color – white close all position on week/day end.
UI Note: Inputs are hidden from the status line to keep your chart clean. All settings (zones, EMAs, risk, patterns) remain fully adjustable in Settings → Inputs.
# Default Settings – Optimized for XAUUSD (Gold)
All default values have been calibrated specifically for Gold's typical volatility and intraday structure.
(Setting : Default : Why This Works for Gold)
----------------------------------------------------------------------------------------
Period : Daily : Gold respects daily highs/lows as key structural levels.
-----------------------------------------------------------------------------------------
Pivot Type : Classic : Most widely used and reliable for Gold.
-----------------------------------------------------------------------------------------
Zone Width : ATR (0.053× ATR(14)) : ATR(14) provides a stable, week-to-week view of Gold's volatility (roughly two trading weeks of data).Adapts to Gold's daily volatility (Zone Width often $4–$10 range).
-----------------------------------------------------------------------------------------
Breakout Threshold : 7% of zone width : Zone width ≈ $3.00–$10.00 (Daily ATR × 0.053). 7% ≈ $0.21–$0.70 (21–70 ticks)—filters noise wicks, captures genuine breaks.Prevents false transitions caused by standard stop-hunting wicks
-----------------------------------------------------------------------------------------
Engulfing Range : ATR(14) (0.375× – 2.5×) : ATR(14) sits in the "sweet spot"—responsive enough to capture shifts in Gold's volatility relatively quickly, yet long enough to smooth out the daily noise and provide a reliable, consistent measure. Captures meaningful moves $3–$15—ensures candle has enough size to be meaningful, rejecting tiny $0.30–$0.50 noise patterns, while filtering out massive blow-off spikes (> $20–$25 on 15m).
-----------------------------------------------------------------------------------------
Pin Bar Sweep : 12 bars : 12 bars – Calibrated for Gold's 3-hour intraday cycle and session transitions. Long enough to capture genuine liquidity grabs, short enough to avoid outdated levels.
-----------------------------------------------------------------------------------------
Risk per trade : 2% (1st), 1% (2nd) : Balances risk with Gold's occasional false breakouts. For Gold's volatile nature, 2%-1% provides the best balance between survival and growth.
-----------------------------------------------------------------------------------------
Risk:Reward : 1:3 : Gold routinely moves 1.5–2× its ATR in a single directional push. A 1:3 target is well within Gold's typical daily range.
-----------------------------------------------------------------------------------------
Stop-Loss Reference : ATR Multiplier : For Gold's volatile nature, a static stop-loss (Fixed or Low-High) cannot adapt to changing volatility. ATR-based SL scales with market conditions—widening during high volatility (news, session opens) and tightening during calm periods. This ensures the stop-loss is always "fair" relative to current market conditions, preventing premature stops during normal volatility spikes
-----------------------------------------------------------------------------------------
Stop-Loss Multiplier : 1.8× ATR(14) : A 1.8× ATR(14) stop-loss represents 1.8 times Gold's average 14-period range. Why 1.8× and not 2.0× or 1.5×? Backtesting revealed that 1.8× is the "sweet spot"—wide enough to survive Gold's normal volatility spikes without being stopped out by noise, yet tight enough to limit losses
-----------------------------------------------------------------------------------------
Current TF EMA : 21 (Enabled, Overrideable) : On 15m chart = 5.25 hours—perfectly captures Gold's average intraday move length. Can be overridden by Pin Bar + Engulfing Combo to catch institutional reversals that occur against the short-term trend.
-----------------------------------------------------------------------------------------
Higher TF EMA : 150 on 1H : On Gold, a 150-period EMA on a 1H chart represents roughly 6.5 days (one full trading week) of data. By making this filter absolute, the strategy guarantees it will never take a counter-trend trade against the weekly macro-structure.trend.
-----------------------------------------------------------------------------------------
Filter (RSI) : length 12 : Most traders default to RSI(14), but RSI(12) is intentionally faster for Gold's volatile intraday moves. Gold often spikes into overbought/oversold territory and reverses quickly. A 12-period RSI reacts ~15% faster than RSI(14), catching these reversals earlier while remaining smooth enough to avoid excessive whipsaws.
-----------------------------------------------------------------------------------------
Filter (Bollinger Bands) : Disabled by default : Gold is historically a trending asset with strong directional moves. A low-volatility filter would unnecessarily block valid entries during these trends. Designed for range-bound assets (choppy crypto, certain forex crosses)—enable it only if your market consolidates heavily.
-----------------------------------------------------------------------------------------
These values are a starting point – you may adjust them for other assets or personal risk tolerance.
# Important Notes on Backtest Realism
- Commission – Most ECN/raw-spread brokers charge $3.00–$3.50 per side (round-turn commission of $6.00- $7.00) for 1 standard lot (100 oz) of XAUUSD. Standard accounts usually build the fee into a wider spread instead of charging a separate cash. This strategy deducts $3.50 per entry and $3.50 per exit ($0.035 × 100 oz)round-turn commission of $7.00. Adjust this to match your broker's exact fees.
- 4 ticks Slippage - For XAUUSD, 1 tick = $0.01 per ounce. 4 ticks = **$0.04 per ounce (unit)**. Accounts for real-world price . Prevents overly optimistic backtest equity curves.
Always adjust the commission value to your broker's exact fee structure before relying on the results.
"A backtest without realistic commission and slippage is a fantasy. A backtest with realistic commission and slippage is a truthful reflection of what you can expect when trading live."
- Intra-Bar Execution: The strategy uses calc_on_every_tick = true, meaning it recalculates on every price tick during real-time trading. This allows the breakeven and partial TP logic to trigger immediately when price hits TP1, protecting the trade from intra-bar reversals.
Note: Backtests use OHLC data only, so intra-bar fills and breakeven triggers cannot be perfectly simulated. Real-time performance may differ from backtest results due to this limitation
# The Core Innovation (Why This Isn't Just a Mashup)
This strategy is built on a three-layer validation system. Each layer solves a specific problem that the other layers cannot solve alone.
Layer 1 (The Structure): Dynamic Pivot Zones
Layer 2 (The Trigger): Pin-Bar Sweep + Engulfing Combo
Layer 3 (The Execution): Gap State Machine
Here is how they interdepend to create a unique edge:
1. Adaptive Pivot Mathematics (The "Regime Matching" Logic)
Instead of offering multiple pivot types just for the sake of it, this strategy provides them so the trader can match the mathematical formula to the market's current behavioral regime:
Why this matters: Most strategies lock you into one formula. This strategy acknowledges that price dynamics change, and it gives you the mathematical weapon to adapt without rewriting the entire code.
2. The "Liquidity Grab" Trigger (Sweep + Engulfing Combo)
This is the most critical edge of the strategy. A standard Engulfing pattern is common. A standard Pin Bar is common. But when they occur sequentially—a Pin Bar that sweeps the 12-bar extreme, immediately followed by an Engulfing candle—it represents a textbook institutional "liquidity grab."
- The Logic: Large players often push price to sweep obvious stop-losses (above highs or below lows) before reversing the trend.
- The Override: Crucially, this specific combo overrides the Lower TF EMA confirmation.
- Why this is a breakthrough: Standard trend-following strategies with a hard EMA filter will miss these reversals because price is moving against the EMA in the short term. By programming this specific override, the strategy captures the exact moment of institutional reversal—catching the move before the EMA flips and the trend-followers finally enter.
3. The Gap State Machine (Dynamic Sentiment Tracking)
Unlike static support/resistance scripts that just plot lines and wait for touches, this strategy features a state machine that tracks which of the 9 gaps (between R4-R1, Pivot, S1-S4) the price currently occupies.
- The Mechanism: A Breakout Threshold (default 7% of zone width) acts as a "dead-zone" filter. Price must exceed this threshold to officially transition from one gap to another.
- The Alpha: This prevents the strategy from whipsawing during minor noise. When price crosses from Gap 4 (between R1 and Pivot) into Gap 3 (between R2 and R1), the strategy instantly and autonomously switches market status from "Bearish" to "Bullish" or vice versa.
4. Selective Zone Activation (Strategic Discretion)
- This strategy allows the user to completely disable specific zones (e.g., turn off R3).
- The Value: By disabling a weak level, the user forces the strategy to wait for the next stronger level, instantly increasing the win rate and filtering out historically weak signals without altering any other code.
5. Non-Invasive Risk Architecture (Clean Defaults)
For traders who want to reduce psychological pressure or optimize for Gold's notorious retracements, they can enable these modules. When activated, the strategy closes % of the position at a lower R:R threshold and moves the remaining position to breakeven—locking in profits while letting the rest run.
In Summary: The "Mashup" Justification
This is not a random collection of indicators.
1. The State Machine provides the structural context.
2. The Pin+Engulf combo provides the high-conviction trigger that overrides slow-moving filters.
3. The Selectable Pivot Types provide the mathematical adaptability to different assets.
4. The Selectable Zones provide the manual discretion to avoid historical losing levels.
5. The Disabled TP/BE by default provides a clean baseline for evaluating the core logic.
Author: Awab_Hassan
Strategy
TL Space Concept Pro - Three Finger Spread Breakout EngineSPACE CONCEPT PRO - THE THREE-FINGER SPREAD ENGINE
Some of the most consistent discretionary traders never look at a chart without two moving averages on it: the 20 SMA and the 200 SMA. Add price itself and you have THREE ITEMS - three "fingers". The distance between them is called SPACE, and space tells you when a market is about to explode and when a move is about to die. This indicator turns that entire concept into a fully mechanical engine with signals, trade management and webhook automation.
=== THE CONCEPT ===
THE THREE ITEMS
1. Price
2. The 20 period simple moving average
3. The 200 period simple moving average
NARROW STATE - all three items clustered together. The market has reset itself. An explosive move is loading, direction unknown. You do not need to predict it: you simply wait for the biggest bar to emerge.
SPACE ZONE 1 - the space between the 20 SMA and the 200 SMA.
SPACE ZONE 2 - price accelerating away from the 20 SMA. Sometimes the underlying moves faster than the moving average can keep up, creating a second layer of space.
DUAL SPACE / THREE-FINGER SPREAD - both zones open at the same time, all three fingers clearly separated and stacked in order. This is where moves get exhausted.
THE RAILROAD RULE - if price runs parallel to the 20 SMA like railroad tracks, that is NOT a spread. Price has to ACCELERATE away from the moving average. The engine checks this automatically.
THE WIDEST SPREAD - the widest three-finger spread of the lookback window finds you the temporary top or bottom 8 to 9 times out of 10. When it prints, the reversal watch arms and the extreme that must hold is marked on the chart.
NARROW TO NARROW - when the spread collapses from the widest state back to narrow WITHOUT breaking the extreme, the next direction is the reversal. Confirmed by a power bar: a three-finger spread reversing with a power bar is the creme de la creme of this method.
=== THE SIGNALS ===
1. BREAKOUT - power bar (biggest bar of the window) exploding out of a narrow state. Entry inside the bar, stop beyond the bar.
2. SPREAD REVERSAL - widest spread found the extreme, spread collapsed back toward narrow without breaking it, power bar confirms. Target follows the 50 percent rule.
3. EARLY REVERSAL - first strong color change directly at the widest spread (the bottoming tail bar play). Stop beyond the extreme.
4. TAIL BAR - optional: bottoming/topping tail bars near narrow states as early entries (markers by default).
Every signal prints as a two-line pill with the setup name, and every pill carries a WHY tooltip that explains the exact chain of logic behind the trade - plus entry, stop, target and R:R.
=== TRADE MANAGEMENT (AS TAUGHT) ===
- ADD on the first color change after entry ("always adding on the first color change")
- TP at the 50 percent mark of the move - the pros are satisfied with the halfway mark, do not get greedy
- After the partial: bar-by-bar trailing stop until the market takes you out
- Hard stop beyond the power bar / spread extreme with an ATR buffer
- Full position box and live status in the cockpit panel
=== THE COCKPIT ===
An animated terminal-style panel shows everything at a glance:
- Animated 3D gold pixel logo with a moving light sweep (live ticks)
- State chip: NARROW STATE / 3-FINGER SPREAD / WIDEST SPREAD / REVERSAL WATCH
- Spread rank 0-100 plus live ZONE 1 / ZONE 2 meter bars in ATR
- 7-step SPACE CHECKLIST mirroring the method: items stacked, zone 1, zone 2, acceleration (railroad filter), widest-spread watch, power bar, management
- Position box, big signal line, spread/reset/signal counters
On the chart: shaded zone 1 and zone 2 fills, narrow-state boxes, MARKET RESET tags, 3-FINGER SPREAD labels, gold WIDEST SPREAD stars with vertical measuring lines (exactly how it is drawn when taught), the must-hold extreme line, TAIL tags and lightning power-bar markers. Everything is explained on the chart - hover any label for the reasoning.
=== AUTOMATION / WEBHOOK ===
Create ONE alert with condition "Any alert() function call" and paste your webhook URL. The indicator sends ready-to-use JSON for every event:
{"id":"TL-SPACE-CONCEPT","symbol":"BTCUSD","action":"BUY","setup":"BREAKOUT","price":64100.5,"sl":63900.0,"tp":64500.0,"tf":"15","time":"2026-07-18 16:30"}
Actions: BUY, SELL, ADD, TP_50, TRAIL_EXIT, SL_HIT, NARROW_STATE, WIDEST_SPREAD. Classic alertconditions for BUY / SELL / Narrow State / Widest Spread are included as well.
=== SELF-CALIBRATING ===
The spread is ranked against its own history (percentile engine) and all distances are measured in ATR - so the indicator works out of the box on any market (crypto, forex, gold, indices, stocks, futures) and any timeframe from 1 minute to weekly. Practice finding three-finger spreads everywhere - that is the homework.
=== SETTINGS ===
Every input is documented with a tooltip quoting the original rule it implements. Adjust the narrow/wide percentiles, power-bar size, dual-space minimum, acceleration window, 50 percent rule targets and the SL buffer to fit your market and style.
=== DISCLAIMER ===
Educational tool, not financial advice. No indicator wins every trade - prepare for the 1-2 times out of 10 the concept is wrong: keep your risk unit small compared to your profit unit. That is how you stay in business.
Indicator
Liquidity HeatmapLiquidity Heatmap – POC and Value Area.
A rolling volume-density profile rendered directly onto the price chart. Over a configurable lookback window the indicator distributes each historical bar's volume across every price bin its high-low range covered, then draws the resulting distribution as color-graded horizontal lines at each bin's midpoint. Point of Control and Value Area (70 % of total volume) are computed automatically, and a compact right-side histogram mirrors the profile in the future-offset zone. Built for intraday and swing traders who want a live, minimal read of where the market actually did business — the real liquidity anchors, not manual pivots.
How it works:
The indicator recalculates every N bars (default 5). On each recalc it finds the highest and lowest price of the lookback window, splits that range into a configurable number of bins (default 40), and iterates through every bar in the window. For each bar its volume — or a unit weight if volume weighting is disabled — is added to every bin whose price range the bar crossed. The result is a density array: the more time price stayed inside a bin and the higher the volume of those bars, the larger its density value. Bins are drawn as thin horizontal lines at their midpoints, with color and transparency scaled by the ratio of bin density to peak density.
The Point of Control is the bin with the largest total. Value Area is grown outward from POC, alternately taking whichever adjacent side holds more volume, until 70 % of the entire distribution is covered — VAH becomes the upper boundary of that region and VAL the lower. A right-side density histogram in the chart's offset zone re-renders the same profile in bar-chart form, and the level labels (POC / VAH / VAL) sit past the histogram so they never overlap the main heatmap. The information panel in the top-right corner shows the numeric price of each level and its signed percentage delta to the current close, color-coded green when the level sits above price, red when below, gray at parity.
What it calculates:
- Volume density per price bin over the lookback window
- POC — Point of Control, the bin with peak accumulated volume
- VAH — Value Area High, upper boundary of the 70 % volume region
- VAL — Value Area Low, lower boundary of the 70 % volume region
- Signed delta from current close to POC / VAH / VAL, in percent
Key features:
- Rolling recalculation every N bars for tunable CPU / responsiveness balance
- Volume weighting (default) or touch-count mode as a per-price frequency map — useful when volume data is unreliable
- Four-stop plasma color gradient (deep navy → violet → magenta → amber), every stop user-overridable via input.color
- Constant 1-pixel line width across all bins; visual weight is carried entirely by color intensity and transparency
- POC solid line and label placed past the offset histogram for readability
- VAH / VAL dashed lines extended all the way to their labels so the eye follows the level continuously
- Compact right-side density histogram in the future-offset area, mirroring the main profile in bar-chart form
- Top-right information panel with POC / VAH / VAL price and signed percentage delta to the current close, colored by side (green above / red below / gray at parity)
- Independent visibility toggles for POC and Value Area
- Adaptive bin geometry — resolution scales automatically with the price range of the lookback window
- Runs on any timeframe and any instrument; no external data sources required
Who it's for:
Intraday scalpers, swing traders, order-flow and Market Profile practitioners who need to see the true volume anchors of the current regime instead of hand-drawn horizontals. The color-graded strips make dominant liquidity walls, thin gaps and Value Area boundaries visually obvious at a glance, so attention goes to execution rather than to marking up the chart. Indicator
Levels MarkerLevels Marker is an all-in-one intraday price-action toolkit that combines
several commonly-used reference levels and market-structure tools into a
single indicator — no need to load five separate scripts.
█ FEATURES
🔹 Previous Day High / Low (PDH / PDL)
Automatically plots yesterday's high and low as horizontal lines with labels.
Valid for the entire current trading day and refreshes at the start of each
new session.
🔹 Asian Session High / Low
Tracks the high and low formed during a fully customizable session window
(default 05:30–11:30, Asia/Kolkata). Once the session ends, the level freezes
and remains visible as a fixed reference for the rest of the day.
🔹 Pivot-Based Support / Resistance
Detects swing highs/lows using an adjustable pivot strength and plots the
most recent levels (configurable count) as horizontal support/resistance
lines.
🔹 BOS / CHoCH (Market Structure)
Automatically identifies:
- BOS (Break of Structure) — trend continuation
- CHoCH (Change of Character) — potential trend reversal
Drawn as dashed lines with labels the moment price closes beyond the last
swing high/low.
🔹 Trend Direction Label
A live label in the corner of the chart shows the current structural bias:
▲ BULLISH / ▼ BEARISH / NEUTRAL.
🔹 Built-in Alerts
Four ready-to-use alert conditions appear directly in PulseWire's native
"Create Alert" dropdown:
- PDH Cross
- PDL Cross
- Asian High Cross
- Asian Low Cross
Each one fires only on a confirmed candle CLOSE beyond the level (not a
simple wick touch), which helps cut down on false/noise alerts.
█ CUSTOMIZATION
Every component can be shown/hidden and recolored independently:
- PDH / PDL
- Asian Session High / Low (with custom session + timezone)
- Support / Resistance (pivot strength + max levels shown)
- BOS / CHoCH (independent toggles, colors, label size)
- Trend label on/off
- Label distance from the last bar (so labels don't overlap price action)
█ HOW TO USE
1. Add the indicator to your chart.
2. Open Settings and enable/disable whichever levels you want to track.
3. Right-click the chart → Add Alert → select this indicator as the
Condition → choose one of the 4 built-in cross alerts.
This script is intended as a clean, configurable reference-level toolkit
for intraday traders working with daily/session-based key levels and basic
market structure (BOS/CHoCH), without needing to combine multiple
separate indicators.
⚠️ DISCLAIMER
This script is for educational and informational purposes only. It does
not constitute financial, investment, or trading advice, and should not
be relied upon for making trading or investment decisions. Past
performance of any strategy or level is not indicative of future results.
Trading and investing in financial markets involves substantial risk of
loss and is not suitable for every investor. You are solely responsible
for any trades or investment decisions you make. Always do your own
research and consult a licensed financial advisor before making any
trading decisions.
The author accepts no liability whatsoever for any direct or indirect
loss arising from the use of this script. Indicator
Scalping Master PRO By Mr BASIT Scalping Master PRO is an advanced, high-precision scalping tool designed to help traders identify high-probability trend continuation and reversal setups. Built on Pine Script v6, this indicator combines Trend Analysis, Volume Confirmation, Session Filtering, Dynamic Support/Resistance Zones, and Automated Risk Management.
🔥 Key Features
3-EMA Trend Strategy: Combines Fast EMA (9) and Slow EMA (21) for execution, filtered by the 200 EMA to ensure trades align with the macro trend.
Volume Spike Filter: Signals are validated only when trading volume exceeds a custom threshold (1.5x average volume), filtering out low-volatility fakeouts.
Session Filter: Restricts trades to active market sessions (e.g., London & New York) to avoid choppy, ranging market conditions.
Clean 1x S/R Zones: Automatically plots dynamic Support and Resistance boxes based on strong swing pivots (limited to the latest 2 zones to keep your chart uncluttered).
Auto SL/TP Risk Management Boxes: Plots visual Long/Short position boxes with dynamic ATR-based Stop Loss and a 1:2 Risk-to-Reward ratio upon signal trigger.
On-Screen Dashboard Panel: Displays real-time 200 EMA trend status and volume strength in a compact UI widget.
Pine Script v6 Engine: Optimized with robust, zero-indentation inline logic to ensure maximum speed and compatibility.
💡 How to Use
Bullish Setup (BUY):
Fast EMA crosses above Slow EMA while price is above the 200 EMA.
Volume confirms with a spike.
Green BUY triangle appears with auto-generated Risk/Reward target boxes.
Bearish Setup (SELL):
Fast EMA crosses below Slow EMA while price is below the 200 EMA.
Volume confirms with a spike.
Red SELL triangle appears with auto-generated Risk/Reward target boxes.
Best Timeframes: 1m, 5m, 15m (Optimized for Scalping & Day Trading)
Best Assets: XAUUSD (Gold), Forex Pairs, Crypto (BTC/USDT) Indicator
Support Resistance AI [PickMyTrade]Every support/resistance tool answers "where are the levels." None answer the question a trader actually has when price arrives at one: does THIS test look like the ones that held, or like the ones that broke?
――――――――――――――――――――――――――――――――――――――
🔷 WHAT IT MEASURES
🔸 Confirmed swing pivots, clustered into zones and merged as new evidence accumulates
🔸 Eight properties of every ARRIVAL at a zone — approach speed, relative volume, prior test count, zone age, trend pressure, zone width, pivot count, and cumulative touches
🔸 A broken level isn't discarded — it flips role once (broken support becomes candidate resistance) and only a second failure retires it
🔸 A live Previous Day/Week High/Low reference map, shown only when price is within range
――――――――――――――――――――――――――――――――――――――
🔷 THE CLASSIFIER
🔸 An online Gaussian Naive Bayes model, trained continuously as tests resolve — no repainting, no lookahead
🔸 Nothing about a level's price is used as a feature — only how price approached it
🔸 The classic claim that "a level tested repeatedly grows weaker" is measured on each chart's own history here, rather than assumed
🔸 Below a configurable warmup sample count, the script shows the chart's running hold rate instead and reads LEARNING — it never guesses early
――――――――――――――――――――――――――――――――――――――
🔷 SIGNALS AND DISPLAY
🔸 Zone boxes colored by role (support/resistance) and shaded by live conviction, with worded verdicts ("similar arrivals held X%") instead of a bare number
🔸 Rank-based visibility — only the nearest zones to current price are drawn, so old or distant levels never stretch the chart's scale
🔸 Test history ticks stamped inside each zone at the bar where its own tests resolved
🔸 An info table with Nearest Support/Resistance, model accuracy, and sample counts
🔸 3 alertconditions, worded as observations of what the classifier's reading — never as trade instructions
――――――――――――――――――――――――――――――――――――――
🔷 INPUTS
Pivot Left/Right Bars — swing detection window. Default 10/10.
Zone Width / Merge Distance — band thickness and clustering tolerance, in ATR. Default 0.5 / 0.75.
Break Buffer / Rejection Distance — how far price must close beyond or travel back from a zone to resolve a test. Default 0.25 / 0.75 ATR.
Post-Flip Cooldown — bars a flipped zone must survive before a break can retire it. Default 5.
Warmup Samples — resolved tests required before the classifier is trusted. Default 25.
Conviction Threshold — probability at which a zone is shown at full conviction. Default 0.62.
Max Live Zones / Show Distance — how many nearby zones are drawn and how far (in ATR) before one is hidden.
Show Trend EMA, Zen Mode — display toggles; Zen Mode hides labels and the table for clean screenshots.
――――――――――――――――――――――――――――――――――――――
🔷 REQUIREMENTS AND LIMITATIONS
🔸 Pivots confirm only after the right-side lookback bars close — a level appears on the chart later than the swing that created it, by design
🔸 One thing does refine retroactively: when a later pivot merges into an existing zone, its band re-centers toward the weighted average — a zone with an open test is never re-centered, so no in-progress outcome is affected
🔸 Early on a fresh chart, or for a zone with only one or two tests, its own read is thin — the model's overall sample count travels with every verdict so that's never hidden
🔸 This script reports how historical arrivals resolved. It does not predict, and it is not a trading system on its own.
――――――――――――――――――――――――――――――――――――――
Built in Pine Script v6. Open source — Mozilla Public License 2.0. Indicator
Indicator
ES/NQ Daily Levels Paste-In Sup/Res MapperDaily Levels is a manual, paste-in mapping tool. Paste a list of price levels into the settings and it draws them on your chart as clean lines and shaded zones with labels. It does not calculate signals or repaint — it simply renders the levels you enter.
Works on any symbol — ES, NQ, SPY, SPX, stocks, futures, forex, and crypto. Just paste levels that match that instrument's price.
Leave the box blank and it shows a few sample reference levels around current price (clearly tagged "sample", 10 points apart by default) so you can see how it works on any chart. The samples auto-hide the moment you paste your own levels. (The 10-point default spacing suits ES/NQ; for other instruments set the spacing to fit, or set it to 0 for auto.)
WHAT IT DRAWS
- Single prices → horizontal lines with labels
- Ranges (e.g. 5200-5205) → shaded zones
- Section groups you can label: Resistances, Supports, and special groups (Backtest, Add, Breakdown, Short)
- Tag any level "(major)" and it renders thicker
DYNAMIC S/R FLIP (optional)
When enabled, each level you paste under Supports/Resistances is colored by where price is right now:
- Price above the level → acts as support (green, "S")
- Price below the level → acts as resistance (red, "R")
- Price inside a zone → neutral / in-play (yellow)
Turn it off to keep the exact section labels you pasted.
HOW TO USE
1. Add the indicator to your chart.
2. Open its settings → "PASTE YOUR DAILY LEVELS HERE".
3. Paste your levels, one section per line, for example:
Resistances: 5210, 5218 (major), 5225-5228
Supports: 5188, 5175 (major)
4. Lines, zones, and labels draw automatically. Colors, widths, spacing, and label styling are all configurable.
NOTE
The sample levels are auto-generated placeholders for demonstration only — they are not recommended levels and should not be used for trading. This tool does not generate, suggest, or predict levels; it only displays the ones you enter.
For educational purpose Indicator
Indicator
Untested Levels - PD Highs, Lows & GapsUntested Levels automatically maps the session prices futures traders commonly mark by hand: previous regular-session highs and lows, current and prior overnight highs and lows, previous closes and unfilled gap levels, plus the all-time high.
The purpose is simple: spend less time redrawing levels every morning and keep important price context visible as the market develops. Each line begins where its high, low, or close was established and is labeled with both its name and exact price.
The indicator is designed around the session structure of CME equity index futures, particularly Nasdaq futures (NQ/MNQ) and S&P 500 futures (ES/MES). Its session times are fully configurable, so the same framework can be used with other futures markets whose trading sessions are defined appropriately.
WHY IT IS DIFFERENT
Many session-level tools either show only the most recent day or remove a level as soon as price reaches it. This indicator maintains a structured history and treats a level's first breach separately from its display timing.
By default, a prior level that is breached during the current trading day remains visible until the day rolls over. This preserves the line for the rest of the session, allowing you to see whether a former high or low is subsequently respected, rejected, or used as support or resistance. If you prefer immediate removal, the "Hide breached levels immediately" setting is available.
Regular-session highs and lows, overnight highs and lows, and prior closes each have their own lookback setting. You can retain more history for one class of level without overcrowding the chart with every other class.
The calculations are session-defined rather than chart-defined. They are built from the symbol's extended-hours feed, so switching the chart between Regular Trading Hours and Electronic Trading Hours does not change the underlying levels. An RTH chart can therefore remain visually clean while still displaying the overnight high and low.
LEVEL NAMES
The numbering follows trading days, not calendar dates. The overnight session belongs to the same trading day as the regular session that follows it.
YD High / YD Low
Yesterday's regular-session high and low.
PD 2 High / PD 2 Low
The regular-session high and low from two trading days ago.
PD 3, PD 4, and later numbers continue in the same way.
YD is effectively the first prior trading day, so there is no separate
"PD 1 High" or "PD 1 Low" label.
ON High / ON Low
The current trading day's overnight-session high and low.
These update while the overnight session is forming.
ETH 1 High / ETH 1 Low
The overnight high and low associated with yesterday's regular session.
ETH 1 therefore pairs with YD.
ETH 2 High / ETH 2 Low
The overnight high and low from two trading days ago.
ETH 2 pairs with PD 2, ETH 3 pairs with PD 3, and so on.
YD Close
The most recent configured session close. This level always displays when
previous-close levels are enabled.
PD 2 Close, PD 3 Close, etc.
Older configured closes that remain unfilled by a later regular session.
These levels identify still-open historical gaps within the selected
gap lookback.
ATH
The all-time high. If a displayed high is also the all-time high, its
normal label receives an ATH prefix. If the all-time high is not one of
the displayed session levels, a separate ATH line is drawn.
SESSION CALCULATIONS
Each configured trading day is divided into three parts:
Overnight session:
Trading-day start to the regular-session open.
This produces ON and ETH highs and lows.
Regular session:
Regular-session open to regular-session close.
This produces YD and PD highs and lows.
Post-close tail:
Regular-session close to the next trading-day start.
This does not create a new session high or low, but its price action can
breach an existing level.
The default times are expressed in Pacific Time:
Trading day starts: 15:00
Regular session opens: 06:30
Regular session closes: 13:15
Close candle opens: 13:55
The time zone and all session boundaries can be changed in the settings. The "Close candle" input identifies the opening time of the candle whose closing price will be stored. If that exact candle is unavailable, the script uses the last available candle before the selected time.
WHAT COUNTS AS UNTESTED
A prior regular-session high remains unbreached until later price trades above it. A prior regular-session low remains unbreached until later price trades below it. The calculation considers price action after the level's own regular session, including that day's post-close tail, later overnight sessions, and later regular sessions.
An overnight high or low is evaluated only against price action after that overnight session ends. This prevents the price action that created the level from also invalidating it.
By default, an exact touch does not count as a breach; price must trade through the level. Enable "Exact touch counts as a breach" if you want a touch to invalidate it.
YD High, YD Low, ON High, ON Low, and YD Close remain available as current reference levels even when tested. Older PD and ETH levels are filtered according to their breach status and your selected display timing.
PREVIOUS CLOSES AND GAPS
YD Close always shows when enabled. Older closes appear as PD n Close only while their gap remains unfilled.
Gap status is based on later regular-session price action. Overnight and post-close-tail activity do not fill a close gap. This keeps the gap logic aligned with the cash-session context rather than allowing overnight movement alone to remove the level.
An alert condition is included for price touching or crossing YD Close during the regular session.
ALL-TIME HIGH
The ATH calculation combines available chart history, extended-hours intraday history, and extended daily history. If the ATH matches a displayed high, that label is prefixed with ATH and emphasized. Otherwise, the indicator creates a standalone ATH level so the price remains marked even when it falls outside the selected session lookbacks.
LOOKBACKS AND DISPLAY CONTROLS
The indicator provides independent controls for:
• Regular-session high/low lookback
• Overnight high/low lookback
• Prior-close and gap lookback
• YD, PD, ON, ETH, close, ATH, and label visibility
• Immediate or end-of-day removal of breached levels
• Exact-touch breach behavior
• Session times and time zone
• Colors, line style, line width, label size, and label offset
Separating the lookbacks makes it possible to retain a broad history of untested highs and lows while using a shorter window for overnight levels or gaps.
RTH AND ETH CHART BEHAVIOR
All session values are requested from extended-hours data, so the same calculated levels appear whether the chart is displaying RTH or ETH candles.
PulseWire scripts only execute when the chart receives a bar. An RTH chart therefore cannot update live while its chart session is closed. To handle this, "Roll levels at the regular session close" is enabled by default. It advances the labels and removes levels breached during the completed day on the final regular-session bar, leaving a frozen RTH chart in the correct end-of-session state. The extended-hours feed completes the normal rollover when the next chart session begins.
For live overnight development of ON High and ON Low, use an ETH chart.
HOW TO USE THE LEVELS
These lines identify historically significant prices; they do not predict which level price will visit or how price will react when it gets there. Traders may use them as context for targets, breakouts, failed breakouts, support/resistance flips, gap fills, and confluence with their own trade setups.
The retained-line behavior is especially useful after a breach: instead of losing the reference immediately, you can observe whether price returns to the level and changes its behavior around it later in the same session.
LIMITATIONS
This indicator is intended for intraday charts. Its session calculations use an extended-hours intraday feed, set to five minutes by default. Available lookback depth depends on the amount of intraday history PulseWire provides for the symbol and the user's plan.
Session defaults are designed for the stated CME equity index futures workflow. Confirm and adjust the time zone, trading-day start, regular-session boundaries, and close-candle time before using the indicator on another market.
Holiday schedules, shortened sessions, missing bars, exchange data differences, and delayed feeds can affect the levels. Use standard price charts and verify the settings for the instrument being traded.
Untested Levels is a charting and market-context tool, not a trading system. It does not provide entries, exits, profit targets, or guarantees of future support or resistance. Indicator
Market Compass - Dynamic Range FrameworkHello English readers, the English version is provided below. Please scroll down to view it.
Market Compass - Dynamic Range Framework
市场指南针 · 动态区间框架
版本：1.0 | 类型：非预测性价格结构定位工具 | 作者：
绝大多数交易亏损，根源并非方向判断错误，而是 “位置感”的缺失 。本指标旨在为您解决这一核心痛点——它不告诉您涨跌，但它告诉您 “此时此刻，价格在地图上的精确坐标” 。
---
本指标并非传统的均线或动量振荡器，而是一个 基于固定回溯周期的价格百分位区间定位系统 。它以最近 N 根 K 线（默认 252 根，对应约 1 个交易年度）的最高价与最低价为天然边界，构建出一个覆盖 0% 至 100% 的 动态箱体网格 。
该网格并非平均分割，而是采用 非对称的黄金分割与极值锚定法 ，精确定制了 9 条关键水平轨道。这些轨道以彩色矩形色带和右侧实时浮动标签的形式，干净利落地叠加于主图 K 线之上：
100% 顶部极值轨 （红色）：回溯周期内的绝对天花板。
89% 超买警戒轨 （橙色）：情绪极度亢奋区，多头衰竭高发带。
75% 强势分界轨 （黄色）：牛熊分水岭，站上此线意味中期趋势转强。
62.5% 强界枢轴轨 （紫色）：多头趋势中的次级回踩支撑位。
50% 多空中轴轨 （白色）：价值均衡线，长线资金的成本密集区。
37.5% 弱界枢轴轨 （青色）：空头趋势中的次级反弹阻力位。
25% 弱势分界轨 （亮蓝）：跌破此线意味中期趋势正式转入空头。
11% 超卖警戒轨 （浅绿）：情绪极度恐慌区，空头衰竭高发带。
0% 底部极值轨 （深蓝）：回溯周期内的绝对地板。
随着新 K 线的生成，整个框架会 滚动迭代 ，始终锚定最新的价格活动范围，确保参考坐标永不失效。
---
传统价格图表存在严重的 视角局限性 ，导致交易者频繁陷入误判：
“绝对值幻觉”与锚定效应 ：股价 100 元是高是低？脱离近期波动区间谈绝对价格毫无意义。本指标将价格转化为 0~100 的相对百分位数 ，消除了价格基数的干扰，让您客观评判当前价格是“相对高位”还是“相对低位”。
“区间失忆症”与近因偏好 ：人类大脑天然对最近 5~10 根 K 线赋予过高权重，极易遗忘前期关键的支撑与阻力结构。本指标通过固定窗口的滚动计算，强制将 过去 N 根 K 线的价格极值 醒目地绘制在当前图表上，纠正了这种认知偏差。
均值回归与极端磁吸理论 ：金融市场价格长期遵循 “极端值向中轴（50% 均衡线）回归” 的统计规律。当价格进入 89% 以上或 11% 以下的极端尾部区域时，统计概率上必然面临向 50% 中轴的牵引力。本框架为这种“牵引力”提供了精确的量化刻度。
---
本指标是 趋势过滤、盈亏比评估与动态止盈止损 的绝佳辅助工具。请勿将其视为独立入场信号，而应作为 “价格行为决策的量化底座” 。
3.1 基于市场环境的三种经典战法
【趋势跟踪战法】—— 适用于强势单边行情
当价格经过充分调整后，以放量大阳线有效突破 75% 强势分界轨 时，视为中期趋势由震荡转强的关键确认点。若后续价格回踩 75% 轨并获得支撑（收出长下影线），则为绝佳的 顺大势、逆小势 加仓机会。此时可将止损设于 62.5% 强界枢轴轨下方。
【均值回归战法】—— 适用于宽幅震荡行情
当价格快速冲高至 89% 超买轨 上方，且 K 线出现明显滞涨形态（如射击之星、看跌吞没）时，可视为短线高空机会，第一目标位看向 75% 轨，第二目标位看向 50% 中轴。反之，价格急跌至 11% 超卖轨 下方并出现止跌反转形态时，可视为短线低吸机会。
【突破回踩确认战法】—— 适用于关键阻力支撑转换
任何一条百分比轨道都具备动态支撑/阻力的属性。当价格自下而上突破某一轨道（如 62.5% 轨）后，若随后缩量回踩该轨道且未跌破，则说明该轨道已由阻力转换为支撑，此处是风险收益比极高的 “0 级入场点” （止损极小，空间极大）。
3.2 动态止盈与止损设置指南
波段多头持仓 ：可将 37.5% 弱界枢轴轨 设为最终的硬性离场线。只要价格在此轨之上，多头头寸便可安心持有，避免被早期震荡洗出。
短线空头持仓 ：可将 62.5% 强界枢轴轨 设为硬性止损线。一旦价格强势反抽并站上此轨，则空头逻辑被证伪，需果断离场。
3.3 参数动态调整建议（针对不同交易周期）
日线级别（中长线 / 波段） ：建议保持默认 252 （约 1 年交易日），用于捕捉年度大箱体的牛熊转换。
周线级别（大趋势 / 仓位布局） ：建议调整为 52 （约 1 年周线），用于识别超大周期的价格百分位极值。
小时 / 分钟级别（日内短线 / 剥头皮） ：建议调整为 50 ~ 100 ，过长的周期在分钟图上会导致框架钝化，失去短线参考意义。
---
4.1 最佳适用场景
流动性充裕的权益市场 ：沪深 300、中证 500、标普 500 等主流指数及成分股。
高流动性大宗商品与外汇 ：黄金、原油、欧元/美元等主要交易对。
高市值加密货币 ：比特币（BTC）、以太坊（ETH）等。
4.2 禁用与慎用场景（风控红线）
严禁用于上市不足 N 根 K 线的新股/次新股 ：尽管代码内置了自适应缩窄逻辑，但新股价格极不稳定，高低点极易被操纵，百分位框架参考价值极低。
慎用于连续无量涨跌停的极端行情 ：在极强的单边轧空或流动性枯竭的踩踏中，价格可能长期粘合在 100% 轨之上或 0% 轨之下，此时指标出现 “钝化” 现象，需立即切换至趋势跟踪指标（如 SAR 抛物线或均线系统）进行二次印证。
慎用于高度控盘的“庄股”或低成交量仙股 ：稀疏的成交导致价格跳跃性极大，计算出的区间极易失真。
---
本指标严格遵循 PulseWire 最佳实践， 完全不包含未来函数 ，所有信号均基于确定性的历史数据实时滚动计算。
5.1 自适应周期核心算法
系统优先读取用户设定的 `lookbackLength`（默认 252）。然而，当图表加载的品种上市天数不足时，引擎会自动触发保护机制：
effectiveLookback = math.min(i_lookbackLength, bar_index + 1)
该行代码确保指标在上市首日即能工作，且随着新 K 线增加，窗口期自然增长，直至达到用户设定的标准周期。
5.2 九宫格线性映射（百分位分割数学）
首先确定箱体极值与范围：
periodLow = ta.lowest(low, effectiveLookback) // 底部 0%
periodHigh = ta.highest(high, effectiveLookback) // 顶部 100%
priceRange = periodHigh - periodLow
随后基于 斐波那契数列与统计学标准差启发式阈值 进行非均匀切割：
priceL89 = periodLow + priceRange * 0.89 // 极值警戒
priceL75 = periodLow + priceRange * 0.75 // 强市分界
priceL625 = periodLow + priceRange * 0.625 // 黄金分割枢轴
priceL50 = periodLow + priceRange * 0.50 // 均衡中轴
// ... 下方对称切割同理
注：62.5% 与 37.5% 的选取来源于对 0.618 黄金分割率的整数微调，旨在提供比传统 61.8% 更为清晰且易于记忆的刻度。
5.3 图形渲染引擎优化（内存与性能管理）
为了避免在大量历史 K 线上重复绘制矩形和线条导致图表卡顿，引擎采用 “惰性删除与单次实例化” 策略：
if barstate.islast
// 仅当加载完成且运行至图表最右侧时触发绘制
box.delete(boxMain) // 先销毁旧句柄
line.delete(lineL100) // 清理旧线
// ... 重新创建新对象
所有标签采用 label.style_label_left 右对齐样式，确保在图表最右侧整齐排列，绝不遮挡最新的 K 线实体，同时提供精确至交易所最小报价单位（`format.mintick`）的实时读数。
---
它不是占卜未来的水晶球，而是衡量当下的卡尺。
在充满不确定性的金融市场中， “位置感” 是纪律执行的基石。`Market Compass` 为您提供的不是圣杯，而是一张永远保持更新的 战场态势感知地图 。请将它融入您现有的交易系统中，作为过滤低质量交易机会的第一道关卡。
---
本指标及此说明文件仅供教育及技术分析参考之用，绝不构成任何形式的买入、卖出或持仓建议。金融衍生品及证券交易蕴含巨大风险，过往价格结构及百分位分布不构成对未来走势的绝对保证。您必须结合自身财务状况、风险承受能力及独立研判做出交易决策，盈亏自负。作者不承担任何因使用本指标而产生的直接或间接损失。
---
如果您认可这套价格定位逻辑，欢迎点赞、收藏并关注！
期待您在评论区分享将该框架融入实战交易后的心得体会。
Market Compass - Dynamic Range Framework
Version: 1.0 | Type: Non-Predictive Price Structure Positioning Tool | Author:
The vast majority of trading losses stem not from incorrect directional judgment, but from a lack of "positional awareness" . This indicator addresses this core pain point — it does not tell you whether price will go up or down, but it does tell you "the precise coordinates of price on the map, at this very moment" .
---
This indicator is not a traditional moving average or momentum oscillator. Instead, it is a price percentile range positioning system based on a fixed lookback period . It uses the highest high and lowest low over the most recent N bars (default 252, corresponding to approximately one trading year) as natural boundaries, constructing a dynamic box grid spanning from 0% to 100%.
The grid is not evenly divided. It employs an asymmetric golden ratio and extreme-value anchoring methodology to precisely define 9 key horizontal threshold levels. These levels are cleanly overlaid on the main price chart using colored rectangular bands and real-time right-aligned floating labels:
100% Peak Threshold (Red): The absolute ceiling within the lookback period.
89% Overbought Warning Zone (Orange): Extreme euphoria zone; high probability of bullish exhaustion.
75% Bullish Boundary (Yellow): The bull-bear dividing line; breaking above signals medium-term strength.
62.5% Bull Pivot Threshold (Purple): Secondary retracement support level within an uptrend.
50% Equilibrium Axis (White): The value equilibrium line; a dense area of long-term capital cost.
37.5% Bear Pivot Threshold (Cyan): Secondary retracement resistance level within a downtrend.
25% Bearish Boundary (Light Blue): Breaking below signals a confirmed medium-term bearish trend.
11% Oversold Warning Zone (Light Green): Extreme panic zone; high probability of bearish exhaustion.
0% Floor Threshold (Dark Blue): The absolute floor within the lookback period.
As new bars are generated, the entire framework rolls forward iteratively , always anchored to the most recent price activity range, ensuring the reference coordinates never become obsolete.
---
Traditional price charts suffer from severe perspective limitations , leading traders into frequent misjudgments:
"Absolute Value Illusion" and Anchoring Bias : Is a price of $100 high or low? Discussing absolute price without reference to the recent trading range is meaningless. This indicator converts price into a relative percentile from 0 to 100 , eliminating the distortion of price magnitude and allowing you to objectively assess whether the current price is "relatively high" or "relatively low."
"Range Amnesia" and Recency Bias : The human brain naturally assigns excessive weight to the most recent 5–10 bars, easily forgetting key prior support and resistance structures. Through rolling window calculations, this indicator forcibly and prominently plots the price extremes of the past N bars on the current chart, correcting this cognitive bias.
Mean Reversion and Extreme Magnetic Attraction Theory : Financial market prices have long exhibited a statistical tendency to "revert from extreme values toward the center (50% equilibrium line)" . When price enters the extreme tail regions above 89% or below 11%, statistical probability dictates an inevitable gravitational pull toward the 50% axis. This framework provides precise quantitative刻度 for this "magnetic force."
---
This indicator serves as an excellent auxiliary tool for trend filtering, risk-reward assessment, and dynamic stop-loss/take-profit placement . Do not treat it as an independent entry signal; instead, regard it as a "quantitative foundation for price-action decision-making."
3.1 Three Classic Strategies Based on Market Context
【Trend Following Strategy】— For Strong Directional Markets
When price, after sufficient consolidation, breaks decisively above the 75% Bullish Boundary with a high-volume bullish candle, this serves as a key confirmation that the medium-term trend is shifting from consolidation to strength. If price subsequently retests the 75% level and finds support (forming a long lower wick), it represents an excellent "go with the macro trend, counter the micro pullback" add-on opportunity. In such cases, place your stop-loss below the 62.5% Bull Pivot Threshold.
【Mean Reversion Strategy】— For Range-Bound Markets
When price spikes rapidly above the 89% Overbought Warning Zone and simultaneously exhibits clear exhaustion patterns (such as shooting stars or bearish engulfing), this can be viewed as a short-term selling opportunity. The first target is the 75% level, and the second target is the 50% Equilibrium Axis. Conversely, when price plummets below the 11% Oversold Warning Zone and shows reversal signals, a short-term buying opportunity emerges.
【Breakout-Pullback Confirmation Strategy】— For Key Support/Resistance Transitions
Every percentage threshold possesses dynamic support/resistance properties. When price breaks upward through a given level (e.g., the 62.5% level) and subsequently retests that level on diminishing volume without breaking back below, this confirms that the level has successfully transitioned from resistance to support. This represents a highly favorable "Grade-A Entry Point" (minimal stop-loss, substantial upside potential).
3.2 Dynamic Stop-Loss and Take-Profit Placement Guide
Swing Long Positions : Use the 37.5% Bear Pivot Threshold as your ultimate hard exit line. As long as price remains above this level, you can confidently hold your long position, avoiding premature exits caused by early-stage volatility.
Short-Term Short Positions : Use the 62.5% Bull Pivot Threshold as your hard stop-loss line. Should price stage a strong rally and close above this level, the bearish thesis is invalidated, and you must exit decisively.
3.3 Parameter Adjustment Recommendations (By Trading Timeframe)
Daily Chart (Swing / Medium-to-Long Term) : Keep the default 252 (approximately one trading year), ideal for capturing annual bull-bear transitions.
Weekly Chart (Macro Trend / Position Sizing) : Consider adjusting to 52 (approximately one year of weekly bars) for identifying extreme percentiles within broader cycles.
Hourly / Minute Charts (Intraday / Scalping) : Consider adjusting to 50–100 . Longer lookbacks on lower timeframes cause the framework to become overly rigid, diminishing its short-term relevance.
---
4.1 Optimal Use Cases
Highly Liquid Equity Markets : CSI 300, S&P 500, major index constituents, and liquid individual stocks.
High-Liquidity Commodities and FX : Gold, Crude Oil, EUR/USD, and other major pairs.
Large-Cap Cryptocurrencies : Bitcoin (BTC), Ethereum (ETH), and similar assets.
4.2 Scenarios to Avoid or Use with Caution (Risk Red Lines)
Strictly avoid newly listed stocks with fewer than N bars of history : Although the code includes a built-in adaptive shortening mechanism, new issues are extremely unstable, and their highs/lows are vulnerable to manipulation, rendering the percentile framework nearly worthless.
Use with caution during continuous limit-up/limit-down extreme conditions : In powerful short squeezes or liquidity-driven crashes, price may remain persistently glued above the 100% level or below the 0% level. In such cases, the indicator becomes "blunted" , and you must immediately switch to trend-following tools (such as SAR or moving average systems) for secondary confirmation.
Avoid low-float "pump-and-dump" penny stocks : Sparse trading volume leads to erratic price jumps, causing the computed range to become highly distorted.
---
This indicator strictly adheres to PulseWire best practices and contains absolutely no future functions . All signals are computed in real time based on deterministic historical data.
5.1 Adaptive Lookback Core Algorithm
The system first reads the user-defined `lookbackLength` (default 252). However, when the loaded instrument has fewer total bars on the chart than the configured period, the engine automatically triggers a protective mechanism:
effectiveLookback = math.min(i_lookbackLength, bar_index + 1)
This single line ensures the indicator functions from the very first trading day, and the window gradually expands as new bars are added until it reaches the user's desired standard period.
5.2 Nine-Level Linear Mapping (Percentile Segmentation Mathematics)
The process begins by determining the box extremes and range:
periodLow = ta.lowest(low, effectiveLookback) // Floor at 0%
periodHigh = ta.highest(high, effectiveLookback) // Peak at 100%
priceRange = periodHigh - periodLow
The range is then divided using a heuristic blend of Fibonacci ratios and statistically inspired thresholds :
priceL89 = periodLow + priceRange * 0.89 // Extreme warning
priceL75 = periodLow + priceRange * 0.75 // Bullish boundary
priceL625 = periodLow + priceRange * 0.625 // Golden ratio pivot
priceL50 = periodLow + priceRange * 0.50 // Equilibrium axis
// ... Symmetrical lower-level calculations follow the same logic
Note: The selection of 62.5% and 37.5% is derived from a slight integer adjustment to the 0.618 golden ratio, intended to provide cleaner and more memorable reference刻度 than the traditional 61.8%.
5.3 Rendering Engine Optimization (Memory & Performance Management)
To prevent chart lag caused by repeatedly drawing rectangles and lines across numerous historical bars, the engine employs a "lazy deletion with single-instantiation" strategy:
if barstate.islast
// Only triggered when loaded and running at the rightmost edge of the chart
box.delete(boxMain) // Destroy old handles first
line.delete(lineL100) // Clean up old lines
// ... Then create new objects
All labels use the label.style_label_left right-aligned format, ensuring they line up neatly on the far right of the chart without ever obscuring the most recent price bars. Prices are displayed with precision down to the exchange's minimum tick size (`format.mintick`).
---
It is not a crystal ball for predicting the future; it is a caliper for measuring the present.
In the inherently uncertain financial markets, "positional awareness" is the cornerstone of disciplined execution. `Market Compass` does not offer you a holy grail; it offers you an ever-updating situational awareness map of the battlefield . Integrate it into your existing trading system and use it as the first filter to eliminate low-probability trade setups.
---
This indicator and its accompanying description are provided for educational and technical analysis purposes only. They do not constitute, and should not be construed as, any form of investment advice or recommendation to buy, sell, or hold any financial instrument. Trading securities and derivatives involves substantial risk of loss. Past price structures and percentile distributions do not guarantee future results. You are solely responsible for your own trading decisions, taking into account your financial situation, risk tolerance, and independent judgment. Neither the author nor the hosting platform accepts any liability for losses arising from the use of this indicator.
---
If you find this price-positioning logic valuable, please like, bookmark, and follow!
I look forward to hearing how you integrate this framework into your live trading. Feel free to share your experiences and feedback in the comments section below.
Indicator
Previous Day Pivot Path - Intraday Support ResistancePrevious Day Pivot Path - Intraday Support Resistance
Overview
Previous Day Pivot Path is an intraday reference-level study built from the confirmed OHLC values of the previous selected trading day. It plots the current day's central pivot and support/resistance levels, then records the first chart bar in which each level is reached and assigns a compact arrival rank.
The script is intended for traders and researchers who want to identify the current day's mathematically derived reference levels without converting them into buy/sell instructions. It does not predict whether a level will hold or break, and it does not present win-rate, profitability, or performance claims.
What makes this implementation different
1. First-arrival path instead of static lines only
Each tracked level begins the day as pending. When the selected price source first reaches it, the script records an arrival rank and can place a numbered badge at the corresponding time.
If more than one previously unreached level is reached in the same chart bar, those levels receive the same rank. OHLC bars do not reveal the true tick-by-tick order inside that bar, so the script deliberately avoids inventing an intrabar sequence that the available data cannot prove.
2. Reached-level fading and next-level focus
Reached levels can fade automatically. The nearest unreached level can receive stronger line emphasis and an optional translucent focus halo. After all displayed levels have been reached, the focus can fall back to the nearest level or remain inactive.
This visual hierarchy separates completed parts of the day's path from levels that remain unvisited, while preserving the exact horizontal prices.
3. Confirmed previous-day data
All daily formula inputs are requested from the last completed daily bar. Open time, close time, open, high, low, and close are all offset by one daily bar before they are used. The current developing daily high, low, or close is never used in the pivot formulas.
The script also checks that the completed daily session is chronologically aligned with the selected intraday source day before it initializes new levels or arrival events.
4. Source-session freshness protection
Three OHLC source modes are available:
- Automatic: uses chart-context OHLC on standard candles and standard-symbol OHLC on non-standard charts.
- Chart context: preserves the chart's ticker modifiers, session, adjustment, and chart-type context.
- Standard symbol: removes non-standard ticker modifiers and uses standard market OHLC.
When the selected standard source has no bar aligned with the current chart timestamp, the script does not reuse an old forward-filled OHLC value. Arrival events pause, and existing drawings remain fixed at the last valid source bar until aligned data becomes available again.
5. Session-aware day handling
The script uses a trading-day key suitable for markets whose sessions cross midnight. This prevents a simple calendar-date change from being treated as the session boundary on many overnight Forex and futures markets.
If the first loaded dataset begins after the selected source day's opening bar, the earlier first-arrival sequence is unknowable. For that one partial day, arrival tracking and open-dependent features are conservatively bypassed rather than reconstructed from incomplete history.
6. Time-anchored persistent drawings
Persistent lines, boxes, right-edge labels, and arrival badges use UNIX-time coordinates. This avoids relying on very old bar_index coordinates on dense second charts and keeps historical drawings independent of the number of bars elapsed since their creation.
7. Multiple formula families plus an editable research mode
The script includes:
- Traditional
- Classic
- Fibonacci
- Camarilla
- Custom research
The custom mode lets users select the pivot center and edit three previous-range multipliers. The multipliers are sorted from smallest to largest before assignment to R1/S1, R2/S2, and R3/S3.
8. Price-grid and duplicate-level controls
Calculated levels can remain raw, round to the nearest minimum tick, or round outward so resistance is rounded upward and support downward. When rounding produces the same price for multiple logical levels, the script can merge them into one line and one badge with a combined code such as P/R1.
9. Researchable arrival definitions
Users can define a first arrival with:
- Wick range
- Candle body range
- Confirmed close crossing
Optional tolerance can be exact, a number of ticks, or a percentage of the previous-day range. Gap crossings can be counted or ignored. Arrival ranking can follow only displayed levels, the selected depth, or all levels produced by the formula.
10. Deliberate chart hygiene
The default presentation prioritizes P, R1/S1, and then outer levels through width, line style, transparency, and optional reached-level fading. Right-edge labels support automatic text contrast and horizontal lane staggering when prices are close.
Optional context references include:
- Central Pivot Range (CPR)
- Previous-day high and low (PDH/PDL)
- Previous-day close (PDC)
- Current selected-source day open
- Opening bracket between the nearest displayed levels above and below the day open
- Compact session brief
All context elements can be disabled independently.
Formula reference
Let O, H, L, and C be the confirmed previous selected daily bar, and let Range = H - L.
Traditional
P = (H + L + C) / 3
R1 = 2P - L
S1 = 2P - H
R2 = P + Range
S2 = P - Range
R3 = H + 2(P - L)
S3 = L - 2(H - P)
Classic
P = (H + L + C) / 3
R1 = 2P - L
S1 = 2P - H
R2 = P + Range
S2 = P - Range
R3 = P + 2Range
S3 = P - 2Range
Fibonacci
P = (H + L + C) / 3
R1/S1 = P +/- 0.382 x Range
R2/S2 = P +/- 0.618 x Range
R3/S3 = P +/- 1.000 x Range
Camarilla
P = (H + L + C) / 3
R1/S1 = C +/- 1.1 x Range / 12
R2/S2 = C +/- 1.1 x Range / 6
R3/S3 = C +/- 1.1 x Range / 4
Custom research
The center can be HLC3, HLCC4, OHLC4, midpoint, or previous close. Three editable multipliers are applied symmetrically to the previous-day range after being sorted from smallest to largest.
Arrival timing
Confirmed bar
This is the reproducible default. An arrival is recorded only after the chart bar is confirmed.
Live bar
Live timing is available for wick arrivals. Intrabar-persistent state latches a wick touch across realtime updates of the open bar. Because all levels first reached inside the same chart bar share one rank, the script does not claim a tick-level order that bar data cannot establish.
Body and close-cross modes automatically use confirmed bars to avoid transient open-bar signals.
Non-standard charts
Heikin-Ashi, Renko, Kagi, Line Break, Point & Figure, and Range bars can be synthetic or approximate. Automatic mode uses standard-symbol OHLC for the level and event source on non-standard charts, but arrival events are paused by default. Users can explicitly allow them for research after accepting the chart-type limitation.
The script is designed for time-based intraday charts. Tick charts and daily-or-higher charts are intentionally rejected with a visible notice rather than processed with ambiguous session assumptions.
Language and user interface
English is the default dynamic chart language. Selecting 日本語 changes dynamic labels, tooltips, safety notices, session-brief text, and language-aware alert() messages. Input names remain short bilingual labels so both English and Japanese users can configure the study.
Key Japanese UI translations:
未到達 = Pending
到達 = Reached
確定足 = Confirmed bar
ライブ・ヒゲ保持 = Live wick latch
前日値幅 = Prior range
次の未到達 = Next unreached
準備完了 = Ready
ソース足なし = Source bar unavailable
日次データ整合待ち = Aligning daily data
合成足イベント停止 = Synthetic events paused
International level codes such as P, R1, S1, PDH, and PDL remain unchanged in both languages.
Alerts
Neutral alert conditions are available for:
- Any pivot's first arrival
- P, R1, S1, R2, S2, R3, and S3 first arrivals
- Confirmed close crossing above or below P
An optional language-aware alert() call can include the reached level codes, shared rank, symbol, timeframe, and selected calculation method. Alerts describe observable level events only; they are not trade recommendations.
Suggested workflow
1. Use a standard candlestick intraday chart for the most direct interpretation.
2. Keep Automatic, Traditional, Nearest tick, Confirmed bar, and Wick for the conservative defaults.
3. Select the desired level depth and optional previous-day references.
4. Enable live timing only when intrabar wick monitoring is required.
5. Create alerts from the neutral first-arrival or confirmed P-cross conditions as needed.
6. Use Market Replay and several symbols/session types before relying on customized settings.
Important limitations
- A previous-day pivot is a mathematical reference, not a prediction that price will reverse or continue.
- Data vendors can revise historical bars, and exchange session definitions can differ across instruments.
- Standard-symbol mode can intentionally have no aligned bar outside its selected session. In that case, events pause instead of carrying stale OHLC forward.
- The first loaded partial source day cannot provide a complete earlier arrival sequence.
- A chart bar cannot prove the order of multiple level touches inside that bar; those first touches share one rank.
- Live wick tracking reacts to realtime updates. Reloaded historical bars contain finalized OHLC, not the original tick stream.
- Synthetic chart bars may not represent executable market prices. Arrival tracking on such charts is disabled by default.
- The study does not provide entries, exits, position sizing, stop placement, or performance statistics.
日本語説明
概要
Previous Day Pivot Pathは、選択したデータソースの確定済み前日OHLCから、当日のP・R・Sを自動計算して描画する日中足向けインジケーターです。
単に水平線を表示するだけではなく、各水準へ当日初めて到達したチャート足を記録し、到達順を番号で表示できます。売買推奨、勝率、収益性、将来予測を提示するものではなく、当日の数理的な節目と到達経路を研究するためのツールです。
主な特徴
初回到達経路
各水準は当日開始時に未到達状態となり、選択した価格ソースが初めて到達すると順位を記録します。同じチャート足の中で複数水準へ初回到達した場合、その足の内部順序はOHLCだけでは証明できないため、すべて同順位とします。
確定前日OHLC
日足リクエストでは、時刻・始値・高値・安値・終値のすべてを1本前へオフセットして使用します。形成中の日足高安や終値はピボット計算に使いません。
ソース欠損時の安全処理
標準銘柄ソースに現在時刻と一致する足がない場合、過去のOHLCを現在足へ持ち越して判定しません。到達イベントを停止し、既存描画を最終有効ソース足で固定します。
夜間市場を考慮した日付管理
Forexや先物など、セッションが日付をまたぐ市場に対応するため、単純なカレンダー日ではなく取引日キーを使用します。
秒足で古くなった描画への耐性
長期間保持する線、ボックス、到達バッジ、右端ラベルはUNIX時刻座標で管理します。高密度な秒足でも、古いbar_index座標による制限へ近づきにくい設計です。
5種類の計算方式
Traditional、Classic、Fibonacci、Camarilla、Custom researchを選択できます。Custom researchでは中心値と3つの前日値幅倍率を変更できます。
到達判定の研究性
ヒゲ、実体、確定終値通過から選択でき、許容幅は厳密一致、ティック数、前日値幅比率から設定できます。ギャップ通過を到達扱いにするかも切替可能です。
視認性
到達済み水準のフェード、最寄り未到達水準の強調、フォーカスハロー、自動文字コントラスト、近接ラベルの横方向段組みを実装しています。
CPR、前日高安、前日終値、当日始値、始値ブラケット、セッション概要は個別に表示・非表示を変更できます。
推奨初期設定
OHLC source Automatic
Pivot method Traditional
Level rounding Nearest tick
Arrival timing Confirmed bar
Arrival basis Wick
Touch tolerance Exact
Arrival universe Displayed levels
Synthetic chart events Off
Auto-stagger labels On
Auto contrast On
Focus halo On
ライブ中のヒゲ到達を監視するときだけ、Arrival timingをLive barへ変更してください。実体・終値通過は安全のため確定足判定になります。
言語切替
Language / 言語でEnglishまたは日本語を選択できます。日本語へ切り替えると、チャート上の動的ラベル、ツールチップ、安全性メッセージ、セッション概要、言語連動alert()が日本語になります。
P、R1、S1、PDH、PDLなどの国際共通コードは両言語で同じ表記です。
重要な注意事項
- ピボットは数理的な参照水準であり、反転やブレイクを保証しません。
- 読み込み初日が選択ソースの日中途中から始まる場合、それ以前の到達順は復元できないため、その日だけ経路追跡を停止します。
- 1本の足内で複数水準へ触れた正確な順序はOHLCから判定できないため、同順位になります。
- 標準銘柄ソースのセッション外では、古い価格を流用せず到達判定を停止します。
- Heikin-Ashi、Renko、Kagiなどの合成足では、到達イベントを既定で停止しています。
- Live barのヒゲ到達はリアルタイム更新に反応します。再読み込み後の履歴足には最終OHLCが残り、当時のティック列そのものは残りません。
- 本インジケーターはエントリー、決済、ストップ、ロット、成績表を提供しません。 Indicator
Chart Narrator [verticetrading]An analyst that writes. Chart Narrator reads your chart and describes it in plain sentences — no cryptic numbers, no jargon.
◆ WHAT IT DOES
It turns the chart into a written briefing: main trend and whether the higher timeframe agrees, unusual calm or agitation in volatility, the last structural break in plain words, nearest tested support/resistance with distances in %, fresh candlestick patterns, and volume participation. Everything is summarized in a bias header with a conviction score ("BULLISH — 4 of 5 signals point the same way").
◆ HOW IT WORKS
Six evidence modules (trend + higher-timeframe confirmation, volatility ranking, market structure, merged pivot levels weighted by touches, candlestick patterns, volume vs its average) each produce a verdict and the numbers behind it. A narration engine turns them into sentences, stays silent when a module has nothing to say, and detects confluences between modules (e.g. a bullish pattern printed on a tested support) to flag higher-quality situations. With enough history it also adds a day-of-week tendency note with its sample size.
◆ HOW TO USE IT
Add it to any symbol and timeframe. Read the panel top to bottom: bias first, evidence after. Set the "Bias flip" alert to receive the full written analysis when the overall picture changes. Interface in English and Spanish.
◆ WHAT MAKES IT ORIGINAL
Indicators show numbers; this one explains itself. Every sentence cites its evidence, only confirmed bars are narrated (no repainting), and the panel says "mixed, no clear edge" when that is the truth.
◆ LIMITATIONS
It describes the present; it does not predict. Not financial advice.
────────────────────────
ESPAÑOL — El analista que escribe
Convierte el gráfico en un informe escrito: tendencia y si la temporalidad mayor la confirma, calma o agitación inusual de la volatilidad, la última ruptura estructural en palabras llanas, soporte/resistencia más cercanos con distancias en %, patrones de velas recientes y participación del volumen — todo resumido en un sesgo con puntuación de convicción ("ALCISTA — 4 de 5 señales apuntan en la misma dirección"). Seis módulos de evidencia alimentan un motor de redacción que calla cuando no hay nada que decir y detecta confluencias entre señales. Solo narra velas confirmadas (sin repintado). Interfaz en inglés y español. Describe el presente, no predice; no es asesoramiento financiero. Indicator
Support & Resistance Confluence Levels, Hold Record & ReversalOVERVIEW
Four lines. Two above price, two below. That is the whole chart.
Every other support/resistance tool has the opposite problem. It finds forty levels and leaves you to work out which two matter. Forty levels is not information, it is wallpaper — and a level you have to hunt for is a level you will not trade.
So this tool inverts the design. It does not ask "where are the levels?" It asks:
WHICH LEVEL WOULD I ACTUALLY TRADE, RIGHT NOW, AND WHY SHOULD I BELIEVE IT?
A price is only promoted to a level when SEVERAL INDEPENDENT METHODS AGREE ON IT. One method finding a level proves nothing — every method finds levels everywhere. The signal is AGREEMENT.
This is a research and framing tool. It is NOT a strategy, NOT a signal service, and NOT a validated edge.
THE SIX VOICES — four propose, two confirm
PROPOSERS. Each nominates candidate prices, independently:
◆ SWING PIVOT the classic. Where price actually turned.
~ KERNEL EXTREMUM the turning point of the SMOOTHED price (Nadaraya-Watson), which is the shape
rather than the noise. This is Lo, Mamaysky and Wang's method, and it finds
structurally different levels from a raw pivot. That independence is exactly
what makes agreement between the two worth something. Agreement between two
methods that make the same mistakes is worth nothing at all.
⇈ HIGHER TIMEFRAME a swing on the HTF. The level a bigger participant is watching.
▣ PRIOR PERIOD yesterday's high and low. Last week's high and low. The most watched prices on
any chart — and missing from almost every auto-S/R script on PulseWire.
CONFIRMERS. They do not nominate, they vouch:
▪ VOLUME NODE the level sits where volume actually transacted. Real business was done here,
not merely a turning point.
○ ROUND NUMBER the psychological grid.
Candidates within an ATR tolerance merge, and the merged level inherits every voice that spoke for it. A level needs MIN VOICES to exist at all. Everything below that is DISCARDED, not hidden. Then only the nearest two above and two below are drawn.
The label tells you why the level is there: "◆~▣▪ 4v held 3/4 24,247.00" — four independent voices, tested four times, held three.
AND THEN THE PART NOBODY DOES: WE TEST WHETHER CONFLUENCE ACTUALLY RANKS
"Levels are stronger when several methods agree" is one of the most repeated claims in technical analysis and almost nobody has ever checked it. It is checkable. So the panel reports:
High confluence (3+) +0.24R n=61 PROVEN
Low confluence -0.03R n=88
Control (unconditional) +0.02R n=240
DOES CONFLUENCE RANK? YES — more voices IS better
And the control is DIRECTION-MATCHED. Reversals at support are overwhelmingly LONG on a drifting index — and a long-biased event set compared against a 50/50 control is handed the drift for free and calls it an edge. Longs are compared only with control longs, shorts only with control shorts, and the control is then blended back using the events' OWN direction mix. It is a subtle trap and it will manufacture an edge out of nothing if you let it.
And the verdict is a TEST, not a comparison. High confluence is measured against low confluence with a Welch t-test, and the difference must clear |t| > 1.96 before it is allowed to be a finding. Below that, the panel prints the least satisfying answer there is — NO DIFFERENCE — because that is the honest one. A tool that reports a 0.02R gap as a verdict is not measuring anything, it is decorating.
If the extra voices do not rank on your instrument, then on your instrument they do not rank, and no amount of agreement between methods will change that. That row is the reason this script exists.
THE HOLD RECORD — and why "held 3/4" is not what most scripts mean by it
A TEST IS AN EPISODE, NOT A BAR. Price arrives at the level and the test stays OPEN until price LEAVES it — back the way it came (HELD) or straight through (BROKE). A bar that closes INSIDE the zone has resolved nothing and is counted as nothing.
Counting every touching bar as a completed test drops an entire consolidation into the denominator as failures, and manufactures hold rates near 10% that say nothing about the level and everything about the counter. An unresolved test is neither a hold nor a break, exactly as an unresolved trade is neither a win nor a loss.
AND A TEST IS AN APPROACH, NOT A BAR TOUCHING A BOX. Price exits the zone (HELD), the next bar dips straight back in — and without a re-arm rule that counts as a brand-new test. Chop sitting on a level then logs a hundred "tests" that were really one event. Measured live before this was fixed: 224 tests of a single level on a 5m chart, and hold rates that all landed between 61% and 75% no matter which level you looked at. A statistic that cannot tell any two levels apart is not measuring the levels — it is measuring the bar size. Price must now travel clear of the zone before the level can be tested again. One approach, one test.
The volume filter gates the SIGNAL and never the RECORD. A level that holds on thin volume still HELD. Quietly dropping it from the numerator while leaving it in the denominator is how a hold rate gets manufactured.
IF TWO ZONES OVERLAP, THEY ARE THE SAME LEVEL
The merge tolerance is held to at least the combined zone half-widths. Otherwise two levels a fraction of an ATR apart refuse to merge and then draw overlapping boxes anyway, and the geometry contradicts itself on the chart for anyone to see. It is a small thing that quietly tells you the tool was never looked at.
A LEVEL IS AN ANCHOR, NOT A TRAILING AVERAGE
Levels merge as new candidates arrive, and the merged price is a COUNT-WEIGHTED mean: the tenth candidate moves the level by a tenth of the gap, not half of it. This sounds like a detail. It is not. A level that moves halfway toward every new candidate will slide toward price — because price is where new candidates come from — until it is no longer an anchor at all, but a trailing average sitting in the middle of the action, "tested" on every swing. The maths here is the difference between a level and a moving average with extra steps.
Levels are retired by DISTANCE, and confluence buys REACH. A level far from price is useless however many voices it has; a level at price is what you are trading. But eviction cannot simply drop the weakest, either — every level is BORN with one voice, so a weakest-first rule kills every new level in the cradle, before it can earn a second, and the chart slowly fills with ancient far-away fossils while nothing can form where price actually is. Confluence buys a level the right to be further away. It does not buy it immortality.
THE REVERSAL TRADE — because nobody looks at a level to admire it
Price tests the level and closes back out. Entry at the CLOSE, stop beyond the level, target a fixed R multiple.
ENTRY IS THE CLOSE, for the event and for the control alike. A rejection is a SIGNAL, not a fill.
Entering at the level — a better price — while the control enters at the close hands every level a
free head start, and it would "win" without the level having done anything at all.
THE R MULTIPLE IS FIXED so that the event and the control are measured on IDENTICAL geometry. A
variable target against a fixed-target control is not a comparison: the near target is reached more
often AND resolves inside the grading horizon more often, so the two are not even being asked the
same question.
THE NEXT OPPOSING LEVEL is drawn too, and separately tested: is it reached before the stop, and HOW
FAR AWAY IS IT IN R? A hit rate with no distance attached is a fact about the distance, not about
the levels — a target half a unit of risk away being reached often proves nothing.
Signals fire only at the levels actually on screen. Every level keeps its record; only the ones you are watching can fire. You do not trade a level twelve levels away from price.
And when a level BREAKS, you are told. A level holding is the reversal; a level giving way is the other half of why anyone draws one. Breaks are marked with an x and carry their own alerts — reported as pure information, with no trade framed and no claim made, because the break is not what this engine calibrated. Saying so is cheaper than pretending otherwise.
NON-REPAINT, AND ITS HONEST COST
Pivots confirm some bars late. The kernel extremum confirms a half-window late — a centred kernel looks into the future, and we refuse to. So a level appears some bars AFTER the swing that created it. That lag is the price of not repainting and it is paid deliberately.
Levels, tests, holds, breaks, signals and every calibration event are computed on CONFIRMED bars only. The HTF read uses lookahead_off. Nothing is drawn and then moved.
DATA AND SCOPE
Any symbol, any timeframe. ATR-normalised throughout. Volume improves the score but is NOT required — without it the volume-node voice simply abstains rather than guessing.
HOW TO USE
0. Turn the KEY on once (Dashboard & theme > Show the key). It explains the six glyphs. Turn it off
again — you only need it the first time.
1. MIN VOICES is the one input that matters. 1 gives you the forty-line wallpaper every other S/R
script gives you. 2 requires agreement. 3 shows only the prices several independent methods
arrived at on their own. Raise it until the chart shows levels you would actually trade.
2. Read the hold record. "Held 3/4" tells you more than any colour ever will.
3. READ THE CONFLUENCE VERDICT BEFORE YOU WEIGHT ANY OF IT. If the voices do not rank here, a level
is a LOCATION, not a probability — treat it as context, not as a signal.
4. Wait for the rejection: price into the level, close back out, on real volume.
5. Entry, stop and target are drawn. They are arithmetic, not advice.
ALERTS
Support held · Resistance held · Any rejection · Support broke · Resistance broke
EXPORTS (Data Window — consume from other scripts via input.source())
EXP_Sup1, EXP_Sup2, EXP_Res1, EXP_Res2, EXP_SupVoices, EXP_ResVoices, EXP_Signal, EXP_Entry, EXP_Stop, EXP_Target, EXP_ConfluenceEdge
CONCEPT CREDIT
Support/resistance and polarity are long-standing public trading concepts with no single author; the written tradition runs through Charles Dow, Richard Wyckoff and Edwards & Magee.
The TRADING-RANGE BREAK — the formal S/R rule — was first tested at scale by William Brock, Josef Lakonishok and Blake LeBaron, "Simple Technical Trading Rules and the Stochastic Properties of Stock Returns", Journal of Finance 47(5), 1992. Their findings were later shown to be vulnerable to data-snooping (Sullivan, Timmermann and White, 1999) — which is precisely why this tool MEASURES the rule on your instrument instead of asserting it.
Nonparametric kernel regression for level detection is from Andrew W. Lo, Harry Mamaysky and Jiang Wang, Journal of Finance 55(4), 2000; the Nadaraya-Watson estimator is due to Nadaraya and Watson (1964). ATR — J. Welles Wilder. Triple-barrier forward labelling — Marcos Lopez de Prado. Welch's t-test — B. L. Welch.
The confluence gate, the voice model, the episode-based hold record, the confluence-ranking test and the direction-matched control are the author's own. Clean-room implementation; no third-party Pine code is reused. Not affiliated with, nor endorsed by, any of the above.
HONESTY AND LIMITATIONS
Calibration is IN-SAMPLE, with no costs or slippage, and uses overlapping windows. A proven in-sample edge is NOT a guarantee out-of-sample. Real fills, spreads and commissions will reduce it.
The confluence gate is one rule among many — a different tolerance gives different levels.
Confluence is TESTED here, not assumed. If the panel says the extra voices do not rank, then on this instrument they do not, and no amount of agreement between methods will change that.
Both barriers on one bar: the STOP is assumed first — conservative, and the only assumption that cannot flatter the result. Unresolved trades at the horizon are marked to market, not booked as losses. Nothing is marked PROVEN below t = 1.96, and nothing is rated at all below the minimum sample.
Nothing in this script predicts price.
DISCLAIMER
Research and educational tool only. NOT financial advice, NOT a recommendation, and NO guarantee of results. Entry, stop and target output is arithmetic, not advice. Trading carries risk of loss. Test out-of-sample and make your own decisions. The author accepts no liability for any use. Indicator
RSI Levels & Regime Map Heatmap & Cardwell Reversal SignalsOVERVIEW
RSI is the most-used oscillator in the world, and almost nobody trades it — because "RSI is 62" is not something you can place an order against.
This tool moves RSI onto price.
RSI IS INVERTIBLE. Wilder's smoothing can be solved backwards, so for any RSI value there is an EXACT price that would produce it on the next bar. Instead of "RSI is 62", the chart tells you:
Close above 24,278 -> RSI 70 (resistance)
Close below 24,193 -> RSI 30 (support)
Those are real levels. You can put a stop there. You can put a target there.
The script draws the full ladder (30 / 40 / 50 / 60 / 70, all configurable), shades the bands between them into a regime heatmap, measures the Cardwell range regime, marks Cardwell positive and negative reversals with projected targets, shows a multi-timeframe strip — and then does the thing nobody else does: IT FORWARD-TESTS WHETHER ANY OF IT ACTUALLY HOLDS.
This is a research and framing tool. It is NOT a strategy, NOT a signal service, and NOT a validated edge.
THE MATHS (exact, not an approximation)
RSI = 100 - 100/(1 + AG/AL), where AG and AL are the Wilder-smoothed average gain and loss.
For a target T, let RSt = T/(100 - T). Solving the next bar's RSI for the move x required:
an UP move needs x = (n-1) * (RSt*AL - AG)
a DOWN move needs x = (n-1) * (AL - AG/RSt)
Level = close + x. The up form applies when it is non-negative; otherwise the down form does.
This is algebra, not curve fitting. Feed the derived price back through RSI and you get the target value back exactly. The levels are not estimates — they are the precise prices at which the RSI state changes, recomputed every bar. The ladder breathes with volatility on its own: it tightens in quiet markets and widens in violent ones, with no smoothing parameter to tune.
WHY THESE PARTS ARE ONE TOOL (mashup rationale)
1. THE INVERSE-RSI LADDER — the core. Every rung is the exact price at which RSI would print a chosen value.
2. THE HEATMAP — the bands between the rungs, shaded by regime. It shows at a glance how far price must travel to change the RSI story, which is the one question the oscillator pane can never answer.
3. THE CARDWELL REGIME — Andrew Cardwell's observation: in a BULL market RSI holds roughly 40-80, and 40 becomes SUPPORT. In a BEAR market it holds 20-60, and 60 becomes RESISTANCE. So "RSI 40" means the OPPOSITE thing in the two regimes. A tool that ignores this will cheerfully tell you to buy oversold all the way down a trend. The regime here is MEASURED over a lookback, not assumed — and the rung the script watches follows the regime rather than a fixed number.
4. CARDWELL REVERSALS — the signal almost nobody implements. A POSITIVE REVERSAL is RSI making a LOWER low while PRICE makes a HIGHER low. That is the mirror image of classic divergence, and it is a CONTINUATION signal, not a trend reversal. A NEGATIVE REVERSAL is the bearish mirror. A measured target is projected from each.
5. THE HONESTY LAYER — everyone says RSI 30 is support. Nobody checks. Every level test and every Cardwell reversal is logged and graded with a triple barrier against an unconditional control.
Remove any one and you are left with a prettier RSI that still cannot tell you whether RSI works.
THE CALIBRATION — AND THE TWO TRAPS IT TOOK A LIVE TEST TO FIND
Two subtle biases can make a level tool look brilliant while it is doing nothing at all. Both are handled explicitly here, and both are worth understanding whichever tool you use.
TRAP 1 — THE FILL ADVANTAGE.
A support test fires when price dips INTO the rung and closes back ABOVE it. If you enter the event AT THE RUNG (below the close) but compare it with a control entered at the CLOSE, the event gets a strictly better fill on EVERY trade. It then "beats" the control by construction — not because the level held, but because it bought lower. That is a rigged comparison, and it produces a large fake edge.
THE FIX: the level test is treated as a SIGNAL, NOT A FILL. The event and the control enter at the SAME reference price — the bar's close. The only thing that differs is which bars were selected.
TRAP 2 — DIRECTIONAL DRIFT.
Indices drift upward. If level tests are mostly LONG while the control is 50/50, the events win on drift alone and prove nothing.
THE FIX: longs are compared only with control longs, shorts only with control shorts, then blended back using the events' OWN direction mix. The panel also reports the baseline drift directly, so you can see whether the instrument is simply going up.
The control is UNCONDITIONAL: the same trade geometry taken on arbitrary bars, selected by no signal at all. If the levels cannot beat that, they carry no edge.
Results are reported as EXPECTANCY IN R, not hit rate. A Welch t-test decides whether the difference is real or luck — the panel does not say PROVEN unless t > 1.96.
Other conventions, all chosen so the tool cannot flatter itself:
· Both barriers touched on one bar -> the STOP is assumed first.
· Expired trades are marked to market, not booked as losses.
· The level tested is the one computed at the END OF THE PREVIOUS BAR — the price a trader could actually have rested an order at. Using the current bar's own level would be a look-ahead.
· Everything is logged and resolved on confirmed bars only.
HOW TO USE IT
1. READ THE REGIME FIRST. In a bull regime the 40 rung is support and you are hunting long tests of it. In a bear regime the 60 rung is resistance. In neutral, the ladder is simply a map.
2. The rungs are LEVELS. Price closing through one changes the RSI state, by definition.
3. A CARDWELL REVERSAL is a continuation signal with a projected target.
4. READ THE CALIBRATION BEFORE YOU WEIGHT ANY OF IT — and read the baseline-drift row next to it. If level tests show no proven edge on your instrument, the ladder is a MAP, not a probability.
5. Entry, stop and target are drawn at the same price the calibration measures. They are arithmetic, not advice.
DATA / SCOPE
Any symbol, any timeframe. No volume required. The source is an input, so the ladder can be built from close, hlc3, or even another indicator's plot.
NON-REPAINTING
The ladder is computed from confirmed values and projects FORWARD — it is a statement about what the NEXT bar would need to do, so it necessarily moves as new bars arrive. That is a projection, not a repaint, and it is stated plainly rather than hidden.
Level tests are evaluated against the PREVIOUS bar's level, so no future information is used. Reversal pivots use ta.pivot* and confirm a few bars after the fact; once printed, they do not move. The calibration harness logs AND resolves on confirmed bars only, so its statistics cannot inflate intrabar.
HONEST LIMITATIONS — PLEASE READ
The ALGEBRA is exact. THE CLAIMS ABOUT RSI ARE NOT.
"RSI 30 is support" is folklore until it is measured, which is exactly why this script measures it — and why it is built to be able to return "not proven".
Calibration figures are IN-SAMPLE, with no costs or slippage, and use overlapping windows. A proven in-sample edge is NOT a guarantee out-of-sample. Real fills, spreads and commissions will all reduce it.
Cardwell's rules are discretionary in origin and are mechanised here in one particular way. A different mechanisation would give different numbers.
Small samples are unreliable even when they look good. If the edge is near zero, negative, or unstable across timeframes, the honest conclusion is that it is not there.
Nothing here predicts price.
CONCEPT CREDITS
Relative Strength Index and its Wilder smoothing — J. Welles Wilder Jr.
Range rules, positive and negative reversals, and the measured-move projection — Andrew Cardwell.
Triple-barrier forward labelling — Marcos López de Prado.
Welch's t-test — B. L. Welch.
The inverse-RSI level engine, the regime map, the unconditional direction-matched control and the significance testing are the author's own. Clean-room implementation; no third-party code is reused. Not affiliated with, nor endorsed by, any of the above.
DISCLAIMER
Research and educational tool only. NOT financial advice, NOT a recommendation, and NO guarantee of results. Indicators describe past behaviour; they do not predict the future. Entry, stop and target output is arithmetic, not advice. Trading carries a risk of loss. Test out-of-sample and make your own decisions. The author accepts no liability for any use of this script. Indicator
Dashboard Pro | RSI - Fib - S/R - VolumeOverview
MTF Dashboard Pro is a multi-timeframe confluence engine that scans four timeframes simultaneously — 15-minute, 1-hour, 4-hour, and daily — and evaluates four independent technical conditions on each one. When all conditions align in the same direction, the dashboard issues a high-conviction LONG or SHORT signal. Everything is displayed inside a professional color-coded table directly on your chart, with optional S/R lines and a projected Golden Zone overlay.
What makes this different
Most multi-timeframe dashboards simply display RSI or MACD values across timeframes and leave interpretation to you. This indicator goes further: it defines explicit bullish and bearish conditions for each metric, scores them per timeframe, and only triggers a signal when a configurable number of conditions agree. The result is a systematic, rules-based directional bias — not a subjective reading of scattered numbers.
The four conditions
Each timeframe is scored on these four independent tests:
1 — RSI Momentum (Default: 14-period)
RSI above 50 registers as bullish. RSI below 50 registers as bearish. This captures the underlying momentum direction without relying on overbought/oversold extremes, which lag in trending markets.
🟢 Bullish: RSI > 50
🔴 Bearish: RSI < 50
2 — Fibonacci Golden Zone (0.618 – 0.786)
Calculated from the highest high and lowest low of the last N candles (default: 20 bars). The Golden Zone sits between the 0.618 and 0.786 Fibonacci retracement levels of that range. Price position relative to this zone determines the condition:
🟢 Bullish: Price at or above the 0.618 level (inside or above the Golden Zone)
🔴 Bearish: Price below the 0.618 level (rejected from the zone)
The Golden Zone is drawn on the chart as a projected box extending 20 bars to the right of the current candle, with dashed borders at 0.618 and 0.786, and a dotted midline at 0.702.
3 — Support / Resistance Positioning
Strong Support is the lowest low of the lookback period. Strong Resistance is the highest high. The midpoint between them defines the range center.
🟢 Bullish: Price above the midpoint (upper half of range — strength)
🔴 Bearish: Price below the midpoint (lower half of range — weakness)
Support and Resistance lines are drawn on the chart starting from the exact candle where the high or low occurred, extending to the right of the current bar. A subtle zone band (ATR-based) highlights each level as a zone rather than a single line.
4 — Volume Confirmation (USDT-denominated)
Volume is calculated as volume × close to approximate USDT-denominated volume. This is compared against a simple moving average (default: 20 periods).
🟢 Confirmed: Current volume above the average
🔴 Not confirmed: Current volume below the average
Volume confirmation applies equally to both LONG and SHORT signals — high volume validates the move regardless of direction.
Signal logic
For each timeframe, the indicator counts how many of the four conditions are bullish and how many are bearish.
LONG ▲ — Triggered when the bullish count reaches the minimum threshold (default: 4 out of 4)
SHORT ▼ — Triggered when the bearish count reaches the minimum threshold
NEUTRAL — Mixed conditions, no clear directional consensus
You can lower the threshold to 3 for more frequent signals with slightly less conviction, or keep it at 4 for maximum confluence.
Dashboard table
The on-chart table displays 13 rows across 5 columns (one label column + four timeframe columns):
Row 1 — RSI value with color-coded background (green > 50, red < 50)
Row 2 — Golden Zone status: ABOVE, IN ZONE, or BELOW
Row 3 — Golden Zone price range (0.618 and 0.786 levels)
Row 4 — Strong Support price (green text)
Row 5 — Strong Resistance price (red text)
Row 6 — S/R Position: BULLISH or BEARISH
Row 7 — Volume USDT with formatted K/M/B suffix
Row 8 — Individual condition checklist (✓ or ✗ for each of the 4 conditions)
Row 9 — Score (e.g. "4/4 BULL" or "3/4 BEAR")
Row 10 — Final signal: LONG ▲ / SHORT ▼ / NEUTRAL
Every data cell is background-colored to show its directional bias at a glance. Hover over any label cell to see a tooltip explaining the logic.
Chart overlay
Strong Support and Strong Resistance are drawn as horizontal lines originating from the exact candle where the extreme price occurred within the lookback period. Each line includes a subtle zone band for visual clarity and price labels at the right edge.
The Golden Zone is projected as a filled box extending 20 bars to the right of the current candle. The box includes dashed borders at 0.618 and 0.786, a dotted midline at 0.702, and a centered "GOLDEN ZONE" label.
You can choose which timeframe's levels to display on the chart — Current, 15M, 1H, 4H, or Daily. When plotting a higher timeframe on a lower timeframe chart, bar offsets are automatically scaled to the correct chart positions.
Settings
Table Display
— Position: 9 options (Top/Middle/Bottom × Left/Center/Right)
— Text Size: Tiny, Small, Normal, Large
Indicator Settings
— RSI Period: Default 14 (range 2–100)
— S/R and Golden Zone Lookback: Default 20 bars (range 5–500)
— Volume SMA Period: Default 20 (range 2–200)
Signal Logic
— Minimum Conditions: Default 4 (range 1–4). Controls how many conditions must agree for a signal.
Chart Lines
— Show/Hide toggle for all chart drawings
— Timeframe selection for plotted levels
— Individual color pickers for Support, Resistance, and Golden Zone
— Line width and style (Solid, Dashed, Dotted)
— Show/Hide price labels
— Golden Zone fill toggle and transparency control
Alerts
10 pre-configured alert conditions:
— LONG and SHORT alerts for each individual timeframe (8 alerts)
— "Any TF LONG" — fires when at least one timeframe triggers LONG
— "Any TF SHORT" — fires when at least one timeframe triggers SHORT
Set these up in PulseWire's alert dialog to receive notifications when signals change.
Best practices
— Use this as a confluence filter alongside your own price action analysis, not as a standalone entry signal.
— When multiple timeframes show the same signal simultaneously, conviction is significantly higher than a single-timeframe signal.
— For crypto pairs, the Volume USDT calculation is most accurate. For forex and equities, the volume column still shows relative volume strength but does not represent actual USDT value.
— The 20-bar lookback on a 15-minute chart covers roughly 5 hours. On a daily chart, it covers 20 trading days. Keep this asymmetry in mind when comparing timeframe signals.
— Start with the default threshold of 4/4 to learn the indicator's behavior before experimenting with lower thresholds.
Disclaimer
This indicator is a technical analysis tool for educational and informational purposes. It does not constitute financial advice, and past performance does not guarantee future results. Always use proper risk management. Never risk capital you cannot afford to lose. The signals generated are mathematical calculations based on historical price and volume data and should be used as one component of a broader, well-tested trading strategy. Indicator
Fractal Support & Resistance Zones invincible]Fractal Support & Resistance Zones
Fractal Support & Resistance Zones is an advanced market-structure and price-reaction framework designed to identify, evaluate, and dynamically manage support and resistance zones derived from confirmed fractal pivots.
Unlike traditional support and resistance indicators that simply draw horizontal levels at swing highs and lows, this indicator treats every zone as a dynamic market structure object. Each zone develops through its own lifecycle based on price interaction, independent retests, reaction strength, penetration, estimated buying and selling activity, structural confirmation, trend alignment, and eventual support/resistance role reversal.
The objective is not simply to show where price previously turned.
The objective is to evaluate which zones are still technically relevant, which have gained confirmation, which are weakening, and which may provide better structural trade locations.
---------------------------------------------------------------------------------------------
Fractal-Based Zone Detection
The indicator identifies two independent classes of fractal pivots:
Weak Fractals
Shorter-length pivots designed to capture local price reactions and minor structural turning points.
Major Fractals
Higher-strength pivots based on a larger fractal window. These represent more significant swing highs and swing lows and receive greater importance within the zone-quality model.
Fractal support zones are created from confirmed pivot lows, while fractal resistance zones are generated from confirmed pivot highs.
The detection timeframe can be independently selected, allowing zones from a higher timeframe to be displayed on a lower-timeframe chart.
Higher-timeframe fractal data is requested with lookahead disabled to prevent future data from being intentionally introduced into the pivot calculation.
---------------------------------------------------------------------------------------------
Dynamic Support and Resistance Zones
The indicator creates price zones rather than single horizontal lines.
Markets rarely react from one exact price. Orders, liquidity, and previous positioning are often distributed across a price range. The zone model therefore attempts to represent the broader reaction area surrounding a fractal pivot.
Three zone-width methods are available:
ATR
Zone width is calculated from Average True Range and automatically adapts to market volatility.
Pivot Candle
The structure of the original fractal candle is used to determine the zone width.
Hybrid Candle + ATR
Combines pivot-candle structure with an ATR-based volatility limit.
The hybrid method is designed to prevent unusually large pivot candles from creating excessively wide support or resistance areas.
A minimum tick-based width can also be configured for instruments with very small price movements.
---------------------------------------------------------------------------------------------
Fractal Zone Clustering
Markets frequently produce several nearby fractal pivots around the same price area.
Drawing every pivot independently can create overlapping boxes and unnecessary chart congestion.
The indicator therefore includes a fractal clustering engine.
Nearby same-side fractals may be merged into a common structural zone when:
* They are within the configured ATR merge distance.
* The resulting merged zone does not exceed the maximum permitted ATR width.
* The maximum cluster count has not been exceeded.
* Fresh major zones are not being merged into previously tested or damaged zones when protection is enabled.
The cluster count becomes one component of the zone-quality model.
A cluster does not automatically mean a zone is strong. It simply indicates that multiple independent fractal structures developed around a similar price area.
---------------------------------------------------------------------------------------------
Independent Retest Detection
A major feature of the indicator is the distinction between bars inside a zone and independent zone retests.
If price remains inside a support or resistance area for several candles, those candles are not counted as multiple tests.
A new test is counted only after price:
1. Interacts with the zone.
2. Moves sufficiently away from the zone.
3. Travels the configured ATR reset distance.
4. Returns to the zone again.
This creates a more realistic retest model and avoids artificially increasing the test count during sideways congestion.
The label displays the number of independent tests recorded for each selected zone.
---------------------------------------------------------------------------------------------
ATR-Based Reaction Measurement
After an independent zone retest, the indicator measures how strongly price reacts away from the zone.
Reaction strength is normalized using ATR.
For a support zone, the engine measures upward movement from the reaction anchor.
For a resistance zone, the engine measures downward movement from the reaction anchor.
The strongest reaction generated by the zone is stored as its **Best Reaction ATR**.
Two configurable reaction thresholds are used:
Verified Reaction
The zone has produced the minimum ATR reaction required for technical validation.
Proven Reaction
The zone has generated a stronger ATR reaction and has also accumulated sufficient independent testing.
This prevents a zone from receiving a high structural status simply because price briefly touched it.
The market must demonstrate an actual directional response.
---------------------------------------------------------------------------------------------
Dynamic Zone Status System
Every zone is continuously classified according to its current structural condition.
FRESH
A newly created major zone that has not yet received an independent retest.
Fresh zones may represent relatively untouched structural areas.
WEAK
A zone originating from the shorter weak-fractal detection model.
Weak zones can still produce valid reactions but receive a lower fractal-grade contribution in the quality model.
VERIFIED
A zone that has been tested and remains structurally active.
Reaction behaviour and zone validation contribute dynamically to its score.
PROVEN
A zone that has accumulated multiple independent tests and generated a reaction exceeding the configured Proven Reaction ATR threshold.
Proven zones represent areas with demonstrated historical reaction behaviour.
DAMAGED
Price has penetrated a configurable percentage of the zone.
A damaged zone has not necessarily broken, but deeper penetration reduces its quality score.
BROKEN
Price has invalidated the zone according to the selected break-confirmation method.
Break confirmation can use either:
* Close Beyond Zone
* Full Candle Beyond Zone
Broken zones may optionally remain visible for historical analysis.
FLIPPED SUPPORT / FLIPPED RESISTANCE
A previously broken zone has confirmed a structural role reversal.
Previous support may become resistance.
Previous resistance may become support.
The indicator does not immediately flip a zone when price crosses it. A separate role-reversal confirmation process is required.
---------------------------------------------------------------------------------------------
Zone Damage and Penetration Tracking
Zone quality is not binary.
A support or resistance area may gradually weaken before it completely breaks.
The indicator continuously measures the maximum percentage of zone penetration.
For support, penetration is measured downward through the support area.
For resistance, penetration is measured upward through the resistance area.
When penetration exceeds the configured damage threshold, the zone is classified as ** DAMAGED
Damage also applies a progressive penalty to the quality score.
This means a deeply penetrated zone may remain technically valid while receiving a lower structural ranking.
---------------------------------------------------------------------------------------------
Support and Resistance Role Reversal
The indicator contains a dedicated zone-flip engine.
After a support or resistance zone breaks, the engine monitors whether price moves sufficiently beyond the former zone.
The broken zone must first establish separation from price using a configurable ATR distance.
Price must then return to the previous structural area.
Depending on the selected confirmation mode, the indicator can require:
Zone Reclaim Only
The opposite-side retest itself is sufficient.
Close Away
Price must close a configurable ATR distance away from the zone.
Rejection or Engulfing
The retest can be confirmed through rejection behaviour, an engulfing candle, or a sufficiently strong close away from the zone.
Once confirmed:
* Broken support can become resistance.
* Broken resistance can become support.
The zone is then reset into a new lifecycle as a flipped structural area.
---------------------------------------------------------------------------------------------
Estimated Buy and Sell Activity
The indicator includes an estimated directional volume model.
Because standard PulseWire volume does not directly provide true executed bid and ask volume for every market, buying and selling activity is estimated from candle position within the candle range.
A close nearer the candle high allocates a greater portion of volume to estimated buying activity.
A close nearer the candle low allocates a greater portion of volume to estimated selling activity.
The model can use:
* Pivot volume only.
* Pivot volume plus independent retest activity.
Selected zone labels display estimated activity as:
B 64% | S 36%
This should be interpreted as an estimated directional participation model rather than true exchange-level order-flow delta.
---------------------------------------------------------------------------------------------
Multi-Factor Zone Quality Model
Every zone receives a dynamic quality score from 0 to 10.
The score is not based on a single condition.
The model combines several structural factors.
Fractal Grade
Major fractals receive a stronger contribution than weak fractals.
Rejection Wick
The pivot candle's rejection wick is normalized against ATR.
Larger relative rejection can increase the origin score.
Independent Retests
The model evaluates how many genuinely independent zone tests have occurred.
Importantly, unlimited retests do not continuously improve quality.
Excessive testing can weaken a zone.
Reaction Strength
The strongest measured ATR reaction contributes to zone validation.
Estimated Volume Confirmation
Pivot volume participation and directional estimated activity contribute to the score.
Fractal Cluster
Multiple nearby fractals can increase structural confidence.
Freshness
Newer zones receive a greater freshness contribution.
As a zone ages, this component gradually decreases.
The weight of every major quality component can be adjusted by the user.
---------------------------------------------------------------------------------------------
Origin Score and Validation Score
Internally, the quality engine separates zone evaluation into two conceptual stages.
Origin Quality
Evaluates how the zone was created.
This includes:
* Fractal grade.
* Pivot rejection wick.
* Pivot volume participation.
* Fractal clustering.
* Zone freshness.
Validation Quality
Evaluates what price did after the zone was created.
This includes:
* Independent retests.
* Reaction strength.
* Directional estimated activity.
Fresh zones are influenced more heavily by origin quality.
As price begins interacting with a zone, validation behaviour receives greater influence.
This allows the quality score to evolve with market behaviour rather than remaining permanently fixed at zone creation.
---------------------------------------------------------------------------------------------
Retest Exhaustion Penalty
A common assumption is that more support or resistance tests always make a zone stronger.
This indicator does not use that assumption.
Repeated interaction may gradually consume resting liquidity around a price area.
After the configured number of retests, the indicator begins applying an excess retest penalty.
The penalty increases with each additional independent test.
As a result, a heavily tested zone may receive a lower quality score even if it has not formally broken.
---------------------------------------------------------------------------------------------
Congestion Penalty
Price remaining inside a zone for an extended period may indicate balance, absorption, or structural deterioration.
The indicator tracks consecutive bars interacting with each zone.
After the configured congestion threshold, a progressive quality penalty is applied.
This helps distinguish a clean rejection from prolonged price acceptance inside the area.
---------------------------------------------------------------------------------------------
Trend Regime Alignment
An optional EMA-based trend regime is included in the quality model.
Support zones located in an unfavourable bearish regime can receive a counter-trend penalty.
Resistance zones located in an unfavourable bullish regime can also receive a penalty.
The trend filter does not automatically delete zones.
Instead, it modifies their relative quality.
This allows historically valid support and resistance areas to remain visible while acknowledging the current directional regime.
---------------------------------------------------------------------------------------------
Market Structure Break Detection
The indicator includes an independent Market Structure Break, or **MSB**, engine.
Confirmed swing highs and swing lows are detected using a configurable pivot length.
A bullish MSB occurs when price closes above the latest eligible structural high with sufficient momentum confirmation.
A bearish MSB occurs when price closes below the latest eligible structural low with sufficient negative momentum confirmation.
Momentum is normalized using a Z-score calculated from recent price changes.
This reduces the number of minor structural crossings classified as meaningful breaks.
Each structural pivot can generate only one MSB event, preventing repeated labels from appearing after the same swing has already been broken.
---------------------------------------------------------------------------------------------
Zone-to-Structure Confirmation
Market Structure Breaks can also validate previously tested zones.
When a bullish MSB occurs, the indicator searches for a recently touched support zone.
When a bearish MSB occurs, it searches for a recently touched resistance zone.
The most recent eligible zone can receive structural confirmation.
A configurable quality bonus is then applied.
This creates a basic structural sequence:
Zone interaction → Price reaction → Market Structure Break
The intention is to distinguish zones that merely produced a temporary bounce from zones followed by a measurable structural shift.
---------------------------------------------------------------------------------------------
Premium and Discount Trade Location
The indicator uses the latest structural swing high and swing low to estimate the current swing midpoint.
The midpoint represents the 50% equilibrium level of the structural range.
When Premium/Discount grading is enabled:
* Support zones are favoured when positioned in the discount portion of the swing.
* Resistance zones are favoured when positioned in the premium portion of the swing.
This condition contributes to the displayed Trade Grade.
It does not remove zones from the chart.
---------------------------------------------------------------------------------------------
Trade Grade System
Selected zones receive a simplified structural trade grade.
Grade A+
Reserved for high-quality zones with strong alignment between:
* Zone quality.
* Trend regime.
* Premium/discount location.
* Low structural damage.
* Limited retest exhaustion.
Grade A
Strong-quality zones with favourable trend alignment and low damage.
Grade B
Moderate-to-strong structural zones that are not classified as weak fractals.
Grade C
Lower-quality but still technically visible zones.
Grade D
Zones with poor overall structural quality.
The Trade Grade is a contextual ranking system.
It is not an automatic buy or sell signal.
---------------------------------------------------------------------------------------------
Star-Based Quality Display
To make the detailed labels easier to read, the numerical quality model is represented using stars.
★★★★★ = Quality 8.0 or higher
★★★★ = Quality 6.0 to 7.99
★★★ = Quality 4.0 to 5.99
★★ = Quality 2.0 to 3.99
★ = Quality below 2.0
The stars provide a quick visual representation of the underlying 0–10 quality score.
---------------------------------------------------------------------------------------------
Compact Detailed Labels
Selected zones can display compact one-line labels such as:
VERIFIED SUP | B 64% | S 36% | ★★★★ | Tests: 2 | Grade A
The label contains:
* Current zone status.
* Support or resistance classification.
* Estimated buying activity.
* Estimated selling activity.
* Quality stars.
* Independent retest count.
* Structural Trade Grade.
Because displaying a detailed label on every zone can create significant chart congestion, two label modes are available.
Nearest + Strongest
Prioritizes the nearest support, nearest resistance, and the highest-quality remaining zones.
All Visible Zones
Displays labels for every currently visible zone.
The maximum number of detailed labels can also be controlled.
---------------------------------------------------------------------------------------------
Nearest Zone Highlighting
The indicator continuously identifies:
* The nearest active support below price.
* The nearest active resistance above price.
These zones can receive stronger border highlighting.
This makes the most immediately relevant structural areas easier to identify without removing historical zones from the chart.
---------------------------------------------------------------------------------------------
Structural Equilibrium Zone
The latest confirmed structural swing high and swing low are used to calculate a 50% equilibrium area.
The indicator plots:
* Swing origin.
* Swing destination.
* 50% midpoint.
* Configurable equilibrium zone thickness.
Before price interacts with the equilibrium area, the zone is displayed as the current structural midpoint.
After price touches the area, the indicator changes its state to:
Equilibrium touched · wait for structure
This is intended to remind the trader that equilibrium interaction alone is not necessarily directional confirmation.
Additional market structure may be required.
---------------------------------------------------------------------------------------------
Alert Conditions
The indicator provides alert conditions for important zone and market-structure events:
* New fractal support zone.
* New fractal resistance zone.
* Independent zone retest.
* Zone verified by ATR reaction.
* Zone reaching Proven status.
* Zone becoming Damaged.
* Zone break.
* Support/resistance role reversal.
* Bullish Market Structure Break.
* Bearish Market Structure Break.
These alerts can be used to monitor structural changes without continuously watching the chart.
---------------------------------------------------------------------------------------------
Suggested Interpretation
This indicator is designed as a market context and structural analysis tool.
A possible analytical workflow is:
1. Identify the nearest active support and resistance.
2. Review the zone's current status.
3. Check estimated buy/sell activity.
4. Evaluate the quality stars.
5. Review the independent test count.
6. Check whether the zone is fresh, validated, damaged, or exhausted.
7. Evaluate trend alignment.
8. Check premium or discount location.
9. Observe whether price produces a structural break after the zone reaction.
10. Use the Trade Grade as an additional contextual ranking.
No single factor should be interpreted independently.
A five-star zone can still break.
A damaged zone can still generate a reaction.
A weak fractal can still become structurally relevant.
The purpose of the model is to organize multiple price-action variables into a consistent framework.
---------------------------------------------------------------------------------------------
Important Volume Note
The Buy and Sell percentages displayed by this indicator are estimated directional volume statistics.
They are calculated by allocating candle volume according to the closing position within the candle's high-low range.
They do not represent true bid/ask volume, footprint delta, or exchange-level aggressive buying and selling.
The values should therefore be used as a relative activity estimate only.
---------------------------------------------------------------------------------------------
Non-Repainting Considerations
Fractal pivots require confirmation bars.
A zone is created only after the corresponding pivot has been confirmed by the selected fractal length.
Higher-timeframe fractal calculations use `lookahead_off`.
Therefore, historical zones should be interpreted from the point at which the fractal became technically confirmed rather than assuming the pivot was known at the exact swing candle in real time.
Market Structure Break conditions are also evaluated using confirmed price and momentum conditions.
---------------------------------------------------------------------------------------------
Final Note
Fractal Support & Resistance Zones is designed for traders who prefer **dynamic structural zones instead of static support and resistance lines**.
The indicator combines fractal structure, volatility-normalized zone construction, independent retests, reaction measurement, damage analysis, estimated directional activity, structural breaks, trend regime, premium/discount location, and role reversal into a unified zone lifecycle model.
It is intended to help answer three practical questions:
Where is the important price structure?
How has price behaved around that structure?
Is the zone gaining validation, remaining fresh, or gradually losing structural quality?
This indicator is intended for technical analysis and research purposes only. It does not constitute financial advice. Traders should independently evaluate market conditions and apply appropriate risk management.
Indicator
Fibonacci Levels Engine [StrixEDGE]What It Does
Fibonacci Levels Engine automatically detects the most recent swing high and swing low within a configurable lookback window, draws the standard Fibonacci retracement grid (0 %, 23.6 %, 38.2 %, 50 %, 61.8 %, 78.6 %, 88.6 %, 100 %) plus the 127.2 % and 161.8 % extensions, and projects every level into the future so you can see where price is heading relative to the structure.
What separates this indicator from a plain Fibonacci overlay is the Edge Analysis layer — three original components that work together to tell you how meaningful a given Fibonacci zone is right now, not just where it sits on the chart:
1. Edge Score (0–100) — A composite confluence gauge displayed in the dashboard.
2. Proximity Heatmap — Dynamic line opacity that makes levels glow as price approaches them.
3. ATR Volatility Band — A band around the Golden Zone midpoint that adapts to current volatility.
How It Works
Core: Swing Detection & Fibonacci Grid
The indicator scans the last N bars (default 20, configurable 5–300) to find the highest high and lowest low. It determines trend direction by comparing which extreme occurred first: if the swing low is further back in time than the swing high, the structure is bullish (price moved from low to high); otherwise it is bearish. Fibonacci ratios are then calculated from that range and drawn as horizontal levels from the swing origin to a user-defined projection length (default 30 bars into the future).
Two shaded zones highlight areas of interest:
- Golden Zone (0.618–0.786) — the highest-probability retracement area in classical Fibonacci theory.
- Deep Zone (0.786–0.886) — often the last line of defense before a full retracement.
Both zones, the 50 % midline, and the extension levels can be toggled on or off independently.
Edge Score — Confluence Gauge
The Edge Score combines three independent measurements into a single 0–100 reading:
RSI Momentum Alignment | 0–35 | In a bullish structure, a low RSI (below 35) scores highest because it signals oversold conditions near support. In a bearish structure, a high RSI (above 65) scores highest. Intermediate RSI values receive proportionally lower scores. |
| Proximity to Golden Zone | 0–35 | Measures the absolute distance between the current close and the Golden Zone midpoint as a ratio of the total Fibonacci range. The closer price is to the midpoint, the higher the score. |
| EMA Trend Alignment | 0–30 | Checks the stacking order of the 8, 21, and 55-period EMAs. A fully aligned stack (e.g., EMA 8 > EMA 21 > EMA 55 in a bullish structure) scores 30; partial alignment scores 20; misalignment scores 10. |
The resulting score is classified as STRONG (≥ 75), MODERATE (≥ 50), WEAK (≥ 25), or LOW (< 25) and displayed with a color-coded label in the dashboard. A high Edge Score means RSI, price proximity, and trend direction are all converging at the Fibonacci zone — not just that price touched a line.
Proximity Heatmap
Every Fibonacci level's line opacity is recalculated on each bar based on how far the current close is from that level. When price is near a level, the line becomes more opaque (visually brighter); when price is far away, the line fades. This is computed as a transparency value derived from the ratio of (distance to level) / (total Fibonacci range), scaled between 10 and 75. The effect lets you instantly see which levels are "active" without scanning numbers — the relevant lines stand out on their own.
ATR Volatility Band
A translucent band is drawn around the Golden Zone midpoint, extending ± 0.5 × ATR (default 14-period). This addresses a practical problem: a Fibonacci level is a single price, but real entries need a buffer that accounts for market noise. The band widens in volatile conditions and contracts in quiet ones, giving you a dynamic "fair value area" inside the Golden Zone rather than a fixed line.
Dashboard Panel
A compact table in the top-right corner of the chart displays:
- Trend — Current structural direction (Bull / Bear) with color coding.
- Edge — The composite Edge Score and its label.
- RSI — Current RSI value, color-coded for overbought/oversold extremes.
- G-Zone — Live status showing ✅ with the midpoint price when the close is inside the Golden Zone
or ⏳ Waiting when it is outside.
- ATR — Current Average True Range value.
- Range — The total Fibonacci range (swing high minus swing low).
Dashboard text size is adjustable (Tiny / Small / Normal / Large).
How to Use It
Identify the structure — Add the indicator to your chart. The dashboard immediately tells you whether the current swing structure is bullish or bearish and shows the Edge Score.
Watch the Golden Zone — When price pulls back toward the 0.618–0.786 area, check the dashboard: a high Edge Score (50+) means RSI and trend EMAs are aligned with the retracement, which increases the odds of a bounce. The G-Zone row will switch from ⏳ to ✅ when price enters the zone.
Use the Volatility Band for entries — Rather than placing a limit order on the exact 0.618 or 0.786 line, use the ATR band as your entry zone. It automatically adjusts to current volatility, giving you a wider buffer in choppy markets and a tighter one in clean trends.
Read the heatmap — Glowing lines tell you which levels price is currently interacting with. If a line is bright and the Edge Score is high, that level carries more weight. If the line is faded, price is far away and the level is not in play.
Settings Overview
- Pivot Lookback (5–300, default 20) — Number of bars scanned for swing high/low detection.
- Right Projection (5–200, default 30) — How far levels extend into the future.
- Golden Zone / Deep Zone / 50 % / Extensions — Toggle individual level groups.
- Edge Score Panel — Show or hide the dashboard.
- ATR Volatility Band — Show or hide the dynamic band.
- Proximity Heatmap — Enable or disable the distance-based line opacity effect.
- ATR / RSI Length — Periods for the ATR and RSI calculations used in the Edge Score and Volatility Band.
- Style — Full color customization for bullish/bearish, zones, bands, levels, labels, and line width.
Set alerts — Four built-in alert conditions are included:
- Price enters the Golden Zone (0.618–0.786)
- Price enters the Deep Zone (0.786–0.886)
- Edge Score reaches 75 or above (strong confluence)
- Price crosses the 0 % or 100 % level (breakout / full retracement) Indicator
Potential Well MapOverview
A volume or time profile tells you where price spent time. Potential Well Map tells you the forces acting at each level. It models the market as a particle drifting in a one-dimensional energy landscape and estimates that landscape directly from recent price action — the local drift (average next move) and diffusion (variance of the next move) at each price level — then integrates them into a potential curve. Its valleys are attractors (dynamical support/resistance that pulls price in); its peaks are barriers (levels price is repelled from). Two levels with identical occupancy can be opposite in dynamics — one an attractor, one a barrier — and this map tells them apart. It is a descriptive structure-and-risk map, not a predictive signal.
Why these components are ONE tool (mashup justification)
This is a four-stage chain where each stage produces something the previous one can't, and the honesty layer keeps the whole thing accountable:
Drift + diffusion per level — the raw forces. For every price bin, exponentially-decayed accumulators track the count, sum, and sum-of-squares of the next one-bar move that started there, giving the conditional first two moments (drift and diffusion) with recent regime weighted most. This is O(N) per bar — no window rebuild, no timeout.
The potential curve — the integral of drift ÷ diffusion. This turns the raw forces into a landscape whose valleys and peaks are attractors and barriers. It is the object an occupancy profile fundamentally cannot produce, because occupancy measures time spent, not the pull at a level.
Escape pressure — a bounded 0–100 breakout gauge derived from the remaining wall height between price and the nearest barrier. Because the potential is already diffusion-normalized, the escape factor is a clean exponential of the wall height, and it concentrates toward 100 as price approaches a wall.
The calibration harness — the honesty layer. When a barrier escape is flagged, did price actually travel that way more often than the unconditional base rate? It reports Hit / Base / Edge, resolved forward on confirmed bars only. The forces are a picture; the harness is the proof. Remove any one stage and the map either asserts structure it never tested, or shows a level with no dynamics behind it.
How it works
Price is detrended into a coordinate x = ln(price) − ln(slow anchor) so the distribution stays roughly centred as price trends. A grid of x-bins spans a few volatility units either side of zero. For each bin, the decayed accumulators build drift and diffusion; neighbour bins are sample-weighted-smoothed; the force (drift ÷ diffusion) is integrated into the potential; valleys and peaks that clear a prominence margin are marked as wells and barriers; and the escape pressure to each adjacent barrier is computed. Bins with too few effective samples are greyed out rather than trusted.
How to use it
Read the landscape as context. The green valley line is the active attractor — a mean-revert target. The dashed red lines are the barriers above and below. The shaded box is the expected range of a stiff well. In the dashboard, the escape pressures rise toward 100 as price nears a wall; a pin (fade-to-mean) is flagged only when price sits mid-well in a stiff, bounded valley, and an escape is flagged when price crosses a barrier after that side's pressure was already elevated. Watch the Edge row: a positive, matured Edge means escapes have led price on this instrument; near-zero means treat the map as structure only, not a trigger. It is never a standalone signal.
Universal & non-repainting
The source is an input and everything is self-scaling (vol-scaled grid, detrended coordinate), so it runs on any symbol and timeframe; defaults suit a liquid index/futures intraday chart. All statistics use closed past bars only — both the drift/diffusion accumulators and the calibration harness update solely on confirmed bars, so their numbers never inflate intrabar. The displayed landscape naturally evolves bar to bar because it is a live estimate, not a fixed level; confirmed escape and pin marks settle on the close of their bar. Edge figures are in-sample, close-to-close, with no costs — a study aid, not a backtest.
Originality
The building blocks are public physics and statistics: stochastic drift-diffusion dynamics, conditional-moment estimation of the drift and diffusion coefficients, and escape-rate theory. What's original is the application to a price series as a live, decayed, per-level energy landscape — the detrended coordinate, the exponential-memory conditional-moment accumulators, the diffusion-normalized potential integral, the prominence-gated well/barrier detection, the escape-pressure gauge, and the forward-calibration harness that scores escapes against their base rate. This is a clean-room implementation; no third-party Pine code is reused.
Concept credits
Stochastic drift-diffusion (Langevin) dynamics and the Fokker–Planck description of a probability landscape — Paul Langevin, Adriaan Fokker, Max Planck
Estimating drift and diffusion from the conditional moments of increments (Kramers–Moyal expansion) — Hendrik Kramers, José Enrique Moyal; exposition after Hannes Risken
Barrier escape / escape-rate theory — Kramers' escape-rate framework
Forward base-rate calibration discipline — standard out-of-sample evaluation practice
Disclaimer
Research and educational tool only. Not financial advice, no recommendation, no guarantee of results. It is an effective, empirical 1-D approximation of a memoryful, multi-factor market — treat "escape pressure" as a relative, normalized gauge, not a literal probability. Estimates are noisy where samples are sparse (the greyed bins). Indicators describe past behaviour; they do not predict the future. Trading carries risk of loss. Test out-of-sample and make your own decisions. The author accepts no liability. Indicator
Support - Resistance & Fibonacci [StrixEDGE]StrixZONE automatically detects Support and Resistance zones from price structure and overlays Fibonacci retracement levels — with a deliberate visual separation between the two. S/R zones are drawn historically (left of current price), while Fibonacci levels project into the future (right of current price). This separation ensures zero overlap and a clean, readable chart.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW IT WORKS
The indicator operates on two independent analytical layers:
LAYER 1 — SUPPORT & RESISTANCE (Historical)
Automatically detects swing highs and swing lows using configurable pivot lookback detection. The most recent three resistance levels (R1, R2, R3) and three support levels (S1, S2, S3) are tracked and displayed as colored zones extending across the historical portion of the chart, stopping at the current bar.
R1/S1 is the most recent and visually strongest. R2/S2 and R3/S3 progressively fade, reflecting their age and diminishing relevance. Resistance zones are red, support zones are teal. Each zone has a configurable thickness based on ATR, creating a price band rather than a single line — because in practice, support and resistance are zones, not exact prices.
LAYER 2 — FIBONACCI RETRACEMENT (Forward Projection)
Calculates the highest high and lowest low over a 120-bar lookback and draws seven standard Fibonacci levels between them: 0%, 23.6%, 38.2%, 50%, 61.8%, 78.6%, and 100%. All levels project forward from the current bar by a configurable number of bars (default 20), showing where key retracement levels sit ahead of price.
The 50% and 61.8% levels are drawn with thicker solid lines. All others use thinner dashed lines. The 50%–61.8% region is highlighted as the Golden Zone — the area where retracements most frequently find support or resistance in trending markets. Each level displays its exact price at the right edge.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
VISUAL SEPARATION — WHY IT MATTERS
Most indicators that combine S/R with Fibonacci draw everything on top of the same price area, creating visual clutter that makes the chart harder to read. StrixZONE deliberately separates the two layers in time:
→ S/R zones occupy the left side of the chart (historical price action where the levels were established)
→ Fibonacci levels occupy the right side (projected forward where price is heading)
→ The current bar is the boundary — S/R stops here, Fibonacci starts here
This means you can see at a glance where historical structure sits versus where retracement math says the next key levels are. When a Fibonacci level aligns with a nearby S/R zone, that confluence is immediately visible without the two drawing systems overlapping.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SUPPORT & RESISTANCE DETAILS
Detection uses the standard pivot high/low method with a configurable lookback (default 10 bars). A swing high requires the bar's high to be higher than all bars within the lookback window on both sides. The same logic applies in reverse for swing lows.
Levels shift automatically as new pivots are detected. When a new resistance pivot forms, R1 becomes R2, R2 becomes R3, and the new level takes the R1 position. This ensures the most current market structure is always prioritized.
Visual hierarchy:
→ R1 / S1 — most opaque, largest label (most recent, most relevant)
→ R2 / S2 — slightly faded (still relevant but older)
→ R3 / S3 — most faded (historical context, may be invalidated)
Zone width is ATR-based (default 0.2× ATR), so zones automatically adapt to the instrument's volatility. A high-volatility asset gets wider zones; a stable asset gets tighter zones.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
FIBONACCI DETAILS
Levels are calculated from the absolute highest high and lowest low over the lookback period (default 120 bars). This captures the dominant price range for retracement analysis.
All seven levels are drawn as horizontal lines projecting right from the current bar:
→ 0% and 100% — range boundaries (dashed, subtle gray)
→ 23.6% and 78.6% — minor retracement levels (dashed)
→ 38.2% — standard retracement (dashed)
→ 50% — midpoint (solid, thick, yellow)
→ 61.8% — golden ratio (solid, thick, orange)
The Golden Zone (50%–61.8%) is filled with a translucent highlight and labeled. This is the area where price most commonly reverses during healthy retracements in trending markets.
Each level includes a price label at the right edge showing the percentage and exact price value, making it easy to set orders at these levels.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DASHBOARD
A compact table in the top-right corner displays:
→ R1 — nearest resistance price
→ S1 — nearest support price
→ FIB 50% — the midpoint price for quick reference
→ POSITION — current price as a percentage of the Fibonacci range (e.g., 72% means price is in the upper portion of the range)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SETTINGS
Support & Resistance:
• Pivot Lookback (default 10) — bars required on each side to confirm a swing. Higher values detect fewer but more significant levels.
• Zone Width (default 0.2 ATR) — thickness of each S/R zone. Increase for wider zones on volatile instruments.
Fibonacci:
• Fibonacci Bars Right (default 20) — how far the levels project into the future.
• Golden Zone toggle — show or hide the 50–61.8% highlight.
Display:
• Show S/R Zones — toggle the entire S/R layer.
• Show Fibonacci — toggle the entire Fibonacci layer.
• Show Dashboard — toggle the status table.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHAT MAKES THIS ORIGINAL
StrixZONE is not simply S/R lines drawn next to Fibonacci lines. Its originality lies in the deliberate temporal separation: S/R zones render historically from where they were established, while Fibonacci levels project exclusively into the future. This design choice eliminates the visual clutter that occurs when both systems draw over the same price bars — a problem common to multi-layer overlay indicators. The ATR-adaptive zone width, the three-tier visual hierarchy for level relevance, and the clean forward projection of Fibonacci create a tool that is structurally distinct from standard S/R or Fibonacci indicators.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
RECOMMENDED USE
Designed for all timeframes and all markets with OHLC data: crypto, forex, stocks, indices, commodities. Particularly effective on 15-minute to 4-hour charts for day and swing trading. Works well as a standalone structural analysis tool or alongside momentum indicators like StrixEDGE or StrixPULSE.
Look for confluence: when a Fibonacci level (especially 50% or 61.8%) sits near an S/R zone, that price area carries double significance as a potential reversal or breakout point.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ALERTS
Two alert conditions available:
→ Resistance Breakout — price closes above R1
→ Support Breakdown — price closes below S1
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DISCLAIMER
This indicator is a technical analysis tool, not financial advice. No indicator guarantees profitable outcomes. Past performance does not indicate future results. Always apply proper risk management. Indicator
RSI Core Levels Heatmap [BigBeluga]🔵 OVERVIEW
The RSI Core Levels Heatmap turns the standard Relative Strength Index (RSI) indicator into powerful support and resistance lines drawn directly on your main price chart. Instead of forcing you to constantly look down at a separate oscillator window, this script automatically finds hidden momentum levels and projects them right where you trade, helping you spot key reversal floors and ceilings instantly.
🔵 FEATURES
The system uses a smart layout tracking engine to map momentum without cluttering your screen:
1 — Momentum-Mapped Support & Resistance Lines
Signal Line Crossover Alerts: The indicator tracks momentum changes using a smooth Signal Line Length . When the raw RSI line crosses above or below this signal line, it triggers a setup.
Smart Price Capture: The moment a crossover happens, the engine looks back at the last 10 candles. If it is a bullish bounce, it finds the low price; if it is a bearish drop, it grabs the high price.
Direct Chart Overlay: It takes those key prices and draws clean support or resistance lines right on your main chart with clear labels.
2 — No-Clutter Overlap Protection Logic
Collision Checker: To stop your chart from looking like a messy spiderweb, the indicator checks if a new line is being drawn too close to an old one.
Duplicate Blocking: If a new level lands directly on top of an existing active zone, the script blocks it automatically to keep your trading area perfectly clean.
// Strict Collision Box Overlap Detection Matrix
is_overlapping_existing_block(high_val, low_val) =>
overlap = false
if array.size(activeBlocks) > 0
for i = 0 to array.size(activeBlocks) - 1
BlockLevel item = array.get(activeBlocks, i)
if (high_val <= item.topPrice and high_val >= item.botPrice) or (low_val >= item.botPrice and low_val <= item.topPrice) or (high_val >= item.topPrice and low_val <= item.botPrice)
overlap := true
break
overlap
3 — Active Line Lifecycle & FIFO System
Automatic Extension: All active, unbroken support and resistance lines automatically stretch forward on every new candle so they stay fresh.
Broken Line Changes: When price actions breaks through a line, the script instantly changes its style to a thin, grey dashed line and stops tracking it. This shows you exactly where historical levels failed.
Levels Heat Color: Each support and resistance level color intense is based on the rsi value at the moment level was created.
FIFO (First-In, First-Out) Lag Protection: To keep your PulseWire running fast without any lag, you can set a Max Active Levels & Labels limit. When you reach this cap, the oldest lines drop off the chart first (First-In, First-Out) to make room for new ones.
// Object Array State Lifecycle Management Snippet
if array.size(activeBlocks) > 0
for i = array.size(activeBlocks) - 1 to 0
BlockLevel item = array.get(activeBlocks, i)
bool broken = item.isBull ? (close < item.botPrice) : (close > item.topPrice)
if broken
label.delete(item.lvlLabel)
line.set_style(item.lvlLine, line.style_dashed)
line.set_color(item.lvlLine, color.gray)
line.set_width(item.lvlLine, 1)
array.remove(activeBlocks, i)
else
line.set_x2(item.lvlLine, bar_index)
label.set_x(item.lvlLabel, bar_index)
4 — Gradient Heatmap Ribbon & Proximity Dashboard
Color-Changing Ribbon blocks: The bottom sub-pane features a smooth gradient ribbon that tracks market extremes. It lights up bright green during deep oversold conditions, bright red when overbought, and turns yellow during tight consolidations ( Show Midline Squeeze Zone ).
Distance Telemetry HUD Table: A clean on-screen table calculates exactly how close the current price is to your nearest active support or resistance level in points and exact percentages.
🔵 HOW TO USE
Using this simple multi-layer blueprint helps you manage setups step-by-step:
Trading Reversals and Bounces: Watch the chart when price falls down toward a green support line. If the Dashboard Table shows the distance getting very close to 0% and the bottom ribbon is flashing deep green (oversold), look for a long bounce trade off the level.
Managing Risk and Trailing Stops: If you enter long at a support line, use that level as your risk floor. If price flushes below it, the indicator will instantly turn the line grey and dashed, letting you know the setup is invalid and it is time to cut the trade.
Spotting Squeeze Breakouts: When the bottom ribbon stays yellow, it means the market is squeezing sideways. Watch your distance dashboard closely; when price breaks out of the squeeze and flies toward your outer lines, you can ride the explosive momentum expansion.
🔵 NOTES
Why this implementation is unique:
It saves screen space by turning abstract momentum data from an oscillator below into highly accurate, tradeable price targets up on your main chart.
The overlap blocker prevents multiple lines from bunching together, keeping your chart clean and easy to read.
The automated FIFO memory cleaning system makes sure the script stays fast and lightweight, no matter how many bars are loaded on your chart.
Indicator
