BEDROCK Gated Macro Spot Cycle ModelBEDROCK condenses several independent long-term Bitcoin valuation models into a single transparent 0–100 score, then maps that score onto a seven-tier ladder running from deep value to cycle-top risk — with capitulation and euphoria gates that hold back the two most common false signals at each extreme. It is built for spot investors making multi-month and multi-year allocation decisions, not for short-term trading.
The reference card below shows how to read the model and how each tier behaves:
█ WHAT IT DOES
BEDROCK answers one question: where does price sit inside its macro cycle right now? Rather than a single oscillator, it scores a basket of slow-moving valuation measures, normalizes each to a common 0–100 "cheap → expensive" scale, blends them into a weighted composite, and classifies the result into an actionable tier with a suggested accumulation or distribution size. A higher composite means greater long-term value and lower risk; a lower composite means the market is stretched and risk is rising.
█ HOW IT WORKS
The composite is built from four independent blocs, any of which can be reweighted or disabled:
Trailing cost-basis bloc — price relative to the 200-week SMA, the 2-year SMA, and the 200-day SMA (Mayer Multiple). These three are deliberately collapsed into a single averaged, bounded factor so the moving-average family is represented once and cannot dominate the score through collinearity.
Drawdown from all-time high — how far price has fallen from its peak. The heaviest-weighted leg by default.
Weekly RSI — long-term momentum, as secondary confirmation.
MVRV Z-Score (optional) — an on-chain valuation leg you can enable and feed from an external source.
Each metric is mapped to 0–100 through its own linear calibration between a deep-value anchor and an expensive anchor, so every leg speaks the same language before being combined. Weights are auto-renormalized over whatever blocs are actually available — so the model stays coherent on early history where the 200-week isn't yet populated, or when MVRV is turned off. It simply reweights the parts it has.
█ THE TWO GATES — THE CORE IDEA
A raw valuation score has two classic failure modes: it screams "generational buy" on the first leg down of a bear market, and it screams "top" every time price gets mildly extended. BEDROCK addresses both with directional gates that only ever cap the tier toward the middle — they never fabricate a signal, and they never block the core accumulate or trim reads.
Capitulation gate (bottom) — the two deepest tiers stay locked until the market shows genuine capitulation. Generational requires a large drawdown from the all-time high (or a deeply negative MVRV-Z); Deep Accumulation requires price at or below its 200-week basis. Until then the score is capped at Accumulation, so you keep buying value without prematurely committing everything.
Euphoria gate (top) — the two riskiest tiers stay locked until multiple independent overheating signs agree across the 200-week multiple, weekly RSI, the Mayer Multiple, and MVRV-Z. Euphoria requires at least one confirmation; Cycle Top requires at least two. This is what stops the model from calling a top on every rally.
Because both gates only cap toward neutral, accumulation signals are never suppressed and trim signals are never suppressed. The gates restrain only the extreme calls, and only until the evidence is actually there.
█ READING THE INDICATOR
Composite line — the 0–100 score, colored by its current tier.
Background — shaded by tier for at-a-glance cycle context.
Threshold lines — the tier boundaries.
Markers — gated triangles mark transitions into accumulation tiers (up) and distribution tiers (down).
Data table — live composite, current tier, suggested action, both gate states, and every underlying metric (200W and 2Y multiples, Mayer, drawdown, weekly RSI, MVRV).
█ THE SEVEN TIERS
Generational Value — extremely rare deep value; aggressive accumulation.
Deep Accumulation — excellent value; size up.
Accumulation — good value; keep building.
Neutral / Hold — fairly valued; hold.
Expensive / Trim — above fair value; begin scaling out.
Euphoria / Distribute — high risk; distribute and protect profit.
Cycle Top / Exit — extreme; high-probability macro top.
Each tier also outputs a suggested DCA-in or trim-out multiplier, so the signal is sized rather than binary.
█ HOW TO USE IT
Use it on Bitcoin spot or index charts such as BITSTAMP:BTCUSD or $BINANCE:BTCUSDT.
Weekly is the primary timeframe; daily works as a secondary view.
Accumulate through tiers 1–3, hold in tier 4, scale down in tiers 5–6, and treat tier 7 as exit territory.
Built-in alerts fire on entry into each accumulation and distribution tier (gated).
█ WHAT MAKES IT ORIGINAL
BEDROCK is not a single valuation ratio dressed up as an oscillator. The combination is the point: a transparent additive composite over independent metrics, a deliberate collinearity fix that collapses the moving-average family into one bounded bloc, a dual directional-gate system that suppresses the two most common false signals at both extremes without ever blocking the core reads, and sized accumulate/trim output instead of a bare number. Every metric, weight, calibration anchor, and gate threshold is exposed as an input, so the entire model is auditable and tunable — nothing is hidden.
█ NOTES & LIMITATIONS
BEDROCK is a long-horizon valuation tool, not a precise top/bottom timer and not a short-term trading system. It is designed to keep you positioned in the statistically favorable portion of the cycle, not to nail exact turns. Several display themes are included. This script is for educational purposes only and is not financial advice — size your own risk and do your own research. Indicator
Basis Divergence OscillatorBasis Divergence Oscillator — PulseWire publication description
## Overview
The Basis Divergence Oscillator turns the **futures-versus-spot basis** (the premium or discount of a future to its cash market) into a standardized, bounded oscillator, and then looks for **divergence between price and that basis**. The idea it tests is simple: when price makes a new extreme but the premium does not confirm it, the move is more likely leverage being unwound than fresh demand.
It is a single-pane oscillator. By default it pairs NSE NIFTY index futures with the NSE:NIFTY cash index, but every data input is user-configurable, so it runs on any future that has a cash/spot counterpart, in any market and on any timeframe.
## What it plots
- A z-scored **basis oscillator** (premium expanding = up, premium shrinking toward discount = down), with a glow line and σ-based overbought/oversold levels.
- **Extreme-zone bands** (default ±3σ) with a gradient fill that deepens toward the edge.
- **Divergence lines and labels** drawn on the oscillator — regular (reversal) and hidden (continuation), in two colors.
- **In-band reversal dots** where the oscillator turns inside an extreme zone.
- Optional **price-pane marks** at the confirmation bar (all generated by this one indicator).
- A **background-adaptive status dashboard** (oscillator value in σ, zone, last divergence, last reversal, live basis in points).
## Why these components are combined (mashup rationale)
This script deliberately combines a **cross-symbol calculation**, a **normalization stage**, a **divergence engine** and a **reversal read**, because each one answers a question the others cannot, and none of them is useful here on its own:
1. **Cross-symbol basis (two instruments → one series).** The basis is `chart price − cash/spot reference`. It isolates the small premium/discount component of price, which is driven by cost of carry, financing and leverage/positioning demand — information that the instrument's own price and its own volume do not contain. This is the whole reason a second symbol is pulled: remove either symbol and the basis is undefined. The two-symbol construction is intrinsic, not decorative.
2. **Standardization (rolling z-score).** The raw basis drifts slowly with time-to-expiry and carry, and its scale differs by instrument. The z-score detrends that drift and expresses the basis in standard-deviation units, so "overbought/oversold" and the extreme bands mean the same thing on NIFTY, on a commodity future, or on a crypto perpetual. Without this step the divergence thresholds would not transfer between symbols.
3. **Divergence engine.** A plotted basis line is already common; the original payload here is reading **price-versus-basis disagreement at confirmed pivots**. The engine pairs each new price pivot with the basis oscillator's value, then requires (a) a genuine new price extreme, (b) the basis failing to confirm it, (c) a minimum oscillator gap scaled to the oscillator's own stdev, (d) the two pivots within a maximum bar distance, and (e) optionally an overbought/oversold reading at the pivot. These gates exist so the combination produces meaningful signals rather than noise.
4. **Reversal read.** Independently, the engine flags oscillator turns that occur inside the extreme bands — a complementary "exhaustion" cue to the divergence cue.
In short, the components form one pipeline: **build an independent signal (basis) → make it comparable (z-score) → surface where price and that signal disagree (divergence) and where it exhausts (reversal).** They are read together; each is incomplete alone.
## How it works (method)
- `basis = price − request.security(reference, close)` on the chart's timeframe (no lookahead).
- `oscillator = z-score(basis, normalization window)`, optionally EMA-smoothed.
- Regular and hidden divergence are detected from confirmed `pivothigh`/`pivotlow` pivots and filtered by the gates above.
- Reversals are oscillator pivots that print within the ±extreme bands.
- Pivots confirm a few bars after they occur, so a printed signal does not repaint afterward. The confirmation lag equals the pivot length.
## How to use it
1. Put the indicator on a **future** (e.g. NIFTY index futures).
2. In **Data source**, set **Reference (cash/spot) symbol** to that instrument's spot (default NSE:NIFTY). A mismatched reference makes the basis meaningless.
3. Read divergence as **context, not a trigger**: a bearish divergence (price higher high, basis lower high) says the advance is not backed by premium; a bullish divergence says the opposite. Confirm with your own structure, levels and risk process.
4. Tune the **pivot length**, **max gap** and **min oscillator gap** to your timeframe; raise them for fewer, cleaner signals.
## Originality
This is an original implementation. It is not a basis line and not a generic divergence script: it is the specific combination of a cross-symbol basis, σ-standardization that makes the read portable across markets, a multi-gate divergence engine (magnitude + distance + extreme-zone), hidden-divergence and in-band reversal detection, and a background-adaptive dashboard. The code is written from scratch; helper functions use only their arguments and built-ins.
## Credits
The basis (futures premium/discount) is explained by the **cost-of-carry / theory-of-storage** framework in futures-pricing economics — foundational work by N. Kaldor (1939) and H. Working (1948–49). **Price/oscillator divergence** is a long-established, publicly documented technical-analysis technique. This script is not affiliated with, nor endorsed by, any third party.
## Notes / limitations
- The basis needs a clean reference feed and a matched contract; on illiquid or mismatched references, or when spot and future trade on different clocks, it is noisy.
- Divergence is descriptive context, never a guarantee of reversal.
- If the reference symbol is unavailable the oscillator holds flat and the dashboard shows "n/a".
## Disclaimer
Research and educational tool only. NOT financial advice and no guarantee of profitability or accuracy. Indicators describe past behaviour; they do not predict the future. Trading carries risk of loss. Test out-of-sample and make your own decisions. The author accepts no liability for any use of this script.
Indicator
IDLP - Intraday Daily Levels Pro [FXSMARTLAB]🔥 IDLP – Intraday Daily Levels Pro
IDLP – Intraday Daily Levels Pro is a precision toolkit for intraday traders who rely on objective daily structure instead of repainting indicators and noisy signals.
Every level plotted by IDLP is derived from one simple rule:
Today’s trading decisions must be based on completed market data only.
That means:
✅ No use of the current day’s unfinished data for levels
✅ No lookahead
✅ No hidden repaint behavior
IDLP reconstructs the previous trading day from the intraday chart and then projects that structure forward onto the current session, giving you a stable, institutional-style intraday map.
🧱 1. Previous Daily Levels (Core Structure)
IDLP extracts and displays the full previous daily structure, which you can toggle on/off individually via the inputs:
Previous Daily High (PDH)
Previous Daily Low (PDL)
Previous Daily Open
Previous Daily Close,
Previous Daily Mid (50% of the range)
Previous Daily Q1 (25% of the range)
Previous Daily Q3 (75% of the range)
All of these come from the day that just closed and are then locked for the entire current session.
What these levels tell you:
PDH / PDL – true extremes of yesterday’s price action (liquidity zones, breakout/reversal points).
Previous Daily Open / Close – how the market positioned itself between session start and end
Mid (50%) – equilibrium level of the previous day’s auction.
Q1 / Q3 (25% / 75%) internal structure of the previous day’s range, dividing it into four equal zones and helping you see if price is trading in the lower, middle, or upper quarter of yesterday’s range.
All these levels are non-repaint: once the day is completed, they are fixed and never change when you scroll, replay, or backtest.
🎯 2. Previous Day Pivot System (P, S1, S2, R1, R2)
IDLP includes a classic floor-trader pivot grid, but critically:
It is calculated only from the previous day’s high, low, and close.
So for the current session, the following are fixed:
Pivot P – central reference level of the previous day.
Support 1 (S1) and Support 2 (S2)
Resistance 1 (R1) and Resistance 2 (R2)
These levels are widely used by institutional desks and algos to structure:
mean-reversion plays, breakout zones, intraday targets, and risk placement.
Everything in this section is non-repaint because it only uses the previous day’s fully closed OHLC.
📏 3. 1-Day ADR Bands Around Previous Daily Open
Instead of a multi-day ADR, IDLP uses a pure 1-Day ADR logic:
ADR = Range of the previous day
ADR = PDH − PDL
From that, IDLP builds two clean bands centered around the previous daily Open:
ADR Upper Band = Previous Day Open + (ADR × Multiplier)
ADR Lower Band = Previous Day Open − (ADR × Multiplier)
The multiplier is user-controlled in the inputs:
ADR Multiplier (default: 0.8)
This lets you choose how “tight” or “wide” you want the ADR envelope to be around the previous day’s open.
Typical use cases:
Identify realistic intraday extension targets, Spot exhaustion moves beyond ADR bands, Frame reversals after reaching volatility extremes, Align trades with or against volatility expansion
Again, since ADR is calculated only from the completed previous day, these bands are totally non-repaint during the current session.
🔒 4. True Non-Repaint Architecture
The internal logic of IDLP is built to guarantee non-repaint behavior:
It reconstructs each day using time("D") and tracks:
dayOpen, dayHigh, dayLow, dayClose for the current day
prevDayOpen, prevDayHigh, prevDayLow, prevDayClose for the previous day
At the moment a new day starts:
The “current day” gets “frozen” into prevDay*
These prevDay* values then drive: Previous Daily Levels, Pivots, ADR.
During the current day:
All these “previous day” values stay fixed, no matter what happens.
They do not move in real time, they do not shift in replay.
This means:
What you see in the past is exactly what you would have seen live.
No fake backtests.
No illusion of perfection from repainting behavior.
🎯 5. Designed For Intraday Traders
IDLP – Intraday Daily Levels Pro is made for:
- Day traders and scalpers
- Index and FX traders
- Prop firm challenge trading
- Traders using ICT/SMC-style levels, liquidity, and range logic
- Anyone who wants a clean, institutional-style daily framework without noise
You get:
Previous Day OHLC
Mid / Q1 / Q3 of the previous range
Previous-Day Pivots (P, S1, S2, R1, R2)
1-Day ADR Bands around Previous Day Open
All calculated only from closed data, updated once per day, and then locked. Indicator
BINANCE-BYBIT Cross Chart: Spot-Perpetual CorrelationName: "Binance-Bybit Cross Chart: Spot-Perpetual Correlation"
Category: Scalping, Trend Analysis
Timeframe: 1M, 5M, 30M, 1D (depending on the specific technique)
Technical analysis: This indicator facilitates a comparison between the price movements shown on the Binance spot chart and the Bybit perpetual chart, with the aim of discerning the correlation between the two charts and identifying the dominant market trends. It automatically generates the corresponding chart based on the ticker selected in the primary chart. When a Binance pair is selected in the main chart, the indicator replicates the Bybit perpetual chart for the same pair and timeframe, and vice versa, selecting the Bybit perpetual chart as the primary chart generates the Binance spot chart.
Suggested use: You can utilize this tool to conduct altcoin trading on Binance or Bybit, facilitating the comparison of price actions and real-time monitoring of trigger point sensitivity across both exchanges. We recommend prioritizing the Binance Spot chart in the main panel due to its typically longer historical data availability compared to Bybit.
The primary objective is to efficiently and automatically manage the following three aspects:
- Data history analysis for higher timeframes, leveraging the extensive historical data of the Binance spot market. Variations in indicators such as slow moving averages may arise due to differences in historical data between exchanges.
- Assessment of coin liquidity on both exchanges by observing candlestick consistency on smaller timeframes or the absence of gaps. In the crypto market, clean charts devoid of gaps indicate dominance and offer enhanced reliability.
- Identification of precise trigger point levels, including daily, previous day, or previous week highs and lows, which serve as sensitive areas for breakout or reversal operations.
All-Time High (ATH) and All-Time Low (ATL) levels may vary significantly across exchanges due to disparities in historical data series.
This tool empowers traders to make informed decisions by leveraging historical data, liquidity insights, and precise trigger point identification across Binance Spot and Bybit Perpetual market.
Configuration:
EMA length:
- EMA 1: Default 5, user configurable
- EMA 2: Default 10, user configurable
- EMA 3: Default 60, user configurable
- EMA 4: Default 223, user configurable
- Additional Average: Optional display of an additional average, such as a 20-period average.
Chart Elements:
- Session separator: Indicates the beginning of the current session (in blue)
- Background: Indicates an uptrend (60 > 223) with a green background and a downtrend (60 < 223) with a red background.
Instruments:
- EMA Daily: Shows daily averages on an intraday timeframe.
- EMA levels 1h - 30m: Shows the levels of the 1g-30m EMAs.
- EMA Levels Highest TF: Provides the option to select additional EMA levels from the major timeframes, customizable via the drop-down menu.
- "Hammer Detector: Marks hammers with a green triangle and inverted hammers with a red triangle on the chart
- "Azzeramento" signal on TF > 30m: Indicates a small candlestick on the EMA after a dump.
- "No Fomo" signal on TF < 30m: Indicates a hyperextended movement.
Trigger Points:
- Today's highs and lows: Shows the opening price of the day's candlestick, along with the day's highs and lows (high in purple, low in red, open in green).
- Yesterday's highs and lows: Displays the opening price of the daily candlestick, along with the previous day's highs and lows (high in yellow, low in red).
You can customize the colors in "Settings" > "Style".
It is best used with the Scalping The Bull indicator on the main panel.
Credits:
@tumiza999: for tests and suggestions.
Thanks for your attention, happy to support the PulseWire community.
Indicator
Trade Warehouse (SPOT trades)Hello there!
Let's imagine You are trading SPOT, buy more and more every new dump, but bear market is not going to stop... and your first trade was 3 YEARS AGO!!!
Can't believe it is true.
The problem is - exchanges allow You to see only new trades last 6 months(Binance). But I want to see all of them! How do I know AVG Price?
This script is my solution. Just use it to track and store your trade, so You can see AVG without uploading old trades everytime and using calculator.
Script description:
Here You can see the "Trade" type of variable. Python script using Pandas converts trades from .csv file into string type that You can input as trade(price, pair, amount, date..). After it uppends to the trades_array and pushed into the loop.
If trade date is more than current cundle - it pushes new trade to other arrays such a "pair", "avg_tot" etc. to comput it later.
If trade was buy - it increase invested capital and owned amount, opposite for sell and recomputs AVG price.
Since script has at least 1 trade it starts to plot AVG price.
There are 2 AVG price:
1. For total invested counting(You can get negative value if traded successful)
2. Current AVG price since last 0 currency amount(there is dust value to set how many usd we take as dust)
Table represents all assets statistics
Just upload your trades only 1 time, use script to convert it into pine code, and use as indicator. This script allow You to see ALL trades from oldest to the newest.
github.com/Arivadis/...w_Tradings_warehouse
If this script helped You - press Star (on GitHub) Like (on PulseWire)
Warning -
Does not include free/earn/withdraw/deposit counting. Only Buy and Sell =>
This script has no idea about your side currency deposits, so if You got Your BTC or EUR or .. from another wallet and sold later - it can break your statistical data. Add this transfer manually(see examples inside script).
Use my github manual to get this script workin.
Installing takes around 3 minutes and contains 3-5 steps Indicator
Annualized Spot-Future DifferenceThe "Annualized Spot-Future Difference" indicator (ASFD) compares the closing prices of a futures contract and its underlying spot asset. It calculates the price difference between the two instruments and annualizes this difference to provide a standardized measure for comparison.
The indicator takes inputs for the futures ticker symbol and the spot ticker symbol, allowing flexibility in selecting the specific assets for analysis. Additionally, it allows the user to input the contract date, which represents the expiration date of the futures contract.
The ASFD indicator plots the annualized difference between the futures and spot prices. It calculates the price difference by subtracting the spot price from the futures price. To annualize this difference, it considers the remaining days to the contract expiration and scales the difference accordingly.
The annualized difference can provide insights into market expectations, as it reflects the market's perception of the future price movement of the underlying asset. A positive value indicates that the futures price is higher than the spot price, potentially suggesting bullish sentiment. Conversely, a negative value suggests bearish sentiment, with the futures price lower than the spot price.
Traders and analysts can utilize the ASFD indicator to identify potential opportunities for arbitrage or evaluate market sentiment regarding the underlying asset. By monitoring changes in the annualized difference over time, they can gain insights into market dynamics and make informed trading decisions.
It's important to note that the ASFD indicator relies on accurate and up-to-date pricing data for both the futures and spot assets. Traders should verify that the selected ticker symbols correspond to the desired instruments and ensure that the contract date aligns with the relevant futures contract expiration.
Overall, the ASFD indicator provides a quantitative measure of the annualized price difference between futures and spot assets, enabling traders and analysts to assess market expectations and identify potential trading opportunities. Indicator
Indicator
Indicator
Indicator
VIPThis indicator is using the modified "SSS".
This strategy uses combined indicators to create LONG entry points, the strategy was first found by saudALThaidy.
How to use: Open your asset and pick a timeframe between 5min and 2hours (recommended: 30min, 45min), the strategy will give entry points itself, you can monitor and take profit manually(recommended), or you can use the exit setup.
exit setup:
Take Profit : close the trade and take profit after the specified percentage from the entry point gets hit.
Use Stop Percentage : if false, trade will be closed if it gets below MA line, if true it will use the next set up.
StopLose Percentage : specify a percentage to close the trade if the asset price goes below it.
Important Notes:
As saudALThaidy states that the strategy must be used with -heiken ashi- candles for the best result.
for best use of the strategy, use (Take Profit = 1,Use Stop Percentage=false) to get every trade, and take profit manually when ever you see the best.
For any notes on the strategy to be edited, or for another strategies ideas please comment. Strategy
Indicator
Indicator
Bitfinex Spot PremiumOverview
A tool to display the spot price premium of Bitfinex coins vs the other big 3 exchanges.
Premium is calculated against:
- Coinbase
- Binance
- FTX
The average is calculated through volume weighting. The absolute difference between the Bitfinex spot price and the calculated average is then displayed on the histogram.
Interacting with the tool
Colours: Green bars indicate a positive premium (Bitfinex spot price is greater than the average), Red bars indicate a negative premium. The ability to grey out smaller premiums is also enabled with the "Grey Small Vals" checkbox, this can be used to further emphasise larger premiums.
Ticker: The ticker input allows you to detect the Bitfinex premium for any coin traded within all 4 exchanges (Bitfinex, Coinbase, Binance, FTX). Just input the coins ticker symbol, for example, "BTC", "ETH", "UNI".
Indicator Ideology
Bitfinex is known for being the home of crypto "smart money". Therefore, positive premiums indicate stronger buying from "smart money". Although this premium is a good sign of bullish/ bearish market conditions, for example, consecutive days of a negative Bitfinex premium have been pretty good at indicating short term tops in BTC, this indicator should only be used as a confirmation signal.
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Strategy
Indicator
