EVA Ai+ Chart Patterns Indicator - Price Action & Trading Signal🧬 EVA Ai+ — индикатор графических фигур и торговых паттернов
EVA Ai+ Chart Patterns автоматически находит графические фигуры технического анализа прямо на графике PulseWire.
Индикатор отслеживает локальные и крупные ценовые модели, строит их границы, определяет направление возможного пробоя и показывает понятные метки ЛОНГ или ШОРТ после подтверждения сигнала.
Подходит для анализа криптовалют, Bitcoin, Forex, акций, фьючерсов и фондовых индексов. Работает на текущем таймфрейме графика: от скальпинга и внутридневной торговли до более крупных свинговых моделей.
🔍 Какие фигуры распознаёт индикатор
📈 Фигуры продолжения движения
🟢 Бычий флаг — ЛОНГ
🔴 Медвежий флаг — ШОРТ
🔵 Бычий вымпел — ЛОНГ
🟠 Медвежий вымпел — ШОРТ
Алгоритм анализирует импульсное древко, ширину консолидации, наклон границ, сжатие диапазона и качество пробоя.
🔄 Разворотные фигуры
🟢 Двойное дно — ЛОНГ
🔴 Двойная вершина — ШОРТ
🟣 Голова и плечи — ШОРТ
🔵 Перевёрнутые голова и плечи — ЛОНГ
Двойные вершины и основания отображаются толстой пунктирной линией. Голова и плечи — толстой точечной линией. Благодаря этому разные модели легко различить даже на насыщенном графике.
🧠 Поиск локальных и крупных фигур
Обычный короткий паттерн и большая рыночная конструкция рассчитываются отдельно.
Индикатор умеет находить:
локальные фигуры внутри текущего движения;
крупные разворотные модели;
длинные флаги и вымпелы;
фигуры с промежуточными ценовыми колебаниями;
наиболее качественную комбинацию опорных экстремумов.
Мелкий рыночный шум не должен автоматически разрушать крупную модель. Для этого EVA сравнивает несколько допустимых комбинаций и выбирает структуру с более высоким качеством.
📊 Оценка качества фигуры
Каждая найденная модель получает оценку:
КАЧ. 76%
При расчёте учитываются геометрия, масштаб, симметрия, направление движения перед фигурой, качество экстремумов и пробой сигнальной границы.
На графике можно увидеть:
ФЛАГ
ЛОНГ · КАЧ. 78%
ГОЛОВА И ПЛЕЧИ
ШОРТ · КАЧ. 84%
КРУПНАЯ · 68 баров
Низкокачественные совпадения фильтруются. Порог для формирующихся и подтверждённых моделей настраивается отдельно.
⏳ Формирующаяся и подтверждённая фигура
Пока модель развивается, её линии могут обновляться вместе с новыми свечами. Такая фигура отмечается как:
ФОРМИРУЕТСЯ
Подтверждённый сигнал появляется после закрытия свечи за границей фигуры или линией neckline.
Закрытая свеча
+ подтверждённый пробой
+ достаточное качество
= ЛОНГ или ШОРТ
Подтверждённая метка не переносится на прошлые свечи. Сигнал фиксируется на том баре, где условия действительно были выполнены.
🎨 Отдельный цвет для каждого паттерна
У каждой группы свой цвет:
флаг ЛОНГ — изумрудный;
флаг ШОРТ — красно-коралловый;
вымпел ЛОНГ — голубой;
вымпел ШОРТ — оранжевый;
двойное дно — лаймовый;
двойная вершина — малиновый;
голова и плечи — фиолетовый;
перевёрнутые голова и плечи — синий.
Цвета и прозрачность формирующихся фигур доступны в настройках.
🔔 Торговые оповещения PulseWire
Для каждого подтверждённого паттерна предусмотрен отдельный алерт:
ЛОНГ Флаг
ШОРТ Флаг
ЛОНГ Вымпел
ШОРТ Вымпел
ЛОНГ Двойное дно
ШОРТ Двойная вершина
ШОРТ Голова и плечи
ЛОНГ Перевёрнутые голова и плечи
Оповещения можно подключить через стандартное меню PulseWire и получать уведомления при появлении подтверждённой фигуры.
📌 Как применять индикатор
Определите общий контекст рынка: тренд, диапазон или разворотная зона.
Посмотрите, какая фигура формируется на графике.
Проверьте направление: ЛОНГ или ШОРТ.
Обратите внимание на показатель КАЧ.
Дождитесь подтверждённого закрытия свечи за границей модели.
Сопоставьте сигнал с уровнями поддержки и сопротивления, объёмом и собственной системой управления риском.
Формирующаяся фигура показывает возможный сценарий. Подтверждённая метка сообщает, что условия пробоя уже выполнены.
🎯 Для каких задач подходит
Индикатор можно использовать для:
технического анализа;
поиска графических фигур;
Price Action;
анализа тренда и разворота;
поиска пробоя консолидации;
криптовалютной торговли;
торговли Bitcoin;
Forex;
акций и фьючерсов;
скальпинга;
дневной и свинг-торговли;
поиска сигналов ЛОНГ и ШОРТ.
⚠️ Уведомление о рисках
Графическая фигура не гарантирует продолжение или разворот цены. Используйте сигналы вместе с рыночным контекстом, уровнями, объёмом и заранее определённым риском.
Индикатор является аналитическим инструментом и не представляет собой индивидуальную инвестиционную рекомендацию.
🇬🇧 English Title
🧬 EVA Ai+ Chart Patterns Indicator — Price Action & Trading Signals
Search-focused publication title:
EVA Ai+ Flags, Pennants, Double Top & Head and Shoulders Indicator
🇬🇧 English Description
🧬 EVA Ai+ Chart Patterns and Trading Signals Indicator
EVA Ai+ Chart Patterns automatically detects technical analysis patterns directly on the PulseWire chart.
The indicator scans both local and large-scale price structures, draws their boundaries, evaluates pattern quality, and displays clear LONG or SHORT signals after confirmation.
It can be used for crypto, Bitcoin, forex, stocks, futures, and index trading. The detector works on the current chart timeframe and supports scalping, day trading, and swing-trading analysis.
🔍 Patterns detected
📈 Continuation patterns
🟢 Bull Flag — LONG
🔴 Bear Flag — SHORT
🔵 Bull Pennant — LONG
🟠 Bear Pennant — SHORT
The detector evaluates the impulse pole, consolidation range, boundary slopes, price compression, and breakout quality.
🔄 Reversal patterns
🟢 Double Bottom — LONG
🔴 Double Top — SHORT
🟣 Head and Shoulders — SHORT
🔵 Inverse Head and Shoulders — LONG
Double Top and Double Bottom structures are drawn with thick dashed lines. Head and Shoulders patterns use thick dotted lines, making each pattern family easy to recognize on the chart.
🧠 Local and macro pattern detection
Short price structures and large reversal formations are processed separately.
The indicator can detect:
local chart patterns;
large reversal structures;
extended flags and pennants;
patterns containing intermediate price swings;
the strongest valid combination of pivot points.
A minor internal swing does not automatically invalidate a larger pattern. EVA compares several possible pivot combinations and selects the structure with the stronger geometry and quality score.
📊 Pattern quality score
Each detected formation receives a quality rating:
QUALITY 76%
The score considers pattern geometry, scale, time symmetry, prior market direction, pivot structure, and breakout confirmation.
Example chart labels:
FLAG
LONG · QUALITY 78%
HEAD AND SHOULDERS
SHORT · QUALITY 84%
MACRO · 68 bars
Low-quality matches are filtered. Separate thresholds are available for developing and confirmed patterns.
⏳ Developing and confirmed patterns
While a pattern is still developing, its boundaries may update as new candles appear. The chart label shows:
FORMING
A confirmed signal is created only after a candle closes beyond the pattern boundary or neckline.
Closed candle
+ confirmed breakout
+ sufficient quality
= LONG or SHORT
Confirmed signals are placed on the bar where the conditions are actually completed. They are not moved backward to earlier historical candles.
🎨 Individual pattern colors
Each pattern family uses a separate color:
Bull Flag — emerald;
Bear Flag — coral red;
Bull Pennant — cyan;
Bear Pennant — orange;
Double Bottom — lime;
Double Top — magenta;
Head and Shoulders — purple;
Inverse Head and Shoulders — blue.
Pattern colors and developing-pattern transparency can be adjusted in the indicator settings.
🔔 PulseWire alerts
Separate alert conditions are included for:
LONG Flag
SHORT Flag
LONG Pennant
SHORT Pennant
LONG Double Bottom
SHORT Double Top
SHORT Head and Shoulders
LONG Inverse Head and Shoulders
Alerts can be configured through the standard PulseWire alert menu.
📌 How to use the indicator
Identify the broader market context: trend, range, or reversal area.
Check which chart pattern is developing.
Review the expected direction: LONG or SHORT.
Look at the pattern quality score.
Wait for a confirmed candle close beyond the boundary.
Combine the signal with support and resistance, volume, and your risk-management rules.
A developing pattern represents an active scenario. A confirmed label means that the breakout conditions have already been completed.
🎯 Common use cases
EVA Ai+ Chart Patterns can be used for:
technical analysis;
chart pattern detection;
Price Action trading;
trend and reversal analysis;
breakout trading;
crypto trading;
Bitcoin trading;
forex trading;
stock and futures analysis;
scalping;
day trading;
swing trading;
LONG and SHORT trading signals.
⚠️ Risk notice
A chart pattern does not guarantee a reversal, continuation, or profitable trade. Signals should be evaluated together with market context, volume, key price levels, and predefined risk management.
This indicator is an analytical tool and does not provide individual financial or investment advice. Indicator
Apex Edge - Trend BreakoutApex Edge — Trend Breakout
A with-trend channel breakout system with a 30-symbol radar and a dual-window, cost
adjusted backtest.
Indicator Guide - Apex Edge
This guide explains exactly what the indicator does, how every number is calculated, why the backtest is built the way it is, and how to trade it. Nothing here is hidden behind a black box — the whole point of the tool is that you can see the workings and judge the edge for yourself.
1. What it is
Apex Edge — Trend Breakout is a single overlay indicator that does four jobs at once:
Signals trades when price breaks the recent range in the direction of the dominant trend.
Manages the trade with a chandelier trailing stop, so winners are allowed to run and losers are cut quickly.
Scans a 30-symbol watchlist (the Radar), ranking what is trending and flagging what is about to break.
Tests the rules on the chart symbol across two separate date windows and reports the result as average R and sample size — then auto-grades it Red, Amber or Green.
The thesis.
Most price action is noise. Occasionally a market trends, and when it does, a break of the
recent range tends to continue. The edge of such a system does not come from being right often — it comes from a fat right tail: many small losses when breaks fail, paid for by the occasional large runner that the trailing stop rides for multiples of the initial risk. The tool is built end-to-end to find that behaviour and to stop you fooling yourself about whether it is really there.
2. What appears on your chart
Green and red rails — the upper and lower edges of the breakout channel. A close beyond a
rail is a potential trigger.
Up / down triangles — confirmed entries (a close-break that agrees with the trend).
Orange line — the live trailing stop for the most recent signal. This is where your protective
order goes.
HUD (top-right by default) — the chart symbol's trend, distance to its rail, current setup state, last signal and a running long/short signal count.
Radar — the 30-symbol scanner with score, direction, state and a Red/Amber/Green
“Go” column.
Backtest panel — two date windows side by side, each showing average R and
trade count per side, plus an automatic verdict.
3. The entry signal — how it is calculated
3.1 The breakout channel
The rails are the highest high and lowest low of the last N bars (default 20), measured up to the
previous bar so they never repaint:
upBreak = highest(high, 20) of the prior bar
dnBreak = lowest(low, 20) of the prior bar
A long trigger is a close crossing above the upper rail; a short trigger is a close crossing below the lower rail. Because the test is on the close, an intrabar wick through a rail that closes back inside does not trigger — only a genuine close beyond the range counts.
3.2 The dominant-trend filter
A breakout alone is not enough; it must agree with the trend. Trend is defined by a long EMA (default 200) and that EMA's slope, so a flat market counts as no trend:
Uptrend = close > EMA(200) AND EMA(200) rising over the last 5 bars
Downtrend = close < EMA(200) AND EMA(200) falling over the last 5 bars
Requiring both price position and EMA slope filters out the chop that ruins most breakout systems: if the EMA is flat, neither condition is true and no trades are taken.
3.3 Optional higher-timeframe agreement
You can additionally require the higher timeframe (default daily) to agree, using its last closed bar's EMA so it cannot repaint. With it on, a 4H long also needs the daily to be pointing up. Off by default.
3.4 The final rule
Long = close-break of the upper rail AND dominant uptrend
Short = close-break of the lower rail AND dominant downtrend
With “with-trend only” enabled (the default), counter-trend and flat-market breaks are blocked entirely. The triangle only prints when both halves line up.
4. The exit — chandelier trailing stop, and what “R” means
Risk is defined the moment you enter. The initial stop sits a multiple of Average True Range away from entry (default 1.5 × ATR(14)). That distance — entry to initial stop — is one R. Every outcome the tool reports is measured in multiples of that initial risk.
Once in the trade, the stop trails using a chandelier: it hangs a multiple of ATR (default 3 × ATR)
below the highest high reached since entry (mirrored for shorts). It only ever moves in your favour — it ratchets, never loosens. You exit when price touches the line.
A loss is roughly −1R: the break fails and price falls back to the initial stop.
A win is whatever the trail captures — often small, occasionally very large when a real trend
develops. There is no fixed profit target; capping the winners would throw away the exact tail
the system exists to harvest.
Note Live, you place a resting stop on the orange line and step it along as the line moves. The
backtest exits on the same intrabar touch, so what you test is what you trade.
5. The Market Radar — how the scan is built
The Radar pulls 30 symbols on the scan timeframe (default 4H) and ranks them so you watch the right markets. Four numbers drive it.
5.1 Trend-strength score
The score blends how cleanly a market is moving with how strongly:
Efficiency Ratio (ER) — net distance travelled divided by the total path taken, over a lookback
(default 20). A straight move scores high; a market that thrashes back and forth to end up in the same place scores low.
ER = |close − close | / sum of |bar-to-bar moves over 20 (as a %)
ADX — the standard directional-strength index (default 14).
The two are scaled and blended 55% ER / 45% ADX, calibrated so a market in a genuine trend reads roughly 60–70. Only symbols above the score threshold (default 50) are shown, strongest first.
5.2 Direction, NEAR and the Go grade
Direction comes from the same dominant-EMA logic as the chart (up, down, or flat).
NEAR flags a symbol that is trending and within a set distance of its breakout rail in the trend
direction (default 0.5 × ATR) — i.e. about to trigger.
Go (Red / Amber / Green) is read from your own curated lists. You tell the indicator which
symbols you trade long and short at Green (confirmed) and Amber (testing) confidence; the Go
column then lights up only for those symbols in that direction.
Note The Radar does not grade edges for you — you populate the Green/Amber lists from your own backtest sweep (Section 6). The Go column simply surfaces your decisions on the live scan.
6. The backtest engine and the Auto verdict
This is where you decide whether a symbol earns a place on your lists. For the chart symbol, the engine replays every historical signal forward (up to 60 bars), simulates the exact chandelier trail with intrabar touch exits, deducts your cost per trade, and records each result in R.
It does this across two independent date windows and reports, for each window and each side
(long / short / all):
Avg R — the average result per trade, net of cost. This is the system's expectancy.
N — the number of trades in that window. This tells you whether to believe the Avg R.
The Auto column then turns that into a verdict using two thresholds (defaults shown), applied to both windows:
Verdict/Condition:
GREEN
Avg R ≥ 0.10 AND N ≥ 50 in BOTH windows — a real, repeatable edge
AMBER
Qualifies in one window, or only marginally — promising, not proven
no
Fails the bar — no demonstrated edge this way
A Green therefore is not a single good run; it is an edge that survived two separate market periods with a large enough sample in each. That is the bar a symbol must clear before it goes on your Green list.
Note - Cost is entered in price units and applies to the chart symbol, so set it to that instrument's realistic round-trip spread before trusting a marginal (Amber) result. A couple of pips is what flips a thin edge from positive to negative — which is exactly the truth you want before risking money.
7. Why those default backtest dates?
The two windows default to 2019–2021 and 2022–present, and the split is deliberate. These are not two halves of one stretch — they are two genuinely different market regimes:
2019–2021 spans the late-cycle calm, the COVID crash and the violent recovery — a high
volatility, strong-trend era.
2022–present is the rate-hiking regime: broad USD strength, a real equity bear in 2022, and a
different volatility character.
A set of rules that prints a profit in one regime might simply be tuned, by luck or by hand, to that regime. The only honest test is whether the same untouched rules also work in a different one.
Requiring an edge to clear the bar in both windows is the out-of-sample check built directly into the panel. The dates are adjustable — what matters is that the two windows cover different conditions, not the exact years.
8. Why we judge by R and N, not win rate
Win rate is the most quoted and least useful statistic in trading. On its own it tells you almost nothing, and for a system like this it actively misleads.
8.1 Win rate hides the size of wins and losses
Two systems can have wildly different win rates and the opposite profitability. Expectancy — average R per trade — is what actually ties to your account:
Example:
System - “High win rate” (avg win +0.5R, avg loss −5R)
Win rate - 90%
Expectancy -0.05R
Reality - Loses money
System - Trend breakout (avg win +3R, avg loss −1R)
Win rate - 40%
Expectancy - 0.60R
Reality - Strong edge
The 90%-winner loses on the rare 5R disaster; the 40%-winner thrives because its winners dwarf its losers. Judge either by win rate and you draw the wrong conclusion. Expectancy = (win% × avg win) − (loss% × avg loss), expressed in R, is the number that matters.
8.2 This system is meant to be a low win-rate system
A trend-breakout-with-trail design is designed to win less than half the time. Most breakouts fail and cost ~1R; a minority become trends and the trail rides them for many R. The profit lives entirely in those few big winners — the fat right tail. Win rate cannot see that tail; only average R can.
Optimising for win rate would push you to cap winners and widen stops, destroying the very edge this tool is built to capture.
8.3 N is what makes the average believable
An average R is only as trustworthy as the number of trades behind it. A +0.8R average on 8 trades is a coin landing heads a few times in a row — it tells you nothing. The same average on 120 trades is a genuine signal. That is why the Auto grade refuses to certify anything below N ≥ 50 per window, no matter how attractive the Avg R looks. Small samples are where traders fool themselves most, so the tool simply will not show Green there.
8.4 How to read an Avg R figure
Avg R (net of cost) Read it as
≤ 0 No edge
+0.05 to +0.10 Marginal — cost and slippage can erase it
+0.10 to +0.20 Workable edge
+0.20 to +0.40 Strong
+0.40 and up Suspect — check for look-ahead, tiny N, or an error
Bigger is not automatically better. A sustained average above ~+0.40R on a simple system is more often a sign of a mistake than a goldmine, and should be interrogated, not celebrated.
9. How to trade it
The workflow separates the slow, careful job (deciding what to trade) from the fast one (executing when it triggers).
1. Weekly — curate. Flick through your watchlist. On each symbol read the Auto panel and note
the verdict per side. Add Green symbols to the matching Green list (long or short) in settings,
and Amber symbols to the Amber lists. Skip the reds.
2. Set once — the blanket alert. On a 4H chart create the “Watchlist near breakout” alert, set to Once Per Bar Close. It pings only for your Green/Amber symbols when one is trending and
nearing its rail.
3. On the ping — find the trade. Open the Radar. Confirm the symbol shows Green/Amber Go +
NEAR + the right direction.
4. Arm the entry. On that symbol's chart set the “Breakout Long/Short” alert, also Once Per Bar
Close, so only a close beyond the rail can fire it (no wicks).
5. Enter. When the triangle prints, take the trade and place your stop on the orange trailing line.
6. Manage. Step the stop along with the line as it moves your way — never against you. Exit on the touch. No fixed target; let the trail decide.
10. Trading rules and risk discipline
Trade Green in the validated direction. Amber is watch-and-small-size. Red is no trade.
A break against the trend is not your trade. Skip it, however tempting.
Judge over a batch of trades, never one. A single loss says nothing about a positive
expectancy system; variance is the cost of admission.
One settings set for all symbols. Never tune the inputs per symbol to flatter the past — that is
curve-fitting. If you change a strategy setting, re-test both date windows before trusting it again.
Size correlated instruments as one position. A basket of yen crosses, or a basket of equity
indices, is one bet wearing several names. Three 1% longs that all rise and fall together is a 3%
bet on one theme, not three diversified trades.
11. Settings reference
Setting Default What it does
Breakout channel 20 Bars used for the high/low rails
Near-break heads-up 0.5 ATR How close to the rail counts as NEAR
Dominant EMA 200 The trend reference line
EMA slope lookback 5 Bars used to judge the EMA's slope
With-trend only On Blocks counter-trend and flat-market breaks
Higher timeframe Off / 1D Optionally require the daily to agree
Initial stop 1.5 ATR Defines one R (entry to stop)
Chandelier trail 3.0 ATR Trailing distance below the running extreme
Trade window 60 bars How far the backtest follows each signal
Cost per trade 0 Round-trip cost in price units (set per instrument)
Test windows A / B 2019–21 / 22–now The two regimes the Auto grade checks
Qualify Avg R / N 0.10 / 50 Thresholds for a Green verdict, per window
Scan timeframe 4H Timeframe the Radar evaluates
Score threshold 50 Minimum trend score to appear on the Radar
12. Non-repainting, and honest limitations
Non-repainting by design. Signals use closed-bar prices and the prior-bar channel, the higher
timeframe pull uses the last closed bar, and the backtest only ever replays bars that were already in the past relative to each signal. What you see on history is what you would have seen live.
What a backtest can and cannot tell you. The replay is a simulation. It assumes fills at the touched price and a fixed cost; live trading adds variable spread, slippage, gaps and partial fills. Treat the Avg R as an estimate of edge and direction, not a promise of returns. Forward-test before you scale.
The Green/Amber lists are your own settings inputs — the tool surfaces your decisions, it does not validate them for you.
Correlated symbols inflate the apparent number of edges; the count is not the same as
diversification.
A strong directional drift in an asset class (equities up, for example) can make a one-sided
system look better than the rule itself is.
This indicator is a decision-support and research tool. It is not financial advice and does not place trades. Markets carry risk; past performance does not guarantee future results. You are responsible for your own decisions and risk.
Apex Edge — Trend Breakout Radar finds the trend Auto/Go says if it pays Arrow times entry Orange line manages Exit Indicator
Quantum Scanner Equalizer [Point algo]The Quantum State Scanner is an advanced quantitative dashboard designed to provide a comprehensive "Health Check" of any financial instrument. Instead of relying on a single timeframe or a single mathematical model, the Quantum Scanner aggregates data across 12 distinct lookback periods (based on the Fibonacci sequence) to calculate the market's true state.
By normalizing complex data into a simplified 0-100 Equalizer HUD, traders can instantly identify whether a move is backed by broad-spectrum consensus or is simply a low-conviction anomaly.
The 5 Pillars of Quantum Analysis
The scanner calculates five core "Quantum Pillars" before aggregating them into a final Master Score:
1. Trend (TRND): Analyzes the relationship between Price, VWMA, and EMA across 12 periods. Considers whether price is structurally bullish or bearish.
2. Momentum (MOM): Uses a Stoch-RSI derivation to measure the speed of price movement and identify overbought/oversold exhaustion zones.
3. Volatility (VOLA): Employs a Bollinger/Keltner Squeeze engine. Higher scores indicate expanding volatility (expansion), while lower scores indicate a squeeze (contraction).
4. Volume Delta (VOLU): Measures the internal force of the market by calculating Buy vs. Sell volume pressure.
5. Structure (STRC): A price-action engine that scans for liquidity sweeps (High/Low breaks) and candle rejections to determine structural strength.
How to Read the Scanner
0-40 (Red Zone): Strong Bearish Consensus.
40-60 (Yellow Zone): Neutral / Indecision / Consolidation.
60-100 (Green Zone): Strong Bullish Consensus.
High Conviction Signals: When the Master Score exceeds 80 or drops below 20, the background of the chart will dynamically highlight, signaling a potential "Power Move" or trend ignition.
Key Features
1. Dynamic HUD: A sleek, minimalist "Equalizer" UI positioned to the right of your price action.
2. Aggregated Logic: Processes data from lookback periods 5 through 987 simultaneously.
3. Right-Offset Control: Easily move the dashboard to prevent it from overlapping with your candles.
Disclaimer:
Educational Purpose Only: This indicator ("The Script") is provided for educational and informational purposes only. It does not constitute financial, investment, tax, or legal advice.
No Guarantee of Results: Past performance, whether actual or simulated by backtesting, is not indicative of future results. The mathematical models used (including GARCH, Ito’s Lemma, and Volume-Weighted calculations) are theoretical and do not account for market slippage, liquidity gaps, or "black swan" events.
Assumption of Risk: Trading involves a substantial risk of loss and is not suitable for every investor. You are solely responsible for your own trading decisions. Pointalgo and its creators shall not be held liable for any financial losses or damages resulting from the use of this script. Indicator
AG Pro Reversal Pattern Quality Scanner [AGPro Series]AG Pro Reversal Pattern Quality Scanner
Overview / What it does
AG Pro Reversal Pattern Quality Scanner is an overlay tool designed to detect and visualize selected classical reversal structures directly on the chart while adding a structured quality layer to each valid setup. The script focuses on four widely recognized reversal formations: Double Top, Double Bottom, Head & Shoulders, and Inverse Head & Shoulders.
Instead of marking every possible structural resemblance, the script applies a filtered detection workflow based on pivot structure, pattern width, peak or trough equality, pullback depth, neckline logic, and an internal quality model. The goal is not simply to identify a shape, but to highlight formations that display more balanced structure and more usable context.
Each detected pattern can be displayed with a pattern box, a projected neckline, and a quality label that summarizes the pattern type, directional bias, quality score, and grade. This makes the script suitable for traders who want a structured visual map of potential reversal zones rather than a raw pattern-highlighting tool with no ranking logic.
The indicator is built for chart reading and workflow support. It does not attempt to forecast future price movement with certainty, and it should not be interpreted as a standalone trade system. Its role is to help users organize reversal structures, compare them visually, and focus on higher-quality formations when reviewing price action.
Unique Edge
The main distinction of this script is that it does not treat all reversal patterns as equivalent. A detected pattern is further evaluated through a composite quality framework that considers structural symmetry, pullback depth, and volume behavior during formation and break conditions.
For Double Top and Double Bottom structures, the script checks whether the two peaks or troughs remain sufficiently close to each other within a defined tolerance and whether the intermediate pullback is large enough to make the structure meaningful. For Head & Shoulders and Inverse Head & Shoulders structures, the script evaluates shoulder symmetry, time symmetry, and relative positioning of the head against the shoulders.
The volume component is not used as a promise of confirmation. It is used as an additional contextual factor inside the quality score. In general terms, contracting volume during formation and stronger participation during the break candidate can improve the overall score when those conditions are present.
Another important part of the design is visual prioritization. The script does not only draw the structure. It also attempts to keep the chart readable by organizing labels, neckline extensions, and pattern boxes in a way that preserves interpretation. The result is a cleaner reversal-pattern map that aims to be more practical than a simple shape detector.
Methodology
The script begins with swing pivot detection. These pivots act as the structural foundation for all pattern candidates. Once enough pivot highs and lows are available, the script evaluates whether recent pivot sequences fit the requirements of one of the supported reversal structures.
For Double Top detection, the script checks whether two recent highs are similar enough, whether the interim low forms a valid neckline reference, whether the pattern width stays within defined limits, and whether price has broken below the neckline. For Double Bottom detection, the logic is mirrored on the bullish side through two similar lows, an interim high as the neckline reference, and a bullish break condition above that neckline.
For Head & Shoulders detection, the script evaluates a sequence of three pivot highs where the middle high must exceed the two shoulders. It then estimates neckline structure from the lows between those highs and applies symmetry and pullback checks before accepting the setup. Inverse Head & Shoulders applies the same structural concept in reverse using pivot lows.
After a valid break condition is detected, the script calculates a composite quality score. This score is based on user-controlled weights for volume behavior, symmetry, and pullback depth. The final output is normalized into a 1 to 10 quality scale, then translated into a grade label for easier scanning.
Signals & Alerts
The script can generate pattern-based alert conditions for:
- Double Top
- Double Bottom
- Head & Shoulders
- Inverse Head & Shoulders
These alerts are tied to the script’s internal structural conditions and neckline break logic. As with any chart-based alert workflow, users should confirm that the selected settings match their market, timeframe, and execution style.
Visual output can include:
- Pattern boxes
- Neckline lines
- Neckline labels
- Pattern quality labels
- Break candle highlighting
- Information panel with detection statistics
The quality label is intended to summarize the detected structure, not to guarantee outcome quality. A higher score means the pattern aligned more closely with the script’s internal criteria. It does not mean the setup must succeed.
Key Inputs
The script includes adjustable inputs for both detection behavior and presentation. Key controls include:
- Swing Pivot Length
- Peak / Trough Equality tolerance
- Minimum Pullback Between Peaks or Troughs
- Minimum and Maximum Pattern Width
- Minimum Quality to Display
- Weighting of volume, symmetry, and pullback depth inside the quality score
- Box, neckline, and pattern-label visibility
- Global label size
- Panel font size
- Panel position
- Neckline extension length
- Pattern-specific alert toggles
These controls make it possible to adapt the scanner to different chart densities, volatility profiles, and personal visual preferences.
Limitations & Transparency
This indicator is a rule-based pattern scanner. It is not a predictive engine, and it does not claim that all detected formations will lead to continuation or reversal. Classical chart structures can fail, invalidate, or behave differently depending on volatility, trend strength, liquidity conditions, timeframe, and broader market context.
Pattern recognition on live charts is inherently sensitive to pivot settings and bar structure. Small changes in pivot length, equality tolerance, or minimum pullback can materially change how many formations appear. Because of that, users should treat the script as a configurable analytical framework rather than a universal template.
The quality score is an internal ranking model built from the script’s own criteria. It is meant to help compare setups inside the same framework. It should not be interpreted as an objective probability model, a performance promise, or a substitute for independent trade management.
Volume analysis also depends on the reliability and characteristics of the symbol’s reported data. On some instruments, volume may be less informative or behave differently than expected. Users should evaluate this in the context of their own market.
Risk Disclosure
This script is provided for chart analysis, workflow organization, and educational use. It does not provide financial advice, investment advice, or guaranteed trade signals. All trading and investment decisions remain the sole responsibility of the user.
Reversal patterns can fail even when they appear clean and well-structured. Breaks can reverse, neckline moves can trap participants, and high-scoring formations can still underperform. Risk management, confirmation process, position sizing, and overall strategy design remain essential.
Use this tool as a structured visual aid inside a broader decision-making process, not as a standalone reason to enter or exit a position. Indicator
Indicator
Goldilocks and the Three Bears - [Algoat_Alpha]Goldilocks and the Three Bears is a multi-layer confluence indicator that identifies
when three independent technical dimensions — trend, momentum, and direction — all
align in the same direction. Inspired by the classic fairy tale, it waits for
conditions that are "just right" before signaling.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW IT WORKS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The indicator evaluates three independent layers on every bar:
Papa (Trend) — A Moving Average (SMA or EMA) establishes the macro trend.
Price above the MA = bullish trend. Price below = bearish trend. This is the
slowest-moving component and acts as the structural filter.
Mama (Momentum) — The Relative Strength Index measures whether buying or selling
pressure dominates. RSI above the midline (default 50) = bullish momentum.
Below = bearish momentum. This prevents entries against exhausted moves.
Baby (Direction) — The MACD-Signal crossover captures the fastest directional
shift. MACD above its signal line = bullish direction. Below = bearish direction.
This is the trigger layer.
A signal fires only when ALL THREE flip into alignment simultaneously — the exact
bar where the last component joins the other two. This transition-based logic
prevents redundant signals during sustained trends.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHY CONFLUENCE MATTERS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Each indicator alone produces frequent false signals:
• MA alone triggers late in ranges
• RSI alone triggers too early in trends
• MACD alone whipsaws in choppy markets
By requiring all three to agree, the indicator filters out noise that any single
layer would miss. The three layers operate on different mathematical principles
(price vs. average, momentum oscillator, moving average convergence/divergence),
so their agreement represents genuine multi-dimensional confluence — not just the
same signal measured three times.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO USE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
1. Add the indicator to your chart. The dashboard shows the real-time state of
all three layers.
2. When all three show "Bull" → Goldilocks Zone (bullish). A 🐂 label appears
on the chart at the entry bar.
3. When all three show "Bear" → Goldilocks Zone (bearish). A 🐻 label appears.
4. "Still Cooking" means the layers are mixed — no directional consensus yet.
Hover over any signal label for a detailed tooltip showing the exact values
of all three components at the time of the signal.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
FEATURES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Auto light/dark theme detection — dashboard adapts to your chart background
• Discord-ready webhook alerts — alert messages are formatted as Discord embed
JSON, ready to pipe directly into a webhook channel
• Pine Screener compatible — includes Signal State, individual component states,
and a Bull Count (0-3) for flexible scanner filtering
• Minimal chart footprint — only the MA line and signal labels are drawn;
bar coloring is off by default
• Fully configurable — all indicator lengths, thresholds, dashboard position
and size are adjustable in settings
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ALERTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Three alert conditions are available:
• 3 Bulls Aligned (Long Entry)
• 3 Bears Aligned (Short Entry)
• Full Confluence (Any Direction)
All alert messages include ticker, timeframe, price, and component status.
Messages are pre-formatted as Discord webhook JSON — just paste your webhook
URL in PulseWire's alert notification settings.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PINE SCREENER
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Scanner columns exported:
• Signal State → 1 (bullish), -1 (bearish), 0 (no confluence)
• Papa Bull / Mama Bull / Baby Bull → individual component states (1 or 0)
• Bull Count → number of bullish layers (0 to 3), useful for "almost there" scans
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This indicator does not repaint and does not use request.security().
All calculations are performed on the current chart's timeframe.
Open source under MPL 2.0.
Stay Liquid. Indicator
Arbitrage Scanner Pro [Multi-Asset Dashboard]⚡ Arbitrage Scanner Pro
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📌 OVERVIEW
Arbitrage Scanner Pro is a multi-asset monitoring and arbitrage detection system that displays 3 assets simultaneously on one chart. It detects trend divergences between correlated assets, identifies arbitrage opportunities in real-time, and uses speed simulation to make indicators react as if running on sub-minute timeframes (10s, 15s, 30s).
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🧠 HOW IT WORKS
🔹 Speed Simulation Engine
PulseWire's minimum timeframe is 1 minute. This indicator mathematically scales indicator parameters to simulate faster reactions:
• Normal (1m) → Standard indicator behavior
• Simulate 30s → Parameters divided by 2 (2x faster reactions)
• Simulate 15s → Parameters divided by 4 (4x faster reactions)
• Simulate 10s → Parameters divided by 6 (6x faster reactions)
Example in 15s mode: EMA 20 becomes EMA 5, RSI 14 becomes RSI 4, Supertrend Length 5 becomes 1.
🔹 Signal Logic
Each asset runs the same strategy independently using its own price data:
LONG conditions (all must be true):
✅ Supertrend = Bullish (green)
✅ Close > EMA of Highs (breakout above channel)
✅ RSI > 60 (strong momentum)
✅ RSI > RSI Moving Average (momentum accelerating)
✅ Supertrend outside EMA channel (trending, not choppy)
SHORT conditions (all must be true):
✅ Supertrend = Bearish (red)
✅ Close < EMA of Lows (breakdown below channel)
✅ Supertrend outside EMA channel (trending, not choppy)
The "Supertrend outside EMA channel" filter is the key innovation — it eliminates false signals during sideways consolidation by only allowing signals when the market shows a clean directional trend.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 MULTI-ASSET DISPLAY
The indicator creates a stacked 3-panel layout in a single pane:
• Asset A (Main) → Your chart's symbol with overlay indicators
• Asset B (Secondary) → Normalized candles in 0-100 range with full OHLC
• Asset C (Third) → Normalized candles shifted below with adjustable gap
Each secondary asset displays:
📊 Ticker name (e.g., ETHUSDT)
🏛️ Exchange/broker name (e.g., BINANCE) — auto-parsed from symbol
💲 Live price with up to 4 decimal precision
📈 Bar-to-bar percentage change with color coding
Price normalization formula:
Normalized = (Price - 200-bar Low) ÷ (200-bar High - 200-bar Low) × 100
All indicators (EMA channels, Supertrend) are also normalized to the same scale.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔍 ARBITRAGE DETECTION
The core feature — compares trend directions and signal timing across all 3 assets.
🔹 Signal Divergence (strongest signal):
Fires when two assets generate OPPOSITE signals on the same bar.
Example: Asset A = LONG while Asset B = SHORT → ⚠️ Arbitrage Opportunity
🔹 Trend Divergence (ongoing):
Tracks when assets have different Supertrend directions.
Measured as a Divergence Score from 0/3 (all aligned) to 3/3 (all different).
🔹 Convergence Detection:
Fires when ALL 3 assets trigger the same signal simultaneously.
All LONG → Maximum bullish confirmation.
All SHORT → Maximum bearish confirmation.
🔹 Visual Feedback:
• Yellow background flash → Signal divergence detected
• Green background flash → All assets triggered LONG
• Pink background flash → All assets triggered SHORT
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📋 DASHBOARD
The professional dashboard table shows real-time data for all assets:
• ASSET → Parsed ticker name with emoji identifier
• EXCHANGE → Auto-detected exchange/broker (BINANCE, COINBASE, FX, etc.)
• PRICE → Live close price
• CHANGE → Bar-to-bar % change (green/red)
• TREND → Supertrend direction (▲ BULL / ▼ BEAR)
• SIGNAL → Current state (🚀 LONG! / 🔻 SHORT! / 🟢 Long / 🔴 Short / ⚪ Neutral)
Arbitrage Status Section:
• Overall divergence assessment with descriptive message
• Pair-by-pair comparison (A↔B, A↔C, B↔C) — DIVERGED or ALIGNED
• RSI values for all 3 assets side-by-side
• Divergence score (0/3 to 3/3)
Dashboard size, position, and label sizes are all adjustable.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚙️ SETTINGS
🔹 Speed Mode:
Scan Speed → Normal (1m) / Simulate 30s / Simulate 15s / Simulate 10s
🔹 Detection Settings:
Trend Detection Length → Supertrend ATR lookback (default: 5)
Sensitivity Factor → Supertrend ATR multiplier (default: 1.0)
Channel Length → EMA lookback for high/low channel (default: 20)
Momentum Length → RSI period (default: 14)
🔹 Asset Configuration:
Asset B and Asset C can be independently enabled/disabled with custom symbols and candle colors.
🔹 Display Settings:
Show Trend Overlays → Toggle EMA and Supertrend on secondary charts
Signal Style → Labels / Arrows / Both
Gap Between Charts → 80 to 500 (vertical spacing)
Signal Label Offset → Distance of signal labels from candles
🔹 Size Settings:
Dashboard Text Size → Tiny / Small / Normal / Large
Chart Label Size → Tiny / Small / Normal / Large / Huge
Signal Label Size → Tiny / Small / Normal / Large / Huge
Dashboard Position → 9 positions (Top/Mid/Bottom × Left/Center/Right)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔔 ALERTS (12 Total)
Individual (6):
• Asset A LONG / SHORT
• Asset B LONG / SHORT
• Asset C LONG / SHORT
Combined (2):
• ANY asset LONG
• ANY asset SHORT
Arbitrage-Specific (4):
• ⚠️ Signal Divergence detected (opposite signals on same bar)
• 🟢 All 3 assets LONG convergence
• 🔴 All 3 assets SHORT convergence
• 🔶 High divergence score (2+/3)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📈 USE CASES
🔹 Cross-Exchange Arbitrage:
Monitor BTC on BINANCE, COINBASE, and BYBIT simultaneously. When one exchange shows LONG while another shows SHORT, a price discrepancy exists.
🔹 Crypto Correlation Trading:
Watch BTC, ETH, and SOL together. BTC often leads — when BTC triggers LONG first, altcoins typically follow. Enter altcoins on confirmation.
🔹 Forex Multi-Pair Scanning:
Monitor EURUSD, GBPUSD, and USDJPY. When EUR and GBP both show LONG while JPY shows SHORT, it confirms broad USD weakness.
🔹 Index + Sector Rotation:
Track S&P 500 futures alongside QQQ (tech) and XLF (financials). Divergences between sectors reveal which is driving the market.
🔹 News Event Reaction:
Monitor Gold, Dollar Index, and 10-Year Yields during economic releases. The 10s simulation catches reactions within the first minute candle.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ IMPORTANT NOTES
• This uses 1-minute OHLC data — it does NOT create actual sub-minute candles
• Signals fire at bar close, not mid-candle
• The 0-100 normalization can make small moves appear larger
• This is a detection tool — trade execution requires separate infrastructure
• Best used on 1-minute charts where the speed simulation is calibrated
• Always combine with proper risk management
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔧 RECOMMENDED SETTINGS
Crypto (High Volatility): Sim 15s, Length 5, Factor 1.0, Channel 20
Crypto (Low Volatility): Sim 30s, Length 7, Factor 1.5, Channel 25
Forex Majors: Sim 30s, Length 5, Factor 1.5, Channel 20
Stock Indices: Sim 30s, Length 5, Factor 1.0, Channel 15
News Events: Sim 10s, Length 3, Factor 0.5, Channel 10 Indicator
Multi-Timeframe Strength Scanner [JOAT]Multi-Timeframe Strength Scanner
Introduction
The Multi-Timeframe Strength Scanner is an open-source indicator that combines higher timeframe trend analysis with current timeframe momentum indicators to create a comprehensive market strength assessment system. This mashup integrates ADX (Average Directional Index), Donchian Channels, VWAP (Volume Weighted Average Price), RSI divergence detection, and multi-timeframe EMA analysis into a unified scanner that identifies when trend strength aligns across multiple timeframes.
The indicator addresses a critical trading challenge: signals that look strong on one timeframe often fail because higher timeframes are moving in the opposite direction. By analyzing 15-minute, 1-hour, and 4-hour timeframes simultaneously while monitoring current timeframe momentum, this tool helps traders avoid counter-trend trades and identify high-probability setups where multiple timeframes align.
Chart showing multi-timeframe alignment dashboard and strength indicators on 15M timeframe
Why This Mashup Exists
This indicator combines five analytical frameworks that address different aspects of trend strength:
ADX Analysis: Measures trend strength regardless of direction using directional movement
Donchian Channels: Identifies breakouts and trend continuation using price extremes
VWAP: Shows institutional average price and volume-weighted fair value
RSI Divergence: Detects momentum exhaustion at current timeframe swing points
Multi-Timeframe EMAs: Confirms trend direction across 15M, 1H, and 4H timeframes
Each component serves a specific purpose: ADX quantifies trend strength, Donchian Channels identify breakout momentum, VWAP reveals institutional positioning, RSI divergences warn of reversals, and multi-timeframe EMAs ensure directional alignment. Together, they create a strength scanner that filters out weak, counter-trend setups and highlights only those with multi-timeframe confirmation.
The mashup is justified because these components use fundamentally different data (directional movement, price extremes, volume-weighted averages, momentum oscillators, moving averages) that respond to different market conditions. When they align, it indicates genuine trend strength rather than temporary momentum.
Core Components Explained
1. ADX Trend Strength System
ADX (Average Directional Index) measures trend strength on a scale of 0-100:
= ta.dmi(adxLength, adxLength)
// Trend strength classification
strongTrend = adx > adxThreshold // Default: 20
veryStrongTrend = adx > 40
extremeTrend = adx > 60
// Direction determination
bullishTrend = plus > minus
bearishTrend = minus > plus
ADX interpretation:
ADX < 20: Weak trend or ranging market - avoid trend-following strategies
ADX 20-40: Moderate trend strength - standard trend-following viable
ADX 40-60: Strong trend - high-probability trend continuation
ADX > 60: Extreme trend - potential exhaustion or very strong momentum
The indicator plots ADX as a line with color coding:
Green: Strong bullish trend (ADX > 20, +DI > -DI)
Red: Strong bearish trend (ADX > 20, -DI > +DI)
Gray: Weak trend or ranging (ADX < 20)
2. Donchian Channel Breakout System
Donchian Channels track the highest high and lowest low over a specified period:
donchianLength = 20 // Configurable
upperChannel = ta.highest(high, donchianLength)
lowerChannel = ta.lowest(low, donchianLength)
midChannel = (upperChannel + lowerChannel) / 2
Breakout signals:
Bullish Breakout: Close above upper channel = new 20-bar high
Bearish Breakout: Close below lower channel = new 20-bar low
Channel Position: Price near upper channel = bullish strength, near lower = bearish strength
The indicator uses Donchian breakouts to confirm trend strength. When price breaks out of the channel with strong ADX, it signals high-momentum trend continuation.
3. VWAP Analysis
VWAP (Volume Weighted Average Price) calculates the average price weighted by volume:
vwap = ta.vwap(hlc3)
// Position analysis
aboveVWAP = close > vwap // Bullish positioning
belowVWAP = close < vwap // Bearish positioning
// Distance from VWAP
vwapDistance = ((close - vwap) / vwap) * 100
VWAP significance:
Institutional traders use VWAP as benchmark for execution quality
Price above VWAP = buyers in control, institutions paying premium
Price below VWAP = sellers in control, institutions getting discount
Large distance from VWAP = potential mean reversion opportunity
VWAP acts as dynamic support/resistance level
The indicator plots VWAP with dynamic coloring based on price position and uses it for trend confirmation.
4. RSI Divergence Detection
The indicator detects divergences using pivot-based analysis:
rsi = ta.rsi(close, 14)
// Identify swing points
pivotHigh = ta.pivothigh(rsi, 5, 5)
pivotLow = ta.pivotlow(rsi, 5, 5)
// Compare current pivot with previous pivot
bullishDivergence = price makes lower low AND rsi makes higher low
bearishDivergence = price makes higher high AND rsi makes lower high
Divergence types:
Regular Bullish: Price LL, RSI HL - momentum improving, potential reversal up
Regular Bearish: Price HH, RSI LH - momentum deteriorating, potential reversal down
Hidden Bullish: Price HL, RSI LL - trend continuation signal in uptrend
Hidden Bearish: Price LH, RSI HH - trend continuation signal in downtrend
Divergences are marked with "DIV" labels and used to warn of potential trend exhaustion or continuation.
5. Multi-Timeframe EMA Analysis
The indicator analyzes trend direction across three higher timeframes:
// Request higher timeframe data
htf15mEMA = request.security(syminfo.tickerid, "15", ta.ema(close, 21))
htf1hEMA = request.security(syminfo.tickerid, "60", ta.ema(close, 21))
htf4hEMA = request.security(syminfo.tickerid, "240", ta.ema(close, 21))
// Determine trend direction
htf15mBullish = close > htf15mEMA
htf1hBullish = close > htf1hEMA
htf4hBullish = close > htf4hEMA
// Count aligned timeframes
bullishCount = (htf15mBullish ? 1 : 0) + (htf1hBullish ? 1 : 0) + (htf4hBullish ? 1 : 0)
bearishCount = (!htf15mBullish ? 1 : 0) + (!htf1hBullish ? 1 : 0) + (!htf4hBullish ? 1 : 0)
Alignment classification:
STRONG BULL: All 3 timeframes bullish (3/3 alignment)
BULL: 2 out of 3 timeframes bullish
MIXED: Timeframes conflicting (1-1-1 or 2-1 split)
BEAR: 2 out of 3 timeframes bearish
STRONG BEAR: All 3 timeframes bearish (3/3 alignment)
Example showing multi-timeframe alignment dashboard with all three timeframes bullish
Strength Scoring System
The indicator calculates a comprehensive strength score (0-100) by evaluating:
Strength Score Components:
- ADX Strength: Up to 25 points (ADX > 40 = 25, ADX > 20 = 15, ADX < 20 = 0)
- ADX Direction: Up to 15 points (+DI > -DI = 15 for bull, -DI > +DI = 15 for bear)
- Donchian Position: Up to 15 points (breakout = 15, near channel = 10, mid-channel = 5)
- VWAP Position: Up to 15 points (above VWAP = 15 for bull, below = 15 for bear)
- MTF Alignment: Up to 20 points (3/3 = 20, 2/3 = 13, 1/3 = 7)
- RSI Level: Up to 10 points (healthy range = 10, extreme = 5, divergence = -5)
Score interpretation:
80-100: Extremely strong trend - high-probability continuation
60-79: Strong trend - favorable for trend-following
40-59: Moderate trend - selective trend trades
20-39: Weak trend - caution, potential reversal
0-19: Very weak or counter-trend - avoid trend-following
The dashboard displays the strength score with color coding and individual component breakdown.
Visual Elements
ADX Line: Main trend strength indicator with dynamic coloring
+DI/-DI Lines: Directional movement indicators
ADX Threshold: Horizontal line at 20 (configurable)
Donchian Channels: Upper, middle, and lower channel lines
VWAP Line: Volume-weighted average price with dynamic coloring
Divergence Labels: "DIV" markers at RSI divergence points
Strength Bars: Background coloring based on strength score
Dashboard: Comprehensive table showing:
- Current strength score
- ADX value and direction
- Donchian position
- VWAP position
- MTF alignment (15M, 1H, 4H status)
- RSI level
- Overall trend classification
Chart showing strength dashboard with component breakdown and visual indicators
How Components Work Together
The mashup creates a layered strength analysis:
Layer 1 - Trend Strength: ADX quantifies how strong the trend is
Layer 2 - Breakout Momentum: Donchian Channels identify momentum surges
Layer 3 - Institutional Positioning: VWAP shows where smart money is positioned
Layer 4 - Momentum Health: RSI divergences warn of exhaustion
Layer 5 - Multi-Timeframe Confirmation: HTF EMAs ensure directional alignment
Layer 6 - Synthesis: Strength score combines all factors into actionable metric
Example scenario: ADX is 45 (Layer 1), price breaks above Donchian upper channel (Layer 2), trading above VWAP (Layer 3), no RSI divergence (Layer 4), and all three higher timeframes are bullish (Layer 5). The strength score reaches 90 (Layer 6), signaling extremely strong bullish trend with high continuation probability.
Input Parameters
ADX Settings:
ADX Length: Period for ADX calculation (default: 14)
ADX Threshold: Minimum ADX for strong trend (default: 20)
Show +DI/-DI: Toggle directional indicators (default: enabled)
Donchian Settings:
Donchian Length: Period for channel calculation (default: 20)
Show Channels: Toggle channel display (default: enabled)
Breakout Sensitivity: Threshold for breakout signals (default: close beyond channel)
VWAP Settings:
Show VWAP: Toggle VWAP line (default: enabled)
VWAP Reset: Session, Week, Month, or Never (default: Daily)
Distance Alert: Alert when price moves X% from VWAP (default: 2%)
RSI Settings:
RSI Length: Period for RSI calculation (default: 14)
Show Divergences: Toggle divergence markers (default: enabled)
Pivot Lookback: Bars for pivot detection (default: 5)
Multi-Timeframe Settings:
HTF 1: First higher timeframe (default: 15 minutes)
HTF 2: Second higher timeframe (default: 1 hour)
HTF 3: Third higher timeframe (default: 4 hours)
EMA Length: Period for HTF EMAs (default: 21)
Min Alignment: Minimum timeframes aligned for signal (default: 2/3)
Display Options:
Show Dashboard: Toggle strength score table (default: enabled)
Show Strength Bars: Toggle background coloring (default: enabled)
Dashboard Position: Top-right, top-left, bottom-right, bottom-left
Color Theme: Choose between multiple color schemes
How to Use This Indicator
Step 1: Check Multi-Timeframe Alignment
Review the dashboard MTF section. Look for 2/3 or 3/3 alignment in your intended trade direction. Avoid trades when timeframes are mixed or opposing.
Step 2: Verify ADX Strength
Ensure ADX is above 20 (preferably above 30) for trend-following trades. ADX below 20 suggests ranging market where trend strategies underperform.
Step 3: Confirm Donchian Position
Check if price is near or breaking through Donchian channels. Breakouts with strong ADX signal high-momentum moves.
Step 4: Assess VWAP Position
For long trades, prefer price above VWAP. For short trades, prefer price below VWAP. Large distances from VWAP may indicate overextension.
Step 5: Check for Divergences
Look for RSI divergence warnings. If divergence appears with extreme strength score, consider taking profits or tightening stops.
Step 6: Review Strength Score
Use the overall strength score as final filter. Scores above 70 indicate strong trend conditions favorable for trend-following. Scores below 40 suggest caution.
Best Practices
Use on 5-minute to 1-hour timeframes for optimal multi-timeframe analysis
Wait for 2/3 or 3/3 MTF alignment before entering trend trades
Strong ADX (> 30) with MTF alignment produces highest-probability setups
Donchian breakouts with ADX > 25 often lead to sustained moves
VWAP acts as dynamic support/resistance - use for entry refinement
RSI divergences in strong trends often lead to pullbacks, not reversals
Strength score above 80 suggests strong trend continuation potential
Avoid trading when strength score is below 40 unless counter-trend trading
Combine with price action and key levels for precise entries
Indicator Limitations
ADX is lagging indicator - trend strength confirmed after move has started
Donchian breakouts can produce false signals in choppy markets
VWAP resets daily, may not reflect longer-term institutional positioning
Multi-timeframe analysis requires sufficient data history
Strength score is mathematical calculation, not prediction of future movement
Strong trends can reverse suddenly despite high strength scores
Divergences can persist for extended periods in strong trends
Higher timeframe data may repaint on lower timeframes
Requires understanding of trend analysis concepts for effective use
Technical Implementation
Built with Pine Script v6 using:
DMI/ADX calculation with directional indicators
Donchian Channel calculation with breakout detection
VWAP calculation with session reset options
Pivot-based RSI divergence detection
request.security() for multi-timeframe EMA analysis
Comprehensive strength scoring algorithm
Dynamic dashboard with component breakdown
Background coloring based on strength levels
The code is fully open-source and can be modified to adjust timeframes, thresholds, and scoring weights.
Originality Statement
This indicator is original in its multi-timeframe strength integration approach. While individual components (ADX, Donchian Channels, VWAP, RSI divergence, EMAs) are established tools, this mashup is justified because:
It combines trend strength measurement with multi-timeframe directional confirmation
The strength scoring system quantifies trend quality across multiple dimensions
Multi-timeframe analysis prevents counter-trend trades on lower timeframes
Integration of volume-weighted analysis (VWAP) with momentum indicators
Divergence detection provides early warning within trend strength context
Comprehensive dashboard presents complex multi-timeframe data clearly
Each component contributes unique information: ADX measures trend strength, Donchian identifies breakout momentum, VWAP shows institutional positioning, RSI divergences warn of exhaustion, and MTF EMAs ensure alignment. The mashup's value lies in filtering out weak, counter-trend setups and highlighting only those with genuine multi-timeframe strength confirmation.
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any financial instrument. Trading involves substantial risk of loss and is not suitable for all investors.
Trend strength indicators are lagging tools that confirm trends after they've begun. Strong trends can reverse suddenly, and high strength scores do not guarantee trend continuation. Multi-timeframe analysis does not eliminate the risk of losses.
The strength score is a mathematical calculation based on current market data, not a prediction of future price movement. Past trend strength does not guarantee future performance. Market conditions change, and trends that appear strong can reverse without warning.
Always use proper risk management, including stop losses and position sizing appropriate for your account size and risk tolerance. Never risk more than you can afford to lose. Consider consulting with a qualified financial advisor before making investment decisions.
The author is not responsible for any losses incurred from using this indicator. Users assume full responsibility for all trading decisions made using this tool.
-Made with passion by officialjackofalltrades Indicator
Capital Rotational Event CRE As A Multi Pair ScannerCapital Rotational Event (CRE) – Multi Pair Rotation Scanner
This open-source, non-overlay indicator scans for **capital rotation signals** across one lead/benchmark asset and up to four receiver/target assets simultaneously.
It detects when capital appears to be rotating **into** one or more of the receiver assets relative to the lead asset — a classic macro/rotation concept used in intermarket analysis.
Core Concept
In regime-shifting or macro-driven markets, money flows between asset classes or correlated instruments (risk-on → risk-off, equities → bonds, growth → value, etc.). When one asset class starts consistently outperforming another — and that outperformance is accelerating — it can signal a change in investor preference, risk appetite, or sector leadership.
This scanner visualizes that rotation in real time by calculating relative strength + momentum for multiple pairs at once.
How It Works
1. User selects:
- One Lead/ Benchmark asset (default: SPY – equities proxy)
- Up to four Receiver assets (defaults: GLD, TLT, USO, XLE)
2. For each receiver pair:
- Relative Strength (RS) = SMA( Receiver Close / Lead Close , RS Length )
- RS Momentum = SMA( change(RS) , Momentum Length )
3. Rotation Signal per pair:
- Bullish CRE (+1): RS > its own SMA **and** RS momentum > 0
→ Receiver outperforming Lead **and** the outperformance is accelerating
- Bearish CRE (-1): RS < its own SMA **and** RS momentum < 0
→ Receiver underperforming Lead **and** the underperformance is accelerating
- Neutral (0): otherwise
4. Visual Output:
- Four separate lines (green, blue, orange, purple) showing CRE signal for each receiver
→ +1 = bullish rotation into that asset
→ -1 = bearish rotation away from that asset
→ 0 = no clear rotation
- Background tint: light green when **at least one** receiver shows bullish CRE (+1)
Why this multi-pair scanner?
- Single-pair RS tools only show one relationship at a time.
- Monitoring multiple receivers simultaneously reveals **which** asset class or sector is currently receiving capital flows — very useful for macro traders, sector rotation strategies, or risk-on/off positioning.
- The momentum filter reduces lag and false signals compared to raw RS crossovers alone.
Typical Use Cases
- Risk-on/Risk-off: SPY (lead) vs GLD + TLT + USO (safe havens/commodities)
- Sector leadership: SPY vs XLE (energy) + XLK (tech) + XLV (healthcare) + XLF (financials)
- Macro themes: SPY vs TLT (equities vs bonds), DXY vs GLD, etc.
- Timeframes: Daily/weekly for macro swings, 4h/1h for tactical rotations
How to Use
1. Apply to any chart (timeframe of your choice — the indicator is timeframe-agnostic).
2. Set your preferred Lead asset and up to 4 Receivers in the inputs.
3. Adjust RS Length (default 14) and Momentum Length (default 9) to match your horizon.
4. Interpretation:
- Green line above zero → capital rotating into that receiver
- Multiple green lines rising → strong multi-sector rotation
- Light green background → at least one bullish rotation detected
- Use in combination with price action on the actual assets — this is a relative bias tool, not a direct trade signal.
5. Best in trending or regime-shifting markets; less useful when all assets move in strong correlation.
Inputs
- Lead Asset: benchmark (default SPY)
- Receiver 1–4: assets to monitor rotation into (defaults GLD, TLT, USO, XLE)
- RS Length: smoothing for relative strength (default 14)
- Momentum Length: smoothing for RS change (default 9)
Publishing Recommendation
- Publish with a clean chart (e.g., daily or 4h SPY, or any index/ETF)
- The indicator is non-overlay — it plots in a separate pane below price
- No other indicators needed for basic use
This script is fully open-source for transparency and learning. It highlights relative rotation patterns — not guaranteed future performance. Trading and investing involve significant risk of loss.
Feedback welcome — especially suggestions for other useful receiver pairs! Indicator
Stock ScreenerMissing great trade opportunities is annoying, and unless you have 12 screens or only trade one market, you are missing a lot of trades. To fix that, we created this stock screener so you get notified instantly of potential great trading conditions in real time, right on your chart.
You get notified of trading benchmarks being met by the value being displayed on the scanner as well as a color change so that it grabs your attention and makes you aware that you should take a look at the other market and look for a potential trade. It also has built in alerts so you can have an alert notification go off when any of your trading conditions are met instead of needing to watch the scanner for color changes.
The screener will change the ticker symbol background color to red green when price is above or below the previous daily range and above or below both VWAPs. This signals that the ticker is trending, which typically means it is a great time to trade that market and follow the trend.
This stock screener allows you to scan up to 10 different markets at the same time for various different conditions so you always know what is going on with your favorite trading symbols. If you want to scan more tickers, just add the indicator to your chart again and change the table position to the other side of the screen and update the tickers on the 2nd screener, allowing you to have 20 tickers at a time.
The scanner can be fully customized by changing the markets that it screens and turning on or off as many of them as you would like. You can also turn on or off any of the different data sets so that you only get information about trading conditions that matter to you.
The screener can provide data on any type of market, such as stocks, crypto, futures, forex and more. Each ticker can be adjusted to whatever market you would like it to scan for data in the settings panel, the only limitation is that it will not provide data for the VWAP and volume trend score if the ticker you are screening does not provide volume data.
Screener Features
The scanner will provide the following types of data for each ticker that is turned on:
Volume - Provides a volume score compared to the average volume and notifies you of higher than normal volume and volume spikes on individual bars by changing colors.
Volatility - Provides a volatility score compared to the average volatility and notifies you of higher than normal volatility by changing colors.
Oscillator - Choose between the RSI or CCI. The value of that oscillator will be displayed and will notify you when values are in extreme ranges such as overbought or oversold conditions according to the threshold values you enter in the settings panel. When those thresholds have been breached, you will be notified by it changing color.
Big Candles - Compares the current candle to average previous candle sizes, and changes color to notify you of big candles including a big top wick, big bottom wick, big candle body and big candle high to low range.
Daily Level Touches & Trends - Calculates and displays various daily candle and intraday open price levels that act as support and resistance. Notifies you when price is touching any of the daily levels that are turned on. The levels you can have on are as follows: previous day high, previous day low or previous day open. It also will notify you when price is touching the current day’s open, NY 930am open, Asia 8pm open, London 2am open and NY midnight 12am open. It will also say “Above” if price is above the previous day’s high or it will say “Below” if price is below the previous day’s low. The color of the cell will also change when a level touch is happening or price is above the previous day high or below the previous day low.
VWAP - Choose from 2 different VWAP lengths, default settings are daily and weekly VWAPs. You will get notified if price touches either of the VWAPs and they will also say “Above” or “Below” if price is currently above or below each VWAP.
How To Use The Screener To Help You Trade
The main purpose of the screener is to scan other markets and notify you of potential good trading opportunities such as price bouncing off of the daily levels or VWAPs. It can also be used to know when price is trending according to the VWAPs and daily levels. Lastly, you can use it to know how the volume and volatility trends are currently which gives you more confidence in taking a trade with this data when volume and volatility are present.
Volume Score
When volume is high, this represents a good time to trade because there are many market participants and price is likely to be volatile while there is high volume which can present a lot of good trade setups for you to take.
The volume score shown on the screener measures the current volume trend compared to previous volume trends and calculates that into a score based on 100 being the same as the previous volume trend. So any value above 100 means it is high volume and any value less than 100 means it is lower volume than normal.
In the settings panel, you can adjust the volume threshold that needs to be met for a volume notification to show up. The default setting is at 120, so you will get notified when the current volume trend score is 120 or higher or you can adjust that threshold value to whatever value you prefer.
It also will notify you when there is a volume spike on the current bar. This is determined by calculating an average of the recent volume totals and then checking to see if the current bar is greater than or equal to that average multiplied by 3. So if a single bar has volume that is greater than 3 times what the average volume is, then you will get a notification that says “Spike” to make you aware of that volume spike.
The volume trend threshold, volume spike multiplier and lookback length for the average volume used in volume spike calculations can all be adjusted in the settings panel to fit your desired preferences.
Volatility Score
High volatility can mean it is a great time to trade because the market is moving quickly and providing large enough movements that you can get in and out in a short amount of time, while still accruing decent sized trade PnL.
The volatility score will calculate the current volatility for each market compared to previous conditions and then divide the current volatility by the average volatility to give you a volatility score. Anything over 100 means the market is decently volatile and you should look at that market to find potential trade setups to execute on. Anything below 100 means the market is not very volatile and it is usually best to just wait until volatility returns before you start trading again.
The screener will notify you when the volatility score is above the threshold you set. The default value is set to 90, but can be adjusted to your preference. Pay attention to any market that shows an alert and take a look at that chart because the high volatility may present a good trade setup for you in the near future.
Oscillator Score
The oscillator data can be switched between Relative Strength Index(RSI) and Commodity Channel Index(CCI).
The RSI provides a value between 0 and 100 that indicates the momentum and strength of the recent price action. Many traders use the extremes of the 0-100 range to signal overbought or oversold conditions and use that as a sign to look for price to reverse in the near future. The typical values used for this and the default settings to provide notifications are: 70 for overbought and 30 for oversold. The scanner will notify you when the RSI value is considered overbought or oversold so you know to take a look at the chart and analyze if it is ready for a trade to be taken.
The CCI provides a value that can be used to determine the trend strength of the underlying asset when the oscillator moves above 100 or below -100. These extreme values are outside of the normal accumulation range and signify that price is moving strongly in that direction so it may be a good time to take a trade in the direction of the trend. The scanner will show you the value of the CCI for each market and notify you if that value is above 100 or below -100.
Both RSI and CCI settings can be adjusted in the settings panel to your desired settings so you have the exact oscillator settings you prefer to use as well as the exact values that you want to use for being notified.
Big Candles
Big candles can mean that many traders are buying or selling at the same time and many times indicate a good signal to trade in that same direction. That is why we included this calculation in the screener, so you are always aware when a large candle prints.
It calculates the average size of the recent candles and then uses that average as the benchmark to determine if the current candle is considered big and worthy of notifying you to take a look at that chart.
You can adjust the multiplier used for the big candle threshold to whatever you desire, but the default setting is 3 which means the candle will be considered big and notify you if it is 3 times as large as an average candle.
The big candles data will track the following candle values and notify you with these labels:
High to Low candle size = HL
Candle Body from open to close candle size = OC
Top Wick size = TW
Bottom Wick size = BW
Daily Level Touches & Trend
Daily level touches are excellent levels to watch for price to bounce because they often act as support and resistance levels for intraday trading. The scanner will track each market and notify you when the current candle is touching any of the daily levels that you have turned on in the settings panel.
The main levels that are turned on by default and are useful for all markets and how they will be labeled on the scanner are as follows:
Previous Day High = High
Previous Day Low = Low
Previous Day Open = < Open
Previous Day Close = Close
Current Day Open = Open
We also included some extra levels that are useful for futures traders. They are as follows:
NY 930am Open = 930am
NY 12am Midnight Open = 12am
Asia Open at 8pm NY time = Asia
London Open at 2am NY Time = London
Watch how price reacts to these levels and then trade the bounces off of these levels if the price action confirms that it is going to respect that level.
When price is currently above the previous day high, the scanner will say “Above” and show a green color, indicating a bullish trend and that price is above the previous daily candle’s high.
When price is currently below the previous day low, the scanner will say “Below” and show a red color, indicating a bearish trend and that price is below the previous daily candle’s low.
Pay attention to when price is trending above or below the previous daily candle as those trends can provide excellent trend trading opportunities.
The daily levels that you have turned on in the settings will also show as lines on the chart and include a label next to them, identifying each level so you know what each line represents. You can turn on or off all of the lines shown on the chart in the main settings or turn them off one by one in the style panel of the settings. Labels can also be turned on or off for all of the lines in the main settings panel. You can adjust the label positioning in the Label Offset section of the settings panel.
VWAP Touches & Trend
VWAP stands for volume weighted average price and is a very popular tool that traders use to determine trend direction based on volume as well as an excellent level to trade price bounces off of.
The typical VWAP time period used is Daily, which means the volume weighted average price will reset at the beginning of a new day. We set the first VWAP to be the daily VWAP by default and the second one to be the weekly VWAP. You can adjust both of the time periods to be any of the provided time lengths that you choose.
The screener will show “Above” with a green background color when price is above the VWAP, indicating a bullish trend. It will show “Below” with a red background color when price is below the VWAP, indicating a bearish trend. When both VWAPs are showing Above or Below, you can expect price to trend in that direction, so look for pullbacks you can trade in the direction of the trend. If the VWAPs are showing different directions, then you should expect to bounce back and forth between the VWAPs, but be careful and watch out for price to break beyond either one and start a trend.
When the current candle is touching the VWAP, the scanner will change colors and say VWAP to notify you that price is touching the VWAP and you should look at that chart and analyze the market for a potential bounce off of the VWAP to trade.
Trending Market Signals
Strong trends are excellent markets to trade and can many times provide excellent trading opportunities that don’t require expert price action reading skills to be able to take winning trades from. That is why we included a signal to notify you of a strong trending market.
The strong trending market will show up as a green or red background color for the ticker name. If the color of the ticker name is green, it is notifying you that the price is above the previous daily high, above VWAP 1 and above VWAP 2 and is a good market to look for bullish trend trades. If the color of the ticker name is red, it is notifying you that the price is below the previous daily low, below VWAP 1 and below VWAP 2 and is a good market to look for bearish trend trades.
Changing The Tickers It Scans
To change the tickers that the indicator scans, scroll near the bottom of the settings panel and select the ticker symbol you want to update and then search for the exact symbol you want to use. If you want to scan less tickers, then just turn some of the tickers off that you don’t need.
Scanning More Than 10 Tickers
If you want to scan more than 10 tickers, you can add the scanner to your chart again and then just change the table position to the other side of the screen. This will allow you to scan 10 more tickers that will show up separately. Then if you want even more, just add the indicator to your chart again and update the table position until you have as many markets as you want. The table position setting can be found at the bottom of the main settings panel.
Alerts
The screener has alerts that can be used to notify you when any of the data set thresholds have been met or if price is touching one of the levels. You can set alerts for the following events:
Bullish Trend Alert - Price is above the previous daily high and above both VWAPs.
Bearish Trend Alert - Price is below the previous daily low and below both VWAPs.
High Volume Alert - Volume is higher than the threshold or a volume spike is detected.
High Volatility Alert - Volatility is higher than the threshold.
Oscillator Is Extended Alert - Oscillator value has exceeded the upper or lower threshold.
Big Candle Alert - A big candle has been detected.
Daily Level Touch Alert - One of the daily levels that is turned on is being touched.
VWAP Touch Alert - One of the 2 VWAPs are being touched.
An alert will trigger when any one of tickers on your scanner meets the alert conditions, so when you see the alert, you will need to go to your chart and look at the scanner to see which ticker it was and then navigate to that chart to look for potential trade setups.
The alerts will use the exact same settings you have configured in the settings panel to send you alert notifications. With normal settings, this could give you a lot of alerts, so if you only want alerts to fire when abnormal conditions are being met, try setting up a second screener on your chart that has very high threshold values and only has the most important level touches on. Then turn the setting "Do Not Show The Screener On The Chart" to off so the calculations will still run and fire alerts, but won't clog up your charts. This way you can only get alert notifications when major events happen but still have your normal screener settings available on your chart.
Markets This Can Be Used On
This screener uses the price action and volume data so you can use it to scan any type of market you would like as long as the ticker you are scanning has price and volume data feeds. If a market does not have volume data, then it will just show NaN in the volume row and the VWAP rows will not show anything. Indicator
Indicator
Photon Price Action Scanner [JOAT]Photon Price Action Scanner - Multi-Pattern Recognition with Adaptive Filtering
Introduction and Purpose
Photon Price Action Scanner is an open-source overlay indicator that automates the detection of 15+ candlestick patterns while filtering them through multiple confirmation layers. The core problem this indicator solves is pattern noise: raw candlestick pattern detection produces too many signals, most of which fail because they lack context. This indicator addresses that by combining pattern recognition with trend alignment, volume-weighted strength scoring, velocity confirmation, and an adaptive neural bias filter.
The combination of these components is not arbitrary. Each filter addresses a specific weakness in standalone pattern detection:
Trend alignment ensures patterns appear in favorable market structure
Volume-weighted strength filters out weak patterns with low conviction
Velocity confirmation identifies momentum behind the pattern
Neural bias filter adapts to recent price behavior to avoid counter-trend signals
What Makes This Indicator Original
While candlestick pattern scanners exist, this indicator's originality comes from:
1. Multi-Layer Filtering System - Patterns must pass through trend, strength, velocity, and neural bias filters before generating signals. This dramatically reduces false positives compared to simple pattern detection.
2. Adaptive Neural Bias Filter - A custom momentum-adjusted EMA that learns from recent price action using a configurable learning rate. This is not a standard moving average but an adaptive filter that accelerates during trends and smooths during consolidation.
3. Pattern Strength Scoring - Each pattern receives a strength score based on volume ratio and body size, allowing traders to focus on high-conviction setups rather than every pattern occurrence.
4. Smart Cooldown System - Prevents signal overlap by enforcing minimum bar spacing between pattern labels, keeping charts clean even when "Show All Patterns" is enabled.
How the Components Work Together
Step 1: Pattern Detection
The indicator scans for 15 candlestick patterns using precise mathematical definitions:
// Example: Bullish Engulfing requires the current bullish candle to completely
// engulf the previous bearish candle with a larger body
isBullishEngulfing() =>
bool pattern = close < open and close > open and
open <= close and close >= open and
close - open > open - close
pattern
// Example: Three White Soldiers requires three consecutive bullish candles
// with each opening within the previous body and closing higher
isThreeWhiteSoldiers() =>
bool pattern = close > open and close > open and close > open and
close < close and close < close and
open > open and open < close and
open > open and open < close
pattern
Step 2: Strength Calculation
Each detected pattern receives a strength score combining volume and body size:
float volRatio = avgVolume > 0 ? volume / avgVolume : 1.0
float bodySize = math.abs(close - open) / close
float baseStrength = (volRatio + bodySize * 100) / 2
This ensures patterns with above-average volume and large bodies score higher than weak patterns on low volume.
Step 3: Trend Alignment
Patterns are checked against the trend direction using an EMA:
float trendEMA = ta.ema(close, i_trendPeriod)
int trendDir = close > trendEMA ? 1 : close < trendEMA ? -1 : 0
Bullish patterns in uptrends and bearish patterns in downtrends receive priority.
Step 4: Neural Bias Filter
The adaptive filter uses a momentum-adjusted EMA that responds to price changes:
neuralEMA(series float src, simple int period, simple float lr) =>
var float neuralValue = na
var float momentum = 0.0
if na(neuralValue)
neuralValue := src
float error = src - neuralValue
float adjustment = error * lr
momentum := momentum * 0.9 + adjustment * 0.1
neuralValue := neuralValue + adjustment + momentum
neuralValue
The learning rate (lr) controls how quickly the filter adapts. Higher values make it more responsive; lower values make it smoother.
Step 5: Velocity Confirmation
Price velocity (rate of change) must exceed the average velocity for strong signals:
float velocity = ta.roc(close, i_trendPeriod)
float avgVelocity = ta.sma(velocity, i_trendPeriod)
bool velocityBull = velocity > avgVelocity * 1.5
Step 6: Signal Classification
Signals are classified based on how many filters they pass:
Strong Pattern : Pattern + strength threshold + trend alignment + neural bias + velocity
Ultra Pattern : Strong pattern + gap in same direction + velocity confirmation
Watch Pattern : Pattern detected but not all filters passed
Detected Patterns
Classic Reversal Patterns:
Bullish/Bearish Engulfing - Complete body engulfment with larger body
Hammer - Long lower wick (2x body), small upper wick, bullish context
Shooting Star - Long upper wick (2x body), small lower wick, bearish context
Morning Star - Three-bar bullish reversal with small middle body
Evening Star - Three-bar bearish reversal with small middle body
Piercing Line - Bullish candle closing above midpoint of previous bearish candle
Dark Cloud Cover - Bearish candle closing below midpoint of previous bullish candle
Bullish/Bearish Harami - Small body contained within previous larger body
Doji - Body less than 10% of total range (indecision)
Advanced Patterns (Optional):
Three White Soldiers - Three consecutive bullish candles with rising closes
Three Black Crows - Three consecutive bearish candles with falling closes
Tweezer Top - Equal highs with reversal candle structure
Tweezer Bottom - Equal lows with reversal candle structure
Island Reversal - Gap isolation creating reversal structure
Dashboard Information
The dashboard displays real-time analysis:
Pattern - Current detected pattern name or "SCANNING..."
Bull/Bear Strength - Volume-weighted strength scores
Trend - UPTREND, DOWNTREND, or SIDEWAYS based on EMA
RSI - 14-period RSI for momentum context
Momentum - 10-period momentum reading
Volatility - ATR as percentage of price
Neural Bias - BULLISH, BEARISH, or NEUTRAL from adaptive filter
Action - ULTRA BUY/SELL, BUY/SELL, WATCH BUY/SELL, or WAIT
Visual Elements
Pattern Labels - Abbreviated codes (BE=Engulfing, H=Hammer, MS=Morning Star, etc.)
Neural Bias Line - Adaptive trend line showing filter direction
Gap Boxes - Cyan boxes highlighting price gaps
Action Zones - Dashed boxes around strong pattern areas
Velocity Markers - Small circles when velocity confirms direction
Ultra Signals - Large labels for highest conviction setups
How to Use This Indicator
For Reversal Trading:
1. Wait for a pattern to appear at a key support/resistance level
2. Check that the Action shows "BUY" or "SELL" (not just "WATCH")
3. Confirm the Neural Bias aligns with your trade direction
4. Use the strength score to gauge conviction (higher is better)
For Trend Continuation:
1. Identify the trend using the Trend row in the dashboard
2. Look for patterns that align with the trend (bullish patterns in uptrends)
3. Ultra signals indicate the strongest continuation setups
For Filtering Noise:
1. Keep "Show All Patterns" disabled to see only filtered signals
2. Increase "Pattern Strength Filter" to see fewer, higher-quality patterns
3. Enable "Velocity Confirmation" to require momentum behind patterns
Input Parameters
Scan Sensitivity (1.0) - Overall detection sensitivity multiplier
Pattern Strength Filter (3) - Minimum strength score for strong signals
Trend Period (20) - EMA period for trend determination
Show All Patterns (false) - Display all patterns regardless of filters
Advanced Patterns (true) - Enable soldiers/crows/tweezer detection
Gap Analysis (true) - Enable gap detection and boxes
Velocity Confirmation (true) - Require velocity for strong signals
Neural Bias Filter (true) - Enable adaptive trend filter
Neural Period (50) - Lookback for neural bias calculation
Neural Learning Rate (0.12) - Adaptation speed (0.01-0.5)
Timeframe Recommendations
1H-4H: Best balance of signal frequency and reliability
Daily: Fewer but more significant patterns
15m-30m: More signals, requires tighter filtering (increase strength threshold)
Limitations
Pattern detection is mechanical and does not consider fundamental context
Neural bias filter may lag during rapid trend reversals
Gap detection requires clean price data without after-hours gaps
Strength scoring favors high-volume patterns, which may miss valid low-volume setups
- Made with passion by officialjackofalltrades
Indicator
Predictive Analysis Engine — Adaptive MACD Forecasting with R² SProfessional and Rule-Compliant Description (Ready for Publishing)
This description explains every component of the script in detail, highlights its originality, and provides traders with clear usage instructions — exactly what PulseWire expects.
Predictive Analysis Engine (PAE)
This script is a predictive analysis model that combines trend filtering, linear forecasting, stability analysis (R²), and outlier filtering using ATR to produce an advanced, leading-style version of MACD rather than a traditional lagging one.
The indicator does not rely on random elements; it is built on four core components that work together:
1. Stability Measurement Using R²
The coefficient of determination (R²) is calculated based on the correlation between price and time, then normalized to a 0–1 scale.
A higher R² indicates more stable price movement, allowing the script to increase forecast accuracy.
Here, R² acts as a primary component of the Confidence Filter.
2. Forecasted Price Using Linear Regression
Instead of relying solely on the current price, the script uses:
Linear Regression
Weighted blending between the forecasted price and actual price
This enables the script to build a Leading MACD based on an “advanced” price that anticipates probable movement.
3. Advanced MACD With Adaptive Smoothing
MACD is applied to the blended (real + forecasted) price using:
Fast EMA
Slow EMA
MACD base
Optional TEMA for reducing signal lag
Adjustable histogram smoothing
This process makes MACD more responsive with significantly less lag, reacting faster to predicted movements.
4. Predictive MACD (Projected MACD)
Linear Regression is applied again — but this time to:
MACD
Signal
Histogram
to generate projected versions of each line (proj_macd, proj_signal), while proj_hist is used to produce early signals before the actual crossover occurs.
5. Volatility Filtering Using ATR & Volatility Ratio
ATR is used to evaluate:
Strength of movement
Overextension levels
Signal quality
ATR is combined with R² to compute:
Confidence = R² × Volatility Ratio
This suppresses weak signals and boosts high-quality, reliable ones.
6. Predictive Signals + Safety Filters
A signal is triggered when:
proj_hist crosses the 0 level
Confidence exceeds the required threshold
The real histogram is not excessively stretched (extra safety)
The script includes:
BUY / SELL
BUY_STRONG / SELL_STRONG
based on the smoothed histogram trend.
7. Coloring, Background & Visual Enhancements
The script colors:
The histogram
Chart background
Signal lines
to clearly highlight momentum direction and confidence conditions.
8. Built-In Alerts
The script provides ready-to-use alerts:
BUY Alert
SELL Alert
Both based on the predictive MACD model.
How to Use the Script
Add it to any timeframe and any market.
BUY/SELL signals are generated from the projected histogram crossover.
Higher Confidence = stronger signal.
Background colors help visualize trend transitions instantly.
Recommended to combine with support/resistance or price action.
Indicator Objective
This script is designed to deliver early insight into momentum shifts using a blend of:
Linear forecasting
Trend stability via R²
Signal quality filtering via ATR
A fast and adaptive advanced MACD Indicator
MTF Checklist DashboardMTF Checklist Dashboard
Overview
The MTF Checklist Dashboard is an advanced multi-timeframe analysis tool that provides traders with a comprehensive visual dashboard to analyze market conditions across six customizable timeframes simultaneously. This indicator combines multiple technical analysis methods, including Opening Range Breakouts (ORB), VWAP, EMAs, and daily price levels, to generate high-probability confluence-based trading signals.
Unlike traditional single-timeframe indicators, this dashboard displays all critical information in one organized table, allowing traders to instantly identify when multiple timeframes align for optimal entry and exit opportunities.
Key Features
Multi-Timeframe Analysis
Analyzes up to 6 timeframes simultaneously (default: 1m, 5m, 15m, 30m, 1h, 4h)
Fully customizable timeframe selection via comma-separated input
Color-coded cells for instant visual recognition (green=bullish, red=bearish, yellow=neutral)
Technical Indicators Tracked
Current and previous candle direction
Opening Range Breakout (ORB) positioning with custom period
VWAP relationship (above/below)
200 EMA positioning
Daily and previous day high/low proximity
EMA crossovers (9 vs 21, both vs 200)
Advanced Signal Filtering System
Confluence scoring: Requires multiple timeframes to align (3-6 timeframes)
Higher timeframe confirmation: Ensures 30m/1h/4h agreement
Volume filter: Confirms signals with above-average volume (1.5x default)
ATR volatility filter: Validates sufficient market movement
Session timing: Restricts signals to optimal trading hours (EST)
Momentum confirmation: Requires recent directional strength
Range positioning: Blocks signals near daily extremes
Candle strength: Validates strong directional candles (60%+ body ratio)
Visual Signals
Optional entry arrows (above/below bars)
Background color highlighting
Organized dashboard with real-time price levels
ORB range, current day, and previous day summary rows
Alert Conditions
JSON-formatted alerts for automated trading integration
Separate alerts for long entry, short entry, long exit, and short exit
Compatible with webhook automation systems
How To Use
Dashboard Interpretation
The dashboard displays a color-coded table with the following columns:
TF: Timeframe being analyzed
C: Current candle (Green=bullish, Red=bearish)
P: Previous candle (Green=bullish, Red=bearish)
ORB: Opening Range Breakout position (A=Above, B=Below, W=Within)
VWAP: Price vs VWAP (A=Above, B=Below)
E200: Price vs 200 EMA (A=Above, B=Below)
D Hi/Lo: Proximity to current day high/low (Hi/Lo/Mid)
PD Hi/Lo: Proximity to previous day high/low (Hi/Lo/Mid)
9 vs 21: EMA 9 vs EMA 21 relationship (A=9 above 21, B=9 below 21)
9&21 v200: Both EMAs vs 200 EMA (>>=both above, <<=both below, <>=mixed)
Signal Generation
Long Entry Signal triggers when:
Minimum number of timeframes show bullish alignment (default: 5 of 6)
Higher timeframes (30m/1h/4h) confirm direction (default: 2 of 3)
Price breaks above ORB high with sufficient distance
Volume exceeds average by specified multiplier
ATR shows adequate volatility
Trade occurs during optimal session hours
Recent momentum is upward
Price not too close to daily high
Strong bullish candle forms
Short Entry Signal uses opposite conditions
Exit Signals trigger when opposing timeframe confluence reaches threshold (default: 3 timeframes)
Recommended Workflow
Select your asset and primary trading timeframe
Observe the dashboard - Look for rows showing mostly green (bullish) or red (bearish)
Wait for alignment - The indicator will show arrows when confluence requirements are met
Check the bottom rows - Review ORB levels and daily ranges for context
Set alerts - Enable PulseWire alerts using the built-in alert conditions
Manage risk - Use appropriate position sizing and stop losses based on ORB range or daily ATR
Settings Guide
Basic Settings
Timeframes: Enter comma-separated values (e.g., "1,5,15,30,60,240")
Show Header: Toggle column headers on/off
ORB Minutes: Set opening range period (default: 15 minutes)
Near % for daily highs/lows: Define proximity threshold (default: 0.20%)
Use close for comparisons: Compare using close vs current price
Dashboard Position: Choose from 9 screen positions
Confluence Filters
Minimum Timeframes Aligned: Set required confluence (3-6, default: 5)
Require Higher Timeframe Confirmation: Toggle HTF requirement on/off
Min Higher Timeframes: Specify HTF agreement needed (1-3, default: 2)
Volume Filter
Volume Confirmation: Enable/disable volume filtering
Volume vs Average: Set multiplier threshold (default: 1.5x)
Volume Average Length: Period for volume average (default: 20 bars)
Volatility Filter (ATR)
Volatility Filter: Enable/disable ATR confirmation
ATR Length: Calculation period (default: 14)
Min ATR vs Average: Required ATR level (default: 0.5x = 50%)
ORB Filters
ORB Breakout Distance Required: Toggle distance requirement
Min Breakout % Beyond ORB: Additional breakout threshold (default: 0.10%)
Session Filter
Trade Only During Best Hours: Enable time-based filtering
Session 1: First trading window (default: 0930-1130 EST)
Session 2: Second trading window (default: 1400-1530 EST)
Momentum Filter
Recent Momentum Required: Enable directional momentum check
Lookback Bars: Period for momentum comparison (default: 3 bars)
Daily Range Filter
Block Signals Near Daily Extremes: Prevent entries at extremes
Distance from High/Low %: Minimum distance required (default: 2.0%)
Candle Filter
Strong Directional Candle: Require candle strength
Min Candle Body %: Body-to-range ratio threshold (default: 60%)
Visual Signals
Show Entry Signals: Master toggle for visual signals
Show Arrows: Display entry arrows on chart
Background Color: Enable background highlighting
Best Practices
Start with default settings and adjust based on your trading style and asset volatility
Higher confluence requirements (5-6 timeframes) produce fewer but higher-quality signals
Enable all filters for conservative trading; disable some for more frequent signals
Use the dashboard as confirmation alongside your existing trading strategy
Backtest on your specific instruments before live trading
Consider market conditions—trending vs ranging markets may require different settings
Alerts
This indicator includes four alert conditions with JSON formatting for webhook integration:
Long Entry Signal: Triggers when all long conditions are met
Short Entry Signal: Triggers when all short conditions are met
Long Exit Signal: Triggers when opposing confluence reaches exit threshold
Short Exit Signal: Triggers when opposing confluence reaches exit threshold
Alert messages include ticker symbol, action (buy/sell), price, and quantity for automated trading systems.
Important Notes
This indicator works best on liquid instruments with clear price action
Highly volatile markets may require adjusted ATR and ORB distance settings
Session times are in EST timezone—adjust if trading non-US markets
The ORB calculation requires sufficient price history for the day
Signals are generated in real-time but should be confirmed at candle close
Limitations
Maximum of 6 timeframes can be analyzed due to PulseWire's security call limits
ORB calculations may not work correctly on instruments with gaps or irregular sessions
The indicator is most effective during regular market hours when volume and volatility are adequate
Lower timeframes (1m, 5m) may produce more false signals in choppy conditions
License
Mozilla Public License 2.0 (MPL-2.0)
This indicator is licensed under the Mozilla Public License 2.0. You are free to use, modify, and distribute this code under the terms of the MPL-2.0. The full license text is available at mozilla.org
Key license provisions:
You may use this code commercially
You may modify and distribute modified versions
Modified versions must be released under the same license
You must include the original license notice in any distributions
No trademark rights are granted
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice, and past performance does not guarantee future results. Trading involves substantial risk of loss. Always:
Practice proper risk management
Test thoroughly on paper/demo accounts before live trading
Use appropriate position sizing
Never risk more than you can afford to lose
Consult with a financial advisor for personalized advice
The creator assumes no liability for trading losses incurred using this indicator.
Version: 2.0
Pine Script Version: v6
Author: © EliasVictor
Indicator
Breakout ScannerThis is a Breakout Scanner that shows you the immediate trend across 4 higher timeframes for up to 10 different tickers. It calculates a score from 1 to 3 for bullish and -1 to -3 for bearish based on where price is currently at compared to the previous higher timeframe’s candle levels.
When price is breaking out of the previous higher timeframe candle’s range, then it will have a score of 3 for bullish breakout or -3 for bearish breakout. When price is above the high or below the low of multiple different higher timeframe candles, you can expect price to continue the breakout and move to a new area of price range.
The brighter red or green the color is, the stronger the trend is on that timeframe. When it shows a bright green or red box on the far right side of a ticker, it is notifying you that the ticker is bullish or bearish on all timeframes and trending strongly, so switch over to that chart and look to trade in the direction of that trend.
The tickers, colors and time frames can be customized to suit your preference and you can also turn off as many tickers or time frames as you’d like if you want less tickers or time frames to show up on the indicator. It also includes alerts for when all timeframes are bullish or all timeframes are bearish for one ticker.
Make sure to keep each timeframe set to a timeframe that is higher than your chart timeframe.
Bullish Scoring & Colors
If the current candle close is above the midline of the higher time frame candle, it is given a score of 1 and a dark green background. If the current candle close is above the higher timeframe candle body, then it is given a score of 2 and a medium green background. If the current candle close is above the high of the higher time frame candle, it is given a score of 3 and a bright green background.
The higher the score the stronger the bullish trend and the brighter green the color will be.
Bearish Scoring & Colors
If the current candle close is below the midline of the higher timeframe candle, it is given a score of -1 and a dark red background. If the current candle close is below the higher timeframe candle body, then it is given a score of -2 and a medium red background. If the current candle close is below the low of the higher timeframe candle, it is given a score of -3 and a bright red background.
The lower the score, the stronger the bearish trend and the brighter red the color will be.
Total Score Display
On the right side of the indicator table, there is a column that displays the total score by adding all the scores together so you can easily tell the overall strength of the trend across all timeframes. Wait for the trend score to be at least 75% of the possible score to trade so you can ensure you are only trading very strong trends and increase your probability of winning your trade. The total score will update according to how many time frames you have enabled in the settings. You can also turn on or off the total score count if you prefer. The default setting is off.
All Timeframe Trends Agree
When all of the timeframes that you have turned on are in the same direction at the same time, a green or red box will appear on the far right side of the scanner. This is a visual cue that lets you know the strongest trending markets without having to read any of the numbers. Make sure to check out the charts for the markets that have a green or red box on the far right side and look for potential trend trading opportunities.
Alerts
You can set alerts for when all time frames for a certain ticker are bullish or bearish. If you have some time frames turned off at the time of creating your alerts, then it will only require all time frames that are on to be all bullish or bearish to generate an alert. Make sure to set your alerts to once per bar close to ensure you don’t get premature alerts that aren’t yet valid.
Best Way To Use The Scanner
For best results, make sure you wait for the trend to show all bullish or all bearish at the same time and then look to trade in the direction of the strong trend. If you can be patient enough to do that, you will increase the probability of winning your trade because you are trading with the direction of the overall higher timeframe trend when the market is trending strongly and making new highs or lows.
When one of the markets in the scanner shows all timeframes trending, go to that chart and see how price action is reacting to the previous higher timeframe candle levels. You can see those levels easily by adding our Higher Timeframe Candle Levels indicator to your chart and using the same timeframes as your Breakout Scanner is using.
If price is holding the higher timeframe candle levels well, then look to place trades in the direction of the trend that the Breakout Scanner is showing.
Other Indicators To Pair This With
Use this in combination with our Higher Timeframe Candle Levels indicator so you can see all of these levels being used to calculate the trend strength scores and watch how price reacts to those levels. You should also use our Trend Strength Indicator to easily read the historical trends of price compared to the higher timeframes and use those trends to guide you on when to trade and which direction to trade.
Trend Strength Indicator, Higher Timeframe Candle Levels and the Breakout Scanner all use the same levels to calculate the trend scores so they are designed to work all together to help you quickly be able to read a chart and find what direction to trade in.
Indicator
Indicator
Ichimoku Screener [Pineify]Advanced Multi-Timeframe Ichimoku Screener - Complete Market Analysis Tool
This sophisticated Ichimoku Screener represents a comprehensive approach to multi-timeframe market analysis, combining four distinct Ichimoku-based indicators into a unified screening system. Unlike traditional single-symbol indicators, this screener provides simultaneous analysis across multiple assets and timeframes, enabling traders to identify optimal trading opportunities with enhanced precision and efficiency.
Key Features
Multi-asset screening capability for up to 10 symbols simultaneously
Four customizable timeframes per symbol for comprehensive analysis
Four integrated Ichimoku-based indicators working in harmony
Real-time visual feedback with color-coded signals
Customizable Ichimoku parameters for personalized analysis
Clean, organized table display for easy interpretation
Automated signal strength assessment and timing
How It Works
The screener employs the traditional Ichimoku Kinko Hyo methodology, utilizing five core components: Conversion Line (Tenkan-sen), Base Line (Kijun-sen), Leading Span A (Senkou Span A), Leading Span B (Senkou Span B), and displacement calculations. Each component is mathematically calculated using specific period lengths:
Conversion Line = (Highest High + Lowest Low) / 2 over conversion period
Base Line = (Highest High + Lowest Low) / 2 over base period
Leading Span A = (Conversion Line + Base Line) / 2
Leading Span B = (Highest High + Lowest Low) / 2 over lagging span period
The screener processes these calculations across multiple securities simultaneously using PulseWire's security() function, enabling real-time cross-asset analysis. The system tracks state changes using barssince() functions to provide precise timing information for each signal type.
Trading Ideas and Insights
This screener excels in identifying momentum convergence patterns where multiple Ichimoku components align across different timeframes. The most powerful signals occur when:
Cloud color aligns with price position relative to the cloud
Conversion Line crosses above/below Base Line in the same direction as cloud bias
Multiple timeframes show consistent directional bias
Entry signals appear with minimal bars since formation (indicating fresh momentum)
For trend following strategies , focus on symbols where the cloud maintains consistent color across higher timeframes while showing recent entry signals on lower timeframes. For reversal opportunities , identify assets where cloud color changes coincide with price re-entering the cloud after extended periods above or below.
The screener particularly excels in cryptocurrency and forex markets where momentum shifts can be dramatic and sustained. By monitoring multiple timeframes simultaneously, traders can identify when short-term signals align with longer-term trends, significantly improving trade success probability.
How Multiple Indicators Work Together
The four integrated indicators create a comprehensive analytical framework through synergistic interaction:
Ichimoku Cloud (IchiCld) establishes the primary trend bias by comparing Leading Span A with Leading Span B. When Span A > Span B, the cloud displays bullish characteristics; when Span A < Span B, bearish characteristics emerge. The indicator tracks duration since the last cloud color change, providing momentum persistence insight.
Ichimoku Lagging Cloud (IchiLagCld) determines price position relative to the displaced cloud formation. This indicator identifies whether current price action occurs above, below, or within the cloud structure, revealing support/resistance dynamics and trend confirmation signals.
Conversion vs Base (IchiC>Base) monitors the relationship between short-term (Conversion Line) and medium-term (Base Line) momentum. Crossovers in this relationship often precede significant price movements and provide early trend change warnings.
Ichimoku Entry (IchiEnt) synthesizes all components into actionable signals by requiring alignment between cloud bias, price position, and conversion/base relationship. This multi-factor confirmation approach significantly reduces false signals while maintaining sensitivity to genuine momentum shifts.
The mathematical foundation ensures that each indicator contributes unique information while maintaining logical consistency. The system's strength lies in requiring multiple confirmations before generating entry signals, following Ichimoku's original philosophy of comprehensive market analysis.
Unique Aspects
This implementation distinguishes itself through several innovative features:
Advanced State Tracking : Unlike standard Ichimoku indicators that show current values, this screener tracks duration since state changes , providing crucial timing information for signal freshness and momentum strength assessment.
Multi-Asset Efficiency : The screener eliminates the need to manually check multiple charts by presenting comparative analysis across assets and timeframes in a single view, dramatically improving analytical efficiency.
Customizable Visual Feedback : The color-coding system adapts to different signal types and strengths, with recent signals receiving enhanced visual prominence to draw attention to fresh opportunities.
Professional Table Architecture : The organized display accommodates up to 40 symbol-timeframe combinations (10 symbols × 4 timeframes), with intelligent pagination for optimal screen utilization.
Signal Correlation Analysis : By displaying multiple timeframes for each symbol, traders can quickly identify timeframe confluence and divergence patterns that would otherwise require extensive manual analysis.
How to Use
Symbol Configuration : Enter up to 10 symbols in the Symbol input group. Use full exchange:ticker format for optimal compatibility (e.g., "BINANCE:BTCUSDT").
Timeframe Selection : Configure four timeframes in ascending order for logical analysis progression. Recommended combinations include 1m/5m/15m/1h for intraday analysis or 1h/4h/1D/1W for swing trading.
Ichimoku Parameters : Adjust the four core parameters based on your trading style:
Conversion Line Length (default: 9) - Controls short-term momentum sensitivity
Base Line Length (default: 26) - Determines medium-term trend identification
Leading Span B Length (default: 52) - Sets long-term trend calculation period
Displacement (default: 26) - Controls forward projection of cloud structure
Signal Interpretation :
Green backgrounds indicate bullish conditions
Red backgrounds indicate bearish conditions
Numerical values show bars since last state change
"L:" prefix indicates long entry signals
"S:" prefix indicates short entry signals
"N/A" indicates neutral/transitional states
Trading Workflow : Scan for symbols showing consistent signals across multiple timeframes, prioritize fresh signals (low bar counts), and use individual charts for precise entry timing and risk management.
Customization
The screener accommodates various trading approaches through parameter adjustment:
Scalping Configuration : Use shorter periods (Conversion: 5, Base: 13, Span B: 26) with 1m/3m/5m/15m timeframes for high-frequency opportunities.
Swing Trading Setup : Employ standard parameters with 4h/1D/3D/1W timeframes for position trading across days or weeks.
Cryptocurrency Optimization : Given crypto's 24/7 nature, consider using 4h/8h/1D/3D combinations for optimal signal timing.
Symbol selection can focus on correlated assets (e.g., major cryptocurrencies) for sector analysis or diverse assets for portfolio opportunity identification. The flexible timeframe configuration allows adaptation to any market's characteristic volatility and trading patterns.
Conclusion
This Advanced Multi-Timeframe Ichimoku Screener transforms traditional single-chart analysis into a comprehensive market monitoring system. By integrating multiple Ichimoku components across various timeframes and assets, it provides traders with unprecedented analytical efficiency and signal reliability.
The mathematical rigor of traditional Ichimoku analysis combines with modern Pine Script capabilities to deliver a professional-grade screening tool. Whether used for identifying trend continuation opportunities, spotting potential reversals, or conducting broad market analysis, this screener offers the analytical depth and practical functionality required for serious trading applications.
The system's emphasis on signal confluence across multiple timeframes and indicators significantly improves trade selection quality while reducing analysis time. For traders seeking to leverage Ichimoku's proven methodology across multiple markets simultaneously, this screener represents an essential analytical upgrade to traditional single-symbol approaches. Indicator
Indicator
Crypto Scanner v4This guide explains a version 6 Pine Script that scans a user-provided list of cryptocurrency tokens to identify high probability tradable opportunities using several technical indicators. The script combines trend, momentum, and volume-based analyses to generate potential buying or selling signals, and it displays the results in a neatly formatted table with alerts for trading setups. Below is a detailed walkthrough of the script’s design, how traders can interpret its outputs, and recommendations for optimizing indicator inputs across different timeframes.
## Overview and Key Components
The script is designed to help traders assess multiple tokens by calculating several indicators for each one. The key components include:
- **Input Settings:**
- A comma-separated list of symbols to scan.
- Adjustable parameters for technical indicators such as ADX, RSI, MFI, and a custom Wave Trend indicator.
- Options to enable alerts and set update frequencies.
- **Indicator Calculations:**
- **ADX (Average Directional Index):** Measures trend strength. A value above the provided threshold indicates a strong trend, which is essential for validating momentum before entering a trade.
- **RSI (Relative Strength Index):** Helps determine overbought or oversold conditions. When the RSI is below the oversold level, it may present a buying opportunity, while an overbought condition (not explicitly part of this setup) could suggest selling.
- **MFI (Money Flow Index):** Similar in concept to RSI but incorporates volume, thus assessing buying and selling pressure. Values below the designated oversold threshold indicate potential undervaluation.
- **Wave Trend:** A custom indicator that calculates two components (WT1 and WT2); a crossover where WT1 moves from below to above WT2 (particularly near oversold levels) may signal a reversal and a potential entry point.
- **Scanning and Trading Zone:**
- The script identifies a *bullish setup* when the following conditions are met for a token:
- ADX exceeds the threshold (strong trend).
- Both RSI and MFI are below their oversold levels (indicating potential buying opportunities).
- A Wave Trend crossover confirms near-term reversal dynamics.
- A *trading zone* condition is also defined by specific ranges for ADX, RSI, MFI, and a limited difference between WT1 and WT2. This zone suggests that the token might be in a consolidation phase where even small moves may be significant.
- **Alerts and Table Reporting:**
- A table is generated, with each row corresponding to a token. The table contains columns for the symbol, ADX, RSI, MFI, WT1, WT2, and the trading zone status.
- Visual cues—such as different background colors—highlight tokens with a bullish setup or that are within the trading zone.
- Alerts are issued based on the detection of a bullish setup or entry into a trading zone. These alerts are limited per bar to avoid flooding the trader with notifications.
## How to Interpret the Indicator Outputs
Traders should use the indicator values as guidance, verifying them against their own analysis before making any trading decision. Here’s how to assess each output:
- **ADX:**
- **High values (above threshold):** Indicate strong trends. If other indicators confirm an oversold condition, a trader may consider a long position for a corrective reversal.
- **Low values:** Suggest that the market is not trending strongly, and caution should be taken when considering entry.
- **RSI and MFI:**
- **Below oversold levels:** These conditions are traditionally seen as signals that an asset is undervalued, potentially triggering a bounce.
- **Above typical resistance levels (not explicitly used here):** Would normally caution a trader against entering a long position.
- **Wave Trend (WT1 and WT2):**
- A crossover where WT1 moves upward above WT2 in an oversold environment can signal the beginning of a recovery or reversal, thereby reinforcing buy signals.
- **Trading Zone:**
- Being “in zone” means that the asset’s current values for ADX, RSI, MFI, and the closeness of the Wave Trend lines indicate a period of consolidation. This scenario might be suitable for both short-term scalping or as an early exit indicator, depending on further market analysis.
## Timeframe Optimization Input Table
Traders can optimize indicator inputs depending on the timeframe they use. The following table provides a set of recommended input values for various timeframes. These values are suggestions and should be adjusted based on market conditions and individual trading styles.
Timeframe ADX RSI MFI ADX RSI MFI WT Channel WT Average
5-min 10 10 10 20 30 20 7 15
15-min 12 12 12 22 30 20 9 18
1-hour 14 14 14 25 30 20 10 21
4-hour 16 16 16 27 30 20 12 24
1-day 18 18 18 30 30 20 14 28
Adjust these parameters directly in the script’s input settings to match the selected timeframe. For shorter timeframes (e.g., 5-min or 15-min), the shorter lengths help filter high-frequency noise. For longer timeframes (e.g., 1-day), longer input values may reduce false signals and capture more significant trends.
## Best Practices and Usage Tips
- **Token Limit:**
- Limit the number of tokens scanned to 10 per query line. If you need to scan more tokens, initiate a new query line. This helps manage screen real estate and ensures the table remains legible.
- **Confirming Signals:**
- Use this script as a starting point for identifying high potential trades. Each indicator’s output should be used to confirm your trading decision. Always cross-reference with additional technical analysis tools or market context.
- **Regular Review:**
- Since the script updates the table every few bars (as defined by the update frequency), review the table and alerts regularly. Market conditions change rapidly, so timely decisions are crucial.
## Conclusion
This Pine Script provides a comprehensive approach for scanning multiple cryptocurrencies using a combination of trend strength (ADX), momentum (RSI and MFI), and reversal signals (Wave Trend). By using the provided recommendation table for different timeframes and limiting the tokens to 20 per query line (with a maximum of four query lines), traders can streamline their scanning process and more effectively identify high probability tradable tokens. Ultimately, the outputs should be critically evaluated and combined with additional market research before executing any trades.
Indicator
Swing Structure Scanner [LuxAlgo]The Swing Structure Scanner Indicator is a dashboard type indicator which displays a Consolidated "High/Low-Only" view of swing structure, with the capability to retrieve and display swing points from up to 6 different tickers and timeframes at once.
🔶 USAGE
This indicator displays swing structure data from up to 6 unique tickers or timeframes; Each graph represents the current swing structure retrieved from the requested chart/s.
Each swing graph displays the current live swing point positioning relative to the previous swing points. By analyzing the different formations, patterns can more easily be recognized and found across multiple tickers or timeframes at once.
This indicator serves as a nifty tool for confluence recognition, whether that's confluence throughout market tickers, or confluence through higher timeframes on the same ticker.
Alternatively, viewing the relative positioning of each swing point to each other, should give a clearer idea when higher lows or lower highs are formed. This can potentially indicate a newly forming trend, as well as serving as a warning to watch for breakouts.
The swing length can be changed to align with each individual's strategy, as well as a display look back can be adjusted to show more or less swing points at one time.
The display is fairly customizable, it is not fixed to 6 symbols at all times and can be minimized to only display the number of symbols needed; Additionally, the display can be set to vertical mode or horizontal(default) to utilize as needed.
Note: Hover over the swing point in the dashboard to get a readout of the exact price level of the swing point.
🔶 SETTINGS
Swing Length: Set the swing length for the structure calculations.
Swing Display Lookback: Sets the number of swing points (Pairs) to display in each Swing Graph display.
Symbols: Sets the Timeframe and Symbol for each Swing Graph.
Vertical Display: Display the Swing Graphs up and down, rather than side to side.
Scaling Factor: Scales the entire indicator up or down, to fit your needs.
Indicator
Indicator
Crypto Arbitrage Scanner [CryptoSea]Crypto Arbitrage Scanner
The Crypto Arbitrage Scanner is an advanced tool designed to help traders identify arbitrage opportunities across multiple cryptocurrency exchanges. With the ability to compare prices, volumes, and differences in price, this indicator is a must-have for any trader seeking to exploit cross-exchange inefficiencies in real time.
Key Features
Multi-Exchange Price and Volume Comparison: Tracks data from multiple major cryptocurrency exchanges, including BINANCE, COINBASE, KUCOIN, and others, allowing traders to easily compare prices and volume across platforms.
Customizable Difference Metrics: Allows users to toggle between displaying price differences in percentages or absolute dollar values, depending on the preferred metric for arbitrage analysis.
Sorting and Filtering Options: Includes user-defined sorting options to order the data by Price, Volume, or Difference, helping to prioritize potential arbitrage opportunities based on the trader's chosen criteria.
Difference and Volume Thresholds: Users can specify the minimum volume and price difference thresholds, ensuring that only significant arbitrage opportunities are highlighted.
Real-Time Alerts: Built-in alert conditions notify users when arbitrage opportunities exceed their defined price difference thresholds, helping traders respond instantly to market movements.
The Crypto Arb Scanner displays a table of prices, volumes, and price differences across selected exchanges. Each exchange is listed along with the current close price, volume, and the difference in price compared to the average price across all exchanges. Highlighting is used to indicate significant differences that may present arbitrage opportunities.
In the example below, we can see a highlighted opportunity in green showing that the price is below the user inputed thresold.
How it Works
Data Collection: Gathers real-time volume and price data from various exchanges using a streamlined process, allowing for a detailed comparison.
Average Price Calculation: Computes the average price across all valid exchanges to identify where price discrepancies occur, providing a clear picture of arbitrage potential.
Sorting Mechanism: Utilizes custom sorting based on user preferences, making it easy to quickly analyze and identify key opportunities.
Dynamic Highlighting and Alerts: Price differences that exceed user-defined thresholds are highlighted, and alerts can be triggered for these arbitrage opportunities, allowing for a timely response.
Application
Arbitrage Trading: The Crypto Arb Scanner is ideal for traders looking to exploit price differences across exchanges, enabling efficient arbitrage opportunities.
Market Efficiency Analysis: Offers insights into the consistency of prices across exchanges, which can help gauge the efficiency and liquidity of the markets being traded.
Customizable Alerts: Set alerts based on price differences or volume, allowing traders to stay informed about changes without constantly monitoring the markets.
The Crypto Arbitrage Scanner is a powerful addition to any trader's toolkit, offering comprehensive features to detect arbitrage opportunities with confidence. With real-time monitoring, customizable metrics, and a user-friendly interface, this tool allows traders to make informed decisions and capitalize on inefficiencies across exchanges. Indicator
EMA Distance Scanner with Multi-TimeframesThis indicator was created for personal use because I wanted to see, within the five-minute time frame, what is happening with the 15-minute, 1 hour, and 4 hour EMA9 and EMA200.
When the number is green, we are above the EMA value, and when it is red, we are below it. This also helps to get a clearer picture of the short- and long-term trends. When the number is close, within 0.00-0.01%, it turns blue, indicating a potential support level. You can also change the EMA values to your preference in the settings.
Hopefully, this will be helpful for you as well. Indicator
