Indicator
Indicator
Indicator
Indicator
Dynamic Volatility Filter [QuantAlgo]🟢 Overview
Dynamic Volatility Filter is a trend-following indicator built on an adaptive volatility threshold rather than fixed bands or moving average crossovers. It quantifies the realized volatility of recent price movement to establish a dynamic noise floor that price must overcome before the line responds, anchoring a filtered trend line that only shifts when a directional move exceeds the prevailing volatility regime, helping traders separate statistically significant trend change from noise-driven fluctuation across every timeframe and market.
🟢 How It Works
The foundation of the indicator is a rolling volatility estimate derived from the Average True Range over a configurable lookback window, scaled by a noise multiplier to produce the threshold used in all line logic:
threshold = ta.atr(lookback) * noise_mult
This threshold functions as a deviation barrier the line will not cross until price movement breaches it. On each bar the filter measures the displacement between price and the current line position, and only when that displacement exceeds the volatility threshold does the line update:
float diff = src - dvf_line
if math.abs(diff) > threshold
dvf_line := dvf_line + diff * snap_speed
The line remains stationary through movement that falls within the volatility envelope and only commits once displacement clears the threshold. Rather than converging directly onto price, the line advances by a fraction of the residual distance governed by the catch-up coefficient, producing a damped response instead of an instantaneous one. Lower catch-up values introduce deliberate lag that requires a move to persist before the line follows, while higher values tighten the track to price.
Direction state is derived from the line's own first difference, comparing its current position against the prior bar:
if dvf_line > dvf_line
trend_dir := 1
else if dvf_line < dvf_line
trend_dir := -1
Because the line holds flat whenever displacement stays inside the threshold, those periods register no direction change. With Show Neutral enabled the state resets to neutral during these pauses, and with it disabled the line retains its last directional reading until the next threshold breach.
🟢 Signal Interpretation
▶ Bullish Trend (Green): When the filter line registers positive displacement against its prior position, the indicator enters bullish mode with green coloring applied across the line, gradient fill, and volatility bands. This state persists through pullbacks contained within the threshold, since direction only updates when the line moves. The transition into green marks a potential long/buy opportunity, with pullbacks toward the line during an established bullish reading offering potential continuation entries.
▶ Bearish Trend (Red): When the filter line registers negative displacement against its prior position, the indicator enters bearish mode with red coloring across all visual elements. The reading holds bearish until price clears the volatility threshold in the opposite direction. The transition into red marks a potential short/sell opportunity, with rallies back toward the line during an established bearish reading offering potential continuation entries on the downside.
▶ Neutral (Gray): When Show Neutral is enabled, the line and fills turn gray during flat stretches where price stays inside the threshold and the line holds still. This state signals an absence of confirmed direction and is best treated as a stand-aside condition, where waiting for the line to commit back to green or red avoids entering during indecisive, range-bound conditions.
🟢 Features
▶ Preconfigured Presets: Three parameter sets cover different trading approaches. "Default" targets swing trading on 4-hour and daily charts with a balanced threshold that filters moderate noise while staying responsive to genuine regime shifts. "Fast Response" lowers the volatility barrier and shortens the lookback for intraday charts where the line needs to adapt to shorter-duration moves. "Smooth Trend" raises the threshold and slows the catch-up for position trading on daily and weekly timeframes, where the cost of a false flip exceeds the cost of a delayed one. Selecting a preset overrides the individual noise, period, and catch-up inputs.
▶ Built-in Alerts: Three alert conditions cover all directional states. "Bullish Trend Signal" fires on the bar where the trend confirms bullish. "Bearish Trend Signal" fires on the bar where it confirms bearish. "Any Trend Change" combines both into a single condition for traders who want a unified notification regardless of direction.
▶ Visual Customization: Six color presets (Classic, Aqua, Cosmic, Cyber, Neon, and Custom) apply coordinated bullish and bearish color schemes across the line, gradient fill, volatility bands, and optional bar and background coloring. The volatility bands plot one threshold above and below the line to frame the deviation envelope price must breach, and can be hidden for a clean line-only view. Bar coloring tints price candles with the active trend color at a configurable transparency level, and background coloring extends the directional tint across the full chart pane. Both are disabled by default and controlled independently.
*Recommendation: Layer the Dynamic Volatility Filter with complementary analysis rather than treating it as a standalone decision tool. Combine direction changes with volume context, since expanding volume on a flip bar suggests the move has broader participation behind it, and read transitions against key structural levels, as a flip occurring near major support or resistance carries more weight than one in open space. Pairing this script with volume, open interest, CVD, market structure, and mean reversion indicators from our QuantAlgo toolkit can further validate directional bias before entry. Indicator
Pymander's EZ Momentum MatrixPymander's EZ Momentum Matrix—your new go-to tool for catching the pulse of the market!
I built this indicator because I know how frustrating it is to feel like you're "chasing" a move or getting caught in choppy fakeouts. This tool is designed to act like your trading GPS, helping you cut through the noise and align yourself with the high-probability trend instantly.
How it works:
Under the hood, we’ve combined two powerful components into one seamless visual experience:
The Momentum Wave: An ultra-sensitive oscillator that reacts to price shifts almost instantly. It changes color based on its slope—green when rising and red when falling—so you know exactly when momentum is shifting, even before a zero-cross.
The Trend Matrix: This is the heatmap bar at the bottom. It uses low-lag DEMA (Double EMA) logic and a 50-period trend filter to act as your "gatekeeper." It ensures you only take long signals when the macro trend is actually in your favor.
What makes it unique?
Confluence Diamonds: When the fast momentum wave and the filtered Trend Matrix align perfectly, a diamond signal appears on the wave. These are your "stars aligned" moments for high-probability entries.
Extreme Turn Signals: Small circles appear when the oscillator curls back in overbought or oversold zones, giving scalpers an early warning for potential micro-reversals.
The Glow: We polished the visuals with a slight aura glow effect and smooth gradients. Not only does it help you see signals more clearly, but your charts will look amazing while you're trading!
Why you’ll love it:
It’s all about clarity. By using the EZ Momentum Matrix, you stop guessing and start following. It simplifies complex trend and momentum data into a color-coded system that makes trade decisions faster and much more disciplined.
We’d love to hear how this is working for your specific strategy, so please reach out with any feedback or suggestions!
Wishing you tons of luck out there, stay disciplined, and here’s to many green days ahead!
-Pymander
Indicator
Ultimate Scalping Tool 2.0 [BullByte]Ultimate Scalping Tool 2.0
What This Tool Was Built For
UST 2.0 is a flux oscillator designed to help scalpers and intraday traders read market state more clearly. It sits in the lower pane of your chart and shows you whether the current market environment is trending cleanly, compressing before a move, chopping in a range, or losing momentum after an extension.
The core idea is simple. Four internal measurements feed into one oscillator. Each measurement looks at a different part of market behavior: how cleanly price is traveling, whether momentum is meaningful given current volatility, what volatility itself is doing, and whether participation is building or fading. These four readings are weighted differently depending on what the market is doing right now. During a trend, directional measurements get more weight. During compression, volatility and flow get more weight. During a range, momentum and participation matter most.
The output is displayed as a candle on the oscillator pane. The candle color, the regime label, the confluence histogram, and the structural overlays all update on every bar to give you a current read on conditions. This is not a signal generator. It is a state monitor. You still need to decide when and how to act.
---
Why Version 2.0 Exists Separately
Ultimate Scalping Tool Version 1.0 is still published. It uses a different internal structure and outputs labeled signals like Strong Buy and Pullback Sell. Many traders built their workflows around that approach, and changing it would have broken their setups. Keeping both versions available lets traders choose the workflow that fits how they trade.
Version 2.0 shifts away from signal labels toward market state classification. The four internal measurements are different. The adaptive weighting engine is different. The visual output is different. The confluence scoring, multi-timeframe context, and oscillator-native zones are all new. The two scripts serve related but different purposes, which is why they exist side by side rather than as an update that replaces the first one.
The continuity between them is the Flux State Candle concept. That visualization approach worked well enough in version 1.0 that it became the foundation for how version 2.0 displays its output.
---
One Engine, Not a Collection of Indicators
This is worth addressing directly because it is easy to look at a script that mentions RSI, ATR, and Bollinger Bands and assume it is just wrapping existing indicators together. That is not what is happening here.
RSI does not appear on the chart. ATR does not appear on the chart. Bollinger Bands do not appear on the chart. None of the four internal measurements produce a visible output of their own. They are inputs into a calculation that produces one single output: the Flux Oscillator value. That value is then displayed as a candle.
The reason RSI is used inside the Adaptive Momentum subsystem is not because RSI is a good indicator to show. It is because RSI gives a normalized momentum reading on a known scale, which makes it easier to combine mathematically with the other three measurements on equal footing. The period is not fixed. It changes at runtime based on current volatility, which standard RSI does not do. The output is scaled before it enters the weighting engine. What comes out the other side is not RSI. It is one weighted component of a composite reading.
The same logic applies to ATR inside the Volatility Regime subsystem and to bar-structure calculations inside the Flow Proxy. These are raw materials, not finished products. They feed a pipeline that produces something different from any of them individually.
The four subsystems were chosen because they answer four different questions: is price traveling efficiently, is momentum meaningful right now, is volatility expanding or contracting, and is participation building or fading. Those four questions together give a more complete picture of market state than any one of them alone. That is the design intent, and it is why the adaptive weighting engine matters. Different market conditions make different questions more relevant. The engine adjusts accordingly.
---
The Four Internal Measurements
The oscillator is built on four subsystems. Each one measures something the others do not.
Directional Efficiency looks at how cleanly price is moving. A market that travels 100 points in a straight line has high efficiency. A market that gyrates up and down while netting only 20 points forward has low efficiency. This helps you see whether a trending move is organized or grinding. For scalping, clean efficient moves are easier to work with than choppy grinders.
Adaptive Momentum uses RSI internally but selects the period based on current volatility. When volatility is high, it uses a shorter period to stay responsive. When volatility is low, it uses a longer period to reduce noise. The reading is then adjusted so that momentum in a high-volatility environment is not overstated and momentum in a quiet environment is not understated.
Volatility Regime combines three volatility signals: where ATR sits within its recent range, whether short-window ATR is rising or falling relative to long-window ATR, and where Bollinger Band width sits within its range. Positive values mean volatility is expanding. Negative values mean it is contracting. Deep negative values below -0.20 usually mean the market is compressing hard, which often precedes directional expansion.
Flow Proxy estimates directional participation from bar structure and relative volume. It approximates buying versus selling pressure using close position within range, price velocity weighted by volume, and absorption detection for high-volume bars with small bodies. This is not true order flow because that requires tick data. It is a proxy built from OHLCV data, and it behaves like one.
These four readings are combined using weights that shift based on what the market is doing. You get one oscillator value per bar. That value is displayed as a candle, classified into a regime state, scored for confluence, and optionally blended with a higher-timeframe context reading.
---
How the Regime Classification Works
The script classifies every bar into one of four states: TREND UP, TREND DOWN, COIL, or RANGE.
When efficiency is strong, momentum is aligned, and volatility is not compressing, the regime is TREND . When efficiency is low, volatility is compressing hard, and participation is building, the regime is COIL . When none of those conditions are met, the regime is RANGE .
The regime label appears near the bottom of the pane on the last bar. The background tint changes subtly based on the regime. This classification affects how the four measurements are weighted before they combine into the oscillator value.
---
The Confluence Histogram
The gold histogram at the bottom of the pane shows the confluence score from 0 to 100. The score measures how aligned six independent factors are: regime matches oscillator direction, oscillator magnitude is strong, the four internal measurements agree on direction, the higher timeframe aligns with the current one, flow quality is clean without absorption, and volatility context supports the current structure.
A low score means conditions are mixed or weak. A high score means the environment is organized and several factors are confirming the same picture. The histogram grows taller as the score rises. When the bar is short and dark amber, confluence is low. When the bar is tall and bright gold, confluence is high.
This is useful for filtering. If you are watching for a breakout from a consolidation and confluence is at 80, the setup has more environmental support than the same breakout pattern with confluence at 30. The score does not tell you to enter or exit. It tells you whether the broader conditions are organized or scattered.
---
How to Read the Flux State Candle
The candle is built from the oscillator value, not from price. Green candles mean the oscillator is above its moving average. Red candles mean it is below. Violet candles mean a volume absorption bar was detected , which is a specific condition where high volume produced a small-bodied bar.
The border brightness increases when the oscillator is further from its moving average. A bright border means conviction. A dim border means the reading is close to neutral.
When the candle is consistently green and the cloud below it is stacked with the fast line above the slow line, the oscillator trend is internally aligned in a bullish direction. When the candle flips to red and the cloud inverts, the oscillator trend is bearish. When the cloud is mixed and candles are alternating color frequently, the oscillator is in a transition or range state.
---
Oscillator-Native Zones and Trendlines
The red and green-cyan lines you see on the oscillator pane are support and resistance zones, but they are zones on the oscillator itself, not on price. They mark levels where the oscillator has repeatedly turned. These are built from confirmed pivot highs and lows.
When the oscillator approaches a red resistance zone that has been touched five times, you know the flux reading is approaching a level where it has reversed before. If price is near a key price level at the same time and confluence is high, that convergence can add weight to a reversal setup you are already watching on the price chart.
The cyan and orange trendlines work the same way. They connect confirmed swing points on the oscillator. A cyan ascending trendline from oscillator swing lows tells you the oscillator structure is building higher. An orange descending trendline from oscillator swing highs tells you the oscillator structure is weakening lower. These lines appear after the swing points are confirmed, not before.
All of these structural tools use confirmed pivot logic, which means they appear a few bars after the actual turning point. This is intentional. Unconfirmed pivots fail frequently. Waiting for confirmation removes most of the false starts. When you see a zone or trendline appear or update, it is showing you structure that has been validated by subsequent price action, not structure that might form.
Reading the oscillator structure in practice looks like this.
Two red resistance lines sitting around +25 and +30 on the oscillator, both labelled R MAJO R, tell you that every time flux has pushed up into that band it has been rejected. That ceiling has held six and seven touches respectively. Until flux breaks and closes above those two red lines, the upside is capped on the oscillator. Below there is an S ZONE 3T sitting near -15. That is the floor that has caught the most recent bounce.
On the trendline side, three cyan ascending lines rising from the lower left are bull trendlines built from oscillator swing lows. The lowest at TL 52% is the broadest support. The middle at TL 66% is tighter. The top at TL 74% is the steepest and most recent. If flux bounces off the TL 74% line, that is the most important touch right now. An orange descending line pressing down from above is the bear trendline. When flux is squeezed between a rising cyan trendline and a falling orange trendline, that is a classic wedge compression on the oscillator and it often precedes a directional expansion once one side breaks.
---
Divergence Labels
When the oscillator and price stop agreeing on direction, the divergence engine marks it on the chart.
There are four labels. Each one means something specific.
DIV+ appears below the oscillator at a swing low. It means price made a lower low on the price chart, but the oscillator made a higher low at the same point. The downward move is losing internal support. This is regular bullish divergence and it tends to appear near potential exhaustion of a downward move.
DIV- appears above the oscillator at a swing high. It means price made a higher high on the price chart, but the oscillator made a lower high at the same point. The upward move is losing internal support. This is regular bearish divergence and it tends to appear near potential exhaustion of an upward move.
H+ appears as a small circle at a swing low. It means price made a higher low, a normal pullback in an uptrend, but the oscillator made a lower low. The oscillator dipped deeper than price did. This is hidden bullish divergence. It often appears mid-trend during a pullback and can suggest the trend is likely to continue.
H- appears as a small circle at a swing high. It means price made a lower high, a normal pullback in a downtrend, but the oscillator made a higher high. The oscillator pushed higher than price did. This is hidden bearish divergence. It often appears mid-trend during a bounce and can suggest the downtrend is likely to continue.
All four labels appear a few bars after the actual swing point because the pivot must be confirmed by subsequent bars before the label is placed. When you see a label appear, it is sitting on a past bar where the swing has already been validated. Nothing is marked in advance. The label was not there before, and it will not move or disappear after it appears.
---
How This Fits Into a Price Action Workflow
Here is one example of how the tool can layer into a real trade setup.
You are watching a 5-minute chart. Price has been consolidating in a tight range for the last hour. On the main price chart, you see a clean horizontal level being tested multiple times. That is your setup area. You are waiting for a breakout.
You glance at the oscillator pane. The regime label says COIL. The flux candles are small and alternating color near the zero line. The confluence histogram is rising and just reached 65. VRI in the dashboard shows -0.25, which is hard compression. COFP is positive and building.
This tells you the oscillator agrees with what you are seeing on price: the market is compressing. Volatility is contracting. Participation is starting to build in one direction. Confluence is improving, meaning the internal measurements are starting to agree.
You wait. Price breaks the consolidation upward on increased volume. At the same moment, the flux candle turns bright green with a strong border. The regime label flips to TREND UP. The confluence histogram jumps to 78. The cloud stacks bullish. The dashboard shows all four internal measurements turned positive.
You already know where your entry is from the price chart. The oscillator is not telling you to buy. The oscillator is telling you the conditions support the breakout you are watching. Efficiency turned positive, meaning price is traveling cleanly. Momentum confirmed. Volatility started expanding. Flow is directional. The environment is organized.
You take the trade based on your price-action plan. You manage the trade from price structure. But while you are in the trade, you glance at the oscillator occasionally. If the flux candle stays green and confluence stays high, conditions remain supportive. If the candle turns red and confluence drops, you tighten your management because the internal read is weakening.
A real chart example of what COIL into expansion looks like: Gold on the 3-minute chart shows a full cycle, a base building through the early session, a strong impulsive rally, then a controlled rollover where the oscillator hugs just above zero with the regime label reading COIL. The oscillator has compressed hard after the post-peak selloff, and the cyan ascending bull trendline is now acting as the floor of the oscillator structure. This is the compression phase the tool is designed to identify before the next directional move develops.
---
What This Tool Does Not Do
This script does not tell you where to enter or exit. It does not produce buy and sell signals. The flux candle, the regime label, the confluence score, and the structural overlays all describe conditions, not actions.
The zones and trendlines on the oscillator are not price levels. They are oscillator levels. They tell you where the oscillator has turned before, not where price will turn next.
The HTF oscillator is a simplified version of the current-timeframe calculation. It uses fixed parameters and reduced components for cross-timeframe stability. It is useful for context, but it is not identical to the full engine running on the higher timeframe.
Pivot-based elements appear after confirmation, which means they lag the actual pivot by the confirmation period . This is intentional. The tradeoff is fewer false signals at the cost of slightly delayed information.
Confluence measures environmental alignment, not trade direction. A high score means conditions are organized. A low score means they are not. Neither tells you to buy or sell.
---
Recommended Timeframes and Settings
This tool works best on intraday timeframes from 1 minute to 1 hour. For active scalping, use 1-minute to 5-minute charts with the HTF set to 15 minutes. For slightly slower intraday swings, use 15-minute to 60-minute charts with the HTF set to 4 hours or daily.
The multi-timeframe panel should show timeframes that are meaningfully different from your chart timeframe. If you are on 5 minutes, set the panel to 15 minutes, 60 minutes, and 240 minutes. If the panel shows timeframes that are too close together, the readings will be nearly identical and provide no additional information.
The default settings are balanced for general use. If the oscillator is too noisy, increase the DER length or the AMVS base period. If the oscillator is too slow, decrease them. If zones and trendlines are appearing too frequently, increase the minimum touch requirements. If they are not appearing enough, decrease them.
The adaptive weighting setting should generally stay on unless you have a specific reason to use fixed manual weights. The adaptive behavior is part of how the tool adjusts to different market conditions.
---
Understanding the Limitations
No indicator can predict the future . This tool shows you the current state of several internal measurements and how aligned they are. It does not know what will happen next.
Markets can shift from organized to chaotic in seconds. A high confluence reading can drop to low confluence on the next bar if one of the internal measurements changes direction. That is normal. The tool is reactive, not predictive .
The S/R zones and trendlines are based on past oscillator behavior. Just because the oscillator turned at a zone five times before does not mean it will turn there again. Past structure informs context but does not guarantee repetition.
Divergence suggests momentum quality is changing. It does not guarantee reversal. Many divergences resolve with price continuing in the original direction after a brief pause or consolidation.
Volume absorption detection is based on relative volume and body size. It identifies a specific bar condition but does not tell you how the market will respond to that condition.
---
A Note on Expectations
This script was built to give scalpers and intraday traders more clarity about market state. It was not built to replace chart reading, price action analysis, or trade management discipline.
If you are looking for a tool that tells you exactly when to enter and exit, this is not that tool. If you are looking for a tool that helps you see whether the current environment is organized or messy, whether internal measurements are aligned or conflicting, and whether higher-timeframe context supports or opposes your intended direction, this can help with that.
The best results come when the oscillator is used as confirmation for setups you are already identifying from price structure, not as a standalone signal generator. The flux candle, regime label, confluence score, and structural overlays are all context layers. They work best when layered on top of solid price action principles, not in place of them.
---
Disclaimer
This script is published for educational purposes. Trading involves substantial risk of loss. No indicator or tool can eliminate that risk. Past performance of any indicator does not predict future results. The author is not responsible for any trading decisions made using this script. Always apply your own risk management, test thoroughly on demo or simulation before live use, and never risk more than you can afford to lose.
- BullByte Indicator
Money Flow Dynamics Forecaster 3D [TechnicalZen]The art of swimming with the whales 🐳
What is this?
MFDF 3D provides a topological three-dimensional mapping of current market drivers and potential future trajectories.
is a visual analysis indicator that compresses several ideas into one spatial model: recent history, layer depth, directional amplitude, and short-term forward continuation.
Visually a three-dimensional momentum ocean where two independent systems — Money Flow (MFI-driven) and Price Current (Hull-VWMA-driven) — are rendered as layered terrains inside a bounded 3D box. Past history forms a waved carpet; the future is slope-extrapolated with exponential decay. When both systems agree, whales appear — 🐳 when the tide is rising, 🐋 when it's falling.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The Metaphor — Swimming With the Whales
Markets do not move on their own. They move because whales move them — large institutional players whose positions are too big to enter or exit in a single candle. A pension fund building a position, a market maker hedging a block, a macro desk rotating out of a sector — none of them can step in without leaving ripples.
When whales move, they leave two distinct footprints in the tape:
Money Flow — volume concentrated at favorable prices. You don't see it as a price change at first; you see it as buying pressure accumulating . MFI, weighted by volume, detects this before it becomes price.
Price Current — the volume-weighted tide. Once enough pressure accumulates, price itself has to drift in the direction the whale is pushing. Hull-VWMA slope tracks this.
Retail traders typically see only the second footprint — price moving. By then the whale is already positioned. Money Flow shows you the first footprint before price has to respond, which is why MFI leads VWMA in this indicator.
The goal is not to catch the whale — you can't. The goal is to see the ripples early enough to swim with the tide instead of against it. That's what "swimming with the whales" means: recognizing the institutional current and aligning with it, instead of fading it and getting dragged under.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The Fluid Dynamics
Every oscillator you've used is a single line. MFI is one line. RSI is one line. MACD is two lines and a histogram. They're flat because they pick one smoothing length and commit to it. You see where momentum is; you don't see its shape .
This indicator draws a family of 20 Hull-smoothed Money Flow variants simultaneously , each using a different HMA length (3, 4, 5, 6, 8, 10, 12, 14, 17, 20, 23, 26, 30, 34, 38, 42, 46, 50, 55, 60). Short HMAs foam at the surface, reacting instantly. Long HMAs move like glaciers. Stitched together across time and depth, they form a genuine fluid — ripples, waves, surges, cascades, turning-tides — not a line, a current.
The Hull-VWMA carpet is the same idea on a second dimension: 12 depth layers, each the 2-bar percentage slope of a Hull-smoothed Volume-Weighted Moving Average. This is your price current : where the volume-weighted tide is moving, independent of momentum.
Two independent Wireframes. Shared 3D box. When they agree, the whale arrives.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The 3D Box
Axes:
X — time (past bars left of center, forecast right)
Y — amplitude, signed ±100 (positive = bullish, negative = bearish)
Z — depth layer (each HMA length sits at a different depth)
Reference planes:
The translucent Y=0 plane is momentum neutrality — where MFI = 50, VWMA slope = 0. Wireframes rise above it when bullish, sink below when bearish.
The X=0 plane marks the current candle. Everything to the left is memory; everything to the right is forecast.
Nine labeled points (A–I) on the Y=0 plane let you orient instantly.
Riders:
🏄♂ — rides the leading edge of the Money Flow terrain (HMA 20 middle layer)
⛵ — rides the Price Current leading edge (Hull-VWMA slope in Hull-VWMA mode, signed-ADX HMA in ADX mode)
🐳 — breaches at the forecast end when both slopes are bullish
🐋 — dives at the forecast end when both slopes are bearish
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Color Aesthetics
The color choices are not random — they carry semantic weight.
Money Flow terrain uses traffic-light logic:
Yellow at neutral (v ≈ 0)
Yellow → Green as bullish momentum grows
Yellow → Red as bearish momentum grows
Solid green above +50, solid red below −50
Hull-VWMA carpet uses a water palette:
Light blue at neutrality — still water
Light blue → Cyan as money flows in
Light blue → Maroon as money flows out
Transparency encodes magnitude: weak signals fade to nearly invisible, strong signals saturate. You read intensity at a glance, without staring at a number.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The Forecast
Past Wireframes tell you where you've been. The right half of the box projects where you're heading .
Each of the 20 + 12 = 32 HMA layers gets slope-extrapolated into the future:
future = current + slope · t · decay^t
slope is computed from the last N bars (default 4)
decay (default 0.92) is the honesty multiplier — the further out you go, the less confident the projection, so the slope contribution fades
All forecast values clamp to ±100 so they never escape the box
Rendered as translucent ghost terrain in the forecast half, colored with the same palette as the past but softer. You see the shape of projected momentum , not a point estimate.
When both the Money Flow middle-layer slope AND the Hull-VWMA middle-layer slope agree on direction, a whale surfaces at the forecast's far edge. This is confluence — two independent systems pointing the same way. That's the signal worth swimming toward.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The Two Riders — Surfer vs Sailboat
The two emojis on the present-boundary are not decoration. They represent two fundamentally different kinds of signal — and understanding the difference is the whole game.
🏄♂ The Surfer — rides the Money Flow terrain. Surfers feel the impulse : every short wave, every gust of buying or selling pressure, every sudden shift in volume-weighted momentum. Surfers are fast, reactive, sensitive. What the surfer tells you: "the wind just picked up" — or "it just died." This is the quick, leading signal.
⛵ The Sailboat — rides the Price Current carpet. Sailboats don't react to gusts; they set their course by the trend — the steady directional pressure of the volume-weighted tide pushing the boat one way or the other. Slow, deliberate, confirmed. What the sailboat tells you: "the current is actually carrying us this way now." This is the confirming, lagging signal.
These are two different kinds of information, not two views of the same thing:
The surfer sees the impulse before it matures into committed direction.
The sailboat confirms that the impulse has turned into real directional displacement.
When both agree — surfer AND sailboat pointing the same way — momentum builds faster than either signal could account for alone. That agreement is the proof that big money isn't just testing the waters; they're actually moving them. That's when a whale surfaces.
Surfer alone = wind, no commitment yet. An impulse without confirmation — interesting but unconfirmed.
Sailboat alone = drift, no fresh push. A trend without new pressure — may be tired.
Surfer + Sailboat = whale. Both fresh impulse and committed direction. Institutional participation confirmed.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Reading the Whales — What They Mean For Decisions
A whale is not a liquidity-grab signal. It is a confluence signal: both independent systems have agreed on direction at the same time.
🐳 — Money Flow and Price Current are both rising. Buyers are accumulating AND getting filled at progressively higher prices. This is sustained pressure, not a stop-hunt or a single-bar spike.
🐋 — Both falling together. Selling pressure AND price giving ground in lockstep.
No whale — the two systems disagree, or both are flat. Low-conviction zone.
Decision framework
🐳 → align long, don't fade. This is a conviction trade, not a reversal bet. Big money is actually pushing the tape, so size up with the tide instead of against it.
🐋 → exit longs or consider shorting. Don't buy the dip blindly — the volume-weighted price is confirming the sellers, not fighting them.
No whale → stand aside, or scale out of existing positions. Wait for confluence before committing fresh risk.
The mental model: "is big money actually moving the tape right now, or just shuffling?" Whale = pushing. No whale = shuffling.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Helpful Tip — Money Flow Leads Price Current
How to Use It in Practice
The best way to use the indicator is to read it in layers. It is not a one-glance yes or no system. Its advantage comes from helping the user see whether a move has internal support, whether the structure is broadening or thinning, and whether the present slope still has credible continuation.
• Start with orientation: Keep the default camera first. Learn where the zero plane is, where present time sits, and how positive and negative terrain occupies the box.
• Read the momentum terrain first: Look for height, curvature, and continuity across layers. A broad aligned rise or fall is stronger than a single sharp spike on only the fast layers.
• Check the oscillator carpet next: In Hull-VWMA mode, ask whether price-current slope supports momentum. In ADX mode, ask whether directional trend strength is building under the move.
• Inspect the forecast half: Use the ghosted forward half as a continuation sketch, not as a promise. Flattening structure, decaying height, or diverging layers often matter more than the exact projected endpoint.
• Use the whale as confirmation, not as the whole trade: The whale is most useful when it appears after the terrain has already become coherent, not when the picture is still fragmented and noisy.
Practical setup profiles
Fast tape
Suggested mode: MFI + Hull-VWMA
What to emphasize: Steeper terrain changes and quicker second-signal response.
Reading style: Use for intraday pulse and immediate continuation checks.
Cleaner swing structure
Suggested mode: RSI + Hull-VWMA
What to emphasize: Broader curvature and less volume sensitivity.
Reading style: Use when the user wants smoother rhythm and cleaner layer alignment.
Trend-strength confirmation
Suggested mode: MFI or RSI + ADX
What to emphasize: Whether directional pressure is actually strengthening underneath the move.
Reading style: Use when momentum looks attractive but may be structurally weak.
In practice, the Money Flow terrain (yellow/green/red) turns before the Hull-VWMA carpet (cyan/blue/maroon) . Volume-driven accumulation and distribution show up in MFI first — price only has to move afterwards to reflect what already happened underneath.
What to watch for:
Momentum terrain flipping color while the carpet is still flat → early warning . A whale sighting may be forming but is not yet confirmed.
Carpet starting to tilt the same way → confirmation building . Slopes are aligning.
🐳 / 🐋 appears at the forecast edge → confluence . Both systems point the same way. Act.
Read the terrain first. Wait for the carpet to catch up. Act on the whale.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Why This Is Different
Traditional oscillators answer: "what is momentum doing right now?"
This indicator answers:
What is money flow doing across every smoothing horizon at once? — the 20-layer Wireframe shows the full shape of momentum, not a single slice
What is the volume-weighted price doing independently? — the Hull-VWMA carpet is a second, independent witness
What do they predict together? — slope-extrapolated forecasts fill the future half; confluence emojis mark conviction
How strong is the signal? — opacity, saturation, and emoji presence are all quantitative encodings
No threshold to wait for. No line to cross. The ocean tells you where you are — and the whales tell you where it's heading.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Best Used With Volume-Weighted Candles
Switch your PulseWire chart's bar type (top-left dropdown) to Volume Candles .
Here's why this matters: the Hull-VWMA layer is already volume-weighted mathematically. When the chart's candles are ALSO volume-weighted, every visible pixel speaks the same language — price, indicator terrain, and forecast are all reading the same volume-filtered reality.
Thin-volume wicks and gap-outs stop polluting the chart, so they stop polluting the forecast
🐳 / 🐋 confluence signals calibrate more cleanly because both the price action and the indicator see the same "what the volume actually cared about"
On plain OHLC candles the indicator still works — but low-liquidity price spikes can disagree with the terrain. On VWC they move in lockstep.
If you want one setup to remember: Volume Candles + this indicator + default settings . Swim with the whales.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Best Paired With Smart Candle Structures
This indicator answers one question: "Is big money flowing, and in which direction?" It does not answer: "At what price level should I enter, exit, or place my stop?"
For that you need structural context — the levels where the market has historically reacted. Smart Candle Structures (order blocks, fair value gaps, liquidity pools, break-of-structure / change-of-character zones) maps exactly those levels.
The two tools are complementary, not redundant:
Smart Candle Structures gives you WHERE — the structural level worth reacting at.
MFD Forecaster gives you WHETHER AND WHEN — is the flow actually supporting a reaction here, and is it committed enough to act on?
The ideal workflow:
Smart Candle Structures highlights a level worth watching (an unfilled order block, a liquidity sweep, a CHoCH break).
Price arrives at that level. You don't act yet.
Watch this indicator: is the surfer turning? Is the sailboat joining? Is a whale forming in the forecast half?
Structure + confluence = your trigger. Structure without confluence = low-conviction trap. Confluence without structure = direction without location.
Pair them and you have both legs of the trade: the right place, at the right moment, with conviction .
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PulseWire Chart Stretch — Feature, Not Bug
Pine drawings live in chart coordinates (bar_index × price), so they stretch with your chart. Most indicator authors fight this. We lean into it.
Horizontal zoom → bar spacing changes → the 3D box widens or tightens organically. Zoom in tight to inspect individual layer positions; zoom out to see broad wave cycles.
Pane height changes → vertical proportions adjust. Invisible ±50 anchor plots lock the Y range so the box never jumps when values move.
Emojis scale with the pane — surfers and whales always read clearly at any zoom.
The indicator breathes with your viewport . That's what a real 3D visualization should do in a chart environment. It's responsive by design, not despite itself.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Settings Overview
Core
Time Span — past bars rendered (default 15). Also the forecast horizon.
Momentum Source — MFI (volume-weighted, default) or RSI (pure price)
Momentum Length — 14 default
Rib Amplification — stretches the ribs vertically to fill the box
Oscillator (Hull-VWMA)
VWMA Length — default 30
HMA Length — default 20
Hull-VWMA Scale — amplifies the slope into ±100
Bull/Bear/Neutral Tint colors
Camera
Yaw — horizontal rotation (−180 to +180)
Pitch — vertical tilt (default 5° = eye-level)
Scale X / Y / Z — box proportions
Forecast
Slope Lookback — bars used to compute current slope (default 4)
Decay per Bar — how slope contribution fades into the future (default 0.92)
Display
Box Wireframe, Y=0 plane, Axis markers, Mesh wireframe, Grids (all togglable)
Show Emoji Markers — master toggle for all four emojis
Quick-Start Tips
Load with defaults.
Switch chart bar type to Volume Candles.
Watch for 🐳 and 🐋 — they're rare, by design. They mean confluence.
Read the color gradient — yellow is neutral, bright green / cyan is strong bull, red / maroon is strong bear.
Try yaw presets: 0 = front view, 45 = corner, 90 = side, 180 = back.
Lower time spans (10–15) for intraday, higher (25–40) for daily and weekly.
Money Flow leads Price Current. If the yellow/green/red terrain is already turning while the cyan/blue/maroon carpet is still flat, you're early — the whale hasn't confirmed yet, but it's forming.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Disclaimer
This indicator is a visualization and analytical tool. It is not financial advice, a trade recommendation, or a signal service.
The whale emojis, forecast terrain, and slope extrapolations are mathematical projections from past data. They describe what has been and what linear decay would suggest next — not what markets will actually do. Markets are non-linear and reflexive; forecasts can and will be wrong.
No indicator eliminates risk. Confluence signals reduce noise, they do not guarantee outcomes. Every trade can lose.
Past performance — of this tool, or of any setup you build with it — does not predict future results.
Use with your own risk management (position sizing, stop placement, portfolio exposure). The indicator has no awareness of your account, your instruments, or your time horizon.
Do your own research. Consider speaking to a licensed financial professional before making investment decisions, especially on leveraged or derivative instruments.
By using this indicator you accept that all trading decisions and their consequences are your own. The author assumes no liability for losses incurred through use of this tool.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The art of swimming with the whales.
— TechnicalZen
Indicator
Scalper Pro 3 Min GoldDesigned specifically for low-timeframe scalping (ideal for 1m and 3m charts, especially on XAUUSD/Gold), the Scalper Pro 3 Min Gold is an advanced market structure breakout indicator that filters out market noise to catch explosive momentum.
Instead of giving a signal at every minor high/low cross, this script uses strict logic to ensure you only enter high-probability setups. It automatically calculates your risk and visualizes the exact Entry, Stop Loss, and Take Profit zones directly on your chart.
Key Features:
Smart Structure Breakouts: Uses internal Pivot High/Low calculations to identify true Market Structure Shifts (MSS). Stop losses are dynamically placed at the most recent logical swing low/high, not just the previous candle wick.
Consolidation Filter (Anti-Chop): The indicator analyzes the recent ATR. It requires the price to be in a tight accumulation/consolidation zone before a breakout occurs. This keeps you out of choppy, sideways markets and fakeouts.
Cooldown System: Prevents overtrading. After a valid signal is fired, the indicator enters a customizable "cooldown" period where it ignores erratic back-to-back signals.
Auto Risk:Reward Projection: Instantly draws professional Stop Loss (Red) and Target (Teal) boxes with clean labels based on your selected R:R multiplier (Default is 1:2).
How to Use:
Apply to a 1-minute or 3-minute chart (Highly optimized for Gold).
Wait for the indicator to draw the Entry/Target boxes.
The Stop Loss is automatically placed at the safest structural pivot. Execute your trade and let the price run to the projected Teal target zone.
Fully customizable inputs allow you to adjust the R:R ratio, consolidation strictness, and cooldown length to fit your personal scalping strategy. Indicator
ML Trend Architect [TechnicalZen]ML Trend Architect
A regime visualization and forecasting engine that combines machine learning confidence scoring with curved 3D glass facades to map market structure and anticipate regime transitions in real-time.
What It Does
This indicator identifies directional regime changes using a dual-engine approach — an impulse momentum engine and a DX/ADX directional movement engine — then wraps them in curved 3D visual envelopes that show regime strength, direction, and conviction at a glance. Beyond detection, it actively forecasts regime quality by scoring each transition against historical analogs and projecting follow-through probability before the move fully develops.
How It Works
Regime Detection
Band-break events (flips, continuations, refreshes) drive regime transitions. Price breaking above the upper band triggers a bullish flip; below the lower band triggers bearish. The system requires confirmation bars and enforces cooldowns to prevent whipsaws.
Forecasting Engine
At each regime transition, the engine evaluates how likely the new regime is to follow through before the move has played out. It scores setup quality across multiple dimensions — anchor cluster positioning, momentum alignment, compression state, duration, excursion depth, and family coherence — to produce a forward-looking conviction percentage. When KNN Memory is active, it deepens this forecast by matching the current setup fingerprint against resolved historical analogs, asking: "of all similar setups in the past, what percentage actually followed through?" The result is a probabilistic forecast — not a reactive signal — displayed as a confidence label at the moment of regime change.
Forward Resolution and Accountability
Every forecast is tracked forward over a configurable evaluation window. The system monitors whether price held on the correct side of the anchor cluster and whether it expanded sufficiently. Forecasts that fail to materialize are marked with a rejection symbol — creating a visible track record of forecast accuracy directly on the chart. This closed-loop accountability distinguishes it from indicators that fire and forget.
Curved Glass Facades
Instead of flat rectangular boxes, regime segments are rendered as curved 3D envelopes using square-root decay from the band edges. The curves start wide at segment birth and taper naturally, creating organic shapes that reflect each regime's character — steep narrow curves for aggressive moves, wide gradual sweeps for grinding trends.
DX Heat Strip
A color-gradient ribbon flows along the curved walls showing directional conviction in real-time. Yellow indicates weak/choppy conditions; cyan indicates strong bullish momentum; magenta indicates strong bearish pressure. Bulls support from below, bears press from above.
4-Color Regime System
The regime uses a continuous gradient driven by ADX position and slope, producing four distinct states that blend smoothly:
- Teal: strong bullish momentum (ADX positive, rising)
- Orange: fading bullish momentum (ADX positive, falling)
- Light Green: fading bearish pressure (ADX negative, rising)
- Red: strong bearish pressure (ADX negative, falling)
Signal Leader Detection
The engine tracks which signal source — Impulse or DX — has been more accurate recently and who fires first. This is itself a forecast: it predicts which signal source you should weight more heavily in the current market regime. The dashboard displays the current leader with win rate and directional bias.
Connection Lines
Dashed lines connect same-direction hull phases across interruptions, drawing on highs (bear color) and lows (bull color). When the price connection slope diverges from the indicator slope, lines become solid and thicken — flagging potential divergence setups that often precede regime reversals.
The Forecasting Pipeline
Step 1: Context Assessment — Where is price relative to the 7-anchor cluster? Are anchors aligned (coherent) or scattered? Is the market compressed or extended?
Step 2: Trigger Quality — How decisive is the breakout bar? Body ratio, close location, force spread, and cluster clearance are scored.
Step 3: Regime Environment — ADX strength, relative volume, and ATR regime provide the macro backdrop.
Step 4: Analog Matching (KNN) — The current feature fingerprint is compared to historical setups. Nearest neighbors are found using normalized Manhattan distance across 5 feature dimensions. Their resolved outcomes (success/failure) are distance-weighted to produce a probability.
Step 5: Blended Forecast — Base score and KNN probability are blended (configurable weight) into a final conviction percentage.
Step 6: Forward Tracking — The forecast is monitored over the evaluation window. Hold ratio and expansion targets determine success or failure.
Step 7: Memory Update — Resolved outcomes feed back into the KNN memory bank, continuously improving forecast accuracy on the current instrument.
Theme Presets
Curved — Full curved glass facades with 3D depth, regime fills, and heat strip
Classic — Clean curved envelopes without 3D effects
Heat Strip — Minimal view showing only the DX heat ribbon, markers, and connection lines
Custom — Full manual control over all visual parameters
Key Settings
My Trade Style — Balanced (standard width), Conservative (wider bands), or Aggressive (tighter bands)
Regime Mode — Swing (4-color ADX gradient) or Scalp (2-state impulse-driven)
Mid Line View — Lead (mid sits opposite price as support/resistance) or Follow (mid tracks toward price)
KNN Memory — Enable adaptive learning from historical pattern outcomes
Confidence Threshold — Minimum confidence % required to display a forecast label
Theme Preset — Quick visual style switching
Dashboard
The dashboard displays: Signal Leader (with win rate and direction), ADX Trend, Regime state, Structure (zone from VWMA positioning), Conviction (dominant confidence with ML/base tag), Impulse direction, Volatility regime, Session status, Win Rates, and Mode.
How to Use
Watch the regime color for the macro direction — teal and orange are bullish states, green and red are bearish
Read the heat strip color for conviction strength — vivid colors mean strong directional movement, yellow means caution
Follow the connection lines for structural trend tracking — solid thick lines with diamonds flag divergence between price and momentum
Trust confidence labels above your threshold — higher % means the forecast matches historically successful patterns
Respect rejection markers (x) — they mark where a forecast failed to materialize
Check the Leader in the dashboard — trade with the signal source that has been more reliable recently
Enable KNN Memory for instruments you trade regularly — it improves forecast accuracy as it accumulates resolved outcomes
Technical Notes
Works on any instrument and timeframe
No repainting — all signals confirm on bar close
KNN memory is session-scoped and builds over time on the current instrument
3D rendering uses polylines (max 100) with configurable segment count
Confidence scoring uses a 7-anchor cluster consensus, not a single indicator
Forecasts are forward-resolved with visible accountability — every prediction is tracked and scored
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice and should not be used as the sole basis for any trading or investment decision. Past performance of any signal, pattern, or scoring system does not guarantee future results. All trading involves risk, including the potential loss of principal. The machine learning components learn from historical data on the current instrument and timeframe — their predictions reflect pattern similarity, not certainty. The term "forecast" refers to probabilistic scoring of setup quality based on historical analogs, not a guarantee of future price direction. Always conduct your own analysis, manage your risk appropriately, and consult a qualified financial advisor before making trading decisions. The developer assumes no liability for any losses incurred through the use of this tool.
Indicator
AI SuperTrend Strength Forecasting Engine [TraderZen]The question that matters most in real time: "How confident should I be in this setup right now?"
The ML Trend Strength Forecasting Engine was built to answer that question directly. Instead of drawing lines on a chart and leaving interpretation to the trader, it computes a numerical confidence score for every potential bull and bear setup as it forms. It evaluates the quality of the setup context, the strength of the trigger bar, the state of the broader market regime, and whether similar setups in the recent past actually worked. The output is a percentage — how likely is this signal to follow through.
The indicator does not generate buy or sell signals in the traditional sense. It provides a calibrated confidence reading that helps the trader decide whether to act, wait, or pass entirely.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Key Differences and Advantages
What KNN Predicts
Generally: "Will the trend direction be right?"
This Indicator: "Will this setup hold or expand?"
Training Labels
Generally: Past indicator directions (circular — predicting itself)
This Indicator: Actual price outcomes (self-validating — did the trade work?)
Signal Source
Generally: Single trend line or oscillator
This Indicator: 7-anchor cluster consensus (VWAP, VWMA, EMA, SMA, RMA, HMA, Donchian)
Features
Generally: RSI + MA deviation at multiple timeframes
This Indicator: Context + Trigger + Volume + ADX + Trend Distance — Kalman-filtered
Confidence Meaning
Generally: "How similar to past indicator wins"
This Indicator: "How likely to follow through based on setup quality + historical analogs"
Accountability
Generally: No rejection tracking, no performance feedback
This Indicator: Rejection markers on failed signals + live win rate dashboard
Adaptivity
Generally: Fixed normalization window, static thresholds
This Indicator: Adaptive ceilings, vol regime scaling, running stats, memory decay
How It Works
The engine runs five interconnected layers , each feeding into a final confidence score.
Layer 1 — The Anchor Cluster
Seven moving averages are computed simultaneously: VWAP, VWMA, EMA, SMA, RMA, HMA, and the Donchian midpoint. These are grouped into four families:
Institutional — VWAP and VWMA
Trend — EMA, SMA, RMA
Fast — HMA
Structural — Donchian midpoint
The high, low, and midpoint of this entire cluster define where the market's center of gravity sits. A bullish candidate is detected when price crosses above the cluster midpoint from below. A bearish candidate is detected when price crosses below from above. The crossing is the trigger event. Everything else evaluates the quality of that cross.
Layer 2 — Context Scoring
Before the cross happens, the engine has been watching:
How long price spent on the other side ( duration )
How far it traveled away from the cluster ( excursion )
How tightly the anchors are compressed ( compression )
How much slope agreement exists across anchor families ( coherence )
Where price sits relative to the cluster edges ( clearance )
These components combine into a context score that answers: "Was the setup that led to this cross a good one?"
Context scoring is weighted — side positioning and slope carry the most influence, followed by compression and clearance, with duration and excursion providing secondary confirmation.
Layer 3 — Trigger Scoring
The crossing bar itself is evaluated for quality. A strong trigger bar:
Has a solid body (not a doji)
Closes near the directional extreme (close near the high for bulls, near the low for bears)
Shows force momentum aligned in the right direction
Has meaningful distance from the cluster
Represents a genuine cross rather than a wick touch
Each dimension is scored and blended into a trigger score.
Layer 4 — Regime and Features
The broader environment is assessed through Kalman-filtered features : relative volume versus its baseline, relative ATR versus its baseline, ADX trend strength, and price distance from the trend moving average. These are smoothed to reduce noise while preserving directional shifts.
Volatility regime awareness scales key thresholds automatically. In low-volatility environments, the engine tightens its excursion and distance requirements. In high-volatility environments, it loosens them. This prevents the indicator from being too sensitive in calm markets and too restrictive in active ones.
Layer 5 — Adaptive Analog Memory (KNN)
This is the differentiator. Every time a candidate signal is generated, the engine stores its five feature values (context, trigger, volume, ADX, trend distance) along with what actually happened over the following evaluation window. Did price hold above the cluster? Did it expand meaningfully? The outcome is recorded as a success or failure.
When a new candidate appears, the engine searches its memory for the most similar historical setups using a k-nearest-neighbors algorithm. Key details:
Features are normalized to equal scales using running statistics
Older samples receive exponentially decaying weights so the memory adapts as market behavior shifts
The KNN prediction is blended with the base confidence score
The memory learns and improves as it accumulates data on the specific instrument and timeframe
The memory requires a warmup period. Until enough resolved candidates have been recorded, the engine relies solely on the base scoring.
Putting It Together
The final confidence score blends the base score (context, trigger, regime, trend alignment) with the KNN analog prediction. The result is displayed as a percentage for both the bull and bear side. When confidence exceeds the threshold and beats the opposite side by a directional edge, a signal label appears on the price chart.
If a signal later fails to hold or expand, a small rejection marker ("x") appears on the chart — providing direct visual accountability.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
How To Use It
Reading the Pane
The indicator occupies its own pane below the price chart. Five elements are displayed:
Ribbon (top bar) — shows current state by color:
Gray = idle, Yellow = watching bull, Purple = watching bear, Aqua = armed bull, Fuchsia = armed bear, Green = bull signal, Red = bear signal
Dominant confidence line (thicker) — tracks the higher of the two side scores. When it rises above the confidence threshold line, a signal is likely imminent.
Bull and bear confidence lines (thinner) — show each side independently. Watching these diverge helps anticipate which direction will win.
Bias line — oscillates around 50. Above 50 = bull dominant. Below 50 = bear dominant.
Reading the Chart Labels
Green label with % — bull signal fired with confidence above threshold
Red label with % — bear signal fired
Dimmed green "x" — a bull signal was rejected (failed to hold or expand)
Dimmed red "x" — a bear signal was rejected
Higher percentages indicate stronger setups. Every signal is eventually graded pass or fail.
Reading the Dashboard
The dashboard in the bottom-right corner shows:
Bull and bear signal counts and win rates
Memory status (warming up or active with sample counts)
Current volatility regime (low, normal, or high)
Session status and bar count
Context and trigger score breakdown
Family coherence percentage
Force momentum direction
The win rate is the most important dashboard metric. Above 60% = well-calibrated. Below 45% = thresholds may need adjustment.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Important Settings
Confidence Threshold (default: 65%)
The minimum confidence required for a signal label to appear. This is the primary sensitivity control . Lower = more signals with weaker setups. Higher = fewer, more selective signals.
Armed Threshold (default: 45%)
Minimum confidence for the ribbon to show an armed state (aqua/fuchsia). Acts as a pre-signal alert — when the ribbon transitions from watch to armed, a signal may be imminent.
Watch Threshold (default: 45%)
Minimum context score to enter watch mode (yellow/purple). Lower values start tracking setups earlier.
Directional Edge (default: 5.0)
Minimum gap between bull and bear confidence required for a signal. Prevents signals in ambiguous conditions where both sides score similarly.
Resolution Bars (default: 8)
How many bars after a signal the engine waits before grading it pass or fail. Shorter = more responsive grading. Longer = more forgiving.
Hold Outcome Ratio (default: 0.60)
Fraction of resolution bars price must stay on the correct side for a success grade. At 0.60 with 8 bars, price must hold for at least 5 of 8 bars.
Expansion Outcome Target (default: 1.00 ATR)
Minimum price expansion required for an alternative success grade. A signal can succeed by either holding position or expanding sufficiently .
Memory Decay Rate (default: 0.005)
How quickly older memory samples lose influence. Higher = more recency-biased. At default, recent samples carry roughly 2x the weight of samples from 140 bars ago.
History Size (default: 120)
Maximum resolved samples in analog memory. Larger = more context but more computation.
Session Settings
Configure to match the instrument's primary trading session. Default is 0930-1600 America/New_York (US equities and futures).
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
What This Indicator Is Not
It does not predict price direction. It evaluates setup quality and follow-through probability.
It does not replace risk management . A 75% confidence signal can and will fail. The rejection markers exist to make this visible.
It does not work equally on all instruments without adjustment. The adaptive mechanisms handle much of the calibration automatically, but the confidence threshold may need tuning. The dashboard win rate provides the feedback loop.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice, and it does not constitute a recommendation to buy, sell, or hold any financial instrument.
All trading involves risk. Past performance of any signal, scoring system, or pattern recognition mechanism does not guarantee future results. The confidence percentages represent a statistical assessment based on the scoring model and historical analogs available within the loaded chart data. They are not predictions and should not be treated as certainties.
The adaptive analog memory learns from the chart data currently loaded in PulseWire. Its effectiveness depends on having sufficient resolved samples, and its learned patterns may not generalize to future market conditions, different instruments, or different timeframes.
The win rate displayed in the dashboard reflects performance on the loaded chart history only and is subject to survivorship bias, lookback bias, and data limitations inherent to backtesting on historical bars.
No indicator, algorithm, or model can account for all market variables including liquidity events, news-driven gaps, exchange outages, or sudden regime changes. Traders should always use independent risk management, position sizing, and their own judgment before entering any trade.
By using this indicator, you acknowledge that you are solely responsible for your own trading decisions and that the authors accept no liability for any losses incurred.
Indicator
Indicator
Liquidity Sweep Rider Institutional HFT Grabber Liquidity Sweep Rider Strategy (Swing Pivot + Volume Filter)
Publication Description:
This is an open-source Pine Script v6 strategy that identifies potential liquidity sweep patterns around confirmed swing highs and lows.
It uses:
Pivot points (ta.pivothigh / ta.pivotlow) to mark historical swing levels where orders (such as stops or pending entries) often cluster.
A volume filter requiring above-average volume (SMA-based with multiplier) on the sweep candle to highlight stronger moves.
Classic sweep logic: price wicks beyond the level but closes back inside, suggesting a possible reversal after liquidity is taken.
Entry rules:
Long: after a downside sweep below a recent swing low (with volume condition).
Short: after an upside sweep above a recent swing high (with volume condition).
Features include:
Optional toggles to enable/disable long/short directions.
ATR-based stop-loss and take-profit (configurable multipliers and risk-reward ratio).
Visual plots for liquidity levels, entry signals, background highlights, and an info table.
Alert conditions for long/short triggers.
Important notes:
This is an educational/example script for backtesting and learning.
Past performance does not indicate future results. Trading involves significant risk of loss — use proper risk management and never risk more than you can afford to lose.
No guarantees of profitability are made. Always test thoroughly on demo accounts before live use.
Customize parameters (pivot lengths, volume multiplier, ATR settings) based on the instrument and timeframe you trade. Works on various markets/timeframes but performs differently depending on liquidity and volatility.
Feel free to fork/modify the code. Feedback and improvements are welcome!
(≈ 3–4 paragraphs, clear, educational, includes risk disclaimer, explains logic + usage without hype.) Strategy
Adaptive Regime Compass MovingAverage SuiteSummary in one paragraph
Regime Compass Adaptive MA Suite is a three speed adaptive moving average indicator for liquid markets on intraday through daily charts. It helps you act only when price position, MA stack structure, reliability, and higher timeframe context align. It is original because it fuses robust outlier handling with efficiency driven adaptive smoothing, then compresses multi timeframe confirmation into a single compact panel plus directional reliability shading.
Scope and intent
• Markets. Major FX pairs, index futures, large cap equities, liquid crypto, and liquid commodities
• Timeframes. One minute through daily
• Default demo used in the publication.SPY 1h
• Purpose. Provide a practical trend context layer that adapts to regime and reduces false confidence during chop by exposing a reliability score and multi timeframe agreement
• Limits. This is an indicator. It does not place orders and does not simulate fills
Originality and usefulness
This is not a mashup of standard MAs. It is a single adaptive engine expressed at three speeds, plus a reliability model and a multi timeframe state panel.
• Unique concept or fusion. Robust input conditioning plus efficiency ratio driven adaptive alpha plus a reliability score that requires both structure and strength, projected across three higher timeframes with a consensus read
• What failure mode it addresses. Single bar spikes that poison classic smoothers, and false trend impressions during low efficiency chop where fixed length MAs keep crossing
• Testability. All behaviors are controlled in Inputs and echoed in the table so users can see why the state is bullish, bearish, or mixed and tune accordingly
• Portable yardstick. Efficiency ratio is dimensionless, so it generalizes across symbols and tick sizes. Slope strength is normalized by recent average absolute slope to reduce symbol dependence
Method overview in plain language
Base measures
Return basis. The engine measures directionality with an efficiency ratio, defined as absolute net change over a window divided by the sum of absolute bar to bar changes over the same window. Values closer to 1 indicate directional movement. Values closer to 0 indicate noise.
Range basis. Optional robust clipping uses a rolling mean and a scaled mean absolute deviation of price around that mean to define a dynamic clamp band for extreme bars.
Components
• Robust Clip. Optional step that clamps extreme deviations of the input series so single spikes do not disproportionately shift the MA state. Use it on wick heavy markets or news driven sessions. Disable it if you want raw sensitivity.
• Adaptive Alpha Core. The smoothing rate adapts between a fast and slow anchor using the efficiency ratio. In directional regimes the MA accelerates. In noisy regimes it slows down.
• Base Length Shaping. A second light smoothing stage ties each line to its fast, medium, or slow horizon so the trio remains coherent instead of behaving like three unrelated formulas.
• Zero Lag Assist. Optional phase compensation that slightly pulls the line toward its recent direction to reduce lag. It is strongest on the fast line and tapered on medium and slow. Disable it if you prefer maximum stability in chop.
• Reliability Score. A composite confidence estimate built from medium efficiency, MA stack coherence, and normalized medium slope strength. It is designed as a gating variable, not as a prediction.
Fusion rule
The three lines are produced by the same adaptive engine with different base lengths. The adaptive alpha uses the efficiency ratio to interpolate between the fast and slow anchors, then squares the result to damp small changes, similar in spirit to classic adaptive averages but implemented as a coherent three speed suite. Reliability is a weighted composite of:
• medium efficiency as the directionality signal
• a stack coherence score that is true when Fast is above Medium and Medium is above Slow, or the symmetric bearish condition
• medium slope strength normalized by recent average absolute slope
Signal rule
This script does not print buy or sell markers. It provides context states.
• Bullish structure is present when Fast is above Medium and Medium is above Slow
• Bearish structure is present when Fast is below Medium and Medium is below Slow
• Reliable regime shading is shown only when reliability is at or above the threshold and structure is consistently bullish or bearish
• Higher timeframe Trend in the table is Up when higher timeframe close is above its higher timeframe Medium and the higher timeframe Medium slope is positive. Down is the symmetric condition. Otherwise it is Neutral
What you will see on the chart
• Three adaptive MA lines: Compass Fast, Compass Medium, Compass Slow
• Optional line coloring: green when close is above the line, red when close is below
• Optional background shading: green for reliable bullish structure, red for reliable bearish structure
• Compact higher timeframe panel in the top right
Table fields and quick reading guide
Table columns use short labels.
• TF. The timeframe used for the row
• TREND. Up, Down, or Neutral on that higher timeframe using close versus Medium plus Medium slope sign
• C VS MED. Whether the higher timeframe close is above or below its higher timeframe Medium
• STACK. Two relationships shown together: F>M or FS or M Indicator
Adaptive AI SuperTrend [AlgoPoint]🚀 Adaptive AI SuperTrend
Adaptive AI SuperTrend is a high-performance trading terminal that redefines trend-following by integrating Machine Learning (ML) principles with advanced market regime detection. Unlike static indicators, this system dynamically recalibrates its internal parameters to match the ever-changing volatility of the financial markets.
Equipped with a custom "Wizard Engine," it filters out market noise during consolidation and identifies high-probability trend continuation points, making it an essential tool for scalpers, day traders, and swing traders alike.
🧠 What Makes it "AI"?
While traditional indicators use fixed rules, Adaptive AI SuperTrend utilizes Algorithmic Intelligence to make real-time decisions:
KNN-Inspired Adaptation: The engine analyzes the last 150 bars of volatility and trend strength to automatically adjust its sensitivity.
Market Regime Intelligence: It distinguishes between "Trending" and "Ranging" states using a sophisticated Squeeze Momentum module, preventing "whipsaws" during low-volume periods.
Self-Backtesting Logic: The indicator continuously calculates its own historical Win-Rate. If the probability of success falls below a certain threshold, it suppresses lower-quality signals.
🛠 Key Features
Dynamic Consolidation Boxes: Automatically identifies and wraps "choppy" price action in professional gray boxes. It waits for 3+ bars of consolidation before marking the zone, helping you spot breakout opportunities early.
Multi-Strategy Aggression:
- Conservative: Filtered signals for long-term trend following.
- Balanced: Optimized for daily volatility.
- Aggressive: High-frequency signals for capturing micro-trends.
Dual-Exit Risk Management:
- ATR TP-SL Mode: Sets mathematical targets based on market volatility with persistent on-screen lines.
- Smart Trailing Mode: Rides the trend to its exhaustion point. Includes intelligent labeling (🎯 TP or 🛑 SL) based on the trade's net profitability.
- RSI Pullback Confirmation: Beyond simple trend flips, it detects "buy the dip" or "sell the rip" opportunities within an existing trend using RSI 50-level crossovers.
📊 Real-Time Analytics Dashboard
The integrated AlgoPoint Dashboard provides a surgical view of the market:
- Market State: Instant "Trending" vs. "Ranging" (Consolidation) detection.
- Trend Strength: ADX-based momentum tracking.
- Strategy Status: Real-time feedback on your active aggression and exit modes.
🎨 Clean Charting & Customization
Built for professional clarity, you have total control over the UI:
Toggle Consolidation Boxes on/off.
Toggle ATR Target Lines and Exit Labels.
Customize background filters and dashboard visibility. Indicator
Scalp Precision Matrix [BullByte]SCALP PRECISION MATRIX (SPM)
OVERVIEW
Scalp Precision Matrix (SPM) is a comprehensive decision-support framework designed specifically for scalpers and short-term traders. This indicator synthesizes five distinct analytical layers into a unified system that helps identify high-quality setups while avoiding common pitfalls that trap traders.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
THE CORE PROBLEM THIS INDICATOR ADDRESSES
Scalping demands rapid decision-making while simultaneously processing multiple data points. Traders constantly ask themselves: Is momentum still alive? Am I entering near a potential reversal zone? Is this the right session to trade? What is my actual risk-to-reward? Most traders either overwhelm themselves with too many separate indicators (creating analysis paralysis) or use too few (missing crucial context).
SPM was developed to consolidate these essential checks into one cohesive framework. Rather than overlaying disconnected indicators, each component in SPM directly informs and adjusts the others, creating an integrated analytical system.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHY THESE SPECIFIC COMPONENTS AND HOW THEY WORK TOGETHER
The five analytical layers in SPM are not arbitrarily combined. Each addresses a specific question in the scalping decision process, and together they form a logical workflow:
LAYER 1: MOMENTUM FUEL GAUGE
This answers the question: "Does the current move still have energy?"
After any impulse move (a significant directional price movement), momentum naturally decays over time. The Fuel Gauge estimates remaining momentum by analyzing four factors:
Body Strength (30% weight): Compares recent candle body sizes against the historical average. Strong momentum produces candles with large bodies relative to their wicks. The calculation takes the 3-bar average body size divided by the 20-bar average body size, then scales it to a 0-100 range.
Wick Rejection (25% weight): Measures the wick-to-body ratio. When wicks are large relative to bodies, it suggests rejection and weakening momentum. A ratio of 2.0 or higher (wicks twice the body size) scores low; smaller ratios score higher.
Volume Consistency (20% weight): Compares recent 3-bar average volume against the lookback period average. Sustained moves require consistent volume support. Volume dropping off suggests the move may be losing participation.
Time Decay (25% weight): Tracks how many bars have passed since the last detected impulse. Momentum naturally fades over time. The typical impulse duration is adjusted based on the current volatility regime.
These components are weighted and combined, then smoothed with a 3-period EMA to reduce noise. The result is a 0-100% gauge where:
- Above 70% = Strong momentum (green)
- 40-70% = Moderate momentum (amber)
- Below 40% = Weak momentum (red)
- Below 20% = Exhausted (triggers EXIT warning)
The Fuel Gauge also estimates how many bars of momentum remain based on the current burn rate.
IMPORTANT DISCLAIMER : The Fuel Gauge is NOT order flow, volume profile, or depth of market data. It is a technical proxy calculated entirely from standard OHLCV (Open, High, Low, Close, Volume) data. The term "Fuel" is used metaphorically to represent estimated remaining momentum energy.
LAYER 2: TRAP ZONE DETECTION
This answers the question: "Am I walking into a potential reversal area?"
Price tends to reverse at levels where it has reversed before. SPM identifies these zones by detecting clusters of historical swing points:
How it works:
1. The indicator detects swing highs and swing lows using the Swing Detection Length setting (default 5 bars on each side required to confirm a pivot).
2. Recent swing points are stored (up to 10 of each type).
3. For each potential zone, the algorithm counts how many swing points cluster within a tolerance of 0.5 ATR.
4. Zones with 2 or more clustered swing points, positioned between 0.3 and 4.0 ATR from current price, are marked as Trap Zones.
5. A Confluence Score is calculated based on cluster density and proximity to current price.
The percentage displayed (e.g., "TRAP 85%") is a CONFLUENCE SCORE, not a probability. Higher percentages mean more swing points cluster at that level and price is closer to it. This indicates stronger historical significance, not a prediction of future reversal.
CRITICAL DISCLAIMER : Trap Zones are NOT institutional order flow, liquidity pools, smart money footprints, or any proprietary data feed. They are calculated purely from historical swing point clustering using standard technical analysis. The term "trap" describes how price action has historically reversed at these levels, potentially trapping traders who enter prematurely. This is pattern recognition, not market structure data.
LAYER 3: VELOCITY ANALYSIS
This answers the question: "Is price moving favorably right now?"
Velocity measures how fast price is currently moving compared to its recent average:
Calculation:
- Current velocity = Absolute price change from previous bar divided by ATR
- Average velocity = Simple moving average of velocity over the lookback period
- Velocity ratio = Current velocity divided by average velocity
Classification:
- FAST (ratio above 1.5 ): Price is moving significantly faster than normal. Good for momentum continuation plays.
- NORMAL (ratio 0.5 to 1.5) : Typical price movement speed.
- SLOW (ratio below 0.5 ): Price is moving sluggishly. Often indicates ranging or choppy conditions where scalping becomes difficult.
The velocity score contributes 18% to the overall quality score calculation.
LAYER 4: SESSION AWARENESS
This answers the question: "Is this a good time to trade?"
Different trading sessions have different characteristics. SPM automatically detects which major session is active and adjusts its quality assessment:
Session Times (all in UTC):
- A sia Session : 00:00 - 08:00 UTC
- London Session : 08:00 - 16:00 UTC
- New York Session : 13:00 - 21:00 UTC
- London/NY Overlap : 13:00 - 16:00 UTC
- Off-Peak : Outside major sessions
Session Quality Weighting:
- Overlap : 100 points (highest liquidity, best movement)
- London : 85 points
- New York : 80 points
- Asia : 50 points (tends to range more)
- Off-Peak : 30 points (lower liquidity, more false signals)
The session score contributes 17% to the overall quality calculation. Signals are also filtered to prevent firing during off-peak hours.
Note : These are fixed UTC times and may not perfectly match your broker's session boundaries. Use them as general guidance rather than precise timing.
LAYER 5: VOLATILITY REGIME ADAPTATION
This answers the question: "How should I adjust for current market conditions?"
SPM compares current volatility (14-period ATR) against historical volatility (50-period ATR) to categorize the market:
HIGH Volatility (ratio above 1.3): Current ATR is 30%+ above normal. SPM widens thresholds to filter noise and extends target projections.
NORMAL Volatility (ratio 0.7 to 1.3): Typical conditions. Standard parameters apply.
LOW Volatility (ratio below 0.7): Current ATR is 30%+ below normal. SPM tightens thresholds for sensitivity and reduces target expectations. The market state may show AVOID during prolonged low volatility.
This adaptation prevents false signals during erratic markets and missed signals during quiet markets.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
THE SYNERGY: WHY THIS COMBINATION MATTERS
These five layers are not independent indicators placed on one chart. They form an interconnected system:
- A signal only fires when momentum exists (Fuel above 40%), price is away from danger zones (Trap Zones factored into quality score), movement is favorable (Velocity contributes to score), timing is appropriate (Session is not off-peak), and volatility is accounted for (thresholds adapt to regime).
- The Trap Zones directly influence Entry Zone placement. Entry zones are positioned beyond trap zones to avoid getting caught in reversals.
- Target projections automatically adjust to avoid placing take-profit levels inside detected trap zones.
- The Fuel Gauge affects which signal tier fires. Insufficient fuel prevents all signals.
- Session quality is weighted into the overall score, reducing signal quality during less favorable trading hours.
This integration is the core originality of SPM. Each component makes the others more useful than they would be in isolation.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW THE QUALITY SCORE IS CALCULATED
The Quality Score (0-100) synthesizes all layers into a single number for each direction (long and short):
For Long Quality Score:
- Fuel Component (28% weight) : Full fuel value if impulse direction is bullish; 60% of fuel value otherwise
- Trap Avoidance (22% weight) : 75 points if no trap zone below; otherwise 100 minus the trap confluence score (minimum 20)
- Velocity Component (18% weight) : Direct velocity score
- Session Component (17% weight) : Current session quality score
- Trend Alignment (15% bonus) : Adds 12 points if price is above the 20-period SMA
For Short Quality Score:
- Same structure but reversed (bearish impulse direction, trap zone above, price below SMA)
The direction with the higher score becomes the current Bias. A 12-point difference is required to switch bias, preventing flip-flopping in neutral conditions.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SIGNAL TYPES AND WHAT THEY MEAN
SPM generates four types of signals, each with specific visual representation:
PRIME SIGNALS (Cyan Diamond)
These represent the highest quality confluence. Requirements:
- Quality score crosses above the Prime threshold (default 80)
- Bias aligns with signal direction
- Fuel is sufficient (above 40%)
- Session is active (not off-peak)
- Cooldown period has passed
Prime signals appear as cyan-colored diamond shapes. Long signals appear below the bar; short signals appear above.
STANDARD SIGNALS (Green Triangle Up / Red Triangle Down)
These represent good quality setups. Requirements:
- Quality score crosses above the Standard threshold (default 75) but below Prime
- Same bias, fuel, and cooldown requirements as Prime
Standard signals appear as small triangles in green (long) or red (short).
CAUTION SIGNALS (Small Faded Circle)
These represent minimum threshold setups. Requirements:
- Quality score crosses above the Caution threshold (default 65) but below Standard
- Same additional requirements
Caution signals appear as small, faded circles. These suggest the setup exists but with weaker confluence. Consider these only when broader market context supports them, or skip them entirely during uncertain conditions.
EXHAUSTION SIGNAL (Purple X with "EXIT" text)
This warning appears when the Fuel Gauge drops below 20% from above, indicating momentum has depleted. This is not a trade signal but a warning to:
- Consider exiting existing positions
- Avoid entering new trades in the current direction
- Wait for new momentum to develop
All signals use CONFIRMED bar data only (referencing the previous closed bar) to prevent repainting. Once a signal appears, it will never disappear or change position on historical bars.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
READING THE CHART ELEMENTS
TRAP ZONES (Red Dashed Box with "TRAP XX%" Label)
These mark price levels where multiple historical swing points cluster. The red dashed box shows the zone boundaries. The percentage is the confluence score indicating cluster strength and proximity.
How to use: When price approaches a trap zone, be cautious about entering in that direction. If your bias is LONG and there's a strong trap zone above, consider taking partial profits before price reaches it or adjusting your target below it.
ENTRY ZONES (Green Solid Box with "ENTRY" Label)
These show suggested entry areas based on the current bias direction. For LONG bias, the entry zone appears below the trap zone (buying the dip beyond support). For SHORT bias, it appears above the trap zone (selling the rally beyond resistance).
How to use: Rather than entering at current price, consider placing limit orders within the entry zone. This positions you beyond where typical trap reversals occur.
TARGET ZONES (Blue Dotted Box with "TARGET" Label)
These project potential take-profit areas based on ATR multiples, adjusted for:
- Current volatility regime (wider in high volatility, tighter in low)
- Impulse direction (larger targets when aligned with impulse)
- Nearby trap zones (targets adjust to avoid placing TP inside trap zones)
How to use: These are suggestions, not guarantees. Consider taking partial profits before the target or using trailing stops once price moves favorably.
STOP LEVEL (Orange Dashed Line with "STOP" Label)
This shows suggested stop-loss placement, calculated as 0.8 ATR beyond the trap zone (or 2.0 ATR from current price if no trap zone exists).
How to use: This provides a reference for risk calculation. The dashboard R:R ratio is calculated using this stop level.
Chart Example: Scalp Precision Matrix displays real-time market analysis through dynamic zones and quality scores. ENTRY/TARGET/STOP zones show potential price levels based on current market structure - they appear continuously as reference points, NOT as trade instructions. Actual trade signals (diamonds, triangles, circles) fire only when multiple conditions align: quality score thresholds are crossed, fuel gauge is sufficient, session is active, and cooldown period has passed. The zones help you understand market context; the signals tell you when to act.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
UNDERSTANDING THE DASHBOARD (Top Right Panel)
The main dashboard provides comprehensive market context:
Row 1 - Header:
- "SPM " : Indicator name
- Market State : Current overall condition
Market States Explained:
- PRIME : Excellent conditions. Quality score meets prime threshold, session is active. Best opportunities.
- READY : Good conditions. Quality score meets standard threshold. Solid setups available.
- WAIT : Mixed conditions. Some factors favorable, others not. Patience recommended.
- AVOID : Poor conditions. Off-peak session or very low volatility. High risk of false signals.
- EXIT : Fuel exhausted. Momentum depleted. Consider closing positions or waiting.
Row 2-3 - Quality Bars:
- " UP ########## " : Visual meter for long quality (each # = 10 points, . = empty)
- " DN ########## " : Visual meter for short quality
- The number on the right shows the exact quality score
Row 4 - Bias:
- Shows current directional lean: LONG, SHORT, or NEUTRAL
- Color-coded: Green for long, red for short, gray for neutral
Rows 5-7 (Full Mode Only) - Trade Levels:
- Entry : Suggested entry price for current bias direction
- Stop : Suggested stop-loss price
- Target : Projected take-profit price
Row 8 - Risk:Reward Ratio:
- Format : "1:X.X" where X.X is the reward multiple
- Color-coded : Green if 2:1 or better, amber if 1.5:1 to 2:1, red if below 1.5:1
Row 9 - Fuel:
- Shows percentage and estimated bars remaining in parentheses
- Example : "72% (8)" means 72% fuel with approximately 8 bars remaining
- Color-coded : Green above 70%, amber 40-70%, red below 40%
Row 10-11 (Full Mode Only) - Market Conditions:
- Vol : Current volatility regime (HIGH/NORMAL/LOW)
- Speed : Current velocity zone (FAST/NORMAL/SLOW)
Row 12 - Session:
- Shows active trading session
- Color-coded by session type
Row 13 (Full Mode Only) - Remaining:
- Time remaining in current session (hours and minutes)
Row 14 (Conditional) - Trap Warning:
- Appears when a significant trap zone exists in your bias direction
- Shows direction (ABOVE/BELOW) and confluence percentage
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
UNDERSTANDING THE QUICK PANEL (Bottom Left)
The Quick Panel provides essential information at a glance without looking away from price action:
Row 1: Current Bias and Quality Score (large text for quick reading)
Row 2: Market State
Row 3: Fuel Percentage
Row 4: Estimated Bars Remaining
Row 5: Risk:Reward Ratio
Row 6: Current Session
Both panels can be repositioned using the settings, and each can be toggled on/off independently.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SETTINGS EXPLAINED
CORE SETTINGS:
Analysis Lookback (Default: 20)
Number of bars used for statistical calculations including average volume and average body size. Higher values create smoother but slower-reacting analysis. Lower values are more responsive but may include more noise.
Swing Detection Length (Default: 5)
Bars required on each side to confirm a swing high or low. A setting of 5 means a swing high must have 5 lower highs on each side. Lower values detect more swings (more trap zones, more sensitivity). Higher values find only major pivots (fewer but more significant zones).
Impulse Sensitivity (Default: 1.5)
Multiplier for ATR when detecting impulse moves. Lower values (like 1.0) detect smaller price movements as impulses, refreshing the fuel gauge more frequently. Higher values (like 2.5) require larger moves, making impulse detection less frequent but more significant.
SIGNAL SETTINGS:
Prime/Standard/Caution Thresholds (Defaults: 80/75/65)
These control the quality score required for each signal tier. You can adjust these based on your preference:
- More conservative : Raise thresholds (e.g., 85/80/70) for fewer but higher-quality signals
- More aggressive : Lower thresholds (e.g., 75/70/60) for more signals with slightly lower quality
Signal Cooldown (Default: 8 bars)
Minimum bars between signals to prevent signal spam. After any signal fires, no new signals can appear until this many bars pass. Increase for fewer signals in choppy markets; decrease if you want faster signal refresh.
Show Prime/Standard/Caution/Exhaustion Signals
Toggle each signal type on or off based on your preference.
ZONE DISPLAY:
Show Trap Zones / Entry Zones / Target Zones / Stop Levels
Toggle each zone type on or off. Turning off zones you don't use reduces chart clutter.
Zone Transparency (Default: 88)
Controls how transparent zone boxes appear. Higher values (closer to 95) make zones barely visible; lower values (closer to 75) make them more prominent.
Zone History (Default: 25 bars)
How far back zone boxes extend on the chart. Purely visual preference.
BACKGROUND:
Background Mode (Options: Off, Subtle, Normal)
Controls whether and how intensely the chart background is colored. Subtle is barely noticeable; Normal is more visible; Off disables background coloring entirely.
Background Type (Options: Bias, Fuel)
- Bias : Colors background based on current directional lean (green for long, red for short)
- Fuel : Colors background based on momentum level (green for high fuel, amber for moderate, red for low)
DASHBOARD / QUICK PANEL:
Show Dashboard / Show Quick Panel
Toggle each panel on or off.
Compact Mode
When enabled, the main dashboard shows only essential rows (quality bars, bias, R:R, fuel, session) without entry/stop/target levels, volatility, velocity, or time remaining.
Position Settings
Choose where each panel appears on your chart from six options: Top Right, Top Left, Bottom Right, Bottom Left, Middle Right, Middle Left.
ALERTS:
Alert Prime Signals / Standard Signals / Fuel Exhaustion
Enable or disable PulseWire alerts for each condition. When enabled, you can set up alerts in PulseWire that will notify you when these conditions occur.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
RECOMMENDED TIMEFRAMES AND USAGE
OPTIMAL TIMEFRAMES:
- 1-minute to 5-minute : Best for active scalping with quick entries and exits
- 5-minute to 15-minute : Balanced scalping with slightly more confirmation
- 15-minute to 1-hour : Short-term swing entries, fewer but more significant signals
Zone visualizations only appear on intraday timeframes to prevent chart clutter on higher timeframes.
BEST PRACTICES:
1. Trade primarily during LONDON, NEW YORK, or OVERLAP sessions. The indicator weights these sessions higher for good reason - liquidity and movement are typically better.
2. Prioritize PRIME signals. These represent the highest confluence and have proven most reliable. Use STANDARD signals as secondary opportunities. Treat CAUTION signals with extra scrutiny.
3. Respect the Fuel Gauge. Avoid entering new positions when fuel is below 40%. When the EXIT signal appears, seriously consider closing or reducing positions.
4. Pay attention to TRAP warnings. When the dashboard shows a trap zone in your bias direction, be cautious about holding through that level.
5. Verify R:R before entry. The dashboard shows the risk-to-reward ratio. Ensure it meets your minimum requirements (many traders require at least 1.5:1 or 2:1).
6. When state shows AVOID or EXIT, step back. These conditions typically produce poor results.
7. Combine with your own analysis. SPM is a decision-support tool, not a standalone system. Use it alongside your understanding of market structure, news events, and overall context.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PRACTICAL EXAMPLE
Scenario : You're watching a 5-minute chart during London session. A cyan diamond (Prime Long signal) appears below the bar.
Before entering, you check the dashboard:
- State shows "PRIME" - conditions are favorable
- Fuel shows "72% (8)" - plenty of momentum remaining (approximately 8 bars)
- R:R shows "1:2.3" - acceptable risk-to-reward ratio
- Session shows "LONDON" - active session with good liquidity
- No TRAP warning in dashboard - no immediate resistance cluster in your way
- Entry zone visible on chart at a lower price level
- Stop and Target zones clearly marked
With this confluence of factors, you have context for a more informed decision. The signal indicates quality, the fuel suggests momentum remains, the R:R is favorable, and no immediate trap threatens your trade.
However, you also notice the target zone sits just below where a trap zone would be if there were one. This is by design - SPM adjusts targets to avoid placing them inside reversal zones.
This multi-factor confirmation delivered in a single glance is what SPM provides.
Chart Example :This chart demonstrates how the Scalp Precision Matrix identifies key market transitions. After a strong bullish impulse (cyan PRIME signal at ~08:30), price reached a historical reversal cluster (TRAP ZONE at 92,300). The indicator detected momentum exhaustion (purple EXIT signal) as fuel dropped below 20%, warning traders to exit longs. Now showing a SHORT bias with entry/stop/target zones clearly marked. The 92% trap zone confluence indicates a strong cluster of previous swing highs where price historically reversed.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DATA WINDOW VALUES
For detailed analysis and strategy development, SPM exports the following values to PulseWire's Data Window (visible when you hover over the chart with the indicator selected):
- Long Quality Score (0-100)
- Short Quality Score (0-100)
- Fuel Gauge (0-100%)
- Risk:Reward Ratio
These values can be useful for understanding how the indicator behaves over time and for developing your own insights about when it works best for your trading style.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NON-REPAINTING CONFIRMATION
All signals in SPM are generated using CONFIRMED bar data only. The signal logic references the previous closed bar's values ( and in Pine Script terms). This means:
- Signals appear at the OPEN of the new bar (after the previous bar closes)
- Signals will NEVER disappear once they appear
- Signals will NEVER change position on historical bars
- What you see in backtesting is what you would have seen in real-time
The dashboard and zones update in real-time to provide current market context, but the trading signals themselves are non-repainting.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
IMPORTANT DISCLAIMERS
TERMINOLOGY CLARIFICATION:
This indicator uses terms that might imply access to data it does not have. To be completely transparent:
- "Trap Zones" are calculated from historical swing point clustering. They are NOT institutional liquidity pools, order blocks, smart money footprints, or any form of order flow data. The term "trap" is metaphorical, describing how price has historically reversed at these levels.
- "Fuel Gauge" is a technical momentum proxy. It is NOT order flow, volume profile, depth of market, or bid/ask data. It estimates momentum remaining based entirely on standard OHLCV price and volume data.
- "Quality Scores" are weighted combinations of the technical factors described above. A high score indicates multiple conditions align favorably according to the indicator's logic. It does NOT predict or guarantee trade success.
- The percentages shown on trap zones are CONFLUENCE SCORES measuring cluster density and proximity. They are NOT probability predictions of reversal.
TRADING RISK WARNING:
Trading involves substantial risk of loss and is not suitable for all investors. This indicator is a technical analysis tool designed to assist with decision-making. It does not constitute financial advice, trading advice, or any other sort of advice. Past performance of any signal or pattern does not guarantee future results. Markets are inherently unpredictable.
Always use proper risk management. Define your risk before entering any trade. Never risk more than you can afford to lose. Consider consulting with a licensed financial advisor before making trading decisions.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ORIGINALITY STATEMENT - NOT A MASHUP
Scalp Precision Matrix is an original work that combines several analytical concepts into a purpose-built scalping framework. While individual components like ATR calculations, pivot detection, session timing, and trend alignment exist in various forms elsewhere, the specific implementation here represents original synthesis:
- The Fuel Gauge decay model with its four-component weighted calculation
- The Trap Zone cluster detection with confluence scoring
- The multi-factor quality scoring system that integrates all layers
- The trap-aware entry and target zone placement logic
- The volatility regime adaptation across all components
- The session weighting is integrated into the quality assessment
The indicator does not simply overlay separate indicators on one chart. It creates interconnected layers where each component informs and adjusts the others. This integration is the core originality of SPM.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
For best results, combine SPM with your own market understanding and always practice proper risk management.
-BullByte Indicator
Indicator
Indicator
RightFlow Universal Volume Profile - Any Market Any TimeframeSummary in one paragraph
RightFlow is a right anchored microstructure volume profile for stocks, futures, FX, and liquid crypto on intraday and daily timeframes. It acts only when several conditions align inside a session window and presents the result as a compact right side profile with value area, POC, a bull bear mix by price bin, and a HUD of profile VWAP and pressure shares. It is original because it distributes each bar’s weight into multiple mid price slices, blends bull bear pressure per bin with a CLV based split, and grows the profile to the right so price action stays readable. Add to a clean chart, read the table, and use the visuals. For conservative workflows read on bar close.
Scope and intent
• Markets. Major FX pairs, index futures, large cap equities and ETFs, liquid crypto.
• Timeframes. One minute to daily.
• Default demo used in the publication. SPY on 15 minute.
• Purpose. See where participation concentrates, which side dominated by price level, and how far price sits from VA and POC.
Originality and usefulness
• Unique fusion. Right anchored growth plus per bar slicing and CLV split, with weight modes Raw, Notional, and DeltaProxy.
• Failure mode addressed. False reads from single bar direction and coarse binning.
• Testability. All parts sit in Inputs and the HUD.
• Portable yardstick. Value Area percent and POC are universal across symbols.
• Protected scripts. Not applicable. Method and use are fully disclosed.
Method overview in plain language
Pick a scope Rolling or Today or This Week. Define a window and number of price bins. For each bar, split its range into small slices, assign each slice a weight from the selected mode, and split that weight by CLV or by bar direction. Accumulate totals per bin. Find the bin with the highest total as POC. Expand left and right until the chosen share of total volume is covered to form the value area. Compute profile VWAP for all, buyers, and sellers and show them with pressure shares.
Base measures
Range basis. High minus low and mid price samples across the bar window.
Return basis. Not used. VWAP trio is price weighted by weights.
Components
• RightFlow Bins. Price histogram that grows to the right.
• Bull Bear Split. CLV based 0 to 1 share or pure bar direction.
• Weight Mode. Raw volume, notional volume times close, or DeltaProxy focus.
• Value Area Engine. POC then outward expansion to target share.
• HUD. Profile VWAP, Buy and Sell percent, winner delta, split and weight mode.
• Session windows optional. Scope resets on day or week.
Fusion rule
Color of each bin is the convex blend of bull and bear shares. Value area shading is lighter inside and darker outside.
Signal rule
This is context, not a trade signal. A strong separation between buy and sell percent with price holding inside VA often confirms balance. Price outside VA with skewed pressure often marks initiative moves.
What you will see on the chart
• Right side bins with blended colors.
• A POC line across the profile width.
• Labels for POC, VAH, and VAL.
• A compact HUD table in the top right.
Table fields and quick reading guide
• VWAP. Profile VWAP.
• Buy and Sell. Pressure shares in percent.
• Delta Winner. Winner side and margin in percent.
• Split and Weight. The active modes.
Reading tip. When Session scope is Today or This Week and Buy minus Sell is clearly positive or negative, that side often controls the day’s narrative.
Inputs with guidance
Setup
• Profile scope. Rolling or session reset. Rolling uses window bars.
• Rolling window bars. Typical 100 to 300. Larger is smoother.
Binning
• Price bins. Typical 32 to 128. More bins increase detail.
• Slices per bar. Typical 3 to 7. Raising it smooths distribution.
Weighting
• Weight mode. Raw, Notional, DeltaProxy. Notional emphasizes expensive prints.
• Bull Bear split. CLV or BarDir. CLV is more nuanced.
• Value Area percent. Typical 68 to 75.
View
• Profile width in bars, color split toggle, value area shading, opacities, POC line, VA labels.
Usage recipes
Intraday trend focus
• Scope Today, bins 64, slices 5, Value Area 70.
• Split CLV, Weight Notional.
Intraday mean reversion
• Scope Today, bins 96, Value Area 75.
• Watch fades back to POC after initiative pushes.
Swing continuation
• Scope Rolling 200 bars, bins 48.
• Use Buy Sell skew with price relative to VA.
Realism and responsible publication
No performance claims. Shapes can move while a bar forms and settle on close. Education only.
Honest limitations and failure modes
Thin liquidity and data gaps can distort bin weights. Very quiet regimes reduce contrast. Session time is the chart venue time.
Open source reuse and credits
None.
Legal
Education and research only. Not investment advice. Test on history and simulation before live use. Indicator
LEGEND IsoPulse Fusion Universal Volume Trend Buy Sell RadarLEGEND IsoPulse Fusion • Universal Volume Trend Buy Sell Radar
One line summary
LEGEND IsoPulse Fusion reads intent from price and volume together, learns which features matter most on your symbol, blends them into a single signed Fusion line in a stable unit range, and emits clear Buy Sell Close events with a structure gate and a liquidity safety gate so you act only when the tape is favorable.
What this script is and why it exists
Many traders keep separate windows for trend, volume, volatility, and regime filters. The result can feel fragmented. This script merges two complementary engines into one consistent view that is easy to read and simple to act on.
LEGEND Tensor estimates directional quality from five causally computed features that are normalized for stationarity. The features are Flow, Tail Pressure with Volume Mix, Path Curvature, Streak Persistence, and Entropy Order.
IsoPulse transforms raw volume into two decaying reservoirs for buy effort and sell effort using body location and wick geometry, then measures price travel per unit volume for efficiency, and detects volume bursts with a recency memory.
Both engines are mapped into the same unit range and fused by a regime aware mixer. When the tape is orderly the mixer leans toward trend features. When the tape is messy but a true push appears in volume efficiency with bursts the mixer allows IsoPulse to speak louder. The outcome is a single Fusion line that lives in a familiar range with calm behavior in quiet periods and expressive pushes when energy concentrates.
What makes it original and useful
Two reservoir volume split . The script assigns a portion of the bar volume to up effort and down effort using body location and wick geometry together. Effort decays through time using a forgetting factor so memory is present without becoming sticky.
Efficiency of move . Price travel per unit volume is often more informative than raw volume or raw range. The script normalizes both sides and centers the efficiency so it becomes signed fuel when multiplied by flow skew.
Burst detection with recency memory . Percent rank of volume highlights bursts. An exponential memory of how recently bursts clustered converts isolated blips into useful context.
Causal adaptive weighting . The LEGEND features do not receive static weights. The script learns, causally, which features have correlated with future returns on your symbol over a rolling window. Only positive contributions are allowed and weights are normalized for interpretability.
Regime aware fusion . Entropy based order and persistence create a mixer that blends IsoPulse with LEGEND. You see a single line rather than two competing panels, which reduces decision conflict.
How to read the screen in seconds
Fusion area . The pane fills above and below zero with a soft gradient. Deeper fill means stronger conviction. The white Fusion line sits on top for precise crossings.
Entry guides and exit guides . Two entry guides draw symmetrically at the active fused entry level. Two exit guides sit inside at a fraction of the entry. Think of them as an adaptive envelope.
Letters . B prints once when the script flips from flat to long. S prints once when the script flips from flat to short. C prints when a held position ends on the appropriate side. T prints when the structure gate first opens. A prints when the liquidity safety flag first appears.
Price bar paint . Bars tint green while long and red while short on the chart to mirror your virtual position.
HUD . A compact dashboard in the corner shows Fusion, IsoPulse, LEGEND, active entry and exit levels, regime status, current virtual position, and the vacuum z value with its avoid threshold.
What signals actually mean
Buy . A Buy prints when the Fusion line crosses above the active entry level while gates are open and the previous state was flat.
Sell . A Sell prints when the Fusion line crosses below the negative entry level while gates are open and the previous state was flat.
Close . A Close prints when Fusion cools back inside the exit envelope or when an opposite cross would occur or when a gate forces a stop, and the previous state was a hold.
Gates . The Trend gate requires sufficient entropy order or significant persistence. The Avoid gate uses a liquidity vacuum z score. Gates exist to protect you from weak tape and poor liquidity.
Inputs and practical tuning
Every input has a tooltip in the script. This section provides a concise reference that you can keep in mind while you work.
Setup
Core window . Controls statistics across features. Scalping often prefers the thirties or low fifties. Intraday often prefers the fifties to eighties. Swing often prefers the eighties to low hundreds. Smaller responds faster with more noise. Larger is calmer.
Smoothing . Short EMA on noisy features. A small value catches micro shifts. A larger value reduces whipsaw.
Fusion and thresholds
Weight lookback . Sample size for weight learning. Use at least five times the horizon. Larger is slower and more confident. Smaller is nimble and more reactive.
Weight horizon . How far ahead return is measured to assess feature value. Smaller favors quick reversion impulses. Larger favors continuation.
Adaptive thresholds . Entry and exit levels from rolling percentiles of the absolute LEGEND score. This self scales across assets and timeframes.
Entry percentile . Eighty selects the top quintile of pushes. Lower to seventy five for more signals. Raise for cleanliness.
Exit percentile . Mid fifties keeps trades honest without overstaying. Sixty holds longer with wider give back.
Order threshold . Minimum structure to trade. Zero point fifteen is a reasonable start. Lower to trade more. Raise to filter chop.
Avoid if Vac z . Liquidity safety level. One point two five is a good default on liquid markets. Thin markets may prefer a slightly higher setting to avoid permanent avoid mode.
IsoPulse
Iso forgetting per bar . Memory for the two reservoirs. Values near zero point nine eight to zero point nine nine five work across many symbols.
Wick weight in effort split . Balance between body location and wick geometry. Values near zero point three to zero point six capture useful behavior.
Efficiency window . Travel per volume window. Lower for snappy symbols. Higher for stability.
Burst percent rank window . Window for percent rank of volume. Around one hundred to three hundred covers most use cases.
Burst recency half life . How long burst clusters matter. Lower for quick fades. Higher for cluster memory.
IsoPulse gain . Pre compression gain before the atan mapping. Tune until the Fusion line lives inside a calm band most of the time with expressive spikes on true pushes.
Continuation and Reversal guides . Visual rails for IsoPulse that help you sense continuation or exhaustion zones. They do not force events.
Entry sensitivity and exit fraction
Entry sensitivity . Loose multiplies the fused entry level by a smaller factor which prints more trades. Strict multiplies by a larger factor which selects fewer and cleaner trades. Balanced is neutral.
Exit fraction . Exit level relative to the entry level in fused unit space. Values around one half to two thirds fit most symbols.
Visuals and UX
Columns and line . Use both to see context and precise crossings. If you present a very clean chart you can turn columns off and keep the line.
HUD . Keep it on while you learn the script. It teaches you how the gates and thresholds respond to your market.
Letters . B S C T A are informative and compact. For screenshots you can toggle them off.
Debug triggers . Show raw crosses even when gates block entries. This is useful when you tune the gates. Turn them off for normal use.
Quick start recipes
Scalping one to five minutes
Core window in the thirties to low fifties.
Horizon around five to eight.
Entry percentile around seventy five.
Exit fraction around zero point five five.
Order threshold around zero point one zero.
Avoid level around one point three zero.
Tune IsoPulse gain until normal Fusion sits inside a calm band and true squeezes push outside.
Intraday five to thirty minutes
Core window around fifty to eighty.
Horizon around ten to twelve.
Entry percentile around eighty.
Exit fraction around zero point five five to zero point six zero.
Order threshold around zero point one five.
Avoid level around one point two five.
Swing one hour to daily
Core window around eighty to one hundred twenty.
Horizon around twelve to twenty.
Entry percentile around eighty to eighty five.
Exit fraction around zero point six zero to zero point seven zero.
Order threshold around zero point two zero.
Avoid level around one point two zero.
How to connect signals to your risk plan
This is an indicator. You remain in control of orders and risk.
Stops . A simple choice is an ATR multiple measured on your chart timeframe. Intraday often prefers one point two five to one point five ATR. Swing often prefers one point five to two ATR. Adjust to symbol behavior and personal risk tolerance.
Exits . The script already prints a Close when Fusion cools inside the exit envelope. If you prefer targets you can mirror the entry envelope distance and convert that to points or percent in your own plan.
Position size . Fixed fractional or fixed risk per trade remains a sound baseline. One percent or less per trade is a common starting point for testing.
Sessions and news . Even with self scaling, some traders prefer to skip the first minutes after an open or scheduled news. Gate with your own session logic if needed.
Limitations and honest notes
No look ahead . The script is causal. The adaptive learner uses a shifted correlation, crosses are evaluated without peeking into the future, and no lookahead security calls are used. If you enable intrabar calculations a letter may appear then disappear before the close if the condition fails. This is normal for any cross based logic in real time.
No performance promises . Markets change. This is a decision aid, not a prediction machine. It will not win every sequence and it cannot guarantee statistical outcomes.
No dependence on other indicators . The chart should remain clean. You can add personal tools in private use but publications should keep the example chart readable.
Standard candles only for public signals . Non standard chart types can change event timing and produce unrealistic sequences. Use regular candles for demonstrations and publications.
Internal logic walkthrough
LEGEND feature block
Flow . Current return normalized by ATR then smoothed by a short EMA. This gives directional intent scaled to recent volatility.
Tail pressure with volume mix . The relative sizes of upper and lower wicks inside the high to low range produce a tail asymmetry. A volume based mix can emphasize wick information when volume is meaningful.
Path curvature . Second difference of close normalized by ATR and smoothed. This captures changes in impulse shape that can precede pushes or fades.
Streak persistence . Up and down close streaks are counted and netted. The result is normalized for the window length to keep behavior stable across symbols.
Entropy order . Shannon entropy of the probability of an up close. Lower entropy means more order. The value is oriented by Flow to preserve sign.
Causal weights . Each feature becomes a z score. A shifted correlation against future returns over the horizon produces a positive weight per feature. Weights are normalized so they sum to one for clarity. The result is angle mapped into a compact unit.
IsoPulse block
Effort split . The script estimates up effort and down effort per bar using both body location and wick geometry. Effort is integrated through time into two reservoirs using a forgetting factor.
Skew . The reservoir difference over the sum yields a stable skew in a known range. A short EMA smooths it.
Efficiency . Move size divided by average volume produces travel per unit volume. Normalization and centering around zero produce a symmetric measure.
Bursts and recency . Percent rank of volume highlights bursts. An exponential function of bars since last burst adds the notion of cluster memory.
IsoPulse unit . Skew multiplied by centered efficiency then scaled by the burst factor produces the raw IsoPulse that is angle mapped into the unit range.
Fusion and events
Regime factor . Entropy order and streak persistence form a mixer. Low structure favors IsoPulse. Higher structure favors LEGEND. The blend is convex so it remains interpretable.
Blended guides . Entry and exit guides are blended in the same way as the line so they stay consistent when regimes change. The envelope does not jump unexpectedly.
Virtual position . The script maintains state. Buy and Sell require a cross while flat and gates open. Close requires an exit or force condition while holding. Letters print once at the state change.
Disclosures
This script and description are educational. They do not constitute investment advice. Markets involve risk. You are responsible for your own decisions and for compliance with local rules. The logic is causal and does not look ahead. Signals on non standard chart types can be misleading and are not recommended for publication. When you test a strategy wrapper, use realistic commission and slippage, moderate risk per trade, and enough trades to form a meaningful sample, then document those assumptions if you share results.
Closing thoughts
Clarity builds confidence. The Fusion line gives a single view of intent. The letters communicate action without clutter. The HUD confirms context at a glance. The gates protect you from weak tape and poor liquidity. Tune it to your instrument, observe it across regimes, and use it as a consistent lens rather than a prediction oracle. The goal is not to trade every wiggle. The goal is to pick your spots with a calm process and to stand aside when the tape is not inviting. Indicator
Momentum Fusion v1Momentum Fusion v1
Overview
Momentum Fusion v1 (MFusion) is a multi-oscillator indicator that combines several components to analyze market momentum and trend strength. It incorporates modified versions of classic indicators such as PVI (Positive Volume Index), NVI (Negative Volume Index), MFI (Money Flow Index), RSI, Stochastic, and Bollinger Bands Oscillator. The indicator displays a histogram that changes color based on momentum strength and includes "FUSION🔥" signal labels when extreme values are reached.
Indicator Settings
Parameters:
EMA Length – Smoothing period for the moving average (default: 255).
Smoothing Period – Internal calculation smoothing parameter (default: 15).
BB Multiplier – Standard deviation multiplier for Bollinger Bands (default: 2.0).
Show verde / marron / media lines – Toggles the display of auxiliary lines.
Show FUSION🔥 label – Enables/disables signal labels.
Indicator Components
1. PVI (Positive Volume Index)
Formula:
pvi := volume > volume ? nz(pvi ) + (close - close ) / close * sval : nz(pvi )
Description:
PVI increases when volume rises compared to the previous bar and accounts for price percentage change. The stronger the price movement with increasing volume, the higher the PVI value.
2. NVI (Negative Volume Index)
Formula:
nvi := volume < volume ? nz(nvi ) + (close - close ) / close * sval : nz(nvi )
Description:
NVI tracks price movements during declining volume. If the price rises on low volume, it may indicate a "stealth" trend.
3. Money Flow Index (MFI)
Formula:
100 - 100 / (1 + up / dn)
Description:
An oscillator measuring money flow strength. Values above 80 suggest overbought conditions, while values below 20 indicate oversold conditions.
4. Stochastic Oscillator
Formula:
k = 100 * (close - lowest(low, length)) / (highest(high, length) - lowest(low, length))
Description:
A classic stochastic oscillator showing price position relative to the selected period's range.
5. Bollinger Bands Oscillator
Formula:
(tprice - BB midline) / (upper BB - lower BB) * 100
Description:
Indicates the price position relative to Bollinger Bands in percentage terms.
Key Lines & Histogram
1. Verde (Green Line)
Calculation:
verde = marron + oscp (normalized PVI)
Interpretation:
Higher values indicate stronger bullish momentum. A FUSION🔥 signal appears when the value reaches 750+.
2. Marron (Brown Line)
Calculation:
marron = (RSI + MFI + Bollinger Osc + Stochastic / 3) / 2
Interpretation:
A composite oscillator combining multiple indicators. Higher values suggest overbought conditions.
3. Media (Red Line)
Calculation:
media = EMA of marron with smoothing period
Interpretation:
Acts as a signal line for trend confirmation.
4. Histogram
Calculation:
histo = verde - marron
Colors:
Bright green (>100) – Strong bullish momentum.
Light green (>0) – Moderate bullish momentum.
Orange (<0) – Bearish momentum.
Red (<-100) – Strong bearish momentum.
Signals & Alerts
1. FUSION🔥 (Strong Momentum)
Condition:
verde >= 750
Visualization:
A "FUSION🔥" label appears below the chart.
Alert:
Can be set to trigger notifications when the condition is met.
2. Background Aura
Condition:
verde > 850
Visualization:
The chart background turns teal, indicating extreme momentum.
Usage Recommendations
FUSION🔥 Signal – Can be used as a long entry point when confirmed by other indicators.
Histogram:
1. Green bars – Potential long entry.
2. Red/orange bars – Potential short entry.
3. Media & Marron Crossover – Can serve as an additional trend filter.
4. Suitable for a 5-15 minute time frame
Conclusion
Momentum Fusion v1 is a powerful tool for momentum analysis, combining multiple indicators into a unified system. It is suitable for:
Trend traders (catching strong movements).
Scalpers (identifying short-term impulses).
Swing traders (filtering entry points).
The indicator features customizable settings and visual signals, making it adaptable to various trading styles. Indicator
Williams R Zone Scalper v1.0[BullByte]Originality & Usefulness
Unlike standard Williams R cross-over scripts, this strategy layers five dynamic filters—moving-average trend, Supertrend, Choppiness Index, Bollinger Band Width, and volume validation —and presents a real-time dashboard with equity, PnL, filter status, and key indicator values. No other public Pine script combines these elements with toggleable filters and a custom dashboard. In backtests (BTC/USD (Binance), 5 min, 24 Mar 2025 → 28 Apr 2025), adding these filters turned a –2.09 % standalone Williams R into a +5.05 % net winner while cutting maximum drawdown in half.
---
What This Script Does
- Monitors Williams R (length 14) for overbought/oversold reversals.
- Applies up to five dynamic filters to confirm trend strength and volatility direction:
- Moving average (SMA/EMA/WMA/HMA)
- Supertrend line
- Choppiness Index (CI)
- Bollinger Band Width (BBW)
- Volume vs. its 50-period MA
- Plots blue arrows for Long entries (R crosses above –80 + all filters green) and red arrows for Short entries (R crosses below –20 + all filters green).
- Optionally sets dynamic ATR-based stop-loss (1.5×ATR) and take-profit (2×ATR).
- Shows a dashboard box with current position, equity, PnL, filter status, and real-time Williams R / MA/volume values.
---
Backtest Summary (BTC/USD(Binance), 5 min, 24 Mar 2025 → 28 Apr 2025)
• Total P&L : +50.70 USD (+5.05 %)
• Max Drawdown : 31.93 USD (3.11 %)
• Total Trades : 198
• Win Rate : 55.05 % (109/89)
• Profit Factor : 1.288
• Commission : 0.01 % per trade
• Slippage : 0 ticks
Even in choppy March–April, this multi-filter approach nets +5 % with a robust risk profile, compared to –2.09 % and higher drawdown for Williams R alone.
---
Williams R Alone vs. Multi-Filter Version
• Total P&L :
– Williams R alone → –20.83 USD (–2.09 %)
– Multi-Filter → +50.70 USD (+5.05 %)
• Max Drawdown :
– Williams R alone → 62.13 USD (6.00 %)
– Multi-Filter → 31.93 USD (3.11 %)
• Total Trades : 543 vs. 198
• Win Rate : 60.22 % vs. 55.05 %
• Profit Factor : 0.943 vs. 1.288
---
Inputs & What They Control
- wrLen (14): Williams R look-back
- maType (EMA): Trend filter type (SMA, EMA, WMA, HMA)
- maLen (20): Moving-average period
- useChop (true): Toggle Choppiness Index filter
- ciLen (12): CI look-back length
- chopThr (38.2): CI threshold (below = trending)
- useVol (true): Toggle volume-above-average filter
- volMaLen (50): Volume MA period
- useBBW (false): Toggle Bollinger Band Width filter
- bbwMaLen (50): BBW MA period
- useST (false): Toggle Supertrend filter
- stAtrLen (10): Supertrend ATR length
- stFactor (3.0): Supertrend multiplier
- useSL (false): Toggle ATR-based SL/TP
- atrLen (14): ATR period for SL/TP
- slMult (1.5): SL = slMult × ATR
- tpMult (2.0): TP = tpMult × ATR
---
How to Read the Chart
- Blue arrow (Long): Williams R crosses above –80 + all enabled filters green
- Red arrow (Short) : Williams R crosses below –20 + all filters green
- Dashboard box:
- Top : position and equity
- Next : cumulative PnL in USD & %
- Middle : green/white dots for each filter (green=passing, white=disabled)
- Bottom : Williams R, MA, and volume current values
---
Usage Tips
- Add the script : Indicators → My Scripts → Williams R Zone Scalper v1.0 → Add to BTC/USD chart on 5 min.
- Defaults : Optimized for BTC/USD.
- Forex majors : Raise `chopThr` to ~42.
- Stocks/high-beta : Enable `useBBW`.
- Enable SL/TP : Toggle `useSL`; stop-loss = 1.5×ATR, take-profit = 2×ATR apply automatically.
---
Common Questions
- * Why not trade every Williams R reversal?*
Raw Williams R whipsaws in sideways markets. Choppiness and volume filters reduce false entries.
- *Can I use on 1 min or 15 min?*
Yes—adjust ATR length or thresholds accordingly. Defaults target 5 min scalping.
- *What if all filters are on?*
Fewer arrows, higher-quality signals. Expect ~10 % boost in average win size.
---
Disclaimer & License
Trading carries risk of loss. Use this script “as is” under the Mozilla Public License 2.0 (mozilla.org). Always backtest, paper-trade, and adjust risk settings to your own profile.
---
Credits & References
- Pine Script v6, using PulseWire’s built-in `ta.supertrend()`.
- PulseWire House Rules: www.pulsewire.com
Goodluck!
BullByte
Strategy
Indicator
