Market Structure with ATR trailing stop [EDGE]Market Structure with ATR trailing stop — Multi-Timeframe Structure + ATR Trailing Stop.
A precision market-structure tool that goes beyond a simple pivot indicator by combining SMC-style swing detection, multi-timeframe CHoCH/BOS tracking, and a school-standard ATR trailing stop — all adapted automatically to the chart timeframe.
How it works:
The indicator scans pivot highs and lows using an SMC-calibrated Length (automatically picked for the current timeframe or set manually). Each broken pivot is classified as CHoCH (character change, phase start) or BOS (continuation) using your chosen breakout method — Wick, Body, or 2-Close confirmation. The same logic is mirrored across D1, H4, H1 and M5 in a summary table, so you always see whether the higher timeframes agree with the current one.
What it calculates:
- Swing pivots with HH / HL / LH / LL classification (optional labels)
- CHoCH / BOS counter — "UP (C)", "UP (C+1)", "DOWN (C+2)" — showing phase maturity per timeframe
- Trend direction on D1 / H4 / H1 / M5 in one summary table
- ATR trailing stop with EMA basis and one-directional ratcheting
- Live ATR% with a dynamic percentile-based "normal range" window
- Distance to trailing stop in %
Key features:
- Auto Length by timeframe (SMC standard: M5 = 7, H1 = 15, H4 = 20, D1 = 30 …)
- Three breakout modes: Wick (early), Body (default), 2-Close (conservative)
- Auto ATR multiplier and EMA basis per timeframe — sourced from Raschke, Carter, Chandelier Exit, Minervini, Wilder and Weinstein school standards
- Multi-timeframe trend dashboard with CHoCH/BOS phase counter
- Dynamic ATR% range (percentile lookback) — instant read on whether volatility is normal, muted or hot
- Configurable trailing-stop history window (2 or 10 last ranges)
- Optional HH / HL / LH / LL swing labels
- Fully customizable up/down colors
- Built-in alerts: trend flip up, trend flip down, stop touch up, stop touch down
- Disabled on timeframes below 5M with an on-chart notice — the indicator is calibrated for 5M and above
Who it's for:
Traders who want a single, opinionated structure tool that reads the market the same way institutional and SMC playbooks do — with automatic parameters that respect every timeframe, a clean multi-TF dashboard, and a trailing stop built from real trading-school standards rather than arbitrary defaults. Indicator
VASA Position Size & ATR Stop vFMost blown accounts come down to one thing: size, not signal. This tool does the math the pros do before every trade. Tell it your account size and how much you're willing to risk on the trade (1% is a sane default), and it places a stop a set number of ATRs away, then tells you exactly how many units that risk budget allows.
What it does: • ATR-based stop distance, long or short • Position size from your account size and risk % • On-chart table: entry, stop, stop distance, dollar risk, units • Entry and stop lines drawn on the chart • No signals, nothing to repaint — it's a calculator
How to use: set your account size and risk % once. Pick your entry (defaults to the current close, or type one in). Read the position size off the table and use it. The idea is boring on purpose — fixed fractional risk is how you survive a losing streak long enough for your edge to show up. Plan from a closed bar so the ATR reading is settled.
Educational only — not financial advice. Position sizing does not remove market risk. Trading involves substantial risk of loss.
Indicator
cephxs / Risk Calculator [Pro +]Risk Calculator
Type your stop in ticks and the dollars you accept to lose. The table tells you how many contracts fit, and what those contracts actually risk.
WHAT IT DOES
Position sizing is the one calculation that decides whether a losing streak is survivable, and it is the one most people do in their head, wrong, on the way into a trade.
This is a manual sizer. Two inputs, one small table, nothing else on your chart. No signals, no boxes, no arrows, no alerts. It reads the symbol you are on, converts your stop from ticks into dollars, and reports how many contracts fit inside the risk you set.
It reports both the standard contract and its micro sibling, side by side, every time. There is no micro toggle to remember, because the choice between one mini and twelve micros is a trading decision, not a setting. This tool is calibrated specifically to Futures contracts, Updates will follow soon for support for Forex CFD Lots and instructions on how to understand them and speed up your trading for cross platform trading (externl execution and PulseWire charting for example.)
HOW IT WORKS
Three ideas, and the third is the one that gets sizers wrong.
1. Ticks, not points. You think in ticks, because that is what your stop is measured in on the DOM. Contract specifications are quoted per point . The script converts between them using the symbol's own tick size, so a 50-tick stop on CME_MINI:RTY1! (0.1 tick) and a 50-tick stop on CME_MINI:ES1! (0.25 tick) are correctly priced as different distances instead of being treated as the same number.
2. A contract pair, not a contract. The script carries a lookup of index, metal, energy and FX futures. Each entry stores the dollar value of a one-point move for the standard contract and for its micro. The same pair resolves whichever side of it you are charting: load CME_MINI:NQ1! or load CME_MINI:MNQ1! and you get the same two columns, in the same order. Micro tickers are matched before their standard root, so CME_MINI:MNQ1! is never mistaken for the CME_MINI:NQ1! entry.
3. Floor division, and no rounding up. Contract counts come from your risk budget divided by the dollar cost of one contract at your stop, rounded down . A partial contract is not a contract. This means the reported figures are never the budget read back at you — they are what the position genuinely risks, which is at or under the budget by the size of the remainder.
HOW TO READ THE TABLE
Four stacked rows. The example below is a 25-tick stop with a $400 budget on CME_MINI:ES1! (Same as the publication Screenshot):
ES1!
25 ticks
$313 / $375
1 mini / 12 micros
Row 1 — Asset. The symbol the numbers were computed for. Confirms the script resolved what you think it resolved.
Row 2 — Stop. Your stop, as typed.
Row 3 — Risk. What each position actually loses if the stop is hit.
Row 4 — Size. What to place.
Rows 3 and 4 are a pair and read column for column. Standard contract on the left, micro on the right. $313 is what that 1 mini risks. $375 is what those 12 micros risk. Both sit under the $400 budget. Neither is the budget itself.
The colors are the warnings.
Grey — normal. Both sides are tradeable.
Amber — one standard contract already exceeds your budget. Its count reads 0. Only the micro column is tradeable.
Red — even one micro exceeds your budget. Row 4 reads "Risk too big", and row 3 switches to showing what one of each contract would cost, so you can see how far over you are.
Every cell carries a tooltip with the full arithmetic: ticks, dollars per tick, dollars per contract, and the budget the counts were divided by. Hover it when a number surprises you.
HOW TO USE
Load it on the futures contract you trade.
Set Preferred Risk once. This is your per-trade loss limit in dollars, and it should not change trade to trade.
Before each entry, set Stop Size to where your stop actually goes — below the swing, past the level, wherever your method puts it. Do not pick the stop that makes the size convenient.
Read row 4 and place that size.
If the block turns red, the trade is not untradeable — the stop is too wide for your account at this risk. Wait for a tighter structure rather than moving the stop in.
The order matters. Risk is fixed, stop is dictated by the chart, and size is the output of those two. Sizing first and then hunting for a stop that fits is the habit this table exists to break.
INPUTS
Stop Size (ticks): 25. Distance to your stop, in ticks. Drives everything. Fully customizable.
Preferred Risk ( AMEX:USD ): 400. Maximum dollars you accept to lose. Both contract counts stay at or below it. Add a small leeway $50 if you're willing to get even closer to your preferred risk.
Table Position: Bottom Left. Any of the nine pane anchors.
Layout: Values Only, or Labeled (adds a dimmed caption column).
Text Align: Left, Center, Right. Applies to the value column.
Edge Padding (rows): 2. Blank rows between the block and the pane edge it hugs. Inert on the three Middle positions, which have no edge to lift off.
Text / Warn / Error colors: the three states above, in that order.
Table Text Size: Standard. Compact through Extra Large, or Auto.
The table draws as plain text with no background and no border, so it sits on the chart without covering price.
SYMBOLS COVERED
Indices: CME_MINI:NQ1! · CME_MINI:MNQ1! · CME_MINI:ES1! · CME_MINI:MES1! · CBOT_MINI:YM1! · CBOT_MINI:MYM1! · CME_MINI:RTY1! · CME_MINI:M2K1!
Metals: COMEX:GC1! · COMEX_MINI:MGC1! · COMEX:SI1! · COMEX_MINI:SIL1! · COMEX:HG1! · COMEX_MINI:MHG1!
Energy: NYMEX:CL1! · NYMEX:MCL1! · NYMEX:RB1! · NYMEX:HO1!
FX: CME:6E1! · CME_MINI:M6E1! · CME:6B1! · CME_MINI:M6B1! · CME:6C1! ·
NYMEX:RB1! and NYMEX:HO1! have no micro, so they report a single column. Every other symbol reports the pair.
LIMITS — read these
It does not know your account. There is no balance, no margin check, no daily loss limit. If your broker's day-trade margin will not carry 12 micros, the table will still say 12. That number is what your risk allows, not what your buying power allows.
It does not know your position. It is a pre-trade calculator, not a position tracker. It never reads open orders or fills.
Commissions and fees are excluded. Twelve micros cost meaningfully more in round-turn fees than one mini for the same risk. That gap is real and this table does not show it.
Off-list symbols degrade, they do not fail. On anything outside the list above, the script falls back to the symbol's own point value, finds no sibling, and collapses to a single column labeled in plain "contracts". Stocks, crypto and forex spot will produce a number this way. Confirm it against your broker before you trade it.
Futures-first by design. The tick-to-dollar chain assumes a contract with a fixed point value. It is not a share sizer.
No performance claim is made or implied. Correct sizing controls the size of a loss. It does not make a losing setup profitable.
FAQ
why does it show both minis and micros instead of picking one?
Because the right answer depends on what you are doing, not on the arithmetic. Twelve micros let you scale out in twelve pieces and cost more in fees. One mini is cheaper and all-or-nothing. The table gives you both and stays out of the decision.
why is the risk figure lower than my preferred risk?
Rounding down. If one contract costs $400 and your budget is $500, one contract fits and $100 goes unused, because 1.25 contracts do not exist. The figure shown is the real risk of the real position.
it says "Risk too big" — is something broken?
No. One micro at your current stop costs more than your entire budget. Either the stop is wider than your account can carry at that risk, or the risk input is set low. Row 3 shows what one of each contract would cost, so you can see the gap.
does it repaint?
There is nothing to repaint. The table is computed on the last bar from your two inputs and the symbol's specification. It uses no history, no higher timeframe requests and no future data.
my broker's contract value differs from the table.
Trust your broker. Contract specifications change and exchanges list variants. The tooltip shows the exact dollars-per-tick used, so you can compare in one look.
DISCLAIMER
This script is a calculator. It gives no trade signals and makes no forecast. Contract specifications are hardcoded and can become out of date, and off-list symbols use a fallback value — always confirm the numbers against your broker before you place an order. Trading futures involves substantial risk of loss and is not suitable for every investor. Nothing here is financial advice.
Open source under the Mozilla Public License 2.0. Read the code, fork it, change the contract table to suit your instruments.
Indicator
Khabib Takedown Fractal Nest Breakdown ViprasolKhabib Takedown — Fractal Nest Breakdown 🤼
CONCEPT
This tool looks for SELF-SIMILARITY in a decline: a big bearish leg (lower high -> lower low)
with a smaller bearish leg nested inside it that is a scaled copy — same shape, a fraction of
the size. When the small "fractal" completes in the direction of the big one (a break of the
last low), the structure grounds price -> SHORT. It is a fractal-echo measurement, not a plain
lower-low. The nesting ratio between the small leg and the big leg is the core filter.
HOW IT DETECTS
- Swings are found with confirmed pivot highs/lows (left/right bar lookback) and chained into a
lightweight zigzag.
- The tool reads the last four alternating swings (high, low, high, low).
- Big leg = first high minus first low; small leg = second high minus second low.
- A valid nest requires: lower high and lower low (bearish structure); big leg >= (Min big x ATR);
small leg positive; and the nesting ratio (small/big) inside the band .
- The signal fires when price closes below the most recent swing low and the bar closes red.
- ATR (Wilder) scales the minimum big-leg size across instruments and timeframes.
ENTRY / STOP / TARGET
- Entry: SHORT on the close of the confirming (red) bar that breaks the last low.
- Stop: above the second (inner) swing high plus an ATR buffer (default 0.3 x ATR).
- Target: entry minus R multiple x risk (default 2R, where risk = stop distance).
- The script draws the big leg and the nested small leg, plus filled TP and SL zones that extend
to the right until price touches one of them.
NON-REPAINTING
Pivots are only used once fully confirmed (they require the right-side bars), and the signal is
evaluated on bar close (barstate.isconfirmed). Drawings are created on the confirmed bar. The tool
does not repaint completed signals. Live, the forming bar can still change until it closes, as with
any bar-close tool.
FEATURES
- Fractal nesting (scaled self-similar legs), not a plain lower-low break.
- ATR-scaled minimum big-leg requirement and adjustable nesting-ratio band.
- Automatic R-multiple TP and ATR-buffered SL, drawn as zones that extend until hit.
- One-trade-at-a-time option and a minimum-bars-between-signals gap to reduce clustering.
- On-chart status table (open trades) and an alertcondition for automation.
INPUTS OVERVIEW
- Swing pivot left/right bars: swing sensitivity.
- Nesting ratio band (ratLo/ratHi): how close in scale the small leg must be to the big leg.
- Min big leg (x ATR) and ATR length: minimum move and volatility scaling.
- TP R multiple, SL buffer (x ATR), min bars between signals, one-trade-at-a-time.
- Visual colors, label offset, and zone transparency.
HOW TO USE
1. Add to any liquid symbol and timeframe; start with defaults.
2. Tighten the nesting-ratio band for stricter self-similarity, or widen it for more signals.
3. Raise Min big leg (x ATR) to demand larger, cleaner declines before a nest counts.
4. Use the drawn TP/SL zones for context; set an alert on the signal for hands-off monitoring.
5. Combine with your own trend/context read before acting.
LIMITATIONS
- This is a pattern/education tool, not a signal service, and not financial advice.
- Breakdown patterns fail; nesting geometry is a filter, not a guarantee. Losing signals will occur.
- Pivot confirmation adds inherent lag (it needs bars to the right of a swing to confirm).
- Very choppy or illiquid markets can produce misshapen legs and weak signals.
- Requires user discretion, risk management, and position sizing. No performance is implied.
CREDITS
The name is an inspirational sports homage only; it does not imply any endorsement or affiliation.
ATR uses Wilder's average true range. Pivot/zigzag swing detection uses standard public techniques.
The fractal-nest (scaled self-similar leg) geometry, the detection assembly, and the trade/zone
visualization are original Viprasol work.
Original Viprasol work; no third-party Pine code reused.
Indicator
Entry-to-Exit ToolA realtime non-repainting entry-to-exit analysis tool that retains a Provisional or Finalized BUY/SELL entry reference and resolves it through an opposite signal, confirmed terminal invalidation, minimum-profit target, or entry-terminal risk/reward target. The displayed exits are analytical reference events and are not a guarantee of profitability or future performance.
Name:
Entry-to-Exit Tool
Searchable Name:
Realtime Non-Repainting Entry Exit Target and Risk Reward Tool
Technical Name:
Realtime Non-Repainting Provisional Finalized Entry Reference Opposite Signal Terminal Break Profit Target and Risk Reward Exit Resolution Tool
Short title:
Trade Exit Tool
Summary
Entry-to-Exit Tool is an exit-resolution indicator that converts internally generated Provisional or Finalized BUY/SELL signals into retained entry references and then identifies where those references would resolve under a selected exit method.
The script does not require signals from another indicator. It contains its own causal transform-path signals, structural resolver, Provisional signal ledger, and Finalized signal ledger. The user selects which internally generated signal stage establishes the entry reference and which stage can later provide an opposite-signal exit.
Each retained entry reference stores:
direction
confirmation bar
confirmation price
retained terminal price
The reference remains active until one enabled exit condition resolves it.
Available exit conditions include:
selected opposite BUY/SELL signal
confirmed close through the retained entry terminal
fixed minimum-profit target
entry-terminal risk/reward target
Opposite-signal exits, terminal exits, fixed-profit targets, and risk/reward targets remain separate exit identities. The script records the exit bar, exit price, resolved direction, and exit reason without rewriting the completed record after later chart history arrives.
This is not a complete strategy or automated trade-management engine. It does not submit orders, calculate position quantities, reverse broker positions, calculate complete strategy profitability, manage a portfolio, or route executable instructions. Its purpose is to show structured entry-to-exit reference behavior from the script’s own causal signal records.
How it works
The script first produces two internally retained signal stages:
Provisional
Finalized
The selected Entry Reference Stage determines which signal stage opens a retained entry reference.
The selected Opposite Exit Signal Stage determines which signal stage can later resolve that reference through an opposite BUY or SELL confirmation.
These two stages can be selected independently.
For example, a user can choose:
Provisional entry with Provisional opposite exit
Provisional entry with Finalized opposite exit
Finalized entry with Provisional opposite exit
Finalized entry with Finalized opposite exit
The script then processes entry-reference events and opposite-exit events in chronological order.
When both event streams contain an event on the same bar, the exit-stage event is processed before the entry-stage event. This prevents the new same-bar entry event from being incorrectly treated as active before the earlier reference has had a chance to resolve.
Provisional entry references
A Provisional entry reference is established from an accepted causal transform-path-agreed BUY or SELL confirmation.
Provisional confirmation requires the candidate direction to agree with the stored causal transform-reference direction.
A retained transform candidate can confirm:
on its candidate bar
or on the following closed bar
The maximum signal confirmation delay is limited to zero or one bar.
When Active Path-Filtered Candidate Memory is enabled, a valid candidate that initially fails transform-path direction agreement can remain stored. It can later confirm on the first closed bar where the retained candidate terminal agrees with the active causal transform direction.
That later passing bar becomes the actual Provisional confirmation bar and entry-reference price.
A Provisional signal is earlier than a Finalized signal, but it has not yet completed structural finalization. It can still be replaced, superseded, or fail to become the retained Finalized identity of its structural swing.
Finalized entry references
A Finalized entry reference is established from a Provisional signal that survives the selected structural resolver.
Finalized identity requires structural completion of the containing swing.
The Finalized reference uses:
the retained structural BUY or SELL identity
the Finalized confirmation bar
the Finalized confirmation price
the retained structural terminal price
Finalized references generally occur later than Provisional references, but they represent the signal identity retained after structural resolution.
Structural events classify and finalize signal identity. They do not independently create the Provisional BUY/SELL signal universe.
Entry-reference behavior
Only one entry reference can remain active at a time.
When no reference is active, the next qualifying event from the selected Entry Reference Stage establishes a new reference.
The reference retains:
long or short direction
entry confirmation bar
entry confirmation price
terminal price associated with that entry identity
The script does not continuously replace an unresolved reference with later same-side entry signals.
A new entry reference is committed only after the prior reference has resolved and the script is flat at the reference-state level.
The reference is an analytical state retained by the indicator. It is not a broker position and does not contain position size or account information.
Exit Resolution Method
The user selects one of three primary exit-resolution methods:
Opposite Signal
Entry Terminal Break
Opposite Or Terminal Break
Target exits are controlled separately and can operate alongside the selected primary exit method.
Opposite Signal
Opposite Signal resolves the active entry reference when the selected opposite signal stage confirms.
For a long reference, the selected SELL signal is the opposite event.
For a short reference, the selected BUY signal is the opposite event.
The opposite event uses the stage selected under Opposite Exit Signal Stage:
Provisional
or Finalized
The exit occurs at that opposite event’s confirmation price.
An opposite signal that does not oppose the currently active direction does not resolve the reference.
Require Profit For Opposite Exit
Require Profit For Opposite Exit applies only to opposite-signal exits.
When disabled, every qualifying opposite signal can resolve the active reference.
When enabled, the opposite signal resolves the reference only when the raw-price return from the retained entry price to the opposite confirmation price is at least the selected Minimum Profit For Opposite Exit percentage.
For a long reference, profit requires the opposite exit price to be sufficiently above the entry price.
For a short reference, profit requires the opposite exit price to be sufficiently below the entry price.
This setting does not delay or block:
Entry Terminal Break
Minimum Profit Target
Risk/Reward Target
An unprofitable opposite signal can therefore be ignored while another enabled exit condition remains active.
Minimum Profit For Opposite Exit is a gate on an opposite signal. It is not the same as the independent Minimum Profit Target exit.
Entry Terminal Break
Entry Terminal Break resolves the active reference when a confirmed close invalidates the retained entry terminal.
For a long reference:
a confirmed close below the retained terminal resolves the reference
For a short reference:
a confirmed close above the retained terminal resolves the reference
The terminal is taken from the same signal identity that established the entry reference.
The terminal is not replaced by every later support, resistance, pivot, or same-side signal.
Terminal exits use confirmed closes only.
An intrabar move through the terminal that does not remain broken at the confirmed close does not create a terminal exit under this script.
Opposite Or Terminal Break
Opposite Or Terminal Break enables both primary exit conditions.
The reference resolves on whichever valid event occurs first:
a qualifying opposite signal
or a confirmed terminal invalidation
When Require Profit For Opposite Exit is enabled, an opposite signal that does not meet the profit requirement is not treated as a valid exit. The terminal condition remains active and can still resolve the reference.
Target Exit
Target Exit is independent from the selected primary Exit Resolution Method.
Available target modes are:
Off
Minimum Profit %
Risk/Reward
When Target Exit is Off, no target price is calculated and no target exit can resolve the reference.
The status table displays:
OFF when the target mode is disabled
n/a when no entry reference is active
unavailable when a Risk/Reward target cannot be formed
the calculated target price when a valid active target exists
Minimum Profit Target
Minimum Profit % creates a fixed target from the retained entry-reference price.
For a long reference:
Target Price = Entry Price × (1 + Minimum Profit Target %)
For a short reference:
Target Price = Entry Price × (1 − Minimum Profit Target %)
The reference resolves when a confirmed close reaches or passes the calculated target.
For a long reference:
the confirmed close must be at or above the target
For a short reference:
the confirmed close must be at or below the target
The exit label is recorded as:
PROFIT TARGET
This target operates independently from Require Profit For Opposite Exit.
The two settings serve different purposes:
Minimum Profit For Opposite Exit controls whether an opposite signal is allowed to exit
Minimum Profit Target creates an independent price level that can exit without an opposite signal
Risk/Reward Target
Risk/Reward creates a target from the distance between the retained entry price and the retained entry terminal.
For a long reference:
Risk Distance = Entry Price − Retained Terminal
Target Price = Entry Price + Risk Distance × Risk/Reward Multiple
For a short reference:
Risk Distance = Retained Terminal − Entry Price
Target Price = Entry Price − Risk Distance × Risk/Reward Multiple
The target is valid only when the retained terminal is on the correct defensive side of the entry price and the resulting risk distance is positive.
For a long reference, the terminal must be below the entry price.
For a short reference, the terminal must be above the entry price.
When the terminal does not produce a positive risk distance, the Risk/Reward target is unavailable. The script does not invent a target by using an absolute distance or moving the terminal to the other side of the entry.
The reference resolves when a confirmed close reaches or passes the valid calculated target.
The exit label is recorded as:
RISK/REWARD TARGET
Confirmed-close target behavior
Both target modes use confirmed closes.
The script does not assume execution at the exact target price when price crosses the target intrabar.
The recorded exit price is the confirmed close of the bar that first satisfies the target condition.
This makes target resolution consistent with the script’s confirmed-close terminal-break behavior.
When a terminal break and target hit are both visible during the same scanned bar, terminal invalidation is given resolution priority in the code and the event is recorded as:
TERMINAL EXIT
Exit identities
The script preserves four separate exit identities:
OPPOSITE EXIT
TERMINAL EXIT
PROFIT TARGET
RISK/REWARD TARGET
These identities are not merged into one generic EXIT label.
This allows the user to distinguish whether the reference resolved because:
an opposite signal confirmed
the retained terminal failed
a fixed percentage target was reached
or the selected risk/reward target was reached
Completed exit records retain:
resolved direction
exit bar
exit price
exit reason
Later chart history does not move the completed exit to a different bar or change its recorded reason.
Signal construction
The internal signal engine uses a causal transform-reference path built from loaded raw-price records.
The transform path is used as a mandatory direction-agreement source for Provisional BUY and SELL confirmation.
The script separately maintains:
raw price arrays
transform path arrays
close, high, and low replay arrays
Provisional signal ledgers
Finalized signal ledgers
structural event ledgers
The transform path and structural resolver remain separate systems.
The transform path confirms Provisional signal direction.
The structural resolver determines which Provisional identity survives into the Finalized ledger.
A structural event does not directly create an entry reference unless Finalized is selected as the Entry Reference Stage and the corresponding Finalized signal record exists.
Transform Path Capturable Segment
Transform Path Capturable Segment percentage controls the captured movement required by the internal transform-reference path.
It is used to retain broader directional legs and reject smaller path pivots.
The setting affects transform-path construction and therefore can affect which candidates pass mandatory path agreement.
It is not an exit target and does not define minimum trade profit.
Structural resolution
The script includes three structural resolver options:
Earliest Terminal
Original Grouping
Conditional Accelerated
Original Grouping is the default.
Earliest Terminal
Earliest Terminal follows the known-prefix earliest terminal chain.
It is intended to retain the earliest causally provable structural terminal under the solver’s rules.
Original Grouping
Original Grouping retains same-side structural candidates as a group.
A later same-side candidate can replace the retained group extreme before an opposite structural candidate resolves the group.
The retained extreme becomes the finalized structural identity when the opposite side completes the structural transition.
Conditional Accelerated
Conditional Accelerated uses captured-path potential after structural proof.
The Structural Capturable Segment percentage applies only to this resolver.
It does not directly filter transform BUY/SELL events or calculate exit targets.
Structural records are prefix-stable and are committed permanently after confirmation.
Structural path and signal context
The script can display:
structural change labels
structural resolution path
Finalized transform BUY/SELL labels
Provisional Candidate signals
failed or superseded Provisional signals
path-disagreed Candidate labels
current live Candidate
live transform-reference path
confirmed support and resistance
These context displays do not change the selected entry-reference stage or exit-resolution method.
Turning a display off hides the object but does not remove its underlying retained ledger.
Entry and exit displays
Entry Reference Markers
Optional Entry Reference Markers show where the selected Provisional or Finalized entry reference was established.
These markers are display-only and do not represent submitted orders.
Resolved Exit Labels
Resolved Exit Labels show completed exit events.
Each label includes the exit identity determined by the resolution condition.
The script limits retained exit labels through the Maximum Exit Labels input.
Older labels are deleted from the chart when the display limit is exceeded. Their removal from the chart does not alter the chronological exit reconstruction used to determine the current active reference.
Active entry level
When Show Active Entry / Terminal Levels is enabled, the active entry confirmation price is displayed as a blue dotted line.
The line starts from the retained entry-reference bar and extends to the right while the reference remains active.
Active terminal level
When terminal-based resolution is enabled, the retained terminal is displayed as an orange dashed line.
For a long reference, this is the price below which a confirmed close produces a terminal exit.
For a short reference, this is the price above which a confirmed close produces a terminal exit.
Active target level
When a valid target mode is enabled, the target is displayed as a green dashed line.
The line appears only when:
an entry reference is active
the selected target mode is not Off
and the target calculation produces a valid price
Minimum Profit % generally produces a target whenever a valid entry price exists.
Risk/Reward requires a valid positive entry-to-terminal risk distance.
Support and resistance
Optional support and resistance levels are derived from confirmed signal terminals.
The user can:
show or hide the levels
extend the levels right
keep or remove broken levels
change line width
control the maximum number of managed chart objects
These levels provide contextual market structure.
They do not replace the retained entry terminal used by the exit-resolution module.
Replay and chronological reconstruction
The script reconstructs the entry-to-exit state from historical Provisional and Finalized signal ledgers.
The selected entry-stage ledger and selected opposite-stage ledger are merged chronologically.
The merge is linear rather than repeatedly sorting the complete combined event list.
This allows the script to preserve event order while avoiding the unnecessary quadratic event sorting that would become increasingly expensive as the number of signal records grows.
For each historical interval, the script checks:
whether the active retained terminal was invalidated
whether an enabled target was reached
whether a qualifying opposite event occurred
whether a new entry reference should be committed after the previous reference resolved
The reconstructed active state at chart end determines:
current active direction
entry price
retained terminal
target price
last exit reason
last exit bar
last exit price
Same-bar event priority
When an entry-stage event and exit-stage event occur on the same bar, the exit-stage event is processed first.
This preserves the prior active reference’s opportunity to resolve before a new reference from the same bar is committed.
It also prevents a newly created same-bar reference from being immediately interpreted as though it existed before the opposite event that appears at the same timestamp.
Performance controls
The script includes:
Statistics-Only Replay
Maximum Replay Objects
Auto Limit Live Replay
Live Replay Bars
Statistics-Only Replay reduces historical chart-object construction while retaining internal calculations.
Maximum Replay Objects limits the number of displayed historical objects.
Auto Limit Live Replay and Live Replay Bars can reduce the amount of live historical drawing on large charts.
These settings primarily control display and replay workload. They do not change the configured exit formulas.
Status pages
The status table includes separate pages for:
Exit State
Signals
Structural
Support/Resistance
Alerts
Guide
Exit State
The Exit State page displays:
selected Entry Stage
selected Opposite Stage
selected Resolution Method
active direction
entry price
retained terminal
last resolution reason
last exit bar
last exit price
selected Target Exit mode
current target price
Target-price display behavior is:
OFF when target exits are disabled
n/a when no reference is active
unavailable when a Risk/Reward target cannot be formed
the formatted target price when the target is valid
Signals
The Signals page summarizes the internal Provisional and Finalized signal state and selected signal context.
Structural
The Structural page displays selected structural resolver information and structural event context.
Support/Resistance
The Support/Resistance page displays level configuration and retained level state.
Alerts
The Alerts page shows whether resolved exit alerts are enabled and whether the current reconstruction produced a long-reference or short-reference exit event.
Guide
The Guide page explains the main output identities and chart-line colors:
retained entry reference
selected-stage opposite exit
confirmed terminal invalidation
target resolution
blue entry line
orange terminal line
green target line
Alerts
The script contains informational alerts for:
Provisional Transform BUY
Provisional Transform SELL
Finalized Transform BUY
Finalized Transform SELL
Long Reference Exit
Short Reference Exit
Provisional alerts are generated from accepted transform-path-agreed Provisional events.
Finalized alerts are generated when structural resolution commits a Finalized BUY or SELL identity.
Exit alerts identify whether a long or short entry reference resolved.
The exit alert title does not distinguish the exact reason in separate alertconditions. The exact chart label and status-table Last Resolution field identify whether the reconstructed exit was:
OPPOSITE EXIT
TERMINAL EXIT
PROFIT TARGET
RISK/REWARD TARGET
Alerts are informational.
They do not contain:
position size
broker account information
order type
stop order
limit order
routing destination
portfolio instruction
or guaranteed execution price
Important behavior note
The script should be understood as:
causal in its signal confirmation
historically stable after closed-bar confirmation
reconstructed chronologically from retained signal ledgers
live-updating only for current open-bar signal and path context
Closed-bar Provisional signals, Finalized signals, entry references, and completed exits are not moved or reclassified by later chart history.
The current open bar can update only the existing live Candidate and transform-reference context inherited from the internal signal engine.
Terminal and target exits use confirmed closes only.
The tool identifies analytical entry-to-exit reference events. It does not confirm that a real order was filled at the displayed price.
Features
Internally generated Provisional BUY/SELL signals
Internally generated Finalized BUY/SELL signals
Selectable Provisional or Finalized Entry Reference Stage
Selectable Provisional or Finalized Opposite Exit Signal Stage
Opposite Signal exit method
Entry Terminal Break exit method
Combined Opposite Or Terminal Break method
Optional profit requirement for opposite exits
Independent Minimum Profit Target
Independent Risk/Reward Target
Entry-to-terminal risk calculation
Confirmed-close target resolution
Confirmed-close terminal invalidation
Separate opposite, terminal, profit-target, and risk/reward exit identities
One retained active entry reference
Chronological entry and exit event reconstruction
Exit-first same-bar event ordering
Linear two-ledger event merge
Permanent closed-bar entry and exit records
Active entry price line
Active retained terminal line
Active target price line
Entry-reference markers
Resolved exit labels
Maximum retained exit-label control
Three selectable structural resolvers
Mandatory causal transform-path agreement
Candidate-bar or next-bar Provisional confirmation
Stored path-filtered Candidate memory
Provisional and Finalized signal ledgers
Failed and superseded Provisional context
Optional structural path
Optional live transform-reference path
Optional support and resistance
Replay and chart-object performance controls
Multiple status-table pages
Informational signal alerts
Informational long-reference and short-reference exit alerts
Strengths
Self-Contained Signal Source — generates its own Provisional and Finalized entry references without requiring another script’s external signal input.
Entry-to-Exit Structure — converts internal BUY/SELL identities into a retained reference with a clearly defined entry price, terminal, target, and exit reason.
Stage Flexibility — allows the entry stage and opposite exit stage to be selected independently.
Exit Method Flexibility — supports opposite confirmation, terminal invalidation, or whichever valid event occurs first.
Independent Target Logic — fixed-profit and risk/reward targets can resolve the reference without waiting for an opposite signal.
Opposite Profit Gate — can prevent an unprofitable opposite signal from resolving the reference while leaving terminal and target exits active.
Identity Separation — opposite, terminal, fixed-profit, and risk/reward exits remain distinguishable.
Terminal Consistency — uses the terminal retained by the same signal identity that established the entry reference.
Confirmed-Close Stability — terminal and target exits do not depend on unfinished intrabar movement.
Chronological Reconstruction — historical state is rebuilt in event order rather than inferred only from the latest signal.
Same-Bar Ordering — exit-stage processing precedes entry-stage processing when both events occur on the same bar.
Performance-Aware Merge — merges already chronological signal ledgers directly instead of repeatedly sorting a combined event array.
Long and Short Symmetry — applies entry, opposite, terminal, and target calculations to both long and short references.
Visual Clarity — separates entry price, terminal price, and target price with distinct chart lines.
Context Availability — retains optional Provisional, Finalized, structural, path, and support/resistance displays.
Weaknesses
Signal Dependence — exit quality depends on the quality and timing of the internally generated Provisional or Finalized entry reference.
No Universal Best Stage — Provisional entries are earlier but less structurally resolved; Finalized entries are more confirmed but later.
Confirmed-Close Delay — terminal and target exits can occur later than an intrabar crossing.
Close-Price Exit Recording — the recorded exit price is the confirmation-bar close, not necessarily the exact target or terminal price touched intrabar.
No Partial Exits — each retained reference resolves as one complete analytical state rather than splitting into multiple exit quantities.
No Trailing Target — the fixed-profit and risk/reward targets do not trail favorable movement.
Static Entry Terminal — the retained terminal belongs to the entry identity and is not dynamically replaced with every later structural level.
Risk/Reward Availability — a risk/reward target cannot be formed when the retained terminal is not on the correct defensive side of the entry price.
Opposite Profit-Gate Persistence — an opposite signal that fails the profit gate is ignored rather than stored as a pending opposite exit.
No Complete Strategy Return — the tool does not calculate commissions, slippage, quantity, capital allocation, or portfolio equity.
No Broker Execution — displayed exits and alerts do not prove that a real order would fill at the same price.
One Active Reference — the script does not maintain simultaneous independent long and short references or multiple scaled entries.
Historical Reconstruction Cost — although the event merge is linear, the script still performs substantial transform, structural, replay, and chart-object work on large charts.
Parameter Sensitivity — transform capture, structural solver, entry stage, opposite stage, target percentage, and reward multiple can materially change results.
No Universal Profitability — structured exits do not guarantee that the underlying entries have sufficient predictive edge.
Who it’s for
This tool is best suited for:
PulseWire users who want an exit-focused companion to transform-based entry signals
traders comparing Provisional and Finalized entry timing
users studying opposite-signal exit timing
users testing retained-terminal invalidation
users testing fixed minimum-profit targets
users testing entry-terminal risk/reward targets
reversal and market-structure traders
users who want long and short exit references
users who want historically stable closed-bar exit labels
users who want one retained entry reference at a time
users interested in causal transform-path agreement
users developing an exit framework before integrating position sizing or routing
research-oriented users comparing multiple exit identities
users who want chart-based exit analysis without a complete strategy engine
Who it’s not for
This tool is not best suited for:
users looking for guaranteed profitable exits
users expecting the script to know the best future exit in advance
users looking for automatic broker execution
users requiring position sizing or account-risk calculations
users requiring partial profit taking
users requiring multiple simultaneous entries
users requiring dynamic trailing stops
users requiring intrabar target or stop execution
users expecting target price to guarantee actual fill price
users wanting complete strategy-equity reconstruction
users wanting commissions, slippage, leverage, or margin modeling
users expecting Provisional or Finalized signals to universally identify profitable trades
users seeking a complete operational transform engine with split quantities, portfolio state, or order routing
Known limitations
The tool is better at:
retaining a consistent entry reference
showing multiple structured exit conditions
distinguishing why an exit occurred
comparing Provisional and Finalized signal stages
visualizing entry, terminal, and target prices
and reconstructing closed-bar entry-to-exit state
than it is at:
predicting which entry will succeed
guaranteeing that a selected target will be reached
guaranteeing that a terminal exit will contain loss
finding the best possible future exit
or reproducing real broker fills
A fixed-profit target can improve consistency but can also exit before a larger move develops.
A risk/reward target can align the target with entry-terminal distance, but the retained terminal may not represent the user’s actual financial risk or intended stop placement.
An opposite signal can respond to changing structure, but it can arrive late or be ignored when Require Profit For Opposite Exit is enabled and the profit requirement is not met.
A terminal exit can preserve the entry identity’s invalidation point, but confirmed-close evaluation can exit beyond the terminal after a fast move.
These are structural exit references, not guarantees of favorable trade outcomes.
Final note
Entry-to-Exit Tool is a focused indicator for converting internally generated Provisional or Finalized BUY/SELL signals into retained entry references and resolving those references through explicitly defined exit conditions.
Its main value is not that it predicts the perfect exit. Its value is that it makes the exit framework visible and consistent:
which stage opened the reference
which stage can provide the opposite exit
which terminal belongs to the entry
whether an opposite exit requires profit
whether a fixed or risk/reward target is active
which condition actually resolved the reference
and where that resolution occurred on a confirmed close
The tool should be viewed as an entry-to-exit analysis layer, not as a complete strategy, broker-execution system, or guarantee of profitability.
It provides more structured exit information than an entry-only signal script while stopping before quantities, partial positions, portfolio state, order routing, and full operational trade management. Indicator
Indicator
ATR Risk Lattice - Position Size QuantizationA position-size calculator answers one question: given equity, a risk percentage and a stop
distance, how many units should I buy? The answer comes back fractional - 3.47 contracts, 118.6
shares - and the trader rounds it. This script is about what that rounding does to the risk you
actually carry.
THE PRINCIPLE
Position size is quantized. A broker sells whole contracts, or whole shares, or units of 0.01. So
the set of risk levels available to you is not continuous. It is a ladder, and the spacing between
two adjacent rungs is:
one size increment x (ATR multiple x ATR) x point value / equity
Every rung is a position you can hold. Everything between two rungs is a position you cannot hold.
The unrounded size almost never lands on a rung, so the risk you end up carrying is the rung you
rounded to, not the target you typed into the settings.
Two consequences follow, and both are invisible in a tool that prints a single size number:
1. When the account is small relative to the instrument, the ladder is coarse. On a
large-multiplier futures contract, adjacent rungs can sit more than a full percent of equity
apart, which means a 1% target is not reachable at all. The real choice is between no position and
one that risks considerably more than intended.
2. The ladder is not fixed. Its spacing is proportional to ATR, so as volatility expands the rungs
spread apart and risk control becomes coarser without anything in the setup changing.
WHAT IS PLOTTED
The pane plots realized risk as a percentage of equity after rounding, together with the two rungs
that bracket the unrounded size. The shaded band between those two lines is the range you are
forced to choose within. The dashed line is your target. When the band is narrow relative to the
target line, sizing is fine-grained. When it is wide, the sizing decision is dominated by
granularity rather than by your risk setting.
The line turns amber when one size increment moves realized risk by more than a configurable share
of your target - 25% by default.
HOW TO READ THE TABLE
The table reports the current bar. ATR and the timeframe and smoothing it came from; stop distance
in price and in ticks; the long and short stop levels measured from the current close; currency
risk per unit; target risk in percent and in currency; the unrounded size; the rounded size;
realized risk after rounding in percent and currency; the rung below and the rung above with their
risk levels; the ladder step, meaning how much realized risk moves per one size increment; and the
ladder step expressed as a percentage of your target, labelled fine or coarse.
The bottom row prints the opening timestamp of the bar the ATR was taken from, so the timing claim
below can be checked on the chart rather than taken on trust.
HIGHER-TIMEFRAME VOLATILITY
Risk is often managed on a slower timeframe than the one being watched. The script can take ATR
from a higher timeframe using a single bundled request. The requested expression is offset by one
bar and the request uses lookahead, which is the pair the Pine Script documentation specifies for
confirmed higher-timeframe values: the offset discards the bar that is still forming and returns
the one before it, which was already final when the current higher-timeframe bar opened.
Historical and realtime bars therefore produce the same value, and the timestamp in the table is
the opening time of the bar that value came from.
If the selected timeframe is at or below the chart timeframe, the table says so instead of quietly
returning something that is not a higher-timeframe value.
When ATR is taken from the chart timeframe instead - the default - it includes the bar currently
forming, so the last plotted value moves until that bar closes. Values on closed bars do not
change.
SETTINGS WORTH SETTING CAREFULLY
Minimum size increment. This sets the ladder spacing and is the input the whole tool turns on. Use
1 for futures and standard share accounts, and your broker's actual minimum for crypto or
fractional shares.
Point value. Defaults to the symbol's exchange multiplier via syminfo.pointvalue. That value is 1
for most equities and the contract multiplier for futures, but it is not what every broker
applies, and on forex and CFDs it will usually need to be overridden manually.
Account equity. Entered in the instrument's quote currency. No FX conversion is performed.
Rounding. Round down keeps realized risk at or below target. Round up does the opposite. Round to
nearest sends an exact half-step upward.
LIMITATIONS
The calculation assumes the stop fills at the stop price. It does not, on gaps, on halts, or in
thin books, so a realized loss can exceed the figure shown. It ignores commissions, financing,
slippage and margin requirements, any of which can make a rung unreachable for reasons this script
knows nothing about. It is a single-position calculator: it does not aggregate exposure across
open trades or correlated instruments. ATR is a description of recent range, not a forecast of it.
On non-standard chart types the true range is computed from synthetic bars rather than from traded
prices, so the ladder will describe the synthetic series.
This is a measurement and planning aid. It produces no entries, no exits and no signals, it makes
no claim about any method being sound or unsound, and there is nothing here to optimize. The
source is open, so every number in the table can be traced to the line that produced it. Indicator
Indicator
Risk Guard - Position Size & Risk CeilingWhat it does
Risk Guard sizes your position from the risk you are willing to take, and tells you immediately when that risk goes above the limit you set for yourself.
Most position size calculators stop at the arithmetic. This one adds the part that actually protects an account: a ceiling.
Why a ceiling
Many traders do not use a fixed risk per trade. They size up on strong setups and down on weak ones. That flexibility is fine, until one trade quietly goes far beyond what the account can absorb.
Risk Guard separates the two:
- Risk for THIS trade is what you are taking right now, and it can change every time.
- Your risk ceiling is your rule, and it does not change.
When the first goes above the second, the table switches to the alert colour and says so plainly.
How to use it
1. Add the indicator. It displays straight away, using the current price and one ATR as demonstration values, so you never face an empty table.
2. Open the settings and enter your own Entry and Stop in the Trade group. Add a Target if you want R:R.
3. Set your account size, the risk for this trade, and your ceiling.
4. Pick the sizing mode and the pip size that match your instrument.
Sizing modes
Lots: gold, forex, CFD. Set the contract size (XAUUSD standard is 100 oz per lot, forex standard is 100000).
Units: crypto and spot.
Whichever you pick, the position size is shown with its unit spelled out and the other unit in brackets, so it cannot be misread.
What it shows
Direction, account size, trade risk against your ceiling, amount at risk, stop distance in price and in pips, position size, R:R and gain at target.
Customisation
Every colour is configurable: header within limit, header when the ceiling is passed, table background, text, position size value, and the entry, stop and target lines. Text size, border width and table position can also be changed.
Notes
Pip size is a setting, not a guess: gold 0.1, forex majors 0.0001, JPY pairs 0.01, and 0 to hide pips on crypto.
The calculation is exact when the quote currency matches your account currency. On crosses where it does not, treat the result as an approximation.
This is a planning tool. It does not place orders and does not read your broker account.
Indicator
ATR Chandelier StopTrade Control Adaptive ATR Chandelier Stop
The Trade Control Adaptive ATR Chandelier Stop is a volatility based trailing stop designed for swing and position traders who want a more objective way to manage exits and protect gains.
Instead of applying the same fixed percentage stop to every stock, the indicator uses Average True Range, or ATR, to account for how much each symbol typically moves. More volatile stocks receive wider stop levels, while lower volatility stocks receive tighter stop levels.
How it works
For long positions, the trailing stop is calculated as:
Highest high over the selected lookback period minus ATR multiplied by the selected multiplier
With the default settings, the calculation is:
22 bar highest high minus 3 times the 14 bar ATR
This creates a stop that hangs below the stock’s recent high, which is why it is called a Chandelier stop.
As the stock makes new highs, the stop can move higher. During normal pullbacks, the stop generally does not move lower while the bullish trend remains intact.
When price closes below the trailing stop, the indicator changes to a bearish state and begins plotting the corresponding stop above price.
Default settings
ATR Length: 14
Price Lookback: 22
ATR Multiplier: 3.0
Automatic Volatility Adjustment: Off by default
These settings are intended as a balanced starting point for swing and position traders using the daily chart and holding trades for several weeks to several months.
Adaptive volatility option
The optional adaptive setting adjusts the ATR multiplier based on ATR as a percentage of the stock price.
When enabled, the indicator gives highly volatile stocks additional room and may tighten the stop for lower volatility stocks. The standard 3 ATR setting remains the default for traders who prefer a simpler and more consistent approach.
Best uses
The indicator is designed for:
• Swing trading
• Position trading
• Trend following
• Managing profitable trades
• Reducing emotional exit decisions
• Monitoring individual stocks or watchlists
It is generally most useful on the daily timeframe.
Alert condition
The script includes an alert condition for a confirmed daily close below the trailing stop.
Recommended PulseWire alert settings:
Condition: Daily Close Below ATR Stop
Interval: 1D
Trigger: Once per bar close
The alert is designed to trigger when the trend first changes from bullish to bearish. It does not repeatedly alert every day while price remains below the stop.
Important considerations
The Trade Control Adaptive ATR Chandelier Stop is a trade management tool, not a complete trading strategy.
Traders should also consider technical support and resistance, entry price, position size, maximum acceptable loss, earnings risk, gap risk, and overall market conditions.
A stock can gap below the plotted stop, particularly around earnings or major news. The indicator does not guarantee execution at the displayed price. Indicator
Credit Stress Composite V2 Credit Stress Composite 2
Credit Stress Composite 2 is a macro-credit regime oscillator designed to identify shifts between easing credit conditions, tightening pressure, stress, and extreme credit dislocation.
The indicator combines multiple credit and macro-confirmation inputs into a single normalized composite, then maps that composite into clear regime zones. The goal is not to call exact tops or bottoms, but to identify when credit conditions are improving, deteriorating, or reaching historically elevated stress levels.
**Core Features**
- Composite credit stress oscillator
- Signal line and histogram for momentum confirmation
- Regime thresholds for calm, tightening, stress, and extreme stress
- Background shading by credit regime
- Early deterioration, confirmed tightening, easing reversal, and extreme stress markers
- Regime table for quick state reading
- Export plots for use in broader dashboard or stack systems
**How I Use It**
Rising readings suggest credit stress is increasing. Falling readings suggest credit conditions are easing. The most useful signals often occur when the oscillator begins reversing from elevated stress zones, especially when price structure confirms the shift.
In the BTC example shown, prior easing reversal signals appeared near major Phase 2 bull-market transitions, where credit stress began cooling while price started reclaiming upside momentum.
**Signal Types**
- `ED` Early Deterioration: first signs of tightening pressure
- `CT` Confirmed Tightening: stronger confirmation of rising stress
- `ER` Easing Reversal: stress begins easing from elevated conditions
- `XS` Extreme Stress: composite reaches extreme stress territory
**Important Notes**
This tool is intended for macro context and regime awareness. It should be used with price structure, trend, liquidity, and risk-management tools. It is not a standalone buy or sell signal.
Credit conditions can lead, lag, or diverge from price depending on the asset and cycle stage.
**Disclaimer**
This script is for educational and informational purposes only. It is not financial advice. Always do your own research and manage risk appropriately. Indicator
Multi-Timeframe ATR Stop & Contract Risk TableSummary
The Multi-Timeframe ATR Stop & Contract Risk Table is an educational risk-management tool that displays Average True Range (ATR) values from multiple lower timeframes in a single table. It converts ATR into points, ticks, and estimated dollar values to help traders compare current market volatility across intraday timeframes.
The indicator is intended to assist with trade planning and position sizing. It does not generate trade signals or recommend entries or exits.
Description
Average True Range (ATR) is a widely used volatility measurement that estimates the average movement of price over a specified lookback period.
This script displays ATR values from the following timeframes:
1 Minute
2 Minute
3 Minute
5 Minute
For each timeframe the table displays:
ATR in Points
ATR converted to Ticks
Estimated Full-Size Contract Dollar Value
Estimated Micro Contract Dollar Value
The calculations can use the chart symbol's point value automatically or a manually specified value when desired.
The indicator is designed to reduce mental calculations when comparing potential stop distances across multiple intraday timeframes.
Features
Multi-timeframe ATR calculations
Independent ATR length
Multiple ATR smoothing methods
RMA
SMA
EMA
WMA
Automatic symbol point-value detection
Optional manual point-value override
Estimated dollar risk for full-size contracts
Estimated dollar risk for micro contracts
Adjustable ATR multiplier
Adjustable contract quantities
Compact table positioned on the chart
Tooltips throughout the settings and table
How to Use
Select an ATR length appropriate for your market.
Choose the desired ATR smoothing method.
Confirm or manually enter the contract point value if necessary.
Adjust the ATR multiplier if your trading plan uses stops based on a fraction or multiple of ATR.
Use the table to compare recent volatility between the 1-, 2-, 3-, and 5-minute timeframes.
The displayed values may be useful when estimating stop distances and approximate monetary exposure before entering a trade.
Educational Notes
Average True Range measures recent volatility.
ATR does not indicate:
market direction
trend strength
probability of success
optimal entry locations
ATR should be interpreted together with the user's own market analysis and risk-management methodology.
Intended Use
This script is intended for educational and informational purposes.
It assists traders by presenting volatility information in a compact format that may reduce manual calculations during trade planning.
Limitations
Dollar values are estimates based on the selected point value and contract quantity.
Actual fills, slippage, commissions, and execution costs are not included.
Different markets may use different contract specifications.
ATR is a lagging volatility measure and should not be interpreted as a predictive indicator.
Originality Statement
This indicator was developed as an original implementation using Pine Script® v6.
The calculations use publicly documented ATR methodology available within PulseWire's Pine Script® environment. The implementation, table layout, user interface, conversion logic, and visualization were written specifically for this script and are not copied from another published PulseWire indicator. Indicator
Volatility Jump DetectorVolatility Jump Detector
This tool marks structurally significant price moves and tells you what kind of move each one was. It is an event detector, not a signal — it does not predict direction. It answers "did something real just happen here, and what was behind it?"
HOW JUMPS ARE DETECTED
Most "big candle" indicators compare a move to an ordinary volatility estimate, which has a circular flaw: a large jump inflates the very volatility measure used to judge it, so the biggest moves look less exceptional than they are.
This uses bipower variation (Barndorff-Nielsen and Shephard; Lee and Mykland), which builds the local volatility estimate from products of adjacent absolute returns. That construction is insensitive to a single large move, and it is computed excluding the current bar — so a jump cannot inflate its own threshold. A move is flagged when it exceeds a chosen multiple of that robust volatility, and the panel reports the exact sigma reading.
TWO INDEPENDENT CONTEXT AXES
INTENSITY — Is the recent jump rate elevated versus its own long-run baseline? Reported as a multiple with the underlying counts always visible, so you can see the sample behind the verdict. Note on method: a Hawkes branching-ratio estimate was implemented first and dropped. At a 4-sigma threshold real data yields only a handful of jumps per few hundred bars, far too few for count-variance statistics — it returned zero on every timeframe tested. A plain rate comparison is what sparse events can actually support, and below a minimum count the reading honestly says "insufficient" rather than printing a fabricated number.
VOLUME — Was the jump backed by participation, or did it slip through a thin book? A large move on heavy volume and the same move on nothing are different events. Auto-disables on instruments without a volume feed.
Optionally link the Risk & Levels Cockpit's exported levels, and jumps that fire through your invalidation level or at the point of control are flagged.
ON THE CHART
Direction-aware triangles mark each jump, colored by the intensity regime at that moment. The most recent jump is labelled with its sigma reading and volume tag. The background tints when jump intensity is elevated. The panel adapts to your chart theme and colors each row by meaning.
WORKS ON ANY MARKET AND TIMEFRAME
All lookbacks are in bars with no session, expiry, or clock anchors. Non-repainting: the robust volatility estimate excludes the current bar, and everything confirms at close.
LIMITATIONS
Not a signal and not investment advice. This marks events and describes them; it does not forecast what follows. An earlier version classified jumps as "ignition" versus "exhaustion" and measured the forward tendency of each — the measured continuation and reversal rates sat at base rate, so that classification was removed rather than kept as decoration. Jump detection depends on the threshold you choose; a lower threshold marks more moves and dilutes significance. Intensity needs a long baseline window because jumps are rare, and reports "insufficient" when the count is too low. Volume confirmation requires a volume feed.
CREDITS
Original implementation. Barndorff-Nielsen and Shephard bipower variation; Lee and Mykland (2008) jump test; jump-rate intensity comparison. Indicator
ATR Range Adaptive ATR Range Adaptive — TF-adaptive volatility bands with dashboard.
A precision volatility tool that projects the statistical extent of a "normal" bar move as five horizontal levels around the previous close — and recalculates automatically on whatever timeframe you're viewing.
How it works:
Add the indicator once. From the previous closed bar of the current chart timeframe it draws the middle line (previous close) plus four ATR-multiplied bands — ±0.5 × ATR and ±1.0 × ATR. Switch to 1H → hourly levels. Switch to 5M → 5-minute levels. No presets to change.
What it shows:
- Previous close as the anchor (middle line)
- +100% band (upper strong resistance) at previous close + 1 × ATR
- +50% band (intermediate resistance) at previous close + 0.5 × ATR
- -50% band (intermediate support) at previous close - 0.5 × ATR
- -100% band (lower strong support) at previous close - 1 × ATR
- Corner dashboard: current TF, previous close, 1 ATR as a percentage of price, and each level's value + distance from the live price
Key features:
- Fully TF-adaptive: no fixed daily/monthly assumption — bands follow the chart's timeframe
- Selectable ATR smoothing: RMA (Wilder), EMA, SMA, WMA
- Adjustable ATR length and multiplier
- Level lines extend a configurable number of bars to the right
- Middle line can be toggled independently of the ATR bands
- Dashboard: 6 anchor positions, 4 text sizes, adjustable cell transparency
- Full color palette for each band + header and text
- Tooltip on "1 ATR, %" explains volatility bands (low / normal / elevated / high)
- Clean overlay: only 5 lines and 1 dashboard, no chart clutter
Who it's for:
Traders who want a fast, timeframe-aware read on how far price has already stretched from the previous close — and where a "normal" move statistically ends. Useful for intraday range trading, scalping around ATR extremes, sizing stops, and spotting bars that break out of typical volatility. Indicator
FractalMemoryLib [Jayadev Rana]FractalMemoryLib packages the pattern-memory engine used by the Fractal Memory Projection indicator and the Fractal Memory Strategy so any script can import it.
WHAT IT DOES
The library finds the historical window whose movement shape most resembles the most recent bars (mean squared distance between stdev-normalized log returns), replays what followed that window as a projected close path, and sizes stops and targets adaptively by volatility regime.
EXPORTED FUNCTIONS
logRet(src) - one-bar log return of a series.
bestMatch(src, winLen, scanDepth, gapAhead) - scans up to scanDepth bars back and returns the offset of the most similar window plus a 0-100 similarity score. gapAhead reserves bars after the match for a projection.
analogPath(src, offset, fcLen, scaleF) - array of fcLen projected closes built by replaying the returns that followed the match, rescaled by scaleF (for example current ATR over ATR at the match).
adaptiveR(atrLen, rankLen, base) - volatility-adaptive unit risk: ATR times (base plus its 0-1 percentile rank), plus the rank itself. Call on every bar.
volRegime(volRank) - "Low", "Normal" or "High" label from the rank.
targets(entry, dirSign, unitR, slMult) - stop loss and TP1/TP2/TP3 at 1R, 2R and 3R.
USAGE NOTES
Call adaptiveR on every bar for ta consistency. bestMatch and analogPath are loop-heavy; for display purposes call them on the last bar only, and make sure the chart has at least scanDepth plus gapAhead bars of history. When the library itself is added to a chart it draws a small demo projection line from the best analog.
The analog projection is a statistical reference to a similar past episode, not a prediction, and not financial advice. Library
Drawdown [WynTrader]Drawdown
Hello my friend
Before trading an unfamiliar asset, it's worth seeing how it survived its toughest moments — including major market crashes. This indicator reveals every significant decline a security has experienced: how far it dropped, and how long it took. Seeing a past drawdown of -54% over 13 months makes the next correction far less intimidating.
Use it to measure real risk, set realistic expectations, and trade with more confidence.
█ CONCEPTS
A drawdown is the decline from a price peak to the lowest point that follows. The indicator automatically detects every peak and trough, filtering out noise to keep only declines at or above your chosen threshold (default: 20%).
█ FEATURES
Threshold — Set the minimum decline to display, so only meaningful crashes appear.
Boxes & Labels — Each drawdown is highlighted on the chart from peak to trough, labeled with its duration and amplitude (e.g., 13M -54%).
History Table — Lists every recorded drawdown with start/end dates, span, and decline %. Sortable and adjustable in size.
█ CONCLUSION
Before investing, check an asset's drawdown history: how deep, how long, did it recover? These questions reveal its true volatility and resilience. A chart without this history tells only half the story.
█ WYNTRADER
I'm not a Pine Script programmer — just a trader building tools for my own analysis. A few rough edges may remain. Enjoy!
WynTrader Indicator
Prop Firm Risk Guard I EonMetrics Prop Firm Risk Guard
Prop Firm Risk Guard is a risk dashboard and position size calculator for prop firm challenge and funded-account traders. It keeps the numbers that decide whether your account survives — the Daily Loss Limit, the Max Drawdown floor and the size of your next trade — on one screen, derived from one shared account state.
Stated plainly up front: PulseWire cannot see your broker account. Your balance and today's P&L are MANUAL inputs — you type them in, the script does the limit math and the sizing math. Entry, Stop and Take Profit are also yours: the script never calculates or suggests any of them, it only draws the levels you decided on and does the arithmetic. The only live, price-driven element is the Entry/SL/TP lines and their cross alerts. No signals, no trade suggestions.
🔶 WHY ONE SCRIPT
A challenge usually fails through one compounding mistake: a trade sized without checking how much of today's loss allowance is actually left, so a routine stop-out becomes a daily breach. That check only works when the daily limit, the drawdown floor and the position size are computed from the same account state at the same moment — which is why they are one dashboard instead of separate tools you would have to cross-reference by hand. The last sizing row makes the link explicit: it compares one full stop-out against your remaining daily room and turns red BEFORE the trade if it doesn't fit.
🔶 WHAT IT DOES
Daily Loss Limit — enter your firm's daily loss % and its basis (starting or current balance). Today's P&L is a NET number, wins offset losses. Because firms word this rule two ways, both models are supported: Floor (the day has a fixed equity floor, so intraday profit adds room before it — the common model) and Hard Cap (the allowed loss is fixed, profit does not extend it). The table shows the remaining allowance in money and a status ladder: OK → CAUTION (50% used) → DANGER (80%) → BREACHED.
Max Drawdown — Static (floor fixed below the starting balance) or Trailing (floor follows the equity high-water mark). Shows the floor as an actual money level and the buffer above it, with the same status ladder.
Position sizing — risk per trade as % of balance or a fixed amount, planned entry (or live price) and stop. Returns the size in units, the forex conversion to 100k lots and the notional value. A Contract Multiplier input keeps the math correct on futures (e.g. ES = 50, GC = 100) as well as stocks, crypto and forex.
Take Profit (optional) — add your own TP price to see the R:R ratio and the money gain if it hits, using the same calculated size. If the TP sits on the wrong side of entry for your direction, the cell flags it instead of showing a meaningless ratio.
Entry / SL / TP lines — your levels drawn on the chart, with three alert conditions that fire when price crosses any of them.
🔶 HOW TO USE
1. Settings → Account: starting balance, current balance; high-water mark for trailing-drawdown firms (0 = auto).
2. Prop Firm Rules: copy the exact numbers and models from your firm's dashboard.
3. During the session, keep Today's P&L updated — the daily section only knows what you tell it.
4. Before a trade: set risk, entry and stop; read the size; make sure the last row is not red.
5. Optional: add a TP for R:R, and set alerts on the three price-cross conditions.
🔶 SETTINGS
Account (balances, high-water mark) · Prop Firm Rules (daily loss % + basis + Floor/Hard Cap, max drawdown % + Static/Trailing, profit target) · Today's P&L · Position Sizing (risk mode, entry/stop/TP, contract multiplier, lines toggle) · Table (position, text size).
This tool does the arithmetic of your firm's rules and your own trade plan. It does not know your account, does not predict anything and does not tell you what to trade.
Part of the EonMetrics toolset.
Indicator
Triple Barrier Exit with Meta LabelingOverview
Most tools tell you when to enter. This one frames how a trade would be managed — and then keeps an honest record of how that framing actually resolved. It takes a primary entry signal (its own built-in breakout, or any external signal series you point it at), draws a volatility-scaled profit barrier, stop barrier and time barrier around it, watches which is touched first, and feeds every resolved outcome into a live track record. On top sits a meta-label gate: a small online model that learns, from those resolved outcomes, whether to take or skip the next signal.
It is a research and trade-framing study — not a strategy, not a signal service, and not a validated edge.
Why these parts are ONE tool (mashup rationale)
Each layer exists because the one before it leaves a question open:
The triple barrier. A raw entry signal has no definition of success. Profit / stop / time barriers, scaled by current volatility (ATR or an EWMA of returns), turn a signal into a labelled outcome: profit-hit, stop-hit, or timed-out. Widths are regime-asymmetric — the profit barrier widens in trend and tightens in chop — because a fixed frame misprices the same signal in different conditions.
The trend-scanning vertical. A fixed holding time is arbitrary. The time barrier is instead chosen from candidate horizons by the strongest |t-value| of a linear fit — the horizon over which price is actually trending most decisively.
The meta-label gate. Knowing outcomes isn't the same as acting on them. A small online logistic model, trained only on resolved outcomes, scores each new signal and says TAKE or SKIP. It stays disabled until enough trades have resolved, so it never acts on an untrained model.
The honesty layer. Overlapping trades are not independent samples — so wins are recency-decayed and reported with a Wilson 95% lower bound per regime, alongside a reliability table and a Brier score for the meta-gate itself. If the gate isn't calibrated, the panel says so.
Remove any layer and the tool either mislabels the trade, mistimes it, acts on an untested model, or reports a win-rate it hasn't earned.
How it works
A primary signal fires. If the meta-gate passes, the trade is framed: profit = entry ± (PT × regime multiplier × σ), stop = entry ∓ (SL × regime multiplier × σ), and a vertical barrier holdH bars ahead. The frame is drawn as a forward box that recolours green / red / grey on first touch. Same-bar ties resolve stop-first (the conservative assumption). MFE and MAE are tracked live on the open trade. On resolution, the outcome trains the meta-model and updates the per-regime statistics.
How to use it
Read the panel before you trust the frame.
Meta gate — whether the model would take or skip the current signal (stays "warming" until it has enough resolved samples).
Wilson 95% lower — the honest floor of the win-rate in the current regime. If it isn't above 50%, this framing has not demonstrated an edge here.
Meta Brier — below ~0.25 means the gate's probabilities are reasonably calibrated; above it, ignore the gate.
The most useful thing you can do with it: point it at your own entry signal via the external-source input, and see how your signal resolves under a disciplined exit frame. The suggested size is advisory arithmetic (risk ÷ stop distance), not a recommendation. Only one trade is managed at a time — this is a study of the framing, not a portfolio simulator. The dashboard has a Compact layout (default) and a Pro layout (adds the scanned horizon, Brier, reliability tiers, PT/SL/timeout counts, live MFE/MAE and suggested size).
Universal across markets
Entry source, σ source, barrier widths and horizons are all inputs, so it runs on any symbol and timeframe. It needs no volume. Defaults target intraday index futures.
Non-repainting
Entries are taken and outcomes resolved only on confirmed bars, and the meta-model is trained only on resolved outcomes — so no statistic reads its own future and nothing inflates intrabar. The live "next-trade frame" preview is a forward projection at the current bar only, by design.
Originality
The triple barrier, meta-labelling and trend-scanning are published research concepts, credited below. What's assembled here is the specific synthesis: the triple barrier used as a live exit/management frame rather than an offline training pipeline, regime-asymmetric barrier widths, an online meta-gate that trains itself on the chart in front of you, and an honesty panel that reports the Wilson lower bound, the reliability tiers and the gate's own Brier score. Clean-room implementation; no third-party code reused.
Concept credits
Triple-barrier labelling, meta-labelling, trend-scanning, and sample uniqueness / time-decay for non-IID overlapping outcomes — Marcos López de Prado (Advances in Financial Machine Learning). Here the triple barrier is used as an exit/management frame and a labelling substrate, not as a training pipeline.
Wilson score confidence interval — Edwin B. Wilson · Brier score — Glenn W. Brier
Average True Range — J. Welles Wilder · Efficiency Ratio — Perry Kaufman
Inverse-volatility position sizing — standard risk-management practice
Honest limits
Overlapping trades are not independent, which is exactly why wins are decayed and reported with a Wilson lower bound rather than a raw percentage — treat the win-rate as descriptive, not a probability of future results. The meta-model is a small online logistic fit on three features; it can be miscalibrated, which is why its Brier score is shown. All figures are in-sample, with no costs, slippage or spread. Nothing here predicts price.
Disclaimer
Research and educational tool only. Not financial advice, not a recommendation, and no guarantee of results. The position-size output is arithmetic, not advice. Trading carries risk of loss. Test out-of-sample and make your own decisions. The author accepts no liability for any use. Indicator
[EWT] MA Extension Risk Stats MA Extension Risk Stats helps traders objectively measure how extended a stock, index, or any instrument is relative to its own historical behavior from a moving average.
Instead of guessing whether price “looks high,” this indicator calculates the percentage distance of every historical bar from a configurable SMA or EMA and then displays the Maximum, Mean, and Median deviations in a clean, updating table. By comparing the current deviation against these historical benchmarks, you get clear, data-driven context for profit booking decisions.
Key Benefits
Objective Extension Measurement: See exactly where the current price stands in the instrument’s historical distribution of moves away from its moving average.
Better Profit Booking Decisions: Know whether the current extension is normal, moderate, high, or near the historical maximum — removing emotion from scaling out of positions.
Risk Context at a Glance: Color-coded risk levels (Low / Moderate / High / Very High) combined with concise guidance help you quickly decide whether to book partial profits (30-50%) or exit most/all of a position.
All-History Perspective: Unlike rolling-window tools, this indicator uses the entire available dataset on your chart, giving you a complete picture across different market regimes.
Fully Customizable: Choose SMA or EMA, any period length, and position the compact table anywhere on the chart. The table automatically adapts to your light or dark chart theme for excellent readability.
Practical Use Cases
Trend Following & Swing Trading: When price stretches far above its MA during a strong uptrend, use the stats to scale out systematically instead of hoping for more upside.
Mean Reversion Setups: Identify when price has extended unusually far below its MA and prepare for potential bounces with better risk awareness.
Position Management: Apply consistent rules such as “book 50% when current deviation exceeds 1.5× median” or “exit fully when approaching historical maximum.”
Multi-Timeframe Analysis: Run it on daily charts for swing trades and weekly charts for positional decisions using the same logic.
Whether you trade stocks, indices, forex, or crypto, MA Extension Risk Stats gives you a professional, repeatable framework to manage extension risk and improve profit-taking discipline. It is especially valuable for traders who want to move from subjective “it looks extended” decisions to quantifiable, historically grounded rules.
Add it to your chart, adjust the MA period to match your style, and start making more confident, data-backed decisions on when to lock in profits. Indicator
Viprasol Liquidity Trail Matrix with Signal TargetOverview
The Viprasol Liquidity Trail Matrix with Signal Target is a trend-following signal engine that combines a volatility-adaptive trailing "liquidity" band structure with a Cardwell-style RSI regime filter, then turns confirmed pullback-and-continuation events into fully managed trade plans — entry, stop, three scaled targets, break-even logic, and an honest performance read-out. It is built for discretionary traders who want a single tool that answers three questions at once: what is the trend, is momentum backing it, and if a signal fires, exactly where are my entry, stop and targets.
This is an open-source, credited derivative. See the Credits & Originality section at the end — the trailing-matrix and Cardwell-RSI concepts are adapted from prior open-source work under CC BY-NC, with substantial original additions layered on top.
How It Works
Step 1 — Liquidity Trail Matrix (adapted)
A volatility trailing stop (ATR-scaled) defines the active trend and flips only when price closes decisively through it. Around that trailing line the script projects a ladder of "liquidity bands" spaced in ATR units, forming the retest zone price tends to revisit before continuation. In an uptrend the bands sit below price as stacked support; in a downtrend, above price as resistance. Because the spacing is ATR-based, the whole structure widens in volatile conditions and tightens in quiet ones.
Step 2 — Cardwell RSI Regime (adapted)
RSI is classified into a directional regime using Andrew Cardwell's range-rules principle: in a healthy uptrend RSI holds its 40-80 band, in a downtrend it works the 20-60 band. The regime flips bull when RSI thrusts through the upper trigger and bear when it breaks the lower trigger, holding state in between. Signals are only allowed in agreement with the regime, so the momentum context must confirm the trend before anything fires.
Step 3 — Confluence gating (adapted + new)
Before a signal is eligible it must pass a confluence gate: trend agreement, RSI regime agreement, an ADX minimum (chop filter), and an optional higher-timeframe bias pulled non-repainting (previous HTF bar, lookahead off). A minimum confluence score suppresses low-quality setups.
Step 4 — Retest entry + Signal Target (adapted)
When the confluence conditions hold and price pulls back into the band zone then closes back in the trend direction, a signal fires on the confirmed bar. The engine sets a structural stop, then projects TP1/TP2/TP3 as R-multiples of that risk and draws them on the chart with price and percent labels. Break-even logic moves the stop to entry after TP1.
Step 5 — Honest trade management + statistics (new)
Original additions in this release:
- One-trade-at-a-time engine: a trend flip no longer force-closes a trade. A position runs to its stop or final target, and a new entry only opens once the previous one is fully resolved. A reversal toggle restores the old flip-reversal behaviour if preferred.
- Max-bars-in-trade timeout so a lingering position cannot block the engine indefinitely.
- Hide-on-hit targets: each target line and label is removed the instant it is touched, keeping the chart clean.
- Staggered target labels so ENTRY/SL/TP1/TP2/TP3 never overlap.
- Session filter and post-stop cooldown (both optional, off by default).
- Honest performance panel: Avg R and Profit Factor computed on a transparent one-third-scale-out model, plus Max Drawdown in R and best/worst streak — so the win-rate (which counts a trade a win once TP1 is touched) is read alongside true expectancy.
- Suggested position size from an account-size and risk-percent input.
Non-repainting: trend, structure, signals and targets confirm at bar close; higher-timeframe data uses lookahead off on the previous bar.
Key Features
- Volatility-adaptive trailing liquidity-band matrix
- Cardwell RSI regime filter
- ADX chop filter + optional non-repainting HTF bias
- Range-distributed volume profile (POC / Value Area / low-volume nodes)
- Retest-continuation signals with confluence scoring
- Entry / SL / TP1-TP2-TP3 with R-multiple targets, break-even and hide-on-hit visuals
- One-trade-at-a-time management with optional reversal, timeout, session filter and post-stop cooldown
- Honest stats: win rate, Avg R, Profit Factor, Max Drawdown (R), streak, suggested size
- Multi-section dashboard, trend-tint candles, and a full alert suite with optional webhook JSON
How to Use
1. Add to any liquid symbol and timeframe. Confirm the dashboard reads a clear trend and RSI regime.
2. Wait for a LONG/SHORT marker — it only fires on a confirmed retest that passed the confluence gate. The number on the marker is the confluence score.
3. Trade the drawn plan: entry, stop, and TP1/TP2/TP3. The dashboard mirrors the live levels and, once trades close, shows Avg R / Profit Factor / Max DD so you can judge the edge honestly.
4. Tune selectivity with ADX Minimum and Min Score; tune trade behaviour with the reversal, timeout, session and cooldown settings.
Settings
- Trend Engine: ATR length, trail factor, band count and spacing
- Signals: min score, retest window, cooldown, integration mode, reversal toggle, session filter, post-SL cooldown
- RSI Regime: length, bull/bear triggers, confirm bars, integration mode
- Risk Management: SL mode, break-even, max bars in trade, account size, risk %
- Signal Targets: R-multiples for TP1/TP2/TP3
- Volume Profile / HTF / Dashboard / Colors: display and behaviour toggles, all with tooltips
Alerts
Dynamic alerts (ticker, timeframe, price, score, levels, RSI, regime) for: Long entry, Short entry, TP1/TP2/TP3 hit, break-even, stop-out, reversal, trend flips, and regime shift. Entry alerts can emit webhook-ready JSON.
Limitations & Disclaimer
This is an analysis and trade-planning tool, not a promise of profit. The built-in statistics are a session-level model (they reset on chart reload), assume idealised fills with no slippage or commission, and use a one-third-scale-out assumption for Avg R — real results differ. Signals confirm at bar close and do not repaint historically, but the still-forming bar is provisional until it closes. No indicator predicts the future; always combine with your own risk management. Nothing here is financial advice.
Credits & Originality (CC BY-NC 4.0)
This script adapts and builds upon prior open-source work and is published open-source, free, for non-commercial use, with attribution as required by the licence:
- "Liquidity Trail Matrix" by WillyAlgoTrader — the trailing liquidity-band structure concept.
- "Cardwell Range Analyze" by MarkitTick — the Cardwell RSI range-regime concept.
Changes made by Viprasol (this version): combined the two engines into one workflow and added the confluence gate, non-repainting HTF bias, range-distributed volume profile, R-multiple Signal Targets with break-even and hide-on-hit visuals, one-trade-at-a-time management with reversal toggle / max-bars timeout / session filter / post-stop cooldown, the honest statistics panel (Avg R, Profit Factor, Max Drawdown R, streak) and suggested position size, plus the multi-section dashboard and dynamic/webhook alerts.
Licence: Creative Commons Attribution-NonCommercial 4.0 (creativecommons.org). Educational, non-commercial use only. Not financial advice.
Indicator
Tail-Risk & Fragility OscillatorTail-Risk & Fragility Oscillator
A risk-shape meter — not a buy/sell oscillator. It measures the asymmetry (skewness) and tail-fatness (excess kurtosis) of recent returns to answer one question your momentum and trend tools cannot: is fragile, fat-tailed risk building right now, and on which side? It reads this in plain language, optionally from higher-resolution "realized" data, and forward-calibrates whether those fragile states have actually preceded moves on the symbol you're viewing.
Why these parts are combined (not a mashup for show). Skewness says which tail is heavier (where a violent move is more likely to come from). Excess kurtosis says how heavy the tails are (how likely an outsized move is at all). Neither alone is "fragility" — fragility is one tail heavy AND tails fattening together — so both are combined into one reading. Realized estimation (optional) measures these moments from intrabar returns rather than one value per bar, far less noisy. And a Cornish-Fisher value-at-risk turns skew + kurtosis into a single "expected bad-case move" you can size against. Together they form one coherent tail-risk tool.
How it works. Returns feed central moments over a window: skew = m3/σ³, excess kurtosis = m4/m2² − 3. With "Realized" on, the moments come from a lower-timeframe return stream (confirmed only). The signed wave is standardized skewness; a percentile of kurtosis flags fat tails; a Cornish-Fisher quantile combines both, scaled to the chart timeframe over the calibration horizon, into a value-at-risk. A "fragile-down" state (negative-skew extreme + fat tails) is then scored for a subsequent down move and "fragile-up" for an up move, using triple-barrier outcomes, split into in-sample and recent out-of-sample, with a confidence interval and a multiple-testing check.
How to use. Read the Verdict row — "Downside-fragile" / "Upside-fragile" means a heavy tail is building on that side; "Tails normal" means no fragility. The Conviction row says whether that state has actually preceded the expected move on this symbol. Use it to size down, widen stops, or expect violence on the fragile side — layered on your own directional tool, never as a standalone entry. The "Bad-case move" row is the modelled adverse move over the next N bars at your chosen confidence.
What's original. Realized higher-moment estimation, a horizon-scaled Cornish-Fisher VaR readout, the forward triple-barrier calibration with an out-of-sample split, and a conviction read that openly admits when there's no proven edge — on a risk axis (fragility) that most indicators ignore entirely.
Inputs. Price source (change it for any market), reading mode (Simple/Pro), moment and realized-estimation controls, risk thresholds and VaR confidence, full calibration settings, and an auto-adapting dashboard legible on dark or light charts. Defaults are tuned for NSE:NIFTY1! intraday.
Honesty & limitations. Moments from short windows are noisy and the VaR is a model estimate, not a guarantee. Edge figures are computed on this chart's own history with overlapping windows and no costs — context, not a backtest; past behaviour doesn't predict the future.
Disclaimer: for research and education only. Not financial advice. Trading carries risk of loss; manage your own size. Indicator
Risk & Position-Size Calculator : Futures/Prop | Falcon AIStop blowing accounts to oversized positions. This free tool tells you EXACTLY
how many contracts to trade so a stop-out only costs the dollars you decided to
risk — on any futures symbol (MNQ, MES, NQ, ES, MGC, CL and more). It auto-detects
each contract's point value, so the math is always right.
It shows:
• Position size (contracts) for your account + risk %
• Your real $ risk, $/point, and 2R / 3R targets
• Prop-firm guardrails: how many losing trades until you breach your daily-loss
limit or trailing drawdown
• Prior-day high/low for context
Set your account size, risk %, and stop (manual or ATR-based) — it does the rest.
Built by Falcon AI. Educational tool only — not financial advice. Indicator
Indicator
