Renko Keltner Trend Engine - Brick Based Buy Sell SignalsDESCRIPTION:
█ RENKO + KELTNER CHANNEL = A MATCH MADE FOR TREND TRADING
This indicator rebuilds the classic two-window "Keltner Channel + Renko" trend strategy as ONE self-contained tool — and paints real Renko bricks directly on your normal candle chart. No Renko chart subscription needed, no second window: both Renko engines are built internally from chart data, and every indicator runs on the BRICK series, not on time bars.
█ HOW THE STRATEGY WORKS (the exact rule set)
The system uses TWO Renko engines side by side:
1 — TREND FILTER (3x brick Renko + Stochastic 1,1,1)
The big-brick Renko removes all noise. A fast stochastic (1,1,1) on those bricks produces a clean square-wave regime line:
• Crosses UP through 20 → regime turns BULLISH → longs only
• Crosses DOWN through 80 → regime turns BEARISH → shorts only
The regime stays valid until the opposite cross happens.
2 — EXECUTION WINDOW (1x brick Renko + Keltner Channel + Stochastic 7,3,3 + 9 MA)
• Keltner Channel with the classic settings: EMA 20 mid line, 2 x ATR 10 bands — computed on the Renko bricks, so the channel hugs the brick ladder
• Entry: stochastic (7,3,3) crosses in the regime direction AND one FULL Renko brick closes completely OUTSIDE the Keltner channel → that breakout brick is the entry
• Stop: the middle Keltner band (EMA 20) at entry
• Exit: a brick closes back through the 9-period MA (below for longs, above for shorts)
Simple, mechanical, fully rule-based — and every signal on the chart explains WHY it fired (hover the BUY/SELL pill for the full checklist: regime, stochastic values, breakout level, entry, stop).
█ WHAT YOU GET ON THE CHART
• Real RENKO BRICKS painted over your chart (green/red ladder) — you SEE the logic the signals are computed on
• Keltner Channel (gold bands + mid stop line) and the white 9 MA exit line, all computed on bricks
• Designed BUY ▲ / SELL ▼ signal pills with full "WHY THIS TRADE?" tooltips
• TREND ▲/▼ flip tags whenever the 3x-brick filter changes regime
• Entry + stop lines for the running trade, ✓/✗ exit marks with result tooltips
• Animated cockpit panel: Renko engine info (both brick sizes), 4-step entry checklist with live status, position box, live trade counter + win rate
• Auto (ATR) brick sizing so it works on ANY symbol and timeframe out of the box — or fix the brick size manually (e.g. $3 on ES with $9 filter, the classic setup)
█ WEBHOOK AUTOMATION READY
Create ONE alert with condition "Any alert() function call" and paste your webhook URL. The indicator fires ready-to-use JSON on every event:
BUY / SELL / MA_EXIT / SL_HIT — including symbol, price, stop, brick size, regime, win rate, timeframe and timestamp. Plug it straight into bots, bridges and auto-traders.
█ HOW TO USE
1. Add to a liquid symbol (indices, gold, FX, crypto). The video setup: S&P 500 E-mini, 1-min data, $3 brick / $9 filter
2. Leave brick mode on Auto (ATR) or set your fixed brick size
3. Wait for the checklist in the panel to light up: ① Trend Filter ② Stochastic ③ Brick outside Keltner ④ Entry
4. Manage by the rules: stop = mid band, exit = 9 MA recross — or automate it via webhook
█ NOTES
• Signals are computed on confirmed bricks from confirmed bars — no repainting of past signals
• The Renko engines need warm-up bricks; on fresh charts give it a moment of history
• This is a trading TOOL, not financial advice. Test any setting on your market before going live.
Open source — read it, change it, learn from it.
WHY THESE PARTS BELONG TOGETHER
Renko strips time out of the chart and shows only committed movement, but it has no sense of
whether that movement is stretched or normal. A Keltner channel measures exactly that, but on a
time chart it is constantly distorted by bars that carry no movement at all. Building the channel
on the brick series instead of the candle series is the whole point of this script: the volatility
envelope is finally measured on the same axis the trend is measured on.
Indicator
Smart Renko Engine# Smart Renko Engine
Smart Renko Engine is designed for traders who like the clarity of Renko charts but don't want to leave their regular candlestick charts behind. Instead of switching your chart type, this indicator builds a Renko-style trend line directly on top of any standard chart, allowing you to keep your candles, volume, drawing tools, and other indicators exactly as they are.
The goal is simple: reduce market noise, make trends easier to follow, and provide additional context with moving averages and a built-in dashboard—all within a single indicator.
---
## How it works
At the heart of the indicator is a custom Renko engine that continuously calculates an internal Renko level using live price data. Whenever price moves by at least the selected brick size, the Renko line steps to a new level. Because the line only changes after meaningful price movement, many of the small fluctuations seen on time-based charts are filtered out, making the broader market direction easier to see.
Unlike PulseWire's native Renko charts, this indicator **does not replace your candles**. Instead, it overlays the Renko calculation on top of your existing chart, so you can continue using all of PulseWire's standard charting features.
The Renko line changes color automatically:
- **Green** when the current trend is bullish.
- **Red** when the current trend is bearish.
---
## Intelligent asset detection
One feature that makes this indicator different is its automatic asset detection.
Instead of asking users to manually adjust Renko settings every time they change markets, the script examines the current symbol and automatically selects a suitable default brick percentage for many common asset classes, including:
- Stock indices
- Index options
- Stock options
- Stocks
- Index futures
- Gold
- Silver
- Crude Oil
- Natural Gas
- Cryptocurrency
If your symbol cannot be identified—or if you simply prefer your own settings—you can switch to **Manual Mode** and choose the asset type yourself or enter a completely custom value.
---
## Flexible brick sizing
Different traders prefer different Renko styles, so the indicator offers two calculation methods.
### Percentage Mode
The brick size is calculated as a percentage of the current market price.
Because the brick size automatically scales as price changes, this mode adapts naturally to different instruments and changing market conditions. For most users, this is the recommended option.
### Fixed Box Size Mode
If you already trade using traditional Renko settings, you can specify an exact brick size in points.
This keeps every brick the same size regardless of the instrument's current price.
---
## Built-in trend analysis
To complement the Renko engine, the indicator includes three fully configurable moving averages.
You can choose between:
- SMA
- EMA
- WMA
- VWMA
- SMMA (RMA)
The first two moving averages create a trend cloud that changes color as momentum shifts.
- When the faster average moves above the slower average, the cloud turns bullish.
- When the faster average drops below the slower average, the cloud turns bearish.
A third moving average acts as a longer-term trend reference, helping traders quickly judge the broader market direction.
---
## Dashboard
A lightweight dashboard displays important information at a glance, including:
- The detected or selected asset type
- The active Renko brick size
- The current trend direction
The dashboard position can be moved to any corner or center position on the chart.
---
## How to use
There is no single "correct" way to trade with this indicator, but many traders use it to:
- Filter out short-term market noise.
- Identify the dominant trend more clearly.
- Stay aligned with larger market moves.
- Combine Renko structure with moving average confirmation.
- Add long-term trend context before entering trades.
The indicator is intended to support your existing analysis rather than replace it. It works best when combined with your own trading rules, risk management, and market knowledge.
---
## What makes this indicator different?
Rather than focusing only on plotting a Renko line, Smart Renko Engine combines several tools into a single workflow.
Some of its key features include:
- A custom Renko engine that works directly on standard candlestick charts.
- Automatic detection of multiple asset classes with optimized default brick percentages.
- Manual override for complete control.
- Choice between adaptive percentage-based bricks and fixed box sizes.
- Three configurable moving averages with multiple MA types.
- A dynamic EMA trend cloud for quick momentum visualization.
- A built-in dashboard showing the active asset class, brick size, and trend.
The objective is to provide a practical Renko experience without requiring traders to constantly switch between chart types or maintain several separate indicators.
---
## Notes
This indicator calculates its own Renko values internally and therefore should not be expected to match PulseWire's native Renko charts exactly. The calculation method is intentionally designed to work on regular time-based charts while preserving the original candlestick view.
Automatic asset detection relies on PulseWire's symbol information. In rare cases where a symbol uses an uncommon naming convention, selecting the asset manually may produce more appropriate brick sizing.
As with any trend-following tool, signals may appear after a trend has already begun, since a minimum price movement is required before a new Renko brick is formed.
---
## Disclaimer
This indicator is provided for educational and informational purposes only. It should not be considered financial or investment advice.
No indicator can predict future market movements or guarantee profitable trades. Always perform your own analysis, manage risk appropriately, and use this tool as part of a broader trading plan rather than as a standalone decision-making system.
## Support & Feedback
I hope you find this indicator useful in your trading journey.
If you have any questions, suggestions, feature requests, or simply want to connect, feel free to send me a message through the **PulseWire Chat**. I always enjoy hearing from fellow traders and appreciate constructive feedback that helps improve future versions.
If you found this script helpful, please consider:
* 👍 Boosting this publication
* 💬 Leaving a comment with your feedback or ideas
* ⭐ Following my PulseWire profile to stay updated with future indicators and improvements
Your support and feedback motivate me to continue building free, high-quality tools for the PulseWire community. Thank you!
Indicator
Weis Wave Renko - Effort vs ResultABOUT THIS SCRIPT
Weis Wave Renko – Effort vs Result indicator combines Renko price structure with Weis Wave volume analysis to help assess the relationship between market effort and price result.
This script is a fork and substantial extension of the original “Weis Wave Volume” script published by modhelius . Full credit is given to modhelius for the original Weis Wave calculation, Renko assignment methodology and histogram on which this version is based.
PURPOSE
The script was developed to support the following workflow:
Use VSA/Wyckoff analysis to identify the market background and possible exhaustion, absorption or testing activity.
Use Weis Wave volume to compare the effort behind successive buying and selling waves.
Use Renko structure to confirm changes of direction, higher lows, lower highs and sustained reversals.
Use the developing relationship between effort and result to assess whether supply or demand is strengthening, weakening or being absorbed.
Where appropriate, use a confirmed Renko reversal as part of an entry, stop-placement or trade-management process.
The script is intended to support a discretionary Wyckoff/VSA-style analysis of Renko charts.
It does not treat every Renko colour change as a trading signal. Instead, it is designed to help answer questions such as:
Is demand expanding or contracting?
Is supply expanding or contracting?
Is price rising with less apparent selling resistance?
Is price falling because support beneath the market is weak?
Is increased volume producing less price progress?
Does a high-volume wave represent a possible buying or selling climax?
Has a later lower-volume test supported or rejected that interpretation?
The underlying concept is effort versus result:
Effort = cumulative wave volume.
Result = the price movement achieved by the Renko wave.
PIVOT STATISTICS
At each completed Renko peak or trough, the script displays:
Weis Wave volume.
Number of Renko boxes contained in the wave.
The statistics box refers to the completed wave that formed that peak or trough.
The current uncompleted wave can also display a live statistics box. Live statistics remain provisional until the wave is completed by a confirmed change of direction.
WAVE COMMENTS
Each completed wave can receive a separate comment box connected to the centre of the relevant Renko leg.
The comment box may contain three distinct sections:
Structural conclusion.
Primary wave classification from the Scenario Key.
Explanation based on later price and volume behaviour.
For example:
Buying climax confirmed
Demand expanding
Next up-wave retest failed below the climax high on lower volume
The primary wave classification describes the completed wave relative to the previous wave in the same direction.
The structural conclusion may update later as additional waves complete reflecting the dynamic nature of the indicator.
PRIMARY WAVE CLASSIFICATIONS
Up-waves are compared with the preceding completed up-wave:
Demand expanding - More volume accompanied by a longer rise.
Demand contracting - Less volume accompanied by a shorter rise.
Less effort needed to rise - Similar or lower volume produced the same or greater upward progress.
Buying effort absorbed - More volume produced a shorter rise, suggesting that buying effort encountered supply.
Down-waves are compared with the preceding completed down-wave:
Supply expanding - More volume accompanied by a longer decline.
Supply contracting - Less volume accompanied by a shorter decline.
Less support beneath price - Similar or lower volume produced the same or greater downward progress.
Selling effort absorbed - More volume produced a shorter decline, suggesting that selling effort encountered demand.
No material change - Neither volume nor price result changed sufficiently to exceed the selected Material Change Threshold.
CLIMAX ANALYSIS
A large wave is not classified as a confirmed climax merely because it has high volume. The script uses a staged process:
Possible buying climax:
An up-wave becomes a buying-climax candidate.
The next down-wave must produce the selected Renko reversal confirmation, which defaults to three boxes.
The immediately following up-wave is treated as the retest.
The buying climax is confirmed only when that next up-wave: has lower volume than the original climax up-wave; produces a shorter rise; and fails below the climax high. The comment can then state:
Buying climax confirmed -
Next up-wave retest failed below the climax high on lower volume - Possible selling climax
A down-wave becomes a selling-climax candidate. The next up-wave must produce the selected Renko reversal confirmation. The immediately following down-wave is treated as the test. The selling climax is confirmed only when that next down-wave: has lower volume than the original climax down-wave; produces a shorter decline; and holds above the climax low.
The comment can then state:
Selling climax confirmed -
Next down-wave test held above the climax low on lower volume
Only the immediate next corresponding up-wave or down-wave is used for the test. The script does not search through later waves to find a result that retrospectively fits the climax interpretation.
NO SUPPLY AND NO DEMAND
Possible no supply requires a down-wave that:
has lower volume than the previous down-wave;
produces a shorter decline; and
forms a higher low.
The following up-wave must then sustain the selected number of reversal boxes.
Possible no demand requires an up-wave that:
has lower volume than the previous up-wave;
produces a shorter rise; and
forms a lower high.
The following down-wave must then sustain the selected number of reversal boxes.
These are rule-based interpretations of wave behaviour. They are not substitutes for a full Wyckoff or VSA analysis of background, location and market structure.
DEVELOPING WAVES
The current wave comment can update dynamically as volume and Renko-box count accumulate.
Developing comments use provisional wording such as:
Demand currently expanding.
Supply currently contracting.
Buying effort currently absorbed.
Possible no supply.
Possible no demand.
A developing classification can change before the wave completes.
PROJECTION BOXES/BRICKS
PulseWire can display projection boxes/bricks while the source-timeframe bar remains open.
Projection does not mean that the script is forecasting future bricks. It means that current price before the time period close has already moved far enough to meet one or more Renko thresholds during the still-open source bar.
For example, on a Daily Renko chart:
intraday price movement can produce provisional Renko bricks;
those bricks can appear before the Daily bar closes;
they can change or disappear before the close;
they become part of the confirmed historical Renko structure only after the source bar is confirmed.
The same principle applies to Weekly and other source intervals.
Live statistics and developing comments should therefore be treated as provisional.
RENKO ASSIGNMENT METHODS
Traditional: Traditional uses a fixed price-unit assignment value.
If the PulseWire chart is set to: Traditional box size = 3, the indicator should normally also be set to the same Renko Assignment Method = Traditional Value = 3
The script cannot automatically read the Renko box-size setting from the PulseWire chart.
ATR: ATR derives the assignment value from Average True Range. The Value input represents the ATR lookback period rather than a fixed number of price points. ATR adapts to volatility, but changing box/brick size make historical box-count comparisons less directly uniform than Traditional sizing.
Part of Price: The inherited Part of Price method calculates close ÷ Value
For example: Value 20 = approximately 5% of price. This is not identical to PulseWire’s Percentage LTP Renko setting.
DISPLAY AND POSITIONING
The script includes adjustable controls for:
up-wave and down-wave histogram colours;
histogram transparency;
pivot statistics placement;
statistics font size;
statistics connector lines;
adjacent statistics-label stacking;
wave-comment font size and line wrapping;
wave-comment vertical and horizontal offsets;
adjacent wave-comment stacking;
comment connector lines;
Permanent Note position and dimensions;
Scenario Key position and dimensions.
Adjacent label and chart leg comment box stacking is optional. Because Pine cannot measure the rendered pixel width or height of labels, collision avoidance is based on bar distance and price-coordinate separation rather than exact screen-pixel boundaries. The user may need to adjust these settings in the user interface panel to avoid overlapping of labels and comment boxes.
SCENARIO KEY
The Scenario Key translates observable effort-and-result combinations into the primary wave comments used by the script.
The table also explains the structural sequences used for:
climax candidates;
confirmed buying and selling climaxes;
possible no supply;
possible no demand;
failed follow-through;
provisional current-wave conclusions.
TIMEFRAME CONSIDERATIONS
Changing the PulseWire chart timeframe changes the source data used to construct the Renko chart.
A Daily Renko structure and a Weekly Renko structure are therefore separate reconstructions, not merely different zoom levels of the same sequence.
Weekly charts may be useful for broad structural background.
Daily charts may provide more responsive directional changes.
Lower source intervals generally provide greater granularity but also produce more noise and more frequent projection box/brick changes.
LIMITATIONS
Renko charts use synthetic price construction.
The apparent Renko box/brick price is not always a directly tradable execution price.
Projection boxes/bricks can repaint while the source bar is open.
Historical calculations can change when:
the chart timeframe changes;
Renko settings change;
indicator assignment settings change;
additional lower-timeframe data becomes available;
PulseWire reconstructs the Renko history.
This indicator should not be used to assume fills at ideal Renko box/brick prices.
Any strategy testing should use confirmed signals and actual market OHLC prices, with appropriate allowance for spread, slippage and execution delay.
The script provides analytical context. It does not provide financial advice or guarantee that any identified climax, test, no-supply condition, no-demand condition or Renko reversal will lead to a profitable trade.
CREDITS
Original Weis Wave Volume script and core calculation: modhelius
This version is an amended and extended fork incorporating:
Renko peak and trough statistics;
wave box counts;
dynamic wave comments;
effort-versus-result classifications;
climax and test sequencing;
no-supply and no-demand analysis;
projection-brick context;
configurable display, positioning and overlap-management controls.
DEVELOPMENT CONTEXT
The extended analytical concept implemented in this fork was developed following James Knox ’s presentation to the "To The Tick" trading group on 20/7/26 combining:
TradeGuider VSA observations;
Wyckoff concepts of effort versus result, climaxes, tests, springs, no supply and no demand;
Weis Wave volume;
Renko changes of direction and structural pivots.
The script’s classifications and dynamic comments were developed to make those relationships more easily visible directly on the Renko chart.
Indicator
Weis Wave Renko - Effort vs ResultABOUT THIS SCRIPT
Weis Wave Renko – Effort vs Result indicator combines Renko price structure with Weis Wave volume analysis to help assess the relationship between market effort and price result.
This script is a fork and substantial extension of the original “Weis Wave Volume” script published by modhelius . Full credit is given to modhelius for the original Weis Wave calculation, Renko assignment methodology and histogram on which this version is based.
PURPOSE
The script was developed to support the following workflow:
Use VSA/Wyckoff analysis to identify the market background and possible exhaustion, absorption or testing activity.
Use Weis Wave volume to compare the effort behind successive buying and selling waves.
Use Renko structure to confirm changes of direction, higher lows, lower highs and sustained reversals.
Use the developing relationship between effort and result to assess whether supply or demand is strengthening, weakening or being absorbed.
Where appropriate, use a confirmed Renko reversal as part of an entry, stop-placement or trade-management process.
The script is intended to support a discretionary Wyckoff/VSA-style analysis of Renko charts.
It does not treat every Renko colour change as a trading signal. Instead, it is designed to help answer questions such as:
Is demand expanding or contracting?
Is supply expanding or contracting?
Is price rising with less apparent selling resistance?
Is price falling because support beneath the market is weak?
Is increased volume producing less price progress?
Does a high-volume wave represent a possible buying or selling climax?
Has a later lower-volume test supported or rejected that interpretation?
The underlying concept is effort versus result:
Effort = cumulative wave volume.
Result = the price movement achieved by the Renko wave.
PIVOT STATISTICS
At each completed Renko peak or trough, the script displays:
Weis Wave volume.
Number of Renko boxes contained in the wave.
The statistics box refers to the completed wave that formed that peak or trough.
The current uncompleted wave can also display a live statistics box. Live statistics remain provisional until the wave is completed by a confirmed change of direction.
WAVE COMMENTS
Each completed wave can receive a separate comment box connected to the centre of the relevant Renko leg.
The comment box may contain three distinct sections:
Structural conclusion.
Primary wave classification from the Scenario Key.
Explanation based on later price and volume behaviour.
For example:
Buying climax confirmed
Demand expanding
Next up-wave retest failed below the climax high on lower volume
The primary wave classification describes the completed wave relative to the previous wave in the same direction.
The structural conclusion may update later as additional waves complete reflecting the dynamic nature of the indicator.
PRIMARY WAVE CLASSIFICATIONS
Up-waves are compared with the preceding completed up-wave:
Demand expanding - More volume accompanied by a longer rise.
Demand contracting - Less volume accompanied by a shorter rise.
Less effort needed to rise - Similar or lower volume produced the same or greater upward progress.
Buying effort absorbed - More volume produced a shorter rise, suggesting that buying effort encountered supply.
Down-waves are compared with the preceding completed down-wave:
Supply expanding - More volume accompanied by a longer decline.
Supply contracting - Less volume accompanied by a shorter decline.
Less support beneath price - Similar or lower volume produced the same or greater downward progress.
Selling effort absorbed - More volume produced a shorter decline, suggesting that selling effort encountered demand.
No material change - Neither volume nor price result changed sufficiently to exceed the selected Material Change Threshold.
CLIMAX ANALYSIS
A large wave is not classified as a confirmed climax merely because it has high volume. The script uses a staged process:
Possible buying climax:
An up-wave becomes a buying-climax candidate.
The next down-wave must produce the selected Renko reversal confirmation, which defaults to three boxes.
The immediately following up-wave is treated as the retest.
The buying climax is confirmed only when that next up-wave: has lower volume than the original climax up-wave; produces a shorter rise; and fails below the climax high. The comment can then state:
Buying climax confirmed -
Next up-wave retest failed below the climax high on lower volume - Possible selling climax
A down-wave becomes a selling-climax candidate. The next up-wave must produce the selected Renko reversal confirmation. The immediately following down-wave is treated as the test. The selling climax is confirmed only when that next down-wave: has lower volume than the original climax down-wave; produces a shorter decline; and holds above the climax low.
The comment can then state:
Selling climax confirmed -
Next down-wave test held above the climax low on lower volume
Only the immediate next corresponding up-wave or down-wave is used for the test. The script does not search through later waves to find a result that retrospectively fits the climax interpretation.
NO SUPPLY AND NO DEMAND
Possible no supply requires a down-wave that:
has lower volume than the previous down-wave;
produces a shorter decline; and
forms a higher low.
The following up-wave must then sustain the selected number of reversal boxes.
Possible no demand requires an up-wave that:
has lower volume than the previous up-wave;
produces a shorter rise; and
forms a lower high.
The following down-wave must then sustain the selected number of reversal boxes.
These are rule-based interpretations of wave behaviour. They are not substitutes for a full Wyckoff or VSA analysis of background, location and market structure.
DEVELOPING WAVES
The current wave comment can update dynamically as volume and Renko-box count accumulate.
Developing comments use provisional wording such as:
Demand currently expanding.
Supply currently contracting.
Buying effort currently absorbed.
Possible no supply.
Possible no demand.
A developing classification can change before the wave completes.
PROJECTION BOXES/BRICKS
PulseWire can display projection boxes/bricks while the source-timeframe bar remains open.
Projection does not mean that the script is forecasting future bricks. It means that current price before the time period close has already moved far enough to meet one or more Renko thresholds during the still-open source bar.
For example, on a Daily Renko chart:
intraday price movement can produce provisional Renko bricks;
those bricks can appear before the Daily bar closes;
they can change or disappear before the close;
they become part of the confirmed historical Renko structure only after the source bar is confirmed.
The same principle applies to Weekly and other source intervals.
Live statistics and developing comments should therefore be treated as provisional.
b]RENKO ASSIGNMENT METHODS
Traditional: Traditional uses a fixed price-unit assignment value.
If the PulseWire chart is set to: Traditional box size = 3, the indicator should normally also be set to the same Renko Assignment Method = Traditional Value = 3
The script cannot automatically read the Renko box-size setting from the PulseWire chart.
ATR: ATR derives the assignment value from Average True Range. The Value input represents the ATR lookback period rather than a fixed number of price points. ATR adapts to volatility, but changing box/brick size make historical box-count comparisons less directly uniform than Traditional sizing.
Part of Price: The inherited Part of Price method calculates close ÷ Value
For example: Value 20 = approximately 5% of price. This is not identical to PulseWire’s Percentage LTP Renko setting.
DISPLAY AND POSITIONING
The script includes adjustable controls for:
up-wave and down-wave histogram colours;
histogram transparency;
pivot statistics placement;
statistics font size;
statistics connector lines;
adjacent statistics-label stacking;
wave-comment font size and line wrapping;
wave-comment vertical and horizontal offsets;
adjacent wave-comment stacking;
comment connector lines;
Permanent Note position and dimensions;
Scenario Key position and dimensions.
Adjacent label and chart leg comment box stacking is optional. Because Pine cannot measure the rendered pixel width or height of labels, collision avoidance is based on bar distance and price-coordinate separation rather than exact screen-pixel boundaries. The user may need to adjust these settings in the user interface panel to avoid overlapping of labels and comment boxes.
SCENARIO KEY
The Scenario Key translates observable effort-and-result combinations into the primary wave comments used by the script.
The table also explains the structural sequences used for:
climax candidates;
confirmed buying and selling climaxes;
possible no supply;
possible no demand;
failed follow-through;
provisional current-wave conclusions.
TIMEFRAME CONSIDERATIONS
Changing the PulseWire chart timeframe changes the source data used to construct the Renko chart.
A Daily Renko structure and a Weekly Renko structure are therefore separate reconstructions, not merely different zoom levels of the same sequence.
Weekly charts may be useful for broad structural background.
Daily charts may provide more responsive directional changes.
Lower source intervals generally provide greater granularity but also produce more noise and more frequent projection box/brick changes.
LIMITATIONS
Renko charts use synthetic price construction.
The apparent Renko box/brick price is not always a directly tradable execution price.
Projection boxes/bricks can repaint while the source bar is open.
Historical calculations can change when:
the chart timeframe changes;
Renko settings change;
indicator assignment settings change;
additional lower-timeframe data becomes available;
PulseWire reconstructs the Renko history.
This indicator should not be used to assume fills at ideal Renko box/brick prices.
Any strategy testing should use confirmed signals and actual market OHLC prices, with appropriate allowance for spread, slippage and execution delay.
The script provides analytical context. It does not provide financial advice or guarantee that any identified climax, test, no-supply condition, no-demand condition or Renko reversal will lead to a profitable trade.
CREDITS
Original Weis Wave Volume script and core calculation: modhelius
This version is an amended and extended fork incorporating:
Renko peak and trough statistics;
wave box counts;
dynamic wave comments;
effort-versus-result classifications;
climax and test sequencing;
no-supply and no-demand analysis;
projection-brick context;
configurable display, positioning and overlap-management controls.
DEVELOPMENT CONTEXT
The extended analytical concept implemented in this fork was developed following James Knox ’s presentation to the "To The Tick" trading group on 20/7/26 combining:
TradeGuider VSA observations;
Wyckoff concepts of effort versus result, climaxes, tests, springs, no supply and no demand;
Weis Wave volume;
Renko changes of direction and structural pivots.
The script’s classifications and dynamic comments were developed to make those relationships more easily visible directly on the Renko chart. Indicator
Weis Wave with Main Pane Renko Volume LabelsWeis Wave with Renko Peak/Trough Volume Labels
This script is an amended/forked version of the original “Weis Wave Volume” indicator published by modhelius.
Full credit is given to modhelius for the original Weis Wave Volume calculation, Renko assignment methodology and histogram implementation. The original calculation has been retained, converted to Pine Script v6 and extended with automatic price-chart labels and connector lines.
OVERVIEW
The indicator accumulates volume, or True Range where selected, into directional Weis Waves. The completed wave values are displayed as columns in the lower indicator pane.
This amended version additionally places each completed Weis Wave value on the main Renko price chart at the corresponding wave peak or trough.
Up-wave values are displayed using green labels and down-wave values using red labels by default.
PEAK AND TROUGH LABELS
When a directional wave is completed:
• The script identifies the Renko box containing the actual peak or trough of that wave.
• The completed Weis Wave volume value is placed above or below that box, according to the user settings.
• A vertical connector line links the centre of the relevant Renko box to its value label.
• The label is positioned retrospectively at the completed wave extreme once the subsequent change of direction confirms the wave.
The labels therefore identify the completed wave rather than the first brick of the new opposing wave.
CURRENT UNCOMPLETED WAVE
An optional provisional label displays the accumulated value of the current uncompleted wave.
The provisional label:
• Moves when the current wave makes a new peak or trough.
• Updates as additional volume is accumulated.
• Uses a translucent label and dashed connector line to distinguish it from confirmed wave values.
• Remains subject to change until an opposing wave confirms completion.
The provisional label can be disabled independently.
USER SETTINGS
The script provides controls for:
• Renko assignment method: ATR, Traditional or Part of Price.
• Renko assignment value.
• Price source.
• Use of volume or True Range.
• Oscillating histogram display.
• Normalised wave values.
• Completed-wave labels on or off.
• Current uncompleted-wave label on or off.
• Peak-label placement above or below the peak.
• Trough-label placement above or below the trough.
• Independent peak and trough vertical distances.
• Distance measured in Renko boxes, minimum ticks or price units.
• Label font size.
• Connector lines on or off.
• Connector-line thickness.
• Volume-value divisor.
• Number of decimal places.
• Maximum number of historical labels retained.
TIMEFRAME
The indicator calculates using the current chart timeframe. It does not use a separate indicator timeframe because the Weis Wave calculation, Renko structure and price-chart labels must remain aligned.
RENKO CHART NOTE
Renko charts are synthetic charts constructed from price movement rather than fixed time intervals. Wave boundaries and accumulated volume values may therefore change when the chart timeframe, Renko method or Renko box size is changed.
For consistent comparisons, use the same Renko configuration and indicator settings.
This indicator is intended as an analytical visualisation tool. It does not generate trading entries, exits or investment recommendations.
CREDIT
Original Weis Wave Volume script and core calculation:
modhelius
Pine Script v6 conversion and extensions:
Automatic Renko peak/trough labels, adjustable positioning, connector lines and provisional current-wave display. Indicator
Smart Money Renko Matrix [MarkitTick]💡 The Smart Money Renko Matrix is a comprehensive, multi-dimensional analytical tool designed to bridge the gap between noise-free price action and complex market microstructure. By stripping away time-based market noise using an Average True Range (ATR) based price framework, this script isolates pure directional movement and volume distribution. It synthesizes Multiple Time Frame (MTF) trend convergence, order flow dynamics, and quantitative statistical exhaustion models into a single, cohesive interface. This indicator constructs a dynamic environment where traders can objectively measure trend strength, identify structural shifts, and manage risk systematically.
✨ Originality and Utility
Traditional indicators often rely on time-based charts, which can introduce significant noise during periods of high volatility or sideways consolidation. This script departs from the norm by utilizing a volatility-adjusted mathematical matrix to construct its baseline. What makes this tool exceptionally useful is its ability to merge quantitative statistical models—such as Z-Score based trend exhaustion and rolling Volume Profile Point of Control (POC)—with modern structural market concepts. Instead of viewing trend, volume, and structure as isolated elements, this script computes a unified algorithmic score, presenting actionable setups without the clutter of traditional multi-indicator chart layouts.
🔬 Methodology and Concepts
● Volatility-Adjusted Baseline
The core of the script calculates synthetic open, close, and volume values using an underlying ATR resolution. This ensures that a new computational block is only formed when price moves beyond a dynamically adjusting volatility threshold, completely disregarding the passage of time.
● Multiple Time Frame (MTF) Convergence
The script evaluates trend momentum across three independent higher timeframes (e.g., 1H, 4H, Daily) by measuring price relative to a 50-period Exponential Moving Average (EMA). It assigns a logical integer score. A trend is only considered fully converged (Bullish or Bearish) if it achieves a score of 2 or higher across the matrix, filtering out lower-timeframe false breaks.
● Quantitative Z-Score Trend Exhaustion
To identify overextended movements, the script maintains a dynamic array of historical directional streaks. It calculates the rolling mean and standard deviation of these streaks. When a current directional run exceeds a Z-Score of 2.0 (meaning it is two standard deviations beyond the historical average), the trend is mathematically flagged as exhausted, warning of a high-probability mean reversion event.
● Rolling Volume Profile and Point of Control (POC)
A continuous volume profile is constructed by indexing the traded volume at specific price levels over a rolling 100-block window. The algorithmic engine identifies the price node with the maximum aggregated volume, establishing the dynamic Point of Control (POC), which serves as a highly reactive structural support or resistance level.
● Structural Sweeps and Order Blocks
The logic continuously scans for structural liquidity sweeps. A sweep occurs when price pierces a predefined historical high or low (based on user lookback) but fails to close beyond it, indicating trapped volume. Following a confirmed sweep and a change in directional momentum, the system algorithmically generates boundary boxes that represent significant structural order blocks.
🎨 Visual Guide
● Heatmap Candles
Bullish Streaks: Represented by a color gradient starting from Dark Green and transitioning to Bright Green as the directional streak matures.
Bearish Streaks: Represented by a color gradient starting from Dark Red and transitioning to Bright Orange.
Exhaustion State: If the Z-Score exhaustion threshold is breached, the candles become highly transparent or gray, visually warning of a fading trend.
● Core Matrix Lines
Renko Upper/Lower Bounds: Solid lines plotting the mathematical extremes of the current volatility block.
Renko Midline: A dotted line tracking the exact median of the active block structure.
Reversal Close: Prominent circular markers highlighting the exact pivot point where the directional streak changes state.
● Risk Management Visuals
Trailing Stop: A dashed line appearing below bullish price action or above bearish price action, dictating the dynamic trailing invalidation level.
Entry and Target Lines: When a setup triggers, a distinct set of dashed lines appear: Gold for the Entry price, Pink for the Stop Loss (SL), Cyan for Take Profit 1 (TP1), Blue for Take Profit 2 (TP2), and Orange for Take Profit 3 (TP3). Small textual labels accompany each line displaying the exact price.
● Order Flow and Structural Shapes
Sweep Labels: Small text labels reading "Liq" appear above or below the wicks when a structural sweep is confirmed.
Wick Rejections: Displayed as small cross shapes (`xcross`). Pink crosses above price denote clustered bearish rejections; Cyan crosses below denote clustered bullish rejections.
Volume Divergence: Small circular shapes appear above or below the bar when a directional push occurs without the support of a moving average volume breakout, signaling potential weakness.
● Heads-Up Dashboard
A specialized table located in the top right corner. It displays the current ticker, active timeframe, the MTF Convergence Tier score (color-coded green or orange), the dynamic block size in absolute price terms, the current Volume Profile POC level, and the calculated numerical values for the active Entry, SL, and TP targets.
📖 How to Use
● Identifying Trend Direction
Observe the primary color gradient of the main chart layout. Trade strictly in the direction of the bright, saturated colors. Ensure that the dashboard confirms the trend with a "Tier 2" or "Tier 3" MTF Convergence score before looking for entries.
● Spotting Reversals
Wait for the emergence of a Liquidity Sweep label ("Liq"). Once this prints, monitor the chart for a color transition (e.g., green shifting to red). A reversal is further validated if a structural Order Block box is painted immediately following the sweep, or if exhaustion logic visually grays out the prior trend.
● Executing and Managing Risk
When a directional change occurs that aligns with the higher timeframe score, utilize the auto-generated dashed risk lines. Place your entry at the Gold dashed line. Set your structural invalidation at the Pink dashed line. As price progresses, manually scale out of the position by targeting the Cyan, Blue, and Orange dashed lines. Utilize the dynamic trailing stop line to protect open profits as the trend matures.
⚙️ Inputs and Settings
• Volatility Settings
Adjust the base lookback period for the Average True Range calculation. Increasing the multiplier directly increases the price distance required to generate a new block, effectively filtering out more noise but delaying signal generation.
• Visual Gradients
Users can customize the starting and ending colors for both bullish and bearish streaks, as well as define the specific streak depth required to reach maximum color saturation.
• Risk Management Configurations
Allows traders to toggle between dynamic standard risk or structure-based stop losses. Users can input specific multiplier values to independently adjust the distance of the Stop Loss and all three Take Profit levels.
• MTF Tier Scoring
Select the three specific higher timeframes the algorithmic engine will use to calculate the baseline trend momentum. By default, these are structured as Intraday, Medium, and Macro.
• Structural Lookbacks
Define the historical bar count used to identify major swing points. A higher lookback period will result in fewer, but mathematically more significant, sweep identifications and order block generation.
🔍 Deconstruction of the Underlying Scientific and Academic Framework
● Absolute Mean Deviation and ATR Computation
The foundational framework of this matrix relies on the Average True Range, a volatility metric introduced by J. Welles Wilder. The script calculates the greatest of the current high minus the current low, the absolute value of the current high minus the previous close, and the absolute value of the current low minus the previous close. By applying a smoothing function to this true range over a defined period, the script normalizes the non-stationary nature of financial time series into a standardized unit of volatility.
● Standard Score (Z-Score) Application on Serial Dependence
To model trend exhaustion quantitatively, the script measures the serial dependence of consecutive directional outcomes (streaks). By storing the historical lengths of these streaks in a dynamically updating array, the engine computes the population mean (μ) and standard deviation (σ). The current streak length (x) is evaluated using the standard Z-Score formula: z = (x - μ) / σ. A result greater than 2.0 indicates that the current movement lies beyond the 95th percentile of the normal distribution curve, mathematically classifying the trend as statistically anomalous and prone to immediate mean reversion.
● Volume Distribution Theory
The Point of Control (POC) logic is rooted in volume distribution profiling. It assumes that market participants execute trades at equilibrium prices. By segmenting the Y-axis into distinct price nodes and accumulating the corresponding traded volume over a rolling lookback window, the script identifies the mode of the distribution curve. This maximum volume node represents the price level with the highest historical consensus of value, naturally acting as a dense algorithmic barrier for future price action.
⚠️ Disclaimer
All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. We expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion. Indicator
Renko Heatmap Pro [MarkitTick]💡 Multi-faceted trend analysis and price action visualization system engineered to filter out time-based market noise and strictly highlight price momentum. By computing synthetic Renko bricks directly on your traditional time-based chart, this tool overlays a completely volatility-adjusted perspective of the market. It seamlessly integrates a streak-based momentum heatmap, dynamic support and resistance tracking, and a comprehensive risk-management dashboard into a single, cohesive interface. This allows analysts to visualize trend maturity, identify precise structural shifts, and monitor key risk metrics without relying on lagging, time-dependent oscillators.
✨ Originality and Utility
Standard charting relies on fixed time intervals, which often introduces "noise"—price fluctuations that occur simply because time is passing, not because structural momentum is shifting. The utility of this indicator lies in its ability to reconstruct the market using Average True Range (ATR) based Renko methodology natively over standard candlesticks.
What sets this script apart is its Streak Engine and Gradient Color framework. Instead of merely showing bullish or bearish states, the indicator quantifies trend depth. It tracks consecutive directional blocks and dynamically adjusts the visual weighting (heatmap) based on the longevity of the trend. This is further hybridized with an automated risk-management engine that calculates dynamic Stop Loss (SL) and Take Profit (TP) levels, alongside trailing stops and historical support/resistance levels that visually "fade" as they age. This creates an all-in-one suite for trend-following and structural analysis.
🔬 Methodology and Concepts
● Renko Ticker Construction
The script bypasses standard open, high, low, close (OHLC) bar data for its core signals, instead utilizing a secondary data request to construct ATR-based Renko blocks. A Renko brick is only formed when price moves a specified distance, completely disregarding the time it takes to make that move. In this system, the brick size is defined by the ATR, ensuring the threshold adapts to current market volatility.
● The Streak Engine
Every time a new Renko brick is formed in the same direction as the previous one, the internal streak counter increases. If a bullish brick follows a bullish brick, the count iterates upward. If a bearish brick prints, the bullish streak breaks, resetting the count and initiating a bearish streak. This creates a quantitative measure of trend duration and exhaustion.
● Dynamic Risk Management Engine
Using the confirmed close of the previous Renko block, the system calculates algorithmic risk parameters. Stop Loss and Take Profit levels are calculated as distinct ATR multiples extending outward from the confirmed entry price. A trailing stop is also maintained, dynamically tightening behind the trend (higher in a bull trend, lower in a bear trend) and only resetting when the Renko structure reverses.
● Historical S/R Decay Logic
When a reversal occurs, the open price of that reversal block is recorded as a structural pivot. The indicator logs this price point and tracks its age (in bars). As time progresses, the visual representation of this level fades out, acknowledging the market theory that older, untested levels gradually lose their structural relevance compared to fresh pivots.
🎨 Visual Guide
● Heatmap Candles
Trend Maturation (Gradients): The candlestick bodies are overridden with a heatmap gradient. A new bullish trend starts with a deep blue color and transitions toward a bright cyan as the streak extends. A bearish trend starts deep red and transitions to a bright orange/yellow as it matures.
Stagnation: If a bar does not generate a new Renko block, it is colored a muted gray, signaling a period of consolidation where the volatility threshold hasn't been met.
● Structural Plot Lines
OC Core Zone: A semi-transparent filled channel on the chart representing the upper and lower boundaries of the current active Renko block.
Renko Midline: A dotted line tracking the exact mathematical center of the active block.
Reversal Close Circles: Prominent circular plots that appear exclusively when a structural trend reversal is confirmed, marking a potential entry or exit node.
Trailing Stop: A dashed line trailing behind the current price action, colored dynamically based on the active trend (cyan for bullish support, orange for bearish resistance).
Support/Resistance (S/R) Lines: Dotted horizontal lines extending from past reversal points. Their opacity visually fades the longer they remain on the chart.
● On-Chart Shapes and Labels
Signal Triangles: Distinct ▲ BUY (below bar) and ▼ SELL (above bar) shapes accompanied by text, printed precisely when the Renko direction shifts.
Box Count Label: A small, dynamic text label appearing at reversals to indicate exactly how many consecutive boxes the previous structural leg lasted.
● The Dashboard Panel
Located in the top right corner, this heads-up display provides real-time quantitative metrics:
Trend Bias: Text readout of the current structural direction (Bull/Bear).
Streak Depth: A 10-block visual bar (e.g., ████░░░░░░) showing how far along the current trend is relative to the user-defined maximum gradient depth.
R:R Quality: A visual score rating the current Reward-to-Risk ratio based on the dynamic SL/TP levels.
Actionable Prices: Exact price readouts for Entry, Stop Loss, Take Profit, and the Trailing Stop.
📌 Important note : the best way to resolve visual overlap is to navigate to the Object Tree and drag the indicator above the main chart layer, or simply hide the native candles in your chart settings.
📖 How to Use
● Trend Identification and Exhaustion
Traders can monitor the Heatmap Candles to gauge both direction and maturity. When the candles transition from their starting colors (dark blue / deep red) to their terminal colors (bright cyan / bright orange), it indicates that the trend streak is becoming highly extended. An extended streak does not automatically imply a reversal, but it suggests momentum has been sustained for an extended period, which may precede a consolidation or pullback.
● Entry and Execution
A primary use case is waiting for a confirmed trend shift. When a reversal is validated, the indicator plots the Reversal Close Circle and the ▲ BUY / ▼ SELL shape. Traders can use the Dashboard Panel to immediately read the calculated Entry, SL, and TP prices.
● Managing Risk In-Trade
Once a position is active, the Trailing Stop dashed line provides a dynamic, structural level to trail a stop-loss. Additionally, traders can monitor price action as it approaches the historical dotted S/R lines. If price approaches a sharply colored (recent) S/R line, higher friction is expected. If it approaches a heavily faded (old) line, the level may carry less structural weight.
Note on Data Resolution: Because this tool queries secondary Renko data using the current chart's resolution and employs lookahead functionality on historical data, real-time current-bar fluctuations may briefly cross thresholds before closing. Decisions should strictly be made on confirmed bar closes, as indicated by the script's internal logic.
⚙️ Inputs and Settings
● ◈ Renko
ATR Length: The lookback period used to calculate the Average True Range, determining the size of the underlying Renko bricks.
ATR Resolution ×: A multiplier to scale the resolution up for higher-timeframe smoothing.
● ◈ Visuals
Bull/Bear Colors (Start & End): Customization for the heatmap gradients. You can define the exact color of a fresh trend and an exhausted trend.
Gradient Streak Depth: The number of consecutive bricks required to reach the "End" color. A higher number stretches the gradient over a longer trend.
● ◈ Risk Management
Dynamic SL/TP in Alerts: Toggles whether the SL and TP values are dynamically injected into the outgoing Webhook alert JSON.
SL / TP ATR Multiplier: Defines the distance (in ATR units) from the entry point to calculate the Stop Loss and Take Profit levels.
Show Trailing Stop Line: Toggles the visibility of the dynamic trailing stop boundary.
● ◈ Structure Analysis
Show S/R Levels & Max Levels: Toggles the historical reversal lines and sets a hard limit on how many previous levels are maintained on the chart to prevent clutter.
S/R Fade Age (bars): Determines how quickly the S/R lines lose their opacity as time passes.
● ◈ Webhook Actions
Configurable string inputs to match your specific execution bot commands (e.g., "long", "short", "closelong"). These are embedded into the JSON payload triggered by the indicator's alerts.
🔍 Deconstruction of the Underlying Scientific and Academic Framework
● Market Noise and the Random Walk
In quantitative finance, high-frequency price data is often modeled with components of a Brownian motion or a Random Walk, where short-term movements contain significant "noise" (stochastic variation) independent of the underlying drift (trend). Standard time-based sampling captures all of this variance. By utilizing a Renko construction, this indicator applies a discrete filtration mechanism. It mathematically suppresses localized stochastic volatility by requiring price to traverse a minimum Euclidean distance (the ATR block size) before registering a state change.
● Volatility Clustering and Adaptive Thresholds
Mandelbrot and subsequent econometricians noted that market volatility clusters—periods of high variance are followed by high variance. Using a static brick size in Renko fails to account for leptokurtic market distributions. By anchoring the block size to the Average True Range, the indicator's filtration threshold becomes adaptive. During periods of volatility expansion, the required threshold widens, preventing the streak engine from being whipsawed by natural variance expansion.
● Momentum Decay and Mean Reversion Probability
The Gradient Streak Depth concept relies on the statistical premise of mean reversion following extended standard deviations from a mean. While trends can persist, the probability of a structural pullback increases as the streak count grows. The heatmap visually represents this probability density—translating a quantitative sequential count into a qualitative visual exhaustion metric, aiding in the assessment of asymmetric risk distribution.
⚠️ Disclaimer
All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. I expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion. Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Forex Renko LeaderboardForex Warlord: Kinetic Velocity Leaderboard
This indicator is a specialized dashboard designed to rank the 7 Major Forex pairs based on their real-time "Kinetic Velocity" and acceleration. Unlike standard strength meters that measure relative price change, the Warlord Engine calculates exactly how fast a pair is generating net profits per second, accounting for the "Physics" of the market: drag (spread costs) and inertia (lag).
It is designed specifically for momentum traders who need to know not just which pair is moving, but which pair is moving fast enough to overcome the cost of the spread and generate immediate net return.
HOW IT WORKS
The script runs a "Virtual Renko" simulation on your time-based chart (works best on 1-second or 1-minute timeframes). It tracks price movement in "Bricks" and calculates a standardized "Score" for each pair.
The Score represents "Net Pips per Second."
-- A positive score (> 0.00) means the price is moving fast enough to clear the spread and generate profit.
-- A negative score (< 0.00) means the price is moving too slowly, and the spread cost is eating the volatility.
The system then applies a "Smart Decay" penalty. If a pair is moving fast but starting to decelerate (slowing down), its score is penalized to prevent you from buying the top.
HOW TO USE IT
1. Attach the indicator to any chart (EURUSD, 1-Second or 1-Minute recommended for high-speed scalping).
2. Look at the Dashboard on the right side of the screen.
3. Identify the Rank #1 Pair. This is the currency currently moving with the highest velocity.
4. Check the "Action" Column:
-- TRADE (Green): The pair is Rank #1 AND its velocity is high enough to be profitable.
-- NO TRADE (Red): The pair is moving too slowly, or the spread cost is too high relative to the move.
-- SPREAD > MAX (Red): The calculated move does not clear your specified "Max Broker Cost."
-- NO TRADE (ZONE) (Red): The market is in the "Dead Zone" (typically 17:00-18:00 EST), where spreads widen and liquidity vanishes.
5. Check the "State" Icon:
-- Rocket: The pair is accelerating. This is the ideal entry signal.
-- Warning: The pair is decelerating. Caution is advised as momentum is fading.
ALERTS
The indicator features a built-in alert system. You can create an alert in PulseWire to notify you specifically when the "Renko Leaderboard Ranking" changes. This allows you to wait for the market to tell you which pair is taking the lead without staring at the screen.
INPUTS & SETTINGS
-- Renko Brick Size (Pips): The most critical tuning knob. Determines the sensitivity of the engine. Smaller bricks (e.g., 2-3 pips) make it hyper-sensitive for scalping. Larger bricks (e.g., 10 pips) tune it for swing trends. Changing this instantly recalculates the entire board.
-- Max Broker Cost (Pips): Your "Hurdle Rate." If a pair's projected profit does not clear this cost (default 1.0 pip), the dashboard will forbid the trade.
-- Dead Zone Start/End (Hour): Hard-coded risk management. By default, it blocks all signals between 17:00 and 18:00 EST (New York Close) to protect you from high-spread rollover hours.
-- HMA Time Dilation: A smoothing factor to prevent noise on 1-second charts.
DISCLAIMER
This tool is for informational purposes only. It measures past velocity to rank current momentum. Past performance is not indicative of future results. Always verify the actual bid/ask spread on your broker before executing, as the script uses a fixed spread calculation. Indicator
Renko Velocity Meter [Chris Chapman]Here is the comprehensive copy for your Renko Velocity Meter indicator. This is structured to be used in a PulseWire description, a manual, or a product listing.
Renko Velocity Meter
What is this Indicator?
The Renko Velocity Meter is a specialized momentum dashboard designed strictly for Renko Charts. Unlike standard oscillators (like RSI or MACD) which often fail on Renko due to the lack of time-based data, this tool uses "Brick Physics" to measure the actual speed and efficiency of price movement.
It answers the most critical question in Renko trading: "Is this a real trend, or just a choppy consolidation?"
Instead of giving you lagging signals, it provides a real-time Velocity Score (0-100) displayed on a dashboard directly on your chart. It automatically filters out "fake" moves and highlights high-probability "TURBO" conditions when the market enters a powerful extension phase.
How It Is Calculated
The Velocity Score is derived from a proprietary blend of three distinct mathematical checks:
1. Trend Efficiency ("The Snake Logic") The script calculates the ratio between the Net Price Move and the Total Distance Traveled over a lookback period.
High Efficiency: Price is moving in a straight line (Strong Trend).
Low Efficiency: Price is winding back and forth (Chop/Range).
2. Momentum Deviation (Auto-Brick Detection) The indicator automatically detects your specific Renko brick size (whether 2 pips, 10 points, or custom) without manual input. It then measures how many "Bricks" the price has pulled away from the baseline Moving Average.
If price is 6+ bricks away from the average, it signals a high-momentum extension.
3. HTF Trend Lock (Multi-Timeframe Filter) It internally checks a Higher Timeframe (default: 15-minute) to ensure you are trading with the dominant trend.
HTF LOCK: The Renko trend and the 15m trend are aligned (Green).
HTF MIX: The trends are conflicting. The score is automatically capped at 60 to prevent false signals.
4. The "Counter-Trend" Penalty To prevent buying tops or selling bottoms, the script instantly penalizes the score if a "Retracement Brick" forms.
Example: If the trend is UP, but a RED brick forms, the score is forced down to the "Yellow/Neutral" zone until the trend resumes.
Requirements
To use this indicator effectively, you must meet the following chart conditions:
Chart Type: Renko (This is mandatory. The math relies on fixed-size bricks).
Timeframe: Works on all timeframes, but optimized for standard scalping setups (e.g., 2-pip fixed bricks on EURUSD/Gold).
Data Feed: High-quality data is recommended. For maximum precision, use a 1-second (1s) interval setting for your Renko box generation if your PulseWire plan allows it.
The Inputs (Settings)
You can customize the sensitivity of the meter to fit your specific asset class:
Trend Efficiency Period (Default: 14):
The number of bricks used to calculate how "straight" the trend is. Lower numbers make the score faster; higher numbers make it smoother.
Momentum Baseline (Default: 20):
The length of the internal Moving Average used as the "mean" price.
Max Momentum in Bricks (Default: 6):
How many bricks of extension are required to hit a "100% Score"? Increase this for volatile assets like Gold or Bitcoin.
HTF Support (Default: 15):
The Higher Timeframe used for the Trend Lock filter.
Meter Position:
Choose where the dashboard appears on your screen (Top Right, Bottom Left, etc.).
Dashboard Legend
GREEN (Score > 70): TURBO – Strong trend alignment. High probability of continuation.
YELLOW (Score 50-70): TREND – Active trend, but potentially stalling or retracing.
RED (Score < 50): CHOP – No clear direction or conflicting signals. Stay flat.
POSITION: Shows the current logic state (LONG/SHORT/FLAT). Indicator
Dynamic ATR-based Renko Overlay - Non repaintingDaily ATR-Based Renko Overlay
Overview
This Pine Script v5 indicator creates a dynamic Renko overlay on your time-based charts (optimized for 1-minute timeframes), using the previous period's ATR from a user-specified higher timeframe (default: 1-hour) to determine brick sizes. Unlike traditional Renko charts, this is an overlay that draws Renko bricks directly on top of your existing candles, allowing you to combine the noise-filtering power of Renko with the full features of time-based charts.
It's designed for traders who want Renko's trend-clarity benefits without switching chart types, especially useful for intraday trading in volatile markets like forex, stocks, or crypto.
Key Features
- Adaptive Brick Sizing: Brick size is calculated as a percentage (default 40%) of the previous period's ATR (Average True Range, default length 14) from the selected higher timeframe (default: 1-hour). This makes bricks volatility-adjusted—larger in high-vol periods to reduce noise, smaller in low-vol for more detail.
- Periodic Recalculation: Resets brick size at the start of each new period based on the user-specified reset timeframe (default: daily), using the prior period's ATR from the chosen timeframe. This ensures relevance without unwanted disruptions.
- Traditional Renko Logic: Uses 1-box reversal (a full brick against the trend to reverse). Bricks form based on closing prices, ignoring time and minor fluctuations.
- Visual Style: Stepped lines with green (up) and red (down) fills for a box-like appearance. Semi-transparent for easy overlay on candles.
- Customizable Inputs:
- ATR Length: Adjust the ATR period (default: 14).
- Percentage of ATR: Fine-tune brick sensitivity (default: 0.4 or 40%; range 0-1).
- ATR Timeframe: Specify the timeframe for ATR calculation (default: "60" for 1-hour; enter as a string like "240" for 4-hour, "D" for daily, etc.).
- Reset Timeframe: Specify the period for recalculating the brick size (default: "D" for daily; enter as a string like "W" for weekly, "M" for monthly, etc.).
How It Works
1. Fetches ATR from the user-specified timeframe via `request.security` for higher-timeframe volatility data.
2. On new periods based on the reset timeframe (or first load), sets brick size to `percent * ATR_HTF`.
3. Tracks Renko "close" and "previous close" to calculate bricks:
- Upward moves add green bricks in multiples of the size.
- Downward moves add red bricks.
- Reversals require a full brick against the direction.
4. Plots and fills create the overlay, updating on each 1-min bar close.
Add it to a 1-minute chart for best results—bricks will adapt periodically while you retain full candle visibility.
Why This Indicator is Helpful
PulseWire's native Renko charts are powerful but come with limitations that can frustrate serious traders:
- No Bar Replay: Native Renko doesn't support PulseWire's bar replay feature, making it hard to simulate historical trading sessions.
- Inaccurate/Repainting Strategy Testing: Strategies on native Renko can repaint or lack precision due to the non-time-based nature, leading to unreliable backtests.
- Limited Data History: Fast Renko timeframes (e.g., small bricks) often load very little historical data, restricting long-term analysis.
This overlay solves these by building Renko on a time-based chart:
- Full Bar Replay Support: Replay sessions as usual on your 1-min chart—the Renko follows along.
- Accurate, Non-Repainting Testing: Test strategies on the underlying time chart without repainting issues, as Renko is derived from closes.
- Unlimited Data Depth: Access PulseWire's full historical data for 1-min charts (up to years of bars), not limited by Renko's data constraints.
- Hybrid Analysis: Overlay Renko on candles to spot trends while using volume, indicators (e.g., RSI, MAs), or drawing tools that don't work well on native Renko.
It's a game-changer for trend-following, breakout strategies, or filtering noise in short-term trades. No more switching charts—get the best of both worlds!
Usage Tips
- Best on 1-min charts for intraday precision, but experiment with others.
- Tune the percentage lower (e.g., 0.3) for more bricks/sensitivity, higher (e.g., 0.5) for fewer/false-signal reduction.
- Adjust the ATR timeframe to match your strategy—e.g., "240" for longer-term volatility or "15" for shorter.
- Customize the reset timeframe for different recalculation frequencies—e.g., "W" for weekly resets to capture broader market shifts, or "240" for every 4 hours.
- Combine with alerts: right now I am experimenting with 90 period EMA and the Renko brick pullbacks to find some EDGE
If you find this useful, give it a thumbs up or share your tweaks in the comments. Feedback welcome—happy trading! 🚀 Indicator
Indicator
Superior-Range Bound Renko - Alerts - 11-29-25 - Signal LynxSuperior-Range Bound Renko – Alerts Edition with Advanced Risk Management Template
Signal Lynx | Free Scripts supporting Automation for the Night-Shift Nation 🌙
1. Overview
This is the Alerts & Indicator Edition of Superior-Range Bound Renko (RBR).
The Strategy version is built for backtesting inside PulseWire.
This Alerts version is built for automation: it emits clean, discrete alert events that you can route into webhooks, bots, or relay engines (including your own Signal Lynx-style infrastructure).
Under the hood, this script contains the same core engine as the strategy:
Adaptive Range Bounding based on volatility
Renko Brick Emulation on standard candles
A stack of Laguerre Filters for impulse detection
K-Means-style Adaptive SuperTrend for trend confirmation
The full Signal Lynx Risk Management Engine (state machine, layered exits, AATS, RSIS, etc.)
The difference is in what we output:
Instead of placing historical trades, this version:
Plots the entry and RM signals in a separate pane (overlay = false)
Exposes alertconditions for:
Long Entry
Short Entry
Close Long
Close Short
TP1, TP2, TP3 hits (Staged Take Profit)
This makes it ideal as the signal source for automated execution via PulseWire Alerts + Webhooks.
2. Quick Action Guide (TL;DR)
Best Timeframe:
4H and above. This is a swing-trading / position-trading style engine, not a micro-scalper.
Best Assets:
Volatile but structured markets, e.g.:
BTC, ETH, XAUUSD (Gold), GBPJPY, and similar high-volatility majors or indices.
Script Type:
indicator() – Alerts & Visualization Only
No built-in order placement
All “orders” are emitted as alerts for your external bot or manual handling
Strategy Type:
Volatility-Adaptive Trend Following + Impulse Detection
using Renko-like structure and multi-layer Laguerre filters.
Repainting:
Designed to be non-repainting on closed candles.
The underlying Risk Management engine is built around previous-bar data (close , high , low ) for execution-critical logic.
Intrabar values can move while the bar is forming (normal for any advanced signal), but once a bar closes, the alert logic is stable.
Recommended Alert Settings:
Condition: one of the built-in signals (see section 3.B)
Options: “Once Per Bar Close” is strongly recommended for automation
Message: JSON, CSV, or simple tokens – whatever your webhook / relay expects
3. Detailed Report: How the Alerts Edition Works
A. Relationship to the Strategy Version
The Alerts Edition shares the same internal logic as the strategy version:
Same Adaptive Lookback and volatility normalization
Same Range and Close Range construction
Same Renko Brick Emulator and directional memory (renkoDir)
Same Fib structures, Laguerre stack, K-Means SuperTrend, and Baseline signals (B1, B2)
Same Risk Management Engine and layered exits
In the strategy script, these signals are wired into strategy.entry, strategy.exit, and strategy.close.
In the alerts script:
We still compute the final entry/exit signals (Fin, CloseEmAll, TakeProfit1Plot, etc.)
Instead of placing trades, we:
Plot them for visual inspection
Expose them via alertcondition(...) so that PulseWire can fire alerts.
This ensures that:
If you use the same settings on the same symbol/timeframe, the Alerts Edition and Strategy Edition agree on where entries and exits occur.
(Subject only to normal intrabar vs. bar-close differences.)
B. Signals & Alert Conditions
The alerts script focuses on discrete, automation-friendly events.
Internally, the main signals are:
Fin – Final entry decision from the RM engine
CloseEmAll – RM-driven “hard close” signal (for full-position exits)
TakeProfit1Plot / 2Plot / 3Plot – One-time event markers when each TP stage is hit
On the chart (in the separate indicator pane), you get:
plot(Fin) – where:
+2 = Long Entry event
-2 = Short Entry event
plot(CloseEmAll) – where:
+1 = “Close Long” event
-1 = “Close Short” event
plot(TP1/TP2/TP3) (if Staged TP is enabled) – integer tags for TP hits:
+1 / +2 / +3 = TP1 / TP2 / TP3 for Longs
-1 / -2 / -3 = TP1 / TP2 / TP3 for Shorts
The corresponding alertconditions are:
Long Entry
alertcondition(Fin == 2, title="Long Entry", message="Long Entry Triggered")
Fire this to open/scale a long position in your bot.
Short Entry
alertcondition(Fin == -2, title="Short Entry", message="Short Entry Triggered")
Fire this to open/scale a short position.
Close Long
alertcondition(CloseEmAll == 1, title="Close Long", message="Close Long Triggered")
Fire this to fully exit a long position.
Close Short
alertcondition(CloseEmAll == -1, title="Close Short", message="Close Short Triggered")
Fire this to fully exit a short position.
TP 1 Hit
alertcondition(TakeProfit1Plot != 0, title="TP 1 Hit", message="TP 1 Level Reached")
First staged take profit hit (either long or short). Your bot can interpret the direction based on position state or message tags.
TP 2 Hit
alertcondition(TakeProfit2Plot != 0, title="TP 2 Hit", message="TP 2 Level Reached")
TP 3 Hit
alertcondition(TakeProfit3Plot != 0, title="TP 3 Hit", message="TP 3 Level Reached")
Together, these give you a complete trade lifecycle:
Open Long / Short
Optionally scale out via TP1/TP2/TP3
Close remaining via Close Long / Close Short
All while the Risk Management Engine enforces the same logic as the strategy version.
C. Using This Script for Automation
This Alerts Edition is designed for:
Webhook-based bots
Execution relays (e.g., your own Lynx-Relay-style engine)
Dedicated external trade managers
Typical setup flow:
Add the script to your chart
Same symbol, timeframe, and settings you use in the Strategy Edition backtests.
Configure Inputs:
Longs / Shorts enabled
Risk Management toggles (SL, TS, Staged TP, AATS, RSIS)
Weekend filter (if you do not want weekend trades)
RBR-specific knobs (Adaptive Lookback, Brick type, ATR vs Standard Brick, etc.)
Create Alerts for Each Event Type You Need:
Long Entry
Short Entry
Close Long
Close Short
TP1 / TP2 / TP3 (optional, if your bot handles partial closes)
For each:
Condition: the corresponding alertcondition
Option: “Once Per Bar Close” is strongly recommended
Message:
You can use structured JSON or a simple token set like:
{"side":"long","event":"entry","symbol":"{{ticker}}","time":"{{timenow}}"}
or a simpler text for manual trading like:
LONG ENTRY | {{ticker}} | {{interval}}
Wire Up Your Bot / Relay:
Point PulseWire’s webhook URL to your execution engine
Parse the messages and map them into:
Exchange
Symbol
Side (long/short)
Action (open/close/partial)
Size and risk model (this script does not position-size for you; it only signals when, not how much.)
Because the alerts come from a non-repainting, RM-backed engine that you’ve already validated via the Strategy Edition, you get a much cleaner automation pipeline.
D. Repainting Protection (Alerts Edition)
The same protections as the Strategy Edition apply here:
Execution-critical logic (trailing stop, TP triggers, SL, RM state changes) uses previous bar OHLC:
open , high , low , close
No security() with lookahead or future-bar dependencies.
This means:
Alerts are designed to fire on states that would have been visible at bar close, not on hypothetical “future history.”
Important practical note:
Intrabar: While a bar is forming, internal conditions can oscillate.
Bar Close: With “Once Per Bar Close” alerts, the fired signal corresponds to the final state of the engine for that candle, matching your Strategy Edition expectations.
4. For Developers & Modders
You can treat this Alerts script as an ”RM + Alert Framework” and inject any signal logic you want.
Where to plug in:
Find the section:
// BASELINE & SIGNAL GENERATION
You’ll see how B1 and B2 are built from the RBR stack and then combined:
baseSig = B2
altSig = B1
finalSig = sigSwap ? baseSig : altSig
To use your own logic:
Replace or wrap the code that sets baseSig / altSig with your own conditions:
e.g., RSI, MACD, Heikin Ashi filters, candle patterns, volume filters, etc.
Make sure your final decision is still:
2 → Long / Buy signal
-2 → Short / Sell signal
0 → No trade
finalSig is then passed into the RM engine and eventually becomes Fin, which:
Drives the Long/Short Entry alerts
Interacts with the RM state machine to integrate properly with AATS, SL, TS, TP, etc.
Because this script already exposes alertconditions for key lifecycle events, you don’t need to re-wire alerts each time — just ensure your logic feeds into finalSig correctly.
This lets you use the Signal Lynx Risk Management Engine + Alerts wrapper as a drop-in chassis for your own strategies.
5. About Signal Lynx
Automation for the Night-Shift Nation 🌙
Signal Lynx builds tools and templates that help traders move from:
“I have an indicator” → “I have a structured, automatable strategy with real risk management.”
This Superior-Range Bound Renko – Alerts Edition is the automation-focused companion to the Strategy Edition. It’s designed for:
Traders who backtest with the Strategy version
Then deploy live signals with this Alerts version via webhooks or bots
While relying on the same non-repainting, RM-driven logic
We release this code under the Mozilla Public License 2.0 (MPL-2.0) to support the Pine community with:
Transparent, inspectable logic
A reusable Risk Management template
A reference implementation of advanced adaptive logic + alerts
If you are exploring full-stack automation (PulseWire → Webhooks → Exchange / VPS), keep Signal Lynx in your search.
License: Mozilla Public License 2.0 (Open Source).
If you build improvements or helpful variants, please consider sharing them back with the community. Indicator
Superior-Range Bound Renko - Strategy - 11-29-25 - SignalLynxSuperior-Range Bound Renko Strategy with Advanced Risk Management Template
Signal Lynx | Free Scripts supporting Automation for the Night-Shift Nation 🌙
1. Overview
Welcome to Superior-Range Bound Renko (RBR) — a volatility-aware, structure-respecting swing-trading system built on top of a full Risk Management (RM) Template from Signal Lynx.
Instead of relying on static lookbacks (like “14-period RSI”) or plain MA crosses, Superior RBR:
Adapts its range definition to market volatility in real time
Emulates Renko Bricks on a standard, time-based chart (no Renko chart type required)
Uses a stack of Laguerre Filters to detect genuine impulse vs. noise
Adds an Adaptive SuperTrend powered by a small k-means-style clustering routine on volatility
Under the hood, this script also includes the full Signal Lynx Risk Management Engine:
A state machine that separates “Signal” from “Execution”
Layered exit tools: Stop Loss, Trailing Stop, Staged Take Profit, Advanced Adaptive Trailing Stop (AATS), and an RSI-style stop (RSIS)
Designed for non-repainting behavior on closed candles by basing execution-critical logic on previous-bar data
We are publishing this as an open-source template so traders and developers can leverage a professional-grade RM engine while integrating their own signal logic if they wish.
2. Quick Action Guide (TL;DR)
Best Timeframe:
4 Hours (H4) and above. This is a high-conviction swing-trading system, not a scalper.
Best Assets:
Volatile instruments that still respect market structure:
Bitcoin, Ethereum, Gold (XAUUSD), high-volatility Forex pairs (e.g., GBPJPY), indices with clean ranges.
Strategy Type:
Volatility-Adaptive Trend Following + Impulse Detection.
It hunts for genuine expansion out of ranges, not tiny mean-reversion nibbles.
Key Feature:
Renko Emulation on time-based candles.
We mathematically model Renko Bricks and overlay them on your standard chart to define:
“Equilibrium” zones (inside the brick structure)
“Breakout / impulse” zones (when price AND the impulse line depart from the bricks)
Repainting:
Designed to be non-repainting on closed candles.
All RM execution logic uses confirmed historical data (no future bars, no security() lookahead). Intrabar flicker during formation is allowed, but once a bar closes the engine’s decisions are stable.
Core Toggles & Filters:
Enable Longs and Shorts independently
Optional Weekend filter (block trades on Saturday/Sunday)
Per-module toggles: Stop Loss, Trailing Stop, Staged Take Profits, AATS, RSIS
3. Detailed Report: How It Works
A. The Strategy Logic: Superior RBR
Superior RBR builds its entry signal from multiple mathematical layers working together.
1) Adaptive Lookback (Volatility Normalization)
Instead of a fixed 100-bar or 200-bar range, the script:
Computes ATR-based volatility over a user-defined period.
Normalizes that volatility relative to its recent min/max.
Maps the normalized value into a dynamic lookback window between a minimum and maximum (e.g., 4 to 100 bars).
High Volatility:
The lookback shrinks, so the system reacts faster to explosive moves.
Low Volatility:
The lookback expands, so the system sees a “bigger picture” and filters out chop.
All the core “Range High/Low” and “Range Close High/Low” boundaries are built on top of this adaptive window.
2) Range Construction & Quick Ranges
The engine constructs several nested ranges:
Outer Range:
rangeHighFinal – dynamic highest high
rangeLowFinal – dynamic lowest low
Inner Close Range:
rangeCloseHighFinal – highest close
rangeCloseLowFinal – lowest close
Quick Ranges:
“Half-length” variants of those, used to detect more responsive changes in structure and volatility.
These ranges define:
The macro box price is trading inside
Shorter-term “pressure zones” where price is coiling before expansion
3) Renko Emulation (The Bricks)
Rather than using the Renko chart type (which discards time), this script emulates Renko behavior on your normal candles:
A “brick size” is defined either:
As a standard percentage move, or
As a volatility-driven (ATR) brick, optionally inhibited by a minimum standard size
The engine tracks a base value and derives:
brickUpper – top of the emulated brick
brickLower – bottom of the emulated brick
When price moves sufficiently beyond those levels, the brick “shifts”, and the directional memory (renkoDir) updates:
renkoDir = +2 when bricks are advancing upward
renkoDir = -2 when bricks are stepping downward
You can think of this as a synthetic Renko tape overlaid on time-based candles:
Inside the brick: equilibrium / consolidation
Breaking away from the brick: momentum / expansion
4) Impulse Tracking with Laguerre Filters
The script uses multiple Laguerre Filters to smooth price and brick-derived data without traditional lag.
Key filters include:
LagF_1 / LagF_W: Based on brick upper/lower baselines
LagF_Q: Based on HLCC4 (high + low + 2×close)/4
LagF_Y / LagF_P: Complex averages combining brick structures and range averages
LagF_V (Primary Impulse Line):
A smooth, high-level impulse line derived from a blend of the above plus the outer ranges
Conceptually:
When the impulse line pushes away from the brick structure and continues in one direction, an impulse move is underway.
When its direction flips and begins to roll over, the impulse is fading, hinting at mean reversion back into the range.
5) Fib-Based Structure & Swaps
The system also layers in Fib levels derived from the adaptive ranges:
Standard levels (12%, 23.6%, 38.2%, 50%, 61%, 76.8%, 88%) from the main range
A secondary “swap” set derived from close-range dynamics (fib12Swap, fib23Swap, etc.)
These Fibs are used to:
Bucket price into structural zones (below 12, between 23–38, etc.)
Detect breakouts when price and Laguerre move beyond key Fib thresholds
Drive zSwap logic (where a secondary Fib set becomes the active structure once certain conditions are met)
6) Adaptive SuperTrend with K-Means-Style Volatility Clustering
Under the hood, the script uses a small k-means-style clustering routine on ATR:
ATR is measured over a fixed period
The range of ATR values is split into Low, Medium, High volatility centroids
Current ATR is assigned to the nearest centroid (cluster)
From that, a SuperTrend variant (STK) is computed with dynamic sensitivity:
In quiet markets, SuperTrend can afford to be tighter
In wild markets, it widens appropriately to avoid constant whipsaw
This SuperTrend-based oscillator (LagF_K and its signals) is then combined with the brick and Laguerre stack to confirm valid trend regimes.
7) Final Baseline Signals (+2 / -2)
The “brain” of Superior RBR lives in the Baseline & Signal Generation block:
Two composite signals are built: B1 and B2:
They combine:
Fib breakouts
Renko direction (renkoDir)
Expansion direction (expansionQuickDir)
Multiple Laguerre alignments (LagF_Q, LagF_W, LagF_Y, LagF_Z, LagF_P, LagF_V)
They also factor in whether Fib structures are expanding or contracting.
A user toggle selects the “Baseline” signal:
finalSig = B2 (default) or B1 (alternate baseline)
finalSig is then filtered through the RM state machine and only when everything aligns, we emit:
+2 = Long / Buy signal
-2 = Short / Sell signal
0 = No new trade
Those +2 / -2 values are what feed the Risk Management Engine.
B. The Risk Management (RM) Engine
This script features the Signal Lynx Risk Management Engine, a proprietary state machine built to separate Signal from Execution.
Instead of firing orders directly on indicator conditions, we:
Convert the raw signal into a clean integer (Fin = +2 / -2 / 0)
Feed it into a Trade State Machine that understands:
Are we flat?
Are we in a long or short?
Are we in a closing sequence?
Should we permit re-entry now or wait?
Logic Injection / Template Concept:
The RM engine expects a simple integer:
+2 → Buy
-2 → Sell
Everything else (0) is “no new trade”
This makes the script a template:
You can remove the Superior RBR block
Drop in your own logic (RSI, MACD, price action, etc.)
As long as you output +2 or -2 into the same signal channel, the RM engine can drive all exits and state transitions.
Aggressive vs Conservative Modes:
The input AgressiveRM (Aggressive RM) governs how we interpret signals:
Conservative Mode (Aggressive RM = false):
Uses a more filtered internal signal (AF) to open trades
Effectively waits for a clean trend flip / confirmation before new entries
Minimizes whipsaw at the cost of fewer trades
Aggressive Mode (Aggressive RM = true):
Reacts directly to the fresh alert (AO) pulses
Allows faster re-entries in the same direction after RM-based exits
Still respects your pyramiding setting; this script ships with pyramiding = 0 by default, so it will not stack multiple positions unless you change that parameter in the strategy() call.
The state machine enforces discipline on top of your signal logic, reducing double-fires and signal spam.
C. Advanced Exit Protocols (Layered Defense)
The exit side is where this template really shines. Instead of a single “take profit or stop loss,” it uses multiple, cooperating layers.
1) Hard Stop Loss
A classic percentage-based Stop Loss (SL) relative to the entry price.
Acts as a final “catastrophic protection” layer for unexpected moves.
2) Standard Trailing Stop
A percentage-based Trailing Stop (TS) that:
Activates only after price has moved a certain percentage in your favor (tsActivation)
Then trails price by a configurable percentage (ts)
This is a straightforward, battle-tested trailing mechanism.
3) Staged Take Profits (Three Levels)
The script supports three staged Take Profit levels (TP1, TP2, TP3):
Each stage has:
Activation percentage (how far price must move in your favor)
Trailing amount for that stage
Position percentage to close
Example setup:
TP1:
Activate at +10%
Trailing 5%
Close 10% of the position
TP2:
Activate at +20%
Trailing 10%
Close another 10%
TP3:
Activate at +30%
Trailing 5%
Close the remaining 80% (“runner”)
You can tailor these quantities for partial scaling out vs. letting a core position ride.
4) Advanced Adaptive Trailing Stop (AATS)
AATS is a sophisticated volatility- and structure-aware stop:
Uses Hirashima Sugita style levels (HSRS) to model “floors” and “ceilings” of price:
Dungeon → Lower floors → Mid → Upper floors → Penthouse
These levels classify where current price sits within a long-term distribution.
Combines HSRS with Bollinger-style envelopes and EMAs to determine:
Is price extended far into the upper structure?
Is it compressed near the lower ranges?
From this, it computes an adaptive factor that controls how tight or loose the trailing level (aATS / bATS) should be:
High Volatility / Penthouse areas:
Stop loosens to avoid getting wicked out by inevitable spikes.
Low Volatility / compressed structure:
Stop tightens to lock in and protect profit.
AATS is designed to be the “smart last line” that responds to context instead of a single fixed percentage.
5) RSI-Style Stop (RSIS)
On top of AATS, the script includes a RSI-like regime filter:
A McGinley Dynamic mean of price plus ATR bands creates a dynamic channel.
Crosses above the top band and below the lower band change a directional state.
When enabled (UseRSIS):
RSIS can confirm or veto AATS closes:
For longs: A shift to bearish RSIS can force exits sooner.
For shorts: A shift to bullish RSIS can do the same.
This extra layer helps avoid over-reactive stops in strong trends while still respecting a regime change when it happens.
D. Repainting Protection
Many strategies look incredible in the Strategy Tester but fail in live trading because they rely on intrabar values or future-knowledge functions.
This template is built with closed-candle realism in mind:
The Risk Management logic explicitly uses previous bar data (open , high , low , close ) for the key decisions on:
Trailing stop updates
TP triggers
SL hits
RM state transitions
No security() lookahead or future-bar access is used.
This means:
Backtest behavior is designed to match what you can actually get with PulseWire alerts and live automation.
Signals may “flicker” intrabar while the candle is forming (as with any strategy), but on closed candles, the RM decisions are stable and non-repainting.
4. For Developers & Modders
We strongly encourage you to mod this script.
To plug your own strategy into the RM engine:
Look for the section titled:
// BASELINE & SIGNAL GENERATION
You will see composite logic building B1 and B2, and then selecting:
baseSig = B2
altSig = B1
finalSig = sigSwap ? baseSig : altSig
You can replace the content used to generate baseSig / altSig with your own logic, for example:
RSI crosses
MACD histogram flips
Candle pattern detectors
External condition flags
Requirements are simple:
Your final logic must output:
2 → Buy signal
-2 → Sell signal
0 → No new trade
That output flows into the RM engine via finalSig → AlertOpen → state machine → Fin.
Once you wire your signals into finalSig, the entire Risk Management system (Stops, TPs, AATS, RSIS, re-entry logic, weekend filters, long/short toggles) becomes available for your custom strategy without re-inventing the wheel.
This makes Superior RBR not just a strategy, but a reference architecture for serious Pine dev work.
5. About Signal Lynx
Automation for the Night-Shift Nation 🌙
Signal Lynx focuses on helping traders and developers bridge the gap between indicator logic and real-world automation. The same RM engine you see here powers multiple internal systems and templates, including other public scripts like the Super-AO Strategy with Advanced Risk Management.
We provide this code open source under the Mozilla Public License 2.0 (MPL-2.0) to:
Demonstrate how Adaptive Logic and structured Risk Management can outperform static, one-layer indicators
Give Pine Script users a battle-tested RM backbone they can reuse, remix, and extend
If you are looking to automate your PulseWire strategies, route signals to exchanges, or simply want safer, smarter strategy structures, please keep Signal Lynx in your search.
License: Mozilla Public License 2.0 (Open Source).
If you make beneficial modifications, please consider releasing them back to the community so everyone can benefit. Strategy
Renko Open Range delta
Delta Renko-Style Indicator Guide (NQ Focus)
This indicator takes inspiration from the Renko Chart concept and is optimized for the RTH session (New York time zone), specifically applied to the Nasdaq futures (NQ) product.
If you’re unfamiliar with Renko charts, it may help to review their basics first, as this indicator borrows their clean, block-based perspective to simplify price interpretation.
⸻
🔧 How the Indicator Works
• At market open (9:30 AM EST), the indicator plots a horizontal open price line, referred to as 0 delta.
• From this anchor, it plots 10 incremental levels (deltas) both above and below the open, each spaced by 62.5 NQ points.
Why 62.5?
• With NQ currently trading in the 23,000–24,000 range, a 62.5-point move represents roughly 0.26% of the daily average range.
• This makes each delta step significant enough to capture movement while filtering out smaller noise.
A mini table (location adjustable) displays:
• Current delta zone
• Last touched delta level
This gives you a quick snapshot of where price sits relative to the open.
⸻
📈 How to Read the Market
• At the open, price typically oscillates between 0 and +1 / -1 delta.
• A break beyond this zone often signals stronger directional intent:
• Trending day: price can push into +2, +3, +4, +5 (or the inverse for downside).
• Range day: expect price to bounce between +1, 0, -1 deltas.
⚠️ Note: This is a visualization tool, not a trading system. Its purpose is to help you quickly recognize range vs. trend conditions.
⸻
📊 Example
• In this case, NQ reached +1 delta shortly after open.
• A retest of 0 delta followed, and price later surged to +5/+6 deltas (helped by Fed news).
⸻
🛠️ Practical Uses
This indicator can help you:
• Define profit targets
• Place hard stop levels
• Gauge whether a counter-trend trade is worth the risk
⚠️ Caution: Avoid counter-trend trades if price is aggressively pushing toward +5/+6 or -5/-6 deltas, as trend exhaustion usually hasn’t set in yet.
⸻
🔄 Adapting for ES (S&P Futures)
• On NQ, 62.5 points ≈ $1,250 per contract.
• For ES, this translates to 25 points.
• Since 1 NQ contract ≈ 2 ES contracts in dollar terms, an optimized ES delta step would be 12.5 points.
You may also experiment with different delta values (e.g., 50 or 31.25 for NQ) to align with your risk profile and trading style.
⸻
🧪 Extending Beyond NQ
You can experiment with applying this indicator to ES or even stocks, but non-futures assets may require additional calibration and testing.
⸻
✅ Bottom line: This tool provides a clean, Renko-inspired framework for quickly gauging trend vs. range conditions, setting realistic profit targets, and avoiding poor counter-trend setups.
Indicator
Universal Renko Bars by SiddWolfUniversal Renko Bars or UniRenko Bars is an overlay indicator that applies the logic of Renko charting directly onto a standard candlestick chart. It generates a sequence of price-driven bricks, where each new brick is formed only when the price moves a specific amount, regardless of time. This provides a clean, price-action-focused visualization of the market's trend.
WHAT IS UNIVERSAL RENKO BARS?
For years, traders have faced a stark choice: the clean, noise-free world of Renko charts, or the rich, time-based context of Candlesticks. Choosing Renko meant giving up your favorite moving averages, volume profiles, and the fundamental sense of time. Choosing Candlesticks meant enduring the market noise that often clouds true price action.
But what if you didn't have to choose?
Universal Renko Bars is a revolutionary indicator that ends this dilemma. It's not just another charting tool; it's a powerful synthesis that overlays the pure, price-driven logic of Renko bricks directly onto your standard candlestick chart. This hybrid approach gives you the best of both worlds:
❖ The Clarity of Renko: By filtering out the insignificant noise of time, Universal Renko reveals the underlying trend with unparalleled clarity. Up trends are clean successions of green bricks; down trends are clear red bricks. No more guesswork.
❖ The Context of Candlesticks: Because the Renko logic is an overlay, you retain your time axis, your volume data, and full compatibility with every other time-based indicator in your arsenal (RSI, MACD, Moving Averages, etc.).
The true magic, however, lies in its live, Unconfirmed Renko brick. This semi-transparent box is your window into the current bar's real-time struggle. It grows, shrinks, and changes color with every tick, showing you exactly how close the price is to confirming the trend or forcing a reversal. It’s no longer a lagging indicator; it’s a live look at the current battle between buyers and sellers.
Universal Renko Bars unifies these two powerful charting methods, transforming your chart into a more intelligent, noise-free, and predictive analytical canvas.
HOW TO USE
To get the most out of Universal Renko Bars, here are a few tips and a full breakdown of the settings.
Initial Setup for the Best Experience
For the cleanest possible view, it's highly recommended that you hide the body of your standard candlesticks, that shows only the skelton of the candle. This allows the Renko bricks to become the primary focus of your chart.
→ Double click on the candles and uncheck the body checkbox.
Settings Breakdown
The indicator is designed to be powerful yet intuitive. The settings are grouped to make customization easy.
First, What is a "Tick"?
Before we dive in, it's important to understand the concept of a "Tick." In Universal Renko, a Tick is not the same as a market tick. It's a fundamental unit of price movement that you define. For example, if you set the Tick Size to $0.50, then a price move of $1.00 is equal to 2 Ticks. This is the core building block for all Renko bricks. Tick size here is dynamically determined by the settings provided in the indicator.
❖ Calculation Method (The "Tick Size" Engine)
This section determines the monetary value of a single "Tick."
`Calculation Method` : Choose your preferred engine for defining the Tick Size.
`ATR Based` (Default): The Tick Size becomes dynamic, based on market volatility (Average True Range). Bricks will get larger in volatile markets and smaller in quiet ones. Use the `ATR 14 Multiplier` to control the sensitivity.
`Percentage` : The Tick Size is a simple percentage of the current asset price, controlled by the `Percent Size (%)` input.
`Auto` : The "set it and forget it" mode. The script intelligently calculates a Tick Size based on the asset's price. Use the `Auto Sensitivity` slider to make these automatically calculated bricks thicker (value > 1.0) or thinner (value < 1.0).
❖ Parameters (The Core Renko Engine)
This group controls how the bricks are constructed based on the Tick Size.
`Tick Trend` : The number of "Ticks" the price must move in the same direction to print a new continuation brick. A smaller value means bricks form more easily.
`Tick Reversal` : The number of "Ticks" the price must move in the opposite direction to print a new reversal brick. This is typically set higher than `Tick Trend` (e.g., double) to filter out minor pullbacks and market noise.
`Open Offset` : Controls the visual overlap of the bricks. A value of `0` creates gapless bricks that start where the last one ended. A value of `2` (with a `Tick Reversal` of 4) creates the classic 50% overlap look.
❖ Visuals (Controlling What You See)
This is where you tailor the chart to your visual preference.
`Show Confirmed Renko` : Toggles the solid-colored, historical bricks. These are finalized and will never change. They represent the confirmed past trend.
`Show Unconfirmed Renko` : This is the most powerful visual feature. It toggles the live, semi-transparent box that represents the developing brick. It shows you exactly where the price is right now in relation to the levels needed to form the next brick.
`Show Max/Min Levels` : Toggles the horizontal "finish lines" on your chart. The green line is the price target for a bullish brick, and the red line is the target for a bearish brick. These are excellent for spotting breakouts.
`Show Info Label` : Toggles the on-chart label that provides key real-time stats:
🧱 Bricks: The total count of confirmed bricks.
⏳ Live: How many chart bars the current live brick has been forming. These bars forms the Renko bricks that aren't confirmed yet. Live = 0 means the latest renko brick is confirmed.
🌲 Tick Size: The current calculated value of a single Tick.
Hover over the label for a tooltip with live RSI(14), MFI(14), and CCI(20) data for additional confirmation.
TRADING STRATEGIES & IDEAS
Universal Renko Bars isn't just a visual tool; it's a foundation for building robust trading strategies.
Trend Confirmation: The primary use is to instantly identify the trend. A series of green bricks indicates a strong uptrend; a series of red bricks indicates a strong downtrend. Use this to filter out trades that go against the primary momentum.
Reversal Spotting: Pay close attention to the Unconfirmed Brick . When a strong trend is in place and the live brick starts to fight against it—changing color and growing larger—it can be an early warning that a reversal is imminent. Wait for the brick to be confirmed for a higher probability entry.
Breakout Trading: The `Max/Min Levels` are your dynamic breakout zones. A long entry can be considered when the price breaks and closes above the green Max Level, confirming a new bullish brick. A short entry can be taken when price breaks below the red Min Level.
Confluence & Indicator Synergy: This is where Universal Renko truly shines. Overlay a moving average (e.g., 20 EMA). Only take long trades when the green bricks are forming above the EMA. Combine it with RSI or MACD; a bearish reversal brick forming while the RSI shows bearish divergence is a very powerful signal.
A FINAL WORD
Universal Renko Bars was designed to solve a fundamental problem in technical analysis. It brings together the best elements of two powerful methodologies to give you a clearer, more actionable view of the market. By filtering noise while retaining context, it empowers you to make decisions with greater confidence.
Add Universal Renko Bars to your chart today and elevate your analysis. We welcome your feedback and suggestions for future updates!
Follow me to get notified when I publish New Indicator.
~ SiddWolf
Indicator
Indicator
MestreDoFOMO Renko Underground v4.0Description:
The "MestreDoFOMO Renko Underground v4.0" is a custom indicator for PulseWire that creates a dynamic Renko chart to help identify trends and reversal points in the market. Unlike traditional candlestick charts, Renko focuses solely on significant price movements, ignoring time and market noise. This script includes advanced features like support and resistance channels, moving averages, and alerts to assist with your trading decisions.
How It Works:
Dynamic Renko Bricks:
The brick size (price units to form each "box" on the chart) is calculated automatically using the ATR (Average True Range) with an adjustable multiplier. This means the size adapts to the asset's volatility (e.g., BTC/USDT). When the price moves up or down by the brick size, a new brick is created (green for up, red for down).
Reversal Signals:
Green triangles (🔼) appear below bars when the trend shifts to bullish, and red triangles (🔽) appear above when it shifts to bearish. These signals only appear on direction changes, reducing false signals.
Renko Channel:
The script draws two lines (green for resistance and red for support) based on the highs and lows of the last 10 bricks (or the value you set). This helps identify key price zones.
Moving Average on Bricks:
An orange line shows the moving average (EMA or SMA, your choice) of the last 20 bricks, helping confirm the overall trend.
Alerts:
You can set up alerts in PulseWire to be notified when the trend shifts to bullish or bearish, perfect for active trading.
Visualization:
A gray dashed line shows the level of the last brick, providing a clear reference for the next expected move.
How to Use:
Add the indicator to your chart (e.g., BTC/USDT 1D).
Adjust parameters like the ATR multiplier, channel length, and moving average type in the settings menu.
Watch the bricks and signals to identify trends, and use the channels and moving average to plan entries and exits.
Enable alerts to receive real-time notifications.
Tip:
Test on different timeframes (1H, 4H, 1D) and adjust the ATR multiplier to match the volatility of the asset you're trading. Combine with other indicators (like RSI) for better results! Indicator
Non-Repainting Renko Emulation Strategy [PineIndicators]Introduction: The Repainting Problem in Renko Strategies
Renko charts are widely used in technical analysis for their ability to filter out market noise and emphasize price trends. Unlike traditional candlestick charts, which are based on fixed time intervals, Renko charts construct bricks only when price moves by a predefined amount. This makes them useful for trend identification while reducing small fluctuations.
However, Renko-based trading strategies often fail in live trading due to a fundamental issue: repainting .
Why Do Renko Strategies Repaint?
Most trading platforms, including PulseWire, generate Renko charts retrospectively based on historical price data. This leads to the following issues:
Renko bricks can change or disappear when new data arrives.
Backtesting results do not reflect real market conditions. Strategies may appear highly profitable in backtests because historical data is recalculated with hindsight.
Live trading produces different results than backtesting. Traders cannot know in advance whether a new Renko brick will form until price moves far enough.
Objective of the Renko Emulator
This script simulates Renko behavior on a standard time-based chart without repainting. Instead of using PulseWire’s built-in Renko charting, which recalculates past bricks, this approach ensures that once a Renko brick is formed, it remains unchanged .
Key benefits:
No past bricks are recalculated or removed.
Trading strategies can execute reliably without false signals.
Renko-based logic can be applied on a time-based chart.
How the Renko Emulator Works
1. Parameter Configuration & Initialization
The script defines key user inputs and variables:
brickSize : Defines the Renko brick size in price points, adjustable by the user.
renkoPrice : Stores the closing price of the last completed Renko brick.
prevRenkoPrice : Stores the price level of the previous Renko brick.
brickDir : Tracks the direction of Renko bricks (1 = up, -1 = down).
newBrick : A boolean flag that indicates whether a new Renko brick has been formed.
brickStart : Stores the bar index at which the current Renko brick started.
2. Identifying Renko Brick Formation Without Repainting
To ensure that the strategy does not repaint, Renko calculations are performed only on confirmed bars.
The script calculates the difference between the current price and the last Renko brick level.
If the absolute price difference meets or exceeds the brick size, a new Renko brick is formed.
The new Renko price level is updated based on the number of bricks that would fit within the price movement.
The direction (brickDir) is updated , and a flag ( newBrick ) is set to indicate that a new brick has been formed.
3. Visualizing Renko Bricks on a Time-Based Chart
Since PulseWire does not support live Renko charts without repainting, the script uses graphical elements to draw Renko-style bricks on a standard chart.
Each time a new Renko brick forms, a colored rectangle (box) is drawn:
Green boxes → Represent bullish Renko bricks.
Red boxes → Represent bearish Renko bricks.
This allows traders to see Renko-like formations on a time-based chart, while ensuring that past bricks do not change.
Trading Strategy Implementation
Since the Renko emulator provides a stable price structure, it is possible to apply a consistent trading strategy that would otherwise fail on a traditional Renko chart.
1. Entry Conditions
A long trade is entered when:
The previous Renko brick was bearish .
The new Renko brick confirms an upward trend .
There is no existing long position .
A short trade is entered when:
The previous Renko brick was bullish .
The new Renko brick confirms a downward trend .
There is no existing short position .
2. Exit Conditions
Trades are closed when a trend reversal is detected:
Long trades are closed when a new bearish brick forms.
Short trades are closed when a new bullish brick forms.
Key Characteristics of This Approach
1. No Historical Recalculation
Once a Renko brick forms, it remains fixed and does not change.
Past price action does not shift based on future data.
2. Trading Strategies Operate Consistently
Since the Renko structure is stable, strategies can execute without unexpected changes in signals.
Live trading results align more closely with backtesting performance.
3. Allows Renko Analysis Without Switching Chart Types
Traders can apply Renko logic without leaving a standard time-based chart.
This enables integration with indicators that normally cannot be used on traditional Renko charts.
Considerations When Using This Strategy
Trade execution may be delayed compared to standard Renko charts. Since new bricks are only confirmed on closed bars, entries may occur slightly later.
Brick size selection is important. A smaller brickSize results in more frequent trades, while a larger brickSize reduces signals.
Conclusion
This Renko Emulation Strategy provides a method for using Renko-based trading strategies on a time-based chart without repainting. By ensuring that bricks do not change once formed, it allows traders to use stable Renko logic while avoiding the issues associated with traditional Renko charts.
This approach enables accurate backtesting and reliable live execution, making it suitable for trend-following and swing trading strategies that rely on Renko price action. Strategy
