Indicator
Previous Day Levels & Stats - High and Low, Wicks, Gaps👀OVERVIEW
Previous Day Levels & Stats (PDH/PDL) draws yesterday's open, high, low and close on today's chart and pairs them with a statistics table showing how this symbol has historically behaved at those levels and split both by whether yesterday closed red or green, and by where today opened.
Most previous-day indicators tell you where yesterday's high and low sit. This one also tells you what price has historically done at those levels including:
⚪ How often the previous day level broke
⚪ How often a break held
⚪ How often price traded into yesterday's wick zone and got rejected
⚪ How far a real break typically ran which is then calculated in today's dollars and added to the chart as an option.
Stats tables like this exist already, but this one splits every statistic two ways at once. First by whether yesterday closed red or green, and then by where today opened. A three-way open classification decides which numbers apply to today.
⚡ CONCEPT
Previous Day. The previous day is the most recently completed regular trading session. At the 4:00 pm close, the levels, candle, projection, and table all flip to the day that just finished and these new levels hold through post-market and the next morning's pre-market. This allows you to prepare for the next day ahead of time.
Conditioning on yesterday's color. The data for red days and green days are kept in two separate sets. The table header tells you which condition applies right now ("AFTER A RED DAY" / "AFTER A GREEN DAY"), and you only ever see the set that matters today.
Conditioning on today's open. Each day is classified three ways against yesterday's range: ⚪Opened inside the range
⚪Gapped above the previous day's high
⚪Gapped below the previous day's low
These are all different situations, a PDH break on an inside day and a gap that opened above PDH are not the same event, so they get separate data and are shown in separate rows.
When trading opens on each new day, the table reduces to only show the section that applies for today. The full table returns at the close so you can study both possibilities while preparing for the next day. If you prefer to always see both sections, a setting turns this off and the non-applicable section dims instead.
Inside-day rows. For days that opened inside yesterday's range.
🔴A: Wick rejected: The day opened inside yesterday's range and traded up into yesterday's upper wick, reaching at least the top of yesterday's body. It never touched yesterday's high, and it ultimately closed back below the top of the body (below the wick). If the day so much as touched yesterday's high, it counts in the break rows instead of in wick rejected row. The percentage is out of all days that opened inside yesterday's range after the same color day. This is showing when we open inside the previous day how often price traded both up into the wick and then got rejected. The PDL column is the mirror image using the lower wick and yesterday's low.
🔵B: Broke but failed: The day opened inside yesterday's range and traded up to or above yesterday's high then ultimately closed at or under yesterday's high. This includes closes just under the high, inside the wick, inside the body and through to the other side of the previous day. This is showing when we open inside the previous day how often price traded both up above the previous day and then got rejected. The PDL column is the mirror image using yesterday's low.
🟡C: Broke & held: The day opened inside yesterday's range and traded up to and above yesterday's high then ended up closing the day above it. This does not track anything that happens in between the break and the close, simply the final outcome. The PDL column is the mirror image using the low of yesterday.
🟢D: Typical run past level: On inside opening days where a break beyond PDH or PDL held, the indicator measures how far price historically ran beyond the level. A run measured in dollars from years ago is not comparable to one from last week. So each historical run is first measured against what a normal daily range was at that time, the median value of all those runs is taken, and that value is converted back to dollars using what a normal daily range is now. The result reads like this: when a break like this held, price typically ran about this far past the level. The median average is used instead of mean average so a single giant day cannot distort the number. In addition to the median distance of the run, a second, farther distance is also available: about 1 in 4 of those runs went beyond this level. This does not include days that closed back inside, these are all from days that broke and held. This also is the furthest distance of the day, not how far the final close of the day was.
Each row is a separate outcome from the same set of days. A day lands in at most one of the three rows per column. The rows do not add up to 100 because some inside days never reach some of the levels at all. The only row that is connected is the Typical run past level row which is based on days that broke and closed past the high or low.
Gap-day rows. For days that opened either above PDH or below PDL.
🔴A: Gap Fill: Opened beyond either PDH or PDL and price came back to at least touch the respective PDH or PDL during the day. This is specifically for the high or low of the previous day, not the previous days close. A day can fill the gap to the level and still close back beyond it, so this row overlaps the rows below it.
🔵B: Wick rejected: Opened beyond either PDH or PDL, traded back into only the wick of the previous day (did not trade back into the body of the candle) and then closed back beyond respective high or low. This is showing when we opened above or below previous day, how often we both traded into the respective high or low wick and back out beyond it. If price at any time during the day traded into the body of the previous candle, it no longer counts in this row.
🟡C: Body rejected: Opened beyond either PDH or PDL, traded back into the body of the previous day candle and then closed the day all the way back beyond respective high or low.
🟢D: Closed back inside: Opened beyond either PDH or PDL and by the end of the day closed back inside the previous day range (wick or body).
🟠E: Closed through: Opened beyond PDH or PDL and ultimately closed the day on the opposite side of the previous day candle than where it opened.
🟣F: Gap held: Opened above PDH and closed the day still above PDH, or opened below PDL and closed the day still below PDL, regardless of what happened in between. This row includes days that never pulled back and days that pulled back and recovered. So price could have never even touched the previous days candle, traded clear through to the other side and back again or anything in between, but closed the day on the same side as the open gap.
Wick rejected and Body rejected are subsets of Gap held. Gap held, Closed back inside, Closed through partition all gap days and sum to 100%.
⭐Doji days. If yesterday closed exactly where it opened, it has no color, so no condition applies. The indicator carries the most recent non-doji color forward for the table, and the header reads "AFTER A DOJI DAY*" on a neutral background so you know a substitution happened. Days that follow a doji are not counted into either condition's statistics, they're displayed under the carried color, never counted under it. So the previous day open, high, low and close are based on the actual previous day (the doji), but the stats are filtered through the most recent colored day before it. There are not enough doji days to have a realistic amount of data to work from. So the levels are used but the data is from the color of the bar before the doji day.
💥FEATURES
• The statistics table: conditioned as described above, with preset color themes (including one designed for light charts). Cell color intensity shows decisiveness, not direction. The further a percentage sits from a coin flip (50/50) in either direction, the stronger the cell glows. Sample sizes appear in hover tooltips on every row.
• Previous-day OHLC lines: with span, style, width, and label options.
• Previous-day candle: a large rendering of yesterday's candle beside today's action, with different placement options.
• Projection overlay: yesterday's candle projected across today's session, so you watch today on top of yesterday's shape.
• Typical-run levels: optional lines shown on the chart from inside days only.
❓HOW TO USE
1. Open an intraday chart of a stock before the market opens. The levels and/or projection already show the most recently completed day and the table shows the data based on what color the previous day was for both if today opens inside previous day and if today opens with a gap in either direction.
2. At 9:30 AM ET, the table will classify the day and the section matching today's open highlights. That shows context, what this symbol has historically done from this starting situation in the past.
3. Use the OHLC lines and wick zones as the map, and the table as the stats at each level. Hover any row for its exact definition and sample size.
4. On inside-open days, turn on the typical-run levels if you want the median-run distances drawn on the chart.
The table describes what this symbol has done, not what it will do. Treat every number as context, not a prediction.
❗ LIMITATIONS
• Session logic is built around US stocks (9:30–4:00 ET regular session). The indicator loads on other symbols, but the open classification, the flip at the close, and the projection presets assume US stock sessions; on 24-hour markets without distinct pre/post sessions the close-flip does not engage.
• Statistics are historical frequencies on your symbol's data. They are not predictions, carry no performance implication, and small samples (newer tickers, rare conditions) mean wider uncertainty so check the sample sizes in the tooltips.
• Days following a doji are excluded from both condition samples (see Concepts), so condition totals will be slightly smaller than the symbol's full day count.
• Absence of typical-run lines on a gap open is intentional, the typical run lines are based on a break out of the prior day. In an attempt to keep the indicator simple and user friendly, the lines are only applied for break outs of the range.
• During post-market, the projection covers the just-completed session behind price; the pre-market view is the designed preparation window.
• Different data feeds disagree by cents on some historical days, so counts can differ slightly between feeds.
• This indicator is for educational purposes and is not intended to be used alone for decision making. Make sure that you properly backtest with any data before using it.
📋NOTES
All statistics are computed from the symbol's complete daily history, so the numbers are the same on every chart timeframe and don't depend on how many bars your chart happens to have loaded. Everything is computed on confirmed bars only and states move forward-only so nothing is retroactively relabeled, and what you see live is what remains on the chart in history and in replay.
Indicator
Wick Asymmetry Ratio (WAR)Wick Asymmetry Ratio (WAR)
WAR is a bounded oscillator (−1 to +1) that measures which candle wick dominates — in other words, where price was rejected .
How it's calculated
upper = high − max(open, close)
lower = min(open, close) − low
WAR = (lower − upper) / (high − low + ε)
Most wick tools compare each wick against the body. WAR instead subtracts the two wicks and normalizes by the full bar range. Two consequences: it never breaks on doji candles (zero body, no division blow-up), and it produces a single symmetric value comparable across symbols and timeframes.
How to read it
WAR > 0 → lower wick dominates → buyers defended the low (bullish rejection)
WAR < 0 → upper wick dominates → sellers capped the high (bearish rejection)
WAR ≈ 0 → clean body or symmetric wicks → no clear rejection
The signal filter — this is the point
A single strong wick means little in the middle of a range. WAR only marks a signal when a strong rejection coincides with the bar being the highest/lowest of the lookback window, plus a cooldown to prevent clusters. This is what separates it from "an arrow on every wick".
Visual layers
Colored histogram (sign + strength)
Optional price-overlay pressure ribbon that shifts green↔red — read pressure without numbers
Signal dots with a halo at filtered extremes
Subtle background aura in strong zones
Limitations — read this
WAR is a context / exhaustion tool, not a standalone entry trigger. It tells you who absorbed price on a given bar; it does not predict direction by itself. Use it as confluence with structure, support/resistance, or your own system. On sub-cent assets raise ε. The signal fires on bar close at the threshold cross.
Open-source. Wick analysis is a well-known concept; what's specific here is the subtractive, range-normalized oscillator plus the extreme + cooldown filter and the price-overlay ribbon. Feedback and forks welcome.
— Español —
WAR es un oscilador acotado (−1 a +1) que mide qué mecha de la vela domina, es decir, dónde fue rechazado el precio . A diferencia de los ratios mecha/cuerpo, WAR resta ambas mechas y normaliza por el rango total: no se rompe en doji y da un valor simétrico comparable entre activos y temporalidades.
WAR > 0 → mecha inferior domina → rechazo comprador
WAR < 0 → mecha superior domina → rechazo vendedor
WAR ≈ 0 → cuerpo limpio o mechas simétricas → sin rechazo claro
El filtro solo marca señal cuando un rechazo fuerte coincide con un extremo de la ventana, con cooldown para evitar racimos. Es una herramienta de contexto / agotamiento , no un gatillo de entrada por sí sola — úsala como confluencia. Toda la interfaz en inglés está traducida en esta descripción. Indicator
Rejection Block Matrix [ZOM]Rejection Block Matrix maps supply and demand rejection blocks from failed swing sweeps and confirmed pivot wick rejection.
What it shows:
- Demand and supply blocks built from wick/body rejection structure
- Failed high/low sweep blocks for tape-reading style reversal context
- Tested and broken block state tracking, with broken context hidden by default to reduce clutter
- Reclaim/rejection marks when price retests a live block
- A compact dashboard showing visible demand/supply blocks, tested count, latest source, bias, and quality
How I use it:
The blocks are structure zones, not automatic entries. I use them to see where price rejected prior liquidity, then watch how later candles behave when they revisit those blocks. It is especially useful on liquid intraday markets such as ES, NQ, crypto, and major FX pairs.
Open-source script. Educational tool only; not financial advice. Indicator
Iceberg Detector [JOAT]ICEBERG DETECTOR
A hidden-liquidity detector that infers iceberg orders from their footprint on the tape — without needing direct L2 data. The detection pattern is well-known to professional tape readers: the same price level being repeatedly tested by long wicks, with above-average volume, and price each time getting rejected back in the opposite direction. That repeated-rejection pattern is the visible signature of an iceberg — a large resting order broken into smaller slices to hide its true size. This script catches the pattern, clusters the tests, paints the zone, and tells you when the iceberg gets broken or eaten.
Detection — five gates, all required
A bar is a candidate iceberg test only when every one of these is true:
Long wick — wick-to-body ratio above the configurable threshold (default 0.75). The wick is the visible rejection; the body is the failed push.
Local extremum — the wick reached a local high or low over the configurable pivot lookback (default 5 bars). A wick that did not actually probe new territory does not count.
Above-average volume — bar volume must exceed volume average × multiplier (default 1.0×). Real absorption needs real size hitting the tape.
Wick rejection bias — the candle must close in the rejection direction (opposite of the wick).
Cluster within tolerance — at least N (default 2) of these qualifying tests must occur within ATR × tolerance of the same level inside the detection window (default 40 bars).
Only when all five gates pass does the script paint a zone. The wick rejection bias % input controls how strict the rejection-direction filter is; raising it to 70%+ makes the zone confirmation slower but cleaner.
Cluster-aware level building
When two or more qualifying tests fall within ATR-multiplier tolerance of each other, they are clustered into a single zone whose vertical extent (configurable in ATR units) covers the cluster. This means an iceberg sitting at 4382.50–4383.25 is rendered as a single horizontal band, not two separate ticks — which is how a real iceberg would actually appear on the tape.
Visual system
Iceberg zone — a horizontal band rendered in the cool-blue palette (deep void → pale violet gradient) with configurable opacity.
Glow layers — N (configurable, default 4) stacked transparent boxes behind the zone produce a soft glow border.
Pulse animation — for a configurable number of bars after a fresh test, the zone's transparency oscillates to highlight that the iceberg has just been re-tested. Toggleable.
Test ticks — small markers at each individual test bar inside the zone.
Test count badge — small number tag showing how many tests have hit the level.
Right extension — configurable bar count for forward zone projection.
A locked Void palette (cool violet gradient on a deep void ground) gives the chart a distinctive hidden-liquidity identity.
Lifecycle — persist, archive, break
Every iceberg has three life stages:
Active — currently in front of price and being honoured. New tests add ticks and trigger pulse animations.
Broken — price closed through the level by Break Distance × ATR (default 0.5 ATR). The zone moves to the muted broken-archive palette and stays on the chart for brokenStaleBars (default 150) bars so you can see where structure failed.
Stale — older than the archive lifetime, automatically removed.
A maximum-concurrent-icebergs cap (default 12 active) and a max-broken cap (default 8) keep the chart legible.
Dashboard
Monospaced table, positionable to any of nine corners, surfaces:
Active iceberg count, broken count.
Nearest iceberg level with side (resistance / support), distance in ticks or %.
Test count and age of the nearest iceberg.
Last broken event with bars-ago tag.
Alerts
Three alert conditions, each independently controllable:
New Iceberg Detected — fires the bar an iceberg is first confirmed (all five gates pass).
Iceberg Re-Tested — fires when an existing iceberg gets another qualifying test.
Iceberg Broken — fires when price closes through by the break-distance threshold.
How to read it
Two reads, in order of conviction:
Active iceberg in front of price is your immediate liquidity wall. Faded iceberg the market keeps probing without breaking = strong demand-side or supply-side hidden order. Use as a context level — fade touches if your bias is reversal, expect continuation through if your bias is breakout.
Iceberg Broken alert is your highest-conviction directional event. A hidden order has been eaten through, meaning the side that was holding it has either pulled it or been exhausted — either way, the resistance / support is gone, and the move that follows is unencumbered by the absorbed liquidity.
Suggested settings
Defaults (2 minimum tests, 40-bar detection window, 0.5 ATR cluster tolerance, 0.75 wick/body ratio) are tuned for 5m–1H on liquid markets. For lower-timeframe scalping, lower the wick/body ratio to 0.5 and raise the volume multiplier to 1.5×. For higher-timeframe macro reads, raise minimum tests to 3 and widen the detection window to 100+ bars.
Originality
The implementation — the five-gate detection (wick + extremum + volume + rejection % + cluster tolerance), the ATR-cluster level-builder, the cool-palette glow layers, the post-test pulse animation, the break-distance lifecycle with archive, and the test-count badge rendering — is JOAT-original and tuned together. No third-party code reused. The hidden-liquidity / iceberg concept is well-known to tape readers; the detection pipeline here is built specifically for chart-based bar data without requiring L2 access.
Limitations
Pine indicators cannot read L2 order book data. Iceberg Detector infers iceberg presence from the visible tape footprint — long-wick rejection candles, clustered at a level, with above-average volume, all closing in the rejection direction. This is the accepted public-market inference pattern but it is by nature an inference, not a direct observation. The script can produce false positives on instruments with naturally wicky candles and false negatives on instruments where icebergs are filled too quickly to show as multi-bar tests. On low-volume instruments the volume gate may need to be raised to compensate.
—
Open source- The five-gate detection pipeline, the ATR-cluster level-builder, the post-test pulse compositor, and the lifecycle-with-archive state machine are proprietary. Free to use; behaviour is fully described above.
—
-made with passion by jackofalltrades
Indicator
Iridescent Helix [JOAT]Iridescent Helix
Iridescent Helix is a composite momentum oscillator that lives in a sub-pane and projects cross-pane visuals onto the price chart. The composite blends three orthogonal momentum legs into a single normalized score in the range -100 to +100. Above the math, it adds a layered iridescent ribbon, a breath-opacity histogram, gradient overbought / oversold zones, cross-pane iridescent candle recoloring, and an in-pane pivot divergence engine.
What makes it different
The composite blends three independent momentum lenses: a volume-weighted-median price distance, a Connors-style triple RSI, and a clamped volume Z-score. Smoothed with a Hull Moving Average to reduce phase lag while preserving sensitivity.
The visual stack uses seven plot layers per direction, hue-rotated through the bull or bear accent gradient, each layer at a different transparency and linewidth, producing a depth effect that single-color ribbons cannot match.
A breath-opacity histogram fades columns when momentum is decelerating and brightens them when momentum is accelerating, giving an at-a-glance read of momentum derivative.
An in-pane pivot divergence engine detects regular and hidden divergences and projects both as in-pane markers and as price-to-price connector lines on the price chart.
How it works
Volume-weighted median over a rolling window. Sort close prices ascending, accumulate volumes in that order. The price at which cumulative volume crosses half of total volume is the weighted median.
Composite equals 0.50 times the normalized distance from the volume-weighted median, plus 0.35 times the normalized Connors RSI, plus 0.15 times the clamped volume Z.
Hull-smoothed and scaled to centi-percent, clamped to the range -100 to +100. EMA(21) signal line drawn alongside.
Pivot divergence detection compares price pivots against composite pivots, gated to a 5-to-60-bar window between successive pivots.
Right-edge labels in the pane (composite, signal, volume Z) and on the price chart (cross-pane regime status).
Reading the chart
In-pane : seven-layer iridescent ribbon, breath-opacity histogram, volume-modulated zero line, overbought / oversold guide lines with gradient fills when the composite breaches them, composite-to-signal ribbon fill.
Cross-pane : iridescent candle recolor on price, divergence connector lines between price pivots, subtle reversal dots at extreme reversal closes, soft regime tint background when the composite is clearly above or below zero.
Right-edge label cluster : the pane shows current composite (with percentile rank), signal line, and volume Z. The price chart shows a single IRH summary label with composite value, percentile, and regime tag.
A right-edge state block lists current regime, zone (overbought, oversold, neutral), and bars since the last zero cross.
Signals
Bull / bear zero cross (composite re-crosses zero)
Overbought / oversold reversal (composite crosses back from an extreme)
Volume surge (volume Z above two)
Momentum acceleration / deceleration above a user-tunable threshold
Regular and hidden divergence detection (bull / bear pairs)
All gated on barstate.isconfirmed or barstate.ishistory. No future references. No lookahead_on.
Inputs
Composite : VW median length, volume Z length, overbought / oversold levels, divergence lookback, percentile envelope length.
Visual : bullish / bearish / accent / magenta colors, toggles for ribbon, histogram, iridescent candles, cross-pane reversal dots, divergence dots, percentile envelope, cross-pane regime tint.
Labels : pane right-edge cluster, pane state block, cross-pane IRH label, divergence lines, divergence labels, OB/OS event labels, zero-cross events, acceleration events.
Dashboard : position, size.
Alerts : acceleration magnitude threshold.
How traders use this
Trend continuation : open positions in the direction of the composite when it crosses zero from the appropriate side and the volume Z confirms.
Reversion plays : take fades when the composite reaches an extreme zone and momentum begins decelerating (histogram fades), particularly when supported by a regular divergence connector on the price chart.
Hidden divergence : in a clear trend, a hidden divergence is a continuation signal and can be used to add to existing positions on a pullback.
Cross-system confirmation : feed the composite into other JOAT scripts (for example Position Architect) as a signal source by connecting plots in the chart UI.
Limitations
The composite is a normalized smoothed reading, not a leading indicator. It quantifies present momentum strength and direction rather than predicting future direction.
Connors RSI and volume Z need warm-up bars before they stabilize.
Pivot divergence detection inherits the right-bar delay of pivot identification (the pivot is only confirmed several bars after the actual extreme).
HMA smoothing introduces a few bars of warm-up where the composite is unavailable.
Compatibility
Pine Script v6 open-source indicator (pane). Any symbol, any timeframe. Cross-pane elements use force_overlay=true. No request.security calls. Non-repainting (divergence pivots are confirmed-bar gated).
Defaults
Mint and red defaults, plus cyan (bull accent) and magenta (bear accent) hue-rotation targets. Top-right medium dashboard. All visualizations on. For fast intraday work, shorten the VW median length and the divergence lookback.
Indicator
Reaction Quality Heat Zones [AGPro Series]Reaction Quality Heat Zones
🧠 Core Idea
Is price reacting with clean quality, or is the zone only producing weak noise and failure pressure?
📌 Overview / What it does
Reaction Quality Heat Zones is a premium PulseWire overlay that evaluates the quality of price reactions around a live reference zone. It studies wick rejection, close location, participation, follow-through, and failed-reaction pressure to determine whether the current reaction area deserves attention.
The script produces a forward-projected heat zone, centered zone label, compact event labels, right-side state tags, and an AGPro-style panel. It is designed to show whether a reaction is clean, weak, absorbing pressure, failing, or producing follow-through.
It does not predict price direction, automate trading, or provide guaranteed entries. It is a visual context tool for reading reaction quality.
🎯 Purpose & Design Philosophy
This script was built because many traders can see a reaction after it happens, but struggle to judge the quality of that reaction in real time.
Reaction Quality Heat Zones helps traders evaluate whether a level, area, or market response is actually meaningful, or whether price is only producing low-quality movement around noise.
The mindset is quality-first: not every bounce, rejection, or reaction deserves the same weight.
⚡ Why This Script Is Different
Most tools mark support, resistance, or candle reactions as isolated events.
This script does NOT treat every wick or bounce as equally important.
Instead, it evaluates reaction quality as a combined structure: wick quality, close behavior, participation, follow-through, and failure pressure are all interpreted together.
⚙️ Methodology
1. Context Detection
The script identifies the dominant reaction side by comparing bullish and bearish reaction quality.
2. Reference Mapping
It builds a heat zone around the most relevant recent reaction boundary.
3. Reaction Evaluation
It scores the zone using wick rejection, close quality, participation, follow-through, and distance from the reaction boundary.
4. Visual Output
It displays a projected heat zone, event labels, state tags, and a structured panel.
🗺️ How to Read the Chart
Zones represent areas where reaction quality is being evaluated.
The centered zone label shows the active reaction heat score.
Labels mark clean reactions, weak reactions, absorption risk, failed reactions, and follow-through events.
Colors represent state context:
• Green = clean or follow-through reaction
• Pink = failed reaction pressure
• Yellow = absorption risk
• Indigo = weak or building reaction
The panel summarizes reaction state, direction, heat score, failure pressure, wick quality, follow-through, and next context.
🚦 Signals & States
• CLEAN REACTION → reaction quality is strong and failure pressure is controlled
• FOLLOW-THROUGH → reaction quality is strong and continuation is visible
• WEAK REACTION → reaction quality is not strong enough yet
• ABSORPTION RISK → quality exists, but failure pressure is also elevated
• FAILED REACTION → failure pressure dominates the reaction area
• REACTION BUILD → no decisive reaction state is confirmed
🔔 Alerts Logic
Alerts trigger when a new clean reaction, follow-through reaction, failed reaction, absorption risk, or weak reaction is detected.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The strongest reaction context appears when wick rejection, close quality, participation, and follow-through align.
The weakest reaction context appears when reaction quality is low and failure pressure increases.
📊 When to Use
• Support and resistance reactions
• Breakout retests
• Range boundary reactions
• Pullback reaction checks
• Intraday and swing market-structure review
⚠️ When NOT to Use
• Very low-liquidity symbols
• Random chop without clear reaction areas
• News-driven spikes
• Charts where spreads or data quality distort candles
🎛️ Key Inputs
• Reaction Lookback → controls the recent window used to build the heat zone
• Follow-Through Length → controls continuation evaluation after reaction
• Heat Threshold → defines how strong a reaction must be to qualify
• Failure Threshold → defines when failure pressure becomes important
• Zone Projection Bars → keeps all zone edges visible for publication screenshots
• Panel and label settings → control readability and layout
🖥️ Interface & Visual Design
The interface is built for fast visual interpretation.
The heat zone carries the main story, while the panel provides structured confirmation. Right-side tags keep the current state readable without burying the candles.
The visual design is intentionally premium, compact, and publication-ready.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check the active heat zone.
3. Compare heat score with failure pressure.
4. Look for clean reaction or follow-through confirmation.
5. Interpret the result within broader market structure.
🔍 Interpretation Guidelines
High heat with controlled failure pressure suggests a cleaner reaction.
High heat with high failure pressure suggests absorption risk.
Low heat suggests the reaction may not be meaningful yet.
Failed reaction pressure does not guarantee reversal. It shows that the reaction area is losing quality.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not provide guaranteed buy or sell signals.
It does not replace risk management.
⚠️ Limitations & Transparency
Reaction quality can change quickly.
Different timeframes may show different reaction behavior.
Volatility, liquidity, market sessions, and sudden news can affect how zones behave.
Outputs should always be interpreted with broader market context.
🧠 Market Context Notes
A good reaction is not only a wick.
It also needs close quality, participation, and follow-through. This script is designed to make that difference visible.
🧾 Use Case Examples
When price reacts from a zone with strong wick quality, strong close behavior, and follow-through, the heat score can confirm a cleaner reaction.
When price reacts but failure pressure rises, the zone may be vulnerable.
When price stays inside the zone without quality, the script may show weak reaction or reaction build context.
🧱 System Philosophy
AGPro Series scripts are designed to make complex market context easier to read without reducing the market to simplistic signals.
This script follows that philosophy by focusing on reaction quality instead of generic support or resistance marks.
🔐 Non-Promise Statement
No script can guarantee future price movement.
This tool provides structured context, not certainty.
📉 Risk Disclosure
Trading involves risk.
Users remain responsible for their own decisions, position sizing, and risk management.
This script does not provide financial advice or guaranteed trading outcomes.
📚 Educational Note
Use this script to study how price reacts around important areas and to compare clean reactions with weak or failed reactions across different market conditions.
Indicator
Candle Intent Map [AGPro Series]Candle Intent Map
🧠 Core Idea
Does this candle show initiative, absorption, rejection, indecision, or a real shift in intent?
📌 Overview / What it does
Candle Intent Map is a candle behavior and market reaction tool designed to read the internal message of price candles beyond simple bullish or bearish color.
The script evaluates body pressure, wick reaction, close location, volume context, short follow-through, and recent intent changes to classify whether the market is showing initiative, absorption, rejection, indecision, or an intent shift.
It produces compact labels, a visible intent pressure zone, right-side context tags, and a clean AG Pro panel. It does not predict price, automate decisions, or promise that a candle pattern will continue.
🎯 Purpose & Design Philosophy
This script was built because many candlestick tools stop at basic pattern recognition.
A candle is not only a shape. It is a relationship between body commitment, wick reaction, volume participation, close location, and what happens immediately after that candle forms.
Candle Intent Map helps traders who want to read candle quality, initiative pressure, reaction zones, and follow-through context without turning the chart into a crowded pattern scanner.
⚡ Why This Script Is Different
Most candle tools focus on named formations such as engulfing candles, pin bars, doji candles, or simple color changes.
This script does NOT treat every candle pattern as an automatic signal.
Instead, it studies whether the candle has enough internal pressure, reaction quality, volume context, and follow-through to deserve attention.
The goal is not to label more candles. The goal is to label the candles that tell a clearer market story.
⚙️ Methodology
1. Context Detection
The script measures body-to-range ratio, upper wick pressure, lower wick pressure, close location, and relative volume participation.
2. Intent Classification
Candles are classified into initiative, absorption, rejection, indecision, or intent shift conditions based on body pressure, wick behavior, and directional commitment.
3. Reaction Evaluation
The script builds a reaction-quality score using body strength, wick reaction, close placement, volume context, and short follow-through behavior.
4. Visual Output
The strongest current candle intent context is mapped as a visible intent zone, compact event labels, right-side state tags, and a structured AG Pro panel.
🗺️ How to Read the Chart
Zones represent the most recent candle intent pressure area.
Labels show important candle intent events such as bullish intent, bearish intent, absorption, rejection, indecision, or intent shift.
Colors separate constructive pressure, defensive pressure, neutral reaction, and absorption-style behavior.
The panel summarizes current intent, direction, body pressure, wick reaction, follow-through, quality score, and next context.
🚦 Signals & States
• BULL INTENT → bullish body pressure with meaningful close location and participation
• BEAR INTENT → bearish body pressure with meaningful close location and participation
• ABSORPTION → strong reaction behavior with compressed body and meaningful volume
• LOWER REJECT → lower wick reaction suggesting downside rejection
• UPPER REJECT → upper wick reaction suggesting upside rejection
• INDECISION → low body commitment with balanced wick behavior
• INTENT SHIFT → recent candle intent changes direction with enough pressure to matter
🔔 Alerts Logic
Alerts trigger when the script detects bullish candle intent, bearish candle intent, candle absorption, or candle intent shift.
These alerts are attention markers only. They highlight a candle context that may deserve review, not a trade instruction.
🧩 Confluence Logic
The strongest context appears when candle body pressure, wick reaction, close location, volume participation, and follow-through point in the same direction.
When these components align, the candle intent quality score becomes stronger.
📊 When to Use
• During active trend continuation phases
• Around reaction zones and pullback areas
• Near support, resistance, VWAP, or liquidity references
• When evaluating whether a candle has real participation behind it
• When comparing initiative candles against absorption or rejection candles
⚠️ When NOT to Use
• Extremely illiquid markets
• Very noisy low-timeframe environments
• News-driven candles with abnormal spreads
• Symbols with unreliable volume data
• Situations where broader market context is ignored
🎛️ Key Inputs
• Volume Context Length → controls the relative volume comparison window
• Follow-Through Length → controls how short-term continuation is measured
• Initiative Body Ratio → changes how strict the initiative candle filter is
• Reaction Wick Ratio → changes how strict wick-based rejection and absorption filters are
• Visible Zone Bars → controls how much of the recent chart the intent zone covers
• Label and Panel Font Size → controls visual readability
🖥️ Interface & Visual Design
The interface is designed to stay clean, readable, and publication-friendly.
The chart focuses on one main intent zone, compact event labels, right-side context tags, and a structured panel.
The visual hierarchy is intentional: zone first, current state second, historical intent events third.
🧪 Practical Usage Workflow
1. Read the panel to understand the current candle intent state
2. Check the intent zone and its position relative to price
3. Review recent labels to understand whether initiative, absorption, or rejection has dominated
4. Compare the quality score with current follow-through
5. Interpret the output inside broader market context
🔍 Interpretation Guidelines
A strong intent label does not mean price must continue.
A rejection label does not mean reversal is guaranteed.
An absorption label means the candle structure showed reaction and participation, but confirmation still depends on the following market behavior.
The best interpretation comes from combining candle intent with structure, liquidity, volatility, and timeframe context.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed buy or sell signals.
It does not replace risk management or independent analysis.
⚠️ Limitations & Transparency
Candlestick interpretation changes across timeframes.
Volume quality may differ between markets and exchanges.
Fast volatility expansion can make recent candle intent less stable.
Low-liquidity conditions may create misleading wick or body readings.
Users should always interpret outputs within broader market context.
🧠 Market Context Notes
Candle intent is most useful when combined with structure, liquidity, trend quality, volatility, and acceptance behavior.
One candle rarely tells the whole story. The value comes from understanding whether candle pressure is supported or rejected by what comes next.
🧾 Use Case Examples
When price reaches a known support area and the script prints a lower rejection label with improving quality, the trader can study whether downside pressure is being rejected.
When a strong body candle prints with high quality and follow-through, the trader can evaluate whether initiative pressure is entering the market.
When absorption appears inside a range, the trader can watch whether trapped pressure develops or fades.
🧱 System Philosophy
Candle Intent Map is part of the AGPro Series approach: clean visual tools that focus on market context, reaction quality, and decision support rather than prediction claims.
The script is designed to make candle behavior easier to read while keeping the trader responsible for interpretation.
🔐 Non-Promise Statement
No script can know the future.
No candle label guarantees continuation or reversal.
This tool provides structured visual context only.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly.
All decisions remain the responsibility of the user.
This script does not provide financial advice or guaranteed trading outcomes.
📚 Educational Note
Use this script as an educational and analytical companion for studying candle behavior, reaction quality, and short-term intent context.
Indicator
Wick Absorption Reversal Planner [AGPro Series]Wick Absorption Reversal Planner
🧠 Core Idea
Is an extended wick showing absorption, and did the candle body reclaim enough structure to treat the reversal context seriously?
📌 Overview / What it does
Wick Absorption Reversal Planner maps extended wick reactions as absorption pockets and evaluates whether price can reclaim the body rail after that reaction.
The script displays a wick absorption pocket, body reclaim rail, failure shelf, room reference, event labels, right-side tags, optional bar coloring, and a compact AG Pro dashboard with a 0-100 reversal score.
It does not predict reversals. It helps organize wick absorption, body reclaim quality, pressure, room, invalidation, and action state.
🎯 Purpose & Design Philosophy
Many candle tools label rejection candles, engulfing candles, or generic wick events.
This script was built for the next layer: whether the wick reaction is being absorbed and whether the candle body can reclaim the important zone afterward.
It helps traders separate random wick noise from a structured absorption pocket with a body reclaim rail and failure logic.
⚡ Why This Script Is Different
Most wick indicators focus on the wick itself.
This script does NOT treat every long wick as a reversal signal.
Instead, it maps the wick pocket, checks body reclaim, measures pressure and room, and gives a clear action state. The goal is interpretation, not prediction.
⚙️ Methodology
1. Wick Absorption Detection
The script checks upper and lower wick size relative to ATR and total candle range.
2. Context Mapping
The wick is compared with recent structure to avoid treating every isolated candle as meaningful.
3. Body Reclaim Evaluation
After a wick absorption pocket is detected, the body reclaim rail becomes the key threshold for reversal planning.
4. Visual Output
The chart receives the wick pocket, body reclaim rail, failure shelf, room rail, labels, right-side tags, optional bar coloring, and dashboard panel.
🗺️ How to Read the Chart
The wick absorption pocket marks the area created by the extended wick reaction.
The body reclaim rail shows the level price needs to recover for the reversal context to improve.
The failure shelf marks where the absorption context fails.
The room rail marks the nearest structure reference in the reversal direction.
Labels highlight wick absorption, body reclaim, pocket pressure, room tests, and absorption failure.
Colors represent context:
• Teal → bullish wick absorption
• Pink → bearish wick absorption or failure
• Gold → room reference or waiting context
• Indigo → pocket pressure or monitoring context
The panel summarizes:
• Pocket
• Reversal Score
• Pressure
• Room
• Action
🚦 Signals & States
• Bull Wick Absorption → lower wick absorption pocket detected
• Bear Wick Absorption → upper wick absorption pocket detected
• Body Reclaim → price reclaimed the body rail after absorption
• Pocket Pressure → price is testing the wick pocket without clean reclaim
• Room Test → price reached the active room reference
• Absorption Failed → price crossed the failure shelf
• READY → body reclaim and score quality are strong enough to monitor
• MONITOR → pocket or reclaim context is active but not fully ready
• WAIT → no strong active context exists
• INVALIDATED → the wick absorption context failed
• EXPIRED → the pocket is too old to remain active
🔔 Alerts Logic
Alerts can trigger when a bullish or bearish wick absorption pocket appears, when body reclaim appears, when READY state appears, when pocket pressure appears, when the room rail is reached, or when absorption fails.
Alerts are attention markers only. They are not trade instructions.
🧩 Confluence Logic
The context becomes stronger when wick size, wick-to-range ratio, structural location, participation, body reclaim, and room align.
For example, a lower wick into recent structure followed by body reclaim and available room is more useful than a random wick in the middle of noisy price action.
📊 When to Use
• Reversal watch areas after extended wicks
• Support/resistance reactions with visible rejection
• Pullbacks where wick absorption may matter
• Failed breakdown or failed breakout reactions
• Liquid symbols with readable candles and stable spreads
• 1h, 4h, and 1D charts where wick structure is visible
⚠️ When NOT to Use
• Very low-liquidity markets
• Symbols with unreliable candle structure
• Random spike candles from illiquid prints
• News candles with unstable spreads
• Extremely noisy ranges where every candle has exaggerated wicks
🎛️ Key Inputs
• ATR Length → controls normalization for wick size and visual spacing
• Wick Context Lookback → controls structural comparison
• Minimum Wick ATR → controls required wick size
• Minimum Wick / Range → controls required wick dominance inside the candle
• Minimum Relative Volume → filters very thin wick reactions
• Body Reclaim Buffer ATR → controls the reclaim rail threshold
• Failure Buffer ATR → controls where absorption fails
• Room Lookback → controls the room reference
• Visual settings → control pocket, rails, labels, tags, panel, and bar colors
🖥️ Interface & Visual Design
The visual hierarchy is designed around the wick pocket first, then the reclaim rail.
The pocket defines the reaction, the body reclaim rail defines improvement, the failure shelf defines risk, and the panel gives a quick state read.
The goal is a premium wick absorption map without turning the chart into a generic candle-label board.
🧪 Practical Usage Workflow
1. Check whether a wick absorption pocket is active
2. Read the reversal score and action state
3. Inspect the body reclaim rail
4. Compare pocket pressure with room
5. Watch the failure shelf
6. Confirm the context with broader structure and timeframe alignment
🔍 Interpretation Guidelines
A wick absorption pocket means the candle showed a meaningful wick reaction in context.
Body reclaim means price recovered the reclaim rail after the wick reaction.
READY means the rule-based context has enough quality to monitor.
Room is a reference for structure, not a promised target.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not a guaranteed reversal system.
It is not a generic candle pattern detector.
It is not a volume absorption zone engine.
It is not an automated trading tool.
It does not provide financial advice.
It does not guarantee reversal, continuation, profit, or a specific target.
⚠️ Limitations & Transparency
Wick behavior depends on market structure, liquidity, volatility, session conditions, and timeframe.
Some long wicks are random noise.
Some absorption pockets may fail quickly.
The score is a rule-based context score, not a certainty model.
🧠 Market Context Notes
Wicks can show rejection, absorption, stop activity, or simply noise.
The key question is whether price can reclaim the body rail after the wick event.
Use the pocket as context, not as confirmation by itself.
🧾 Use Case Examples
When price prints a long lower wick into recent structure, the script can map a bullish wick absorption pocket.
If price later reclaims the body rail, the script marks body reclaim and updates the panel state.
If price loses the failure shelf, the script marks absorption failure.
🧱 System Philosophy
This script follows the AGPro Series approach: turn a familiar chart behavior into a structured decision-support map.
The focus is not prediction. The focus is wick context, body reclaim, pressure, room, invalidation awareness, and visual clarity.
🔐 Non-Promise Statement
No script can remove uncertainty from markets.
This tool does not promise accuracy, profitability, or future price movement.
Its purpose is to organize wick absorption context so the user can interpret the chart more clearly.
📉 Risk Disclosure
Trading involves risk.
Market conditions can change quickly, and any analytical output can fail.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Do not read a wick by itself.
The strongest reads usually come when wick absorption, body reclaim, structure, participation, and room align.
Indicator
Round Number Rejection Planner [AGPro Series]# Round Number Rejection Planner
🧠 Core Idea
Is the round number acting as rejection, magnet, or failed reference?
📌 Overview / What it does
Round Number Rejection Planner is a psychological price level decision-support script built to evaluate how price reacts around nearby round numbers.
The script maps adaptive round-number bands, detects wick-based rejection behavior, separates rejection from magnet conditions, scores the context from 0 to 100, and summarizes the current state inside a compact AG Pro panel.
It does not predict price direction, automate trades, or provide guaranteed signals. It is designed to organize round-number context, rejection quality, distance, failure risk, and action state into a clean visual workflow.
🎯 Purpose & Design Philosophy
Round numbers often attract attention because they are easy reference points for traders, algorithms, stops, targets, and liquidity.
This script was built for traders who want to evaluate whether price is respecting a psychological level, getting pulled toward it, or failing to reject it cleanly.
The design supports structured observation instead of treating every round-number touch as a signal.
⚡ Why This Script Is Different
Most tools draw psychological levels or mark round numbers.
This script does NOT stop at drawing levels.
Instead, it evaluates the behavior around the level: wick rejection, close location, distance, reaction count, volatility fit, and failure risk.
⚙️ Methodology
1. Adaptive Round Level Detection
2. Psychological Band Mapping
3. Wick Rejection Evaluation
4. Magnet And Failure Risk Detection
5. 0-100 Rejection Score
6. Panel And Alert Output
🗺️ How to Read the Chart
The active round band marks the nearest psychological price zone.
Nearby round rails show the next upper and lower round references.
READY REJECTION labels appear when wick response, close location, and score quality align.
Magnet or failed-reference states appear when price interacts with the level without a clean rejection.
The panel summarizes Round Level, Rejection Score, Distance, Failure Risk, and Action.
🚦 Signals & States
• READY → A qualified round-number rejection has formed.
• MONITOR → Price is near the round number but rejection quality is not yet strong enough.
• WAIT → No active round-number context is close enough to evaluate.
• INVALIDATED → Price failed through the level instead of rejecting it.
• BLOCKED → The script cannot define a valid round-number context.
🔔 Alerts Logic
Bullish Round Number Rejection Ready triggers when price rejects upward from a round-number band with enough quality.
Bearish Round Number Rejection Ready triggers when price rejects downward from a round-number band with enough quality.
Round Number Magnet Warning triggers when price is close to the level but rejection quality is weak.
Round Number Rejection Invalidated triggers when price fails through the level instead of respecting it.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The rejection score combines wick strength, close distance from the level, proximity, recent reaction count, relative volume, and volatility fit.
When several of these conditions align, the context becomes stronger.
When they do not align, the script remains in WAIT, MONITOR, INVALIDATED, or BLOCKED state.
📊 When to Use
• Psychological level analysis
• Intraday price action workflows
• Round-number rejection setups
• Stop and liquidity reaction observation
• Support and resistance context around visible price levels
⚠️ When NOT to Use
Avoid relying on this script in extremely illiquid markets, very noisy symbols, holiday sessions, or conditions where round numbers are not meaningful to participants.
It should not be used as a standalone decision tool without broader market context, risk planning, and independent confirmation.
🎛️ Key Inputs
• Round Level Mode controls whether level spacing is automatic or manual.
• Manual Round Step defines custom level spacing when manual mode is selected.
• Round Band ATR controls the width of the psychological level band.
• Max Active Distance controls how close price must be before evaluation begins.
• Minimum Ready Score controls how strong the rejection must be before READY appears.
• Failure Risk Threshold controls when weak rejection or magnet behavior blocks READY.
• Visual settings control bands, rails, labels, right-side tags, panel location, and font size.
🖥️ Interface & Visual Design
The interface is designed to make the active psychological level readable without flooding the chart.
The chart shows the active round band, nearby round rails, failure shelf, and relevant rejection labels.
The AG Pro panel provides compact decision context while preserving chart visibility.
🧪 Practical Usage Workflow
1. Check the active round level in the panel.
2. Observe whether price is touching or rejecting the round band.
3. Read the rejection score and failure risk.
4. Check whether the action state is READY, MONITOR, WAIT, INVALIDATED, or BLOCKED.
5. Confirm the context with broader trend, liquidity, volatility, and risk structure.
🔍 Interpretation Guidelines
A higher rejection score means the round-number reaction is cleaner according to the script logic.
A high failure risk means the level may be acting more like a magnet or failed reference.
READY means the rejection context deserves attention, not that price must reverse.
MONITOR means price is near the level but the reaction is not yet clean enough.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed signals.
It does not replace risk management or independent analysis.
⚠️ Limitations & Transparency
Round-number behavior changes across markets, symbols, timeframes, volatility regimes, and liquidity conditions.
The score is rule-based and depends on wick behavior, close location, distance, relative volume, and ATR normalization.
Different symbols may require different round-step or sensitivity settings.
🧠 Market Context Notes
Round-number rejection can be more meaningful when aligned with liquidity response, trend context, session timing, volume participation, and nearby structure.
Weak rejection near a level can become magnet behavior instead of a clean turn.
🔐 Non-Promise Statement
No script can guarantee future price behavior.
This tool provides structured visual context only.
📉 Risk Disclosure
Trading involves risk.
Users remain responsible for their own decisions.
This script is for educational and analytical purposes only and does not provide financial advice or guaranteed trading outcomes.
Indicator
Price Rejection Readiness [AGPro Series]Price Rejection Readiness
🧠 Core Idea
Is the current price rejection strong enough to deserve attention now?
📌 Overview / What it does
Price Rejection Readiness is a chart-first rejection planning tool built to evaluate whether a wick-based rejection is only noise, a watch condition, a confirmed context, or a failed attempt.
The script produces a 0-100 Readiness Score, a rejection pocket, wick-quality label, confirmation rail, invalidation rail, target review rail, controlled chart labels, and a compact AG Pro decision panel.
It does not predict price direction, automate execution, or mark every wick as important. Its role is to organize rejection context into a cleaner planning workflow.
🎯 Purpose & Design Philosophy
Many rejection tools stop at candle recognition. They mark long wicks, pin bars, or local reactions without showing whether the context is ready, waiting, confirmed, or failing.
This script was built for traders who want a decision-support layer around rejection behavior. It helps users evaluate validity, quality, confirmation, risk boundary, target room, and the next action from one clean visual structure.
The design philosophy is planning first. A rejection candle should not be treated as a conclusion by itself. It should be evaluated through structure, participation, follow-through, and risk context.
⚡ Why This Script Is Different
Most tools focus on detecting a wick or highlighting a candle pattern.
This script does NOT clone Rejection Block Quality, Pin Bar Quality Filter, Reaction Efficiency Meter, order-block tools, or generic support/resistance maps.
Instead, it asks whether the current rejection is ready to be monitored as a structured plan. It scores wick dominance, close location, local reference pressure, volume response, and follow-through, then maps a practical confirmation rail, invalidation rail, and target review area.
⚙️ Methodology
1. Context Detection
The script measures the current candle body, wick dominance, wick share, close location, volume response, and local reference pressure.
2. Reference Mapping
When a valid rejection forms, the script draws a candle-native rejection pocket from the wick extreme to the rejection body area. This is not a broad support/resistance zone.
3. Reaction Evaluation
The engine converts wick quality, close strength, reference pressure, volume behavior, and follow-through into a 0-100 Readiness Score.
4. Visual Output
Accepted plans create a rejection pocket, confirmation rail, invalidation rail, target review rail, event labels, and a compact AG Pro panel.
🗺️ How to Read the Chart
Rejection Pocket = the candle-native area where the rejection originated.
Confirmation Rail = the price boundary that must be respected or exceeded according to the selected confirmation mode.
Invalidation Rail = the price boundary beyond the wick where the rejection plan is no longer valid.
Target Review Rail = a projected review area based on the distance from active price to invalidation.
Labels = compact event markers for Ready, Confirmed, Failed Rejection, and Target Review.
Colors = teal for bullish rejection context, pink for bearish rejection context, indigo for confirmation, gold for target review, and red for invalidation.
Panel = shows Rejection Side, Readiness, Wick Quality, Confirmation, Invalid / Target, and Action.
🚦 Signals & States
• Scan → no active rejection plan exists.
• Watch → rejection quality meets the minimum threshold but still needs confirmation.
• Ready → rejection quality is strong enough to review risk and confirmation context.
• Confirmed → the active rejection plan confirmed according to the selected confirmation mode.
• Failed → price closed beyond the invalidation rail.
• Target Review → price reached the projected target review rail.
🔔 Alerts Logic
Bullish Rejection Ready triggers when a bullish rejection reaches the configured readiness threshold.
Bearish Rejection Ready triggers when a bearish rejection reaches the configured readiness threshold.
Rejection Confirmed triggers when the active rejection plan confirms according to the selected confirmation mode.
Rejection Failed triggers when the active plan closes beyond its invalidation rail.
Target Review Reached triggers when price reaches the projected target review rail.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The readiness score becomes stronger when wick dominance, close location, local reference pressure, volume response, and directional follow-through align.
No single component is treated as absolute. A visually strong wick can still receive a weaker score if close location, participation, or follow-through are poor.
📊 When to Use
• Price-action review after a visible wick rejection
• Pullback or reaction environments where rejection quality matters
• Breakout failure, continuation delay, or reversal-watch contexts
• Charts where traders need risk and confirmation boundaries, not just a candle marker
⚠️ When NOT to Use
• Extremely low-liquidity symbols
• Very noisy micro timeframes with poor candle quality
• News spikes where wick structure can be unstable
• Markets where volume data is missing or unreliable
🎛️ Key Inputs
• Sensitivity → controls how strict the rejection engine is.
• Reference Lookback → defines the local edge used for context.
• Minimum Readiness Score → filters weak rejection plans.
• Confirmation Mode → controls how strict the confirmation rail behavior must be.
• Invalidation Buffer ATR → places the risk rail beyond normal candle noise.
• Target Review Multiple → projects the target review rail from risk distance.
• Visual settings → control pockets, rails, labels, object count, label size, panel visibility, panel location, theme, and panel font size.
🖥️ Interface & Visual Design
The interface is built around a compact AG Pro panel and a chart-first planning layer.
The pocket, rails, and labels are intentionally direct: they show where the rejection originated, where confirmation is evaluated, where the plan fails, and where review becomes relevant.
The design avoids crowded signal dumping and keeps the chart readable while still providing enough visible labels for publication-quality context.
🧪 Practical Usage Workflow
1. Read the panel to identify the active rejection side and readiness score.
2. Check the rejection pocket to see where the wick response originated.
3. Compare price behavior against the confirmation rail.
4. Use the invalidation rail and target review rail as planning context.
5. Interpret the next-action state instead of treating the label as a command.
🔍 Interpretation Guidelines
A high readiness score means the rejection has stronger structural qualities, not certainty.
A confirmed rejection means price respected the selected confirmation rule, not that future direction is guaranteed.
A failed rejection means the active plan lost its defined risk boundary and should be reviewed as invalidated context.
Target Review means the projected review area was reached and the context should be reassessed.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not auto trading
• Not guaranteed signals
• Not an order-block or rejection-block detector
• Not a generic support/resistance map
⚠️ Limitations & Transparency
Rejection quality can vary across symbols, timeframes, volatility regimes, and volume conditions.
The local reference component is designed for context, not complete market-structure mapping.
The target rail is a review boundary, not a promised destination.
The script is rule-based and reactive. It organizes information after conditions appear on the chart.
🧠 Market Context Notes
Wick rejection can be more meaningful when it appears near a local edge, forms with clear close behavior, and receives follow-through.
It can be weaker when the candle is isolated, the close location is poor, or the market is moving through unstable volatility.
Use the tool as a structured context layer inside a broader trading plan.
🧾 Use Case Examples
When price forms a lower-wick rejection near a recent local low and closes strongly above the body area, the planner may create a bullish readiness state with a visible pocket and confirmation rail.
When price forms an upper-wick rejection near a recent local high but later closes beyond the invalidation rail, the planner marks the setup as failed instead of keeping the rejection narrative active.
🧱 System Philosophy
AGPro tools are designed to turn raw chart events into structured interpretation.
This script follows that philosophy by transforming rejection candles into a readiness workflow: score, state, risk, confirmation, target review, and next action.
🔐 Non-Promise Statement
No script can remove uncertainty from markets.
This tool highlights rule-based rejection context and leaves final interpretation to the user.
📉 Risk Disclosure
Trading involves risk.
This script is for educational and analytical use only.
It does not provide financial advice, investment advice, or guaranteed trading outcomes.
Users are responsible for their own decisions, risk management, and market interpretation.
📚 Educational Note
Use Price Rejection Readiness as a structured reading layer for rejection behavior, not as a standalone decision system.
Indicator
Volume Rejection Planner [AGPro Series]Volume Rejection Planner
🧠 Core Idea
Did unusual volume appear at rejection in a way that changes the current decision context?
📌 Overview / What it does
Volume Rejection Planner is a chart-first volume reaction tool built to evaluate wick-led rejection events that appear with elevated relative volume near a recent range edge.
The script maps a volume rejection zone, a risk edge, a follow-through trigger, a room guide, compact state labels, and a clean AGPro planning panel. It converts relative volume, wick quality, close location, range-edge context, follow-through progress, and time decay into a 0-100 rejection quality score.
It does not predict price, automate trades, or mark every volume spike as meaningful. Its purpose is to organize the decision window after volume appears at a rejection wick.
🎯 Purpose & Design Philosophy
This script was built for traders who want more context than a raw volume spike or a simple wick marker.
High volume at a wick can mean participation, absorption, rejection, or noise depending on where it appears and what follows next. The planner focuses on that next question: is the rejection being accepted by follow-through, or is the event failing at its risk edge?
The design supports a decision-engine mindset: identify the rejection, measure its quality, locate invalidation, monitor follow-through, and decide whether the context deserves review, patience, or dismissal.
⚡ Why This Script Is Different
Most tools focus on volume spikes, climax candles, or generic wick rejection labels.
This script does NOT clone a Volume Climax Detector, does not become a Rejection Block tool, and does not draw generic support/resistance zones.
Instead, it treats high-volume wick rejection as a short lifecycle: event, test, accepted follow-through, failed risk edge, expired window, or room-guide reach. The main output is not a raw signal; it is a structured planning state.
⚙️ Methodology
1. Context Detection
The script builds a recent range-edge reference and checks whether the rejection wick occurs near the upper or lower edge.
2. Reference Mapping
When a qualified event appears, it maps the rejection zone, risk edge, follow-through trigger, and room guide.
3. Reaction Evaluation
The model scores relative volume, wick ratio, wick size, close location, edge quality, room, follow-through progress, pressure against the event, and time decay.
4. Visual Output
The result is shown through centered zone text, compact event labels, risk/room guides, candle tint, alerts, and a premium AGPro decision panel.
🗺️ How to Read the Chart
Volume Rejection Zone = the wick-led rejection area created by elevated participation at a range edge.
Risk Edge = the invalidation boundary beyond the rejection wick.
Follow-Through Trigger = the distance price must move away from the rejection to show accepted context.
Room Guide = a forward planning reference used to judge whether the reaction has enough space to matter.
Labels = compact BULL VRP / BEAR VRP markers for primary volume rejection events. Optional secondary labels can show monitor, accepted follow-through, expiry, and room-guide reach when the user wants a more detailed chart.
Colors = teal highlights bullish rejection context, pink highlights bearish rejection context, amber highlights watch context, indigo highlights room/guide context, and red highlights invalidation.
Panel = summarizes Rejection Volume, Wick Quality, Follow-Through, Risk Edge, and Action.
The panel focuses on fresh active context only. Older historical zones can remain on the chart without forcing the panel to display stale invalidated events.
🚦 Signals & States
• Volume Rejection Event → elevated relative volume appears with a qualifying wick near a range edge.
• Testing → the event exists, but accepted follow-through is not confirmed yet.
• Monitor → the active score is high enough to keep the context under review.
• Accepted → price has moved away from the rejection wick enough to confirm follow-through context.
• Risk Edge Broken → the event has moved through its invalidation boundary.
• Window Expired → the event did not confirm within the selected follow-through window.
• Room Guide Reached → the accepted context reached its planning guide.
🔔 Alerts Logic
Alerts trigger when a qualified volume rejection event appears, when the active context reaches READY, when the state changes, when the risk edge is broken, or when the room guide is reached.
Alerts are attention markers only. They are not trade instructions, entry commands, exit commands, or automated strategy rules.
🧩 Confluence Logic
The strongest context appears when high relative volume, a clear wick ratio, a strong close back away from the wick, range-edge location, enough room, and quick follow-through align.
If price fails to move away from the rejection wick, presses back into the risk edge, or loses too much time, the planner downgrades the context.
📊 When to Use
• Range-edge reactions
• Wick rejection events with unusually high participation
• Failed pushes into recent highs or lows
• Markets where volume data is readable
• Situations where the next decision depends on whether rejection follows through
⚠️ When NOT to Use
• Very low-liquidity symbols with unreliable volume
• Extremely noisy micro-timeframes
• News spikes where wick behavior may distort quickly
• Markets where volume reporting is fragmented or unavailable
• Situations where the user expects a direct buy/sell signal
🎛️ Key Inputs
• Sensitivity → controls how strict the volume, wick, and edge requirements are.
• Range Edge Lookback → defines the recent high/low context used for rejection location.
• Minimum Rejection Score → controls which events are important enough to draw.
• Confirmation Mode → adjusts how quickly follow-through can be accepted.
• Follow-Through Window → controls how long the event remains active.
• Risk Edge Buffer → adjusts the invalidation boundary beyond the wick.
• Room Guide ATR → controls the planning guide distance.
• Visual settings → control zones, rails, primary labels, secondary labels, failure labels, candle tint, label density, and text size.
• Limit Historical Drawing / Historical Drawing Bars → controls how far back the script creates visual objects, improving load speed on long histories while preserving the current planning view.
• Adaptive HTF Events → slightly relaxes event thresholds on daily and weekly charts so higher timeframes do not look empty while intraday behavior stays stricter.
🖥️ Interface & Visual Design
The interface is designed to stay chart-first.
The rejection zone provides the visual anchor. The risk edge and room guide frame the planning context. Labels stay compact and offset away from candles so the chart remains active without becoming crowded.
The AGPro panel uses a merged blue title row and a compact five-row decision layout.
🧪 Practical Usage Workflow
1. Read the panel action state.
2. Check whether the rejection zone is bullish or bearish.
3. Review the wick quality and relative volume.
4. Compare current price against the follow-through trigger and risk edge.
5. Treat alerts as attention markers, then evaluate broader market context.
🔍 Interpretation Guidelines
Think in terms of event lifecycle, not prediction.
A stronger score means the rejection had better participation, wick structure, location, room, and follow-through behavior. A weaker or decaying score means the event is losing quality under the current rule set.
Accepted follow-through does not mean price must continue. It means the rejection event has met the script's conditions for stronger review context.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not auto trading
• Not guaranteed signals
• Not a generic volume spike marker
• Not a Rejection Block clone
• Not a Volume Climax Detector clone
⚠️ Limitations & Transparency
The script is rule-based and depends on recent price, volatility, wick structure, and volume behavior.
Different timeframes can change how rejection and follow-through appear. Volatility spikes can temporarily distort wick size and edge quality. Symbols with weak or unreliable volume may produce less useful readings.
Outputs should always be interpreted within broader structure, liquidity, volatility, and risk context.
🧠 Market Context Notes
Volume rejection is most useful when the wick appears at a meaningful location and the follow-up reaction is clear.
High volume alone is not enough. Location, close behavior, risk edge, and follow-through all matter.
🧾 Use Case Examples
When price pushes above a recent range edge, prints a strong upper wick with elevated RVOL, and then moves away from that wick, the planner may classify the context as accepted bearish rejection.
When price probes below a recent range edge, prints a strong lower wick with elevated RVOL, but then closes below the risk edge, the planner may classify the event as invalidated.
🧱 System Philosophy
AGPro planning tools are designed to help traders evaluate context before reacting.
This script follows that approach by turning high-volume wick rejection into a structured decision question: is the event valid, strong, risky, accepted, or fading?
🔐 Non-Promise Statement
No indicator can provide certainty.
This tool provides structured visual context and rule-based attention markers. It does not guarantee continuation, reversal, rejection, or follow-through.
📉 Risk Disclosure
Trading involves risk. Market conditions can change quickly, and no script can remove uncertainty.
Users are responsible for their own analysis, risk management, and decisions.
This script is for educational and analytical use only and does not provide financial advice.
📚 Educational Note
Use the planner to study how volume behaves at wick rejection points, how quickly follow-through appears after rejection, and how risk edges help separate valid context from failed reaction events.
Indicator
Range Rejection Planner [AGPro Series]Range Rejection Planner
🧠 Core Idea
Is price rejecting a range edge with enough quality to monitor back toward the midline?
📌 Overview / What it does
Range Rejection Planner is a chart-first range reaction decision engine built to evaluate whether price is rejecting the active range edge with enough structure to deserve attention.
The script maps one relevant range edge, a focused edge-reaction zone, wick rejection behavior, close-back-inside quality, midline room, invalidation shelf, failure risk, event labels, alerts, and a clean AGPro planning panel. These components are converted into a 0-100 Rejection Score and a clear next-action state.
It does not predict price movement, automate trades, draw a full support/resistance library, or guarantee that a range edge will hold. Its purpose is to organize the range-edge rejection review process with practical risk and midline context.
🎯 Purpose & Design Philosophy
This script was built for traders who want to evaluate range-edge reactions without turning the chart into a crowded level map.
Many range tools show boundaries, fills, or breakout markers, but they often stop before answering the practical planning question: did price actually reject the edge, is there room back to the midline, and where does the idea fail?
The design philosophy is simple: a range-edge rejection is only useful when the edge interaction, wick response, close-back-inside behavior, midline room, and failure shelf can be read together.
⚡ Why This Script Is Different
Most tools focus on drawing support/resistance zones, marking every range touch, or highlighting breakouts.
This script does NOT clone Support Resistance Reaction Map, does not build a multi-level S/R inventory, and does not act as a broad breakout or break-retest scanner.
Instead, it focuses on one active range and one active edge. The main output is not a buy/sell signal. It is a planning state that helps users decide whether the edge rejection deserves review, whether midline room exists, and whether failure risk is rising.
⚙️ Methodology
1. Context Detection
The script builds an active range from previous bars and identifies whether price is interacting with the upper or lower edge.
2. Reference Mapping
It maps the relevant edge zone, the range midline, and an invalidation shelf beyond the rejected edge.
3. Reaction Evaluation
The model scores edge proximity, wick rejection, close-back-inside quality, relative volume response, midline room, and active range quality.
4. Visual Output
The result appears as a centered range-edge zone, a midline review path, guide lines, compact state labels, alerts, and a premium AGPro panel.
🗺️ How to Read the Chart
Zones = the active range-edge zone shows the relevant upper or lower boundary being evaluated. The zone label is centered inside the shape.
Midline Path = the projected review area between the rejected edge and the range midline. It helps show whether there is enough room for interpretation.
Labels = compact markers show EDGE WATCH, REJECT READY, MIDLINE REVIEW, MIDLINE HIT, or FAILURE RISK context.
Colors = teal supports lower-edge rejection context, pink supports upper-edge rejection context, amber highlights review states, and indigo marks midline references.
Panel = the panel summarizes Range Edge, Rejection Score, Midline Room, Failure Risk, and Action.
🚦 Signals & States
• EDGE WATCH → price is probing a range edge and early rejection conditions are developing.
• REJECT READY → range-edge rejection quality reached the selected score threshold.
• MIDLINE REVIEW → an active rejection context is being monitored toward the range midline.
• MIDLINE HIT → price reached the active range midline after a rejection context.
• FAILURE RISK → price crossed the invalidation shelf beyond the rejected edge.
• RANGE WAIT → a range exists, but the edge interaction is not strong enough yet.
🔔 Alerts Logic
Alerts trigger when the planner enters EDGE WATCH, REJECT READY, MIDLINE REVIEW, MIDLINE HIT, or FAILURE RISK.
Each alert is an attention marker. Alerts are not trade instructions, entry commands, exit commands, or automated strategy rules.
🧩 Confluence Logic
The strongest context appears when several conditions align:
Range edge probe + strong rejection wick + close back inside the range + supportive relative volume + meaningful room back to the midline + a clear invalidation shelf.
When these components weaken, the planner can stay in EDGE WATCH, return to RANGE WAIT, or shift into FAILURE RISK.
📊 When to Use
• During range-bound markets where edge reactions matter
• When price probes the upper or lower boundary of a recent range
• When evaluating whether an edge rejection has enough midline room
• When a trader wants risk and invalidation context around a range reaction
• On liquid symbols where wicks, volume, and range boundaries are readable
⚠️ When NOT to Use
• Extremely low-liquidity symbols with unreliable wicks or volume
• Very noisy micro-timeframes where range edges shift too often
• News-driven volatility spikes that distort normal range behavior
• Strong trend expansion where range rejection is no longer the main context
• Situations where the user expects automatic buy/sell signals
🎛️ Key Inputs
• Range Edge Mode → chooses Auto, Upper Edge Rejection, or Lower Edge Rejection.
• Active Range Lookback → controls the previous-bar range used for edge evaluation.
• Range Edge Zone ATR → controls the width of the focused edge-reaction zone.
• Close-Back-Inside ATR → defines how much price should close back inside after probing an edge.
• Invalidation Shelf ATR → controls the failure-risk reference beyond the rejected edge.
• REJECT READY Threshold → sets the minimum 0-100 score for the strongest rejection state.
• Label and Panel Font Size → controls visual readability.
🖥️ Interface & Visual Design
The interface is designed to stay chart-first.
The active edge zone gives the main visual reference. The midline path shows the review area. The invalidation shelf defines where the rejection context becomes weaker. The panel provides a compact decision summary without replacing the chart.
The AGPro panel follows the standard first row format: one merged blue title row containing only the script name.
🧪 Practical Usage Workflow
1. Read the panel state and Rejection Score.
2. Check which range edge is active.
3. Review the wick rejection and close-back-inside context.
4. Compare the midline room with the invalidation shelf.
5. Treat alerts as attention markers, then evaluate broader market context.
🔍 Interpretation Guidelines
Think in terms of rejection quality, not prediction.
A stronger score means multiple range-reaction conditions are aligned. A weaker score means the edge interaction may be early, noisy, too close to the midline, or vulnerable to failure.
Failure Risk does not forecast a breakout. It means the active rejection context has crossed its rule-based failure shelf and should be reviewed.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not an auto-trading system
• Not a guaranteed signal tool
• Not a generic support/resistance map
• Not a full range breakout scanner
⚠️ Limitations & Transparency
The script is rule-based and depends on recent price, range, wick, volatility, and volume behavior.
Timeframe changes can alter the active range, score, edge zone, midline room, and invalidation shelf. Volatility spikes can temporarily distort range boundaries. Symbols with unreliable volume may produce weaker participation readings.
Outputs should always be interpreted with broader market structure, liquidity conditions, and independent risk planning.
🧠 Market Context Notes
Range-edge rejection is most useful when the market is respecting a bounded structure and still has meaningful space toward the middle of the range.
If price starts expanding beyond the edge, this tool intentionally shifts attention from rejection quality toward failure risk instead of calling continuation or reversal with certainty.
🧾 Use Case Examples
When price probes above the active range high, prints a strong upper wick, closes back inside, and still has clear room toward the midline, the planner may classify the context as REJECT READY.
When price touches the lower edge but closes weakly, lacks wick response, or sits too close to the midline, the planner may remain in EDGE WATCH or RANGE WAIT.
When price crosses the invalidation shelf beyond the rejected edge, the planner marks FAILURE RISK for review.
🧱 System Philosophy
AGPro planning tools are designed to help traders make a decision, not simply see another signal.
This script follows that philosophy by turning range rejection into a practical decision question:
Is the edge interaction valid?
How strong is the rejection?
Where is the midline reference?
Where is the failure shelf?
What should I review now?
🔐 Non-Promise Statement
No script can remove uncertainty.
No state, score, label, zone, line, or alert guarantees a future market outcome.
📉 Risk Disclosure
Trading involves risk. Market conditions can change quickly, and no script can eliminate uncertainty.
Users are responsible for their own analysis, risk management, and decisions.
This script is for educational and analytical use only and does not provide financial advice.
📚 Educational Note
Use the planner to study how range edges behave across different markets and timeframes. The most useful reading comes from comparing the edge zone, wick response, midline room, failure shelf, panel state, and broader market context together.
Indicator
Stop Run Reversal Planner [AGPro Series]Stop Run Reversal Planner
🧠 Core Idea
Did a stop run create a confirmed reversal context with clear risk, target room, and next-action guidance?
📌 Overview / What it does
Stop Run Reversal Planner is a chart-first stop-run reversal planning tool built to evaluate wick sweeps around recent range extremes.
The script detects when price runs beyond a prior high or low, checks whether price closes back through the swept reference, evaluates confirmation candle quality, scores volume response, measures target room, and converts the context into a 0-100 reversal readiness score.
It produces stop-run wick zones, confirmation labels, reclaim rails, invalidation guides, reversal target bands, alerts, and a clean AGPro planning panel. It does not predict price direction, automate execution, or claim that every stop run must reverse.
🎯 Purpose & Design Philosophy
This script was built for traders who want structure after a fast liquidity run instead of another simple sweep marker.
Stop-run candles can look dramatic, but not every sweep deserves the same attention. Some sweeps reclaim cleanly, confirm with stronger candle behavior, and leave usable target room. Others are only noise, continuation, or incomplete rejection.
The design supports a planning workflow: identify the stop run, wait for confirmation, read the readiness score, check invalidation, review target room, and decide whether the context deserves attention.
⚡ Why This Script Is Different
Most stop-hunt tools focus on mapping sweep zones or marking that liquidity was taken.
This script does NOT try to clone a stop-hunt map, liquidity grab detector, liquidity sweep engine, order block map, or broad SMC dashboard.
Instead, it focuses on the post-stop-run reversal decision. The key question is not only "was a stop run printed?" The key question is "did that stop run turn into a confirmed reversal plan with acceptable reclaim quality, invalidation logic, and target room?"
⚙️ Methodology
1. Context Detection
The script tracks recent range highs and lows, then checks whether price runs beyond one side with a meaningful wick sweep.
2. Reference Mapping
The swept reference becomes the reclaim rail. The sweep extreme becomes the invalidation guide. The opposite side of the reference range, or an ATR fallback, becomes the target-room guide.
3. Reaction Evaluation
The scoring model evaluates wick sweep quality, close-back-inside behavior, confirmation candle quality, relative volume response, trend-turn context, and available target room.
4. Visual Output
Qualified contexts are displayed through stop-run wick zones, confirmation labels, reclaim rails, invalidation lines, target bands, alerts, and a compact AGPro panel.
🗺️ How to Read the Chart
Zones = the stop-run wick zone between the swept reference and the sweep extreme.
Labels = stop-run watch, confirmed reversal, invalidation, and target-band review markers.
Colors = teal highlights bullish reversal contexts, pink highlights bearish reversal contexts, amber marks watch states, and indigo marks target-room areas.
Panel = the panel summarizes Stop Run, Confirmation, Reclaim Quality, Invalidation, and Action.
🚦 Signals & States
• Bull Stop Run Watch → price swept below the recent low and may need confirmation.
• Bear Stop Run Watch → price swept above the recent high and may need confirmation.
• Bull Reversal Confirmed → downside stop run reclaimed with enough confirmation quality and target room.
• Bear Reversal Confirmed → upside stop run rejected with enough confirmation quality and target room.
• Reversal Invalidated → price crossed the active invalidation guide.
• Target Band Review → price reached the active reversal target band.
🔔 Alerts Logic
Alerts trigger when a bull or bear stop-run watch appears, when a bull or bear reversal confirmation becomes active, when invalidation is crossed, or when the target band is reached.
Alerts are attention markers. They are not trade instructions, entry signals, exit signals, or automation commands.
🧩 Confluence Logic
The reversal context becomes stronger when multiple factors align:
Stop-run wick + close back inside + strong confirmation candle + supportive volume response + usable target room + cleaner trend-turn behavior.
When only one or two factors appear, the script keeps the context in watch mode or ignores it completely.
📊 When to Use
• After fast wick sweeps beyond recent highs or lows
• Around failed breakout or failed breakdown attempts
• In range-edge reversal review workflows
• When price reclaims a swept level and needs structured confirmation
• When a trader wants risk, target, and action context instead of only a sweep marker
⚠️ When NOT to Use
• Very low-liquidity symbols
• Extremely noisy micro-timeframes
• News candles with abnormal gaps
• Strong one-way trend conditions where stop runs may continue rather than reverse
• Situations where the user wants an automatic buy or sell signal
🎛️ Key Inputs
• Stop-Run Reference Lookback → controls the recent high / low range used for sweep detection.
• Sensitivity → changes how selective wick-sweep detection should be.
• Confirmation Mode → controls how strict the post-sweep confirmation candle must be.
• Minimum Reversal Score → sets the 0-100 score required before a confirmed plan is drawn.
• Confirmation Window Bars → defines how long a stop run can wait for confirmation.
• Target Room ATR Fallback → creates a practical target guide when the opposite range side is not useful.
• Invalidation Buffer ATR → places the invalidation guide beyond the sweep extreme.
• Visual settings → control zones, rails, target bands, labels, panel location, panel theme, and font sizes.
🖥️ Interface & Visual Design
The interface is built to stay chart-first.
The panel gives the decision summary. The stop-run zone shows where the sweep happened. The reclaim rail shows the level price had to recover. The invalidation line marks the level that would weaken the reversal context. The target band gives a structured review area without making a promise.
The layout is intentionally compact, readable, and publication-friendly.
🧪 Practical Usage Workflow
1. Read the panel to identify the current Stop Run and Confirmation state.
2. Check whether the chart shows a stop-run wick zone and reclaim rail.
3. Review the Reclaim Quality score and confirmation label.
4. Compare the current price with invalidation and target-band guides.
5. Interpret the context with broader market structure, liquidity, and volatility conditions.
🔍 Interpretation Guidelines
A stop-run watch means price has swept a recent edge, but the reversal plan is not yet confirmed.
A confirmed reversal state means the script found stronger reclaim, candle, volume, and target-room conditions.
An invalidation marker means the active context weakened according to the script rules.
A target-band review marker means price reached a planned review area, not that the move must stop there.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not an auto trading system
• Not a guaranteed signal tool
• Not a stop-hunt zone map
• Not a liquidity grab detector
• Not an order block or FVG map
• Not a generic SMC dashboard
⚠️ Limitations & Transparency
Stop-run behavior changes across symbols, sessions, and timeframes.
Some stop runs continue instead of reversing. Some reclaim attempts fail after confirmation. Some symbols have weak or unreliable volume data, which can affect the score model.
The script provides structured context, not certainty.
🧠 Market Context Notes
Stop-run reversal behavior often appears near visible range edges, prior swing highs, prior swing lows, and failed breakout areas.
The strongest contexts usually combine a meaningful sweep, clean reclaim, strong confirmation candle, usable room, and a clear invalidation guide.
🧾 Use Case Examples
When price runs below a recent low, leaves a strong lower wick, closes back above the swept reference, and confirms with stronger follow-through, the script may classify the context as a bullish stop-run reversal plan.
When price runs above a recent high, rejects the move, closes back below the swept reference, and confirms with stronger downside behavior, the script may classify the context as a bearish stop-run reversal plan.
🧱 System Philosophy
Stop Run Reversal Planner follows the AGPro decision-engine approach: the goal is not to add another signal to the chart, but to organize the decision around validity, score, risk, target room, and next action.
🔐 Non-Promise Statement
No script can guarantee a reversal, outcome, or market reaction.
This script provides rule-based analytical context only.
📉 Risk Disclosure
Trading involves risk.
Users remain responsible for their own decisions, execution, risk management, and interpretation.
This script does not provide financial advice.
📚 Educational Note
Use the output as a structured review layer. The best readings usually come from combining the planner state with broader market structure, timeframe context, liquidity conditions, and personal risk rules.
Indicator
Candle Rejection Quality Planner [AGPro Series]Candle Rejection Quality Planner
🧠 Core Idea
Is the rejection candle strong enough to create a valid planning context, or is it only a noisy wick?
📌 Overview / What it does
Candle Rejection Quality Planner is a chart-first rejection candle decision tool designed to evaluate wick-led rejection without turning the chart into a generic candlestick signal map.
The script identifies bullish and bearish rejection candles, scores their quality from 0 to 100, then tracks what happens next through a confirmation rail, failure edge, target-room guide, wick quality zone, compact labels, alerts, and a clean AG Pro planning panel.
It does not predict future price movement, automate entries, print buy/sell commands, or replace broader market context. Its purpose is to help traders judge whether a rejection candle has enough structure to deserve attention.
🎯 Purpose & Design Philosophy
This script was built to fill the gap between simple wick markers and broader reversal systems.
Many traders can see a long wick. The harder question is whether that wick has enough close quality, candle range, participation, and follow-through potential to become useful context.
The design supports a planner mindset: evaluate the candle, define the confirmation level, know where the idea weakens, and wait for the next state instead of reacting to every wick.
⚡ Why This Script Is Different
Most tools focus on detecting a named candle pattern such as a pin bar, engulfing candle, or generic rejection marker.
This script does NOT clone Pin Bar Quality Filter, Engulfing Candle Quality, Rejection Block Quality, order block logic, liquidity sweep logic, or a broad candlestick scanner.
Instead, it focuses on the planning process after a rejection candle appears: quality score, confirmation rail, failure edge, target-room guide, and next-action state. The candle is not treated as an entry by itself. It is treated as a context that must prove itself.
⚙️ Methodology
1. Context Detection
The script measures candle range, upper wick, lower wick, close location, and relative volume to detect wick-led rejection context.
2. Reference Mapping
When a qualified rejection candle appears, the planner maps a wick quality zone, confirmation rail, failure edge, and target-room guide.
3. Reaction Evaluation
The model updates the 0-100 Rejection Quality score as confirmation develops, pressure works against the candle, time passes, or price reaches the planning guide.
4. Visual Output
The chart displays the wick zone, rail, guide lines, controlled labels, candle tint, alerts, and AG Pro panel.
🗺️ How to Read the Chart
Zones = the rejected wick area of the qualifying candle. The zone is a candle-quality reference, not a support/resistance map.
Labels = rejection context, confirmation, failure edge breaks, target-room completion, and sparse active-state markers.
Colors = teal supports bullish rejection context, pink marks bearish rejection or failure pressure, yellow marks caution, and indigo marks confirmation review.
Panel = a compact decision view showing Candle Side, Rejection Quality, Confirmation, Failure Risk, and Action.
🚦 Signals & States
• Bullish Rejection → lower wick rejection with stronger close location and sufficient quality.
• Bearish Rejection → upper wick rejection with weaker close location and sufficient quality.
• Awaiting Confirmation → a qualified rejection exists, but price has not accepted beyond the rail.
• Confirmed → price accepted beyond the confirmation rail.
• Failure Edge Broken → the rejection context lost its defined failure edge.
• Target Room Reached → price reached the planning guide mapped from the rejection context.
🔔 Alerts Logic
Alerts can trigger when a qualified rejection candle opens a new context, when confirmation rail acceptance appears, when the failure edge breaks, when target room is reached, or when the active planner state changes.
Alerts are attention markers. They are not trade instructions and do not imply a guaranteed outcome.
🧩 Confluence Logic
The strongest planner states appear when wick dominance, close location, reasonable candle range, supportive volume, and confirmation beyond the rail align together.
When those elements are weaker or delayed, the planner shifts toward monitor, weak confirmation, expired context, or invalidated state.
📊 When to Use
• Price-action review around visible reaction candles
• Liquid symbols where candle range and volume are readable
• Intraday or swing charts where wick rejection can be evaluated with ATR context
• Discretionary planning workflows that need confirmation and failure references
⚠️ When NOT to Use
• Extremely low-liquidity symbols with unreliable candles
• Very noisy low-timeframe charts where wicks appear randomly
• News spikes where candle range is distorted
• Situations where broader market structure is being ignored
🎛️ Key Inputs
• Sensitivity → changes how selective the rejection engine is.
• Minimum Rejection Quality → sets the 0-100 score required before a context appears.
• Dominant Wick Share → controls how much wick dominance is required.
• Close Location Quality → controls how strongly price must close away from the rejected wick.
• Confirmation Window → controls how long the script waits for follow-through.
• Failure Edge Buffer → defines the invalidation reference beyond the rejection wick.
• Target-Room Guide R → draws the planning guide from rejection close to failure edge distance.
• Visual settings → control zones, rails, labels, candle tint, panel location, panel theme, and font sizes.
🖥️ Interface & Visual Design
The interface is intentionally compact and chart-first.
The wick quality zone keeps attention on the candle that created the context. The confirmation rail and failure edge create a structured review path. The AG Pro panel summarizes the current state without covering the chart with a broad dashboard.
🧪 Practical Usage Workflow
1. Read the panel and identify the active candle side.
2. Check the wick quality zone and confirmation rail.
3. Watch whether price confirms, weakens, expires, or breaks the failure edge.
4. Use the target-room guide as a planning reference, not as a promise.
🔍 Interpretation Guidelines
A stronger score means the rejection candle has cleaner wick dominance, better close location, a more useful candle range, and stronger participation support.
A confirmed state means price has accepted beyond the rail according to the script rules.
A failed state means the active rejection context lost its defined failure edge.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not auto trading
• Not guaranteed signals
• Not a pin bar clone
• Not an engulfing candle detector
• Not a generic support/resistance or order block map
⚠️ Limitations & Transparency
The script is rule-based and depends on candle structure, ATR, relative volume, and follow-through behavior.
Different timeframes can change how rejection appears. Volatility spikes can distort candle range and failure distance. Symbols with unreliable volume may produce weaker participation readings.
Outputs should always be interpreted within broader market structure, liquidity, volatility, and personal risk rules.
🧠 Market Context Notes
Rejection candles often matter more when they appear near meaningful structure, after a directional push, or during a volatility expansion attempt. The script intentionally does not build a full structure map because its narrow job is candle rejection planning.
🧾 Use Case Examples
When a candle prints a strong lower wick, closes high in its range, and then accepts above the confirmation rail, the planner may classify the context as ready for review.
When a strong upper wick appears but price fails to move beyond the confirmation rail and later breaks the failure edge, the planner marks the context as invalidated.
🧱 System Philosophy
AGPro Series tools are designed to convert visual market behavior into structured review states. This script follows that philosophy by turning a single rejection candle into a defined planning context with quality, confirmation, risk, and action fields.
🔐 Non-Promise Statement
No script can provide certainty.
No rejection candle guarantees continuation, reversal, or profitable execution.
📉 Risk Disclosure
Trading involves risk. This script is for technical analysis and educational use only.
Users remain responsible for their own analysis, position sizing, execution decisions, and risk management.
This script does not provide financial advice or guaranteed trading outcomes.
📚 Educational Note
Use the tool to study how rejection candles behave after they appear. The value is in structured observation, not automatic decision-making.
Indicator
Failed Reclaim Planner [AGPro Series]Failed Reclaim Planner
🧠 Core Idea
Did price lose a visible swing shelf, retest it, and fail to reclaim that level with enough rejection quality, risk clarity, and continuation room to matter?
📌 Overview / What it does
Failed Reclaim Planner is a chart-first failed reclaim decision engine built around visible swing shelves.
The script identifies when price breaks a confirmed swing high or swing low shelf, watches the retest of that broken level, and evaluates whether the reclaim attempt fails with enough rejection quality to become meaningful context.
It produces visible shelf zones, failed reclaim pockets, BULL / BEAR quality labels, planning room bands, risk / target guides, and a compact AGPro panel with a 0-100 failure score, rejection quality, room, and next-action state.
This script does not predict price direction or automate execution. It is designed to organize reclaim-failure context so traders can review structure, risk, and room more clearly.
🎯 Purpose & Design Philosophy
The script was built for traders who want more than another signal marker.
Most reclaim tools show whether price crossed a level. Failed Reclaim Planner focuses on the decision process after a visible shelf breaks: was the retest valid, did the reclaim fail, how strong was the rejection, where is invalidation, and is there enough room for the idea to matter?
The design supports a planning mindset: identify the broken shelf, wait for the retest, evaluate the failed reclaim, check room, and then decide whether the context deserves attention.
⚡ Why This Script Is Different
Most tools focus on fixed references such as VWAP, moving averages, prior-day levels, or broad support/resistance zones.
This script does NOT act as a generic S/R scanner, VWAP reclaim indicator, EMA reclaim map, previous-day sweep tool, or liquidity sweep engine.
Instead, it focuses on one narrow workflow: failed reclaim planning after a visible swing shelf breaks. The reference level is visible on the chart, the failure pocket is mapped, the rejection is scored, and the panel summarizes the next action.
⚙️ Methodology
1. Swing Shelf Detection
The script confirms visible swing highs and swing lows using left/right pivot structure.
2. Shelf Break Activation
When price closes beyond a confirmed shelf with enough ATR-adjusted separation, that shelf becomes an active reclaim reference.
3. Retest and Failure Evaluation
During the retest window, the script checks whether price returns into the shelf area and then rejects the reclaim. The failure score evaluates retest depth, close rejection, wick quality, volume participation, follow-through, and continuation room.
4. Planning Output
Qualified events create a scored BULL / BEAR label, a failed reclaim pocket, planning room band, invalidation guide, target-room guide, and panel state.
🗺️ How to Read the Chart
Shelf Zones = visible broken swing shelves that price may attempt to reclaim.
Failure Pockets = highlighted reclaim-failure areas where the retest rejected the broken shelf.
Planning Room Bands = projected continuation room after a qualified failed reclaim. These are planning references, not targets or promises.
Score Labels = compact BULL / BEAR labels showing the failure quality score.
Risk / Target Guides = dashed and dotted reference lines that help locate invalidation and continuation room.
Panel = the decision layer showing Reclaim State, Failure Score, Rejection Quality, Room, and Action.
🚦 Signals & States
• UP SHELF → a visible swing high was broken and is now monitored as a reclaim shelf.
• DN SHELF → a visible swing low was broken and is now monitored as a reclaim shelf.
• Bear Failure Active → bearish failed reclaim context is active after a broken shelf retest.
• Bull Failure Active → bullish failed reclaim context is active after a broken shelf retest.
• Failure Score → 0-100 quality score for the reclaim failure.
• Rejection Quality → how cleanly price rejected the reclaim attempt.
• Room → ATR-based continuation space available from the failure context.
• Action → the current planning state shown in plain language.
🔔 Alerts Logic
Alerts are available for:
• Bearish Failed Reclaim
• Bullish Failed Reclaim
• New Broken Shelf
• Shelf Recovered
Alerts are attention markers. They are not trade instructions, automation signals, or guaranteed outcomes.
🧩 Confluence Logic
The context becomes stronger when several conditions align:
• A visible swing shelf has already broken
• Price retests the broken shelf
• The reclaim attempt fails with wick and close rejection
• Participation is not weak
• There is still continuation room beyond the failed reclaim
When these elements align, the script treats the event as a stronger planning context.
📊 When to Use
• After clear swing highs or swing lows have broken
• During retests of broken structure
• In trending or transitioning markets where reclaim failure can matter
• When you want risk, invalidation, and room mapped visually
• When you prefer decision support over raw signal spam
⚠️ When NOT to Use
• Very low-liquidity charts
• Extremely noisy sideways chop
• News-driven spikes where ATR behavior becomes distorted
• Markets with poor swing structure
• Situations where you specifically need VWAP, session, or moving-average reclaim logic
🎛️ Key Inputs
• Sensitivity → adjusts how quickly the script reacts to shelf breaks and failures.
• Swing Left Bars / Swing Right Bars → define how visible swing shelves are confirmed.
• Retest Window Bars → controls how long a broken shelf remains active for reclaim evaluation.
• Minimum Failure Score → sets the quality threshold for confirmed failed reclaim events.
• Shelf Buffer ATR → controls the thickness of the reclaim shelf zone.
• Target Room ATR Multiple → controls fallback room projection when nearby structure is limited.
• Show Planning Room Band → displays the continuation room corridor after qualified failed reclaim events.
• Visual Memory Bars → controls how long historical zones, labels, and guide objects remain visible.
• Panel / Label Settings → control panel location, theme, visibility, and font size.
🖥️ Interface & Visual Design
The interface is designed to look like a planning tool, not a crowded signal overlay.
The chart carries the core story: shelf break, retest, failed reclaim pocket, score label, planning room, and risk / target references.
The panel uses the AGPro public-release standard: one merged blue header row containing only the script name. The rest of the panel summarizes the current decision state without covering the chart.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check whether a visible shelf is active or already failed.
3. Review the failed reclaim pocket and BULL / BEAR score label.
4. Compare the rejection quality with the planning room band.
5. Use risk / target guides as context references.
6. Interpret the output within broader market structure.
🔍 Interpretation Guidelines
A higher Failure Score means the reclaim failure is cleaner under the script's rules. It does not guarantee continuation.
Rejection Quality helps distinguish weak shelf touches from stronger failed reclaim behavior.
Room shows whether there is enough practical continuation space for the context to matter.
The Action row is the main planning summary. It is designed to guide review, not replace trader judgment.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not auto trading
• Not guaranteed signals
• Not a VWAP reclaim tool
• Not an EMA reclaim map
• Not a previous-day sweep reclaim script
• Not a generic support/resistance scanner
⚠️ Limitations & Transparency
Different timeframes can produce different shelves because swing structure changes with timeframe.
Volatility changes can affect shelf width, label spacing, and room projections.
Low-volume conditions may weaken the reliability of wick and participation components.
Sideways markets may create repeated shelf tests that require extra discretion.
🧠 Market Context Notes
Failed reclaim behavior often becomes important when price loses a visible structural shelf and cannot regain that area on the retest.
This is different from a successful reclaim, liquidity sweep, VWAP reclaim, or moving-average retest. The script is intentionally narrow so the chart remains focused on one decision workflow.
🧾 Use Case Examples
Example 1:
Price breaks below a confirmed swing low, retests that shelf from underneath, leaves rejection, and fails to reclaim. A BEAR score label appears with a failure pocket and planning room.
Example 2:
Price breaks above a confirmed swing high, retests the broken shelf, holds above it, and rejects back upward. A BULL score label appears with risk and room context.
🧱 System Philosophy
Failed Reclaim Planner follows the AGPro decision-engine approach:
Do not just show another signal.
Show the reference.
Score the failure.
Map the risk.
Map the room.
Summarize the next action.
🔐 Non-Promise Statement
No script provides certainty.
No failed reclaim guarantees continuation.
Outputs should be interpreted as structured analytical context, not as a promise of future price behavior.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own decisions, position sizing, execution, and risk management.
This script does not provide financial advice, investment advice, or guaranteed trading outcomes.
📚 Educational Note
Use this script to study how broken swing shelves behave when price attempts to reclaim them. The strongest value comes from comparing the shelf zone, failure pocket, score label, planning room, and panel state with broader market structure and your own rules.
Indicator
Reversal Confirmation Planner [AGPro Series]Reversal Confirmation Planner
🧠 Core Idea
Is a reversal actually confirming, or is it still only an early reaction?
📌 Overview / What it does
Reversal Confirmation Planner is a chart-first planning tool built to separate early reversal reactions from structured confirmation context.
The script detects sweep or wick-rejection reactions around recent swing references, then evaluates whether the reaction develops into a cleaner confirmation plan. It maps a confirmation pocket, invalidation edge, target-room band, compact event labels, alerts, and a clean AG Pro decision panel.
It does not predict reversals, automate entries, or scan every classical reversal pattern. The goal is to help traders organize the confirmation phase: reaction quality, confirmation close, momentum turn, volume support, room, invalidation, and next action.
🎯 Purpose & Design Philosophy
This script was built for traders who do not want to treat every wick, sweep, or counter-move as a valid reversal.
Many reversal tools mark the first reaction. This planner waits for structure. It asks whether price has moved from reaction into confirmation, whether momentum is turning, whether volume supports the shift, and whether the active plan has enough room before the next projected guide.
The design supports a decision-making workflow. It does not ask the user to chase every signal. It helps the user decide whether the reversal context is still early, building, confirming, confirmed, failed, expired, or already testing its room.
⚡ Why This Script Is Different
Most reversal tools focus on detecting a pattern, labeling a wick, or marking every possible counter-trend reaction.
This script does NOT behave like a broad reversal-pattern scanner, double-top/double-bottom detector, head-and-shoulders module, 1-2-3 map, wedge detector, Turtle Soup map, liquidity sweep tool, or generic support/resistance zone script.
Instead, it works as a confirmation planner. The core workflow is reaction → confirmation pocket → invalidation edge → target-room context → next-action state. This keeps the public concept narrow, useful, and clearly separate from other AGPro reversal tools.
⚙️ Methodology
1. Context Detection
The script watches for bullish or bearish reversal reactions using sweep behavior, wick rejection, candle close location, and prior directional context.
2. Reference Mapping
Once a reaction qualifies, the planner creates a confirmation line, confirmation pocket, invalidation edge, and target-room guide.
3. Reaction Evaluation
The model scores sweep or rejection quality, confirmation progress, momentum turn, volume support, and available room.
4. Visual Output
The chart shows the active confirmation pocket, centered target-room band, risk/target guide lines, compact labels, alert conditions, and an AG Pro panel with the current decision state.
🗺️ How to Read the Chart
Confirmation Pocket = the area between the reaction reference and the confirmation close line.
Invalidation Edge = the level beyond the reaction extreme where the active confirmation plan is considered failed by the script rules.
Target-Room Band = a projected planning zone that shows whether the reversal has enough forward room relative to the active risk distance.
Labels = compact state markers such as REACTION, CONFIRMING, CONFIRMED, FAILED, EXPIRED, ROOM TESTED, or PLAN.
Colors = teal supports bullish reversal planning, pink supports bearish reversal planning, amber marks developing context, indigo marks target-room context, and red marks invalidation or failed confirmation.
Panel = summarizes Reversal Stage, Confirmation Score, Invalidation, Room, and Action.
🚦 Signals & States
• REACTION → an early sweep or rejection is active, but confirmation is not complete.
• BUILDING → the context is improving, but the confirmation close is not fully qualified.
• CONFIRMING → price is testing or closing through the confirmation line with sufficient structure to review.
• CONFIRMED → the confirmation score and close behavior meet the script threshold.
• ROOM TESTED → the projected target-room guide has been reached after confirmation.
• FAILED → the active plan violated its invalidation edge.
• EXPIRED → the reaction did not confirm within the selected confirmation window.
🔔 Alerts Logic
The script includes alerts for bullish reaction, bearish reaction, bullish confirmation, bearish confirmation, failed confirmation, and high-quality confirmation.
Alerts trigger when the internal rule conditions are met. They are attention markers for chart review, not trade instructions, automated entries, or guaranteed reversal signals.
🧩 Confluence Logic
The strongest confirmation context appears when multiple layers align:
• A clear sweep or rejection reaction forms.
• Price progresses through the confirmation pocket.
• Momentum begins to turn in the reaction direction.
• Volume support is not weak.
• The target-room band offers enough room relative to invalidation distance.
When these layers align, the confirmation score becomes stronger. When one or more layers are weak, the state usually remains reaction, building, expired, or failed.
📊 When to Use
• After visible sweep or rejection behavior.
• During possible reversal transitions after directional extension.
• Around swing references where confirmation matters more than the first wick.
• 4H swing-review charts, where the default label spacing and confirmation pockets usually have the cleanest visual balance.
• Daily charts when the user wants fewer but more selective reversal confirmation states.
• In markets where traders want to compare reaction quality, invalidation, and room before acting.
• For discretionary review of crypto, forex, indices, equities, and commodities on liquid charts.
⚠️ When NOT to Use
• Extremely low-liquidity symbols with unreliable wicks or volume.
• Very noisy micro-timeframes where reaction candles are unstable.
• News spikes or extreme volatility events where confirmation levels can be crossed erratically.
• Charts where the user expects a complete reversal-pattern scanner.
• Situations where the user wants automated trade execution.
🎛️ Key Inputs
• Confirmation Mode → controls whether labels and alerts wait for bar close or update live.
• Swing Reference Length → defines the recent swing references used for sweep-based reactions.
• Sensitivity → adjusts how selective the reaction model is.
• Confirmation Window Bars → limits how long a reaction can wait for confirmation.
• Minimum Reaction Score → controls the quality required before tracking a candidate.
• CONFIRMED Threshold → controls the minimum 0-100 score required for confirmed state.
• Preferred Room / Risk → adjusts how much forward room is preferred relative to invalidation distance.
• Visual settings → control pockets, bands, guide lines, labels, panel position, panel theme, and font sizes.
🖥️ Interface & Visual Design
The interface is built around a premium chart-first workflow.
The confirmation pocket and target-room band are concept-native visuals, not generic support/resistance zones. Their labels are centered inside the boxes for cleaner chart reading.
The default visual preset is tuned for 4H-style swing review: enough labels to keep the chart informative, but enough spacing to avoid a crowded reversal scanner look.
The AG Pro panel uses a compact structure with one merged blue title row and five decision rows. It is designed to show only the current planning context without turning the chart into a dashboard-heavy script.
🧪 Practical Usage Workflow
1. Read the panel state.
2. Check whether the chart is showing REACTION, BUILDING, CONFIRMING, CONFIRMED, FAILED, or EXPIRED.
3. Review the confirmation pocket and invalidation edge.
4. Compare target-room context against the room/risk readout.
5. Use alerts as review prompts, not as trade instructions.
🔍 Interpretation Guidelines
Treat the first reaction as incomplete information.
A higher score means the reaction has developed more confirmation structure according to the script rules. It does not mean the reversal must continue.
A failed or expired state is also useful information. It tells the user that the reaction did not confirm cleanly under the selected rules.
🚫 What This Script Is NOT
• Not a prediction engine.
• Not financial advice.
• Not auto trading.
• Not guaranteed signals.
• Not a broad reversal-pattern scanner.
• Not a full liquidity sweep system.
• Not a generic support/resistance zone tool.
⚠️ Limitations & Transparency
All outputs are rule-based and depend on the selected inputs, timeframe, and symbol behavior.
Swing references confirm with natural delay. Wick structure can be noisy on low-liquidity symbols. Volume quality varies across markets. Fast volatility can cause reactions to confirm and fail quickly.
The confirmation score is an internal comparison model. It is useful for reading this script's framework, but it is not an objective probability model.
🧠 Market Context Notes
Reversal confirmation is strongest when price reacts from a meaningful extension, then follows through with cleaner close behavior and improving participation.
The script is intentionally focused on the confirmation phase. It does not attempt to map every higher-timeframe structure, order block, fair value gap, harmonic pattern, or reversal formation.
🧾 Use Case Examples
When price sweeps below a recent swing low, closes back above it, then starts progressing through the confirmation pocket, the planner may shift from REACTION to BUILDING or CONFIRMING.
When price confirms but the room/risk readout is weak, the user can see that the reversal may be structurally less attractive inside this framework.
When price violates the invalidation edge before confirmation, the planner marks the context as FAILED instead of leaving the reaction visually ambiguous.
🧱 System Philosophy
The AGPro approach is to build decision engines, not decorative signal boards.
This script focuses on one clear question: did the reversal reaction earn confirmation, or is it still only a reaction?
🔐 Non-Promise Statement
No script can confirm future price movement with certainty.
This tool provides structured context, not guarantees.
📉 Risk Disclosure
Trading involves risk.
This script is for educational, analytical, and chart-review purposes only. It does not provide financial advice, investment advice, or guaranteed trading outcomes.
Users remain responsible for their own decisions, risk management, position sizing, and broader market analysis.
📚 Educational Note
Use the planner to study how reactions mature, fail, expire, or confirm under consistent rules. The value is in disciplined interpretation, not in treating any single label as a complete trading system.
Indicator
Volatility Stop Run Planner [AGPro Series]Volatility Stop Run Planner
🧠 Core Idea
Is the current volatility spike a stop-run review context, or is it behaving more like real expansion?
📌 Overview / What it does
Volatility Stop Run Planner is a chart-first volatility risk and execution-readiness tool designed to evaluate sharp ATR expansion around recent range edges.
The script studies wick expansion, ATR load, close recovery, range-edge penetration, reclaim quality, and early follow-through. It then converts qualified events into a 0-100 planner score, a clear next-action state, reclaim guides, invalidation guides, target-room references, stop-run review zones, expansion review zones, and a clean AGPro planning panel.
It does not predict where price must go next. It does not automate entries or exits. It is built to organize volatile stop-run and expansion contexts so traders can evaluate the event with more structure.
🎯 Purpose & Design Philosophy
This script was built for traders who need a practical decision framework during fast volatility spikes.
Many charts look most confusing exactly when volatility expands: wicks stretch, stops may be triggered, range edges are breached, and the candle can either reclaim or continue. This planner fills that gap by asking whether the spike is showing stop-run characteristics, real expansion behavior, or a cooldown state that still needs confirmation.
The design supports a planning mindset: identify the event, evaluate quality, locate the reclaim level, define invalidation context, estimate target room, and decide what deserves attention next.
⚡ Why This Script Is Different
Most stop-run tools focus on liquidity sweeps, stop-hunt zones, or level raids.
This script does NOT try to become another liquidity grab detector, stop-hunt map, order block map, or generic sweep marker.
Instead, it focuses on the volatility event itself. It evaluates whether a spike around a recent range edge is recovering, rejecting, expanding, or entering a cooldown window. The core output is not a buy or sell signal. It is a planner state that helps the user decide whether the current volatility context deserves review, patience, or no action.
⚙️ Methodology
1. Context Detection
The script measures ATR load, candle range relative to ATR, wick dominance, body efficiency, and recent range-edge interaction.
2. Reference Mapping
It maps the recent high / low reference range, the reclaim level, the spike extreme, the invalidation guide, and the target-room reference.
3. Reaction Evaluation
The model scores stop-run risk, reclaim quality, volatility load, range-edge penetration, and expansion quality. These components are blended into a 0-100 planner score.
4. Visual Output
Qualified events are displayed through stop-run review zones, expansion review zones, reclaim lines, active risk / target guides, optional volatility cooldown boxes, premium labels, alerts, and a compact AGPro panel.
🗺️ How to Read the Chart
Zones = stop-run or expansion review areas created around qualified volatility spike events.
Labels = compact event markers showing the detected context, planner score, score tier, and next-action state.
Colors = bullish reclaim contexts use AGPro teal, bearish reclaim contexts use AGPro pink, and expansion / neutral review contexts use controlled accent tones.
Panel = the panel summarizes Spike State, Planner Score, Stop-Run Risk, Reclaim Quality, Risk / Target, Volatility Load, and Action.
🚦 Signals & States
• Bull Stop-Run → downside spike below the recent range edge followed by reclaim-quality behavior.
• Bear Stop-Run → upside spike above the recent range edge followed by rejection-quality behavior.
• Expansion Up → volatility spike closes cleanly above the recent range edge with stronger body efficiency.
• Expansion Down → volatility spike closes cleanly below the recent range edge with stronger body efficiency.
• Spike Watch → volatility is elevated, but the candle has not yet produced enough reclaim or expansion evidence.
• Normal Load → no qualified volatility event is currently detected.
🔔 Alerts Logic
Alerts trigger when the planner detects a qualified Bull Stop-Run Review, Bear Stop-Run Review, Expansion Up Review, Expansion Down Review, or Spike Watch context.
These alerts are attention markers. They are not trade instructions, entry signals, exit signals, or automated strategy commands.
🧩 Confluence Logic
The strongest planner states appear when multiple conditions align:
ATR spike + wick expansion + range-edge penetration + reclaim quality + clean risk / target context.
When the spike reclaims the reference level with strong wick rejection, the stop-run review context becomes stronger. When the candle closes beyond the range edge with strong body efficiency, the expansion review context becomes stronger.
📊 When to Use
• Around sudden volatility spikes
• Near recent range highs or lows
• During breakout or breakdown attempts
• After large wick candles that need structured interpretation
• When deciding whether a fast move deserves review, patience, or no action
⚠️ When NOT to Use
• Extremely low-liquidity symbols
• Very noisy micro-timeframes
• News-driven candles with abnormal gaps
• Markets where ATR is distorted by isolated historical spikes
• Situations where the user expects a simple signal-only entry tool
🎛️ Key Inputs
• Sensitivity → controls how selective the spike and stop-run planner should be.
• Reference Lookback → defines the recent range edge used for spike evaluation.
• ATR Length → normalizes volatility, invalidation, target room, and label spacing.
• Minimum Planner Score → sets the score required before events are drawn.
• Confirmation Mode → controls how strict reclaim or expansion confirmation should be.
• Cooldown Bars → defines the post-spike visual review window.
• Visual settings → control zones, labels, guides, panel theme, panel location, and font sizes.
🖥️ Interface & Visual Design
The interface is designed to stay chart-first.
The panel provides the decision summary. The chart zones show where the volatility event happened. The reclaim line identifies the reference level. The risk / target guides frame the active review context without turning the script into a trade command system.
The visual hierarchy is intentionally compact, premium, and readable.
🧪 Practical Usage Workflow
1. Read the panel to identify the current Spike State and Planner Score.
2. Check whether the chart is showing a stop-run review, expansion review, or spike watch context.
3. Compare the reclaim line with the candle close and wick behavior.
4. Review the invalidation and target-room guides.
5. Interpret the event within broader market structure and volatility conditions.
🔍 Interpretation Guidelines
A high stop-run risk score means the spike has stronger rejection and reclaim characteristics.
A high expansion score means the spike is behaving more like continuation through the range edge.
A cooldown window means the event needs follow-through review rather than immediate interpretation.
No single score should be read in isolation. The strongest use case is to combine the planner state with structure, liquidity, trend, and timeframe context.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not an auto trading system
• Not a guaranteed signal tool
• Not a liquidity grab detector
• Not a stop-hunt zone map
• Not an order block or FVG map
⚠️ Limitations & Transparency
Volatility behavior changes across symbols, sessions, and timeframes.
ATR can expand sharply during news, low-liquidity gaps, or abnormal market conditions.
Some stop-run-looking candles can still continue in the same direction. Some expansion-looking candles can fail quickly. The script provides structured context, not certainty.
🧠 Market Context Notes
Stop-run behavior often appears when price briefly trades through visible reference areas and then reclaims them.
Expansion behavior often appears when price accepts beyond the reference with stronger body efficiency and less rejection.
The planner is designed to help users separate these contexts with a consistent rule-based framework.
🧾 Use Case Examples
When price spikes below a recent low, leaves a large lower wick, and closes back above the reference, the script may classify the event as a Bull Stop-Run Review.
When price expands above a recent high with a strong body close and limited upper rejection, the script may classify the event as Expansion Up.
When volatility spikes but reclaim or expansion evidence is incomplete, the script may show Spike Watch or keep the event in cooldown.
🧱 System Philosophy
Volatility Stop Run Planner follows the AGPro Series decision-engine approach:
Context first.
Risk before reaction.
Reclaim before assumption.
Expansion quality before excitement.
Attention markers instead of promises.
🔐 Non-Promise Statement
No indicator can remove uncertainty.
No state, score, label, alert, line, or zone should be interpreted as guaranteed market direction.
📉 Risk Disclosure
Trading involves risk.
Users remain responsible for their own analysis, risk management, and decisions.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
The script is designed to make volatile candles easier to review by separating stop-run behavior, expansion behavior, and cooldown context into a clean visual planning workflow.
Indicator
Rejection Block Quality [AGPro Series]Rejection Block Quality
🔹 OVERVIEW
Rejection Block Quality is an ICT-inspired detector that identifies long-wick rejection candles at swept swing pivots and grades each block by objective quality criteria. Unlike Order Block logic — which anchors to the last opposite-direction body before displacement — a Rejection Block (RB) is born from a wick that pierces a prior swing liquidity pool and closes back inside it, with the body confirming displacement on the follow-through bar. The rectangle is drawn from the wick base to the candle body, capturing the exact zone where smart money absorbed the sweep.
🎯 UNIQUE EDGE
Three design choices separate this tool from generic wick or order block indicators:
• Swing-pivot sweep requirement — a rejection is only counted when price sweeps a confirmed swing high or low before the reversal close. Stand-alone wick patterns without liquidity context are filtered out.
• Displacement confirmation window — the candle following the rejection must travel at least 0.6× ATR in the reversal direction, within a 1–5 bar lookahead. No displacement, no block.
• Quality tiering (A / B / C) from three orthogonal factors — wick-to-body ratio, displacement magnitude, and untested freshness. An exceptional wick ratio (≥5× body) promotes a block to A tier regardless of other scores, preserving rare high-conviction rejections.
🛠️ METHODOLOGY
Detection pipeline on every bar:
1. Confirm a pivot sweep using a user-configurable lookback (default 5 bars each side).
2. Check the wick-to-body ratio against a minimum threshold (default 1.8×), with the dominant wick on the sweep side.
3. Queue the candle as a pending block and wait for displacement confirmation.
4. Measure displacement as price travel from the body reference over 1 to 5 bars, normalized by ATR.
5. On confirmation, draw the RB zone from the wick base to the body, record the tier, and begin lifecycle tracking.
Zone lifecycle tracks four events — test (price enters the zone), hold (price exits without a body close through the far edge), break (body close through the far edge), and near miss (price approaches within a configurable ATR band without entering). All events are edge-detected to prevent inflated counts when price lingers near a zone.
📊 SIGNALS & ALERTS
• New block formation label — A / B / C tier plus wick ratio, placed with anti-collision offset.
• Test markers (T) — one per zone entry event, with cooldown to prevent visual clutter.
• Break markers (B) — placed when a zone is invalidated by a body close.
• Wick border highlight — thick colored line on the originating rejection candle.
• Alerts — configurable minimum tier (A, B, or C) fires once per bar close for each qualifying new block.
⚙️ KEY INPUTS
• Detection — Pivot Length, Min Wick-to-Body Ratio, ATR Length, Min Displacement (× ATR), Displacement Confirm Window.
• Zone Management — Max Active Zones per Side, Zone Right Extension, Near-Miss Distance, Near-Miss Cooldown, Break Requires Full Body Close.
• Visuals — Show Zones, Show Tier Labels, Highlight Rejection Wick Border, Show Test / Hold / Break Markers, Zone Fill Opacity, Label Font Size.
• Panel — Show Panel, Panel Location, Panel Font Size, Panel Theme (Dark / Light).
• Alerts — Minimum Tier for Alerts.
🧭 HOW TO USE
Start on a higher timeframe (4H or 1D) to identify macro RB zones, then drill down to execution timeframes for entries. Treat A-tier blocks as the highest-conviction zones, B-tier as situational, and C-tier as context-only. Combine with trend filters, higher-timeframe structure, and risk management — a Rejection Block is a zone of interest, not a standalone buy or sell signal. Use the panel statistics to evaluate how the selected symbol and timeframe have historically respected these zones before committing to them in live decision-making.
⚠️ LIMITATIONS & TRANSPARENCY
This indicator is a structural detector, not a trading strategy. It does not forecast price direction, generate entry or exit orders, or calculate position sizing. The Success Rate statistic reflects how often past tests on detected zones held versus failed within the visible history — it is a descriptive metric, not a performance projection. Zone detection is historical and reactive: a block only appears after the displacement bar closes, so interpretation on live-forming bars is tentative. Performance varies by symbol, timeframe, and market regime.
⚠️ RISK DISCLOSURE
Trading involves substantial risk of loss. Past behavior of any pattern does not guarantee future outcomes. Use this tool as part of a complete analytical framework that includes your own risk management, position sizing, and broader market context. Nothing in this indicator or description constitutes financial advice. Indicator
Swing Failure Pattern (SFP) Engine [AGPro Series]Swing Failure Pattern (SFP) Engine
────────────────────────────────────────────────────────────
OVERVIEW
────────────────────────────────────────────────────────────
Swing Failure Pattern (SFP) Engine detects high-probability liquidity sweep
events at prior swing highs and lows. An SFP occurs when price pierces a
recent swing level with a long wick but closes back inside the prior range,
signalling failed continuation and potential mean reversion. Each event is
scored on four components, drawn as a mid-sized support/resistance reaction
zone, and tracked through its live cycle — with panel statistics on MFE,
MAE, and hit rate. Designed for visual pattern reading and confluence;
not a buy/sell system.
────────────────────────────────────────────────────────────
UNIQUE EDGE
────────────────────────────────────────────────────────────
Most SFP indicators mark the sweep candle and stop there. This engine treats
each SFP as a living support/resistance band: the zone extends to the right
every bar and only freezes when the swept level is actually broken on close.
That preserves the SR context that traders use in real decisions, without
cluttering charts with zones that never die. A composite score (0-100),
confluence grouping of nearby events within 0.5 ATR, and live MFE/MAE
tracking in ATR units turn a common pattern into a measurable framework.
────────────────────────────────────────────────────────────
METHODOLOGY
────────────────────────────────────────────────────────────
Swing detection uses pivot highs and lows confirmed by a configurable
lookback. An SFP is confirmed on bar close when four conditions are met:
1. The bar wicks beyond a prior unswept swing high (bearish) or swing low
(bullish) within the active lookback window.
2. The close reclaims the prior range by at least the user-defined ATR
distance (default 0.25 ATR).
3. The sweep-side wick represents at least the minimum wick ratio of total
bar range (default 55 percent).
4. Bar volume exceeds its 20-period SMA by the configured multiplier
(optional, default 1.15x).
Composite score (0-100) weights wick ratio (40), reclaim distance in ATR
(30), volume confirmation (15), and swing age (15). Only events above the
minimum score threshold are drawn. Each confirmed SFP removes its swept
swing from the active array to prevent re-triggering on the same level.
Confluence grouping merges same-side events within 0.5 ATR into a single
labelled zone with an x2, x3 count.
────────────────────────────────────────────────────────────
SIGNALS & ALERTS
───────────────────────────────────────────────────────────
Visual signals on chart:
- State-coloured label at the sweep bar reading Bull SFP or Bear SFP with
the composite score (e.g., Bull SFP 74). Confluence-grouped events are
suffixed with the merge count (e.g., Bear SFP 81 x2).
- Rectangular zone spanning the swept level and the SFP close, with a
small ATR buffer. The zone extends right each bar while active and
freezes in neutral grey when the swept level breaks.
- Dotted horizontal line marking the swept swing level.
- Dashed projection line indicating the reversal direction.
Alert conditions:
- Bullish SFP: fires on the confirmation bar of a bullish event above
the score threshold.
- Bearish SFP: same, for bearish events.
- Zone Invalidation (optional): fires when an active zone's swept level
is broken on close.
────────────────────────────────────────────────────────────
KEY INPUTS
────────────────────────────────────────────────────────────
Detection:
- Swing Pivot Length - bars each side of a pivot (default 5).
- Swing Lookback - how far back active swings are tracked (default 120).
- Min Wick Ratio - minimum sweep wick as fraction of bar range (0.55).
- Min Reclaim Distance (ATR) - how far close must reclaim (0.25 ATR).
- Require Above-Average Volume and Volume Multiplier (default 1.15x).
- ATR Length (default 14).
Scoring & Filters:
- Min SFP Score (default 55 of 100).
- Max Active Zones retained on chart (default 8).
- Stats Timeout - bars after which an unresolved event is counted in
averages (default 30). Does not affect zone visibility.
Visuals:
- Zone transparency (default 80), confluence grouping distance (0.5 ATR),
label size, and toggles for zones, swing lines, and reversal projections.
Panel:
- Location (8 options), Dark/Light theme, text size.
Alerts:
- Independent toggles for bullish, bearish, and invalidation alerts.
────────────────────────────────────────────────────────────
HOW TO USE
────────────────────────────────────────────────────────────
Apply the indicator to any chart and timeframe. Higher timeframes (1h and
above) produce cleaner swings; lower timeframes require a higher Min Wick
Ratio and Min Score to filter noise.
Read SFPs as liquidity sweep events, not standalone entries. A bullish SFP
below a prior swing low indicates that sellers failed to extend the move —
often a location where larger participants accumulate. The score reflects
sweep quality; higher scores (70+) generally correspond to cleaner
rejections. Use the zone as a support/resistance reference until it is
invalidated.
Panel statistics describe the observed sample on the loaded chart, not a
backtested system. MFE Hit Rate is the percent of resolved zones that
reached 1 ATR in the SFP direction before the swept level broke — it is a
quality reference, not a win rate for any trading strategy.
────────────────────────────────────────────────────────────
LIMITATIONS & TRANSPARENCY
────────────────────────────────────────────────────────────
- Signals confirm on bar close; intrabar conditions may change until close.
- Pivot detection introduces a natural bars-of-right-context lag equal to
the Pivot Length. This is intrinsic to any pivot-based approach.
- Panel statistics reflect events visible on the current chart load and
will vary with timeframe, symbol, and bar range.
- MFE Hit Rate is not a profit expectation. It measures whether price
moved 1 ATR in the SFP direction before the swept level broke.
- Volume confirmation uses chart volume and may behave differently on
symbols with inconsistent volume data.
- The indicator uses standard Pine Script drawing objects. Chart reload
may reset ephemeral visual states of resolved zones.
────────────────────────────────────────────────────────────
RISK DISCLOSURE
────────────────────────────────────────────────────────────
This indicator is a visualisation and analysis tool. It is not a trading
system, not financial advice, and not a signal service. It does not
predict future price movement. All trading decisions carry risk of loss
and are the sole responsibility of the user. Historical pattern behaviour
does not guarantee future results. Test thoroughly on your instruments
and timeframes before making any decisions. Indicator
AG Pro Pin Bar Quality Filter [AGPro Series]AG Pro Pin Bar Quality Filter
Overview / What it does
AG Pro Pin Bar Quality Filter is a price-action overlay built to detect pin bar candles and then separate higher-quality rejection candles from weaker or noisier ones.
The script does not treat every long-wick candle as equally meaningful. Instead, it evaluates the internal candle structure first, then applies a compact quality framework around volume, recent momentum, and local support/resistance context. The result is a filtered pin bar workflow designed for traders who want cleaner chart annotation rather than a raw pattern dump.
This tool focuses on one specific job: identifying rejection candles with a measurable structure and presenting them with a readable quality label directly on the chart. It is intended to help users inspect potential reaction points, not to replace broader market context or execution rules.
The visual design is intentionally simple at the core: pin bar body highlighting, wick emphasis, directional markers, and compact quality labels. This makes the script suitable for traders who want candle-based context without converting the chart into a full market-structure dashboard.
Unique Edge
The distinctive feature of this script is that it does not stop at pattern detection.
A standard pin bar script often marks candles only because they have a long wick. This script goes further by checking whether the wick is large enough relative to the body, whether the body itself is small enough relative to the full candle range, and whether one wick clearly dominates the other. That combination helps reduce ambiguous candles that visually resemble pin bars but do not express clean rejection.
After the structural test, the script applies a three-part quality model:
- volume confirmation
- momentum context
- support/resistance proximity
This creates a practical quality hierarchy rather than a binary pattern label. In other words, the script is not only asking “Is this a pin bar?” but also “How much contextual support does this pin bar have?”
An optional piercing check is also available for users who want stricter validation. This adds another layer of selectivity by requiring the candle body to show stronger positional behavior relative to the prior bar.
Methodology
The script starts by measuring the current candle:
- candle body size
- full candle range
- upper wick length
- lower wick length
- dominant wick versus body ratio
A raw pin bar candidate requires:
- a minimum wick/body ratio
- a maximum body percentage of full range
- directional wick dominance
This helps define whether the candle is a legitimate bullish or bearish rejection structure.
Bullish pin logic is based on lower-wick dominance.
Bearish pin logic is based on upper-wick dominance.
Once a raw pin bar is detected, the script evaluates three contextual filters.
1) Volume filter
The current volume can be compared against a moving average of volume. This helps identify candles that form with relatively stronger participation.
2) Momentum confirmation
The script can check whether recent candles were moving in the opposite direction of the current pin bar. For example, a bullish pin bar becomes more meaningful when it forms after short-term downward pressure, while a bearish pin bar becomes more meaningful after short-term upward pressure.
3) Support / resistance proximity
The script tracks pivot-based reference levels and checks whether the pin bar forms close to a recent local support or resistance area, using an ATR-based distance threshold.
Each passed filter contributes to the final quality score. This produces a compact tiered output instead of a single undifferentiated signal stream.
Signals & Alerts
The script can identify:
- bullish pin bars
- bearish pin bars
- higher-quality pin bars based on the selected minimum score
Visual elements may include:
- body highlighting on detected pin bars
- wick emphasis
- directional arrow markers
- quality labels with contextual details
- an information panel summarizing the active state
The quality label can display the signal tier and relevant confirmations such as:
- wick/body ratio
- volume confirmation
- momentum confirmation
- support/resistance proximity
Alert conditions are available for:
- bullish pin bars
- bearish pin bars
- prime-quality pin bars
- any valid pin bar that meets the selected score threshold
This allows users to align alerts with their own strictness settings rather than monitoring every possible candle manually.
Key Inputs
Important user controls include:
- minimum wick/body ratio
- maximum body percentage of full range
- wick dominance threshold
- optional piercing requirement
- volume filter enable/disable
- momentum filter enable/disable
- support/resistance filter enable/disable
- minimum quality score
- label size
- panel display
- maximum number of displayed signals
These settings make the script adaptable across different instruments and chart styles. Users who prefer a broader scan can lower the strictness, while users who want fewer but cleaner signals can raise the thresholds.
Limitations & Transparency
This script is a rule-based candle-quality filter. It is not a market prediction engine, and it does not attempt to classify broader trend structure, liquidity behavior, or macro regime by itself.
A pin bar can still fail even when all filters pass. A visually strong rejection candle is not automatically a durable reversal. Context such as higher-timeframe structure, trend state, volatility regime, session behavior, and instrument-specific character still matters.
Support and resistance detection in this script is pivot-based and proximity-based. It is designed as a practical contextual filter, not as a complete structural mapping model.
Volume behavior also varies by asset and market type. On some instruments, especially where centralized volume data is limited or interpreted differently, the volume filter should be treated as a supplementary input rather than a universal truth test.
The momentum check is intentionally compact and local. It is meant to improve candle context, not to replace broader directional analysis.
For these reasons, the script is best used as a chart-reading assistant within a larger process, not as a standalone decision framework.
Risk Disclosure
This script is provided for technical analysis and chart annotation purposes only.
It highlights selected pin bar conditions based on user-defined structural and contextual rules. It does not provide financial advice, investment advice, or guaranteed trade outcomes. Markets can remain irrational, trend continuation can invalidate rejection candles, and false positives can occur in all timeframes and asset classes.
Users should validate the script on their own instruments, timeframes, and risk models before relying on it in live conditions. Position sizing, stop placement, execution discipline, and overall trade management remain the responsibility of the user.
In summary, AG Pro Pin Bar Quality Filter is designed to help traders study rejection candles with more structure, more selectivity, and cleaner on-chart presentation than a basic pin bar marker, while remaining transparent about what the script does and does not do.
Indicator
AG Pro Inducement & Trap Quality [AGPro Series]AG Pro Inducement & Trap Quality
OVERVIEW / WHAT IT DOES
AG Pro Inducement & Trap Quality is an overlay tool built to map short-lived trap behavior around smaller inducement levels rather than broad market structure alone. The script focuses on moments where price appears to invite participation through a nearby internal level, briefly pushes beyond that level, and then reclaims it quickly enough to suggest failed continuation pressure.
In practical terms, this tool is designed to highlight a very specific type of behavior: local liquidity engineering around minor swing references. Instead of treating every sweep as equally meaningful, it evaluates whether the move shows the characteristics of a more deliberate trap sequence. This helps separate routine noise from cleaner rejection events that may deserve closer attention.
The script identifies compact inducement references, monitors whether those levels are exceeded, and then evaluates the quality of the reclaim using a rules-based scoring model. The output is intentionally visual and compact: trap labels, score readouts, engineered-liquidity context, and a lightweight status panel that keeps the chart readable while still surfacing the most important state information.
This is not a broad “smart money everything” overlay, and it is not a general market-structure engine. Its role is narrower and more specific: to help users study micro trap behavior around inducement levels with a structured, visual framework.
UNIQUE EDGE
Many trap-style overlays simply mark local sweeps or label wick rejections without distinguishing between low-quality noise and more organized rejection behavior. This script takes a narrower path.
Its core distinction is that it is built around inducement-first logic. The process begins with smaller internal swing references that may function as local liquidity magnets. From there, the script evaluates whether price briefly runs that level and reclaims it with enough quality to qualify as a more meaningful trap event.
This makes the script materially different from tools that primarily map:
- full structure breaks,
- broad liquidity sweeps across larger swing highs and lows,
- order blocks or fair value gaps,
- or generic reversal candles.
The objective here is not to classify the whole market. The objective is to organize one specific event class: short-lived inducement failure and trap quality around internal levels.
METHODOLOGY
1) Inducement level detection
The script scans for smaller swing references that can function as local inducement levels. These are not intended to replace major support or resistance logic. They serve as nearby internal references around which short-term trap behavior may form.
2) Sweep and reclaim logic
After an inducement level is identified, the script monitors whether price briefly trades beyond that level. A trap candidate is only considered when the move fails to sustain beyond the level and price reclaims the reference within a limited confirmation window.
3) Quality model
Each trap candidate is scored using a rules-based quality framework. The score is not arbitrary. It is derived from components such as:
- reclaim speed,
- relative volume behavior,
- wick proportion,
- and overshoot control.
The purpose of the score is not prediction. It is prioritization. A higher score suggests that the rejection characteristics were cleaner according to the script’s internal rules.
4) Engineered liquidity context
When inducement logic becomes active, the script can visualize engineered-liquidity context so users can see where price is interacting with a recently relevant internal level. This is meant to improve readability and sequencing, not to imply certainty.
5) Visual decluttering and presentation controls
To keep the overlay usable, the script includes compact labeling, importance filtering, label spacing controls, and a small status panel. These features are presentation tools designed to reduce clutter without changing the underlying trap logic.
SIGNALS & ALERTS
The script can visualize bull and bear trap events after inducement-level interaction and reclaim confirmation.
Typical readouts include:
- TRAP labels,
- quality score values,
- inducement / engineered-liquidity context,
- and panel status information such as recent trap state and current watch state.
Alert conditions are designed around deterministic script events rather than discretionary interpretation. As with any alert-based study, users should confirm how they want to use those events inside their own workflow before relying on them in live conditions.
KEY INPUTS
Important controls typically include:
- inducement swing sensitivity,
- confirmation window / reclaim timing,
- volume and wick weighting inputs,
- overshoot tolerance,
- compact label display,
- importance filtering,
- panel visibility and position,
- and vertical label offset controls.
These settings allow the user to decide whether they want broader coverage or a stricter, more selective readout.
HOW THIS DIFFERS FROM OTHER AG PRO TOOLS
This script is intentionally specialized.
It is not a BOS / CHoCH engine and does not attempt to label full structural transitions.
It is not an order block tool and does not frame the chart through block logic.
It is not a fair value gap map and does not organize imbalance zones as its primary lens.
It is not a broad liquidity sweep tool built around larger external swing raids.
Instead, this script concentrates on micro inducement behavior: smaller internal references, brief level violations, fast reclaim structure, and the relative quality of the resulting trap.
That narrower scope is the point. The script is designed to help users study one recurring behavior class in a more disciplined and readable way.
LIMITATIONS & TRANSPARENCY
This script is a visual and analytical aid. It does not know intent, news context, execution conditions, or participant positioning.
A trap label does not guarantee reversal.
A higher quality score does not guarantee continuation.
A low-quality score does not mean the area is irrelevant.
Internal inducement levels can vary in significance depending on volatility regime, instrument behavior, and timeframe selection.
Like any rules-based overlay, this script is sensitive to parameter choices. More permissive settings may surface more events but also more noise. Stricter settings may improve selectivity while naturally reducing signal frequency.
Users should also understand that inducement and trap concepts are interpretive by nature. This script translates those ideas into a deterministic ruleset for chart study. That conversion is useful, but it is still a model.
RISK DISCLOSURE
This script is for chart analysis and educational use. It is not financial advice, not a trade signal service, and not a promise of outcome.
All trading and investing involve risk. Market conditions can change quickly, and no indicator or overlay can eliminate uncertainty. Users should evaluate signals in context, apply their own risk management, and avoid treating any single chart tool as a complete decision system.
WHAT THIS SCRIPT IS NOT
To make the scope clear, this script is not:
- a guaranteed reversal detector,
- a one-click trade system,
- a full market-structure replacement,
- or a standalone execution model.
It is a focused overlay for studying inducement-driven trap behavior with a cleaner visual framework.
NOTES
Best use cases typically come from combining this script with context that the user already trusts, such as trend structure, higher-timeframe location, or broader execution rules. The tool is intended to improve organization and observation around inducement and trap sequences, not to replace judgment.
If you prefer a cleaner chart, use the compact display and importance filter settings. If you prefer a more exploratory workflow, relax the filter and study how the scoring reacts across different conditions.
Indicator
AG Pro Liquidity Sweep Quality [AGPro Series]AG Pro Liquidity Sweep Quality
OVERVIEW / WHAT IT DOES
AG Pro Liquidity Sweep Quality is a pivot-based overlay designed to map bullish and bearish liquidity sweep events around confirmed swing highs and swing lows. Instead of only flagging whether price traded beyond a prior level, the script evaluates whether that move behaved like a meaningful rejection or a weak sweep. The result is a structured liquidity sweep indicator that focuses on sweep quality, not only sweep detection.
In practical terms, the script looks for price moving above a prior swing high or below a prior swing low and then closing back through that level on the same bar or, if enabled, on the next bar. This behavior is commonly associated with stop hunts, failed breakout attempts, failed breakdown attempts, and short-term rejection events around visible liquidity. The script then ranks the event using a multi-factor quality model so the chart does not treat every sweep as equally important.
This makes the tool relevant for traders studying liquidity sweep behavior, smart money concepts, ICT-style chart reading, rejection anatomy, wick-driven reversals, sweep confirmation, and swing-based context. It is not built to predict direction on its own. It is built to organize sweep events so users can distinguish weaker noise from stronger rejection structures.
UNIQUE EDGE
The main objective of this script is not to publish another generic liquidity grab marker. Its edge comes from the fact that it scores each confirmed sweep using a quality framework. That framework combines how deeply price traded through the level, how decisively it closed back beyond the level, the wick-to-body relationship of the sweep bar, relative volume behavior, swing freshness, nearby swing crowding, and optional higher-timeframe bias alignment.
This matters because many sweep-style tools stop at a binary answer:
sweep happened / sweep did not happen.
This script asks a more useful follow-up question:
how good was that sweep?
That distinction is important on real charts. Some liquidity sweeps show strong rejection, clean close-back behavior, fresh structure, and supportive context. Others are simply noisy level violations inside a crowded area. By assigning a quality score, the script is designed to help users compare sweep events with more nuance.
Another distinguishing feature is that the script separates watch conditions from qualified conditions. A level can first be challenged, then either reclaim cleanly or fail to reclaim. This helps reduce the tendency to treat every level breach as a reversal event.
METHODOLOGY
1) SWING DETECTION
The script uses confirmed pivot highs and confirmed pivot lows as its structural reference points. These pivots are not assumed in advance. They become available only after the user-defined Pivot Strength confirmation process is complete.
2) SWEEP TRIGGER
A bearish sweep scenario begins when price trades above a stored swing high.
A bullish sweep scenario begins when price trades below a stored swing low.
3) QUALIFICATION
A sweep is considered qualified when price closes back through the swept level. By default, the script can evaluate same-bar reclaim behavior and, optionally, next-bar reclaim behavior.
4) QUALITY MODEL
Each qualified sweep is scored using multiple factors, including:
- penetration relative to ATR
- rejection distance back through the level
- wick-to-body ratio
- relative volume versus a recent baseline
- freshness of the swing level
- nearby level crowding penalty
- optional higher-timeframe trend alignment bonus
The final output is normalized into a simple 1 to 10 quality score so chart reading remains fast and visually clean.
5) VISUAL MAPPING
Qualified sweeps can display:
- direction label
- quality score label
- sweep zone box
- dashed memory line at the swept level
- optional chart background tint
- compact minor markers for lower-priority qualified sweeps
This allows the chart to remain informative without forcing every event to carry the same visual weight.
SIGNALS & ALERTS
The script includes deterministic alert conditions for:
- Bull Sweep Trigger
- Bear Sweep Trigger
- Bull Sweep Qualified
- Bear Sweep Qualified
- High Quality Bull Sweep
- High Quality Bear Sweep
A trigger means price challenged the stored liquidity level.
A qualified sweep means price also reclaimed the level according to the script rules.
A high-quality sweep means the final score exceeded the selected threshold.
These states are intended to help users organize workflow and review price behavior. They are not instructions to buy or sell.
KEY INPUTS
Pivot Strength
Controls how swings are confirmed. Higher values generally reduce noise but also make structural detection slower and more selective.
Max Swing Age
Limits how long old swing levels remain eligible. This helps keep the liquidity map focused on fresher structure.
Allow Next-Bar Reclaim
Allows the script to qualify a sweep when the reclaim happens on the next bar instead of only the sweep bar itself.
ATR Length
Used in the quality engine to normalize sweep depth and rejection distance.
Relative Volume Length
Defines the baseline used for volume comparison.
Crowding Width (ATR)
Helps penalize sweeps occurring in dense structural clusters, where nearby levels can reduce interpretive clarity.
Higher Timeframe and HTF EMA Length
Used to build an optional bias filter so aligned sweeps can receive a context bonus.
Min Score For Full Labels
Lets users keep high-information labels on stronger sweeps while weaker qualified sweeps can remain as compact markers.
Same-Side Full Label Cooldown
Reduces repeated full labels in the same direction over a short span, improving chart readability.
LIMITATIONS & TRANSPARENCY
This script is a chart-organization tool, not a stand-alone decision engine.
Because the logic is pivot-based, swing levels are only confirmed after the chosen Pivot Strength delay. That means the structural reference points are confirmed swings, not instantly-known highs or lows.
A liquidity sweep on one market, timeframe, or volatility regime may not behave the same way on another. The scoring framework is designed to rank events relative to the script's own rules, not to certify that a sweep will lead to reversal or continuation.
Higher relative volume may improve context, but volume confirmation does not guarantee outcome quality.
The higher-timeframe alignment feature is a contextual filter. It should not be interpreted as a macro trend forecast.
Like any visual overlay, this tool can produce signals in choppy or highly reactive conditions that later prove less useful than they first appeared. Parameter selection matters.
WHAT THIS SCRIPT IS NOT
This script is not a promise of reversal.
It is not a complete smart money framework.
It is not a substitute for execution planning, risk management, or broader market context.
It does not claim to detect institutional intent.
It does not classify every level break as tradable.
Instead, it focuses on one specific chart behavior:
sweep-and-reclaim quality around confirmed swing liquidity.
RISK DISCLOSURE
This indicator is for analytical and educational use only. It does not provide financial advice, investment advice, or guaranteed trade outcomes. Markets can remain irrational, trend aggressively, or ignore local sweep signals for extended periods. Users should validate any chart workflow with their own process, risk controls, and market understanding before acting on any signal or alert.
If you use this tool, it is generally best treated as a structural filter inside a broader workflow rather than as a stand-alone trigger.
AGPro Series note:
This publication is designed to emphasize structured chart reading, deterministic event definitions, and transparent methodology over promotional claims or outcome promises.
Indicator
