Strong Supertrend Engine | ProjectSyndicateStrong Supertrend Engine maps the session around a Supertrend trend-stop and power-ranks the with-trend zones where price is most likely to continue, not reverse. Every session it reads one decision from the prior completed session's daily Supertrend — is the session open above the Supertrend a green, buy-only regime or below it a red, sell-only regime — and then projects an ATR-scaled ladder of reaction zones around the session open. On top of the zones it draws the session's best continuation setups as zone-to-zone arrows: in a green regime it points up from a pullback zone to a target zone; in a red regime it points down from a rally zone to a target below. The whole tool runs on one idea: trade dips with the trend, not against it — buy dips into support while the Supertrend is green, sell rips into resistance while it is red, and favor the stronger-graded zones.
This is the inverse of a fade tool. Across a broad multi-instrument study FX majors and crosses, gold and an index, fading stretched levels back to balance behaved like a coin flip, while with-trend pullback entries were the side that carried a modest, repeatable edge. Strong Supertrend Engine is built around that side.
🟢🔴 Summary how to trade this more details below, read entire guide. Best trade setups with this system is to buy dips, arrows highlight best entry zones / prices when price is trading above green ST zones. Likewise, sell rips, arrows highlight best entry zones on sell side / when price is trading below red ST zones. Detailed overview below. Run on lower TFs for best entries, i.e.
M5 M10 M15 M30.
🟢🔴 The Supertrend Regime the master switch — The session open versus the daily Supertrend sets the only bias that matters. Open above the Supertrend ⇒ the core stop band renders green and the engine shows BUY-ONLY setups buy the dips. Open below ⇒ the band renders red and the engine shows SELL-ONLY setups sell the rips. A close back through the Supertrend flips the regime and recolors everything. You never fight the band: green means look for longs, red means look for shorts.
🧲 The Session Basis auction center — Each session's zone ladder is anchored to the session open by default Prior HL2, OHLC4 or Close optional. Price spends the day auctioning around this basis, so the inner zones sit exactly where price actually trades and the outer zones mark a genuine stretch. The basis is also the natural first reference a with-trend pullback works back through.
📊 ATR-Scaled Zone Ladder — Five escalating tiers are projected above and below the basis at calibrated ATR offsets 0.12, 0.25, 0.40, 0.55, 0.75 × ATR by default, drawn as clean equal-height shaded bands. The spacing is deliberately pulled in to where price genuinely travels intraday a typical session covers roughly half an ATR from the open, so the inner tiers get tagged often and the outer tiers mark the real extremes. A global width multiplier and per-tier offsets let you reshape the geometry for any instrument or timeframe.
ES
🟩 The Core Supertrend Stop Band — The actual daily Supertrend value is drawn as a bold band — green support in an uptrend, red resistance in a downtrend. It is the trend's hard line: the trade thesis holds while price stays on the correct side of it, and a close through it is the regime flip and the natural hard stop.
🏷️ 0–10 Strength Grade & In-Zone Labels — Every zone carries a live 0–10 grade inside the band — the tier name with a ▲ / ▼ side marker, stars, the X.X/10 score and a tier word FORMING → WEAK → MODERATE → STRONG → ELITE. The grade blends tier extremity, volatility context, trend regime and with-trend alignment so the with-trend side is favored. Read it as a descriptive conviction ranking for which zone deserves attention — it is not a backtested win-rate.
WTI
🏹 Continuation Setup Arrows the signature feature — For the last N sessions, the engine selects the best 2–4 with-trend setups per session and draws each as a zone-to-zone arrow that spans several zones 3 by default, so each arrow shows a meaningful directional trade, not a one-tier hop. In a green regime arrows run up from a pullback/dip zone, through the open, to a target zone above; in a red regime they run down from a rally/rip zone to a target below. Each arrow is labeled with the entry→target zones, the R multiple of the move, and a star grade. Setups are ranked by regime strength + momentum alignment + clean pullback depth, so the strongest, best-located trades surface first.
📈 Laguerre PPO Momentum Confluence — A daily, non-repainting Laguerre PPO reads whether momentum agrees with the regime. It boosts the score of aligned setups and can be set as a hard filter so only momentum-confirmed setups print. Up-momentum strengthens buy-dip setups in a green regime; down-momentum strengthens sell-rip setups in a red regime.
BTC
⚙️ Uniform ATR Zone Height — Every tier shares one identical ATR-based thickness, centered on its level, for a clean, consistent look on any symbol or timeframe.
🎨 Regime & Strength Shading — Stronger zones render more opaque, weaker ones stay faint, and counter-trend zones are dimmed so the actionable with-trend side pops. Resistance tiers shade red, support tiers green, the core stop green/red by regime, and the arrows green for buys, red for sells. Arrow labels use black text for crisp readability on the colored tags.
🔒 Non-Repainting — Each session's regime, basis, zones, scores and arrows lock in from the completed prior session read with a confirmed offset and never change intraday. Zones span exactly one session and close cleanly at the boundary — no bleed into the next session. The last N sessions are kept default 10 and older ones are removed automatically.
Silver
📋 Live Dashboard — A compact panel reports the current Regime BUY-ONLY / SELL-ONLY, Momentum up / down, the number of setups this session, the Trend, the Supertrend stop price, ATR, the distance from price to the stop in ATR, and the trend age in sessions.
🔔 Native Alerts — Dedicated Buy Continuation Setups and Sell Continuation Setups alerts the moment a new session's setups print, plus zone-touch, strong-zone, extreme-tier, core-stop-tag and Supertrend-flip alerts.
🔧 Fully Customizable — Supertrend ATR length and factor, basis source, the five tier offsets and global width multiplier, zone thickness, the four scoring weights and their lookbacks, the score filter, the Laguerre fast/slow gammas and momentum-filter toggle, arrow count 2–4, arrow span zones, spacing, width, colors and labels, dashboard position/size, transparency and shading — all adjustable.
DAX
🎯 Why this is different — Most band tools draw static envelopes and leave you guessing which edge matters, and most "tops & bottoms" tools quietly ask you to fade strong moves. Strong Supertrend Engine does the opposite: it frames the session as a trend defined by the Supertrend, refuses to show counter-trend trades, and hands you the session's best with-trend continuation setups as labeled arrows from zone to zone. You read the regime green/red, the destination the arrow's target zone, and the conviction the score at a glance.
🚀 Apply to Gold XAUUSD, Silver, Forex, Crypto and Indices on any intraday timeframe.
🎯 How To Trade It — Two Approaches
Everything hinges on the regime: green Supertrend = buy dips only, red Supertrend = sell rips only. Never fade the band. Use the stronger-graded zones and the printed arrows to pick the best-located entry.
◾ 1 BUY DIPS in a Green Supertrend Regime — open above the green ST
This is the engine's core long thesis. The session open is above the green Supertrend, so the regime is BUY-ONLY and buy arrows point up from the dip zones toward higher targets.
▪️ Setup: wait for price to pull back / dip into a support zone below the open — prefer the stronger-graded zones higher score / more stars, ideally one a buy arrow points up out of, with Laguerre momentum up.
▪️ Entry: long on the dip into the zone, in the direction of the green regime the with-trend bounce.
▪️ Stop: below the entry zone — one tier deeper — with the green core Supertrend stop as the hard invalidation. A decisive close below the green ST flips the regime; the long thesis is then wrong, stand aside.
▪️ Targets: step up zone to zone toward the arrow's target each arrow spans ~3 zones — through the open into the upper tiers, banking partials at each tier and trailing with the trend.
⚖️ The cleanest version: price opens above a rising green Supertrend, dips into a STRONG/ELITE support tier, holds, and rotates back up through the open into the upper tiers — exactly the leg the arrow frames. The deeper-but-still-graded dips offer the better risk; the shallow ones trigger most often.
◾ 2 SELL RIPS in a Red Supertrend Regime — open below the red ST
The mirror image. The session open is below the red Supertrend, so the regime is SELL-ONLY and sell arrows point down from the rally zones toward lower targets.
▪️ Setup: wait for price to rally / rip into a resistance zone above the open — prefer the stronger-graded red zones higher score / more stars, ideally one a sell arrow points down out of, with Laguerre momentum down.
▪️ Entry: short on the rip into the zone, in the direction of the red regime.
▪️ Stop: above the entry zone — one tier higher — with the red core Supertrend stop as the hard invalidation. A decisive close above the red ST flips the regime; stand aside.
▪️ Targets: step down zone to zone toward the arrow's target through the open into the lower tiers, banking partials and trailing the move.
Rule of thumb: ⭐ Green Supertrend, open above it → buy dips into the stronger support zones, target the arrow's zones up. ⭐ Red Supertrend, open below it → sell rips into the stronger resistance zones, target the arrow's zones down. ⭐ When price closes through the Supertrend, the regime flips — wait for the new side before taking the next trade.
EURUSD
⚠️ IMPORTANT NOTICE: Strong Supertrend Engine frames a Supertrend-defined trend and ranks the best with-trend continuation setups. The 0–10 score is a descriptive conviction ranking, not a backtested win-rate, and the with-trend edge measured in study was modest — these zones and arrows are decision support, not a standalone trade trigger. Always combine them with your own strategy, price-action confirmation and risk management. Past behavior does not guarantee future results. Indicator
Strong Reaction Zones | ProjectSyndicateStrong Reaction Zones maps how far price has stretched from session balance and power-ranks the zones where it is most likely to snap back. Every session it anchors a Balance Zone — the auction center the day trades around — and projects escalating reaction tiers above and below it: Low, Normal, High, Very High and Extreme, drawn as clean equal-height shaded zones. Each tier is scored 0–10 for reaction strength, so you instantly see which stretch is most likely to reject price back toward balance and which is just trend doing its job. The whole tool runs on one idea from auction theory: the further price travels from the Balance Zone, the heavier the pull back to it — and the Extreme tier is where that reversion tends to be sharpest.
🎯 Reaction-Strength Power-Ranking (0–10) — every tier earns a live grade from four principled factors, each with a fixed directional sign: Tier Extremity (distance from the Balance Zone — the primary driver, since outer stretches mean-revert harder), Volatility Context (a compressed session vs its ADR baseline makes the outer tiers genuine extremes; an expanding session de-rates them), Range Regime (an efficiency-ratio read — choppy / mean-reverting conditions favor reactions, strong trends suppress them), and Trend Alignment (with-trend zones — support in an uptrend, resistance in a downtrend — react more reliably). All four weights and their lookbacks are adjustable. The score is a descriptive auction-logic framework for ranking which zone deserves attention — not a backtested signal.
🏷️ In-Zone Strength Labels — each zone carries its grade inside the band: the tier name with a ▲ / ▼ side marker, stars, the X.X/10 score, and a tier word (FORMING → WEAK → MODERATE → STRONG → ELITE). Quality reads instantly without a separate panel.
🧲 The Balance Zone (auction center) — the gravitational center each session auctions around, plotted from the prior session's OHLC4 by default (HLC3, Mid, or a non-repainting Daily SMA optional). It is the magnet every reaction targets — the destination of a reversion from any extreme, and the primary take-profit reference for a fade.
📊 Five Escalating Reaction Tiers — Low, Normal, High, Very High and Extreme, mirrored above (resistance) and below (support) the Balance Zone. Spacing is ADR-scaled so the ladder adapts to each instrument's volatility, with a global width multiplier and per-tier offsets if you want to reshape the geometry. The Extreme tier marks the outer edge of the session's expected auction — the highest-conviction fade-and-revert zone.
⚙️ Uniform ATR Zone Height — every tier and the Balance Zone share one identical ADR-based thickness, centered on its level, for a clean, consistent look on any symbol or timeframe.
🎨 Strength-Shaded Fill — stronger zones render more opaque while weak ones stay faint, so the chart shows which extremes carry weight before you read a number. Resistance tiers shade green, support tiers maroon, and the Balance Zone a neutral gray.
🧹 Score Filter & Tier Toggles — hide every zone below a score threshold, or switch individual tiers on and off, so the chart only carries the levels that earned their place.
🔒 Non-Repainting — each session's Balance Zone, tiers and scores lock in from the completed prior session and never change intraday. Zones span exactly one session and close cleanly at the day boundary — no bleed into the next session. The last N sessions are kept (default 10) and older ones are removed automatically.
🔔 Native Alerts — a touch alert for any reaction zone, a touch alert for a STRONG zone (≥ your threshold, default 7/10), and a dedicated alert the moment price reaches an EXTREME tier — the highest-conviction reversion trigger.
🔧 Fully Customizable — Balance-Zone source, ADR length, global width multiplier and per-tier offsets, zone thickness, the four scoring weights and their regime / volatility lookbacks, the score filter, label text / size / visibility, colors, transparency and the strength-opacity span — all adjustable.
🎯 Why this is different — most band and envelope tools draw static lines and leave you guessing which edge matters. Strong Reaction Zones frames the session as an auction around a Balance center and tells you, tier by tier, how strong the snap-back from each stretch should be — so an ELITE Extreme zone is a fade-to-balance trade, while a de-rated zone in a trending regime is a warning that price may keep running. You read the destination (balance) and the conviction (the score) at a glance.
🚀 Apply to Gold (XAUUSD), Silver, Forex, Crypto and Indices on any intraday timeframe.
🎯 How To Trade It — Two Approaches
Everything hinges on the question the score answers: is this stretch likely to revert to balance, or keep extending? High-rated outer zones in a ranging / compressed regime favor reversion; de-rated zones in a trending / expanding regime favor continuation.
◾ 1) Reversion from Extreme → Balance Zone (fade the stretch) — use on STRONG / ELITE outer tiers (≥7), especially High / Very High / Extreme
This is the indicator's core thesis. When price pushes out to a High, Very High or Extreme reaction zone rated STRONG or ELITE — most reliable when the Range Regime read is low (choppy) and Volatility Context is high (compressed) — the auction is statistically over-extended and the pull is back toward the Balance Zone.
▪️ Wait for price to tag the rated outer zone and print rejection — a wick or reversal candle back inside the tier rather than a decisive close beyond it.
▪️ Entry: on the reversal back inside the zone, facing the Balance Zone.
▪️ Stop: just beyond the next tier out (fading Very High → stop beyond Extreme). If price pushes through the outer tier and holds, the over-extension thesis is wrong — stand aside or flip to Approach 2.
▪️ Targets: step in toward balance — the next inner tier first, then the Balance Zone as the primary magnet, and the opposite-side inner tier if momentum carries through.
⚖️ The cleanest version of the trade: price spikes into the Extreme zone, fails to hold, and rotates back down through Very High → High → Normal → into the Balance Zone. That full reversion from the extreme to balance is the move this tool is built to frame. Use the Touch EXTREME / Touch STRONG alerts to catch the stretch the moment it prints.
◾ 2) Expansion / Trend Break → Trade With the Move — use when the outer tiers are de-rated or the regime is trending
When the score de-rates the outer tiers — a high efficiency ratio (strong trend), an expanding session (Volatility Context low), or the trend side carrying lower grades against the move — reversion is the wrong bet. A clean break and hold beyond the outer tier is the auction expanding, not exhausting.
▪️ Wait for a decisive close beyond the High / Very High / Extreme tier on expansion (not a single wick), with the zone failing to reject.
▪️ Entry: in the direction of the break, on the close beyond the tier or on a retest of the broken zone.
▪️ Stop: back inside the broken tier, toward the Balance Zone.
▪️ Targets: the next session's range / measured move, trailing as the move extends. A broken upper tier often flips to support; a broken lower tier flips to resistance, and the old zone becomes the retest entry.
Rule of thumb: ⭐ STRONG / ELITE outer tier in a ranging / compressed regime → expect a reaction, fade it back to the Balance Zone. ⭐ De-rated tier on expansion or in a trend → expect follow-through, trade the break.
⚠️ IMPORTANT NOTICE: Strong Reaction Zones frames how far price has stretched from session balance and ranks where reversion is most likely. The 0–10 score is a descriptive, auction-logic framework, not a backtested signal, and it should NOT be used as a standalone trade trigger. Always combine it with your own strategy, price-action analysis and risk management to confirm setups. Past behavior does not guarantee future results. Indicator
Strong Risk Management | ProjectSyndicateStrong Risk Management turns trade planning into an institutional-grade pre-trade cockpit. Click your Entry, Stop, and three Take-Profit levels straight onto the chart and the tool instantly sizes the position, derives your leverage and margin, estimates the liquidation price, scores the setup, and stress-tests it against your prop-firm rules — all on two clean Bloomberg-amber panels. Every figure is computed live from your own inputs and the symbol's real tick size, not hard-coded, so the numbers describe the exact trade you are about to take, right now.
🎯 Click-to-Place Interactive Levels — drop Entry, Stop Loss, and TP1 / TP2 / TP3 directly on the chart and drag them whenever you want, just like native drawing tools. An anchor-time input lets you pin the setup to a specific bar, direction (Long / Short) is auto-detected from where your stop sits, and every level you place is always respected — the auto R-multiples only fill in the targets you leave blank.
🧮 Fee-Aware Position Sizing — the engine uses the classic fixed-fractional model and sizes the position so a full stop-out equals exactly the risk you defined, with entry and exit fees folded into the math. Choose your risk as a percentage of balance, a percentage of allocated trade capital, or a fixed cash amount, and read the precise contracts/size and notional position value it produces.
⚡ Three Leverage Modes + Liquidation Engine — run Isolated Capital (leverage derived from the margin you commit), Fixed Leverage (you set the multiplier), or Auto-Safe Leverage, which automatically picks the highest leverage that still keeps your liquidation price safely beyond your stop by a configurable buffer. The panel shows effective trade leverage, account leverage, maintenance margin rate and amount, the estimated liquidation price, and how many times further it sits than your stop — with a loud warning if liquidation would ever come before your stop is hit.
📊 Dual Bloomberg-Amber Panels — Panel 1 (Risk Console) lays out balance, trade capital, risk model, max loss, the full setup (entry, stop, stop distance, break-even, size, position value), the leverage and liquidation block, and the setup-quality verdict. Panel 2 (Prop Guardrails + Take-Profit Plan) handles the funded-account rule checks and the full target ladder. Position each panel independently anywhere on the chart.
🛡️ Prop-Firm Guardrails — purpose-built for funded and challenge traders. Set your account size, phase (Challenge / Verification / Funded), daily loss limit, maximum drawdown (with a trailing option), profit target, per-trade risk cap, and consistency rule, then see this trade scored against every one of them with SAFE / CAUTION / VIOLATION lights and an overall status. It also tells you how many trades like this you can take before breaching your daily and max-drawdown budgets, how much budget is left, and how many wins remain to the profit target.
🎚️ Take-Profit Ladder with FULL / SLICE — each target shows its price, R multiple, and allocation %, plus the dollars it books two ways: FULL (if you closed the whole position there) next to SLICE (what your partial allocation actually books). The plan rolls up into a Plan Profit row with blended R and ROI on margin, so partial exits never look inconsistent against a full-size stop again.
↔️ Reward : Risk Verdict — a single, color-coded 1 : x line grades the whole plan EXCELLENT / GOOD / MARGINAL / POOR, so a setup whose targets sit inside the stop distance screams at you instead of hiding inside an average. A companion "1R Value (full, net)" read exposes the fee drag by showing what one clean R is actually worth in cash after costs.
★ 0–10 Setup Quality Score — a composite grade blending reward-to-risk quality, risk-per-trade discipline, liquidation safety, and prop-rule headroom into one number and an ELITE / STRONG / FAIR / WEAK tier, for a fast go/no-go read before you commit.
🟢 Risk-Free-After-TP1 Read — shows exactly what closing your first partial locks in, and confirms that trailing your stop to break-even afterwards takes the remaining downside to near zero — the de-risking move spelled out in dollars.
🖥️ On-Chart Trade Map — the full trade is drawn as banded zones (profit, loss, a liquidation-danger band, and a runner zone beyond TP3), precise level lines for entry, stop, every target, break-even, and liquidation, and right-edge labels carrying each level's price, R multiple, and cash value at a glance.
🔴 Honest Live Trade Tracker — once price reaches your entry, the tool tracks floating P&L and then prints a clear ✓ TARGET HIT or ✘ STOPPED OUT outcome. Losers are never hidden, and same-bar ambiguity is always resolved pessimistically to the stop, so the read stays truthful.
🔔 Native Alerts — fire on entry triggered, target hit, stopped out, and any prop-firm guardrail violation, so you can wire the cockpit straight into your workflow.
🧩 Fully Customizable — choose each panel's position (Top / Middle / Bottom paired with Left / Right) and text size, pick your quote-currency symbol, set entry and exit fees, the maintenance-margin rate and liquidation safety factor, your R multiples and allocation split, auto-vs-manual targets, and toggle the chart zones, liquidation line, break-even line, and live tracker — all from the settings menu, no code editing required.
🎯 Why this is different — most position-size calculators hand you a lot size and stop there. This is a complete pre-trade cockpit: it sizes the trade, derives leverage and margin, estimates liquidation, scores the setup, grades the reward-to-risk honestly with fees included, and checks the whole thing against your funded-account rules — two panels that answer "how big, how safe, and is this even worth taking?" before you click buy or sell.
🚀 Where to use it — works on any symbol and timeframe. Built with crypto perpetuals, futures, and margin/leverage trading in mind, but equally useful for forex and stocks: plan the trade, validate the sizing and prop-rule headroom, then execute with the levels already mapped on your chart.
⚠️ Important — this is a research and decision-support tool, not a buy/sell system, and it makes no performance guarantees. Liquidation price, fees, maintenance margin, and leverage figures are simplified estimates and can differ from your specific broker or exchange — always verify against their exact contract specifications before sizing a live position. Nothing here is financial advice. Pair it with your own analysis and risk management. Indicator
Strong Squeeze Signals | ProjectSyndicateStrong Squeeze Signals catches the moment a genuine volatility coil releases — and instead of treating every flat patch as a setup, it waits for a real squeeze to fire, tags the direction from momentum, and ranks the release 0–10 with a star score. A market that has been compressing for a stretch of bars — its Bollinger Band wound tightly inside its Keltner Channel — has to actually expand back out, in the direction of momentum, before a signal arms. Every setup gets a structural stop beyond the coil that just broke and fixed R-based targets, and is tracked live on a full statistics dashboard so you can see how the logic behaves on the exact symbol and timeframe you trade.
🧠 Squeeze-Release Core — the core idea. The engine measures volatility compression directly from two bands. When a Bollinger Band contracts entirely inside a Keltner Channel, the market is coiling: range is shrinking and energy is building. A signal fires on the release — the bar where the band expands back outside the channel — and the direction is set by a linear-regression momentum oscillator that measures how far price sits from a composite centreline. Momentum above zero on the release fires a long; below zero fires a short. The longer and tighter the coil before it lets go, the more it counts. Signals are evaluated on the bar's close and are fixed once that bar closes — the release does not repaint.
📈 Coil Mapping & Tightness — while a squeeze is active, the engine continuously tracks how many bars it has been compressing, the high and low extent of the coil, and how tight it became — the Bollinger half-width as a fraction of the Keltner half-width. A long coil that wound down to a very tight ratio is a loaded spring; both the duration and the tightness feed directly into the strength score. A minimum-coil filter ignores fleeting micro-squeezes, and an optional Strict Fire setting demands a confirmed expansion on the release bar rather than just the end of the coil.
🎯 Structural Stop + R-Based Targets — the stop is placed just beyond the coil that just broke, with an ATR buffer: below the coil's low for a long, above the coil's high for a short — then capped and floored by ATR so it can never balloon into a wide stop or collapse into a meaningless one. TP1, TP2, and TP3 are set at clean R multiples and default to 0.5R / 0.75R / 1.25R — a tighter, hit-rate-leaning profile out of the box, and fully adjustable to whatever reward-to-risk you prefer. Every signal plots its complete Entry / SL / TP1 / TP2 / TP3 line set, labeled price levels, and filled TP / SL zone boxes, with a result label on exit.
🎚️ Coil-Conviction Controls — two inputs set how serious a squeeze must be before its release counts: Minimum Coil Bars To Arm how long the spring must compress and Minimum Strength the 0–10 gate. Tighten them for fewer, higher-quality fires; loosen them for more frequent signals. This is your main dial for conviction versus frequency.
🧭 HTF Trend Alignment Filter — an optional higher-timeframe EMA filter blocks counter-trend fires, keeping you on the dominant side of the market: longs only above it, shorts only below. The higher-timeframe value is read without lookahead. A signal cooldown spaces out entries so a single impulsive expansion doesn't stack multiple tickets.
⭐ 0–10 Setup-Quality Score — every release is scored and labeled with 1–5 stars and a tier FORMING → WEAK → MODERATE → STRONG → VERY STRONG → ELITE across nine squeeze-native factors: coil length stored energy, coil tightness how far the band compressed inside the channel, momentum magnitude at release, momentum acceleration in the fire direction, volume confirmation, expansion-candle body and range, band-width widening on the break, higher-timeframe alignment, and RSI agreement. Treat the score as a confluence / cleanliness read for ranking and thinning setups — it describes how textbook a squeeze release is, not a guaranteed outcome. A Minimum Strength / Only Strong gate lets you display and alert on stronger setups only, while the dashboard keeps tracking every tier in the background.
📊 Live Statistics Dashboard — a non-intrusive panel tracks, in real time on your chart: the current squeeze state coiling / fired / expanded / no squeeze, live coil-bar count, the momentum reading, current status and the active trade, the last signal with its star score, total signals, win rate, closed trades, profit factor, average R per trade, best-performing direction, long vs short win rate, current and max win/loss streaks, and a TP1 / TP2 / TP3 / SL hit breakdown. These are computed live from the signals on your current symbol and timeframe — so you can judge the settings yourself rather than trusting a number printed in a description.
🎨 Clean Themed Visuals — an institutional colour palette shades each zone by direction and score: bullish coils run a teal family that deepens as the score climbs, bearish coils a red-to-magenta-to-purple family, so quality reads at a glance. The compression zone is drawn over the bars where the coil formed and labeled with FIRE plus its star score; the TP and SL zones are harmonized to the same palette. Four lighting themes drive the lines, labels, and dashboard; an optional faint background tint marks active coils, and optional state dots can sit under the chart. A Max Zone Width control caps how far the SL / TP / Entry zones extend to the right, so long trades never stretch into oversized towers across the chart.
🔔 Detailed Alerts — fires on strong long / short squeeze releases, plus squeeze-on new coil forming, squeeze-released, partial-TP, TP3, and SL events, including direction and score, formatted for manual or automated use. The minimum-strength setting can restrict alerts to higher-conviction setups.
🔧 Fully Customizable — every component is exposed: Bollinger and Keltner lengths and multipliers, the true-range toggle, minimum coil bars and Strict Fire confirmation, the 0–10 strength gate and Only-Strong filter, ATR length, the structural-stop buffer with risk cap/floor, the three R targets, level-shelf length and Max Zone Width, the HTF alignment filter, the signal cooldown, plus the full institutional box palette, all four themes, and every label, dashboard, and zone-shading option.
🎯 Why this is different — most squeeze tools just print a histogram or drop a dot when the bands let go and leave everything after that to you. This one classifies the release direction from momentum, requires a real coil rather than a momentary flat spot measuring both how long and how tightly it compressed, demands momentum, acceleration, volume, and expansion confirmation, anchors the stop to the coil that actually broke, then layers an objective 0–10 ranking and a live, on-chart statistics panel on top — so you are tuning and judging the system on real, current data instead of a marketing figure.
🚀 Where to use it — markets that coil and expand: Forex, Gold XAUUSD, indices, and crypto, on intraday and swing timeframes M10/M15/M30/H1 and up. The ATR-based stop and R targets adapt to each asset's volatility automatically.
🎯 How to trade it
Apply it to a market that produces real volatility cycles and let the dashboard populate. Read the live win rate, profit factor, and average R for your symbol and timeframe before committing — if the logic doesn't suit that market, you'll see it.
Keep the HTF Trend Alignment filter on so you only take releases in the direction of the larger trend.
Wait for a STRONG LONG FIRE / STRONG SHORT FIRE label — it marks a confirmed coil release, with the star score and Entry, SL, and TP1/2/3 already plotted.
Manage the trade with the plotted levels: with the default sub-1R targets a common approach is to bank TP1 quickly, then trail or hold the remainder toward TP2/TP3; the structural SL defines your risk on the trade. If you prefer a higher reward-to-risk profile, widen the R targets in the inputs.
Use Minimum Coil Bars and Minimum Strength to set your style — stricter for fewer, cleaner releases; looser for more activity — and use the star score and Only-Strong gate to focus on the cleanest setups.
⚠️ Important — this is a decision-support tool, not a standalone buy/sell system, and it makes no performance guarantees. Default settings were chosen on historical data and behavior will vary by symbol, timeframe, and configuration; the dashboard's statistics are historical and descriptive, not a forecast. Note the default targets are sub-1R 0.5R / 0.75R / 1.25R: tight targets tend to raise the raw hit rate while lowering the reward-to-risk on each trade, so win rate read on its own is misleading — always weigh it together with average R and profit factor, and resize the targets to your own risk profile. Signals confirm on the closed bar, so always wait for the labeled release on a closed candle. Always combine it with your own analysis and risk management, and test it on your market before trading it live. Indicator
Strong SD Magnet | ProjectSyndicateThe Liquidity Magnet System in this script is based on the original Magnet System concept by FeelsStrategy — full credit to the original developer. It has been rebuilt from the ground up here: a stricter, smarter pull engine fused with a session-aware supply/demand framework and a facts-only dashboard with zero fabricated probabilities.
🟥🟩 IMPORTANT INFO: For best results run indicator on M5 TF so it builds HQ SD zones.
🧲 Liquidity Magnet System — the core of this tool. This is not a "point an arrow at the biggest level and slap a fake percentage on it" magnet. A pull only fires from a zone that has earned it: still valid (not broken), strong enough to matter, and already re-tested at least once. Fresh, untested zones never throw a magnet — price has to come back and respect the level first. Every pull is a high-conviction, vertical roadmap drawn inside the session, from a proven source toward where liquidity actually sits next.
🎯 Nearest-Valid-Target Pull Logic — the powerful new part. Supply pulls down to the closest qualifying demand below; demand pulls up to the closest qualifying supply above — never the flashiest far-away level just to look dramatic. The target must clear its own minimum score, must sit within an ATR-bounded reach (no promising a move the market isn't stretched for), and must be one of the levels actually displayed on your chart. No cross-session arrows, no jumping to hidden or invalidated zones. Clean, literal, tradable.
🟥🟩 Session Supply & Demand Engine. Each session builds a fresh batch of zones from confirmed swing pivots, drawn as uniform ATR-sized bands centred on the level — slick and consistent, never lopsided. Insignificant swings below your ATR floor are rejected before they become zones, and overlapping same-side zones merge into one so you get clean structure instead of stacked duplicates. Only the top-N strongest zones per side, per session, are shown across your chosen lookback.
WTI M5
⭐ 0–10 Zone Strength Score. Every zone is graded on a weighted blend of departure impulse, volume at formation, rejection-wick quality, and freshness, with optional time-decay while a level sits idle. Strong zones render sharp and opaque; weak ones fade — the fill itself doubles as a strength bar. This score is what the magnet leans on when choosing valid sources and targets.
♻️ Live Zone Lifecycle — ◆ FRESH → · TESTED → ✗ INVALID. Fresh means untouched since formation (highest interest). Tested means price has wicked in and the level is holding. Invalid means price closed (or wicked — your choice) through it, and the zone fades out, marked broken. The magnet only ever uses fresh-or-holding, valid zones as endpoints.
📊 Facts-Only Dashboard — no fabricated probabilities, anywhere. A non-intrusive top-right panel summarises the session in real numbers only. SUPPLY / DEMAND lists the session's top zones with tag, price range, 0–10 score, and live state. MAGNET PULLS gives one row per active pull: the route (e.g. ▼ S2→D1◆, source → target, ◆ if the target is still fresh), the pull strength, the target price, and the real distance from current price as a signed % and an ATR multiple. FIELD shows net pull bias (summed pull strength each side, Σ▼ vs Σ▲), the nearest target, and live counts.
UK100 M5
🧮 Honest Pull Strength (0–10), never a fake "chance". The headline magnet number is a strength index — a transparent blend of the source zone's strength and the target zone's strength. It is labelled as strength, not probability. You will never see an invented "92% chance it reaches" here; every figure on the panel is a real score, a real price, a real distance, or a real count.
🎚️ Fully Adjustable Magnet Filters. One settings group exposes the entire engine: source minimum score, required number of re-tests, target minimum score, maximum ATR reach, magnets per session, and how many recent sessions to display. Tighten the thresholds for fewer, cleaner pulls; loosen them for more activity. This is your main dial for conviction versus frequency.
🎨 Clean Themed Visuals. Uniform ATR bands, compact in-band zone labels, and a tidy top-right stats panel. Strong levels stand out by opacity, older sessions can fade, and the magnet pulls use their own clear accent colour so they never get lost in the zones.
🔔 Built-In Alerts. Fire on new supply and demand zones, on price approaching supply or demand, and specifically on price approaching a strong zone — formatted for manual or automated use, so you can be notified the moment structure forms or price reaches a level that matters.
BTCUSD M5
🔧 Fully Customizable. Every component is open: session boundary and timezone, swing sensitivity and zone spacing, overlap merging, ATR band height and minimum swing size, the four strength weights and idle decay, the complete magnet filter set, plus all label, colour, theme, and alert options.
🎯 Why this is different. Most magnet and liquidity tools chase the biggest level on the screen and dress it up with a made-up probability. This one fixes the logic first — a pull only from a strong, re-tested, valid zone, aimed at the nearest valid opposite level within reach — then reports it with an honest strength score and a panel of real, current numbers. You judge it on facts, not a marketing figure.
🚀 Where to use it. Trend- and range-rotational markets across Forex, Gold (XAUUSD), indices, and crypto, on intraday and swing timeframes (M10/M15/M30/H1 and up). Because zone height, reach, and distance are all ATR-based, the engine adapts to each asset's volatility automatically.
🧭 How to trade it. Read the dashboard first — it tells you the session's dominant supply/demand levels and whether the field is being pulled up or down. Use the magnet pulls as a directional bias and a target map: a strong re-tested supply pulling down to a fresh demand is a clean roadmap for where price is being drawn. Favour entries from valid zones in the direction of the net pull, treat the magnet's target as the logical objective, and size it against the ATR distance shown. A ◆ fresh target is the highest-quality objective; once it flips to ✗, that roadmap is spent.
⚠️ Important. This is a decision-support tool, not a standalone buy/sell system, and it makes no performance guarantees. Everything it shows is descriptive of current zone strength and real distance — the pull strength is a confluence/cleanliness read, not a forecast, and there are deliberately no fabricated probabilities. Behaviour varies by symbol, timeframe, and configuration. Always combine it with your own analysis and risk management, and test it on your market before trading it live.
NQ M5
Indicator
Strong Hurst Cycles | ProjectSyndicateHurst Cycles Pro decomposes the chart into a nest of harmonic cycles and projects when the next low of each one is due — so instead of guessing where a turn might land, you can see the cycle structure, read which cycles are lining up, and frame your analysis around the moments several of them are set to bottom together. It builds 4–8 nested cycles each one double the length of the cycle below it, following Hurst's harmonic principle, auto-sizes them to your timeframe, confirms every cycle low on a centred non-repainting window, and renders the whole structure as smooth scalloped arcs in a dedicated pane with a ranked turning-point strip beneath. A dashboard then translates every cycle into plain language — its period, how long since its last low, when its next low is projected, and whether it is currently rising or falling.
IMPORTANT NOTE: Run system on H1 H4 D1 timeframes.
🌀 NESTED HARMONIC CYCLES
4–8 cycles, each exactly double the length of the one below it (Hurst's harmonic doubling), drawn as smooth scalloped polylines. Longer cycles are given taller arcs, so amplitude scales with period the way real cyclic structure does. The base cycle either auto-scales to your timeframe — shorter on intraday, expanding on H4 / D1 — or you set it manually.
🔮 NEXT-LOW PROJECTION
Each cycle's next arc is projected forward as a dashed scallop, and the dashboard reports the projected time of every cycle's next low. The longest cycle anchors the structure; the shorter ones nest inside it.
💎 TURNING-POINT DIAMONDS
Two synchronised views of the same lows. A full-history diamond strip lives in the cycle pane — drawn with plotshape, so it covers ALL history with no 500-object limit, one row per cycle. Matching diamond stacks are pinned to the actual cycle-low candles on the price chart, stacked by cycle order. Independent size controls for each.
🥇 MAJOR SYNCHRONISED LOWS
When a chosen number of cycles bottom within tolerance of one another, the level is flagged as a MAJOR low and marked with a triangle in the pane — Hurst's synchronicity principle, where cycles tend to trough together. The alignment threshold and the confluence tolerance are both adjustable (tolerance can auto-size from the base cycle).
📊 CYCLE DASHBOARD
A pinned table grades the whole structure at a glance: for every cycle it shows the period, the last low (how long ago, in time), the next low (projected, in time), and the live phase (▲ up / ▼ down). A footer line projects the next major turn as a calendar date and time, with how many cycles are converging on it. Four corner positions.
🎯 DOMINANT-CYCLE TOOLS — VTL & FLD
Nominate a dominant cycle and the indicator overlays its classic Hurst tools onto the price chart: the VTL (Valid Trend Line) drawn through its last two lows and extended forward, and the FLD (Future Line of Demarcation), the price midline displaced forward by half the dominant cycle. Both are optional and force-overlaid onto price.
🔒 NON-REPAINTING BY CONSTRUCTION
Every trough is confirmed on a centred window — only after P/2 bars have closed on each side. A printed cycle low is locked in and never shifts as new bars arrive; only the still-forming right edge can update.
🎨 OWN PANE, LOCKED SCALE
The cycles and the diamond strip share their own pane on a single flat baseline, perfectly aligned, with the vertical scale locked so the arcs and rows don't jump around as detections land. Eight fully configurable cycle colours run short → long.
🔔 NATIVE ALERTS
Dedicated alerts for a major synchronised low forming and for the dominant cycle confirming a trough.
🔧 FULLY ADJUSTABLE
Number of cycles, auto vs manual base, arc heights and smoothness, history span and next-arc projection; diamond visibility, size and history span, plus pane row spacing and price stack spacing; confluence tolerance and the major-low alignment threshold; dominant-cycle selection and VTL / FLD toggles; dashboard position; and the full eight-colour cycle theme.
🚀 Works on gold (XAUUSD), silver, forex, crypto, stocks and indices, H1/H4/D1 TF.
────────────────────────
HOW TO USE IT — TWO WORKFLOWS
The cycles give you timing and context, not orders. Use them to decide WHEN and in WHICH direction to apply your own method.
TIME THE TURN — synchronised cycle lows
Use when several cycles are projected to bottom together.
Watch the dashboard's "Next low" column and the "Next major turn" footer for a date where multiple cycles converge.
The strongest windows are the MAJOR synchronised lows (triangle in the pane) — more aligned cycles, more weight.
Treat the projected date/time as a window to focus your analysis, not as an automatic entry.
Wait for your own price-action confirmation at the level before acting, and define risk beyond the structure that would invalidate the low.
READ THE TREND — dominant cycle, VTL & FLD
Use to judge whether a projected low is likely trend-resuming or just a counter-trend bounce.
Set the dominant cycle to the one that best fits the swings you trade.
The VTL frames the prevailing trend off the last two dominant lows; how price holds relative to it describes trend health.
The FLD acts as the dominant cycle's demarcation line; interactions with it describe momentum shifts of that cycle.
Combine the dashboard phase (▲ / ▼) with VTL / FLD context to weight the conviction of the next projected low.
Rule of thumb: many cycles bottoming together, with a fresh dominant-cycle phase, is the highest-conviction timing window. A lone short-cycle low against a falling dominant cycle is weaker context.
────────────────────────
⚠️ THIS IS NOT A SIGNAL SYSTEM. Hurst Cycles is an analytical timing-and-context tool built for advanced traders who already have a method. It projects cycle structure and probable turning windows — it does NOT generate buy / sell signals, and it makes no promise that a projected low will actually occur. Cycles drift, skip and occasionally invert in live markets, and the projection is only as good as the recent cyclic rhythm. Always combine it with your own strategy, price-action analysis and risk management to confirm setups. Past cyclic behaviour does not guarantee future results. Indicator
Strong Breakout Signals | ProjectSyndicateStrong Breakout Signals catches high-probability trend breakouts the moment a genuinely tested level gives way — and instead of treating every poke past a line as a breakout, it confirms each one with two independent engines and ranks it 0–10 with a star score. A clustered support/resistance wall that price has touched several times, or a clean break of market structure BOS / CHoCH, has to break with real momentum before a signal arms. Every setup gets a structural stop beyond the broken zone and fixed R-based targets, and is tracked live on a full statistics dashboard so you can see how the logic behaves on the exact symbol and timeframe you trade.
🧠 Dual-Engine Hybrid Breakout Core — the core idea. Two confirmation engines run in parallel. Engine A Clustered-Zone Break only fires when price breaks through a real support/resistance wall built from several pivots stacked at the same level — a level the market has actually respected, not an arbitrary line. Engine B Market-Structure Break tracks the most recent swing high/low and tags the break as BOS break of structure — a continuation or CHoCH change of character — where the break flips the prior direction. When both engines agree on the same bar, the setup earns a confluence bonus. Signals are evaluated on the bar's close and are fixed once that bar closes — historical signals do not repaint the tested-zone pivots confirm after the pivot lookback, an inherent property of pivot detection.
📈 Tested-Zone & Structure Mapping — a pivot engine continuously maps recent swing highs and lows, then groups nearby pivots into banded zones. The more times a level has been tested, and the older the wall, the more significant its break — both feed directly into the strength score. You choose how many touches a level needs to qualify and whether breaks confirm on the candle close stricter or the wick earlier.
🎯 Structural Stop + R-Based Targets — the stop is placed just beyond the broken zone with an ATR buffer the resistance that just broke becomes the new support, or vice-versa, then capped and floored so it can never balloon into a wide stop or collapse into a meaningless one. TP1, TP2, and TP3 are set at clean R multiples TP1 defaults to a full 1R — a real first target, not a clipped one. Every signal plots its complete Entry / SL / TP1 / TP2 / TP3 line set, labeled price levels, and filled green TP / red SL zone boxes, with a result label on exit.
🎚️ Zone-Conviction Controls — two inputs set how established a level must be before its break counts: Minimum Pivot Tests how many touches build the wall and Minimum Strength the 0–10 gate. Tighten them for fewer, higher-quality breakouts; loosen them for more frequent signals. This is your main dial for conviction versus frequency.
🧭 HTF Trend Alignment Filter — an optional higher-timeframe EMA filter blocks counter-trend breakouts, keeping you on the dominant side of the market longs only above it, shorts only below. The higher-timeframe value is read without lookahead. A signal cooldown spaces out entries so a single impulsive move doesn't stack multiple tickets.
⭐ 0–10 Setup-Quality Score — every breakout is scored and labeled with 1–5 stars and a tier FORMING → WEAK → MODERATE → STRONG → VERY STRONG → ELITE across zone quality number of tests, zone age, breakout-candle body, range expansion ATR, volume confirmation, momentum alignment, clean-break distance, RSI agreement, two-engine confluence, and HTF alignment. Treat the score as a confluence / cleanliness read for ranking and thinning setups — it describes how textbook a breakout is, not a guaranteed outcome. A Minimum Strength / Only Strong gate lets you display and alert on stronger setups only, while the dashboard keeps tracking every tier in the background.
📊 Live Statistics Dashboard — a non-intrusive panel tracks, in real time on your chart: current status and the active trade, the last signal with its BOS / CHoCH tag and score, total signals, win rate, closed trades, profit factor, average R per trade, best-performing direction, long vs short win rate, current and max win/loss streaks, and a TP1 / TP2 / TP3 / SL hit breakdown. These are computed live from the signals on your current symbol and timeframe — so you can judge the settings yourself rather than trusting a number printed in a description.
🎨 Clean Themed Visuals — four color themes, a breakout zone whose shading grows more opaque the stronger the score so quality reads at a glance, opaque labels anchored clear of price for unobstructed reading, and a compact level ticket that stays attached to each trade and snaps to the exit bar when it closes. A Max Zone Width control caps how far the SL / TP / Entry zones extend to the right, so long trades never stretch into oversized towers across the chart.
🔔 Detailed Alerts — fires on strong long / short breakouts, plus partial-TP, TP3, and SL events, including direction and score, formatted for manual or automated use. The minimum-strength setting can restrict alerts to higher-conviction setups.
🔧 Fully Customizable — every component is exposed: pivot period and zone-history depth, minimum pivot tests, close-vs-wick break confirmation, the two breakout engines toggle each independently, zone band width, the 0–10 strength gate and Only-Strong filter, ATR length, the structural-stop buffer with risk cap/floor, the three R targets, level-shelf length and Max Zone Width, the HTF alignment filter, the signal cooldown, plus all dashboard, label, theme, and zone-shading options.
🎯 Why this is different — most breakout tools fire the instant price pokes past a line and treat every signal the same, which is exactly how they get chewed up by fakeouts. This one requires a level the market has genuinely tested, or a real break of market structure, classifies it as BOS or CHoCH, demands momentum / range / volume confirmation, anchors the stop to the structure that actually broke, then layers an objective 0–10 ranking and a live, on-chart statistics panel on top — so you are tuning and judging the system on real, current data instead of a marketing figure.
🚀 Where to use it — momentum and trend-developing markets across Forex, Gold XAUUSD, indices, and crypto, on intraday and swing timeframes M10/M15/M30/H1 and up. The ATR-based stop and R targets adapt to each asset's volatility automatically.
🎯 How to trade it
Apply it to a market that produces real breakouts and let the dashboard populate. Read the live win rate, profit factor, and average R for your symbol and timeframe before committing — if the logic doesn't suit that market, you'll see it.
Keep the HTF Trend Alignment filter on so you only take breakouts in the direction of the larger trend.
Wait for a STRONG LONG / STRONG SHORT BREAKOUT label — it marks a confirmed break of a tested zone or structure, with the BOS / CHoCH tag, star score, and Entry, SL, and TP1/2/3 already plotted.
Manage the trade with the plotted levels: a common approach is to take partial profit at TP1 1R, move the stop toward breakeven, and let the rest run to TP2/TP3. The structural SL defines your risk on the trade.
Use Minimum Pivot Tests and Minimum Strength to set your style — stricter for fewer, cleaner breakouts; looser for more activity — and use the star score and Only-Strong gate to focus on the cleanest setups.
⚠️ Important — this is a decision-support tool, not a standalone buy/sell system, and it makes no performance guarantees. Default settings were chosen on historical data and behavior will vary by symbol, timeframe, and configuration; the dashboard's statistics are historical and descriptive, not a forecast. The first target is a genuine 1R and the stop is structural by design no inflated win-rate geometry, which means reward-to-risk and position sizing matter as much as hit rate. Pivot-based zones confirm after the pivot lookback inherent pivot lag, so always wait for the labeled signal on a closed bar. Always combine it with your own analysis and risk management, and test it on your market before trading it live. Indicator
Strong Pullback Signals | ProjectSyndicateStrong Pullback Signals identifies high-probability trend-continuation entries by waiting for an established trend, a clean breakout, and then a pullback — and instead of chasing the bounce, it places the entry with a limit order into the pullback at a better price. Every setup is given a structural stop beyond the pullback swing and fixed R-based targets, ranked 0–10 with a star score, and tracked live on a full statistics dashboard so you can see how the logic behaves on the exact symbol and timeframe you trade.
🧠 Limit-Into-Pullback Entry Engine — the core idea. The indicator arms only after a real breakout in the direction of the trend, then works a limit order back into the pullback rather than entering at the close of a confirmation candle. You get filled at a better price on the retracement instead of paying up after the move has already resumed. Signals confirm on closed bars and do not repaint historically.
📈 Triple-EMA Trend Regime — a fast, slow, and pullback EMA define the trend and the retracement zone. A setup can only arm when price, the EMAs, and the EMA slope all agree, so entries are taken with the trend, not against it.
🎯 Structural Stop + R-Based Targets — the stop is placed just beyond the pullback's swing extreme with an ATR buffer, then capped and floored so it can never balloon into a "wide stop" or collapse into a meaningless one. TP1, TP2, and TP3 are set at clean R multiples (TP1 defaults to a full 1R — a real first target, not a clipped one). Every signal plots its complete Entry / SL / TP1 / TP2 / TP3 line set, labeled price levels, and filled green TP / red SL zone boxes, with a result label on exit.
🎚️ Adjustable Entry Depth — one input controls how deep into the pullback the limit sits. Deeper fills mean a better entry price and fewer trades; shallower fills mean more frequent entries. This is your main dial for trading conviction versus frequency.
🧭 HTF Trend Alignment Filter — an optional higher-timeframe EMA filter blocks counter-trend setups, keeping you on the dominant side of the market. RSI-direction and session (time-of-day) screens are also available for further filtering.
⭐ 0–10 Setup-Quality Score — every signal is scored and labeled with 1–5 stars and a tier (FORMING → ELITE) across HTF alignment, trend strength, entry depth, momentum, volume, and session. Treat the score as a confluence / cleanliness read for ranking and thinning setups — it describes how textbook a setup is, not a guaranteed outcome. A "Minimum Stars / Only Strong" gate lets you display and alert on stronger setups only while the dashboard keeps tracking every tier in the background.
📊 Live Statistics Dashboard — a non-intrusive panel tracks, in real time on your chart: current trend and setup status, the active trade, the last signal and its score, win rate, total trades, profit factor, average R per trade, best-performing direction, long vs short win rate, current and max win/loss streaks, and a TP1 / TP2 / TP3 / SL hit breakdown. These are computed live from the signals on your current symbol and timeframe — so you can judge the settings yourself rather than trusting a number printed in a description.
🎨 Clean Themed Visuals — four color themes, opaque labels anchored clear of price for unobstructed reading, and a compact level "ticket" that stays attached to each trade and snaps to the exit bar when it closes.
🔔 Detailed Alerts — fires on strong long / short entries, plus partial-TP, TP3, and SL events, including direction and score, formatted for manual or automated use. A minimum-stars setting can restrict alerts to higher-conviction setups.
🔧 Fully Customizable — every component is exposed: the three EMAs and slope, breakout lookback and body filter, cooldown, entry depth, structural-stop buffer with risk cap/floor, the three R targets, the HTF / RSI / session filters, the six score weights, and all dashboard, label, and theme options.
🎯 Why this is different — most pullback and reversal tools enter by chasing a confirmation candle and treat every signal the same. This one fixes the entry mechanics first (a limit into the pullback for a better fill, with a structural stop and honest R targets), then layers an objective 0–10 ranking and a live, on-chart statistics panel on top — so you are tuning and judging the system on real, current data instead of a marketing figure.
🚀 Where to use it — trend-following markets across Forex, Gold (XAUUSD), indices, and crypto, on intraday and swing timeframes (M10/M15/M30/H1 and up). The ATR-based stop and R targets adapt to each asset's volatility automatically.
🎯 How to trade it
Apply it to a market that actually trends and let the dashboard populate. Read the live win rate, profit factor, and average R for your symbol and timeframe before committing — if the logic doesn't suit that market, you'll see it.
Keep the HTF Trend Alignment filter on so you only take pullbacks in the direction of the larger trend.
Wait for a STRONG LONG / STRONG SHORT label — that marks a filled limit entry into a pullback, with Entry, SL, and TP1/2/3 already plotted.
Manage the trade with the plotted levels: a common approach is to take partial profit at TP1 (1R), move the stop toward breakeven, and let the rest run to TP2/TP3. The structural SL defines your risk on the trade.
Use Entry Depth to set your style — deeper for fewer, higher-quality fills; shallower for more activity — and use the star score and Minimum-Stars gate to focus on the cleaner setups.
⚠️ Important — this is a decision-support tool, not a standalone buy/sell system, and it makes no performance guarantees. Default settings were chosen on historical data and behavior will vary by symbol, timeframe, and configuration; the dashboard's statistics are historical and descriptive, not a forecast. The first target is a genuine 1R and the stop is structural by design (no inflated win-rate geometry), which means reward-to-risk and position sizing matter as much as hit rate. Always combine it with your own analysis and risk management, and test it on your market before trading it live. Indicator
Strong Candlestick Patterns | ProjectSyndicateStrong Candlestick Patterns automatically detects, scores, and highlights 25 classic Japanese candlestick patterns using an objective, non-repainting engine built on the teachings of Steve Nison. It confirms every pattern on the bar close, grades each setup 0–10 for quality, draws it as a clean color-coded zone with a name label and ★ star rating, and surfaces the most recent signal on every timeframe through a non-intrusive multi-timeframe scanner — turning subjective candle-reading into a quantifiable, repeatable process.
🕯️ 25-Pattern Detection — recognizes the full Nison family from raw geometry: Hammer, Hanging Man, Inverted Hammer, Shooting Star, Dragonfly / Gravestone / Long-Legged Doji, Bullish / Bearish Marubozu, Bullish / Bearish Engulfing, Bullish / Bearish Harami, Piercing Line, Dark Cloud Cover, Tweezer Top / Bottom, Bullish / Bearish Windows (gaps), Morning Star, Evening Star, Three White Soldiers, Three Black Crows, and Rising / Falling Three Methods.
🔒 Close-Confirmed, Non-Repainting — patterns are evaluated on confirmed candles only; the live bar waits for its close before committing, so signals, zones, and labels are stable and never redrawn after the fact.
⭐ 0–10 Quality Scoring — every setup is graded by blending five factors Nison stresses: textbook shape fit (40%), candle significance vs ATR (22%), trend-context strength (18%), volume confirmation (12%), and EMA confluence (8%). The result is shown as a ★ star meter with a numeric score and a WEAK / MODERATE / STRONG / ELITE tier, so you can instantly gauge conviction and filter for only the best.
🧭 Trend-Context Gating — reversal patterns fire only counter-trend and continuation patterns only with-trend (toggleable), enforcing the core rule that a pattern is meaningless without the right preceding trend.
🎨 Direction-Matched Zones & Labels — each pattern is boxed as a blue (bullish), orange-red (bearish), or gray (neutral) zone spanning its candles, with a clean name label and rating placed above bearish setups and below bullish ones for instant, clutter-free read.
📡 Multi-Timeframe Scanner Row — a non-repainting top dashboard shows the symbol plus eight fully configurable timeframes (M15 → D1 by default), each displaying the latest pattern and its bars-ago count, with fresh signals highlighted so you can spot multi-timeframe alignment at a glance.
✅ Advanced Quality-Control Filters — strong-only mode (default: ELITE 8+), direction filter, ATR-based minimum candle-size gate, per-pattern shape tolerances (doji body %, shadow multiple, engulfing/tweezer/star ratios), minimum bars between signals, and individual on/off toggles for all twelve pattern groups eliminate noise and over-signaling.
🔔 Comprehensive Alerts — a single rich alert() message (direction, pattern name, 0–10 score, symbol, timeframe, close) for automation, plus three individually selectable named conditions: Bullish Pattern, Bearish Pattern, and Elite Pattern (8+).
🔧 Fully Customizable — control trend EMA and lookback, volume average, zone padding and transparency, bullish/bearish/neutral colors, label and scanner text sizes, scanner position, and the per-timeframe set.
🎯 Why this is unique: Standard candlestick tools simply paint a name on a candle with no context or grading. This is an objective, fully-gated, non-repainting engine that recognizes 25 patterns from raw OHLC geometry, confirms each on the close, validates it against trend context and volume, grades its quality 0–10, and tracks it across eight timeframes — so you act only on the highest-conviction setups instead of every random wick.
🚀 Apply to Gold (XAUUSD), Forex, Crypto, Indices, and equities on any timeframe. The ATR-based, self-scaling logic adapts from M5 scalping to H4/Daily swing trading.
🎯 How to use this? Favor higher-star (STRONG/ELITE) setups that align with the higher-timeframe trend shown in the scanner row. Use the strong-only threshold to keep the chart sparse and focus on quality; loosen the shape tolerances if a pattern fires too rarely on a given asset, or tighten them to reduce noise.
⚠️ IMPORTANT NOTICE: This indicator identifies quality-graded candlestick signals; it should NOT be used as a standalone entry trigger. Always combine it with your own trading strategy, price-action analysis, key support/resistance levels, and sound risk management to confirm setups. Indicator
Strong FU Candle | ProjectSyndicateSTRONG FU CANDLE
Strong FU Candle marks the exact bars where the market sweeps liquidity and snaps back — the classic "follow-up" reversal candle that traps breakout traders and ignites the move the other way. It scans every bar for a liquidity grab beyond the prior candle's wick followed by an engulfing close back through it, grades each setup on candle anatomy, projects a full Entry / Stop / TP1-TP2-TP3 trade plan with live fill tracking, and stores the resulting liquidity zones so you can see — on the same chart — which FU types actually held and which failed.
🎯 0–10 QUALITY SCORE
Each FU candle earns a live grade from five sign-stable anatomy factors on the setup bar itself:body dominance — body-to-range ratio (a real FU closes near its extreme, not in the middle).Opposite wick — penalises any pullback from the close back into the body, since a clean FU has almost no opposite wick.Grab wick — rewards a meaningful sweep wick but punishes the oversized "all wick, no body" candle.Close position — how far into the bar's range the close lands (≥90% of range = full credit).Size & participation — bonus when the candle is normal-sized relative to ATR (not a micro-bar, not a freak spike) and volume is at or above its average.
🏷️ CALIBRATED TIERS — C / B / A / S
The raw 0–10 score maps to four tiers, calibrated on 8 H1 FX pairs (2024–2026) at 1:1 RR: C≈52%, B≈53%, A≈55%, S≈59% win rate (vs 54.6% unfiltered). Raise the minimum tier toward A/S for higher win rate and fewer signals; drop to C for maximum signal flow.
🕯️ FULL vs ATTEMPTED (ATT) FU
Full FU = close fully engulfs the prior candle's wick. Attempted FU = close engulfs the prior candle's body but not its wick — weaker, but often a valid early reversal. ATT can be toggled off entirely.
🧹 FILTERS
EMA filter (bull FUs only above EMA, bear FUs only below — keeps you trading with short-term momentum), rejection filter (drops candles where the opposite-side wick is larger than the body), fractal filter (requires the FU to actually sweep a recent swing high/low), and a configurable point-size system so every threshold — grab size, engulf depth, min/max body, min range — scales correctly across gold, FX, indices and crypto.
🧊 LIVE LIQUIDITY ZONES
Every qualifying FU is drawn as a zone anchored to the bar that created it, sourced from either the grab wick (default) or the full FU candle range, with an optional 50% midline. Zones never drift — they sit on the price action that formed them. A label above each zone shows timeframe, side, tier, score, BIW marker, and the live win rate of that side on this timeframe.
📜 HISTORIC ZONES & WINNER LEVELS
Old zones fade into a historic layer, colour-coded by outcome (green = TP1 hit, red = stopped out). Option to show winners only and clean the chart of losses. For the most recent N winners the indicator can re-draw the original Entry, Stop and TP1/TP2/TP3 lines on the historic zone, so you can visually audit exactly how the playbook performed in past conditions.
📐 PROJECTED TRADE PLAN — ENTRY / SL / TP1-TP2-TP3
Every new FU prints a complete trade plan on the chart: Entry (at 50% body, 50% wick, or FU close — your pick), Stop with adjustable buffer beyond the candle, and TP1 / TP2 / TP3 at user-defined R multiples. Reversal mode treats bullish FU as a BUY; Fade mode flips it.
🎛️ LIVE TRADE PANEL
A side panel tracks the latest setup in real time: direction, exact Entry / SL / TP1 / TP2 / TP3 prices, and a live status line — PENDING → FILLED → TP1 hit → TP2 hit → TP3 HIT, or STOPPED OUT, or NO FILL (missed) if price ran without filling.
📊 STATS DASHBOARD
A separate leaderboard tracks per-side performance on the current timeframe and current tier filter: Win Rate, Probability of Touch (fill rate), Expected Value in R, configured R:R, average bars to win, average bars to loss, and a W / L • n • avg-score line. BUY and SELL columns are tracked independently so you can see if one side is dominating.
🌐 MULTI-TIMEFRAME OVERLAY
Up to three higher timeframes can be overlaid as drawn-only zones (15m / 1H / 4H by default, any TF), so a 5m chart can show 1H FU zones still in play. Higher-TF zones are draw-only and excluded from current-TF stats to keep the dashboard honest.
🔔 NATIVE ALERTS
Dedicated alerts for a BUY setup formed, a SELL setup formed, any bullish/bearish FU on any active TF, price touching an FU zone (entry filled), and price approaching a zone within a user-set tick proximity.
🔧 FULLY ADJUSTABLE
Detection thresholds in points (grab size, engulf depth, min range, min/max body); ATT FU on/off; EMA / rejection / fractal filter toggles and lengths; volume baseline length; minimum tier and minimum numeric score; direction logic (Reversal vs Fade); entry mode and stop buffer; TP1/TP2/TP3 multiples; zone source (grab wick vs full range), max active zones per side, historic cap, transparencies, midline on/off; full colour theme (bull, bear, win, loss, touched border); candle-colour toggle; label size; dashboard position and text size; up to three MTF channels; alert proximity.
🚀 Works on gold (XAUUSD), silver, forex, crypto and indices, on any timeframe.
────────────────────────
HOW TO TRADE IT — TWO APPROACHES
The tier chooses the playbook. High-tier FUs tend to reverse cleanly; low-tier FUs are coin flips that need extra confluence.
TRADE THE FU — reversal (A / S tier, score ≥ 6.5)
Use when a high-tier FU prints — calibrated to win ~55–59% at 1:1 with positive expectancy.
Wait for the FU to close and the trade plan to draw — Entry, SL, TP1/TP2/TP3.
Take the entry at your chosen level (50% body is the default — gives a pullback fill).
Stop just past the FU extreme with the buffer.
Scale at TP1, trail or hold for TP2 / TP3.
The trade panel tells you live whether you are PENDING, FILLED, in profit, or stopped.
FILTER & WAIT — selectivity (C / B tier)
Use C and B tier as context, not standalone signals — at the unfiltered ~54% baseline they need help.
Drop to C/B only when stacked with: a strong S/R level, an HTF FU in the same direction, an EMA reclaim/loss, or a fractal sweep.
Otherwise raise the minimum tier to A or S and accept fewer signals for a higher hit rate.
Use the live dashboard — if BUY WR on this TF is sitting at 45% over a decent n, that's a signal to either flip to Fade mode or sit out longs entirely on this instrument.
Rule of thumb: S/A tier → take the trade as drawn. B/C tier → needs confluence, or skip. Watch the live dashboard — let the actual win rate on this instrument tell you which side is paying.
────────────────────────
⚠️ This tool identifies high-probability liquidity-grab reversal candles and frames a full trade plan around each one. It is NOT a standalone buy/sell signal. Always combine it with your own strategy, price-action analysis and risk management to confirm setups. Past statistical behaviour does not guarantee future results. Indicator
Strong Reversal Signals | ProjectSyndicateStrong Reversal Signals automatically identifies high-probability, non-repainting reversal setups formed after liquidity grabs, then ranks every signal 0–10 with a star strength score so you can instantly see the strongest trades. It calculates adaptive take-profit and stop-loss zones based on Average Daily Range (ADR), after each sweep, and presents a complete statistical breakdown — including win rate by strength tier — on a non-intrusive dashboard to provide a quantifiable, rankable edge.
⭐ Star Strength Ranking (0–10) — every signal is scored across five independently-tested factors (trend context, rejection-wick depth, volatility regime, mean proximity, and sweep depth) and labeled with 1–4 stars. The ranking was validated symbol-out across multiple GBP datasets, so the stars genuinely separate win rate rather than just decorating the chart.
🧠 NRP Liquidity-Grab Reversal Engine — uses a non-repainting pivot/HTF/session engine to detect liquidity sweeps, ensuring signals are stable and never repaint.
🎯 ADR-Adaptive TP/SL Zones — automatically calculates and plots uniform-width TP1, TP2, and SL zones as a percentage of the 10-day ADR, so the strategy dynamically adapts to any asset's volatility. Every historic signal keeps its full zone set on the chart.
🎨 Clean Green/Maroon Theme — BUY Reversal labels are green and SELL Reversal labels are maroon, each carrying its star rank, with fully opaque labels anchored clear of the candles for instant, unobstructed visual confirmation.
📊 Win-Rate-by-Strength Dashboard — a complete statistical overview: real-time ADR10, total trades, wins/losses, total R, expectancy, TP2 hits, the last 10 outcomes, and a dedicated Win Rate By Strength table showing the live win rate and sample size for each star tier (★ through ★★★★).
✅ Strength-Gated Display & Trading — a single "Minimum Stars To Plot" input lets you hide weaker setups and focus only on the strongest, while the dashboard keeps tracking every tier in the background.
🔔 Star-Ranked Alerts — get a single, detailed alert per signal including direction, star rank and strength tier (ELITE/STRONG/MODERATE/WEAK), symbol, timeframe, entry, SL, TP1, and TP2 — formatted for automated trading. A dedicated "Alert Minimum Stars" setting lets you fire alerts on strong setups only.
🔧 Fully Customizable — control everything from liquidity source , pivot length, and the five strength weights to TP/SL percentages, zone width and height, label and dashboard sizes, colors, and the star thresholds for plotting and alerts.
🎯 Why this algo is unique: Standard reversal and ZigZag indicators repaint and offer subjective signals with no statistical backing — and crucially, they treat every signal as equal. This algorithm provides an objective, non-repainting signal engine and ranks each setup by measured strength, with the ranking validated out-of-sample so the strongest signals demonstrably win more often. It builds a complete, quantifiable framework around each reversal with adaptive ADR risk management and a dashboard that proves performance per strength tier on the chart you are trading.
🚀 Apply to Gold (XAUUSD), Forex, Crypto, and Indices on any M5/M10/M15/M30/H1. The ADR-based zones and strength engine adapt from M5 scalping to H4 swing trading.
🎯 How to use this? Watch the Win-Rate-by-Strength table to see which tiers perform best on your asset/timeframe, then prioritize ★★★★ setups (or set "Minimum Stars To Plot" to 4). Adjust the TP/SL percentages to your risk tolerance, and favor signals that align with the higher-timeframe trend.
⚠️ IMPORTANT NOTICE: This indicator identifies statistically-backed, strength-ranked reversal signals. The published win rates are historical, measured on specific GBP M10 data and a fixed target geometry — past performance does not guarantee future results, and figures will vary by symbol, timeframe, and settings. The system also wins small per trade relative to its stop (high win rate, modest reward-to-risk), so position sizing matters. It should NOT be used as a standalone entry signal. Always combine it with your own strategy, price action analysis, and risk management. Indicator
Strong Rejection Zones | ProjectSyndicateSTRONG REJECTION ZONES
Strong Rejection Zones marks the prices where the market keeps getting pushed back, and grades every one of them so you can tell at a glance which levels are worth respecting and which are likely to fold. It scans for three independent signatures of rejection — swing pivots, dominant rejection wicks, and volume spikes — folds overlapping hits at the same price into a single zone, and assigns each zone a live 0–10 power score built only from measurable level quality. Heavily-confirmed zones are drawn bold and solid; thin, one-off levels stay faint. An on-chart leaderboard ranks every live zone, so the whole support-and-resistance map is readable in one look.
🎯 0–10 POWER SCORE
Each zone earns a live grade from four weighted, sign-stable factors:
Confluence — how many separate detections stack at the level, with diminishing returns so one isolated touch never scores high on its own.
Diversity — a level confirmed by pivots AND wicks AND volume outranks one confirmed a single way.
Detection strength — volume versus its baseline, wick dominance, and range expansion on the candle that formed the level.
Recency — recently defended levels rank above stale ones, with a configurable decay.
ELITE (9–10) is intentionally hard to reach: in practice it takes all three footprint types lining up on a strong, fresh, well-confirmed level — so the grade reflects real edge, not decoration. All four weights are adjustable.
🏷️ IN-ZONE LABELS
Every graded zone carries a tag above the band — side (BULL / BEAR), tier, the X/10 score, a star rating, the confluence count (×N detections), and live distance from price in both percent and pips. The tag is pinned to the zone's right edge and grows inward, so it never hangs off the box.
🧲 CONFLUENCE MERGING
Same-side detections that land within the cluster tolerance are folded into one zone and raise its grade, instead of littering the chart with a separate line for every swing. One graded level per pool.
🥇 ELITE HIGHLIGHT
The top tier is rendered in a brighter shade of its side colour with a heavy accent border, so the levels that matter jump out before you read a single number. Tier ladder: FAINT → WEAK → MEDIUM → STRONG → ELITE.
🎨 STRENGTH-SHADED FILL
Fill opacity tracks the score — strong zones print solid, weak ones stay faint — so relative importance is visible without reading any text.
📊 RANKED DASHBOARD
A leaderboard sorts active zones by power and shows rank, side, tier, exact price, score with stars, and distance + direction from price (▲ above / ▼ below). Choose any of four corners, four text sizes (Tiny → Large), and how many rows to show. A header line summarises how many ELITE / STRONG / active zones are live.
📍 ORIGIN-ANCHORED ZONES
Each zone is drawn from the bar where its level first formed and extended to the right. It stays anchored to that price — it does not drift or re-center as new detections arrive, so the band always sits on the price action that created it.
🔒 STABLE, LOCK-IN ZONES
Zones are built only on confirmed bars and updated in place. A zone keeps its grade, tier and position once it is drawn; it only changes state when price genuinely breaches it (by close or by wick — your choice), at which point it either clears or stays on as a faded broken level.
🧹 CLEAN-UP FILTERS
Hide any zone under a chosen power score, enforce a minimum separation between same-side zones, and suppress zones forming right on top of current price.
🔔 NATIVE ALERTS
Dedicated alerts for an ELITE cluster forming, a STRONG cluster forming, a zone being breached, fresh bullish and bearish detections, and price approaching a STRONG or an ELITE zone.
🔧 FULLY ADJUSTABLE
Detection toggles and sensitivity (pivot length, wick-dominance ratio, volume-spike multiple, baseline length); clustering tolerance and minimum separation; zone geometry (ATR length, height, max active zones, right-extension); the four score weights plus confluence-for-full-credit, decay length and decay floor; score and distance filters, breach method (close or wick), and keep-or-clear on breach; the full colour theme (bull, bear, broken, accent), fill-opacity range and ELITE border width; label size and which scores get labelled; dashboard position, rows and text size; and alert thresholds.
🚀 Works on gold (XAUUSD), silver, forex, crypto and indices, on any timeframe.
────────────────────────
HOW TO TRADE IT — TWO APPROACHES
The score chooses the playbook. High-grade zones tend to hold and reverse; thin zones tend to give way. So treat them differently.
FADE THE ZONE — reversion (STRONG / ELITE, score ≥ 7)
Use when price is approaching a high-grade zone — the most-confirmed levels, and statistically the most likely to react.
Wait for price to tap the zone (the dashboard distance shows it closing in).
Look for a wick into the band and a close back outside it.
Enter on the rejection back out of the zone.
Stop just past the far edge — a sustained close through it means the level failed.
Target the next zone on the dashboard, then the nearest strong zone on the opposite side.
TRADE THE BREAK — continuation (WEAK / MEDIUM, or once a strong zone breaches)
Use on thin, single-type or stale levels — the ones most likely to break.
Wait for a decisive close through the zone on expanding volume, not a single wick.
The zone switching to a broken state is your confirmation it is a real break, not a stop-hunt.
Enter with the break beyond the zone, or on a retest of the broken level.
Stop back inside the broken zone.
Target the next zone in that direction.
Rule of thumb: high-grade → expect a reaction, fade the tap. Low-grade on volume → expect follow-through, trade the break.
────────────────────────
⚠️ This tool highlights high-probability rejection levels and frames fade-versus-break scenarios. It is NOT a standalone buy/sell signal. Always combine it with your own strategy, price-action analysis and risk management to confirm setups. Past statistical behaviour does not guarantee future results. Indicator
Confluence FVG Finder | ProjectSyndicateConfluence FVG Finder automatically identifies and validates high-probability, non-repainting Fair Value Gaps. It filters for structural quality using an ATR-based imbalance filter, normalizes all zone heights for consistency, and embeds a live multi-timeframe confluence engine inside every zone to provide a quantifiable, data-driven edge.
🧠 Live Multi-Timeframe Engine — This is not a single-timeframe tool. Every FVG zone displayed on the chart is the result of a live, proximity-based confluence engine scanning three independent higher timeframes (default H1, H2, H4) simultaneously. Each label shows exactly how many timeframes confirmed the zone, its composite strength rating (0–10), the session it formed in, its age, and its exact pip height, giving you an instant structural edge.
🎯 Imbalance-Validated FVGs — The engine doesn't just mark any three-candle gap. It validates each Fair Value Gap on the higher timeframes by requiring the gap to exceed a user-defined multiple of ATR, filtering out insignificant micro-gaps and focusing only on imbalances that reflect true market-moving intent before they are even considered for merging.
🎨 ATR-Normalized Zones — Eliminates visual noise from inconsistent gap sizes. This feature forces every merged FVG zone to a uniform, ATR-based height (e.g., 0.75x ATR). This provides a clean, consistent chart and allows for a more objective analysis of price interaction with zones of equal visual weight, preventing oversized gaps from distorting the chart.
📊 Proximity-Based Merging — Timeframes rarely align perfectly to the pip. The confluence engine uses an intelligent ATR-based proximity tolerance to detect when Fair Value Gaps from different timeframes are clustered in the same price territory. It then mathematically merges them into a single, high-probability "Confluence Zone," ensuring you don't miss valid setups due to minor price discrepancies across timeframes.
✅ Chart-Timeframe Independent — The engine's credibility comes from its architectural stability. Each timeframe is detected entirely inside its own data context and every zone is anchored to the timestamp it formed on, so — unlike standard MTF indicators that repaint or shift zones depending on the chart you are viewing — the merged zones are mathematically identical whether you view them on a 5-minute, 15-minute, or 1-hour chart.
🔧 Fully Customizable — Control every aspect of the engine, including the 3 target timeframes (default H1 / H2 / H4), the Minimum Timeframe Confluence threshold (e.g., require 3 out of 3 TFs), the Proximity Tolerance multiplier, the Minimum Strength Filter, the per-timeframe strength bonus, the mitigation mode (Touch / Full Fill / 50% Fill), and the colors/visibility of Bullish and Bearish zones.
🔬 Why this algo is unique: Standard FVG indicators are subjective — often just shading every three-candle gap on the current timeframe with no proof of higher-timeframe alignment. The Confluence FVG Engine transforms this into an objective, multi-dimensional instrument. It doesn't just show you a gap; it proves the imbalance is backed by aligned intent across multiple timeframes, merging them into a single, undeniable area of interest on the exact chart you are viewing.
🌐 Apply to Gold (XAUUSD), Indices (US30, NAS100), Forex Majors, and Crypto. With the default H1 / H2 / H4 structure, execute from any timeframe at or below H1 (1m–1h) while the engine tracks the H1, H2, and H4 imbalances. The engine is designed for assets that exhibit clear impulsive moves and respect deep supply/demand dynamics.
🗂️ How to use this? The most critical metrics are the Timeframe Confluence Count and the Strength Rating. A zone confirmed by 3 timeframes with a Strength of 8.0+ indicates a massive structural edge. Consider only taking trades from these high-confluence zones that align with the prevailing higher-timeframe trend. The embedded label also shows the exact "pips away" distance, allowing for precise limit order placement. Note: Timeframe 1 is the anchor — keep your chart at or below it (H1 by default) so zones render exactly; an on-chart warning appears if your chart timeframe is set higher.
⚙️ IMPORTANT NOTICE: This indicator is a professional-grade tool designed to identify structural confluence. It should NOT be used as a standalone signal for entering trades blindly. Always use it in conjunction with your own trading strategy, price action analysis, and strict risk management to confirm trade setups. Indicator
Strong Liquidity Zones | ProjectSyndicateStrong Liquidity Zones
Strong Liquidity Zones finds the price levels where liquidity actually pools — then power-ranks them so you instantly know which zone is likely to hold and which is likely to give way. It detects three independent footprints of liquidity (swing pivots, wick-rejection traps, and volume spikes), merges overlapping detections into confluence clusters, and scores each cluster 0–10 from real, measurable level quality. Strong, multi-confluence zones are framed and highlighted; weak, single-touch zones stay faint. A live dashboard lists every viable level, ranked, so the whole map of support and resistance is readable at a glance.
🎯 Power-Ranking System (0–10) — every zone earns a live grade from four sign-stable factors: confluence (how many separate detections stack at the level, with diminishing returns so a single tap can't fake strength), detection diversity (a level confirmed by pivots and wick traps and volume carries far more weight than one confirmed a single way), detection strength (volume vs baseline, wick dominance, and range expansion on the forming candle), and recency (freshly defended levels score higher than stale ones). ELITE (9–10) is deliberately rare — it requires genuine all-three-type confluence on a strong, recent level, so the number reflects real edge, not decoration.
🏷️ In-Zone Strength Labels — each zone carries its grade inside the band: side (Bull/Bear), tier, the X/10 score, a star rating, the confluence count (×N detections that built it), and live distance from price in both % and pips. Quality and proximity read instantly without hunting through a panel.
🧲 Confluence Clustering — instead of plotting every raw detection as its own line, nearby detections are grouped into a single strength-weighted zone centered on where the liquidity truly sits. One clean level per pool, not a cluttered stack.
🥇 ELITE Highlighting — the strongest clusters are rendered as a brighter shade of the same side colour with a heavy border, so the levels that matter most stand out before you read a single number. Tier ladder: FAINT → WEAK → MEDIUM → STRONG → ELITE.
🎨 Strength-Shaded Fill — stronger zones render sharper and more opaque while weak ones stay faint, so the chart shows which levels carry weight at a glance.
📊 Live Level Dashboard — an on-chart leaderboard lists every active zone sorted by power and distance from price, with tier, side, exact price, score, and direction (▲ above / ▼ below). Adjustable position and text size (Small → Huge). See all viable levels at once, ranked.
📍 Origin-Anchored Zones — every zone is drawn from the bar where the level was first established and extends to the right, so each band is visually tied to the price action that created it — never floating in mid-air.
🔒 Stable, Lock-In Zones — zones are created only on confirmed bars and reconciled in place: once a zone is on the chart it keeps its grade, tier, and position and won't flicker or shuffle intraday. A zone is removed only when price genuinely breaches it or the level is invalidated — one clean transition, never random blinking.
🧹 Score Filter — hide every cluster below a chosen power rank so the chart only carries the levels that earned their place, plus a minimum-separation and minimum-distance-from-price control to keep the picture clean.
🔔 Native Alerts — dedicated alerts for an ELITE (9–10) cluster forming, a STRONG (7–8) cluster forming, a zone being breached, and fresh bullish / bearish liquidity detections — so you never miss a high-quality level appearing or failing.
🔧 Fully Customizable — detection sensitivity (pivot length, wick-dominance ratio, volume-spike multiplier, strength threshold), clustering (tolerance, lookback, minimum points, minimum rank, re-cluster interval, distance-from-price), zone geometry (ATR period, width, max active zones, separation), display (label size, fill opacity, elite border thickness), dashboard (position, rows, text size), and the full colour theme — all adjustable.
🎯 Why this is different — most "liquidity" or "support/resistance" tools dump every swing onto the chart and leave you to guess which line matters. This one fuses three independent liquidity footprints, clusters them into clean zones, and quantifies each one from real level quality — then tells you the probability-weighted answer: a STRONG/ELITE zone is one to fade, a WEAK zone is one that's likely to break. The scoring even informs how you trade each level (see below).
🚀 Apply to Gold (XAUUSD), Silver, Forex, Crypto, and Indices on any timeframe.
🎯 How To Trade It — Two Approaches
The score is the filter that decides which approach fits. Strong, multi-confluence zones tend to hold and reverse; weak, thin zones tend to break. So play them differently.
1) Fade the Zone — Reversion (use on STRONG / ELITE zones, ≥7)
Best when the zone price is approaching is rated STRONG or ELITE — these carry the most confluence and are statistically the most likely to hold.
Wait for price to tap into the high-grade zone (the dashboard's ▲/▼ distance shows it approaching).
Look for rejection: a wick into the band and a close back out of it — the liquidity above/below the level gets swept, then price turns.
Entry: on the reversal back out of the zone (close rejecting the band).
Stop: just beyond the far edge of the zone — if price closes through and holds, the level has failed and the fade thesis is wrong.
Targets: the next zone in the dashboard, then the opposite side's nearest strong zone.
Use the STRONG / ELITE cluster alert to know the moment a high-grade level appears, and the distance readout to time the tap.
2) Trade the Break — Continuation (use on WEAK / MEDIUM zones, or once a strong zone breaches)
Best when the level is rated WEAK or MEDIUM (thin, single-type, or stale) — these are the levels most likely to give way.
Wait for a decisive close through the zone on expanding volume — not a single wick.
The zone flipping from active to breached on the chart is your confirmation it's a genuine break, not a stop-hunt.
Entry: in the direction of the break on the close beyond the zone, or on a retest of the broken zone (a broken bull zone flips to resistance; a broken bear zone flips to support).
Stop: back inside the broken zone.
Targets: the next zone in that direction on the dashboard, trailing as the move extends.
Rule of thumb: ⭐ STRONG / ELITE → expect a reaction, fade the tap. ⭐ WEAK / MEDIUM on volume → expect follow-through, trade the break.
⚠️ IMPORTANT NOTICE: This indicator identifies high-probability liquidity levels and frames fade-vs-break scenarios. It should NOT be used as a standalone signal for entering trades. Always combine it with your own strategy, price-action analysis, and risk management to confirm setups. Past statistical behavior does not guarantee future results. Indicator
Strong Range Breakouts | ProjectSyndicateStrong Range Breakouts
Strong Range Breakouts power-ranks the consolidations your market keeps coiling into — and tells you, before the move, which one is loaded and which way it's likely to break. For every tightening range it builds a clean, equal-logic zone, scores that consolidation 0–10 from real, measurable compression quality, and stamps a directional probability on it (▲ likely UP / ▼ likely DOWN). It then projects Buy-Stop / Sell-Stop breakout levels with a buffer and full SL / TP1 / TP2 / TP3 targets — and tracks every breakout's outcome live in a win-rate dashboard, so the chart is constantly grading its own edge instead of asking you to take it on faith.
🎯 Power-Ranking System (0–10) — every consolidation earns a live grade from five sign-stable, self-calibrating factors: trend flatness (ADX percentile — is the market genuinely going nowhere?), volatility squeeze (Bollinger-width percentile — is range compressing vs its own recent history?), range tightness (N-bar range percentile — how coiled is price?), volume dry-up (low participation = accumulation), and price balance (RSI sitting near 50 = no directional pressure yet). Each factor is a smooth percentile rank, not a crude on/off flag, so the score spreads cleanly across the full 0–10 range and adapts to any instrument with no re-tuning. Prototyped and validated across FX datasets (EUR/USD, GBP/USD, USD/CHF) — higher-scored ranges produced cleaner, higher-win-rate breakouts than low-scored ones, so the number reflects genuine edge, not decoration.
🧭 Directional Probability — each zone carries a live ▲/▼ breakout bias built from where price sits in the range, top-vs-bottom edge-touch asymmetry, time spent in the upper vs lower half, and momentum lean. In validation this prediction landed correct 77–81% of the time vs a 50% coin-flip — so the bias on the box is a real tell, not a guess.
🏷️ Strength-Rank Label Above Every Box — each range carries its grade on top of the zone, impossible to miss: stars · X.X/10 · tier (FORMING → MODERATE → STRONG → VERY STRONG → ELITE) plus the directional bias. Quality and likely direction read instantly, no separate panel needed.
🎨 Direction-Coloured, Strength-Shaded Zones — boxes are tinted by their predicted break direction (bullish-bias teal, bearish-bias red/purple), and the shade deepens with strength tier, so the chart shows which ranges carry weight and which way they lean before you read a single number. The label freezes tinted to the actual break direction once it fires.
🚧 Buy / Sell Stop & SL / TP Levels — dashed Buy-Stop and Sell-Stop lines sit a configurable buffer beyond each range edge to define a genuine breakout. On a fired breakout the indicator projects a structure- or ATR-based Stop-Loss and TP1 / TP2 / TP3 at your chosen R-multiples, framing the trade the moment it triggers.
📊 Live Win-Rate Dashboard — an institutional gold-on-dark panel that tracks outcomes, not just signals: overall win rate (with █░ meter), total breakouts, wins/losses, Long WR vs Short WR, Strong-Zone WR (≥8), TP1/TP2/TP3 hit counts, expectancy (R per trade), total R, best/worst streak, the live zone score meter, and the current breakout bias. You see the system's measured performance on your symbol and timeframe in real time.
🔒 Non-Repainting — all detection and scoring run only on confirmed candles. A zone forms, extends, and breaks on closed-bar logic; once a breakout fires the level and its label lock in and never repaint.
🔔 Native Alerts — fires on a confirmed Buy breakout and Sell breakout, with the zone's score and entry level embedded in the message, so you're notified the instant a graded range gives way.
🔧 Fully Customizable — minimum score to display, minimum/maximum range span, scoring weights for all five factors, breakout confirmation (close vs wick), stop buffer, SL basis (opposite edge / zone mid / ATR), the three R-multiple targets, what counts as a "win" (TP1/2/3), the full institutional colour palette, transparency, label size, and dashboard position/size — all adjustable.
🎯 Why this is different — most "breakout" tools draw a box and fire an arrow the moment price pokes out, with no sense of whether the range was even worth trading or which way it should go. Strong Range Breakouts quantifies the consolidation first, predicts the direction, frames the trade, and then keeps score — so a high-grade zone with a strong bias is one to trade with, and a low-grade or counter-bias break is one to treat with suspicion. The validation behind the score even informs how you trade each one (see below).
🚀 Apply to Gold (XAUUSD), Silver, Forex, Crypto, and Indices on any intraday or higher timeframe.
🎯 How To Trade It — Quick Overview
The score decides whether a setup is worth taking; the directional bias decides which way; the levels frame the trade. In validation, high-scored ranges broke cleaner and counter-bias breaks failed more often — so play them differently.
1) Trade-With Breakout (the primary play) — use on STRONG / ELITE zones (≥7) that break with their bias
Best when a range is rated STRONG or ELITE and the breakout fires in the same direction the ▲/▼ bias predicted.
Wait for a confirmed close beyond the Buy-Stop (long) or Sell-Stop (short) line — not a single wick.
Confirmation is strongest when the break direction matches the zone's directional bias (the ~77–81% edge).
Entry: on the close beyond the stop level, or on a retest of the broken edge (broken top flips to support; broken bottom flips to resistance).
Stop: the projected SL (opposite range edge / zone mid / ATR — your choice).
Targets: TP1 first (in testing TP1 hit by far the most often — bank or de-risk there), then trail toward TP2 / TP3 as the move extends.
Use the Buy/Sell breakout alert to catch the trigger the moment a graded range gives way.
2) Fade the False Break — use on WEAK / MODERATE zones, or breaks against a strong bias
Best when a low-scored range pokes out, or price breaks opposite to a high-confidence bias — statistically the more likely failure.
Wait for price to push just beyond the range edge and fail to hold (no decisive close beyond, momentum stalling).
Entry: on the reversal back inside the range (a close back through the broken edge).
Stop: just beyond the level that was swept — if price reclaims and holds it, the fade is wrong and it's a real breakout.
Targets: the opposite range edge first, then the measured range height.
Rule of thumb: ⭐ STRONG/ELITE + break with bias → trade the breakout. ⭐ WEAK/MODERATE, or break against a strong bias → suspect a trap, fade it. Let the dashboard win-rate on your symbol tell you which behaviour is paying on the instrument you actually trade.
⚠️ IMPORTANT NOTICE: This indicator power-ranks consolidations, predicts likely breakout direction, and frames breakout-vs-fade scenarios. It should NOT be used as a standalone signal for entering trades. The dashboard statistics are measured on historical, closed-bar data and describe past behaviour only. Always combine it with your own strategy, price-action analysis, and risk management to confirm setups. Past statistical behaviour does not guarantee future results. Indicator
Strong PDH PDL Zones | ProjectSyndicateStrong PDH PDL Zones
Strong PDH PDL Zones power-ranks the daily levels that price keeps reacting to. For every session it plots the prior day's High, Low, and Golden Pocket (the 50–61.8% retracement of the previous day's range) as clean equal-height zones, then scores each High and Low 0–10 from real, measurable level quality — so you instantly know which previous-day level is likely to hold and which is likely to break. It also projects Sweep Trap and Price Breakout lines above PDH and below PDL to frame liquidity grabs and genuine breakouts.
🎯 Power-Ranking System (0–10) — every PDH and PDL earns a live grade from five sign-stable, data-validated factors: prior-day volume vs its baseline, range significance vs ADR, the rejection candle (how far price closed off the extreme), distance from round numbers (levels sitting on round numbers get swept more, so they score lower), and isolation (levels clustered with recent days' extremes break more). The model was prototyped and validated across FX and metals datasets — low-scored levels reacted far less often than high-scored ones, so the number reflects genuine edge, not decoration.
🏷️ In-Zone Strength Labels — each level carries its grade inside the band: stars, the X.X/10 score, and a tier (FORMING → WEAK → MODERATE → STRONG → ELITE). Quality reads instantly without a separate panel.
📐 Previous Day Golden Pocket — the prior session's 50–61.8% fib zone, plotted automatically as the high-probability mean-reversion pocket where intraday pullbacks so often stall.
🚧 Sweep Trap & Price Breakout Lines — two dashed levels above the PDH and two below the PDL. The amber Sweep Trap sits just beyond the level to mark the stop-hunt / liquidity-grab zone; the red Price Breakout sits further out to mark where a move becomes a real breakout rather than a wick. Both are fully offset-adjustable in ATR terms.
⚙️ Uniform ATR Zone Height — every zone (High, Low, Golden Pocket) is normalized to one identical ATR-based thickness, centered on its level, for a clean and consistent look on any instrument or timeframe.
🎨 Strength-Shaded Fill — stronger levels render sharper and more opaque while weak ones stay faint, so the chart shows which levels carry weight before you even read the score.
🧹 Score Filter — hide every level below a score threshold so the chart only carries the levels that earned their place.
🔒 Non-Repainting — each day's levels and scores lock in from the completed prior session and never change intraday. Zones span exactly one session and close cleanly at the day boundary — no bleed into the next session.
🔔 Native Alerts — touch alerts for the PDH zone, PDL zone, and Golden Pocket, plus dedicated alerts for touches of STRONG (≥7/10) PDH and PDL levels, so you never miss a high-quality interaction.
🔧 Fully Customizable — scoring weights and normalizers, zone height, golden-pocket fib bounds, sweep/breakout offsets, colors, transparency, label text and size, and round-number step — all adjustable.
🎯 Why this is different — most "previous day high/low" tools draw three equal-weight lines and leave you to guess which one matters. This one quantifies each level from real prior-day behavior and tells you the probability-weighted answer: a STRONG/ELITE level is one to fade, a WEAK level is one that's likely to give way. The validation work behind the score even informs how you trade each level (see below).
🚀 Apply to Gold (XAUUSD), Silver, Forex, Crypto, and Indices on any intraday timeframe.
🎯 How To Trade It — Two Approaches
The score is the filter that decides which approach fits. In validation, high-scored levels rejected far more often and low-scored levels broke more often — so play them differently.
1) Break → Sweep Trap → Reversal (fade the trap) — use on STRONG / ELITE levels (≥7)
Best when the PDH or PDL is rated STRONG or ELITE — statistically these are the levels most likely to hold.
Wait for price to push through the previous-day level and tag the amber Sweep Trap line beyond it (the liquidity grab that takes stops).
Look for failure to reach or hold the red Price Breakout line — i.e. the move stalls inside the trap band and prints rejection back through the level.
Entry: on the reversal back inside the level (a close back below PDH / above PDL).
Stop: just beyond the Price Breakout line — if price reaches it, the trap thesis is wrong and it's a real breakout.
Targets: the Golden Pocket first, then the opposite previous-day level.
Use the Touch STRONG PDH/PDL alert to get notified the moment a high-grade level is being tested.
2) High-Volume Breakout → Trade With the Move — use on WEAK / MODERATE levels
Best when the level is rated WEAK or MODERATE (or formed on low prior-day volume) — these are the levels most likely to break.
Wait for a decisive break of the PDH or PDL that closes beyond the red Price Breakout line on expanding volume (not a single wick).
The Sweep Trap line being cleared and held is your confirmation that it's a genuine breakout, not a stop-hunt.
Entry: in the direction of the breakout on the close beyond the Price Breakout line (or on a retest of the broken level).
Stop: back inside the level, beyond the Golden Pocket.
Targets: measured-move / next session's range, trailing as the move extends.
A broken PDH flips to support, a broken PDL flips to resistance — the old level often becomes the retest entry.
Rule of thumb: ⭐ STRONG/ELITE → expect a reaction, trade the trap reversal. ⭐ WEAK/MODERATE on volume → expect follow-through, trade the breakout.
⚠️ IMPORTANT NOTICE: This indicator identifies high-probability previous-day levels and frames trap vs breakout scenarios. It should NOT be used as a standalone signal for entering trades. Always combine it with your own strategy, price-action analysis, and risk management to confirm setups. Past statistical behavior does not guarantee future results. Indicator
Strong Geometric Patterns Engine | ProjectSyndicateStrong Geometric Patterns Engine automatically detects, validates, and grades nine classic chart patterns using an objective, non-repainting geometry engine. It confirms every signal on a breakout close, projects adaptive measured-move take-profit and structural stop-loss levels scaled to Average Daily Range (ADR), scores each setup 0–10 for quality, and presents a full statistical breakdown on a non-intrusive dashboard to provide a quantifiable edge.
🧠 9-Pattern Geometric Detection — identifies Head & Shoulders, Inverse Head & Shoulders, Double Top, Double Bottom, Ascending / Descending / Symmetrical Triangles, and Rising / Falling Wedges from a non-repainting confirmed-pivot engine, so signals are stable and never redraawn after the fact.
🔒 Breakout-Confirmed, Non-Repainting — a valid shape only sets a pending setup; the signal fires exclusively when price closes through the pattern's trigger level, eliminating the subjective, repainting behaviour of standard ZigZag and pattern tools.
🎯 ADR-Adaptive Measured-Move TP/SL — TP1, TP2, and SL are derived from the pattern's own projected height (a true measured move), bounded by a percentage of the 10-day ADR, so risk and targets adapt automatically to any asset's volatility instead of using fixed points.
⭐ 0–10 Quality Scoring — every setup is graded on symmetry, convergence, and a volume confirmation bump, displayed as a star rating next to each signal so you can instantly gauge setup strength and filter for the best ones.
🎨 Direction-Matched Visuals — clean upward/downward entry markers, green bullish and red bearish labels, and crisp horizontal SL / TP1 / TP2 levels give instant visual confirmation of trade direction with no chart clutter.
📊 Full Performance Dashboard — a complete statistical overview including the real-time ADR10 value, the active/pending setup with its targets, total signals, TP1/TP2 win rates, a per-pattern breakdown across all nine pattern types, and a log of the most recent trade outcomes.
✅ Advanced Quality-Control Filters — user-configurable Pivot Length, equality/slope/convergence tolerances, min & max pattern span, measured-move bounds, and minimum bars between signals eliminate low-quality or oversized patterns and prevent over-signaling.
🔔 Comprehensive Alerts — get alerted the moment a new pattern is detected (pending), when price is approaching the trigger, when a setup confirms on the breakout, or only on strong high-score patterns. Available as a single rich alert() message (symbol, timeframe, trigger, invalidation, entry, SL, TP1, TP2, quality) for automation, plus six individually selectable named alert conditions.
🔧 Fully Customizable — control everything from pivot length and pattern-quality tolerances to colors, level extension, persistent historic levels & labels, adjustable signal label size, and dashboard text size.
🎯 Why this algo is unique: Standard pattern indicators repaint and offer subjective signals with no statistical backing. This is an objective, fully-gated, non-repainting engine that doesn't just draw a pattern — it recognizes nine of them from raw geometry, confirms them on a breakout, builds a complete adaptive risk framework (measured-move, ADR-bounded zones) around each one, grades its quality, and proves its historical performance on the very chart you're trading.
🚀 Apply to Gold (XAUUSD), Forex, Crypto, and Indices on any M5/M10/M15/M30/H1. The ADR-based, self-scaling geometry and extensive quality filters let it adapt to anything from M5 scalping to H4 swing trading.
🎯 How to use this? Use the dashboard to understand how each pattern type has recently performed on the current asset and timeframe. Favour higher-quality (higher-star) setups and those aligned with the higher-timeframe trend. Tune the pattern tolerances and measured-move multipliers to match your own risk tolerance and the asset's character.
⚠️ IMPORTANT NOTICE: This indicator is designed to identify statistically-backed pattern signals. It should NOT be used as a standalone signal for entering trades. Always use it in conjunction with your own trading strategy, price action analysis, and other technical indicators to confirm setups and manage risk. Indicator
Strong Session SD Zones | ProjectSyndicateStrong Session SD Zones
Strong Session SD Zones automatically maps and power-ranks the session-based supply & demand zones that price keeps reacting to. It tracks each zone through its full life — formation, tests, breakout, and invalidation — scores it 0–10 from real interaction, and retains every session's zones for the last N sessions, so you can see exactly which levels each Asia / London / New York session left behind.
🎯 Power-Ranking System (0–10) — every zone earns a live score from four things: the impulse of the move that created it, the volume traded while it formed, the depth of the rejection wicks off it, and its freshness (how unmitigated it still is). An idle-decay lets ignored zones fade while respected ones stay strong, so the score always reflects current relevance.
🕐 Session-Aware Zones — instead of one undifferentiated cluster of levels, zones are batched by trading session and each one is tagged with where it was born (Asia, London, NY, Late). Pick Daily, Asian, London, New York, or a custom session as the boundary that starts each new batch.
🔁 Hold vs Broken States — each zone is shaded by type (supply = red, demand = green) and re-shaded the moment price invalidates it, with a ✗ marker on broken zones. You see at a glance whether a level is still defending or has flipped.
🎨 Strength-Sharpened Fill — strong zones render sharp and opaque while weak ones stay faint, so the chart visually shows which levels carry weight before you even read the score.
🏷️ In-Zone Strength Labels — every zone carries its grade inside it: stars, the X.X/10 score, a tier (FORMING → WEAK → MODERATE → STRONG → ELITE), the live retest count (R:), and its session — quality reads instantly without a separate panel.
🧹 Overlap Suppression — when a new zone would stack on an existing same-session zone, the two are merged into one clean band instead of cluttering the area, so each price region shows a single level.
⭐ Strong-Only Filter — hide everything below a score threshold; weak zones that never earn the score are discarded rather than kept, so the chart only carries proven levels.
🔔 Comprehensive Native Alerts — proximity alerts for supply and demand zones, a dedicated STRONG-zone proximity alert (configurable, e.g. 7/10+), plus new-supply and new-demand formation events, so you never miss a key level interaction.
⚙️ Uniform Zone Height — normalize every zone to one ATR-based thickness for a clean, consistent look, with a minimum-swing filter that ignores insignificant pivots.
🚦 Performance Guards — a sessions-to-display window and a max-zones-kept cap keep load times fast on long histories; retired zones are fully removed, not just hidden.
🔧 Fully Customizable — color palette, transparency, borders, label size, scoring weights, pivot sensitivity, max zones per session, decay settings, and invalidation method (close vs wick) — all adjustable.
🎯 Why this algo is unique — standard pivot tools flood the chart with equal-weight lines. Strong Session SD Zones filters, merges, and ranks them by session, then keeps only the zones that have proven they matter. It doesn't just show where a level was — it quantifies how strong it is from real interaction (impulse, volume, rejection, freshness), giving you a clear read on which zones are holding and which are likely to break.
🚀 Apply to Gold (XAUUSD), Forex, Crypto, and Indices on any timeframe. Pivot sensitivity, zone height, sessions shown, and the strong threshold adapt it from scalping to swing trading.
🎯 How to use this? Focus on zones rated 7/10 or higher — these have the highest probability of producing a significant reaction. Watch the hold-vs-broken state to judge whether a level is defending or has flipped, and use the proximity and strong-zone alerts to prepare entries or exits.
⚠️ IMPORTANT NOTICE: This indicator identifies high-probability supply & demand zones. It should NOT be used as a standalone signal for entering trades. Always use it alongside your own trading strategy, price action analysis, and other technical indicators to confirm setups and manage risk. Indicator
Strong Retest Zones | ProjectSyndicateStrong Retest Zones automatically maps and power-ranks the swing-based levels that price keeps reacting to. It tracks each level through its full life — formation, tests, breakout, and retest — scores it 0–10 from real interaction, and shows only the zones that earn their place, keeping the chart clean and focused on levels that matter.
🎯 Power-Ranking System (0–10) — every zone earns a live score from three things: how many times it's been tested/retested, the volume traded while it was active, and the depth of the rejection wicks off it. An idle-decay lets ignored levels fade while respected ones stay strong, so the score reflects current relevance.
🔁 Double-Shaded Break & Retest Zones — each level is drawn in two tones: one shade while it holds, a contrasting shade once price breaks through. You see at a glance whether a zone is still defending or has flipped.
🏷️ In-Zone Strength Labels — every zone carries its grade inside it: stars, the X.X/10 score, a tier (FORMING → WEAK → MODERATE → STRONG → ELITE), and the live retest count (R:) — quality reads instantly without a separate panel.
🧹 Overlap Suppression — when a new zone would stack on top of an existing one, it's skipped so each price area shows a single clean level instead of a cluster.
⭐ Strong-Only Filter — hide everything below a score threshold (default 5/10); weak zones that never earn the score are discarded rather than kept, so the chart only carries proven levels.
🔔 Comprehensive Native Alerts — proximity alerts for bullish and bearish zones, dedicated STRONG-zone proximity alerts (configurable, e.g. 7/10+), plus touch/retest and break events, so you never miss a key level interaction.
⚙️ Uniform or Natural Zone Height — normalize every zone to one ATR- or %-based thickness for a clean look, or anchor to the raw swing.
🚦 Performance Guards — a lookback window and a max-zones-kept cap keep load times fast on long histories; retired zones are fully removed, not just hidden.
🔧 Fully Customizable — std-dev color palette, transparency, borders, label size (Large by default), marker mode, scoring weights, pivot sensitivity, and max levels shown — all adjustable.
🎯 Why this algo is unique — standard pivot tools flood the chart with equal-weight lines. Strong Retest Zones filters, dedupes, and ranks them, then keeps only the levels that have proven they matter. It doesn't just show where a level was — it quantifies how strong it is from real interaction (touches, volume, rejection), giving you a clear read on which levels are holding and which are likely to break.
🚀 Apply to Gold (XAUUSD), Forex, Crypto, and Indices on any timeframe. Pivot sensitivity, zone height, lookback, and the strong threshold adapt it from scalping to swing trading.
🎯 How to use this? Focus on zones rated 7/10 or higher — these have the highest probability of producing a significant reaction. Watch the two-tone state to judge whether a level is holding or has flipped, and use the proximity and strong-zone alerts to prepare entries or exits.
⚠️ IMPORTANT NOTICE: This indicator identifies high-probability retest zones. It should NOT be used as a standalone signal for entering trades. Always use it alongside your own trading strategy, price action analysis, and other technical indicators to confirm setups and manage risk. Indicator
Confluence Order Blocks | ProjectSyndicateConfluence Order Blocks automatically identifies and validates high-probability, non-repainting Order Blocks. It filters for structural quality using displacement, normalizes all zone heights for consistency, and embeds a live multi-timeframe confluence engine inside every zone to provide a quantifiable, data-driven edge.
🧠 Live Multi-Timeframe Engine — This is not a single-timeframe tool. Every OB zone displayed on the chart is the result of a live, proximity-based confluence engine scanning three independent higher timeframes (e.g., M15, M30, H1) simultaneously. Each label shows exactly how many timeframes confirmed the zone, its composite strength rating (0-10), the session it formed in, its age, and its exact pip height, giving you an instant structural edge.
🎯 Displacement-Confirmed OBs — The engine doesn't just mark swing points. It validates each OB on the higher timeframes by requiring a powerful move away from the candle — a "displacement" — that is a user-defined multiple of the zone's range. This filters out weak or insignificant zones and focuses only on OBs that have demonstrated true market-moving intent before they are even considered for merging.
🎨 ATR-Normalized Zones — Eliminates visual noise from inconsistent zone sizes. This feature forces every merged OB zone to a uniform, ATR-based height (e.g., 0.75x ATR). This provides a clean, consistent chart and allows for a more objective analysis of price interaction with zones of equal visual weight, preventing massive tower blocks from distorting the chart.
📊 Proximity-Based Merging — Timeframes rarely align perfectly to the pip. The confluence engine uses an intelligent ATR-based proximity tolerance (e.g., 2.0x ATR) to detect when order blocks from different timeframes are clustered in the same price territory. It then mathematically merges them into a single, high-probability "Confluence Zone," ensuring you don't miss valid setups due to minor price discrepancies across timeframes.
✅ Chart-Timeframe Independent — The engine's credibility comes from its architectural stability. Unlike standard MTF indicators that repaint or shift zones depending on the chart you are viewing, this engine runs a completely stateless detection algorithm. The merged zones you see on an M1 chart are mathematically identical to the zones you see on an M5 or M15 chart.
🔧 Fully Customizable — Control every aspect of the engine, including the 3 target timeframes, the Minimum Timeframe Confluence threshold (e.g., require 3 out of 3 TFs), the Proximity Tolerance multiplier, the Minimum Strength Filter, and the colors/visibility of Bullish and Bearish zones.
🔬 Why this algo is unique: Standard Order Block indicators are subjective — often just drawing boxes on the current timeframe's last up/down candle before a swing, with no proof of higher-timeframe alignment. The Confluence OB Engine transforms this subjective tool into an objective, multi-dimensional trading instrument. It doesn't just show you a zone; it proves that the zone is backed by institutional intent across multiple timeframes, merging them into a single, undeniable area of interest on the exact chart you are viewing.
🌐 Apply to Gold (XAUUSD), Indices (US30, NAS100), Forex Majors, and Crypto on M1 or M5 execution timeframes while tracking M15, M30, and H1 structures. The engine is designed for assets that exhibit clear swing structures and respect deep supply/demand dynamics.
🗂️ How to use this? The most critical metric is the Timeframe Confluence Count and the Strength Rating. A zone confirmed by 3 timeframes with a Strength of 8.0+ indicates a massive structural edge. Consider only taking trades from these high-confluence zones that align with the prevailing higher-timeframe trend. The embedded label also shows the exact "pips away" distance, allowing for precise limit order placement.
⚙️ IMPORTANT NOTICE: This indicator is a professional-grade tool designed to identify structural confluence. It should NOT be used as a standalone signal for entering trades blindly. Always use it in conjunction with your own trading strategy, price action analysis, and strict risk management to confirm trade setups. Indicator
Strong Gold Breakouts M5 | ProjectSyndicate⚙️ Gold short-term entries off M5 timeframe using dynamic consolidation zones with ADR-based TP targets.
📦 Advanced Consolidation Structure: The indicator detects and plots high-probability consolidation zones using a multi-dimensional 0–10 scoring algorithm. Only the strongest zones (score 6+) that span at least 10 candles are displayed, providing a robust breakout structure based on pure price compression. This is the default setting and is designed for intraday trading.
🎯 Precision Entry & Exit Levels: A color-coded consolidation box is plotted, with Buy Stop and Sell Stop dashed lines automatically placed 2 USD away from its borders. This buffer creates a neutral zone and helps filter out fakeouts.
💰 ADR-Based Profit Targets: Three Take Profit (TP) lines are plotted for both long and short trades (TP1, TP2, TP3). These levels are dynamically calculated as a percentage of the 10-day Average Daily Range (ADR), ensuring targets adapt to current market volatility.
⚙️ Fully Customizable Levels: Every element is adjustable. You can change the buffer between the consolidation box and stop lines, and customize the exact ADR percentages for TP1 (10%), TP2 (15%), and TP3 (20%) to suit your risk profile.
🔔 M5 Breakout Alerts: The indicator includes a powerful alerts module that triggers when an M5 candle closes above the Buy Stop level or below the Sell Stop level. This provides real-time notifications with full trade details for potential entries.
🎨 Clean Visuals & Clear Labels: The zones are color-coded based on strength — White=6, Yellow=7, Orange=8, Red=9–10 — for instant recognition. The Buy Stop, Sell Stop, and TP lines are fully labeled with exact price levels, ensuring zero confusion.
⚙️ Trading Strategy & Logic
This strategy is designed for precision and requires patience. The core idea is to wait for the market to confirm a breakout of an established high-scoring consolidation zone before entering a trade.
📌 Entry Logic
🕒 Wait for a Strong Zone: Allow the indicator to detect and plot a new high-scoring consolidation zone. Do not trade old or expired zones.
🔔 Set Your Alerts: In PulseWire, create a new alert and select the indicator. For the condition, choose "Any alert() function call". This will notify you the moment an M5 candle closes across a stop level.
👀 Wait for the M5 Close: For a Long Buy Trade, wait for an M5 candle to close above the Buy Stop line. For a Short Sell Trade, wait for an M5 candle to close below the Sell Stop line.
✅ Enter on Confirmation: Once you receive the alert and visually confirm the M5 candle has closed past the level, you can enter the trade targeting the dynamic ADR levels. Indicator
Strong Pinbar Reversals MTF | ProjectSyndicateStrong Pinbar Reversals MTF automatically identifies and power-ranks high-probability reversal opportunities by analyzing clusters of institutional pinbar rejections. It filters for quality, calculates a 0-10 strength score for every reversal cluster based on wick purity, cluster density, and candle momentum, and presents all data on the chart and in a comprehensive multi-timeframe dashboard to eliminate noise and focus on reversals that matter.
• 🎯 Power-Ranking System (0-10) — every pinbar cluster is given a strength score based on a strict 5-dimensional algorithm that assesses cluster size, average wick purity, minimum wick purity, candle range versus ATR, and time density, providing an instant quality assessment.
• 🎨 Strength-Based Color Scheme — reversal zones are colored by their power rank; stronger clusters get darker, more prominent colors for immediate visual hierarchy.
• 🧠 Smart Context Detection — automatically ensures that bullish pinbar clusters only fire at local price lows (support) and bearish clusters only fire at local price highs (resistance), completely filtering out fake signals in mid-range consolidation.
• 📊 On-Chart Statistics — each reversal zone displays its direction (Bullish/Bearish) and its calculated strength score directly inside the shaded zone.
• 🧭 Full MTF Dashboard Display — provides a complete market overview across 7 timeframes (M1, M5, M15, M30, H1, H4, D1), showing the latest reversal signal, its strength, entry/SL/TP levels, and how many bars ago it occurred on that timeframe. The dashboard uses persistent state memory, meaning it is perfectly stable and consistent regardless of the chart you are viewing.
• 🔔 Comprehensive Alerts — get notified the moment a new high-strength cluster occurs, with the alert message containing the full details: direction, strength, entry, SL, and TP levels.
• ✅ Quality Control Filters — a user-configurable minimum strength score (default 6.0) allows you to filter out weak, low-probability wicks and focus only on institutional-grade reversal clusters.
• 🔧 Fully Customizable — control everything from the minimum wick percentage and cluster lookback window to the ADR multipliers for universal zone height and SL/TP placement.
• 🎯 Why this algo is unique: Standard pinbar indicators look at single candles and generate massive amounts of false signals in consolidation. This algorithm looks for clusters of rejection (e.g., 3+ pinbars in a tight window) and uses a multi-factor scoring system to quantify the quality of the rejection. It doesn't just show you a wick; it tells you how strong the institutional absorption is. The MTF dashboard provides a complete, stable cross-timeframe perspective that is impossible to achieve with standard single-timeframe indicators.
• 🚀 Apply to Gold (XAUUSD), Forex, Crypto, and Indices on any timeframe. The wick percentage and cluster size settings allow it to adapt to anything from scalping (M1/M5) to swing trading (H4/D1).
• 🎯 How to use this? Focus on trading opportunities from high-strength reversal clusters rated 7/10 or higher, as these show the highest probability of a structural shift. Use the dashboard to quickly identify which timeframes have active rejection zones, and look for alignment between lower timeframe clusters and higher timeframe support/resistance.
• ⚠️ IMPORTANT NOTICE: This indicator is designed to identify high-probability reversal opportunities based on price action rejection. It should NOT be used as a standalone signal for entering trades. Always use it in conjunction with your own trading strategy, market structure analysis, and other technical indicators to confirm trade setups and manage risk. Indicator
Institutional Order Zones | ProjectSyndicateInstitutional Order Zones automatically identifies and power-ranks high-probability institutional zones by analyzing market compression events and explosive breakout candles. It filters for quality, calculates a SCORE for every zone based on its formation dynamics and historical interaction, and presents all data on the chart and in a comprehensive dashboard to eliminate clutter and focus on levels that matter.
• 🎯 Proprietary Three-Engine Architecture — the algorithm does not use generic pivots or standard support/resistance detection. Engine 1 (Order Compression) identifies statistically quiet consolidation periods using ATR percentile compression and linear regression slope neutrality. Engine 2 (Institutional Breakout) detects the institutional breakout candle — body and volume must both spike simultaneously above statistical thresholds. Engine 3 (Zone Scoring) assigns every zone a score from 0-100 based on Breakout Strength (40pts), Order Compression Duration (30pts), and Post-Breakout Momentum (30pts).
• 🎨 Score-Based Visuals — zones are color-coded into three tiers based on their 0-100 score. STANDARD (0-34): purple-magenta resistance / bright teal support. STRONG (35-64): dark red resistance / medium teal support. INSTITUTIONAL (65-100): deep pink resistance / dark teal support. Higher-tier zones automatically receive a thicker border and centerline for instant visual priority.
• 🧠 Advanced Zone Management — zones are dynamically updated on every bar. A price rejection adds +10 to the zone score and promotes its status to VALIDATED. A price breach subtracts -20 and marks the zone as VIOLATED. Violated zones can be hidden or shown via a toggle input.
• 📈 Detailed On-Chart Markup — every zone is plotted with a label anchored inside the shaded area: TIER | Sc:xx.x | STATUS | Dis:xx.x% | Dur:nb | Rej:n Brc:n. This shows the zone tier, composite score, current status (NEW / VALIDATED / VIOLATED), the breakout dislocation strength as a percentage, the consolidation duration in bars, and the full rejection and breach history.
• 🧭 Comprehensive Dashboard Display — get a complete market overview without leaving your chart. The Zone Rankings panel shows the nearest Resistance and Support zones ranked by proximity, with price, tier flag, score, and pip distance per row. The Market Stats panel shows the current session, daily range vs 10-day ADR, volatility state (LOW / NORMAL / HIGH), and the total count of active Institutional-grade zones on each side.
• 🔔 Comprehensive Alerts — get an alert whenever price enters proximity of a Standard zone, a Strong zone, or an Institutional zone, with separate alert conditions for resistance and support so you can filter exactly what matters to your setup.
• ✅ Quality Control Filters — user-configurable inputs for ATR percentile threshold, slope neutrality tolerance, minimum compression duration, body multiplier, and volume multiplier allow for deep customization. Tighten the thresholds for fewer, higher-quality zones. Loosen them for broader coverage on lower timeframes.
• 🔧 Fully Customizable — control everything from the max number of zones shown, lookback period, zone width percentage, and extend-right bars to the text size of all labels, dashboard size, and individual zone colors.
• 🎯 Why this algo is unique: Standard supply/demand or FVG indicators rely on simple pattern recognition (gap between candles, pivot highs/lows). This algorithm quantifies the underlying market state that precedes institutional moves. It measures the quality of the compression that created the zone and the statistical significance of the breakout that validates it. Every zone has a score you can trust, not just a visual box.
• 🚀 Apply to Gold (XAUUSD), Forex, Crypto, and Indices on any timeframe. The ATR-based detection and zone width settings allow it to adapt to anything from M5 scalping to D1 swing trading.
• 🎯 How to use this? Use the dashboard to identify the strongest, closest zones. Focus on price action around INSTITUTIONAL-tier zones (Score >= 65) that align with your higher-timeframe bias. Use the alerts to know when price is approaching a key level so you are never caught off guard.
• ⚠️ IMPORTANT NOTICE: This indicator is designed to identify high-probability institutional order zones. It should NOT be used as a standalone signal for entering live trades. Always use it in conjunction with your own trading strategy, price action analysis, and other technical indicators to confirm trade setups and manage risk.
Indicator
