Profit

Grid Settings & MM This script is designed to help you plan your grid trading or when averaging your position in the spot market. The script has a small error (due to the simplification of the code), it does not take into account the size of the commission. You can set any values on all parameters on any timeframe, except for the number of orders in the grid (from 2 to 5). The usage algorithm is quite simple: 1. Connect the script 2. Install a Fibo grid on the chart - optional (settings at the bottom of the description) 3.On the selected pair, determine the HighPrice & LowPrice levels and insert their values 4.Evaluate grid data (levels, estimated profit ’%’, possible profit ‘$’...) And it's all) Block of variables for calculating grid and MM parameters Variables used regularly --- HighPrice and LowPrice - constant update when changing pairs --- Deposit - deposit amount - periodically set the actual amount Variables that do not require permanent changes --- Grids - set the planned number of grids, default 5 --- Steps - the planned number of orders in the grid, by default 5 --- C_Order - coefficient of increasing the size of orders in the base coin, by default 1.2 --- C_Price - trading levels offset coefficient, default 1.1 --- FirstLevel - location of the first buy level, default 0.5 --- Back_HL - number of candles back, default 150 *** For C_Order and C_Price variables, the value 1 means the same order size and the same distance between buy levels. The fibo grid is used for visualization, you can do without it, ! it is not tied to the script code ! You can calculate the levels of the Fibo grid using the formula: (level price - minimum price) / (maximum price - minimum price) For default values, grid levels are as follows: 1 ... 0.5 2...0.359 3 ... 0.211 4...0.0564 5...-0.1043 Short description: in the upper right corner --- indicator of the price movement for the last 150 candles, in % !!! there is no task here to "catch" the peak values - only a relative estimate. in the upper left corner --- total amount of the deposit --- the planned number of grids --- “cost” of one grid --- the size of the estimated profit depending on the specified HighPrice & LowPrice in the lower left corner --- Buy - price levels for buy orders --- Amount - the number of purchased coins in the corresponding order --- Sell - levels of profit taking by the sum of market orders in the grid --- $$$ - the sum of all orders in the grid, taking into account the last active order --- TP - profit amount by the amount of orders in the grid

Indicator

Inverse MACD + DMI Scalping with Volatility Stop (By Coinrule)This script is focused on shorting during downtrends and utilises two strength based indicators to provide confluence that the start of a short-term downtrend has occurred - catching the opportunity as soon as possible. This script can work well on coins you are planning to hodl for long-term and works especially well whilst using an automated bot that can execute your trades for you. It allows you to hedge your investment by allocating a % of your coins to trade with, whilst not risking your entire holding. This mitigates unrealised losses from hodling as it provides additional cash from the profits made. You can then choose to hodl this cash, or use it to reinvest when the market reaches attractive buying levels. Alternatively, you can use this when trading contracts on futures markets where there is no need to already own the underlying asset prior to shorting it. ENTRY The trading system uses the Momentum Average Convergence Divergence (MACD) indicator and the Directional Movement Index (DMI) indicator to confirm when the best time is for selling. Combining these two indicators prevents trading during uptrends and reduces the likelihood of getting stuck in a market with low volatility. The MACD is a trend following momentum indicator and provides identification of short-term trend direction. In this variation it utilises the 12-period as the fast and 26-period as the slow length EMAs, with signal smoothing set at 9. The DMI indicates what way price is trending and compares prior lows and highs with two lines drawn between each - the positive directional movement line (+DI) and the negative directional movement line (-DI). The trend can be interpreted by comparing the two lines and what line is greater. When the negative DMI is greater than the positive DMI, there are more chances that the asset is trading in a sustained downtrend, and vice versa. The system will enter trades when two conditions are met: 1) The MACD histogram turns bearish. 2) When the negative DMI is greater than the positive DMI. EXIT The strategy comes with a fixed take profit combined with a volatility stop, which acts as a trailing stop to adapt to the trend's strength. Depending on your long-term confidence in the asset, you can edit the fixed take profit to be more conservative or aggressive. The position is closed when: Take-Profit Exit: +8% price decrease from entry price. OR Stop-Loss Exit: Price crosses above the volatility stop. In general, this approach suits medium to long term strategies. The backtesting for this strategy begins on 1 April 2022 to 18 July 2022 in order to demonstrate its results in a bear market. Back testing it further from the beginning of 2022 onwards further also produces good returns. Pairs that produce very strong results include SOLUSDT on the 45m timeframe, MATICUSDT on the 2h timeframe, and AVAUSDT on the 1h timeframe. Generally, the back testing suggests that it works best on the 45m/1h timeframe across most pairs. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance.

Strategy

Yearly Percentage Returns An indicator that lets you visualize the historical Yearly Percentage returns of any symbol . Key Features: Displays the yearly returns from start to end of each year Displays a table showing all yearly returns for current symbol Displays start of each year as a vertical line Displays up to 5 custom horizontal levels Table Settings: Enable table - Show/Hide the table Size - Sets the size of the table Position - Sets the position of the table on the screen Direction - Sets the direction of the table to display the data (Vertically or Horizontally)

Indicator

All Time Low This script is to remind you of how much you would lose if the price went down to the all time low. This will make you think twice about your purchases!

Indicator

Sell Half On Double Notes: - In settings leave 0 for actual price, or set a new price and the SHOD levels will change too.

Indicator

Profit Reminder This is a Visual Indicator intended to be a reminder to those who need it! This indicator allows you to set a profit level and displays the calculated values if you were to profit that amount each day. The vision of this indicator is to get the user more green trades by reminding them to get out while they're ahead, because there are more days ahead! It also allows for the user to set phrases that might help them with this. Look forward to what's ahead and don't get caught up in over trading!

Indicator

Position Sizing Calculator This is an intuitive risk management tool with a minimalist design. This calculator will determine your position size per trade, profit, loss, risk/reward ratio and leverage if any. It will calculate your leverage if you are trading financial instruments e.g. Mini Futures , Turbo Warrants etc. that have a financing level. Tip: Use this as a complement to the Long/Short Position tool. Provide the following inputs to get a calculation: - Position type - Account balance - Risk per trade percentage - Financing level (if any for leveraged instruments), else let it be 0 - Entry price - Target price - Stopp loss price You can also choose the color of the output text, its background and position in the chart window. Enjoy!

Indicator

Financial Growth This indicator will acquire the financial data provided by Tradview. the data is compare between Quarter, Annual and TTM in term of percent of growth. YoY, QoQ and CAGR is also available by this script (The minimum is 4). in addition, ploting of data, label and table also available (you can check the mark to toggle on / off). Data : Revenue, Net Income, EBITDA, EPS, DVPS, Free Cash Flow and Forward PE . How to use it. just select the financial data, period and size of data to compare. you can check the box to toggle the plotting line, label and table. Enjoy.

Indicator

Bias Pivot Point A simple indicator that uses Pivot Points as a filter and to generate a Directional Bias . How to use this indicator? 1. Directional Bias Bullish => Closing Price > Pivot Point Bearish => Closing Price < Pivot Point 2. Support / Resistance Each Pivot Points can be used as Support or Resistance 3. Take Profit Targets Each Pivot Points can be used as targets for taking profit

Indicator

Risk Assist As the profit level increases, the amount of profit taking required to avoid risk asymptotically reaches zero. This indicator displays the % of the established position required to exit in order to ensure the trade is not a loss if the stop is hit. Values in green (at or below 100%) indicate a winning position. Values in red (above 100%) indicate a losing position. Alert Examples: If you are intent on "selling half" to avoid risk, you can set an alert on the value of this indicator for 50. If you are intent on "selling a 3rd" to avoid risk, you can set an alert on the value of this indicator for 33.3.

Indicator

Trailing Stop Alerts This script is designed as an ATR-based trailing stop tool to assist in managing open positions. Once you're involved in a profitable trade, if you add this script to your chart you'll be prompted to select a bar to begin trailing from. You can then adjust the candle lookback distance for swing high/lows (7 by default), the ATR multiplier (1.0 by default), and the direction to trail (Long/Short). You can also adjust the ATR period in the settings menu if you want to (14 period by default). Once the script is added to your chart, it will begin drawing your trailing stop and you can then set up alerts. Alert Options: Any alert() function call : Will trigger an alert for both conditions (trailing stop updated, trailing stop hit) Alert Conditions : Trailing Stop Update will trigger whenever the stop is updated, Trailing Stop Hit will trigger whenever the stop is hit. Note: the alerts will only fire once per bar close and the trailing stop will not update on realtime bars.

Indicator

by ZenAndTheArtOfTrading

GenericTrading Library "GenericTrading" This library aims to collect rare but useful operations for get_most_recent_long_or_short_position_closed_index() : returns most recent long/short closed bar index. get_most_recent_long_or_short_position_open_index() : returns most recent long/short closed bar index. These two functions designed to help to speed up the coding for strategies that contains "re-enter" logic. These two functions also could applies in the situations where time-count is needed in your condition.

Library

by BillionaireLau

Fibonaci Opening Range Candle Fibonacci Opening Range it is 50% and 0.61% of 5 min or 30min or 1 hour opening candle search buying opportunities below 0.61 and selling opportunities above 0.50 Also acts as good support and resistance in intraday BEST RESULTS IN INDEXES Thanks & Best Regards Marella Ganesh

Indicator

by POWER_TRADES

Smart Alerts This indicator provides back-tested signals and alerts from multiple technical indicators. No more guessing whether or not you should trust an indicator. See your indicators' past performance at a glance. No more false alarms. Disable re-painting of signals. When multiple indicators overlap, a Confluence indicator will print (large triangle). With your settings properly tuned, this will show a HIGH probability of a move. Current Signal/Alert Options (more to come): RSI Oversold RSI Overbought EMA Crossing Up EMA Crossing Down Buy Signal Confluence Sell Signal Confluence Instructions: -Enable/disable individual indicators so you can fine tune one at a time -Adjust the indicator's settings -Adjust your trade parameters (Max Wait, Take Profit %). Signals that would have given the desired profit in the time allowed will be painted orange. -Repeat this process with each indicator until you're satisfied -Set-up alerts

Indicator

Smart EMA Signals This indicator starts by plotting each time the price action crosses above or below the EMA, of which you can tune the timeframe and duration. It then takes it a step further and plots whether or not that indicator would have given you a profitable trade, of which you can also tune the parameters (Max wait time, and % Profit). Once you have your EMA tuned to your liking, set up alerts to notify you of a golden opportunity.

Indicator

Artharjan Profit & Loss Calculator Hi, Artharjan Profit and Loss Calculator allows users to calculate Profit and Loss of their trades and see it on the chart itself Users are supposed to select either Long or Short, Enter quantity and enter traded price. The live P&L will be plotted on the chart. Happy trading :-) Rahul

Indicator

MultiAlert, MultiTargets + Tickers This is my first script, completely made from scratch. Bear with me. Script that allows one to set an alert for Multiple Price Levels, on Multiple Tickers, complete with Dynamic Messages showing you which ticker, at which price, at which alert (Stop loss, Target 1 etc.), set to Once Per Bar. Select Ticker, type in price levels that you have for targets & stop loss, move on to the next, or don't and leave 0 and blank. Disable the targets you do not need in STYLE tab to disable plotting & scaling, leave unused tickers & targets blank & 0. Create Alert, select this indicator, anyfunction() alert. MAKE SURE to remake the alert every time you change something, they are not smart enough to change as you change things. Can Confirm by using the numbers in the alert name. You will also have to set the profit level or stop loss to zero every time it triggers to avoid triggered again. In fact, you do not need the indicator active at all. Add it to a chart and hide it by clicking on the little eyeball icon, to make an alert open the settings for the indicator and type in your targets like normal. Indicator will remain invisable. I have not found a way to dynamic message the alert name, or else I would. DISCLAIMER: NONE OF THIS IS FINANCIAL ADVICE. You are completely responsible for whatever happens to you. Do not use the targets in this chart. Do your own research before trading.

Indicator

Directional Value inspired by this publication:

Indicator

by RicardoSantos

function - maximum profit A function to track maximum profit.

Indicator

by RicardoSantos

Arbitrage Sniper (POC)Good Morning Traders! Today I want to share with you the proof-of-concept of how you would be able to do arbitrage with crypto pairs. THE INDICATOR MUST BE PLACED ON THE TRADING PAIR OF THE TWO CURRENCIES (i.e. ETH/BTC, EOS/ETH etc.) This arbitrage method is based on the transitional decorrelation between the crypto treding pair and the price ratio of the involved currencies, of course computing commissions as well. Whenever the non-arbitrage condition is not respected, there is an arbitrage oportunity. This indicator won't consider the chance of shorting, so if the arbitrage oportunity occurs the indicator will suggest you just the chance of buying the relative-undervalued currency (but inside the code you will know how to do the alternative method as well, by shorting the relative-overvalued currency) Let's take the trading pair ETH/BTC (as in the graph) → if we assume commissions for the 0.075% of the order, the non-arbitrage condition will be presented like this This arbitrage method will need three orders, so n=3 So let's assume that P(ETH)/(P(BTC)*P(ETH/BTC))>(1-0.075)^(-3) → it means that the price of Ethereum is currently overreated enough (relatively to the trading pair) for doing arbitrage. We have two alternatives: • Buy BTC, change it into ETH (by "buying" ETH in the trading pair ETH/BTC) and then sell ETH • Sell ETH, buy BTC, change it into ETH (by "buying" ETH in the trading pair ETH/BTC) On the other hand, if P(ETH)/(P(BTC)*P(ETH/BTC))<(1-0.075)^(-3) → it means that the price of Ethereum is currently underrared enough (relatively to the trading pair) for doing arbitrage. We have two alternatives: • Buy ETH, change it into BTC (by "selling" ETH in the trading pair ETH/BTC) and then sell BTC • Sell BTC, buy ETH, change it into BTC (by "selling" ETH in the trading pair ETH/BTC) I'm saying that is nothing more than a proof-of-concept since: - Arbitrage Oportunities will emerge frequently just nearly zero commissions - Data of prices are retrieved using security() function and there can be some delay (so the arbitrage oportunity will be already extinguished by the time the signal is retrieved) - In order to have the freshest data, repiainting will occurr

Indicator

Indicator - ATR Profit Loss - DG Hi Traders, This is an on chart indicator that can be used for setting take profit and stop losses very easily using the Average True Range Indicator (ATR). Using a volatility adjusted TP and SL will allow you to set your targets and losses based on market conditions. In the settings, you are able to adjust how much of a multiplier you require depending on your risk tolerance and strategy. For those that follow the NNFX method, the defult settings are preset to 1xATR TP and 1.5xATR SL. How to use: - For longs, 'isLong' box must be ticked, for shorts, this box is unticked - For longs, green line is TP, red line is SL - For shorts, red line is TP, green line is SL Regards, Dillon Grech

Indicator

by Dillon_Trades

ATR with Take and Stop This simple indicator will plot the take profit and stop loss values based on the ATR indicator. It's possible to set how many times the ATR value will be applied to the closing price and what trade type is used, Long or Short.

Indicator

by ThiagoSchmitz

TSI CCI Hull with profit$$$This is a modified version of @SeaSide420 TSI CCI Hull with profits exit on long and short order ORIGINAL SCRIPT: /// /// feel free to edit/improve and comment

Strategy

In-depth global business and economic analysis Comprehensive trading education and market insights