Risk Sizer### Risk Sizer
**Risk Sizer** is a fast position-sizing and execution-risk tool designed for discretionary intraday and breakout trading.
Instead of choosing a position size first, place the draggable **SL** at the level where your trade idea is invalidated. Risk Sizer then calculates the position size based on your account risk while accounting for trading costs and execution conditions.
The indicator displays:
* **REC QTY** — liquidity-adjusted recommended position size
* **RISK QTY** — maximum size based on your configured risk
* **POSITION** — recommended position notional
* **SL** — stop price and percentage distance
* **ATR** — ATR for the current chart timeframe
* **SL / ATR** — stop distance relative to current volatility
* **BUFFER** — configurable slippage/execution allowance
* **RT FEES** — estimated round-trip trading fees
* **FEE / SL** — how significant fees are relative to the stop distance
* **RISK USED** — estimated total risk versus your configured risk budget
* **CAP USED** — percentage of the configured maximum position limit
* **1M LIQ** — average 1-minute notional volume used as a liquidity proxy
* **LIQ MULT** — suggested size reduction when the position is large relative to observed volume
* **EXECUTION** — simple green / amber / red execution warnings
### Position sizing
Position size accounts for:
**Structural SL + execution buffer + estimated round-trip fees**
This helps prevent extremely tight stops from producing unrealistically large position sizes.
For example, if your stop is only `0.01%` but your round-trip trading costs are `0.08%`, fees are already significantly larger than the structural stop. Risk Sizer highlights this through the **FEE / SL** metric and includes those costs when determining size.
### Liquidity-adjusted sizing
Risk Sizer also calculates an optional liquidity recommendation using average **1-minute PulseWire notional volume**.
If your risk-based position would represent more than your configured target percentage of average 1-minute volume, the indicator reduces the recommended size and shows the resulting **LIQ MULT**.
Example:
```text
RISK QTY 100 ETH
LIQ MULT 0.40x
REC QTY 40 ETH
```
The risk-based quantity remains visible so you can distinguish between:
**Risk capacity** — how much you could trade based on your stop and risk budget.
**Execution capacity** — a more conservative recommendation based on observed market activity.
### Execution status
The indicator classifies conditions into simple execution warnings.
**Green — OK**
No obvious sizing or execution issue detected.
**Amber — Review**
* High fees relative to SL
* Very tight or wide SL relative to ATR
* Liquidity-based size reduction
* Position notional cap reached
**Red — Attention**
* Round-trip fees exceed the structural SL percentage
* Invalid or impractical calculated position size
### Typical workflow
**1. Identify the trade setup**
**2. Drag SL to structural invalidation**
**3. Check EXECUTION status**
**4. Read REC QTY**
**5. Execute**
The indicator is intentionally designed for quick visual use during fast-moving markets.
### Important limitations
The liquidity model is a **proxy**, not an order-book or slippage prediction.
It uses PulseWire's available 1-minute volume data and does not know the actual depth, spread, liquidity-provider inventory, or execution quality available at your broker or exchange.
Actual fills may differ due to:
* Spread
* Order-book depth
* Market impact
* Latency
* Volatility
* Slippage
* Broker/exchange execution
* Fees and instrument specifications
Fees, quantity increments, point value, maximum notional and liquidity thresholds are configurable and should be adjusted to match the instrument and venue you trade.
**Risk Sizer is an execution and risk-management aid, not a trading signal or financial advice.**
Indicator
Indicator
Risk Guard - Position Size & Risk CeilingWhat it does
Risk Guard sizes your position from the risk you are willing to take, and tells you immediately when that risk goes above the limit you set for yourself.
Most position size calculators stop at the arithmetic. This one adds the part that actually protects an account: a ceiling.
Why a ceiling
Many traders do not use a fixed risk per trade. They size up on strong setups and down on weak ones. That flexibility is fine, until one trade quietly goes far beyond what the account can absorb.
Risk Guard separates the two:
- Risk for THIS trade is what you are taking right now, and it can change every time.
- Your risk ceiling is your rule, and it does not change.
When the first goes above the second, the table switches to the alert colour and says so plainly.
How to use it
1. Add the indicator. It displays straight away, using the current price and one ATR as demonstration values, so you never face an empty table.
2. Open the settings and enter your own Entry and Stop in the Trade group. Add a Target if you want R:R.
3. Set your account size, the risk for this trade, and your ceiling.
4. Pick the sizing mode and the pip size that match your instrument.
Sizing modes
Lots: gold, forex, CFD. Set the contract size (XAUUSD standard is 100 oz per lot, forex standard is 100000).
Units: crypto and spot.
Whichever you pick, the position size is shown with its unit spelled out and the other unit in brackets, so it cannot be misread.
What it shows
Direction, account size, trade risk against your ceiling, amount at risk, stop distance in price and in pips, position size, R:R and gain at target.
Customisation
Every colour is configurable: header within limit, header when the ceiling is passed, table background, text, position size value, and the entry, stop and target lines. Text size, border width and table position can also be changed.
Notes
Pip size is a setting, not a guess: gold 0.1, forex majors 0.0001, JPY pairs 0.01, and 0 to hide pips on crypto.
The calculation is exact when the quote currency matches your account currency. On crosses where it does not, treat the result as an approximation.
This is a planning tool. It does not place orders and does not read your broker account.
Indicator
ATR Chandelier StopTrade Control Adaptive ATR Chandelier Stop
The Trade Control Adaptive ATR Chandelier Stop is a volatility based trailing stop designed for swing and position traders who want a more objective way to manage exits and protect gains.
Instead of applying the same fixed percentage stop to every stock, the indicator uses Average True Range, or ATR, to account for how much each symbol typically moves. More volatile stocks receive wider stop levels, while lower volatility stocks receive tighter stop levels.
How it works
For long positions, the trailing stop is calculated as:
Highest high over the selected lookback period minus ATR multiplied by the selected multiplier
With the default settings, the calculation is:
22 bar highest high minus 3 times the 14 bar ATR
This creates a stop that hangs below the stock’s recent high, which is why it is called a Chandelier stop.
As the stock makes new highs, the stop can move higher. During normal pullbacks, the stop generally does not move lower while the bullish trend remains intact.
When price closes below the trailing stop, the indicator changes to a bearish state and begins plotting the corresponding stop above price.
Default settings
ATR Length: 14
Price Lookback: 22
ATR Multiplier: 3.0
Automatic Volatility Adjustment: Off by default
These settings are intended as a balanced starting point for swing and position traders using the daily chart and holding trades for several weeks to several months.
Adaptive volatility option
The optional adaptive setting adjusts the ATR multiplier based on ATR as a percentage of the stock price.
When enabled, the indicator gives highly volatile stocks additional room and may tighten the stop for lower volatility stocks. The standard 3 ATR setting remains the default for traders who prefer a simpler and more consistent approach.
Best uses
The indicator is designed for:
• Swing trading
• Position trading
• Trend following
• Managing profitable trades
• Reducing emotional exit decisions
• Monitoring individual stocks or watchlists
It is generally most useful on the daily timeframe.
Alert condition
The script includes an alert condition for a confirmed daily close below the trailing stop.
Recommended PulseWire alert settings:
Condition: Daily Close Below ATR Stop
Interval: 1D
Trigger: Once per bar close
The alert is designed to trigger when the trend first changes from bullish to bearish. It does not repeatedly alert every day while price remains below the stop.
Important considerations
The Trade Control Adaptive ATR Chandelier Stop is a trade management tool, not a complete trading strategy.
Traders should also consider technical support and resistance, entry price, position size, maximum acceptable loss, earnings risk, gap risk, and overall market conditions.
A stock can gap below the plotted stop, particularly around earnings or major news. The indicator does not guarantee execution at the displayed price. Indicator
Risk & Levels CockpitRisk & Levels Cockpit
Risk & Levels Cockpit answers one question on any market and any timeframe: if I take this trade, where is my stop, what size should I trade, and what can I lose? It is a risk-and-levels tool, not a buy/sell signal — it does not predict direction, it bounds risk around a trade you have already decided to take.
HOW IT WORKS
Three components chain one-way:
Theil-Sen robust channel — fits a trend line as the median of all pairwise slopes over the lookback. Being a median, it cannot be tilted by a single spike or wick the way ordinary regression can, so the rails give you a stable structure to trade against.
Extreme Value Theory tail model (Peaks-Over-Threshold, Generalized Pareto) — estimates how far price can realistically move against you at a chosen tail quantile, replacing a guessed 2xATR stop with a distance grounded in the actual tail of the return distribution. The channel rail acts as a structural floor, so your stop is never tighter than the channel edge.
Fixed-fractional sizer — turns that stop into a position size: units = floor(risk-budget / (risk distance x point value)). When the stop is wider than your risk budget, size correctly floors to zero and the panel shows what one unit would cost and the capital that would make one unit equal your target risk, so a zero is a decision, not a dead end.
TWO SIZING BASES
Stop distance risks your fraction at the drawn stop. Expected Shortfall risks your fraction at the mean loss beyond the stop (McNeil-Frey POT form, from the same tail fit) — wider, so fewer units, so that gapping through your stop still respects your budget. The panel always shows both the at-stop and at-tail loss per unit, so gap risk is visible in either mode. An optional vol-target overlay (on by default) scales size to keep portfolio volatility steadier across regimes; the Size-mode row always shows the live multiplier.
WORKS ON ANY MARKET, ANY TIMEFRAME
No session, expiry, or clock anchors; every lookback is in bars and volatility annualization self-scales — identical behavior from 1-minute scalping to daily positional, on stocks, futures, forex, crypto, and indices worldwide. Set the currency symbol and point value (money per point per unit) to your instrument: stocks/crypto/spot = 1; index and futures = the contract multiplier (for example NIFTY 65, S&P E-mini 50, Nikkei 1000, DAX 25); forex = point value per lot; options = point value x delta.
A Scalp/Intraday, Positional, or Custom preset adjusts the tail horizon and quantile. Scalp/Intraday is the default (tighter stops); positional traders should switch to the Positional preset for wider, conservative stops.
ON THE CHART
A slope-colored robust trend line with a TREND pill and a channel band, plus solid, pill-labeled decision levels — red STOP, amber BREAK (invalidation), and green T1 and T2 TARGET, each showing price and R-multiple. The panel gives the full sizing and risk readout, including a daily-loss-budget line.
LIMITATIONS (read before use)
Not a signal and not investment advice. Stops and targets are model references, not guarantees — gaps and slippage can exceed them. The tail quantile is scaled to the holding horizon by square-root-of-time, a deliberate approximation chosen over overlapping h-bar fitting which violates independence. The daily-loss cap is a display aid; a single-chart indicator cannot track or enforce live fills. The vol-target overlay multiplies the fixed-fractional size and can nudge per-trade risk above the nominal percent in calm markets — set Size clamp max to 1.0 to only reduce size, or turn it off for a strict fixed-percent rule. Position sizing does not create an edge; it bounds risk.
CREDITS
Original implementation. Theil (1950) and Sen (1968) robust slope; Pickands-Balkema-de Haan / Peaks-Over-Threshold Generalized Pareto tail estimation and Expected Shortfall (McNeil-Frey); fixed-fractional position sizing (Tharp / Vince). Indicator
Triple Barrier Exit with Meta LabelingOverview
Most tools tell you when to enter. This one frames how a trade would be managed — and then keeps an honest record of how that framing actually resolved. It takes a primary entry signal (its own built-in breakout, or any external signal series you point it at), draws a volatility-scaled profit barrier, stop barrier and time barrier around it, watches which is touched first, and feeds every resolved outcome into a live track record. On top sits a meta-label gate: a small online model that learns, from those resolved outcomes, whether to take or skip the next signal.
It is a research and trade-framing study — not a strategy, not a signal service, and not a validated edge.
Why these parts are ONE tool (mashup rationale)
Each layer exists because the one before it leaves a question open:
The triple barrier. A raw entry signal has no definition of success. Profit / stop / time barriers, scaled by current volatility (ATR or an EWMA of returns), turn a signal into a labelled outcome: profit-hit, stop-hit, or timed-out. Widths are regime-asymmetric — the profit barrier widens in trend and tightens in chop — because a fixed frame misprices the same signal in different conditions.
The trend-scanning vertical. A fixed holding time is arbitrary. The time barrier is instead chosen from candidate horizons by the strongest |t-value| of a linear fit — the horizon over which price is actually trending most decisively.
The meta-label gate. Knowing outcomes isn't the same as acting on them. A small online logistic model, trained only on resolved outcomes, scores each new signal and says TAKE or SKIP. It stays disabled until enough trades have resolved, so it never acts on an untrained model.
The honesty layer. Overlapping trades are not independent samples — so wins are recency-decayed and reported with a Wilson 95% lower bound per regime, alongside a reliability table and a Brier score for the meta-gate itself. If the gate isn't calibrated, the panel says so.
Remove any layer and the tool either mislabels the trade, mistimes it, acts on an untested model, or reports a win-rate it hasn't earned.
How it works
A primary signal fires. If the meta-gate passes, the trade is framed: profit = entry ± (PT × regime multiplier × σ), stop = entry ∓ (SL × regime multiplier × σ), and a vertical barrier holdH bars ahead. The frame is drawn as a forward box that recolours green / red / grey on first touch. Same-bar ties resolve stop-first (the conservative assumption). MFE and MAE are tracked live on the open trade. On resolution, the outcome trains the meta-model and updates the per-regime statistics.
How to use it
Read the panel before you trust the frame.
Meta gate — whether the model would take or skip the current signal (stays "warming" until it has enough resolved samples).
Wilson 95% lower — the honest floor of the win-rate in the current regime. If it isn't above 50%, this framing has not demonstrated an edge here.
Meta Brier — below ~0.25 means the gate's probabilities are reasonably calibrated; above it, ignore the gate.
The most useful thing you can do with it: point it at your own entry signal via the external-source input, and see how your signal resolves under a disciplined exit frame. The suggested size is advisory arithmetic (risk ÷ stop distance), not a recommendation. Only one trade is managed at a time — this is a study of the framing, not a portfolio simulator. The dashboard has a Compact layout (default) and a Pro layout (adds the scanned horizon, Brier, reliability tiers, PT/SL/timeout counts, live MFE/MAE and suggested size).
Universal across markets
Entry source, σ source, barrier widths and horizons are all inputs, so it runs on any symbol and timeframe. It needs no volume. Defaults target intraday index futures.
Non-repainting
Entries are taken and outcomes resolved only on confirmed bars, and the meta-model is trained only on resolved outcomes — so no statistic reads its own future and nothing inflates intrabar. The live "next-trade frame" preview is a forward projection at the current bar only, by design.
Originality
The triple barrier, meta-labelling and trend-scanning are published research concepts, credited below. What's assembled here is the specific synthesis: the triple barrier used as a live exit/management frame rather than an offline training pipeline, regime-asymmetric barrier widths, an online meta-gate that trains itself on the chart in front of you, and an honesty panel that reports the Wilson lower bound, the reliability tiers and the gate's own Brier score. Clean-room implementation; no third-party code reused.
Concept credits
Triple-barrier labelling, meta-labelling, trend-scanning, and sample uniqueness / time-decay for non-IID overlapping outcomes — Marcos López de Prado (Advances in Financial Machine Learning). Here the triple barrier is used as an exit/management frame and a labelling substrate, not as a training pipeline.
Wilson score confidence interval — Edwin B. Wilson · Brier score — Glenn W. Brier
Average True Range — J. Welles Wilder · Efficiency Ratio — Perry Kaufman
Inverse-volatility position sizing — standard risk-management practice
Honest limits
Overlapping trades are not independent, which is exactly why wins are decayed and reported with a Wilson lower bound rather than a raw percentage — treat the win-rate as descriptive, not a probability of future results. The meta-model is a small online logistic fit on three features; it can be miscalibrated, which is why its Brier score is shown. All figures are in-sample, with no costs, slippage or spread. Nothing here predicts price.
Disclaimer
Research and educational tool only. Not financial advice, not a recommendation, and no guarantee of results. The position-size output is arithmetic, not advice. Trading carries risk of loss. Test out-of-sample and make your own decisions. The author accepts no liability for any use. Indicator
Indicator
Position Size Calculator - Risk Manager, Risk/Reward & L[LunqFX]Risk Manager is an on-chart position size and risk/reward calculator for PulseWire that turns proper risk management into one click. Set your account size and risk per trade %, and it instantly gives you the exact position size (units / lots / contracts / shares), your risk and reward in dollars, the risk/reward ratio, and the breakeven win rate you need to be profitable — all visualized as clean risk and reward zones right on the chart. It works out of the box with an auto ATR setup (Entry / Stop Loss / Take Profit placed for you), or type your own levels. Built in Pine Script v6, it works on forex, crypto, stocks, indices, futures, gold (XAUUSD) and Bitcoin (BTCUSD), on any timeframe — because it sizes risk, not signals. Keywords: position size, position sizing, risk management, risk reward, risk/reward ratio, lot size calculator, money management, stop loss, take profit, R multiple, risk per trade, breakeven win rate, Kelly criterion, day trading, swing trading, scalping.
◆ WHY THIS MATTERS
Most traders blow accounts not because of bad entries, but because of bad position sizing and inconsistent risk. Professionals risk a fixed small % per trade (commonly 0.5–2%) and know their risk/reward before they click buy. This tool enforces that discipline on every trade — no spreadsheets, no external calculators.
◆ WHAT IT DOES
Exact position size from your account balance and risk %, in units, lots, contracts, shares or coins.
Risk and reward in account currency and as a % of account.
Risk/reward ratio with a clean visual meter.
Breakeven win rate — the minimum win rate needed to be profitable at your current R:R (a metric most calculators skip).
Visual risk zone (red) and reward zone (green) drawn between Entry, Stop and Target.
Optional fractional Kelly suggested risk %.
A modern, colour-coded dashboard.
◆ HOW IT WORKS
Auto mode (default): Entry is set at price, Stop at a chosen ATR distance, and Target at your chosen R multiple — a valid setup appears instantly on any instrument.
Manual mode: turn Auto off and enter your own exact Entry / Stop / Target prices in the settings.
Position size = (account balance × risk %) ÷ (distance from entry to stop). This guarantees that if the stop is hit, you lose exactly your chosen risk %.
Reward = position size × distance to target; R:R = reward ÷ risk.
Breakeven win rate = 100 ÷ (1 + R:R) — e.g., at 2R you only need to win >33% of trades to break even.
Lots/contracts = units ÷ your contract size (100000 for a forex standard lot, 1 for stocks/crypto, your multiplier for futures).
◆ HOW TO USE IT
Set Account balance and Risk per trade % once (e.g., 1%).
Pick Auto direction (Long/Short) or switch to manual and place your real Entry/Stop/Target.
Read the Position size — that is exactly how much to trade so your loss at stop = your set risk.
Check the R:R meter and Breakeven — only take trades whose math fits your strategy’s win rate.
Use the red/green zones to see risk and reward visually before entering.
Adjust Contract size to match your instrument (forex lots, futures multiplier, etc.).
◆ SETTINGS
Trade Setup (auto ATR or manual prices, direction, ATR stop, target R), Account & Risk (balance, risk %, contract size, size label), Kelly (optional), Visuals (box length, neon candles), Panel (text size, position, colours).
◆ ALERTS
Price hit Entry · Price hit Stop · Price hit Target.
◆ ORIGINALITY
This is original work. The auto-ATR setup engine, the account-aware sizing, the visual risk/reward zones, the colour-coded dashboard with the R:R meter and the breakeven-win-rate readout are all my own implementation. No third-party code is used.
◆ LIMITATIONS
This is a planning and sizing tool, not a signal generator — it does not tell you when to buy or sell.
Position size assumes your account currency matches the quote currency; for cross-currency pairs or unusual contracts, set Contract size to match your broker’s lot/units.
The auto ATR setup is a starting template — always adjust Stop and Target to real structure.
Results depend on the inputs you provide (balance, risk %, contract size); double-check them for your broker.
◆ NON-REPAINTING
This is a calculator: it draws from your inputs and the current price and never alters historical bars.
Risk Manager is an educational tool, not financial advice. Trading involves risk of loss. Always do your own research and manage risk responsibly. © LunqFX. Indicator
Risk & Position-Size Calculator : Futures/Prop | Falcon AIStop blowing accounts to oversized positions. This free tool tells you EXACTLY
how many contracts to trade so a stop-out only costs the dollars you decided to
risk — on any futures symbol (MNQ, MES, NQ, ES, MGC, CL and more). It auto-detects
each contract's point value, so the math is always right.
It shows:
• Position size (contracts) for your account + risk %
• Your real $ risk, $/point, and 2R / 3R targets
• Prop-firm guardrails: how many losing trades until you breach your daily-loss
limit or trailing drawdown
• Prior-day high/low for context
Set your account size, risk %, and stop (manual or ATR-based) — it does the rest.
Built by Falcon AI. Educational tool only — not financial advice. Indicator
0.75% Rule - Trade ProjectionA position-sizing and reward-projection overlay for discretionary traders.
You place an entry and a stop on the chart, and the script returns the
position size that risks a fixed fraction of your account, then projects
your reward targets as R-multiples. Direction (long or short) is inferred
from where you click. The focus is getting currency-correct sizing right
with as little input as possible, and catching the sizing mistakes that
quietly distort risk.
📊 What it does
- Sizes the trade so the entry-to-stop distance equals a fixed percentage
of account equity. Default is 0.75%, a conservative fixed-fractional
risk rule, but the percentage is adjustable.
- Reports the result in the correct unit for the instrument: lots and
units for forex, or contracts/shares sized off point value elsewhere.
- Projects a configurable number of reward targets spaced in R-multiples
(1R, 2R, 3R ...), each labeled with its R-multiple and the reward amount
in your account currency.
- Draws the risk zone (entry to stop) and reward zones, plus an info panel
summarizing account, risk, direction, stop distance, size and R:R.
⚙️ How it works
- Risk amount = account size x risk %. Position size = risk amount /
(stop distance x point value x conversion rate). For forex this is
converted into standard lots.
- Direction is read from the two clicks: a stop below entry is a long,
a stop above entry is a short.
- Instrument detection is automatic (forex, JPY pairs, metals, index,
crypto) via symbol info, with a manual override if you need it.
- Account-to-quote currency conversion is explicit and manual. The
account-currency dropdown is a display label only; the single field
that adjusts lot size is the conversion rate. The panel flags the two
mistakes that actually distort risk: leaving the rate at 1.0 on a
mismatched pair, and applying a non-1.0 rate when the currencies match.
- An optional ATR-based stop can override the clicked stop (length and
multiplier adjustable). Direction still comes from your clicks.
- Repaint-free by construction: no higher-timeframe requests, entry and
stop are static prices, and all drawing is deterministic.
📋 How to use it
1. Add the script. It prompts you to click an entry price, then a stop.
2. Set account size and risk % in settings (default 0.75%).
3. If your account currency differs from the pair's quote currency, enter
the conversion rate (account currency per one unit of quote currency).
The panel warns you when a rate is needed.
4. Read position size, R:R and target levels from the panel and on-chart
labels.
5. For a new setup, open the indicator menu, choose Reset points, then
re-click entry and stop. The Re-arm toggle pauses the current
projection so a stale setup cannot mislead you.
## Notes
- This is a planning and risk-discipline tool, not a signal generator and
not financial advice. It does not place trades.
- For non-forex instruments, sanity-check the point value against your
broker's contract specs before trusting the size.
- Inputs are absolute prices, so after switching symbols you may need to
re-click entry and stop. The script detects an off-scale setup and
prompts you. Indicator
MTIDDescription
MTID is an all-in-one overlay built for swing and position traders who want price action, key statistics and fundamentals on a single pane. Six configurable moving averages, a "big move" marker, a live stats dashboard, and an 8-quarter fundamentals table are combined into one indicator with independent toggles for every section.
WHAT'S ON THE CHART
• Six moving averages — each with its own length, type (SMA/EMA), color and timeframe-visibility filter (All / Intraday+Daily / Weekly+Monthly / Intraday-only / Daily-only / Weekly-only). Default lengths 10/20/50/100/150/200 cover the most-watched values.
• Purple-Dot Big Move — flags bars whose move ≥ a configurable % AND volume ≥ a configurable threshold. Shape, size, color and timeframe-visibility are all configurable; bars can be color-coded on move direction.
• Optional bar coloring for high relative-volume bars.
STATS DASHBOARD (vertical table or horizontal headband)
• Sector & Industry (auto-detected from the symbol)
• Market Cap with currency conversion (Auto / USD / INR / EUR / GBP / JPY) and Indian (Cr/LCr) or Western (M/B/T) formatting
• 52-Week High/Low — % off the high and % off the low (daily-candle based regardless of chart TF)
• 13-Week Peak/Bottom — same idea over a quarter
• ADR (Average Daily Range %) and ATR — daily-candle based
• U/D Ratio — up-volume vs down-volume
• Float %
• Distance vs Daily SMA and Distance vs Weekly SMA — both shown simultaneously, regardless of chart timeframe
• Relative Volume (RVol)
• % above Low-of-Day (intraday session low; bar low on daily+)
FUNDAMENTALS TABLE
Last four quarters (with three more held internally for YoY math) of:
• EPS with YoY and QoQ % change
• Sales (auto-scaled units) with YoY and QoQ % change
• OPM% (Operating Margin = Operating Income / Revenue) with YoY and QoQ
• Per-quarter P/E (annualised from quarter EPS)
Plus an optional row showing the next two estimated quarters (EPS estimates, YoY/QoQ).
Header row showing Market Cap, Free-Float Mkt Cap, ROE and TTM P/E.
Vertical (full grid) or horizontal (transposed headband) layout.
IPO-FRIENDLY
Lookback windows adapt to available history. A newly listed symbol with fewer than 52 weeks (or 13 weeks, 50 bars for RVol, 20 days for ADR, etc.) still gets values computed over whatever data exists, instead of showing "N/A".
CUSTOMIZATION
• Every section independently togglable.
• Per-table position (6 anchor points), text size, layout (vertical / horizontal headband), border & frame width.
• Per-column text alignment (Left / Center / Right) for the dashboard.
• Configurable blank spacer rows at the top of each table — useful when PulseWire's hover controls overlap the table.
• Fully themable colors (positive / negative / neutral, backgrounds, borders).
NOTES
• Sector, Industry, Market Cap, ROE, Float, EPS, Sales, Operating Income and EPS estimates are sourced from PulseWire's request.financial / request.earnings and may be unavailable for some symbols or exchanges.
• Currency conversion uses FX_IDC daily rates.
• Built in Pine Script v6. Indicator
Triple Lens by MOUTriple Lens by MOU
After spending years burning money on candlestick patterns, MACD crossovers, and Elliott Waves, I came to a simple conclusion: most retail technical analysis has been arbitraged into oblivion by quant funds. What survives — and what still works — sits in three places that machines can't fully eat: trend stage, accumulation pattern, and market breadth.
This indicator is what I built for my own trading. It overlays three independent frameworks from three legendary technicians:
Stan Weinstein — Stage Analysis (where are we in the cycle?)
William O'Neil — CANSLIM accumulation (is smart money building?)
Walter Deemer — Market Breadth (is the broader tape supporting us?)
Each lens looks at a completely different dimension. When all three light up green at the same time, you get a ▲ signal on the chart. That's the moment to pay attention.
Why three? Because any single indicator gets gamed. But three independent signals confirming the same direction is a different statistical animal — it's confluence, not coincidence.
One thing I want to be honest about: this isn't a crystal ball. Technical analysis cannot predict the future, period. What a good system can do is take you from 50/50 coin-flip entries to maybe 60-70% odds. That's it. But over hundreds of trades, that edge compounds — and that's where real wealth is built.
A ▲ signal is your green light to consider entering, not a guarantee that you'll win every time. Sizing, stops, and risk management still matter.
Important: This indicator goes blind during earnings. Earnings re-price the fundamentals — and technical analysis is built on the assumption that fundamentals are stable. If a ▲ fires right before an earnings call, wait it out. Let the dust settle, then re-evaluate.
Free to use. No tweaking needed. Built for swing and position traders on daily/weekly timeframes.
If this helps you, drop a boost. If you have feedback, comments are open.
— MOU Indicator
Index Futures Position Size Calculator V2A simple, free position size calculator for CME index futures traders.
Click Entry, click Stop Loss, pick your asset, get your contract size instantly. Built for fast NY session execution — no spreadsheets, no manual maths, no noise.
This is the updated version. The first release was a bare-bones calculator showing contract size only with a fixed SL buffer. This version is a full rebuild — every feature below came from real trading feedback, not theory.
═══════════════════════════════════
✦ SUPPORTED INSTRUMENTS
MNQ · MES · NQ · ES — all CME tick values hardcoded. No manual lookup, no mistakes.
═══════════════════════════════════
✦ WHAT IS NEW IN THIS VERSION
→ SL buffer is now a toggle — switch the auto ±1 handle offset on or off anytime from settings. When on, the SL label shows +1H so you always know what was calculated
→ Panel now shows four live values — asset, contract size, real USD risk after rounding, and full stop distance in points
→ Direction arrow — ▲ Buy or ▼ Sell auto-detected from your Entry and SL position
→ Panel size control — choose Small, Medium, Large or XL to fit any screen or preference
→ Lines now start exactly at your click point and extend right — no more lines appearing from far left
→ Price labels on both lines — see your exact Entry and adjusted SL price at a glance
→ Ghost line bug fixed — no more phantom line appearing at the bottom when switching timeframes
→ Dark PulseWire-native panel design — colour-coded values, clean two-column layout, easy to read at a glance during live sessions
═══════════════════════════════════
✦ FEATURES
→ One-click Entry and Stop Loss directly on the chart
→ Optional auto ±1 handle SL buffer — structural protection against wick hunts built in
→ Asset dropdown — MNQ, MES, NQ, ES with correct tick value loading automatically
→ Smart rounding — fractional contracts of 0.75 or higher round up, otherwise round down
→ Green Entry line and Red SL line from your exact click, both extending right
→ Live panel updates instantly when you move Entry or SL
═══════════════════════════════════
✦ HOW TO USE
Add to chart → click Entry → click Stop Loss → pick asset → set Account Size and Risk %. Read your size from the top-right panel. Three clicks and you are sized.
═══════════════════════════════════
✦ PROP FIRM CHALLENGE SIZING
Two clean methods to work within your max drawdown limit.
Method 1 — Loss budget split Divide your max loss by how many consecutive losses you can afford. Enter the result as Account Size with Risk at 100%. Example: $2,000 max loss ÷ 5 losses → Account Size $400 · Risk 100%
Method 2 — Direct percentage Enter your full max loss as Account Size and set your per-trade percentage. Example: $2,000 max loss, 20% per trade → Account Size $2,000 · Risk 20%
Both give the same result — use whichever feels natural.
═══════════════════════════════════
✦ A NOTE FROM THE AUTHOR
Built together with Claude AI through real iterative development — every single feature in this indicator exists because a real trade needed it.
This is 100% free and open source. No Discord, no course, no affiliate links, nothing to buy — ever.
You are completely free to copy this, modify it, rename it, improve it and republish it as your own. Seriously — go ahead. If you build something better on top of this, that is exactly the point. Clean tools should be free and open to everyone.
If it helps even one trader size their positions properly and protect their capital, it was worth sharing.
═══════════════════════════════════
✦ DISCLAIMER
Educational tool only. I do not take any responsibility when you use this indicator in your trading — always check the calculations before use. Futures trading carries substantial risk of loss. Not financial advice.
Built with ❤️ by REDz and Claude Indicator
Position Sizing CalculatorA simple automated calculator that shows how many shares can be bought or sold if a specific maximum amount is to be risked on the position.
The risk per share is assumed to be the distance to the respective buy or sell line of the Supertrend indicator. This is based on a calculation of the ATR for the last ten days, which is multiplied by a fixed factor and plotted against the highest or lowest candle of the past ten days.
The parameters can be changed manually. By default, a risk of $500 per trade is assumed.
For each of the last bars, the calculator displays the distance to the calculated exit and, through a simple division, calculates the number of shares that could be bought or sold in a potential long or short position to achieve this hypothetical maximum risk.
Of course, there is no guarantee that the respective price will actually be reached, but the calculator can help provide a reference point for sizing the position.
The principle is clearly visible in the screenshots: FRT is a stock that moves slowly and is only a short distance from the stop-loss level. At the current price of $114.47 and a calculated stop at $108.99, 91 shares could be purchased to risk $500. In total, that would be an order of $10,416.77 for a long position.
SOUN, on the other hand, has a very wide margin to the stop-loss; it is a stock with high volatility. Therefore, only 300 shares can be purchased here to achieve the same hypothetical risk. The position would thus be worth only $2,841.
Designed by tuvot_1a, programmed by Claude.
Indicator
Risk Runway Planner [AGPro Series]Risk Runway Planner
🧠 Core Idea
Is the current setup offering a clean risk runway, or is risk too wide, too blocked, or still too early?
📌 Overview / What it does
Risk Runway Planner is a chart-first risk planning and execution readiness tool designed to evaluate whether a setup has enough structure to deserve active attention.
Instead of printing generic buy or sell signals, the script studies stop-distance quality, invalidation clarity, expansion room, volatility state, trend support, and price location. It then converts those factors into a 0-100 quality score and a clear next-action state.
The script produces an active risk runway box, invalidation and target-edge guides, compact chart labels, alerts, and a clean AGPro planning panel. It does not predict future price movement, automate decisions, or guarantee that a setup will follow through.
🎯 Purpose & Design Philosophy
This script was built for traders who want to evaluate setup quality before execution, not after the chart has already moved.
Many tools show signals, volatility compression, or target levels in isolation. Risk Runway Planner is designed to connect the practical planning questions: Where is invalidation? Is stop distance reasonable? Is there enough room before obstruction? Is volatility supportive or unstable? What should the trader pay attention to now?
The design mindset is simple: a cleaner decision framework is more useful than another crowded signal layer.
⚡ Why This Script Is Different
Most tools focus on entries, squeeze conditions, support/resistance zones, or target projections as separate ideas.
This script does NOT try to become a generic compression map, a take-profit ladder, a position-sizing calculator, or a signal generator.
Instead, it evaluates the quality of the risk runway between invalidation and the next target edge. The core output is not a trade command. It is a planning state that helps the user decide whether a setup is READY, still on WATCH, BLOCKED by poor room, or exposed to WIDE RISK.
⚙️ Methodology
1. Context Detection
The script detects the active planning side using trend structure and price location, or allows the user to force long-context or short-context evaluation.
2. Reference Mapping
It maps the current planning range, recent invalidation shelf, nearby obstacle, ATR-normalized stop distance, and projected expansion room.
3. Reaction Evaluation
The model scores stop quality, expansion room, trend support, volatility state, and range location. These components are blended into a 0-100 quality score.
4. Visual Output
The output is shown through a risk runway box, invalidation guide, target-edge guide, compact labels, deterministic alerts, and a premium planning panel.
🗺️ How to Read the Chart
Zones = the active risk runway between invalidation and target edge.
Labels = compact state markers showing READY, WATCH, DOWNGRADE, INVALIDATED, or TARGET EDGE context.
Colors = bullish and bearish context use AGPro state colors, while neutral and warning conditions use controlled accent tones.
Panel = the panel summarizes Risk Compression, Expansion Room, Volatility State, Quality Score, Risk Edge, and Action.
🚦 Signals & States
• READY → the current risk runway has enough quality to justify active attention.
• WATCH → the setup is improving but does not yet meet the stricter readiness threshold.
• WIDE RISK → stop distance or invalidation quality is too weak for clean planning context.
• BLOCKED → expansion room is limited or the nearest obstacle is too close.
• WAIT → the planner does not detect a strong enough structure yet.
• INVALIDATED → a prior active invalidation shelf has been crossed.
• TARGET EDGE → a prior target edge has been reached.
🔔 Alerts Logic
Alerts trigger when the planner enters READY state, enters WATCH state, downgrades from READY, crosses a prior invalidation shelf, or reaches a prior target edge.
These alerts are attention markers. They are not trade instructions, entry signals, or automated strategy commands.
🧩 Confluence Logic
The strongest planning state appears when multiple components align:
Stop-distance quality + expansion room + trend support + controlled volatility + favorable price location.
When these factors align, the script can move from WATCH to READY. If risk widens or room becomes blocked, the state can downgrade.
📊 When to Use
• Before evaluating a discretionary setup
• During trend pauses where invalidation is becoming clearer
• Before breakout or continuation attempts when risk needs structure
• Around pullbacks where stop distance and target room need review
• When comparing whether one setup has cleaner risk than another
⚠️ When NOT to Use
• Extremely low-liquidity symbols
• Very noisy micro-timeframes with unstable wicks
• News-driven volatility spikes
• Markets where recent structure is too distorted to define a useful invalidation shelf
• Situations where the user expects a signal-only entry tool
🎛️ Key Inputs
• Planning Side → controls Auto, Long Context, or Short Context evaluation.
• ATR Length → normalizes stop distance, room, labels, and volatility state.
• Planning Range → defines the broader structure used for price location and range context.
• Invalidation Lookback → controls how the invalidation shelf is mapped.
• Obstacle Lookback → controls how nearby target-edge obstruction is estimated.
• READY / WATCH Thresholds → adjust how selective the planner is.
• Visual settings → control runway boxes, guide lines, memory boxes, labels, panel location, theme, and font sizes.
🖥️ Interface & Visual Design
The interface is built around a clean planning panel and one primary chart object: the risk runway box.
The panel uses a single merged AGPro header row and keeps the key planning information readable without turning the chart into a dashboard-heavy layout.
Labels are intentionally compact, offset away from candles, and controlled with cooldown and maximum-visible settings.
🧪 Practical Usage Workflow
1. Read the panel action state.
2. Check whether the risk runway box has enough room between invalidation and target edge.
3. Review whether the Risk Edge is reasonable in ATR terms.
4. Confirm whether the chart context supports the selected planning side.
5. Treat alerts as attention markers and review the broader market context before making any decision.
🔍 Interpretation Guidelines
A higher score means the planner sees better alignment between risk, room, volatility, trend support, and location.
READY does not mean a trade must be taken. It means the setup has enough planning quality to deserve attention.
WATCH means the structure may be developing, but at least one component still needs improvement.
WIDE RISK and BLOCKED are caution states. They help identify when the chart may be less efficient for planning.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed signals.
It does not replace user judgment, risk management, or broader market analysis.
⚠️ Limitations & Transparency
Timeframe differences can change how invalidation shelves and obstacles are detected.
Volatility changes can alter ATR-normalized risk and room conditions.
Market structure can shift quickly after news, low-liquidity movement, or aggressive momentum expansion.
The script is rule-based and should be interpreted as an analytical planning layer, not as certainty.
🧠 Market Context Notes
Risk quality is not only about stop distance. It also depends on whether price has enough clean room to move, whether volatility is controlled, and whether structure supports the active side.
The planner is most useful when it helps the user avoid low-quality setups before they become emotional decisions.
🧾 Use Case Examples
When price is near a constructive invalidation shelf and still has clean room toward the next target edge, the planner may move toward WATCH or READY.
When price is too close to the nearest obstacle, the planner may show BLOCKED even if trend direction looks attractive.
When stop distance becomes too wide relative to ATR, the planner can show WIDE RISK even if the setup still looks visually interesting.
🧱 System Philosophy
Risk Runway Planner follows the AGPro Series decision-engine approach:
Context first.
Risk before reward.
Structure before signal.
Attention markers instead of promises.
🔐 Non-Promise Statement
No indicator can remove uncertainty.
No state, score, label, alert, or visual box should be interpreted as guaranteed market direction.
📉 Risk Disclosure
Trading involves risk.
All decisions remain the responsibility of the user.
This script is for educational and analytical chart review only and does not provide financial advice.
📚 Educational Note
The script is designed to help users think more clearly about setup quality, invalidation, volatility, and available room before reacting to price movement.
Indicator
Take Profit Planner [AGPro Series]Take Profit Planner
🎯 **Overview**
**Take Profit Planner ** is a precision exit-planning tool that transforms trade management from guesswork into a structured process. It builds a disciplined profit ladder around any trade idea — whether you are a scalper managing rapid exits or a swing trader stepping out of positions over days — and keeps the entire plan on one chart with live progress tracking.
Most traders agonize over entries and leave exits to improvisation. This tool flips that habit: define your anchor, choose your calculation style, and the script projects a complete multi-tier exit map with stop loss, position-sizing allocation, confluence scoring, and real-time hit tracking.
🪜 **What Makes It Different**
Unlike conventional take-profit indicators that plot a single ATR-based target or fixed R:R pair, this tool offers a **multi-layer exit architecture**:
▫️ **Three Calculation Modes** — Fibonacci Extensions, R-Multiples, or Hybrid Confluence in a single tool
▫️ **Three Anchor Sources** — Manual price inputs, auto pivot detection, or recent S/R zone anchoring
▫️ **Confluence Scoring** — In Hybrid mode, every target receives a ★ / ★★ / ★★★ rating based on how many independent level types (Fib, round number, pivot S/R) cluster at that price
▫️ **Position-Sizing Layer** — Allocate a custom percentage of your position to close at each tier, with automatic weighted P&L calculation
▫️ **Live Progress Tracking** — Visual hit confirmation (✓), realized vs expected profit, and a six-state status ladder: ACTIVE → PROGRESSING → IN PROFIT → NEAR COMPLETE → ALL TPs HIT → STOPPED OUT
🧠 **Methodology**
▫️ **Anchor Detection** — The script identifies a trade's origin (Swing) and entry point using one of three methods. Auto Pivot uses a confirmable `pivothigh`/`pivotlow` with configurable length. Auto S/R uses the most recent swing extremes as structural anchor points. Manual lets you input exact prices.
▫️ **Direction Inference** — LONG or SHORT is determined automatically from the geometry: Entry above Swing → LONG, Entry below Swing → SHORT. No manual flag needed.
▫️ **Stop-Loss Logic** — Three modes: ATR Multiple (volatility-adaptive), Swing Point (structural), or Fixed Percent (disciplined). In Manual anchor mode, you set the stop directly.
▫️ **Target Projection** — Fibonacci mode projects targets from the Anchor→Swing leg using standard extensions (1.272, 1.414, 1.618, 2.000, 2.618). R-Multiple mode multiplies the stop distance by risk factors (1R, 2R, 3R, 5R, 8R). Hybrid uses Fibonacci as base and scores confluence.
▫️ **Confluence Algorithm** — For each Fibonacci target, the script checks proximity to: (1) the nearest psychological round number within 0.15 ATR, (2) the most recent pivot high within 0.2 ATR, (3) the most recent pivot low within 0.2 ATR. Each alignment adds one point to the base Fibonacci score.
▫️ **Hit Detection** — On every confirmed bar, the script checks whether price crossed each un-hit target. Hits are persistent until the anchor changes by more than 1 ATR, at which point the plan resets.
🔔 **Signals & Alerts**
▫️ **TP Hit** — Fires once per bar when price touches a specific target. Alert message includes tier number, price, and direction.
▫️ **SL Hit** — Fires once when stop-loss is breached.
▫️ **All TPs Reached** — Fires once when the full ladder is completed.
All alerts are non-repainting and trigger only on confirmed bars.
🎛️ **Key Inputs**
▫️ **Calculation Mode** — Fibonacci Extensions, R-Multiples, or Hybrid Confluence
▫️ **Anchor Source** — Manual Price, Auto Pivot High/Low, or Auto Recent S/R
▫️ **Pivot Length** — Bars of confirmation for automatic pivot detection (default 10)
▫️ **Stop-Loss Mode** — ATR Multiple, Swing Point, or Fixed Percent
▫️ **Number of TP Tiers** — 2 to 7 (default 5)
▫️ **Fibonacci / R-Multiple Levels** — Fully customizable per tier
▫️ **Allocation %** — Position-sizing percentage per tier
▫️ **Zone Half-Width (ATR)** — Vertical thickness of target zones in ATR units
▫️ **Panel Location & Theme** — Six positions, Dark or Light theme
▫️ **Label & Panel Font Size** — Tiny, Small, Normal, Large
💡 **How to Use**
▫️ **Scalper Workflow (Fast Exits)** — Set Calculation Mode to R-Multiples, tier count to 3, allocations to 50 / 30 / 20. Use Auto Pivot with pivot length 5–8 on lower timeframes. Exit weighted-partials at each R-level.
▫️ **Swing Trader Workflow (Multi-Day Holds)** — Set Calculation Mode to Hybrid Confluence, tier count to 5, allocations to 20 / 20 / 25 / 20 / 15. Use Auto Pivot with length 10–15 on 4H or daily. Prioritize exits at ★★★ confluence targets.
▫️ **Discretionary Trader Workflow** — Set Anchor Source to Manual Price, enter your own Entry, Swing, and SL values. Choose Fibonacci mode for trend-based projections or Hybrid for confluence-weighted decisions.
▫️ **Position Management** — The Expected line in the panel shows total profit % if all active tiers are filled (weighted by allocation). The Realized line tracks booked profit as tiers fill. Use this to compare planned vs actual performance.
⚠️ **Limitations & Transparency**
▫️ This is a **planning and visualization tool**, not an entry signal generator. It assumes you already have a trade bias; it structures the exit.
▫️ **Auto-anchor modes** rely on confirmed pivots, which means the most recent plan updates a few bars after a fresh pivot forms. This is intentional to prevent repainting.
▫️ **Confluence scoring** is based on the current snapshot of pivot highs/lows and round numbers. As price moves and new pivots form, scores may change.
▫️ **Hit detection** uses bar highs/lows on confirmed candles only.
▫️ The tool does not know your actual fill prices, slippage, or spreads — expected and realized percentages assume exact execution at target prices.
🛡️ **Risk Disclosure**
Trading involves substantial risk of loss and is not suitable for every investor. The information provided by this indicator is for educational and informational purposes only and does not constitute financial advice, a trading recommendation, or a solicitation to buy or sell any asset. Past performance does not guarantee future results. Always perform your own analysis, define risk before entering any trade, and use proper position sizing. The author and AGProLabs accept no liability for trading decisions made using this tool.
🔓 **Open Source**
This script is published open-source under the Mozilla Public License 2.0. You are welcome to study the methodology, build on it, and contribute feedback. Indicator
Stop Loss Optimizer Engine [AGPro Series]Stop Loss Optimizer Engine
🔹 OVERVIEW
Stop Loss Optimizer Engine compares four independent stop-loss methodologies side by side on a single chart, so traders can see at a glance where each approach would place protection and which one has historically held up best on the current symbol and timeframe. Every method is calculated for both LONG and SHORT, giving eight reference levels plus a compact panel with distance-to-price and a historical hold-rate statistic per method. A Risk Zone highlights the area between current price and the method with the strongest historical hold-rate, providing a clean S/R-style visual anchor for position sizing and R-multiple planning.
🔹 UNIQUE EDGE
Most stop-loss indicators on the platform commit to a single philosophy — pure ATR, pure Chandelier, or pure structure. Traders who want to compare approaches end up loading multiple scripts and eyeballing the differences. Stop Loss Optimizer Engine is built around a different premise: volatility, structure, trailing and recent-extreme stops each have environments in which they work well, and the trader should decide based on evidence rather than habit. The indicator renders all four on one chart, adds a per-method hold-rate measured on the active instrument, and flags the highest-hold-rate method with a star marker so the comparison is always a single glance away. The Risk Zone is drawn using the current-best method, which means the visual anchor adapts to whichever approach is statistically holding up best on that symbol and timeframe right now.
🔹 METHODOLOGY
The four engines are independent and each produces a LONG and a SHORT level:
ATR-SL — close minus or plus ATR × multiplier. Volatility-adaptive, widens in turbulent markets, tightens in calm ones.
Pivot-SL — the most recent confirmed pivot low or pivot high. Respects market structure, places the stop beyond the last reversal point rather than at an arithmetic distance.
Chandelier-SL — highest high minus ATR × multiplier for LONG, lowest low plus ATR × multiplier for SHORT. The classic Le Beau / Elder trailing stop, designed to follow strong trends without premature exits.
Swing-SL — the lowest low or highest high over a short lookback. A simple, robust baseline that works well for shorter trades and scalping.
Hold Rate — for every historical bar in the lookback window, the indicator records the SL level that each method would have produced at that bar, then checks whether price breached that level within a fixed forward window. Hold Rate is the percentage of evaluated bars in which the SL was not breached. This is a pure historical observation, not a forward performance projection.
🔹 SIGNALS & ALERTS
Visual — dotted lines for LONG stops (plotted below price), dashed lines for SHORT stops (plotted above price). Each method uses a distinct color. Labels sit at the right edge of each line with the method name and exact price. A dedicated anti-overlap resolver repositions labels vertically whenever two or more methods produce near-identical levels, so the rightmost chart panel stays readable in tight clusters.
Risk Zone — a shaded rectangle between current close and the highest-hold-rate SL on the trend-dominant side, extending forward from the current bar. Color matches the selected best method.
Panel — four-column layout showing method, LONG price (and distance %), SHORT price (and distance %), and Hold Rate, with a star marker beside the method currently holding the highest rate. A trend footer reports Bullish or Bearish based on the EMA50 filter.
Alerts — four pre-configured conditions for price breaching the ATR and Chandelier SL levels on either side.
🔹 KEY INPUTS
Method toggles for each of the four engines. Length and multiplier inputs per method, with balanced defaults (ATR 1.5× / 14, Pivot length 5, Chandelier 2.5× / 22, Swing lookback 7). Hold-rate statistics lookback and forward window, defaulting to 1000 and 10 bars. Visual controls for long-side lines, short-side lines, labels, the Risk Zone and a trend-based dimming of the counter-trend side. Panel location (six positions), panel theme (Dark or Light), and adjustable font sizes for panel and labels, all defaulting to Normal.
🔹 HOW TO USE
Open the indicator on any symbol and any timeframe. Read the panel first — the starred method is the one with the best historical hold-rate on the current chart. Pick a method that matches the trade plan: ATR for volatility-aware scalps, Pivot for structural setups, Chandelier for trend-following swings, Swing for simple quick trades. Use the Hold Rate column as secondary evidence, not as a standalone forecast. Read the SL price and the distance percentage next to it to size position accordingly — a 2% stop and a 6% stop are not the same trade, even on the same entry. The Risk Zone is a convenience visual for the trend-dominant side and should be interpreted together with the other levels, not in isolation.
🔹 LIMITATIONS & TRANSPARENCY
Hold Rate is a backward-looking statistic computed on historical bars of the active chart. It describes what would have happened under a fixed forward-window assumption on past data and does not guarantee any future behavior. The forward-window length, lookback size and method parameters all influence the resulting numbers; changing inputs changes the statistic. The Pivot-SL method depends on the availability of confirmed pivots in the lookback window and will fall back to a conservative ATR-based placeholder when a pivot is not yet confirmed. Risk Zone selection is based on hold-rate ranking, which can switch between methods as markets evolve. This script is a decision-support tool for discretionary risk management, not a trade-entry signal generator. Always combine with independent analysis and sound position sizing. Past performance of any stop-loss method does not guarantee future results.
🔒 RISK DISCLOSURE
This script is provided for educational and informational purposes only. It is not financial, investment or trading advice. Trading involves substantial risk of loss; use at your own discretion and risk. Indicator
Indicator
Indicator
Risk Reward Visualizer [AGPro Series]Risk Reward Visualizer
🔹 Overview
Risk Reward Visualizer is a professional trade-planning indicator that transforms every setup into a clean visual framework: entry, stop-loss, and up to three take-profit targets displayed as long rectangular R-multiple zones. Beyond basic visualization, it adds three features rarely found together in one tool — a breakeven probability calculator, live MFE/MAE excursion tracking, and an automatic trail-to-breakeven workflow.
The indicator is built for traders who think in R-multiples: swing traders, prop-firm candidates, day traders, and anyone who wants to answer the question "does this setup actually make mathematical sense?" before committing capital.
🔹 What Makes It Different
Most risk/reward scripts stop at drawing levels and a position-size table. This one goes further:
• Breakeven Probability Math — For every R target, the panel displays the minimum win rate required to break even, adjusted for round-trip fees. A 3R target needs only 25% wins; a 1R target needs 50%. Seeing this side-by-side reframes how you evaluate setups.
• Live MFE / MAE Tracking — Maximum Favorable Excursion and Maximum Adverse Excursion are tracked in real time from the moment the setup becomes valid. Labels mark the exact bar of each peak in R-multiples, with leader lines connecting the label to the wick, so you can grade trade quality after the fact.
• Trail-to-Breakeven Visualization — When TP1 is hit, the original stop fades and a new breakeven line is drawn at entry, making the risk management discipline visible on the chart.
• Hybrid Auto-Detect — Leave Entry and Stop at zero and the script fills them using the current close and the most recent swing pivot plus an ATR buffer. Provide one manually and the other auto-completes. Everything can be overridden.
🔹 Methodology
Levels are calculated from the standard R-multiple framework:
• Risk per unit = |Entry − Stop|
• Take-profit N = Entry ± (N × Risk per unit), signed by trade direction
• Breakeven win rate = (1 + fees_R) / (1 + R target)
Direction is auto-inferred from the relationship between Entry and Stop (Long when Stop is below Entry, Short otherwise), and can be forced. Auto-detect uses a pivot lookback to locate the most recent swing high or low, then offsets the stop by a user-defined ATR multiple to reduce wick-out risk.
MFE and MAE reset whenever Entry or Stop changes, so editing inputs restarts tracking cleanly. Hit detection uses bar high or low against each level and fires alerts only on the rising edge of each event.
🔹 Visuals & Signals
• Risk zone rendered as a pink rectangle between Entry and Stop
• TP1, TP2 and TP3 zones rendered as stacked teal rectangles with graded opacity
• Entry line in indigo, stop in pink, take-profits in teal
• Labels anchor to the right edge of the zone so they never hide candles
• MFE label on the favorable excursion peak, MAE on the adverse peak, each offset 1.5 ATR with a dotted leader line
• Alerts: TP1 hit, TP2 hit, TP3 hit, Stop Loss hit, Breakeven reached
🔹 Key Inputs
• Setup Mode — Manual, Auto-Detect, or Hybrid
• Trade Side — Auto, Long, or Short
• Entry and Stop — leave at zero to auto-detect
• Swing Lookback and ATR Buffer — for auto-detected stops
• TP1, TP2, TP3 multipliers with individual show/hide toggles
• Trail Stop to Breakeven After TP1 — toggle
• Round-Trip Fees (%) — folded into breakeven math
• Enable Position Size Calculator — optional; account size and risk percentage
• Panel location, panel font size, label font size, zone length, zone transparency
🔹 How To Use
Step 1 — Add the script to any symbol and timeframe. By default, Hybrid mode uses the current close as entry and the most recent swing plus an ATR buffer as stop.
Step 2 — Override Entry or Stop with your planned levels if you have a specific setup in mind.
Step 3 — Check the Breakeven Analysis section of the panel. Confirm the minimum win rate required for your chosen R target is realistic for your strategy.
Step 4 — Set alerts for the targets you want to be notified on. If Trail-to-Breakeven is enabled, you will also receive a notification when TP1 hits so you can move your stop in your broker.
Step 5 — After the trade, review MFE and MAE to grade execution. Did price reach favorable excursion that you missed? Did it dip deep into risk before resolving?
🔹 Limitations & Transparency
• This is a planning and visualization tool. It does not place orders and does not produce buy or sell signals.
• The breakeven calculation treats fees as a percentage of entry price converted into R-units. It is a useful approximation, not a tax or slippage model.
• Auto-detected stops depend on recent swing structure. On very low-liquidity symbols or during strong trends without pullbacks, recent swings may be stale. Verify visually before using.
• MFE and MAE tracking uses bar high or low and resets when inputs change.
• Position sizing assumes a linear contract value and does not account for margin, leverage, or instrument-specific tick rules. Always cross-check with your broker.
🔹 Risk Disclosure
Trading carries risk of loss. This indicator is provided for educational and analytical purposes only and is not financial advice. Past behavior of any tool does not guarantee future performance. Use proper position sizing and never risk more than you can afford to lose. Indicator
Indicator
AG Pro Position Planner [AGPro Series]AG Pro Position Planner
OVERVIEW
AG Pro Position Planner is a structured trade-planning and risk-organization tool designed for traders who want to map a position before execution. It focuses on four core elements of trade preparation: entry location, stop placement, target mapping, and position sizing. Instead of trying to predict direction or generate automated entries, the script helps organize a plan around levels that the user defines manually.
The purpose of this tool is not to tell the user what to buy or sell. Its purpose is to turn a discretionary plan into a visible, measurable framework on the chart. By combining entry, stop, risk budget, capital usage, and target structure in one view, the script helps reduce planning ambiguity and makes the trade idea easier to review before any order is placed.
The script supports both long and short planning. It can also operate in two different target modes. In R-Based mode, targets are derived from the distance between entry and stop. In Manual mode, the user can input exact target prices directly and the script will convert those targets into their implied R-multiples. This allows the same tool to support both systematic planning and discretionary scenario mapping without changing the underlying workflow.
The visual design is intentionally restrained. The chart shows entry, stop, and target levels, along with optional reward and risk zones. A compact panel summarizes the key planning information, including direction, mode, risk per unit, risk budget, sizing, exposure, and target statistics. The result is a planning layout that remains readable on both light and dark themes while keeping the focus on structure rather than decoration.
WHAT THIS SCRIPT DOES
This script helps the user:
• define a planned entry price
• define a planned stop price
• convert account risk into a position size estimate
• map one to three targets on the chart
• compare manual targets to the initial risk distance
• review exposure before execution
• validate whether a manual target structure is logically ordered
• visualize the reward zone above entry and the risk zone below entry for long scenarios, or the inverse logic for short scenarios
The script is designed as a planning layer. It does not attempt to replace the user’s analysis process. It assumes the user already has a trade idea and needs a cleaner way to structure and review that idea.
UNIQUE EDGE
The distinguishing feature of this script is not signal generation. Its edge is organizational clarity.
Many tools focus on entries, signals, or directional interpretation. This one focuses on plan construction. The user chooses the key prices, and the script translates them into a coherent risk model. That distinction matters. The script does not present itself as a forecasting engine, a market-timing system, or an automated decision model. It is a position-planning framework.
A second differentiator is the dual target workflow. Some users think in fixed R-multiples. Others think in exact price objectives. AG Pro Position Planner supports both approaches in the same interface. In Manual mode, the script still reports the effective R-value of each target, which helps the user compare discretionary targets against the initial stop distance without losing consistency.
A third differentiator is the built-in validation behavior. The script checks whether the trade structure is logically valid for the chosen direction. In Manual mode, it also checks whether the targets are placed in the correct direction and in the correct order. This helps the user detect plan errors before execution rather than after the fact.
METHODOLOGY
The planning model is straightforward by design.
1) Entry and stop define the base risk distance.
The script measures the absolute distance between entry and stop. That distance becomes the reference risk per unit.
2) Account risk defines the risk budget.
The user enters an account size and a percentage risk per trade. The script converts this into a monetary risk budget.
3) Position size is estimated from the risk budget.
The script divides the risk budget by effective risk per unit and rounds the resulting quantity down to the selected quantity step.
4) Optional fee adjustment can be included.
An estimated fee percentage can be added to the per-unit risk as a conservative sizing buffer.
5) Targets are then mapped in one of two ways.
In R-Based mode, each target is calculated from the entry-to-stop distance using the selected R-multipliers.
In Manual mode, the user provides exact target prices and the script calculates the implied R-value of each target relative to the original stop distance.
6) Exposure statistics are summarized in the panel.
The panel shows stop distance, capital usage, risk budget, and sizing information so the trade can be evaluated as a complete plan rather than as isolated levels.
This methodology is intentionally transparent. The script is not using hidden directional filters, prediction logic, or undisclosed entry models. The calculations are derived from the user’s own inputs.
TARGET MODES
R-Based Mode
R-Based mode is intended for users who want a consistent structure around initial risk. The user defines entry and stop, then sets target multipliers such as 1R, 2R, or 3R. The script projects those levels automatically from the base risk distance. This is useful when the user wants standardized scenario planning and fast comparison between multiple setups.
Manual Mode
Manual mode is intended for users who work with exact price objectives. In this mode, the user enters target prices directly. The script then converts those levels into implied R-values. This allows discretionary targets to be measured against the same initial risk model.
To reduce planning mistakes, the script validates whether manual targets are placed in the correct direction and in the correct order for the chosen trade direction. Invalid target structures are flagged in the panel instead of being silently accepted.
PANEL AND VISUAL STRUCTURE
The chart can display:
• entry line
• stop line
• target lines
• reward zone
• risk zone
• right-side labels for entry, stop, and targets
• a compact summary panel
The panel is designed to keep the most useful information visible without taking over the chart. Its goal is to support review, not to dominate the screen.
The compact panel includes:
• plan summary
• validation badge
• entry and stop
• risk per unit
• risk budget
• sizing
• exposure
• target statistics
This structure is meant to help the user answer practical questions quickly:
How much is being risked?
How large is the position?
How much capital is being used?
How far is the stop?
What does each target represent in both price and R terms?
KEY INPUTS
Trade Setup
• Trade Direction
• Target Mode
• Entry Price
• Stop Price
• R-based targets
• Manual targets
Risk Model
• Account Size
• Risk Per Trade (%)
• Estimated Fees (%)
• Quantity Step
Visual Settings
• Panel visibility
• Panel position
• Panel theme
• Panel text size
• Level label size
• Label offset
• Risk/reward zone visibility
• Zone transparency
• Individual target visibility
These inputs are separated by function so the planning workflow stays readable and predictable.
VALIDATION AND SAFETY LOGIC
The script validates several conditions before presenting a plan as valid.
For direction:
• Long plans require stop below entry
• Short plans require stop above entry
For base structure:
• Entry must be positive
• Stop must be positive
• Account size must be positive
• Risk percentage must be positive
• Quantity step must be positive
• Entry and stop must not be identical
For manual targets:
• Targets must be in the correct direction relative to entry
• Targets must be logically ordered for the selected direction
If the structure is invalid, the panel reflects that status instead of presenting the setup as a clean plan. This behavior is intentional. The script is designed to help organize decisions, but also to prevent simple construction errors from being overlooked.
WHO THIS SCRIPT IS FOR
This script is intended for users who already make their own directional decisions and want a cleaner way to structure position plans on the chart.
It may be useful for:
• discretionary traders
• swing traders
• intraday traders
• users who plan entries and stops manually
• users who prefer fixed-R target mapping
• users who want manual targets translated into risk terms
• users who want better visual discipline before execution
It is less relevant for users who are looking for:
• automated entries
• hidden directional logic
• predictive signals
• scanner behavior
• portfolio automation
• strategy backtests
SIGNALS AND ALERTS
This script does not generate buy signals or sell signals.
This script does not publish automated trade calls.
This script does not attempt to identify market direction.
This script does not include alert logic for execution decisions.
Its purpose is planning, visualization, and risk organization.
LIMITATIONS AND TRANSPARENCY
This script is a planning tool, not an execution engine.
It does not know whether the selected entry will be filled.
It does not know whether slippage will occur.
It does not know whether the market will reach the defined targets.
It does not account for instrument-specific margin rules, liquidation mechanics, funding costs, or exchange-specific order behavior unless the user adjusts inputs manually.
The sizing output is an estimate based on the values entered into the script. Real-world execution may differ due to slippage, fees, order type, spread, partial fills, and instrument-specific trading conditions.
In Manual mode, the script evaluates the price structure entered by the user, but it does not claim that those targets are likely to be reached. It only expresses them relative to the initial risk distance.
The chart zones are visual planning aids. They are not probability forecasts and should not be interpreted as predictive boundaries.
WHAT THIS SCRIPT IS NOT
This script is not:
• a strategy tester
• a signal service
• an automated trade system
• a forecasting model
• a promise of profitability
• a replacement for independent analysis
• a substitute for execution judgment
• a guarantee of risk control in live market conditions
It is a structured chart tool for planning and reviewing position scenarios.
RISK DISCLOSURE
Trading and investing involve risk. Any planned setup can fail, and losses can exceed expectations due to slippage, volatility, or execution conditions. This script is provided as an organizational and visualization tool only. Users remain fully responsible for their own analysis, trade selection, order placement, and risk management decisions.
No indicator can remove market risk. A visually clean plan is still only a plan. Position sizing, stop placement, and target mapping should always be reviewed in the context of the instrument, timeframe, liquidity conditions, and the user’s own trading process.
FINAL NOTE
AG Pro Position Planner is built around a simple idea: a trade plan should be measurable before it is actionable. By turning entry, stop, risk budget, sizing, and targets into a single visible structure, the script aims to make discretionary planning more disciplined, more transparent, and easier to review.
The script does not attempt to decide for the user. It helps the user define the plan clearly enough to evaluate it. Indicator
Risk Management & Position size calculator (FinPip)# Risk Management & Position size calculator (FinPip)
**Size your trades by risk.** Set your capital, risk %, entry and stop-loss — the indicator gives you position size in units, a take-profit level from your reward:risk ratio, and a clear summary on the chart.
Works on any symbol (stocks, forex, crypto, futures). Pine Script v6 · Mozilla Public License 2.0
---
## How to add to your chart
1. In PulseWire, open **Indicators** (or search **“Risk Management”** / **“Finpip Risk Manager”**).
2. Select **Risk Management & Position size calculator (FinPip)** and add it to the chart.
3. Open **Settings** (gear on the indicator label) to set your capital, risk %, entry price, and stop-loss price.
---
## What you get
- **Entry, Stop-Loss & Take-Profit** — Drawn as horizontal lines on the chart (direction is Long if Entry > SL, Short if Entry < SL).
- **Position size** — Number of units (shares, lots, contracts) so that if price hits your SL, you lose only your chosen risk amount.
- **Info panel** — Capital, Risk %, Risk $, Reward $, R:R, Size (units), Risk/Unit, Entry/SL/TP prices, and direction. You can move the panel to any corner and change text size.
---
## Settings (inputs)
**Risk & Capital**
- **Total Account Capital ($)** — Capital used for risk (default 10000).
- **Risk per Trade (%)** — % of capital to risk on this trade (default 2.5%).
**Trade Levels**
- **Entry Price** — Your planned or actual entry.
- **Stop-Loss Price** — Exit price if the trade goes against you.
**Profit Target**
- **Reward:Risk Ratio** — Target as multiple of risk (e.g. 4 = 4R). TP is placed at Entry ± (SL distance × R:R).
**Display**
- **Show Info Panel** — On/off for the metrics table.
- **Round to Whole Shares/Units** — On for stocks/shares (whole numbers); off for forex/fractional.
- **Panel Position** — Top Left, Top Right, Bottom Left, Bottom Right.
- **Text Size** — Tiny / Small / Normal / Large.
- **Show Level Labels** — Price labels for Entry, SL, TP on the right.
**Colors** — Customize Entry, SL, TP lines and panel colors.
---
## How it’s calculated
- **Risk $** = Capital × (Risk % ÷ 100)
- **Risk per unit** = |Entry − Stop-Loss|
- **Position size** = Risk $ ÷ Risk per unit (optionally rounded down to whole units)
- **Take-profit** = Entry + (Risk per unit × R:R) for Long, or Entry − (…) for Short
- **Reward $** = Risk $ × R:R
---
## If something looks wrong
- **“Invalid setup — Entry and SL must be different prices”** — Your Entry and Stop-Loss are the same; change one of them.
- **“0 units (rounds to 0)”** — Risk $ is too small for the distance to SL with whole units. Increase capital or risk %, or turn off **Round to Whole Shares/Units** to see fractional size.
---
*Published on PulseWire. Open source (MPL 2.0).*
Indicator
