EVA Ai + POC, Liquidity & Smart Money 1.4.1 EN💎 EVA Ai + POC, Liquidity & Smart Money 1.4.1 PRO EN — SEE WHERE THE MARKET ACCEPTED PRICE
Volume bars below a chart tell you when activity happened. EVA Volume Profile PRO shows where it happened.
The indicator maps traded volume across price, calculates POC and the Value Area, detects HVN/LVN structure, tracks directional volume and builds confirmed BSL/SSL liquidity pools. The result is a clean auction map for traders who use Volume Profile, Smart Money concepts, market structure and liquidity analysis — without flooding the candles with heavy color.
Use it for stocks, crypto and Forex, from scalping and intraday trading to swing analysis. AUTOPILOT adapts the lower timeframe, row density, node thresholds and liquidity-quality filters to the active chart.
This is a market-reading tool, not a LONG/SHORT signal generator. Its job is to show where value sits, where price may accelerate and where confirmed liquidity remains active before you build a trade plan.
━━━━━━━━━━━━━━━━━━━━
⚡ CORE MARKET MAP
• Volume Profile — horizontal volume distribution by price.
• POC — the price row with the highest calculated volume.
• Value Area — the price range containing the selected share of total volume; 70% is the standard target.
• VAH / VAL — upper and lower Value Area boundaries.
• HVN — high-volume acceptance nodes where price may slow, balance or retest.
• LVN — low-volume rejection corridors where price can travel quickly.
• Up / Down Volume — directional volume context classified from lower-timeframe candles.
• Delta — the difference between classified Up Volume and Down Volume across the profile.
• BSL / SSL — confirmed buy-side and sell-side liquidity pools around equal swing highs and lows.
• Liquidity Quality Q — a quality score using relative volume, rejection wick and spacing between confirmations.
• Nearest Targets — closest BSL, SSL, HVN and LVN with ATR distance and live state.
━━━━━━━━━━━━━━━━━━━━
🗺 HOW TO READ THE CHART
START WITH VALUE
Price between VAL and VAH is trading inside accepted value. This is usually a two-sided auction: POC attracts price, HVNs can hold rotation and the center of the profile often produces more noise than its edges.
Holding above VAH signals price discovery above value. Holding below VAL signals price discovery below value. A single breakout is not enough on its own — watch whether the boundary survives a retest and whether directional volume supports the move.
READ THE POC
The bright magenta POC marks the highest-volume price in the selected range. It acts as the profile’s center of gravity.
Price close to POC is usually balanced. Price far from POC may be building a new area of value or preparing a rotation back toward the old one. Context decides which path is active.
READ THE PROFILE SHAPE
Long horizontal rows represent heavier participation. Short rows show low acceptance.
The main histogram uses a restrained neutral palette. A thin neon rail at the profile anchor shows row-level direction: teal for Up Volume dominance, pink for Down Volume dominance. Stronger imbalance produces a brighter rail without recoloring the entire histogram.
HVN — ACCEPTANCE
Blue HVN zones mark local volume peaks. These are areas where the market previously agreed on price. Expect slower movement, consolidation, support/resistance behavior or repeated tests.
An HVN does not disappear after a touch. It represents completed volume structure, not uncollected stops.
LVN — REJECTION AND FAST TRAVEL
Amber LVN zones mark local volume valleys. Price spent less time there, so movement may accelerate through the corridor until it reaches the next HVN, Value Area boundary or active liquidity pool.
LVNs remain part of the calculated profile and update when the selected range changes.
BSL / SSL — CONFIRMED LIQUIDITY
BSL appears above confirmed equal swing highs, where short stops and breakout liquidity can cluster. SSL appears below confirmed equal swing lows, where long stops and sell-side liquidity may sit.
A pool requires at least two comparable confirmed pivots and must pass the adaptive Q filter. The script does not print every high and low as “liquidity.”
Liquidity states:
• FRESH — confirmed and not yet tested.
• TESTED — price entered the zone without completing the full sweep; the zone fades.
• OFF — still calculated but outside the active ATR work radius, so it is hidden from the chart.
• SWEPT — price cleared the far boundary; every drawing for that pool is deleted.
━━━━━━━━━━━━━━━━━━━━
📊 THE CALCULATED DASHBOARD
AUTOPILOT
Shows whether adaptive mode is active and which lower timeframe is selected.
AUCTION
Reports whether price is inside Value Area, above VAH or below VAL.
RANGE / SOURCE
Displays Visible Range, Session HD or Fixed Range and confirms whether calculations use chart candles or lower-timeframe data.
ROWS × STEP
Shows the actual number of profile rows and price increment. You always know the resolution behind the map.
UP / DOWN AND DELTA
Displays directional volume shares and the net profile imbalance.
POC / DIST
Shows POC and the current price distance from it.
NEAREST BSL / SSL
Shows pool price, distance in ATR, Q score and FRESH, TESTED or OFF state.
NEAREST HVN / LVN
Locates the closest acceptance node and fast-travel corridor.
STRUCTURE
Classifies the profile as upper concentration, lower concentration or balanced.
STATUS
Confirms developing mode, closed-bar mode or a safe data fallback.
━━━━━━━━━━━━━━━━━━━━
⚙️ THREE VOLUME PROFILE MODES
VISIBLE RANGE
Calculates only the candles currently visible on the screen. Zoom or scroll and the profile rebuilds around the market structure you are actually studying.
SESSION HD
Creates a separate profile for each selected trading session. Useful for intraday POC, daily Value Area, opening rotations and session-based support/resistance.
FIXED RANGE
Measures one specific impulse, consolidation, breakout leg or accumulation range between two adjustable time markers.
━━━━━━━━━━━━━━━━━━━━
🎯 PRACTICAL READING SCENARIOS
BALANCED AUCTION
Price is inside Value Area and close to POC or an HVN. The market is accepting price. Chasing the middle of the profile offers less structural clarity than waiting for a reaction at VAH, VAL or a nearby liquidity zone.
BULLISH PRICE DISCOVERY
Price holds above VAH, directional volume remains constructive and BSL is active overhead. The bullish auction remains valid while price accepts above value; a return below VAH weakens that read.
BEARISH PRICE DISCOVERY
Price holds below VAL, Down Volume expands and an SSL pool remains below. The bearish auction stays active until price regains the Value Area.
LVN TRAVEL
Price enters an LVN without opposing participation. The low-volume corridor may provide a faster route toward the next HVN, POC, VA boundary or liquidity target.
LIQUIDITY SWEEP
Price clears the far edge of BSL or SSL and the pool disappears. The next question is acceptance or rejection: check candle response, volume, Delta and location relative to VAH/VAL. A sweep alone does not guarantee reversal.
━━━━━━━━━━━━━━━━━━━━
🧠 AUTOPILOT, LOWER TIMEFRAME DATA AND INTEGRITY
AUTOPILOT adjusts lower-timeframe selection, row density, HVN/LVN thresholds, pivot sensitivity, pool width, minimum Q and the visible ATR radius. The developing profile updates as new confirmed microbars arrive.
Lower-timeframe OHLCV improves price allocation inside each chart candle. If the requested intrabar history is unavailable or incomplete, EVA falls back to the complete chart-candle sample rather than silently using a truncated profile.
The script uses the volume supplied by the active symbol’s data feed. On some markets, especially Forex, that may be tick volume. Pine Script cannot access a historical exchange order book or full bid/ask footprint, so EVA does not fabricate either one. The directional rail is an order-flow-style approximation derived from lower-timeframe candle direction.
Confirmed BSL/SSL pools are created from closed pivot events and are not backfilled onto earlier bars. Visible Range and developing profiles recalculate when the viewport or incoming data changes — expected behavior for a dynamic Volume Profile, not a historical trading signal being rewritten.
━━━━━━━━━━━━━━━━━━━━
⚠️ RISK NOTICE
EVA Volume Profile PRO is an analytical PulseWire indicator. It does not execute orders and is not financial advice. Markets involve risk. Every setup requires independent validation, position sizing and risk management.
━━━━━━━━━━━━━━━━━━━━
🔥 READY TO TURN THE LIQUIDITY MAP INTO A COMPLETE TRADE SCENARIO?
EVA AI Plus combines confirmed LONG/SHORT signals, Market Structure, Liquidity Sweeps, Smart Money context, Support/Resistance, Supply/Demand, Fair Value Gaps, Whale Volume, signal-quality filters, AI Advisor explanations, TP/SL, Trail, TP+ and internal statistics in one premium PulseWire workspace.
Open EVA AI Plus, add it to your favorites and request access to the 7-day test drive:
Indicator
Zone Flow S/R StrategyZone Flow S/R Strategy
📌 Strategy Overview
Zone Flow is a multi‑timeframe support/resistance strategy that uses dynamic pivot‑derived zones to identify high‑probability reversal and breakout setups.
Unlike static support/resistance lines, this 9‑level zone system (R4–R1, P, S1–S4) automatically adapts to market structure changes at each new period (Daily/Weekly/Monthly). Each zone has a configurable width (Percentage, ATR, or Fixed) to account for volatility, and a breakout threshold to filter out minor wicks.
# Unique Synergy
Most pivot strategies treat levels as static lines, leading to false breakouts. Most engulfing strategies ignore the bigger picture, catching falling knives. This strategy solves both problems by combining these components in a specific sequence:
1- Dynamic Zones + Gap State Machine (The Context)
Instead of just drawing lines, we create zones (R1-R4, P, S1-S4) with adaptive width. More importantly, the Gap State Machine tracks which gap price sits in (e.g., between R1 and Pivot). This tells us exactly where we are in the market structure. If price moves from upper Gap to lower Gap, the strategy instantly switches sentiment from Bullish to Bearish.
- Why this matters: It prevents the strategy from trading blindly; it only trades when price is transitioning between structural levels, and price retrace to the zone drastically reducing false signals in the middle of nowhere.
2- Pin Bar Sweep + Engulfing Combo (The Momentum Trigger)
A standard pin bar alone is a weak reversal signal. A standard engulfing pattern alone is common. However, when a Pin Bar sweeps the N-bar high/low (proving a breakout attempt failed) and is immediately followed by an Engulfing pattern on the next candle, this combo represents a "double confirmation" of exhaustion.
Crucially, this specific combo overrides the EMA confirmation.
- Why this matters: Strong momentum sweeps often happen against the short-term EMA trend. By allowing this specific combo to bypass the EMA, the strategy captures powerful reversals that pure trend-following strategies miss.
3- Dynamic Zone Width (The Volatility Adaptation)
Instead of using fixed support/resistance, the zone width changes based on the selected Period's ATR or Percentage.
- Why this matters: This ensures the strategy scales perfectly across any asset (Gold, Crypto, Forex) without manual width adjustments, making it robust across different volatility regimes.
4- Selective Zone Activation (The Manual Override)
Unlike standard pivot systems that force trades on every level, the Zone Selection inputs allow users to disable specific zones (e.g., turn off R3 if price often fakes out there or turn off S4 market is always get exhausted lower probability trade).
- Why this matters: This turns the strategy from a rigid algorithm into a customizable framework where the user can apply their own discretion based on historical price behavior.
5. Hierarchical EMA Architecture (The Structural Governor)
This strategy does not treat all EMAs equally. It uses a two-tier EMA system with a strict hierarchy:
Lower TF EMA (Optional & Overrideable): The Lower TF EMA on the current timeframe acts as a micro-trend filter. However, as explained above, the Pin Bar Sweep + Engulfing Combo can override this filter. Why? Because strong institutional reversals often happen against the short-term trend, and we want to capture them.
Higher TF EMA (Absolute & Non-Negotiable): Higher TF EMA on the selected Higher Timeframe acts as an "Absolute Structural Governor." Unlike the lower EMA, this filter cannot be overridden by any pattern.
For Long entries: Price must be above this HTF EMA.
For Short entries: Price must be below this HTF EMA.
Most strategies either ignore the HTF entirely. By making the HTF EMA absolute and the LTF EMA overrideable, this strategy achieves the perfect balance:
The HTF EMA prevents catastrophic drawdowns by keeping you on the right side of the bigger trend.
The LTF EMA override allows you to catch sharp, high-probability reversals within that trend without being delayed by a slow-moving micro-filter.
6. Optional Risk Architecture (The Management Layer)
The strategy includes a built-in partial-take-profit and breakeven module. By default, this module is disabled to provide a clean, straightforward 1:3 risk-reward backtest without the complexity of multiple exit orders.
This default setting allows users to evaluate the core entry logic (zones + patterns) without interference from partial exits.
However, for traders who want to reduce psychological pressure or manage Gold's notorious retracements, they can enable Allow Breakeven and Allow Partial TP. When activated, the strategy closes a percentage of the position (e.g., 50%) at a lower R:R threshold (TP1) and moves the remaining position to breakeven—locking in early profits while letting the rest of the trade run.
# Zone Calculation
The strategy calculates 9 zones using a modified pivot point formula from the selected period (Daily, Weekly, Monthly, Quarterly, Yearly):
The pivot formula can be one of 5 methods: Classic, Fibonacci, Woodie, Camarilla, or DM.
The Classic Pivot (shown below) is the most widely used and serves as the default:
Pivot (P) = (H + L + C) / 3
R1 = (2 × P) – L
S1 = (2 × P) – H
R2 = P + (H – L)
S2 = P – (H – L)
(R3, R4, S3, S4 are logical extensions of this same principle)
Additional Methods (Briefly Explained):
Fibonacci: Uses the golden ratio multipliers (0.382, 0.618, 1.000, 1.618) to place support/resistance levels between the pivot and the high/low range.
Woodie: Gives extra weight to the closing price (Formula: P = (H + L + 2C) / 4), making it more sensitive to the current session's momentum.
Camarilla: Uses multipliers based on the previous range to place levels very close to the current price, ideal for range-bound trading and scalping.
DM: Adjusts the pivot formula conditionally based on whether the close was higher or lower than the open, making it adaptive to daily sentiment.
From these, the strategy derives:
- 4 Resistance Zones (R4, R3, R2, R1) – above the pivot
- 1 Pivot Zone (P)
- 4 Support Zones (S1, S2, S3, S4) – below the pivot
Each zone is expanded by a Zone Width to create a buffer, making the levels more practical.
# Zone Width Calculation
Three modes:
- Percentage – zone width as a percentage of current price
- ATR Multiplier – width = ATR × Multiplier
- Fixed – fixed price distance
# Gap Index Mapping (0–9):
Gap 0 – Above R4 → Aggressive (no trades)
Gap 1 – Between R4 and R3 → Bearish near R4, Bullish near R3
Gap 2 – Between R3 and R2 → Bearish near R3, Bullish near R2
Gap 3 – Between R2 and R1 → Bearish near R2, Bullish near R1
Gap 4 – Between R1 and Pivot → Bearish near R1, Bullish near Pivot
Gap 5 – Between Pivot and S1 → Bearish near Pivot, Bullish near S1
Gap 6 – Between S1 and S2 → Bearish near S1, Bullish near S2
Gap 7 – Between S2 and S3 → Bearish near S2, Bullish near S3
Gap 8 – Between S3 and S4 → Bearish near S3, Bullish near S4
Gap 9 – Below S4 → Aggressive (no trades)
Based on the gap index and price action, the strategy sets allowLong or allowShort – and displays the status on the info table.
Market Status Displayed:
- Bullish – near support zones; long trades allowed
- Bearish – near resistance zones; short trades allowed
- Waiting – new period started; zones recalculating; no trades
- Aggressive – above R4 or below S4; no trades
- Zone disabled – manually disabled zone; no trades
# Entry Signals
1. Engulfing Patterns
Detects bullish and bearish engulfing with filters:
- Body Only – if true, only bodies must engulf (not full range)
- Min/Max Range – can be Percentage, ATR Multiplier, or Fixed
- Gap Allowance – max price gap between previous close and current open
- Previous or Prior Candle – at least one of the last two candles must be the opposite. color (bearish for bullish engulf; bullish for bearish engulf).
This is not a random condition. The strategy only considers trades when price is near a strong structural zone (support/resistance). Because the zone itself provides the primary context for a potential reversal, the immediate previous candle does not need to be strictly opposite in color.By relaxing the requirement to "at least one of the last two," the strategy captures valid reversals at key levels that a strict, textbook rule would miss—while remaining highly selective because it only trades near strong zones.
2. Pin Bar + Engulfing Combo (EMA Override)
Identifies hammers/shooting stars with:
- Wick/Body Ratio (Wick 3× body)Requires a clearly defined pin bar with a very small body.
- Max Body/Range (Body is at most 20% of range) Ensures the body is genuinely small relative to the total range. This is the textbook definition of a pin bar/hammer. Captures true rejection candles.
- Min Wick/Range (70% of range) This is the classic pin bar definition. A 70%+ wick means price aggressively rejected the level and reversed.
- Sweep Lookback – bullish pinbar must break the lowest low of the previous N bars;
bearish must break the highest high
a pin bar that sweeps a recent extreme (lookback) and the very next candle forms an engulfing pattern in the same direction. This combo overrides the Lower TF EMA confirmation – a unique feature that captures strong momentum after a sweep.
Combined Entry Requirements
All of the following must be true:
1. Valid engulfing or pin+engulf combo
2. Pattern occurs near a zone (open inside zone boundaries or crossing it)
3. Market status aligns with trade direction
4. Daily trade limit not exceeded (default: 2)
5. Relevant zone is enabled
6. Price is on the correct side of EMAs (unless overridden by combo)
7. HTF EMA confirms (if enabled)
8. RSI not overbought/oversold (if enabled)
9. Not within the no‑trade window (if enabled)
-----------------------------------------------------
# Confirmation Filters
Current TF EMA – ensures micro‑trend alignment. Overridden by pin+engulf combo.
Higher TF EMA (default 150 on 1H) – filters out counter‑trend moves in the bigger picture.
RSI – prevents buying above 70 and selling below 30.
Bollinger Bands – blocks trades when volatility is too low (BB width below threshold).This filter is specifically designed for assets that range heavily—choppy, sideways markets.
No‑Trade Window – avoids end‑of‑day volatility (active only for timeframes ≤15min).
# Risk & Position Management
1- Position Sizing:
- Risk per trade – percentage of equity for first trade, separate for second
- Position size = (Account Risk) / (Entry – SL distance).
- Second trade does not increment the daily trade counter:
This is a deliberate design choice. The daily trade counter tracks new trade initiations, not total positions. The second trade (pyramiding) is considered a continuation of the existing position, not a new independent decision. This ensures the strategy can scale into strong trends without consuming the daily limit, while still respecting the maximum number of new entries per session.
2-Stop Loss Options:
- Low-High – entry bar low/high ± buffer Tight, reactive stops. Best for scalping or when you want the SL to follow the immediate price action of the entry candle.
- Swing high/low – N-bar low/high ± buffer Broader, structural stops. Ideal for swing trading or when you want the SL to respect recent market structure rather than a single bar.
- Zone – zone boundary ± buffer Structural stops aligned with pivot levels. Best when you want the SL to be placed exactly at the structural support/resistance level that defines the trade.
- Fixed distance – fixed price distance Simple, static stops. Useful when you know your exact risk tolerance in dollar/pip terms and want a consistent SL distance regardless of volatility.
- ATR Multiplier – entry ± (ATR × multiplier) Volatility-adaptive stops. Best for Gold's changing volatility—widens during news/high volatility, tightens during calm periods.
3- Take Profit:
- Main R:R ratio – main R:R ratio (default 1:3), plus optional partial TP and breakeven at a lower R:R ratio.
- Partial TP – close a percentage of position at a lower R:R (TP1)
- Breakeven – optionally move stop to entry at TP1
4- Trade Counter Reset:
- For TF ≤ 15m: resets at NY (9:30 AM) and London (3:30 AM) starts (configurable)
This aligns with Gold's session-specific volatility and allows fresh participation in each session while preventing over-trading within a single session.
- For TF > 15m: resets once per day at session start (Every new day) Session-specific behavior is less relevant on higher timeframes, and a simple daily cap is more appropriate for swing trading.
5- No‑Trade Window:
- Avoids high‑volatility periods (e.g., end of day)
- Active only for TF ≤ 15m (16:00 PM – 18:30 PM NY time, configurable) End-of-day volatility spikes can cause excessive slippage and erratic price action on short timeframes. on TF > 15 The window is too short to be meaningful; higher timeframe traders are less affected by brief volatility spikes.
6- Session Close:
- TF ≤ 15m: can close at day end and/or week end (configurable). Scalping trades on 1m–15m charts typically last minutes to a few hours. These trades are highly sensitive to Overnight gaps, Weekend gaps
- 15m < TF ≤ 10h: only week end. Swing trading on 30m–4H charts typically lasts hours to several days.
- TF > 10h: feature disabled. Position trading on daily+ charts lasts days to weeks. These trades aim to capture large macro moves.
# Chart Display
- Zone boxes – semi‑transparent red/pink with labels (R4…S4), auto‑cleanup (max 55 periods)
- Trade management lines – entry (white), SL (red), TP (green), TP1/breakeven (dashed),
with green/red fills; auto‑cleanup ((4) * max 125)
- Info table (top‑right) :
1. shows Market Status(Bullish/Bearish/Aggressive/Waiting).
2. EMA confirmations.
3. Zone Width, Breakout threshold.
4. Engulf range max min.
5. SL settings(SL refrence, sL bufer)
- EMA plots – light blue (lower TF) and light red (higher TF)
- Signal shapes – hidden by default (can be enabled via style settings)
- arrowdown shapes - "Reset trade counter"
- Background 1 color – yellow during no‑trade window
- Background 2 color – white close all position on week/day end.
UI Note: Inputs are hidden from the status line to keep your chart clean. All settings (zones, EMAs, risk, patterns) remain fully adjustable in Settings → Inputs.
# Default Settings – Optimized for XAUUSD (Gold)
All default values have been calibrated specifically for Gold's typical volatility and intraday structure.
(Setting : Default : Why This Works for Gold)
----------------------------------------------------------------------------------------
Period : Daily : Gold respects daily highs/lows as key structural levels.
-----------------------------------------------------------------------------------------
Pivot Type : Classic : Most widely used and reliable for Gold.
-----------------------------------------------------------------------------------------
Zone Width : ATR (0.053× ATR(14)) : ATR(14) provides a stable, week-to-week view of Gold's volatility (roughly two trading weeks of data).Adapts to Gold's daily volatility (Zone Width often $4–$10 range).
-----------------------------------------------------------------------------------------
Breakout Threshold : 7% of zone width : Zone width ≈ $3.00–$10.00 (Daily ATR × 0.053). 7% ≈ $0.21–$0.70 (21–70 ticks)—filters noise wicks, captures genuine breaks.Prevents false transitions caused by standard stop-hunting wicks
-----------------------------------------------------------------------------------------
Engulfing Range : ATR(14) (0.375× – 2.5×) : ATR(14) sits in the "sweet spot"—responsive enough to capture shifts in Gold's volatility relatively quickly, yet long enough to smooth out the daily noise and provide a reliable, consistent measure. Captures meaningful moves $3–$15—ensures candle has enough size to be meaningful, rejecting tiny $0.30–$0.50 noise patterns, while filtering out massive blow-off spikes (> $20–$25 on 15m).
-----------------------------------------------------------------------------------------
Pin Bar Sweep : 12 bars : 12 bars – Calibrated for Gold's 3-hour intraday cycle and session transitions. Long enough to capture genuine liquidity grabs, short enough to avoid outdated levels.
-----------------------------------------------------------------------------------------
Risk per trade : 2% (1st), 1% (2nd) : Balances risk with Gold's occasional false breakouts. For Gold's volatile nature, 2%-1% provides the best balance between survival and growth.
-----------------------------------------------------------------------------------------
Risk:Reward : 1:3 : Gold routinely moves 1.5–2× its ATR in a single directional push. A 1:3 target is well within Gold's typical daily range.
-----------------------------------------------------------------------------------------
Stop-Loss Reference : ATR Multiplier : For Gold's volatile nature, a static stop-loss (Fixed or Low-High) cannot adapt to changing volatility. ATR-based SL scales with market conditions—widening during high volatility (news, session opens) and tightening during calm periods. This ensures the stop-loss is always "fair" relative to current market conditions, preventing premature stops during normal volatility spikes
-----------------------------------------------------------------------------------------
Stop-Loss Multiplier : 1.8× ATR(14) : A 1.8× ATR(14) stop-loss represents 1.8 times Gold's average 14-period range. Why 1.8× and not 2.0× or 1.5×? Backtesting revealed that 1.8× is the "sweet spot"—wide enough to survive Gold's normal volatility spikes without being stopped out by noise, yet tight enough to limit losses
-----------------------------------------------------------------------------------------
Current TF EMA : 21 (Enabled, Overrideable) : On 15m chart = 5.25 hours—perfectly captures Gold's average intraday move length. Can be overridden by Pin Bar + Engulfing Combo to catch institutional reversals that occur against the short-term trend.
-----------------------------------------------------------------------------------------
Higher TF EMA : 150 on 1H : On Gold, a 150-period EMA on a 1H chart represents roughly 6.5 days (one full trading week) of data. By making this filter absolute, the strategy guarantees it will never take a counter-trend trade against the weekly macro-structure.trend.
-----------------------------------------------------------------------------------------
Filter (RSI) : length 12 : Most traders default to RSI(14), but RSI(12) is intentionally faster for Gold's volatile intraday moves. Gold often spikes into overbought/oversold territory and reverses quickly. A 12-period RSI reacts ~15% faster than RSI(14), catching these reversals earlier while remaining smooth enough to avoid excessive whipsaws.
-----------------------------------------------------------------------------------------
Filter (Bollinger Bands) : Disabled by default : Gold is historically a trending asset with strong directional moves. A low-volatility filter would unnecessarily block valid entries during these trends. Designed for range-bound assets (choppy crypto, certain forex crosses)—enable it only if your market consolidates heavily.
-----------------------------------------------------------------------------------------
These values are a starting point – you may adjust them for other assets or personal risk tolerance.
# Important Notes on Backtest Realism
- Commission – Most ECN/raw-spread brokers charge $3.00–$3.50 per side (round-turn commission of $6.00- $7.00) for 1 standard lot (100 oz) of XAUUSD. Standard accounts usually build the fee into a wider spread instead of charging a separate cash. This strategy deducts $3.50 per entry and $3.50 per exit ($0.035 × 100 oz)round-turn commission of $7.00. Adjust this to match your broker's exact fees.
- 4 ticks Slippage - For XAUUSD, 1 tick = $0.01 per ounce. 4 ticks = **$0.04 per ounce (unit)**. Accounts for real-world price . Prevents overly optimistic backtest equity curves.
Always adjust the commission value to your broker's exact fee structure before relying on the results.
"A backtest without realistic commission and slippage is a fantasy. A backtest with realistic commission and slippage is a truthful reflection of what you can expect when trading live."
- Intra-Bar Execution: The strategy uses calc_on_every_tick = true, meaning it recalculates on every price tick during real-time trading. This allows the breakeven and partial TP logic to trigger immediately when price hits TP1, protecting the trade from intra-bar reversals.
Note: Backtests use OHLC data only, so intra-bar fills and breakeven triggers cannot be perfectly simulated. Real-time performance may differ from backtest results due to this limitation
# The Core Innovation (Why This Isn't Just a Mashup)
This strategy is built on a three-layer validation system. Each layer solves a specific problem that the other layers cannot solve alone.
Layer 1 (The Structure): Dynamic Pivot Zones
Layer 2 (The Trigger): Pin-Bar Sweep + Engulfing Combo
Layer 3 (The Execution): Gap State Machine
Here is how they interdepend to create a unique edge:
1. Adaptive Pivot Mathematics (The "Regime Matching" Logic)
Instead of offering multiple pivot types just for the sake of it, this strategy provides them so the trader can match the mathematical formula to the market's current behavioral regime:
Why this matters: Most strategies lock you into one formula. This strategy acknowledges that price dynamics change, and it gives you the mathematical weapon to adapt without rewriting the entire code.
2. The "Liquidity Grab" Trigger (Sweep + Engulfing Combo)
This is the most critical edge of the strategy. A standard Engulfing pattern is common. A standard Pin Bar is common. But when they occur sequentially—a Pin Bar that sweeps the 12-bar extreme, immediately followed by an Engulfing candle—it represents a textbook institutional "liquidity grab."
- The Logic: Large players often push price to sweep obvious stop-losses (above highs or below lows) before reversing the trend.
- The Override: Crucially, this specific combo overrides the Lower TF EMA confirmation.
- Why this is a breakthrough: Standard trend-following strategies with a hard EMA filter will miss these reversals because price is moving against the EMA in the short term. By programming this specific override, the strategy captures the exact moment of institutional reversal—catching the move before the EMA flips and the trend-followers finally enter.
3. The Gap State Machine (Dynamic Sentiment Tracking)
Unlike static support/resistance scripts that just plot lines and wait for touches, this strategy features a state machine that tracks which of the 9 gaps (between R4-R1, Pivot, S1-S4) the price currently occupies.
- The Mechanism: A Breakout Threshold (default 7% of zone width) acts as a "dead-zone" filter. Price must exceed this threshold to officially transition from one gap to another.
- The Alpha: This prevents the strategy from whipsawing during minor noise. When price crosses from Gap 4 (between R1 and Pivot) into Gap 3 (between R2 and R1), the strategy instantly and autonomously switches market status from "Bearish" to "Bullish" or vice versa.
4. Selective Zone Activation (Strategic Discretion)
- This strategy allows the user to completely disable specific zones (e.g., turn off R3).
- The Value: By disabling a weak level, the user forces the strategy to wait for the next stronger level, instantly increasing the win rate and filtering out historically weak signals without altering any other code.
5. Non-Invasive Risk Architecture (Clean Defaults)
For traders who want to reduce psychological pressure or optimize for Gold's notorious retracements, they can enable these modules. When activated, the strategy closes % of the position at a lower R:R threshold and moves the remaining position to breakeven—locking in profits while letting the rest run.
In Summary: The "Mashup" Justification
This is not a random collection of indicators.
1. The State Machine provides the structural context.
2. The Pin+Engulf combo provides the high-conviction trigger that overrides slow-moving filters.
3. The Selectable Pivot Types provide the mathematical adaptability to different assets.
4. The Selectable Zones provide the manual discretion to avoid historical losing levels.
5. The Disabled TP/BE by default provides a clean baseline for evaluating the core logic.
Author: Awab_Hassan
Strategy
Pivot Sniper Method [trade_w_samet]🎯 Pivot Sniper Method
Pivot Sniper Method is a confirmed pivot-reversal, signal-quality, session-filtering, trade-mapping, alert, and loaded-history statistics indicator designed to convert confirmed price pivots into a structured chart-review workflow.
The script is built around one central idea:
Not every confirmed pivot should be treated as an equal-quality reversal setup.
Instead of displaying every pivot as an identical signal, Pivot Sniper Method evaluates each confirmed pivot through a five-part Signal Strength model, applies the selected directional and session rules, maps a complete Entry / Stop Loss / TP1 / TP2 / TP3 structure, manages optional Break-Even behavior, and records the result through an internal R-based tracker.
When an eligible pivot is confirmed, the script can:
• Display a confirmed BUY or SELL label
• Show the calculated Signal Strength percentage directly below the direction label
• Evaluate Pivot Distance, Wick Quality, Confirmation Candle, Volume Participation, and Trend Alignment
• Apply Bullish, Bearish, or Both directional bias
• Restrict new signals to London, New York, London + New York, All Sessions, or a Custom session
• Apply an adjustable signal cooldown
• Calculate the Entry at the confirmation-candle close
• Calculate Stop Loss using ATR, Pivot Level, Pivot + ATR Buffer, or Signal Candle
• Calculate independently adjustable TP1, TP2, and TP3 targets
• Move the active Stop Loss to Break-Even after TP1 or TP2
• Add an optional favorable Break-Even tick offset
• Replace the current active tracked trade when a new eligible signal appears
• Display active Entry, Stop / Break-Even, TP1, TP2, and TP3 lines and labels
• Remove the separate Entry line and label after Break-Even becomes active
• Display compact tooltips containing signal, price, risk, target, and status information
• Track Trades, Win Rate, NET R, Average R, TP1 / TP2 / TP3 hit rates, and Break-Even results
• Display a compact premium desktop dashboard
• Display a reduced Phone Mode dashboard
• Move the dashboard to any chart corner
• Support Auto, Dark, Light, and Phone visual modes
• Support static alertcondition() events
• Support one combined “Any alert() function call” workflow
• Include symbol, timeframe, strength, Entry, Stop, targets, Stop Loss mode, Break-Even mode, and session context in dynamic alerts
The purpose of the script is to provide a transparent framework for studying confirmed pivots, setup quality, session context, predefined risk, multiple reward targets, Break-Even behavior, and bar-based historical outcomes.
It is not financial advice.
It is not an automated trading system.
It does not execute broker orders.
It does not calculate position size.
It does not guarantee that a confirmed pivot will produce a reversal.
It does not guarantee that historical Win Rate or NET R will continue in future market conditions.
It does not include spread, commission, slippage, latency, financing, taxes, partial fills, or broker-specific execution.
It does not reconstruct the exact intrabar path inside historical candles.
━━━━━━━━━━━━━━━━━━━━━━
📌 OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━
At a high level, Pivot Sniper Method performs the following sequence:
• Searches price for confirmed pivot lows and pivot highs.
• Requires the selected number of completed candles on the right side of a pivot.
• Rejects simultaneous bullish and bearish pivot confirmation on the same calculation.
• Evaluates the selected Trend Bias.
• Evaluates the selected Trading Session.
• Evaluates the signal cooldown.
• Calculates a 0–100 Signal Strength score.
• Rejects signals below the selected minimum strength when the strength filter is enabled.
• Displays a BUY or SELL label only when all active signal rules pass.
• Opens a tracked trade at the close of the confirmation candle.
• Selects a Stop Loss using the active Stop Loss Mode.
• Uses ATR as a safety fallback when a structural Stop Loss is invalid.
• Calculates TP1, TP2, and TP3 from the actual Entry-to-Stop risk distance.
• Tracks target and stop touches from the candle after entry.
• Moves the active Stop Loss to Break-Even after the selected target condition.
• Replaces an active tracked trade at the current close when a new eligible signal appears.
• Records each completed trade in R.
• Updates a compact dashboard with state, trade, performance, and quality information.
• Generates static and dynamic PulseWire alert events.
The script does not use machine learning.
It does not claim to predict every market reversal.
Its dashboard is not PulseWire Strategy Tester.
Its statistics are calculated internally from the script’s own confirmed-signal, OHLC-touch, replacement-exit, and Break-Even rules.
━━━━━━━━━━━━━━━━━━━━━━
🧠 CORE IDEA
━━━━━━━━━━━━━━━━━━━━━━
A pivot low identifies a price point that is lower than the selected number of candles on both sides.
A pivot high identifies a price point that is higher than the selected number of candles on both sides.
Confirmed pivots can provide useful reversal context, but a pivot alone does not answer:
• whether the setup agrees with the selected directional bias
• whether the setup occurs during the selected trading session
• whether the pivot candle contains a meaningful rejection wick
• whether price has moved sufficiently away from the confirmed pivot
• whether the confirmation candle supports the intended direction
• whether volume participation is elevated or ordinary
• whether price and the selected EMA structure support the direction
• where Stop Loss should be placed
• how the trade should be mapped in R
• when Break-Even should become active
• how a new signal should affect an existing tracked trade
• how the setup behaved under the script’s historical bar-touch rules
Pivot Sniper Method therefore treats the pivot as the first stage of a complete process rather than the final decision.
The complete workflow is:
potential pivot
→ right-side pivot confirmation
→ same-bar conflict rejection
→ directional-bias validation
→ session validation
→ cooldown validation
→ five-part quality scoring
→ minimum-strength validation
→ BUY or SELL signal
→ confirmation-candle Entry
→ Stop Loss selection
→ TP1 / TP2 / TP3 mapping
→ active-trade management
→ optional Break-Even
→ TP3, Stop, Break-Even, or replacement exit
→ internal R result
→ dashboard update
→ alert event
━━━━━━━━━━━━━━━━━━━━━━
🧩 WHY THIS IS NOT A SIMPLE PIVOT MARKER
━━━━━━━━━━━━━━━━━━━━━━
A basic pivot script can stop after placing a shape on a confirmed swing high or swing low.
Pivot Sniper Method continues beyond pivot detection.
Each eligible setup passes through a coordinated structure:
confirmed price pivot
→ 0–100 quality evaluation
→ bias and session permission
→ structured Entry
→ selectable Stop Loss model
→ independent TP1, TP2, and TP3 targets
→ optional Break-Even transition
→ live target-status updates
→ active-trade replacement logic
→ historical R accounting
→ compact statistics dashboard
→ static and dynamic alerts
The pivot module defines the confirmed reversal location.
The Signal Strength module evaluates quality.
The Trend Bias module controls permitted directions.
The Time Filter controls when new setups may be accepted.
The trade-mapping module converts the setup into explicit price levels.
The Break-Even module changes active risk only after the selected target is confirmed.
The statistics module summarizes the exact results produced by those rules.
The alert module communicates signal and trade-management events.
These modules are not unrelated indicators placed together.
They form one process for identifying, filtering, mapping, monitoring, and reviewing confirmed pivot-reversal setups.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ HOW THE SCRIPT WORKS
━━━━━━━━━━━━━━━━━━━━━━
The script runs directly on the main price chart.
It calculates confirmed price pivots using independently adjustable left-side and right-side lengths for highs and lows.
The default pivot configuration is:
• Pivot High Left Bars: 10
• Pivot High Right Bars: 10
• Pivot Low Left Bars: 10
• Pivot Low Right Bars: 10
The signal engine then combines:
• confirmed pivot status
• Bullish / Bearish / Both bias permission
• selected session permission
• Signal Strength threshold
• cooldown permission
• same-bar dual-pivot rejection
• confirmed chart-bar status
A BUY signal is based on a confirmed pivot low.
A SELL signal is based on a confirmed pivot high.
The signal label is placed on the confirmation candle, not on the original historical pivot candle.
The Entry is also stored at the close of the confirmation candle.
This separation is important:
Pivot Price
The historical swing level that became confirmed after the selected right-side bars.
Signal Candle
The later candle where the script knows the pivot exists and all active filters pass.
Entry Price
The close of that later signal-confirmation candle.
━━━━━━━━━━━━━━━━━━━━━━
🔍 PIVOT DETECTION MODEL
━━━━━━━━━━━━━━━━━━━━━━
Pivot High Left Bars determines how many candles to the left must have lower highs than a potential pivot high.
Pivot High Right Bars determines how many completed candles must form to the right before the potential pivot high is confirmed.
Pivot Low Left Bars determines how many candles to the left must have higher lows than a potential pivot low.
Pivot Low Right Bars determines how many completed candles must form to the right before the potential pivot low is confirmed.
Higher left and right values generally identify larger and less frequent swing structures.
Lower values generally identify smaller and more frequent structures.
The high and low settings are independent.
This allows users to study symmetrical configurations such as 10 / 10 for both directions, or asymmetrical configurations when market behavior requires different sensitivity for pivot highs and pivot lows.
The central pivot calculation is:
float confirmedPivotHigh = ta.pivothigh(
high,
leftHighInput,
rightHighInput
)
float confirmedPivotLow = ta.pivotlow(
low,
leftLowInput,
rightLowInput
)
bool rawBuySignal =
barstate.isconfirmed and
not na(confirmedPivotLow)
bool rawSellSignal =
barstate.isconfirmed and
not na(confirmedPivotHigh)
These functions return a confirmed pivot value only after the required right-side bars exist.
A confirmed pivot does not automatically become a signal.
It must still pass:
• same-bar conflict rejection
• Trend Bias
• Trading Session
• Signal Strength
• cooldown
━━━━━━━━━━━━━━━━━━━━━━
⏳ PIVOT CONFIRMATION AND SIGNAL TIMING
━━━━━━━━━━━━━━━━━━━━━━
This section is essential for correct interpretation.
The script uses confirmed pivot functions.
A pivot is not known on the original pivot candle.
For example, with Pivot Low Right Bars set to 10:
• the potential pivot low occurs
• ten additional candles must complete to its right
• the pivot becomes confirmed on the later calculation candle
• the BUY candidate can then be evaluated
The signal label is displayed on the later confirmation candle.
The trade Entry is stored at the close of that confirmation candle.
The script does not backdate the BUY or SELL trade label to the original pivot candle.
This means:
• the pivot price belongs to an earlier historical candle
• the signal becomes available later
• the displayed Entry reflects the later confirmation close
• increasing right-side bars increases confirmation delay
• decreasing right-side bars confirms smaller structures earlier
The script also requires barstate.isconfirmed for raw pivot candidates.
Signals are therefore based on completed chart candles.
This reduces unfinished current-candle changes, but it does not remove the inherent delay required by pivot confirmation.
━━━━━━━━━━━━━━━━━━━━━━
🟢 CONFIRMED BUY LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A BUY candidate begins when a pivot low is confirmed.
The candidate is rejected when a pivot high is also confirmed on the same calculation.
The remaining BUY candidate must satisfy:
• Trend Bias is Bullish or Both
• the selected Trading Session is active
• the BUY Signal Strength meets the minimum threshold when filtering is enabled
• the cooldown is ready
• the chart bar is confirmed
When accepted, the script displays:
▲ BUY
strength%
The strength percentage appears on the second line to keep the label compact.
The compact two-line BUY label is constructed as:
string buyLabelText =
showStrengthOnSignalInput
? "▲ BUY " + str.tostring(buySignalStrength) + "%"
: "▲ BUY"
The SELL label uses the mirrored ▼ SELL format.
The label is placed below the signal candle.
The BUY tooltip can display:
• Confirmed BUY
• Signal Strength
• Confirmed Pivot price
The tracked Entry is the signal-confirmation candle close.
The BUY Stop Loss is placed below Entry using the selected Stop Loss Mode.
TP1, TP2, and TP3 are calculated above Entry from the actual Entry-to-Stop risk distance.
━━━━━━━━━━━━━━━━━━━━━━
🔴 CONFIRMED SELL LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A SELL candidate begins when a pivot high is confirmed.
The candidate is rejected when a pivot low is also confirmed on the same calculation.
The remaining SELL candidate must satisfy:
• Trend Bias is Bearish or Both
• the selected Trading Session is active
• the SELL Signal Strength meets the minimum threshold when filtering is enabled
• the cooldown is ready
• the chart bar is confirmed
When accepted, the script displays:
▼ SELL
strength%
The strength percentage appears on the second line.
The label is placed above the signal candle.
The SELL tooltip can display:
• Confirmed SELL
• Signal Strength
• Confirmed Pivot price
The tracked Entry is the signal-confirmation candle close.
The SELL Stop Loss is placed above Entry using the selected Stop Loss Mode.
TP1, TP2, and TP3 are calculated below Entry from the actual Entry-to-Stop risk distance.
━━━━━━━━━━━━━━━━━━━━━━
💪 SIGNAL STRENGTH MODEL
━━━━━━━━━━━━━━━━━━━━━━
Signal Strength is a 0–100 quality score.
The final score contains five components worth up to 20 points each:
1. Pivot Distance
2. Wick Quality
3. Confirmation Candle
4. Volume Participation
5. Trend Alignment
The score is intended to compare the internal characteristics of confirmed pivot setups under the same script rules.
It is not a probability forecast.
A 75% label does not mean there is a guaranteed 75% probability of profit.
It means the setup received 75 points out of the script’s 100-point quality model.
The Minimum Signal Strength input controls the required score.
Default:
55
When the filter is enabled:
• scores below the minimum are rejected
• scores equal to or above the minimum are eligible
• lower thresholds generally create more signals
• higher thresholds generally create fewer signals
The strength percentage can be hidden from the BUY / SELL label without disabling the strength filter.
The five component values are combined into the final score:
int buySignalStrength = int(math.round(
math.min(
buyPivotDistanceScore +
buyWickScore +
buyCandleScore +
volumeScore +
buyTrendScore,
100.0
)
))
int sellSignalStrength = int(math.round(
math.min(
sellPivotDistanceScore +
sellWickScore +
sellCandleScore +
volumeScore +
sellTrendScore,
100.0
)
))
A score is therefore the sum of five internal measurements, capped at 100.
━━━━━━━━━━━━━━━━━━━━━━
📏 PIVOT DISTANCE COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Pivot Distance evaluates how far the confirmation-candle close is from the confirmed pivot relative to ATR.
For BUY candidates, the model measures the distance from the confirmed pivot low to the current close.
For SELL candidates, it measures the distance from the current close to the confirmed pivot high.
The normalized value is capped internally.
The maximum contribution is 20 points.
This component does not claim that a larger distance is always better.
It only measures the amount of price separation used by this quality model.
━━━━━━━━━━━━━━━━━━━━━━
🕯️ WICK QUALITY COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Wick Quality evaluates the rejection wick on the original pivot candle.
For BUY candidates:
• lower wick size is compared with the full pivot-candle range
For SELL candidates:
• upper wick size is compared with the full pivot-candle range
A larger relevant wick can contribute more points, up to 20.
This component attempts to represent rejection behavior at the confirmed swing.
A large wick does not guarantee reversal continuation.
━━━━━━━━━━━━━━━━━━━━━━
📊 CONFIRMATION CANDLE COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
The Confirmation Candle component evaluates the candle where the pivot becomes confirmed and the signal is processed.
The model considers:
• body size relative to the full candle range
• bullish close direction for BUY candidates
• bearish close direction for SELL candidates
The body ratio contributes most of the component score.
A directional close can add an additional internal bonus.
The maximum contribution is 20 points.
The confirmation candle is not the original pivot candle.
━━━━━━━━━━━━━━━━━━━━━━
🔊 VOLUME PARTICIPATION COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Volume Participation compares current volume with an adjustable volume average.
Default volume length:
20
Higher relative volume can contribute more points, up to 20.
The component is internally capped.
When usable volume data is unavailable, the script applies a neutral fallback contribution instead of automatically assigning zero.
Volume behavior differs across asset classes and data feeds.
For some symbols, displayed volume can represent exchange volume.
For others, it can represent tick activity or a provider-specific value.
━━━━━━━━━━━━━━━━━━━━━━
📈 TREND ALIGNMENT COMPONENT
━━━━━━━━━━━━━━━━━━━━━━
Trend Alignment uses an adjustable EMA.
Default EMA length:
50
For BUY candidates, the component evaluates:
• whether price is above the EMA
• whether the EMA is rising
For SELL candidates, it evaluates:
• whether price is below the EMA
• whether the EMA is falling
Each condition contributes part of the 20-point component.
This EMA is used as one component of Signal Strength.
It is not a separate hard directional filter.
A setup can still receive points from the other four components when Trend Alignment is weak.
━━━━━━━━━━━━━━━━━━━━━━
🧭 TREND BIAS
━━━━━━━━━━━━━━━━━━━━━━
Trend Bias controls which signal directions are permitted.
Available modes:
• Bullish
• Bearish
• Both
Bullish
Allows only confirmed BUY signals.
Bearish
Allows only confirmed SELL signals.
Both
Allows confirmed signals in both directions.
Trend Bias does not change pivot detection.
It changes which confirmed candidates are allowed to become signals and tracked trades.
The final signal gate combines pivot confirmation, directional permission, session permission, Signal Strength, and cooldown:
bool buySignal =
buyCandidate and
bullishBiasAllowed and
timeFilterPassed and
buyStrengthPassed and
cooldownReady
bool sellSignal =
sellCandidate and
bearishBiasAllowed and
timeFilterPassed and
sellStrengthPassed and
cooldownReady
Only candidates that pass every active condition become BUY or SELL signals.
━━━━━━━━━━━━━━━━━━━━━━
🕒 SESSION FILTER
━━━━━━━━━━━━━━━━━━━━━━
The Trading Session input controls when new signals can be accepted.
Available modes:
• All Sessions
• London
• New York
• London + New York
• Custom
London uses:
08:00–17:00
Europe/London time
New York uses:
09:30–16:00
America/New_York time
London + New York accepts signals during either defined session.
Custom allows the user to define a session and select:
• Exchange
• UTC
• Europe/London
• America/New_York
• Europe/Istanbul
• Asia/Tokyo
The session filter affects new entries only.
An already active tracked trade continues to be managed outside the selected session.
The dashboard displays whether the current session rule is OPEN or CLOSED.
━━━━━━━━━━━━━━━━━━━━━━
⏳ COOLDOWN AND CONFLICT HANDLING
━━━━━━━━━━━━━━━━━━━━━━
Signal Cooldown Bars defines the minimum number of completed candles required between accepted signals.
Default:
0
A value of 0 disables additional cooldown filtering.
Higher values reduce how frequently new signals can be accepted.
When a pivot high and pivot low are both confirmed on the same calculation, the script rejects both candidates.
This prevents contradictory BUY and SELL signals from being accepted on the same candle.
━━━━━━━━━━━━━━━━━━━━━━
🎯 ENTRY AND ACTIVE-TRADE REPLACEMENT MODEL
━━━━━━━━━━━━━━━━━━━━━━
The Entry is stored at the close of the accepted signal candle.
The script maintains one active tracked trade.
However, new eligible signals are not ignored while a trade is active.
When a new eligible BUY or SELL signal appears:
• the current active trade is valued at the new signal candle’s close
• its current R result is added to statistics
• its active lines and labels are removed
• the new signal opens a new tracked trade
This behavior applies to eligible same-direction and opposite-direction signals.
The replacement exit is not a broker fill.
It is an internal close-based accounting rule used to keep only one active tracked trade.
Because replacement exits can occur before TP3, Stop Loss, or Break-Even, NET R can include partial positive or negative R outcomes.
━━━━━━━━━━━━━━━━━━━━━━
🛑 STOP LOSS SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes four Stop Loss modes:
• ATR
• Pivot Level
• Pivot + ATR Buffer
• Signal Candle
ATR
BUY:
Entry − ATR × multiplier
SELL:
Entry + ATR × multiplier
Default ATR length:
14
Default ATR multiplier:
2.0
Pivot Level
BUY:
confirmed pivot low
SELL:
confirmed pivot high
Pivot + ATR Buffer
BUY:
confirmed pivot low − ATR × pivot buffer
SELL:
confirmed pivot high + ATR × pivot buffer
Default pivot buffer:
0.25 ATR
Signal Candle
BUY:
signal candle low
SELL:
signal candle high
The script validates the selected Stop Loss.
For BUY, Stop Loss must be meaningfully below Entry.
For SELL, Stop Loss must be meaningfully above Entry.
When the selected structural stop is invalid, the script uses the ATR Stop Loss as a safety fallback.
The actual risk distance is:
absolute difference between Entry and the validated Stop Loss
That distance becomes 1R for all target calculations.
The requested Stop Loss is selected from the active mode:
requestedStopPrice :=
stopLossModeInput == "ATR"
? activeEntryPrice - atrFallbackDistance
: stopLossModeInput == "Pivot Level"
? confirmedPivotLow
: stopLossModeInput == "Pivot + ATR Buffer"
? confirmedPivotLow - atrValue * pivotBufferATRInput
: low
For SELL trades, the same logic is mirrored above Entry.
The script then validates the requested structural stop.
When the selected price is not on the correct side of Entry, ATR is used as the fallback.
━━━━━━━━━━━━━━━━━━━━━━
🏆 TP1 / TP2 / TP3 SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
TP1, TP2, and TP3 are independently adjustable.
Default values:
• TP1: 1R
• TP2: 2R
• TP3: 3R
For BUY:
target = Entry + risk distance × selected R multiple
For SELL:
target = Entry − risk distance × selected R multiple
TP1 and TP2 are intermediate target events.
TP3 is the final target and closes the active tracked trade.
When TP3 is touched:
• TP1 is also recorded if it was not already recorded
• TP2 is also recorded if it was not already recorded
• TP3 is recorded
• the trade closes at the selected TP3 R value
Users should normally keep:
TP1 < TP2 < TP3
The script allows independent values, so users are responsible for maintaining a logical target sequence.
After the validated Stop Loss is stored, the script defines 1R and calculates each target:
activeRiskDistance :=
math.max(
math.abs(activeEntryPrice - activeStopPrice),
syminfo.mintick
)
activeTP1Price :=
activeTradeDirection == 1
? activeEntryPrice + activeRiskDistance * tp1RRInput
: activeEntryPrice - activeRiskDistance * tp1RRInput
activeTP2Price :=
activeTradeDirection == 1
? activeEntryPrice + activeRiskDistance * tp2RRInput
: activeEntryPrice - activeRiskDistance * tp2RRInput
activeTP3Price :=
activeTradeDirection == 1
? activeEntryPrice + activeRiskDistance * tp3RRInput
: activeEntryPrice - activeRiskDistance * tp3RRInput
The target calculations therefore remain proportional to the actual Entry-to-Stop distance.
━━━━━━━━━━━━━━━━━━━━━━
🟡 BREAK-EVEN SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
Break-Even Mode includes:
• Off
• After TP1
• After TP2
After TP1
The Stop Loss moves to Entry after the TP1-touch candle closes.
After TP2
The Stop Loss moves to Entry after the TP2-touch candle closes.
The updated Break-Even stop applies from the following candle.
An optional favorable tick offset can be added.
For BUY:
Break-Even = Entry + offset
For SELL:
Break-Even = Entry − offset
When Break-Even becomes active:
• the Stop Loss line changes to the Break-Even color
• the Stop label changes from SL to BE
• the separate Entry line is deleted
• the separate Entry label is deleted
• only the BE level remains at or near Entry
This prevents Entry and Break-Even labels from overlapping at the same price.
A Break-Even stop with zero offset produces approximately 0R.
A positive favorable offset can produce a small positive R result.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ SAME-CANDLE STOP AND TARGET HANDLING
━━━━━━━━━━━━━━━━━━━━━━
Historical OHLC candles do not reveal the exact sequence of all intrabar price movement.
A candle can include both the active Stop price and one or more target prices.
When the active Stop and a target are both touched inside the same historical candle, the script uses a conservative rule:
The active Stop receives priority.
This applies to the original Stop Loss and the active Break-Even stop.
Trade-management checks begin on the candle after Entry.
The Entry candle cannot immediately close the new tracked trade.
The conservative priority rule can produce different results from lower-timeframe reconstruction or tick-level execution data.
━━━━━━━━━━━━━━━━━━━━━━
📐 ACTIVE TRADE VISUAL SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
While a tracked trade is active, the script can display:
• Stop Loss or Break-Even line
• Entry line
• TP1 line
• TP2 line
• TP3 line
• Stop Loss or Break-Even label
• Entry label
• TP1 label
• TP2 label
• TP3 label
The lines project to the right by the selected number of bars.
Default:
20 bars
Stop and Entry use solid lines.
Targets use dashed lines.
After TP1 or TP2 is reached:
• the corresponding target label changes to a completed state
• the corresponding line becomes more transparent
After Break-Even activates:
• the Entry line and Entry label disappear
• the active Stop line and label become BE
When the trade closes or is replaced:
• active trade lines are deleted
• active trade labels are deleted
The script does not preserve completed trade lines as permanent historical drawings.
━━━━━━━━━━━━━━━━━━━━━━
🏷️ LABELS, TOOLTIPS, AND TEXT
━━━━━━━━━━━━━━━━━━━━━━
BUY and SELL labels use two lines when strength display is enabled:
direction
strength%
Available Label Size values:
• Tiny
• Small
• Normal
• Large
• Huge
The setting controls:
• BUY
• SELL
• Entry
• Stop Loss
• Break-Even
• TP1
• TP2
• TP3
Phone Mode overrides the selected label size with Tiny.
Visible chart labels use bold and italic formatting.
Signal tooltips can show:
• direction
• strength
• pivot price
Trade-level tooltips can show:
• Entry strength
• risk distance
• Stop Loss mode
• Stop or BE price
• target R value
• target price
• target status
• Break-Even tick offset
Tooltips are informational chart elements.
They do not represent broker orders.
━━━━━━━━━━━━━━━━━━━━━━
📟 COMPACT PREMIUM DASHBOARD
━━━━━━━━━━━━━━━━━━━━━━
The desktop dashboard is divided into four sections:
STATE
• symbol and timeframe
• active signal and strength
• current trade status
• session status
TRADE
• active Stop Loss mode
• Entry and Stop / Break-Even
• TP1 / TP2 / TP3 scale
• live R
PERFORMANCE
• total trades started
• closed trades
• Win Rate
• NET R
• Average R
• TP1 / TP2 / TP3 hit rates
QUALITY
• latest strength
• Trend component
• Volume component
• Wick component
• Confirmation Candle component
• Pivot Distance component
• Trend Bias
• Break-Even mode
• Minimum Strength
Quality components are displayed in a compact format:
T = Trend
V = Volume
W = Wick
C = Candle
P = Pivot Distance
The dashboard can be positioned at:
• Top Right
• Bottom Right
• Top Left
• Bottom Left
The selected input is translated into a PulseWire table position:
string dashboardTablePosition =
dashboardPositionInput == "Top Right" ? position.top_right :
dashboardPositionInput == "Top Left" ? position.top_left :
dashboardPositionInput == "Bottom Left" ? position.bottom_left :
position.bottom_right
if barstate.islast
table.set_position(
statisticsTable,
dashboardTablePosition
)
━━━━━━━━━━━━━━━━━━━━━━
📊 STATISTICS METHODOLOGY
━━━━━━━━━━━━━━━━━━━━━━
The statistics are produced by the script’s internal bar-based tracker.
They are not imported from a broker.
They are not verified account results.
They are not PulseWire Strategy Tester results.
Total Trades Started
Number of accepted signals that opened a tracked trade.
Total Trades Closed
Number of tracked trades closed by:
• Stop Loss
• Break-Even
• TP3
• active-trade replacement
TP1 Hit Rate
TP1 touches divided by Total Trades Started.
TP2 Hit Rate
TP2 touches divided by Total Trades Started.
TP3 Hit Rate
TP3 touches divided by Total Trades Started.
NET R
Sum of all recorded closed-trade R outcomes.
Average R
NET R divided by Total Trades Closed.
Win Rate
Positive-R trades divided by positive-R plus negative-R trades.
Exact 0R Break-Even results are excluded from the Win Rate denominator.
A favorable Break-Even offset can produce a small positive R result and can therefore be classified as a positive-R trade.
Replacement exits use the close of the new signal candle and can contribute partial R.
Statistics depend on:
• loaded chart history
• symbol
• timeframe
• exchange or broker feed
• left and right pivot settings
• Trend Bias
• session setting
• cooldown
• strength threshold
• EMA and volume lengths
• ATR settings
• Stop Loss mode
• target settings
• Break-Even settings
• replacement-signal sequence
Changing any of these inputs can change historical results.
━━━━━━━━━━━━━━━━━━━━━━
🎨 THEME SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes:
• Auto
• Dark Mode
• Light Mode
• Phone Mode
Auto
Detects the chart background and selects the corresponding light or dark visual palette.
Dark Mode
Uses:
• darker green and red signal colors
• dark dashboard surfaces
• white chart-label text
• dark Entry color
• muted dashboard text
• red brand header
Light Mode
Uses:
• brighter green and red signal colors
• light dashboard surfaces
• dark BUY text where required
• adjusted Entry and dashboard colors
• red brand header
Theme selection changes presentation.
It does not change pivot detection, Signal Strength, trade levels, statistics, or alerts.
━━━━━━━━━━━━━━━━━━━━━━
📱 PHONE MODE
━━━━━━━━━━━━━━━━━━━━━━
Phone Mode is designed for smaller chart areas.
It uses:
• Tiny signal labels
• Tiny active-trade labels
• one-pixel trade-level lines
• dark visual palette
• compact dashboard text
• reduced dashboard rows
The Phone Mode dashboard displays:
• Signal and Strength
• Status
• Win Rate and NET R
• Session
The compact layout intentionally removes most desktop details.
Phone Mode changes presentation only.
It does not change calculations.
━━━━━━━━━━━━━━━━━━━━━━
🚨 ALERT SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes static PulseWire alert conditions for:
• Confirmed BUY
• Confirmed SELL
• Stop Loss Hit
• Break-Even Activated
• Break-Even Hit
• TP1 Hit
• TP2 Hit
• TP3 Hit
Static BUY and SELL messages can include:
• exchange
• ticker
• timeframe
• Signal Strength
• Entry
• Stop
• TP1
• TP2
• TP3
The script also includes dynamic alert() events for:
• BUY signal
• SELL signal
• Stop Loss hit
• Break-Even activation
• Break-Even hit
• TP1 hit
• TP2 hit
• TP3 hit
Dynamic signal messages can include:
• trade_w_samet identifier
• event type
• direction
• symbol
• timeframe
• Signal Strength
• Entry
• Stop
• TP1
• TP2
• TP3
• Stop Loss Mode
• Break-Even Mode
• Trading Session
• session OPEN / CLOSED state
Dynamic trade-management messages preserve the active trade’s stored values before the trade state is reset.
Alert events use once-per-bar-close frequency.
A dynamic signal message is assembled from the stored trade values:
string buyEntryAlertMessage =
"trade_w_samet | Pivot Sniper Method" +
" Event: BUY SIGNAL" +
" Direction: BUY" +
" Symbol: " + syminfo.tickerid +
" Timeframe: " + timeframe.period +
" Strength: " + str.tostring(buySignalStrength) + "%" +
" Entry: " + str.tostring(activeEntryPrice, format.mintick) +
" SL: " + str.tostring(activeStopPrice, format.mintick) +
" TP1: " + str.tostring(activeTP1Price, format.mintick) +
" TP2: " + str.tostring(activeTP2Price, format.mintick) +
" TP3: " + str.tostring(activeTP3Price, format.mintick)
alert(
message=buyEntryAlertMessage,
freq=alert.freq_once_per_bar_close
)
The complete live message also includes Stop Loss Mode, Break-Even Mode, and session context.
Alerts are monitoring tools.
They do not execute or modify broker orders.
━━━━━━━━━━━━━━━━━━━━━━
🔔 HOW TO USE ALERTS
━━━━━━━━━━━━━━━━━━━━━━
For a specific static event:
1. Add Pivot Sniper Method to the chart.
2. Open PulseWire’s Create Alert window.
3. Select the indicator as the condition.
4. Select the required BUY, SELL, Stop, Break-Even, TP1, TP2, or TP3 event.
5. Select the notification method.
6. Test the alert before relying on it.
For one combined dynamic workflow:
1. Add the indicator to the chart.
2. Open Create Alert.
3. Select Pivot Sniper Method .
4. Select Any alert() function call.
5. Configure the delivery method.
6. Test signal and trade-management messages.
PulseWire saves a snapshot of the script, its inputs, and chart context when an alert is created.
After materially changing the script, symbol, timeframe, or inputs, delete and recreate the alert so it uses the intended configuration.
━━━━━━━━━━━━━━━━━━━━━━
🧪 PRACTICAL WORKFLOW
━━━━━━━━━━━━━━━━━━━━━━
A practical review process:
1. Add Pivot Sniper Method to a standard candlestick chart.
2. Select Auto, Dark, Light, or Phone Mode.
3. Start with symmetrical pivot settings.
4. Observe how right-side bars affect confirmation delay.
5. Select Both Trend Bias when studying raw signal behavior.
6. Select Bullish or Bearish when reviewing one direction only.
7. Begin with All Sessions when studying general behavior.
8. Test London, New York, or Custom session filtering.
9. Begin with the default Minimum Signal Strength.
10. Compare signal frequency at higher and lower thresholds.
11. Review the strength percentage below each BUY or SELL label.
12. Use the tooltip to inspect the confirmed pivot price.
13. Compare the five quality components in the dashboard.
14. Select the preferred Stop Loss Mode.
15. Verify that the structural stop is logically positioned.
16. Review the ATR fallback behavior.
17. Set TP1, TP2, and TP3 in increasing order.
18. Select the Break-Even rule.
19. Review when the Entry label disappears and BE replaces it.
20. Observe how new eligible signals replace an active tracked trade.
21. Review Live R and historical NET R.
22. Review failed setups as well as successful setups.
23. Create and test alerts.
24. Define personal position size independently.
25. Account for spread, commission, liquidity, news, and execution conditions.
The indicator is designed for structured study and monitoring.
It should not be treated as an automatic decision-maker.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ SETTINGS REFERENCE
━━━━━━━━━━━━━━━━━━━━━━
📈 Trend Bias
Trend Bias
• Bullish
• Bearish
• Both
━━━━━━━━━━━━━━━━━━━━━━
⚙️ Pivot Settings
Pivot High Left Bars
Default:
10
Pivot High Right Bars
Default:
10
Pivot Low Left Bars
Default:
10
Pivot Low Right Bars
Default:
10
━━━━━━━━━━━━━━━━━━━━━━
🚨 Signal Settings
Show BUY / SELL Signals
Shows or hides signal labels.
Signal Cooldown Bars
Default:
0
━━━━━━━━━━━━━━━━━━━━━━
🕒 Time Filter
Trading Session
• All Sessions
• London
• New York
• London + New York
• Custom
Custom Session
Default:
08:00–17:00
Custom Session Time Zone
• Exchange
• UTC
• Europe/London
• America/New_York
• Europe/Istanbul
• Asia/Tokyo
━━━━━━━━━━━━━━━━━━━━━━
💪 Signal Strength
Enable Signal Strength Filter
Default:
On
Minimum Signal Strength
Default:
55
Show Strength on Signal
Default:
On
Strength Trend Length
Default:
50
Strength Volume Length
Default:
20
━━━━━━━━━━━━━━━━━━━━━━
📦 Trade Levels
Show Active Trade Levels
Default:
On
Stop Loss Mode
• ATR
• Pivot Level
• Pivot + ATR Buffer
• Signal Candle
ATR Length
Default:
14
Stop Loss ATR Multiplier
Default:
2.0
Pivot ATR Buffer
Default:
0.25
TP1 Risk / Reward
Default:
1.0R
TP2 Risk / Reward
Default:
2.0R
TP3 Risk / Reward
Default:
3.0R
Level Projection Bars
Default:
20
━━━━━━━━━━━━━━━━━━━━━━
🟡 Break-Even
Break-Even Mode
• Off
• After TP1
• After TP2
Default:
After TP1
Break-Even Offset Ticks
Default:
0
━━━━━━━━━━━━━━━━━━━━━━
📊 Statistics Dashboard
Show Statistics Dashboard
Default:
On
Dashboard Position
• Top Right
• Bottom Right
• Top Left
• Bottom Left
━━━━━━━━━━━━━━━━━━━━━━
🎨 Visual Settings
Theme Mode
• Auto
• Dark Mode
• Light Mode
• Phone Mode
Label Size
• Tiny
• Small
• Normal
• Large
• Huge
Phone Mode always uses Tiny.
━━━━━━━━━━━━━━━━━━━━━━
🔔 Alert Settings
Enable BUY Alerts
Default:
On
Enable SELL Alerts
Default:
On
Enable Dynamic Alerts
Default:
On
All public input values are hidden from PulseWire’s status line to reduce chart-header clutter.
━━━━━━━━━━━━━━━━━━━━━━
🧠 WHAT MAKES THIS SCRIPT ORIGINAL
━━━━━━━━━━━━━━━━━━━━━━
Pivots, ATR, EMA, volume comparison, session filters, risk/reward levels, Break-Even, alerts, and performance statistics are established technical-analysis concepts.
These concepts are not unique by themselves.
The originality of Pivot Sniper Method lies in the coordinated implementation applied to them:
confirmed high and low pivots
→ same-bar directional-conflict rejection
→ Bullish / Bearish / Both permission
→ session filtering
→ cooldown
→ five-part 0–100 quality model
→ minimum-quality acceptance
→ compact two-line BUY / SELL labels
→ confirmation-close Entry
→ four selectable Stop Loss models
→ ATR structural-stop validation fallback
→ independently adjustable TP1 / TP2 / TP3
→ target-state visual updates
→ TP1- or TP2-based Break-Even
→ Entry-to-BE visual replacement
→ active-trade replacement at current close
→ internal partial-R accounting
→ desktop and Phone dashboards
→ theme-aware colors
→ dashboard-corner selection
→ detailed static and dynamic alerts
Distinctive implementation features include:
• using five quality dimensions inside one pivot-reversal workflow
• separating pivot confirmation from Entry timing
• using the original pivot candle for wick quality
• using the later confirmation candle for candle quality and Entry
• applying session control only to new entries
• supporting four Stop Loss construction methods
• validating structural stops and falling back to ATR when required
• removing the Entry visual after Break-Even replaces it
• tracking replacement exits in R
• showing latest quality components in a compact dashboard
• supporting both individual events and one combined dynamic-alert workflow
The script is not a collection of unrelated indicators.
Every component supports the same objective: evaluating and managing a confirmed pivot-reversal setup under explicit, reviewable rules.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ IMPORTANT PRACTICAL NOTES
━━━━━━━━━━━━━━━━━━━━━━
Signal frequency depends on:
• symbol
• timeframe
• data provider
• pivot left and right settings
• Trend Bias
• selected session
• cooldown
• minimum strength
• EMA length
• volume length
• ATR availability
• historical data availability
Higher right-side pivot values increase confirmation delay.
Higher strength thresholds reduce accepted signals.
Session filtering can remove otherwise valid setups.
The strength score is not a probability forecast.
The Trend component is part of the score, not a separate hard trend filter.
The script replaces an active tracked trade when a new eligible signal appears.
The script does not retain completed trade lines historically.
Dashboard statistics use loaded chart history only.
Different exchanges, brokers, and data feeds can produce different:
• highs
• lows
• closes
• pivots
• wick measurements
• volume values
• ATR values
• EMA values
• signals
• stop levels
• target levels
• replacement exits
• historical statistics
Changing available history can change the first eligible setup and later active-trade sequencing.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ LIMITATIONS AND SHORTCOMINGS
━━━━━━━━━━━━━━━━━━━━━━
This script has important limitations.
It does not guarantee profitable trades.
It does not predict future price movement with certainty.
It does not execute orders.
It does not place broker Stop Loss orders.
It does not place broker Take Profit orders.
It does not calculate position size.
It does not calculate account risk.
It does not include spread.
It does not include commission.
It does not include slippage.
It does not include latency.
It does not include swap or financing.
It does not include taxes.
It does not model partial fills.
It does not model order rejection.
It does not model contract specifications.
It does not model tick-by-tick execution.
It uses historical OHLC bars.
It cannot always determine whether Stop or target occurred first inside one candle.
It resolves same-candle ambiguity in favor of the active Stop.
It begins trade-management checks on the candle after Entry.
It requires right-side pivot confirmation.
It cannot identify a confirmed pivot on the original pivot candle.
It can react with delay when larger right-side values are used.
It rejects simultaneous high and low pivot confirmation.
It can reject setups through bias, session, strength, or cooldown rules.
It replaces an active tracked trade when a new eligible signal appears.
A replacement exit can close a trade before its mapped Stop or TP3.
Its Signal Strength is an internal score, not a probability.
Its volume component depends on available volume data.
Its dashboard is not Strategy Tester.
Its statistics are not audited.
Its Win Rate excludes exact 0R Break-Even results.
A positive Break-Even offset can classify a BE hit as positive R.
Its target hit rates use total trades started.
Its statistics depend on loaded chart history.
Changing settings recalculates historical behavior.
Alerts depend on PulseWire and user configuration.
Alerts do not guarantee broker execution.
━━━━━━━━━━━━━━━━━━━━━━
👤 WHO THIS SCRIPT MAY BE USEFUL FOR
━━━━━━━━━━━━━━━━━━━━━━
This script may be useful for traders who:
• understand pivot confirmation
• want BUY and SELL signals based on confirmed price pivots
• prefer a quality score instead of equal treatment for every pivot
• want separate Bullish and Bearish direction controls
• want London, New York, or Custom session filtering
• want selectable ATR or structural stops
• want independently adjustable R targets
• want TP1- or TP2-based Break-Even
• want active trade levels on the chart
• want compact tooltips
• want loaded-history R statistics
• want a compact desktop dashboard
• want a reduced Phone Mode
• want detailed PulseWire alerts
• understand that historical chart results are not verified execution
It may be less suitable for users who:
• want signals on the original unconfirmed pivot candle
• want no pivot delay
• want tick-level backtesting
• want multiple simultaneous tracked trades
• want new signals ignored while a trade is active
• want historical completed-trade lines preserved
• want automatic broker execution
• want position sizing
• want commission and slippage modeling
• want guaranteed reversal signals
• interpret Signal Strength as win probability
• expect historical Win Rate to continue unchanged
━━━━━━━━━━━━━━━━━━━━━━
🧭 BEST-PRACTICE SUGGESTIONS
━━━━━━━━━━━━━━━━━━━━━━
For studying pivot sensitivity:
• begin with equal high and low pivot settings
• compare smaller and larger left / right values
• remember that right-side values directly affect delay
For studying raw signal behavior:
• use Both Trend Bias
• use All Sessions
• use a moderate minimum strength
• review every accepted BUY and SELL
For directional study:
• use Bullish or Bearish
• compare results separately
• do not assume one direction will remain superior
For session-based review:
• compare All Sessions with London or New York
• use the exchange’s actual liquidity characteristics
• remember that active trades remain managed outside the session
For Signal Strength:
• begin with 55
• compare frequency at 45, 55, and 65
• review the five components
• do not interpret the percentage as guaranteed probability
For risk mapping:
• begin with ATR 14 and 2.0 multiplier
• compare ATR with Pivot Level
• compare Pivot Level with Pivot + ATR Buffer
• maintain logical TP1 < TP2 < TP3 values
For Break-Even:
• compare Off with After TP1
• test After TP2 for wider trade development
• keep the tick offset realistic for the instrument
For chart clarity:
• use Auto for general use
• use Dark or Light when manual control is preferred
• use Phone Mode on smaller screens
• move the dashboard away from important price action
• adjust label size according to chart density
Always:
• wait for confirmed signals
• review broader market structure
• review liquidity and volatility
• review news risk
• define personal account risk
• calculate position size independently
• test the exact symbol, timeframe, and data feed
• inspect failed trades as well as successful trades
• recreate alerts after important configuration changes
━━━━━━━━━━━━━━━━━━━━━━
🔓 PUBLICATION NOTE
━━━━━━━━━━━━━━━━━━━━━━
Pivot Sniper Method is published as an educational pivot-confirmation, signal-quality, session-filtering, risk-mapping, Break-Even, statistics, and alert tool.
The purpose of this description is to explain:
• how pivots are confirmed
• why signals appear after the original pivot
• how BUY and SELL candidates are formed
• how simultaneous pivot conflicts are rejected
• how Trend Bias affects eligibility
• how session filtering affects new entries
• how cooldown affects frequency
• how the five Signal Strength components work
• why Signal Strength is not a probability
• how Entry is defined
• how each Stop Loss Mode works
• how invalid structural stops fall back to ATR
• how TP1, TP2, and TP3 are calculated
• how Break-Even activates
• why Entry disappears after BE becomes active
• how same-candle Stop / target ambiguity is handled
• how active trades are replaced by new eligible signals
• how internal R statistics are calculated
• what the dashboard displays
• how Phone Mode differs
• what alerts include
• what the script does not simulate
• why historical results can change
The script is designed to support structured review.
It does not promise profitable results.
It does not remove market risk.
It does not replace independent analysis.
It does not replace personal risk management.
━━━━━━━━━━━━━━━━━━━━━━
🕒 REPAINTING, BACKPLOTTING, AND TIMING DISCLOSURE
━━━━━━━━━━━━━━━━━━━━━━
Pivot Sniper Method uses confirmed price pivots.
Pivot confirmation requires future candles relative to the original pivot location.
The number of required right-side candles is controlled independently for pivot highs and pivot lows.
The script does not know that a pivot exists on the original pivot candle.
After the required right-side candles complete:
• the pivot becomes confirmed
• the candidate is evaluated
• Signal Strength is calculated
• filters are applied
• the BUY or SELL label can appear on the confirmation candle
• the tracked Entry can open at the confirmation-candle close
The BUY or SELL trade label is not plotted back on the original pivot candle.
The Entry is not backdated.
Signals require confirmed chart bars.
This reduces unfinished current-bar variation.
It does not remove:
• pivot confirmation delay
• differences between historical OHLC and tick sequence
• data-feed differences
• changes caused by settings
• changes caused by loaded history
• market risk
Historical results can change when:
• pivot settings change
• Trend Bias changes
• session settings change
• cooldown changes
• strength settings change
• ATR settings change
• Stop Loss Mode changes
• target settings change
• Break-Even settings change
• symbol changes
• timeframe changes
• exchange or broker feed changes
• available chart history changes
Users should interpret the original pivot price as historical structure and the later BUY / SELL candle as the actual confirmed signal timing.
━━━━━━━━━━━━━━━━━━━━━━
🛡️ DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━━
Pivot Sniper Method is provided for educational and informational purposes only.
It does not constitute financial, investment, trading, legal, accounting, or tax advice.
No indicator can guarantee future results.
Markets are uncertain.
Price structure changes.
Volatility changes.
Liquidity changes.
Volume behavior changes.
Session behavior changes.
Historical chart behavior does not ensure future performance.
Every user is responsible for their own:
• analysis
• validation
• symbol selection
• timeframe selection
• pivot settings
• directional bias
• session selection
• quality threshold
• Stop Loss selection
• target planning
• Break-Even selection
• position sizing
• risk management
• alert configuration
• trading decisions
• broker execution
• legal obligations
• tax obligations
The pivots, BUY labels, SELL labels, Signal Strength values, Entry levels, Stop Loss levels, Break-Even levels, TP1 levels, TP2 levels, TP3 levels, active lines, labels, tooltips, dashboard values, Win Rate, NET R, Average R, target hit rates, and alerts are visual analysis tools only.
A confirmed pivot is not a guaranteed reversal.
A high Signal Strength value is not a guaranteed winning trade.
A TP label is not proof of an actual broker fill.
A Stop Loss event is not proof of an actual broker fill.
The dashboard is not verified account performance.
The statistics are not audited.
The script does not include spread, commission, slippage, latency, financing, taxes, partial fills, order rejection, position sizing, account equity, or broker-specific execution.
Use the script as a structured pivot-reversal review, trade-mapping, and monitoring framework—not as a promise of profitability or a substitute for independent judgment.
Indicator
Liquidity Sweep Hunter [BigBeluga]🔵 OVERVIEW
The Liquidity Sweep Hunter is a smart, volume-aware charting tool that automatically detects major support and resistance levels.
Unlike basic horizontal line indicators that just draw lines on every swing high or low, this script filters levels based on volume strength . It identifies the "heavy" levels where big money has clearly participated, projects them forward as active boundaries, and alerts you the exact moment price "sweeps" through them.
🔵 FEATURES
The system works by tracking the relationship between price pivots and real-time volume:
1 — Volume-Weighted Level Detection
Smart Pivot Filtering: The engine identifies price pivots ( Length ) but only confirms a level if the volume at that pivot exceeds your defined Filter threshold. This ignores "weak" pivots and keeps your focus only on high-conviction zones.
Dynamic Intensity Engine: The indicator automatically changes the look of the lines based on volume. Levels created with higher volume activity get thicker lines ( Max Line Width ) and higher opacity, making them visually stand out more on your chart.
2 — Automated Liquidity Sweep & Break Logic
Sweep Alerts (✔): When the price briefly dips below a support level (or spikes above a resistance level) and then closes back inside, the indicator plots a checkmark (✔) to identify the "liquidity sweep."
Smart Self-Cleaning: If the price candles break directly through a support or resistance line, the indicator detects the structural breach, changes the line to a dotted style, and removes it from your active list. This keeps your chart free of outdated, broken levels.
🔵 HOW TO USE
This tool is designed to help you trade based on where market participants have placed their stops and orders:
Identify High-Volume Anchors: Use the thick, bold lines to spot the most important support and resistance levels on your timeframe. These are the zones where the script detected significant institutional interest.
Look for Sweep Confirmations: Watch for the (✔) checkmarks after a line is tagged. A liquidity sweep often signals that the market is grabbing "stop-loss" liquidity before reversing in the opposite direction.
Manage Trade Exit Points: Use the lines as your target zones. Since the script automatically turns lines into "dotted" style when they are broken, you have a visual trigger to cut a position if a key structural level fails.
🔵 NOTES
Why this implementation is unique:
It combines two powerful concepts—volume analysis and pivot structure—into a single, lightweight tool that doesn't overwhelm your chart.
The "Dynamic Intensity" settings allow you to see at a glance which levels are mathematically the most significant based on the volume data behind them.
It is a "self-managing" system; by automatically deleting broken levels, it ensures your screen stays clear for your actual trade execution.
Indicator
Signature Pivots: Conviction & DivergenceSignature Pivots: Conviction & Divergence
Every chart prints dozens of swings and most of them are noise. This
tool has one job: help you pick the pivots worth anchoring analysis
on. It finds confirmed swing highs and lows, filters out the minor
wiggles, stamps each survivor with a time signature, grades it by
volume conviction, and warns when a new extreme was made on hollow
volume. It draws and grades structure - it never tells you to buy or
sell.
How pivots are found
A swing high is a bar whose high is the highest of N bars on either
side (N is the "Pivot strength" input; swing lows mirror it). A pivot
can therefore only confirm N bars after the fact - that is detection
lag, not repainting, and once a marker prints it stays. On top of that
sits a size filter: a new pivot must be at least "Min swing size" ATRs
away from the previous kept pivot, so a daily chart shows the swings
that matter instead of every five-bar fractal. Set it to 0 if you want
them all.
The signature
This is the unusual part. Each pivot's UTC timestamp is converted,
through sidereal time at the market center you choose, into the degree
of the zodiac rising on the eastern horizon at that exact moment - the
Ascendant. That gives a number from 0 to 360 which sweeps the full
circle once every 23 hours 56 minutes. It depends only on the clock
and the location, never on price, so the same moment always maps to
the same number on every chart and timeframe. In plain terms, it tags
each pivot with where in the daily rotation cycle it formed. The old
observation being tested here is that turns tend to recur at the same
phase of that cycle.
Matching
The last 24 pivots (a setting) are kept in memory. Each new pivot's
signature is compared against stored pivots of the same kind only -
highs against earlier highs, lows against earlier lows - measured
correctly around the 360 ring, so 359 and 1 are two degrees apart, not
358. If the nearest same-kind signature sits within the match
tolerance (1 degree by default), the pivot is flagged: its label
highlights with a star, a dotted line links it back to the pivot it
repeats, and an alert fires. A match is a candidate worth studying,
not proof of anything - the defaults are deliberately strict so that a
star stays rare.
Conviction and divergence
Volume flow is measured with on-balance volume: each bar's volume
added on an up close, subtracted on a down close. A pivot's conviction
is simply whether OBV stood above or below its own moving average at
the pivot bar - was volume flow supporting the move that made the
swing, or fighting it. Divergence looks at consecutive extremes: a new
swing high above the previous one, with OBV lower than it was at the
previous high, prints a bearish divergence mark (price stretched,
volume flow did not follow); new lows mirror that for bullish
divergence.
Why these three live in one tool: they are three questions about the
same object. Did this pivot form at a recurring phase of the rotation
cycle? Did volume back the swing? Was the extreme hollow? Read
together on one label, they turn a plain zigzag into a graded list of
anchor candidates.
Reading the chart
H and L mark confirmed swing highs and lows. The caret after the
letter is conviction at that pivot (^ above the OBV average, v below).
The number is the signature in degrees. A star and highlighted color
mean a signature match, with a dotted line back to the earlier pivot
it repeats. "Div" marks print at divergent extremes. The zigzag
connects consecutive pivots so the structure stays visible. The HUD
shows the live conviction state, the last signature, the last
high-value pivot, and running pivot and match counts - event counts,
not performance figures.
Settings worth knowing
Pivot strength and Min swing size control how selective the swing
detection is. Match tolerance and Match memory control how strict a
"repeat" must be - loosening either will flag more pivots, and past a
point most of those extra stars are coincidence, which is why the
defaults are tight. The Market Center sets the geographic reference
for the signature; keep one consistent choice across your charts so
signatures stay comparable (for 24/7 crypto any consistent center
works). "Only show high-value pivots" hides everything except matches
if you want the quietest possible chart.
Using it
It runs on any timeframe, with one honest caveat: the matching layer
is most alive on intraday charts. On daily bars every pivot stamps at
the same time of day, so signatures drift about a degree per day and
repeats are naturally rare and far apart - on a daily chart this tool
is mainly a swing, conviction and divergence grader. Use it as a
filter, not a trigger: when you need a swing to anchor other work on,
prefer the starred pivots, and among those prefer the ones whose
conviction agreed with the swing and that carry no divergence warning.
Alerts are provided for a high-value pivot, bullish and bearish
divergence, and each new confirmed swing.
What is original here
Swing detection, OBV and divergence are standard public techniques.
The original work is the signature layer - the rising-degree
computation runs entirely on the chart from the timestamp, with no
external data - together with the ring-correct same-kind matching and
its pivot-to-pivot links, and the fusion of the three readings into a
single graded label. Written from scratch in Pine v6; no open-source
code was reused.
Honest notes
Pivots confirm late by construction. Some matches will always be
coincidence; the tolerance and memory settings exist to keep that in
check, and a star is an invitation to look closer, nothing more.
Different market centers give different signature numbers, so keep
yours consistent. Educational study tool; the HUD counts events, not
wins; no performance claims; not financial advice. Indicator
Top & Bottom Finder XL# Top & Bottom Finder XL
## User's Guide
---
# Overview
**Top & Bottom Finder XL** is a market exhaustion indicator.
Its purpose is **not** to predict every swing high and swing low.
Instead, it attempts to identify **high-probability exhaustion points** where price has become statistically extended and has a greater chance of reversing.
Unlike traditional pivot indicators, this indicator combines several independent filters:
* Structural pivots
* Momentum (RSI)
* Trend extension
* Volume
* Range expansion
Only when the selected filters agree does the indicator produce a **Confirmed Top** or **Confirmed Bottom**.
---
# How the Indicator Works
Every signal goes through the following process:
### Step 1 — Find a Pivot
The indicator first looks for a legitimate swing high or swing low using PulseWire's pivot algorithm.
A pivot is not confirmed until the required number of right bars has completed.
Example:
Left = 100
Right = 5
means:
* current high must be higher than the previous 100 bars
* and remain the highest point for the next 5 bars
Only then is it officially a pivot.
---
### Step 2 — Apply RSI Filter (Optional)
Purpose:
Avoid taking pivots that occur without momentum extremes.
A top requires
RSI ≥ Top Threshold
A bottom requires
RSI ≤ Bottom Threshold
Default:
Top = 65
Bottom = 35
Disabling this filter means RSI is ignored completely.
---
### Step 3 — Apply Trend Extension Filter (Optional)
Purpose:
Avoid taking pivots that are too close to the trend.
The indicator measures:
Distance from EMA
using ATR.
Formula:
Distance =
Price − EMA
divided by ATR
Example
EMA = 100
ATR = 2
Price = 110
Distance =
10 ÷ 2
= 5 ATR
If Minimum ATR Extension = 5
the signal passes.
Otherwise it is rejected.
This filter is extremely effective at removing mediocre signals.
---
### Step 4 — Confirmation Filter
This determines whether the pivot occurred with unusually strong participation.
There are four modes.
## Off
No confirmation required.
Every pivot that passes the other filters becomes confirmed.
Produces the most signals.
---
## Volume Only
The pivot bar must have
Volume >
Average Volume × Multiplier
Default
50-bar average
Multiplier = 2
---
## Range Only
The pivot candle must have
Range >
Average Range × Multiplier
This looks for unusually large candles.
---
## Volume + Range
The strictest mode.
Requires BOTH:
* high volume
* large candle
Produces the fewest signals.
Usually the highest quality.
---
# Timeframe Settings
## Calculation Timeframe
Allows calculations on another timeframe.
Example
Chart = 15 minute
Calculation = 1 hour
Signals are calculated from hourly data but displayed on the 15-minute chart.
Leave blank to use the current chart timeframe.
---
# Pivot Settings
## Pivot Bars Left
Controls how significant the pivot must be.
Small values
More signals
Less significant
Large values
Fewer signals
More important turning points
Default
100
---
## Pivot Bars Right
Controls confirmation delay.
Larger values
Later signals
Higher confidence
Smaller values
Earlier signals
More false signals
Default
5
---
# Signal Filters
## Use RSI Filter
Enable or disable RSI completely.
---
## RSI Length
Default
14
Controls how RSI is calculated.
---
## Top RSI Threshold
Minimum RSI required for tops.
Default
65
Higher values
Fewer signals
---
## Bottom RSI Threshold
Maximum RSI allowed for bottoms.
Default
35
Lower values
Fewer signals
---
## Use Trend EMA Filter
Turns EMA distance filtering on or off.
---
## Trend EMA Length
Default
200
Long-term trend reference.
---
## ATR Length
Default
14
Used to normalize volatility.
---
## Minimum ATR Extension
Default
5 ATR
Controls how far price must stretch away from the EMA.
Higher values
Only extreme exhaustion
Lower values
More frequent signals
---
## Confirmation Mode
Options:
* Off
* Volume Only
* Range Only
* Volume + Range
Determines final confirmation.
---
## Volume / Range Average Length
Default
50
Average period used for volume and range comparisons.
---
## Volume Multiplier
Default
2
Required increase above average volume.
Example
Average volume = 100,000
Multiplier = 2
Required volume
200,000
---
## Range Expansion Multiplier
Default
0.5
Required increase above average candle range.
Higher values
Require larger candles.
---
# Display Settings
## Show Trend EMA
Displays the EMA used for trend extension.
Useful for visualizing how stretched price became.
---
## Show Watch Signals
Displays every confirmed pivot before filtering.
Watch signals represent:
"Potential reversal areas."
Confirmed signals represent:
"Filtered, higher-probability reversal areas."
---
## Color Settings
Customize:
* Watch Tops
* Watch Bottoms
* Confirmed Tops
* Confirmed Bottoms
* EMA
---
# Label Controls
These options determine what information appears inside Confirmed labels.
---
## Show Price
Displays pivot price.
Example
Price
145.32
---
## Show Pivot Settings
Displays
Left / Right
Example
100 / 5
Useful when comparing settings.
---
## Show RSI
Displays RSI at the pivot.
Example
RSI
72.5
---
## Show Volume
Displays pivot volume.
Useful when Volume confirmation is enabled.
---
## Show ATR
Displays ATR at the pivot.
Important:
This is **not** the distance from the EMA.
It simply displays the market's volatility (ATR) at the time the pivot formed.
Higher ATR means a more volatile market.
Lower ATR means a quieter market.
---
## Show EMA Distance
Displays
Distance from EMA
measured in ATRs.
Example
EMA Dist
5.82 ATR
This is arguably the most useful statistic on the label because it quantifies how extended price was when the reversal occurred.
---
## Show Confirmation Type
Displays how the confirmation filter was satisfied.
Possible values:
* Volume
* Range
* Volume + Range
* None
---
# Alerts
The indicator includes four alerts:
### Confirmed Top Found
Generated when a filtered top is confirmed.
---
### Confirmed Bottom Found
Generated when a filtered bottom is confirmed.
---
### Top Watch
Generated for every structural pivot high before filtering.
---
### Bottom Watch
Generated for every structural pivot low before filtering.
---
# Understanding Signal Timing
This is important.
The indicator **does not repaint**, but it is intentionally delayed by the **Pivot Bars Right** setting.
Example:
Right Bars = 5
A top occurring today will only be confirmed after five additional bars have closed without a higher high.
This is necessary because the indicator waits for confirmation that the pivot is truly established.
---
# Suggested Starting Settings
## Swing Trading (Daily)
* Left Bars: 100
* Right Bars: 5
* RSI: On
* EMA Filter: On
* Minimum ATR Extension: 5
* Confirmation: Volume Only
---
## Position Trading (Weekly)
* Left Bars: 150–250
* Right Bars: 5–10
* ATR Extension: 6–8
* Confirmation: Volume + Range
---
## Short-Term Trading (15–60 Minute)
* Left Bars: 30–60
* Right Bars: 3–5
* ATR Extension: 3–4
* Confirmation: Volume Only
---
# Strengths
* Adapts to market volatility using ATR.
* Filters out many insignificant pivots.
* Uses multiple independent confirmation methods.
* Supports higher-timeframe calculations on lower-timeframe charts.
* Does not repaint after pivot confirmation.
* Highly configurable for different trading styles.
---
# Current Limitations
* Signals are intentionally delayed by the selected Right Bars value.
* The indicator identifies **exhaustion points**, not trend direction.
* Strong trends can continue after a confirmed top or bottom, especially during momentum-driven markets.
* Volume confirmation may be less reliable for markets where reported volume is limited or synthetic (such as many forex CFDs).
---
# Best Use Practices
The indicator performs best when used to identify **areas of elevated reversal probability**, not as a standalone buy or sell trigger. Higher-quality setups occur when a confirmed signal aligns with higher-timeframe support or resistance, trendline breaks, divergence, or other independent forms of technical confirmation. Treat confirmed tops and bottoms as locations to focus attention rather than automatic entry points.
Indicator
Pivot Premium Suite Nicolau EditionPivotPro Nicolau — Pivot Points + SuperTrend + EMA with the “Displacement” option
A professional all-in-one indicator combining three powerful technical
analysis tools into a single, clean, and highly configurable solution.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 1. ADVANCED PIVOT POINTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Calculates and displays Pivot Points with full customization:
- Two calculation methods: Traditional and Fibonacci
- Configurable timeframe: Daily, Weekly, Monthly or Yearly
- Choose how many periods to display (current + previous)
- Labels positioned on Left or Right side of each line
- Individual color control for each level (P, R1, R2, R3, S1, S2, S3)
- Labels follow the line edge automatically — no overlap
- Alerts for price crossing any pivot level
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📈 2. PIVOT POINT SUPERTREND
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
A unique SuperTrend implementation that uses Pivot Highs and Lows
as its center line instead of the traditional midpoint — making it
more reactive to actual market structure:
- ATR-based dynamic bands calculated from pivot-weighted center
- Buy/Sell signals rendered as plotshape (independent from labels)
- Optional Support/Resistance circles from pivot points
- Optional center line display
- Alerts for trend changes and Buy/Sell signals
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📉 3. EMA SUITE WITH SHIFT
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Three fully configurable Exponential Moving Averages with an
exclusive displacement feature:
- EMA 9, EMA 21, EMA 200 — all periods configurable
- Individual color for each EMA
- Each EMA has its own shift toggle and period input
- Positive shift = forward displacement (future projection)
- Negative shift = backward displacement (historical alignment)
- Visual crossover marker between EMA 9 and EMA 21
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚙️ KEY FEATURES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- Pivot numbers stay visible even when chart objects are hidden
- Buy/Sell labels are independent from Pivot labels
- All colors individually configurable
- Clean, non-overlapping label system
- Full alert support for all signals
Designed for traders who need precision, clarity and full control
over their chart without visual clutter.
Indicator
Sweep and Cluster [JOAT]SWEEP AND CLUSTER
A two-stage liquidity-sweep engine. Most public "sweep" indicators print a label on every wick that pokes past a recent high or low — which is mostly noise. Sweep and Cluster requires two separate events to register a tradeable signal: first a strict 5-condition sweep, then a confirming cluster of price action in the rejection direction. The label that actually appears on the chart is the rare intersection — the moments where institutional stop-running is followed by genuine commitment in the opposite direction.
Stage 1 — Strict 5-condition sweep detection
A sweep is registered only when all of these are true on the same bar:
Real pivot reference — the swept level is an actual minor pivot (ta.pivothigh / ta.pivotlow) from the rolling cache, not a rolling max/min. A scan-depth input controls how far back to look; a minimum-age gate prevents self-reference.
Wick magnitude — the wick that exceeds the pivot must be at least Wick ATR Multiplier × ATR(14) (default 0.8 ATR). The KB-published strict threshold.
Wick dominance — wick length must be at least Wick/Range Ratio of the candle's total range (default 35%). The wick must dominate the bar's shape, not be a side-effect of a large body.
Closing direction — close must be back inside the swept level. A clean wick that closed beyond the pivot is a breakout, not a sweep — and is filtered out by construction.
Cooldown — at least N bars (default 8) since the last same-side sweep. Prevents one stop-run from being counted as multiple sweeps when the wick prints over several bars.
If all five conditions are met a pending marker is placed (optional). Pending markers represent "a sweep happened" but not yet "the sweep was meaningful" — until the cluster confirms, the sweep is not actionable.
Stage 2 — Cluster confirmation
After a sweep fires, the next N bars (cluster window, default 5) are monitored for confirming follow-through. The cluster confirms only when:
At least M bars (default 1) close against the swept direction inside the window.
Average body/range across the qualifying cluster bars exceeds the Min Body Ratio (default 0.25) — the rejection candles must be impulsive, not micro-bodies.
Cumulative volume across the cluster window is at least Volume Multiplier × Average Volume (default 0.8×). Without volume the cluster is not commitment.
When all three confirm, the script fires the SAC (Sweep And Cluster) label — the actionable signal. A cluster strength badge (body sum / ATR) is rendered next to the label so you can rank one SAC vs another at a glance.
A failed sweep marker (toggleable, off by default) tracks sweeps that expired without confirming — useful for auditing the false-positive rate visually and for choosing thresholds.
Visual system
Sweep wick highlight — a thin coloured line at the swept reference price, extended right by a configurable number of bars. Makes the rejection unmistakable.
Reference level triangle — small glyph at the actual pivot level that was swept.
Cluster candle override — when SAC fires, the confirming cluster candles are repainted in the active-side theme colour via plotcandle so the move stands out from background.
Optional background tint — fading directional bgcolor for a few bars after a confirmed SAC.
Optional bar paint by active bias — every bar painted bull/bear based on the most recent SAC. Off by default to preserve chart neutrality.
A locked Quantum palette (cyan-quantum bull / pink-quantum bear on a deep void) gives the chart a distinctive sweep-and-reverse identity.
Dashboard + rolling statistics
A monospaced table, positionable to any of nine corners, with vertical row-fade for premium feel. Surfaces:
Total sweeps and total SACs since the last session/day/week reset (configurable reset frame).
Rolling Confirmation Rate (% of recent sweeps that became SACs) over a configurable window (default 50). The script's own success metric.
Pending sweep status with bars-remaining-in-cluster-window.
Last SAC direction with strength badge and bars-ago.
Last failed sweep tag (when failed markers are enabled).
Confirmation Rate is the headline read — it lets you see whether the current threshold settings are producing meaningful or sparse signals on the instrument you are trading.
Alerts
Three alert conditions, each independently controllable:
Pending Sweep (Stage 1 fires)
SAC Confirmed (Stage 2 confirms)
SAC Failed (Stage 2 expires without confirming) — off by default
How to read it
Two reads, in order of conviction:
SAC Confirmed alert with a high strength badge — the script's intended signal. Liquidity was swept, a real rejection followed inside the window, and the rejection had body and volume. This is the actionable read.
Pending Sweep at a known structural level (S/R, supply/demand) — useful as a "watch for the cluster" warning. If the cluster confirms, you have a high-conviction reversal at a structural location.
In persistent trends the failed-sweep rate climbs — that is the script telling you the regime does not currently favour sweep-and-reverse setups; stand aside or use the script in the trend direction only.
Suggested settings
Defaults (pivot lookback 8, wick ATR 0.8, body ratio 0.35, cluster window 5) are tuned for 15m–1H on liquid markets. For scalping (1m–5m), drop pivot lookback to 4 and cluster window to 3. For HTF macro reads (4H+), raise pivot lookback to 12–20 and cluster window to 8. The strict-threshold wick filters (0.8 ATR + 35%) are intentionally institutional — loosen for less liquid instruments.
Originality
The implementation — the five-condition strict sweep gate, the rolling minor-pivot cache with age and scan-depth filters, the three-condition cluster confirmation, the cluster-strength badge calculation, the pending → confirmed → failed state machine, the wick-level highlight render, the plotcandle override for confirming bars, the rolling confirmation-rate metric, and the session-reset counter — is JOAT-original. No third-party code reused. The "sweep + reaction" pattern is well-known to professional tape readers; the strict double-gate implementation is built specifically for chart-based Pine data.
Limitations
A confirmed SAC requires the cluster window to elapse — by definition the signal carries the cluster window bars of lag relative to the sweep. This is intentional; the cluster is what makes the signal meaningful. Failed sweeps are expected — the confirmation rate metric is there for you to see and tune accordingly. The script is structure-aware (uses real pivots) but does not know about HTF structure; combine with a higher-timeframe S/R indicator for best fit.
—
—
-made with passion by jackofalltrades
Indicator
CVD Delta Divergence [JOAT]CVD DELTA DIVERGENCE
A full-featured Cumulative Volume Delta engine with proper pivot-based divergence detection. CVD on its own is one of the cleanest reads of net flow you can produce without L2 data — but the value of CVD lives almost entirely in its divergence with price. CVD Delta Divergence builds the CVD properly (with footprint-API or reconstructed-tick options), then runs a strict pivot-vs-pivot divergence engine on top of it, with strength scoring and configurable cooldown.
Three data-source modes
CVD is only as good as the delta classification underneath it. Three modes are exposed:
Footprint API — uses PulseWire's Footprint dataset when the instrument supports it. The cleanest read, equivalent to professional delta feeds.
Reconstructed — when Footprint is unavailable, reconstructs buy/sell from a configurable lower-timeframe stream (1m / 3m / 5m / 15m / 30m) using the standard tick rule. Optional intrabar volume weighting.
Auto — picks Footprint when present, falls back to Reconstructed. The recommended default.
This is unusual — most public CVD scripts hardcode one method. Auto-mode means the script works correctly on any instrument that has either dataset, without per-instrument configuration.
Four CVD anchors
Cumulative deltas need an anchor — running a sum from inception of data is rarely meaningful. Four anchoring modes:
Cumulative — never resets. Maximum context, slowest divergence detection.
Session Reset (default) — anchors at the start of each trading session. The most useful read for day-trading reference.
Day Reset — anchors at midnight exchange time.
Week Reset — anchors at week boundary. Good for swing-frame divergences.
Pivot-based divergence engine (the headline)
Slope-comparison divergence is noisy. CVD Delta Divergence uses proper pivots :
ta.pivothigh / ta.pivotlow on price with a configurable lookback (default 5 bars left/right).
At each confirmed pivot, the corresponding CVD value is recorded.
A divergence is built only when two price pivots and their CVD readings disagree directionally.
A minimum-strength filter (default 15.0 on a 0–100 scale) suppresses weak signals — strength is the normalised disagreement magnitude between the price-pivot motion and the CVD-pivot motion.
A strict HL/LL toggle requires the second pivot to strictly exceed/undershoot the first by a small fraction so equal-pivot edge cases do not produce noise divergences.
A cooldown per divergence class (default 3 bars) prevents back-to-back fires of the same class.
Four divergence classes are detected:
Regular Bull — price lower-low, CVD higher-low. Reversal up.
Regular Bear — price higher-high, CVD lower-high. Reversal down.
Hidden Bull — price higher-low, CVD lower-low. Trend continuation up.
Hidden Bear — price lower-high, CVD higher-high. Trend continuation down.
Divergence markers can be force-overlaid onto the main chart pane (toggleable) so you see them on price without flipping panes.
Visual system
Slope-coloured CVD line — bull / bear gradient based on the CVD's own short-term slope (configurable window).
Smoothed CVD overlay — toggleable EMA-smoothed CVD on top of the raw line. Useful for cutting through noisy 1m reconstructions.
Delta histogram — bar-by-bar delta as columns behind the CVD line. Useful for seeing per-bar flow vs cumulative flow.
Zero line and crossover alerts.
Divergence connecting lines — when a divergence fires, a connector line is drawn between the two pivots for visual proof.
A locked Lava palette (gold bull / orange-red bear / oxblood mid on a deep lava-black ground) gives the pane a distinctive flow-read identity.
Dashboard
Monospaced table, positionable to any of eight corners, with:
Current CVD value with sign.
CVD slope direction (Rising / Falling / Flat).
Active anchor mode.
Last divergence class with bar age.
Source mode in use (Footprint / Reconstructed).
Zero-cross status with bars-ago.
Alerts
Six alert conditions, each independently controllable:
Regular Bull Divergence
Regular Bear Divergence
Hidden Bull Divergence
Hidden Bear Divergence
CVD Crosses Zero
CVD Slope Flips
How to read it
Three reads, in order of conviction:
Regular divergence — the classic reversal read. Price made a new extreme, CVD did not. The flow that was needed to extend the move did not show up. A regular divergence at a known structural level is one of the highest-conviction reversal setups in tape reading.
Hidden divergence — the trend-continuation read. Price retraced, but CVD did not. The flow is still committed in the original direction even though price wavered. Often produces clean re-entry signals in trends.
CVD zero-cross + slope flip — the regime change read. Cumulative flow has rotated sides — what was net-buying is now net-selling (or vice versa). Useful as a "the tape has flipped" notification.
Suggested settings
Defaults are tuned for 5m–1H charts on liquid markets in Session Reset mode. For lower timeframes, drop pivot lookback to 3 and divergence window to 30. For higher timeframes, raise pivot lookback to 7–10 and switch anchor to Day Reset. The minimum strength threshold (15) is intentionally loose; raise to 25–30 if you want only the strongest divergences.
Originality / what's reused
CVD (cumulative volume delta) is public-domain market-structure language; the tick rule is standard. The implementation — the Auto/Footprint/Reconstructed source switch, the four-anchor reset logic, the pivot-based divergence engine with strict HL/LL gating and minimum-strength filter, the slope-coloured CVD with histogram backdrop, the force-overlay divergence markers, and the cooldown-per-class state machine — is JOAT-original and tuned together. No third-party code reused.
Open source
Published open-source under the default Mozilla Public License 2.0. The source is sectioned, every input has a tooltip, every helper is documented inline. The CVD engine, the source-mode router, the pivot logic, and the divergence engine are independent modules — adapt any single piece without reading the whole file.
Limitations
Reconstructed CVD is a proxy — the tick rule is the accepted public-market inference but it is not a direct read of bid vs ask volume. Footprint mode requires the PulseWire Footprint dataset and is unavailable on some instruments. Pivot divergences are non-repainting once confirmed (they lag by the pivot's right-lookback) but the divergence between two pivots cannot fire until both are confirmed — so the second pivot's lag is the structural lag of the signal.
—
-made with passion by jackofalltrades
Indicator
SmartBreak Fibo [TraderHook]SmartBreak Fibo
Stop drawing your setups by hand. SmartBreak watches market structure in real time, and the moment price breaks a structural swing — a BOS (Break of Structure) or CHoCH (Change of Character) — it instantly maps a full Fibonacci trade plan on your chart: entry, stop, and three targets. No manual fib dragging, no guesswork on where to place levels.
How it works
The engine tracks swing highs/lows and detects every structural break (BOS / CHoCH).
On each break, a Fibonacci is anchored from the broken swing (level 1) to the opposing swing (level 0).
Entry is plotted at the 0.618 retracement, Stop-Loss at level 0 (the swing extreme).
Three take-profits sit at fib extensions 2.0 / 2.618 / 3.618 .
A green box shows the profit zone (entry → TP3), a red box shows the risk zone (entry → SL).
Why traders like it
Setups appear the instant structure breaks — you decide whether to take them, the levels are already there.
Long breaks are marked green, short breaks red — direction is readable at a glance.
Fully adjustable: entry level, all three TPs, pivot sensitivity, colors, and how many recent setups stay on screen.
"ChoCh only" mode if you prefer to trade reversals over trend continuations.
Settings
Pivot Period — structure sensitivity (higher = bigger swings only).
Entry / TP1 / TP2 / TP3 — every fib level is yours to tune.
Number of recent setups — keep the chart clean with just the latest, or show history.
Long / Short setups — toggle either side on or off.
Credits
The market-structure engine (ZigZag, swing classification, BOS/CHoCH) is based on the open-source work of TFlab , used under the Mozilla Public License 2.0. The Fibonacci trade-box system is by TraderHook. Published open-source — feel free to study and build on it.
Disclaimer
This is a visualization tool, not financial advice or a signal service. The take-profit levels are mechanical Fibonacci extensions — they do not predict that price will reach any target. Always backtest and manage your own risk before trading. Indicator
Indicator
Custom FractalsThis indicator detects custom bullish and bearish fractal formations by identifying confirmed swing highs and swing lows based on user-defined candle structure. A bearish fractal forms when a candle’s high is greater than the surrounding candles, while a bullish fractal forms when a candle’s low is lower than the surrounding candles. Optional RSI confirmation can be applied to filter signals so that bearish fractals only appear in overbought conditions and bullish fractals only appear in oversold conditions. The script can also draw horizontal pivot levels from each confirmed fractal to help visualize potential support and resistance zones.
“Bars Before” controls how many candles to the left of the pivot must confirm the fractal structure, while “Bars After” determines how many candles to the right are required before the signal becomes confirmed. Larger settings create stronger but less frequent fractals, while smaller settings react faster and generate more signals. “Non-Repaint Signals” waits for candle close confirmation before plotting signals to reduce repaint behavior during live market conditions. “Draw Horizontal Pivot Lines” displays support and resistance lines extending from confirmed fractals.
“Limit to Recent Signals Only” restricts how many historical fractals remain visible on the chart, while “Recent Signal Count” defines the maximum number of stored signals and pivot lines. “Use RSI Confirmation” enables momentum filtering using the Relative Strength Index. “RSI Length” controls the RSI calculation period, “RSI Source” selects the price source used for RSI calculations, and the “RSI Overbought” and “RSI Oversold” levels determine where RSI confirmation is required for bearish and bullish fractals.
The pivot line settings allow full customization of the horizontal structure levels. “Pivot Line Length” controls how far the level extends into future candles, while the color, width, and style settings customize the appearance of bullish and bearish pivot zones.
This tool is designed for traders who want to identify potential reversal zones, short-term exhaustion points, and key support or resistance levels using price structure and optional momentum confirmation. Indicator
Adaptive Fibonacci Compass [JOAT]Adaptive Fibonacci Compass
Overview
Adaptive Fibonacci Compass is a dynamic, pivot-anchored Fibonacci retracement and extension system built in Pine Script v6. It continuously detects the most recent confirmed swing pivot pair, grades the pivot's ATR-normalised strength, checks for Break of Structure or Change of Character on the swing axis, then draws a live Fibonacci grid of seven standard levels (0, 0.236, 0.382, 0.5, 0.618, 0.786, 1.0) with fill-highlighted Optimal Trade Entry zones (OTE: 0.382–0.618 and 0.618–0.786) — all rendered at barstate.islast using the delete-before-create pattern for zero ghost-drawing artifacts.
Why Adaptive Fibonacci?
Static Fibonacci tools require manual anchor selection, which introduces subjectivity and results in different traders drawing the same move differently. Adaptive Fibonacci Compass removes this ambiguity by algorithmically detecting the pivot pair that defines the most recent significant swing and anchoring the grid there automatically. The grid updates whenever a new, stronger pivot forms — keeping the Fibonacci reference aligned with the current market structure without any manual intervention.
Pivot Detection and ATR Strength Grading
Swing pivots are detected using ta.pivothigh() and ta.pivotlow() with configurable left and right bar confirmation windows (default 10/10). When a new pivot forms, its ATR-normalised strength is computed:
Strength = (pivotHigh - pivotLow) / ATR(14)
This ratio grades the swing on a universal scale independent of price level or instrument. Pivots grading above a configurable minimum strength (default 1.5 ATR) are accepted as valid Fibonacci anchors. Smaller price structures that do not meet the threshold are ignored, preventing the grid from anchoring to noise.
BOS / CHoCH Detection on Pivot Axis
Each time a new pivot pair is accepted, the engine checks whether the new swing extreme exceeds the prior swing extreme of the same type:
- BOS Up: New swing high exceeds the previous swing high — structural expansion to the upside
- BOS Down: New swing low is below the previous swing low — structural expansion to the downside
- CHoCH: A swing extreme that forms against the prevailing structure — e.g., a new swing high forming when prior context was bearish
BOS and CHoCH labels are stamped at the pivot level to provide structural context for interpreting the Fibonacci grid.
Dynamic Fibonacci Grid (7 Levels)
The grid spans from the last confirmed swing low to the last confirmed swing high (for bullish pivots) or the reverse (for bearish pivots). Seven retracement levels are drawn as horizontal lines:
- 0.0 (swing origin) — white/neutral
- 0.236 — subtle grey
- 0.382 — teal (start of OTE zone)
- 0.5 — gold (midpoint)
- 0.618 — teal (end of deep OTE zone)
- 0.786 — purple
- 1.0 (swing extreme) — white/neutral
Each level label shows both the ratio and the exact price value.
Optimal Trade Entry (OTE) Fill Zones
Two fill zones are highlighted as semi-transparent boxes between specific Fibonacci levels, representing the confluence areas where institutional entries are statistically most concentrated:
- OTE 0.382–0.618: The standard OTE zone — the area of highest probability for pullback continuation trades
- OTE 0.618–0.786: The deep OTE zone — commonly used for higher-conviction reversal entries where the move has retraced deeply into the prior swing
Both zones are rendered with directional colour (teal for bullish swings, red for bearish swings) at 80–85% transparency.
Live Pivot Tracking and Grid Refresh
On every bar, the indicator tracks whether price is forming a new potential extreme beyond the current grid's anchor. When a new confirmed pivot qualifies (passes the ATR strength threshold), the previous grid is fully deleted (all lines, labels, and boxes) and rebuilt from the new anchor points. The delete-before-create pattern at barstate.islast ensures no duplicate or orphaned drawing objects accumulate over the session.
Inputs Reference
- Pivot Left Bars (10) — left confirmation bars for swing detection
- Pivot Right Bars (10) — right confirmation bars for swing detection
- Min ATR Strength (1.5) — minimum swing size in ATR units to accept as a valid anchor
- Show Fib Grid — toggles the full Fibonacci grid
- Show OTE Zones — toggles the 0.382–0.618 and 0.618–0.786 fill zones
- Show BOS / CHoCH Labels — toggles structural labels on pivot extremes
- Show Level Labels — toggles price and ratio annotations on each Fibonacci line
- Extend Lines (bars, default 30) — how far right the grid lines extend from the current bar
- Theme: Dark, Light, Auto
How to Use
1. Apply to any liquid market on any timeframe. The indicator needs at least (PivotLeft + PivotRight) * 3 bars to warm up.
2. The gold 0.5 level and teal 0.382/0.618 lines define the primary trade management area. In a confirmed uptrend, look for price to pull back into the OTE 0.382–0.618 zone with a bullish reaction for long entries.
3. The deep OTE 0.618–0.786 zone is valid for entries only in strong, high-momentum swings where the pullback is orderly and accompanied by decreasing volume.
4. Treat the 0.0 and 1.0 levels as structural extremes. A confirmed close beyond the 1.0 level triggers a new BOS and should cause the grid to reload on the next qualifying pivot.
5. Use BOS labels to confirm that the current Fibonacci swing direction aligns with the broader structural bias from a higher timeframe.
Non-Repainting Design
Pivots are only detected once the full right-bar confirmation period has elapsed. The grid is always anchored to confirmed historical pivots. No drawing is created based on the current in-progress bar. All grid refreshes occur at barstate.islast using confirmed pivot data.
Limitations
- The indicator anchors to the most recent qualifying pivot pair. In multi-week trends with no significant retracement, the grid may anchor to a very old pivot that is no longer contextually relevant.
- The minimum ATR strength filter helps but does not eliminate all noise pivots on highly volatile instruments. Increasing the threshold on crypto assets is recommended.
- Fibonacci levels are probabilistic reference zones, not guaranteed reversal or support/resistance levels. Confluence with other structure (OBs, PDH/PDL, volume profile POC) significantly increases their reliability.
- The grid does not account for higher-timeframe Fibonacci structures. Always check alignment with HTF pivots manually.
Disclaimer
This indicator is for educational and informational purposes only. Fibonacci retracements are historical price relationships and do not predict future market behaviour with certainty. Always use proper risk management and conduct your own analysis.
Made with passion by officialjackofalltrades
Indicator
ICT Killzones & Pivots [TFO] - Traditional Chinese VersionICT 殺戮區與樞紐點 — 繁體中文版
ICT Killzones & Pivots — Traditional Chinese Edition
📌 概述 | Overview
本指標為廣受交易者使用的「ICT Killzones & Pivots 」之繁體中文本地化版本，完整保留原版所有功能，並將全部介面文字、設定選單、標籤與警報訊息翻譯為繁體中文，大幅降低中文使用者的操作門檻。
This is a Traditional Chinese localization of the well-known "ICT Killzones & Pivots " indicator. All original functionalities are fully preserved, with every interface element — including settings panels, labels, and alert messages — translated into Traditional Chinese to improve accessibility for Mandarin-speaking traders.
🕐 殺戮區（Killzones）| Session Killzones
根據 ICT（Inner Circle Trader）概念，機構資金最活躍的時段稱為「殺戮區」。本指標預設標記以下五個關鍵時段（以紐約時間為基準）：
Based on ICT (Inner Circle Trader) concepts, the periods of highest institutional activity are known as "Killzones." The following five key sessions are marked by default (New York time):
時段 Session時間 Time (ET)🔵 亞洲盤 Asia20:00 – 00:00🔴 倫敦盤 London02:00 – 05:00🟢 紐約早盤 NY AM09:30 – 11:00🟡 紐約午休 NY Lunch12:00 – 13:00🟣 紐約下午盤 NY PM13:30 – 16:00
每個時段皆可個別啟用／停用，並自訂名稱與顏色。
Each session can be individually toggled, renamed, and color-customized.
📐 核心功能 | Core Features
殺戮區方塊 | Session Boxes
以半透明色塊標示各殺戮區範圍，清晰呈現每個時段的高低點震盪區間。
Translucent boxes highlight each killzone's high-to-low range, providing a clear visual of intraday price structure.
樞紐點線 | Pivot Lines
自動標記每個殺戮區結束後的最高點與最低點，並在未被突破前持續延伸，協助識別關鍵支撐與壓力位。
Automatically marks the high and low of each completed killzone session. Lines extend until the level is mitigated, helping identify key support and resistance.
中間點 | Midpoint Lines
可選擇顯示每個殺戮區的50%均衡價位，常作為潛在回撤目標。
An optional display of the 50% equilibrium level within each killzone, commonly used as a retracement target.
振幅統計表 | Range Table
即時顯示各殺戮區的當前振幅與歷史平均振幅，協助評估當日市場波動性。
A real-time table displaying the current and historical average range of each killzone, useful for assessing daily market volatility.
日／週／月開盤線與高低點 | D/W/M Open & High/Low Lines
標記日、週、月級別的開盤價、前高與前低，提供多時間框架的重要參考價位。
Marks the open price and prior high/low for daily, weekly, and monthly timeframes as key multi-timeframe reference levels.
開盤價格線 | Custom Opening Price Lines
最多支援8條自訂時間的水平開盤線，可自行設定任意時間點（如真實日開盤00:00、倫敦開盤等）。
Up to 8 custom horizontal open price lines, configurable for any time (e.g., True Day Open at 00:00, London open, etc.).
星期標籤 | Day-of-Week Labels
在圖表底部或頂部自動顯示星期幾標籤，輔助辨識每日結構。
Automatically displays day-of-week labels at the top or bottom of the chart to assist with daily structural analysis.
時間戳記線 | Timestamp Vertical Lines
最多可設定4條自訂垂直時間線，標記任意重要時間節點（如經濟數據公布時間、特定開盤時間等）。
Up to 4 custom vertical timestamp lines to mark important time events such as economic releases or specific session opens.
突破警報 | Break Alerts
當價格突破殺戮區樞紐高低點，或日／週／月高低點時，自動觸發 PulseWire 警報通知。
Automatically triggers PulseWire alerts when price breaks through killzone pivot levels or D/W/M high/low levels.
⚙️ 主要設定 | Key Settings
繪圖保留天數：控制圖表上各類繪圖的最大顯示筆數
時間框架上限：超過指定時間框架後自動隱藏所有繪圖
時區：支援全球主要時區，預設為紐約時間
繪圖截止時間：可設定樞紐線與開盤線的自動停止延伸時間
樞紐延伸模式：「直到被突破」或「突破後繼續」兩種模式可選
Session Drawing Limit: Controls the maximum number of drawings retained on the chart
Timeframe Limit: Automatically hides all drawings above the specified timeframe
Timezone: Supports all major global timezones, defaulting to New York (ET)
Drawing Cutoff Time: Optionally stops pivot and open lines from extending at a set time
Pivot Extension Mode: Choose between "Until Mitigated" or "Past Mitigation"
🌐 本地化說明 | Localization Notes
本版本為原作者 @tradeforopp 所著「ICT Killzones & Pivots 」之繁體中文翻譯版，依據 Mozilla Public License 2.0 授權發佈。所有交易邏輯、核心演算法與功能設計之著作權均歸屬於原作者。本版本僅對使用者介面文字進行在地化處理，未更動任何核心程式邏輯。
This is a Traditional Chinese translation of "ICT Killzones & Pivots " originally authored by @tradeforopp, published under the Mozilla Public License 2.0. All trading logic, core algorithms, and functional design remain the intellectual property of the original author. This version only localizes the user interface text without modifying any core logic.
⚠️ 免責聲明 | Disclaimer
本指標僅供技術分析參考用途，不構成任何投資建議。交易涉及風險，請依據個人風險承受能力審慎決策。
This indicator is provided for technical analysis reference purposes only and does not constitute investment advice. Trading involves risk; please make decisions according to your own risk tolerance.
原始腳本 Original Script：ICT Killzones & Pivots by @tradeforopp
授權 License：Mozilla Public License 2.0 Indicator
Trend Pulse [BigBeluga]🔵 OVERVIEW
Trend Pulse is a structure-driven trend detection indicator that identifies bullish and bearish regime shifts using confirmed pivot breaks and an adaptive volatility-aware trend band.
Instead of relying on momentum oscillators or fixed moving averages, Trend Pulse focuses on market structure, price expansion, and trend aging to determine when a trend starts, matures, and potentially exhausts.
The indicator is designed to visually communicate trend state directly on price using adaptive bands and progressive color transitions.
🔵 CONCEPT
Structure First — Trend direction is defined by confirmed pivot lows and their breaks, not by indicators crossing indicators.
Adaptive Trend Band — A volatility-adjusted SMA band expands over time during bearish phases, making late trend reversals harder to trigger.
Break-Based Trend Shifts — Bullish trends are confirmed only when price breaks above the adaptive band; bearish trends are confirmed by breaking below structural pivots.
Trend Aging — Trend strength is visualized by time-based color gradients that reflect how long a trend has been active, not momentum.
🔵 KEY FEATURES
Pivot-Based Bearish Detection
A bearish trend is triggered only after a confirmed pivot low is broken. This avoids reacting to temporary pullbacks or intrabar noise.
Real-time pivot low level tracking
During a bullish trend, the indicator displays the most recent pivot low level and extends it to the latest bar. This helps identify a potential level where the bullish trend may reverse into a downtrend.
Adaptive Volatility Band
The trend band is built from:
A dynamically expanding SMA length
ATR-based offset for volatility normalization
As the bearish trend matures, the band widens, requiring stronger price expansion to flip the trend back bullish.
Bullish Trend Confirmation via Band Break
A bullish trend is confirmed only when price breaks above the adaptive band, signaling genuine upside expansion rather than a weak bounce.
Automatic Band Reset
On bullish trend shifts, the adaptive band resets to a shorter length, allowing faster reaction to early trend stages.
Time-Based Trend Coloring
Trend color transitions from:
Fresh → Mature
Bullish → Bearish
based purely on how long the trend has persisted since the last flip.
Clear Structural Markers
The indicator plots:
- Confirmed pivot lows
- Bearish breakdown points
- Bullish breakout points
directly on the chart for structural clarity.
Full Candle Coloring
Candles inherit the current trend color, allowing instant visual recognition of market regime without additional indicators.
🔵 HOW TO USE
Use bearish trend shifts to identify structural breakdowns, not just momentum pullbacks.
Treat bullish breaks as confirmation of real trend reversals, not early counter-trend signals.
Use trend color aging to gauge whether a move is early-stage or potentially mature.
Avoid fading trends solely based on color maturity — use it as context, not a reversal signal.
Combine Trend Pulse with structure tools (order blocks, liquidity zones, volume) for higher-confidence entries.
🔵 CONCLUSION
Trend Pulse is a structure-aware trend engine built around confirmed pivots, adaptive volatility logic, and time-based trend visualization.
By separating trend direction from trend age , it avoids common indicator pitfalls such as over-sensitivity and late momentum signals.
This makes Trend Pulse especially effective for traders who want clear regime definition, disciplined trend confirmation, and visual clarity directly on price — without relying on lagging oscillators or fixed moving average systems. Indicator
Pivot Strategy [OmegaTools]Pivot Strategy by OmegaTools is a systematic trading strategy designed to evaluate price behavior around key pivot point levels. The script builds a complete pivot framework using the selected calculation method, with support for Traditional, Fibonacci, Woodie, Classic, and Camarilla pivots. From this structure, the strategy derives the central pivot level together with the first three resistance and support extensions, creating a clear and objective map of potential reaction zones for the session.
This script shouldn't be used as a stand alone strategy, a proper trigger and confluence filters are missing, instead try using this script to study market reaction to key levels in order to be able to create and test your own strategy.
The strategy is built around two distinct execution models. In TF mode, it operates as a breakout system, entering long positions when price closes upward through the selected bullish pivot level and entering short positions when price closes downward through the selected bearish pivot level. In MR mode, the logic shifts to a mean reversion framework, taking the opposite side of a level interaction: a touch of the selected support-side level from above can trigger a long entry, while a touch of the selected resistance-side level from below can trigger a short entry. This dual structure allows the script to be adapted to both continuation-driven and reversal-driven market conditions.
Entry selection is configurable through the central pivot or through one of the first three support/resistance tiers, allowing traders to test different degrees of aggressiveness and selectivity. A central-pivot configuration may produce more frequent signals, while higher-level entries such as SR2 or SR3 generally focus on more extended price movement before participation. This makes the strategy suitable not only for direct backtesting, but also for comparative research across instruments, volatility regimes, and pivot methodologies.
Risk management is handled through pivot-based exit logic. Stop loss and take profit levels are independently configurable and are mapped directly to the pivot structure. For long positions, stop losses are derived from the support side and take profits from the resistance side. For short positions, the inverse logic is applied. The script also validates these levels relative to the average entry price, so exits remain structurally coherent with the active position. This keeps the framework simple, transparent, and fully anchored to the same pivot environment used for entries.
To reinforce execution discipline, the strategy includes a maximum trades per day parameter, limiting the number of entries allowed during each reset cycle. At the beginning of a new reset period, the strategy clears its internal trade counter and closes any open position, ensuring that each new session starts independently from the previous one. This design makes the model particularly useful for traders who want strict session-based behavior and clean daily segmentation in their testing.
Overall, Pivot Strategy is intended for traders and quantitative researchers seeking a structured way to test pivot-driven breakout and mean reversion behavior with clearly defined rules. It is especially useful for studying how different pivot formulas, entry locations, and exit configurations influence performance across markets and timeframes, while maintaining a consistent and interpretable framework.
Disclaimer: This script is provided for educational and research purposes only. It does not constitute financial advice, investment advice, trading advice, or a recommendation to buy or sell any financial instrument. Past performance, backtest results, and hypothetical simulations are not indicative of future results. Market conditions, slippage, commissions, execution differences, and instrument-specific factors can materially affect real-world performance. Users should conduct their own analysis, apply proper risk management, and perform thorough out-of-sample validation before considering any live use. Strategy
Pivot Point Zones [JOAT]Pivot Point Zones — Multi-Formula Pivot Levels with ATR Zones
Pivot Point Zones calculates and displays traditional pivot points with five formula options, enhanced with ATR-based zones around each level. This creates more practical trading zones that account for price noise around key levels—because price rarely reacts at exact mathematical levels.
What Makes This Indicator Unique
Unlike basic pivot point indicators, Pivot Point Zones:
Offers five different pivot calculation formulas in one indicator
Creates ATR-based zones around each level for realistic reaction areas
Pulls data from higher timeframes automatically
Displays clean labels with exact price values
Provides a comprehensive dashboard with all levels
What This Indicator Does
Calculates pivot points using Standard, Fibonacci, Camarilla, Woodie, and more formulas
Draws horizontal lines at Pivot, R1-R3, and S1-S3 levels
Creates ATR-based zones around each level for realistic price reaction areas
Displays labels with exact price values
Updates automatically based on higher timeframe closes
Provides fills between zone boundaries for visual clarity
Pivot Formulas Explained
// Standard Pivot - Classic (H+L+C)/3 calculation
pp := (pivotHigh + pivotLow + pivotClose) / 3
r1 := 2 * pp - pivotLow
s1 := 2 * pp - pivotHigh
r2 := pp + pivotRange
s2 := pp - pivotRange
// Fibonacci Pivot - Uses Fib ratios for level spacing
r1 := pp + 0.382 * pivotRange
r2 := pp + 0.618 * pivotRange
r3 := pp + 1.0 * pivotRange
// Camarilla Pivot - Tighter levels for intraday
r1 := pivotClose + pivotRange * 1.1 / 12
r2 := pivotClose + pivotRange * 1.1 / 6
r3 := pivotClose + pivotRange * 1.1 / 4
// Woodie Pivot - Weights current close more heavily
pp := (pivotHigh + pivotLow + 2 * close) / 4
// TD Pivot - Conditional based on open/close relationship
x = pivotClose < pivotOpen ? pivotHigh + 2*pivotLow + pivotClose :
pivotClose > pivotOpen ? 2*pivotHigh + pivotLow + pivotClose :
pivotHigh + pivotLow + 2*pivotClose
pp := x / 4
Formula Characteristics
Standard — Classic pivot calculation. Balanced levels, good for swing trading.
Fibonacci — Uses 0.382, 0.618, and 1.0 ratios. Popular with Fibonacci traders.
Camarilla — Tighter levels derived from range. Excellent for intraday mean-reversion.
Woodie — Weights current close more heavily. More responsive to recent price action.
TD — Conditional calculation based on open/close relationship. Adapts to bar type.
Zone System
Each pivot level includes an ATR-based zone that provides a more realistic area for potential price reactions:
// ATR-based zone width calculation
float atr = ta.atr(atrLength)
float zoneHalf = atr * zoneWidth / 2
// Zone boundaries around each level
zoneUpper = level + zoneHalf
zoneLower = level - zoneHalf
This accounts for market noise and helps avoid false breakout signals at exact level prices.
Visual Features
Pivot Lines — Horizontal lines at each calculated level
Zone Fills — Transparent fills between zone boundaries
Level Labels — Labels showing level name and exact price (e.g., "PP 45123.50")
Color Coding :
- Yellow: Pivot Point (PP)
- Red gradient: Resistance levels (R1, R2, R3) - darker = further from PP
- Green gradient: Support levels (S1, S2, S3) - darker = further from PP
Color Scheme
Pivot Color — Default: #FFEB3B (yellow) — Central pivot point
Resistance Color — Default: #FF5252 (red) — R1, R2, R3 levels
Support Color — Default: #4CAF50 (green) — S1, S2, S3 levels
Zone Transparency — 85-90% transparent fills around levels
Dashboard Information
The on-chart table (bottom-right corner) displays:
Selected pivot type (Standard, Fibonacci, etc.)
R3, R2, R1 resistance levels with exact prices
PP (Pivot Point) highlighted
S1, S2, S3 support levels with exact prices
Inputs Overview
Pivot Settings:
Pivot Type — Formula selection (Standard, Fibonacci, Camarilla, Woodie, TD)
Pivot Timeframe — Higher timeframe for OHLC data (default: D = Daily)
ATR Length — Period for zone width calculation (default: 14)
Zone Width — ATR multiplier for zone size (default: 0.5)
Level Display:
Show Pivot (P) — Toggle central pivot line
Show R1/S1 — Toggle first resistance/support levels
Show R2/S2 — Toggle second resistance/support levels
Show R3/S3 — Toggle third resistance/support levels
Show Zones — Toggle ATR-based zone fills
Show Labels — Toggle price labels at each level
Visual Settings:
Pivot/Resistance/Support Colors — Customizable color scheme
Line Width — Thickness of level lines (default: 2)
Extend Lines Right — Project lines forward on chart
Show Dashboard — Toggle the information table
How to Use It
For Intraday Trading:
Use Daily pivots on intraday charts (15m, 1H)
Pivot point often acts as the day's "fair value" reference
Camarilla levels work well for intraday mean-reversion
R1/S1 are the most commonly tested levels
For Swing Trading:
Use Weekly pivots on daily charts
Standard or Fibonacci formulas work well
R2/S2 and R3/S3 become more relevant
Zone boundaries provide realistic entry/exit areas
For Support/Resistance:
R levels above price act as resistance targets
S levels below price act as support targets
Zone boundaries are more realistic than exact lines
Multiple formula confluence adds significance
Alerts Available
DPZ Cross Above Pivot — Price crosses above central pivot
DPZ Cross Below Pivot — Price crosses below central pivot
DPZ Cross Above R1/R2 — Price breaks resistance levels
DPZ Cross Below S1/S2 — Price breaks support levels
Best Practices
Match pivot timeframe to your trading style (Daily for intraday, Weekly for swing)
Use zones instead of exact levels for more realistic expectations
Camarilla is best for mean-reversion; Standard/Fibonacci for breakouts
Combine with other indicators for confirmation
— Made with passion by officialjackofalltrades
Indicator
Indicator
Multi Pivot Trend [BigBeluga]🔵 OVERVIEW
The Multi Pivot Trend is an advanced market-structure-driven trend engine that evaluates trend strength by scanning multiple pivot breakouts simultaneously.
Instead of relying on a single swing length, it tracks breakouts across ten increasing pivot lengths — then averages their behavior to produce a smooth, reliable trend reading.
Mitigation logic (close, wick, or HL2 touches) controls how breakouts are confirmed, giving traders institutional-style flexibility similar to BOS/CHoCH validation rules.
This indicator not only colors candles based on trend strength, but also extends trend strength and volatility-scaled projection candles to show where trend pressure may expand next.
Pivot breakout lines and labels mark key changes, making the trend transitions extremely clear.
🔵 CONCEPTS
Market trend strength is reflected by multiple pivot breakouts, not just one.
The indicator analyzes ten pivot structures from smaller to larger swings.
Each bullish or bearish pivot breakout contributes to trend score.
Mitigation options (close / wick / HL2) imitate smart-money breakout confirmation logic.
Trend score is averaged and translated into colors and extension bars.
Neutral regime ≈ weak trend or transition zone (trend compression).
🔵 FEATURES
Multi-Pivot Engine — tracks 10 pivot-based trend signals simultaneously.
Mitigation Modes :
• Close — breakout requires candle close beyond pivot
• Wicks — breakout requires wick violation
• HL2 — breakout confirmed when average (H+L)/2 crosses level
Dynamic Color System :
• Blue → confirmed bullish rotation
• Red → confirmed bearish rotation
• Orange → neutral / transition state
Breakout Visualization — draws pivot breakout lines in real-time.
Trend Labels — prints trend %.
Trend Volatility-Scaled Extension Candles — ATR/trend strength based candle projections show momentum continuation strength.
Gradient Pivot Encoding — higher pivot lengths = deeper structure considered.
🔵 HOW TO USE
Use strong blue/red periods to follow dominant structural trend.
Watch for color transition into orange — possible trend change or consolidation.
Pivot breakout lines help validate structure shifts without clutter.
Wick mitigation catches aggressive liquidity-sweep based breaks.
Close/HL2 mitigation catches cleaner market structure rotations.
Extension bars visualize trend pressure — large extensions = strong push.
Best paired with volume or volatility confirmation tools.
🔵 CONCLUSION
The Multi Pivot Trend is a structural trend recognition system that blends multiple pivot breakouts into one clean trend score — with institutional-style mitigation logic and volatility-projected trend extensions.
It gives traders a powerful, visually intuitive way to track momentum, spot trend rotations early, and understand true structural flow beyond simple MA-based approaches.
Use it to stay aligned with the dominant swing direction while avoiding noise and false flips.
Indicator
Trend Pivots Profile [BigBeluga]🔵 OVERVIEW
The Trend Pivots Profile is a dynamic volume profile tool that builds profiles around pivot points to reveal where liquidity accumulates during trend shifts. When the market is in an uptrend , the indicator generates profiles at low pivots . In a downtrend , it builds them at high pivots . Each profile is constructed using lower timeframe volume data for higher resolution, making it highly precise even in limited space. A colored trendline helps traders instantly recognize the prevailing trend and anticipate which type of profile (bullish or bearish) will form.
🔵 CONCEPTS
Pivot-Driven Profiles : Profiles are only created when a new pivot forms, aligning liquidity analysis with market structure shifts.
Trend-Contextual : Profiles form at low pivots in uptrends and at high pivots in downtrends.
Lower Timeframe Data : Volume and close values are pulled from smaller timeframes to provide detailed, high-resolution profiles inside larger pivot windows.
Adaptive Bin Sizing : Bin size is automatically calculated relative to ATR, ensuring consistent precision across different markets and volatility conditions.
Point of Control (PoC) : The highest-volume level within each profile is marked with a PoC line that extends until the next pivot forms.
Trendline Visualization : A wide, semi-transparent line follows the rolling average of highs and lows, colored blue in uptrends and orange in downtrends.
🔵 FEATURES
Pivot Length Control : Adjust how far back the script looks to detect pivots (e.g., length 5 → profiles cover 10 bars after pivot).
Pivot Profile toggle :
On → draw the filled pivot profile + PoC + pivot label.
Off → hide profiles; show only PoC level (clean S/R mode).
Trend Length Filter : Smooths trendline detection to ensure reliable up/down bias.
Precise Volume Distribution : Volume is aggregated into bins, creating a smooth volume curve around the pivot range.
PoC Extension : Automatically extends the most active price level until a new pivot is confirmed.
Profile Visualization : Profiles appear as filled shapes anchored at the pivot candle, colored based on trend.
Trendline Overlay : Thick, semi-transparent trendline provides visual guidance on directional bias.
Automatic Cleanup : Old profiles are deleted once they exceed the chart’s capacity (default 25 stored profiles).
🔵 HOW TO USE
Spotting Trend Liquidity : In an uptrend, monitor profiles at low pivots to see where buyers concentrated. In downtrends, use high-pivot profiles to spot sell-side pressure.
Watch the PoC : The PoC line highlights the strongest traded level of the pivot structure—expect reactions when price retests it.
Anticipate Trend Continuation/Reversal : Use the trendline (blue = bullish, orange = bearish) together with pivot profiles to forecast directional momentum.
Combine with HTF Context : Overlay with higher timeframe structure (order blocks, liquidity zones, or FVGs) for confluence.
Fine-Tune with Inputs : Adjust Pivot Length for sensitivity and Trend Length for smoother or faster trend shifts.
🔵 CONCLUSION
The Trend Pivots Profile blends pivot-based structure with precise volume profiling. By dynamically plotting profiles on pivots aligned with the prevailing trend, highlighting PoCs, and overlaying a directional trendline, it equips traders with a clear view of liquidity clusters and directional momentum—ideal for anticipating reactions, pullbacks, or breakouts. Indicator
Pivot Trend Flow [BigBeluga]🔵 OVERVIEW
Pivot Trend Flow turns raw swing points into a clean, adaptive trend band. It averages recent pivot highs and lows to form two dynamic reference levels; when price crosses above the averaged highs, trend flips bullish and a green band is drawn; when it crosses below the averaged lows, trend flips bearish and a red band is drawn. During an uptrend the script highlights breakouts of previous pivot highs with ▲ labels, and during a downtrend it flags breakdowns of previous pivot lows with ▼ labels—making structure shifts and continuation signals obvious.
🔵 CONCEPTS
Pivot-Based Averages : Recent pivot highs/lows are collected and averaged to create smoothed upper/lower reference levels.
if not na(ph)
phArray.push(ph)
if not na(pl)
plArray.push(pl)
if phArray.size() > avgWindow
upper := phArray.avg()
phArray.shift()
if plArray.size() > avgWindow
lower := plArray.avg()
plArray.shift()
Trend State via Crosses : Close above the averaged-highs ⇒ bullish trend; close below the averaged-lows ⇒ bearish trend.
Trend Band : A colored band (green/red) is plotted and optionally filled to visualize the active regime around price.
Structure Triggers :
In bull mode the tool watches for prior pivot-high breakouts (▲).
In bear mode it watches for prior pivot-low breakdowns (▼).
🔵 FEATURES
Adaptive Trend Detection from averaged pivot highs/lows.
Clear Visuals : Green band in uptrends, red band in downtrends; optional fill for quick read.
Breakout/Breakdown Labels :
▲ marks breaks of previous pivot highs in uptrends
▼ marks breaks of previous pivot lows in downtrends
Minimal Clutter : Uses compact lines and labels that extend only on confirmation.
Customizable Colors & Fill for trend states and band styling.
🔵 HOW TO USE
Pivot Length : Sets how swing points are detected. Smaller = more reactive; larger = smoother.
Avg Window (pivots) : How many recent pivot highs/lows are averaged. Increase to stabilize the band; decrease for agility.
Read the Band :
Green band active ⇒ prioritize longs, pullback buys toward the band.
Red band active ⇒ prioritize shorts, pullback sells toward the band.
Trade the Triggers :
In bull mode, ▲ on a prior pivot-high break can confirm continuation.
In bear mode, ▼ on a prior pivot-low break can confirm continuation.
Combine with Context : Use HTF trend, S/R, or volume for confluence and to filter signals.
Fill Color Toggle : Enable/disable band fill to match your chart style.
🔵 CONCLUSION
Pivot Trend Flow converts swing structure into an actionable, low-lag trend framework. By blending averaged pivots with clean breakout/breakdown labels, it clarifies trend direction, timing, and continuation spots—ideal as a core bias tool or a confirmation layer in any trading system. Indicator
Trendline Breakout Strategy [KedArc Quant] Description
A single, rule-based system that builds two trendlines from confirmed swing pivots and trades their breakouts, with optional retest, trend-regime gates (EMA / HTF EMA), and ATR-based risk. All parts serve one decision flow: structure → breakout → gated entry → managed risk.
What it does (for traders)
Draws Up line (teal) through the last two Higher Lows and Down line (red) through the last two Lower Highs, then extends them forward.
Long when price breaks above red; Short when price breaks below teal.
Optional Retest entry: after a break, wait for a pullback toward the broken line within an ATR-scaled buffer.
Uses ATR stop and R-multiple target so risk is consistent across symbols/timeframes.
Labels HL1/HL2/LH1/LH2 so non-coders can verify which pivots built each line.
Why these components are combined
Pure breakout systems on trendlines suffer from three practical issues:
False breaks in chop → solved by trend-regime gates (EMA / HTF EMA) that only allow trades aligned with the prevailing trend.
Uneven volatility across markets/timeframes → solved by ATR-based stop/target, normalizing distance so R-multiples are comparable.
First break whipsaws near wedge apices → mitigated by the optional retest rule that demands a pullback/hold before entry.
These modules are not separate indicators with their own signals. They are support roles inside one method.
The pivot engine defines structure, the breakout detector defines signal, the regime gates decide if we’re allowed to take that signal, and the ATR module sizes risk.
Together they make the trendline breakout usable, testable, and explainable.
How it works (mechanism; each component explained)
1) Pivot engine (structure, non-repainting)
Swings are confirmed with ta.pivotlow/high(L, R). A pivot only exists after R bars (no look-ahead), so once plotted, the line built from those pivots will not repaint.
2) Trendline builder (geometry)
Teal line updates when two consecutive pivot lows satisfy HL2.price > HL1.price (and HL2 occurs after HL1).
Red line updates when two consecutive pivot highs satisfy LH2.price < LH1.price.
Lines are extended right and their current value is read every bar via line.get_price().
3) Breakout detector (signal)
On every bar, compute:
crossover(close, redLine) ⇒ Long breakout
crossunder(close, tealLine) ⇒ Short breakdown
4) Regime gates (trend filters, not separate signals)
EMA gate: allow longs only if close > EMA(len), shorts only if close < EMA(len).
HTF EMA gate (optional): same rule on a higher timeframe to avoid fighting the larger trend.
These do not create entries; they simply permit or block the breakout signal.
5) Retest module (optional confirmation)
After a breakout, record the line price. A valid retest occurs if price pulls back within an ATR-scaled buffer toward that broken line and then closes back in the breakout direction.
This reduces first-tick fakeouts.
6) Risk module (position exit)
Initial stop = ATR(len) × atrMult from entry.
Target = tpR × (ATR × atrMult) (e.g., 2R).
This keeps results consistent across instruments/timeframes.
Entries & exits
Long entry
Base: close breaks above red and passes EMA/HTF gates.
Retest (if enabled): after the break, price pulls back near the broken red line (within the ATR buffer) and holds; then enter.
Short entry
Mirror logic with teal (break below & gates), optionally with a retest.
Exit
strategy.exit places ATR stop & R-multiple target automatically.
Optional “flip”: close if the opposite base signal triggers.
How to use it (step-by-step)
Timeframe: 1–15m for intraday, 1–4h for swing.
Start defaults: Pivot L/R = 5, EMA len = 200, ATR len = 14, ATR mult = 2, TP = 2R, Retest = ON.
Tune sensitivity:
Faster lines (more trades): set L/R = 3–4.
Fewer counter-trend trades: enable HTF EMA (e.g., 60-min or Daily).
Visual audit: labels HL1/HL2 & LH1/LH2 show which pivots built each line—verify by eye.
Alerts: use Long breakout, Short breakdown, and Retest alerts to automate.
Originality (why it merits publication)
Trades the visualization: many “auto-trendline” tools only draw lines; this one turns them into testable, alertable rules.
Integrated design: each component has a defined role in the same pipeline—no unrelated indicators bolted together.
Transparent & non-repainting: pivot confirmation removes look-ahead; labels let non-coders understand the setup that produced each signal.
Notes & limitations
Lines update only after pivot confirmation; that lag is intentional to avoid repainting.
Breakouts near an apex can whipsaw; prefer Retest and/or HTF gate in choppy regimes.
Backtests are idealized; forward-test and size risk appropriately.
⚠️ Disclaimer
This script is provided for educational purposes only.
Past performance does not guarantee future results.
Trading involves risk, and users should exercise caution and use proper risk management when applying this strategy. Strategy
Pivot Points HL DetailedThis indicator marks important turning points in the market, showing you the most recent swing high and swing low as horizontal lines across the chart. Each pivot line has a price label where it formed and a small counter that updates whenever the market touches that level again. The line’s color reflects the prevailing trend, determined by an EMA filter, so you can quickly see if the level is likely acting as support or resistance in the current market environment.
It works by scanning recent bars for points where price made a local high higher than several bars to its left and right, or a local low lower than several bars to its left and right. These pivots are calculated directly from price action using the ta.pivothigh and ta.pivotlow functions. Once identified, the level is tracked in real time, counting every time price crosses it. The EMA provides context: if price is above the EMA, the market is considered in an uptrend and the pivots are colored to match; if price is below, they’re marked as part of a downtrend.
For traders, this offers a clean way to see where the market has turned before and whether those levels are still relevant. Strong levels often show multiple touches, which can be used for entries, exits, or risk management. The built-in alert system can notify you when price approaches either the most recent swing high or swing low, so you can react quickly.
This tool can be applied in almost any market — forex, stocks, indices, commodities, or crypto — because price tends to respect recent swing points regardless of the asset class. It tends to be most effective in liquid markets, where many traders see and react to the same key levels, and it’s valuable in both trending and ranging conditions, though the EMA trend filter adds extra clarity when the market is moving directionally. Indicator
