Falcon AI Lite | SMC Signal OverlayFalcon AI Lite is a free educational overlay that marks the two foundational Smart Money Concepts (SMC) patterns — Break of Structure (BOS) and Order Block (OB) — and highlights the zones where they align in confluence.
What it shows
▲ Green triangle (below bar) — Bullish Break of Structure
▼ Red triangle (above bar) — Bearish Break of Structure
● Gray dots — Tracked swing high/low levels
◆ Gold "FAL" label — 2-factor confluence: BOS + Order Block retest
When a gold "FAL" label appears, it means a Break of Structure has occurred AND price has pulled back into the relevant Order Block zone within the active session — the foundational SMC entry concept.
How to use it
1. Add to a 30-minute chart of MNQ or your preferred CME futures contract
2. Adjust the Session Window input to match your active trading hours
3. Observe how the FAL labels mark setups you might consider studying or trading
4. Your entry decision, your stop, your target, your risk management
Why SMC works
Smart Money Concepts is a market-structure-based methodology used by institutional traders. The Break of Structure confirms a directional shift in the market; the Order Block identifies where institutional orders were filled before the impulsive move. Watching for price to retest the Order Block after a BOS gives a higher-probability location for trade ideas than either signal alone.
What this is NOT
This indicator does NOT place trades. It does NOT backtest. It does NOT calculate position sizing. It does NOT include stop-loss or take-profit logic. It is an educational overlay for studying the SMC patterns — nothing more.
The full Falcon AI system uses 12-factor AI-weighted confidence scoring across 4 SMC patterns (Fair Value Gaps, Liquidity Sweeps, Displacement, plus the patterns shown here), with multi-timeframe HTF bias filtering, live news event suppression (FOMC, CPI, NFP), and 4 backtested chart configurations validated via 3-year walk-forward (May 2023 → May 2026). Total combined backtested net: $1.23M, average win rate 90.16%, profit factor 3.49.
If you want the full system, see thefalconai.com — 14-day free trial, transparent methodology, real LLC, real refund policy.
Recommended timeframes
Optimized visualization for the 30-minute chart on MNQ. Also works on 15-minute and 1-hour. The 5-minute and below will produce too many noise signals.
Disclaimer
Educational technology only. Not financial advice. Past pattern formations do NOT guarantee future price behavior. The signals shown here are pattern detections, not trade recommendations. Always apply your own risk management. Use a stop loss. Size positions appropriately. Trading futures involves substantial risk of loss.
Falcon AI is operated by The Marko Family Group LLC (Florida, USA) and is NOT a registered investment adviser, broker-dealer, or NFA member.
Full system at thefalconai.com Indicator
Indicator
Key LevelsWhat it does
It plots your key liquidity reference levels on NQ/ES/YM, all on a New York clock (America/New_York, auto EST/EDT), built for intraday timeframes. Every level is a horizontal line extended right with a right-margin label, so labels stay readable on any timeframe and don't squeeze the price scale.
Levels plotted
Sessions — Asia (18:00–02:29), London (02:30–06:59), NY AM (07:00–11:29). Each plots that session's high and low. They belong to the current trading day; at the close they clear off the chart and move to history.
NY Midnight Open (NYMO) — the 00:00 ET open.
9:30 Open — the cash-open price, now pulled from 30-minute data so it reads correctly on every timeframe (1H and higher included).
Prior Day H/L (PDH/PDL) — the trading day runs 18:00 → 16:59 next day, finalized at the close so it's visible all weekend. Keeps the last 3 days. Swept levels relabel "old" and switch to dashed.
Prior Week H/L (PWH/PWL) — Sunday 18:00 → Friday 16:59. Keeps the last 3 weeks. Same sweep relabel/dash behavior.
Trading-day logic
Everything rolls on the trading day (18:00 boundary, +6h shift), not the calendar day, and the weekend gap is handled so Friday's levels finalize correctly.
Backtesting / history
A "Show current day" toggle plus individual "Show N days back" toggles (1–5) let you bring archived session/anchor days back onto the chart one at a time. With current-day off during market close, the recent day's PD/PW previews now clear too.
Settings
Per-level color inputs (each controls both line and label), show/hide per level, and a global line width. NYMO and 9:30 default to black — recolor those for a dark chart. Indicator
Indicator
Kane's Indices ORBKane's Indices ORB
A clean Opening Range Breakout (ORB) indicator designed specifically for index futures traders.
This indicator automatically plots and extends the key opening ranges used by many professional index traders:
• 8:00am EST 15-Minute ORB
• 9:30am EST 30-Minute ORB
• 9:30am EST 15-Minute ORB
• Optional 6:00pm EST 5-Minute ORB
• Optional 6:00pm EST 15-Minute ORB
Features:
• Session boxes with customizable colors and opacity
• Dashed midpoint levels for each opening range
• Automatic range extension throughout the trading session
• Designed exclusively for index products
• Works with ES, MES, NQ, MNQ, YM, MYM, RTY, and M2K
• Lightweight and uncluttered visual design
The opening range often serves as an important reference for intraday trend direction, support and resistance, liquidity grabs, and breakout opportunities. This indicator keeps those key levels visible throughout the session so traders can focus on price action rather than manually drawing ranges.
Created for traders who want a clean, chart-focused ORB tool without unnecessary complexity.
Indicator
SmartBreak Fibo [TraderHook]SmartBreak Fibo
Stop drawing your setups by hand. SmartBreak watches market structure in real time, and the moment price breaks a structural swing — a BOS (Break of Structure) or CHoCH (Change of Character) — it instantly maps a full Fibonacci trade plan on your chart: entry, stop, and three targets. No manual fib dragging, no guesswork on where to place levels.
How it works
The engine tracks swing highs/lows and detects every structural break (BOS / CHoCH).
On each break, a Fibonacci is anchored from the broken swing (level 1) to the opposing swing (level 0).
Entry is plotted at the 0.618 retracement, Stop-Loss at level 0 (the swing extreme).
Three take-profits sit at fib extensions 2.0 / 2.618 / 3.618 .
A green box shows the profit zone (entry → TP3), a red box shows the risk zone (entry → SL).
Why traders like it
Setups appear the instant structure breaks — you decide whether to take them, the levels are already there.
Long breaks are marked green, short breaks red — direction is readable at a glance.
Fully adjustable: entry level, all three TPs, pivot sensitivity, colors, and how many recent setups stay on screen.
"ChoCh only" mode if you prefer to trade reversals over trend continuations.
Settings
Pivot Period — structure sensitivity (higher = bigger swings only).
Entry / TP1 / TP2 / TP3 — every fib level is yours to tune.
Number of recent setups — keep the chart clean with just the latest, or show history.
Long / Short setups — toggle either side on or off.
Credits
The market-structure engine (ZigZag, swing classification, BOS/CHoCH) is based on the open-source work of TFlab , used under the Mozilla Public License 2.0. The Fibonacci trade-box system is by TraderHook. Published open-source — feel free to study and build on it.
Disclaimer
This is a visualization tool, not financial advice or a signal service. The take-profit levels are mechanical Fibonacci extensions — they do not predict that price will reach any target. Always backtest and manage your own risk before trading. Indicator
Smart Killzones Gold & BTC EditionSmart Killzones — Gold & BTC Edition
OVERVIEW
A clean, open-source session-mapping tool that highlights the four major institutional trading sessions (Asia, London, New York AM, New York PM) and captures each session's High and Low as forward liquidity levels. It is built and calibrated for Gold (XAUUSD) and Bitcoin (BTCUSD), and works on any FX or index pair on intraday timeframes (M1 to H1).
WHY SESSIONS MATTER
The largest moves in Gold and BTC tend to occur during the London/New York overlap (around 13:00-17:00 UTC) and at the Asia -> London handover. Marking each session's High and Low gives you the liquidity pools that price often sweeps before reversing. This tool simply makes those zones visible and objective.
WHAT IT DRAWS
- A colored box for each active session (range from session open to now).
- Auto-extending High/Low liquidity lines for each completed session.
- Optional session-name labels with the range size in points.
- A compact status table showing which session is active and the current symbol.
KEY SETTINGS
- Timezone selector: UTC, Exchange, Broker GMT+2, Broker GMT+3, or Custom.
- Each session: independent on/off, custom time window, and color.
- Visuals: toggle labels, range text, liquidity lines (length and width), table position.
- Weekend Gap Awareness (Gold): optionally hides sessions during the Gold weekend close (Fri 22:00 -> Sun 22:00 UTC). Disable it for crypto, which trades 24/7.
NOT INCLUDED (by design)
- No buy/sell signals.
- No stop-loss / take-profit logic.
- This tool maps context only; it does not tell you when to trade.
HOW TO USE
1. Add to a Gold or BTC chart on an intraday timeframe (M5-M15 recommended).
2. Set the Timezone option to match your broker so the sessions align.
3. Watch how price reacts to prior session High/Low liquidity lines.
4. Use the active-session table to know which session you are trading.
NOTES
- This script is open-source under MPL 2.0; you are free to study and reuse it under the license terms.
- It is a session/liquidity visualization tool, not a strategy.
DISCLAIMER
Educational tool only. Not financial advice. Trading involves risk of capital loss. Past performance does not guarantee future results. Use at your own discretion. Indicator
L&S Intraday Lite H1/M15/M3# L&S Intraday Lite — H1/M15/M3
**Liquidität & Struktur — der Markt bewegt sich nicht wegen Linien. Er bewegt sich wegen Liquidität.**
L&S Intraday ist ein Multi-Timeframe Struktur-Indikator, der auf dem Prinzip basiert: *Preis bewegt sich von Liquidität zu Liquidität.* Statt Muster zu raten, zeigt dir L&S, wo Liquidität liegt, wann sie geholt wird und ob sich die Struktur danach verändert.
---
## Was dieser Indikator zeigt
**🔭 H1 Bias — Wohin will der Markt?**
Automatische Trend-Erkennung auf H1 via Swing-Pivots. Gibt dir den übergeordneten Kontext, bevor du auf M15 nach Struktur suchst.
**📈 M15 Struktur — Was passiert gerade?**
Swing Highs/Lows auf M15, sauber berechnet via native Pivots innerhalb der Security-Funktion — korrekt auf jedem Chart-Timeframe (M1, M3, M5).
**⚡ Sweep-Erkennung — Wo wird Liquidität geholt?**
Erkennt Sweeps gegen M15 Swing-Level: Docht über/unter dem Level + Close davor = Liquidität wurde genommen. Bestätigte Sweeps (HL/LH danach) werden separat markiert.
**🏗️ BOS / CHoCH / MSS — Hat sich die Struktur verändert?**
- **BOS** (Break of Structure): Fortsetzung in Trendrichtung
- **CHoCH** (Change of Character): Erster Bruch gegen den Trend
- **MSS** (Market Structure Shift): Sweep bestätigt + Strukturbruch + HTF-Bias aligned
Jedes Event wird mit einer **Bruch-Linie** vom gebrochenen Pivot bis zur Break-Kerze dargestellt — du siehst exakt, welches Level gebrochen wurde und wo.
**📊 Marktphasen — Ist der Markt überhaupt bereit?**
Erkennt automatisch: Expansion 🚀, Erschöpfung ⚠️ oder Aufbau 🔄 — basierend auf ADX + ATR-Verhältnis. Optionaler Phasen-Hintergrund macht den Zustand sofort sichtbar.
**📏 Key Levels — PWH/PWL & PDH/PDL**
Previous Week High/Low und Previous Day High/Low als gestrichelte Referenz-Linien.
---
## Wie du es nutzt
1. **H1 Bias prüfen** — Bullisch oder Bärisch?
2. **M15 Swing-Level beobachten** — Wo liegt offensichtliche Liquidität?
3. **Auf Sweep warten** — Wird ein Level geholt?
4. **Strukturbruch beobachten** — CHoCH / BOS / MSS nach dem Sweep?
5. **Entscheidung treffen** — Passt der Kontext?
> *Ich trade nicht, weil ich etwas sehe. Ich trade, weil der Markt ein Verhalten zeigt, das Wahrscheinlichkeit erzeugt.*
---
## Technische Details
- **Bias:** H1 (Swing-Pivots, Länge 10)
- **Struktur:** M15 (Swing-Pivots extern + intern, konfigurierbar)
- **Berechnung:** Komplett innerhalb `request.security` auf dem jeweiligen Timeframe — keine Timeframe-Abhängigkeit, kein Repainting auf geschlossenen Kerzen
- **Break-Erkennung:** Level-Vergleich + Crossed-Flag (robust gegen bereits durchbrochene Pivots)
- **Labels:** Zeitbasiert platziert via `xloc.bar_time` auf der echten Event-Kerze
---
## 🔒 L&S Pro
Diese Lite-Version zeigt dir **Struktur bis zum Shift**. Die Pro-Version geht weiter:
- ✅ **Akzeptanz-Filter** — Entscheidet, ob ein Shift tatsächlich handelbar ist
- ✅ **FVG & Order Blocks** — Präzise Entry-Zonen aus dem Impuls
- ✅ **Premium/Discount + OTE** — Dealing Range mit Equilibrium und Optimal Trade Entry
- ✅ **Checkliste + Score** — 6-Punkte-Entscheidungssystem: Trade oder kein Trade
- ✅ **Entry-Trigger** — Der letzte Schritt, den die Lite bewusst nicht zeigt
*Struktur zeigt dir, dass etwas passiert ist. Akzeptanz entscheidet, ob du handeln darfst.*
---
**Einstellungen:** Alle Parameter (Swing-Längen, Sweep-Fenster, Farben, Anzeige-Toggles) sind über die Settings konfigurierbar.
**Timeframes:** Optimiert für M1–M5 Chart-Ansicht. H1 Bias + M15 Struktur werden automatisch berechnet.
**Instrumente:** Funktioniert auf allen Märkten — Indizes, Forex, Krypto, Aktien.
Indicator
Auto TrendLine Intelligence [BOS+CHoCH+FVG] [Rehan Khanani]================================================================
AUTO TRENDLINE INTELLIGENCE
================================================================
Auto TrendLine Intelligence is a professional-grade, institutional-level technical analysis indicator built for traders who think and operate like smart money. It combines automatic trend line detection with full Smart Money Concepts — BOS, CHoCH, and FVG — into one clean, powerful overlay.
This is not just a trend line tool. It is a complete market structure analysis system that tells you what the market is doing, why it is doing it and exactly where to enter, exit, and place your stop-loss.
================================================================
HOW IT WORKS
================================================================
The indicator runs five analytical engines simultaneously on every bar:
ENGINE 1 — AUTOMATIC TREND LINE DETECTION
The indicator automatically detects the most recent swing highs and swing lows using a pivot-based algorithm, then draws two types of trend lines in real time without any manual input:
Major Trend Lines (solid): Connect significant swing highs and swing lows using the full pivot lookback length. These represent the dominant structural trend and carry the highest weight for trading decisions.
Minor Trend Lines (dashed): Connect shorter-term pivots using a reduced lookback period. These represent intraday or near-term structure and are useful for precise entry timing.
Both lines update automatically as new pivots form. No manual drawing, no redrawing, no guesswork.
ENGINE 2 — BREAK OF STRUCTURE (BOS)
A Break of Structure is a continuation signal. It occurs when price convincingly breaks above a previous swing high (bullish BOS) or below a previous swing low (bearish BOS), confirming that the current trend is likely to continue.
Bullish BOS: price closes above the last confirmed swing high — signals trend continuation to the upside.
Bearish BOS: price closes below the last confirmed swing low — signals
trend continuation to the downside.
BOS labels appear directly on the chart at the point of the break.
ENGINE 3 — CHANGE OF CHARACTER (CHoCH)
A Change of Character is a reversal signal — the first indication that the current trend may be ending and a new one beginning. It is the most important signal in Smart Money analysis.
Bullish CHoCH: in a confirmed downtrend (lower highs, lower lows), price breaks above a recent lower high for the first time — this signals a potential reversal to the upside.
Bearish CHoCH: in a confirmed uptrend (higher highs, higher lows), price breaks below a recent higher low for the first time — this signals a potential reversal to the downside.
CHoCH labels are clearly marked on the chart and distinguished from BOS.
ENGINE 4 — FAIR VALUE GAP (FVG)
Fair Value Gaps are imbalance zones left behind by aggressive institutional buying or selling. Price frequently returns to these zones to rebalance before continuing in the original direction.
Bullish FVG: a gap between the high of the candle two bars ago and the low of the current candle — shown as a teal shaded zone.
Bearish FVG: a gap between the low of the candle two bars ago and the high of the current candle — shown as a red shaded zone.
FVG boxes automatically disappear when price returns to fill the gap (mitigation), keeping the chart clean at all times.
ENGINE 5 — LIQUIDITY ZONES
Equal highs and equal lows represent areas where institutional stop orders and limit orders are clustered. The indicator detects when two recent pivot highs or lows are at approximately the same price level and marks them with a dotted yellow line — highlighting where liquidity is likely to be swept before a major move.
================================================================
ENTRY SIGNAL SYSTEM (MULTI-FILTER CONFLUENCE)
================================================================
LONG and SHORT entry signals are generated only when ALL of the following conditions align simultaneously — ensuring institutional-grade signal quality:
For a LONG signal:
1. Price touches or approaches the support trend line within ATR buffer
2. Price is above the EMA 200 (bullish market bias confirmed)
3. RSI is not in overbought territory (momentum not exhausted)
4. Volume is above the 20-period average (institutional participation)
5. Candle closes bullish (price accepts support level)
For a SHORT signal:
1. Price touches or approaches the resistance trend line within ATR buffer
2. Price is below the EMA 200 (bearish market bias confirmed)
3. RSI is not in oversold territory (momentum not exhausted)
4. Volume is above the 20-period average (institutional participation)
5. Candle closes bearish (price rejects resistance level)
This five-layer confluence model ensures you only take trades where structure, trend, momentum, and volume all agree.
================================================================
AUTOMATIC TP1 / TP2 / SL LEVELS
================================================================
Every entry signal automatically plots:
Stop Loss: placed below/above the entry using ATR multiplier (default 1.5x ATR)
Take Profit 1 (TP1): at 50% of the full RR target — for partial exits
Take Profit 2 (TP2): at full Risk:Reward ratio target (default 2:1 RR)
All three levels are drawn as dashed lines directly on the chart with
exact price labels so you never have to calculate manually.
================================================================
INSTITUTIONAL DASHBOARD — 12 DATA POINTS
================================================================
A professional real-time dashboard is displayed in the corner of your
chart showing:
1. Market Bias — BULLISH or BEARISH based on EMA 200 position
2. Market Structure — Higher Highs/Lows | Lower Highs/Lows | Consolidation
3. EMA Stack — Bullish Stack | Bearish Stack | Mixed
4. RSI Reading — Exact value + zone (Overbought / Oversold / Neutral)
5. Volume Status — High Volume | Above Average | Below Average
6. ATR Value — Current ATR for volatility awareness
7. Support TL — Projected support trend line price at current bar
8. Resistance TL — Projected resistance trend line price at current bar
9. Fair Value Gap — Bullish FVG | Bearish FVG | None
10. SMC Event — Latest BOS or CHoCH event detected
11. Signal Status — LONG ENTRY | SHORT ENTRY | WATCHING
Dashboard position is fully adjustable: Top Right, Top Left, Bottom Right, or Bottom Left.
================================================================
FULL FEATURE LIST
================================================================
Automatic Features (Zero Manual Work Required):
- Auto major trend lines from pivot highs and lows
- Auto minor trend lines from shorter-term pivots
- Auto BOS detection and labeling
- Auto CHoCH detection and labeling
- Auto FVG zone drawing and auto-removal on mitigation
- Auto liquidity zone detection (equal highs / equal lows)
- Auto TP1, TP2, SL calculation and plotting on every signal
- Auto dashboard with 11 live market readings
Filters and Controls:
- EMA 200 trend direction filter
- EMA 50 for stack analysis
- RSI momentum filter (adjustable OB/OS levels)
- Volume spike filter (adjustable multiplier)
- ATR-based signal sensitivity buffer
- All filters individually toggleable
Visual Controls:
- Major and minor trend line toggle
- Individual color pickers for all line types
- Line width control (1 to 5)
- Extend lines right toggle
- FVG transparency control
- Dashboard position selector
Alert Conditions (9 Total):
1. LONG Entry Signal
2. SHORT Entry Signal
3. Any Entry Signal
4. Bullish BOS
5. Bearish BOS
6. Bullish CHoCH
7. Bearish CHoCH
8. Bullish FVG detected
9. Bearish FVG detected
================================================================
SETTINGS GUIDE
================================================================
Group 1 — Trend Line Settings
Pivot Lookback Length: Controls how significant a swing must be to form a trend line. Default is 10. Lower values (5-7) give more frequent lines suitable for scalping. Higher values (15-20) give fewer but stronger structural lines suitable for swing and position trading.
Show Major Trend Lines: Toggle the primary solid trend lines on/off.
Show Minor Trend Lines: Toggle the secondary dashed trend lines on/off.
Extend Lines Right: Extends all lines to the right edge of the chart.
Major Line Width: Visual thickness of major trend lines (1 to 5).
Color pickers: Customize all four line types independently.
Group 2 — Smart Money Concepts
Show BOS: Toggle Break of Structure labels on/off.
Show CHoCH: Toggle Change of Character labels on/off.
Show FVG: Toggle Fair Value Gap boxes on/off.
Show Liquidity Zones: Toggle equal high/low dotted lines on/off.
FVG Transparency: Adjust how opaque or subtle the FVG boxes appear.
Group 3 — Signal and Entry Settings
ATR Length: Period for ATR calculation (default 14).
ATR Buffer Multiplier: How close price must come to the trend line to
trigger a signal. Lower = stricter, higher = more relaxed.
Stop Loss ATR Multiplier: Distance of SL from entry in ATR units.
Risk Reward Ratio: Multiplier applied to the SL distance to set TP2.
Show TP/SL on Chart: Toggle the TP1, TP2, SL lines on/off.
Group 4 — Volume and Momentum Filter
Enable Volume Filter: When on, signals only fire on above-average volume.
Volume Spike Multiplier: Threshold multiplier over 20-period volume MA.
Enable RSI Filter: When on, blocks signals in exhausted momentum zones.
RSI Length, Overbought, Oversold: Standard RSI parameters.
Group 5 — Dashboard
Show Dashboard: Toggle the entire dashboard panel on/off.
Dashboard Position: Place it in any corner of the chart.
================================================================
HOW TO USE — STEP BY STEP
================================================================
Step 1 — Check the Dashboard
Before looking at any signal, check the dashboard. Confirm Market Bias, Structure, and EMA Stack all point in the same direction. Trade only when at least two of the three agree.
Step 2 — Identify the Trend Lines
Watch where the major trend lines are relative to current price. The support line (teal/blue) and resistance line (red) define your trading range and structural boundaries.
Step 3 — Wait for SMC Confluence
Before entering on a trend line touch, check whether a CHoCH has recently occurred in your direction. A CHoCH near a trend line is one of the highest-probability setups this indicator generates.
Step 4 — Watch for FVG Zones
If a Fair Value Gap is present near the trend line, this adds further confluence. Institutional traders frequently use FVG zones as entry triggers.
Step 5 — Enter on Signal
When a LONG or SHORT label appears, all five filters have aligned. Enter at the close of the signal candle. Your TP1, TP2, and SL levels will appear automatically on the chart.
Step 6 — Manage the Trade
Consider taking partial profits at TP1 (50% of position) and letting the remainder run to TP2. Move stop loss to breakeven after TP1 is hit.
Step 7 — Set Alerts
Use the 9 built-in alert conditions to be notified of signals and SMC events without watching the chart constantly.
================================================================
RECOMMENDED TIMEFRAMES
================================================================
Scalping: 1 minute, 5 minutes (Pivot Length 5-7)
Intraday: 15 minutes, 30 minutes, 1 Hour (Pivot Length 8-10)
Swing Trading: 4 Hour, Daily (Pivot Length 10-15)
Position Trading: Weekly (Pivot Length 15-20)
The indicator automatically adapts to any timeframe. Only the Pivot Lookback Length needs to be adjusted based on your trading style.
================================================================
COMPATIBLE MARKETS
================================================================
This indicator works on all liquid markets available on PulseWire:
Forex: All major, minor, and exotic currency pairs
Crypto: Bitcoin, Ethereum, and all altcoins
Commodities: Gold (XAUUSD), Silver (XAGUSD), Oil (WTI, Brent)
Indices: S&P 500, NASDAQ, Dow Jones, FTSE, DAX, Nikkei
Stocks: Any individual equity with sufficient volume
Futures: All futures contracts available on PulseWire
================================================================
WHO CAN USE THIS INDICATOR
================================================================
Beginner Traders:
The dashboard and automatic signals remove the need for manual analysis. Beginners can use the LONG and SHORT labels as guided entry points while learning how the underlying concepts work.
Intermediate Traders:
Use the BOS and CHoCH labels to understand market structure shifts and combine them with trend line touches for high-confluence entries. The FVG zones add an additional layer for precise entry timing.
Advanced and Professional Traders:
Use the full system as an institutional-grade market structure scanner. Combine BOS, CHoCH, FVG, and liquidity zones with your own HTF bias for a complete multi-confluence trading framework. The volume and RSI filters can be tuned precisely to your strategy requirements.
Algorithmic and Systematic Traders:
All 9 alert conditions can be connected to PulseWire webhooks for automated notification systems or strategy integration.
Portfolio Managers and Analysts:
The dashboard provides a rapid one-glance market assessment across any asset — useful for screening multiple instruments quickly.
================================================================
IMPORTANT DISCLAIMER
================================================================
Auto TrendLine Intelligence is a technical analysis tool designed to support trading decisions. It does not guarantee future results. All trading involves risk. Always apply proper risk management, use appropriate position sizing, and conduct your own due diligence before entering any trade. Past signal performance is not indicative of future results. This indicator is not financial advice. Indicator
ORB VWAP EMA Framework for MES and U.S. InstrumentsThe ORB VWAP EMA Framework for MES and U.S. Instruments is an intraday chart-analysis indicator designed to support a structured Opening Range Breakout workflow across Micro E-mini S&P 500 futures and other U.S. market instruments that respond to the New York regular session open. It plots VWAP, 4 EMA, 9 EMA, Previous Day High/Low, Overnight High/Low, and the 15-minute Regular Trading Hours Opening Range, with optional range shading for added visual context. The script also identifies breakout, retest, and confirmation events to help standardize market review and rule-based intraday analysis. Individual label groups can be enabled or disabled in settings to suit different chart preferences and levels of visual detail. Although optimized for MES, the framework can also be applied to other U.S. index futures, stocks, and ETFs where the New York session open and opening range behavior are relevant. This indicator is intended as a decision-support and market-structure visualization tool for disciplined analysis and testing, and does not represent any claim of profitability or predictive performance.
How to use
Apply the indicator to an intraday chart, commonly a 5-minute chart, and use the plotted Opening Range, VWAP, EMA structure, and key session reference levels to evaluate price behavior during Regular Trading Hours. The framework is optimized for MES but can also be used on other U.S. index futures, stocks, and ETFs where the New York session open is a meaningful source of intraday price discovery. Breakout, retest, and confirmation labels can be used to organize chart review and assess whether price is interacting with the Opening Range in alignment with broader directional structure. Label visibility controls in settings allow the display to be adjusted for different workflows and levels of chart detail. Indicator
Indicator
Strategy
Indicator
Indicator
Micro Pivot
Short description:
A structure-based intraday framework that highlights small pivot points where price may be transitioning from continuation to rejection, or from pullback to renewed directional control.
Full description:
The TM Micro Pivot Framework is a research and validation tool for studying short-term market structure. It is designed to help traders identify compact swing points, local support/resistance reactions, and potential continuation or rejection zones on intraday charts.
This concept focuses on micro pivots: small but meaningful inflection areas that can appear before larger directional moves. Rather than treating every minor swing as important, the framework is intended to organize price action around repeatable structure: prior swing highs/lows, reaction zones, trend context, volatility, and invalidation levels.
Core use cases:
- Identify local intraday pivot highs and pivot lows.
- Mark potential reaction zones where price may pause, reject, or continue.
- Study pullback behavior inside a larger trend context.
- Compare aggressive early structure signals against more conservative confirmation signals.
- Support forward testing and strategy research before any live execution decision.
How to read it:
A bullish micro pivot area may form when price creates a local low, holds above a prior reaction zone, and begins to reclaim short-term structure. A bearish micro pivot area may form when price creates a local high, rejects a prior reaction zone, and begins to lose short-term structure.
Signals and plots are not trade recommendations. They are visual research markers intended to help traders study whether specific structure conditions are present.
Suggested validation workflow:
1. Start with the higher-timeframe trend and key levels.
2. Use the micro pivot markers to identify local structure changes.
3. Define invalidation before considering any setup.
4. Forward test the behavior in a controlled environment.
5. Review results over a meaningful sample before making execution decisions.
Important notes:
- This tool does not predict market direction.
- This tool does not guarantee profitable trades.
- This tool should not be used as a standalone trading system.
- Market conditions, liquidity, volatility, news, and execution quality can materially affect outcomes.
- Any strategy based on this concept should be tested and validated before use.
Risk disclaimer:
Trading futures, stocks, options, forex, crypto, and other financial instruments involves substantial risk and may not be suitable for all traders. Past performance is not indicative of future results. This script is provided for educational and research purposes only and should not be considered financial advice, investment advice, or a recommendation to buy or sell any instrument. Traders are responsible for their own decisions, risk management, and compliance with applicable rules and regulations.
Publication note:
This description is written for PulseWire educational/research presentation. It avoids performance claims, guaranteed outcomes, financial advice, and unverifiable profitability language.
Indicator
Trailing Fibonacci + Golden Zone█ OVERVIEW
Trailing Fibonacci + Golden Zone is a dynamic Fibonacci-based indicator designed for automated analysis of market structure, trend direction, and corrective zones using trailing swing highs and lows combined with pivot-based market structure logic.
Unlike classic Fibonacci tools drawn manually between two selected points, this indicator continuously updates the active market range as new price extremes appear.
As a result, Fibonacci levels automatically adapt to current market structure, enabling real-time analysis of corrections, impulses, and dominant directional movement.
The indicator combines three main components:
• trailing Fibonacci structure
• adaptive Golden Zone model
• breakout and retest/exit signal system
Additionally, the indicator can be used as a standalone trend tool, visualizing market direction through range expansion and price reactions within the Golden Zone.
█ CONCEPTS
Trailing Range Logic
The indicator builds its active range using:
• trailing highs and trailing lows (dynamic mode)
• pivot-based structure (alternative measurement mode)
The side that is not currently in trailing mode updates its structure using pivot points. The minimum pivot length for a valid structure is 10, which helps filter market noise and stabilize swing structure.
Increasing pivot length results in:
• a wider, more macro-level structure
• analysis focused on larger impulses
• more trend-oriented behavior
Decreasing pivot length results in:
• more localized structure
• faster reaction to price changes
This allows users to adapt market scale to their trading style.
Dynamic Fibonacci Structure
• new highs extend the bullish range
• new lows extend the bearish range
• Fibonacci levels automatically adapt to structure changes
• the entire framework behaves like a living swing structure
Dynamic Zero Level Orientation
The zero level is always assigned to the most recent range anchor (latest extreme).
Each new high or low can shift the base of the measurement range, dynamically repositioning the entire Fibonacci structure.
Golden Zone Model
The Golden Zone represents the key corrective area between 0.618 and 0.786, acting as a dynamic price reaction zone.
• serves as a market reaction area
• acts as dynamic support/resistance
• changes color depending on market structure
• adapts to the current range
Trend Logic (Golden Zone)
• trend shifts when price breaks the Golden Zone
• breakout defines a change in market dominance
• price staying inside the zone represents consolidation
• return to the zone may indicate structural retest
Signal System
Breakout Signals
• triggered when price breaks the Golden Zone
• indicate structural change in the market
• mark the start of a new impulse phase
Retest / Exit Signals
• appear after price returns and exits the zone
• confirm continuation of the move
█ FEATURES
INPUTS / SETTINGS
Main Settings
• Pivot Length
→ defines swing structure size
→ minimum value: 10
→ lower values = more local structure
→ higher values = broader, trend-based structure
• Show Fib Labels
→ toggles Fibonacci level labels
• Fib Right Offset
→ shifts Fibonacci levels to the right
• Fib Labels Y Offset (%)
→ vertical label positioning adjustment
• Fib Line Width
→ controls Fibonacci line thickness
Golden Zone Settings
• Enable Golden Zone
→ enables/disables the zone
• Upper Ratio (0.618)
• Lower Ratio (0.786)
Signal Settings
• Signal Type (Breakout / Retest / Both)
→ selects signal type
• Signal Size (Tiny / Small / Normal)
→ visual signal size
Color Settings
• Fib Lines Color
• Fib Labels Text Color
• Golden Zone Bullish Color
• Golden Zone Bearish Color
Fibonacci Levels
• enable/disable individual levels
• ratio customization
• full Fibonacci grid configuration
█ APPLICATIONS
1. Market Structure Mapping
The indicator automatically visualizes market structure without manual swing drawing.
It allows users to observe:
• market expansion phases
• corrections and retracements
• key price reaction zones
The Golden Zone range can also be adjusted to individual preferences, allowing multi-layered market analysis across different scales.
2. Confluence-Based Trading (Corrections & Continuations)
Signals should always be evaluated together with additional context:
• momentum strength (does the move have power)
• resistance above LONG signals
• alignment with higher timeframe trend
• volume confirmation (activity at signal zone)
• overlap of Golden Zone with high-volume areas
The strongest setups occur when multiple confluence factors align in the same direction.
3. Trend Mode Usage (Trend Filter)
The indicator can be used as a trend filter by:
• increasing Pivot Length
• filtering signals according to overall market direction
• ignoring lower-timeframe noise and corrections
In this mode, it functions as a directional bias tool for other trading systems.
█ NOTES
The indicator should be used only as a supportive tool for confirmation alongside other indicators or trading methods. Indicator
ICT/SMC Institutional Intelligence -- Dual Detection [IID]ICT/SMC Institutional Intelligence — Dual Detection
An integrated ICT/SMC structural analysis system built around two independent verdict engines — Continuation and Reversal — that score the same market in parallel and surface what the price action is doing, where the market structure stands, and whether continuation or reversal pressure is building. The system describes conditions. It does not issue buy or sell instructions.
---
█ What Makes It Different
Dual independent verdict engines.
Continuation and Reversal score simultaneously, against the same chart, with configurable conflict resolution — Show Both , Dominant Wins , or CONFLICT Flag — so traders see when both pressures are real, when one is dominant, and when the two are fighting.
-
Multi-factor confluence engine across three categories.
A composite confluence score grouped into Zone , Reference , and Timing buckets, so traders can see what kind of confluence is present, not just how much.
-
Real-time Intelligence Briefing.
A three-column briefing — STATE / OBSERVED / TRACKING — that translates the engine readings into plain structural language and tracks live events like pending sweep confirmations as they unfold.
---
█ Key Capabilities
The system includes BUT NOT LIMITED TOO:
Dual verdict engines
(Continuation and Reversal) scoring INACTIVE → EARLY → FORMING → BUILDING → CONFIRMED, with timeframe-aware multipliers and modifier handling for consolidation, lunch dead-zone, NY overlap, and active sweeps.
-
Structure detection
including Break of Structure ( BOS ), Change of Character ( CHoCH ), and Market Structure Shift ( MSS ) across configurable timeframes, with validation-event freshness gating.
-
Zone management
for Order Blocks (OB) , Fair Value Gaps (FVG) , Breaker Blocks (BB) , Balanced Price Range (BPR) , and Inverted FVG (iFVG) — each treated as dynamic support and resistance with full lifecycle tracking (formation, mitigation, inversion, aging, pruning).
-
Liquidity tracking
including liquidity pool detection, liquidity sweep identification, and a sweep-reclaim confirmation-window finite-state machine that distinguishes a wick raid from a confirmed reclaim with follow-through.
-
Multi-factor confluence scoring
across Zone , Reference , and Timing categories, with configurable STRONG / STANDARD / WEAK tier thresholds.
-
Five structural phases —
Expansion, Pullback, Consolidation, Continuation, Reversal — classified at chart-timeframe speed, each with its own optional alert.
-
Multi-timeframe market-structure grid
showing structure, swing position, zone presence, and trend per row. Rows hidden from the dashboard still compute for scoring.
-
Premium / Discount labelling and Optimal Trade Entry (OTE) zone detection (21–38% discount, 62–79% premium) from the active swing range.
-
Kill-zone awareness
for Asian, London, NY AM, and NY PM sessions, with a lunch dead-zone modifier and asset-class-aware gating.
-
Three-EMA trend system and anchored VWAP (Daily / Weekly / Session / Monday anchors) with previous-anchor reference.
-
Session reference levels
including previous-day high, previous-day low, and midnight open.
-
Impulse classification
with displacement and absorption recognition, volume-climax exhaustion detection (opt-in), and an order-flow bias layer.
-
SMT divergence
against up to two correlated tickers, with configurable inverse-correlation logic.
-
Intelligence Briefing
delivering STATE / OBSERVED / TRACKING context on every confirmed bar.
-
Comprehensive alert system
with alert conditions across three categories, individually toggleable, gated by bar close.
-
Multi-asset support
with asset-class-aware behaviour for forex, crypto, equity-like instruments, and other classes.
! (dashboard-overview.png)
(Screenshot: Full IID Dual dashboard on BTCUSDT during a Pullback phase — Market State verdict band, three-column Intelligence Briefing, multi-timeframe market structure grid, VWAP anchoring, confluence scoring, chart-timeframe intelligence, and Market Context with MAG / IMP / LIQ / BIAS)
---
█ Who It's For
Whether you follow ICT methodology , trade Smart Money Concepts (SMC) setups, or work in pure price action analysis, IID Dual is built to give you structural context without prescribing entries. It is designed for traders who want to read the market, not be told what to do — practitioners who already have an entry framework and want a measured, transparent map of the conditions around their setup.
---
█ How It Works — The System
The system reads the chart in layers: structural events, zone behaviour, liquidity dynamics, confluence, and live tracking — all feeding two parallel verdict engines that score the picture in tandem. The architecture is integrative, not modular-in-isolation. Each layer feeds the next:
Structure detection runs first. Manual pivot logic with an ATR filter generates swing highs and lows, which produce BOS, CHoCH, and MSS validation events. These events have freshness windows — stale structure does not count toward the verdict.
Zone management tracks every reactive level the structure produces. Order Blocks, Fair Value Gaps, Breaker Blocks, BPRs, and inverted FVGs are created, aged, tested, mitigated, and pruned. The system knows which zones are active, which have been touched, and which have inverted.
Liquidity tracking maintains equal-high and equal-low pools and watches for sweeps. When a sweep occurs, a confirmation-window finite-state machine arms, then progresses through reclaim and follow-through — distinguishing a real institutional rotation from a stop-hunt that fails to confirm.
The Intelligence Briefing surfaces what matters from this stream in plain language: what state the system reads, what structural evidence supports it, and what live events are being tracked right now.
The confluence engine measures alignment by counting the active factors across Zone, Reference, and Timing categories, then classifying the percentage into STRONG, STANDARD, or WEAK tiers.
Both verdict engines score this picture in parallel. The Continuation engine combines higher-timeframe bias, confluence, kill-zone alignment, impulse, liquidity-path clearance, volume, and structural bonuses.
The Reversal engine requires hard gates — fresh CHoCH/MSS/BB-retest against bias, plus a prior validated sweep — before it allows a score, then composes its tier from validation age, sweep quality, confluence, impulse, volume, FVG, equal-highs/lows, kill-zone, and SMT divergence.
Conflict routing decides what the trader sees when both engines are active: both sides displayed, the configured dominant engine wins, or an explicit CONFLICT flag is raised.
The trader decides.
! (engine-continuation-breakdown.png)
(Screenshot: Continuation engine on EUR/USD 15M during a bullish trending move — FORMING ▲ BULL 54%, with full component breakdown visible: BIAS 1 + CON 16 + KZ 5 + IMP 6 + LIQ 0 + B8 = 54%, driven by CON; Reversal independently inactive)
! (engine-reversal-breakdown.png)
(Screenshot: Reversal engine on US30 15M after a confirmed CHoCH event — CONFIRMED ▼ BEAR 74%, with full component breakdown visible: VAL 25 + SWP 20 + CON 8 + IMP 7 + KZ 0 + E5 = 74% (CHoCH); Continuation independently EARLY ▲ BULL 22%)
---
█ The Dashboard
The dashboard is a structured top-to-bottom readout, with seven bands designed to be read in order:
Market State
(top) — both engine tiers and percentages plus the central market-state classification
Intelligence Briefing —
STATE / OBSERVED / TRACKING in three cards
Multi-timeframe structure grid —
one row per configured timeframe with TF, swing position, structure pattern, OB up/down, BB, FVG, and trend
VWAP row —
current anchor distance and previous anchor reference
Confluence —
tier summary plus factor breakdown by Zone, Reference, and Timing
Chart Timeframe Intelligence —
volume, swing percentile, volatility, session, and kill-zone status
Market Context —
MAG (nearest magnet), IMP (impulse history), LIQ (sweep status), and BIAS (multi-timeframe consensus)
Every row is individually toggleable. The dashboard position and background opacity are configurable. Critically, structure grid rows hidden from view still compute for scoring — traders can simplify what they look at without losing analytical depth.
! (dashboard-annotated-walkthrough.png)
(Screenshot: Annotated walkthrough of every dashboard band — Market State, Intelligence Briefing, multi-timeframe Structure Grid, VWAP, Confluence, Chart Timeframe Intelligence, and Market Context — each labelled in reading order)
! (structure-grid-closeup.png)
(Screenshot: Per-timeframe structure grid showing one row per configured timeframe with swing position, structure pattern, order block and FVG presence, breaker blocks, and trend — multi-timeframe discount and sweep alignment visible vertically down the columns)
---
█ The Intelligence Briefing
No other ICT/SMC indicator delivers this layer — a three-column briefing that translates the engine readings into plain structural language, telling the trader what the system reads, what evidence it sees, and what events it's tracking right now.
STATE classifies the current market condition —
Continuation phase, Reversal phase, Consolidation, Expansion, Pullback, or DUAL STAND-DOWN when neither engine is sufficiently active — and identifies which engine is dominant when both are scoring.
OBSERVED
describes the structural evidence the system has registered around the current state, expressed in ICT/SMC vocabulary rather than raw values.
TRACKING
is the live monitor. When a liquidity sweep arms the confirmation window, TRACKING shows the pending event, the countdown to the confirmation deadline, and the active kill-zone context. When no event is pending, it shows the directional narrative or stays quiet — silence is information too.
The briefing updates on the last confirmed bar so traders read a stable, non-flickering snapshot of what the system understands about this moment in the chart.
! (intelligence-briefing-closeup.png)
(Screenshot: Intelligence Briefing close-up — STATE classifies the current market reading, OBSERVED describes the structural evidence in ICT/SMC vocabulary, TRACKING reports live events including pending sweep confirmations and active kill-zone context)
---
█ Setup & Configuration
The defaults work out of the box, but a few inputs are worth knowing about — they determine which timeframes the indicator reads from, how its multi-TF grid is structured, and how patient the indicator is when classifying impulse and structure. The three subsections below cover each in turn. All three are independent — changing one does not change the others.
█ Context & Validation Timeframes
The indicator's primary anchor points are two timeframe inputs. Context timeframe (bias) sets the higher TF the indicator reads bias from. Validation timeframe (confirmation) sets the TF where structural events (BOS, CHoCH, MSS) need to confirm before the engines treat them as valid.
The defaults are 1 hour Context and 15 minutes Validation. These match a Day Trader's typical workflow — a higher-TF bias view paired with a lower-TF confirmation window. Scalpers will usually want lower values for both (15m Context / 1m Validation is common). Swing traders running H4 or daily charts will want higher values (4h Context / 1h Validation, or higher).
The two inputs work together but are independent. Changing Context doesn't change Validation; changing either doesn't affect the Trader Type setting or the Structure Grid configuration. Pick the pair that matches the structural read you actually trade — the indicator does the rest.
! (setup-context-validation.png)
(Screenshot: Properties → Inputs → Timeframes — Context timeframe (bias) and Validation timeframe (confirmation) at their defaults of 1 hour / 15 minutes)
█ Structure Grid Configuration
The 7-Timeframe Market Structure Grid is fully customisable. Each of the seven rows has two settings: a timeframe selector (any TF from 1-minute to monthly) and a Show toggle.
The default ladder is Weekly, Daily, 4-hour, 1-hour, 15-minute, 5-minute, 1-minute — covering the most common trading horizons from high-timeframe context down to execution. Any row can be reassigned to a different TF, and rows can be enabled or disabled individually using their Show checkboxes. A trader running a non-standard ladder (e.g., only the four TFs they actually trade) can hide the rest.
Hidden rows still compute for scoring. This is important — the indicator's engines, BIAS aggregation, and confluence logic read from all seven configured rows regardless of which are visible. Hiding a row removes it from the dashboard display, not from the analysis. Customise the visible ladder to match what you want to see ; the indicator continues to use the full 7-TF data for its decisions.
! (setup-structure-grid.png)
(Screenshot: Properties → Inputs → Timeframes — the seven Structure row dropdowns at their defaults (Weekly → 1-minute ladder), each with an individual Show checkbox; in this view, only the 15-minute row is set to Show)
█ Trader Type
Trader Type is a single dropdown with three values: Scalper, Day Trader (default), and Swing. It controls how patient the indicator is.
The setting doesn't change which timeframes the indicator reads. What it changes is the sensitivity applied to that data. Scalper reacts faster: smaller candle bodies count as meaningful, shorter consolidations register, recent structural events qualify as fresh. Swing waits longer: bodies need to be more decisive, consolidations more developed, events more recent. Day Trader sits between them.
The effect shows up in several places — IMP row candle classifications in Market Context, TREND column readings in the Structure Grid, the Structural Phase header in the Verdict Banner, and delivery-state consolidation detection. The same chart and timeframes will produce different engine reads under different Trader Types because the indicator is asking different questions about the same data.
Pick Trader Type to match your trading style — how long you typically hold trades and how patient you are waiting for setups — not the chart timeframe you happen to be viewing. A scalper running a 1-minute chart will likely want Scalper; a swing trader on H4 will likely want Swing. But the mapping isn't enforced — Trader Type just tells the indicator how strict to be.
Trader Type and the timeframe inputs are independent. Selecting a different Trader Type does not change your Context or Validation Timeframe values. For a complete style-switch, change all three together.
! (setup-trader-type.png)
(Screenshot: Properties → Inputs → Trader Profile — the Trader type dropdown open, showing Scalper, Day Trader (default, highlighted), and Swing)
---
█ Reading the Indicator on a Live Chart
The dashboard mockups above show what each section looks like. The four worked examples below show what each section does — captured from real PulseWire replay sessions, with the indicator running on price as it would in normal use. Each scenario teaches one state the system can be in.
Conditions Ripening — system naming the pre-confirmation state
! (scenario-conditions-ripening.png)
(Screenshot: XAUUSD 5M during live replay — displacement and impulse are building; the system reports the setup before any signal fires)
(Dashboard view: Verdict Banner + Market Context. Other sections hidden.)
Most indicators are silent until conditions confirm, then they fire. IID Dual reports the state before the signal: when displacement and impulse start building a directional case, the Market State band names it explicitly as CONDITIONS RIPENING · FORMING · PRE-PHASE. The system isn't predicting; it's describing what it sees, with timestamps.
Underneath, the impulse layer doesn't just report a single reading — it shows the progression : HLLW → WEAK → SLID → NOW: STRG ↓ at 138% volume, momentum present. Four stages, each named, each timestamped.
The displacement isn't a wick; the case is building. If the next bars deliver continuation, the engine will progress from FORMING to BUILDING to CONFIRMED. If the move stalls, the ripening narrative dissolves and the system moves on.
█ TRACKING in Action — sweep confirmation window
! (scenario-tracking-in-action.png)
(Screenshot: XAUUSD 5M during live replay — a chart sweep arms the confirmation window; the system reads the event and counts down)
(Dashboard view: Verdict Banner + Intelligence Briefing + Pending Strip. Other sections hidden.)
A sweep alone isn't a reversal — it's a question. When price takes out a swing high or low and the confirmation window arms, the dashboard surfaces the pending event explicitly — here a bear sweep at 4762.905, 4 of 5 bars remaining — and the TRACKING column counts down bar by bar so the trader knows whether they're watching a confirmed reclaim or a failed raid. Above, the verdict banner shows Reversal already reading EARLY ▼ BEAR 81% — the engines have priced the structural case; the pending sweep is the live evidence that confirms or invalidates it.
The dashboard isn't predicting; it's reading the chart in real time and reporting what it sees. If the bar closes back inside the original range before the counter expires, the sweep is confirmed and the structural-reversal case strengthens. If the window expires without a clean close, the raid failed and the system moves on.
█ Divergent Signals — both engines speaking at once
! (scenario-divergent-signals.png)
(Screenshot: XAUUSD 5M during live replay — both engines scoring the same chart: Continuation FORMING bear, Reversal BUILDING bull — the system flags the divergence explicitly)
(Dashboard view: Verdict Banner + Intelligence Briefing. Other sections hidden.)
Most indicators force a single directional read. IID Dual lets both engines speak. When a fresh MSS on chart arms the reversal case but the prior continuation hasn't fully invalidated, the dashboard shows both engines scoring at once — here Continuation FORMING ▼ BEAR 22% alongside Reversal BUILDING ▲ BULL 55%, with the Market State band reporting "DIVERGENT SIGNALS · OPPOSED · ENGINES SPLIT" and the sub-line stating "engines disagree . wait for resolution before acting." The STATE column in the Intelligence Briefing reinforces with "DIVERGENT SIGNALS ⚠ Conflict."
The system isn't choosing for the trader; it's reporting what it sees, in detail. If the trader has configured Dominant Wins , the higher-tier engine (here Reversal at 55%) takes the displayed read. If Show Both or CONFLICT Flag is set, the dashboard surfaces the disagreement rather than resolving it — leaving the read to the trader's judgement.
█ Confluence Breakdown — what KIND of confluence is active
! (scenario-confluence-breakdown.png)
(Screenshot: XAUUSD 5M during live replay — multiple timing factors firing while zone and reference categories sit partial; the dashboard splits the confluence score into its three constituent buckets)
(Dashboard view: Verdict Banner + Confluence row. Other sections hidden.)
Confluence usually arrives as a single number. IID Dual splits it. The CONFLUENCE row reports the headline — here 6/15 STANDARD mixed — but the three category lines beneath name exactly what kind of confluence is active: ZONE 2/7 , REFERENCE 0/4 inactive , TIMING 4/4 .
Read those three lines and the same 6/15 score tells a much sharper story. TIMING is fully saturated — every timing factor the system tracks is firing. ZONE is partial — a sweep and a premium/discount read, but no order block or FVG contribution.
REFERENCE is silent — no EMA or VWAP alignment in play. A trader who relies on EMA structure now knows their preferred confluence layer isn't contributing; a trader who weighs timing knows the timing-side case is as strong as it gets. The headline number is honest; the breakdown is where the read lives.
---
█ Component Reference
The four worked examples above teach what the system does in different market states. The nine entries below cover what each component shows , in isolation — each captured with only that component visible, so its structure and tooltips can be read without competition. The Properties panels in each image are the recipe; replicate any view by setting the same toggles.
█ Chart Overlays
! (anatomy-chart-overlays.png)
(Screenshot: EURUSD 15M — chart populated with the indicator's full visible vocabulary; Structure Grid configured to a single TF on the right as a bridge to the dashboard)
Chart Overlays are the indicator's chart-side teaching layer — they show you what the dashboard is actually reading from. Every zone, structural marker, and event tag the indicator draws directly on price corresponds to a cell or column somewhere in the dashboard.
Zones (OB, FVG, iFVG, BB, BPR) appear as coloured regions with right-edge labels naming what they are. Structural markers (BOS, CHoCH, MSS, DISP) sit at the bars where the indicator detected those events. Sweep tags (SWEEP, SMT BEAR, SMT BULL) mark the levels where liquidity was taken.
Chart overlays don't carry hover-tooltips themselves — the dashboard's other components do the descriptive work. Here, the 1-TF Structure Grid sits next to the chart as a bridge: each chart object the indicator draws on price (BEAR OB, BULL FVG, BOS, SWEEP) corresponds to a cell in the grid's columns.
The tooltip surfaced on the TF cell confirms the system-wide principle: "Timeframe row. Hidden rows can be toggled, but engine computation continues."
The chart-side vocabulary is foundational. Every other section in this reference reads from these objects — the Structure Grid summarises them across timeframes, the Confluence row counts them as factors, the engines score them through tier logic.
This view uses three toggles: Show dashboard, Show chart overlays, and Show 7-timeframe market structure grid (configured to one TF). The Properties panel on the left shows the configuration.
The full multi-timeframe treatment of chart objects is covered next, in the Structure Grid.
█ Verdict Banner
! (anatomy-verdict-banner.png)
(Screenshot: EURUSD 10M — engines scoring in opposition, Market State band naming the divergence; centre cell hovered)
The Verdict Banner is the dashboard's headline read — your one-glance answer to "what state is the market in right now?" . Three cells across the top: Continuation on the left, Reversal on the right, Market State between them. Above all three, a Structural Phase header names the broader regime.
The Market State cell carries a tooltip explaining each state's trigger. Here the band reads DIVERGENT SIGNALS, and the tooltip explains the rule: "One engine is BUILDING+ now while the other was BUILDING+ within 15 bars but faded below BUILDING." That last clause matters — the system holds memory of recently-strong engines for 15 bars, so a state can persist after the engine that earned it has cooled.
The Intelligence Briefing uses the same memory principle on a 30-bar window.
Read the banner as a system. The Continuation and Reversal cells each carry a tier (EARLY, FORMING, BUILDING, CONFIRMED) and a direction (BULL ▲, BEAR ▼) from that engine's own scoring.
The Market State band synthesises: CONDITIONS RIPENING when displacement is building, CONTINUATION PHASE or REVERSAL PHASE when one engine dominates, DIVERGENT SIGNALS when the engines disagree. The sub-line names what's driving the read — "driven by CON" or "driven by BIAS + IMP" . The Structural Phase header at the top (PULLBACK, EXPANSION, REVERSAL, CONSOLIDATION) frames the macro regime.
This view uses just two toggles: Show dashboard and Show verdict banner. The Properties panel on the left shows the configuration.
The Verdict Banner is the only section that always speaks — other sections can read quiet, but the banner always reports something , even if INACTIVE 0%.
█ Modifier & Trade-level Strip
! [Modifier strip — firing with engine impact](anatomy-modifier-strip.png)
(Screenshot: EURUSD 10M — Modifier strip showing tag with Verdict Banner context above; modifier cell hovered)
The Modifier & Trade-level Strip surfaces context the engine scores alone can't show — sessions, sweeps, conflicts, structural exceptions. It's a single row that sits beneath the Verdict Banner, normally quiet, lighting up only when a modifier is firing. When it does, it appears as a labelled tag — ` ` for a recent sweep contribution, ` ` for a session penalty, ` ` for a validation warning, and others.
The hovered tooltip explains the active modifier's effect: "Validation conflict cuts Continuation by 1 tier; Reversal treats it as N/A." That's not a passive label — the modifier is actively changing the engine output.
The Verdict Banner shown above reads Continuation FORMING ▼ BEAR 46%; without the conflict cut, the Continuation engine would presumably sit one tier higher. The double-exclamation ` ` notation marks high-priority modifiers — ones that materially change scoring rather than just nudging it.
Each modifier in the strip's vocabulary has its own scoring rule. The strip is the indicator's way of surfacing context that the engine logic alone wouldn't expose — sessions, sweeps, conflicts, structural exceptions.
This view uses three toggles: Show dashboard, Show verdict banner, and Show modifier and trade-level strip. The strip currently requires the Verdict Banner to be enabled to render — captured here as configured.
█ Intelligence Briefing
! (anatomy-intelligence-briefing.png)
(Screenshot: EURUSD 5M — REVERSAL EMERGING state with active sweep being tracked; STATE column hovered)
The Intelligence Briefing answers "what is the indicator actually seeing right now?" in plain structural language. It translates engine percentages into the kind of observation a trader would make at the chart. Three columns: STATE (the indicator's current classification), OBSERVED (what structural evidence has been detected), TRACKING (what live events the system is watching).
The STATE column tooltip surfaces an engine-logic principle: "Reversal is active now or was BUILDING+ within 30 bars, with Continuation outside handoff control." The system has memory — STATE doesn't just reflect the current bar's read, it reflects whether either engine was strong within a 30-bar window.
The handoff system manages how engines pass control between phases. The Verdict Banner uses a similar 15-bar memory on its DIVERGENT trigger; together, the two windows mean the indicator reports on recent history, not just instantaneous classification.
The OBSERVED column reports validated structural events — what the indicator has actually confirmed on chart. The TRACKING column reports pending events with countdowns — sweeps awaiting close confirmation, structural breaks under validation. When TRACKING is active, the system is mid-evaluation; when it's quiet, no live events are pending.
This view uses just two toggles: Show dashboard and Show Intelligence Briefing. The Properties panel on the left shows the configuration.
The Briefing is the dashboard's translation layer between the engines' percentages and the trader's structural vocabulary.
█ 7-Timeframe Market Structure Grid
! (anatomy-structure-grid.png)
(Screenshot: EURUSD 5M — the grid showing per-timeframe readings across Weekly through 1M, with the 5M row's SWING H/L cell hovered to surface its tooltip)
The 7-Timeframe Market Structure Grid is a per-timeframe snapshot of where price sits in its swing range, what structural events have validated, what unfilled order blocks and FVGs sit at proximity, and what trend mode each timeframe is reading. One row per configured timeframe; one column per structural dimension.
Each cell carries a hover-tooltip with its plain-language meaning. Hovering the 5M row's SWING H/L cell surfaces the tooltip shown: "5 52%. Equilibrium (EQ)." followed by a compact legend — the dot glyph marks the current position in the swing range, arrow glyphs name sweep and reclaim events, and the bracketed tags identify zone-state ( for premium, for discount, for equilibrium, for OTE — the optimal-trade-entry discount zone, for proximity to a swing extreme).
The reading "5 52%" means the 5-minute timeframe sits at the 52nd percentile of its current swing range — squarely in equilibrium. Every other cell in the grid carries the same kind of legend on hover.
The grid earns its keep when read vertically . A single timeframe showing tells you that one chart is in discount; five timeframes showing in the SWING H/L column tells you the whole structure is in discount and that any bullish entry sits with the broader ladder, not against it. The OB↑ and OB↓ columns work the same way — a column showing unfilled bullish order blocks at low proximity across multiple timeframes is a more durable read than the same reading on one timeframe alone.
The TREND column on the far right collapses each timeframe's macro mode into one tag (CON for continuation, PUL for pullback, TRN for transition, REV for reversal); scan that column for the macro picture.
This view uses just two toggles: Show dashboard and Show 7-timeframe market structure grid. The Properties panel on the left shows the configuration.
Hidden rows still compute for scoring. Turning a timeframe off the display removes it from the visible grid, not from the engine — the dashboard simplifies the view, not the analysis.
█ VWAP Row
! (anatomy-vwap-row.png)
(Screenshot: EURUSD 10M — VWAP row showing current and prior-day anchor values; VWAP label cell hovered)
The VWAP Row gives you the chart's daily fair-value reference without having to plot VWAP on chart. Three cells: a label, the current anchored VWAP with distance to price, and the prior-day completed VWAP value.
The label cell carries the row's hover-tooltip: "Selected VWAP anchor is the fair-value reference. Middle shows current anchored VWAP and distance; right shows the prior completed anchor value." The middle cell — here reading `D: 1.16335 dn | 0.02% above` — packs two facts: the VWAP value is dropping (`dn`), and current price sits 0.02% above the VWAP line. Direction and distance reported in the same cell. The right cell — here `PD: 1.16412` — shows where yesterday's VWAP closed, available as a reference even after the new day's anchor has reset.
VWAP serves the indicator's confluence and structural logic as a reactive level — a place price often respects on revisit. The row makes the reference and distance available at a glance without requiring VWAP to be drawn on chart.
This view uses just two toggles: Show dashboard and Show VWAP row. The Properties panel on the left shows the configuration.
The data cells don't carry their own tooltips; the label-level tooltip covers the whole row.
█ Confluence Row
! (anatomy-confluence-row.png)
(Screenshot: EURUSD 10M — confluence reading 7/15 STANDARD mixed; TIMING title hovered)
The Confluence Row answers "how much evidence is the indicator seeing for the current read?" — and where that evidence is coming from. A headline score (here 7/15 STANDARD with a progress bar and a composition label) sits above three category lines: ZONE, REFERENCE, and TIMING.
The TIMING title tooltip teaches one category's firing rule: "Timing factors activate during major killzones and while recent BOS, CHoCH, or MSS events are still fresh." The same activation logic applies by analogy to the others. ZONE factors fire when price interacts with structural zones (OB, FVG, BB, BPR, sweep proximity, premium/discount position).
REFERENCE factors fire when price relates to anchored references (EMA, VWAP). Each category has its own count of how many factors are firing out of how many possible.
The breakdown matters more than the headline number. Here ZONE reads 4/7 (partial), REFERENCE reads 0/4 inactive, TIMING reads 3/4 (near full). Same 7/15 score, but the composition tells a sharper story — timing-led and structurally-supported, with no reference-level alignment. The composition label at the top (here mixed ) names the dominant mode: structural-led when ZONE dominates, reference-led when REFERENCE dominates, timing-led when TIMING dominates, mixed when factors spread across categories.
This view uses just two toggles: Show dashboard and Show confluence row. The Properties panel on the left shows the configuration.
The headline number is honest; the breakdown is where the read lives.
█ Detail Strip
! (anatomy-detail-strip.png)
(Screenshot: EURUSD 10M — the strip showing all five chart-timeframe sub-components active; CHART TIMEFRAME INTELLIGENCE header hovered)
The Detail Strip is the indicator's compact answer to "what's happening right now on this chart?" . Five chart-timeframe context readings packed into one row: volume, swing position, volatility, session state, and killzone countdown.
The section header tooltip names the five sub-components in order: "Chart-timeframe inputs: volume, swing position, volatility, lunch state, and active killzone countdown." Each sub-component reports a small but distinct fact. VOL shows current volume relative to average. SWING reports where price sits within the current swing range and which zone-state applies ( , , , , ).
VLT reports volatility deviation from baseline (`+36%` here). The session indicator names the active session (EARLY LDN visible) including the lunch state mentioned in the tooltip. The killzone countdown reports time remaining in the active killzone window (`11% KZ LONDON 160m`).
These are all chart-timeframe inputs — they read from the timeframe of the chart, not from the multi-TF ladder. The Detail Strip is the indicator's compact context summary for "what's happening right now, on this chart."
This view uses just two toggles: Show dashboard and Show detail strip. The Properties panel on the left shows the configuration.
█ Market Context
! (anatomy-market-context.png) (Screenshot: EURUSD 10M — the four-row block showing structural context; IMP row hovered)
Market Context tells you what the broader trading environment is doing — where the magnets are, whether impulse is building, what liquidity is doing, and whether the multi-timeframe picture leans one way. Four rows sitting near the bottom of the dashboard: MAG (magnet proximity), IMP (impulse progression), LIQ (liquidity state), and BIAS (cross-timeframe directional conviction).
The IMP row tooltip reveals the indicator's candle-classification scoring rule: "STRONG/SOLID candles can score impulse; HOLLOW/ABSORBED/WEAK do not, though ABSORBED can add a Reversal pattern bonus." The IMP row shows the recent progression of candle classifications (`WEAK → SLID → SLID → NOW: STRG ↑ | 120% volume`) — a four-stage history of how impulse has built over recent bars. The Scenario 1 worked example above teaches this progression pattern in context.
Each row in Market Context reports a different aspect. MAG names the nearest magnetic level (prior-day high, VWAP, prior-day low) and which is closest. LIQ reports active liquidity state — sweep awaiting, sweep active, structural-side dominance (BSL = buy-side, SSL = sell-side). BIAS aggregates conviction from all seven Structure Grid timeframes into a single signed read; its calibration tiers are 7 full, 5+ leaning, 3+ scattered, and no consensus.
This view uses just two toggles: Show dashboard and Show market context rows. The Properties panel on the left shows the configuration.
The BIAS row's aggregation from seven structure rows is the dashboard's clearest cross-section data flow — confluence among components, not just within one.
---
█ Alerts
Alert conditions span three categories, each individually toggleable, all gated by bar close (no intra-bar firing) and with built-in per-family cooldowns:
ENGINE alerts
fire when the Continuation or Reversal engine enters CONFIRMED. Master toggles per engine gate alerts only — both engines continue computing and displaying regardless.
-
STRUCTURE alerts
fire on chart-timeframe phase transitions — Expansion, Pullback, Consolidation, Continuation, Reversal — and on confirmed sweep reclaims (after the confirmation-window FSM completes).
-
ZONE alerts
fire when price enters swing-high or swing-low proximity, or when price enters the OTE discount (21–38%) or OTE premium (62–79%) zones.
Use them à la carte. Subscribe to phase transitions for context, to engine confirmations for high-tier readings, or to zone entries for proximity-based attention.
! (alert-categories.png)
(Screenshot: Alert conditions grouped by category — ENGINE for verdict confirmations, STRUCTURE for chart-timeframe phase transitions and sweep-reclaim events, ZONE for swing proximity and OTE discount/premium entries — each individually toggleable and bar-close gated)
---
█ Getting Started
Add IID Dual to any chart. The indicator works on any instrument and any timeframe PulseWire supports.
-
Collapse the chart legend (click the arrow next to the indicator name) for a cleaner view — all status-line clutter is already suppressed by design.
-
Read the dashboard. Market State and the Intelligence Briefing give the headline; the structure grid, confluence breakdown, and market context fill in the detail.
-
Configure timeframes under the Timeframes input group to match your workflow, then choose your alert categories.
---
█ Feeling Overwhelmed? Start Simple
Dashboards in this category are often described as overwhelming. IID Dual is built to be turned down. Every section — Verdict Banner, Intelligence Briefing, Structure Grid, VWAP, Confluence, CTI strip, Market Context, Footer, Chart Overlays — is individually toggleable from the Properties panel. Each of the four worked examples above shows a different dashboard configuration — the toggles in their Properties panels are the recipe.
! (feeling-overwhelmed-divergent-demo.png)
(Screenshot: EURUSD 10M · all sections lit · Cont 42% vs Rev 50% · the system speaking in full)
A clean starting point: leave only Market State and the Intelligence Briefing on, and add bands back as their meaning clicks. Anything you hide still computes for scoring — you simplify the view, not the analysis. Every dashboard cell and every input carries a plain-language tooltip on hover, and status-line clutter is already suppressed by design.
! (properties-display-toggles.png)
(Screenshot: Properties → Inputs → Display panel — every dashboard section individually toggleable, with (i) tooltip indicators that reveal plain-language explanations on hover for inputs and dashboard cells throughout)
---
█ ICT/SMC Concepts Used
Break of Structure (BOS) —
price closes beyond a prior swing in the existing trend direction, confirming continuation.
-
Change of Character (CHoCH) —
price closes beyond a prior swing against the current trend, signalling a possible regime change.
-
Market Structure Shift (MSS) —
a higher-conviction structural break, often paired with displacement, marking a transition between bullish and bearish delivery.
-
Order Block (OB) —
the last opposing candle before a displacement move, treated as an institutional reactive level.
-
Fair Value Gap (FVG) —
a three-candle imbalance where price moved with insufficient overlap, leaving an inefficiency that may be revisited.
-
Inverted FVG (iFVG) —
an FVG that has been traded through and now acts as resistance/support in the opposite direction.
-
Breaker Block (BB) —
a failed order block that has been broken and retested, often signalling a structural pivot.
-
Balanced Price Range (BPR) —
overlap of bullish and bearish FVGs, treated as a high-probability reactive area.
-
Liquidity Sweep —
price taking out a prior swing high/low (equal highs/lows or pivot extremes) before reversing.
-
Sweep Reclaim —
a confirmed sweep where price closes back inside the original range with follow-through, distinguishing a successful raid from a continuation.
-
Premium / Discount Zones —
the upper and lower halves of the active swing range; OTE values sit within these.
-
Optimal Trade Entry (OTE) —
the 62–79% premium retracement (short-bias) and the 21–38% discount retracement (long-bias) of the active swing.
-
Kill Zones —
the Asian, London, NY AM, and NY PM session windows where institutional volume is concentrated.
-
VWAP —
Volume Weighted Average Price, anchored to Daily, Weekly, Session, or Monday, with previous-anchor reference.
-
Impulse Classification —
categorisation of directional moves by displacement strength, absorption, and volume context.
---
█ Limitations, Transparency & Development
Built-in tooltip system.
Every cell, column header, and dashboard section in IID Dual carries a contextual tooltip. Hover over any data point, a verdict state, a confluence factor, a structure label, a modifier, a row title, and the indicator explains what you're looking at, how it was calculated, and what it means in the current market context.
The dashboard is designed to teach as you use it, so newcomers to ICT and SMC concepts can build fluency without leaving the chart, and experienced traders can verify the exact methodology behind any reading. The Intelligence Briefing is the primary interpretive layer; the tooltip system is the reference layer beneath it.
Non-prescriptive by design.
This indicator describes market conditions. It does not issue buy or sell instructions, place orders, or claim a strategy edge. Alerts report state changes — not trade calls.
Methodology honesty.
The confluence engine treats its factors with equal weighting; the Intelligence Briefing's OBSERVED column is intentionally conservative and may show fallback narration when structural evidence is sparse. The Reversal engine requires hard gates before it will score, which by design produces fewer signals than the Continuation engine.
Not financial advice.
Trading involves risk. This indicator is an analytical tool. All decisions are the trader's.
Active development.
IID Dual is actively maintained. Feature updates, additional alert conditions, methodology refinements, and bug fixes are delivered through code updates — see release notes below the description for the latest changes. Indicator
Indicator
MTF RSI Price Levels [DIN]## 📌 MTF RSI Price Levels
**What if your RSI could tell you exactly where price needs to go — before it gets there?**
Most traders use RSI to read momentum after the fact. This indicator flips that entirely. Instead of watching RSI react to price, **MTF RSI Price Levels projects the exact price required for RSI to reach overbought or oversold on up to four timeframes simultaneously** — plotted live, directly on your chart, right now.
The result is a set of forward-looking price levels that act as precision targets and confluence zones. Whether you're scalping the 1H or positioning on the weekly, you'll know in advance where RSI exhaustion lives — and when multiple timeframes agree, those levels become some of the most powerful areas on your chart.
---
## 🔬 How It Works
The RSI Price Level math is built on Wilder's smoothing algorithm — the same engine that powers the standard RSI. At every bar close, the indicator works backwards through the formula: given the current average gain and average loss at a specific timeframe, it solves for the exact closing price that would push RSI to your target level (default 70 overbought / 30 oversold) on the next bar.
This is not an approximation. It is a mathematically derived price level, recalculated live across every timeframe you have enabled, displayed as a labeled box and a centerline extending right from the current bar. Every time price moves, the levels update. Every time a new bar closes, the calculation refreshes.
Run it on crypto, forex, indices, or equities — wherever RSI has teeth, these levels will show you exactly where the market is being pulled.
---
## ☁️ The MTF Cloud
Above and below price, two dynamic clouds form — one anchored at your overbought RSI level, one at oversold — each blending between two user-selected timeframes. Where the clouds from different timeframes converge, you get a gradient zone of confluence. The closer price approaches these areas, the more compressed momentum tends to become.
The cloud is not decorative. It represents the space between what two different timeframe RSI calculations say about the same price level. When they agree, the cloud tightens. When they diverge, it widens. Bull and bear coloring shifts automatically based on where current price sits relative to the zone, giving you an instant read on whether you're approaching resistance or support.
---
## 📐 Built-In Divergence Engine
Hidden momentum shifts are detected automatically using a pivot-based divergence system running on your chosen timeframe. When price prints a higher high but RSI prints a lower high — or vice versa — the signal is marked directly on the chart with a clear label. No separate RSI panel needed. No manual scanning. The divergence comes to you.
- **Bearish Divergence (DIV▼)** — Price higher high, RSI lower high. Momentum fading into resistance.
- **Bullish Divergence (DIV▲)** — Price lower low, RSI higher low. Momentum building into support.
Both pivot lookback and divergence timeframe are fully adjustable.
---
## ⚙️ Full Customization — Built for Serious Traders
This indicator was designed so that no two setups have to look alike. Every parameter that matters is exposed in the settings panel, organized by group:
**Per Timeframe (up to 4 timeframes):**
- Timeframe selection (any TF supported by PulseWire)
- Independent RSI length per timeframe
- Independent RSI source per timeframe
- Custom overbought and oversold threshold levels
- Individual box color, line color, and transparency per TF
**Cloud Settings:**
- Choose any two timeframes to anchor the cloud
- Set your own Level A and Level B for the fill range
- Independent bull and bear color for inner and outer cloud layers
- Gradual two-layer gradient fade built in
**Box & Line Style:**
- Box extend length (how far right the box projects)
- Box height as a percentage of price (works across all asset classes)
- Line width and line style (solid, dashed, dotted)
- Toggle labels on/off with adjustable label size
**Divergence:**
- Enable/disable divergence detection independently
- Choose the timeframe RSI runs the divergence scan on
- Adjust RSI length and pivot lookback for sensitivity control
**Alerts (4 Conditions):**
- Price enters any overbought zone
- Price enters any oversold zone
- Bullish divergence detected
- Bearish divergence detected
Set your alerts once. Let the indicator do the watching.
---
## 🎯 Best Use Cases
- **Confluence trading** — Stack multiple TF RSI levels and watch for price to cluster around the same area across 1H, 4H, Daily, and Weekly simultaneously. These are your highest-conviction zones.
- **Target projection** — In a trending move, use the OB levels on higher timeframes as your take-profit targets. The math tells you where RSI exhaustion lives.
- **Reversal hunting** — When price is approaching a major OS level on the Daily or Weekly with bullish divergence firing beneath, you have a layered, high-probability setup.
- **Scalping structure** — On lower timeframes, the levels act as short-term magnets. Watch how price respects or breaks through these zones and trade the reaction.
---
## 📋 Usage Notes
- **Higher timeframe levels carry more weight.** A Weekly OB level that aligns with a Daily OB level is significantly more significant than either alone.
- **The box height input is a percentage of price.** The default (0.003 = 0.3%) works well for most assets. Crypto with large price ranges may benefit from a lower value; lower-priced assets may need it slightly higher.
- **Divergence signals are plotted with an offset** equal to the pivot lookback period. This means the signal appears when the pivot is confirmed, not at the exact candle — this is intentional and keeps signals non-repainting.
- **Cloud timeframes are independent of the level timeframes.** You can run 1H + 4H levels while anchoring your cloud to 4H + Daily for a broader confluence picture.
---
## 🔔 Alerts Setup
After adding the indicator to your chart, go to the Alerts panel, create a new alert, and select this indicator from the condition dropdown. Four conditions are available:
1. Price in OB Zone
2. Price in OS Zone
3. Bearish Divergence Found
4. Bullish Divergence Found
---
*Built for traders who want their RSI to work harder.*
*Clean levels. Real math. No guessing.*
**— DIN** Indicator
VWAP + Volume Clusters [Pro]Институциональный VWAP и сессионный профиль объёма в одном инструменте — для intraday-трейдинга по логике «цена движется от ликвидности к ликвидности».
Индикатор объединяет два ключевых ориентира внутридневной торговли: VWAP как institutional reference (средняя цена, по которой реально торговали крупные участники) и распределение объёма по уровням как зоны
интереса. Минималистичный визуал, всё настраивается.
Что внутри
1. Session VWAP + полосы σ
VWAP с привязкой к сессии (сброс в начале дня) и полосами стандартных отклонений 1σ / 2σ / 3σ. Полосы включаются по отдельности, множители настраиваются. VWAP — это «справедливая цена» дня: цена выше VWAP =
контроль покупателей, ниже = продавцов. Полосы 2σ/3σ — зоны статистического перерастяжения (потенциальный возврат к среднему).
2. Anchored VWAP
Второй VWAP с ручным якорем (по умолчанию — начало месяца). Удобно мерить среднюю цену от важного события: открытие недели/месяца, экстремум, новостной импульс.
3. Session Volume Profile (кластеры объёма)
Профиль объёма за текущую сессию, до 100 бинов:
- POC — уровень максимального объёма, точка контроля (магнит цены).
- VAH / VAL — границы зоны 70% объёма (Value Area).
- HVN — узлы высокого объёма (зоны принятия цены → поддержка/сопротивление).
- LVN — узлы низкого объёма, «пустоты» в распределении (цена проходит их быстро → зоны отбраковки).
- Гистограмма объёма справа от свечей.
4. Killzones (опционально)
Фоновая подсветка торговых сессий Frankfurt / London / NY (часовой пояс настраивается). По умолчанию выключено.
Алерты
VWAP touch · 2σ extreme · 3σ extreme (reversion zone) · POC test · VWAP reclaim (bull/bear). Каждый — отдельным переключателем, по умолчанию выключены.
На каких инструментах работает лучше
- Фьючерсы (NQ, ES, GER40/DAX и др.) и индексы CME — реальный биржевой объём, поэтому профиль и его уровни максимально надёжны. Основной кейс.
- Forex — VWAP полностью валиден, но профиль строится на tick volume (число тиков, не контракты), поэтому уровни объёма — ориентир, а не истина.
Как использовать
1. Цена у VWAP — точка равновесия, у 2σ/3σ — зона перерастяжения.
2. POC и HVN — уровни притяжения и реакции; LVN — зоны быстрого прохода.
3. Reclaim VWAP — смена внутридневного контроля.
▎ Volume Profile рассчитывается для текущей сессии (исторические профили не отображаются — сделано ради производительности). Индикатор информационный, не является торговым сигналом. Indicator
Indicator
VCGZ BOT CLEAN v3.3 - Stable ScoredVCGZ BOT CLEAN v3.3 is a Volume Confirmed Golden Zone strategy using 15m EMA/RSI bias with 5m execution. It detects impulse moves, waits for a 0.618–0.650 retrace, requires confirmation candle strength, rejection/sweep behavior, local trend alignment, and volume confirmation. Each setup is scored 1–5, with trades triggering only at the selected minimum score. Includes entry-only JSON alerts for bot execution and clean chart labels showing side, score, entry, stop, and TP1. Strategy
Price Action Invalidation Stop Loss (TheStrat)A stop-loss visualizer that places the stop where price action says your directional read is wrong, defined by higher-timeframe bar structure. Based on TheStrat methodology by Rob Smith.
ABOUT THESTRAT
TheStrat, developed by Rob Smith, is a price-action framework that classifies every bar by how it relates to the prior bar's range, then reads that structure across multiple timeframes. Every bar is objectively one of a few types, and the way those types stack across timeframes defines whether a move is continuing or reversing.
BAR TYPES
1 (Inside bar): trades entirely within the prior bar's range. High is below the prior high and low is above the prior low. Consolidation by definition.
2u (Directional up): takes the prior bar's high but not its low.
2d (Directional down): takes the prior bar's low but not its high.
3 (Outside bar): takes both the prior bar's high and its low. Range expansion on both sides.
Failing 2 (F2): a bar that was a directional 2 but current price retraces back into the range of the prior candle. A failed 2u breaks the prior high but falls back below the highest high of the prior candle; a failed 2d breaks the prior low then turns back up above the lowest low of the prior candle. A failed 2 marks rejection of the attempted move and often a reversal.
WHAT IT DOES
The stop sits at the level where the directional thesis would be invalidated: the prior higher-timeframe bar's high or low, the point where that timeframe prints a directional 2 or 3 against the position.
It assumes entry on the 15-minute timeframe or lower, using the 30-minute and 60-minute as the structural higher timeframes. The indicator behaves identically on any chart resolution at or below 15m. Whether you load it on a 5m or 15m chart, it references the same 15m / 30m / 60m structure.
THREE STATES
Long (blue): stop below price at the relevant higher-timeframe invalidation level.
Short (orange): stop above price.
Neutral (gray): no side is structurally supported, so the indicator stays flat.
Invalidation exits the current side. A reversal happens only if the opposite side is also valid. Otherwise the indicator goes neutral rather than flipping, which avoids the whipsaw of a pure stop-and-reverse model in choppy conditions.
HOW THE STOP IS DERIVED
Base level: the tighter of the prior 30m / 60m extremes (the higher of the two lows for a long, the lower of the two highs for a short).
Tightening: when a higher timeframe closes a directional 2 in your favor, the stop pulls up to that bar's low (long) or down to its high (short).
Failed-2 handling: if a higher timeframe breaks its prior high or low then fails back through it, the stop tightens to the most recent completed 15m level.
3-override (optional): while a bar is a live outside bar (3), the stop holds at that bar's extreme so the expansion can resolve instead of tripping mid-bar.
A direction is only active when the 30m and/or 60m is in a clean 2 or 3 in that direction, not a failed 2, failed 3, or inside bar.
SETTINGS
Behavior: tighten on 2-in-direction, 3-override, neutral state.
Visual markers (off by default): state transitions, tighten events, state background tint, higher-timeframe reference levels.
Debug: structured Pine Logs of every state change, tighten, and near-miss for bar-by-bar auditing.
HOW TO USE
Add it to any chart at 15-minute resolution or lower. The single stepped line is the live invalidation stop for the currently supported direction. When the line is absent (neutral), structure is mixed and there is no clean side.
This is a visualization and study tool. It is not a strategy, does not place orders, and does not generate buy/sell signals. Past structure does not guarantee future behavior. Always manage your own risk. Indicator
