Strategy
ES/NQ Daily Levels Paste-In Sup/Res MapperDaily Levels is a manual, paste-in mapping tool. Paste a list of price levels into the settings and it draws them on your chart as clean lines and shaded zones with labels. It does not calculate signals or repaint — it simply renders the levels you enter.
Works on any symbol — ES, NQ, SPY, SPX, stocks, futures, forex, and crypto. Just paste levels that match that instrument's price.
Leave the box blank and it shows a few sample reference levels around current price (clearly tagged "sample", 10 points apart by default) so you can see how it works on any chart. The samples auto-hide the moment you paste your own levels. (The 10-point default spacing suits ES/NQ; for other instruments set the spacing to fit, or set it to 0 for auto.)
WHAT IT DRAWS
- Single prices → horizontal lines with labels
- Ranges (e.g. 5200-5205) → shaded zones
- Section groups you can label: Resistances, Supports, and special groups (Backtest, Add, Breakdown, Short)
- Tag any level "(major)" and it renders thicker
DYNAMIC S/R FLIP (optional)
When enabled, each level you paste under Supports/Resistances is colored by where price is right now:
- Price above the level → acts as support (green, "S")
- Price below the level → acts as resistance (red, "R")
- Price inside a zone → neutral / in-play (yellow)
Turn it off to keep the exact section labels you pasted.
HOW TO USE
1. Add the indicator to your chart.
2. Open its settings → "PASTE YOUR DAILY LEVELS HERE".
3. Paste your levels, one section per line, for example:
Resistances: 5210, 5218 (major), 5225-5228
Supports: 5188, 5175 (major)
4. Lines, zones, and labels draw automatically. Colors, widths, spacing, and label styling are all configurable.
NOTE
The sample levels are auto-generated placeholders for demonstration only — they are not recommended levels and should not be used for trading. This tool does not generate, suggest, or predict levels; it only displays the ones you enter.
For educational purpose Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Smart Money Liquidity Detector [PickMyTrade]Smart Money Liquidity Detector
This indicator measures market microstructure — the structural signals that institutional activity leaves behind in price and volume data. It combines four academically grounded models into a single Microstructure Stress Score (MSS) ranging from 0 to 100.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
MODELS USED
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
► Roll (1984)
Synthetic bid-ask spread estimated from the serial covariance of price changes. High Roll spread indicates wider market-maker quotes — historically associated with periods of elevated volatility.
► Corwin-Schultz (2012)
High-low range spread estimator. Uses the relationship between single-period and two-period high-low ranges to back out the effective spread without requiring tick data.
► Amihud (2002)
Illiquidity ratio measuring price move per unit of volume. High Amihud values mean large price impact per dollar traded — a sign of thin order books.
► Kyle Lambda (1985)
Price impact of signed order flow. Derived from the regression of price changes on volume direction. Estimates how aggressively informed participants are moving the market.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
MICROSTRUCTURE STRESS SCORE (MSS)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Each model is z-scored over a rolling window, normalised to , then averaged and scaled to 0–100.
MSS = (Roll + Corwin-Schultz + Amihud + Kyle Lambda) / 4 × 100
- MSS > 70 → High stress. Spreads wide, illiquidity elevated, price impact high. Consistent with institutional order flow.
- MSS 30–70 → Normal range. No structural signal.
- MSS < 30 → Low stress. Tight spreads, liquid conditions, quiet tape.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ANOMALY DETECTION
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Any individual model z-score crossing ±2σ triggers an anomaly flag. Anomaly bars are highlighted in orange on the chart. Roll and Corwin-Schultz anomalies are marked with coloured circles directly on the MSS line.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
INPUTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- Spread window (default 20) — lookback for Roll and Corwin-Schultz estimation
- Z-score window (default 60) — rolling window for z-scoring all models
- Impact window (default 20) — lookback for Amihud and Kyle Lambda
- MSS normalise window (default 100) — window for normalisation before scoring
- Toggle each model's z-score plot individually
- Highlight anomaly bars on/off
- Info table on/off
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
INFO TABLE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Top-right table displays live values and z-scores for all four models, the current MSS reading, and anomaly status on the last closed bar.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- Works on any liquid instrument and any timeframe. Most effective on futures, forex, and equity indices where volume data is reliable.
- This indicator does not generate buy or sell signals. It is a market structure diagnostic tool.
- Powered by PickMyTradeLib — PickMyTrade's open quantitative library.
This script is published for educational and informational purposes only. It does not constitute financial advice. Use at your own risk. Past microstructure behaviour does not guarantee future price outcomes.
Indicator
Indicator
Indicator
Institutional 7-Point Checklist█ INSTITUTIONAL 7-POINT PRE-TRADE CHECKLIST v2.0 █
█ Pine Script® v6 █
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
OBJECTIVE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Most retail traders show up at 9:30 AM with no plan. They react to 5-minute noise and get chopped to pieces. This indicator solves that.
It runs a 7-point institutional checklist automatically — pulling data from the 4H, 1H, and daily timeframes — and displays a real-time pass/fail panel directly on your chart. Before you take a single trade, the panel tells you whether TODAY is even a trading day, what direction to expect, where to enter, and what to target.
The framework combines two proven concepts:
▸ 4H Chart Analysis — reading institutional expansion vs consolidation for structural bias
▸ Session Profiling — checking whether Asia or London reversed to classify New York as continuation or reversal
v2.0 adds the layers that give you complete market context without switching timeframes:
▸ Multi-timeframe liquidity mapping (Daily, Weekly, Monthly highs/lows)
▸ Anchored VWAP (Daily, Weekly, Monthly) for institutional cost basis
▸ Smart moving averages at the periods that actually matter per timeframe
▸ Midnight Open reference line
▸ Smart nearest-liquidity detection across all tiers
Everything new is an optional toggle. The default view stays clean — just the checklist, PDH/PDL, Daily VWAP, and the 4H 20 EMA. Power users turn on the layers they want.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
THE 7 CHECKS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✅ 1. Is the 4H expanding?
Evaluates the last three completed 4H candles. "Expanding" means ≥2 candles have bodies larger than the expansion multiplier × ATR(20), AND the most recent candle has small wicks relative to its range. If the 4H is consolidating → no trade today.
✅ 2. Did the prior session reverse or consolidate?
Tracks Asia (6 PM – 2 AM ET) and London (2 AM – 5 AM ET) in real time. A session "reversed" if it swept a key level and closed back through it. "Consolidated" if its range was under 40% of the daily ATR.
✅ 3. Continuation or reversal day?
▸ Any prior session reversed → NY = CONTINUATION
▸ No session reversed → NY = REVERSAL
✅ 4. Nearest FVG (entry zone)
Scans the 1H for 3-candle Fair Value Gaps — unfilled imbalances from aggressive expansion. Identifies the nearest bullish or bearish FVG with its midpoint price. This is your entry zone.
✅ 5. Nearest external liquidity (target) — NEW: SMART MULTI-TF
Now scans across Daily, Weekly, and Monthly levels (whichever are enabled) and automatically identifies the closest liquidity pool above and below price. The panel shows the tier label (PDH, PWH, PMH, etc.) so you know which level matters most right now. Bigger pools = stronger magnets.
✅ 6. Has price swept external liquidity? (trigger) — NEW: ANY TIER
Monitors sweeps across all enabled tiers. If price takes out PWH while PDH hasn't been swept, that still counts — any tier sweep is a valid trigger. The panel lists exactly which levels have been swept today.
✅ 7. One-sentence bias (auto-generated)
Combines all findings into a single actionable statement:
"4H expanding bearish. NY=CONTINUATION. Pullback into FVG → target PDL."
NEW: CONTEXT ROW
Below the 7 checks, a context line shows price position relative to Daily VWAP and 4H 20 EMA. Example: "above VWAP | above 4H EMA" — a quick confluence check without reading the chart.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NEW IN v2.0: LIQUIDITY HIERARCHY
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Not all liquidity is equal. A daily level might produce a 10-point displacement on NQ. A weekly level might produce 50 points. A monthly level could fuel a full trend day.
▸ Previous Day H/L (PDH/PDL) — ON by default
Yesterday's range extremes. Stop losses from day traders. Blue dashed lines.
▸ Previous Week H/L (PWH/PWL) — OFF by default
Swing trader stops. Much larger pool than daily. Purple dashed lines.
▸ Previous Month H/L (PMH/PML) — OFF by default
Institutional swing and fund allocation levels. Orange solid lines (thicker for visual hierarchy).
▸ Midnight Open — OFF by default
Price at 00:00 ET. Directional separator for ICT-style analysis. Gray dotted line. Above midnight open = bullish lean, below = bearish lean.
Each tier has its own color and line weight so you can glance at the chart and instantly see which pool price is approaching. The smart detection in Checks 5 and 6 automatically picks the nearest level regardless of tier.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NEW IN v2.0: ANCHORED VWAP
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
VWAP shows where the majority of institutional money actually transacted. It's not just an average — it's the volume-weighted cost basis.
▸ Daily VWAP — ON by default (amber)
Anchored to today's open. The single most referenced level by institutional algorithms during NY session. When price is above VWAP, institutions are in profit and likely to defend it. Below = underwater.
▸ Weekly VWAP — OFF by default (purple)
Anchored to Monday's open. Broader lens on net bullish/bearish flow for the week. Confirms your 4H bias: if 4H is expanding bullish AND price is above weekly VWAP = confluence.
▸ Monthly VWAP — OFF by default (orange)
Background context. Rarely comes into play intraday, but when price tests monthly VWAP at a weekly liquidity level = high-conviction zone.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NEW IN v2.0: MOVING AVERAGES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Each MA is chosen for a specific purpose at its timeframe. No filler MAs — every line earns its place on the chart.
▸ 5-MIN 9/21 EMA — execution pair — OFF by default (cyan / indigo)
After your sweep + displacement, the 5m 9 EMA crossing above/below the 21 EMA confirms micro order-flow shift. The gap between them acts as a dynamic FVG — separation = imbalance, convergence = equilibrium.
WHY 9 AND 21: The 9 EMA covers roughly 45 minutes — one micro session. The 21 EMA covers ~105 minutes — the 9:30–11:00 kill zone. Together they capture the rhythm of institutional execution.
▸ 1H 9/21 EMA — intraday pulse — OFF by default (cyan / indigo, stepline)
The 9 EMA represents one full trading session (~6.5 hours). If price rides the 1H 9 EMA during expansion = clean momentum. The 21 EMA covers about two trading days — the intraday trend anchor. Price whipping above/below the 1H 9 EMA = chop warning.
WHY 9 AND 21: On the 1H, 9 periods = one session's worth of candles. 21 periods ≈ two full sessions. These match the session profiling logic in Check 2 — you're seeing the same structure as numbers.
▸ 4H 20 EMA — swing direction — ON by default (green, stepline, thick)
This is the primary MA. It represents roughly one trading week. Institutional swing traders watch the 4H 20 EMA for pullback entries. When your expansion candles are pushing away from this level = strong momentum. When they're drifting back = fading expansion.
WHY 20: On the 4H chart, 20 periods = ~3.3 trading days. This captures the core weekly rhythm — the period where institutional swing positions are managed.
▸ DAILY 20 EMA — monthly trend — OFF by default (yellow, stepline)
Roughly one month of trading days. If price is above the D 20 EMA, the intermediate trend supports your intraday bias. Below it, your bullish setups have headwind.
WHY 20: 20 trading days ≈ 1 calendar month. This is the standard period institutional portfolio managers use for intermediate trend assessment.
▸ DAILY 50 SMA — quarterly trend — OFF by default (orange, stepline)
About 2.5 months of data. When the D 20 EMA is above the D 50 SMA = healthy trend. When they converge or cross = transition zone where 4H consolidation becomes more common. Background context, not a trade trigger.
WHY 50: 50 trading days ≈ one quarter. Fund managers and institutional desks use this as the boundary between "trending" and "mean-reverting."
IMPORTANT: Higher-timeframe MAs projected onto a 5-min chart appear as staircase lines (stepline style). This is correct — the staircase shows you exactly where the value was when the higher timeframe last printed. It's not a bug; it's a feature.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHAT APPEARS ON YOUR CHART
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DEFAULT VIEW (clean — what loads when you first add the indicator):
▸ Checklist panel with all 7 checks + context row
▸ PDH/PDL liquidity lines (blue dashed)
▸ FVG zone (green or red shaded box)
▸ Daily VWAP (amber line)
▸ 4H 20 EMA (green stepline)
▸ Summary badge: TRADE READY / WAIT FOR SETUP / NO TRADE TODAY
OPTIONAL LAYERS (toggle on in settings):
▸ PWH/PWL (purple dashed)
▸ PMH/PML (orange solid, thicker)
▸ Midnight Open (gray dotted)
▸ Weekly VWAP (purple line)
▸ Monthly VWAP (orange line)
▸ 5m 9/21 EMA pair (cyan/indigo)
▸ 1H 9/21 EMA pair (cyan/indigo stepline)
▸ D 20 EMA (yellow stepline)
▸ D 50 SMA (orange stepline)
▸ Price labels on all level lines
All colors are fully customizable in settings.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
FULL PROPERTIES / SETTINGS REFERENCE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
THRESHOLDS:
▸ Expansion multiplier (1.5) — body must exceed this × ATR(20). Raise for volatile instruments, lower for quieter ones.
▸ Max wick-to-range ratio (0.35) — candle must be cleaner than this threshold to count as expansion.
▸ 4H candles to evaluate (4) — how many candles the script considers for expansion profiling.
SESSIONS:
▸ Asia session (1800–0200) — overnight accumulation window
▸ London session (0200–0500) — primary reversal window
▸ New York session (0930–1600) — execution window
▸ Timezone (America/New_York) — also supports America/Chicago, Europe/London, Asia/Tokyo, UTC
LIQUIDITY LEVELS:
▸ Previous Day H/L (on) — blue dashed, width 2
▸ Previous Week H/L (off) — purple dashed, width 2
▸ Previous Month H/L (off) — orange solid, width 3
▸ Midnight Open (off) — gray dotted, width 1
▸ All colors are customizable per tier
ANCHORED VWAP:
▸ Daily VWAP (on) — amber, width 2
▸ Weekly VWAP (off) — purple, width 2
▸ Monthly VWAP (off) — orange, width 1
MOVING AVERAGES:
▸ 5m 9/21 EMA (off) — cyan fast / indigo slow
▸ 1H 9/21 EMA (off) — cyan fast / indigo slow, stepline
▸ 4H 20 EMA (on) — green, stepline, thick
▸ D 20 EMA (off) — yellow, stepline
▸ D 50 SMA (off) — orange, stepline
▸ All colors customizable
FAIR VALUE GAP:
▸ Plot FVGs on chart (on) — green box = bullish, red box = bearish
DISPLAY:
▸ Show checklist panel (on)
▸ Panel position (top_right) — 6 positions available
▸ Panel text size (small) — tiny / small / normal / large / huge
▸ Header/summary text size (normal) — controls title and badge
▸ Show price labels on levels (on) — small tags at the right edge of each line
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO USE — STEP BY STEP
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SETUP:
1. Add to a 5-minute chart (NQ, ES, or your instrument)
2. The panel auto-populates from 4H, 1H, and daily data — no timeframe switching needed
3. Toggle on additional layers as desired in settings
MORNING ROUTINE:
6:00 AM — Open chart. Panel shows:
▸ Check 1: 4H expanding? If ❌ → no trade today, done
▸ Check 2: What did Asia and London do?
▸ Check 3: Continuation or reversal day?
▸ Context: Price vs VWAP and 4H EMA alignment
6:15 AM — Read auto-generated bias (Check 7). Write it down.
9:15 AM — Panel updates:
▸ Check 4: FVG present? Zone is shaded on chart
▸ Check 5: Nearest liquidity above/below with tier labels
9:30 AM — Watch for Check 6 to flip green (sweep at any tier)
TRADE READY (all checks green):
▸ Drop to 5-min for timing
▸ Wait for displacement + CISD in your bias direction
▸ Use 5m 9/21 EMA cross as micro-confirmation (if enabled)
▸ Enter after confirmation
▸ Stop above/below the sweep
▸ Target the opposite liquidity pool
10:30 AM — In profit, stopped out, or no setup. Done for the day.
KEY RULES:
▸ Check 1 is ❌ → close the laptop
▸ Can't write bias in one sentence → no trade
▸ 0–2 trades per day max
▸ The indicator identifies CONDITIONS, not entries. Final execution is yours.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
RECOMMENDED SETUPS BY STYLE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
MINIMALIST (learning the framework):
ON: Checklist panel, PDH/PDL, FVG, Daily VWAP, 4H 20 EMA
OFF: Everything else
→ Clean chart, just the essentials. Master the 7 checks first.
INTERMEDIATE (adding confluence):
ADD: PWH/PWL, Midnight Open, 5m 9/21 EMA pair
→ Weekly liquidity for bigger targets, midnight open for directional lean, execution MAs for timing entries.
FULL CONTEXT (experienced trader):
ADD: PMH/PML, Weekly VWAP, 1H 9/21 EMA, D 20 EMA, D 50 SMA
→ Complete institutional map. Every level you might need is on one chart. Use price labels (on) to read values at a glance.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ALERTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Three built-in alert conditions:
▸ "4H began expanding" — morning wake-up call: today is potentially a trade day
▸ "External liquidity swept" — fires on the first sweep of ANY enabled tier (PDH, PWH, PMH, etc.)
▸ "ALL CHECKS PASSED" — all 7 conditions met. Eyes on chart — setup is live.
Set via: right-click chart → Add alert → select indicator → choose condition
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
MA PERIOD RATIONALE — WHY THESE NUMBERS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Every period was chosen to align with a real institutional time horizon:
5m 9 EMA = ~45 min = one micro-session (the opening drive)
5m 21 EMA = ~105 min = the 9:30–11:00 AM kill zone window
1H 9 EMA = ~1.4 days = one full trading session
1H 21 EMA = ~3.2 days = two full sessions (matches session profiling)
4H 20 EMA = ~3.3 days = one trading week's core rhythm
D 20 EMA = ~1 month = intermediate trend (monthly portfolio reviews)
D 50 SMA = ~2.5 months = quarterly trend (fund allocation cycles)
The 4H 20 EMA is ON by default because it's the single most useful MA for this framework — it directly represents the timeframe the entire strategy is built on.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
UNDERLYING ALGORITHM
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The entire framework rests on one cycle:
External liquidity → Internal liquidity → External liquidity
(Sweep stops) → (Fill the FVG) → (Target opposite stops)
▸ The 4H chart tells you the DIRECTION
▸ The session profile tells you the TIMING
▸ The VWAP tells you the INSTITUTIONAL COST BASIS
▸ The MAs tell you whether STRUCTURE supports your bias
▸ The 5-minute chart is for EXECUTION ONLY
You read the book from chapter 1, not from the last page.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
TUNING TIPS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
"Check 1 always red" — lower expansion multiplier to 1.2 or 1.0. Different instruments have different volatility profiles.
"FVG never shows" — there's no unfilled 1H gap right now. Wait for the next expansion candle.
"Session labels wrong" — set the Timezone dropdown to match your chart's exchange timezone.
"VWAP looks flat" — if your instrument has no volume data (some forex/CFD feeds), VWAP defaults to HLC3. Switch to a data feed that provides volume, or disable VWAP.
"Too many lines on chart" — start with the Minimalist setup (see Recommended Setups). Only toggle on new layers after you've used the basic setup for at least a week.
"4H EMA appears as staircase" — this is correct. Higher-timeframe data on a lower-timeframe chart updates in steps. The staircase shows you the exact value at the last 4H close.
"Panel covers price" — change panel position to a different corner, or reduce text size.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
TIMEFRAMES & INSTRUMENTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Designed for: 5-minute chart (execution timeframe)
Internally references: 4H (bias), 1H (FVG), Daily/Weekly/Monthly (liquidity + MAs)
Works on: Futures (NQ, ES, YM, RTY), Forex, Crypto, Equities
Best suited for: Intraday traders with a 9:30–11:00 AM ET window
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHY PINE SCRIPT v6
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This script is written in Pine Script v6 — the latest version of PulseWire's language (released Nov 2024). Benefits over v5:
▸ Strict boolean logic — booleans are always true or false, never na. Eliminates an entire class of edge-case bugs in complex conditions like the multi-check panel.
▸ Short-circuit evaluation — and/or operations stop evaluating the moment the result is determined. Significant performance improvement for scripts with many compound conditions (which this checklist uses heavily).
▸ Future-proof — all new PulseWire features going forward are v6 exclusive. Dynamic requests, footprint data, enhanced arrays, and upcoming additions will only work on v6.
▸ Cleaner integer division — 5/2 now correctly returns 2.5 instead of 2. Important for any ratio calculations (expansion multiplier, wick ratios).
If you're migrating from the v1 script (which was v5), the logic is identical — v6 just makes it faster and more reliable.
x.com/tsmake
Developed after reading: x.com
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This indicator is an EDUCATIONAL TOOL designed to enforce trading discipline. It does NOT generate buy/sell signals, does NOT constitute financial advice, and does NOT guarantee profitability. The checklist identifies structural conditions — the final entry decision, risk management, and position sizing are entirely your responsibility.
Trading futures, equities, options, forex, and crypto carries significant risk of loss. Past performance does not guarantee future results. Backtest thoroughly, start with a simulator, and never risk capital you cannot afford to lose. Consult a licensed financial advisor before making trading decisions.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
TAGS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ICT, Smart Money, Liquidity, Fair Value Gap, FVG, Session Profile, VWAP, PDH, PDL, PWH, PWL, PMH, PML, Institutional, Checklist, Pre-Market, Bias, External Liquidity, Internal Liquidity, Moving Average, 4H, NQ, ES, Futures, Forex Indicator
RTH Breaks + Midnight ConfluenceWHAT IT DOES
RTH Breaks classifies each trading day at the 9:30 AM ET open into one of three scenarios based on where price opens relative to yesterday's Regular Trading Hours (RTH) range:
- Gap Up: RTH opens above prior RTH high
- Gap Down: RTH opens below prior RTH low
- Inside Day: RTH opens within prior RTH range
It then checks the midnight open (00:00 ET) as a confluence filter to determine whether the overnight session confirms or conflicts with the day's scenario. The combination produces a directional bias with a conviction rating.
LEVELS PLOTTED
- Prior RTH High and Low (horizontal lines)
- Prior RTH Midline (midpoint of yesterday's RTH range)
- Midnight Open (00:00 ET price)
- Prior RTH Session Box (shaded rectangle showing yesterday's 9:30-16:00 range)
- Current RTH Session Box (developing box for today's session)
All levels, labels, boxes, and styles are fully configurable through inputs.
HOW THE CONFLUENCE WORKS
The indicator evaluates midnight alignment for each scenario:
Gap Up days:
- Midnight above prior RTH high = confirms (overnight participated in the breakout)
- Midnight in the upper half of prior range = neutral (overnight leaned bullish)
- Midnight below midline = conflicts (overnight did not participate)
Gap Down days:
- Midnight below prior RTH low = confirms
- Midnight in the lower half = neutral
- Midnight above midline = conflicts
Inside days:
- Both RTH open and midnight on the same side of the midline = confirms (double confirmation)
- RTH open and midnight on opposite sides = conflicts
CONVICTION LEVELS
Based on the alignment, the indicator assigns a conviction:
- HIGH: Midnight confirms the scenario. Strongest directional edge.
- MODERATE: Gap down with neutral midnight. Edge exists but thinner.
- REDUCED: Inside day with midnight conflict. Bias drops significantly.
- SKIP: Gap up with midnight conflict. Reversal risk is elevated.
- LOW: Gap down with midnight conflict.
- MAGNET: Inside day where midnight is parked near the opposite pRTH boundary (within 20% of range). The midline directional bias is overridden -- the indicator flips direction toward the boundary midnight is near.
THE MAGNET OVERRIDE (INSIDE DAYS)
On inside days, when the RTH open and midnight conflict AND midnight is within 20% of the pRTH range from the opposite boundary, the midline bias is neutralized. For example: RTH opens above the midline (normally bullish), but midnight sits near the prior RTH low. The standard 2.9x long bias drops to approximately 1.0x. The indicator detects this and flips the direction toward the magnet boundary.
This effect was observed consistently on NQ and ES. GC (Gold) is less affected by the magnet override due to stronger trend persistence.
THE TABLE
A confluence table displays:
- Scenario classification (Gap Up / Gap Down / Inside)
- RTH open position vs midline
- Midnight position vs midline
- Alignment status (confirms / conflicts)
- Conviction level
- Directional bias (Long / Short)
- Edge description
- Breakout probability (inside days: 81-84% break at least one boundary)
- Magnet warning (when applicable)
The table supports Dark, Light, Transparent, and Custom themes.
METHODOLOGY AND BACKTEST BASIS
The conviction levels, directional statistics, and magnet override thresholds are derived from a cross-asset probability study:
- Instruments: NQ (Nasdaq 100), ES (S&P 500), GC (Gold)
- Period: 2016 to 2026 (10 years)
- Total trading days analyzed: approximately 5,700
- Data: 1-minute bars, New York timezone
- RTH definition: 9:30 AM to 4:00 PM ET
Key findings from the study:
Gap days: When the RTH open gaps outside yesterday's range and midnight confirms the gap direction, 67-80% of days close on the gap side. When midnight conflicts, reversal rates increase from 8-16% to 19-35% depending on instrument.
Inside days: When both RTH open and midnight are on the same side of the midline, the directional bias ratio is 2.4x to 3.5x toward the nearer boundary. When they conflict, the ratio drops to 1.6x to 2.9x.
Magnet override: When midnight is within 20% of range from the opposite boundary on a conflict day, the bias ratio drops to approximately 1.0x on NQ (effectively flat). This was tested across multiple threshold levels (10%, 15%, 20%, 25%, 30%) and the effect was stable.
Boundary containment: 86-93% of gap up days never breach the prior RTH low. 87-93% of gap down days never breach the prior RTH high. This containment rate improves when midnight confirms.
HOW TO USE IT
1. Apply the indicator to any intraday chart (1-minute to 60-minute) of NQ, ES, or GC futures.
2. Before or at 9:30 AM ET, the table displays "waiting" until the RTH open classifies the day.
3. At the RTH open, check the Scenario, Direction, and Conviction fields.
4. HIGH conviction with a clear direction = strongest setup. SKIP or LOW = elevated risk.
5. On inside days, watch for the MAGNET conviction -- this overrides the midline direction.
6. Use the prior RTH high/low as targets and the midline as a reference for position within the range.
The indicator works on any instrument with US RTH hours (9:30-16:00 ET), but the statistical edge descriptions in the table are calibrated for NQ, ES, and GC. On other instruments, a note appears in the table header.
INPUTS
Levels: Toggle pRTH High/Low, Midline, Midnight Open, and Labels independently. Label size is configurable.
Session Boxes: Toggle prior RTH and current RTH session boxes. Box fill and border colors are configurable.
Line Style: Width and style (Solid/Dashed/Dotted) for each level type.
Table: Position (four corners), size, and theme (Dark/Light/Transparent/Custom with full color control).
Colors: Independent color inputs for High, Low, Midline, Midnight, Bullish signals, and Bearish signals.
TIMEFRAME RESTRICTION
This indicator is restricted to intraday charts of 60 minutes or less. Higher timeframes (2H, 4H, Daily) smear session boundaries and produce unreliable midnight anchoring. The indicator will display an error if applied to an unsupported timeframe.
ALERTS
Six alert conditions are available:
- Gap Up HIGH conviction
- Gap Up SKIP
- Gap Down HIGH conviction
- Gap Down LOW conviction
- Inside Day Double Confirm (HIGH)
- Inside Day Conflict (REDUCED)
- Inside Day Magnet Override
All alerts fire at the RTH open bar (9:30 AM ET).
Indicator
PRO Investing - Nasdaq Silver Bullet (%) Strategy (1hr)
Nasdaq Silver Bullet H1 Macro-Trend Strategy
Overview
The Nasdaq Silver Bullet H1 Strategy is a high-timeframe adaptation of the classic "Silver Bullet" concept. While most institutional time-window strategies are used for scalping, applying this logic to the 1-Hour (H1) chart transforms it into a Session Momentum Strategy.
Instead of chasing small price fluctuations, this script identifies the "Power Hour" (10:00 AM EST) candle as the directional anchor for the rest of the New York session. It filters out market noise by requiring the higher-timeframe trend to align with the mid-morning institutional expansion.
Key Features (H1 Optimization)
1. The "Power Hour" Anchor (10:00 AM EST)
On the 1-Hour chart, the 10:00 AM candle represents the most critical hour of Nasdaq trading—the crossover between the London Close and the New York Morning. This script uses that specific H1 candle to determine if the "Smart Money" is positioning for a trend continuation or a reversal.
2. Multi-Hour Momentum Confirmation (Candle Counting)
On the H1 timeframe, the Candle Count logic becomes a powerful trend-validation tool.
If set to 2, the strategy waits for the 10:00 AM and 11:00 AM candles to both close in the same direction.
This ensures you aren't entering on a "fake" spike, but rather on a sustained multi-hour move that has a high probability of carrying through to the New York afternoon.
3. Macro-Trend Filter (200 EMA)
Using the 200 EMA on the 1-Hour chart provides a "Bird's Eye View" of the market. This filter ensures that the strategy only takes long trades during established bull markets and short trades during bear markets, preventing "counter-trend" traps that often occur during volatile session opens.
4. Volatility-Agnostic Risk Management (%)
Because Nasdaq’s 1-Hour candles can range from 50 to 300 points depending on the day's volatility, fixed point targets are ineffective. This script uses Percentage-Based Stop Losses and Take Profits.
On the H1 chart, this allows the strategy to capture large "trend days" while maintaining a mathematically consistent risk-to-reward ratio regardless of the Nasdaq’s current price level.
Strategy Logic for H1 Usage
Observation: The script identifies the 10:00 AM H1 candle (highlighted by the blue window).
Confirmation: It checks if the current 1-Hour trend matches the 200 EMA baseline.
The Trigger: Once the required number of H1 candles (e.g., 2) have closed in a consistent direction starting from the Silver Bullet window, a trade is executed.
The Exit: The trade is managed by percentage targets or is automatically flattened at the end of the window to avoid "Overnight Risk" or "After-Hours" chop.
Best Use Case
Asset: NQ1! (Futures), MNQ1! (Micro Futures), or US100.
Timeframe: 1-Hour (H1).
Market Context: Best suited for traders who want to capture the NY Session Continuation move. This strategy is excellent for avoiding "choppy" mornings and only entering once the true daily trend has been established by the 12:00 PM (EST) mark.
Summary for Traders
By moving the Silver Bullet to the 1H chart, you are trading the institutional flow of the day rather than the volatility of the minute. This leads to fewer trades, higher quality setups, and a significant reduction in "stop-hunts" that often plague lower-timeframe traders. Strategy
ORB Pro Suite v6ORB Pro Suite v6 — Multi-Session + HTF ORB Build
ORB Pro Suite v6 is an advanced Opening Range Breakout (ORB) tool designed for traders who want clarity, structure, and adaptability across NY, London, and Asia sessions — without changing the core ORB logic that works.
This update expands the original ORB Pro Suite to support overnight markets and multi-timeframe workflows, while keeping the strategy behavior consistent and familiar.
✅ Multi-Session Presets
Choose from built-in session presets:
NY AM (RTH) — original behavior (unchanged)
London
Asia
Custom
Each preset aligns the ORB window with the selected session and pairs seamlessly with session-appropriate filters.
✅ ORB Build Mode
You now have two ways to build your ORB:
1️⃣ Time Window (Classic ORB)
Uses session start/end times
Identical to previous versions
2️⃣ HTF Candle Count (Advanced)
Build the ORB from 5m / 15m / 30m / 60m candles
Works on any chart timeframe
Ideal for traders who want ORB consistency across TFs
Example:
Build a 15-minute ORB from 1× 15m candle, even while trading on a 5m chart.
✅ Session Profile Defaults
ORB Pro Suite introduces Session Profiles that automatically tune filters for different market conditions — without changing the strategy logic.
Profiles include:
NY (Default)
London (Breakout)
Asia (Slow Session)
Custom
You can toggle Profile Defaults ON or OFF at any time.
🧠 Core ORB Logic (Unchanged)
Original ORB framework:
Opening range high/low
Breakout confirmation
Optional retest logic
Golden Pocket (0.5–0.618) validation
Local + higher-timeframe trend filters
Cooldown protection
Visual risk/reward mapping
If you traded NY with earlier versions, nothing has changed.
⚙️ Recommended Starting Settings
For most users:
ORB Build Mode: Time Window
Session Profile: Auto
Strictness: Balanced
Advanced users:
Enable HTF Candle Count
Select desired ORB TF (5m–60m)
Adjust candle count to match your style
All inputs remain fully customizable.
📊 Designed For
Futures (ES, NQ, YM, RTY)
Forex pairs
Gold & major indices
Intraday price-action traders
Session-based trading workflows
⚠️ Disclaimer
This indicator is for educational and informational purposes only.
It does not constitute financial advice or trade recommendations.
Trading involves risk. Always manage risk appropriately and trade responsibly. Indicator
Indicator
Synapse_VSync_LibV-Sync (Volume Synchronization) is a multi-dimensional macro-confluence engine. It aggregates four objective market truths into a single synchronized bias (0.0 to 1.0) to filter signals and define market regime.
The Four Pillars of V-Sync
1. Base Volume (Temporal Flux)
Engine: Exponentially weighted volume flow.
Logic: up_volume / total_volume with a math.exp(-i/lookback) decay.
Utility: Capturing sustained momentum in raw participation. It filters out low-volume "fakeout" moves that lack broad participation.
2. Footprint (Order Flow Delta)
Engine: Micro-delta tracking (Institutional Tape).
Logic: Normalized ratio of aggressive buy orders vs sell orders, sourced from LTF footprint or synthetic body-to-wick estimation.
Utility: Identifying where "Smart Money" is actively committing capital in real-time.
3. TICK Data (Market Internals)
Engine: Exchange-wide breadth internals.
Index Mapping:
SPX/ES: NYSE:TICK
NQ/NDX: NASDAQ:TICKQ
Fidelity: Processes intrabar HT/LT extremes to capture high-speed institutional sweeps.
Commitment Levels: Benchmarked at 800 (MOO alignment), 1000 (Extreme), and 1200 (Climax).
4. Thermal Map (Structural Binning)
Engine: Range-based volume distribution (Heatmap).
Logic: 30-bin price-range analysis. Identifies if the current price is supported by "Buy Liquidity" below or capped by "Sell Liquidity" above.
Utility: Visualizing structural depth and identifying high-probability zones where price is likely to stick or bounce.
Interaction & Intelligence Modules
5. Interaction Tooltips
Engine: Dynamic string generator.
Logic: Aggregates pillars (V-Sync, TICK, Heatmap) and local interaction (Delta, OB Bias) into a human-readable forensic report.
Utility: Provides instant clarity on why a level is reacting (e.g., "Institutional Defense" vs "Passive Absorption").
6. Delta Aggregation (Defense vs Aggression)
Engine: Decaying session delta sum.
Logic: Tracks footprint delta at discrete price levels. Categorizes bias as:
Aggressive (A): Delta moves in the direction of the break (Push).
Defensive (D): Delta moves against the local price interaction (Absorption/Soaking).
Utility: Standardizing the interpretation of footprint across all Synapse indicators.
7. Universal Plot Auditing
Engine: Kinetic flux interaction logic.
Logic: Allows auditing of any technical plot line (Moving Averages, VWAP, Anchored Levels) for touches, cross-overs, and structural fidelity.
Utility: Enables the entire Synapse forensic suite to be applied to any existing indicator's data lines.
Library Architecture: Synapse_VSync_Lib
Key Functions
f_get_tick_source(): Auto-detects SPX vs NQ for correct internal sourcing.
f_calc_tick_extreme(): High-fidelity internal pressure tracking.
f_vsync_stack(): Blends all pillars into a weighted consensus.
HUD Representation
Indicators utilizing the full stack display V-STACK (instead of V-SYNC), signifying that Market Internals and Structural structural depth are being calculated alongside volume flow.
License: Open Source (MIT License) Library
GEX Levels for NQ/NDX/QQQ Gamma ExposureDESCRIPTION
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
A professional framework for Gamma Exposure analysis on NASDAQ-100 instruments.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHAT THIS INDICATOR DOES
This indicator visualizes key strategic levels derived from Gamma Exposure (GEX) analysis — the zones where dealer hedging flows create measurable support and resistance.
What you see:
- Call Walls — resistance zones where dealers hedge against upside
- Put Walls — support zones where dealers hedge against downside
- Zero Gamma — the structural pivot between mean-reversion and trend
- Expected Move bands — statistical range boundaries
- GEX Histogram — gamma distribution profile directly on chart
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WORKS OUT OF THE BOX
The indicator ships with pre-loaded 5DTE weekly GEX levels — add it to your chart and you'll see levels immediately. No setup, no copy/paste needed. We refresh the built-in data every week.
If you have access to more frequent data (0DTE, intraday), paste it into the GEX Data field in settings — your data always takes priority. Clear the field to fall back to the built-in weekly levels.
Pre-loaded PDH/PDL reflect the session at time of update. Fresh daily structure levels require pasting updated data.
Daily 0DTE data updates available soon via invite-only version — DM for early access.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
KEY FEATURES
▸ Ticker Switcher
Select NQ, NDX, or QQQ directly in settings.
Data converts automatically (NQ-NDX spread: 40 pts, QQQ ≈ NDX/40).
One script, three instruments.
▸ GEX Profile Histogram
See gamma distribution as horizontal bars on your chart.
Instantly spot where positioning clusters.
▸ Color Themes
Choose between Boreal, Classic, or Lady Trader palettes.
▸ Level Toggles
Show/hide level groups independently:
GEX Levels | System Levels | Structure Levels
▸ Rich Tooltips
Hover for details: GEX values, Call/Put ratio, Hold/Break probabilities.
▸ Flip Detection
When price crosses a level, it automatically updates role and style (solid → dashed).
▸ GEX Threshold Filter
Hide weak levels below a minimum magnitude to focus on significant zones.
▸ Smart Level Distribution
Levels are equally split above/below spot, with closest levels always protected from max limit.
▸ Alert System
Get notified when price crosses key GEX levels. Alerts are pre-configured for the built-in 5DTE levels.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO READ THE LEVELS
Each line represents a zone where price reaction is statistically probable:
- Thick solid lines = level not yet crossed
- Dashed lines = level flipped (price crossed through)
- Cyan/Teal or Green = potential support (Put Walls)
- Pink/Red = potential resistance (Call Walls)
- Gray = structural levels (Zero Gamma, Vol Bands, PDH/PDL)
The indicator shows structure, not predictions.
Use it to identify where the market is likely to react — not which direction it will go.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PRO TIP: CONFLUENCE
This tool is most powerful when combined with your own analysis.
Highest-probability setups occur when GEX levels align with:
Price action zones (support/resistance, order blocks)
Volume Profile (HVN/LVN, VWAP)
Technical structure (prior highs/lows, trend lines)
One level alone is information. Confluence is edge.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DISCLAIMER
This tool is for informational and educational purposes only.
It does not constitute financial advice. Trading involves significant risk.
Past structure does not guarantee future behavior.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DATA FORMAT REFERENCE (for DIY users)
The GEX Data input field accepts a formatted string: L:levels|P:profile
— L: section = level lines on the chart
— P: section = GEX profile bars (horizontal histogram)
— Separated by |P:
LEVELS (L: section):
strike,type,label,tooltip,magnitude — separated by semicolons
— strike: price in NQ terms (integer)
— type: CW (Call Wall), PW (Put Wall), ZG (Zero Gamma), MP (Max Pain), EH/EL (Expected Move), VH/VL (Vol Bands), PDH/PDL/PWH/PWL (Structure)
— label: display name
— tooltip: hover text (use ~ for line breaks)
— magnitude: GEX in millions (0 for non-GEX levels)
PROFILE (P: section):
strike,score,sign — separated by semicolons
— score: -10 to 10
— sign: 1 = call-dominant, -1 = put-dominant
DIY workflow:
— Get a delayed options chain (any broker or public data provider)
— Filter to target expiry
— For each strike: Gamma via Black-Scholes, then GEX = Gamma × OI × 100 × Spot²
— Rank by magnitude, normalize scores 0-10
— Paste into Settings → GEX Data
Latest Levels Update 2026-03-08 - 5DTE Exp Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Advanced Confluence DashboardAdvanced Confluence Dashboard - Multi-Indicator Technical Analysis Tool
OVERVIEW
The Advanced Confluence Dashboard is a comprehensive technical analysis tool designed to help traders identify high-probability trade setups by tracking multiple technical indicators simultaneously. The indicator displays up to 13 different technical confluences in an easy-to-read dashboard format, providing both individual signals and an overall market bias percentage. Switch between full table view and condensed view for maximum chart flexibility.
FEATURES
- 13 Technical Confluences: RSI, VWAP, EMA Cross (9/21), MACD, Stochastic, Trend (50 EMA), Bollinger Bands, ADX Strength, Price Momentum, Volume Breakout, VWAP Bands, 200 EMA, and Price Action (Higher Highs/Lower Lows)
- Real-time Confluence Scoring: Automatically calculates bullish vs bearish signal strength
- Multi-Timeframe Support: Analyze indicators on any timeframe while viewing your chart on another
- Customizable Display: Toggle individual indicators on/off, adjust table position, size, and transparency
- ATR Information: Optional ATR display for volatility-based position sizing
- Condensed View Mode: Ultra-minimal display showing only confluence score and ATR (perfect for scalpers who want maximum chart visibility)
- Full Table View: Detailed breakdown of each indicator's value and signal
- Color-Coded Signals: Green (bullish), red (bearish), white (neutral) for instant visual clarity
HOW IT WORKS
The indicator evaluates each enabled technical indicator and assigns it either a bullish or bearish signal based on its current state. The confluence score shows how many indicators are aligned in each direction, giving you a clear percentage-based view of market bias. For example, if 8 out of 13 indicators are bullish, you'll see a 62% LONG BIAS signal.
DISPLAY MODES
Full View: Shows all enabled indicators with their current values and signals in a detailed table format. Perfect for understanding exactly which indicators are bullish or bearish and why.
Condensed View: Shows only the confluence score (e.g., "4/13 LONG | 9/13 SHORT - SHORT BIAS 69%") and optional ATR information. This minimal display keeps your chart clean while still providing the essential confluence data you need for quick trading decisions. Ideal for scalpers and traders who want maximum chart space.
CONFLUENCES EXPLAINED
- RSI: Momentum oscillator (>50 bullish, <50 bearish, shows overbought/oversold)
- VWAP: Volume-weighted average price (above = bullish, below = bearish)
- EMA Cross: Fast EMA (9) vs Slow EMA (21) with price position
- MACD: Trend-following momentum (line above signal = bullish)
- Stochastic: Momentum oscillator (>50 bullish, <50 bearish)
- Trend (50 EMA): Price position relative to 50-period EMA
- Bollinger Bands: Volatility and mean reversion (above middle = bullish)
- ADX Strength: Trend strength indicator (shows strong trends)
- Price Momentum: Rate of price change over specified period
- Volume Breakout: Detects unusual volume with directional bias
- VWAP Bands: Standard deviation bands around VWAP
- 200 EMA: Long-term trend indicator
- Price Action: Higher Highs and Lower Lows pattern detection
SETTINGS
Timeframe Settings:
- Indicator Timeframe: Analyze indicators on a different timeframe than your chart
Display Options:
- Condensed View: Toggle between full table and minimal display
- Show ATR Info: Display/hide ATR information
- Table Position: 9 positions (top/middle/bottom + left/center/right)
- Text Size: Auto, tiny, small, normal, large, huge
- Table Transparency: 0-100%
- Border Width: 1-5 pixels
Confluence Toggles:
- Enable/disable any of the 13 confluences individually
- Confluence score automatically adjusts based on enabled indicators
Indicator Settings:
- RSI Length (default: 14)
- ATR Length (default: 14)
- Fast/Slow EMA (default: 9/21)
- Trend EMA (default: 50)
- Volume SMA Length (default: 20)
- Volume Breakout Multiplier (default: 2.0x)
- Bollinger Bands Length/StdDev (default: 20/2.0)
- ADX Length (default: 14)
- ADX Strength Threshold (default: 25)
- Momentum Length (default: 10)
IDEAL USE CASES
- Scalping: Quick identification of confluence for fast entries/exits - use condensed view for clean charts
- Day Trading: Multi-timeframe analysis for intraday setups
- Swing Trading: Confirmation of longer-term bias
- Risk Management: Higher confluence = higher probability trades
- Trade Filtering: Only take trades when confluence reaches your threshold
- Multi-Monitor Setups: Use condensed view on execution charts, full view on analysis charts
HOW TO USE
1. Add the indicator to your chart
2. Toggle on/off the confluences you prefer to use
3. Choose between Full View (detailed) or Condensed View (minimal)
4. Adjust the table position and size to your preference
5. Look for high confluence percentages (70%+ is strong bias)
6. Use the individual indicator signals (full view) to understand market structure
7. Combine with your trading strategy for entry/exit confirmation
TIPS
- Use Condensed View when scalping to keep your chart clean and uncluttered
- Switch to Full View when you need to analyze which specific indicators are conflicting
- Higher confluence doesn't guarantee success - always use proper risk management
- Consider using 60%+ confluence as a minimum threshold for trades
- Pay attention to which specific indicators are aligned vs conflicting
- Use the ATR display for quick reference on position sizing
- Experiment with different timeframes to find what works for your style
- Disable indicators you don't use to simplify your confluence scoring
DISCLAIMER
This indicator is for educational and informational purposes only. It does not constitute financial advice, investment advice, trading advice, or any other type of advice. Trading and investing in financial markets involves substantial risk of loss and is not suitable for every investor. Past performance is not indicative of future results. Always do your own research and consult with a qualified financial advisor before making any investment decisions. Indicator
