VASA Multi-Timeframe Rating vFStop flipping between charts to check whether the higher timeframes agree. This puts three timeframes in one small table on your chart. For each one it reads trend (fast EMA vs slow EMA) and momentum (RSI above or below 50), then sums them into a plain rating: Bull, Lean bull, Mixed, Lean bear, or Bear.
What it does: • Three configurable timeframes (default 15m / 1h / 4h) • Trend and momentum column per timeframe • A fused rating cell, colour-coded • Reads higher timeframes without repainting — on the live bar it uses the last closed higher-TF bar, so the table doesn't flicker intrabar
How to use: look for agreement. When all three lean the same way, you're trading with the broader context instead of against it. When they disagree ("Mixed"), that's your signal to size down or stand aside. Change the three timeframes to match how you actually trade — a scalper might run 1m/5m/15m, a swing trader 1h/4h/1D.
Educational only — not financial advice. Trading involves substantial risk of loss.
Indicator
Indicator
Indicator
Indicator
Indicator
R-Multiple Progress Map [AGPro Series]R-Multiple Progress Map
🧠 Core Idea
How far has the active move progressed in R terms, and is that progress still healthy enough to monitor?
📌 Overview / What it does
R-Multiple Progress Map is a chart-first trade management overlay that tracks a setup after activation and converts price movement into R-multiple progress.
Instead of acting like a risk/reward calculator, a position sizing tool, or a take-profit promise system, the script focuses on what happens after an active cycle begins. It maps an entry proxy, invalidation proxy, R ladder, current R marker, partial-review bands, pullback-risk state, and a clean AGPro progress panel.
The script does not predict future price movement, place orders, automate trade management, or tell the user what to buy or sell. It is a structured progress-reading layer for discretionary review.
🎯 Purpose & Design Philosophy
This script was built for traders who think in R-multiples but need a cleaner way to read progress quality after a setup becomes active.
Many tools help plan the trade before activation. Fewer tools focus on the management question after activation: is the move actually making progress, is pullback pressure increasing, where is the next R review zone, and what should the user pay attention to now?
The design supports a decision-engine mindset: measure progress, evaluate health, and keep the chart readable without turning it into a crowded signal board.
⚡ Why This Script Is Different
Most tools focus on drawing entry, stop-loss, and take-profit levels before a trade begins.
This script does NOT try to become a full position planner, risk/reward visualizer, position-size calculator, or target ladder.
Instead, it starts from an activated progress cycle and evaluates the move in R terms. The unique output is not a trade instruction. It is a live progress state that separates ACTIVE, BUILDING, PROGRESSING, EXTENDED, PULLBACK RISK, STALLED, INVALIDATED, and WAIT conditions.
⚙️ Methodology
1. Context Detection
The script detects activation using range-break and trend-pulse logic, or allows the user to restrict the map to long-only or short-only progress context.
2. Reference Mapping
When a progress cycle activates, the script stores an entry proxy, invalidation proxy, R-risk unit, active side, active bar, maximum favorable R progress, and adverse R pressure.
3. Reaction Evaluation
The model evaluates R expansion, candle progress, trend support, drawdown pressure, time efficiency, and volatility stability. These components are blended into a 0-100 progress score.
4. Visual Output
The output is shown through an R ladder, centered partial-review bands, live progress fill, current R marker, event labels, alerts, and a compact AGPro panel.
🗺️ How to Read the Chart
Zones = partial-review R bands between key R levels, such as 0.5R-1R, 1R-2R, and 2R-3R.
Labels = activation, R milestone, pullback-risk, stalled-progress, and invalidation markers.
Colors = bullish progress, bearish progress, warning states, and neutral states use the AGPro color language.
Panel = the panel summarizes Current R, Progress Grade, Pullback Risk, Next R Zone, and Action.
🚦 Signals & States
• ACTIVE → a new progress cycle has activated and early R progress is being measured.
• BUILDING → price has started to make useful R progress but is not yet strong enough for a higher-grade state.
• PROGRESSING → the move has reached meaningful R progress with supportive score conditions.
• EXTENDED → progress is advanced and the next R zone deserves review.
• PULLBACK RISK → price has given back enough favorable R progress to deserve caution.
• STALLED → the active cycle has spent time without enough R progress.
• INVALIDATED → the active cycle touched the invalidation proxy.
• WAIT → no active progress cycle is currently being tracked.
🔔 Alerts Logic
Alerts trigger when a new progress cycle activates, when 0.5R, 1R, or 2R progress is reached, when pullback risk increases, when progress stalls, or when the invalidation proxy is touched.
These alerts are attention markers. They are not trade instructions, entry signals, exit signals, or automated strategy commands.
🧩 Confluence Logic
The strongest progress context appears when multiple components align:
R expansion + strong candle progress + trend support + controlled pullback drawdown + efficient timing + stable volatility.
When these components align, the script can classify the active move as PROGRESSING or EXTENDED. If drawdown pressure rises or time efficiency weakens, the state can shift toward PULLBACK RISK or STALLED.
📊 When to Use
• After a breakout or continuation attempt has activated
• While monitoring whether a setup is progressing in clean R terms
• During discretionary trade management review
• When comparing whether a move is building, stalling, or extending
• When the user wants chart-first R progress without a full position-size calculator
⚠️ When NOT to Use
• Extremely low-liquidity symbols
• Very noisy micro-timeframes with unstable wick behavior
• News-driven volatility spikes
• Markets where recent structure cannot define a useful invalidation proxy
• Situations where the user expects a complete risk/reward planning suite
🎛️ Key Inputs
• Progress Side → controls Auto, Long Progress, or Short Progress evaluation.
• Activation Mode → chooses Range Break, Trend Pulse, or Hybrid activation logic.
• Structure Lookback → defines the activation and context window.
• Invalidation Proxy Lookback → maps the R-risk reference used for progress normalization.
• Minimum Activation Score → controls how selective new progress cycles are.
• Pullback Risk R → defines how much R drawdown triggers caution.
• Visual settings → control R ladder, partial-review bands, progress fill, labels, panel location, theme, and font sizes.
🖥️ Interface & Visual Design
The interface is built around one primary idea: R progress after activation.
The R ladder and partial-review bands keep the chart visually informative, while the panel keeps the decision state compact and readable.
Labels are offset away from candles, limited by maximum count, and controlled with cooldown and sparse context settings for a balanced public-release chart.
🧪 Practical Usage Workflow
1. Read the panel action state.
2. Check the current R and maximum R progress.
3. Review whether pullback risk is low, moderate, or high.
4. Look at the next R zone for management context.
5. Treat alerts as attention markers and confirm the broader market context independently.
🔍 Interpretation Guidelines
A higher progress score means the active move is showing stronger alignment between R expansion, trend support, drawdown control, time efficiency, and volatility stability.
PROGRESSING does not mean a trade should be opened or held. It means the active cycle is showing healthier R progress under the script's rule set.
PULLBACK RISK and STALLED are caution states. They help identify when progress may be weakening after an active move has already started.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an auto-trading system.
It does not provide guaranteed signals.
It is not a full position planner, risk/reward visualizer, or position-size calculator.
⚠️ Limitations & Transparency
Timeframe differences can change activation behavior and invalidation proxy placement.
Volatility changes can alter ATR-normalized risk and R-progress readings.
Market structure can shift quickly after news, low-liquidity movement, or aggressive momentum expansion.
The script is rule-based and should be interpreted as an analytical progress layer, not as certainty.
🧠 Market Context Notes
R progress is not only about distance from activation. It also depends on how much progress is being retained, whether trend context still supports the active side, and whether time spent in the setup is becoming inefficient.
The tool is most useful when it helps the user review an active move with discipline instead of reacting emotionally to each candle.
🧾 Use Case Examples
When a trend-pulse activation reaches 1R with strong score conditions and low drawdown, the script may classify the move as PROGRESSING.
When a move reaches 2R but begins giving back a meaningful amount of favorable progress, the script may show PULLBACK RISK.
When a cycle stays active for many bars without reaching useful R progress, the script may show STALLED.
🧱 System Philosophy
R-Multiple Progress Map follows the AGPro Series decision-engine approach:
Progress after activation.
Risk measured in R.
Management context before emotion.
Attention markers instead of promises.
🔐 Non-Promise Statement
No script can guarantee that R progress will continue.
No state should be interpreted as certainty.
All outputs should be reviewed within broader market context.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own decisions, risk management, and trade execution.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
The script is designed to help users think in structured R-progress terms: activation, progress, pullback, stall, invalidation, and review.
Indicator
Breakeven Review Planner [AGPro Series]Breakeven Review Planner
🧠 Core Idea
Has the move progressed enough to review breakeven protection, or is the context still too early, weak, or exposed?
📌 Overview / What it does
Breakeven Review Planner is a trade-management overlay designed to evaluate post-activation move progress. Instead of asking users to manually draw a full entry, stop, and take-profit plan, the script detects a qualified directional move, anchors an activation reference, builds a structural invalidation shelf, and measures live R progress from that context.
The output is a clean breakeven review workflow: a BE review zone, activation reference, invalidation shelf, current R reading, trend-support state, pullback-risk state, event labels, alerts, and a premium AGPro panel.
It does not predict price direction, place trades, calculate position size, build a take-profit ladder, or tell users to move a stop. Alerts and labels are attention markers for review context only.
🎯 Purpose & Design Philosophy
This script was built for traders who already manage active moves and need a cleaner way to evaluate whether the move has earned a breakeven review.
The gap it fills is not pre-trade risk/reward planning. AGPro already has tools for that. This script focuses on the management phase after a move is active: progress, structure, trend support, and pullback risk.
The design supports a disciplined review mindset. It helps users read whether the chart has built enough progress to deserve attention without turning that review into an automated instruction.
⚡ Why This Script Is Different
Most risk/reward tools focus on manual entry, stop-loss, targets, position sizing, and breakeven probability.
This script does NOT build a full trade plan, does NOT create TP ladders, and does NOT tell users to move a stop.
Instead, it watches the live chart for a qualified management context, scores the move's progress toward a breakeven review threshold, and keeps the user focused on whether the current structure is strong, weak, stale, or invalidated.
⚙️ Methodology
1. Context Detection
The script detects directional activation when price escapes recent structure with enough ATR-normalized impulse, candle commitment, close-location quality, and trend support.
2. Reference Mapping
After activation, the script anchors an activation reference and builds an invalidation shelf from the latest confirmed swing plus an ATR buffer.
3. Reaction Evaluation
The engine measures current R, best favorable R, trend support, candle quality, volatility fit, and pullback depth after progress.
4. Visual Output
The chart displays the BE review zone, progress fill, context lines, event labels, candle tint, alerts, and the AGPro panel.
🗺️ How to Read the Chart
Zones = the BE review area around the configured R trigger. It is a review zone, not a command.
Labels = context markers such as armed context, progress milestones, BE review, pullback watch, stale context, and invalidation.
Colors = teal for bullish-supported context, pink for bearish or invalid context, amber for caution, and indigo for breakeven review focus.
Panel = the current decision cockpit. It shows Review Score, Current R, BE Trigger, Progress State, Trend Support, and Action.
🚦 Signals & States
• Bull Context Armed → a bullish management context was activated after structure escape.
• Bear Context Armed → a bearish management context was activated after structure escape.
• BE Review Active → current progress reached the configured R threshold for breakeven review.
• Review + Pullback → price reached review progress but has pulled back enough to require closer attention.
• Stale → the context spent too many bars without enough progress.
• Invalidated → price reached the structural invalidation shelf.
🔔 Alerts Logic
Alerts trigger when a new management context activates, the BE review zone is reached, the review quality is high, pullback risk increases after review progress, the invalidation shelf is reached, or the context becomes stale.
Alerts are attention markers. They are not trading instructions, broker actions, or automated stop-management commands.
🧩 Confluence Logic
The strongest review context appears when R progress, trend support, candle close quality, controlled pullback depth, and normal volatility fit align.
When these conditions align, the Review Score rises and the panel state becomes easier to interpret.
📊 When to Use
• Active directional moves after structure expansion
• Trend continuation environments
• Breakout follow-through review
• Trade-management review after favorable progress
• Charts where users want R-style context without a full manual RR planner
⚠️ When NOT to Use
• Very low-liquidity symbols
• Extremely noisy ranges
• News shock candles with distorted ATR behavior
• Non-standard chart types that alter candle structure
• Situations where the user needs exact broker-level stop management
🎛️ Key Inputs
• Sensitivity → changes how quickly or strictly the script activates a management context.
• Structure Lookback → controls the recent structure boundary used for activation.
• BE Review Trigger (R) → sets the R threshold for review-zone activation.
• Invalidation Shelf Buffer ATR → controls how much ATR padding is added beyond the latest swing.
• Pullback Warning Depth (R) → controls when post-review pullback risk is marked.
• Visual settings → control labels, zones, progress fill, line extension, candle tint, and object limits.
• Panel settings → control panel visibility, location, theme, and font size.
🖥️ Interface & Visual Design
The panel follows the AGPro public-release standard with one merged blue header row containing only the script name.
The chart is designed to stay active but not crowded. It uses a single review zone, clean context lines, a subtle progress fill, and capped event labels.
Label and panel font sizes are adjustable, with Normal as the default.
🧪 Practical Usage Workflow
1. Read the panel Review Score and Progress State.
2. Check whether price is below, inside, or beyond the BE review zone.
3. Compare Current R with best favorable R to understand whether progress is expanding or pulling back.
4. Confirm whether trend support is still aligned.
5. Treat alerts as review prompts, not as automated trade actions.
🔍 Interpretation Guidelines
A high score means the move has progressed toward the review zone with stronger internal structure according to the script's rules.
A low score means the move is early, weak, stale, pulling back, or structurally invalidated.
The most useful interpretation comes from reading score, state, trend support, and invalidation together instead of relying on a single label.
🚫 What This Script Is NOT
• Not a prediction engine
• Not financial advice
• Not auto trading
• Not guaranteed signals
• Not a position sizing calculator
• Not a manual risk/reward visualizer
• Not a take-profit planner
⚠️ Limitations & Transparency
The activation model is rule-based and depends on recent structure, ATR, candle behavior, and trend filters.
Different timeframes can produce different activation references and invalidation shelves.
Fast volatility expansion can make R progress move quickly, while low volatility can keep contexts stale.
No rule-based tool can know a user's actual broker order, risk tolerance, or execution plan.
🧠 Market Context Notes
Breakeven review is most useful when progress, structure, and volatility are read together.
A move can reach a review zone while still having weak trend support or heavy pullback risk.
The script is designed to keep those differences visible.
🧾 Use Case Examples
When price breaks recent structure, trend support is aligned, and current R approaches the BE review threshold, the panel may shift from Building to Approaching Review.
When current R reaches the configured BE trigger and the score is strong, the script marks the review zone and can trigger a high-quality review alert.
When best favorable R was strong but current R pulls back by the configured amount, the script marks Pullback Watch instead of treating the move as automatically healthy.
🧱 System Philosophy
The AGPro approach is to turn chart information into structured decision context.
This script follows that philosophy by converting move progress into a clean review framework: activation, invalidation, R progress, trend support, pullback risk, and next review state.
🔐 Non-Promise Statement
This script does not provide certainty.
It does not guarantee that a breakeven review will improve trade outcome.
It only organizes the conditions that may make breakeven review context more visible.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, execution, risk management, and decisions.
This script is for educational and analytical purposes only and does not provide financial advice.
📚 Educational Note
Use the tool to study how active moves progress, stall, pull back, or invalidate around a structured management threshold.
Indicator
Take Profit Planner [AGPro Series]Take Profit Planner
🎯 **Overview**
**Take Profit Planner ** is a precision exit-planning tool that transforms trade management from guesswork into a structured process. It builds a disciplined profit ladder around any trade idea — whether you are a scalper managing rapid exits or a swing trader stepping out of positions over days — and keeps the entire plan on one chart with live progress tracking.
Most traders agonize over entries and leave exits to improvisation. This tool flips that habit: define your anchor, choose your calculation style, and the script projects a complete multi-tier exit map with stop loss, position-sizing allocation, confluence scoring, and real-time hit tracking.
🪜 **What Makes It Different**
Unlike conventional take-profit indicators that plot a single ATR-based target or fixed R:R pair, this tool offers a **multi-layer exit architecture**:
▫️ **Three Calculation Modes** — Fibonacci Extensions, R-Multiples, or Hybrid Confluence in a single tool
▫️ **Three Anchor Sources** — Manual price inputs, auto pivot detection, or recent S/R zone anchoring
▫️ **Confluence Scoring** — In Hybrid mode, every target receives a ★ / ★★ / ★★★ rating based on how many independent level types (Fib, round number, pivot S/R) cluster at that price
▫️ **Position-Sizing Layer** — Allocate a custom percentage of your position to close at each tier, with automatic weighted P&L calculation
▫️ **Live Progress Tracking** — Visual hit confirmation (✓), realized vs expected profit, and a six-state status ladder: ACTIVE → PROGRESSING → IN PROFIT → NEAR COMPLETE → ALL TPs HIT → STOPPED OUT
🧠 **Methodology**
▫️ **Anchor Detection** — The script identifies a trade's origin (Swing) and entry point using one of three methods. Auto Pivot uses a confirmable `pivothigh`/`pivotlow` with configurable length. Auto S/R uses the most recent swing extremes as structural anchor points. Manual lets you input exact prices.
▫️ **Direction Inference** — LONG or SHORT is determined automatically from the geometry: Entry above Swing → LONG, Entry below Swing → SHORT. No manual flag needed.
▫️ **Stop-Loss Logic** — Three modes: ATR Multiple (volatility-adaptive), Swing Point (structural), or Fixed Percent (disciplined). In Manual anchor mode, you set the stop directly.
▫️ **Target Projection** — Fibonacci mode projects targets from the Anchor→Swing leg using standard extensions (1.272, 1.414, 1.618, 2.000, 2.618). R-Multiple mode multiplies the stop distance by risk factors (1R, 2R, 3R, 5R, 8R). Hybrid uses Fibonacci as base and scores confluence.
▫️ **Confluence Algorithm** — For each Fibonacci target, the script checks proximity to: (1) the nearest psychological round number within 0.15 ATR, (2) the most recent pivot high within 0.2 ATR, (3) the most recent pivot low within 0.2 ATR. Each alignment adds one point to the base Fibonacci score.
▫️ **Hit Detection** — On every confirmed bar, the script checks whether price crossed each un-hit target. Hits are persistent until the anchor changes by more than 1 ATR, at which point the plan resets.
🔔 **Signals & Alerts**
▫️ **TP Hit** — Fires once per bar when price touches a specific target. Alert message includes tier number, price, and direction.
▫️ **SL Hit** — Fires once when stop-loss is breached.
▫️ **All TPs Reached** — Fires once when the full ladder is completed.
All alerts are non-repainting and trigger only on confirmed bars.
🎛️ **Key Inputs**
▫️ **Calculation Mode** — Fibonacci Extensions, R-Multiples, or Hybrid Confluence
▫️ **Anchor Source** — Manual Price, Auto Pivot High/Low, or Auto Recent S/R
▫️ **Pivot Length** — Bars of confirmation for automatic pivot detection (default 10)
▫️ **Stop-Loss Mode** — ATR Multiple, Swing Point, or Fixed Percent
▫️ **Number of TP Tiers** — 2 to 7 (default 5)
▫️ **Fibonacci / R-Multiple Levels** — Fully customizable per tier
▫️ **Allocation %** — Position-sizing percentage per tier
▫️ **Zone Half-Width (ATR)** — Vertical thickness of target zones in ATR units
▫️ **Panel Location & Theme** — Six positions, Dark or Light theme
▫️ **Label & Panel Font Size** — Tiny, Small, Normal, Large
💡 **How to Use**
▫️ **Scalper Workflow (Fast Exits)** — Set Calculation Mode to R-Multiples, tier count to 3, allocations to 50 / 30 / 20. Use Auto Pivot with pivot length 5–8 on lower timeframes. Exit weighted-partials at each R-level.
▫️ **Swing Trader Workflow (Multi-Day Holds)** — Set Calculation Mode to Hybrid Confluence, tier count to 5, allocations to 20 / 20 / 25 / 20 / 15. Use Auto Pivot with length 10–15 on 4H or daily. Prioritize exits at ★★★ confluence targets.
▫️ **Discretionary Trader Workflow** — Set Anchor Source to Manual Price, enter your own Entry, Swing, and SL values. Choose Fibonacci mode for trend-based projections or Hybrid for confluence-weighted decisions.
▫️ **Position Management** — The Expected line in the panel shows total profit % if all active tiers are filled (weighted by allocation). The Realized line tracks booked profit as tiers fill. Use this to compare planned vs actual performance.
⚠️ **Limitations & Transparency**
▫️ This is a **planning and visualization tool**, not an entry signal generator. It assumes you already have a trade bias; it structures the exit.
▫️ **Auto-anchor modes** rely on confirmed pivots, which means the most recent plan updates a few bars after a fresh pivot forms. This is intentional to prevent repainting.
▫️ **Confluence scoring** is based on the current snapshot of pivot highs/lows and round numbers. As price moves and new pivots form, scores may change.
▫️ **Hit detection** uses bar highs/lows on confirmed candles only.
▫️ The tool does not know your actual fill prices, slippage, or spreads — expected and realized percentages assume exact execution at target prices.
🛡️ **Risk Disclosure**
Trading involves substantial risk of loss and is not suitable for every investor. The information provided by this indicator is for educational and informational purposes only and does not constitute financial advice, a trading recommendation, or a solicitation to buy or sell any asset. Past performance does not guarantee future results. Always perform your own analysis, define risk before entering any trade, and use proper position sizing. The author and AGProLabs accept no liability for trading decisions made using this tool.
🔓 **Open Source**
This script is published open-source under the Mozilla Public License 2.0. You are welcome to study the methodology, build on it, and contribute feedback. Indicator
Risk Reward Visualizer [AGPro Series]Risk Reward Visualizer
🔹 Overview
Risk Reward Visualizer is a professional trade-planning indicator that transforms every setup into a clean visual framework: entry, stop-loss, and up to three take-profit targets displayed as long rectangular R-multiple zones. Beyond basic visualization, it adds three features rarely found together in one tool — a breakeven probability calculator, live MFE/MAE excursion tracking, and an automatic trail-to-breakeven workflow.
The indicator is built for traders who think in R-multiples: swing traders, prop-firm candidates, day traders, and anyone who wants to answer the question "does this setup actually make mathematical sense?" before committing capital.
🔹 What Makes It Different
Most risk/reward scripts stop at drawing levels and a position-size table. This one goes further:
• Breakeven Probability Math — For every R target, the panel displays the minimum win rate required to break even, adjusted for round-trip fees. A 3R target needs only 25% wins; a 1R target needs 50%. Seeing this side-by-side reframes how you evaluate setups.
• Live MFE / MAE Tracking — Maximum Favorable Excursion and Maximum Adverse Excursion are tracked in real time from the moment the setup becomes valid. Labels mark the exact bar of each peak in R-multiples, with leader lines connecting the label to the wick, so you can grade trade quality after the fact.
• Trail-to-Breakeven Visualization — When TP1 is hit, the original stop fades and a new breakeven line is drawn at entry, making the risk management discipline visible on the chart.
• Hybrid Auto-Detect — Leave Entry and Stop at zero and the script fills them using the current close and the most recent swing pivot plus an ATR buffer. Provide one manually and the other auto-completes. Everything can be overridden.
🔹 Methodology
Levels are calculated from the standard R-multiple framework:
• Risk per unit = |Entry − Stop|
• Take-profit N = Entry ± (N × Risk per unit), signed by trade direction
• Breakeven win rate = (1 + fees_R) / (1 + R target)
Direction is auto-inferred from the relationship between Entry and Stop (Long when Stop is below Entry, Short otherwise), and can be forced. Auto-detect uses a pivot lookback to locate the most recent swing high or low, then offsets the stop by a user-defined ATR multiple to reduce wick-out risk.
MFE and MAE reset whenever Entry or Stop changes, so editing inputs restarts tracking cleanly. Hit detection uses bar high or low against each level and fires alerts only on the rising edge of each event.
🔹 Visuals & Signals
• Risk zone rendered as a pink rectangle between Entry and Stop
• TP1, TP2 and TP3 zones rendered as stacked teal rectangles with graded opacity
• Entry line in indigo, stop in pink, take-profits in teal
• Labels anchor to the right edge of the zone so they never hide candles
• MFE label on the favorable excursion peak, MAE on the adverse peak, each offset 1.5 ATR with a dotted leader line
• Alerts: TP1 hit, TP2 hit, TP3 hit, Stop Loss hit, Breakeven reached
🔹 Key Inputs
• Setup Mode — Manual, Auto-Detect, or Hybrid
• Trade Side — Auto, Long, or Short
• Entry and Stop — leave at zero to auto-detect
• Swing Lookback and ATR Buffer — for auto-detected stops
• TP1, TP2, TP3 multipliers with individual show/hide toggles
• Trail Stop to Breakeven After TP1 — toggle
• Round-Trip Fees (%) — folded into breakeven math
• Enable Position Size Calculator — optional; account size and risk percentage
• Panel location, panel font size, label font size, zone length, zone transparency
🔹 How To Use
Step 1 — Add the script to any symbol and timeframe. By default, Hybrid mode uses the current close as entry and the most recent swing plus an ATR buffer as stop.
Step 2 — Override Entry or Stop with your planned levels if you have a specific setup in mind.
Step 3 — Check the Breakeven Analysis section of the panel. Confirm the minimum win rate required for your chosen R target is realistic for your strategy.
Step 4 — Set alerts for the targets you want to be notified on. If Trail-to-Breakeven is enabled, you will also receive a notification when TP1 hits so you can move your stop in your broker.
Step 5 — After the trade, review MFE and MAE to grade execution. Did price reach favorable excursion that you missed? Did it dip deep into risk before resolving?
🔹 Limitations & Transparency
• This is a planning and visualization tool. It does not place orders and does not produce buy or sell signals.
• The breakeven calculation treats fees as a percentage of entry price converted into R-units. It is a useful approximation, not a tax or slippage model.
• Auto-detected stops depend on recent swing structure. On very low-liquidity symbols or during strong trends without pullbacks, recent swings may be stale. Verify visually before using.
• MFE and MAE tracking uses bar high or low and resets when inputs change.
• Position sizing assumes a linear contract value and does not account for margin, leverage, or instrument-specific tick rules. Always cross-check with your broker.
🔹 Risk Disclosure
Trading carries risk of loss. This indicator is provided for educational and analytical purposes only and is not financial advice. Past behavior of any tool does not guarantee future performance. Use proper position sizing and never risk more than you can afford to lose. Indicator
Indicator
Indicator
Bollinger Band Screener [Pineify]Multi-Symbol Bollinger Band Screener Pineify – Advanced Multi-Timeframe Market Analysis
Unlock the power of rapid, multi-asset scanning with this original PulseWire Pine Script. Expose trends, volatility, and reversals across your favorite tickers—all in a single, customizable dashboard.
Key Features
Screens up to 8 symbols simultaneously with individual controls.
Covers 4 distinct timeframes per symbol for robust, multi-timeframe analysis.
Integrates advanced Bollinger Band logic, adaptable with 11+ moving average types (SMA, EMA, RMA, HMA, WMA, VWMA, TMA, VAR, WWMA, ZLEMA, and TSF).
Visualizes precise state changes: Open/Parallel Uptrends & Downtrends, Consolidation, Breakouts, and more.
Highly interactive table view for instant signal interpretation and actionable alerts.
Flexible to any market: crypto, stocks, forex, indices, and commodities.
How It Works
For each chosen symbol and timeframe, the script calculates Bollinger Bands using your specified source, length, standard deviation, and moving average method.
Real-time state recognition assigns one of several states (Open Rising, Open Falling, Parallel Rising, Parallel Falling), painting the table with unique color codes.
State detection is rigorously defined: e.g., “Open Rising” is set when both bands and the basis rise, indicating strong up momentum.
All bands, signals, and strategies dynamically update as new bars print or user inputs change.
Trading Ideas and Insights
Identify volatility expansions and compressions instantly, spotting breakouts and breakdowns before they play out.
Spot multi-timeframe confluences—when trends align across several TFs, conviction increases for potential trades.
Trade reversals or continuations based on unique Bollinger Band patterns, such as squeeze-break or persistent parallel moves.
Harness this tool for scalping, swing trading, or systematic portfolio screens—your logic, your edge!
How Multiple Indicators Work Together
This screener’s core strength is its integration of multiple moving average types into Bollinger Band construction, not just standard SMA. Each average adapts the bands’ responsiveness to trend and noise, so traders can select the underlying logic that matches their market environment (e.g., HMA for fast moves or ZLEMA for smoothed lag). Overlaying 4 timeframes per symbol ensures trends, reversals, and volatility shifts never slip past your radar. When all MAs and bands synchronize across symbols and TFs, it becomes easy to separate real opportunity from market noise.
Unique Aspects
Perhaps the most flexible Bollinger Band screener for PulseWire—choose from over 10 moving average methods.
Powerful multi-timeframe and multi-asset design, rare among Pine scripts.
Immediate visual clarity with color-coded table cells indicating band state—no need for guesswork or chart clutter.
Custom configuration for each asset and time slice to suit any trading style.
How to Use
Add the script to your PulseWire chart.
Use the user-friendly input settings to specify up to 8 symbols and 4 timeframes each.
Customize the Bollinger Band parameters: source (price type), band length, standard deviation, and type of moving average.
Interpret the dashboard: Color codes and “state” abbreviations show you instantly which symbols and timeframes are trending, consolidating, or breaking out.
Take trades according to your strategy, using the screener as a confirmation or primary scan tool.
Customization
Fully customize: symbols, timeframes, source, band length, standard deviation multiplier, and moving average type.
Supports intricate watchlists—anything PulseWire allows, this script tracks.
Adapt for cryptos, equities, forex, or derivatives by changing symbol inputs.
Conclusion
The Multi-Symbol Bollinger Band Screener “Pineify” is a comprehensive, SEO-optimized Pine Script tool to supercharge your market scanning, trend spotting, and decision-making on PulseWire. Whether you trade crypto, stocks, or forex—its fast, intuitive, multi-timeframe dashboard gives you the informational edge to stay ahead of the market.
Try it now to streamline your trading workflow and see all the bands, all the trends, all the time! Indicator
Multiple Symbol Trend Screener [Pineify]Multiple Symbol Trend Screener Pineify – Ultimate Multi-Indicator Scanner for PulseWire
Empower your trading with deep market insights across multiple symbols using this feature-rich Pine Script screener. The Multiple Symbol Trend Screener Pineify enables traders to monitor and compare trends, reversals, and consolidations in real-time across the biggest equity symbols on PulseWire, through a synergistic blend of popular technical indicators.
Key Features
Monitor up to 15 symbols and their trends simultaneously
Integrates 7 professional-grade indicators: MA Distance, Aroon, Parabolic SAR (PSAR), ADX, Supertrend, Keltner Channel, and BBTrend
Color-coded table display for instant visual assessment
Customizable lookback periods, indicator types, and calculation methods
SEO optimized for multi-symbol trend detection, screener, and advanced PulseWire indicator
How It Works
This indicator leverages PulseWire’s Pine Script v6 and request.security() to process multiple symbols across selected timeframes. Data populates a dynamic table, updating each cell based on the calculated value of every underlying indicator. MA Distance highlights deviation from moving averages; Aroon flags emerging trend strength; PSAR marks potential trend reversals; ADX assesses trend momentum; Supertrend detects bullish/bearish phases; Keltner Channel and BBTrend offer volatility and power insights.
Set up your preferred symbols and timeframes
Each indicator runs its calculation per symbol using its parameter group
All results are displayed in a table for a comprehensive dashboard view
Trading Ideas and Insights
Traders can use this screener for cross-market comparison, directional bias, entry/exit filtering, and comprehensive trend evaluation. The screener is excellent for swing trading, day trading, and portfolio tracking. It enables confirmation across multiple frameworks — for example, spotting momentum with ADX before confirming direction with Supertrend and PSAR.
Identify correlated movements or divergences across selected assets
Spot synchronized trend changes for basket trading ideas
Filter symbols by volatility, strength, or trend status for precise trade selection
How Multiple Indicators Work Together
The screener’s edge lies in its intelligent correlation of popular indicators. MA Distance measures the proximity to chosen moving averages, ideal for spotting overbought/oversold conditions. Aroon reveals the strength of new price trends, PSAR indicates reversal signals, and ADX quantifies the momentum of these trends. Supertrend provides a directional phase, while Keltner Channel & BBTrend analyze volatility shifts and band compressions. This amalgamation allows for a robust, multi-dimensional market snapshot, capturing details missed by single-indicator tools.
By displaying all key metrics side-by-side, the screener enables holistic decision-making, revealing confluence zones and contradiction areas across multiple tickers and timeframes.
Unique Aspects
Original implementation combining seven independent trend and momentum indicators for each symbol
Rich customization for symbols, timeframes, and all indicator parameters
Intuitive color-coding for quick reading of bullish/bearish/neutral signals
Comprehensive dashboard for instant actionable insights
How to Use
Load the indicator onto your PulseWire chart
Go to the script’s settings and input your preferred symbols and relevant timeframes
Set your desired parameters for each indicator group: Moving Average type, Aroon length, PSAR values, ADX smoothing, etc.
Observe the results in the top-right table, then use it to filter candidates and validate trade setups
The screener is suitable for all timeframes and asset classes available on PulseWire. Make sure your chart’s timeframe matches the one used in the scanner for optimal accuracy.
Customization
Choose up to 15 symbols to monitor in a single dashboard
Customize lookback periods, indicator types, colors, and display settings
Configure alerting options and thresholds for advanced trade automation
Conclusion
The Multiple Symbol Trend Screener Pineify sets a new standard for multi-asset screening on PulseWire. By elegantly merging seven proven technical indicators, the screener delivers powerful trend detection, reversal analysis, and volatility monitoring — all in one dashboard. Take your trading to new heights with in-depth, customizable market surveillance.
Indicator
Indicator
Indicator
Indicator
Indicator
Indicator
Triple RSI Indicator with ToggleThis script combines three relative strength index (RSI) indicators with different periods, and allows the user to toggle between them to generate overbought and oversold signals. The indicator is named "Triple RSI Indicator with Toggle" and has the short title "TRSI-T."
The input parameters for the RSI periods are set by the user and include a short RSI with a period of 5, a main RSI with a period of 14, and a long RSI with a period of 28. The overbought and oversold levels for each RSI can also be set by the user.
The script plots the three RSI lines on the chart and calculates a bar color based on the enabled RSI values. If all three RSI values are overbought, the bar color is set to fuchsia, if all three RSI values are oversold, the bar color is set to aqua, and if neither of these conditions is met, the bar color is set to not available.
The script also includes a fast RSI and an RSI exponential moving average (EMA) with adjustable periods. The RSI fast line is plotted along with the RSI EMA line, and a cloud fill is generated between the two lines. The fill color is based on whether the fast RSI line is above or below the RSI EMA line, with a blue color used for long signals and a pink color used for short signals.
This indicator can be used as part of a trading strategy in a number of ways. Here are a few examples:
Overbought and Oversold Signals: When the bar color of the indicator is fuchsia, it indicates that all three RSIs are overbought, and when the bar color is aqua, it indicates that all three RSIs are oversold. These signals can be used to enter a trade in the opposite direction, anticipating a reversal in price.
RSI Divergence: Traders can also look for divergences between the price and the RSI values. For example, if the price is making higher highs but the RSI values are making lower highs, it could indicate that the price trend is weakening and a reversal may be imminent. Conversely, if the price is making lower lows but the RSI values are making higher lows, it could indicate that the price trend is about to reverse.
RSI Cloud Signals: The cloud fill generated between the fast RSI and RSI EMA lines can be used to generate trading signals. When the fast RSI line is above the RSI EMA line and the fill color is blue, it can be a signal to go long. When the fast RSI line is below the RSI EMA line and the fill color is pink, it can be a signal to go short.
If anybody has some interesting thoughts on how to improve it, let me know!! Indicator
Indicator
MTF Commodity Oddity Index (CCI+)MTF Commodity Oddity Index (CCI+)
This chart overlay indicator is based upon the Commodity Channel Index (CCI) and can signal multiple triple-timeframe CCI overbought and oversold confluences directly onto your chart, intended for use as a confluence either for reversal trade entries, or potential trade exits, indicating where price may be probable to reverse.
Features include:
- Primary set of fully configurable triple-timeframe overbought and oversold signals, indicating where 3 selected timeframes are all overbought or all oversold at the same time. Enabled by default.
- Secondary set of fully configurable triple-timeframe overbought and oversold signals, indicating where 3 selected timeframes are all overbought or all oversold at the same time. Enabled by default.
- Optional drawing of background colours and/or ribbon seen at bottom of the chart image.
- The default primary MTF #1 timeframes are set to 1 minute, 5 minute and 15 minute. These are highly suitable for low timeframe scalpers trading on < 5m charts, and can often pin point price reversals.
- The default Secondary MTF #2 timeframes are set to 15 minute, 30 minute and 120 minute. These are suitable for both low timeframe scalpers and considerably higher timeframe traders.
- Independent alerts for MTF #1 and MTF #2 triple-timeframe confluences, including options for alerting MTF overbought and MTF oversold individually, as well as an option for alerting either overbought or oversold in a single combined alert.
- Also includes standard configurable CCI options, including CC length and source type.
Note: The features listed above are accurate at the time of publishing but maybe updated or added to in future.
A similar MTF CCI indicator is also available as a panel indicator here .
This indicator is based upon the original MTF Fantastic Stochastic (FS+) available here .
What is the Commodity Channel Index (CCI)?
Investopedia has described the popular oscillator as follows:
“The Commodity Channel Index (CCI) is a momentum-based oscillator used to help determine when an investment vehicle is reaching a condition of being overbought or oversold.
Developed by Donald Lambert, this technical indicator assesses price trend direction and strength, allowing traders to determine if they want to enter or exit a trade, refrain from taking a trade, or add to an existing position. In this way, the indicator can be used to provide trade signals when it acts in a certain way.”
You can read more about the CCI , its use cases and calculations here .
How do traders use overbought and oversold levels in their trading?
The oversold level, that is traditionally when the CCI is above the 100 level is typically interpreted as being 'overbought', and below the -100 level is typically considered 'oversold'. Traders will often use the CCI at an overbought level as a confluence for entry into a short position, and the CCI at an oversold level as a confluence for an entry into a long position. These levels do not mean that price will necessarily reverse at those levels in a reliable way, however. This is why this version of the CCI employs the triple timeframe overbought and oversold confluence, in an attempt to add a more confluence and reliability to this usage of the CCI . While traditionally, the overbought and oversold levels are below -100 for oversold, and above 100 for overbought, the default threshold settings of this indicator have been increased to provide fewer, stronger signals, especially suited to the low timeframes and highly volatile assets. Indicator
Indicator
Indicator
