Asian Range Liquidity Map [AGPro Series]Asian Range Liquidity Map
🔹 OVERVIEW
Asian Range Liquidity Map is a precision tool for ICT and smart-money traders who focus on the London Open liquidity sweep. The indicator maps the Asian session high/low liquidity pool, tracks which side gets taken on the London kill-zone, and keeps a rolling 60-session record of post-sweep reactions. The engine calculates live Reversal / Continuation / Mixed probabilities for both bull and bear sweeps and displays everything in a compact info panel without cluttering the chart.
Whether you trade Turtle Soup setups, session-based liquidity grabs, or simply want clean Asian range context, this indicator gives you the structural read most traders spend months building manually.
🔹 UNIQUE EDGE
This is not another session-box plotter. Three design choices separate it from generic Asian range indicators:
1. ATR-Normalized Quality Filter — the range width is measured against the Daily ATR, not the chart timeframe. Sessions that are abnormally narrow (illiquid) or abnormally wide (news-driven noise) are filtered out of the statistics engine automatically. Only clean, tradable ranges count.
2. Live Historical Statistics Engine — every past sweep in the 60-session rolling window is classified as Reversal, Continuation, or Mixed using close-based validation. When a new sweep fires, a state label immediately shows the historical bias: "Bull Sweep -> Historical Reversal 73% (n=26)". You see the context the moment price reacts.
3. Three-Tier Classification — most tools treat sweep reactions as a binary outcome. This engine separates clean reversals, clean continuations, and indecisive mixed responses, giving a more honest statistical picture. The Mixed bucket is visible in the panel so the trader always knows how confident the signal actually is.
🔹 METHODOLOGY
1. Session Tracking — the Asian window is tracked using pure UTC hour/minute math (default 00:00-08:00 UTC), fully independent of chart timezone. Start and end hours are configurable.
2. Range Validity — on session close, the range width is compared to the Daily ATR. If the ratio falls outside the user-defined band (default 0.3-2.0 x dATR), the session is marked Filtered Out and excluded from statistics.
3. Sweep Detection — after the session closes, the engine watches a configurable post-open window (default 6 hours) for the first break of the Asian High or Low. Only the first sweep per session is recorded, which keeps the sample clean.
4. Reaction Classification — after the reaction window (default 10 bars), the engine evaluates post-sweep closes:
- Reversal: price closed through the opposite side by at least Reversal Threshold x Range
- Continuation: price sustained past the sweep level with pullback under Continuation Threshold x Range
- Mixed: neither condition was met
5. Rolling Sample — the most recent 60 classified sweeps feed the Bull and Bear statistics independently. Default is 60, configurable from 20 to 100.
🔹 SIGNALS AND ON-CHART ELEMENTS
- Asian Range Box: dotted amber rectangle during the session, solidifies on close if the range passes the ATR filter. Filtered sessions fade to near-invisible.
- High and Low Dotted Extensions: projected right from each validated session, showing the liquidity levels the market will target.
- Sweep State Label: appears on the bar that first breaks the range. Color-coded green for bull sweeps, pink for bear sweeps, with the historical bias and sample size baked in.
- Sweep Line: thick horizontal line at the taken level, drawn forward across the projection zone.
- Projection Zone: rectangular post-sweep forecast box where follow-through (or rejection) typically plays out.
- Multi-Day Overlay: up to the last 5 validated Asian ranges rendered with fade hierarchy (oldest most faded, newest most visible).
- Three alerts are included: Bull Sweep Detected, Bear Sweep Detected, and London Open with Valid Asian Range.
🔹 KEY INPUTS
Session Settings:
- Asian Session Start/End Hour (UTC)
- Sweep Detection Window (hours after London Open)
Quality Filter:
- Use ATR filter (on/off)
- Min and Max Range Width (x Daily ATR)
- ATR Length
Historical Stats Engine:
- Sample Size (20-100 sessions)
- Reaction Window (bars after sweep)
- Reversal Threshold (x Range)
- Continuation Threshold (x Range)
Multi-Day Overlay:
- Show historical sessions (on/off)
- Days to show and fade intensity
Post-Sweep Projection:
- Show projection zone (on/off)
- Projection length in bars
Visual Style:
- Label Font Size (independent from panel)
- Show sweep state label (on/off)
Info Panel:
- Show panel, location, theme (Dark/Light)
- Panel Font Size (independent from labels)
🔹 HOW TO USE
Best fit: intraday timeframes from 1m to 60m. The 15m chart is the intended sweet spot and what the defaults are tuned around. The script auto-disables on 4H and higher with a clear on-chart notice.
Typical workflow:
1. Confirm Range Status shows Valid after the Asian session closes. If Filtered Out, stand aside that day.
2. Wait for the London Sweep Window state and watch the Asian High/Low levels.
3. When a sweep fires, read the state label. A high Reversal probability near a major higher-timeframe level often flags a Turtle Soup opportunity. A high Continuation probability suggests fading is risky and trend-aligned entries are preferred.
4. Use the projection zone as a post-sweep attention area, not a target in itself.
5. Cross-check with your own higher-timeframe bias, volume, and structure before committing.
🔹 LIMITATIONS AND TRANSPARENCY
- This is a context tool, not a strategy. No buy/sell signals are generated and no backtest or performance claim is made.
- The historical percentages shown are descriptive statistics of recent price behavior in the sample window. They describe what has happened, not what will happen. A reading like 80% Reversal means four out of five prior sweeps in the sample reversed; the fifth did not.
- On strongly trending or low-volatility instruments, distributions can skew heavily to one category. For example, on a tight range-bound market a liquidity sweep almost always reverts, producing very high Reversal readings. This is a feature of the data, not a bug. If a distribution looks extreme, tighten the Reversal Threshold and shorten the Reaction Window for a stricter definition, or widen them for a looser one.
- Request.security is used to pull Daily ATR and is evaluated without lookahead; no future data is used.
- First-run sample size will be small until the chart has enough history to fill 60 sessions. Expect the panel to show progress like 18 / 60 until the buffer fills.
🔹 RISK DISCLOSURE
This indicator is a research and analysis tool for educational purposes. It does not constitute financial advice, a recommendation, or a solicitation to buy or sell any asset. Past behavior of liquidity sweeps does not guarantee future outcomes. Trading carries substantial risk of loss. Always perform your own analysis, apply risk management that suits your account, and consult a qualified professional before making financial decisions. Indicator
Institutional Candle Detector [AGPro Series]🕯️ Institutional Candle Detector
Every trader has stared at a massive candle and asked the same question: "Was that the start of a move, the end of one, or just noise?" Most indicators stop at detection — they paint the candle, drop a label, and walk away. This one keeps watching.
Institutional Candle Detector uses a dual-track engine. The body-driven track flags high-conviction candles where ATR-normalized body size and relative volume both expand together, then classifies each event by body/wick geometry. The independent absorption track captures a different signature entirely — low-body candles on extreme volume, the classic aggression-absorbed footprint that body-only detectors miss. Every detected event is then re-evaluated over the following bars to produce a measurable outcome scorecard.
🔹 OVERVIEW
The script scans each bar for two separate, mutually-exclusive institutional signatures:
• Body-driven events. Body must exceed a multiple of ATR AND volume must exceed a multiple of its rolling average. Classified by geometry into Continuation, Reversal or Exhaustion.
• Absorption events. Volume extremely elevated BUT body contained — the market paid for a big move and did not get one. Price was absorbed.
Every detected candle is then given a reaction zone projected forward, and its outcome is automatically tagged after the configured look-forward window — Follow-Through (FT), Reverse (RV) or Consolidation (CN). The panel accumulates aggregate statistics across the loaded chart so the trader can see which candle type actually works on their instrument and timeframe.
🔸 UNIQUE EDGE
What separates this tool from generic "big candle" or "volume spike" indicators:
• Dual-track detection. A single filter cannot capture both explosive moves and absorption. This script runs two engines in parallel with independent thresholds.
• Four-class geometric taxonomy, each backed by a distinct detection path. Continuation and Reversal fire from the body-driven track with different geometry. Exhaustion catches the mid-profile edge cases. Absorption runs entirely off its own volume-first track.
• Automatic after-behavior tracking. Each event is re-examined after N bars and tagged with an outcome code. This is the part most scripts omit — and it's where edge lives.
• Aggregate statistics panel. Follow-through rate, reverse rate, consolidation rate, and per-class counts are computed continuously. The panel tells you whether institutional candles on this asset actually extend, reverse, or fade.
• Forward-projected zones, colored by class. Body-driven bull/bear events use state colors. Absorption uses an indigo accent so the rarer signature is instantly recognizable. Reversal zones use the contrarian color to emphasize the expected directional flip.
🔹 METHODOLOGY
Body-Driven Track (produces CONT, REV, EXH)
– Body is measured as absolute (close − open) and required to exceed Body × ATR multiple.
– Volume is required to exceed a configurable multiple of its SMA average.
– An optional wick filter rejects candles where total wick exceeds the body beyond a given ratio, removing wide-range noise that looks institutional but is not.
– Continuation: body% ≥ configured threshold (clean directional close).
– Reversal: opposing wick% ≥ configured threshold (sharp rejection after initial push).
– Exhaustion: passes the dual-gate but falls into neither clean category — mid profile, often late in a move.
Absorption Track (produces ABS)
– Volume must exceed an independently configurable multiple (higher than body-driven default).
– Body must be small — below a max Body × ATR and below a max Body / Range.
– When absorption fires, it takes precedence over body-driven classification.
After-Behavior Layer
– After lookFwd bars, the script compares the extreme price move in each direction against the original body size.
– If same-direction extension ≥ ftPct × body → Follow-Through (FT).
– If opposite-direction retrace ≥ revPct × body → Reverse (RV).
– Otherwise → Consolidation (CN).
Aggregate counters accumulate across the loaded chart, producing a running scorecard visible in the panel.
🔸 SIGNALS, STATES & MARKERS
On-chart signals
• Institutional body recolored by class — bull/bear direction for CONT and EXH; contrarian color for REV; accent color for ABS.
• Directional triangle marker above/below the bar.
• Classification label: INST-Bull 3.2x CONT or INST-Bear 5.4xV ABS format, ASCII only. Labels offset from the candle to stay readable on dense charts.
• Reaction zone box projected forward from the candle's high-low range, color-coded by class.
• Outcome marker (FT / RV / CN) plotted lookFwd bars after the event.
Alerts available
• Institutional Continuation
• Institutional Reversal
• Institutional Absorption
• Institutional Exhaustion
All four alerts fire on confirmed bars only.
🔹 KEY INPUTS
Detection Core (body-driven track)
– ATR Length (default 14)
– Volume Average Length (default 20)
– Min Body × ATR (default 2.0)
– Min Volume Multiple (default 2.5)
– Wick filter toggle and max Wick/Body ratio (default 2.5)
Absorption Track
– Enable Absorption Detection
– Absorption Min Volume Multiple (default 4.0)
– Absorption Max Body × ATR (default 1.5)
– Absorption Max Body / Range (default 0.40)
Classification
– Continuation body% threshold (default 0.60)
– Reversal opposing-wick% threshold (default 0.40)
After-Behavior
– Look-forward bars (default 5)
– Follow-through threshold as fraction of body (default 0.50)
– Reverse threshold as fraction of body (default 0.60)
Visuals
– Show/hide zones, zone projection length, opacity, max active zones
– Label size (default Small; increase if labels feel too compact)
– Institutional border width
– Outcome marker toggle
Panel
– 8-position panel placement
– Dark / Light theme
– Font size (default Normal)
– Recent events mini-list toggle
🔸 HOW TO USE
1. Start with defaults on a liquid asset. 4H is a strong baseline; 1H for active traders; Daily for swing context. On Daily, consider lowering Min Body × ATR to 1.5 if events are too rare.
2. Watch the panel accumulate events over two to four weeks on your instrument. The follow-through rate tells you whether institutional candles on this chart tend to extend or fade.
3. Trade-context usage:
– Continuation with a high historical follow-through rate on this asset → trend trades in candle direction after pullback into the zone.
– Reversal with a high historical reverse rate → fade setups at key levels.
– Absorption → aggressive flow was met by an equal or greater defender; often precedes a reversal or compression phase.
– Exhaustion → proceed with caution; frequently a late-move signature where the trend is losing clean structure.
4. Reaction zones act as provisional supply/demand. A retest of a zone with another institutional event near it is a confluence worth noting.
5. Tune thresholds per asset. High-liquidity instruments may need Body × ATR of 2.5+ to keep events selective; low-liquidity pairs can go down to 1.5. Absorption volume multiple can also be adjusted upward on already-volatile instruments.
🔹 LIMITATIONS & TRANSPARENCY
• This is an analytical indicator, not a strategy. No entry, exit, or stop logic is defined and no performance claims are made.
• Aggregate statistics are computed over the loaded chart window and will shift as more bars load or as timeframes change.
• Volume quality depends on the data feed; exchange-reported volume differs across sources for the same asset.
• Follow-through evaluation uses a fixed look-forward window; real trade management will differ.
• All results are historical and descriptive. Past behavior of any candle class does not guarantee future behavior.
🔸 RISK DISCLOSURE
Trading carries substantial risk. This tool is provided for analytical and educational purposes. Do your own research. Use position sizing and risk management appropriate to your account. Nothing in this script constitutes financial advice. Indicator
Volume Climax Detector [AGPro Series]Volume Climax Detector
Volume Climax Detector is an advanced volume analytics tool that identifies extreme institutional volume events using a three-filter VSA (Volume Spread Analysis) methodology. Rather than triggering on simple volume multiples, the script combines Volume Z-Score statistics, Spread analysis, and Close Location to isolate genuine climax bars — the kind of exhaustion moves Wyckoff and VSA traders look for at trend tops and bottoms.
🔹 OVERVIEW
Volume alone is a noisy signal. A "high volume bar" on one instrument is a quiet bar on another, and most volume-based indicators either miss real climaxes or fire on every uptick. This script takes a statistical approach: it measures how extreme each bar's volume is relative to its own recent history (Z-Score), confirms the bar structure makes sense (Spread and Close Location), and then classifies the event as a Buying Climax or Selling Climax using trend context — the Wyckoff way.
The result is a small number of high-conviction labels at exactly the places where large participants tend to exhaust themselves: panic buys at tops, panic sells at bottoms, and hidden absorption in between.
🔹 WHAT MAKES IT DIFFERENT
Most volume indicators apply a single threshold (e.g. volume > 2× average) and stop there. This script layers three independent VSA filters, each addressing a different failure mode:
• Volume Z-Score — adapts to the instrument's own volume distribution. A 3σ event on BTC is genuinely rare, regardless of session or timeframe.
• Spread filter — requires the bar's range to exceed its recent average. Eliminates the common false positive of a high-volume bar that barely moved (compression).
• Close Location — requires the close to sit in the upper or lower third of the bar. Separates conviction from indecision.
Beyond detection, two analytics layers set it apart from typical volume tools:
• Reversal Success Tracking — every climax is tracked forward for a configurable window, and the script records whether a meaningful counter-move actually materialised (measured in ATR). The panel shows a live Reversal Rate, so users get honest feedback on how well climaxes have worked on the current symbol and timeframe.
• Magnitude Scoring (1–10) — every climax receives a strength score derived from its Z-Score, making it easy to distinguish routine spikes from truly extreme events (marked with ★).
🔹 METHODOLOGY
1. Volume Statistics
The script computes a rolling mean and standard deviation of volume over a configurable lookback window (default 50 bars). The Z-Score tells how many standard deviations above the mean the current bar is. A reading of 3.0σ or higher (default threshold) corresponds to the top ~0.27% of bars — statistically rare, not just "above average."
2. Triple Filter Gate
A bar qualifies as a potential climax only when:
• Z-Score ≥ threshold (volume anomaly)
• Bar range ≥ spread multiplier × average range (wide spread)
• Close is in the upper 33% (strength) or lower 33% (weakness) of the bar range
3. Wyckoff Classification
• Buying Climax — qualifying bar during an established uptrend. Interpretation: buyers are exhausting themselves; potential topping action.
• Selling Climax — qualifying bar during an established downtrend. Interpretation: sellers are exhausting themselves; potential basing action.
• When no clear trend exists, classification falls back to close location plus bar direction so that sideways regimes still produce meaningful signals.
4. Confluence Grouping
When multiple same-direction climaxes occur close together in time or price, the script collapses them into a single label representing the strongest event in the cluster. This keeps charts readable without losing information — the panel still counts every individual climax.
5. Effort vs Result (optional)
A companion layer flags high-volume bars with unusually narrow spread — the classic VSA "No Demand" and "No Supply" conditions. These often signal hidden absorption ahead of a reversal and are shown as separate labels.
🔹 SIGNALS & ALERTS
Four built-in alert conditions:
• Buying Climax detected
• Selling Climax detected
• Extreme Climax (Z-Score above the extreme threshold, marked with ★)
• No Demand / No Supply divergence
Each alert payload includes the symbol, Z-Score, and magnitude score, ready for automation or review.
🔹 KEY INPUTS
• Volume Lookback (default 50) — rolling window for statistics.
• Z-Score Threshold (default 3.0σ) — minimum statistical extremity. Lower on intraday, higher for premium signals only.
• Extreme Threshold (default 4.0σ) — above this, climaxes are flagged with a ★.
• Spread and Close filters — each can be toggled independently for flexibility across asset classes.
• Trend EMA Length and Sensitivity — control how the script defines uptrend and downtrend, with an ATR-normalised slope check to avoid misclassifying sideways regimes.
• Reversal Window and Threshold — define what counts as a "successful" reversal for the panel statistic.
• Confluence controls — Time-first (default), Price-first, or Strict mode, plus bar and ATR tolerances.
• Climax Zones (optional, default off) — extends each climax bar's range forward as a reaction zone, similar to S/R.
🔹 HOW TO USE
• Start with defaults on any liquid instrument and timeframe. The script adapts to the local volume distribution automatically.
• On highly volatile intraday timeframes, consider raising the Z-Score Threshold to 3.5σ for fewer, cleaner signals. On slower timeframes, the default works well.
• Treat a ★ Extreme Climax as higher-conviction than a plain climax, and pay attention to the Magnitude Score for fine gradation.
• Use the Reversal Rate panel value as a feedback loop — if it is low on your chosen instrument and timeframe, either adjust thresholds or reconsider the setup.
• Combine with your own structural analysis (support/resistance, HTF trend, market structure) for confirmation. The script identifies the event, not the entry.
🔹 LIMITATIONS & TRANSPARENCY
• This is an indicator, not a strategy. It does not generate buy or sell orders and makes no assumption about position sizing or risk management.
• Climaxes are statistical events. They tend to mark inflection points, but no volume pattern resolves into a reversal every time. The built-in Reversal Rate panel value exists precisely to make this honest — users see the actual hit rate on their own chart.
• The script uses publicly available volume data from the chart's exchange. Volume quality varies by venue; results may differ on symbols with thin or unreliable volume reporting.
• Classification depends on trend context. In strongly sideways regimes, the fallback rules may label climaxes differently than a human analyst would; reviewing the Trend EMA and sensitivity inputs helps here.
• Labels are confirmed on bar close (no repaint). Panel counters and the Current Z-Score value update intrabar for live monitoring.
🔹 RISK DISCLOSURE
Trading involves substantial risk of loss. Past behaviour of any signal or statistic does not guarantee future performance. This script is a research and analysis tool — it is not investment advice, a recommendation, or a solicitation to trade. Users are responsible for their own decisions, risk management, and position sizing. Indicator
Wyckoff Distribution Phase Map [AGPro Series]Wyckoff Distribution Phase Map
🔹 OVERVIEW
Wyckoff Distribution Phase Map is a retrospective structural mapping tool built on the classic Wyckoff distribution schematic. It locates and labels the six core distribution events — Preliminary Supply (PSY), Buying Climax (BC), Automatic Reaction (AR), Upthrust (UT), Sign of Weakness (SOW) and Last Point of Supply (LPSY) — only after a bearish Change of Character (CHoCH) confirms that the prior uptrend has structurally broken. The indicator frames the active trading range as a shaded zone, plots BC and AR horizontal references, and tracks the phase state (A, B, C, D, E) in a dedicated info panel with a forming-candidate watchlist before confirmation.
🔹 WHAT MAKES IT DIFFERENT
Most Wyckoff scripts on PulseWire label events reactively on every elevated swing, producing dense, often contradictory signals during ranging or trending markets. This indicator takes the opposite approach. During an uptrend, the chart remains completely clean. Rolling trackers silently maintain candidate values for BC, PSY and AR in memory, while a live watchlist row in the panel shows the forming distribution candidate in real time. Events are only drawn on the chart after CHoCH locks the schematic, at which point PSY, BC and AR appear together as a confirmed retrospective bundle. UT, SOW and LPSY then populate as the post-CHoCH structure unfolds. A two-tier expiry system closes both incomplete and fully-played-out distributions, ensuring the active schematic on screen always reflects current market structure — not stale history.
🔹 METHODOLOGY
The engine runs in two coordinated layers. The first layer tracks higher-high and higher-low sequences to qualify an uptrend and rolls candidate values for the Buying Climax (running maximum swing high), Preliminary Supply (last pre-BC elevated swing high) and Automatic Reaction (running minimum after BC). The second layer watches for a structural break below the last confirmed higher-low, which defines the CHoCH. On CHoCH confirmation, the candidate values are snapshotted as BC, PSY and AR labels, the trading range zone is drawn, and the state machine advances to the forward-detection phase. Upthrust, Sign of Weakness and Last Point of Supply are then detected in strict sequence using a combination of price-to-BC, price-to-AR and volume-to-average filters. Volume context is computed against a 20-period moving average baseline with separate climactic, elevated and weak thresholds tuned for crypto and equities alike.
🔹 SIGNALS AND ALERTS
The indicator fires two categories of alerts. The CHoCH Confirmation alert triggers the moment the structural break locks in, including the resolved BC and AR levels. Event alerts fire for each subsequent UT, SOW and LPSY detection. No alert is fired during the forming phase — alerts are reserved for confirmed structural events, keeping notification noise low. A projected markdown line is drawn forward from LPSY using the trading range height as a symmetrical target, purely as a visual reference point rather than a trade signal.
🔹 KEY INPUTS
Core Engine inputs control swing lookback sensitivity, candidate maximum age and the post-CHoCH timeout window. Volume Analysis exposes the moving average length and three multipliers for climactic, elevated and weak volume classification. Visual inputs toggle the trading range zone, BC and AR horizontal levels, the CHoCH dashed break line, the markdown projection, the confidence halo and the floating distribution summary label, with full control over font size, line widths and zone transparency. The info panel can be repositioned to six anchor points and switched between dark and light themes. A Keep Historical Events toggle allows old schematics to remain on the chart after reset, off by default for a clean view.
🔹 HOW TO USE
Apply the indicator to any liquid instrument and any timeframe. During uptrends, observe the Watching row in the panel to monitor the forming BC candidate. When CHoCH prints, the full PSY, BC, AR bundle appears with the trading range shaded. From that point, use the Next Expected row to track what the engine is waiting for. The confidence score progresses from 70 at CHoCH to 97 at LPSY. The floating summary label on the right edge of the chart provides an at-a-glance status even when the primary event labels are scrolled off to the left. The indicator works standalone but is designed to complement any market structure, order flow or supply-and-demand workflow.
🔹 LIMITATIONS AND TRANSPARENCY
This tool is a pattern-recognition and labeling engine, not a strategy or trading signal generator. All events are detected retrospectively after their confirming bar has closed plus the swing lookback period — this is by design to eliminate redrawing. The Wyckoff schematic is a framework, not a deterministic forecast; not every distribution completes the full six-event sequence, and markets frequently fail schematics entirely and resume the prior trend. The volume analysis assumes reliable reported volume, so thin or fragmented markets may produce weaker classification. Confidence scores are internal heuristics tied to event progression, not statistical probabilities. Past schematic completions do not predict future market behavior.
🔹 RISK DISCLOSURE
This indicator is published for educational and analytical purposes only. It does not constitute financial advice, a trading recommendation or an investment solicitation. Trading any financial instrument involves substantial risk, including the potential loss of principal. Past performance does not guarantee future results. Users are solely responsible for their own trading decisions, risk management and independent research. Always backtest thoroughly and trade within a risk framework you understand. Indicator
Session Reaction Map [AGPro Series]Session Reaction Map
🔷 OVERVIEW
Session Reaction Map is a premium intraday study that maps how price reacts to the most important daily and weekly reference levels right at the opens of the Asia, London and New York sessions. Each session open is evaluated inside a fixed measurement window, and the resulting reaction is broken down into four dimensions: dominant move, close follow-through, wick rejection and counter-move penalty. The output is a single 0-100 reaction score that is then translated into tier-coded labels, premium reaction zones, an active reference band and a compact status panel, so you can instantly read what happened at each session open without scrolling through candles.
The indicator is designed for discretionary traders, systematic traders, SMC and price action practitioners who want a clean, consistent and quantitative way to read session open behaviour around PDH, PDL, PDM, Daily Open and Weekly Open. Reactions are drawn as directional zones (bull zones above the reference and bear zones below), with up or down pointing labels centered on the reaction, so orientation is always unambiguous.
🧭 UNIQUE EDGE
Most session open tools only mark time windows or highlight levels. Session Reaction Map goes further and quantifies the quality of the reaction itself. Four independent dimensions are measured against a fixed ATR-normalized baseline, and the final score determines not only whether a label is shown but also how prominent it is. Elite scores (80+) get the strongest visuals; strong scores (70-79) get a slightly softer treatment; watch scores (55-69) are coded as caution; anything below 55 is filtered out by default.
This separation between detection (a session open near a reference) and evaluation (the reaction quality score) is the core edge. It lets you focus only on the best intraday reactions and discard noise automatically, while still being able to audit every component by adjusting the ATR length, touch tolerance, evaluation window and score thresholds.
⚙️ METHODOLOGY
Session detection uses the chosen timezone and three session windows (Asia, London, New York), each with its own editable open range. When a session open occurs, the script checks whether the open price is within an ATR based touch tolerance of any enabled reference level (Previous Day High, Previous Day Low, Previous Day Mid, Daily Open or Weekly Open). If so, a reaction window is engaged on that bar and tracked for a configurable number of bars.
During the reaction window, the live zone, reference band and dashed reference line are updated in real time. When the window completes, the final score is computed as:
• Dominant move score (up to 45 points) - scaled against 1.20 x ATR
• Close follow-through score (up to 30 points) - scaled against 0.90 x ATR
• Wick rejection score (up to 15 points) - scaled against 0.50 x ATR
• Counter-move penalty (up to -20 points) - scaled against 1.00 x ATR
The sum is clamped into the 0-100 range and mapped into four tiers: Elite, Strong, Watch and Weak. The dominant direction of the reaction (up or down) is determined by comparing the upside excursion from the reference to the downside excursion from the reference during the window.
🎯 SIGNALS AND VISUALS
• Reaction zones - rectangular areas connecting the reference level with the reaction extreme, tier-coded by score and bias
• Active reference band - a thin accent band around the current reference level during a live reaction window
• Dashed reference line - marks the exact reference price while the reaction is being measured
• Tier-coded labels - up-pointing labels below bullish reactions and down-pointing labels above bearish reactions, centered on the reaction window
• Session dots - small colored markers that optionally display only on valid events, keeping the chart clean
• Active measurement highlight - an ultra-soft background shade on bars inside a live reaction window
Labels use a ring buffer overlap check, so dense multi-session conditions do not pile labels on top of each other. When two labels would visually conflict, the higher-scored reaction wins.
🛠️ KEY INPUTS
Sessions - enable/disable and edit Asia, London and New York session windows, each with its own color and timezone.
Reference Levels - individually toggle PDH, PDL, PDM, Daily Open and Weekly Open.
Reaction Logic - ATR length, touch tolerance in ATR, evaluation bars, label score filter, minimum label score, overlap reduction (bars and vertical ATR gap).
Visuals - show/hide reference levels, session dots, dots only on valid events, reaction zones, minimum score for zones, zone transparency and extension, live reaction zone, active reference band with its ATR size and transparency, active measurement highlight, level width, label size, label offset in ATR and label background transparency.
Panel - show/hide, position (six anchor points), Dark or Light theme, font size, optional guide row.
All numerical inputs carry professional English tooltips explaining their role, so the script can be tuned for any symbol, timeframe and trading style.
📘 HOW TO USE
1. Apply the script on an intraday timeframe. It is designed for intraday use and will stay passive on daily/higher timeframes.
2. Recommended starting timeframe is 4H for swing intraday context, and 1H for tactical intraday work. Lower timeframes (15m, 30m) work too but may produce dense output.
3. Start with the default settings. Observe which sessions and which reference levels generate the most Elite and Strong reactions on your symbol.
4. Use the panel to monitor the current state: last session, last reference, bias, score, tier, label filter, zone filter and the active reaction status.
5. Treat Elite (80+) and Strong (70-79) reactions as the main signals. Watch tier is informative and Weak tier is generally discarded.
6. Align with your own confluence: higher timeframe bias, structure, orderflow, or whatever your primary framework is. The script does not issue buy or sell calls - it scores reactions, and you decide.
⚠️ LIMITATIONS AND TRANSPARENCY
• This is not a strategy and does not place orders. No backtest statistics are implied.
• Reaction scores are computed after the evaluation window completes, so they are not repainting but are confirmed with a lag equal to the evaluation window size.
• The live reaction zone updates during the window and is finalized when the window closes.
• Session behavior varies significantly by symbol (crypto vs FX vs equities) and by volatility regime. Inputs should be tuned per symbol.
• Daily and Weekly references use standard request.security with barmerge.lookahead_off to avoid look-ahead bias.
• The script is not a forecasting tool. It is a post-event quantification of how price has just reacted to a known reference level.
🛡️ RISK DISCLOSURE
Trading involves substantial risk. Past reactions, patterns, zones or scores do not guarantee future performance. This script is provided for educational and analytical purposes only and is not financial advice. Always combine any tool with your own research, a defined risk plan and proper position sizing. You are solely responsible for your trading decisions. Indicator
Repricing Belt Engine [AGPro Series]Repricing Belt Engine
🔹 OVERVIEW
Repricing Belt Engine identifies qualifying displacement impulses and constructs ATR-scaled repricing belts around the impulse body, then tracks each belt's first-revisit lifecycle through three discrete outcomes: Held, Rejected, and Broken. The engine turns raw impulse candles into structured, evaluable reaction zones — giving traders a clean framework for studying how price behaves when it returns to the scene of a decisive move.
Unlike generic supply/demand or order block tools, this indicator does not simply mark impulse zones and leave them on the chart indefinitely. Every belt has a full state machine: Active → first qualifying touch → terminal outcome. A top-right status panel summarizes active belts, current belt context, 50-bar directional bias, and outcome counts so the chart context is always one glance away.
🔸 UNIQUE EDGE
Most displacement or supply/demand indicators stop at drawing a box. Repricing Belt Engine differentiates itself with four specific mechanics:
• ATR-scaled geometry — Belt width is normalized by ATR (not raw body size), producing consistently visible zones across volatility regimes and symbols. Optional "Auto (Body)" and "Body 70%" modes are available for traders who prefer tighter constructions.
• Three-outcome lifecycle model — Every belt resolves into one of five states (Active, Held, Rejected, Broken, Expired) based on penetration depth and close position. No more static zones cluttering the chart after price has decisively moved on.
• Depth-gated touch qualification — Wick-grazing does not trigger state transitions. A revisit must penetrate the belt by a configurable minimum depth (ATR-relative) before it counts, filtering noise from meaningful reactions.
• Excursion-tolerant hold detection — A belt can be marked Held even when price briefly dips beyond it, as long as the close respects the belt and the excursion stays within the Hold Tolerance band. This matches how institutional levels actually react in live markets.
🔹 METHODOLOGY
1. Impulse Qualification: A bar qualifies as an impulse when its body magnitude exceeds Impulse Threshold × ATR AND its body-to-range ratio is at least Min Body / Range Ratio. Both gates must pass — this filters out long-wick bars that look decisive but are not.
2. Belt Construction: On a qualifying impulse, a belt is drawn using the selected Width Mode. In ATR Scaled mode (default), the belt is centered on the impulse body midpoint and spans ±ATR Width Half-Span × ATR. A mid-line is drawn through the belt center.
3. Cooldown: A minimum bar gap (Cooldown Between Belts) is enforced between consecutive belt formations, preventing rapid clustering in extended trends.
4. Lifecycle Tracking: On every confirmed close, each active belt is evaluated:
• If close breaches the belt with excursion beyond Reject Tolerance → Broken
• If close recovers but excursion exceeded Hold Tolerance → Rejected
• If close respects the belt after a qualifying touch → Held
• If no resolution within Belt Max Lifetime bars → Expired
5. Active Cap: A maximum number of concurrent active belts is enforced (Max Active Belts). When the cap is reached, the oldest active belt is auto-expired to keep the chart focused on the current narrative.
🔸 SIGNALS & ALERTS
On-chart visuals:
• Bull/Bear belt zones with ATR-scaled width and mid-line
• Impulse origin markers (small triangles) anchoring each belt to its source bar
• State-colored labels at resolution: Held OK (state color), Broken X (opposite state color), Rejected (neutral, shown only in Detailed label mode)
• Faded rendering for resolved belts so the active story stays visually dominant
Top-right status panel:
• Active belt count
• Current belt context (side, position, held flag)
• 50-bar directional bias (Bull UP / Bear DN / Neutral)
• 50-bar outcome counts (Held / Rejected / Broken)
Alert conditions:
• Repricing Belt Formed
• Belt Touched (first qualifying revisit)
• Belt Held
• Belt Rejected
• Belt Broken
🔹 KEY INPUTS
Engine
• Impulse Threshold (x ATR) — impulse size gate
• Min Body / Range Ratio — decisive-close gate
• ATR Length — volatility normalization period
• Cooldown Between Belts — anti-clustering filter
Belt
• Width Mode — ATR Scaled / Auto (Body) / Body 70%
• ATR Width Half-Span — belt half-width in ATR units
• Belt Max Lifetime — auto-expiry age
• Max Active Belts — concurrent belt cap
State Thresholds
• Min Touch Depth (x ATR) — qualifying penetration
• Hold Tolerance (x ATR) — clean-hold excursion ceiling
• Reject Tolerance (x ATR) — rejected-vs-broken threshold
Visuals
• Label Mode — Clean / Detailed
• Panel Font Size, Label Font Size
• Show Impulse Markers toggle
🔸 HOW TO USE
1. Apply to any symbol and timeframe. The engine is timeframe-agnostic and self-calibrates via ATR.
2. Watch for new belt formations on displacement impulses. The impulse marker confirms the origin bar.
3. When price returns, observe the lifecycle resolution: Held reactions often mark continuation points; Broken reactions frequently signal structural shifts.
4. Use the 50-bar Bias readout for directional context — sustained one-sided belt formation suggests an active trend.
5. Combine with structure tools (swing highs/lows, trendlines) for confluence. The belt is a reaction zone, not a standalone entry system.
6. Tune Impulse Threshold per timeframe: lower values (1.5–1.7) for intraday, higher (1.8–2.2) for swing.
🔹 LIMITATIONS & TRANSPARENCY
• This indicator is not a strategy and does not generate buy/sell signals. It is an analytical visualization tool.
• Belt outcomes are historical observations, not predictions. Past Held/Broken patterns do not guarantee future reactions.
• Performance varies by symbol, timeframe, and market regime. Always test parameter settings on the instruments you trade.
• Very low-liquidity or gappy symbols may produce noisy impulses. Increase Impulse Threshold or Min Body Ratio for cleaner selection.
• The Max Active Belts cap intentionally limits chart information to keep focus on the current context — raise it only if your workflow benefits from longer belt history.
⚠️ RISK DISCLOSURE
This script is provided for educational and analytical purposes only. It is not financial advice and does not constitute a recommendation to buy, sell, or hold any asset. Trading involves substantial risk of loss. Always conduct your own analysis, manage risk responsibly, and never trade with capital you cannot afford to lose. Past performance of any pattern or setup is not indicative of future results.
Published as Public / Open-source under Mozilla Public License 2.0. Indicator
Rejection Block Quality [AGPro Series]Rejection Block Quality
🔹 OVERVIEW
Rejection Block Quality is an ICT-inspired detector that identifies long-wick rejection candles at swept swing pivots and grades each block by objective quality criteria. Unlike Order Block logic — which anchors to the last opposite-direction body before displacement — a Rejection Block (RB) is born from a wick that pierces a prior swing liquidity pool and closes back inside it, with the body confirming displacement on the follow-through bar. The rectangle is drawn from the wick base to the candle body, capturing the exact zone where smart money absorbed the sweep.
🎯 UNIQUE EDGE
Three design choices separate this tool from generic wick or order block indicators:
• Swing-pivot sweep requirement — a rejection is only counted when price sweeps a confirmed swing high or low before the reversal close. Stand-alone wick patterns without liquidity context are filtered out.
• Displacement confirmation window — the candle following the rejection must travel at least 0.6× ATR in the reversal direction, within a 1–5 bar lookahead. No displacement, no block.
• Quality tiering (A / B / C) from three orthogonal factors — wick-to-body ratio, displacement magnitude, and untested freshness. An exceptional wick ratio (≥5× body) promotes a block to A tier regardless of other scores, preserving rare high-conviction rejections.
🛠️ METHODOLOGY
Detection pipeline on every bar:
1. Confirm a pivot sweep using a user-configurable lookback (default 5 bars each side).
2. Check the wick-to-body ratio against a minimum threshold (default 1.8×), with the dominant wick on the sweep side.
3. Queue the candle as a pending block and wait for displacement confirmation.
4. Measure displacement as price travel from the body reference over 1 to 5 bars, normalized by ATR.
5. On confirmation, draw the RB zone from the wick base to the body, record the tier, and begin lifecycle tracking.
Zone lifecycle tracks four events — test (price enters the zone), hold (price exits without a body close through the far edge), break (body close through the far edge), and near miss (price approaches within a configurable ATR band without entering). All events are edge-detected to prevent inflated counts when price lingers near a zone.
📊 SIGNALS & ALERTS
• New block formation label — A / B / C tier plus wick ratio, placed with anti-collision offset.
• Test markers (T) — one per zone entry event, with cooldown to prevent visual clutter.
• Break markers (B) — placed when a zone is invalidated by a body close.
• Wick border highlight — thick colored line on the originating rejection candle.
• Alerts — configurable minimum tier (A, B, or C) fires once per bar close for each qualifying new block.
⚙️ KEY INPUTS
• Detection — Pivot Length, Min Wick-to-Body Ratio, ATR Length, Min Displacement (× ATR), Displacement Confirm Window.
• Zone Management — Max Active Zones per Side, Zone Right Extension, Near-Miss Distance, Near-Miss Cooldown, Break Requires Full Body Close.
• Visuals — Show Zones, Show Tier Labels, Highlight Rejection Wick Border, Show Test / Hold / Break Markers, Zone Fill Opacity, Label Font Size.
• Panel — Show Panel, Panel Location, Panel Font Size, Panel Theme (Dark / Light).
• Alerts — Minimum Tier for Alerts.
🧭 HOW TO USE
Start on a higher timeframe (4H or 1D) to identify macro RB zones, then drill down to execution timeframes for entries. Treat A-tier blocks as the highest-conviction zones, B-tier as situational, and C-tier as context-only. Combine with trend filters, higher-timeframe structure, and risk management — a Rejection Block is a zone of interest, not a standalone buy or sell signal. Use the panel statistics to evaluate how the selected symbol and timeframe have historically respected these zones before committing to them in live decision-making.
⚠️ LIMITATIONS & TRANSPARENCY
This indicator is a structural detector, not a trading strategy. It does not forecast price direction, generate entry or exit orders, or calculate position sizing. The Success Rate statistic reflects how often past tests on detected zones held versus failed within the visible history — it is a descriptive metric, not a performance projection. Zone detection is historical and reactive: a block only appears after the displacement bar closes, so interpretation on live-forming bars is tentative. Performance varies by symbol, timeframe, and market regime.
⚠️ RISK DISCLOSURE
Trading involves substantial risk of loss. Past behavior of any pattern does not guarantee future outcomes. Use this tool as part of a complete analytical framework that includes your own risk management, position sizing, and broader market context. Nothing in this indicator or description constitutes financial advice. Indicator
Liquidity Void Navigator [AGPro Series]Liquidity Void Navigator
🔹 OVERVIEW
Liquidity Void Navigator identifies impulsive price displacements that were produced with disproportionately low volume participation — the institutional footprint of a true liquidity void. Unlike geometric gap concepts that rely purely on wick-to-wick imbalance, this engine measures the efficiency of each impulsive bar: how much price moved relative to how much volume was transacted. When price travels faster than the order book justifies, a magnet zone is born. These zones frequently act as high-probability retest and mean-reversion targets for SMC and ICT traders.
🔹 UNIQUE EDGE
Most gap-based tools on PulseWire detect Fair Value Gaps using a 3-bar geometric pattern. This indicator uses a fundamentally different signature:
- Volume Efficiency Ratio (core innovation): efficiency = (volume / avgVol) / (range / ATR). Values below the threshold reveal bars where price displacement outpaced volume effort — the statistical definition of a liquidity void.
- Body-based zones, not wick-to-wick: the void box spans the impulsive candle body, excluding wicks that represent liquidity sweeps.
- Dynamic lifecycle management: zones are tracked from birth through mid-line mitigation, with configurable trigger modes (close cross, wick touch, or full fill).
- Strongest-void emphasis: the lowest-efficiency active void automatically receives a bold neutral-colored border, giving traders an at-a-glance view of the most reliable magnet on the chart.
🔹 METHODOLOGY
Each completed bar is evaluated against four quality filters:
1. Range Expansion — bar range must exceed ATR × configurable multiplier (default 1.3).
2. Volume Efficiency — the efficiency ratio must fall below the configurable cap (default 0.85).
3. Minimum Height — void must be at least a fraction of ATR to filter micro-noise (default 0.5×).
4. Body Dominance — the candle body must represent at least 50% of the total range, confirming directional conviction rather than indecision.
Qualifying bars create a directional void zone spanning the body. An optional next-bar gap confirmation adds stricter FVG-style filtering. Active zones are continuously evaluated against the selected mitigation mode and updated in real time. Oldest active voids are pruned when the per-side cap is exceeded, keeping the chart focused on recent, actionable structure.
🔹 SIGNALS & ALERTS
Four alert conditions are available:
- New Bullish Liquidity Void — an upward impulsive void is detected.
- New Bearish Liquidity Void — a downward impulsive void is detected.
- Bull Void Mitigated — closing price crosses the mid-line of an active bullish void from above.
- Bear Void Mitigated — closing price crosses the mid-line of an active bearish void from below.
Each alert fires only on bar close to eliminate repainting concerns. Alert messages include the ticker and timeframe for multi-chart workflows.
🔹 KEY INPUTS
Void Detection
- Volume Baseline Lookback — window for average volume and range calculations.
- Min Range Expansion (×ATR) — minimum impulsive bar size.
- Max Volume Efficiency Ratio — core void qualification threshold.
- Min Void Height (×ATR) — filters micro-voids.
- Require Gap with Next Bar — optional strict confirmation.
- Mitigation Trigger — choose between Close Cross (institutional default), Wick Touch (strict), or Full Fill (swing).
Lifecycle
- Max Active Voids per Side — visual cap to prevent chart clutter.
- Zone Right Extension — how far zones project to the right.
- Show Mitigated Voids — optionally display filled zones in gray.
Visuals
- Bullish / Bearish / Mitigated colors, mid-line toggle, projection arrow toggle, label size.
Panel
- Show / position / font size.
🔹 HOW TO USE
Trend-aligned reversion entries: When price returns to an unmitigated void in the direction of the higher-timeframe trend, watch for rejection at the mid-line or far edge as a potential long (bull void) or short (bear void) trigger.
Breakout continuation context: Newly formed voids in the direction of a breakout often indicate institutional participation. Waiting for a retest of the void zone can provide improved risk-to-reward compared to chasing the breakout bar.
Strongest-void bias: The yellow-bordered void on the chart represents the lowest-efficiency (statistically strongest) active zone. Traders can treat it as the highest-probability magnet for price revisits.
Fill Rate context: A persistently high fill rate on a given symbol or timeframe indicates that voids fill rapidly — more suitable for scalping. A lower fill rate suggests that unfilled voids accumulate meaningfully, offering swing-style opportunities.
Multi-timeframe workflow: Identify voids on a higher timeframe (4H or 1D) as strategic bias zones, then use a lower timeframe (15m or 1H) for tactical execution when price approaches those higher-timeframe voids.
🔹 LIMITATIONS & TRANSPARENCY
- This indicator is built for liquid markets with reliable volume data. Thinly traded symbols or instruments without accurate volume feeds (some spot FX, certain indices) will produce unreliable results.
- Not every detected void will be retested or filled. Voids are statistical zones of interest, not guarantees.
- The indicator is a visualization and analytical tool, not a trading strategy. It does not generate buy or sell recommendations.
- Fill rate statistics are computed over the visible history of active and mitigated voids and are approximate; they are intended as a relative gauge of symbol behavior, not as a backtested performance metric.
- Mitigation triggers are bar-close based to avoid repainting. Intrabar signals may appear and disappear until the bar confirms.
- Zones have a fixed right extension from their birth bar; the indicator does not extend zones infinitely.
🔹 RISK DISCLOSURE
Trading financial markets involves substantial risk of loss and is not suitable for all investors. Past performance of any technical indicator, including this one, is not indicative of future results. This tool is provided for educational and analytical purposes only and does not constitute financial advice, investment recommendations, or solicitation to trade. Users are solely responsible for their own trading decisions, risk management, and outcomes. Always conduct independent analysis and consult with a qualified financial advisor before making investment decisions. Indicator
Power of Three (AMD) Map [AGPro Series]Power of Three (AMD) Map
🔹 Overview
The Power of Three (AMD) Map visualizes ICT's foundational session-framework concept directly on the chart: Accumulation → Manipulation → Distribution. For each daily or weekly session, the indicator automatically segments the AMD phases, detects classic liquidity sweeps during Manipulation, and projects a distribution target based on the accumulation range. Built for ICT / Smart Money Concept traders who want session-aware bias, transparent sweep validation, and forward-looking expansion projections.
🔹 Unique Edge vs Other PO3 Scripts
Most PO3 indicators on PulseWire simply highlight time-based session blocks and leave liquidity detection to the user's eye. This implementation distinguishes itself through:
• Phase detection by bar count, not timestamps — ensuring consistent AMD ratios across every timeframe from 15m to 1D
• Adaptive sweep confirmation — accepts both same-bar ICT-strict sweeps (wick + close-back) and 2-bar delayed confirmations, significantly improving setup capture without sacrificing quality
• Dual-reference sweep logic — checks both the previous session's accumulation range AND the current session's accumulation range, capturing sweeps that single-reference scripts miss
• TF-adaptive target multiplier — Daily sessions project targets at 0.7× accumulation range, Weekly sessions at 0.3×, aligned with realistic crypto volatility profiles
• Transparent dual-KPI panel — separates Sweep Rate (how often valid sweeps occur) from Target Hit rate (how often the projected expansion completes), giving traders honest, verifiable performance metrics
🔹 Methodology
Each session is divided into three bar-count-based windows:
• Accumulation (first 33% of expected session bars) — tracks the initial range
• Manipulation (next 17%) — scans for liquidity sweeps against the previous session's accumulation high/low and the current accumulation extremes
• Distribution (remaining 50%) — the expected expansion phase, measured against the projected target
A valid Manipulation sweep requires a wick penetrating a reference level followed by a body close back inside (classic ICT definition). In Adaptive mode, sweeps can also confirm within a 2-bar window. The detected sweep direction determines the PO3 bias: sweeping a high produces a Bearish PO3 (expected downside distribution); sweeping a low produces a Bullish PO3 (expected upside distribution). A target price is projected from either the accumulation midpoint (default, symmetrical expansion) or the sweep extreme, multiplied by the configured ratio.
🔹 Signals & Alerts
Four built-in alert conditions:
• Manipulation phase started — Accumulation complete
• Bullish sweep detected — Low was swept, Bullish PO3 forming
• Bearish sweep detected — High was swept, Bearish PO3 forming
• Distribution target hit — Expansion reached projected level
🔹 Key Inputs
• Session Scope — Auto (TF-adaptive), Daily, or Weekly
• Accumulation / Manipulation window percentages (defaults 33% / 17%)
• Sweep Reference — Previous Accumulation, Current Accumulation, or Both (default)
• Sweep Confirmation — Strict (same-bar) or Adaptive (up to 2-bar, default)
• Target Projection Method — From Accumulation Mid (default) or From Sweep Extreme
• Multiplier Mode — Auto TF-adaptive (default) or Manual
• Historical sessions to display (default 5, max 10)
• Full visual customization — colors, label position, font size, panel position & theme
• Premium visuals — sweep triangle markers, target price label (toggleable)
🔹 How to Use
1. Add the indicator to any crypto or forex chart with timeframe 1H–4H (for Daily PO3) or 1D (for Weekly PO3)
2. Watch the Accumulation range form at the start of each session — this defines the sweep reference level
3. When Manipulation phase begins, monitor for a wick that sweeps the previous accumulation high/low with a body close-back (triangle marker appears on confirmed sweeps)
4. Once a sweep confirms, the panel displays the directional bias (Bullish/Bearish PO3), the projected target price, and a dashed target zone extends toward the session end
5. Use the Sweep Rate and Target Hit percentages in the panel to contextualize reliability on your chosen symbol and timeframe
6. The panel's Completion counter grows as new sessions close — give the script enough historical bars to build meaningful statistics
🔹 Limitations & Transparency
• AMD phase windows are bar-count approximations — real sessions do not cleanly segment into 33/17/50 splits. The indicator is a structural guide, not a timing oracle
• Sweep detection requires the chart timeframe to contain at least 4 bars per session. On 1D charts, use Weekly mode; on 1W charts, the indicator will display a warning
• The projected target is a statistical expectation based on the accumulation range. The Target Hit rate (shown in panel) reflects the historical frequency of this expectation being met on the current symbol/timeframe — typically 40–55% on crypto majors
• Sweep Rate shows the percentage of completed sessions where a valid Manipulation sweep was detected; sessions without sweeps produce no bias and no target
• Historical statistics accumulate from the first bar available on the chart and reset only when the chart reloads
🔹 Risk Disclosure
This indicator is a visualization and analysis tool. It does not generate trade signals, predict price movement, or guarantee outcomes. Past Sweep Rate and Target Hit statistics reflect historical behavior only and do not imply future performance. All trading decisions and risk management remain the responsibility of the user. Indicator
Silver Bullet Window Map [AGPro Series]Silver Bullet Window Map
🔹 Overview
Silver Bullet Window Map is a precision time-based tool that maps the three classic ICT "Silver Bullet" kill zones — compact 1-hour windows where institutional order flow is statistically concentrated — and automatically detects Fair Value Gap (FVG) imbalances formed inside each window. Instead of cluttering the chart with session-wide structures, the script isolates only the high-probability time periods ICT scalpers actually trade, rendering each window as a clean vertical zone with a live countdown, pulse highlight on the active window, and a lifecycle S/R zone for every FVG that prints during the window.
🔸 Unique Edge
Most Silver Bullet scripts either draw static colored backgrounds with no analytical value, or detect FVGs across the entire session and overwhelm the chart. This script does neither. It enforces a strict discipline: FVGs are only drawn if they form INSIDE an active Silver Bullet window. Outside-window price action is deliberately ignored. The result is a chart where every marked imbalance carries ICT-legitimate timing context — not noise. Each FVG becomes a horizontal lifecycle zone (bull or bear) that extends forward in time and is dimmed automatically when mitigated, giving you both a real-time map and a historical window-quality record in one view.
🔹 Methodology
The indicator evaluates the current bar's hour and minute in a user-selectable timezone (New York default, per ICT standard) and identifies three windows: London (03:00–04:00), AM (10:00–11:00), and PM (14:00–15:00). During each window, a three-bar FVG check is performed on confirmed bars: a bullish FVG requires the current bar's low to exceed the high two bars back; a bearish FVG requires the current bar's high to fall below the low two bars back. Gaps are filtered by a user-tunable ATR(14) multiplier to reject insignificant imbalances. Valid FVGs are rendered as time-anchored rectangular zones that extend a configurable number of bars into the future and are marked as mitigated the moment price revisits the opposite side of the gap.
A built-in timeframe guard disables rendering on timeframes of 1 hour and above, because Silver Bullet windows are exactly 1 hour long and cannot be resolved by bars equal to or larger than the window itself. On HTF charts, the panel displays a clean warning message instead of a broken visual.
🔸 Signals & Alerts
Four alert conditions are available: London window open, AM window open, PM window open, and window close. The script is designed for discretionary use — it does not issue buy/sell signals. Its purpose is to put the trader inside the correct time context with the correct structural references, and to let the trader read price action within that context.
🔹 Key Inputs
• Timezone: New York / London / UTC / Exchange
• Historical window depth: 1–30 days
• Individual toggles and custom colors for each of the three windows
• Active-window pulse effect (on/off)
• FVG detection (on/off), minimum size as ATR multiple, zone extension in bars
• Mitigation behavior: dim inactive zones or remove them
• Panel position, theme (Dark/Light), and font size
• Window labels and FVG labels: independently toggleable, font size configurable
🔸 How to Use
Best deployed on 1m–30m intraday charts where the 1-hour windows are visually meaningful. The AM window (10:00–11:00 NY) is historically the most actionable for US equities, indices, and major FX pairs. Wait for a window to open — the background lights up, the panel shows ● LIVE, and the window label appears above the opening candle. Look for a displacement candle creating an FVG inside the window. Use the FVG zone as a retest entry reference with risk defined beyond the gap. The panel's countdown and per-window FVG tally help you gauge window quality in real time. At the end of each day, the L / AM / PM tally shows which window produced the most imbalances — a quick read on session character.
🔹 Limitations & Transparency
This indicator does not predict direction. It does not backtest or display historical win rates — such figures on a time-window tool would be statistically misleading without an execution model. FVG detection uses the standard 3-bar definition; alternative definitions (implied fair value, BPR, inversion FVGs, etc.) are not covered by design. The tool is timezone-sensitive: if your data feed's timestamps drift from the selected timezone's DST boundaries, window alignment can shift by one bar around DST transitions. On timeframes equal to or greater than 1 hour, the script deliberately disables all rendering to avoid producing a misleading visual.
🔸 Risk Disclosure
This script is provided for educational and analytical purposes only. It does not constitute financial advice. Trading leveraged instruments carries substantial risk of loss. Past price behavior around kill zones does not guarantee future results. Use proper risk management and position sizing at all times. Indicator
Head & Shoulders Auto Detector [AGPro Series]Head & Shoulders Auto Detector
🎯 **Overview**
Head & Shoulders Auto Detector is a precision pattern recognition tool that automatically identifies classic Head & Shoulders (bearish) and Inverse Head & Shoulders (bullish) reversal formations across any market and timeframe. Built from the ground up for traders who want the full lifecycle of a pattern tracked on-chart — not just a label and a line, but forming → confirmation → target/stop outcome — with a transparent, quality-scored framework that filters low-probability setups before they clutter the chart.
Every pattern carries a composite quality score, a symmetry percentage, an ATR-adaptive neckline, two projection targets, and a live status label that evolves through the pattern's lifespan.
🔹 **Unique Edge**
Most H&S indicators stop at detection. This one goes further:
• **Full lifecycle state machine** — every pattern moves through four explicit states (Forming → Confirmed → Target Hit / Stopped / Invalidated / Expired), and the visuals update in real time at each transition.
• **Dead pattern hygiene** — once a pattern fails or hits target, orphan TP and stop lines are removed, the neckline freezes at the decision bar, and the status label grays out. The chart never accumulates stale clutter.
• **Quality-driven visual hierarchy** — high-quality patterns (Q≥75) are rendered with a star marker and full saturation, mid-tier patterns get standard treatment, and low-tier patterns (Q<60) fade into the background so the trader's eye is guided to what matters.
• **Dual-target projection with R:R** — every confirmation displays both a classic measured-move TP1 and an extended 1.618× TP2, each labeled with the exact reward-to-risk ratio calculated at entry.
• **ATR-adaptive everything** — shoulder tolerance, neckline flatness, head prominence, stop buffer, and label offsets all scale with volatility, so the same settings work across BTC 4H, gold daily, or small-cap stocks.
🔹 **Methodology**
Patterns are detected from confirmed pivot highs and lows using a configurable pivot length. For a valid Head & Shoulders, three same-side pivots (Left Shoulder → Head → Right Shoulder) must satisfy:
• Head extends beyond both shoulders by at least the configured ATR multiple (prominence test).
• Shoulder heights differ by less than the shoulder tolerance in ATR units (symmetry test).
• Two opposite-side pivots between LS-Head and Head-RS define the neckline; their vertical distance must be within the neckline tolerance.
• Composite symmetry score (50% time symmetry, 50% price symmetry) must exceed the minimum threshold.
Quality score combines four weighted components:
• Symmetry (45%) — time + price balance between shoulders
• Neckline flatness (25%) — how horizontal the neckline is
• Volume profile (15%) — head-bar volume relative to shoulder average
• Head prominence (15%) — how clearly the head dominates
Confirmation triggers when price closes beyond the neckline level (interpolated for sloped necklines). Stop is placed at the head level plus an ATR buffer to avoid wick stop-outs. TP1 uses the standard head-to-neckline measured move; TP2 extends to 1.618× that projection.
🔹 **Signals & Alerts**
Four alert events available:
• **Pattern Forming** — a valid H&S or Inverse H&S structure has been detected but not yet confirmed.
• **Pattern Confirmed** — close has broken the neckline; entry is live with TP/Stop drawn.
• **Target Hit** — TP1 has been reached on a confirmed pattern.
• **Neckline Retest** — after confirmation, price has returned to touch the neckline (common high-probability re-entry zone).
🔹 **Key Inputs**
• **Pivot Length** — controls swing-point sensitivity
• **Min Symmetry Score** — minimum shoulder symmetry percentage to accept a pattern (default 60, balanced)
• **Neckline Tolerance (ATR)** — how sloped a neckline is allowed to be
• **Shoulder Height Tolerance (ATR)** — how different the two shoulders can be
• **Head Prominence (ATR)** — minimum head extension beyond shoulders
• **Volume Soft Confirmation** — toggle volume influence on quality score
• **TP1 Method** — Classic (horizontal neckline reference) or Measured Move (slope-aware)
• **Stop Buffer (ATR)** — extra room beyond the head level (default 0.35)
• **Max Pattern Lifetime** — bars after which an unconfirmed pattern expires
• Full visual controls: font size, panel position, theme, zone display, label offset, color palette
🔹 **How to Use**
1. Apply the indicator to any liquid market and timeframe. 4H and higher tend to produce the most reliable formations; intraday works but expects more noise.
2. Watch for patterns labeled with a ⭐ and bright color (Q≥75) — these are the highest-confidence setups.
3. Wait for the ✓ Confirmed status to appear before entering; the ⚡ breakout marker pinpoints the exact confirmation bar.
4. Use the TP1 / TP2 R:R labels to size the trade. Stop is pre-calculated at head level + ATR buffer.
5. Monitor the panel stats over time to understand the indicator's behavior on your specific market — Win Rate, Avg Quality, and Last Signal all update live.
6. Consider combining with trend context (a bearish H&S is far more powerful at resistance in a downtrend than in the middle of a strong uptrend).
🔹 **Limitations & Transparency**
• Pattern detection uses confirmed pivots, so signals appear with a natural delay equal to the Pivot Length setting. This is intrinsic to pivot-based logic, not a flaw.
• Quality score and historical win rate are chart-native calculations based on the loaded history; they are descriptive, not predictive.
• The script does not include multi-timeframe confluence or trend filters — these are deliberate design choices to keep the tool focused and composable with other indicators.
• Volume confirmation is a soft scoring input, not a hard filter, since many crypto pairs and indices have volume data of variable reliability.
• Pattern state transitions use close-based confirmation; intrabar wicks do not trigger state changes except for stop/target hits, which are high/low based as expected.
🔹 **Risk Disclosure**
This indicator is an analytical tool, not a trading recommendation or financial advice. Pattern recognition describes what has formed on a chart; it does not predict future price movement with certainty. Always use proper risk management, position sizing, and confirm signals with your own analysis. Past pattern statistics shown on the panel are descriptive of the visible history and do not guarantee future performance. Trading involves substantial risk of loss. Indicator
Cumulative Volume Delta Flow [AGPro Series]Cumulative Volume Delta Flow
🔹 **Overview**
Cumulative Volume Delta Flow is a hybrid CVD engine designed to expose order-flow imbalances without requiring footprint charts or exchange-native buy/sell data. It reconstructs cumulative delta using lower-timeframe breakdown when available, with intrabar polarity as a universal fallback — making it work on every symbol and every timeframe. On top of this engine, a triple-layer divergence detector identifies Regular, Hidden, and statistical Exhaustion signals, and every signal is scored by its own statistical strength with a ★/★★/★★★ rating system printed directly on the label.
The indicator is built for traders who want smart-money context at a glance: when buyers are absorbing, when a rally is losing real participation, and when a climactic flush is likely to reverse — with an immediate visual cue of how strong each signal is relative to the recent flow regime.
🔹 **Unique Edge**
Most CVD indicators are single-mode: either they plot cumulative delta, or they call a Regular divergence. This script combines four layers that rarely appear together in one tool:
- Hybrid engine with transparent fallback (no silent failure on high TFs)
- Exhaustion detection based on standard-deviation of CVD change, not price — catches reversals that price-only divergence misses
- Per-signal ★/★★/★★★ strength rating using type-specific statistical metrics (pivot-gap σ for Regular/Hidden, change σ for Exhaustion), so traders instantly know which signals deserve attention
- Optional reaction zones anchored at flow-driven pivots, behaving as dynamic support/resistance born from real participation events rather than pure price structure
🔹 **Methodology**
- The engine computes two parallel delta streams every bar: an intrabar polarity stream (weighted by wick balance for neutral/doji candles) and a lower-timeframe stream that iterates sub-bars and signs each by its close-vs-open direction
- In Hybrid mode, the LTF stream is preferred when it yields a non-zero value; the intrabar stream is used as fallback so the indicator never goes blank on exotic tickers or high timeframes
- A session/daily/weekly reset prevents long-run drift and keeps the cumulative counter meaningful across regime changes
- Pivots are detected on both price and CVD with a shared lookback window; the last two price pivots and their paired CVD values are tested for all four classical divergence relationships
- Exhaustion is a separate statistical trigger: the single-bar CVD change is compared against a 50-bar standard deviation; a σ breach in the direction opposite to the candle body is flagged as climactic absorption
- Each divergence label is rated with stars based on its type: Regular and Hidden use the CVD-pivot gap normalized by 50-bar CVD level stdev (how far apart the two flow pivots are), while Exhaustion uses the σ multiple of the current CVD change (how extreme the climactic event is)
- A cooldown window suppresses signal clustering in chop, and labels are offset by ATR-scaled distance with a leader line so they never collide with candles
🔹 **Signals & Alerts**
On-chart labels with star rating:
- Reg Bull / Reg Bear ★-★★★ — classical reversal divergence (price exhausts, flow refuses)
- Hid Bull / Hid Bear ★-★★★ — continuation divergence (pullback inside an active trend)
- Exh Bull / Exh Bear ★-★★★ — statistical flow climax above the σ threshold
Star thresholds for Regular/Hidden: ★★★ ≥ 2.0σ gap, ★★ ≥ 1.0σ gap, ★ < 1.0σ.
Star thresholds for Exhaustion: ★★★ ≥ 3.0σ, ★★ ≥ 2.0σ, ★ < 2.0σ (minimum trigger is 1.75σ).
Each signal carries its own color code and a leader line connecting the label back to the source candle for fast visual reading. Six discrete alertcondition slots are exposed plus three proactive alert() calls grouped by divergence family, so traders can route regular, hidden, and exhaustion signals to different channels.
🔹 **Key Inputs**
- Calculation Method: Hybrid, LTF Only, or Intrabar Only
- LTF Resolution: Auto (adaptive by chart TF) or fixed 1 / 3 / 5 / 15m
- CVD Reset: Session, Daily, Weekly, or None
- Pivot Length: 2–15 bars
- Toggles for Regular / Hidden / Exhaustion layers independently
- Exhaustion Threshold (σ): 1.0–4.0, default 1.75
- Min Bars Between Signals: anti-clustering cooldown (default 15)
- Reaction Zones: optional, with ATR width, extend length, and max active cap
- Label Size + Label Offset (ATR) for visual tuning
- Info Panel: 5 positions, 4 text sizes, full hide toggle
🔹 **How to Use**
- On the 4H timeframe, run the defaults on liquid instruments: BTCUSDT, ETHUSDT, SPX, ES, major FX pairs
- Treat ★★★ signals as the highest-priority reads of the chart — these are statistical outliers
- Treat ★★ signals as the normal tradeable population — the bulk of decision-making happens here
- Treat ★ signals as background context — use them for bias confirmation, not as primary entries
- Regular divergences are reversal warnings at structural highs/lows; they are most reliable when aligned with a key horizontal level or trendline
- Hidden divergences are trend-continuation entries during pullbacks inside a confirmed trend
- Exhaustion signals mark participation climaxes and often coincide with short-term reversals even when no classical pivot has formed yet
- Check the Info Panel's Last Signal row for the most recent event type and its star rating without scanning the chart
- Enable Reaction Zones when you want persistent S/R context from flow events; keep them off for minimal, label-only use
- Consider combining with a structure tool from the AGPro Series (SFP, Breaker, Unicorn) for confluence
🔹 **Info Panel**
The compact info panel on the chart surfaces seven live metrics: the current cumulative CVD value, the CVD trend classification (Up/Down/Flat based on price relative to its own EMA 21), the last signal's full name and star rating in color, the rolling divergence count over the last 200 bars (Bull / Bear), and the bar-age of the most recent bullish and bearish events. This gives a full situational snapshot without scrolling.
🔹 **Limitations & Transparency**
- CVD from intrabar polarity is an approximation, not true tick-level order flow. Exchange-native buy/sell volume is only available through footprint data
- On very high timeframes (Daily+), LTF breakdown may return partial data; Hybrid mode is recommended
- Divergence signals appear only after both pivot legs are confirmed; the second pivot needs `pivotLen` bars of right-side confirmation, so signals print with that lag
- Exhaustion requires at least 50 bars of CVD history for the standard-deviation baseline
- Star ratings are statistical descriptors of signal strength relative to recent flow, not trade-quality guarantees
- Past performance of any divergence pattern does not guarantee future results; this tool surfaces probabilistic context, not guaranteed reversals
🔹 **Risk Disclosure**
This indicator is an analytical framework, not a trading system or financial advice. Signals are technical observations intended to support decision-making; they do not account for fundamentals, news, liquidity, or your risk tolerance. Always use proper position sizing, stop-loss placement, and risk management. Test the tool on historical data and in a simulated environment before deploying it on live capital. Trading carries risk of substantial loss. Indicator
Unicorn Model Detector [AGPro Series]Unicorn Model Detector
Overview
The Unicorn Model Detector identifies one of the most discussed setups in Inner Circle Trader (ICT) and Smart Money Concepts literature: the Unicorn Model. A Unicorn forms when a Breaker Block and a Fair Value Gap (FVG) overlap inside the same price zone — a pocket where prior swing liquidity has been swept and an unfilled imbalance still exists at the retest. The detector scans for these overlaps, tracks every occurrence through its full lifecycle, and reports aggregate statistics in a compact on-chart panel. It is a detection and bookkeeping tool, not a trading strategy.
Unique Edge
Most breaker and FVG scripts publish either zones in isolation or require the user to eyeball the overlap. This detector does the overlap match automatically and only draws a zone when both conditions are present on the same chart area with the same directional bias. A strict causality rule is enforced — the Breaker must form first (after liquidity sweep) and the FVG must appear during or after the retest, which matches the true ICT Unicorn definition. A pairing that consumes a given breaker and FVG is removed from future candidate pools, so the chart never stacks redundant zones from the same source structure. A Loose overlap mode is also provided for users who prefer an ATR-based proximity interpretation instead of strict geometric intersection.
Methodology
1. Swing pivots are detected with a configurable left/right length using ta.pivothigh and ta.pivotlow.
2. When a confirmed pivot forms, the body range of the pivot bar is stored as the potential Breaker source zone.
3. A Breaker Block is registered when price closes through the previous-bar swing level in the opposite direction.
4. A Fair Value Gap is registered when a 3-bar formation produces an unfilled imbalance (low > high for bullish, high < low for bearish) and the gap exceeds a user-defined ATR multiple.
5. A Unicorn is spawned when a same-direction Breaker zone and FVG zone overlap vertically AND the FVG formed at or after the Breaker (causality check).
6. A configurable cooldown prevents consecutive spawns from clustering, improving signal hygiene.
7. The overlap rectangle becomes the tracked zone. Zone mid is the reference entry, the stop is placed 0.4 times the zone height beyond the structure boundary, and the target is projected at the user-defined R-multiple.
Signals & Alerts
Four independent alert conditions are exposed:
- New Unicorn Detected — a fresh bullish or bearish Unicorn has just formed.
- Unicorn Triggered — price has entered the overlap zone of a pending Unicorn.
- Target Hit — a triggered Unicorn has reached its R-multiple target.
- Stop Hit — a triggered Unicorn has been invalidated at its stop level.
All alerts fire once per bar close and include the ticker and timeframe in the payload.
Key Inputs
- Swing Pivot Length (default 7) — left/right length used for pivot confirmation.
- Breaker Lookback (default 80 bars) — maximum age for a broken swing to remain a valid Breaker.
- FVG Minimum Size (default 0.25 x ATR) — noise filter for 3-bar imbalances.
- Overlap Mode (Strict / Loose) — geometric intersection vs ATR-tolerance match.
- Reward-to-Risk Target (default 2.0) — multiple used to project the target level.
- Max Active Pending Unicorns (default 3) — chart-cleanliness cap.
- Cooldown After Signal (default 30 bars) — minimum spacing between consecutive spawns.
- Invalidate on Close Through Zone (default off) — optional tighter invalidation rule.
- Visual controls — show/hide per lifecycle state, label size, zone opacity, max recent labels.
- Panel controls — show/hide, location (6 positions), theme (Dark/Light), text size.
How to Use
1. Add the indicator to any timeframe; higher timeframes (1H, 4H, 1D) tend to produce structurally more meaningful Unicorns.
2. Watch for a new Unicorn zone to appear. Pending zones are drawn in the directional state color with a bold border; triggered ones switch to the indigo accent color; TP / SL / Expired zones fade to their respective colors with a thinner border.
3. Each zone carries a tethered flag label outside the price axis — Bullish labels below, Bearish labels above — so they never overlap candles.
4. The panel reports running counts of pending and active Unicorns, historical win rate, average R per setup, and total completed.
5. Use the displayed entry / target / stop reference lines as a structural map for your own analysis. The tool does not place orders and does not recommend position sizing.
6. Combine with higher-timeframe bias (trend, session context, HTF structure) before acting on any zone.
Limitations & Transparency
- The detector is a structural scanner, not a forecasting engine. It reports what has formed, not what will happen.
- Swing detection depends on pivot length; shorter lengths generate more noise, longer lengths miss smaller structures.
- Statistics are calculated on-chart from historical bars loaded by PulseWire and will vary with timeframe, symbol and data range.
- Realtime behaviour: zones are drawn on confirmed events (bar close for breaks, 3-bar-complete for FVGs). Some invalidations are evaluated intrabar on wick touches of the stop level.
- The script is open-source under Mozilla Public License 2.0. Users are encouraged to inspect and adapt the methodology.
Risk Disclosure
This indicator is provided for educational and analytical purposes only. It is not financial advice, a trading signal service, or a strategy. Past structural patterns do not guarantee future outcomes. Trading involves substantial risk of loss; readers are solely responsible for their own decisions and risk management. Indicator
Swing Failure Pattern (SFP) Engine [AGPro Series]Swing Failure Pattern (SFP) Engine
────────────────────────────────────────────────────────────
OVERVIEW
────────────────────────────────────────────────────────────
Swing Failure Pattern (SFP) Engine detects high-probability liquidity sweep
events at prior swing highs and lows. An SFP occurs when price pierces a
recent swing level with a long wick but closes back inside the prior range,
signalling failed continuation and potential mean reversion. Each event is
scored on four components, drawn as a mid-sized support/resistance reaction
zone, and tracked through its live cycle — with panel statistics on MFE,
MAE, and hit rate. Designed for visual pattern reading and confluence;
not a buy/sell system.
────────────────────────────────────────────────────────────
UNIQUE EDGE
────────────────────────────────────────────────────────────
Most SFP indicators mark the sweep candle and stop there. This engine treats
each SFP as a living support/resistance band: the zone extends to the right
every bar and only freezes when the swept level is actually broken on close.
That preserves the SR context that traders use in real decisions, without
cluttering charts with zones that never die. A composite score (0-100),
confluence grouping of nearby events within 0.5 ATR, and live MFE/MAE
tracking in ATR units turn a common pattern into a measurable framework.
────────────────────────────────────────────────────────────
METHODOLOGY
────────────────────────────────────────────────────────────
Swing detection uses pivot highs and lows confirmed by a configurable
lookback. An SFP is confirmed on bar close when four conditions are met:
1. The bar wicks beyond a prior unswept swing high (bearish) or swing low
(bullish) within the active lookback window.
2. The close reclaims the prior range by at least the user-defined ATR
distance (default 0.25 ATR).
3. The sweep-side wick represents at least the minimum wick ratio of total
bar range (default 55 percent).
4. Bar volume exceeds its 20-period SMA by the configured multiplier
(optional, default 1.15x).
Composite score (0-100) weights wick ratio (40), reclaim distance in ATR
(30), volume confirmation (15), and swing age (15). Only events above the
minimum score threshold are drawn. Each confirmed SFP removes its swept
swing from the active array to prevent re-triggering on the same level.
Confluence grouping merges same-side events within 0.5 ATR into a single
labelled zone with an x2, x3 count.
────────────────────────────────────────────────────────────
SIGNALS & ALERTS
───────────────────────────────────────────────────────────
Visual signals on chart:
- State-coloured label at the sweep bar reading Bull SFP or Bear SFP with
the composite score (e.g., Bull SFP 74). Confluence-grouped events are
suffixed with the merge count (e.g., Bear SFP 81 x2).
- Rectangular zone spanning the swept level and the SFP close, with a
small ATR buffer. The zone extends right each bar while active and
freezes in neutral grey when the swept level breaks.
- Dotted horizontal line marking the swept swing level.
- Dashed projection line indicating the reversal direction.
Alert conditions:
- Bullish SFP: fires on the confirmation bar of a bullish event above
the score threshold.
- Bearish SFP: same, for bearish events.
- Zone Invalidation (optional): fires when an active zone's swept level
is broken on close.
────────────────────────────────────────────────────────────
KEY INPUTS
────────────────────────────────────────────────────────────
Detection:
- Swing Pivot Length - bars each side of a pivot (default 5).
- Swing Lookback - how far back active swings are tracked (default 120).
- Min Wick Ratio - minimum sweep wick as fraction of bar range (0.55).
- Min Reclaim Distance (ATR) - how far close must reclaim (0.25 ATR).
- Require Above-Average Volume and Volume Multiplier (default 1.15x).
- ATR Length (default 14).
Scoring & Filters:
- Min SFP Score (default 55 of 100).
- Max Active Zones retained on chart (default 8).
- Stats Timeout - bars after which an unresolved event is counted in
averages (default 30). Does not affect zone visibility.
Visuals:
- Zone transparency (default 80), confluence grouping distance (0.5 ATR),
label size, and toggles for zones, swing lines, and reversal projections.
Panel:
- Location (8 options), Dark/Light theme, text size.
Alerts:
- Independent toggles for bullish, bearish, and invalidation alerts.
────────────────────────────────────────────────────────────
HOW TO USE
────────────────────────────────────────────────────────────
Apply the indicator to any chart and timeframe. Higher timeframes (1h and
above) produce cleaner swings; lower timeframes require a higher Min Wick
Ratio and Min Score to filter noise.
Read SFPs as liquidity sweep events, not standalone entries. A bullish SFP
below a prior swing low indicates that sellers failed to extend the move —
often a location where larger participants accumulate. The score reflects
sweep quality; higher scores (70+) generally correspond to cleaner
rejections. Use the zone as a support/resistance reference until it is
invalidated.
Panel statistics describe the observed sample on the loaded chart, not a
backtested system. MFE Hit Rate is the percent of resolved zones that
reached 1 ATR in the SFP direction before the swept level broke — it is a
quality reference, not a win rate for any trading strategy.
────────────────────────────────────────────────────────────
LIMITATIONS & TRANSPARENCY
────────────────────────────────────────────────────────────
- Signals confirm on bar close; intrabar conditions may change until close.
- Pivot detection introduces a natural bars-of-right-context lag equal to
the Pivot Length. This is intrinsic to any pivot-based approach.
- Panel statistics reflect events visible on the current chart load and
will vary with timeframe, symbol, and bar range.
- MFE Hit Rate is not a profit expectation. It measures whether price
moved 1 ATR in the SFP direction before the swept level broke.
- Volume confirmation uses chart volume and may behave differently on
symbols with inconsistent volume data.
- The indicator uses standard Pine Script drawing objects. Chart reload
may reset ephemeral visual states of resolved zones.
────────────────────────────────────────────────────────────
RISK DISCLOSURE
────────────────────────────────────────────────────────────
This indicator is a visualisation and analysis tool. It is not a trading
system, not financial advice, and not a signal service. It does not
predict future price movement. All trading decisions carry risk of loss
and are the sole responsibility of the user. Historical pattern behaviour
does not guarantee future results. Test thoroughly on your instruments
and timeframes before making any decisions. Indicator
Judas Swing Detector [AGPro Series]Judas Swing Detector
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The Judas Swing is a well-known intraday pattern in ICT (Inner Circle Trader)
methodology describing how price often makes a deceptive initial move at the
London or New York session open — pulling in participants in one direction —
before reversing to reveal the session's true directional bias.
Judas Swing Detector systematically identifies, visualizes, and tracks this
pattern across every London and New York session open. It shades the trap
zone, flags the reversal bar, highlights the true-direction bias, and maintains
a rolling 20-session performance log so users can assess how consistently the
pattern resolves on their chosen symbol and timeframe.
IMPORTANT — Timeframe requirement: This indicator is designed for intraday
charts of 1 hour or lower (1m, 5m, 15m, 30m, 1h). Session windows anchor the
entire logic, and a 1-hour Judas window cannot be resolved on 4-hour or higher
charts. The panel always shows an "Optimal TF: 1m - 1h" footer, and the TF
status row turns yellow with "use <=1h" if the current chart exceeds this
range.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
UNIQUE EDGE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Unlike generic session-open or breakout indicators, Judas Swing Detector is
built around a defined four-state lifecycle (Pending → Active → Forming →
Confirmed / Failed) with ATR-normalized thresholds, so detection remains
stable across different volatility regimes and asset classes.
Three design choices make it distinct:
1. Independent two-way extremum tracking inside the Judas window — both the
maximum upward and maximum downward excursion are recorded, and the larger
of the two is declared the fake move when the window closes. This removes
ambiguity in choppy openings.
2. Separate fake-move and reversal thresholds. The initial push must exceed
a minimum ATR-scaled size to qualify, and the reversal must travel a second
ATR-scaled distance beyond the session open — filtering out shallow round
trips that would otherwise inflate the signal count.
3. Rolling 20-session statistics panel reporting success rate, average fake
distance, and directional bias, giving discretionary traders an objective
view of how the pattern is behaving on their instrument before they act on
it.
4. Support/resistance-style invalidation zone drawn at the fake-move extremum
after confirmation. This gives a clear visual anchor: if price later
re-enters this zone from the opposite side during the session, the Judas
read is considered broken. The zone is a reference, not an automatic
signal.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
METHODOLOGY
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Step 1 — Session anchoring
At the first bar of the configured London or New York window the script
records the session open price, resets the two-way extremum trackers, and
transitions to the Active state.
Step 2 — Fake-move accumulation
During the window the script tracks both the maximum high and minimum low
relative to the session open. Neither is committed as the fake move until the
window closes.
Step 3 — Window-close evaluation
When the window ends the larger excursion (up vs down) becomes the fake
direction. If its size reaches the user-defined ATR multiple it qualifies and
the script transitions to the Forming state; otherwise it resets to idle.
Step 4 — Reversal confirmation
In the Forming state the script waits for price to cross the session open in
the opposite direction of the fake move and travel at least the configured
ATR-scaled distance beyond it. When that happens the swing is Confirmed and
the true direction is drawn on the chart. If the reversal window expires
without confirmation the swing is recorded as Failed.
Step 5 — History log
Every confirmed and failed outcome is appended to a rolling 20-session log
used by the statistics panel.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SIGNALS & ALERTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
On-chart visuals:
• Dashed vertical line at session start (accent color)
• "LON" or "NY" label at the session anchor bar (Balanced / Detailed only)
• Shaded fake-move box from session open to fake extremum, colored opposite
to the true direction (a bearish trap is shaded in the bear tone because
the true direction is down — and vice versa)
• Optional "Fake" distance label at the extremum (Detailed density only)
• Reversal marker "X UP" or "X DOWN" at the confirmation bar, offset
from the candles for readability
• Horizontal support/resistance-style invalidation zone around the fake
extremum, extending 40 bars to the right — a visual reference for where
the Judas read would break down if price re-enters the zone
Alert conditions (toggle individually in settings):
• Judas Swing Forming — fake move has qualified, waiting for reversal
• Judas Swing Confirmed — reversal threshold crossed, true direction known
• Judas Swing Failed — reversal window expired without confirmation
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
KEY INPUTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Session Windows
• Track London Open — toggle London session monitoring
• London Judas Window (NY time) — session string, default 0200-0300
• Track New York Open — toggle NY session monitoring
• NY Judas Window (NY time) — session string, default 0930-1030
• Session Timezone — timezone used to interpret the windows
• Reversal Window (minutes) — maximum time after window close in which a
valid reversal can still be recorded
Detection Logic
• Min Fake-Move Size (ATR mult) — minimum excursion required to qualify
• Reversal Confirmation (ATR mult) — distance beyond session open needed
to confirm the reversal
• ATR Length — lookback for threshold scaling
Visuals
• Show Session Start Line, Show Fake-Move Zone, Show Reversal Marker,
Show Invalidation Zone — individual visual toggles
• Label Density — Minimal / Balanced / Detailed
• Font Size — tiny / small / normal / large (applies to labels and panel)
• Theme — Dark / Light (panel only, chart candles unaffected)
Panel
• Show Info Panel — master toggle
• Panel Location — 6 chart positions
• Always displays: current session, state, true direction, fake distance,
rolling 20-session statistics (success rate, avg distance, bull/bear
bias), current TF status, and a footer reminding the optimal timeframe
range
Alerts — three individual toggles (Forming / Confirmed / Failed)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO USE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Supported timeframes: 1m, 5m, 15m, 30m, 1h. These resolve a session's early
structure cleanly while keeping enough bars inside each Judas window for the
extremum tracker to work with. Recommended default: 15m or 1h.
Not supported: 4h, 1D, 1W. On these timeframes a single bar exceeds the
session window, so nothing is detected. The panel will show a yellow "use
<=1h" hint if you accidentally switch to one of these.
Recommended instruments: FX majors (EURUSD, GBPUSD, USDJPY), index futures
(NQ, ES), liquid crypto (BTC, ETH). The ATR-normalized thresholds keep the
logic portable across these asset classes.
Workflow suggestion:
1. Apply the indicator and let it observe several sessions so the panel
populates a meaningful sample.
2. Review the 20-session success rate on your specific symbol and timeframe.
This is not a forecast — it is a descriptive statistic of how the pattern
has resolved in recent history on that chart.
3. Use the Forming alert as a heads-up, and the Confirmed alert as the main
event. The true-direction arrow marks the bias of the remaining session,
not a trade entry or exit.
4. Combine with your own structural context — higher timeframe bias, key
levels, liquidity pools — before acting on any signal.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
LIMITATIONS & TRANSPARENCY
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Not a strategy. This is a discretionary analysis tool; it neither places
orders nor implies any specific trade setup.
• Intraday timeframes only. The logic requires 1h or lower charts to resolve
the session windows. On 4h, 1D or higher the indicator will not detect
anything and the panel will show a "use <=1h" notice.
• No forecasting. Displayed statistics describe past behavior on the current
chart only and do not imply future performance.
• Pattern-dependent. When price opens and trends cleanly in one direction
without a fake move, the pattern legitimately will not trigger. Low
signal count on such sessions is expected behavior, not a malfunction.
• Session boundary sensitivity. Results depend on the configured session
windows and timezone. Outside the major FX and equities session hours the
ICT framing may not translate cleanly.
• Extreme-volatility sessions. During very large gaps or news spikes the ATR
thresholds can be dominated by a single bar; users should review the
defaults in those conditions.
• Symbol coverage. Pip conversion handles forex and JPY pairs explicitly and
falls back to tick-based sizing for other asset types. Values are intended
as relative magnitudes, not broker-specific pip quotes.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
RISK DISCLOSURE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This indicator is provided for educational and analytical purposes only. It
does not constitute financial advice, a recommendation, or a solicitation to
buy or sell any instrument. Trading involves substantial risk of loss; past
pattern behavior is not indicative of future results. Users are responsible
for their own trading decisions and for verifying that any signal aligns with
their own methodology and risk management.
The source code is published under the Mozilla Public License 2.0. Feedback
and constructive suggestions are welcome. Indicator
Breaker Block Engine [AGPro Series]Breaker Block Engine
Overview
Breaker Block Engine is a dedicated detection and tracking tool for one of the
most misunderstood concepts in Smart Money trading: the Breaker Block. A
breaker block is an order block that has failed and flipped role — a bearish
order block broken upward now behaves as bullish support, and a bullish order
block broken downward now behaves as bearish resistance. The engine does not
just draw them; it validates each break with displacement strength, tracks
every retest, scores how well each breaker has held its role, and surfaces the
dominant bullish and bearish breakers through a clean info panel.
Unique Edge
Most breaker block scripts stop at drawing a flipped zone. This engine goes
further:
- Each break is validated using an ATR-scaled close-based displacement filter,
optionally combined with above-average volume confirmation, to reject weak
wick-based breaks.
- Every retest of a breaker is counted and evaluated as Held or Lost, and the
state label on the chart shows a live retest hold percentage for each
breaker (for example "Bull Breaker | Held x6 (100%)").
- An invalidation buffer prevents single-wick noise from prematurely killing
otherwise healthy breakers, while genuinely violated zones fade into a gray
"Lost" state and are removed from tracking shortly after.
- Intra-side and cross-side confluence grouping automatically clean up
overlapping labels so the chart stays readable even when several breakers
cluster within half an ATR.
- The info panel summarises the whole picture in one glance: dominant side,
active counts per side, nearest breaker distance in both price and ATR
multiples, and overall retest hold percentage.
Methodology
1. Swing Detection. Confirmed pivot highs and pivot lows are identified using
a configurable pivot length. These pivots anchor the search for order
block candidates.
2. Order Block Candidate. For each confirmed pivot high, the script walks
back up to ten bars looking for the last bearish candle — this is the
bearish order block candidate. The symmetrical process identifies bullish
order block candidates around pivot lows.
3. Break Validation. A candidate is promoted to a breaker only when price
closes past the opposite edge of the order block by at least a
user-defined ATR multiple (default 0.75 × ATR). An optional volume
confirmation filter can additionally require the break candle to trade
above its volume moving average.
4. Retest & Hold Scoring. After formation, each breaker is checked every bar.
If price re-enters the zone and the close respects the breaker's intended
direction, a Hold is recorded; otherwise the retest is counted but not
held. A minimum bar spacing prevents consecutive bars of a sustained
retest from inflating the counter.
5. Invalidation. If price closes past the far edge of the breaker by more
than the invalidation buffer (in ATR), the breaker is marked Lost,
visually faded, and removed from active tracking after a short grace
period.
6. Confluence Grouping. On the most recent bar, breakers whose mid-points
sit within max(0.5 × ATR, 0.5 % of price) of each other have their
overlapping state labels resolved: dead labels yield to alive labels,
older labels yield to newer ones. A cross-side pass prevents stale
opposite-side labels from sitting on top of active ones.
Signals & Alerts
The script provides three alert events:
- New Breaker: fires on the bar a bullish or bearish breaker is confirmed.
- Retest Hold: fires when price retests an active breaker and the close
respects the zone direction.
- Invalidation: fires when an active breaker is broken in the opposite
direction beyond the invalidation buffer.
On-chart signals include the zone itself (coloured by side), a small
directional triangle at the break point, and a dynamic state label on the
right edge showing the breaker's test count and hold percentage.
Key Inputs
- Swing Pivot Length: bars on each side used to confirm swings. Higher values
produce fewer but structurally stronger swings.
- Max Active Breakers per Side: hard cap on simultaneously tracked bullish
and bearish breakers; oldest are pruned when the limit is reached.
- Displacement Strength: ATR multiple required for a close-based break to
validate. Higher values produce fewer, stronger breakers.
- Require Volume Confirmation: when enabled, the break candle must trade
above its volume moving average.
- Invalidation Buffer: ATR buffer added beyond the breaker edge before the
breaker is considered invalidated. Prevents wick-based noise kills.
- Min Bars Between Retests: minimum bar spacing between consecutive retests
of the same breaker, keeping counters from inflating on sustained visits.
- Zone Transparency, Colours, Label & Panel Sizes: full visual control.
- Panel Location, Theme, Far Zone Threshold: the info panel can be placed in
any of six positions, switched between Dark and Light theme, and the
threshold for labelling distant zones as "Far" is user-configurable.
How to Use
- On mid-to-high timeframes (15m and up), leave the defaults. The engine is
tuned for 15m to 4h out of the box but works on any timeframe and
instrument.
- Use the state label hold percentage as a quality gauge. A breaker with a
long history of holds (for example "Held x6 (100%)") has demonstrated
institutional interest at that level; a breaker with mixed results deserves
more caution.
- Use the panel to orient quickly. If the dominant side is Bullish and the
nearest bullish breaker sits within a fraction of an ATR, the chart is in
a supportive regime for long bias; if both nearest values show "Far",
price is floating between structures and caution is warranted.
- Combine with higher-timeframe context. A bullish breaker on the 1h that
aligns with a bullish breaker on the 4h is a stronger zone than either
alone.
Limitations & Transparency
- This is an indicator, not a strategy. It draws zones and tracks their
behaviour; it does not generate buy or sell orders, manage positions, or
calculate performance statistics against a price series.
- Pivot-based detection is inherently lagging by the pivot length: a swing
is only confirmed once the configured number of bars have printed past it.
- Results depend on input choices. Different displacement multipliers, pivot
lengths, and retest gaps will produce different breaker sets. The defaults
are a starting point, not a recommendation.
- No indicator can guarantee future behaviour. A breaker that has held ten
times in the past can fail the next time it is tested.
Risk Disclosure
This script is provided for educational and research purposes only. It is not
financial advice and does not constitute a recommendation to buy, sell, or
hold any instrument. Trading carries substantial risk of loss. Users are
solely responsible for their own trading decisions and risk management. Past
behaviour of a breaker, or of any zone shown by this script, does not
guarantee future results. Indicator
Mitigation Block Quality [AGPro Series]OVERVIEW
Mitigation Block Quality grades every order-block retest as A, B, or C based on
the strength, speed, and follow-through of the bounce after price returns to
the block. Instead of just drawing order blocks and leaving you to guess
which ones matter, the script measures each mitigation objectively and keeps
a live scoreboard of how those reactions have been performing.
The result is an order block tool that tells you two things at once: where
the zones are, and how well price has historically respected them on the
symbol and timeframe you are looking at.
UNIQUE EDGE
Most order-block indicators end at detection. This one begins there. Each
time a block is mitigated, the script measures the reaction over a fixed
window and grades the bounce by its ATR-normalized magnitude. That grade
is then reflected everywhere: on the block border, in the on-chart label,
in the dashboard, and in the historical success-rate statistics.
You also get multi-timeframe context, confluence detection, streak tracking,
and a dynamic setup banner that describes the current price-block
relationship in plain English.
METHODOLOGY
1. Detection. Swing pivots are identified using a configurable pivot length.
The last opposite-colored candle before the pivot forms the order block.
2. Mitigation. A block is mitigated when price re-enters the zone.
3. Grading. After a fixed reaction window, the script measures the peak of
the bounce and normalizes it to ATR. Grade A is a strong bounce, B is
solid, C is weak.
4. Invalidation. A body close beyond the block marks it as invalidated.
Invalidated blocks can be hidden or shown as a dotted reference.
5. Retirement. Blocks retire by age, by distance from price, or when the
per-side cap is exceeded.
FEATURES
- A, B, or C grade assigned to every mitigation (ATR-normalized reaction)
- Reaction trail line on Grade A mitigations showing the bounce extent
- Entry marker (diamond) at the exact mitigation bar of Grade A bounces
- Confluence glow when two or more blocks overlap within 0.5 ATR
- Time-based opacity decay so older blocks recede and fresh ones pop
- Optional pulse animation on A/B blocks while price is inside them
- Price-scale labels tagging each active block's grade and side
- Higher-timeframe alignment check against a configurable HTF structural bias
- Dashboard panel with: active count, tested count, success (current),
nearest-block state (Inside / Touching / distance in ATR), all-time
success rate with stacked distribution bar, last-20 success, health
progress bar, current Win/Loss streak, HTF alignment, and a dynamic
setup banner
SIGNALS & ALERTS
Three alert conditions are provided:
- Grade A Mitigation — a premium-quality bounce has been detected
- Grade B Mitigation — a solid bounce has been detected
- Block Invalidation — an active block has been broken
These are alertconditions and can be configured from the PulseWire
Create Alert dialog in the usual way.
KEY INPUTS
- Pivot Length and Lookback: control how blocks are detected and how long
they stay on the chart
- Reaction Window and Grade Thresholds (A, B in ATR units): define what
counts as a premium, solid, or weak bounce
- Invalidation Mode: choose between body close or wick pierce
- Retire Block Beyond (xATR): automatic cleanup when price moves far away
- Max Active Blocks per Side and Max Visible Labels: keep the chart premium
- Premium Visuals toggles: Reaction Trail, Entry Marker, Confluence Glow,
Quality Heatmap row, Setup Banner, Pulse, Time Decay, Price Scale Labels,
HTF Alignment, Streak row
- HTF for Alignment: the higher timeframe used for multi-timeframe confluence
- Panel location and theme
HOW TO USE
1. Add the script to any chart and timeframe.
2. Read the panel top-down:
- Last 20 breakdown tells you the recent quality regime
- Nearest Block tells you how close the closest active zone is
- All-time and Last 20 success tell you how reliable those zones have been
- Streak gives you momentum context
- HTF Alignment tells you if the bigger picture agrees
- Setup banner describes what is happening right now
3. Look at the chart:
- A/B/C labels on mitigated blocks tell you how those tests resolved
- Reaction trails and diamonds highlight the premium Grade A mitigations
- Confluence glows mark zones where multiple blocks agree
4. Use alerts to get notified when a fresh Grade A or Grade B mitigation
occurs, or when an active block is invalidated.
The tool is designed to help with discretionary analysis. It is not a
trading system and does not generate buy or sell signals on its own.
LIMITATIONS & TRANSPARENCY
- Pivots are confirmed after the swing length completes, so block detection
has a small structural lag. This is inherent to any pivot-based method.
- Grades are assigned after the reaction window closes. A very fresh
mitigation will briefly show "Active" before its grade appears.
- HTF Alignment uses a 50-period simple moving average on the chosen higher
timeframe as a structural bias proxy. It is a context filter, not a
predictive signal.
- All metrics are computed from the visible historical data on the current
chart. Loading more bars will change the all-time statistics.
- The script uses Pine Script v6 drawing objects. Extremely long histories
on very low timeframes may hit PulseWire object limits; the built-in
per-side cap and distance-based retire keep this under control in normal
use.
RISK DISCLOSURE
This script is an analysis aid, not financial advice. It does not predict
future price movement and does not generate trade recommendations. Any
decision to enter or exit a position is the responsibility of the user.
Historical grade distributions are descriptive, not predictive. Past
mitigation behavior on a symbol does not guarantee future behavior.
Trade with risk capital you can afford to lose and use appropriate
position sizing and stop placement.
LICENSE
Released under the Mozilla Public License 2.0. The full source is available
on PulseWire via the Open-Source badge. You are free to study and modify
the code subject to the terms of the license. Indicator
Indicator
Indicator
AG Pro ICT Confluence Score Dashboard [AGPro Series]AG Pro ICT Confluence Score Dashboard
Overview / What it does
AG Pro ICT Confluence Score Dashboard is a panel-first decision support tool built to evaluate whether multiple ICT-style conditions are aligning at the same time. Instead of focusing on a single event in isolation, the script converts several contextual factors into a structured confluence model so traders can quickly assess whether the current environment is weak, building, or high-conviction.
The dashboard tracks a stack of evidence that includes sweep activity, imbalance interaction, block retests, structure shifts, premium/discount location, trap context, session context, higher-timeframe alignment, freshness, and conflict. Those components are summarized into core and effective scores, then translated into a clean bias/state panel. An optional chart layer can display signal tags and a lightweight halo only when stronger threshold conditions are met.
This script is designed for traders who prefer structured context over isolated triggers. It does not attempt to replace discretion, and it is not presented as a one-click signal engine. Its purpose is to help users evaluate whether multiple factors are working together in the same direction, or whether the current picture is mixed and should be treated more cautiously.
What makes the script practical is that it reduces chart-reading friction. A trader can still inspect sweeps, gaps, blocks, structure, and location manually, but the dashboard helps organize that information into a readable hierarchy. This makes it easier to separate random activity from environments where several pieces of evidence are beginning to align.
Unique Edge
The distinctive feature of this script is not that it detects one ICT concept better than every other tool. Its edge comes from treating multiple ICT-style events as parts of a single evidence framework. The dashboard does not simply list conditions; it scores them, weighs context, and highlights whether the active side remains clean or is facing meaningful opposition.
That means the script is less about finding a single pattern and more about measuring alignment quality. A sweep without supportive structure is different from a sweep followed by structure, location support, and a fresh contextual trigger. A gap touch inside a neutral area is different from a gap touch that appears inside a stronger directional stack. By organizing these relationships into a dashboard, the script gives the user a more structured read on what is happening now.
This also separates it from single-purpose tools. AG Pro ICT Confluence Score Dashboard is not a standalone liquidity sweep script, not a standalone FVG script, not a standalone order block script, and not a standalone session indicator. It is a meta-layer built to evaluate whether several pieces of market evidence are converging into a more coherent setup environment.
Methodology
The model begins with a set of factor states derived from recent chart structure. Confirmed pivot swings are used to define recent highs and lows. From there, the engine evaluates conditions such as sweep events, structure breaks, imbalance zones, block interaction, premium/discount location, and trap-style sequences. Each factor can become active for a limited validity window instead of remaining relevant indefinitely.
The script then builds a core score for bullish and bearish context separately. Session logic can add a directional bonus when the active side is aligned with the configured session window. After that, contextual adjustments are applied through higher-timeframe alignment, freshness, and conflict logic. This produces an effective score that attempts to reflect not only how many factors are present, but whether they are present in a cleaner and more supportive sequence.
The dashboard then translates that information into a readable structure: Bull/Bear core values, effective score, net bias, score bar, conflict read, Why Now summary, Sequence summary, and factor-by-factor status rows. The idea is to help the user see both the headline state and the underlying reasons behind it.
Signals & Alerts
The optional chart signals are intentionally restrained. They are meant to mark stronger score states rather than call every minor condition. Signal tags can appear when the configured score threshold is reached, and the visual layer can be limited so the chart stays readable.
Available alert logic is based on state transitions rather than promotional claims. The script can notify when bullish or bearish confluence crosses the configured threshold, when high confluence is entered, and when that state is lost. This keeps the alert structure deterministic and easier to interpret in a workflow.
Key Inputs
Swing Length controls the pivot sensitivity used by the structure engine.
Factor Validity Window defines how long a detected event can continue to contribute to the stack.
Trap Confirmation Window controls how tightly sweep and structure events must cluster to qualify as trap context.
Freshness Window helps determine whether the active side is still recent enough to deserve extra weight.
Conflict Penalty Threshold defines when opposing evidence becomes meaningful enough to reduce the active side.
Alert Threshold sets the effective score level required for stronger signal conditions.
HTF Timeframe and HTF EMA Length define the higher-timeframe directional filter.
Session controls allow users to enable or disable London, New York, and Asia windows.
Dashboard and visual controls manage panel position, theme, text size, signal tags, and halo behavior.
Limitations & Transparency
This script is a context model, not a prediction model. A high score does not guarantee continuation or reversal, and a low score does not mean price cannot move aggressively. The dashboard only summarizes the relationship between the conditions it measures.
Some components rely on confirmed pivot logic. Because pivot confirmation needs bars on both sides, certain structure-related states become available only after that confirmation exists. This is a design choice intended to keep the model structured, but it also means some events are inherently delayed relative to raw price movement.
The script is also selective by design. It does not attempt to represent every possible ICT interpretation, and it does not replace chart reading, risk control, or execution planning. Users should treat it as a decision-support framework that helps organize evidence, not as a substitute for a full trading process.
Risk Disclosure
This indicator is provided for educational and informational purposes only. It does not constitute financial advice, investment advice, or a solicitation to buy or sell any financial instrument. Trading involves risk, and users should rely on their own analysis, risk management, and judgment before making decisions. Indicator
AG Pro BOS & CHoCH Auto Detector [AGPro Series]AG Pro BOS & CHoCH Auto Detector
OVERVIEW / WHAT IT DOES
AG Pro BOS & CHoCH Auto Detector is a market structure overlay designed to organize swing-based price action into a more readable workflow. Instead of leaving the chart covered with disconnected pivot labels or generic break markers, this script tracks structural swing progression, identifies when prior highs or lows are broken, and classifies those breaks as either BOS (Break of Structure) or CHoCH (Change of Character). The goal is not to predict the next move, but to help traders read whether price is continuing an existing structure or beginning to challenge it.
The script monitors HH, HL, LH, and LL development using pivot logic, then uses those reference points to detect structural breaks. A break in the direction of the active structure is treated as BOS, while the first meaningful break against the prior directional structure is treated as CHoCH. This distinction matters because many charts show every break in the same visual language, even though continuation and character shift do not carry the same analytical meaning. Here, those events are separated clearly.
A second layer of usefulness comes from presentation discipline. This script is built to keep structural information visible without turning the chart into a wall of labels. Swing density can be reduced, major structures can be emphasized, and the higher timeframe overlay can remain active in the background to keep local execution aligned with broader structure. The result is a structure map that stays informative without becoming visually noisy.
This tool is intended for traders who already use price structure as part of their chart reading and want a cleaner way to monitor continuation versus transition. It can support discretionary workflows around trend continuation, pullback analysis, structure failure, and higher timeframe context, while still remaining transparent about how its signals are formed.
UNIQUE EDGE
Many market structure tools stop at plotting swing points or printing BOS / CHoCH text when a level is crossed. AG Pro BOS & CHoCH Auto Detector is built around a more organized structure engine approach.
Its edge is not based on trying to forecast direction or force trade entries. Its edge is based on classification, hierarchy, and chart readability:
- It separates continuation breaks from character-change breaks instead of treating all structural violations as equivalent.
- It preserves the swing chain context behind each event, so BOS and CHoCH are not isolated labels detached from surrounding structure.
- It allows confirmation mode selection, so the user can decide whether structure breaks require close confirmation or can react to intrabar violations.
- It includes higher timeframe structure context directly on the chart rather than forcing the user to reconstruct that context manually.
- It includes swing-density controls so the visual output can be kept clean even when structure is active.
This makes the script less like a simple labeling utility and more like a workflow layer for structure-based chart reading.
METHODOLOGY
1) Swing Structure Detection
The script uses pivot-based highs and lows to identify structural reference points. Those pivots are then classified into HH, HL, LH, and LL sequences, allowing the chart to reflect whether structure is strengthening, weakening, or transitioning.
2) BOS Logic
When price breaks a prior structural level in the direction of the active trend, the event is labeled as BOS. In practical terms, this represents structural continuation rather than directional reversal.
3) CHoCH Logic
When price breaks against the previously established directional structure, the event is labeled as CHoCH. This is treated as a possible character shift, not as a guaranteed reversal. It highlights that the prior structure has been challenged.
4) Confirmation Mode
Users can choose whether structure breaks are confirmed by candle close or by intrabar price action. Close mode is more conservative and can reduce noise. Intrabar mode is more responsive and may show earlier breaks.
5) Higher Timeframe Overlay
An optional MTF layer allows the script to bring higher timeframe structure context onto the active chart. This can help users avoid reading local swings in isolation when broader structure is still dominant.
6) Visual Hierarchy
The script uses horizontal structure levels, event labels, optional arrows, controlled swing density, and a compact information panel to keep key structure events readable. The design priority is to preserve analytical clarity.
SIGNALS & ALERTS
This script can generate structure-based alerts for the following event types:
- Bullish BOS
- Bearish BOS
- Bullish CHoCH
- Bearish CHoCH
- Any structure break
These alerts are event-driven and tied to the script's structural logic. They are intended to notify the user when a relevant break occurs according to the selected confirmation mode. They are not trade instructions and should be interpreted within the user's broader process.
KEY INPUTS
Swing Pivot Length
Controls pivot sensitivity. Lower values detect swings faster but may produce more noise. Higher values are more selective.
Confirmation Mode
Choose between Close and Intrabar logic for structure break confirmation.
Max Structures to Show
Limits how many structural events remain plotted on the chart.
Swing Label Density
Lets users choose between fuller swing annotation and a cleaner major-structure view.
Max Swing Labels on Chart
Helps prevent excessive label build-up in active market conditions.
Enable MTF Overlay
Adds higher timeframe structure context to the active chart.
MTF Timeframe
Defines which higher timeframe structure layer is projected onto the chart.
Label Size / Panel Font Size / Line Settings
Allow visual tuning without changing structural logic.
LIMITATIONS & TRANSPARENCY
This script uses pivot-based structure logic. That means swing points are confirmed only after the required pivot bars are completed. Because of this, the tool is confirmation-based by design and does not attempt to label unfinished pivots as confirmed structure.
BOS and CHoCH are structural events, not certainty statements. A CHoCH may signal that the prior directional structure is being challenged, but it does not guarantee a lasting reversal. Likewise, a BOS indicates continuation within the script's structural framework, but not guaranteed follow-through.
The higher timeframe overlay is designed to add context, not to replace direct higher timeframe chart review. Users should still interpret local and higher timeframe structure together rather than relying on a single signal state.
This script is best used as a structure-mapping tool within a broader analytical framework. It is not a standalone trading system, not a predictor, and not a substitute for risk management.
RISK DISCLOSURE
This indicator is for chart analysis and educational use. It does not provide financial advice, does not guarantee outcomes, and should not be treated as a complete trading methodology on its own. Market structure tools can help organize price action, but all trading decisions remain the responsibility of the user.
Indicator
AG Pro Order Block Reaction Quality [AGPro Series]AG Pro Order Block Reaction Quality
OVERVIEW / WHAT IT DOES
AG Pro Order Block Reaction Quality is an overlay tool designed to organize how price interacts with displacement-origin order block zones. The script identifies the last opposite candle before a strong impulsive move, projects that candle as a bullish or bearish order block, and then tracks whether price later respects, reacts to, or invalidates that zone.
The goal is not to treat every order block as equally important. Instead, the script focuses on reaction quality. When price revisits a tracked zone, the script evaluates the behavior around that revisit and converts the response into a structured quality score. This helps separate zones that produce cleaner reactions from zones that fail, weaken, or transition into breaker behavior.
The indicator is built as a chart-organization tool, not as a prediction engine. It is intended to help users study where impulsive moves originated, how later revisits behaved, and whether those revisits showed clean rejection, weak response, or invalidation. In that sense, the script is less about drawing boxes and more about mapping reaction structure around previously important displacement areas.
Because order block concepts are often displayed in a highly subjective way, this script uses deterministic conditions to reduce ambiguity. Impulse detection, order block selection, reaction-window scoring, and breaker conversion all follow rules-based logic. The objective is to make price interaction around those zones easier to inspect, compare, and review across different market conditions.
UNIQUE EDGE
Many order block tools focus mainly on detection. They draw a bullish or bearish block, then leave the interpretation to the user. This script adds an evaluation layer on top of that detection process. Rather than only asking where an order block exists, it also asks how convincingly price reacted when that zone was revisited.
That difference matters. Two zones may look similar at first glance, but the quality of the revisit can be very different. One revisit may reject cleanly and preserve the zone, while another may penetrate deeply, stall, or fully invalidate. By assigning reaction scores and grade-style labels, the script helps organize those differences visually.
The script also distinguishes active order blocks from breaker behavior. If a previously tracked zone is invalidated, the visualization shifts from standard order block context into breaker context. This adds structural continuity to the chart and helps users see when an old reaction area has lost its original character.
In practical use, the unique edge is the combination of three layers: impulsive-origin zone detection, revisit-based reaction scoring, and breaker-state continuity. Together, those layers aim to give traders a cleaner framework for studying order block behavior than a simple box-drawing approach.
METHODOLOGY
1) Impulse detection
The script first searches for strong directional candles whose range is large relative to ATR and whose move exceeds a recent breakout threshold. This is used as a rules-based approximation of displacement or impulsive participation.
2) Order block definition
Once an impulsive move is detected, the script searches backward for the last opposite candle inside a configurable lookback window. That candle becomes the source order block. Depending on settings, the zone can be projected using the full candle range or the candle body only.
3) Zone persistence and revisit tracking
After a zone is created, the script tracks whether price later trades back into it. That first interaction is important because it provides the data needed to evaluate how the revisit behaved.
4) Reaction quality scoring
When price revisits the zone, the script measures the behavior inside a reaction window. The score is based on factors such as entry precision into the zone, the magnitude of rejection away from the zone, structural integrity of the zone during the test, and the strength of the originating impulse. Those components are combined into a normalized score.
5) Grade translation
The raw score is then translated into a visual grade tier. This is meant to improve chart readability and allow faster comparison between zones that produced stronger versus weaker reactions.
6) Breaker conversion
If price invalidates a zone after it has been engaged, the script can treat that structure as a breaker block. This keeps prior structural context on the chart instead of simply removing it.
7) Visual organization
Bullish zones, bearish zones, and breaker structures are displayed with separate color families so users can distinguish standard order block context from post-invalidation context more quickly.
SIGNALS & ALERTS
The script includes alerts for newly detected bullish and bearish order blocks. These alerts are event-based and are intended to mark when a new candidate zone has been identified according to the script’s internal impulse and source-candle rules.
In addition, the visual state of the chart provides three broad categories of information:
- Active bullish or bearish order blocks that remain structurally valid.
- Breaker blocks that represent previously tracked zones after invalidation.
- Quality-scored reactions that help compare the strength of revisits.
These states should be interpreted as structural context, not as standalone trade instructions. A bullish order block on the chart does not guarantee a long setup, and a bearish order block does not guarantee a short setup. The script is designed to help users study reaction behavior around important zones, not to replace execution rules, risk management, or broader market context.
KEY INPUTS
ATR Length
Controls the volatility baseline used in impulse sizing and reaction calculations.
Impulse Size (x ATR)
Defines how large a move must be, relative to ATR, before it is treated as an impulsive displacement event.
OB Search Bars Back
Controls how far back the script looks for the last opposite candle that becomes the source order block.
Zone Mode
Lets the user choose whether zones are based on the full candle range or the candle body only.
Max Zones Tracked
Limits how many zones remain in memory and on the chart.
Zone Max Age (Bars)
Removes older zones after a defined number of bars so the chart does not grow indefinitely cluttered.
Reaction Window (Bars)
Defines the number of bars used to evaluate how price behaves after a zone is revisited.
Zone Extend (Bars)
Controls how far zones project into the future for chart visualization.
Show 50% Midline
Displays an internal midpoint inside the zone for users who want an additional internal reference.
Show Impulse Markers
Shows or hides impulse-origin markers on the chart.
Label Size
Controls the size of chart labels.
Panel Theme / Panel Font Size / Panel Position
These settings control the visual appearance and placement of the information panel.
LIMITATIONS & TRANSPARENCY
Order block analysis is inherently interpretive, and any script that formalizes it must impose strict rules. That means the script’s logic is intentionally selective. It will not match every discretionary order block definition used by every trader.
The script uses a specific rules-based approximation of impulse, source candle selection, revisit handling, and reaction scoring. As a result, some zones that a discretionary analyst might manually highlight will not appear, while some zones shown by the script may not align with every subjective framework.
Reaction quality is also dependent on the configured reaction window and the selected volatility context. Changing settings can change how aggressive or conservative the script becomes. For that reason, the indicator should be treated as a structured analytical model rather than an objective statement of market truth.
Breaker behavior shown by the script reflects the script’s invalidation logic only. It does not imply that a breaker block will necessarily act as support or resistance in the future. It simply preserves structural history after the original order block state is lost.
This indicator does not use volume profile, order flow, DOM data, or external market microstructure feeds. All calculations are derived from chart data available inside Pine Script.
RISK DISCLOSURE
This script is for chart analysis, research, and educational use. It does not provide financial advice, investment recommendations, or guaranteed outcomes.
No indicator can reliably predict future price movement on its own. Order block reactions may fail, clean-looking zones may break, and high scores do not ensure continuation or reversal. Market context, liquidity conditions, volatility regime, timeframe selection, and execution quality all matter.
Users should test settings carefully, apply independent judgment, and use appropriate risk management. This script should be treated as a decision-support tool for studying price interaction around displacement-origin zones, not as a standalone trading system.
Indicator
AG Pro Fair Value Gap Engine [AGPro Series]AG Pro Fair Value Gap Engine
OVERVIEW / WHAT IT DOES
AG Pro Fair Value Gap Engine is a rules-based overlay built to detect 3-bar fair value gap structures and organize them as a living imbalance map on the chart.
The script identifies bullish fair value gaps when the current low is above the high from two bars earlier, and bearish fair value gaps when the current high is below the low from two bars earlier. Once detected, each zone is stored, rendered, tracked through time, and updated as price interacts with it.
Instead of stopping at basic FVG detection, this script continues to follow the structure after creation. It monitors whether the gap remains active, whether price returns into it, whether mitigation occurs, how old the structure has become, and how strong or weak that mitigation event appears relative to the gap itself.
The result is not just a visual list of imbalances. It is an FVG lifecycle model designed to help traders distinguish between fresh gaps, aging gaps, mitigated gaps, and higher-quality mitigation events.
UNIQUE EDGE
Many fair value gap tools simply highlight every detected gap and leave the user to interpret the rest.
This script is built around a different idea:
not all FVGs deserve the same attention, and not every mitigation event carries the same informational value.
AG Pro Fair Value Gap Engine separates itself by combining detection, aging, prioritization, mitigation tracking, and scoring in a single structured workflow. Gaps are not treated as static rectangles. They are treated as evolving chart objects with a lifecycle.
Within the AG Pro Series, this script is also distinct from breakout-quality, reclaim, rotation, pressure, or acceptance-style overlays. Those models focus on trend behavior, reclaim behavior, structural confirmation, momentum pressure, or price acceptance around a reference. This one is centered on imbalance structure itself: where the 3-bar gap formed, how long it stayed relevant, whether price returned, and how credible that mitigation looked once interaction happened.
In practical terms, the script is designed to answer questions such as:
Which FVGs are still active?
Which ones are becoming stale?
Which mitigation events happened with better quality?
Which visible zones are worth keeping in focus, and which are just legacy context?
That is the core difference. This is not a generic FVG highlighter. It is an imbalance-ranking and mitigation-quality engine.
METHODOLOGY
1) Detection Logic
The script scans for standard 3-bar fair value gap structures.
Bullish FVG:
current low > high from two bars back
Bearish FVG:
current high < low from two bars back
A minimum size filter relative to ATR is applied so that very small gaps can be ignored when desired.
2) Structure Tracking
After detection, each FVG is stored and tracked over time. The script keeps the zone on the chart, extends active zones forward when enabled, and updates their visual state as the market evolves.
This allows the chart to preserve the structural memory of imbalance zones instead of treating every new gap as an isolated event.
3) Aging and Visual Decay
Older gaps gradually lose visual priority through fade logic. This helps newer or more relevant structures stay readable while old zones move into the background.
Optional controls can also suppress distant legacy zones when they become both old and far from current price.
4) Mitigation Logic
The script monitors how deeply price returns into each gap. When the user-defined mitigation threshold is reached, the FVG is marked as mitigated.
Mitigated zones can remain visible as context or be hidden for a cleaner chart, depending on preference.
5) Quality Scoring
Mitigation is not treated as a simple yes/no event. The script evaluates mitigation quality using a weighted model that includes:
- Gap size relative to ATR
- Speed of return into the zone
- Relative volume during the mitigation event
- Return strength after contact with the gap
This produces a normalized score intended to help separate weaker fills from stronger, better-formed mitigation behavior.
6) Focus and Prioritization
To reduce chart noise, the script includes focused labeling, active-zone prioritization, top-zone filtering, and legacy suppression logic.
This means the visual output can be tuned away from “show everything” and toward “show what matters most.”
SIGNALS & ALERTS
This script provides alert conditions for:
- Newly detected bullish fair value gaps
- Newly detected bearish fair value gaps
- Bullish fair value gaps reaching mitigation
- Bearish fair value gaps reaching mitigation
These alerts are event-based and rules-based. They are not forecasts, predictions, or trade instructions.
The labels and panel are designed to summarize state, not to replace the user’s broader market process.
KEY INPUTS
Core Settings
- Minimum FVG Size (ATR)
- Mitigation Threshold (%)
- Maximum Tracked FVG Count
- Age Fade Length
- Extend Active FVG Boxes
Scoring Engine
- Speed Score Reference
- Volume Score SMA Length
- Volume Score Max Ratio
- Size Score Max ATR
Visual Settings
- Show FVG Labels
- Focused Label Mode
- Focused Label Minimum Score
- Active / Mitigated Label Age Limits
- Highlight Score Threshold
- Theme Preset
- Show Mitigated Zones
- Show Mitigated Zone Labels
- Label Horizontal Offset
- Hide Distant Legacy FVGs
- Legacy Hide Age
- Legacy Hide Distance
- Show Only Top Active Zones
- Top Active Zones Count
- Label Stack Spacing
Panel Settings
- Show Panel
- Panel Position
- Panel Font Size
These controls allow the same logic to be used in a more information-dense mode or in a much cleaner presentation mode, depending on the charting style of the user.
LIMITATIONS & TRANSPARENCY
This script detects and organizes 3-bar imbalance structures. It does not claim to identify every meaningful liquidity event, order-flow shift, or broader smart money context factor on its own.
A fair value gap can remain open for a long time, fail quickly, or be revisited multiple times. A high score does not guarantee a directional outcome. A low score does not automatically invalidate the zone as context.
The mitigation score is a structured ranking model, not an objective truth about future price behavior. It is designed to help compare events inside the framework of this script.
Because chart structure, volatility, timeframe, and instrument behavior vary, users should expect different FVG densities and different score distributions across markets.
This tool is best used as a market-organization layer for imbalance analysis, not as a standalone execution system.
RISK DISCLOSURE
AG Pro Fair Value Gap Engine is an analytical charting tool for educational and informational use.
It does not provide financial advice, does not promise outcomes, and should not be interpreted as a standalone buy or sell system. Fair value gaps, mitigation events, and score readings should be evaluated together with market structure, volatility, timeframe context, liquidity conditions, and the user’s own risk framework.
Trading involves risk. Past chart behavior does not guarantee future results.
Indicator
