Trender [IQ]IQ Trender - TradingIQ
🔹 OVERVIEW
IQ Trender is a non-repainting trend rail built around one simple visual language:
Flat = range. Ramp = trend. Brightness = conviction.
Most trend tools try to follow every movement in price. In sideways conditions, that can leave you reading a line that bends, twitches, and changes direction inside the same noise you were trying to filter.
IQ Trender is designed to behave differently. While the market remains inside its adaptive hold zone, the rail stays deliberately flat. When the underlying trend evidence becomes strong enough, it commits to a rising or falling leg and moves in one direction until that condition genuinely changes.
The result is a clean distinction between three market states:
Holding - the rail is flat and the market is being treated as a range or consolidation.
Rising - the rail has committed to an upward leg.
Falling - the rail has committed to a downward leg.
Direction is shown by color. Conviction is shown by color intensity and glow. The Trender Radar explains the current state numerically, while the Ghost Forecast extends the rail's present trajectory into a fading uncertainty cone.
This is a trend-reading and visualization tool, not a signal service. It does not issue buy or sell calls, and it makes no claim of profitability or predictive certainty.
🔹 THE ONE-LINE MENTAL MODEL
The fastest way to read IQ Trender is to ignore the mathematics at first and watch the shape of the rail:
A flat rail means the model is holding through noise.
An upward ramp means the model has committed to a rising leg.
A downward ramp means the model has committed to a falling leg.
A stronger glow means the estimated trend is showing greater statistical conviction.
This is the same sequence demonstrated in the walkthrough: a directional leg can flatten during a pause, pullback, or consolidation, then recommit if the broader move resumes. The bearish interpretation is the mirror image - falling leg, flat hold, then a renewed falling leg if downside evidence returns.
The flat section is important. It is not a prediction that a breakout is about to happen. It is the indicator saying that current movement has not earned a directional commitment.
🔸 HOW THE ENGINE WORKS
IQ Trender combines three separate jobs: estimating the trend beneath price, deciding whether that trend is statistically meaningful, and drawing a rail that cannot wiggle backward within a committed leg.
Track the underlying trend
A robust local-linear Kalman filter estimates the level and slope beneath the candles. Unlike a conventional moving average that applies a fixed weighting pattern, this is a state-estimation model: it updates its estimate from the difference between expected and observed price.
Large isolated deviations are reduced with a robust update, so a single wick cannot directly yank the rail to a new location. The model also adapts its measurement-noise estimate as conditions change.
⬞
Measure the uncertainty
The filter calculates an innovation deviation - a live estimate of how much movement is normal relative to its current model. IQ Trender uses that value to size the hold band.
When conditions are noisy, the tolerance can widen. When conditions are calmer, it can tighten. This lets the same mental model adapt across different symbols, price levels, and timeframes without using one fixed distance everywhere.
⬞
Test for commitment and change
The estimated slope is compared with its own uncertainty to produce conviction. Hysteresis uses separate thresholds for entering and leaving a committed trend, helping prevent repeated state changes near one boundary.
A two-sided cumulative change test also monitors standardized price surprises. That evidence helps the rail distinguish a genuine opposing change from ordinary counter-movement when a leg is already active.
⬞
Draw the rail
The visible rail is a separate, slew-limited ratchet guided by the Kalman center. Once an upward leg begins, the rail can only move upward until a valid reversal or hold condition is reached. Once a downward leg begins, it can only move downward.
That monotone-within-leg behavior is what creates IQ Trender's signature geometry: flat holds connected by clean directional ramps instead of a line that bends around every candle.
🔹 THE ADAPTIVE HOLD BAND
The shaded band is the rail's live range corridor.
While the rail is holding, the band opens around it to show the volatility-adjusted area in which price can move without forcing a directional leg. When the rail commits to a trend, the displayed band eases shut onto the rail because the model has left its holding state. When the rail becomes flat again, the band gradually reopens.
The band should be read as a model tolerance, not as conventional support and resistance. Price moving within it means the model can continue to hold. Movement beyond it contributes evidence for a new leg, but it is not, by itself, a guaranteed breakout or trade entry.
🔸 COLOR, GLOW & CONVICTION
IQ Trender communicates direction and commitment through one coordinated visual system:
Rising color - active upward leg.
Falling color - active downward leg.
Holding color - neutral, flat state.
Glow intensity - visual emphasis derived from the current conviction reading.
Conviction measures how strongly the estimated slope differs from zero relative to the model's uncertainty. It is a statistical strength reading, not the probability that a trade will win.
The palette is generated in the Oklab perceptual color space. Hue, lightness, and vibrancy can be adjusted as a coordinated system, while out-of-gamut colors are compressed toward neutral instead of clipping harshly.
Accessibility controls include deuteranopia, protanopia, and tritanopia modes, plus automatic contrast correction against the chart background. A selectable contrast target helps keep the rail and directional Radar accents legible across light and dark themes.
🔹 TRENDER RADAR
The Trender Radar is the live scorecard in the corner of the chart. It reports:
State - HOLDING, RISING, or FALLING.
Conviction - normalized trend commitment from 0-100%.
Slope - the rail's current rate of change per bar.
Hold Band - the current full width of the adaptive range corridor.
Behavior - the active Speed and Pursuit combination.
With Log Geometry enabled, slope is displayed as a percentage per bar and band width is expressed as a percentage of the rail. With linear geometry, both are shown in price units.
The Radar can be moved to any chart corner or disabled entirely.
🔸 GHOST FORECAST
The Ghost Forecast is a translucent forward projection of the rail's current slope.
Its centerline extends the rail's recent trajectory. The surrounding cone widens with distance to communicate increasing uncertainty, then fades away toward the horizon. Two growth modes are available:
√h - tighter near the live bar, then gradually widening like a random-walk spread.
Linear - uncertainty expands at a constant rate.
The forecast is rebuilt only at the live edge and never painted into historical bars. It can also be displayed while the rail is holding, where its centerline remains flat.
This feature is a trajectory read, not a price target. It answers, Where is the rail currently heading if its present slope persists? It does not answer, Where will price trade?
🔹 FLIP MARKERS & ALERTS
Optional markers identify confirmed changes in rail state:
▲ - committed to a rising leg.
▼ - committed to a falling leg.
◇ - flattened back into a hold, when hold markers are enabled.
Markers are created only on confirmed bars. Once printed, they do not move.
Matching alert conditions are included for:
Trender committed to a rising trend.
Trender committed to a falling trend.
Trender flattened into a hold.
These alerts report state changes in the model. They are not automated trade recommendations and should be interpreted in the context of the symbol, timeframe, market structure, and the user's own risk process.
🔸 SPEED - THE OVERALL TEMPO
Speed changes the rail's pursuit rate and the width of its hold zone together:
Glacier - calm, structural behavior for slower or higher-timeframe reading.
Slow - patient swing behavior with a wider hold zone.
Balanced - the recommended reference setting, balancing hold and tracking.
Fast - more reactive behavior for shorter intraday movement.
Scalp - the tightest and quickest micro follower.
Slower settings generally require more displacement and move the rail more gradually. Faster settings use a tighter band and pursue price more aggressively. A faster preset is not automatically better: responsiveness and noise rejection are opposing trade-offs.
🔸 PURSUIT - HOW A COMMITTED LEG MOVES
Pursuit changes the shape of an active leg without changing the underlying trend evidence:
Steady - a constant-speed ramp established when the leg begins.
Eased - pursuit speed scales with conviction and feathers toward the estimated center.
Snap - the most decisive pursuit, with a higher movement rate and faster conviction scaling.
On slower Speed presets, Snap can appear more step-like. Steady produces the cleanest constant ramps, while Eased creates a softer approach.
🔹 HOW TO READ IQ TRENDER
Start with state
Flat rail means the model is holding. Rising or falling rail means it has committed directionally. This gives the chart an immediate range-versus-trend read before any number is considered.
⬞
Weigh the leg
Use conviction, glow, and slope together. A bright rail with firm slope represents stronger model commitment. Fading conviction says the trend estimate is becoming less distinct from noise; it does not guarantee an immediate reversal.
⬞
Watch the sequence
One useful continuation framework is:
Rising rail.
Flat hold during consolidation or pullback.
New rising marker and renewed upward rail.
The bearish sequence is the inverse. This is a way to organize market context, not a complete entry system.
⬞
Keep the forecast in its proper role
Use the Ghost Forecast to visualize current trajectory and uncertainty. Do not treat the cone edge or centerline as a promised future level.
⬞
Confirm with your own process
IQ Trender can be combined with price structure, volume, liquidity, momentum, or a trader's existing risk framework. No single state, marker, or Radar value should replace position sizing and independent confirmation.
🔸 INPUTS
Behavior
Speed
Pursuit
Source & Geometry
Price Source
Use Log Geometry
Close with Log Geometry enabled is the recommended general-purpose setup for ordinary positive price series. Log mode keeps slope and band behavior proportional across different price levels.
Rail, Band & Glow
Hold Band on/off
Band transparency
Rail Glow on/off
Glow intensity
Glow spread
Rail line width
Colors
Rising, Falling, and Holding anchors
Global hue rotation
Lightness adjustment
Vibrancy adjustment
Conviction Color response
Accessibility
Color-Blind Mode
Auto Contrast
Contrast Ratio
State Readout
Show Trender Radar
Radar location
Forecast
Ghost Forecast on/off
Horizon in bars
√h or Linear cone growth
Show While Holding
Markers
Flip Markers on/off
Optional hold markers
Marker size
🔹 NON-REPAINTING BEHAVIOR
IQ Trender is calculated causally with no future-bar lookahead.
Confirmed historical rail values and confirmed flip markers remain where they were calculated. The current, still-open bar can update as new price arrives, as any live indicator can. The Ghost Forecast is intentionally rebuilt at the live edge because it represents the rail's current slope and uncertainty; it does not rewrite historical bars.
What was confirmed in history stays confirmed. What is still live remains live.
🔸 LIMITATIONS & HONEST NOTES
IQ Trender is an indicator, not a validated trading strategy. It makes no performance, win-rate, profit, or edge claim.
Kalman filtering is still a causal estimation process. It reduces noise but cannot remove lag, uncertainty, or false transitions.
Faster settings react sooner but can respond to more noise. Slower settings filter more movement but can confirm later.
A Holding state identifies insufficient directional commitment in this model; it does not guarantee that price will remain inside a range or that a breakout is imminent.
Conviction measures the strength of the estimated slope relative to uncertainty. It is not a probability of future direction or trade success.
The Ghost Forecast extrapolates the rail, not price. It is a visual scenario if the current trajectory persists, not a target or prediction.
Alerts and markers identify model state transitions only. They should not be treated as standalone entries or exits.
Results depend on symbol behavior, timeframe, data quality, and the selected Speed/Pursuit combination.
IQ Trender is built to make one difficult market question easier to see:
Is the market still ranging, or has a trend actually committed?
One rail. Three states. No hindsight redraws.
Indicator
Pivot Matrix + Zones [AFD]Overview
Pivot Matrix + Zones brings up to three independently configured pivot systems into one coordinated overlay. It combines exact pivot ladders, standard Central Pivot Range (CPR), ATR- or tick-scaled reaction zones, formula-aware cross-pack confluence, retained untested levels, a compact context dashboard, and seven bar-close alert conditions.
Each pack can use a different formula and anchor, allowing combinations such as Daily Traditional, Daily Camarilla, and Weekly Fibonacci to be compared without merging their identities.
The script is designed for descriptive market context. It does not produce trade recommendations, forecasts, performance statistics, or automated orders.
What makes it different
The script's original contribution is its identity-aware coordination of the three packs rather than a simple stack of pivot lines. Each pack has its own formula, anchor, tier ceiling, formula-pivot and CPR visibility, labels, R/S color, and line style. One shared lifecycle model freezes reaction width at origin, carries formula and anchor provenance into retained levels and alerts, and keeps dashboard and drawing state aligned.
Confluence requires overlapping reaction zones from at least two distinct enabled packs. Multiple levels or historical origins from only one pack do not create confluence, and duplicate canonical levels do not inflate the displayed pack count. Exact formula-and-anchor duplicates are marked inactive instead of drawing the same configuration twice.
The implementation and lifecycle logic are original. The named pivot methods use standard published calculations identified below; no third-party indicator source code is reused.
Pivot formulas and anchors
The three packs can use Traditional, Floor Pivots, Fibonacci, Woodie, Classic, DM, Camarilla, Frank Dilernia, Shadow Trader, or ACD Method calculations. Traditional, Fibonacci, Woodie, Classic, DM, and Camarilla use the formulas documented for PulseWire Pivot Points Standard. Floor Pivots uses the standard prior-period high, low, and close ladder through R3/S3; those levels match Traditional through the third tier, while Traditional retains its additional R4/R5 extensions.
Available anchors are Auto, Daily, Weekly, Monthly, Quarterly, and Yearly. Auto uses Daily pivots on chart resolutions through 15 minutes, Weekly pivots above 15 minutes and below one day, and Monthly pivots on daily-or-higher charts.
Each formula stops at its documented native tier. The Through Rn/Sn controls do not create unsupported extension levels. Camarilla calculations use the standard R/S equations and display H/L aliases alongside those names.
Data and session handling
Use daily-based values to request anchor data from the selected symbol context. Exchange default, RTH, and ETH choices are available. For futures, ETH uses the exchange-default electronic context, while RTH uses the named subsession entered in the settings. The default futures RTH name is us_regular, but valid names are symbol-specific.
On intraday charts, turning daily-based values off builds anchor values from the chart feed. This may reflect a visible session more closely, but Quarterly or Yearly anchors can have insufficient intraday history. On daily-or-higher charts, the script continues to use daily-based anchor data.
Most formulas use completed prior-anchor values. Woodie also uses the fixed open of the active anchor. The optional developing next CPR uses the active anchor's changing high, low, and close; it is visually separated and never enters confluence, retained history, or alerts.
CPR and reaction zones
CPR always uses the standard floor-pivot calculation from the completed period's high, low, and close. Its chart labels identify the center as PP, the lower Bottom Central boundary as Lower (BC), and the upper Top Central boundary as Upper (TC). This CPR pivot remains separate from a formula pivot when methods such as Woodie or DM produce a different value.
Reaction zones are symmetric bands around exact pivot prices. Their half-width can use confirmed Daily ATR, completed anchor ATR, or a fixed number of minimum ticks. The width is frozen when an anchor's geometry is created, so an existing zone does not drift as ATR changes inside that anchor. The exact pivot remains the center line; the surrounding fill is a configurable context band.
How to read the chart
Exact center lines are the calculated PP, resistance, support, or CPR levels. Soft surrounding fills show the configured interaction distance; they are not additional pivot levels or predictive outputs.
By default, formula PP lines and matching fills are yellow, Pack A R/S lines and fills are blue, and CPR boundaries and the central range are purple. Active labels identify Formula + Level, while CPR labels distinguish PP, Lower (BC), and Upper (TC). Price text is optional and hidden by default.
Confluence and retained levels
When eligible reaction zones from at least two distinct packs overlap, the script merges the overlap transitively into a confluence band. Each label names the unique contributing formulas and then shows the number of distinct packs represented, such as Traditional + Fibonacci x2. Enable confluence is the master control and is on by default. Turning it off removes confluence zones and labels and suppresses Confluence Touch events while the pivot packs, dashboard, retained-level lifecycle, and other alerts continue. When enabled, confluence color, text color, and projection change the display only, not the overlap or alert identity.
At an anchor rollover, eligible pivot zones that were not touched during their active period can be retained as Untested. A later confirmed wick overlap changes the record to TESTED, freezes and fades its drawing for 20 chart bars, and removes it afterward. Retained drawings are off by default, but lifecycle tracking, dashboard counts, confluence eligibility, and fill alerts continue while the drawings are hidden.
Dashboard
The compact dashboard shows only enabled packs with their selected pivot formula and any non-active status. It then classifies the two-period CPR relationship, reports whether the active-anchor open is above, below, or inside CPR, and shows the nearest retained untested level with the live count across all packs. CPR context follows the first enabled pack in A/B/C order.
Display controls
Active geometry can end at a finite current-bar offset, at the anchor end, or extend right. Confluence has its own finite current-bar, finite label-offset, and extend-right choices. Show confluence only hides non-confluence drawings while confluence is enabled; turning the master control off restores the normal layers. Calculations, the dashboard, lifecycle processing, and all enabled alerts continue.
Formula PP, CPR, labels, displayed prices, label size, line width, reaction shading, tier depth, and retained-level styling can be adjusted independently. Formula PP lines and fills default to yellow, Pack A R/S lines and fills default to blue, and CPR boundaries and the central range default to purple. The Inputs tab follows a numbered workflow and dims controls that do not apply without disabling calculations that still use their state. Prices are hidden by default, and chart labels identify formula and level without A/B/C prefixes; dashboard and alert provenance retain pack identity. Duplicate formula-and-anchor pack configurations are rejected rather than drawn twice.
Suggested setup workflow
Configure Pack A as the primary context, then enable Pack B or C when a second formula, anchor, or both are needed for comparison. Choose the highest native R/S tier, session basis, reaction-width method, and projection for the chart being reviewed. Use the dashboard and labels for identity, Show confluence only to isolate cross-pack overlaps, and retained-level drawings when the untested lifecycle should remain visible.
Create alerts only after the symbol, timeframe, sessions, pack settings, and reaction-width inputs are finalized, because those chart settings define the levels and events being monitored.
Alerts
Seven fixed conditions are available: Active Level Touch, Cross Up, Cross Down, CPR Enter, CPR Exit, Untested Level Filled, and Confluence Touch. Events confirm at chart-bar close. Optional dynamic messages aggregate supported events from the same confirmed bar and include available pack, formula, anchor, level, origin, and price context. PulseWire running alerts retain the script inputs saved when they were created, so delete and recreate an alert after changing Enable confluence or another input.
Limitations
Pivot values and rollover timing depend on the selected symbol, data feed, anchor, session context, and available history. Daily and intraday feeds can differ because of extended hours, futures settlements, and feed construction. An invalid futures subsession name can fall back to the exchange default, so confirm the requested name in Inputs and compare the resulting pivots with the intended session.
Reaction zones and confluence visualize proximity; they do not predict a response. Untested means the configured zone was not touched during its tracked active period; it does not imply that price must revisit or react to it.
Use a standard time-based chart when evaluating touches, crosses, and alerts because those events use the chart's OHLC bars. Alerts still depend on PulseWire alert creation, chart settings, feed updates, and bar-close processing.
The script keeps bounded histories of up to 30 live untested levels and 20 fading tested markers, with older retained records removed as those limits are reached. Confluence display is capped at 20 zones.
This is a public open-source Pine Script v6 indicator with a Mozilla Public License 2.0 source header. PulseWire's open-source reuse rules apply on-platform before the license terms. It is an educational charting tool and is not financial advice. Indicator
Auto Support & Resistance Levels v6Basically looking for my own levels for intraday trading and levels for potential options targets, but is just a general plotting script. NFA for learning purposes only
1. Higher Timeframes (Daily, 4-Hour, 1-Hour) — Most Reliable
Best For: Swing trading, position trading, and identifying major market structure.
Why: High-timeframe pivots represent significant institutional buying/selling zones. These support and resistance levels are respected far more often and produce stronger price reactions.
Recommendation: Use settings like leftBars = 15 and rightBars = 15 or 20/20 to capture key macro levels.
2. Lower Timeframes (15-Min, 5-Min, 1-Min) — Noise & Frequent Signals
Best For: Day trading and scalping intraday moves.
Why: On lower timeframes, price action creates a lot of minor highs and lows ("market noise"). The script will generate many more lines, and these levels break much more easily.
Recommendation:
Increase leftBars and rightBars (e.g., 20 to 30) to filter out minor fluctuations.
Combine lower-timeframe entry signals with higher-timeframe support/resistance levels for better accuracy.
💡 Best Practice Strategy (Multi-Timeframe Analysis)
A common approach among traders is:
Identify Major Levels: Apply the script on the Daily or 4H chart to see the major support/resistance walls.
Mark/Execute Entries: Drop down to the 15M or 5M chart to look for trade entries as price approaches those higher-timeframe levels
Indicator
Indicator
Percentage-Level(+%/-%)[LionTrader_]Percentage-Level (+%/-%) by LionTrader_
is a highly efficient and clean technical indicator designed to automatically plot dynamic price levels based on custom percentage offsets. It provides traders with a direct visual representation of percentage-based expansions, making it easier than ever to see exactly when price action reaches or breaks through key structural thresholds.
A major advantage of this tool is its multi-tiered structure, allowing you to track up to three independent levels simultaneously . This flexibility is perfect for identifying multiple price targets, managing scaling strategies, or monitoring different layers of support and resistance.
The indicator features separate long and short controls, giving you the freedom to customize the exact percentage distance, the base price source, and the validation criteria for both the upside and the downside independently.
To keep your charts clean and readable, it utilizes smart visual feedback. The plotted levels remain thin and semi-transparent in the background during normal price action, but they instantly turn thick and brightly colored once your chosen invalidation source, such as the candle high or low, breaches the level.
Additionally, the script ensures excellent chart organization by using clean step-lines and optional cross markers that highlight the exact execution points where a level was triggered. This makes it an incredibly reliable, no-nonsense tool for anyone who bases their trading decisions on fixed percentage movements or requires clear, automated invalidation levels on their charts.
I hope you like it
your LionTrader_🦁 Indicator
Noctis Parallel Geometry [JOAT]Noctis Parallel Geometry
Introduction
Noctis Parallel Geometry is an open-source channel-construction and ratio-lattice overlay designed to organize price into ascending or descending parallel structures built from confirmed pivots. It maps primary boundaries, internal levels, stretch lines, and dynamic tracking projections so the user can see where price is moving inside a broader geometric framework.
The problem this script solves is inconsistent channel drawing. Manually drawn channels vary from user to user, and many automatic channel tools do not show how the geometry was constructed or how price is behaving inside it after the channel is established. Noctis Parallel Geometry turns confirmed pivot relationships into a persistent structure with historical roll-forward behavior.
Core Concepts
1. Pivot-Driven Channel Construction
Ascending geometry is built from two confirmed pivot lows plus the opposing pivot high that defines channel height. Descending geometry is built from two confirmed pivot highs plus the opposing pivot low. This creates a parallel structure rather than a freehand trendline.
2. Ratio Lattice
Once the main channel is built, the script can add internal reference levels and stretch levels. These help the user see whether price is rotating around the midline, respecting inner rails, or pushing into extended geometry.
3. Historical Channel Preservation
When a new active geometry forms, the previous one can be rolled into history instead of being deleted. Historical channels are shifted and preserved so the user can study how prior geometry resolved.
4. Dynamic Projection Tracking
The script can project a live tracking geometry from the most recent active pivot anchor and evolving extreme. This provides a developing path while the full next confirmed channel is still incomplete.
Features
Ascending and descending channel construction: Built from confirmed pivot relationships
Primary channel rails: Base and top boundaries
Inner ratio levels: Optional internal guidance lines
Stretch levels: Optional extension rails beyond the main channel
Historical geometry retention: Previous channels can remain on-chart
Dynamic tracking projection: Live provisional geometry based on current extremes
Pivot tags: Optional pivot markers for transparency
Dashboard: Displays active geometry mode and structural information
Input Parameters
Channel Engine:
Pivot Length
Extend Active Geometry
Show Historical Geometry
Historical Channel Count
Show Dynamic Projection
Ratio Lattice And Display:
Inner-level toggle
Stretch-level toggle
Historical projection offset
Pivot-tag and dashboard toggles
How to Use This Indicator
Step 1: Identify whether the active geometry is ascending or descending.
Step 2: Use the midline and inner rails to gauge whether price is rotating cleanly or losing internal balance.
Step 3: Use stretch levels as warning areas where price is pushing beyond normal channel behavior.
Step 4: Compare active geometry with preserved historical geometry to see whether the market is reusing or abandoning prior pathing.
Step 5: Treat dynamic tracking as provisional context until a fully confirmed new channel is formed.
Indicator Limitations
Channels only update after pivot confirmation, so geometry changes are intentionally delayed to avoid repainting
Fast regime changes can invalidate a channel before price spends much time respecting it
Dynamic tracking lines are exploratory guidance, not confirmed structure
This indicator describes geometry; it does not by itself determine direction or trade quality
Originality Statement
Noctis Parallel Geometry is original in how it turns confirmed pivot relationships into a parallel-channel engine with internal lattice levels, stretch rails, historical roll-forward geometry, and live tracking projection. These parts work together to create a coherent geometric framework rather than a simple trendline overlay.
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice. Channel geometry can fail abruptly in volatile or event-driven conditions, so all analysis should be paired with appropriate risk controls.
-Made with passion by jackofalltrades
Indicator
Indicator
STRONG S/R Lines/Zones MTF Only[EXPERIMENTAL] by Chaitu50cSTRONG S/R Lines / Zones (MTF Only) — EXPERIMENTAL by Chaitu50c
Overview
This indicator is a higher-timeframe based Support and Resistance detection system designed to project strong structural levels onto lower-timeframe charts without repainting. All calculations are performed exclusively on a selected higher timeframe (30-minute, 45-minute, or 1-hour), while the plotted levels adapt smoothly to the active chart timeframe. The main objective is to highlight price areas where strong institutional buying or selling pressure has already been confirmed on the higher timeframe.
Higher Timeframe Logic
The indicator operates strictly on confirmed higher-timeframe candles. It tracks completed higher-timeframe bars and evaluates their open, high, low, and close values only after the candle is fully closed. This ensures that every detected support or resistance level is final and will not shift or repaint during live market conditions.
Resistance Detection
Resistance levels are identified when bearish price action appears after bullish structure on the higher timeframe. The logic looks for either a two-candle or three-candle sequence where selling pressure becomes dominant and price closes below important prior lows. Once such a sequence is confirmed, the resistance area is constructed using a combination of wick highs and candle body highs from the triggering higher-timeframe candles. This defines a realistic supply zone rather than a thin, arbitrary line.
Support Detection
Support levels are detected using the opposite logic. When bullish price action emerges after bearish structure and the higher-timeframe candle closes above key prior highs, the indicator interprets this as strong buying acceptance. The support area is formed using wick lows and candle body lows from the relevant higher-timeframe candles, capturing the price region where demand clearly outweighed supply.
Strength and Overlap Handling
When newly detected support or resistance levels overlap with existing ones, the indicator does not create additional zones. Instead, it strengthens the existing level internally. Each overlap increases the strength count of that level, which is visually represented through increased line thickness or adjusted opacity. This allows strong, repeatedly respected levels to stand out naturally while keeping the chart uncluttered.
Line Mode vs Zone Mode
Users can choose whether levels are plotted as single horizontal lines or as full price zones. Line mode provides precise levels suitable for scalping and exact reaction entries. Zone mode displays the complete price range where rejection or acceptance occurred, which is useful for managing volatility and broader structure analysis. Both modes use identical detection logic; only the visual representation changes.
Zone and Line Extension Control
The “Number of Past Zones to Extend” option controls how many previously detected support and resistance levels remain visible and extended into the future. A value of zero extends only the most recent support and resistance, keeping the chart minimal. Higher values preserve additional historical higher-timeframe levels that may still influence current price action.
Visual Customization
Line appearance can be customized using user-defined colors, styles, and base widths. These settings define how new levels initially appear on the chart. As levels gain strength through repeated confirmations, the indicator automatically adjusts visual properties to reflect their growing importance, without requiring manual changes.
Non-Repainting Behavior
All higher-timeframe data is requested with lookahead disabled. This guarantees that every level is drawn only after the higher-timeframe candle has fully closed. Once a support or resistance level appears, it remains fixed and reliable for live trading, backtesting, and replay analysis.
Practical Usage
This indicator is intended to be used as a structural reference rather than a standalone buy or sell signal. It is most effective when combined with price action confirmation, volume analysis, or lower-timeframe entry techniques. The tool excels at identifying high-probability reaction zones, pullback areas, and major breakout levels derived from higher-timeframe structure.
Final Notes
This indicator is marked as experimental and is designed for traders who understand higher-timeframe structure and contextual analysis. When used correctly, it provides a clean, non-repainting view of strong support and resistance levels that align lower-timeframe decisions with higher-timeframe intent. Indicator
Indicator
Indicator
Indicator
QUARTERS THEORY XAUUSDThe “Quarter Theory XAUUSD” indicator on PulseWire is designed to automatically plot horizontal price levels in $25 increments on your chart, providing traders with a clear visual representation of key psychological and technical price points. These levels are particularly useful for instruments like XAU/USD, where price often reacts to round numbers, forming support and resistance zones that can be leveraged for both scalping and swing trading strategies. By showing all $25 increments as horizontal white lines, the indicator ensures that traders can quickly identify potential entry and exit points, without the need for manual drawing or repeated calculations.
The indicator works by calculating the nearest $25 multiple relative to the current market price and then drawing horizontal lines across the chart for all increments within a defined range. This range can be customized to suit the instrument being traded; for example, for gold (XAU/USD), a typical range might extend from 0 to 5000, covering all practical price levels that could be relevant in both high and low market conditions. By using Pine Script’s persistent variables, the indicator efficiently creates these lines only once at the start of the chart, avoiding unnecessary resource usage and preventing PulseWire from slowing down, which can happen if lines are redrawn every bar.
From a trading perspective, these levels serve multiple purposes. For scalpers, the $25 increments act as micro support and resistance points, helping to determine short-term price reactions and potential breakout zones. Scalpers can use these levels to enter positions with tight stop-loss orders just beyond a level and take profits near the next $25 increment, which aligns with common price behavior patterns in highly liquid instruments. For swing traders, the same levels provide broader context, allowing them to identify areas where price might pause or reverse over several days. Swing traders can use these levels to align trades with the prevailing trend, particularly when combined with other indicators such as moving averages or trendlines.
Another key advantage of the Quarterly Levels indicator is its simplicity and visual clarity. By plotting lines in a uniform white color and extending them to the right, the chart remains clean and easy to read, allowing traders to focus on price action and market dynamics rather than cluttered technical drawings. This visual consistency also helps in backtesting and strategy development, as traders can quickly see how price interacts with each level over time. Additionally, the use of round-number increments leverages the psychological tendencies of market participants, as many traders place stop orders or entry points near these levels, making them natural zones of interest.
Overall, the Quarterly Levels indicator combines efficiency, clarity, and practical trading utility into a single tool. It streamlines chart analysis, highlights meaningful price zones, and supports both scalping and swing trading approaches, making it an essential addition to a trader’s toolkit. By understanding how to integrate these levels into trading strategies, traders can make more informed decisions, manage risk effectively, and identify high-probability trade setups across various market conditions. Indicator
Indicator
Indicator
HMA 34 Dual-Fractal Projections - VdubusVdubus MacD Divergence Trend Break Signal Generator :Here:-
HMA 18 Dual-Fractal Projections
Overview
The HMA 18 Dual-Fractal Projections is a technical analysis tool designed to identify market structure and potential breakout patterns by analyzing the pivots of a Hull Moving Average (HMA).
Unlike standard trendline indicators that struggle to balance "big picture" trends with immediate price action, this indicator utilizes a Dual-Fractal approach. It simultaneously calculates two separate timelines—Macro and Micro—to visualize both the dominant channel and the developing chart patterns (such as wedges or triangles) in real-time.
Visual Guide
The indicator plots three key elements on the main chart:
The HMA Line (Blue): A smooth, fast-acting moving average (default length 34) that serves as the baseline for all calculations.
Macro Structure (Solid, Thick Lines):
Red (Solid): Major Resistance.
Green (Solid): Major Support.
Purpose: Identifies the long-term trend channel. These lines react slowly and filter out noise.
Micro Structure (Dashed, Thin Lines):
Red (Dashed): Immediate Resistance.
Green (Dashed): Immediate Support.
Purpose: Identifies the short-term market structure. These lines react quickly to show forming wedges, triangles, or flags.
How It Works
The indicator applies a "Pivot High/Low" algorithm directly to the HMA data rather than raw price data. This filters out candle wicks and volatility, ensuring lines are drawn based on established momentum shifts.
Layer 1 (Macro): Uses a large "Lookback" period (default 44 bars) to find significant peaks and valleys. It connects the most recent major pivot to the previous one, projecting a line forward to show where the major trend channel lies.
Layer 2 (Micro): Uses a small "Lookback" period (default 10 bars) to find local peaks and valleys. This allows you to see how price is behaving within the larger channel.
Settings & Configuration
HMA Settings
HMA Length: The length of the Hull Moving Average.
Default: 34 (Matches the "visually pleasing" setting from recent testing).
Note: Set to 18 for a faster, more reactive baseline (scalping).
Layer 1: Macro (Big Channel)
Macro Lookback: Determines how many bars must pass before a peak is confirmed.
Default: 44. High values find broad, established channels.
Max Macro Lines: How many historical lines to keep on the chart.
Default: 1 (Keeps the chart clean, showing only the current structure).
Extend Macro Lines: Projects the lines infinitely to the right to predict future support/resistance zones.
Layer 2: Micro (Current Pattern)
Micro Lookback: A lower sensitivity setting to catch immediate structure.
Default: 10. Low values will pinpoint the exact boundaries of small wedges or flags forming right now.
Trading Strategy & Interpretation
1. The "Squeeze" (Wedge Identification) This is the primary use case.
Look for scenarios where the Macro Lines (Solid) are wide/parallel, but the Micro Lines (Dashed) are rapidly converging (pointing towards each other).
This indicates that while the main trend is intact, momentum is compressing. A breakout is imminent where the dashed lines intersect.
2. Trend Channels
When both Solid and Dashed lines are roughly parallel and sloping in the same direction, the trend is healthy and strong. Price is respecting both the short-term and long-term momentum.
3. Divergence / Early Reversal Warning
If the Macro Line is sloping UP, but the Micro Line starts sloping DOWN (crossing inside), it indicates a loss of momentum and a potential reversal before the price actually breaks the major trendline.
===========================================================================
2. Micro/Macro Cross Alert
A new input, Enable Micro/Macro Cross Alert, has been added under the "Alerts & Features" section.
This alert condition is triggered when the momentum of the Micro Structure exceeds the momentum of the Macro Structure, which is a high-probability signal for a breakout:
Bullish Alert: The Micro High (dashed red line) crosses above the Macro High (solid red line).
Bearish Alert: The Micro Low (dashed green line) crosses below the Macro Low (solid green line).
To set up the actual alert on your chart:
Right-click on the chart.
Select "Add alert on HMA 34 Dual-Fractal Projections".
In the Condition dropdown, select the indicator's name.
For the main alert criteria, choose "Any alert()".
Select your preferred alert actions (e.g., notification, email). Indicator
Market Spiralyst [Hapharmonic]Hello, traders and creators! 👋
Market Spiralyst: Let's change the way we look at analysis, shall we? I've got to admit, I scratched my head on this for weeks, Haha :). What you're seeing is an exploration of what's possible when code meets art on financial charts. I wanted to try blending art with trading, to do something new and break away from the same old boring perspectives. The goal was to create a visual experience that's not just analytical, but also relaxing and aesthetically pleasing.
This work is intended as a guide and a design example for all developers, born from the spirit of learning and a deep love for understanding the Pine Script™ language. I hope it inspires you as much as it challenged me!
🧐 Core Concept: How It Works
Spiralyst is built on two distinct but interconnected engines:
The Generative Art Engine: At its core, this indicator uses a wide range of mathematical formulas—from simple polygons to exotic curves like Torus Knots and Spirographs—to draw beautiful, intricate shapes directly onto your chart. This provides a unique and dynamic visual backdrop for your analysis.
The Market Pulse Engine: This is where analysis meets art. The engine takes real-time data from standard technical indicators (RSI and MACD in this version) and translates their states into a simple, powerful "Pulse Score." This score directly influences the appearance of the "Scatter Points" orbiting the main shape, turning the entire artwork into a living, breathing representation of market momentum.
🎨 Unleash Your Creativity! This Is Your Playground
We've included 25 preset shapes for you... but that's just the starting point !
The real magic happens when you start tweaking the settings yourself. A tiny adjustment can make a familiar shape come alive and transform in ways you never expected.
I'm genuinely excited to see what your imagination can conjure up! If you create a shape you're particularly proud of or one that looks completely unique, I would love to see it. Please feel free to share a screenshot in the comments below. I can't wait to see what you discover! :)
Here's the default shape to get you started:
The Dynamic Scatter Points: Reading the Pulse
This is where the magic happens! The small points scattered around the main shape are not just decorative; they are the visual representation of the Market Pulse Score.
The points have two forms:
A small asterisk (`*`): Represents a low or neutral market pulse.
A larger, more prominent circle (`o`): Represents a high, strong market pulse.
Here’s how to read them:
The indicator calculates the Pulse Strength as a percentage (from 0% to 100%) based on the total score from the active indicators (RSI and MACD). This percentage determines the ratio of circles to asterisks.
High Pulse Strength (e.g., 80-100%): Most of the scatter points will transform into large circles (`o`). This indicates that the underlying momentum is strong and It could be an uptrend. It's a visual cue that the market is gaining strength and might be worth paying closer attention to.
Low Pulse Strength (e.g., 0-20%): Most or all of the scatter points will remain as small asterisks (`*`). This suggests weak, neutral, or bearish momentum.
The key takeaway: The more circles you see, the stronger the bullish momentum is according to the active indicators. Watch the artwork "breathe" as the circles appear and disappear with the market's rhythm!
And don't worry about the shape you choose; the scatter points will intelligently adapt and always follow the outer boundary of whatever beautiful form you've selected.
How to Use
Getting started with Spiralyst is simple:
Choose Your Canvas: Start by going into the settings and picking a `Shape` and `Palette` from the "Shape Selection & Palette" group that you find visually appealing. This is your canvas.
Tune Your Engine: Go to the "Market Pulse Engine" settings. Here, you can enable or disable the RSI and MACD scoring engines. Want to see the pulse based only on RSI? Just uncheck the MACD box. You can also fine-tune the parameters for each indicator to match your trading style.
Read the Vibe: Observe the scatter points. Are they mostly small asterisks or are they transforming into large, vibrant circles? Use this visual feedback as a high-level gauge of market momentum.
Check the Dashboard: For a precise breakdown, look at the "Market Pulse Analysis" table on the top-right. It gives you the exact values, scores, and total strength percentage.
Explore & Experiment: Play with the different shapes and color palettes! The core analysis remains the same, but the visual experience can be completely different.
⚙️ Settings & Customization
Spiralyst is designed to be highly customizable.
Shape Selection & Palette: This is your main control panel. Choose from over 25 unique shapes, select a color palette, and adjust the line extension style ( `extend` ) or horizontal position ( `offsetXInput` ).
scatterLabelsInput: This setting controls the total number of points (both asterisks and circles) that orbit the main shape. Think of it as adjusting the density or visual granularity of the market pulse feedback.
The Market Pulse engine will always calculate its strength as a percentage (e.g., 75%). This percentage is then applied to the `scatterLabelsInput` number you've set to determine how many points transform into large circles.
Example: If the Pulse Strength is 75% and you set this to `100` , approximately 75 points will become circles. If you increase it to `200` , approximately 150 points will transform.
A higher number provides a more detailed, high-resolution view of the market pulse, while a lower number offers a cleaner, more minimalist look. Feel free to adjust this to your personal visual preference; the underlying analytical percentage remains the same.
Market Pulse Engine:
`⚙️ RSI Settings` & `⚙️ MACD Settings`: Each indicator has its own group.
Enable Scoring: Use the checkbox at the top of each group to include or exclude that indicator from the Pulse Score calculation. If you only want to use RSI, simply uncheck "Enable MACD Scoring."
Parameters: All standard parameters (Length, Source, Fast/Slow/Signal) are fully adjustable.
Individual Shape Parameters (01-25): Each of the 25+ shapes has its own dedicated group of settings, allowing you to fine-tune every aspect of its geometry, from the number of petals on a flower to the windings of a knot. Feel free to experiment!
For Developers & Pine Script™ Enthusiasts
If you are a developer and wish to add more indicators (e.g., Stochastic, CCI, ADX), you can easily do so by following the modular structure of the code. You would primarily need to:
Add a new `PulseIndicator` object for your new indicator in the `f_getMarketPulse()` function.
Add the logic for its scoring inside the `calculateScore()` method.
The `calculateTotals()` method and the dashboard table are designed to be dynamic and will automatically adapt to include your new indicator!
One of the core design philosophies behind Spiralyst is modularity and scalability . The Market Pulse engine was intentionally built using User-Defined Types (UDTs) and an array-based structure so that adding new indicators is incredibly simple and doesn't require rewriting the main logic.
If you want to add a new indicator to the scoring engine—let's use the Stochastic Oscillator as a detailed example—you only need to modify three small sections of the code. The rest of the script, including the adaptive dashboard, will update automatically.
Here’s your step-by-step guide:
#### Step 1: Add the User Inputs
First, you need to give users control over your new indicator. Find the `USER INTERFACE: INPUTS` section and add a new group for the Stochastic settings, right after the MACD group.
Create a new group name: `string GRP_STOCH = "⚙️ Stochastic Settings"`
Add the inputs: Create a boolean to enable/disable it, and then add the necessary parameters (`%K`, `%D`, `Smooth`). Use the `active` parameter to link them to the enable/disable checkbox.
// Add this code block right after the GRP_MACD and MACD inputs
string GRP_STOCH = "⚙️ Stochastic Settings"
bool stochEnabledInput = input.bool(true, "Enable Stochastic Scoring", group = GRP_STOCH)
int stochKInput = input.int(14, "%K Length", minval=1, group = GRP_STOCH, active = stochEnabledInput)
int stochDInput = input.int(3, "%D Smoothing", minval=1, group = GRP_STOCH, active = stochEnabledInput)
int stochSmoothInput = input.int(3, "Smooth", minval=1, group = GRP_STOCH, active = stochEnabledInput)
#### Step 2: Integrate into the Pulse Engine (The "Factory")
Next, go to the `f_getMarketPulse()` function. This function acts as a "factory" that builds and configures the entire market pulse object. You need to teach it how to build your new Stochastic indicator.
Update the function signature: Add the new `stochEnabledInput` boolean as a parameter.
Calculate the indicator: Add the `ta.stoch()` calculation.
Create a `PulseIndicator` object: Create a new object for the Stochastic, populating it with its name, parameters, calculated value, and whether it's enabled.
Add it to the array: Simply add your new `stochPulse` object to the `array.from()` list.
Here is the complete, updated `f_getMarketPulse()` function :
// Factory function to create and calculate the entire MarketPulse object.
f_getMarketPulse(bool rsiEnabled, bool macdEnabled, bool stochEnabled) =>
// 1. Calculate indicator values
float rsiVal = ta.rsi(rsiSourceInput, rsiLengthInput)
= ta.macd(close, macdFastInput, macdSlowInput, macdSignalInput)
float stochVal = ta.sma(ta.stoch(close, high, low, stochKInput), stochDInput) // We'll use the main line for scoring
// 2. Create individual PulseIndicator objects
PulseIndicator rsiPulse = PulseIndicator.new("RSI", str.tostring(rsiLengthInput), rsiVal, na, 0, rsiEnabled)
PulseIndicator macdPulse = PulseIndicator.new("MACD", str.format("{0},{1},{2}", macdFastInput, macdSlowInput, macdSignalInput), macdVal, signalVal, 0, macdEnabled)
PulseIndicator stochPulse = PulseIndicator.new("Stoch", str.format("{0},{1},{2}", stochKInput, stochDInput, stochSmoothInput), stochVal, na, 0, stochEnabled)
// 3. Calculate score for each
rsiPulse.calculateScore()
macdPulse.calculateScore()
stochPulse.calculateScore()
// 4. Add the new indicator to the array
array indicatorArray = array.from(rsiPulse, macdPulse, stochPulse)
MarketPulse pulse = MarketPulse.new(indicatorArray, 0, 0.0)
// 5. Calculate final totals
pulse.calculateTotals()
pulse
// Finally, update the function call in the main orchestration section:
MarketPulse marketPulse = f_getMarketPulse(rsiEnabledInput, macdEnabledInput, stochEnabledInput)
#### Step 3: Define the Scoring Logic
Now, you need to define how the Stochastic contributes to the score. Go to the `calculateScore()` method and add a new case to the `switch` statement for your indicator.
Here's a sample scoring logic for the Stochastic, which gives a strong bullish score in oversold conditions and a strong bearish score in overbought conditions.
Here is the complete, updated `calculateScore()` method :
// Method to calculate the score for this specific indicator.
method calculateScore(PulseIndicator this) =>
if not this.isEnabled
this.score := 0
else
this.score := switch this.name
"RSI" => this.value > 65 ? 2 : this.value > 50 ? 1 : this.value < 35 ? -2 : this.value < 50 ? -1 : 0
"MACD" => this.value > this.signalValue and this.value > 0 ? 2 : this.value > this.signalValue ? 1 : this.value < this.signalValue and this.value < 0 ? -2 : this.value < this.signalValue ? -1 : 0
"Stoch" => this.value > 80 ? -2 : this.value > 50 ? 1 : this.value < 20 ? 2 : this.value < 50 ? -1 : 0
=> 0
this
#### That's It!
You're done. You do not need to modify the dashboard table or the total score calculation.
Because the `MarketPulse` object holds its indicators in an array , the rest of the script is designed to be adaptive:
The `calculateTotals()` method automatically loops through every indicator in the array to sum the scores and calculate the final percentage.
The dashboard code loops through the `enabledIndicators` array to draw the table. Since your new Stochastic indicator is now part of that array, it will appear automatically when enabled!
---
Remember, this is your playground! I'm genuinely excited to see the unique shapes you discover. If you create something you're proud of, feel free to share it in the comments below.
Happy analyzing, and may your charts be both insightful and beautiful! 💛 Indicator
Vertical Time Marker Configurable (VTMC)# Vertical Time Marker Configurable (VTMC)
## Overview
The Vertical Time Marker Configurable (VTMC) is a powerful PineScript v6 indicator designed to help traders quickly identify key market times across their entire chart history. Instead of hovering over candles to check timestamps, VTMC draws clear vertical lines with customizable labels at your specified times, making it easy to spot important market sessions, news events, or personal trading windows at a glance.
## Key Features
### ⏰ Flexible Time Selection
- Set any time using an intuitive time picker (defaults to 8:30 AM Central Time)
- Automatically draws lines at your specified time across all historical data
- Perfect for marking market opens, closes, news releases, or personal trading times
### 🎨 Full Visual Customization
- **Line Color**: Choose any color (defaults to white for maximum visibility)
- **Line Style**: Solid, dashed, or dotted options
- **Line Width**: Adjustable from 1-10 pixels
- **Opacity Control**: Precise opacity slider (0-100%) for both line and text
### 🏷️ Smart Text Labels
- **Preset Options**: New York Open, New York Close, London Open, London Close, Asia Open, Asia Close
- **Custom Labels**: Enter any text for personalized marking (news events, trading windows, etc.)
- **Configurable Text**: Adjustable size (8-20px), color, and opacity
- **Smart Positioning**: Text appears just above the price action for clear visibility
### 📊 Professional Display
- Lines extend fully from top to bottom of chart
- Clean, non-intrusive design that doesn't clutter your analysis
- Works on any timeframe and market
- Historical lines persist across all chart data
## Perfect For
### Market Session Traders
- Mark key session opens and closes
- Identify overlap periods between major markets
- Track session-specific price behavior patterns
### News Traders
- Mark important economic releases (FOMC, NFP, etc.)
- Create visual reminders for scheduled events
- Track market reaction patterns around news times
### Institutional Flow Traders
- Identify key institutional activity times
- Mark order block formation periods
- Track smart money movement windows
### Personal Trading Systems
- Mark your optimal trading hours
- Create visual discipline for trading windows
- Track performance during specific time periods
## Why VTMC?
Unlike hardcoded session indicators that only work for specific markets, VTMC gives you complete flexibility to mark ANY time that matters to your trading strategy. Whether you're tracking "MY Trading Window" from 9:30-10:30 AM or marking custom news events, VTMC adapts to your specific needs.
The indicator eliminates the constant need to hover over candles to check times, instead providing instant visual reference points across your entire chart. This makes pattern recognition, backtesting, and trade timing significantly more efficient.
## Usage Tips
- Use multiple instances for different time zones or events
- Combine with other indicators for comprehensive market timing
- Customize colors to match your chart theme
- Use custom labels for personalized trading reminders
*Built with precision in PineScript v6 for reliable performance and modern PulseWire compatibility.* Indicator
Indicator
Zig Zag Trend Metrics“ Zig Zag Trend Metrics ” is a highly versatile indicator, built on the classic Zig Zag concept and thoughtfully designed for technical traders seeking a deeper, more structured view of market dynamics. This tool identifies significant swing highs and lows, classifies them, and annotates each with key metrics, offering a precise snapshot of each movement. It enhances visual analysis by drawing connecting lines that outline the flow of market structure, making trend progression and reversals instantly recognizable. Beyond visual mapping, it features a compact, real-time statistics table that calculates the average price and time deltas for both bullish and bearish swings, giving traders deep insights into trend momentum and rhythm. With extensive customization options, this indicator adapts seamlessly to vast trading styles or chart setups, empowering traders to spot patterns, evaluate trend strength, and make more confident, data-backed decisions.
❖ FEATURES
✦ Automatic Swing Detection
At its core, this indicator automatically identifies swing highs and lows based on a customizable lookback period (default: 10 bars).
✦ Labeling Swing Points
Each swing is visualized with a label that includes:
Swing Classification : “HH” (Higher High), “LH” (Lower High), “LL” (Lower Low), or “HL” (Higher Low).
Price Difference : Displayed in percentage or absolute value from the previous opposite swing.
Time Difference : The number of bars since the previous swing of the opposite type.
These labels offer traders clear, immediate insight into price movements and structural changes.
✦ Visual Lines
The indicator draws three types of lines:
Bullish Lines: Connect recent swing lows to new swing highs, indicating uptrends.
Bearish Lines: Connect recent swing highs to new swing lows, indicating downtrends.
Range Lines: Connect consecutive highs or lows to outline price channels.
Each line type can be color-coded and customized for visibility.
✦ Statistics Table
An on-screen metrics table provides a live summary of trends. Script uses Relative Averaging to smooth price and time changes. This prevents outliers from distorting the data and provides a more reliable sense of typical swing behavior.
Uptrend Metrics: Shows average price and time differences from recent bullish swings.
Downtrend Metrics: Shows the same for bearish swings.
🛠️ Customization Options
Ability to tailor the indicator to suit their strategy and aesthetic preferences:
Swing Period: Adjust sensitivity to short- or long-term swings.
Color Settings: Customize line and label colors.
Label Display: Choose between absolute or percentage price differences.
Table Settings: Modify size, location, or visibility.
This makes the indicator highly flexible and useful across various timeframes and assets. Indicator
RSI with Trend LinesThe RSI with Trend Lines indicator is a tool designed to analyze the behavior of the Relative Strength Index (RSI) combined with dynamic trend lines. This indicator not only provides the standard RSI reading but also identifies pivot points on the RSI and draws bullish and bearish trend lines based on these points. It also includes customizable options for adjusting trend lines, displaying the RSI moving average, and highlighting key levels such as overbought, oversold, and the center line.
This indicator is ideal for finding and identifying clear trends in the RSI and taking advantage of market breakout or consolidation signals. It also includes a table with the POC value, which represents the price level at which the most trading activity has occurred, indicating the highest liquidity and highest trading volume.
Key Features:
1. Basic RSI:
• Calculates the RSI using a configurable period length (default 14).
• Colors the RSI based on its direction (green for rising, red for falling) and its position relative to the center line (50).
2. Key Levels:
• Displays overbought (70 and 80), oversold (20 and 30), and the center line (50) levels for easy visual interpretation.
3. RSI Moving Average:
• Enables and configures an RSI moving average (SMA, EMA, WMA, or ALMA) to smooth out fluctuations and detect clearer trends.
4. Dynamic Trend Lines:
• Identifies pivot points on the RSI and draws bullish and bearish trend lines.
• Trend lines can be extended into the future or limited to the visible range.
• Includes options to display broken lines (trends that are no longer valid) and customize the style (solid or dashed).
5. Pivot Points:
• Displays the high and low pivot points on the chart for a better understanding of trend changes.
6. Advanced Customization:
• Adjust the pivot point period.
• Control the number of pivot points to consider for trend lines.
• Customize the line thickness and style.
How to Use the Indicator:
1. RSI Interpretation:
• Overbought Zone (RSI > 70): Indicates that the asset may be overvalued and could correct downward.
• Oversold Zone (RSI < 30): Suggests that the asset may be undervalued and could rebound.
• Centerline Crossover (50): A cross above 50 indicates bullish strength, while a cross below suggests weakness.
2. Trend Lines:
• Bullish Lines: Drawn when the RSI forms ascending low pivot points. These lines represent dynamic support.
• Bearish Lines: These are drawn when the RSI forms descending high pivot points. These lines represent dynamic resistance.
• Broken Lines: When a trend line becomes invalid (the RSI breaks the line), they are displayed in a dotted style to highlight the breakout.
3. Possible Trading Signals:
• Buy: When the RSI breaks an upward downtrend line.
• Sell: When the RSI breaks a downward uptrend line.
• Trend Confirmation: When the RSI stays within a valid trend line, it suggests that the current trend is strong.
4. A chart with the POC value:
• The point of control is a price level at which the highest trading volume occurs in a given time period. It is a key component of the Volume Profile indicator, which displays volume by price.
• Use of the POC in trading:
• The POC is used to identify areas of high interest and liquidity for trading.
• The POC provides information about the equilibrium point where buyers and sellers are most evenly matched.
• Therefore, it can be considered a zone of interest, meaning it can act as support or resistance.
Indicator
Indicator
Dynamic S/R Levels: Edge FinderOverview
The Dynamic S/R Levels: Edge Finder indicator is designed to identify dynamic support and resistance levels based on historical price action. It uses a combination of price extremes (highs and lows) over user-defined lookback periods, weighted moving averages (WMAs), and touch-count analysis to provide actionable insights into key market levels.
This tool is ideal for traders who want to:
Identify dynamic support and resistance zones.
Understand the strength of these levels based on price touches.
Make informed decisions using clear, adaptive levels.
How It Works
Dynamic Levels Calculation:
The indicator calculates dynamic support levels using the lowest lows and dynamic resistance levels using the highest highs over user-defined lookback periods (e.g., 20, 40, 60 bars, etc.).
These levels are updated dynamically as new price data becomes available.
Touch Count Analysis:
The indicator counts how many times the price has touched or come close to each support/resistance level within the lookback period.
Levels with more touches are considered stronger and are highlighted accordingly.
Weighted Moving Averages (WMAs):
The indicator uses 50-period and 100-period WMAs to identify the closest support/resistance levels to the current trend.
Levels near these WMAs are given additional weight, as they are more likely to act as significant barriers.
Level Merging:
If two support or resistance levels are too close to each other (based on the minimum distance percentage), the weaker level (with fewer touches) is removed to avoid clutter.
Visualization:
Support levels are displayed as dashed red lines, and resistance levels are displayed as dashed blue lines.
Each level is labeled with its corresponding touch count, allowing traders to quickly assess its strength.
How to Interpret the Indicator
Strong Support/Resistance Levels:
Levels with higher touch counts (e.g., 5, 10, or more) are considered stronger and are more likely to hold in the future.
Use these levels to plan entries, exits, or stop-loss placements.
Proximity to WMAs:
Levels closest to the 50-period or 100-period WMA are more significant, especially in trending markets.
These levels often act as dynamic barriers where price reactions are more likely.
Breakouts and Rejections:
If the price breaks through a strong resistance level, it may indicate a potential bullish trend.
If the price rejects a strong support level, it may indicate a potential bearish trend.
Always confirm breakouts or rejections with additional analysis (e.g., volume, candlestick patterns).
Level Merging:
Merged levels indicate areas of high confluence, where multiple support/resistance zones overlap.
These areas are particularly important for decision-making, as they represent stronger market reactions.
Key Features
Customizable Lookback Periods: Adjust the lookback periods for each dynamic level to suit your trading style.
Touch Count Labels: Quickly identify the strength of each level based on the number of price touches.
Adaptive Levels: The indicator dynamically updates levels based on recent price action.
Clean Visualization: Levels are automatically merged to avoid clutter and provide a clear view of the market structure.
Usage Tips
Trend Identification: Combine the indicator with trend-following tools (e.g., moving averages, trendlines) to confirm the overall market direction.
Risk Management: Use the identified levels to set stop-loss orders or take-profit targets.
Timeframe Flexibility: The indicator works on all timeframes, but it is particularly effective on higher timeframes (e.g., 1H, 4H, Daily) for more reliable levels.
Example Scenarios
Bounce Trade:
If the price approaches a strong support level (high touch count) and shows signs of rejection (e.g., bullish candlestick patterns), consider a long position with a stop-loss below the support level.
Breakout Trade:
If the price breaks above a strong resistance level with high volume, consider a long position with a target at the next resistance level.
Range-Bound Market:
In a sideways market, use the support and resistance levels to identify range boundaries and trade bounces between them.
Disclaimer
Dynamic S/R Levels: Edge Finder is a technical analysis tool designed to identify dynamic support and resistance levels based on historical price action. It is intended for informational and educational purposes only. This indicator does not provide financial, investment, or trading advice. Users are solely responsible for their trading decisions and should conduct their own research and analysis before making any trades. The developer of this tool is not liable for any financial losses or damages resulting from the use of this indicator. Trading in financial markets involves risk, and you should only trade with capital you can afford to lose. Indicator
Candle % Close with Bullish/Bearish EvaluationI created the indicator to more quickly define the polarity of candles. For a large number of candles, it is straightforward to determine whether a candle is bullish or bearish. However, candles with long wicks often appear, making it uncertain whether the candle is bullish or bearish from a price action perspective. It is not a rule that a red candle is bearish and a green candle is bullish.
From a more advanced price action standpoint, how these candles close is important. Therefore, I created the 'Percent range' input. By default, it is set to 50% (high-low)/2. This way, the indicator precisely determines 50% of the candle's entire range. This allows us to determine whether a bearish candle truly closed below 50% of its range. If not, such a candle is considered bullish, even if it is a negative candle. The same applies to bullish candles, but conversely. If a positive candle closes below 50% of its range, from a price action perspective, it is considered a bearish candle.
Since in price action it is common for the price to return to 50% of the previous candle and, after filling, to continue in the established trend, I added the line extension option. Whatever high value you enter, the line extension follows the current candle. This option works only when the stop line checkbox is enabled. This way, you can plot 50% of the candle's range that the market has historically not returned to due to a strong trend. Often, this line is plotted on a candle where there is also an FVG, which can help you more easily find a point of interest.
Stop line extension : Ensures the interruption of line plotting when the candle is touched by the body or wick.
Indicator
