[3Commas] POL Grid Long Indicator POL Grid — Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow on POL / USDT between two fixed bounds. It tracks up to 36 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 7–200 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on POL in range-bound regimes.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid execution.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a high-trade-count contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging. The table also accumulates the realized PnL from every closed slot (the exact round-trip profit between adjacent levels), so it shows how much the grid has actually earned over the chart history.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid-bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
- Calibrated for POL 15m: Default bounds, level count, and step size are set against POL's recent observed range. The 36-level geometric ladder gives roughly 1.0% per step — wide enough to clear taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Indicator:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep marking as owned as price falls and won't free until price reverses. The default High/Low (0.11847 / 0.08376) was set against POL's recent observed range; update both whenever the regime changes.
Capital Deployment: The default Total Investment of 10,000 USDT is a virtual reference used for the avg-entry and open-PnL computation. The real sizing happens on the bot side — match the indicator's per-slot allocation to your bot's grid configuration to keep the avg-entry display honest.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment configured at the bot. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics over a ~3.9-month sample (800 closed trades, 53.25% win rate, 12.94% max drawdown, profit factor 1.315, +8.83% net return), use the companion strategy version on identical parameters. The 800-trade sample is well above the ~100-trade floor for statistical relevance.
🔷 How to Use It:
🔸 Add the indicator to a POL / USDT 15m chart.
🔸 Set the High and Low bounds to a range you expect POL to respect.
🔸 Pick Geometric (default, recommended) or Arithmetic spacing.
🔸 Set Grid Levels (7–200) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_POL).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 36, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table (shows status, range, levels, owned slots, avg entry, deployed capital, open PnL, and cumulative realized PnL).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
[3Commas] POL Grid Bot - Long Strategy POL Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that harvests volatility on POL / USDT through repeated round-trips on a pre-defined ladder of price levels between two fixed bounds. Each level is an independent slot: when price crosses down through a level, the strategy opens one slot; when price subsequently crosses up through the level immediately above, that slot is closed for a fixed round-trip profit. The grid is generated geometrically by default, so spacing adapts to the price scale.
- Up to 36 simultaneous long slots at default settings, each sized as a fixed fraction of the configured Total Investment.
- No trailing exit, no stop loss — each slot's exit is the level above its entry.
- Per-slot exposure is approximately 2.78% of equity at default settings, comfortably inside the conventional 5–10% per-trade risk band.
- Every fill and close emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on POL in range-bound regimes.
- Bot operators looking for a chart-driven signal source with per-slot webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a high-trade-count contributor with bounded per-trade risk.
- Range traders who prefer mechanical execution over discretionary entries.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots whose entry price is below current market simply wait until price comes back. This is the canonical grid-bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all 36 slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's primary risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All up to 200 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — derived from fill-by-fill bookkeeping, not synthetic averaging. The status table also reports the cumulative realized net profit (how much the grid has actually earned, in USDT and % of starting capital), so live performance is visible directly on the chart.
- Calibrated for POL 15m: Default bounds, level count, and step size are set against POL's recent observed range. The 36-level geometric ladder gives roughly 1.0% per step — wide enough to clear taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Strategy:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep loading as price falls and won't close until price reverses. The default High/Low (0.11847 / 0.08376) was set against POL's recent observed range; update both whenever the regime changes.
Capital Deployment & Drawdown: The default Investment of 10,000 USDT equals 100% of starting capital — high-conviction setting that assumes the configured range holds. Per-slot risk is low (~2.78% of equity), but if price collapses below the Low bound, aggregate unrealized loss can grow further. Scale the Investment input down to match the worst-case drawdown you are willing to absorb in a range-break scenario.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's per-trade risk is structurally capped by the per-slot allocation (Investment / N levels) — at defaults that is ~278 USDT per slot, well inside the conventional 5–10% per-trade band. The aggregate unrealized exposure is controlled separately via the Investment input.
Trade Volume & Fees: Grid bots on 15m generate a high number of round-trips. The ~1.0% step is deliberately wider than a tight scalp grid so each round-trip comfortably clears the taker fee. The default commission (0.06% per trade) should be matched to your exchange's actual fees; any mismatch will materially shift the results.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: POLUSDT — strategy is portable to any POL / USDT pair.
Timeframe: 15M
Test Period: February 6, 2026 — June 4, 2026 (~3.9 months).
Initial Capital: 10,000 USDT.
Total Investment: 10,000 USDT (100% of capital, high-conviction setting).
Order Size per Slot: Investment / 36 ≈ 278 USDT (~2.78% of equity).
Commission: 0.06% per trade.
Slippage: 3 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 0.11847 / Low 0.08376 (range −29.30%).
Grid Levels: 36 (Geometric spacing, ~1.0% per step).
Stop Loss: None — per-slot allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +883.23 USDT (+8.83%)
Max Equity Drawdown: 1,380.62 USDT (12.94%)
Total Closed Trades: 800
Percent Profitable: 53.25% (426 / 800)
Profit Factor: 1.315
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect POL to respect. Pick Geometric for percent-spaced levels (default, recommended) or Arithmetic. Set Grid Levels (7–200) and Total Investment to match your risk profile.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful — this configuration produced 800 closed trades over the test window, well above the ~100-trade floor for statistical relevance.
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 36, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table (shows range, levels, owned slots, investment, per-slot size, open PnL, and cumulative realized net profit).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
BNB Grid - Long IndicatorBNB Grid — Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow on BNB / USDT between two fixed bounds. It tracks up to 17 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 7–200 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on BNB in range-bound regimes.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid execution.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a high-trade-count contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging. The table also accumulates the realized PnL from every closed slot (the exact round-trip profit between adjacent levels), so it shows how much the grid has actually earned over the chart history.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid-bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
- Calibrated for BNB 15m: Default bounds, level count, and step size are set against BNB's recent observed range. The 17-level geometric ladder gives roughly 1.0% per step — wide enough to clear perpetual taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Indicator:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep marking as owned as price falls and won't free until price reverses. The default High/Low (667 / 569) was set against BNB's recent observed range; update both whenever the regime changes.
Capital Deployment: The default Total Investment of 10,000 USDT is a virtual reference used for the avg-entry and open-PnL computation. The real sizing happens on the bot side — match the indicator's per-slot allocation to your bot's grid configuration to keep the avg-entry display honest.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment configured at the bot. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics over a ~3.8-month sample (330 closed trades, 72.42% win rate, 5.44% max drawdown, profit factor 3.061, +13.16% net return), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a BNB / USDT 15m chart.
🔸 Set the High and Low bounds to a range you expect BNB to respect.
🔸 Pick Geometric (default, recommended) or Arithmetic spacing.
🔸 Set Grid Levels (7–200) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_BNB).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 17, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table (shows status, range, levels, owned slots, avg entry, deployed capital, open PnL, and cumulative realized PnL).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
BNB Grid Bot - Long StrategyBNB Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that harvests volatility on BNB / USDT through repeated round-trips on a pre-defined ladder of price levels between two fixed bounds. Each level is an independent slot: when price crosses down through a level, the strategy opens one slot; when price subsequently crosses up through the level immediately above, that slot is closed for a fixed round-trip profit. The grid is generated geometrically by default, so spacing adapts to the price scale.
- Up to 17 simultaneous long slots at default settings, each sized as a fixed fraction of the configured Total Investment.
- No trailing exit, no stop loss — each slot's exit is the level above its entry.
- Per-slot exposure is approximately 5.88% of equity at default settings, inside the conventional 5–10% per-trade risk band.
- Every fill and close emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on BNB in range-bound regimes.
- Bot operators looking for a chart-driven signal source with per-slot webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a high-trade-count contributor with bounded per-trade risk.
- Range traders who prefer mechanical execution over discretionary entries.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots whose entry price is below current market simply wait until price comes back. This is the canonical grid-bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all 17 slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's primary risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All up to 200 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — derived from fill-by-fill bookkeeping, not synthetic averaging. The status table also reports the cumulative realized net profit (how much the grid has actually earned, in USDT and % of starting capital), so live performance is visible directly on the chart.
- Calibrated for BNB 15m: Default bounds, level count, and step size are set against BNB's recent observed range. The 17-level geometric ladder gives roughly 1.0% per step — wide enough to clear perpetual taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Strategy:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep loading as price falls and won't close until price reverses. The default High/Low (667 / 569) was set against BNB's recent observed range; update both whenever the regime changes.
Capital Deployment & Drawdown: The default Investment of 10,000 USDT equals 100% of starting capital — high-conviction setting that assumes the configured range holds. Per-slot risk remains moderate (~5.88% of equity), but if price collapses below the Low bound, aggregate unrealized loss can grow further. Scale the Investment input down to match the worst-case drawdown you are willing to absorb in a range-break scenario.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's per-trade risk is structurally capped by the per-slot allocation (Investment / N levels) — at defaults that is ~588 USDT per slot, inside the conventional 5–10% per-trade band. The aggregate unrealized exposure is controlled separately via the Investment input.
Trade Volume & Fees: Grid bots on 15m generate a high number of round-trips. The ~1.0% step is deliberately wider than a tight scalp grid so each round-trip comfortably clears the perpetual taker fee. The default commission (0.06% per trade) is calibrated for Bybit perpetual taker conditions; any mismatch with your exchange's actual fees will materially shift the results.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:BNBUSDT.P (Perpetual) — strategy is portable to any BNB / USDT pair.
Timeframe: 15M
Test Period: February 8, 2026 — June 2, 2026 (~3.8 months).
Initial Capital: 10,000 USDT.
Total Investment: 10,000 USDT (100% of capital, high-conviction setting).
Order Size per Slot: Investment / 17 ≈ 588 USDT (~5.88% of equity).
Commission: 0.06% per trade.
Slippage: 3 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 667 / Low 569 (range −14.69%).
Grid Levels: 17 (Geometric spacing, ~1.0% per step).
Stop Loss: None — per-slot allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +1,316.40 USDT (+13.16%)
Max Equity Drawdown: 583.18 USDT (5.44%)
Total Closed Trades: 330
Percent Profitable: 72.42% (239 / 330)
Profit Factor: 3.061
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect BNB to respect. Pick Geometric for percent-spaced levels (default, recommended) or Arithmetic. Set Grid Levels (7–200) and Total Investment to match your risk profile.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful (≥ 100 closed trades is a reasonable floor — at default settings the strategy typically generates several hundred round-trips per 3-month window on BNB 15m).
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 17, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table (shows range, levels, owned slots, investment, per-slot size, open PnL, and cumulative realized net profit).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
ETH Grid - Long IndicatorETH Grid — Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow on ETH / USDT between two fixed bounds. It tracks up to 23 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 7–200 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on ETH in range-bound regimes.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid execution.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a high-trade-count contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging. The table also accumulates the realized PnL from every closed slot (the exact round-trip profit between adjacent levels), so it shows how much the grid has actually earned over the chart history.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid-bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
- Calibrated for ETH 15m: Default bounds, level count, and step size are set against ETH's recent observed range. The 23-level geometric ladder gives roughly 1.0% per step — wide enough to clear perpetual taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Indicator:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep marking as owned as price falls and won't free until price reverses. The default High/Low (2165 / 1734) was set against ETH's recent observed range; update both whenever the regime changes.
Capital Deployment: The default Total Investment of 10,000 USDT is a virtual reference used for the avg-entry and open-PnL computation. The real sizing happens on the bot side — match the indicator's per-slot allocation to your bot's grid configuration to keep the avg-entry display honest.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment configured at the bot. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics over a ~3.8-month sample (355 closed trades, 67.32% win rate, 4.08% max drawdown, profit factor 2.433, +11.34% net return), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a ETH / USDT 15m chart.
🔸 Set the High and Low bounds to a range you expect ETH to respect.
🔸 Pick Geometric (default, recommended) or Arithmetic spacing.
🔸 Set Grid Levels (7–200) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_ETH).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 23, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table (shows status, range, levels, owned slots, avg entry, deployed capital, open PnL, and cumulative realized PnL).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
ETH Grid Bot - Long StrategyETH Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that harvests volatility on ETH / USDT through repeated round-trips on a pre-defined ladder of price levels between two fixed bounds. Each level is an independent slot: when price crosses down through a level, the strategy opens one slot; when price subsequently crosses up through the level immediately above, that slot is closed for a fixed round-trip profit. The grid is generated geometrically by default, so spacing adapts to the price scale.
- Up to 23 simultaneous long slots at default settings, each sized as a fixed fraction of the configured Total Investment.
- No trailing exit, no stop loss — each slot's exit is the level above its entry.
- Per-slot exposure is approximately 4.35% of equity at default settings, comfortably inside the 5–10% per-trade risk band.
- Every fill and close emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on ETH in range-bound regimes.
- Bot operators looking for a chart-driven signal source with per-slot webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a high-trade-count contributor with bounded per-trade risk.
- Range traders who prefer mechanical execution over discretionary entries.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots whose entry price is below current market simply wait until price comes back. This is the canonical grid-bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all 23 slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's primary risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All up to 200 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — derived from fill-by-fill bookkeeping, not synthetic averaging. The status table also reports the cumulative realized net profit (how much the grid has actually earned, in USDT and % of starting capital), so live performance is visible directly on the chart.
- Calibrated for ETH 15m: Default bounds, level count, and step size are set against ETH's recent observed range. The 23-level geometric ladder gives roughly 1.0% per step — wide enough to clear perpetual taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Strategy:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep loading as price falls and won't close until price reverses. The default High/Low (2165 / 1734) was set against ETH's recent observed range; update both whenever the regime changes.
Capital Deployment & Drawdown: The default Investment of 10,000 USDT equals 100% of starting capital — high-conviction setting that assumes the configured range holds. Per-slot risk remains low (~4.35% of equity), but if price collapses below the Low bound, aggregate unrealized loss can grow further. Scale the Investment input down to match the worst-case drawdown you are willing to absorb in a range-break scenario.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's per-trade risk is structurally capped by the per-slot allocation (Investment / N levels) — at defaults that is ~435 USDT per slot, well inside the conventional 5–10% per-trade band. The aggregate unrealized exposure is controlled separately via the Investment input.
Trade Volume & Fees: Grid bots on 15m generate a high number of round-trips. The ~1.0% step is deliberately wider than a tight scalp grid so each round-trip comfortably clears the perpetual taker fee. The default commission (0.06% per trade) is calibrated for Bybit perpetual taker conditions; any mismatch with your exchange's actual fees will materially shift the results.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:ETHUSDT.P (Perpetual) — strategy is portable to any ETH / USDT pair.
Timeframe: 15M
Test Period: February 8, 2026 — May 31, 2026 (~3.8 months).
Initial Capital: 10,000 USDT.
Total Investment: 10,000 USDT (100% of capital, high-conviction setting).
Order Size per Slot: Investment / 23 ≈ 435 USDT (~4.35% of equity).
Commission: 0.06% per trade.
Slippage: 3 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 2165 / Low 1734 (range −19.91%).
Grid Levels: 23 (Geometric spacing, ~1.0% per step).
Stop Loss: None — per-slot allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +1,133.70 USDT (+11.34%)
Max Equity Drawdown: 422.86 USDT (4.08%)
Total Closed Trades: 355
Percent Profitable: 67.32% (239 / 355)
Profit Factor: 2.433
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect ETH to respect. Pick Geometric for percent-spaced levels (default, recommended) or Arithmetic. Set Grid Levels (7–200) and Total Investment to match your risk profile.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful (≥ 100 closed trades is a reasonable floor — at default settings the strategy typically generates several hundred round-trips per 3-month window on ETH 15m).
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 23, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table (shows range, levels, owned slots, investment, per-slot size, open PnL, and cumulative realized net profit).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
XMR Grid - Long IndicatorXMR Grid — Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow on XMR / USDT between two fixed bounds. It tracks up to 37 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 7–200 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on XMR in range-bound regimes.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid execution.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a high-trade-count contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging. The table also accumulates the realized PnL from every closed slot (the exact round-trip profit between adjacent levels), so it shows how much the grid has actually earned over the chart history.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid-bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
- Calibrated for XMR 15m: Default bounds, level count, and step size are set against XMR's recent observed range. The 37-level geometric ladder gives roughly 1.0% per step — wide enough to clear perpetual taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Indicator:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep marking as owned as price falls and won't free until price reverses. The default High/Low (415 / 290) was set against XMR's recent observed range; update both whenever the regime changes.
Capital Deployment: The default Total Investment of 10,000 USDT is a virtual reference used for the avg-entry and open-PnL computation. The real sizing happens on the bot side — match the indicator's per-slot allocation to your bot's grid configuration to keep the avg-entry display honest.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment configured at the bot. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics over a ~3.2-month sample (733 closed trades, 72.71% win rate, 3.59% max drawdown, profit factor 2.48, +14.18% net return), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a XMR / USDT 15m chart.
🔸 Set the High and Low bounds to a range you expect XMR to respect.
🔸 Pick Geometric (default, recommended) or Arithmetic spacing.
🔸 Set Grid Levels (7–200) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_XMR).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 37, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table (shows status, range, levels, owned slots, avg entry, deployed capital, open PnL, and cumulative realized PnL).
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
XMR Grid Bot - Long StrategyXMR Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that harvests volatility on XMR / USDT through repeated round-trips on a pre-defined ladder of price levels between two fixed bounds. Each level is an independent slot: when price crosses down through a level, the strategy opens one slot; when price subsequently crosses up through the level immediately above, that slot is closed for a fixed round-trip profit. The grid is generated geometrically by default, so spacing adapts to the price scale.
- Up to 37 simultaneous long slots at default settings, each sized as a fixed fraction of the configured Total Investment.
- No trailing exit, no stop loss — each slot's exit is the level above its entry.
- Per-slot exposure is approximately 2.70% of equity at default settings, comfortably inside the 5–10% per-trade risk band.
- Every fill and close emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on XMR in range-bound regimes.
- Bot operators looking for a chart-driven signal source with per-slot webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a high-trade-count contributor with bounded per-trade risk.
- Range traders who prefer mechanical execution over discretionary entries.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots whose entry price is below current market simply wait until price comes back. This is the canonical grid-bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all 37 slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's primary risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All up to 200 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — derived from fill-by-fill bookkeeping, not synthetic averaging.
- Calibrated for XMR 15m: Default bounds, level count, and step size are set against XMR's recent observed range. The 37-level geometric ladder gives roughly 1.0% per step — wide enough to clear perpetual taker fees on each round-trip, granular enough to keep catching 15m swings inside the range.
🔷 Considerations Before Using the Strategy:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep loading as price falls and won't close until price reverses. The default High/Low (415 / 290) was set against XMR's recent observed range; update both whenever the regime changes.
Capital Deployment & Drawdown: The default Investment of 10,000 USDT equals 100% of starting capital — high-conviction setting that assumes the configured range holds. Per-slot risk remains low (~2.70% of equity), but if price collapses below the Low bound, aggregate unrealized loss can grow further. Scale the Investment input down to match the worst-case drawdown you are willing to absorb in a range-break scenario.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's per-trade risk is structurally capped by the per-slot allocation (Investment / N levels) — at defaults that is ~270 USDT per slot, well inside the conventional 5–10% per-trade band. The aggregate unrealized exposure is controlled separately via the Investment input.
Trade Volume & Fees: Grid bots on 15m generate a high number of round-trips. The ~1.0% step is deliberately wider than a tight scalp grid so each round-trip comfortably clears the perpetual taker fee. The default commission (0.06% per trade) is calibrated for Bybit perpetual taker conditions; any mismatch with your exchange's actual fees will materially shift the results.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:XMRUSDT.P (Perpetual) — strategy is portable to any XMR / USDT pair.
Timeframe: 15M
Test Period: February 22, 2026 — May 30, 2026 (~3.2 months).
Initial Capital: 10,000 USDT.
Total Investment: 10,000 USDT (100% of capital, high-conviction setting).
Order Size per Slot: Investment / 37 ≈ 270 USDT (~2.70% of equity).
Commission: 0.06% per trade.
Slippage: 3 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 415 / Low 290 (range −30.12%).
Grid Levels: 37 (Geometric spacing, ~1.0% per step).
Stop Loss: None — per-slot allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +1,418.07 USDT (+14.18%)
Max Equity Drawdown: 375.32 USDT (3.59%)
Total Closed Trades: 733
Percent Profitable: 72.71% (533 / 733)
Profit Factor: 2.48
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect XMR to respect. Pick Geometric for percent-spaced levels (default, recommended) or Arithmetic. Set Grid Levels (7–200) and Total Investment to match your risk profile.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful (≥ 100 closed trades is a reasonable floor — at default settings the strategy typically generates several hundred round-trips per 3-month window on XMR 15m).
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 37, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
LINK Grid - Long IndicatorLINK Grid — Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow on LINK / USDT between two fixed bounds. It tracks up to 36 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 7–200 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on LINK in range-bound regimes.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid execution.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a high-trade-count contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 0.6% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid-bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
- Calibrated for LINK 15m: Default bounds, level count, and step size are set against LINK's recent observed range — granular enough to catch frequent 15m round-trips, wide enough to avoid fee churn.
🔷 Considerations Before Using the Indicator:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep marking as owned as price falls and won't free until price reverses. The default High/Low (10.07 / 8.17) was set against LINK's recent observed range; update both whenever the regime changes.
Capital Deployment: The default Total Investment of 10,000 USDT is a virtual reference used for the avg-entry and open-PnL computation. The real sizing happens on the bot side — match the indicator's per-slot allocation to your bot's grid configuration to keep the avg-entry display honest.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment configured at the bot. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics over a 3.5-month sample (~1,285 closed trades, 61.79% win rate, 9.96% max drawdown, profit factor 1.621, +14.82% net return), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a LINK / USDT 15m chart.
🔸 Set the High and Low bounds to a range you expect LINK to respect.
🔸 Pick Geometric (default, recommended) or Arithmetic spacing.
🔸 Set Grid Levels (7–200) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_LINK).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 36, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
LINK Grid Bot - Long StrategyLINK Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that harvests volatility on LINK / USDT through repeated round-trips on a pre-defined ladder of price levels between two fixed bounds. Each level is an independent slot: when price crosses down through a level, the strategy opens one slot; when price subsequently crosses up through the level immediately above, that slot is closed for a fixed round-trip profit. The grid is generated geometrically by default, so spacing adapts to the price scale.
- Up to 36 simultaneous long slots at default settings, each sized as a fixed fraction of the configured Total Investment.
- No trailing exit, no stop loss — each slot's exit is the level above its entry.
- Per-slot exposure is approximately 2.78% of equity at default settings, comfortably inside the 5–10% per-trade risk band.
- Every fill and close emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on LINK in range-bound regimes.
- Bot operators looking for a chart-driven signal source with per-slot webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a high-trade-count contributor with bounded per-trade risk.
- Range traders who prefer mechanical execution over discretionary entries.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 0.6% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots whose entry price is below current market simply wait until price comes back. This is the canonical grid-bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all 36 slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's primary risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All up to 200 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — derived from fill-by-fill bookkeeping, not synthetic averaging.
- Calibrated for LINK 15m: Default bounds, level count, and step size are set against LINK's recent observed range. The 36-level geometric ladder gives roughly 0.6% per step — granular enough to catch frequent 15m round-trips, wide enough to avoid fee churn.
🔷 Considerations Before Using the Strategy:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep loading as price falls and won't close until price reverses. The default High/Low (10.07 / 8.17) was set against LINK's recent observed range; update both whenever the regime changes.
Capital Deployment & Drawdown: The default Investment of 10,000 USDT equals 100% of starting capital — high-conviction setting that assumes the configured range holds. Backtest produced a 9.96% maximum equity drawdown at default settings, right at the upper edge of PulseWire's typical 5–10% per-trade band. Per-slot risk remains low (~2.78% of equity), but if price collapses below the Low bound, aggregate unrealized loss can grow further. Scale the Investment input down to match the worst-case drawdown you are willing to absorb in a range-break scenario.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's per-trade risk is structurally capped by the per-slot allocation (Investment / N levels) — at defaults that is 278 USDT per slot, well inside the conventional 5–10% per-trade band. The aggregate unrealized exposure is controlled separately via the Investment input.
Trade Volume & Fees: Grid bots on 15m generate a very high number of round-trips. The backtest produced 1,285 closed trades in 3.5 months — exceptional sample size, but also high cumulative fee load. The default commission (0.1% per trade) is calibrated for Binance / Bybit spot taker conditions; any mismatch with your exchange's actual fees will materially shift the results.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: BINANCE:LINKUSDT (Spot) — strategy is portable to any LINK / USDT pair.
Timeframe: 15M
Test Period: February 11, 2026 — May 27, 2026 (~3.5 months).
Initial Capital: 10,000 USDT.
Total Investment: 10,000 USDT (100% of capital, high-conviction setting).
Order Size per Slot: Investment / 36 ≈ 278 USDT (~2.78% of equity).
Commission: 0.1% per trade.
Slippage: 3 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 10.07 / Low 8.17 (range −18.87%).
Grid Levels: 36 (Geometric spacing, ~0.6% per step).
Stop Loss: None — per-slot allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +1,482.00 USDT (+14.82%)
Max Equity Drawdown: 1,092.02 USDT (9.96%)
Total Closed Trades: 1,285
Percent Profitable: 61.79% (794 / 1,285)
Profit Factor: 1.621
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect LINK to respect. Pick Geometric for percent-spaced levels (default, recommended) or Arithmetic. Set Grid Levels (7–200) and Total Investment to match your risk profile.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful (≥ 100 closed trades is a reasonable floor — at default settings the strategy typically generates several hundred to over a thousand round-trips per 3-month window on LINK 15m).
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 36, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
NVDAX Grid - Long IndicatorNVDAX Grid — Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow on NVDAX / USDT between two fixed bounds. It tracks up to 56 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 7–200 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on tokenized equity pairs in range-bound regimes.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid execution.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a high-trade-count contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 0.58–0.85% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid-bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
- Calibrated for NVDAX 15m: Default bounds, level count, and step size are set against NVDAX's observed historical range — granular enough to catch frequent 15m round-trips, wide enough to avoid fee churn.
🔷 Considerations Before Using the Indicator:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep marking as owned as price falls and won't free until price reverses. The default High/Low (226.83 / 154.16) was set against NVDAX's observed range; update both whenever the regime changes.
Tokenized Equity Specifics: NVDAX is a tokenized derivative tracking NVDA equity. Off-hours liquidity and gap behavior can differ from spot crypto pairs — review the asset's session profile before relying on the signal stream for live deployment.
Capital Deployment: The default Total Investment of 10,000 USDT is a virtual reference used for the avg-entry and open-PnL computation. The real sizing happens on the bot side — match the indicator's per-slot allocation to your bot's grid configuration to keep the avg-entry display honest.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment configured at the bot. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics over a four-month sample (~542 closed trades, 4.60% max drawdown, profit factor 2.098), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a NVDAX / USDT 15m chart.
🔸 Set the High and Low bounds to a range you expect NVDAX to respect.
🔸 Pick Geometric (default, recommended) or Arithmetic spacing.
🔸 Set Grid Levels (7–200) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_NVDAX).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 56, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
NVDAX Grid Bot - Long StrategyNVDAX Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that harvests volatility on NVDAX / USDT through repeated round-trips on a pre-defined ladder of price levels between two fixed bounds. Each level is an independent slot: when price crosses down through a level, the strategy opens one slot; when price subsequently crosses up through the level immediately above, that slot is closed for a fixed round-trip profit. The grid is generated geometrically by default, so spacing adapts to the price scale.
- Up to 56 simultaneous long slots at default settings, each sized as a fixed fraction of the configured Total Investment.
- No trailing exit, no stop loss — each slot's exit is the level above its entry.
- Per-slot exposure is approximately 1.8% of equity at default settings, comfortably inside the 5–10% per-trade risk band.
- Every fill and close emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on tokenized equity pairs in range-bound regimes.
- Bot operators looking for a chart-driven signal source with per-slot webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a high-trade-count contributor with bounded per-trade risk.
- Range traders who prefer mechanical execution over discretionary entries.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 0.58–0.85% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots whose entry price is below current market simply wait until price comes back. This is the canonical grid-bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all 56 slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's primary risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All up to 200 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — derived from fill-by-fill bookkeeping, not synthetic averaging.
- Calibrated for NVDAX 15m: Default bounds, level count, and step size are set against NVDAX's observed historical range. The 56-level geometric ladder gives roughly 0.58–0.85% per step — granular enough to catch frequent 15m round-trips, wide enough to avoid fee churn.
🔷 Considerations Before Using the Strategy:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep loading as price falls and won't close until price reverses. The default High/Low (226.83 / 154.16) was set against NVDAX's observed range; update both whenever the regime changes.
Tokenized Equity Specifics: NVDAX is a tokenized derivative tracking NVDA equity. Off-hours liquidity and gap behavior can differ from spot crypto pairs — review the asset's session profile before relying on the backtest numbers for live deployment.
Capital Deployment: The default Investment of 10,000 USDT equals 100% of starting capital — this is a high-conviction setting that assumes the configured range holds. Per-slot risk remains low (~1.8% of capital), but if price collapses far below the Low bound, the aggregate unrealized loss can be substantial. Scale the Investment input down to match the worst-case drawdown you are willing to absorb in a range-break scenario.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's per-trade risk is structurally capped by the per-slot allocation (Investment / N levels) — at defaults that is 179 USDT per slot, well inside the conventional 5–10% per-trade band. The aggregate unrealized exposure is controlled separately via the Investment input.
Trade Volume & Fees: Grid bots on 15m generate a high number of round-trips. The default commission (0.1% per trade) is calibrated for Bybit spot taker conditions; any mismatch with your exchange's actual fees will materially shift the results given the high trade count.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:NVDAXUSDT (Spot)
Timeframe: 15min
Test Period: January 23, 2026 — May 24, 2026 (~4 months).
Initial Capital: 10,000 USDT.
Total Investment: 10,000 USDT (100% of capital, high-conviction setting).
Order Size per Slot: Investment / 56 ≈ 179 USDT (~1.8% of equity).
Commission: 0.1% per trade.
Slippage: 3 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 226.83 / Low 154.16 (range −30%).
Grid Levels: 56 (Geometric spacing, ~0.58–0.85% per step).
Stop Loss: None — per-slot allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +662.81 USDT (+6.63%)
Max Equity Drawdown: 468.04 USDT (4.60%)
Total Closed Trades: 542
Percent Profitable: 62.55% (339 / 542)
Profit Factor: 2.098
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect NVDAX to respect. Pick Geometric for percent-spaced levels (default, recommended) or Arithmetic. Set Grid Levels (7–200) and Total Investment to match your risk profile.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful (≥ 100 closed trades is a reasonable floor — at default settings the strategy typically generates several hundred round-trips per 90-day window on NVDAX 15m).
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 56, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
TON Grid - Long IndicatorTON Grid - Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow on TON / USDT between two fixed bounds. It tracks up to 67 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 7–200 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on TON in range-bound regimes.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid execution.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a high-trade-count contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 0.6–1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid-bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
- Calibrated for TON 15m: Default bounds, level count, and step size are set against TON's observed historical range — granular enough to catch frequent 15m round-trips, wide enough to avoid fee churn.
🔷 Considerations Before Using the Indicator:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep marking as owned as price falls and won't free until price reverses. The default High/Low (2.04 / 1.211) was set against TON's observed range; update both whenever the regime changes.
Capital Deployment: The default Total Investment of 10,000 USDT is a virtual reference used for the avg-entry and open-PnL computation. The real sizing happens on the bot side — match the indicator's per-slot allocation to your bot's grid configuration to keep the avg-entry display honest.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment configured at the bot. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics over a four-month sample (~768 closed trades, 3.05% max drawdown, profit factor 2.888), use the companion strategy version on identical parameters.
🔷 How to Use It:
🔸 Add the indicator to a TON / USDT 15m chart.
🔸 Set the High and Low bounds to a range you expect TON to respect.
🔸 Pick Geometric (default, recommended) or Arithmetic spacing.
🔸 Set Grid Levels (7–200) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_TON).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 67, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
TON Grid Bot - Long StrategyTON Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that harvests volatility on TON / USDT through repeated round-trips on a pre-defined ladder of price levels between two fixed bounds. Each level is an independent slot: when price crosses down through a level, the strategy opens one slot; when price subsequently crosses up through the level immediately above, that slot is closed for a fixed round-trip profit. The grid is generated geometrically by default, so spacing adapts to the price scale.
- Up to 67 simultaneous long slots at default settings, each sized as a fixed fraction of the configured Total Investment.
- No trailing exit, no stop loss — each slot's exit is the level above its entry.
- Per-slot exposure is approximately 1.5% of equity at default settings, comfortably inside the 5–10% per-trade risk band.
- Every fill and close emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on TON in range-bound regimes.
- Bot operators looking for a chart-driven signal source with per-slot webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a high-trade-count contributor with bounded per-trade risk.
- Range traders who prefer mechanical execution over discretionary entries.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing — approximately 0.6–1.0% per step at default settings. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots whose entry price is below current market simply wait until price comes back. This is the canonical grid-bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all 67 slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's primary risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All up to 200 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — derived from fill-by-fill bookkeeping, not synthetic averaging.
- Calibrated for TON 15m: Default bounds, level count, and step size are set against TON's observed historical range. The 67-level geometric ladder gives roughly 0.6–1.0% per step — granular enough to catch frequent 15m round-trips, wide enough to avoid fee churn.
🔷 Considerations Before Using the Strategy:
Market Selection & Range Validity: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends below the configured Low, slots will keep loading as price falls and won't close until price reverses. The default High/Low (2.04 / 1.211) was set against TON's observed range; update both whenever the regime changes.
Capital Deployment: The default Investment of 10,000 USDT equals 100% of starting capital — this is a high-conviction setting that assumes the configured range holds. Per-slot risk remains low (~1.5% of capital), but if price collapses far below the Low bound, the aggregate unrealized loss can be substantial. Scale the Investment input down to match the worst-case drawdown you are willing to absorb in a range-break scenario.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's per-trade risk is structurally capped by the per-slot allocation (Investment / N levels) — at defaults that is 149 USDT per slot, well inside the conventional 5–10% per-trade band. The aggregate unrealized exposure is controlled separately via the Investment input.
Trade Volume & Fees: Grid bots on 15m generate a very high number of round-trips. The default commission (0.1% per trade) is calibrated for Bybit / Binance spot taker conditions; any mismatch with your exchange's actual fees will materially shift the results given the high trade count.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: BINANCE:TONUSDT (Spot) — strategy is portable to any TON / USDT pair.
Timeframe: 15M
Test Period: January 23, 2026 — May 23, 2026 (~4 months).
Initial Capital: 10,000 USDT.
Total Investment: 10,000 USDT (100% of capital, high-conviction setting).
Order Size per Slot: Investment / 67 ≈ 149 USDT (~1.5% of equity).
Commission: 0.1% per trade.
Slippage: 3 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 2.04 / Low 1.211 (range −38.86%).
Grid Levels: 67 (Geometric spacing, ~0.6–1.0% per step).
Stop Loss: None — per-slot allocation is the structural risk cap.
Trailing: None.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +1,001.46 USDT (+10.01%)
Max Equity Drawdown: 343.54 USDT (3.05%)
Total Closed Trades: 768
Percent Profitable: 60.81% (467 / 768)
Profit Factor: 2.888
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect TON to respect. Pick Geometric for percent-spaced levels (default, recommended) or Arithmetic. Set Grid Levels (7–200) and Total Investment to match your risk profile.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful (≥ 100 closed trades is a reasonable floor — at default settings the strategy typically generates several hundred to several thousand round-trips per 90-day window on TON 15m).
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 67, range 7–200).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
XAU Grid - Long IndicatorXAU Grid — Long Indicator
🔷 What it does:
This is a signal-only indicator that mirrors a price-grid long workflow between two fixed bounds. It tracks up to 48 independent virtual slots between a configurable High and Low — each slot fires a webhook-ready buy signal when price crosses down through it, and a paired sell signal when price subsequently crosses up through the slot immediately above. The indicator computes a running average entry, total deployed capital, and open PnL from the live slot ledger and renders all of it on the chart.
- Pre-computes 5–50 grid levels in Geometric (default) or Arithmetic spacing.
- Each slot is an independent ownership flag with its own buy/sell webhook payload.
- Avg entry is derived from fill-by-fill bookkeeping — total cost and total qty are updated on every event.
- Every event emits a webhook-ready JSON alert payload tagged with the specific grid slot.
🔷 Who is it for:
- Swing traders harvesting volatility on range-bound assets where directional bias is unclear.
- Bot operators looking for a chart-driven signal source that emits per-slot JSON ready for a DCA Bot configured for grid emulation.
- Traders who want to monitor a virtual grid state — avg entry, owned slots, deployed capital, open PnL — directly on the chart without a backtest engine.
- Portfolio operators using a low-volatility contributor alongside directional strategies.
🔷 How does it work:
Grid Construction: On script load, the indicator computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot State Machine: Each grid level is an independent slot tracked by a boolean ownership flag. When close price crosses down through an empty slot's level, the slot is marked owned, virtual cost-basis is added, and the BUY webhook payload is dispatched. When close price crosses up through the level immediately above an owned slot, the slot is marked free, virtual cost-basis is subtracted, and the SELL webhook payload is dispatched.
Honest Virtual Bookkeeping: Total cost and total qty are updated incrementally on each event, so the avg entry, deployed capital, and open PnL displayed in the status table reflect the actual broker-equivalent position state — no shortcuts from base entry, no synthetic averaging.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The indicator never trails the exit and never signals a slot-out for a loss — slots that fall below their entry stay owned until price comes back. This is the canonical grid bot behavior.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every BUY and SELL emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The indicator can drive a DCA Bot configured for grid emulation without any glue layer.
- Fill-by-Fill Avg Entry: The orange avg-entry line is derived from running totals updated on every event — what you see is what the broker-equivalent position would actually have.
- Active Slot Highlighting: Owned grid levels are rendered with a thicker green stroke; empty slots stay dashed gray. Slot density and current loading are visible at a glance.
- Range Box & Bounds Labels: A semi-transparent box spans the configured High/Low range, and crisp HIGH/LOW labels mark the bounds — the grid topology is obvious without zooming.
🔷 Considerations Before Using the Indicator:
Market Selection: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends, the indicator will keep marking slots as owned as price moves away and won't free any until price reverses. Pick assets that respect a defined range, and re-tune High/Low whenever the regime changes.
Range Configuration: The default High/Low (4857.27 / 3568.69) was set against XAUTUSDT historical extremes. Update both bounds before deploying on any other asset — the Geometric spacing is sensitive to the bounds ratio.
Cross Detection Granularity: Crossings are detected on bar close, comparing the current close to the previous close. A bar that spikes through a level and returns within the same bar may be missed by design — this prevents over-signaling on intra-bar wicks.
Live vs Historical State: The virtual slot ledger is rebuilt from chart history each time the indicator is recompiled. If the indicator is added mid-deployment or the live bot diverges from the signal stream (manual interventions, partial fills), the indicator state may not match the live bot. Toggle the indicator off and on to reset.
No Stop Loss: There is no exit signal on adverse moves below the lowest grid level. Risk is structurally capped on the bot side by the bounded Total Investment input. If a hard stop is required, layer it on the bot side.
Backtesting Note: This is an indicator, not a strategy. There is no built-in P&L tester. For performance metrics, use the companion strategy version on the same parameters.
🔷 How to Use It:
🔸 Add the indicator to a chart on the asset and timeframe you want to trade.
🔸 Set the High and Low bounds to a range you expect the asset to respect.
🔸 Pick Geometric (default, recommended for crypto and commodities) or Arithmetic spacing.
🔸 Set Grid Levels (5–50) and the virtual Total Investment used for avg-entry computation.
🔸 In the DCA Bot Webhook group, paste your Bot ID, Email Token, and Pair (QUOTE_BASE format, e.g., USDT_XAU).
🔸 Create an alert on the indicator with "Any alert() function call". Paste the DCA Bot's webhook URL into the alert's Webhook field. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The highest level a slot can be created from.
Low Price: Bottom of the grid. The lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 48, capped at 50).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Virtual capital allocated across all slots. Used for the avg-entry and open-PnL computation only.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, signal triangles, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
XAU Grid Bot - Long StrategyXAU Grid Bot — Long Strategy
🔷 What it does:
This is a long-only price-grid strategy that operates between two fixed bounds and harvests volatility through repeated round-trips on a pre-defined ladder of price levels. Each level is an independent slot: when price crosses down through a level, the strategy buys one slot; when price crosses up through the level immediately above, that slot is closed for a fixed profit. The grid is generated geometrically by default (constant percent step), so the spacing adapts to the asset's scale.
- Up to 48 simultaneous long slots, each sized as a fixed fraction of the total investment.
- No trailing exit, no stop loss — the exit for each slot is the level above its entry, full stop.
- Risk is structurally capped by bounded total investment (default 20% of equity) — if all 48 slots fill, maximum exposure equals the configured investment and cannot exceed it.
🔷 Who is it for:
- Swing traders harvesting volatility on range-bound assets where directional bias is unclear.
- Traders who want a fully mechanical, no-judgment system that runs around the clock.
- Bot operators looking for a chart-driven signal source with per-level webhook JSON ready to drive a DCA Bot configured for grid execution.
- Traders running a portfolio of low-correlation strategies who want a low-drawdown contributor.
🔷 How does it work:
Grid Construction: On script load, the strategy computes N price levels between the configured High and Low bounds. In Geometric mode (default), level k is at High × (Low/High)^(k/(N-1)), giving constant percent spacing. In Arithmetic mode, levels are linearly spaced by absolute price.
Per-Slot Logic: Each grid level is an independent slot tracked by a boolean ownership flag. When bar close moves price down through an empty slot's level, a long is opened at that level for one slot's worth of capital (Investment / N). When bar close moves price up through the level immediately above an owned slot, that slot is closed, locking the round-trip profit between the two adjacent levels.
No Trailing, No Stop Loss: By design, each slot has a fixed exit (the level above). The strategy never trails the exit and never stops a slot out for a loss — slots that fall below their entry simply wait until price comes back. This is the canonical grid bot behavior.
Capital Bounds: Total deployed capital cannot exceed the configured Investment. When all slots are filled, no new orders are opened until price rises and starts closing slots. This structural cap is the strategy's risk control.
🔷 Why it's unique:
- Per-Level Webhook Ledger: Every fill and close emits a fully-formed JSON alert payload tagged with the specific grid slot ("Grid_BUY_L5" / "Grid_TP_L5"). The strategy can drive a DCA Bot configured for grid emulation without any glue layer.
- Pre-Allocated State: All 48 slot ledgers live in fixed-size arrays, so state lookups are constant-time and the chart can render every active slot with no performance overhead even at maximum density.
- Honest Backtest Surface: The avg entry line plotted on the chart and the open PnL displayed in the status table both reflect the actual broker-equivalent position state — no shortcut from base entry, no synthetic averaging.
🔷 Considerations Before Using the Strategy:
Market Selection: Grid strategies are most profitable in range-bound, mean-reverting markets. On strong directional trends, the strategy will keep loading slots as price moves away and won't close any until price reverses. Pick assets that respect a defined range, and re-tune High/Low whenever the regime changes.
Range Configuration: The default High/Low (4857.27 / 3568.69) was set against XAUTUSDT historical extremes. Update both bounds before deploying on any other asset — the Geometric spacing is sensitive to the bounds ratio.
No Stop Loss Justification: There is no exit on adverse moves below the lowest grid level. The strategy's risk is structurally capped by total Investment — at default settings, the maximum deployed capital across all 48 slots is 2,000 USDT = 20% of equity, and the bounded slot count prevents further drawdown beyond that. If price collapses far below the Low bound, that 20% is held at unrealized loss until recovery. Size the Investment input to match the maximum drawdown you are willing to absorb in a range-break scenario.
Trade Volume & Fees: Grid bots generate a high number of round-trips. At default settings, the backtest produced 556 closed trades in 13 months. Realistic commission and slippage are baked into the script; any mismatch with your exchange's actual fees will materially shift the results.
Demo Testing: Always demo-test before going live. Past results do not guarantee future performance, especially on a strategy whose profitability is bounded by the chosen High/Low range remaining valid.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:XAUTUSDT (Spot)
Timeframe: 15M
Test Period: Sept 1, 2025 — May 21, 2026 (~13 months)
Initial Capital: 10,000 USDT.
Order Size per Slot: Investment / Grid Levels (default 2,000 / 48 ≈ 41.67 USDT, ~0.42% of equity per slot).
Max Capital Deployed: 2,000 USDT (~20% of equity if all 48 slots fill).
Commission: 0.06% per trade.
Slippage: 5 ticks.
Margin for Long Positions: 100%.
Indicator Settings: Default Configuration.
Grid Bounds: High 4857.27 / Low 3568.69.
Grid Levels: 48 (Geometric spacing).
Stop Loss: None — bounded position size is the structural risk cap.
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +101.99 USDT (+1.02%)
Max Equity Drawdown: 64.03 USDT (0.64%)
Total Closed Trades: 556
Percent Profitable: 67.27% (374 / 556)
Profit Factor: 2.267
🔷 How to Use It:
🔸 Adjust Settings: Open the strategy inputs and set the High and Low bounds to a range you expect the asset to respect. Pick Geometric for percent-spaced levels (default, recommended for crypto and commodities) or Arithmetic for linearly-spaced levels. Set Grid Levels (5–50) and Total Investment.
🔸 Results Review: Run a full-period backtest and confirm Max Drawdown stays within your personal risk band. Validate that the trade count is high enough to be statistically meaningful (≥ 100 closed trades is a reasonable floor).
🔸 Create alerts to trigger the DCA Bot: Add one alert on the strategy using "Any alert() function call". Paste your DCA Bot's webhook URL into the alert's Webhook field, and fill the Bot ID, Email Token, and Pair inputs on the script. Every grid-level buy and grid-level close will emit a dedicated JSON payload tagged with the slot index, so each level can be tracked independently downstream.
🔷 INDICATOR SETTINGS
High Price: Top of the grid. The very highest level a slot can be created from.
Low Price: Bottom of the grid. The very lowest level a slot can be created from.
Grid Levels: Number of price levels between High and Low (default 48, capped at 50).
Spacing Mode: Geometric (constant percent step) or Arithmetic (constant absolute step).
Total Investment (USDT): Total capital allocated across all slots. Per-slot size = Investment / Grid Levels.
Bot ID / Email Token / Pair: Webhook fields injected into every alert payload.
Visualization: Toggle grid lines, range box, HIGH/LOW labels, avg entry plot, fill labels, status table.
Brand Watermark: Configurable text, position, size, and transparency.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
[3Commas] UNI Vault Grid - UNI - Indicator UNI Vault Grid — UNI — Indicator
🔷 What it does:
This indicator is the visual + signal-only companion to the static geometric grid strategy for Uniswap (UNI/USDT). It draws all 57 grid levels on the chart, fires Buy and Sell signals on each close-cross event, tracks a virtual P&L card (simulating what the matching strategy would have done), and ships webhook alerts for routing signals to a connected grid bot. Use it when you want the grid logic running on your chart without strategy.* engine — for visual confirmation, manual entries, or external bot routing.
- 57 geometrically-spaced levels between Low (2.979) and High (4.171) drawn as horizontal lines
- Buy / Sell labels printed at each level on cross events
- Virtual P&L tracker mirrors the strategy version's bookkeeping
- Static range — grid does NOT shift up when price exits the band (trailing-up disabled)
- Webhook-ready alert payload for connected grid bot
🔷 Who is it for:
Traders who want to visualize the grid and signal layer on their chart without running the strategy engine.
Bot operators routing signals from PulseWire alerts to a connected grid bot via webhook.
Discretionary swing traders who want grid levels as decision support while executing manually.
Users comparing live signal flow against backtested behavior of the matching strategy publication.
🔷 How does it work:
Grid Construction: On the first bar, the indicator pre-computes 57 price levels between Low (2.979) and High (4.171) using geometric spacing (≈ 0.61% step). Each level is drawn as a horizontal line — green for the lowest, red for the highest, aqua for the middle levels.
Signal Generation: On every confirmed bar, the indicator checks each level for a close-cross-down (Buy signal) or close-cross-up (Sell signal) against the next level above. A label is printed at the level on each cross. Buy labels are aqua, Sell labels are fuchsia and include the realized virtual P&L.
Virtual P&L Tracker: The indicator maintains its own bookkeeping that mirrors the strategy version — when a Buy level fills, qty is recorded; when the next-up Sell level crosses, the per-level P&L is added to the virtual net. Stats card displays Net P&L, Max Drawdown, Total Fills, Win Rate, and Profit Factor.
Webhook Alerts: A grid_start JSON payload (Bot ID, Email Token, Pair) is fired once when the first bar enters the configured backtest window. This is informational — grid bots are typically configured on the bot interface directly.
🔷 Why it's unique:
Identical grid math to the strategy publication — same 57 levels, same step, same cross-detection logic. The virtual P&L card lets you see live what the strategy version is doing in backtest, but on an indicator pane (no strategy.* engine, no order fills).
Static range fidelity — no trailing-up. The grid stays locked exactly where you configured it, which makes risk envelope easy to reason about before deploying capital.
Brand watermark + stats overlay — consistent visual layer with all other 3Commas Vault Grid publications.
🔷 Considerations Before Using the Indicator:
Market & Timeframe: Calibrated for a 15-minute chart on UNI/USDT spot pairs. The runtime warning label flags any TF other than 15m. Higher TFs produce far fewer fills; lower TFs (1m, 5m) generate more signals but slow chart rendering.
Limitations: The indicator does NOT place orders — it only signals. If you wire the alerts to a grid bot, the bot is responsible for executing entries and exits. The virtual P&L card is an in-indicator simulation only, not a real account P&L. It does not include funding, slippage, or partial fills.
Backtesting & Demo Testing: The strategy version is the canonical reference for realized backtest performance (with commission, slippage, and the strategy engine's order book). This indicator's virtual P&L is a useful estimate but cannot replace the strategy tester report. Demo-trade your bot for at least one month before any live deployment.
Parameter Adjustments: The grid range, level count, and per-level amount should be re-evaluated for each deployment period. UNI's "fair range" shifts over time — a grid calibrated for one regime may not work for the next. The default 2.979 — 4.171 envelope reflects UNI's recent volatility band as of publication.
🔷 INDICATOR SETTINGS
Grid High Price — Upper boundary of the grid range (default 4.171).
Grid Low Price — Lower boundary of the grid range (default 2.979).
Grid Levels — Total number of price levels (default 57).
Grid Mode — Geometric (constant % spacing) or Arithmetic (constant absolute spacing).
Amount per Level (USDT, ref) — Notional per fill (default 175.44) — used for virtual P&L only.
Trailing Up — Disabled by default. Enables adaptive grid behavior on breakout (off keeps grid static).
Trail Up Threshold % — % above High at which trailing fires (only used if Trailing Up enabled).
Shift Up Magnitude % — How much of the current range to shift when trailing-up fires.
Limit by Date Range — Constrain virtual backtest to a specific date window (default Jan 19 — May 19 2026).
Initial Capital (USDT, ref for % calc) — Used to convert virtual P&L into a % figure on the stats card.
Show grid lines on chart — Toggle horizontal level lines (red top, green bottom, aqua middle).
Show fill labels on chart — Toggle Buy / Sell labels printed on each cross.
Show stats card — Toggle the on-chart virtual backtest summary.
Stats card position — Where to anchor the stats card.
Show watermark — Toggle the brand watermark.
Watermark text / position / size / transparency — Controls for the watermark overlay.
Recommended TF (for warning) — Timeframe baseline for runtime warning (default 15m).
Webhook (Grid Bot) — Bot ID, Email Token, Pair label for signal routing.
🔷 ALERTS
grid_start — Fires once when the first bar enters the configured backtest window. Webhook-ready JSON payload with Bot ID, Email Token, and Pair label.
🔷 RELATED PUBLICATIONS
Strategy version (with full Strategy Tester backtest report): [https://www.pulsewire.com/script/Dc5iUh2F-3Commas-UNI-Vault-Grid-UNI-USDT/
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
[3Commas] UNI Vault Grid - UNI/USDT UNI Vault Grid — UNI/USDT
🔷 What it does:
This strategy implements a static geometric grid trading system for Uniswap (UNI), designed to capture range-bound oscillations between a configurable High and Low price boundary. It pre-computes 57 price levels using geometric spacing (≈ 0.61% step), buys at each level on close-cross-down, and sells at the next level up on close-cross-up. Unlike adaptive grid variants with trailing logic, this version stays locked to the original range — no auto-shift up. Profit comes from capturing the spread between adjacent grid lines on every oscillation; the structure is designed for periods where UNI consolidates within a defined band rather than trending strongly in one direction.
- 57 geometrically-spaced levels between Low (2.979) and High (4.171)
- Buy on close-cross-down through an unfilled level; sell on close-cross-up through the next level
- Fixed notional per level (175.44 USDT default), all fills equally sized
- No trailing up — grid stays locked to the configured range
- No stop loss — positions held until matching sell level is hit
🔷 Who is it for:
Swing traders who identify ranging conditions on UNI and want to monetize the oscillations.
Bot operators who automate grid execution through webhook integration with a connected bot.
Spot accumulators with a directional view that UNI will remain inside the configured boundaries during the deployment period.
Risk-conscious participants who prefer predictable accumulation envelopes (capped at full-grid-filled at the Low boundary).
🔷 How does it work:
Long Entry: When close crosses down through an unfilled grid level, the strategy opens a long position sized to the per-level notional amount (default 175.44 USDT). Each level operates independently — multiple buys can stack across the ladder simultaneously during a downward swing, creating a structured accumulation pattern.
Short Entry: Not used — this is a long-only spot grid.
Exit Management: For each filled level, the strategy places a limit exit at the next level up. When close crosses up through that target, the position closes and the level becomes available to buy again. No stop loss is used; the grid's Low boundary defines the structural worst-case accumulation point.
Static range — the grid does NOT shift when price exits the boundary. If price breaks above High, the strategy stops opening new buys until price returns inside the band. If price breaks below Low, all 57 levels are filled and the position holds unrealized loss until either the average is recovered or the user manually closes.
🔷 Why it's unique:
Pure static range design — most grid implementations include trailing-up logic that compromises the original risk envelope when price trends. This variant stays locked to the configured range, which gives a fully predictable worst-case scenario: maximum unrealized loss is bounded by (Current Price − Grid Low) × Total Position at Low. Traders know exactly what they are signing up for before deploying capital.
Calibrated for UNI's DEX-token volatility — the 0.61% step and 57-level ladder are dense enough to capture UNI's higher-frequency intraday oscillations (typical of mid-cap altcoins with active DEX flow) while keeping the configured envelope tight. This contrasts with sparser grids used for majors like ETH/BTC where each step needs to be wider to match the larger absolute moves.
Bot Integration — entry alerts ship with webhook-ready JSON payloads. The grid_start alert fires once on first activation. Bot ID, Email Token, and pair label are exposed as inputs.
🔷 Considerations Before Using the Indicator:
Market & Timeframe: This strategy is calibrated for a 15-minute chart on UNI/USDT spot pairs with active intraday range. Fill density depends directly on how often close crosses grid levels. Higher timeframes (1h+) produce far fewer fills; lower timeframes (1m, 5m) generate more fills but slow backtests on PulseWire's plan limits. The runtime warning label flags any TF other than 15m.
Limitations: No stop loss and no trailing range adjustment. The strategy is structurally exposed to two failure modes:
(1) Price breaks above High — strategy idles, no new fills until reversal back into range
(2) Price breaks below Low — all 57 levels fill, unrealized loss accumulates until average is recovered or position is manually closed
This is the trade-off of a pure static grid: predictable risk envelope, but no adaptive protection against trend breakouts. Pair this strategy with manual range validation and an exit plan before deploying capital.
Backtesting & Demo Testing: Always validate the grid range and step size on historical data for the specific instrument. UNI's volatility profile shifts across DeFi cycles — what was a ranging instrument can become a strong-trend instrument and vice versa, especially around governance events, fee-switch proposals, or DEX-flow rotations. Re-test on your own venue using venue-specific commission and slippage. Demo-trade for at least one month before any live deployment. Past performance is not indicative of future results.
Parameter Adjustments: Commission defaults to 0.10% (Bybit spot taker). Adjust for your venue — Binance Spot ~0.10%, Coinbase Advanced ~0.50%, OKX Spot ~0.08%. The grid range and level count should be re-evaluated for each new deployment period — UNI's "fair range" shifts over time, and a grid calibrated for one regime may not work for the next.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:UNIUSDT (Uniswap / Tether Spot). Strategy is generic — works on any spot pair with sufficient depth and structural range.
Timeframe: 15m chart (mandatory — strategy is calibrated for this TF).
Test Period: Jan 19, 2026 — May 19, 2026 (≈ 4 months / last 120 days).
Initial Capital: 11,000 USDT (10,000 investment + 1,000 buffer for commission and grid fluctuations).
Order Size per Trade: 175.44 USDT per grid level. Total investment envelope = 10,000 USDT (57 levels × 175.44). Maximum simultaneous position count: 57 levels.
Commission: 0.10% taker — Bybit spot reference; adjust for your venue.
Slippage: 2 ticks — typical taker execution on liquid UNI/USDT pairs.
Margin for Long and Short Positions: 100% (1× leverage assumed; no margin amplification).
Indicator Settings: Default Configuration.
Grid Mode: Geometric
High Price: 4.171
Low Price: 2.979
Levels: 57
Amount per Level: 175.44 USDT
Trailing Up: disabled
Step (computed): ≈ 0.61%
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit:
Max Drawdown:
Total Closed Trades:
Percent Profitable:
Profit Factor:
Average Trade:
Average # Bars in Trades:
Reference PulseWire Pine backtest on BYBIT:UNIUSDT (15m chart), Jan 19 2026 — May 19 2026 (≈4 months / last 120 days at time of publication). The reference period captures UNI's choppy post-recovery phase, which is structurally favorable for static range grids — the strategy fills repeatedly as price oscillates through the band. Built-in GRID Bot backtest reference (last 120 days): +23.15% net profit / 1,290 trades. The Pine simulation differs slightly from the bot backtester due to fee structure, slippage model, and close-based level-crossing detection vs. exchange-side limit orders. Re-test on your own venue with venue-specific commission before live deployment.
🔷 How to Use It:
🔸 Adjust Settings: Set the grid High and Low boundaries based on UNI's observed range over the past 1–3 months. The default 2.979 — 4.171 envelope reflects UNI's recent volatility band. Amount per level should be sized so that filling the entire ladder (all 57 levels = 10,000 USDT exposure) does not exceed your risk budget. Scale linearly to your equity. Always confirm you are on a 15-minute chart — the runtime warning label flags mismatches.
🔸 Results Review: Verify Maximum Drawdown stays within your personal risk budget. The strategy operates with no stop loss, so the worst-case is the full grid being filled at the Low boundary while price continues lower. Calculate this scenario before going live: if every level fills and price drops 10% below the grid Low, what is your unrealized loss? That is your hard floor. Re-test on your own venue with realistic commission and slippage.
🔸 Create alerts to trigger the connected bot: The strategy exposes a "grid_start" alert that fires once when the first bar enters the configured backtest window. Configure the alert in PulseWire with the webhook URL pointing to your bot's signal endpoint. The Bot ID, Email Token, and Pair label can be set in the script's inputs. Note that grid bots are typically configured directly within the bot interface, so this alert is primarily informational for monitoring purposes.
🔷 INDICATOR SETTINGS
Grid High Price — Upper boundary of the grid range.
Grid Low Price — Lower boundary of the grid range.
Grid Levels — Total number of price levels between Low and High (default 57).
Grid Mode — Distribution of levels: Geometric (constant % spacing) or Arithmetic (constant absolute spacing).
Amount per Level (USDT) — Notional value of each buy fill.
Total Investment (USDT, ref) — Reference total capital deployed across all levels (informational).
Trailing Up — Disabled by default; enable to make grid shift up on breakout (turns this into adaptive grid behavior).
Trail Up Threshold % — Percentage above High at which trailing-up triggers (only used if Trailing Up enabled).
Shift Up Magnitude % — How much of the current range to shift when trailing-up fires (only used if Trailing Up enabled).
Limit by Date Range — Constrain backtest to a specific date window.
Show grid lines on chart — Toggle visual display of all level lines.
Recommended TF (for warning) — Timeframe baseline for the runtime mismatch warning (default 15m).
Stats card / Watermark — Display layer controls for on-chart backtest summary and branding.
Webhook — Bot ID, Email Token, and Pair label for connected bot signal routing.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
[3Commas] Ether Vault Grid - Indicator Ether Vault Grid — ETH — Indicator
🔷 What it does:
This indicator visualizes a static geometric grid trading system for Ethereum, designed to capture range-bound oscillations between a configurable High and Low price boundary. It pre-computes 28 price levels using geometric spacing (≈ 1.23% step), tracks a virtual deal lifecycle as price crosses through levels, and displays a live on-chart stats card with virtual P&L, drawdown, fill count, win rate, and profit factor. Unlike adaptive grid variants with trailing logic, this version stays locked to the original range — no auto-shift up or down. Webhook-ready alerts are exposed for integration with an external grid bot. No orders are placed by the indicator itself — it is a pure signal and visualization layer.
- 28 geometrically-spaced levels rendered as horizontal lines on chart
- Buy / Sell event labels on every close-cross through a grid level
- Static range — grid does NOT shift on price breakout (trailing disabled by default)
- Virtual P&L tracker matching the Strategy version's accounting
- Stats card displaying Grid Fills, Win Rate, Profit Factor live on chart
🔷 Who is it for:
Swing traders who identify ranging conditions on Ethereum and want a visual grid overlay.
Bot operators who automate grid execution through webhook integration with a connected bot.
Free-tier PulseWire users who want access to the same grid logic as the Strategy version without requiring backtest functionality.
Spot accumulators with a directional view that ETH will remain inside the configured boundaries.
🔷 How does it work:
Long Entry Signal: When close crosses down through an unfilled grid level, the indicator marks a Buy fill at that level with a small label on chart. The level becomes "filled" in the virtual deal state, recording the buy price and quantity for later P&L calculation.
Short Entry: Not used — long-only grid visualizer.
Exit Management: For each filled level, when close crosses up through the next level above, the indicator marks a Sell fill at that target. The virtual P&L for that grid round-trip is computed as (sellLvl − buyLvl) × qty and added to the running stats. The level is reopened for another buy.
Static range — by default the grid does NOT shift when price exits the boundary. The Trailing Up toggle is provided in inputs for users who want to switch to adaptive mode, but the default static behavior produces a predictable risk envelope: if price breaks above High the grid idles; if it breaks below Low all 28 levels fill and accumulate unrealized loss until reversal.
🔷 Why it's unique:
Pure static range visualization — most grid indicators include trailing logic that compromises the original risk envelope. This variant stays locked to the configured range by default, giving traders a clear visual of the exact worst-case scenario. The trailing toggle is available as an opt-in if needed.
Calibrated for ETH volatility — the 1.23% step and 28-level ladder are wider and sparser than micro-priced altcoin grids (which use ~0.6% step and 56 levels). This matches ETH's larger absolute moves and lower noise — fills are less frequent but each captures meaningful spread, which suits a swing-trading time horizon rather than scalping.
Bot Integration — entry alerts ship with webhook-ready JSON payloads. The grid_start alert fires on first activation; Bot ID, Email Token, and pair label are exposed as inputs.
🔷 What you'll see on the chart:
Red line (top) — Grid High boundary (2258.88 default)
Green line (bottom) — Grid Low boundary (1625.56 default)
Aqua lines (middle) — All 26 intermediate grid levels
Aqua "Buy L_X" label — Close crossed down through level X, virtual buy placed
Fuchsia "Sell L_X +N.NN" label — Close crossed up through level X+1, virtual sell with realized P&L
Stats card (top-left, configurable) — Live virtual results: Net P&L, Max Drawdown, Grid Fills, Win Rate, Profit Factor
Orange warning label — Appears if chart is on a timeframe other than the recommended 15m
Watermark (top-right, configurable) — Optional brand text overlay for screenshots
🔷 Considerations Before Using the Indicator:
Market & Timeframe: This indicator is calibrated for a 15-minute chart on ETH/USDT spot pairs. Fill density and overall virtual P&L depend directly on how often close crosses grid levels. Higher timeframes (1h+) will show far fewer fills; lower timeframes (1m, 5m) increase fills but slow chart performance. The runtime warning label flags any TF other than 15m so you always know whether the displayed stats are comparable to the canonical Strategy version reference.
Limitations: The indicator does not place orders. It tracks a "virtual deal" state on chart for visualization purposes only — actual execution must be done through a connected bot or manually. The strategy carries no stop loss; if price breaks below the grid's Low boundary, all filled levels accumulate unrealized loss in the virtual tracker until either the average is recovered through subsequent bounces or the user manually closes positions. Sustained one-way trends (especially downtrends) will produce maximum drawdown without the trailing-up feature triggering.
Virtual P&L Accuracy: The on-chart stats card uses a simplified internal accounting model — it does not factor exchange commission or slippage. Realized profit is computed as the raw (sellLvl − buyLvl) × qty. Use the Strategy version for fee-adjusted backtest results.
Backtesting & Demo Testing: Always validate the grid range and step size on historical data for the specific instrument. ETH's volatility profile shifts across market cycles — what was a ranging instrument can become a strong-trend instrument and vice versa. The companion Strategy version of this script is available on the same profile for full backtest analysis with realistic commissions and slippage.
Parameter Adjustments: Grid range (High/Low) and level count should be re-evaluated for each new deployment period. ETH's "fair range" shifts over time, and a grid calibrated for one regime may not work for the next. Trail-up threshold and shift magnitude (if enabled) control how aggressively the grid follows trends — increase threshold for less responsive grids, decrease for more reactive ones.
🔷 Backtest Validation:
This indicator shares identical grid logic with the Strategy version of the same framework, available on this profile for full historical performance review with realistic commission and slippage:
Strategy version:
Reference results from the Strategy version on BYBIT:ETHUSDT (Spot), 15m chart, tested period Jan 17 — May 17, 2026 (≈4 months / last 120 days):
Net Profit: +677.04 USDT (+11.28%) | Max Drawdown: 431.16 USDT (7.14%) | Total Trades: 367 | Win Rate: 63.49% (233 / 367) | Profit Factor: 2.49
The reference window captures ETH's ranging-to-mildly-recovering phase after the early-2026 drawdown — the structurally favorable regime for static range grids where price oscillates repeatedly through the band. 3Commas built-in backtest reference (last 120 days): +10.09% before optimization, +13.23% after optimization. Refer to the Strategy publication for the complete equity curve and trade-by-trade breakdown.
🔷 How to Use It:
🔸 Adjust Settings: Set the grid High and Low boundaries based on ETH's observed range over the past 1–3 months. The default 1625.56 — 2258.88 envelope reflects ETH's recent volatility band. The amount per level should be sized so that filling the entire ladder (all 28 levels = 5,000 USDT exposure) does not exceed your risk budget. Always confirm you are on a 15-minute chart.
🔸 Visual Confirmation: Use the on-chart grid lines and Buy/Sell labels to verify that the active virtual deal aligns with your bot's actual position. The indicator's virtual deal state is a 1-to-1 mirror of the Strategy version's grid logic (minus commission), so any major divergence between chart visuals and bot position is a flag for investigation. Pay particular attention to the Max Drawdown value in the stats card — for a static grid this can grow when price breaks the Low boundary.
🔸 Create alerts to trigger the connected bot: The indicator exposes a "grid_start" alert that fires once when the first bar enters the configured backtest window. Configure the alert in PulseWire with the webhook URL pointing to your bot's signal endpoint. The Bot ID, Email Token, and Pair label can be set in the script's inputs. Note that grid bots are typically configured directly within the bot interface, so this alert is primarily informational for monitoring purposes.
🔷 INDICATOR SETTINGS
Grid High Price — Upper boundary of the grid range.
Grid Low Price — Lower boundary of the grid range.
Grid Levels — Total number of price levels between Low and High (default 28).
Grid Mode — Distribution of levels: Geometric (constant % spacing) or Arithmetic (constant absolute spacing).
Amount per Level (USDT, ref) — Reference notional for virtual P&L calculation.
Trailing Up — Disabled by default; enable to make grid shift on breakout (turns this into adaptive grid behavior).
Trail Up Threshold % — Percentage above High at which trailing-up triggers (only used if Trailing Up enabled).
Shift Up Magnitude % — How much of the current range to shift when trailing-up fires (only used if Trailing Up enabled).
Limit by Date Range — Constrain virtual backtest to a specific date window.
Initial Capital (ref for % calc) — Reference capital base for percentage metrics in the stats card.
Show grid lines on chart — Toggle visual display of all level lines.
Show fill labels on chart — Toggle Buy / Sell event labels.
Recommended TF (for warning) — Timeframe baseline for the runtime mismatch warning (default 15m).
Stats card / Watermark — Display layer controls for on-chart virtual backtest summary and branding.
Webhook — Bot ID, Email Token, and Pair label for connected bot signal routing.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Indicator
[3Commas] Ether Vault Grid - ETH/USDT Ether Vault Grid — ETH/USDT
🔷 What it does:
This strategy implements a static geometric grid trading system for Ethereum, designed to capture range-bound oscillations between a configurable High and Low price boundary. It pre-computes 28 price levels using geometric spacing (≈ 1.23% step), buys at each level on close-cross-down, and sells at the next level up on close-cross-up. Unlike adaptive grid variants with trailing logic, this version stays locked to the original range — no auto-shift up or down. Profit comes from capturing the spread between adjacent grid lines on every oscillation; the structure is designed for periods where ETH consolidates within a defined band rather than trending strongly in one direction.
- 28 geometrically-spaced levels between Low (1625.56) and High (2258.88)
- Buy on close-cross-down through an unfilled level; sell on close-cross-up through the next level
- Fixed notional per level (178.57 USDT default), all fills equally sized
- No trailing up — grid stays locked to the configured range
- No stop loss — positions held until matching sell level is hit
🔷 Who is it for:
Swing traders who identify ranging conditions on Ethereum and want to monetize the oscillations.
Bot operators who automate grid execution through webhook integration with a connected bot.
Spot accumulators with a directional view that ETH will remain inside the configured boundaries during the deployment period.
Risk-conscious participants who prefer predictable accumulation envelopes (capped at full-grid-filled at the Low boundary).
🔷 How does it work:
Long Entry: When close crosses down through an unfilled grid level, the strategy opens a long position sized to the per-level notional amount (default 178.57 USDT). Each level operates independently — multiple buys can stack across the ladder simultaneously during a downward swing, creating a structured accumulation pattern.
Short Entry: Not used — this is a long-only spot grid.
Exit Management: For each filled level, the strategy places a limit exit at the next level up. When close crosses up through that target, the position closes and the level becomes available to buy again. No stop loss is used; the grid's Low boundary defines the structural worst-case accumulation point.
Static range — the grid does NOT shift when price exits the boundary. If price breaks above High, the strategy stops opening new buys until price returns inside the band. If price breaks below Low, all 28 levels are filled and the position holds unrealized loss until either the average is recovered or the user manually closes.
🔷 Why it's unique:
Pure static range design — most grid implementations include trailing-up logic that compromises the original risk envelope when price trends. This variant stays locked to the configured range, which gives a fully predictable worst-case scenario: maximum unrealized loss is bounded by (Current Price − Grid Low) × Total Position at Low. Traders know exactly what they are signing up for before deploying capital.
Calibrated for ETH volatility — the 1.23% step and 28-level ladder are wider and sparser than micro-priced altcoin grids (which use ~0.6% step and 56 levels). This matches ETH's larger absolute moves and lower noise — fills are less frequent but each captures meaningful spread, which suits a swing-trading time horizon rather than scalping.
Bot Integration — entry alerts ship with webhook-ready JSON payloads. The grid_start alert fires once on first activation. Bot ID, Email Token, and pair label are exposed as inputs.
🔷 Considerations Before Using the Indicator:
Market & Timeframe: This strategy is calibrated for a 15-minute chart on ETH/USDT spot pairs with active intraday range. Fill density depends directly on how often close crosses grid levels. Higher timeframes (1h+) produce far fewer fills; lower timeframes (1m, 5m) generate more fills but slow backtests on PulseWire's plan limits. The runtime warning label flags any TF other than 15m.
Limitations: No stop loss and no trailing range adjustment. The strategy is structurally exposed to two failure modes:
(1) Price breaks above High — strategy idles, no new fills until reversal back into range
(2) Price breaks below Low — all 28 levels fill, unrealized loss accumulates until average is recovered or position is manually closed
This is the trade-off of a pure static grid: predictable risk envelope, but no adaptive protection against trend breakouts. Pair this strategy with manual range validation and an exit plan before deploying capital.
Backtesting & Demo Testing: Always validate the grid range and step size on historical data for the specific instrument. ETH's volatility profile shifts across market cycles — what was a ranging instrument can become a strong-trend instrument and vice versa. Re-test on your own venue using venue-specific commission and slippage. Demo-trade for at least one month before any live deployment. Past performance is not indicative of future results.
Parameter Adjustments: Commission defaults to 0.10% (Bybit spot taker). Adjust for your venue — Binance Spot ~0.10%, Coinbase Advanced ~0.50%, OKX Spot ~0.08%. The grid range and level count should be re-evaluated for each new deployment period — ETH's "fair range" shifts over time, and a grid calibrated for one regime may not work for the next.
🔷 STRATEGY PROPERTIES
Symbol: BYBIT:ETHUSDT (Ethereum / Tether Spot). Strategy is generic — works on any spot pair with sufficient depth and structural range.
Timeframe: 15m chart (mandatory — strategy is calibrated for this TF).
Test Period: Jan 17, 2026 — May 18, 2026 (≈ 4 months / last 120 days).
Initial Capital: 6,000 USDT (5,000 investment + 1,000 buffer for commission and grid fluctuations).
Order Size per Trade: 178.57 USDT per grid level. Total investment envelope = 5,000 USDT (28 levels × 178.57). Maximum simultaneous position count: 28 levels.
Commission: 0.10% taker — Bybit spot reference; adjust for your venue.
Slippage: 2 ticks — typical taker execution on liquid ETH/USDT pairs.
Margin for Long and Short Positions: 100% (1× leverage assumed; no margin amplification).
Indicator Settings: Default Configuration.
Grid Mode: Geometric
High Price: 2258.88
Low Price: 1625.56
Levels: 28
Amount per Level: 178.57 USDT
Trailing Up: disabled
Step (computed): ≈ 1.23%
Strategy: Long Only.
🔷 STRATEGY RESULTS
⚠️ Remember, past results do not guarantee future performance.
Net Profit: +655.01 USDT (+10.92%)
Max Drawdown: 431.16 USDT (7.14%)
Total Closed Trades: 367
Percent Profitable: 63.49% (233 / 367)
Profit Factor: 2.488
Reference PulseWire Pine backtest on BYBIT:ETHUSDT (15m chart), Jan 17 2026 — May 18 2026 (≈4 months / last 120 days at time of publication). The reference period captures ETH's ranging-to-mildly-recovering phase after the early-2026 drawdown, which is structurally favorable for static range grids — the strategy fills repeatedly as price oscillates through the band. 3Commas built-in backtest reference (last 120 days): +10.09% before optimization, +13.23% after optimization. The Pine simulation differs slightly from 3Commas due to fee structure, slippage model, and close-based level-crossing detection vs. exchange-side limit orders. Re-test on your own venue with venue-specific commission before live deployment.
🔷 How to Use It:
🔸 Adjust Settings: Set the grid High and Low boundaries based on ETH's observed range over the past 1–3 months. The default 1625.56 — 2258.88 envelope reflects ETH's recent volatility band. Amount per level should be sized so that filling the entire ladder (all 28 levels = 5,000 USDT exposure) does not exceed your risk budget. Scale linearly to your equity. Always confirm you are on a 15-minute chart — the runtime warning label flags mismatches.
🔸 Results Review: Verify Maximum Drawdown stays within your personal risk budget. The strategy operates with no stop loss, so the worst-case is the full grid being filled at the Low boundary while price continues lower. Calculate this scenario before going live: if every level fills and price drops 10% below the grid Low, what is your unrealized loss? That is your hard floor. Re-test on your own venue with realistic commission and slippage.
🔸 Create alerts to trigger the connected bot: The strategy exposes a "grid_start" alert that fires once when the first bar enters the configured backtest window. Configure the alert in PulseWire with the webhook URL pointing to your bot's signal endpoint. The Bot ID, Email Token, and Pair label can be set in the script's inputs. Note that grid bots are typically configured directly within the bot interface, so this alert is primarily informational for monitoring purposes.
🔷 INDICATOR SETTINGS
Grid High Price — Upper boundary of the grid range.
Grid Low Price — Lower boundary of the grid range.
Grid Levels — Total number of price levels between Low and High (default 28).
Grid Mode — Distribution of levels: Geometric (constant % spacing) or Arithmetic (constant absolute spacing).
Amount per Level (USDT) — Notional value of each buy fill.
Total Investment (USDT, ref) — Reference total capital deployed across all levels (informational).
Trailing Up — Disabled by default; enable to make grid shift up on breakout (turns this into adaptive grid behavior).
Trail Up Threshold % — Percentage above High at which trailing-up triggers (only used if Trailing Up enabled).
Shift Up Magnitude % — How much of the current range to shift when trailing-up fires (only used if Trailing Up enabled).
Limit by Date Range — Constrain backtest to a specific date window.
Show grid lines on chart — Toggle visual display of all level lines.
Recommended TF (for warning) — Timeframe baseline for the runtime mismatch warning (default 15m).
Stats card / Watermark — Display layer controls for on-chart backtest summary and branding.
Webhook — Bot ID, Email Token, and Pair label for connected bot signal routing.
👨🏻💻💭 We hope this tool helps enhance your trading. Your feedback is invaluable, so feel free to share any suggestions for improvements or new features you'd like to see implemented.
__
The information and publications within the 3Commas PulseWire account are not meant to be and do not constitute financial, investment, trading, or other types of advice or recommendations supplied or endorsed by 3Commas and any of the parties acting on behalf of 3Commas, including its employees, contractors, ambassadors, etc. Strategy
Pythagorean Time Price Geometry Ver 1.0Pythagorean Time Price Geometry — Ver 1.0
By Timepricedecoder
Overview
This indicator applies W.D. Gann's Time = Price principle using Pythagorean geometry to project natural time cycles and price grid levels directly on the chart.
Gann believed that financial markets move in geometric harmony — that price and time are not independent variables, but two sides of the same equation. When they balance, the market reaches a natural turning point.
This script operationalises that idea using the Pythagorean theorem — the ancient mathematical relationship where in a right-angled triangle, the square of the hypotenuse equals the sum of squares of the other two sides (a² + b² = c²). In market terms:
Side A (time) — the number of bars in the anchor swing
Side B (price) — the range of the anchor swing (High − Low)
Side C (hypotenuse) — the natural cycle projection derived from both
By selecting a Pythagorean Triple (sets of whole numbers satisfying a² + b² = c², such as 3-4-5, 5-12-13, 8-15-17), the script scales the time-price relationship into a precise geometric ratio. This ratio then defines the grid cell size, the cycle length, and the angle of the diagonal — all derived from a single anchor swing.
The result is a self-organising grid that maps where price should find support or resistance, and when time cycles are due to complete — giving the trader a structured, geometry-based framework rather than arbitrary indicator levels.
When time and price arrive at the same Pythagorean node simultaneously — the market is squaring — and that is where the highest-probability signals are generated.
Core Concepts
Time = Price Squaring
Price range and time duration are treated as the two legs of a right triangle. When they balance — the market is at a Square — reversals or accelerations are most likely.
Pythagorean Nodes
From the anchor swing (High → Low or Low → High), the script calculates:
Sq — Square of the swing (time leg = price leg). Highest grade signal
Hyp — Hypotenuse projection. Major cycle marker
½Hyp — Half Hypotenuse. Minor cycle node
½Sq — Early warning zone
These project forward as repeating time cycles across the chart.
Harmonic Grid
Price is divided into cells derived from the Pythagorean triple ratio (B/A × Range). The grid repeats both in time (columns) and price (rows), creating a natural map of support, resistance, and time confluence.
Signal Tiers
🟨 BUY/SELL-Sq — Time node + Price grid level align. Strongest signal
🟩 BUY/SELL-T — Time node only. Moderate signal
⬜ BUY/SELL-P — Price grid level only. Weakest, disabled by default
Confluence Zones ⚡
⚡ — Quarter cycle node
⚡⚡ — Half cycle node
⚡⚡⚡ — Full cycle node (highest confluence)
Recommended Settings
StyleGann NumberDivisorTripleSwing WidthScalping221/44-3-5NarrowShort Term441/24-3-5NormalMedium Term881/23-4-5NormalLong Term176Full3-4-5Wide
InstrumentType SettingNotesOptionsOptionsGrid origin auto-adjustedIndicesIndicesUse 88, 1/2 divisorStocksStocksUse Adaptive stabilityFuturesFuturesUse 44 or 88
Grid Stability
Strict — Anchors rarely shift. Best for trending markets
Adaptive — Default. Balances stability and responsiveness
Relaxed — Reanchors more freely. Best for ranging markets
How To Use
Let the script auto-detect the swing anchor (or set manually)
Watch for Sq labels on vertical cycle lines — these are key dates
Enter on BUY-Sq / SELL-Sq signals with candle confirmation
Use ⚡⚡⚡ confluence zones as high-alert turning point windows
The active zone box shows current grid cell position (Upper = bullish bias, Lower = bearish bias)
Disclaimer
This script is published for educational purposes only. It does not constitute financial advice. Past signal accuracy does not guarantee future results. The swing detection uses Daily OHLC data with lookahead enabled — results may differ slightly on live bars versus historical bars. Always use proper risk management. Trade at your own risk. Indicator
Indicator
Round Number Scale📌 A clean round-number scale that adapts to your chart, your zoom, and your market.
▌WHY IT'S USEFUL
Round numbers matter.
They often act as visual anchors for price reading, execution planning, reaction zones, and overall chart structure. But the native price scale does not always make these levels obvious enough, especially when you zoom in, zoom out, switch timeframes, or work on instruments with very different price behaviors.
This indicator builds a dedicated round-number scale directly on the chart and automatically adapts its density to the visible range, so the display stays readable instead of becoming overcrowded or too sparse.
It is designed to help you read price structure faster, keep important psychological levels visible, and maintain a cleaner visual framework across multiple chart conditions.
▌QUICK START
1. Add the indicator to your chart.
2. If the scale seems hidden, right-click the indicator name.
3. Go to Visual order → Bring to front.
4. Choose whether the scale is displayed on the left or right side.
5. Adjust the Size and Offset settings if you want a wider, tighter, or shifted display.
6. Optionally enable short numbers, labels, ruled lines, or a different visual theme.
▌MAIN SETTINGS
• Scale
Choose the side of the chart, the visual theme, the wall size, and the horizontal offset.
• Labels
Show or hide labels, increase or reduce their size, and switch to short number formatting such as 1K / 1M / 1B.
• Lines
Show or hide grid lines, adjust line thickness, and enable ruled lines for a lighter alternating visual structure.
• Themes
The indicator includes multiple visual styles and automatically adapts to the chart background for better contrast.
▌HOW IT WORKS
The script detects the currently visible chart window and computes an adaptive round-number grid based on the instrument, the timeframe, and the visible price range.
It then:
- builds a dedicated side scale,
- selects visible round-number levels,
- highlights the strongest levels,
- draws matching horizontal guide lines on the chart,
- and filters label density automatically to keep the display readable.
On lower timeframes, it can also display finer subdivisions of the round-number structure when relevant.
▌WARNINGS & LIMITS
If the scale is not visible, this is usually only a display-order issue:
Visual order → Bring to front.
The indicator automatically adjusts round-number density to the visible chart range, but no fully dynamic layout can be perfect in every possible situation.
In particular, adaptation may be less precise when combining:
- very high timeframes,
- very large historical ranges,
- strong volatility,
- or logarithmic scaling.
If needed, try one of the following:
- switch back to a linear scale,
- zoom slightly in or out,
- use a lower timeframe,
- adjust the Scale size parameter.
This indicator is mainly designed as a visual chart-reading tool. It does not generate trading signals or alerts by itself. Indicator
