Session Value Ribbon [EXCAVO]Anchored volume-weighted mean with a harmonic value ribbon and HTF confluence
The Session Value Ribbon plots a volume-weighted mean of price and a volatility-scaled sigma envelope, then partitions the space between them into a harmonic value ribbon (0.236, 0.382, 0.5, 0.618, 0.786). Three anchor modes let the wave adapt to any chart: Rolling (a sliding N-bar window, default), Timeframe (classical anchored VWAP that resets each session), and Date (fixed anchor). A second accumulator on a slower reference timeframe runs the same math and plots as an HTF confluence line for multi-scale reads.
This is not a basic VWAP indicator. The ribbon layers, the volatility-regime scaling of the sigma bands, the HTF confluence overlay, and the auto-resolver that picks the anchor from the chart timeframe turn a single-line mean into a full value map of the current session.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ HOW TO USE
Step 1 → Add the indicator. The anchored mean, sigma envelope
and value ribbon draw immediately on whatever anchor
mode is selected (Rolling by default).
Step 2 → Read the mean as fair value for the active anchor.
Price above the mean = participants are bidding higher
than the anchor-window average; price below = lower.
Step 3 → Watch the outer sigma bands. A close beyond them
means price is stretched from fair value; the ribbon
layers below act as pullback shelves.
Step 4 → Use ribbon layers as intraday shelves. The 0.5 layer
is the midpoint between mean and outer band; the 0.236
layer sits close to the mean; the 0.786 layer sits
close to the outer band. Look for stalls and false
breaks at each layer.
Step 5 → Cross-check with the HTF confluence line. When the
primary mean and the HTF mean converge, price is in a
multi-scale value zone; when they diverge, one session
is running ahead of the other.
Step 6 → Read the dashboard for anchor mode, current mean,
distance from mean in sigmas, slope regime and bar
count since the anchor.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ HOW IT CALCULATES
◆ Volume-Weighted Mean
The mean is a running weighted average of the selected price source. Weights come from volume with three modes: Full uses raw volume (classical MIDAS weighting), Root uses the square root of volume (dampens single-bar spikes so one huge candle cannot drag the mean), and None uses equal weight (the mean degenerates to a plain arithmetic average of the source).
◆ Anchor Modes
Rolling accumulates over a sliding N-bar window (default 200 bars), so the wave is always N bars long regardless of chart timeframe. Timeframe resets the accumulator on each boundary of the chosen anchor timeframe (Daily by default), matching the behaviour of a classical anchored VWAP. Date locks the anchor to a specific timestamp and keeps accumulating forever after.
◆ Sigma Envelope
Sigma is computed from the anchor-window weighted variance, E − (E )². The outer bands are drawn at ±sigmaMultiplier × sigma around the mean. Optional Volatility Regime Adjust multiplies sigma by an ATR-relative factor, bounded between 0.7x and 1.4x, so the bands breathe with the current activity state, giving tighter bands in quiet regimes and wider bands in wild ones.
◆ Harmonic Value Ribbon
The space between the mean and each outer band is split into harmonic layers at 0.236, 0.382, 0.5, 0.618 and 0.786 of the sigma distance. The ribbon is rendered as a progressive-opacity fill, not as separate labelled lines, so the eye reads a continuous value gradient instead of a stack of horizontal ledger lines.
◆ HTF Confluence Layer
A second accumulator runs the exact same math on the next slower anchor timeframe (Rolling with a longer window when the primary is Rolling; the next-slower TF step when the primary is Timeframe). The HTF mean plots as a thin coloured line. When the primary mean and the HTF mean align, price is in a multi-scale value zone.
◆ Slope-Based Regime Classifier
The classifier measures the slope of the primary mean over the slope-lookback window and normalises it by ATR. If |slope|/ATR exceeds the slope threshold (default 0.05 xATR), the ribbon and mean tint bull or bear. Below the threshold the regime is flat and the palette stays neutral.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ WHAT MAKES IT DIFFERENT
◆ Chart-Timeframe Auto-Resolver
The anchor timeframe is resolved automatically from the chart timeframe, so the wave shape stays consistent across intraday, swing and position TFs without manual tuning.
◆ Volatility-Regime Scaling
The sigma envelope adapts to activity state instead of being fixed at a static multiplier. Tight regimes contract the bands, wild regimes widen them, with a bounded 0.7x to 1.4x multiplier so the visual stays stable.
◆ Harmonic Ribbon as Progressive Fill
The intra-band space is drawn as a smooth value gradient rather than a stack of horizontal lines. Layer count is user-selectable (Harmonic 3, 5 or 7).
◆ HTF Confluence Overlay
A second anchored mean on the next slower timeframe plots as a companion line so multi-scale value alignment is visible without a second indicator on the chart.
◆ Distance-In-Sigma Readout
A right-edge readout reports the current mean and the current distance from mean in sigmas, so the extreme readings are legible without measuring.
◆ EXCAVO Overlay Visual
Chart-anchored overlay only, with no pane oscillator and no floating badges. The wave, ribbon and HTF line share a single tonal palette that stays out of the way of price action.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ DASHBOARD
Real-time panel (top right by default) with all key metrics:
Anchor - active anchor mode with its parameter (Rolling N, Timeframe TF, or Date)
Mean - current value of the anchored mean
Distance - price distance from mean in sigmas, signed
Regime - Up / Down / Flat classification from the slope-based regime engine
Bars in Anchor - bar count since the anchor started accumulating
Legend table (bottom left) explains every glyph and colour used on the chart. Toggle in Dashboard settings.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ SETTINGS
Anchor
Anchor Mode - Rolling (default), Timeframe, or Date
Rolling Length (bars) - 200 (window used in Rolling mode)
Anchor Timeframe - D (used in Timeframe mode)
Anchor Date - 01 Jan 2025 (used in Date mode)
Source
Price Source - (H+L+C)/3 (typical price)
Volume Weight - Full (raw volume) - Root (square root of volume) - None (equal weight)
Sigma Bands
Sigma Multiplier - 2.0 (band distance in sigmas)
Volatility Regime Adjust - OFF (ATR-scaled sigma with 0.7x-1.4x bounds)
Value Ribbon
Show Value Ribbon - ON
Ribbon Set - Harmonic 5 (0.236 / 0.382 / 0.5 / 0.618 / 0.786)
Ribbon Opacity Base - 80
Show Zone Fill - ON
Zone Fill Opacity - 88
HTF Confluence
Enable HTF Confluence - ON (draws a second mean from the next slower anchor)
Regime Coloring
Slope Regime Coloring - ON
Slope Lookback - 20 bars
Slope Threshold (xATR) - 0.05
Visualization
Bull Color - deep blue
Bear Color - red
Flat Color - neutral grey
HTF Confluence Color - amber
Show Right-Edge Readout - ON
Dashboard
Show Dashboard - ON
Dashboard Position - Top Right
Show Legend - ON
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
▸ ALERTS
Directional alerts only.
Price Crossed Above Anchored Mean - close crosses over the primary anchored mean
Price Crossed Below Anchored Mean - close crosses under the primary anchored mean
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Built on MIDAS anchored VWAP (Paul Levine, 1990s), extended with three anchor modes (Rolling / Timeframe / Date), selectable volume weighting, volatility-regime scaling of the sigma bands, a harmonic ribbon rendered as a progressive-opacity fill, an HTF confluence layer, a slope-based regime classifier, and a right-edge distance-in-sigma readout.
Best regards,
EXCAVO
Disclaimer
Trading involves significant risk. This indicator is a technical analysis tool
and does not constitute financial advice, investment recommendations, or a
guarantee of future results. Past indicator behavior does not guarantee future
performance. Always use proper risk management and your own judgment.
Indicator
xKen-t COT Index & Extremes (Native)Overview
COT Index & Extremes (Native) turns Commitments of Traders positioning into a single, decision-ready sentiment reading. It fetches CFTC COT data directly, converts a chosen trader group's net position into a 0–100 index that shows where current positioning sits within its own historical range, and flags when that positioning reaches a bullish or bearish extreme. The goal is to replace "eyeballing" raw COT lines with a defined, repeatable number.
The concept behind it
Raw COT net positions are hard to act on because "a lot" or "a little" only means something relative to an asset's own history. This script applies a position-in-range normalization (in the spirit of a Williams %R calculation, but applied to positioning rather than price): it takes the selected group's net position (long minus short) and measures where today's value falls between its lowest and highest readings over a lookback window, scaled 0–100. A reading near 100 means positioning is at the top of its historical range; near 0, the bottom. Two windows are used together — a short (26-week) read for the current swing in sentiment and a long (~3-year, 156-week) read for the structural picture.
Extremes are then defined mechanically: at or above 80 = an extreme in that group's positioning (bullish bias for commercials), at or below 20 = the opposite extreme (bearish bias). This makes "extreme" a number you can journal and alert on, not a subjective judgment.
What it does
- Fetches CFTC COT data natively and auto-resolves the correct futures contract from the chart's symbol — no need to wire in another indicator as a data source.
- Builds the net position for the selected trader group and normalizes it to the 0–100 index (short and long lookbacks).
- Marks the bullish/bearish extreme threshold zones and states a plain bias: BULLISH, BEARISH, or NO EDGE.
- Lets you switch between Commercial, Non-Commercial, and Retail (non-reportable) groups. Note these read differently — commercial hedgers are commonly used as a contrarian ("smart money") read at extremes, while non-commercials and retail are the crowd typically faded at extremes.
- Fires alerts when the index crosses into a bullish or bearish extreme.
When a symbol has no CFTC data (cash indices, most single stocks, crypto, exotic crosses), it clearly states "NO COT — use the futures symbol" and prompts you, instead of silently plotting a misleading line off price.
- Displays a panel confirming the resolved CFTC code, the active trader group, and whether the chart is on the correct (weekly) timeframe.
What's original here
Most COT tools plot raw net positions or require you to wire in another indicator's data. This one is self-contained and reframes the data for decision-making through three things: (1) it fetches CFTC Commitment of Traders data natively via PulseWire's COT library and auto-resolves the correct contract from the chart's futures symbol, so no source-wiring is needed; (2) it converts a chosen trader group's net position (long − short) into a 0–100 "position-in-range" index — a Williams-style normalization showing where current positioning sits within its own historical range over a short (26w) and long (~3y) lookback — so an "extreme" becomes a defined number (≥80 / ≤20) instead of a visual guess; and (3) it switches cleanly between Commercial, Non-Commercial, and Retail groups and states a plain bullish/bearish/neutral bias from the index. When a symbol has no CFTC data (cash indices, most stocks, exotic crosses) it says so and prompts for the futures symbol, rather than silently plotting noise. A panel confirms the resolved CFTC code, the group, and whether you're on the correct weekly timeframe.
How to use it
1. Open a weekly chart of the futures symbol (e.g. 6E1!, GC1!, DX1!, ES1!, 6N1!) — not the cash index or spot pair. COT is weekly data, and the lookbacks are counted in weekly bars.
2. Read the index and bias. ≥80 = bullish extreme, ≤20 = bearish extreme, mid-range = no positioning edge.
3. Use it as directional context, confirmed by your own entry method, levels, and risk management.
4. If the panel shows no code, enter the 6-digit CFTC code manually in settings, or switch to the contract's futures symbol.
Inputs
Trader group (Commercial / Non-Commercial / Retail) · optional CFTC code override · include-options toggle · short and long lookbacks · bullish/bearish thresholds · display and shading options.
Attribution
COT data access uses PulseWire's official LibraryCOT. This script's original contribution is the index construction, bias logic, no-data handling, and presentation built on top of that data.
Limitations and disclaimer
COT is weekly, reported with a lag, and only exists for CFTC-reported futures — so this is context, not a timing signal, and it will not read non-CFTC instruments. Positioning extremes indicate potential, not certainty, and can persist for extended periods. This is an analysis tool, not financial advice. Always confirm with your own analysis and manage risk. Indicator
Indicator
COT Heatmap [invincible3]COT Heatmap
COT Heatmap is a professional Commitment of Traders dashboard designed to visualize historical positioning pressure between two selected markets, currencies, commodities, indices, or crypto futures. The indicator converts weekly COT positioning data into an easy-to-read heatmap table, allowing traders to compare Non-Commercial and Commercial positioning strength, extremes, long/short participation, and A-B spread pressure directly on the chart.
The tool is built for macro, forex, commodities, futures, and intermarket analysis. It can automatically detect the current chart symbol or allow the user to manually select Pair A and Pair B from a predefined COT market list.
-----------------------------------------------------------------------------------------------
Main Features
Historical COT heatmap table
Auto symbol detection from the chart
Manual Pair A / Pair B selection
Futures Only or Futures + Options data mode
Non-Commercial, Commercial, or Both participant modes
Separate metric control for Pair A and Pair B
Historical weekly values displayed by date
Adjustable table size, position, start date, and number of periods
Heatmap coloring for fast visual interpretation
Optional A-B positioning spread columns
-----------------------------------------------------------------------------------------------
Data Source
The indicator uses weekly COT data through PulseWire’s COT Library.
Available data modes:
Futures Only
Uses futures positioning data only.
Futures and Options
Uses combined futures and options positioning data.
The indicator uses Legacy COT report categories:
Non-Commercial Positions
Commercial Positions
Open Interest
All COT calculations are performed on the weekly timeframe.
-----------------------------------------------------------------------------------------------
Participant Modes
The indicator supports three participant display modes:
Non-Commercial Only
Shows speculative positioning metrics.
Commercial Only
Shows hedger/commercial positioning metrics.
Both
Shows both Non-Commercial and Commercial metrics side by side.
-----------------------------------------------------------------------------------------------
Core Positioning Formulas
For each selected market:
Open Interest
OI = Total Open Interest
Non-Commercial Net Position
NC Net = NC Long − NC Short
Commercial Net Position
Commercial Net = Commercial Long − Commercial Short
Long Change
Long Change = Current Long − Previous Week Long
Short Change
Short Change = Current Short − Previous Week Short
Net Change
Net Change = Long Change − Short Change
-----------------------------------------------------------------------------------------------
Long% and Short% Formulas
The indicator normalizes long and short positions against open interest.
Long Percentage
Long% = Long Positions / Open Interest × 100
Short Percentage
Short% = Short Positions / Open Interest × 100
These values show how much of total open interest is held on the long or short side by a specific participant group.
-----------------------------------------------------------------------------------------------
Flip% Formula
Flip% measures the net long/short bias as a percentage of open interest.
Flip%
Flip% = Long% − Short%
Interpretation:
Positive Flip% = participant group is net long
Negative Flip% = participant group is net short
Higher positive values show stronger bullish positioning
Lower negative values show stronger bearish positioning
Example:
If Non-Commercial Long% = 42%
and Non-Commercial Short% = 25%
Then:
NC Flip% = 42 − 25 = +17%
This means Non-Commercial traders are net long by 17% of open interest.
-----------------------------------------------------------------------------------------------
Difference Metrics
The indicator compares Non-Commercial and Commercial net positioning.
Non-Commercial Difference
NC Difference = NC Net − Commercial Net
This measures how strongly speculative positioning differs from commercial positioning.
Commercial Difference
Commercial Difference = Commercial Net − NC Net
This is the inverse view, useful when analyzing commercial hedger pressure.
-----------------------------------------------------------------------------------------------
Diff13 / Diff26 / Diff52 Formulas
The Diff columns are stochastic-style normalized scores of the positioning difference over different historical windows.
Stochastic Positioning Score
Stoch(X, Length) =
(X − Lowest(X, Length)) / (Highest(X, Length) − Lowest(X, Length)) × 100
If the range is zero, the value returns 50.
Where:
X = selected positioning series
Length = 13, 26, or 52 weeks
NC Diff13 *
NC Diff13 = Stoch(NC Difference, 13)
NC Diff26
NC Diff26 = Stoch(NC Difference, 26)
NC Diff52
NC Diff52 = Stoch(NC Difference, 52)
Commercial Diff13
Commercial Diff13 = Stoch(Commercial Difference, 13)
Commercial Diff26
Commercial Diff26 = Stoch(Commercial Difference, 26)
Commercial Diff52
Commercial Diff52 = Stoch(Commercial Difference, 52)
Interpretation:
Values near 100 show positioning is near the upper extreme of the selected lookback period
Values near 50 show neutral/mid-range positioning
Values near 0 show positioning is near the lower extreme of the selected lookback period
-----------------------------------------------------------------------------------------------
COT Index Formulas
The COT Index measures where current net positioning stands relative to its own historical range.
COT Index
COT Index =
(Current Net Position − Lowest Net Position over N weeks) /
(Highest Net Position over N weeks − Lowest Net Position over N weeks) × 100
If the range is zero, the value returns 50.
-----------------------------------------------------------------------------------------------
Non-Commercial COT Index
NC Index 52
NCIdx52 = Stoch(NC Net, 52)
This shows where current Non-Commercial net positioning stands within its 1-year range.
NC Index 156
NCIdx156 = Stoch(NC Net, 156)
This shows where current Non-Commercial net positioning stands within its 3-year range.
-----------------------------------------------------------------------------------------------
Commercial COT Index
Commercial Index 52
ComIdx52 = Stoch(Commercial Net, 52)
This shows where current Commercial net positioning stands within its 1-year range.
Commercial Index 156
ComIdx156 = Stoch(Commercial Net, 156)
This shows where current Commercial net positioning stands within its 3-year range.
-----------------------------------------------------------------------------------------------
A-B Spread Formulas
The indicator can also compare Pair A and Pair B positioning directly.
A-B Non-Commercial Flip%
A-B NC Flip% = Pair A NC Flip% − Pair B NC Flip%
A-B Commercial Flip%
A-B Commercial Flip% = Pair A Commercial Flip% − Pair B Commercial Flip%
Interpretation:
Positive A-B Flip% means Pair A has stronger positioning than Pair B
Negative A-B Flip% means Pair B has stronger positioning than Pair A
Useful for forex pair analysis, relative commodity analysis, and intermarket comparison
Example:
If EUR NC Flip% = +20%
and USD NC Flip% = +5%
Then:
EUR − USD NC Flip% = +15%
This suggests stronger speculative positioning in EUR relative to USD.
-----------------------------------------------------------------------------------------------
Heatmap Color Logic
The table uses color gradients to make positioning extremes easy to identify.
For score-based columns such as Diff13, Diff26, Diff52, NCIdx52, NCIdx156, ComIdx52, and ComIdx156:
High values move toward the positive color
Mid-range values move toward the neutral color
Low values move toward the negative color
Default colors:
Positive: Blue
Neutral: Pink
Negative: Red
For Long% columns:
Higher Long% is treated as stronger
Lower Long% is treated as weaker
For Short% columns:
Higher Short% is treated as weaker
Lower Short% is treated as stronger
For Flip% columns:
The heatmap uses a signed scale.
Signed Heatmap Normalization
Normalized Flip Value =
(Flip% + Flip Scale) / (2 × Flip Scale)
The value is clamped between 0 and 1.
Default Flip Scale = 35%
This means:
+35% or above = strong positive color
0% = neutral color
−35% or below = strong negative color
-----------------------------------------------------------------------------------------------
How to Read the Table
Each row represents one weekly COT snapshot.
The Date column shows the COT week.
Pair A and Pair B are displayed in separate grouped sections. Each section can include Non-Commercial metrics, Commercial metrics, or both, depending on user settings.
Important interpretation guidelines:
Diff13 / Diff26 / Diff52
Shows short-term, medium-term, and 1-year positioning extremes between Non-Commercial and Commercial groups.
NCIdx52 / NCIdx156
Shows whether speculative positioning is historically stretched or depressed.
ComIdx52 / ComIdx156
Shows whether commercial hedger positioning is historically stretched or depressed.
Long%
Shows the long-side participation as a percentage of open interest.
Short%
Shows the short-side participation as a percentage of open interest.
Flip%
Shows the net directional bias after subtracting short exposure from long exposure.
A-B Flip%
Shows relative positioning pressure between the two selected markets.
-----------------------------------------------------------------------------------------------
Example Use Cases
Forex Analysis
Use Pair A and Pair B to compare currency futures positioning.
Example:
Pair A = EUR
Pair B = USD
This allows EUR/USD positioning analysis using COT data.
Commodity Analysis
Compare metals, energy, or agricultural markets.
Example:
Pair A = Gold
Pair B = Silver
This helps identify relative speculative or commercial positioning strength.
Index Analysis
Compare equity index futures.
Example:
Pair A = NASDAQ
Pair B = S&P 500
This can help identify relative risk appetite and index positioning rotation.
Macro Sentiment Analysis
Use Non-Commercial positioning to track speculative crowding and Commercial positioning to observe hedging pressure.
-----------------------------------------------------------------------------------------------
Notes
COT data is weekly and is not designed for intraday signals. This indicator is best used as a macro positioning tool, sentiment confirmation tool, or higher-timeframe market context dashboard.
The heatmap does not generate direct buy or sell signals. Instead, it provides a structured view of positioning extremes, participant behavior, and relative strength between selected COT markets.
Extreme readings can remain extreme for long periods, so COT data should be combined with price action, trend structure, volatility, liquidity, and broader market context.
-----------------------------------------------------------------------------------------------
Summary
COT Historical Heatmap transforms weekly Commitment of Traders data into a clean, customizable, and visually intuitive positioning dashboard. By combining Net Positioning, Long%, Short%, Flip%, COT Index, Difference Scores, and A-B relative spread analysis, it helps traders understand how Non-Commercial and Commercial participants are positioned across major futures markets.
Indicator
Stocks: Dashboard [invincible3]Stocks Dashboard is a professional all-in-one stock analysis dashboard built directly for PulseWire charts. It is designed to help investors, traders, and analysts quickly evaluate a stock using a combination of fundamental strength, valuation, financial health, income quality, shareholder return, and price momentum.
The indicator displays a clean table-based dashboard on the chart and converts raw financial and technical data into easy-to-read category scores. Instead of checking many separate financial ratios manually, this dashboard organizes the most important stock metrics into structured sections and gives a clear visual overview of the company’s current condition.
The dashboard includes composite scoring for Quality, Value, Growth, Financial Health, Income / Shareholder Return, and Momentum. Each category is scored from 0 to 100 and classified using simple rating labels such as Elite, Strong, Fair, Weak, or Risk. This allows users to quickly compare the strength and weakness of a stock across multiple dimensions.
The Valuation section includes important valuation metrics such as P/E TTM, Forward P/E, PEG Ratio, P/S, P/B, EV/EBITDA, EV/Sales, Earnings Yield, Operating Earnings Yield, Graham Price, Graham Number Upside, EPS TTM, and BVPS. These metrics help identify whether a stock may be expensive, fairly valued, or potentially undervalued.
The Quality section focuses on profitability and business efficiency. It includes ROE, Asset Return / ROA, ROIC, Piotroski F-Score, Gross Margin, Operating Margin, Net Margin, EBITDA Margin, and Free Cash Flow Margin. These values help evaluate how efficiently the company generates profits from its assets, equity, capital, revenue, and operations.
The Growth section tracks the company’s expansion profile using Revenue Growth, EPS Growth, and Sustainable Growth Rate. These metrics help users understand whether the business is improving, stagnating, or losing earnings momentum.
The Financial Health section evaluates balance sheet strength and risk. It includes Debt / Equity, Debt / Assets, Debt / EBITDA, Net Debt / EBITDA, Cash / Debt, Current Ratio, Quick Ratio, Interest Coverage, Altman Z-Score, Operating Cash Flow, and Free Cash Flow. This section is useful for identifying companies with strong liquidity, manageable debt, and lower financial risk.
The Income / Return section is designed for dividend and shareholder-return analysis. It includes Dividend Yield, Payout Ratio, Free Cash Flow Yield, DPS, Buyback Yield, and Buyback Ratio. These metrics help investors evaluate whether a company is returning value to shareholders through dividends, buybacks, and cash generation.
The Momentum section adds a technical view of the stock. It includes RSI 14, 1-month return, 3-month return, 6-month return, 12-month return, 6-month relative strength versus a selected benchmark, 12-month relative strength versus a selected benchmark, volatility, and moving-average trend using the 20, 50, and 200 daily moving averages.
The Snapshot section provides a quick summary of the selected stock, including current price, market capitalization, enterprise value, 52-week position, and distance from the 52-week high. This gives users a fast overview of where the stock is trading relative to its recent range.
Users can customize the stock symbol, benchmark/index symbol, financial period, table position, text size, color theme, and visible sections. The dashboard supports multiple professional themes, including Dark Terminal, Light Terminal, Emerald Pro, Royal Blue, and Amber Desk. Users can also enable or disable colored score backgrounds, score bars, alternating rows, colorful section headers, and directional symbols.
This indicator is useful for:
* Long-term stock analysis
* Fundamental screening
* Valuation comparison
* Dividend and shareholder-return review
* Financial health analysis
* Momentum confirmation
* Relative strength comparison against an index or benchmark
* Building a structured watchlist review process
The goal of this dashboard is to provide a fast, organized, and visually professional stock overview without requiring users to switch between multiple financial websites or separate indicators. It combines fundamental data and technical momentum into one compact chart-based table, making it easier to identify strong, weak, undervalued, overvalued, or financially risky stocks.
Note: The dashboard uses PulseWire’s available financial data. Some metrics may appear unavailable depending on the selected symbol, exchange, market, or financial data coverage. This tool is intended for analysis and research purposes only and should not be considered financial advice.
Indicator
Fib OTE + FVG Confluence [Viprasol]Fib OTE + FVG Confluence — high-probability ICT entries where two edges agree
═══════════════════════════════════════════════════════════
THE IDEA
═══════════════════════════════════════════════════════════
A Fair Value Gap is a good entry zone. An OTE (Optimal Trade Entry) retracement is a
good entry zone. But an FVG that sits INSIDE the OTE — that's the setup ICT traders
actually wait for. This tool maps the higher-timeframe OTE / premium-discount zone,
detects Fair Value Gaps, and does the one thing that matters: it highlights and ALERTS
you when price taps an FVG that lands inside the OTE.
═══════════════════════════════════════════════════════════
HOW IT WORKS
═══════════════════════════════════════════════════════════
1. HTF OTE MAP — From the previous candle range of your chosen higher timeframe
(non-repainting), it builds the Fibonacci map: the OTE band (default 0.618-0.786),
the equilibrium line (0.5) that splits premium from discount, and a directional bias
(Auto from the last HTF candle, or force Long/Short). In a long bias the OTE sits in
discount (below equilibrium) — where you want to buy; in a short bias it sits in
premium.
2. FAIR VALUE GAPS — Standard 3-candle imbalances (bullish `low > high `, bearish
`high < low `), with an optional displacement filter and a minimum-size filter to
cut noise. Each gap is drawn as a box and tracked until filled (Wick / Close /
Average mitigation).
3. CONFLUENCE — the point of the tool. A gap is "confluent" when it overlaps the OTE
band (strict) or, in the looser mode, when a bullish gap sits in discount / a bearish
gap sits in premium. Confluent gaps are highlighted with a ★. Turn on "Show ONLY
Confluent FVGs" and the chart reduces to just the high-probability zones.
4. ALERTS — Get notified when price TAPS a confluent FVG (and optionally when one
forms). One alert, delivered via app / email / SMS / webhook (Text or JSON message).
═══════════════════════════════════════════════════════════
ALERTS SETUP
═══════════════════════════════════════════════════════════
Create one alert → Condition: "Fib OTE + FVG Confluence" → "Any alert() function call",
then pick your delivery (app/email/SMS/webhook) in the dialog. Switch Message Format to
"JSON (webhook)" for bot/automation-friendly output. Messages carry direction, event
(FORMED/TAPPED), and the gap's price range.
═══════════════════════════════════════════════════════════
SETTINGS
═══════════════════════════════════════════════════════════
• HTF Fibonacci / OTE: timeframe, bias (Auto/Long/Short), OTE start/end, show map, colors.
• Fair Value Gaps: min gap %, displacement filter, fill mode, show-only-confluent, colors, box extend.
• Confluence & Alerts: confluence rule (Inside OTE / Favored half), highlight color, form/tap
alert toggles, frequency (once-per-bar-close = no repaint), Text/JSON.
═══════════════════════════════════════════════════════════
HOW TO USE
═══════════════════════════════════════════════════════════
1. Set the OTE higher timeframe (e.g. Daily on an intraday chart).
2. Let Auto bias pick direction, or force Long/Short to your plan.
3. Enable "Show ONLY Confluent FVGs" to see just gaps inside the OTE.
4. Create the alert and wait for a tap of a ★ confluent gap — that's your cue to do
your own analysis and manage risk.
═══════════════════════════════════════════════════════════
LIMITATIONS — PLEASE READ
═══════════════════════════════════════════════════════════
• This is an awareness / confluence tool, not a strategy or signal service — no buy/sell
calls. A confluent tap is a location of interest, not a guarantee.
• The OTE map uses the previous HTF candle range and updates as new HTF candles form;
it reflects current context, not a fixed historical grid.
• FVGs are detected on the chart timeframe; confluence is judged against the OTE active
when each gap forms.
• Not financial advice. Trade at your own risk.
═══════════════════════════════════════════════════════════
CREDITS & ORIGINALITY
═══════════════════════════════════════════════════════════
Fair Value Gaps, OTE, and premium/discount are public ICT concepts. All code here — the
non-repainting HTF OTE map, the FVG detection and mitigation, the confluence logic, and
the alert engine — is original Viprasol work written from the standard definitions. No
third-party Pine code is reused.
Indicator
ICT Silver Bullet & 2022 Entry ModelThis script is a fully automated algorithmic scanner and trade visualizer for the ICT 2022 Mentorship Entry Model, specifically programmed to only look for setups during the Silver Bullet time windows.
Here is a breakdown of how the engine works from top to bottom:
1. Time & Sessions Engine
The script begins by shading your chart background for the three specific "Silver Bullet" execution hours (EST):
London: 03:00 - 04:00 (Silver)
New York AM: 10:00 - 11:00 (Orange)
New York PM: 14:00 - 15:00 (Teal) The script will strictly ignore any price action outside of these three windows.
2. The 5-Phase State Machine
Inside those sessions, the script runs a rigid 5-step sequence to validate the 2022 Model. It will cancel the setup if the sequence is broken.
Phase 1: Liquidity Raid (The Stop Run) The script tracks historical Swing Highs (Buy-Side Liquidity) and Swing Lows (Sell-Side Liquidity). If price sweeps one of these levels, it prints a "BSL Raid" or "SSL Raid" label. Crucially, it nullifies that specific liquidity level immediately after it's swept so you don't get duplicate labels on every single candle.
Phase 2: Market Structure Shift (ChoCh) Upon sweeping liquidity, the script identifies the exact minor swing point that formed just prior to the sweep. It waits for price to aggressively reverse and close past that level. When it does, it plots a line and a "ChoCh" (Change of Character / MSS) label.
Phase 3: Displacement FVG Detection The leg that breaks structure must show institutional displacement. The script scans the exact 3-5 candles that broke the ChoCh level to find a Fair Value Gap (SIBI for shorts, BISI for longs). If it finds one, it draws the gap box on your chart.
Phase 4: Trade Execution The script waits for price to retrace and tap the open boundary of the FVG. The moment price touches it, the script prints a "2022 SHORT ENTRY" or "2022 LONG ENTRY" label.
Phase 5: Trade Management & Visualizer (The code block you highlighted) Upon entry, the script transitions into a live trade manager:
Stop Loss (SL): It calculates an SL exactly 1 tick above the absolute peak of the Liquidity Raid. It draws a solid red line and a red risk box.
Take Profit (TP): By default, it targets the opposing major liquidity pool on the chart. If you toggle it off in settings, it defaults to a strict 1:2 Risk-to-Reward ratio. It draws a solid green line and a green reward box.
Live Tracking: The script physically extends these red and green boxes forward bar-by-bar until price hits either the SL line or the TP line. Once hit, it closes the trade, prints "SL HIT" or "TP HIT", and resets the engine to look for the next setup. Indicator
Bias & Sweep Dashboard1. Inputs & Configuration
Timeframes: Allows you to set the Higher Time Frame (HTF) (default: Daily / D) and the Intermediate/Lower Time Frame (ITF) (default: 4H / 240).
Sweep Settings: Features a customizable Swing Lookback input (default: 10 bars) to determine the structural swing points.
Table Settings: Allows configuration of the visual dashboard placement on the screen (Top Right, Bottom Left, etc.) along with background and text color styling.
2. Detection Logic
Pivots & Liquidity Sweeps:
Finds swing highs and swing lows using ta.pivothigh() and ta.pivotlow().
A Sweep is triggered when a candle's wick breaks past a key swing high/low, but the candle close returns back inside (denoting rejection of liquidity).
Uses request.security() to evaluate these sweeps on your defined HTF and ITF timeframes.
Inversions:
Tracks Fair Value Gaps (FVGs).
An Inversion is triggered when the price closes completely through a recent opposing FVG (e.g. closing above a Bearish FVG, or closing below a Bullish FVG).
Trend Bias:
Calculates trend direction using a standard EMA crossover (50 EMA vs 200 EMA) to decide if the baseline market environment is Bullish, Bearish, or Neutral.
3. Visual Dashboard (Table UI)
At the final bar (barstate.islast), the script builds a 2x4 table panel displaying:
Bias: Displayed as "Bullish" (green), "Bearish" (red), or "Neutral" (gray).
HTF Sweep: Shows ✅ if an HTF sweep is active, else ❌.
ITF Sweep: Shows ✅ if an ITF sweep is active, else ❌.
Inversion: Shows ✅ if an FVG Inversion has occurred, else ❌. Indicator
Adaptive Structural Trail Order Flow, Imbalance & RegimeAdaptive Structural Trail — Order Flow, Imbalance & Regime
What it is
Adaptive Structural Trail is a single, self-contained market-structure framework that re-clocks the chart by participation instead of time, marks the imbalances that real activity leaves behind, lets order flow decide which of those levels still matter, asks a regime filter whether trending behaviour can be trusted right now, and trails the strongest surviving level as an adaptive stop — all summarised in a plain-language dashboard that tells you, at a glance, whether the picture says ride, wait, or stand aside.
It is designed to be market-agnostic: every raw input (price, volume, and the volatility-index reference) is user-selectable, so the same logic runs on index futures, equities, FX, crypto or commodities without touching the code. Defaults are set for NIFTY index futures; change the volatility symbol and (if needed) the volume source for other instruments.
Why the components are combined (this is one tool, not a bundle)
Each layer measures a different facet of one process — activity creating structure, structure decaying or being defended, and a regime deciding whether to act. They are not independent indicators stacked for visual effect; remove any one and the others lose their meaning:
Delta clock (the substrate). A virtual bar closes only when cumulative signed volume becomes statistically significant (σ × a multiplier). Every downstream reading is therefore spaced by participation, not by the clock — a quiet 10 minutes and a violent 10 seconds are treated differently, which is the whole point.
Imbalance / fair-value-gap detection runs on those virtual bars, so a level is recorded only where genuine activity gapped price, not on arbitrary time bars.
Order-flow lifecycle (charge → decay → breaker/dead). When price returns to a level, delta adjudicates the outcome: absorbed-and-defended levels are reborn as breakers; levels that are surged through are killed. Flow decides what structure survives.
Regime gate (efficiency ratio + volatility burst). This routes everything. The trail is shown and signals arm only where trend behaviour is statistically credible; in range/transition/high-volatility states the tool deliberately stands aside.
Confidence fusion. Structure strength, cumulative-delta slope and flow toxicity (VPIN) are blended into one confidence number, which the dashboard converts into a plain instruction.
That coupling — a volume-significance clock feeding imbalance detection whose survival is adjudicated by order flow and gated by regime, fused into a single trailing level and a decision read-out — is the original contribution here.
How to use it
Add it to any liquid instrument. It is built for intraday timeframes (1–15 min is the sweet spot on index futures).
Read the dashboard top-down: the ACTION banner is the headline (e.g. LONG · ride the trail, RANGE · stand aside). Below it: bias + confidence, market state, the actual trail-stop price, order flow, flow toxicity, volatility context, and a plain "what to do" line.
Treat the coloured trail as a structure-based stop while the market state is a trend; when the state leaves trend, the trail disappears by design.
The imbalance zones show where unfilled activity sits; fresh, tapped and breaker levels are colour-coded (see the on-chart legend).
Edge-calibration panel (bottom-right): for transparency it scores past signals against a regime-matched base rate and reports EDGE = Hit − Base with a 95% confidence interval. Read the Edge column, not the raw hit-rate. This is descriptive of the past on your symbol — not a backtest and not a forward guarantee.
Key-info panel (top-left): instrument, timeframe, the live data source (see honesty note), threshold, ATR and level counts.
Honest note on data (please read)
PulseWire exposes no true tick-by-tick aggressor delta and cannot build custom bars, so delta here is a proxy: signed intrabar volume taken from the finest lower timeframe your data plan returns — 1-second where available, otherwise 1-minute — falling back to bar-shape when no lower-timeframe data exists. The live source is shown as "Delta source" in the Key-info panel, so you always know which mode is active. Non-repaint: the delta clock advances and structure/regime/signals resolve only on confirmed bars; the trail line itself updates within the forming bar as a current estimate.
Originality
The novelty is the synthesis and coupling, not any single classical block. A participation clock is used to gate imbalance detection; order flow is used to adjudicate level survival; regime is used to route the entire read; and the whole thing collapses into one trailing level plus a decision dashboard and a self-calibration panel. Every raw input is user-selectable so the framework generalises across markets.
Concept credits
This tool synthesises well-established, publicly documented ideas; credit to their originators:
Information / volume-driven bars & VPIN flow toxicity — Marcos López de Prado; Easley, López de Prado & O'Hara.
Efficiency Ratio (trend vs. noise) — Perry J. Kaufman.
Trade-side classification (tick rule) — Lee & Ready.
Market impact & absorption (square-root law) — Almgren; Tóth & Bouchaud.
Wilson score interval (small-sample proportion CI) — E. B. Wilson.
Imbalance / fair-value-gap and trailing-stop concepts are long-standing, widely used market-structure ideas. The synthesis and the Pine implementation are the author's own.
Exported outputs (for use in other scripts)
Available via input.source() in any other indicator, with clean generic names: Bias Score (signed conviction, ±10), Trail Stop, Trail Direction, Regime State, Confidence, Leading Strength, CVD Slope, Flow Toxicity, Cumulative Delta, Volatility ROC, Volatility Bias.
Disclaimer
For research and education only. This is an analytical tool — not financial advice, not a signal service, and not a guarantee of future results. No indicator has an inherent edge; validate with your own testing, apply realistic costs, and manage risk. You are solely responsible for your trading decisions. Indicator
Indicator
HTF Candle PO3 AMD SessionsHTF Session Dashboard (Higher Timeframe Candles)
Core idea: This indicator allows you to view the price action of a Higher Timeframe (HTF) drawn as full candles directly on your current lower timeframe chart. It's designed to keep you aware of the macro market structure without needing to constantly switch timeframes.
How It Works
Instead of just showing standard HTF levels, this indicator dynamically builds and projects the current day's higher timeframe candles (e.g., 4-Hour candles) off to the right side of your active chart (e.g., a 1-minute or 5-minute chart).
The candles are constructed in real-time. As price moves on your lower timeframe, the active "current" HTF candle will grow its wicks and adjust its body live.
Key Features
Live HTF Candle Projection: Displays the sequence of HTF candles that make up the current trading day, spaced neatly to the right of the current price action.
Session Extremes: Automatically draws dotted reference lines stretching across your chart to highlight the absolute High, Low, Body High, and Body Low of the entire current session.
Live Countdown Timer: Shows a dynamic timer above and below the candle cluster indicating exactly how much time is left until the active HTF candle closes.
Hour Labels: Every HTF candle has a small label indicating its open hour (with an adjustable timezone offset setting) to help you quickly identify Kill Zones within the macro candles.
Visual Customization: Fully adjustable body width, transparency, spacing, offset distance, and bull/bear color schemes.
Clean Daily Reset: The indicator automatically clears the prior day's candles at midnight (exchange time) and begins building the new sequence, keeping your chart uncluttered.
Why Use This?
When trading intraday (like on a 1m chart), it's easy to get lost in the noise and trade right into a major 4-Hour support or resistance level. By projecting the 4-Hour candles directly onto your 1-minute chart, you always know exactly where you are relative to the higher timeframe narrative and structure.
Recommended Settings
HTF Setting: 240 (4 Hours) or 60 (1 Hour) when trading on a 1m–15m chart.
Hour Label Offset: Adjust this (e.g., +1 or -1) if you want the candle hour labels to match a specific local time zone (like EST) rather than exchange time.
Indicator
FVG & OB Quality ScorerICT FVG & OB Quality Scorer
Core idea: Not all Fair Value Gaps and Order Blocks are created equal. This indicator answers the question "Which FVG or Order Block will actually work?" by scoring every detected zone on 10 confluence pillars derived from ICT's (InnerCircleTrader) 2022–2024 Mentorship methodology.
How It Works
Every time an FVG or Order Block forms on the chart, the indicator runs it through a 10-factor scoring engine (each factor scored 0–10, total 0–100):
# Pillar What It Checks
❶ Displacement / CISD Was the move impulsive? Body > 70% of candle range = institutional candle. Also checks for Change in State of Delivery (close crossing prior candle's open).
❷ Liquidity Sweep Was BSL or SSL taken before the zone formed? Checks swing pivots, Prior Day High/Low, and IPDA 20-day levels.
❸ Premium / Discount Bullish zones in discount (< 50% of range) score high. Bearish zones in premium (> 50%) score high.
❹ Market Structure Is the zone aligned with the current trend (BOS)? With-trend = 10, counter-trend = 1.
❺ HTF Bias Does the Daily (configurable) candle direction agree with the zone? Misalignment = low probability.
❻ OTE Fibonacci Is the zone inside the 62%–79% Optimal Trade Entry retracement? The 70.5% "sweet spot" scores perfect 10.
❼ FVG + OB Overlap Is there a confluence zone where an FVG and Order Block exist at the same price level? This is ICT's highest-probability setup.
❽ Volume Was displacement volume above the 20-bar average? 3x+ average = clear institutional activity.
❾ Kill Zone Timing Formed during London KZ, NY AM KZ, or Silver Bullet windows? "Time supersedes price."
❿ Freshness First-touch zones score highest. Zones decay in score and fade in color as they age.
Grading Scale
Score Grade Meaning
86–100 S Elite — high conviction, full size
71–85 A/A+ Strong — tradeable with confirmation
51–70 B/B+ Above average — needs extra confluence
26–50 C/C+ Below average — watch only
0–25 D Weak — skip entirely
What You See On The Chart
Color-graded zones: Red (weak) → Orange → Gold → Green → Bright Green (elite)
FVGs = solid-border boxes labeled BISI / SIBI
Order Blocks = dashed-border boxes labeled +OB / -OB
CE line = dotted midline (Consequent Encroachment — ICT's 50% level)
MT line = solid midline on OBs (Mean Threshold — ICT's precision entry)
Score labels with letter grade — hover for full 10-pillar tooltip breakdown
Dashboard table ranking all active zones by score with market context (Structure, HTF Bias, Kill Zone status)
Zones fade in color as they age (freshness decay) and are removed/dimmed on mitigation
Key Settings
Min Score to Display — Set to 60+ to only see B+ and above (recommended for clean charts)
Mitigate On — Wick vs Close (ICT uses Close for higher conviction)
HTF Timeframe — Defaults to Daily; change to 4H for swing setups
IPDA Reference Lines — Toggle 20-day high/low institutional levels
Kill Zone sessions — All configurable in NY time Indicator
Asian & London Session Highs/LowsDescription:
This indicator automatically detects and plots the highest and lowest price points of the Asian and London trading sessions. It is designed specifically for day traders, particularly those using Smart Money Concepts (SMC), Inner Circle Trader (ICT) methodologies, or classic Price Action strategies, who rely on session liquidity and daily market structure.
Session highs and lows act as major liquidity pools. A common trading concept involves waiting for the London or New York session to sweep the Asian session liquidity (High or Low) before anticipating a reversal or a strong trend continuation. This tool visually highlights these crucial levels directly on your chart, saving you time and keeping your analysis precise.
Key Features:
1. Accurate High/Low Detection: Pinpoints the exact highest and lowest wicks within your defined session windows.
2. Fully Customizable Session Times: Adjust the start and end times for both the Asian and London sessions directly from the indicator settings. Perfect for isolating specific timeframes like the "Asian Killzone".
3. Native Timezone Support: Built with Pine Script v6, it handles timezones flawlessly. You don't need to do any complex UTC math—just input your session string (e.g., 0000-0800) and the indicator does the rest.
4. Clean & Uncluttered Charts: Draws clean horizontal lines extending to the right for easy visibility. The script automatically removes lines from previous days, ensuring your current chart remains neat and focused on the active session.
5. Visual Customization: Easily change line colors, thickness, and how far the lines extend to the right to perfectly match your personal chart theme.
How to Use:
1. Apply the indicator to your intraday chart (e.g., 5m, 15m, 30m, 1H).
2. Open the indicator Settings.
3. Adjust the Asian Session Time and London Session Time to match your trading strategy (default is set to standard broad sessions, but can be narrowed down to specific killzones).
4. Watch for price action reactions, breakouts, or liquidity sweeps around these key structural lines during the trading day.
Note: This indicator is designed for intraday timeframes. It will not display lines on Daily (1D) or higher timeframes.
Indicator
Indicator
Market Euphoria Index - MEI1. The Three Core Factors
The script measures market sentiment by evaluating three different "factors" of price action and assigning a score from 0 to 100 for both Euphoria and Panic.
RSI Factor (Momentum Extremes): It checks if the traditional RSI is overextended.
If RSI is above 70, it scales the value into an Euphoria Score. For example, an RSI of 85 will have a higher Euphoria score than an RSI of 75.
If RSI is below 30, it scales into a Panic Score.
VWAP Stretch Factor (Overextension): It measures how far the current price has stretched away from the Volume Weighted Average Price (VWAP), normalized by the Average True Range (ATR).
If the price shoots up higher than the VWAP by a multiple of the ATR (default is 2.0x), it triggers a maximum 100 Euphoria Score (indicating the asset is heavily overvalued relative to its average volume-weighted baseline).
If it crashes below the VWAP by the same distance, it triggers a 100 Panic Score.
Price Momentum / K's Factor (Candlestick Sentiment): This looks purely at the candlesticks over the last 14 periods (by default).
It counts how many candles closed higher than they opened (Bullish candles) and converts that ratio into an Euphoria Score.
It does the inverse for Bearish candles to create a Panic Score.
2. The Composite Blend
Once the script has the three Euphoria scores and three Panic scores, it averages them:
pinescript -
euphoriaScore = (rsiEuphoria + vwapEuphoria + momEuphoria) / 3
panicScore = (rsiPanic + vwapPanic + momPanic) / 3
Finally, it subtracts the panicScore from the euphoriaScore to get the final mei value.
3. Interpretation & Visuals
The indicator plots as a histogram with dynamic colors and static threshold lines:
> +50 (Red): Extreme Euphoria. The market is firing on all cylinders (RSI overbought, stretched far above VWAP, heavily bullish candles). High risk of a blow-off top reversal.
> +20 (Orange): Standard Euphoria/Strong Uptrend.
Between -20 and +20 (Gray): Neutral market.
< -20 (Teal): Standard Panic/Strong Downtrend.
< -50 (Green): Extreme Panic. The market is oversold, stretched far below VWAP, and showing heavy bearish momentum. High probability of a capitulation bottom bounce.
The script also includes built-in alert conditions (Extreme Euphoria Alert and Extreme Panic Alert) so you can automate notifications when the market reaches these psychological extremes! Indicator
Ultimate Hull SuiteGreymyst Ultimate Hull Suite
The Greymyst Ultimate Hull Suite is a premium, multi-functional trend-following indicator designed to provide traders with highly accurate, low-lag momentum signals. Built entirely from the ground up for professional trading, this suite combines advanced Moving Average variations with dynamic volatility filters and multi-timeframe analysis to offer extreme confluence in a single tool.
🌟 Core Concepts & Features
1. Advanced Hull Variations
Traditional moving averages often suffer from lag. The Hull Moving Average solves this by prioritizing recent price action. This suite allows you to toggle between three powerful variations:
HMA (Standard Hull): The classic low-lag moving average.
EHMA (Exponential Hull): Uses exponential calculations to react even faster to sudden price spikes.
THMA (Triple Hull): Offers ultra-smooth trend detection, practically eliminating market noise and false signals during choppy ranges.
2. Multi-Timeframe (MTF) Alignment
Trading against the macro trend is a common pitfall. The built-in MTF engine allows you to anchor your Hull Moving Average to a higher timeframe (e.g., viewing the 4-Hour Hull trend on a 15-minute chart). This ensures you are only taking trades that align with the dominant market direction.
3. Dynamic Volatility Bands (Hull Envelopes)
Instead of static support and resistance, this suite wraps the Hull Moving Average in ATR-based Volatility Bands.
Trend Cloud: The area between the Hull and the bands is filled with a bullish (green) or bearish (red) cloud.
Mean Reversion: When price action aggressively pierces the upper or lower bands, it signals an overextended market, warning you of potential pullbacks or mean-reversion opportunities.
4. Squeeze Momentum Confluence Filter
A trend is only as strong as the volume and volatility behind it. This indicator integrates a hidden Squeeze Volatility Engine (combining Bollinger Bands and Keltner Channels).
The Filter: Buy and Sell signals are strictly suppressed if the market is stuck in a low-volatility "squeeze" (consolidation).
Signals are only generated when the Hull changes direction AND volatility is actively expanding, keeping you out of flat, choppy markets.
5. Automated Signals & Alerts
The suite visually prints clear B (Buy) and S (Sell) markers on your chart when high-probability confluence is met (Trend Shift + Volatility Expansion).
It includes comprehensive, ready-to-use Alert Conditions so you can automate your trading via webhooks or receive notifications directly to your phone.
⚙️ How to Use It for Confluence
Trend Confirmation: Use the color of the Hull MA (Green for Up, Red for Down) as your primary directional bias.
Entry Triggers: Look for Buy/Sell markers printed by the indicator. Because of the built-in Squeeze filter, these markers represent moments where price is reversing with momentum.
Take Profit / Stop Loss: Use the outer ATR bands as dynamic profit targets or trailing stop-loss zones.
(Created by greymyst) Indicator
COT: Noncommercial Net (Futures)The CFTC publishes Commitment of Traders data every Friday. Inside that report, the "Noncommercial" category — large speculators, managed money, trend-followers — is the one most traders actually want to watch. This script strips everything else away and shows their net stance: Long minus Short, futures contracts only.
Positive values mean large speculators are net long. Negative means net short. A move across zero often marks a meaningful shift in positioning, not just noise.
How it works
The indicator auto-detects the correct CFTC code from the chart's symbol using PulseWire's official LibraryCOT, so you don't need to configure anything. Open it on BTC futures, gold, crude oil, the yen — it resolves the code and pulls the right data automatically.
A teal/red histogram shows whether net positioning is positive or negative. A step-line sits on top for precise bar-by-bar reading. Zero is marked with a dashed reference line.
What it doesn't do
It doesn't tell you when to buy or sell. COT data is released weekly and lags several days behind the reporting cutoff — it's positioning context, not a signal. Use it alongside price action and other tools to understand who is leaning which way, not as a standalone trigger.
Notes
Futures only (not futures + options combined)
Noncommercial Long − Noncommercial Short = Net
Data source: CFTC Legacy report via PulseWire's LibraryCOT v6
Works on any symbol that has a CFTC code in PulseWire's database
Not financial advice. Position sizing and risk management are your responsibility. Indicator
Indicator
Indicator
Liquidity Structure Framework [PakunFX]Liquidity Sequence Framework
Liquidity Sequence Framework (LSF) is a market structure analysis indicator designed to visualize the progression of liquidity events, structure shifts, and Fair Value Gaps (FVGs) within a single analytical framework.
Instead of focusing on individual signals, the indicator organizes multiple market events into a sequential process, helping traders observe how price structure develops over time. The script combines swing structure, liquidity sweeps, trend filtering, and Fair Value Gap detection into a unified charting tool.
Features
External and Internal Swing Structure detection
Liquidity Sweep identification (SSL / BSL)
Bullish and Bearish Structure Shift detection
Automatic Fair Value Gap (FVG) detection
EMA-based trend filter
Premium / Discount (Equilibrium) filter
Configurable setup conditions
Visual sequence tracking with alerts
How it Works
The indicator monitors market structure using external and internal swing highs and lows. When liquidity is swept beyond a previous swing level, a new sequence begins. The script then tracks whether price confirms a structure shift and subsequently forms a Fair Value Gap within a configurable sequence window.
Trend filtering can be applied using Fast and Slow EMA conditions, while optional Premium / Discount and Fair Value Gap requirements allow users to customize how potential setups are displayed.
Display Elements
External Swing High / Low
Internal Swing High / Low
Liquidity Sweep markers (SSL / BSL)
Structure Shift markers
Active Fair Value Gap zones
Fast and Slow EMA
Equilibrium level
Setup markers
Alerts
Alerts are available for:
Liquidity Sweep
Bullish Structure Shift
Bearish Structure Shift
Bullish Sequence Setup
Bearish Sequence Setup
These alerts are intended to notify users when predefined analytical conditions are detected.
Notes
Liquidity Sequence Framework is designed as a market analysis tool. It visualizes structural relationships between liquidity events and price development but does not generate trading recommendations or predict future market direction.
Disclaimer
This script is provided for educational and research purposes only.
All calculations are based on historical price data. The displayed structures, Fair Value Gaps, and sequence conditions are intended to support chart analysis and should not be interpreted as guarantees of future market behavior or trading performance.
Indicator
X Trading Auto-Pilot V2.0Welcome to X Trading Auto-Pilot V2.0 — the ultimate minimalist trading system designed for traders who want zero chart clutter and 100% execution clarity.
We stripped away the noise, removed the complex lines and bands, and built a highly accurate, automated signal engine optimized strictly for the 15-Minute timeframe.
🌟 Core Features:
1. Zero Clutter, Pure Action
Analysis paralysis is the enemy of profitability. This indicator removes all visual noise from your chart. You will only see the institutional macro trend and the exact entry signals.
2. High-Accuracy 15m Engine
By locking the algorithm to the 15-minute chart, we eliminate the random algorithmic wicks of the lower timeframes. The engine runs quietly in the background, measuring hidden market exhaustion (RSI/ATR alignment) and waiting for high-volume engulfing candles in the direction of the macro trend.
3. Automated Trade Management
When a signal triggers, the script instantly calculates a mathematically perfect 1:2 Risk-to-Reward ratio based on current market volatility. It plots a clean, visual box on your chart detailing your exact:
💰 ENTRY Price
😢 STOP LOSS Price
🔥 TARGET (Take Profit) Price
4. Bot-Ready JSON Alerts (Fully Automated)
Want to trade hands-free? The alert system has been re-engineered to output clean, structured JSON webhooks. Whether you use 3Commas, Cornix, or your own custom trading bot, the indicator sends perfectly formatted data instantly:
{"Action": "BUY", "Asset": "BTCUSDT", "Entry": 65120.50, "SL": 64800.00, "TP": 65760.50}
5. Universal Asset Compatibility
This Auto-Pilot suite dynamically adapts its risk math to the asset you are trading. Fully compatible with: EURUSD, USDCAD, BTCUSDT, ETHUSDT, XAUUSD, XAGUSD, US100, WTI, and DXY.
How to get access:
This is a premium, Invite-Only system locked exclusively for the X Trading community.
📲 To request access, ask questions, or see how we automate these trades, reach out to me on TikTok: @xtrading38 Indicator
X Trading Universal L3 - Liquidity & Order FlowWelcome to the pinnacle of algorithmic scalping: X Trading Universal L3.
This indicator bridges the gap between Smart Money Concepts (SMC) and Level 2 Order Flow (Bookmap-style liquidity tracking). It has been mathematically engineered from the ground up to dynamically scale its risk engine across the world's most heavily traded institutional assets.
🌐 Universal Asset Compatibility
This suite is locked and optimized strictly for the 5-minute timeframe on the following premium assets:
Forex: EURUSD, USDCAD, DXY
Crypto: BTCUSDT, ETHUSDT
Commodities: XAUUSD (Gold), XAGUSD (Silver), WTI (Oil)
Indices: US100 (Nasdaq/NDX)
🌟 Level 3 Core Mechanics:
1. Simulated Order Flow & Liquidity Pools
We bring Level 2 book data visualization directly to your chart. The L3 engine actively scans for overlapping structural pivots to map out dense concentrations of institutional limit orders.
Watch price gravitate toward these dashed Liquidity Bands to hunt stops before reversing.
2. Dynamic ATR Risk Scaling (Universal Engine)
You no longer need to adjust inputs when switching from Crypto to Forex. The mathematical engine reads the real-time True Range (ATR) of the asset you are viewing and dynamically builds your Stop Loss and Take Profit boxes to perfectly fit that exact market's pip/tick volatility.
3. The L3 Sniper Signal Matrix
Signals are highly filtered and only trigger when three institutional factors align:
Macro Alignment: Price must be trading with the 1-Hour Institutional Trend.
Liquidity Sweep: Price must sweep a major L3 Liquidity Pool or structural Order Block.
Volume Imbalance: A massive engulfing candle must confirm the market makers are stepping in.
When these align, you receive the exact 💰 Entry, 😢 Stop Loss, and 🔥 Take Profit zones drawn beautifully on your chart.
4. Advanced Trade Management (Breakeven Tech)
The live Win Rate dashboard doesn't just track raw wins and losses. It features professional trade management: if a trade reaches 50% of the Take Profit target, the algorithm internally moves your Stop Loss to Breakeven, protecting your capital and accurately updating your win rate stats.
5. The X Trading Dashboard & Market Rhythm
Live Session Overlays: Clean background shading for Asia, London, and NY sessions.
Market Rhythm: Real-time dashboard tracking of the 1H trend, current active asset, live ATR volatility, and overall daily range.
How to get access:
This is a premium, Invite-Only system locked exclusively for the X Trading community.
📲 To request access, ask questions, or watch this system dominate live in action, reach out to me on TikTok: @xtrading38 Indicator
X Trading V3.0 - Ultimate Master Suite Welcome to the X Trading Master Suite XAUUSD ONLY— a complete, all-in-one algorithmic trading system engineered specifically for high-probability scalping and day trading.
Built around the core concepts of Smart Money Concepts (SMC), market rhythm, and the AMD (Accumulation, Manipulation, Distribution) cycle, this suite gives you institutional-level context directly on your chart without the clutter.
🌟 Core Features:
1. The X Trading Dashboard (Live Rhythm Tracking)
Never second-guess market conditions again. The live dashboard tracks the current trading session (Asia, London, NY), the 1-Hour macro trend, today's total range ($ move), and the exact market state (Break vs. Retest) so you know exactly when to execute.
2. Institutional SMC Matrix
The algorithm automatically tracks major liquidity zones in real-time:
Order Blocks (OB): Dynamic support and resistance boxes drawn from structural pivots.
Fair Value Gaps (FVG): Auto-detected market imbalances showing where institutions left unfilled orders.
3. Precision Signals with Automated Risk Management
When a highly filtered, institutional liquidity sweep aligns with market momentum, the indicator fires a Sniper Buy/Sell signal. It instantly plots:
💰 Exact Entry Line
😢 Dynamic Stop Loss (SL) and an Extended SL (🛡️) for high volatility.
🔥 Target Take Profit (TP) Box: A visual "ghost candle" showing the exact zone to take profits.
🚀 Runner Target: For extended momentum plays.
4. Market Rhythm & Momentum
Session Backgrounds: Clean, transparent overlays showing the Asian, London, and NY sessions.
Double Bollinger Band Faint Overlays: Visually identifies when the market is ranging, breaking out, or retesting the mean.
EMA Ribbon (8/34) & Moving Averages: A custom momentum ribbon fill paired with the 50, 100, and 200 EMAs to keep you on the right side of the trend.
Early Exit (X Marks): If momentum shifts sharply against your trade, the algorithm prints a visual "X" to warn you to secure profits early.
5. Automated Alert System
Fully compatible with PulseWire alerts. Receive exact Entry, SL, and TP prices directly to your device the second a setup occurs, as well as high-momentum session open warnings.
How to get access:
This is a premium, Invite-Only system locked for the X Trading community.
📲 To request access, ask questions, or watch this system dominate live in action, reach out to me on TikTok: @xtrading38 Indicator
