Exit

CCI - SWIFF KNIFE CCI indicator swiff knife. A lot of different usages of CCI ae possible with this script : - 2 CCI lines crossovers. - CCI - 0 Line crossovers - CCI + Moving Average crossovers (many types of MA are available) Filters can be added. CCI can be used as a confirmation indicator, a continuation indicator, an exit indicator, a chopiness indicator .... It can even make coffee, who knows.

Indicator

CDub's BolBands Setup Uses a set of Bollinger Bands (user defined deviation, user defined deviation * 2) to determine possible entry set ups. Signals are triggered when price crosses the first band (closest to the baseline MA) in the desired direction. baseline can be your take profit 1 target The inside band determines entry and can be used as a take profit 2 target (Opposite side of baseline) The outside band is a suggested stop loss target (Same side of baseline) and can be used as a take profit 3 target (Opposite side of baseline) Suggestions are welcome! -CDub

Indicator

by Obi-wanClintobe

OSCAR Oscillator by GenZai - NNFX OSCAR Oscillator by GenZai Green line is the Oscar Rough Red line is the Oscar By default based on the 8 last candles and smoothed using RMA Purple line is the Slow Oscar By default based on the 16 last candles and smoothed using WMA HOW TO USE Exit signaling This indicator can be used as an exit indicator when line cross each other. Entry signaling When the green line crosses up, it indicates a long entry When the red line crosses up, it indicates a short entry Overbought/Oversold When the indicator crosses the dashed grey lines it indicates Overbought Oversold Slow Oscar Add-on This is an Add-on to the orignal Oscar indicator Can be hidden if you want the original experience of the Oscar indicator. Can be used as a confirmation indicator by looking at the direction of the slope to verify is your are trending long or trending short. Can be used as a baseline to confirm signals given by Oscar Can be used to tweak your signals and test different settings. Stock or Forex? The program was originally written for stocks, but works equally well with the Forex market. How this indicator is calculated ? This is the formula we use to calculate the Oscar: let A = the highest high of the last eight days (including today) let B = the lowest low of the past eight days (including today) let C = today's closing price let X = yesterday's oscillator figure (Oscar) Today's "rough" oscillator equals (C-B) divided by (A-B) times 100. Next we "smooth" our rough number (let's call it Y) like this: Final oscillator number = ((X divided by 3) times 2), plus (Y divided by 3). SETTINGS: You can choose between different smoothing options: RMA: Moving average used in RSI. It is the Adjusted exponential moving averages (also known as Wilder's exponential moving average) SMA : Simple moving average EMA : Exponential moving average WMA : Weighted moving average

Indicator

FauxLife EFI Modification to Elder's Force Index (EFI) Ability to change calculation from standard EMA to your choice of SMA, EMA, WMA, or HMA. Very interesting results! Adjust lookback from standard/suggested 13 candlesticks Added a color indication to positive or negative force reading Added background color tint for an easier read on dashboard setups Suggested pair with my On Balance Volume with Cross to use as a filter & entry/exit setup. Enter or exit trades when the two indicators switch at the same time or within 1-2 candlesticks of each other.

Indicator

MACD exit % indicator Introduction An exit indicator for MACD, good for triggering order exit via MACD. It works by considering and the . Then, it just exits when the % change in these values surpasses a threshold. Indicators blue line - MACD orange line - Signal green/red columns - Histogram aqua background - Last Histogram Flip fuchsia background - Max abs(Histogram) value after last flip orange Background - Exit region

Indicator

Z Score Enhanced Time Segmented Volume (Multi MA)**THIS VERSION HAS BEEN STANDARDIZED WITH A Z SCORE CALCULATION AND ALLOWS THE USER TO SELECT WHICH MOVING AVERAGE THEY WOULD LIKE TO UTILIZE FOR THE SIGNAL LINE** Chart shows the Non-Standardized Enhanced Time Segmented Volume (Multi MA) with default settings on top and the Standardized version with default settings on the bottom. Time Segmented Volume was developed by Worden Brothers, Inc to be a leading indicator by comparing various time segments of both price and volume . Essentialy it is designed to measure the amount of money flowing in and out of an instrument. Time Segmented Volume was originally ported to PulseWire by user @liw0 and later corrected by user @vitelot. I never quite understood how to read Time Segmented Volume until I ran across a version by user @storma where they indicated when price would be long or short, but that code also utilized the incorrect calculation from user @liw0. In an effort to make Time Segmented Volume more accessible and easier to read, I have re-coded it here. The calculations are based on the code from @vitelot and I have added direction indicators below the chart. If the histogram (TSV) is greater than zero and greater than the moving average, price should be moving long and there will be a green box below the chart. If TSV falls below the moving average while still being greater than zero, the trend may be exhausting and has been coded to read Price Action Long - FAILURE with a black x below the chart. If the histogram (TSV) is less than zero and less than the moving average, price should be moving short and there will be a red box below the chart. If TSV rises above the moving average while still being less than zero, the trend may be exhausting and has been coded to read Price Action Short - FAILURE with a black x below the chart. At times, the moving average may be above zero while TSV is below zero or vice versa. In these situations the chart will indicate long or short based on whether or not TSV is greater or less than zero. It is possible a new trend may be forming as the moving average obviously lags, but also possible price is consolidating with little volume and causing TSV to oscillate close to zero. **Z Score // Standardized Option ** Thist Standardized code implements all of the above but also allows the user to select a threshold level that should not need to be adjusted for each instrument (since the output is standardized). If the TSV value meets the long and short signal requirements above and TSV is greater than the threshold values a green or red box will print ABOVE the oscillator. The histogram will also change color based on which threshold TSV has met. This calculation allows us to compare current volatility to the mean (moving average) of the population (Z-Length). The closer the TSV Z-Score is to the mean, the closer it will be to the Zero Line and therefore price is likely consolidating and choppy. The farther TSV Z-Score is from the mean, the more likely price is trending. The MA Mode determines the Moving Average used to calculate TSV itself. The Z-Score is ALWAYS calculated with a simple moving average (as that is the standard calculation for Z-Score). The Threshold Levels are the levels at which TSV Z-Score will change from gray to yellow, orange, green ( bullish ), or red ( bearish ). Statistically speaking, confidence levels in relation to Z-Score are noted below. The built in Threshold Levels are the positive and negative values for 90%, 95%, and 99%. This would indicate when volatility is greater than these values they are out of the ordinary from the standard range. You may wish to adjust these levels for TSV Z-Score to be more responsive to your trading needs 80% :: 1.28 85% :: 1.44 90% :: 1.64 95% :: 1.96 99% :: 2.58 The Z Length is the period for which the Z Score is calculated More information regarding Time Segmented Volume can be found here: www.worden.com Original code ported by @liw0 Corrected by @vitelot Updated/Enhancements by @eylwithsteph with inspiration from @storma Multiple MA Options Credits to @Fractured and @lejmer Bits and Pieces from @AlexGrover, @Montyjus, and @Jiehonglim As always, trade at your own risk.

Indicator

Enhanced Time Segmented Volume (Multi MA)**THIS VERSION ALLOWS THE USER TO SELECT WHICH MOVING AVERAGE THEY WOULD LIKE TO UTILIZE FOR THE SIGNAL LINE** Chart shows two different options of many. Top option is the default settings and bottom option is a different moving average with no other changes. Time Segmented Volume was developed by Worden Brothers, Inc to be a leading indicator by comparing various time segments of both price and volume. Essentialy it is designed to measure the amount of money flowing in and out of an instrument. Time Segmented Volume was originally ported to PulseWire by user @liw0 and later corrected by user @vitelot. I never quite understood how to read Time Segmented Volume until I ran across a version by user @storma where they indicated when price would be long or short, but that code also utilized the incorrect calculation from user @liw0. In an effort to make Time Segmented Volume more accessible and easier to read, I have re-coded it here. The calculations are based on the code from @vitelot and I have added direction indicators below the chart. If the histogram (TSV) is greater than zero and greater than the moving average, price should be moving long and there will be a green box below the chart. If TSV falls below the moving average while still being greater than zero, the trend may be exhausting and has been coded to read Price Action Long - FAILURE with a black x below the chart. If the histogram (TSV) is less than zero and less than the moving average, price should be moving short and there will be a red box below the chart. If TSV rises above the moving average while still being less than zero, the trend may be exhausting and has been coded to read Price Action Short - FAILURE with a black x below the chart. At times, the moving average may be above zero while TSV is below zero or vice versa. In these situations the chart will indicate long or short based on whether or not TSV is greater or less than zero. It is possible a new trend may be forming as the moving average obviously lags, but also possible price is consolidating with little volume and causing TSV to oscillate close to zero. More information regarding Time Segmented Volume can be found here: www.worden.com Original code ported by @liw0 Corrected by @vitelot Updated/Enhancements by @eylwithsteph with inspiration from @storma Multiple MA Options Credits to @Fractured and @lejmer Bits and Pieces from @AlexGrover, @Montyjus, and @Jiehonglim As always, trade at your own risk.

Indicator

[redxbt] MA exit modified special thanks to redxbt for the script code modified for 55,99 EMA's dip and tip points green and lime are dips for buying red and orange are tops for selling works best on 5,10 min scalping charts

Indicator

by GODFATHER711

BERLIN Renegade - Entry and Exit This is the entry and exit part of a larger algorithm called the "BERLIN Renegade". It is based on the NNFX way of trading, with some modifications. For entry, it consists of Modified Chaikin Oscillator and Advanced MACD. The Advanced MACD is not available on its own, but all others are publically available. For exit it consists of the DIDI Index and the QQE line (original idea by Jie). Special thanks to Michael Kuczynski for the idea to include the FTLM digital filter. Long signal: Green bars (upper and lower are both green) Short signal: Red bars (upper and lower are both red) Exit signal: Purple bars (bottom) - DIDI Index with QQE line

Indicator

Trend Follower - Light Mode | jh Follow up script for my Trend Follower script. I'm used to dark mode, so I coded a few key plots in white, so those are changed into black on the script. Notably: - > 1 ATR in black dots along the baseline - Current and previous ATR text labels to the right of the price - A text label spacing input that allows you to adjust the spacing for text label from price. This is a trend following system that combines 3 indicators which provide different functionalities, also a concept conceived by VP's No Nonsense FX / NNFX method. 1. Baseline The main baseline filter is an indicator called Modular Filter created by Alex Grover - www.pulsewire.com - Alex Grover - Modular Filter ------- That's the moving average like baseline following price, filtering long and short trends and providing entry signals when the price crosses the baseline. Entry signal indicated with arrows. 2. Volume/Volatility, I will called it Trend Strength The next indicator is commonly known as ASH, Absolute Strength Histogram. This indicator was shared by VP as a two line cross trend confirmation indicator, however I discovered an interesting property when I modified the calculation of the histogram. - Alex Grover Absolute Strength ------- My modification and other info here - Absolute Strength Histogram v2 ------- I simplified the display of the trend strength by plotting squares at the bottom of the chart. - Lighted Squares shows strength - Dimmed Squares shows weakness 3. Second Confirmation / Exits / Trailing Stop Finally the last indicator is my usage of QQE (Qualitative Quantitative Estimation), demonstrated in my QQE Trailing Line Indicator - QQE Trailing Line for Trailing Stop ------- Three usages of this amazing indicator, serving as : - Second trend confirmation - Exit signal when price crosses the trailing line - Trailing stop when you scaled out the second trade This indicator is plotted with crosses. Additional plots and information Bar Color - Green for longs, Red for shorts, White when the baseline direction conflicts with the QQE trailing line direction - When it's white, it's usually ranging and not trending, ASH will also keep you off ranging periods. ------- ATR Filter - White circles along the baseline, they will show up if the price has moved more than one ATR from the baseline - The default allowance is 1 ATR. ------- The previous and current ATR value - Label on the right side of the chart showing the previous and current value of ATR

Indicator

Trend Follower | jh This is a trend following system that combines 3 indicators which provide different functionalities, also a concept conceived by VP's No Nonsense FX / NNFX method. 1. Baseline The main baseline filter is an indicator called Modular Filter created by Alex Grover - www.pulsewire.com - Alex Grover - Modular Filter ------- That's the moving average like baseline following price, filtering long and short trends and providing entry signals when the price crosses the baseline. Entry signal indicated with arrows. 2. Volume/Volatility, I will called it Trend Strength The next indicator is commonly known as ASH, Absolute Strength Histogram. This indicator was shared by VP as a two line cross trend confirmation indicator, however I discovered an interesting property when I modified the calculation of the histogram. - Alex Grover Absolute Strength ------- My modification and other info here - Absolute Strength Histogram v2 ------- I simplified the display of the trend strength by plotting squares at the bottom of the chart. - Lighted Squares shows strength - Dimmed Squares shows weakness 3. Second Confirmation / Exits / Trailing Stop Finally the last indicator is my usage of QQE (Qualitative Quantitative Estimation), demonstrated in my QQE Trailing Line Indicator - QQE Trailing Line for Trailing Stop ------- Three usages of this amazing indicator, serving as : - Second trend confirmation - Exit signal when price crosses the trailing line - Trailing stop when you scaled out the second trade This indicator is plotted with crosses. Additional plots and information Bar Color - Green for longs, Red for shorts, White when the baseline direction conflicts with the QQE trailing line direction - When it's white, it's usually ranging and not trending, ASH will also keep you off ranging periods. ------- ATR Filter - White circles along the baseline, they will show up if the price has moved more than one ATR from the baseline - The default allowance is 1 ATR. ------- The previous and current ATR value - Label on the right side of the chart showing the previous and current value of ATR Adding my Didi and ASH indicators up on this screenshot Didi Index Improved with QQE

Indicator

Mirror MACD by Trader Jay This is my take on the metatrader indicator, the mirror macd. Works pretty good on Forex, haven't tested on anything else Enter long after the Blue Line Cross Up the Red Line and EXIT after the Green line Cross Up the Red Line (above the Blue Line). For the opposite position : ENTER SELL after the Red Line Cross Down.

Indicator

by jaymaynard84

QQE Trailing Line for Trailing Stop | jh Using parts of QQE (Qualitative Quantitative Estimation) again, this time I'm applying the trailing line of QQE on price directly. Outcome, it's behaving like a baseline filter and it can be use as an exit or a trailing stop indicator. As comparing to Kijun-sen line in yellow, the QQE trailing line follows the price closer, therefore exiting you sooner when the trend direction changes. There's 2 QQE option, they behave differently during the trend change. Credits to Glaz and Shizaru for their QQE code.

Indicator

SSL [dasanc]The SSL is a fair entry condition and good exit indicator. It works best when combined with a trend indicator and multiple confirmations. In essence, the SSL is a moving average crossover, which immediately down-grades it to a 2nd or 3rd level of confluence in my opinion. It was recently featured in an episode of VP's "No Nonsense FX", which drove me to recreate the original MT4 indicator in PineScript. I have two ideas on how to improve it - Use a much faster moving average calculation method (check out my Ehlers scripts) Use a longer period MA on lower timeframes If you enjoy/use this script, drop me a follow and please note me in your code! I'm *almost* always available for collabs and questions

Indicator

Chandelier Exit This is a redesign of the Chandelier Exit indicator. It removes stupid transitions between Chandelier Exit' states and highlights initial points for both lines. This indicator was originally developed by Charles Le Beau and popularized by Dr. Alexander Elder in his book "Come Into My Trading Room: A Complete Guide to Trading" (2002). In short, this is a trailing stop-loss based on the Average True Range (ATR).

Indicator

LINEdicator - Trendanalysis tool This indicator creates an trend channel based on an EMA/SMA combo and a Parabolc SAR indicator. Watch for the peaks and the size of the red/green channel for possible trend change. Can also be used as an Entry/Exit/Stop-Loss setting tool.

Indicator

CCI Cycle (Modified Schaff Trend Cycle)This is a modified Schaff Trend Cycle (STC), which is designed to provide quicker entries and exits. I've been a huge fan of the STC for a long time, but being based on the MACD means its signals often lag by a bar or two (especially in fast moving markets). All I've done here is take the base STC script (all credit to user @LazyBear), and change the source to a modified CCI. The CCI Cycle provides more timely entries and exits, often by 1-2 bars. The flip side of the increased responsiveness is a prevalence for more false signals (a perfect example is the 17th August on the above chart). It's the nature of the beast! Still, I've been using this for a few months now and it's (in my opinion) an upgrade on the standard STC. As always, you will need to pair this with another indicator or method of technical analysis to provide a trade bias, as the CCI Cycle (and STC) aren't designed to trade every signal. In my experience, either divergence identification, or using one or more moving averages works particularly well. The indicator is also MTF capable, so you can get some interesting results from that. Any queries let me know. DD

Indicator

by DreamsDefined

HiLo Hi Everyone, Do you guys know how can I add an exit strategy to this hilo. I would like it to exit either with hilo invertion (already does) or with profit/loss (it doesn't work) Thank you

Strategy

by HelderAraujo

TF Entry and Exit (Murrey Based)TF Entry and Exit (Murrey Based) with Alerts

Indicator

Chandelier Stop A modified verion of the Chande & Kroll's Stop indicator.

Indicator

In-depth global business and economic analysis Comprehensive trading education and market insights