Liquidity Heatmap 3D - Volume Density POC CVDLIQUIDITY HEATMAP 3D — the order-flow heatmap look, rebuilt for PulseWire.
This indicator brings the volume-density heatmap visual to any PulseWire chart, with a twist no other heatmap here has: a real 3D relief shader. Instead of flat colour tiles, every cell is lit by a virtual light source (emboss lighting computed in the colour math), and the strongest liquidity walls extrude as 3D blocks with shaded side faces and lit top caps.
━━━ HOW IT WORKS ━━━
PulseWire provides no order book and no historical tick data, so this is an honest volume-density heatmap: each bar's volume is distributed across the price zones its range covered. Dense zones are the liquidity walls where the market actually spent volume. The engine normalises against the 85th percentile of the column maxima, so one hot spike never blanks out the rest of the map.
━━━ WHAT IS ON THE CHART ━━━
· Heatmap grid up to 22 x 28 zones, rebuilt live on every bar
· 3D RELIEF SHADER — emboss lighting, specular glints on the wall tops, adjustable strength
· 3D WALL EXTRUSION — the strongest cells pop out as shaded blocks (toggle)
· 7 PALETTES — GOLD 3D (default), TWILIGHT, FIRE & ICE (buy/sell split), OCEAN, INFERNO, EMERALD, MONO
· POC LINE — the highest-volume price of the window, with its volume readout
· WALL DETECTION — the two strongest active liquidity walls, labelled with their strength in percent
· VOLUME PROFILE — profile bars on the right, POC highlighted in gold
· TRADE BUBBLES — volume-spike bubbles sized by their ratio against the average, buy blue / sell magenta
· CVD STRIP — cumulative volume delta (bar proxy) along the bottom, mint and red
· COCKPIT PANEL — engine checklist, POC box and a BUY / SELL flow signal line
· Optional dark chart theme: navy background with mint / red bars
━━━ HOW TO USE IT ━━━
1. Watch the golden walls: price often reacts at dense volume zones — support and resistance built by traded volume rather than by drawn lines.
2. The POC is the fairest price of the window and acts as a mean-reversion magnet in ranges.
3. CVD rising while price holds a wall below it is an absorption long idea; CVD falling at a wall above is a distribution short idea.
4. Bubbles mark the bars where outsized volume hit. Combine them with wall touches for confluence.
━━━ SETTINGS ━━━
Grid size, bars per column, cutoff, gamma, tile transparency, relief strength, wall threshold and bubble threshold are all adjustable. Works on every symbol and timeframe; if a symbol carries no volume the engine falls back to time-at-price density and says so in the panel.
━━━ HONEST LIMITS ━━━
This is not level-2 order book data — PulseWire does not provide it. The map shows where volume actually traded, not resting limit orders. The 3D effect is a rendering technique, not extra data.
━━━ NOTE ON LOADING ━━━
Right after adding the indicator, or after changing a setting, give it a few seconds: the engine creates its object pools and runs the first build. A brief flicker during that warm-up is normal and stops once the first refresh is done. After that the persistent engine updates in place with no flicker.
Open source — read it, change it, learn from it. This indicator is a study tool, not financial advice.
WHY THESE PARTS BELONG TOGETHER
The heatmap, the point of control and the cumulative delta strip are three views of one question:
where is volume sitting, which price is defending it, and who is doing the trading. The heatmap
shows the distribution, the point of control marks its centre of gravity, and the delta strip says
whether that distribution is being built by buyers or sellers. Read on their own each of the three
is ambiguous; read together they describe one order-flow picture.
Indicator
Market Profile VPOC Breakout - Imbalance SignalsA breakout setup does not fail because the setup is bad. It fails because it was taken in the wrong market phase. Roughly 70 % of the time price is INSIDE the higher-timeframe balance — inside fair value — and there a breakout has almost no edge. In the remaining ~30 %, when the market is OUT OF BALANCE, the identical trigger becomes one of the highest-probability trades there is. That combination shows up about ONCE PER DAY.
Market Profile VPOC Breakout automates that location-first workflow end to end: weekly and daily volume/TPO profiles, the value areas, the VPOC sequence, the transferred prior-day value-area edge, single prints, the P / b micro-profile proof, the entry trigger, the risk model and ready-to-use webhook JSON — all on one chart, with an explanation attached to every single object.
═══════════════════════════════
THE 7 CONFIRMATIONS
═══════════════════════════════
The panel walks you through them live, top to bottom, and nothing below step 1 matters while the market is in balance.
① WEEKLY LOCATION — the previous week's value area is the equilibrium. Price inside it = the 70 % phase → stand down. Price above VAH or below VAL = imbalance → hunt. The shaded zone on the chart is that balance; the background wash tells you at a glance which phase you are in (mint = imbalance up, red = imbalance down, gold = balance).
② EQUILIBRIUM TEST + REJECTION — the week opened outside the balance, price came back to TEST the weekly value area and was aggressively traded away from it again. That rejection is the proof that the market no longer wants to be in equilibrium.
③ TREND OF EQUILIBRIUM — the sequence of daily VPOCs. Rising VPOCs mean fair value itself is migrating up: the distribution of the participants' equilibrium is trending, which is exactly what a fast trade WITH the trend needs. Flat or overlapping VPOCs = balance = no trade. Drawn as a staircase over the session VPOCs.
④ PRIOR-DAY VALUE AREA BREAK — the previous session's value-area edge is transferred onto the execution timeframe as a thick green line. Price has to ACCELERATE through it, not drift.
⑤ SINGLE PRINTS — the indicator reads the running session's TPO grid and counts price rows that only ONE bar ever touched. Those rows are marked as a cyan SINGLE PRINT zone: the market moved so fast that no business was done there = aggressive buyers or sellers, not passive rotation.
⑥ P / b MICRO SHAPE — the micro profile of impulse + the small balance that forms on it is measured. POC in the upper part = P (aggressive buyers shifting equilibrium up) → long. POC in the lower part = b (sellers shifting it down) → short. A symmetric D is skipped. This is the P/b/D profile-shape logic used by two-time World Cup Championship of Futures Trading winner Patrick Nill.
⑦ TRIGGER — two variants, both switchable:
• BREAK-IN — price dips back into the P/b balance and is instantly bought / sold again (the aggressive, earlier entry, trend-continuing).
• BREAKOUT — a CLOSE beyond the balance edge with a higher (long) or lower (short) close. Never a wick.
═══════════════════════════════
RISK MODEL
═══════════════════════════════
Stop behind the structural invalidation (micro-balance edge, impulse origin or the reference level) plus an ATR buffer. TP1 in R multiples moves the stop to break-even, TP2 lets the runner work. And the rule that keeps this model alive: a TIME STOP. If the move does not run within N bars, get out — a failing breakout reverses just as fast as it was supposed to run. Risk and reward are drawn as blocks so the geometry is readable at a glance. One signal per session by default, because the model only exists about once a day.
═══════════════════════════════
WHAT IS ON THE CHART
═══════════════════════════════
• Session volume/TPO profiles with value area, VPOC and shape letter (P / b / D)
• Naked VPOC rays that keep running right as magnets
• Weekly profile + the prior-week balance zone projected into the current week
• The thick green transferred value-area edge with its own explanation
• Daily VPOC staircase and the imbalance gauge in the panel
• Single-print zones, micro-balance boxes with the big P / b letter
• BUY / SELL pills, the full numbered reason stack printed next to the signal, entry / SL / TP1 / TP2 rails, risk and reward blocks, TP / SL / BE / TIME exit tags
• A permanent BEGINNER CARD on the chart plus a HOW TO READ manual — every pill, zone, rail, letter and panel row also has its own hover explanation, so nothing on this chart is unexplained
• Two colour modes: Design (navy, mint / cyan / gold) or Original TPO (the classic grey market-profile look with red VPOC rays and a white profile curve)
═══════════════════════════════
AUTOMATION
═══════════════════════════════
Create ONE alert with the condition "Any alert() function call" and paste your webhook URL. Every BUY, SELL, TP1_HIT, TP2_HIT, SL_HIT, BE_EXIT, TIME_STOP and ARMED event posts ready-to-use JSON containing id, symbol, action, setup, shape, qty, price, entry, sl, tp1, tp2, pdvah, pdval, timeframe and time — connect it to any bridge or bot without touching the code. Separate alertconditions for BUY, SELL and "any signal" are also available.
═══════════════════════════════
HOW TO USE IT
═══════════════════════════════
Built for an intraday execution timeframe: 1m to 15m, exactly like the original workflow (locate on the weekly and daily profiles, execute on a 1-minute chart). Index futures and index CFDs are the natural home (NQ, ES, DAX, Nikkei), but the profile engine derives its bin size from the average daily range, so gold, FX and crypto work out of the box. For index futures switch on "cash session only" and set the exchange session so the overnight trade does not smear the profiles.
Every input is documented with a tooltip that explains what it does and why it exists. Start with the defaults, then loosen step 2 or step 3 if you want more signals — and be aware that every filter you switch off moves you back towards the 70 % phase where this trigger simply does not pay.
═══════════════════════════════
NOTES
═══════════════════════════════
The entry logic is mechanical and reproducible. Stop distances, targets and the time stop are parameters, not gospel: size them to the instrument you trade. Profiles are built from the bars of the chart you are on, so a finer timeframe gives a finer profile. Hit rates quoted in the educational material behind this model refer to the full workflow including discretionary session context — treat the signals as a structured, disciplined framework, not a guarantee, and always validate on your own data before risking capital.
Open source. Feedback and improvement ideas are welcome.
WHY THESE PARTS BELONG TOGETHER
The point of control and the breakout trigger are combined because a breakout setup does not fail
because the setup is bad, it fails because it was taken in the wrong market phase. The VPOC locates
that phase: a break away from a freshly built point of control is a different trade from a break
back into an old one. The imbalance measurement is the third piece - it tells you whether the move
away from the VPOC was one-sided enough to be worth following.
Indicator
Volume Profile P b D Shapes - Day PlaybookVOLUME PROFILE P b D SHAPES reads the market's body language: every trading day the volume profile prints a LETTER — P, b or D — and that letter tells you who is in control and exactly how to trade the next session. This indicator automates the complete PbD method: it builds every day's volume profile, classifies the shape, draws the levels, prints the playbook on your chart and fires webhook-ready JSON signals.
■ THE THREE LETTERS
P-SHAPE (bullish continuation) — fast impulse UP, then balance ON TOP. The thin tail below is single prints: nobody did business there. Buyers feel like winners, dips are for buying.
b-SHAPE (bearish continuation) — fast impulse DOWN, then balance AT THE BOTTOM. The thin tail above marks the drop. Sellers are in control, rallies are for selling.
D-SHAPE (balance day) — a symmetric bell curve with a fat POC in the middle. Buyers AND sellers are happy, fair price has been found. The next day usually stays range-bound: fade the edges.
■ THE AUTOMATED PLAYBOOK (7 SETUPS)
P behind you:
- PLAN A — CONTINUATION: price dips into yesterday's value area, the dip HOLDS (no low break), a reclaim candle closes back at/above the POC -> BUY. Targets: previous high, then a measured balance move.
- PLAN B — FAILURE = FULL TRAVERSE: 2+ candle CLOSES below the VAL (a wick is NOT enough) plus a volume spike = acceptance below balance. The shape has failed and price tends to walk the WHOLE way back to the impulse origin -> SELL.
b behind you: the exact mirror — sell failed rallies into value (Plan A), or buy the failure traverse when 2+ closes above VAH with volume appear (Plan B).
D behind you + today opens INSIDE the D:
- Range rules. Short the Value Area High rejection, long the Value Area Low rejection, target the POC first and the opposite edge second. The FIRST touch gives the best response — the fade counter limits how often each edge may be traded.
■ WHAT YOU SEE ON THE CHART
- A volume histogram for every completed day, colored by its letter (mint P / red b / gold D), POC row highlighted
- A big P / b / D letter above each day — hover it for the full lesson behind the shape
- Yesterday's VAH / VAL / POC projected into today as live rails with explanatory tooltips
- A bias note at every day open: which letter is behind you, where today opened, and both plans
- Two-line BUY/SELL pills that explain WHY the signal fired (hover for the complete reasoning + Entry/SL/TP1/TP2)
- Entry / SL / TP1 / TP2 lines, TP1 -> break-even management, TP2 runner
■ AUTOMATION / WEBHOOK
Create one alert with condition "Any alert() function call" and paste your webhook URL. Every BUY/SELL/TP1/TP2/SL/BE event sends ready-to-use JSON: id, symbol, action, setup, shape, entry, sl, tp1, tp2, timeframe, time. There is also an optional end-of-day SHAPE alert so your bot can pick tomorrow's playbook automatically.
■ HOW TO USE
1) Apply to an intraday chart (5m - 1h; crypto, indices, FX, stocks). 2) Let at least one full day close so the first letter prints. 3) Read the panel: previous-day letter -> today's bias -> checklist. 4) Take the pills or automate them via webhook. The first day on the chart only collects data — letters start from day two.
Educational note: shapes give a BIAS, not a guarantee — that is exactly why every setup ships with both Plan A and Plan B. Not financial advice.
WHY THESE PARTS BELONG TOGETHER
The volume profile and the shape classification are inseparable here. The profile alone tells you
where volume accumulated; the classification into P, b and D shapes is what turns that distribution
into a statement about who is trapped and where the day is likely to go. A P shape and a b shape can
contain identical volume and mean the opposite thing - which is only visible once the profile is
read as a letter rather than as a histogram.
Indicator
Impulse Box Breakout Engine - Origin Range Buy Sell SignalsIMPULSE BOX BREAKOUT ENGINE — a complete breakout trading system in one indicator: self-adjusting impulse boxes with entry arrow, stop, two fixed targets, a pink trailing-stop dot line and webhook automation. Rebuilt 1:1 from a professional German "Impulsbox" breakout engine (72-minute source webinar, analyzed frame by frame) and redesigned as a modern cockpit indicator.
█ WHAT IT DOES
The engine meters the market N bars back: the range the market traded in PLUS the length of every single bar inside it (compression check). When a STRONG impulse bar closes outside that range, the IMPULSE BOX appears over the consolidation:
• CYAN BOX = long breakout — big entry arrow inside the box
• GOLD BOX = short breakout — mirrored to the downside
• Initial stop = the far side of the box (bottom for longs, top for shorts)
• TARGET 1 + TARGET 2 (violet marks) are projected from the box height the moment the box appears — FIXED, never repainted, never moved afterwards
• PINK DOTS = the trailing stop. It starts at the box edge and follows price with ~30% of the move as breathing room. It only ratchets in your favor — never back
• At Target 1 the stop jumps to break-even or better. After Target 2 the system follows the source rule: "never leave the market voluntarily — let the stop take you out"
█ SELF-OPTIMIZING ENGINE
Markets are sideways ~80% of the time — rigid breakout parameters fail there. This engine adapts automatically:
• TREND regime (ADX based): short lookback, wider targets (+35% / +100% of box height)
• RANGE regime: longer lookback, stricter impulse filter, closer targets (+25% / +75%)
• AUTO-RECALIBRATION: after a false breakout the impulse threshold is raised temporarily — fewer but cleaner boxes. A winning box resets it
• The cockpit shows the current regime, calibration and effective parameters at all times
█ HONEST LIVE STATISTICS
The cockpit counts every box on your chart and shows the real Target-1 and Target-2 hit rates — no marketing numbers, live counted on your symbol and timeframe. On XAUUSD 15m the default engine printed 500+ boxes with a T1 hit rate above 90% at the time of publishing (past performance never guarantees future results).
█ DIRECTION BIAS FILTER
The #1 rule of the source system: trade boxes only in the direction of the higher-level move. The indicator automates this via EMA-200 + Supertrend bias. Choose: Off / Mark counter-bias boxes (dimmed + warning) / Filter them out completely. Supertrend companion arrows are included as extra confluence.
█ EVERY SIGNAL EXPLAINS ITSELF
Hover any BUY/SELL pill: how many bars of consolidation, how strong the impulse bar was (x average bar), which range edge broke, which regime the engine was in, whether the box agrees with the bias — plus entry, stop and both targets. No black box.
█ WEBHOOK AUTOMATION (BOTS / BRIDGES)
Create ONE alert with "Any alert() function call" and your webhook URL. The indicator fires ready-to-use JSON on BUY, SELL, T1_HIT, T2_HIT, TRAIL_EXIT and SL_HIT — including entry, stop, both targets, box levels, regime and live hit rates. Works with any webhook bridge, bot or auto-trader.
█ HOW TO USE
1) Add to chart — works on ALL symbols and ALL timeframes (crypto, gold, forex, indices, stocks)
2) Use standard candles or OHLC bars (Heikin-Ashi smoothing swallows breakouts — a key finding of the source webinar)
3) Wait for a box + arrow, entry at the breakout close, stop at the far box edge
4) Take partial profit at Target 1, let the rest run with the pink trailing dots
5) Automate via webhook JSON if you want
█ SETTINGS
Everything is configurable: manual mode with fixed lookback/impulse strength, target distances, trailing gap, exit-at-T2 mode, bias filter mode, Supertrend, chart theme, cockpit position and all alert toggles.
Educational tool only — not financial advice. Trading involves substantial risk. Always test on a demo account first and never risk money you cannot afford to lose.
WHY THESE PARTS BELONG TOGETHER
The impulse detection and the box are one mechanism, not two features. The impulse identifies the
candle sequence that moved the market; the box freezes the range that impulse came out of, because
that range is the level the market has to defend for the move to continue. Detecting impulses
without marking their origin gives you a signal with no invalidation, and drawing boxes without an
impulse gives you consolidation zones with no direction.
Indicator
Opening Range Breakout Engine - Session Range SignalsaDESCRIPTION:
RANGE BREAKOUT PRO is a complete range-breakout trading engine: it detects tradeable ranges from confirmed swing pivots, fires BUY and SELL signals when price breaks out in the direction of the trend, and then manages every trade on the chart with entry, stop loss, take profit, break-even and trailing logic - all fully visualized and fully automatable via webhook alerts.
HOW THE ENGINE WORKS
1. RANGE DETECTION - Confirmed swing highs and swing lows (pivot length configurable) become the active RANGE HIGH and RANGE LOW. Each extreme is marked on the chart with a dot and a vertical marker line. A range must be wide enough (minimum height in ATR) and fresh enough (maximum age in bars) to be tradeable - micro-ranges and stale levels are skipped automatically.
2. BREAKOUT SIGNAL - A signal fires only when a candle CLOSES beyond the range extreme plus an ATR buffer (no wick fake-outs), the gradient trend ribbon points in the breakout direction, the trend strength score clears your Buy/Sell Strength threshold, the breakout is not overextended (max distance from the ribbon in ATR - no chasing exhausted moves), and an optional cooldown after a losing trade has expired. Optional MTF Agreement requires the 15-minute trend to confirm.
3. TRADE MANAGEMENT - Every signal is managed like a real trade, live on the chart:
- TP1 (partial target) banks the win early and moves the stop to break-even
- the remainder runs to the full R-multiple take profit or a chandelier trail
- green TP box and red SL box grow bar by bar from the entry, exactly like a position tool
- price tags at the right edge show Entry, Stop Loss, Take Profit and live Profit/Loss %
- every closed trade is marked with a tick (win), circle (break-even) or cross (loss)
4. TWO TRADE MODES - "TP/SL Mode" (fixed targets, split TP1 + runner) or "Trailing Mode" (no fixed target, the trail line is the moving stop).
THE COCKPIT PANEL
- MARKET OVERVIEW: multi-timeframe trend dashboard - live trend strength meters for the chart timeframe, 15m, 1H, 4H and 1D
- SIGNAL SETUP: entry system, MTF agreement, current signal (Long / Flat / Short), Buy/Sell strength thresholds, trend filter state, trade mode, active Take Profit and Stop Loss levels
- PERFORMANCE: asset, exchange, timeframe, total trades and live win rate calculated from every signal on the chart history - no cherry picking, the counter runs over everything the engine fired
Win rate accounting is transparent: a trade counts as WIN when TP1 is banked, as LOSS when the initial stop is hit first, and break-even exits are tracked separately - the same split-target accounting professional scalpers use.
WHY-EXPLANATIONS ON THE CHART
Every BUY/SELL pill carries a tooltip that explains WHY the signal fired: which range level broke, the trend strength at the trigger, entry, stop and target prices. Range dots explain the level they mark. Nothing is a black box.
WEBHOOK AUTOMATION
Create one alert with condition "Any alert() function call" and paste your webhook URL. The indicator sends ready-to-use JSON for every event: BUY, SELL, TP_HIT, SL_HIT, TRAIL_EXIT, BE_EXIT - including symbol, price, stop, target, trade mode, win rate and timeframe. Connect it to any bridge or bot and the strategy runs hands-free.
WORKS ON
Any symbol and timeframe: indices (NASDAQ, S&P, DAX), gold and forex, crypto, stocks. Scalping on 1-5 minute charts, day trading on 15m-1H, swing trading on 4H-Daily. Defaults are tuned for intraday breakout scalping.
DISCLAIMER
This indicator is a technical analysis tool, not financial advice. Past win rates do not guarantee future results. Always test on a demo account first and manage your risk.
WHY THESE PARTS BELONG TOGETHER
An opening range on its own produces a break in both directions on most days. The session filter
and the range-quality measurement exist to decide which of those breaks is tradeable: the session
defines when the range is allowed to form, and the quality measurement rejects ranges that are too
wide or too thin to hold. The breakout level is only meaningful once both have passed.
Indicator
TL Space Concept Pro - Three Finger Spread Breakout EngineSPACE CONCEPT PRO - THE THREE-FINGER SPREAD ENGINE
Some of the most consistent discretionary traders never look at a chart without two moving averages on it: the 20 SMA and the 200 SMA. Add price itself and you have THREE ITEMS - three "fingers". The distance between them is called SPACE, and space tells you when a market is about to explode and when a move is about to die. This indicator turns that entire concept into a fully mechanical engine with signals, trade management and webhook automation.
=== THE CONCEPT ===
THE THREE ITEMS
1. Price
2. The 20 period simple moving average
3. The 200 period simple moving average
NARROW STATE - all three items clustered together. The market has reset itself. An explosive move is loading, direction unknown. You do not need to predict it: you simply wait for the biggest bar to emerge.
SPACE ZONE 1 - the space between the 20 SMA and the 200 SMA.
SPACE ZONE 2 - price accelerating away from the 20 SMA. Sometimes the underlying moves faster than the moving average can keep up, creating a second layer of space.
DUAL SPACE / THREE-FINGER SPREAD - both zones open at the same time, all three fingers clearly separated and stacked in order. This is where moves get exhausted.
THE RAILROAD RULE - if price runs parallel to the 20 SMA like railroad tracks, that is NOT a spread. Price has to ACCELERATE away from the moving average. The engine checks this automatically.
THE WIDEST SPREAD - the widest three-finger spread of the lookback window finds you the temporary top or bottom 8 to 9 times out of 10. When it prints, the reversal watch arms and the extreme that must hold is marked on the chart.
NARROW TO NARROW - when the spread collapses from the widest state back to narrow WITHOUT breaking the extreme, the next direction is the reversal. Confirmed by a power bar: a three-finger spread reversing with a power bar is the creme de la creme of this method.
=== THE SIGNALS ===
1. BREAKOUT - power bar (biggest bar of the window) exploding out of a narrow state. Entry inside the bar, stop beyond the bar.
2. SPREAD REVERSAL - widest spread found the extreme, spread collapsed back toward narrow without breaking it, power bar confirms. Target follows the 50 percent rule.
3. EARLY REVERSAL - first strong color change directly at the widest spread (the bottoming tail bar play). Stop beyond the extreme.
4. TAIL BAR - optional: bottoming/topping tail bars near narrow states as early entries (markers by default).
Every signal prints as a two-line pill with the setup name, and every pill carries a WHY tooltip that explains the exact chain of logic behind the trade - plus entry, stop, target and R:R.
=== TRADE MANAGEMENT (AS TAUGHT) ===
- ADD on the first color change after entry ("always adding on the first color change")
- TP at the 50 percent mark of the move - the pros are satisfied with the halfway mark, do not get greedy
- After the partial: bar-by-bar trailing stop until the market takes you out
- Hard stop beyond the power bar / spread extreme with an ATR buffer
- Full position box and live status in the cockpit panel
=== THE COCKPIT ===
An animated terminal-style panel shows everything at a glance:
- Animated 3D gold pixel logo with a moving light sweep (live ticks)
- State chip: NARROW STATE / 3-FINGER SPREAD / WIDEST SPREAD / REVERSAL WATCH
- Spread rank 0-100 plus live ZONE 1 / ZONE 2 meter bars in ATR
- 7-step SPACE CHECKLIST mirroring the method: items stacked, zone 1, zone 2, acceleration (railroad filter), widest-spread watch, power bar, management
- Position box, big signal line, spread/reset/signal counters
On the chart: shaded zone 1 and zone 2 fills, narrow-state boxes, MARKET RESET tags, 3-FINGER SPREAD labels, gold WIDEST SPREAD stars with vertical measuring lines (exactly how it is drawn when taught), the must-hold extreme line, TAIL tags and lightning power-bar markers. Everything is explained on the chart - hover any label for the reasoning.
=== AUTOMATION / WEBHOOK ===
Create ONE alert with condition "Any alert() function call" and paste your webhook URL. The indicator sends ready-to-use JSON for every event:
{"id":"TL-SPACE-CONCEPT","symbol":"BTCUSD","action":"BUY","setup":"BREAKOUT","price":64100.5,"sl":63900.0,"tp":64500.0,"tf":"15","time":"2026-07-18 16:30"}
Actions: BUY, SELL, ADD, TP_50, TRAIL_EXIT, SL_HIT, NARROW_STATE, WIDEST_SPREAD. Classic alertconditions for BUY / SELL / Narrow State / Widest Spread are included as well.
=== SELF-CALIBRATING ===
The spread is ranked against its own history (percentile engine) and all distances are measured in ATR - so the indicator works out of the box on any market (crypto, forex, gold, indices, stocks, futures) and any timeframe from 1 minute to weekly. Practice finding three-finger spreads everywhere - that is the homework.
=== SETTINGS ===
Every input is documented with a tooltip quoting the original rule it implements. Adjust the narrow/wide percentiles, power-bar size, dual-space minimum, acceleration window, 50 percent rule targets and the SL buffer to fit your market and style.
=== DISCLAIMER ===
Educational tool, not financial advice. No indicator wins every trade - prepare for the 1-2 times out of 10 the concept is wrong: keep your risk unit small compared to your profit unit. That is how you stay in business.
Indicator
Daily Range Exhaustion - ADR Probability MapAn intraday trader spends the whole session asking one question without ever measuring it: is there still room left in this move, or is the day already finished. Daily Range Exhaustion measures it.
The script records the completed range of every past day on the symbol you have open, and uses that sample to answer four things about the day in progress.
HOW MUCH OF THE DAY IS SPENT
Today's range is compared against the average daily range of the last 5, 10 or 20 days. The panel shows the result as a percentage. At 40 percent the day still has room in either direction. At 110 percent the day has already delivered more than an ordinary day and every further extension is, statistically, an outlier rather than the base case. The chart background tints once 100 percent is passed.
WHERE A FULL DAY COULD STILL REACH
Two levels are drawn:
Upside projection, today's low plus the average daily range. This is the highest point a statistically ordinary day could still print without becoming unusual.
Downside projection, today's high minus the average daily range.
Both compress as the session develops. Early in the day they sit far apart. By the afternoon they have squeezed toward price, and the distance left to each one is exactly the room the day has left. The shaded areas between price and each projection are that remaining room, made visible.
THE ODDS OF EXTENDING ANYWAY
Ranges are not a hard ceiling, so the panel reports how often the ceiling actually broke. Three lines show the share of past days whose range exceeded 100, 125 and 150 percent of the current average. On most liquid instruments roughly a quarter to a third of days exceed 100 percent, but far fewer reach 150 percent. Those numbers are the honest context for the exhaustion reading: they tell you whether a stretched day is rare or routine on this particular symbol.
WEEKDAY BREAKDOWN
A single average across all days hides a real effect. Many instruments have a quiet Monday and a violent Thursday, and judging Monday against a blended average will make it look exhausted when it is behaving normally. The panel breaks the sample down by weekday, shows the average range of each one, and expresses it as a percentage of the overall average. Today's weekday is highlighted.
HOW TO USE IT
As a filter on entries. Taking a fresh breakout when the day has already spent 120 percent of its average range is a different trade from taking the same breakout at 45 percent. The setup may be identical, the room available is not.
As target context. If the upside projection is 12 points away and your target is 30 points, the day would have to become a statistical outlier for that target to fill.
As mean reversion context. A day that hits the projection level and stalls has, by definition, reached the edge of its usual distribution.
As session planning. Check the weekday row before the session opens to know whether to expect a wide day or a narrow one.
NOTES ON THE DATA
The sample is built from the chart itself, so it needs history loaded. The panel shows a Building sample message and stays hidden until the minimum day count is reached, rather than showing statistics based on six observations.
Only intraday timeframes are supported. On a daily chart or higher the concept has no meaning, and the panel says so instead of printing misleading numbers.
Older days are dropped once the sample cap is reached, so the statistics follow the current volatility regime instead of averaging in a market from two years ago.
Days are bounded by the exchange session of the symbol. On instruments that trade nearly around the clock the day boundary is a convention, not a natural break, which slightly inflates the ranges of days that straddle a rollover.
WHAT IT IS NOT
There are no entry or exit signals here, and none are planned. This is context. A completed range is not a reversal signal, and an unfinished range is not a reason to expect continuation. Trends routinely spend two or three average ranges in a session, which is precisely why the extension odds are shown rather than hidden.
This is an analysis tool, not financial advice. Past distributions do not guarantee future ones. Use it alongside your own risk management and position sizing. Indicator
Indicator
Indicator
Smart Money Volume Absorption Signals I EonMetricsSmart Money Volume Absorption Signals
Volume Absorption marks a specific situation as a LONG or SHORT setup, with an entry, a stop and two targets. But instead of only printing an arrow and leaving you to reconstruct what happened, it tracks that setup through four stages and shows you exactly how far along it is — how many conditions are met, which one is still missing, how many bars are left before the setup is discarded, and what the same sequence has already done on the history your chart has loaded.
🔶 THE SITUATION IT TRACKS
A bar trades far more volume than its own recent normal, and then closes at the wrong end of its own range. Heavy participation that failed to pay the side that pushed: effort without result. The direction is set against the side that was absorbed — a heavy bar closing in the bottom third of its range is a short premise, one closing in the top third is a long premise.
One thing has to be said plainly, because it decides how much weight this premise deserves: total volume cannot tell you who traded. It cannot separate buyers from sellers. What this gate actually measures is heavy participation combined with a failure to hold the direction the bar travelled. The absorption reading is an interpretation of that pattern, not a measurement of order flow. If you want that distinction to matter less, the remaining three gates are where the work is done.
Absorption on its own happens constantly and most of it leads nowhere. So the tool requires three further confirmations, in order, before it marks anything.
🔶 THE FOUR GATES
G1 · ABSORPTION — bar volume lands in an extreme percentile of its own recent history while the bar closes in the far third of its own range. This gate fixes the direction and nothing later can change it. It also plants the invalidation anchor at that bar's extreme. Optionally the direction must agree with a slow trend filter.
G2 · REACTION — a following bar closes in the direction G1 set. The absorption produced something instead of merely stalling.
G3 · EXPANSION — a candle body in the top percentile of its own recent history, pointing the setup's way. That candle's OPEN becomes the origin level, and the origin level is where entry would be.
G4 · HOLD — price returns to the origin level and closes without violating it. Only now does the signal print, on bar close.
This is a retest model, not a breakout model, and the consequence is worth stating before you use it. A setup whose expansion runs away and never comes back to the origin level will never complete, no matter how far the move goes. You will see setups sit at 3/4 while price travels past the drawn targets, and then expire. That is the design working as intended — the entry is the retest — but if you want a tool that chases the move instead, this is not that tool.
The dashboard reads: which stage the setup is in, the direction, which gate is being waited on, the expiry countdown, the entry and stop levels, and the record of every completed setup on the loaded history.
🔶 ORIGINALITY
Five design decisions separate this from a stack of conditions with an AND between them.
Percentiles instead of ATR multiples. A fixed "1.5 × ATR" or "2 × average volume" threshold means something different in a trending market than in a compressed one, so it has to be re-tuned per symbol and per period. Every threshold here is a percentile rank against the instrument's own recent history — "top 30% of the last 200 bars" keeps its meaning when volatility changes, without tuning.
Gates do not add up to a score. Each gate is a separate class of evidence and none substitutes for another. Three expansion bars in a row are still 1/4, not 3/4. A weighted-sum model can be outvoted by one loud condition repeating itself; this one cannot. There is deliberately no confidence percentage anywhere in this script — with four binary gates in a fixed sequence, the only honest information is how many of them have filled, and dressing that up as a percentage would add precision that does not exist.
The setup dies on its own. Every tracked setup carries an invalidation anchor (a close beyond the absorption bar's extreme) and a bar countdown that resets at each gate advance. When either fires, the setup is discarded immediately — it does not linger until an opposite signal replaces it, and it does not quietly stay on the books.
One setup at a time. While a completed setup is still resolving toward its target or its stop, a new setup will not complete — it waits at 3/4 and may still fire later if the first one resolves in time, or expire if it does not. This exists so that what the dashboard counts is what a person following the tool could actually have taken, one position at a time, rather than an overlapping stack of positions nobody could hold.
It shows its own record. The last two rows of the dashboard walk every completed setup on the chart you are looking at, bar by bar, and count which level price reached first — Target 1 or the stop. The stop is checked before the target, so a bar that spans both counts against the setup, and the bar the signal prints on is not counted at all. That number is whatever it is. It is not a claim, it is not tuned to flatter, and it will read differently on every symbol and timeframe you load — which is exactly the point. You are meant to check it on YOUR instrument before deciding what the tool is worth to you, instead of taking anyone's word for it. Most signal tools do not show this. That is a choice they made, and this is a different one.
🔶 HOW IT IS CALCULATED
Both percentile ranks are ta.percentrank() over one configurable window — one on bar volume (G1), one on the absolute candle body (G3). The close position is (close − low) / (high − low), so it describes where the bar finished inside its own range rather than relative to any external level.
The optional trend filter is a plain exponential moving average of the closing price on the chart's own timeframe, used as a slow-trend proxy: long setups are only allowed above it, short setups only below it. Set its length to 0 to switch it off. There are no higher-timeframe data requests anywhere in this script.
Entry is the open of the expansion bar. The stop is the absorption bar's extreme, plus an optional buffer in ticks. Both targets are multiples of that entry-to-stop distance, so they scale with the setup instead of with a fixed price amount. Target 1 is the level the record row measures against; Target 2 is drawn for reference only.
Every gate is evaluated and latched on confirmed bars only. There is no lookahead and there are no forward-looking references. A filled gate is never un-filled retroactively; the live bar can only be rejected, never rewritten. A bar that would satisfy two gates at once advances the setup by exactly one step — each gate has to be paid for with its own bar.
The chart geometry is redrawn from scratch on the last bar rather than accumulated, so what you see on the chart is always the setup the dashboard is describing, and closed setups do not leave debris behind.
🔶 ALERTS
Six conditions: setup reached 2/4, setup reached 3/4, signal LONG, signal SHORT, setup expired, setup invalidated.
The staged alerts follow from the same idea as the meter: being told a setup is one gate away is more useful than only being told after it is over.
🔶 HOW TO USE
1. Read the record row before anything else. Load your instrument and your timeframe and see what it says there. If it does not convince you, that is the tool telling you honestly that it is not for that market.
2. Check the sample size in the same row. A run of ten or twenty setups is an anecdote. The row flags small samples for exactly this reason.
3. Watch the meter, not the arrows. Most of the information is in setups that reach 2/4 or 3/4 and then die — that tells you what the market is refusing to do.
4. The stop sits at the absorption bar's extreme by default, which is tight. On fast intraday charts try the Stop Buffer input and watch how the record row responds.
5. The trend filter changes the population of setups substantially. Check the record row with it on and with it off on your own market before deciding which you prefer.
6. Set the 3/4 alert if you want to be at the chart before a setup completes rather than after.
🔶 SETTINGS
Volume (percentile window) · Gate Thresholds (G1 volume percentile, G1 close position, G3 body percentile, trend filter length, setup TTL) · Trade Levels (draw toggle, stop buffer in ticks, two R-multiple targets) · Display (dashboard and position, current-signal marker, all-past-signals marker, colors).
🔶 HONEST LIMITATIONS
Volume alone cannot be attributed to buyers or sellers. This tool reads total bar volume against the bar's close position. It does not know who traded, and it is not order-flow data. Treat the absorption premise as a reading of effort against result, which is what it is.
The volume itself is only as good as the feed. On spot forex and CFDs the exchange reports TICK volume rather than real traded volume, so the percentile ranks describe activity rather than quantity. On symbols with no volume data at all the gates cannot fill, and the dashboard says so in its top-right corner.
The retest requirement will cost you moves. As described above, setups that never return to the origin level expire unfilled even when price travels well beyond the drawn targets. This is structural, not a bug, and on strongly trending stretches it happens often.
Percentiles are relative to their window. After an abrupt change of volatility regime the ranks need a few dozen bars to catch up, and during that stretch the thresholds are still measuring the old regime.
The record row is an honest count, not a backtest. It assumes a fill at the exact entry price and it ignores fees, spread and slippage — all of which work against you in reality, and all of which matter a great deal when the outcome is close to even. A record that looks positive before costs can be negative after them. It also covers only the setups on the history your chart has loaded, which on intraday timeframes is a small sample.
Results vary far more between markets than between settings. The same script on the same timeframe can produce a very different record on two different symbols, and there is no timeframe this tool is generally "best" on. Any suggestion otherwise would be an invention. Check your own market.
This tool describes a sequence of conditions in price and volume. It does not forecast anything, it makes no claim about how often the sequence resolves favourably, and the drawn levels are the geometry of the setup, not a recommendation. It is published for analysis and education, it is not financial advice, and past behaviour of a pattern does not guarantee its future behaviour. Check the record on your own market, manage your own risk, and decide for yourself.
Part of the EonMetrics toolset.
Indicator
Hourly Liquidity Clock HOD/LOD Probability Map (AlgoForex) Most intraday tools tell you WHERE price may react. This one tells you WHEN.
Hourly Liquidity Clock builds a rolling statistical profile of the trading day
for the symbol you have open, and answers three questions:
• Which hour of the day most often contains the DAILY HIGH?
• Which hour most often contains the DAILY LOW?
• Which hour carries the largest average range?
── HOW IT WORKS ──────────────────────────────────────────────
For every completed day inside the lookback window (default 60 days) the script
records the hour in which the daily high and the daily low were printed, in the
timezone you select. Those counts are converted into a percentage of days.
In parallel it aggregates each clock hour independently: average high-to-low
range, and the share of hours that closed above their open (directional bias).
The three hours with the highest combined HOD + LOD count are labelled Power
Hours and tinted on the chart, so you can see at a glance whether the current
candle sits inside a historically decisive window or inside dead time.
Session ranges are drawn on top of this: Asia, London and New York boxes with
their high and low projected forward. When a projected level is traded through,
the level stops extending and a sweep marker is printed.
── HOW TO READ IT ────────────────────────────────────────────
HOD% column — share of days whose high formed in that hour. Brighter = higher.
LOD% column — share of days whose low formed in that hour.
BIAS column — green above 55%, red below 45%, neutral in between.
RANGE column — average range of that hour, in symbol price units.
A hour with a high HOD% and a low LOD% is a hour that historically completes
upside expansion. The mirror case marks downside expansion. Hours with low
values in both columns are consolidation windows.
── SETTINGS ──────────────────────────────────────────────────
Timezone — set this to your broker or server time so the hours match
the clock you actually trade on. Everything reprints.
Lookback (days) — 60 is a balance between sample size and adaptation.
Raise it for stable instruments, lower it after a regime
change.
Power Hours — how many hours are highlighted.
Sessions — three fully editable windows, name, time and colour.
Sweeps — markers and alert() calls on session high/low takes.
── NOTES ─────────────────────────────────────────────────────
Use a 1H timeframe or lower. On 4H and above an hour cannot be resolved and the
table will warn you.
The statistics need history. Give the chart enough bars for the lookback window
to fill, otherwise the sample is too small to read.
This is a timing and context tool. It produces no entries, no exits and no
buy/sell signals, and past hourly distributions do not guarantee future ones.
Nothing here is financial advice. Indicator
ORB Opening Range I EonMetrics ORB - Opening Range
ORB marks the opening range — the high and low of the first minutes of a session — and tracks what price does with it for the rest of the day: breakouts by closing price, failed breakouts that snap back inside, and extension levels projected from the range height. The last few days stay on the chart so you can judge at a glance how your instrument actually behaves around its open.
🔶 HOW IT WORKS
From the session open (New York 09:30 by default) the script records the high and low of the first X minutes — 5 to 60, you choose. When the window closes, the range is frozen: a box marks the window, and the high/low lines extend forward until the next session begins. The first candle that CLOSES outside the range tags the breakout; a close back inside within your chosen number of bars tags it as FAILED and re-arms the day.
🔶 WHY THE OPENING RANGE MATTERS
The first minutes of a session concentrate the reactions to everything that accumulated while the market was closed or quiet: overnight news, opening auctions, the first institutional orders of the day. The range those minutes carve out is the day's first agreed-upon value area. That is the reasoning behind the concept, and it is why the tool also tags a move that closes back inside the range rather than only tagging the escape — the two outcomes describe different sessions.
Worth stating plainly: this is the rationale for the concept, not evidence that it works. Whether your instrument respects its opening range is an empirical question about that instrument, and the History setting exists so you can answer it with your own eyes before relying on anything here.
🔶 WHAT IT DOES
Opening range — box over the window (5/15/30/45/60 min), frozen high/low lines extended through the session. Session presets: New York 09:30, London 08:00, Tokyo 09:00, or a fully custom open time with its own timezone (DST handled by the timezone database, not by fixed offsets).
Extension levels — optional lines at ±0.5×, ±1×, ±1.5× and ±2× the range height, projected above the high and below the low. These are reference levels for reading how far a move has traveled relative to the range — the script does not call them targets, because they are not.
Breakout status — evaluated on closing prices only, never on wicks. First close above the high tags ORB ▲, first close below the low tags ORB ▼. A close back inside the range within K bars tags FAIL and re-arms the day, so a later genuine breakout can still be tagged.
History — the last D days of ranges stay on the chart (configurable). Scrolling back through a week of your own instrument is the fastest way to see whether its opening range is worth watching at all.
🔶 ALERTS
Four alert conditions: opening range set, breakout above, breakout below, failed breakout.
🔶 HOW TO USE
1. Pick the session that matches your market — NY 09:30 for US indices and metals, London 08:00 for European hours, or a custom time.
2. Pick the window length. 15 and 30 minutes are the classic choices; shorter = earlier levels, noisier range.
3. Watch the first close outside the range — and read a quick close back inside (the FAIL tag) as a description of that session, not as noise to ignore.
4. Set the four alerts and stop watching the open candle by candle.
🔶 SETTINGS
Session (preset / custom time + timezone, range length) · Levels & Breakout (extension multiples, failed-breakout window, days of history) · Style (colors, box fill).
🔶 HONEST LIMITATIONS
The opening-range concept assumes a session with a real open — indices, metals, forex sessions. On 24/7 crypto a "session open" is a convention: the tool works there mechanically, but the premise behind it is weaker, and you should know that before trading around it. The chart timeframe must be at or below the window length (a 30-minute range cannot be built from hourly bars — the indicator stays empty rather than guessing). This tool draws levels and states facts about closes; it does not generate signals or targets.
Part of the EonMetrics toolset.
Indicator
Indicator
VWAP Suite I EonMetricsVWAP Suite
VWAP Suite plots three independently anchored Volume-Weighted Average Price lines — Session, Weekly and Monthly — with volume-weighted deviation bands and the previous period's VWAP close kept on the chart as a reference level. Everything is computed from first principles at each anchor, so every line resets exactly where its period starts.
🔶 WHAT VWAP IS
VWAP is the average price of the period weighted by how much volume traded at each price. It answers one question: "what is the fair average price actually paid since the anchor?" That is why institutional execution desks benchmark fills against it, and why price so often reacts when it returns there — it is the level where the average participant in the period is at break-even. Above the VWAP the average buyer of the period is in profit; below it, under water.
🔶 WHAT IT DOES
Three anchors — Session (resets each trading day), Weekly and Monthly VWAP, each with its own toggle and color. Intraday traders typically work with Session, swing traders add Weekly, and Monthly serves as the higher-timeframe fair-value reference. Anchors that make no sense on the current chart timeframe (e.g. a Session VWAP on a daily chart) hide themselves automatically.
Deviation bands — ±1σ, ±2σ and optional ±3σ around ONE chosen anchor. The deviation is volume-weighted and anchored to the same period as the VWAP it wraps — not a rolling standard deviation — which is the statistically consistent way to band a VWAP (the same math PulseWire's built-in VWAP bands use). ±2σ is the classic stretched-price reference; the optional gradient fill keeps the zones readable without clutter.
Previous VWAP Close — the exact level where the Session (or Weekly) VWAP finished its previous period, drawn flat through the current one. The same idea as previous day high/low, but volume-based: yesterday's fair price is a natural magnet and reaction level for today. Few VWAP tools carry this level forward — it is the reason this suite exists.
🔶 HOW IT IS CALCULATED
From each anchor the script accumulates three sums bar by bar: volume × price, volume, and volume × price². VWAP = Σ(volume × price) / Σ(volume). The band deviation comes from the volume-weighted variance Σ(volume × price²)/Σ(volume) − VWAP². At every period rollover the previous VWAP value is captured first, then the sums reset to zero. Values only update on confirmed data — there is no repainting logic anywhere in the script.
🔶 ALERTS
Seven alert conditions: price crossing each of the three VWAPs, price touching the +2σ or −2σ band, and price crossing the previous Session or previous Week VWAP close.
🔶 HOW TO USE
1. Pick your anchors — Session for intraday, add Weekly for swing context.
2. Choose which anchor carries the deviation bands (Bands Around).
3. Keep Previous Session VWAP on — reactions at yesterday's fair price are the cleanest thing this tool shows.
4. Set alerts on the crossings you actually trade around.
🔶 SETTINGS
Source (price input, hlc3 default) · Anchors (Session / Weekly / Monthly, each with color) · Deviation Bands (anchor selector, ±1σ/±2σ/±3σ toggles, gradient fill) · Previous VWAP Close (Session / Weekly levels).
🔶 HONEST LIMITATIONS
On CFDs and spot forex the data feed reports TICK volume (number of price updates), not true traded volume. VWAP built on tick volume is still the standard practice on those markets and tracks the real one closely on liquid symbols, but you should know what feeds the math. On symbols with no volume data at all the script deliberately shows nothing rather than fake a line. VWAP is a descriptive average, not a prediction — this tool draws levels, it does not generate signals.
Part of the EonMetrics toolset.
Indicator
Prop Firm Risk Guard I EonMetrics Prop Firm Risk Guard
Prop Firm Risk Guard is a risk dashboard and position size calculator for prop firm challenge and funded-account traders. It keeps the numbers that decide whether your account survives — the Daily Loss Limit, the Max Drawdown floor and the size of your next trade — on one screen, derived from one shared account state.
Stated plainly up front: PulseWire cannot see your broker account. Your balance and today's P&L are MANUAL inputs — you type them in, the script does the limit math and the sizing math. Entry, Stop and Take Profit are also yours: the script never calculates or suggests any of them, it only draws the levels you decided on and does the arithmetic. The only live, price-driven element is the Entry/SL/TP lines and their cross alerts. No signals, no trade suggestions.
🔶 WHY ONE SCRIPT
A challenge usually fails through one compounding mistake: a trade sized without checking how much of today's loss allowance is actually left, so a routine stop-out becomes a daily breach. That check only works when the daily limit, the drawdown floor and the position size are computed from the same account state at the same moment — which is why they are one dashboard instead of separate tools you would have to cross-reference by hand. The last sizing row makes the link explicit: it compares one full stop-out against your remaining daily room and turns red BEFORE the trade if it doesn't fit.
🔶 WHAT IT DOES
Daily Loss Limit — enter your firm's daily loss % and its basis (starting or current balance). Today's P&L is a NET number, wins offset losses. Because firms word this rule two ways, both models are supported: Floor (the day has a fixed equity floor, so intraday profit adds room before it — the common model) and Hard Cap (the allowed loss is fixed, profit does not extend it). The table shows the remaining allowance in money and a status ladder: OK → CAUTION (50% used) → DANGER (80%) → BREACHED.
Max Drawdown — Static (floor fixed below the starting balance) or Trailing (floor follows the equity high-water mark). Shows the floor as an actual money level and the buffer above it, with the same status ladder.
Position sizing — risk per trade as % of balance or a fixed amount, planned entry (or live price) and stop. Returns the size in units, the forex conversion to 100k lots and the notional value. A Contract Multiplier input keeps the math correct on futures (e.g. ES = 50, GC = 100) as well as stocks, crypto and forex.
Take Profit (optional) — add your own TP price to see the R:R ratio and the money gain if it hits, using the same calculated size. If the TP sits on the wrong side of entry for your direction, the cell flags it instead of showing a meaningless ratio.
Entry / SL / TP lines — your levels drawn on the chart, with three alert conditions that fire when price crosses any of them.
🔶 HOW TO USE
1. Settings → Account: starting balance, current balance; high-water mark for trailing-drawdown firms (0 = auto).
2. Prop Firm Rules: copy the exact numbers and models from your firm's dashboard.
3. During the session, keep Today's P&L updated — the daily section only knows what you tell it.
4. Before a trade: set risk, entry and stop; read the size; make sure the last row is not red.
5. Optional: add a TP for R:R, and set alerts on the three price-cross conditions.
🔶 SETTINGS
Account (balances, high-water mark) · Prop Firm Rules (daily loss % + basis + Floor/Hard Cap, max drawdown % + Static/Trailing, profit target) · Today's P&L · Position Sizing (risk mode, entry/stop/TP, contract multiplier, lines toggle) · Table (position, text size).
This tool does the arithmetic of your firm's rules and your own trade plan. It does not know your account, does not predict anything and does not tell you what to trade.
Part of the EonMetrics toolset.
Indicator
RS Rating (Relative Strength) - Clean Table UIThis indicator calculates the Relative Strength (RS) Rating of a stock compared to the S&P 500 (SPY) and displays it as a clean, simple numerical value in a customizable table on your chart.
Unlike many complex swing data indicators that clutter your screen with moving averages, background colors, and multiple data points, this script is specifically designed for minimalist traders, day traders, and scalpers who only need to see the core RS Rating score at a single glance.
How It Works:
Core Calculation: It uses the standard weighted formula for 1-year performance (40% for the most recent quarter, and 20% for each of the previous three quarters) compared against the S&P 500 benchmark.
Percentile Ranking (1-99): Using market environment seed data, the raw score is converted into a true 1 to 99 percentile ranking. For example, an RS Rating of 85 means the stock is currently outperforming 85% of the overall market.
Color-Coded Signals: The numerical value automatically changes color based on the stock's momentum:
Green (>= 80): Strong market leader.
Red (<= 40): Weak laggard.
Custom/White: Neutral performance.
Features:
Zero Chart Clutter: No lines or shapes plotted over your candles. Just a single, elegant table.
Fully Customizable: You can easily change the table's position (Top/Bottom, Left/Right) and text size (Normal, Large, Huge) directly from the indicator settings to fit your exact workspace layout.
(Credits to the original open-source community and Fred6724 for the percentile mapping seed function utilized to power this clean UI version). Indicator
Liquidity Sweep Hunter & Targets | AlphaScript⚡ Liquidity Sweep Hunter & Targets
Tracks the High and Low of the Asia and London sessions, tells you exactly what happened to each level, and plots a risk-defined trade framework when a level is swept during the New York session.
This indicator is an upgrade to the : Session Sweep Detector
🔍 What it does
When a session closes, its High and Low become fixed liquidity levels. The indicator draws each level from the exact candle that printed the extreme and watches it until the same session opens again the next day.
Each level resolves in exactly one of three ways:
⚡ SWEEP — price wicks through the level but the bar closes back on the original side. A liquidity raid: stops were taken, but the level held on a closing basis.
💥 BREAK — a bar closes through the level. This is not a sweep, and the indicator never labels it as one. Breaks are displayed separately (and can be hidden) so the two events are never conflated.
🛡️ Untouched — the level survives its full watch window without either event.
First qualifying event wins: one outcome per level, per session, per day. If a bar both pierces and closes through a level, it counts as a break — a close through the level can never be a sweep.
🎯 NY Sweep Targets
When a session level is swept during the New York session, the indicator plots a risk-defined framework:
-Entry at the sweep bar's close
-Stop beyond the sweep wick or beyond the swept level (your choice), plus a tick buffer
-Four fully configurable R-multiple targets (default 1R / 1.5R / 2R / 3R)
-Optional risk / reward zone shading
A Low swept = bullish framework (targets above); a High swept = bearish (targets below). The targets are risk-multiple geometry measured from your entry and stop — planning levels for trade management, not predictions of where price will go.
📖 How to read the chart
-Solid colored lines are session levels, each starting at the candle that actually made the High or Low, so the line points at the liquidity itself.
-Every level line extends to the same right edge, so the name/price labels line up in a clean column.
-When a level is swept or broken, a tag prints at the event bar marking exactly where it happened.
-Previous sessions' levels remain on the chart as reference, with an option to keep or hide their labels.
⚙️ Settings
-Toggle each level independently (Asia High/Low, London High/Low), with per-session colors and fully configurable session hours (New York time; defaults: Asia 18:00–04:00, London 03:00–12:00).
-Minimum wick penetration filter (in ticks) to ignore marginal pokes when qualifying sweeps. Does not apply to breaks.
-Full control over the target framework: stop anchor, buffer, four R-multiples, line styles, colors, and optional risk/reward fills.
-Control how many previous sessions stay on the chart, whether previous-session labels are shown, and optional transparency for past levels.
🔔 Alerts
Per-level sweep alerts (Asia High/Low, London High/Low), combined "Any Sweep" and "Any Break" alerts, and an "NY Sweep Setup" alert that fires when a target framework is plotted. All alerts fire on the close of the event bar.
📌 Notes and limitations
-Designed for intraday timeframes (1 minute to 30 minutes). On higher timeframes, sessions span too few bars for meaningful detection.
-Session times are defined in New York time (America/New_York) and handle the midnight crossover correctly. If you use another session-levels indicator, match the session hours so both tools agree on where the levels are.
-The target framework is a trade-management and planning tool. Entry, stop, and R-targets are geometry based on the sweep — use your own analysis and risk management to decide whether and how to act on a setup.
-Sweep-vs-break classification depends on your chart timeframe: a wick-through-and-reclaim on a 15m bar may resolve as a break on 1m if an intermediate bar closed beyond the level. Neither reading is wrong — they answer different questions.
✅ Why no repaint
-Events are evaluated on confirmed (closed) bars only. A sweep or break tag will never appear intrabar and then vanish.
-Levels are only armed after their session has fully completed. A session High that is still forming cannot be "swept" — price touching it would simply extend it — so no detection runs until the level is final.
-No request.security() calls are used anywhere. All session tracking is chart-timeframe stat Indicator
Opening Range Breakout ORB - Signals, Targets & Alerts [LunqFX]The Opening Range Breakout (ORB) is one of the most traded intraday strategies — but most ORB indicators only draw the opening range box and leave you guessing. This Opening Range Breakout indicator goes further: it marks the opening range, detects the first genuine breakout, filters fakeouts, projects measured-move targets, and — uniquely — builds a live breakout statistics engine from the last 100 trading days of the symbol on your chart.
What makes this ORB indicator different
Instead of a static box, you get a data-driven read on how your market actually behaves after the opening range:
First-break direction split — how often the day breaks up vs down
Hold rate — how often the first breakout direction holds into the close
Fakeout rate — how often the first breakout fails back inside the range
Target hit rates — how often price reaches 1x and 2x the opening-range height
So before you take the trade you can see, for example, that on this symbol the upside breakout holds into the close 62% of the time and the 1R target is reached on 48% of breakout days.
How the opening range breakout is calculated
Auto mode works on every market with zero setup. The opening range starts at each day's open of the symbol's own exchange — stocks at the 09:30 session open, crypto at the 00:00 UTC daily open, forex and futures at their session open — and lasts a chosen number of minutes (the classic 5-minute, 15-minute or 30-minute ORB). A Custom mode lets you define any session window, such as the London or New York open.
When the opening-range window closes, the range high and low are locked and projected forward as levels.
The first candle close beyond the range (or wick, if you prefer) is treated as the breakout. Targets are projected at 1x and 2x the range height in the breakout direction.
A close back inside the range before the first target is reached is flagged as a fakeout. A breakout that reaches 1R first and only then returns is counted as a valid breakout, not a fakeout.
At the end of each trading day the outcome is recorded — direction, hold, fakeout, targets — and the dashboard percentages are plain rolling hit rates. No repainting, no curve fitting.
How to use it
Breakout day trading: trade the first breakout with more context — use the hold rate to judge whether the break on your symbol is worth taking, and size your target from the 1R / 2R hit rates.
Fakeout fade: when a symbol shows a high fakeout rate, the failed breakout back inside the range is often the better setup; the fakeout is marked in real time.
Range-quality filter: the dashboard shows the opening range as a multiple of ATR, so you can skip abnormally small ranges that tend to break out randomly.
Works on any symbol and any intraday timeframe (1m–15m recommended): index futures and CFDs (NAS100, SPX500, US30, NQ, ES), stocks and ETFs (SPY, QQQ), gold (XAUUSD), Bitcoin and crypto, and forex majors.
Dashboard
A clean on-chart panel shows today's live status (building range → inside range → breakout → target hit or fakeout), the opening-range high/low and its size in ATR, and the full statistics block with the sample size always visible.
Settings
Auto anchor (any market, zero setup) or fully custom session window with timezone control — 5 / 15 / 30-minute ORB or any session open
Close-based or wick-based breakout logic
Adjustable target multiples, rolling statistics window, and visuals
Alerts for range locked, breakout up, breakout down, fakeout, target 1 and target 2
Optional gradient momentum candles that can be switched off
No repainting
The opening range is fixed the moment its window closes. Breakouts, fakeouts and targets are confirmed on closed bars only, and the statistics are built exclusively from completed trading days — never recalculated backwards.
This indicator is an educational market-analysis tool, not financial advice. Historical statistics describe past behavior and are not a guarantee of future results. Always confirm with your own analysis and manage your risk.
Indicator
Indicator
Opening Range Breakout (ORB) [martineye15]Opening Range Breakout (ORB) — a configurable, non-repainting opening-range breakout tool. It records the high and low of an opening-range window you define, locks that range at session close, then signals breakouts above or below it and projects a stop-loss and up to three take-profit targets for each one. It is market-agnostic: session, timezone, active days, confirmation style, risk model, filters, visuals and alerts are all inputs, so the same tool adapts to indices, futures, forex, crypto or stocks on any intraday timeframe.
THE OPENING RANGE
- Define the range by session time and timezone (e.g. 0930-0945 New York for the first 15 minutes of the US cash open), with presets for the major world market zones.
- Choose which weekdays are active (Mon to Sun).
- The range builds live during the window, then locks at session close. Optionally extend the locked levels across the rest of the day.
BREAKOUT DETECTION
- Confirmation: require a bar to close beyond the level, or count any wick / touch.
- Signal mode: the first breakout of the day only, or every breakout.
- Optional retest: after the initial break, wait for price to return to the broken level and resume in the breakout direction before signalling.
RISK MODEL
- Stop-loss: opposite OR boundary, OR midpoint, ATR, fixed ticks, or percent.
- Take-profit: risk multiple (R), OR-range multiple, ATR, fixed ticks, or percent, with up to three targets.
- Levels are computed from the entry, drawn with labels, and their hits are tracked bar by bar.
FILTERS
- OR size filter: skip days whose range is too small or too large (in ticks or percent) to avoid low-quality sessions.
- One trade per day.
- Volume confirmation: require the breakout bar's volume to exceed its moving average.
VISUALS & INFO
- Opening-range box and high/low lines, breakout labels, and SL/TP lines, all with configurable colours, width and style.
- Optional session background, and an on-chart info table showing the OR high/low, range size, current state (forming / waiting / filtered / active / closed) and the latest result.
ALERTS
- Opening range formed, bullish breakout, bearish breakout, take-profit hit, and stop-loss hit, with messages that include the symbol, timeframe and levels.
HOW TO USE
Apply it to an intraday chart and set the OR session and timezone to match your instrument — the US cash open, a forex session open, or any window you trade. Tune the stop and target model to your risk approach, add the size, volume or one-trade-per-day filters if you want stricter conditions, and set alerts on the events you care about. Every module toggles independently, so you can keep the chart minimal or fully detailed.
WHAT MAKES IT DIFFERENT
Rather than a fixed opening-range window with a single stop and target rule, everything is parameterised: five stop methods, five target methods with up to three targets, an optional retest condition, size and volume filters, and full timezone / session / weekday control — so one tool fits very different instruments and playbooks while staying non-repainting.
REPAINTING & LIMITATIONS
Breakout signals and stop/target hits are evaluated only on confirmed (closed) bars, so historical and realtime behaviour match — the tool does not repaint. The opening-range box and lines update live while the range is still forming, which is expected. It runs on intraday timeframes only; on daily or higher it displays a notice instead of drawing.
This is a visual, decision-support tool. It is not a strategy, it places no orders and reports no performance statistics, and it is not financial advice. Indicator
ORB + Volume Confirmation | AlphaScriptORB + Volume Confirmation filters the opening range breakout through the one thing most ORB tools ignore: whether anyone actually showed up for the move.
Every breakout is checked against relative volume, and the ones that fail the check get marked right on your chart — hollow, gray, labeled. For the first time you don't just see the breakouts you'd take. You see the ones that would have taken you.
🧠 Concept
The number one complaint about opening range breakout systems is false breakouts — price pokes through the range, triggers the entry, and immediately reverses. But most false breakouts share a fingerprint: they happen on thin volume.
A genuine initiative break is an auction event; participants commit size to push price out of balance, and that commitment is visible in the tape before the follow-through confirms it. A breakout on quiet volume isn't initiative — it's drift, and drift beyond a boundary gets sold back inside.
The fix isn't a better range. It's asking one question at the moment of the break: is this bar's volume abnormal for this moment of the day? If yes, the break is confirmed. If no, it's flagged as exactly what it is — a breakout that crossed the line without the fuel to hold it.
🔍 What it does
Builds the opening range from the first N minutes of your session (5/15/30/60, timezone configurable) and draws it as a clean box that releases price after a set number of bars, with the range high and low continuing as level rays across the session.
Every close beyond the range is then sorted into one of two categories:
Confirmed breakout — close beyond the range AND relative volume at or above your threshold (default 1.5×). Marked with a bold signal label showing the exact volume multiple ("LONG BREAK · 2.5× VOL"), plus projected targets at 0.5×, 1.0×, 1.5×, and 2.0× the range height.
Unconfirmed breakout — price crossed, volume didn't. Marked hollow and gray with its actual reading ("no vol 1.1×"). These marks are the teaching layer of the entire tool: scroll back through any month of sessions and count how many of the gray triangles reversed. That's the tuition a naked ORB system charges.
Two volume engines are included. Rolling SMA compares the bar against recent average volume — simple, active immediately. Time-of-Day (adaptive) compares each bar against the average volume at that same minute of the day across recent sessions — the stricter, more honest read, because it knows the open is always loud and refuses to be impressed by it.
⚙️ How it works
A breakout is confirmed only on a full bar close beyond the range — wicks don't count, and nothing repaints intrabar. One confirmed signal per direction per session, so a chop day can't spam your chart or your alerts.
Signals are only valid within a configurable window after the range completes (default 3 hours). A late-afternoon "break" of the morning range is a different trade — this tool refuses to pretend otherwise.
Relative volume is computed against a baseline that never includes the current bar, zero-volume bars can never confirm, and the session logic survives date rollovers, holiday sessions, and the Sunday futures open. Intraday charts only, at or below the range duration — the script enforces this rather than silently drawing nonsense.
Targets are fully configurable: independent colors per direction, line style, width, transparency, labels — and an option to keep target levels from previous sessions on the chart (depth of your choosing), turning the tool into a study of how price respects old range projections.
📈 How to use it
The default configuration is built for US index futures: 15-minute opening range, New York 09:30 session, 1.5× volume threshold on a 1–5 minute chart.
Start by doing nothing. Load it, scroll back twenty sessions, and compare the confirmed signals against the gray ones. The threshold isn't a magic number — it's a dial between selectivity and opportunity, and the chart will show you where your market and timeframe want it. Index futures generally respect 1.5×; forex tick volume tends to run flatter, so 1.2–1.3× is a more realistic starting point there.
The volume multiple printed on each signal is information, not decoration:
a 3× break and a 1.6× break both confirm, but they are not the same trade.
Three alerts are included: confirmed long, confirmed short, and unconfirmed touch (off by default — turn it on if you want to be told when a trap is forming). Recommended setting: "Once per bar close."
📝 Notes
A decision-support tool, not a strategy. Volume confirmation filters breakouts — it doesn't guarantee them. Confirmed breaks fail too, just less often than the ones nobody paid for. Always apply your own risk management. Indicator
ORB Breakout Targets | AlphaScriptORB Breakout Targets combines a session opening range with the key levels traders already watch , then answers the question most breakout tools leave open: broken — toward what? When the range breaks, the nearest significant level beyond the break is automatically identified and highlighted as the measured target. A breakout with a destination, not just an arrow.
🧠 Concept
The opening range of a session concentrates the first auction of the day; its break signals initiative in one direction. But a break alone says nothing about follow-through — price tends to travel between reference levels, and the natural magnet after a breakout is the nearest untested level in the breakout direction: the prior day's high, an overnight session extreme, the Monday range. Finding that level by eye, every session, across a dozen candidates, is exactly the work this tool removes. The range gives you the trigger; the key level map gives you the objective.
🔍 What it does
Builds the opening range from the first N minutes (default 30) of your chosen session — New York, London, or Asia — and draws it as a live box whose fill reflects the current state: bullish coloring while price holds above the range midpoint, bearish below it, updating in real time so the box itself reads as a bias gauge at a glance. On a confirmed breakout, marks the break on the chart and highlights the nearest enabled key level beyond the range as the target, in its own color with a dedicated label.
Key levels available as target candidates and chart structure:
Timeframes — 4H, Daily, Weekly, Monthly, Quarterly, Yearly: open, high, low, mid, and the prior period's high, low, and mid
Sessions — Asia, London, New York (windows configurable, in New York time): open, high, low, mid, and prior session levels
Monday Range — high, low, and mid of the week's opening day
Levels sharing the same price within your Merge Threshold collapse into one line with a combined label, so the target reads as a single clean zone even when multiple references agree on it.
⚙️ How it works
A breakout is confirmed only on a full bar close beyond the range — wicks through the boundary don't count, and nothing repaints intrabar. Detection runs only during the parent session of your selected opening range, so overnight drift through yesterday's levels never produces a false signal.
On a bullish break, the target is the first enabled level above the range high; on a bearish break, the first enabled level below the range low.
Levels sitting inside the range are never selected. The target is dynamic: enable or disable level groups and it recalculates to the nearest qualifying level — your level settings are your target settings.
All higher-timeframe and session values are retrieved with non-repainting historical requests. What a historical bar shows is what you would have seen live.
📈 How to use it
The default view is built for intraday breakout trading: previous day high/low, Asia and London session extremes, and the Monday range as target candidates, with the New York 30-minute opening range.
Fewer enabled levels means more meaningful targets — add Weekly or Monthly levels only if you want swing-distance objectives, and expect targets to sit farther away when you do.
The box color gives a quick bias read before and after the break: sustained bullish fill with price pressing the range high often precedes the upside break, and a break that flips the box back against you is an early warning the move is failing.
Three alerts are included: bullish breakout, bearish breakout, and target reached — each fires once per session, per direction. Recommended alert setting: "Once per bar close." PulseWire shows a standard notice on alerts from close-confirmed scripts; that is expected behavior and the tradeoff for signals that don't repaint.
Session times, range duration (1–120 minutes), colors, line styles, and every level group are independently configurable.
📝 Notes
A decision-support tool, not a strategy. The target marks where the nearest significant reference sits beyond the break — where price has reacted before, not where it must go. Breakouts fail; targets are objectives, not guarantees. Always apply your own risk management. Indicator
Projected Volume (Intraperiod Estimate)Projected Volume (Intraperiod Estimate)
════════════════════════════════════════
OVERVIEW
Projected Volume replaces the standard volume study with a live, forward-looking
estimate of where the current bar's volume is likely to finish. Volume is only
known with certainty once a bar closes, which makes it hard to judge in real time
whether the bar in progress is trading heavy or light. This indicator solves that
by drawing the volume already traded as a solid column and projecting the
remaining, not-yet-traded volume as a hollow cap on top — so the anticipated
final volume of the developing bar is visible at a glance. The projection is
rebuilt on every update of the live bar and adapts to your chart timeframe and to
the data your subscription can access.
WHAT IT PLOTS
• Directional volume columns on every bar — green when close ≥ open, red when
close < open (the standard volume read you already use).
• On the current, unfinished bar only:
– a solid column for the volume traded so far;
– a hollow outline extending from the top of the solid column up to the
projected final volume;
– an optional label with the projected total and the percent of the period
elapsed.
As the bar fills in, the solid portion grows and the hollow cap shrinks toward
zero. At the close, projected equals actual.
HOW THE PROJECTION WORKS
The indicator uses two methods and selects between them automatically based on
whether sub-bar (intrabar) data is available.
1) Intraperiod volume profile — primary method
For each of the last N completed bars, the script requests lower-timeframe
volume and measures how volume accumulates through the period: what fraction of
the period's total volume is typically complete by the end of each time-slice —
the classic "how much of the day's volume is usually done by the first hour, the
second hour…" shape. That cumulative curve is averaged across the lookback window
to form a typical accumulation profile.
For the developing bar the script determines how far through the period it has
progressed, reads the typical cumulative fraction f at that point, and estimates:
projected total = volume so far ÷ f
Because the profile captures the real intraperiod shape — the U-shaped session
volume common in equities, or the flatter distribution of 24/7 crypto — the
estimate reflects typical behavior rather than assuming volume arrives at a
constant rate.
2) Average-of-increment — base-resolution fallback
When the chart is already at the lowest interval your data plan provides (for
example a 1-minute chart on a plan without seconds data), there is no sub-bar to
sample and the profile method does not apply. In that case the script projects:
projected total = volume so far + (1 − elapsed) × average volume of last N bars
This equals a typical bar early in the period, tracks the realized volume as the
bar fills, always sits at or above the volume already traded, and converges to
the actual figure at the close. It requires no lower-timeframe data and cannot
error. Elapsed time is measured from the clock, so no sub-bar feed is needed.
Automatic method selection
The script detects whether a usable lower timeframe exists that your plan can
serve. If so, it uses the profile method — and floors sub-sampling at one minute,
so 5m / 15m / 1h charts still build a genuine profile from 1-minute intrabars. If
not, it uses the average-of-increment fallback. The active method is shown in the
on-chart label, where a "· avg" suffix denotes fallback mode.
SETTINGS
• Intraperiod slices (12 / 24 / 48) — number of time-slices used to model the
accumulation curve within each period. 24 is roughly hourly on a daily chart.
• Lookback periods — number of completed bars averaged for the profile and the
fallback average (default 30).
• Auto sub-period timeframe — when on, the script chooses the intrabar sampling
resolution automatically. Turn off to set it manually.
• Manual sub-period timeframe — used when Auto is off; must be lower than the
chart timeframe.
• Allow seconds sub-sampling — off by default. Enable only if your plan provides
seconds data; when off, the script never requests sub-minute data and therefore
cannot error on a 1-minute chart.
• Min % elapsed before projecting — suppresses unstable projections in the
opening moments of a new bar.
• Up / Down volume colors and a toggle for the projection label.
READING THE LABEL
The label reads, for example, "Proj 1.2M (35% elapsed)" — the projected final
volume and how far the current period has progressed. A "· avg" suffix indicates
the average-of-increment fallback is active because intrabar data is unavailable
at that resolution.
BEHAVIOR, NOTES & LIMITATIONS
• Real-time by design. The projection exists only on the current, unfinished bar
and recalculates as that bar develops. Historical bars display actual traded
volume only — the indicator does not restate closed bars, but the live estimate
moves tick to tick as new volume arrives. This is expected behavior for a
forward projection, not hidden repainting.
• It is an estimate, not a guarantee. Accuracy is lowest in the first fraction of
a new bar and improves as the bar fills; the "Min % elapsed" input guards the
earliest, noisiest moments.
• The profile method depends on intrabar data availability, which varies by
symbol and subscription. Where it is unavailable, the indicator degrades
gracefully to the average-based method.
• Works across asset classes and timeframes. Because elapsed progress is measured
from intrabar count where available (and otherwise from the clock), it adapts to
both continuous (crypto) and session-based (equities/futures) markets.
• Volume reflects the data feed of the chart's symbol; index or aggregated tickers
may report volume differently from a single exchange.
CONCEPT
The tool pairs a standard directional volume histogram with an
intraperiod-accumulation model and presents the realized-versus-projected split
visually as a filled column plus a hollow cap. The aim is a single, glanceable
read on whether the bar in progress is on pace to finish heavy or light relative
to recent norms. Indicator
