Strategy
Indicator
EVA Ai+ Radar v25.2 Screener - Crypto & Stock LONG SHORT Si🧬 EVA Ai+ Radar — профессиональный рыночный скринер и индикатор для PulseWire, созданный для быстрого поиска перспективных торговых инструментов среди российских акций и популярных криптовалют.
Система одновременно анализирует до 20 активов, рассчитывает приоритет каждого инструмента и автоматически сортирует рынок по силе текущего движения. Вместо ручного переключения между графиками трейдер получает компактную премиальную панель с готовым рейтингом активов.
🔎 Что анализирует EVA Ai+ Radar
Для каждого инструмента рассчитываются:
направление краткосрочного и среднесрочного тренда;
положение цены относительно EMA;
сила тренда через ADX и DMI;
состояние RSI;
относительный торговый объём;
направленный рыночный поток Flow;
изменение цены;
итоговая сила и приоритет сигнала.
📊 Сигналы скринера
🟢 LONG — подтверждённое преимущество покупателей и восходящее направление.
🔴 SHORT — подтверждённое преимущество продавцов и нисходящее направление.
🟡 РАНО ↑ / РАНО ↓ — раннее формирование движения до достижения строгого порога основного сигнала.
⚪ НАБЛ. — инструмент пока не имеет достаточного преимущества для подтверждённого входа.
⚡ Два режима работы
RADAR — строгий режим для поиска подтверждённых сигналов LONG и SHORT.
РАНО — расширенный режим, дополнительно показывающий инструменты, в которых движение только начинает формироваться.
🛡️ Защита от перерисовки
По умолчанию скринер использует данные только закрытых свечей выбранного таймфрейма:
без lookahead_on;
без смещения сигналов в прошлое;
без перерисовки подтверждённых значений;
с безопасной обработкой недоступных торговых инструментов
🌍 Поддерживаемые рынки
🇷🇺 Российские акции Московской биржи:
Сбербанк;
Газпром;
Лукойл;
Роснефть;
Новатэк;
Норникель;
Полюс;
Татнефть;
ВТБ;
Яндекс.
₿ Криптовалюты:
Bitcoin;
Ethereum;
Solana;
BNB;
XRP;
Dogecoin;
Cardano;
Avalanche;
Chainlink;
Toncoin.
Все тикеры можно изменить в настройках индикатора.
⚙️ Основные возможности
✅ Скринер акций и криптовалют
✅ Одновременный анализ 20 инструментов
✅ Торговые сигналы LONG и SHORT
✅ Раннее обнаружение движения
✅ Автоматический рейтинг активов
✅ Анализ тренда, объёма, RSI, ADX и DMI
✅ Относительный объём и Flow
✅ Индикатор без перерисовки
✅ Настраиваемый таймфрейм
✅ Алерты PulseWire
✅ Премиальный интерфейс EVA
✅ Безопасная обработка недоступных тикеров
⚠️ Важная информация
EVA Ai+ Radar является аналитическим инструментом и не представляет собой инвестиционную рекомендацию. Сигналы индикатора необходимо оценивать совместно с рыночным контекстом, управлением капиталом и контролем риска.
🧬 EVA Ai+ Radar is a professional PulseWire market scanner designed to help traders quickly identify strong opportunities across major cryptocurrencies and Russian stocks.
The screener analyzes up to 20 markets simultaneously, calculates a priority score for every symbol, and automatically ranks instruments according to current trend strength and market momentum. Instead of manually switching between multiple charts, traders receive a compact premium dashboard with a structured market overview.
🔎 What EVA Ai+ Radar analyzes
For every selected symbol, the system evaluates:
short-term and medium-term trend direction;
price position relative to exponential moving averages;
trend strength using ADX and DMI;
RSI momentum;
relative trading volume;
directional market Flow;
price change;
final signal strength and priority score.
📊 Screener signals
🟢 LONG — confirmed bullish advantage and positive market direction.
🔴 SHORT — confirmed bearish advantage and negative market direction.
🟡 EARLY ↑ / EARLY ↓ — an emerging directional setup detected before the strict signal threshold is reached.
⚪ WATCH — the asset does not currently have enough directional advantage for a confirmed signal.
⚡ Two scanning modes
RADAR — strict mode designed to identify confirmed LONG and SHORT signals.
EARLY — expanded mode that also identifies assets where a new directional move may be starting.
🛡️ Non-repainting calculation
By default, the screener uses confirmed data from closed candles on the selected timeframe:
no lookahead_on;
no historical signal backfilling;
no repainting of confirmed values;
safe processing of unavailable or unsupported symbols.
If one selected ticker is temporarily unavailable, the remaining markets continue to be calculated normally.
💎 Premium EVA dashboard
The dashboard displays:
market ranking;
symbol;
LONG, SHORT, or EARLY signal;
signal strength;
percentage price change;
RSI and relative volume;
directional Flow;
number of active LONG, SHORT, and EARLY signals;
selected timeframe and calculation mode.
The visible list can be adjusted from 5 to 20 rows, while all enabled markets continue to be analyzed.
🔔 PulseWire alerts
The screener includes three alert conditions:
confirmed LONG signal detected;
confirmed SHORT signal detected;
EARLY directional setup detected.
Alerts can be configured using the standard PulseWire alert system.
🌍 Supported markets
🇷🇺 Russian stocks:
Sberbank;
Gazprom;
Lukoil;
Rosneft;
Novatek;
Norilsk Nickel;
Polyus;
Tatneft;
VTB;
Yandex.
₿ Cryptocurrencies:
Bitcoin;
Ethereum;
Solana;
BNB;
XRP;
Dogecoin;
Cardano;
Avalanche;
Chainlink;
Toncoin.
Every symbol can be changed through the indicator settings.
⚙️ Main features
✅ PulseWire stock and crypto screener
✅ Simultaneous analysis of 20 symbols
✅ LONG and SHORT trading signals
✅ Early trend detection
✅ Automatic market ranking
✅ Trend, volume, RSI, ADX, and DMI analysis
✅ Relative volume and directional Flow
✅ Non-repainting indicator
✅ Custom scanning timeframe
✅ PulseWire alerts
✅ Premium EVA interface
✅ Safe invalid-symbol handling
⚠️ Disclaimer
EVA Ai+ Radar is an analytical and educational tool. It does not provide financial or investment advice. Every signal should be evaluated together with market context, position sizing, risk management, and independent analysis. Indicator
Pressure Fatigue Index [PFI] v3Pressure Fatigue Index (PFI)
OVERVIEW
The Pressure Fatigue Index is a bounded oscillator that reads from 0 to 100. Low readings mean oversold and high readings mean overbought, the same orientation you already know from RSI. That is where the resemblance ends. PFI does not use the average gain versus average loss ratio that RSI is built on. It reads a completely separate stream of information, namely where price settles inside each bar and how forceful that bar was, and it adds a fatigue mechanism that keeps the oscillator from pinning at an extreme for long stretches. That pinning behavior is the single most common frustration with RSI in trending markets, and removing it is the whole point of this tool.
HOW THE READING IS BUILT
For every bar, PFI measures where the close finished inside that bar's own range. A close near the high produces a positive value, a close near the low produces a negative value, and the exact middle of the bar is zero. In plain terms the raw bar value is twice the close, minus the high, minus the low, all divided by the range of the bar.
That location is then weighted by the size of the bar relative to recent volatility, using its true range compared with ATR. A wide conviction bar counts far more than a narrow indecisive one, so a big committed push moves the reading while chop barely registers.
Those weighted values are smoothed with a Wilder average into a running charge, and the charge is passed through a smooth squashing curve, a hyperbolic tangent, that maps it cleanly onto the 0 to 100 scale. The outcome is an oscillator that responds to genuine intrabar buying and selling pressure rather than to close to close drift.
THE FATIGUE MECHANIC
This is what separates PFI from every standard oscillator. While the reading sits beyond your overbought or oversold level, a hidden fatigue term builds up, and it builds faster the deeper the reading has pushed into the extreme. That fatigue then compresses the plotted line back toward the midline. To hold a value pinned at 85 the market would have to supply constantly accelerating fresh pressure, which real markets cannot sustain, so an extended run simply sags the line out of the zone on its own. The moment the reading leaves the extreme, fatigue releases and full sensitivity returns. Fatigue is driven by the underlying raw reading rather than the visible plotted line, so there is no threshold flutter and no repainting.
THE RAW GHOST LINE
PFI plots two lines. The bold purple line is the fatigue compressed reading you trade from. The faint gray ghost line behind it is the raw pressure before fatigue is applied. The distance between the two is itself information. When the ghost is still pinned deep in a zone while the purple line sags away from it, the move is still strong and it is not yet time to fade. When both lines roll out of the zone together, the exhaustion is real. The gap between them also drives the signal engine described below.
THE SIGNAL ENGINE
The buy and sell markers are built to catch turns at the actual low and high, not to fire every time a line touches a level. A signal is the end of a short sequence rather than a single condition, and each side can fire only once per cycle.
A buy requires the following to line up in order. First, a flush bar must occur while the raw reading is oversold, meaning a bar that is unusually wide relative to ATR and that closes down at the bottom of its own range. That is the panic capitulation that tends to mark bottoms, and it is marked on the pane with a small dot. Second, the episode must be mature, meaning the gap between the ghost and the purple line has grown wide enough to prove the move was both deep and sustained. Third, the trigger bar itself must be a conviction reversal, a bar with real size that closes up near the top of its range while the reading turns back up near the zone. In short, sellers pressed hard, exhausted themselves on a flush, and buyers just took the first decisive bar back.
Sells are the exact mirror. A euphoric blowoff bar in the overbought zone, a mature episode, and then a heavy rejection bar near the high.
After a signal fires, that side locks and cannot fire again until the reading passes back through the midline, so a single messy bottoming or topping process produces one marker rather than a cluster. A cooldown allows a second attempt only if a fresh, deeper flush develops.
There is also an optional divergence filter. When enabled, a buy also requires price to print a new low for the episode while the pressure reading makes a higher low, the classic bottoming tell. It is off by default because it screens out clean sharp reversals that have no divergence, but you can enable it when you only want the highest conviction fades.
INPUTS
Core sets the price source, the pressure length, the volatility length, and the sensitivity that controls how easily the reading reaches its extremes.
Zones set your overbought and oversold levels.
Fatigue exposes the build rate, the release rate, and the impact, so you can tune how quickly the oscillator tires and recovers and how hard it is pulled back toward the middle.
Signals expose the arm gap, the flush bar strictness, the trigger bar strictness, the near zone buffer, the optional divergence filter, and the re signal cooldown.
Smoothing gives you a moving average over the oscillator with the same menu as the built in RSI, including SMA, EMA, SMMA, WMA, VWMA, and an SMA option with Bollinger Bands.
HOW TO USE IT
Treat the purple line the way you would treat any oscillator, with low as oversold and high as overbought, but trust it to leave the zone on its own rather than staying stuck. Use the ghost line and its distance from the purple line to judge whether a move is still strong or genuinely tiring. Take the triangle markers as your prepared fade entries, and remember that each side fires once per cycle by design. If you want more markers on a fast timeframe, loosen the flush range first, then the arm gap, then the trigger close location. If you want fewer and stronger markers, do the reverse and consider enabling the divergence filter.
Set your alerts to fire once per bar close, since the live bar can move before it settles.
NOTE
This tool is offered for research and education. It is not financial advice. Test it on your own markets and timeframes and manage your own risk before trading it.
Indicator
Cross Asset Sentiment Extremes OscillatorCross Asset Sentiment Extremes Oscillator (XSEO)
WHAT IT IS
XSEO is a composite sentiment oscillator that scores market emotion on a 0 to 100 scale and flags the extremes where mean reversion setups cluster. Readings near the bottom of the scale mark washed out fear of the kind that tends to appear near lows. Readings near the top mark crowded greed of the kind that tends to appear near highs. One script covers stocks, indices, and crypto.
TWO BASKETS, ONE ENGINE
The script reads the symbol type and loads the matching basket of external data automatically. A manual override is available in the settings.
Stocks and indices basket:
VIX implied volatility (inverted, high VIX means fear)
NYSE TRIN (inverted, heavy selling pressure means fear)
CBOE equity put/call ratio, ranked in daily context (inverted)
High yield credit spread (inverted, wide spreads mean risk aversion)
Percent of S&P 500 stocks above their 200 day average (breadth strength)
Percent of S&P 500 stocks above their 50 day average (faster breadth)
Crypto basket:
Perp to spot basis on BTC (a funding and leverage proxy, a rich premium means greed)
Coinbase premium versus Binance (US spot demand)
USDT dominance (inverted, cash parked in stables means fear)
ETH/BTC momentum (alt risk appetite)
DXY (inverted, a strong dollar means risk aversion)
Chart internals, active in both modes:
RSI percentile rank (momentum extreme)
Extension from the 200 bar mean
Realized volatility rank, inverted (calm means complacency, spikes mean fear)
HOW IT IS BUILT
Every component is converted to a percentile rank over a lookback window so that different units blend cleanly, and fear oriented series are inverted so that high always means greed. Feeds that only publish daily (put/call, credit spreads, breadth) are ranked inside a daily request and held between updates. Live feeds and the chart internals are ranked on the chart timeframe, so the line keeps moving intraday. Feeds that are unavailable on a given bar (weekends, holidays, closed sessions) are skipped from the average rather than zeroed, which keeps the oscillator honest on 24/7 crypto charts. The external basket and the internals are then blended with an adjustable weight and smoothed.
READING IT
Above the upper threshold (default 80) the market is in the extreme greed zone. Below the lower threshold (default 20) it is in the extreme fear zone. The line colors itself red when hot, green when cold, and gray in the middle, and the background tints inside the zones.
SIGNALS AND ALERTS
Two trigger styles are available.
Zone Exit (default): the buy fires when the oscillator crosses back up out of the fear zone, and the sell fires when it crosses back down out of the greed zone. This waits for the turn and avoids some knife catching.
Zone Entry: fires the moment an extreme zone is entered. Earlier and more aggressive.
Alert conditions are included for both long and short.
SETTINGS
Fear and greed thresholds. Lookback for chart timeframe ranks (in bars) and a separate lookback for daily feeds (in days). External data weight percent, with the remainder going to the chart internals. Smoothing length. An optional display of the external and internal subscores so you can see what is driving a reading.
DATA SOURCES
CBOE:VIX, USI:TRIN.NY, USI:PCCE, FRED:BAMLH0A0HYM2, INDEX:S5TH, INDEX:S5FI, BINANCE:BTCUSDT.P, BINANCE:BTCUSDT, COINBASE:BTCUSD, CRYPTOCAP:USDT.D, BINANCE:ETHBTC, TVC:DXY
TIMEFRAMES AND NOTES
Built for higher timeframe charts but usable intraday. On intraday charts the daily feeds step once per day while everything else updates live. Consider raising the chart timeframe lookback on fast charts, for example 300 to 700 bars on 15 minute charts. Values drawn from the developing daily bar update in real time until that bar closes, which is standard higher timeframe behavior. XSEO is a timing and context tool, not a complete system. It works best as a filter for mean reversion entries at levels you already care about. Nothing here is financial advice.
Concept credit: builds on the classic composite fear and greed approach of blending volatility, positioning, breadth, and credit data into a single gauge.
Indicator
Realized Price by Baal Hadad v2 (multi-source)Based on "Realized Price" by Baal Hadad (open-source, MPL 2.0).
The original relied on IntoTheBlock's MVRV feed, which stopped updating on August 15, 2025 and was marked as discontinued by PulseWire — the indicator froze. This version fixes that with a multi-source data cascade and adds self-diagnostics.
WHAT IT SHOWS
Realized Price is the average price at which each coin last moved on-chain — the market's aggregate on-chain cost basis. When spot price falls below realized price, the average holder is underwater; historically this marks capitulation zones and potential cycle bottoms. Multiples above it mark overheated zones.
Realized Price = Realized Cap / Circulating Supply
DATA SOURCES (NEW)
Realized Cap, by priority: Custom symbol → CoinMetrics RealCap (direct) → Custom MVRV → IntoTheBlock MVRV (derived as Market Cap / MVRV).
Circulating Supply: Custom → Glassnode → IntoTheBlock → Market Cap / Price (unbreakable fallback).
A source is considered dead if it hasn't updated for N days (default 7, configurable) — the script automatically switches to the next live one. You can also force a specific source or plug in your own symbols.
DIAGNOSTICS (NEW)
An on-chart table shows every feed's status (live / lagging / dead), its last value, date and age in days; the source currently in use is marked with ►. If all Realized Cap sources go silent, the table shows FROZEN and a "data stale" alert fires — instead of silently plotting a frozen line.
DISPLAY
- Realized Price smoothed by MA (default EMA 30 as in the original; SMA / WMA / RMA / HMA / HEMA selectable), optional raw line
- Lower bands: −30% / −50% / −70% (green, accumulation zones)
- Upper bands: ×2 / ×3 / ×4 / ×5 (red, distribution zones)
- Background highlight when price crosses a band; band and signal logic unchanged from the original
- Synthetic MVRV = Market Cap / Realized Cap in the Data Window — replaces the dead ITB feed
ALERTS
Buy zone, Sell zone, Data stale.
NOTES
The coin is detected automatically from the chart ticker, so it works on any coin covered by CoinMetrics / Glassnode — not just BTC / ETH / LTC. On-chain metrics are daily; use on the D timeframe or higher.
==================================================================================
Основано на "Realized Price" от Baal Hadad (открытый код, MPL 2.0).
Оригинал опирался на фид MVRV от IntoTheBlock, который перестал обновляться 15 августа 2025 и помечен PulseWire как discontinued — индикатор замер.
Эта версия решает проблему каскадом источников данных и добавляет самодиагностику.
ЧТО ПОКАЗЫВАЕТ
Realized Price (реализованная цена) — средняя цена, по которой каждая монета в последний раз двигалась в блокчейне, то есть совокупная ончейн-себестоимость рынка. Когда спотовая цена уходит ниже реализованной, средний держатель в убытке — исторически это зоны капитуляции и потенциального дна цикла. Кратные превышения — зоны перегрева.
Realized Price = Realized Cap / Circulating Supply
ИСТОЧНИКИ ДАННЫХ (НОВОЕ)
Realized Cap, по приоритету: Custom-символ → CoinMetrics RealCap (напрямую) → Custom MVRV → IntoTheBlock MVRV (расчёт как Market Cap / MVRV).
Circulating Supply: Custom → Glassnode → IntoTheBlock → Market Cap / Price (несгораемый фолбэк).
Источник считается мёртвым, если не обновлялся N дней (по умолчанию 7, настраивается) — скрипт автоматически переключается на следующий живой. Можно принудительно выбрать конкретный источник или подключить свои символы.
ДИАГНОСТИКА (НОВОЕ)
Таблица на графике показывает статус каждого фида (live / lagging / dead), последнее значение, дату и возраст в днях; активный источник помечен ►. Если все источники Realized Cap замолчали, таблица показывает FROZEN и срабатывает алерт "data stale" — вместо того чтобы молча рисовать замороженную линию.
ОТОБРАЖЕНИЕ
- Realized Price, сглаженная скользящей средней (по умолчанию EMA 30, как в оригинале; на выбор SMA / WMA / RMA / HMA / HEMA), опционально сырая линия
- Нижние полосы: −30% / −50% / −70% (зелёные, зоны накопления)
- Верхние полосы: ×2 / ×3 / ×4 / ×5 (красные, зоны распределения)
- Подсветка фона при пересечении полос; уровни полос и логика сигналов не менялись
- Синтетический MVRV = Market Cap / Realized Cap в окне данных (Data Window) — замена умершему фиду ITB
АЛЕРТЫ
Зона покупки, зона продажи, протухание данных (data stale).
ПРИМЕЧАНИЯ
Монета определяется автоматически из тикера графика, поэтому индикатор работает на любой монете с покрытием CoinMetrics / Glassnode — не только BTC / ETH / LTC. Ончейн-метрики дневные; использовать на таймфрейме D и выше. Indicator
NIMBUS [ThrowMaster]NIMBUS — Ichimoku, Reimagined
Classic Ichimoku is brilliant at one question: "Where is the market right now — above, below, or inside equilibrium?" It is far weaker at a second question every trader actually asks: "What is the market about to do?" NIMBUS keeps the timeless Ichimoku framework intact and adds three dimensions built to close that gap — while staying, above all, honest about what it is: a context compass, not a signal service.
━━━━━━━━━━━━━━━━━━━━━━━━
WHAT NIMBUS ADDS
━━━━━━━━━━━━━━━━━━━━━━━━
⭐ Kumo Calendar — Twist Countdown
Here is a fact most traders overlook: the cloud in front of price is already fully drawn. It is built entirely from bars that have ALREADY closed, then shifted forward. That means the next Kumo twist — the moment Senkou Span A and B swap places — is knowable in advance. NIMBUS scans the forward cloud and counts the exact number of bars until that twist reaches price, and warns you when a thin (weak-support) section is approaching. Ichimoku's most-criticised trait, its lag, becomes a schedule you can read ahead of time.
🩵 Breath — Volume-Reactive Cloud
A traditional cloud shows only price geometry; two identical-looking clouds can hide wildly different conviction. NIMBUS makes the cloud breathe: it grows more solid on high-participation bars and fainter on quiet ones, using a rolling volume percentile. Strength becomes something you feel at a glance, not something you have to calculate. (If a symbol reports no volume, the cloud simply falls back to a fixed opacity — no errors, no false readings.)
🎯 Tenkan / Kijun Cross Clarity
The Tenkan–Kijun cross is one of Ichimoku's core events, yet on most charts it hides in a tangle of lines. NIMBUS marks it precisely: a teal circle at the exact price and bar of a bullish cross, coral for bearish. No hunting, no guessing.
◈ Alignment Hints
When four independent Ichimoku dimensions agree — price vs cloud, Tenkan vs Kijun, cloud colour, and the lagging read — AND price reclaims or loses the cloud on a confirmed bar, NIMBUS prints a small diamond. Think of it as a puzzle-game hint: a nudge to look at the right place at the right time. It is deliberately NOT a buy or sell command, and it never gives a target.
━━━━━━━━━━━━━━━━━━━━━━━━
HOW IT WORKS
━━━━━━━━━━━━━━━━━━━━━━━━
NIMBUS uses the standard Ichimoku engine — Tenkan (9), Kijun (26), Senkou Span A/B, and the lagging span, all fully adjustable. "Price vs cloud" always compares price to the cloud value formed 25 bars ago — the cloud actually sitting beneath price — so the reading reflects real, settled structure. The Breath layer reads a 100-bar volume percentile. The Twist Countdown walks the already-shifted forward cloud bar by bar. The dashboard summarises everything in one compact, theme-aware panel with a mobile Compact Mode.
━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO USE
━━━━━━━━━━━━━━━━━━━━━━━━
• Read the cloud for trend context: above = bullish structure, below = bearish, inside = balance/chop.
• Watch the Twist Countdown to anticipate when the cloud's support/resistance character is about to flip — useful for planning, not for firing blind.
• Let Breath tell you whether a move carries participation or is running on fumes.
• Treat Hints as a reason to zoom in and do your own analysis, never as an instruction.
• Combine with your own risk management. NIMBUS describes context; your plan decides the trade.
━━━━━━━━━━━━━━━━━━━━━━━━
ON REPAINTING (honest)
━━━━━━━━━━━━━━━━━━━━━━━━
Once a bar closes, every Tenkan/Kijun/Span value is fixed and never redrawn. Hints and cross circles are all confirmed on bar close, so a printed mark cannot later disappear. The forward cloud is built only from closed bars, so it is fixed the moment it appears. Like all Ichimoku tools, values on the CURRENT, still-forming bar update in real time until that bar closes — this is inherent to the framework, not hidden repainting, and it is documented directly in the code comments.
━━━━━━━━━━━━━━━━━━━━━━━━
WHAT MAKES IT ORIGINAL
━━━━━━━━━━━━━━━━━━━━━━━━
NIMBUS is not another line pack bolted onto Ichimoku. The Kumo Calendar reframes the forward cloud as a countdown rather than a static shape; Breath encodes participation into the cloud's opacity; and the whole tool is presented as an explicit, self-aware CONTEXT instrument — it tells you what the market is, and refuses to pretend it knows your trade. The code is fully open for you to read, study, and learn from.
━━━━━━━━━━━━━━━━━━━━━━━━
NOTE
━━━━━━━━━━━━━━━━━━━━━━━━
No indicator predicts the future or guarantees results, and NIMBUS makes no such claim. It is a decision-support and context tool. Markets involve risk; always use independent judgement and sound risk management. Not financial advice.
Indicator
Bitcoin Halving Cycle Strategy [Gabremoku]This script is a Bitcoin cycle timing indicator built around the historical halving structure.
The core idea is simple:
- define a Buy window a fixed number of days before each halving,
- define a Sell window a fixed number of days after each halving,
- project the next key dates directly on the chart.
The indicator does not try to predict price with oscillators, momentum formulas, or future-looking data. Instead, it focuses on a structural market rhythm that many Bitcoin traders monitor: the recurring supply shock created by halvings.
How it works
- The script uses known historical Bitcoin halving dates.
- It calculates a Buy date at halving minus N days.
- It calculates a Sell date at halving plus N days.
- It draws vertical reference lines for Buy, Halving, and Sell events.
- It plots historical labels on the actual event bars.
- It projects the upcoming Buy, Sell, and Halving labels forward to their own future dates on the chart.
- A dashboard summarizes the active cycle, next key date, and remaining days.
What makes this script useful
Most halving tools only mark the halving date itself. This script expands the concept into a complete cycle timeline by transforming each halving into three practical timing landmarks:
1. accumulation window before halving,
2. halving anchor point,
3. distribution window after halving.
This makes the script more useful for traders and investors who want a visual cycle map instead of a single event marker.
How to use it
- Apply it on BTCUSD or BTCUSDT.
- Daily and weekly charts are the most readable timeframes for this model.
- Use "Buy Days Before Halving" to control how early the accumulation window begins.
- Use "Sell Days After Halving" to control how long the post-halving window extends.
- Use the projected labels to monitor the next cycle dates in advance.
- Use the dashboard to read the current phase quickly.
Included features
- Historical halving timeline
- Buy and Sell event mapping
- Future projected labels positioned on future dates
- Optional cycle range highlighting
- Dashboard with next Buy, next Sell, next Halving, and countdown
- Custom colors and label controls
Important notes
- This script is a cycle visualization tool, not financial advice.
- It does not guarantee future market behavior.
- The projected future halving date is used as a timeline estimate for planning and visualization only.
- Past cycle behavior does not guarantee similar future performance.
- For clarity and to avoid misleading output, this script should be used on standard candlestick charts.
This publication is intended to provide a clean and practical timing framework for Bitcoin traders who study halving-driven market cycles rather than signal-based entry systems. Indicator
ICT Fractal SMT Divergence Engine [v6]
ENGLISH
🔥 ICT Fractal SMT Divergence & Auto-Triad Engine is a professional, high-precision PulseWire indicator designed for Smart Money Concepts (SMC) and Inner Circle Trader (ICT) methodology.
🎯 PURPOSE & CONCEPT
In institutional trading, SMT (Smart Money Technique) Divergence measures inter-market relative strength across correlated asset groups (Triads). When one asset in a triad sweeps liquidity by creating a new extreme ( Lower Low or Higher High ), while a correlated asset fails to sweep that extreme ( Higher Low or Lower High ), it reveals institutional accumulation/distribution and an imminent high-probability market reversal.
This indicator calculates SMT divergences strictly between confirmed Bill Williams / ICT Fractals , ensuring pixel-perfect visual precision on the chart with zero Y-axis displacement.
🧠 SMART AUTO-DETECT TRIAD ENGINE
The indicator automatically recognizes your current chart ticker and instantly pairs it with its exact correlated triad assets:
Crypto : Opening BTCUSDT.P, ETHUSDT.P, or any Altcoin automatically pairs BTCUSDT.P, ETHUSDT.P, and CRYPTOCAP:TOTAL3.
Forex : Opening EURUSD or GBPUSD automatically pairs the counterpart FX pair and DXY (with automatic inverse Dollar Index correlation).
Precious Metals : Opening XAUUSD (Gold) pairs XAGUSD (Silver) and PLATINUM. Opening XAGUSD pairs XAUUSD and PLATINUM.
US Stock Indices : Automatically correlates ES1! (S&P 500), NQ1! (Nasdaq), and YM1! (Dow Jones).
📖 HOW TO TRADE / USAGE RULES
Bullish SMT Setup (Long Bias) :
- Main asset breaks prior Fractal Low (Lower Low / Liquidity Sweep).
- Correlated triad asset holds its low (Higher Low).
- Execution: Look for bullish Market Structure Shift (MSS) or Fair Value Gap (FVG) entry.
Bearish SMT Setup (Short Bias) :
- Main asset breaks prior Fractal High (Higher High / Liquidity Sweep).
- Correlated triad asset holds its high (Lower High).
- Execution: Look for bearish Market Structure Shift (MSS) or Fair Value Gap (FVG) entry.
⚙️ COMPREHENSIVE SETTINGS & INPUTS EXPLANATION
Triad Preset Mode : Select between Auto Detect (Smart Triad), specific market presets, or Custom / Manual Tickers.
Asset 2 / Asset 3 Ticker (Custom) : Manual input for custom correlated assets when in Custom Mode.
Invert Asset 2 / Invert Asset 3 : Toggle for inversely correlated symbols (e.g., DXY vs EURUSD).
Fractal Length (Left/Right Bars) : Defines the fractal shoulder size (Default: 2 = classic 5-candle ICT Fractal).
Comparison Mode : Choose between Regular (High/Low wicks) or Hidden SMT (Close body prices).
Min / Max Distance (Bars) : Controls minimum and maximum bar separation between compared fractals.
Compare with Asset 2 / Compare with Asset 3 : Toggle individual asset divergence verification.
Visual Styling & HUD Dashboard : Customize colors, line thickness, label sizes, background glow, and dashboard HUD position.
Disclaimer: Trading financial markets involves substantial risk of loss. This indicator is designed for educational and analytical purposes to support SMC/ICT trading methodologies.
================================================================================
РУССКАЯ ВЕРСИЯ
🔥 ICT Fractal SMT Divergence & Auto-Triad Engine — это профессиональный высокоточный индикатор для трейдеров, торгующих по концепциям Smart Money Concepts (SMC / ICT) .
🎯 ПРЕДНАЗНАЧЕНИЕ И КОНЦЕПЦИЯ
В институциональном трейдинге SMT (Smart Money Technique) Дивергенция измеряет относительную силу между коррелирующими группами активов (Триадами). Когда один актив из триады обновляет ключевой ценовой уровень ( Lower Low или Higher High ), совершая снятие ликвидности (Liquidity Sweep) , а второй актив из триады отказывается обновлять свой экстремум (формируя Higher Low или Lower High ), это открывает институциональный след крупного игрока и указывает на скорый разворот рынка.
Индикатор строит дивергенции строго между подтвержденными фракталами Билла Вильямса / ICT , обеспечивая идеальную визуальную точность на графике без смещения меток по ценовой оси.
🧠 УМНЫЙ АВТО-ДЕТЕКТОР ТРИАД (SMART AUTO-DETECT)
Индикатор автоматически определяет открытый актив и мгновенно связывает его с правильной триадой:
Криптовалюта : При открытии BTCUSDT.P, ETHUSDT.P или любого альткоина автоматически подтягиваются коррелирующие активы: BTCUSDT.P, ETHUSDT.P и CRYPTOCAP:TOTAL3.
Валютные пары (Forex) : При открытии EURUSD или GBPUSD подтягивается парный валютный актив и DXY (с автоматической инверсией индекса доллара).
Драгоценные металлы : При открытии XAUUSD (Золото) автоматически подтягивается XAGUSD (Серебро) и PLATINUM. При открытии XAGUSD — XAUUSD и PLATINUM.
Фондовые индексы США : Автоматическое сравнение триады фьючерсов ES1! (S&P 500), NQ1! (Nasdaq) и YM1! (Dow Jones).
📖 РУКОВОДСТВО ПО ТОРГОВЛЕ И СИГНАЛЫ
Bullish SMT (Бычий SMT / Покупки) :
- Основной актив обновил предыдущий фрактальный лой (Lower Low / снял ликвидность).
- Коррелирующий актив из триады удержал лой (Higher Low).
- Вход в сделку: Ищите слом структуры (MSS / CHoCH) или имбаланс (FVG) на младшем таймфрейме для входа в лонг.
Bearish SMT (Медвежий SMT / Продажи) :
- Основной актив обновил предыдущий фрактальный хай (Higher High / снял ликвидность).
- Коррелирующий актив из триады удержал хай (Lower High).
- Вход в сделку: Ищите слом структуры (MSS / CHoCH) или имбаланс (FVG) на младшем таймфрейме для входа в шорт.
⚙️ ПОДРОБНЫЙ РАЗБОР ВСЕХ НАСТРОЕК
Triad Preset Mode : Выбор между Auto Detect (умное авто-определение), готовыми пресетами рынков или режимом Custom (ручной ввод).
Asset 2 / Asset 3 Ticker (Custom) : Поля для ручного ввода тикеров при включенном режиме Custom.
Invert Asset 2 / Invert Asset 3 : Включение инверсии для обратно коррелирующих активов (например, DXY против EURUSD).
Fractal Length (Left/Right Bars) : Размер плеча фрактала (по умолчанию 2 — классический 5-свечной фрактал ICT).
Comparison Mode : Режим сравнения: Regular SMT (сравнение по фитилям High/Low) или Hidden SMT (по закрытию тел Close).
Min / Max Distance (Bars) : Минимальное и максимальное расстояние в барах между сравниваемыми фракталами.
Compare with Asset 2 / Compare with Asset 3 : Включение/выключение проверки дивергенции по отдельным активам.
Visual Style & HUD Dashboard : Настройка цветов (Bull/Bear SMT), толщины линий, размера меток, подсветки фона и позиции таблицы на экране.
Отказ от ответственности: Торговля на финансовых рынках несет высокий риск. Данный индикатор создан для аналитических целей и поддержки решений по SMC / ICT концепциям. Indicator
Projected Volume (Intraperiod Estimate)Projected Volume (Intraperiod Estimate)
════════════════════════════════════════
OVERVIEW
Projected Volume replaces the standard volume study with a live, forward-looking
estimate of where the current bar's volume is likely to finish. Volume is only
known with certainty once a bar closes, which makes it hard to judge in real time
whether the bar in progress is trading heavy or light. This indicator solves that
by drawing the volume already traded as a solid column and projecting the
remaining, not-yet-traded volume as a hollow cap on top — so the anticipated
final volume of the developing bar is visible at a glance. The projection is
rebuilt on every update of the live bar and adapts to your chart timeframe and to
the data your subscription can access.
WHAT IT PLOTS
• Directional volume columns on every bar — green when close ≥ open, red when
close < open (the standard volume read you already use).
• On the current, unfinished bar only:
– a solid column for the volume traded so far;
– a hollow outline extending from the top of the solid column up to the
projected final volume;
– an optional label with the projected total and the percent of the period
elapsed.
As the bar fills in, the solid portion grows and the hollow cap shrinks toward
zero. At the close, projected equals actual.
HOW THE PROJECTION WORKS
The indicator uses two methods and selects between them automatically based on
whether sub-bar (intrabar) data is available.
1) Intraperiod volume profile — primary method
For each of the last N completed bars, the script requests lower-timeframe
volume and measures how volume accumulates through the period: what fraction of
the period's total volume is typically complete by the end of each time-slice —
the classic "how much of the day's volume is usually done by the first hour, the
second hour…" shape. That cumulative curve is averaged across the lookback window
to form a typical accumulation profile.
For the developing bar the script determines how far through the period it has
progressed, reads the typical cumulative fraction f at that point, and estimates:
projected total = volume so far ÷ f
Because the profile captures the real intraperiod shape — the U-shaped session
volume common in equities, or the flatter distribution of 24/7 crypto — the
estimate reflects typical behavior rather than assuming volume arrives at a
constant rate.
2) Average-of-increment — base-resolution fallback
When the chart is already at the lowest interval your data plan provides (for
example a 1-minute chart on a plan without seconds data), there is no sub-bar to
sample and the profile method does not apply. In that case the script projects:
projected total = volume so far + (1 − elapsed) × average volume of last N bars
This equals a typical bar early in the period, tracks the realized volume as the
bar fills, always sits at or above the volume already traded, and converges to
the actual figure at the close. It requires no lower-timeframe data and cannot
error. Elapsed time is measured from the clock, so no sub-bar feed is needed.
Automatic method selection
The script detects whether a usable lower timeframe exists that your plan can
serve. If so, it uses the profile method — and floors sub-sampling at one minute,
so 5m / 15m / 1h charts still build a genuine profile from 1-minute intrabars. If
not, it uses the average-of-increment fallback. The active method is shown in the
on-chart label, where a "· avg" suffix denotes fallback mode.
SETTINGS
• Intraperiod slices (12 / 24 / 48) — number of time-slices used to model the
accumulation curve within each period. 24 is roughly hourly on a daily chart.
• Lookback periods — number of completed bars averaged for the profile and the
fallback average (default 30).
• Auto sub-period timeframe — when on, the script chooses the intrabar sampling
resolution automatically. Turn off to set it manually.
• Manual sub-period timeframe — used when Auto is off; must be lower than the
chart timeframe.
• Allow seconds sub-sampling — off by default. Enable only if your plan provides
seconds data; when off, the script never requests sub-minute data and therefore
cannot error on a 1-minute chart.
• Min % elapsed before projecting — suppresses unstable projections in the
opening moments of a new bar.
• Up / Down volume colors and a toggle for the projection label.
READING THE LABEL
The label reads, for example, "Proj 1.2M (35% elapsed)" — the projected final
volume and how far the current period has progressed. A "· avg" suffix indicates
the average-of-increment fallback is active because intrabar data is unavailable
at that resolution.
BEHAVIOR, NOTES & LIMITATIONS
• Real-time by design. The projection exists only on the current, unfinished bar
and recalculates as that bar develops. Historical bars display actual traded
volume only — the indicator does not restate closed bars, but the live estimate
moves tick to tick as new volume arrives. This is expected behavior for a
forward projection, not hidden repainting.
• It is an estimate, not a guarantee. Accuracy is lowest in the first fraction of
a new bar and improves as the bar fills; the "Min % elapsed" input guards the
earliest, noisiest moments.
• The profile method depends on intrabar data availability, which varies by
symbol and subscription. Where it is unavailable, the indicator degrades
gracefully to the average-based method.
• Works across asset classes and timeframes. Because elapsed progress is measured
from intrabar count where available (and otherwise from the clock), it adapts to
both continuous (crypto) and session-based (equities/futures) markets.
• Volume reflects the data feed of the chart's symbol; index or aggregated tickers
may report volume differently from a single exchange.
CONCEPT
The tool pairs a standard directional volume histogram with an
intraperiod-accumulation model and presents the realized-versus-projected split
visually as a filled column plus a hollow cap. The aim is a single, glanceable
read on whether the bar in progress is on pace to finish heavy or light relative
to recent norms. Indicator
Indicator
Volume Flow MatrixVolume Flow Matrix is a relative volume histogram that helps identify how strong or weak current market participation is compared to recent volume activity.
The indicator measures current volume against a fixed 300-bar volume baseline. Instead of showing raw volume only, it converts volume into a relative reading. This makes it easier to see whether the current candle is trading below average volume, around normal activity, with increased participation, or at an unusually high volume level.
On historical candles, the calculation uses completed candle volume. On the live candle, the indicator uses realtime volume projection. This means the current candle’s volume is estimated based on how much time has passed in the candle. As a result, the histogram can react during the candle instead of only after the candle closes.
The histogram is divided into five volume conditions:
Dry Volume shows candles with weak participation. These bars appear when relative volume is below 0.75. Dry volume can be useful for spotting quiet market phases, low-interest candles, or areas where price is moving without strong volume support.
Default Volume represents normal volume conditions. These candles do not meet the requirements for dry, directional, or extreme volume. Default volume helps separate ordinary market activity from more important volume events.
Bull Volume appears when relative volume is elevated and the candle also shows bullish pressure. For a candle to qualify as Bull Volume, relative volume must be at least 1.55, the candle must close above its open, and the close must be positioned in the upper part of the candle range. This can help highlight candles where stronger participation supports upward pressure.
Bear Volume appears when relative volume is elevated and the candle shows bearish pressure. For a candle to qualify as Bear Volume, relative volume must be at least 1.55, the candle must close below its open, and the close must be positioned in the lower part of the candle range. This can help highlight candles where stronger participation supports downward pressure.
Extreme Volume marks unusually high relative volume at or above 2.30. These candles show that volume is significantly above the recent baseline. Extreme Volume does not automatically mean bullish or bearish continuation. It should be read together with price location, candle structure, support and resistance, liquidity zones, or the broader market context.
Each candle is assigned to only one volume condition. The script checks the conditions in a fixed order so the histogram remains clean and does not stack multiple volume types on the same bar.
How to use it:
Use Dry Volume to identify low-participation areas where price movement may be less reliable.
Use Bull Volume and Bear Volume to confirm whether directional candles are supported by stronger participation.
Use Extreme Volume to mark important high-activity candles that may appear near breakouts, liquidity grabs, absorption areas, reversals, or strong continuation moves.
Use Default Volume as the neutral background state between low-volume and high-volume conditions.
Volume Flow Matrix does not provide trade entries or exits by itself. It is designed to support analysis by making volume behavior easier to read. The strongest use case is combining it with price action, market structure, key levels, liquidity, trend context, or any existing trading plan.
Indicator
Portfolio Treemap [invincible3]Portfolio Treemap
Portfolio Treemap is a visual portfolio monitoring dashboard designed to help traders and investors track multiple holdings directly on the PulseWire chart.
The indicator allows users to enter up to 20 instruments, including stocks, ETFs, crypto pairs, forex symbols, or other PulseWire-supported assets. For each instrument, the user can define the buy price and number of shares or units held. The script then calculates the live market value, cost basis, unrealized profit/loss, and percentage return using real-time chart data.
The dashboard uses a treemap-style layout where larger boxes represent larger portfolio weight based on the selected ranking mode. Box colors show unrealized performance: green for profitable positions and red for losing positions. The stronger the profit or loss percentage, the stronger the color intensity. Empty cells are blended with the chart background for a cleaner and more professional visual appearance.
Key Features:
• Track up to 20 portfolio instruments
• User-defined portfolio name
• Input symbol, buy price, and shares/units for each holding
• Real-time portfolio value, cost, and unrealized P/L
• Treemap-style visual dashboard
• Profit and loss color gradient
• Green boxes for winning positions
• Red boxes for losing positions
• Dynamic text color for light and dark themes
• Empty cells blend with chart background
• Supports stocks, ETFs, crypto, forex, commodities, and indices
• Adjustable dashboard position and size
• Optional portfolio header
• Multiple box-ranking modes: shares, position value, absolute P/L, and absolute P/L %
How to Use:
1. Add the indicator to your chart.
2. Open the indicator settings.
3. Enter your portfolio name.
4. Select each portfolio symbol.
5. Add your average buy price.
6. Add your number of shares or units.
7. Choose how boxes should be ranked: by shares, position value, absolute P/L, or absolute P/L percentage.
8. Use the dashboard to monitor portfolio performance visually.
Color Logic:
• Green = position is in profit
• Red = position is in loss
• Stronger color = larger percentage move
• Neutral color = near breakeven
• Empty spaces blend with the chart background
Important Notes:
For best results, use instruments quoted in the same currency. Mixing assets quoted in different currencies may make the total portfolio value and P/L less accurate unless the user manually adjusts values.
This indicator is intended for portfolio visualization and monitoring only. It does not provide buy or sell signals and should not be treated as financial advice. Always confirm portfolio values with your broker or exchange.
Indicator
Crypto: Macro Heatmap [invincible3]Crypto Macro Heatmap is an automatic market-regime dashboard designed to summarize crypto macro conditions using liquidity, leverage, breadth, and risk-participation metrics.
The indicator converts multiple market data sources into normalized 0–100 scores and displays them in a structured heatmap table. It is built to help traders quickly understand whether the broader crypto environment is risk-on, neutral, or risk-off.
Main dashboard sections:
1. Liquidity
Tracks Global M2, total crypto market cap, USDT dominance, and BTC volume confirmation. Higher liquidity scores generally suggest stronger macro support for crypto markets.
2. Leverage
Tracks open interest pressure, funding-risk proxy, liquidation-risk proxy, and OI acceleration. Higher leverage scores mean higher stress or crowding risk.
3. Breadth
Tracks TOTAL2, TOTAL3, BTC dominance, ETH dominance, and altcoin participation. This section helps identify whether market strength is broad or concentrated.
Key features:
* Fully automatic scoring
* No manual market-score inputs
* Dashboard show/hide checkbox
* Light/dark chart theme detection
* Composite regime score
* Regime meter
* Market phase detection
* Risk-state classification
* Confidence score
* Section delta versus 7 days ago
* Fixed-width heatmap layout for cleaner visual alignment
The composite score combines liquidity support, market breadth, and leverage-adjusted risk into one regime reading. The dashboard is intended for macro context and regime analysis, not direct buy or sell signals.
Use this tool as a higher-timeframe market filter together with your own technical analysis, risk management, and trading system.
Disclaimer: This indicator is for educational and analytical purposes only. It does not provide financial advice. Always do your own research and manage risk carefully.
Indicator
Indicator
Hamppu - Flow EngineHamppu - Flow Engine is an open-source crypto intraday context engine built in Pine Script v6.
It is designed to help read market context, not to provide standalone buy/sell signals.
The script combines multi-layer RSI regime logic, RSI compression/release, WaveTrend-style stretch reclaim/reject context, liquidity sweep quality scoring, displacement after sweep, HTF with-flow / counter-flow classification and a dynamic MTF Flow Stack.
The goal is transparency. Markers are not magic signals. They are context events that help show when momentum, liquidity and higher-timeframe flow may be interacting.
Core features:
- Multi-layer RSI momentum regime
- RSI compression and directional release
- WaveTrend-style stretch reclaim/reject context
- Liquidity sweep quality scoring
- Displacement after sweep
- HTF with-flow / counter-flow classification
- MTF Flow Stack with selectable 3–6 timeframe slots
- Curated profiles: Balanced, Degen Fast, Conservative, Research and Custom
- Optional source labels for studying RSI / WaveTrend / Degen Fast marker sources
Visual language:
- Background color shows local RSI regime.
- Marker color shows HTF alignment.
- MTF Flow Stack shows broader multi-timeframe momentum context.
Marker guide:
- Triangle = early momentum reclaim/reject context
- Circle = momentum release after RSI compression
- X = compression release / compression ended
- Heart = Flow Context: sweep + displacement + momentum
- Orange marker = counter-flow / HTF disagreement
Profiles:
Balanced is the default public profile.
Degen Fast is a faster 5m/15m profile with early reclaim behavior.
Conservative is stricter and produces fewer context events.
Research is a looser exploration profile.
Custom is for manual tuning.
Important:
Balanced, Degen Fast, Conservative and Research are curated presets. These presets may override selected sensitivity controls internally, including sweep thresholds, cooldowns, compression tightness and confirmed/live behavior.
Use Profile = Custom if you want manual control over the visible sensitivity inputs.
Suggested workflow:
1. Start with Balanced.
2. Read the background regime first.
3. Check marker color for HTF alignment.
4. Use the MTF Flow Stack to understand broader context.
5. Treat markers as context events, not automatic entries.
6. Use your own price action, risk management and invalidation.
Alerts:
Alerts focus on main context events and with-flow reclaim/reject events. Not every visual marker has a separate alert. For more stable alerts, use bar-close alert settings.
Stability note:
When confirmed HTF is active, HTF Bias uses the previous closed HTF candle. Current chart timeframe values can still update while the active candle is open.
License: MIT.
This script is published for educational/open-source purposes. It does not provide financial advice. Indicator
Bitcoin Compressing Power Law ChannelBitcoin Compressing Power Law Channel
Most Bitcoin power-law channels draw bands of a fixed width around a long-term trendline. This one is different: the channel width is not constant. It starts wide and compresses exponentially as Bitcoin matures, modeling the idea that long-term volatility around the trend tends to shrink over time. That decaying width is the core idea of this indicator.
Why a compressing channel
A standard power-law channel assumes the spread between its upper and lower bounds stays the same across Bitcoin's entire history. In practice, an asset's relative volatility tends to fall as it grows larger and more liquid. This indicator captures that by letting the channel narrow over time toward a configurable floor, so the bounds reflect a maturing market rather than a permanently fixed range.
How it works
The model assumes log(price) scales linearly with log(days since the genesis block), producing a fair-value trendline: logFair = intercept + slope * log10(days). A lower bound is offset below that line, and the upper bound is placed above the lower bound at a distance set by the channel width.
The width itself is the original part: width = minWidth + startWidth * exp(-decaySpeed * yearsSinceGenesis). Early in Bitcoin's history the exponential term is large and the channel is wide. As years pass, that term shrinks toward zero and the width converges to a minimum floor (minWidth). The result is a channel whose envelope tightens over time instead of staying fixed.
What it plots
Three lines in price space (upper, middle, lower) with a shaded fill between the upper and lower bounds. Optionally, a 200 SMA of the current timeframe and a 200 SMA from the weekly timeframe, each toggleable. The weekly SMA is requested from a higher timeframe with lookahead disabled, so it does not repaint using future data. A normalized "Decay Channel Oscillator" is exposed in the Data Window, showing where the current close sits within the channel on a 0 to 1 scale (0 = lower bound, 1 = upper bound).
Inputs
Every model parameter is adjustable: the genesis date, the power-law intercept and slope, the lower offset, the initial and minimum channel widths, and the decay speed that controls how fast the channel compresses. Colors for each line, the fill, and both SMAs are configurable.
How to use it
Apply it to a Bitcoin chart on a longer timeframe such as Daily or Weekly, where a power-law model is most meaningful. The middle line is the model's central estimate; the upper and lower lines describe the expected long-term range, narrowing as time goes on. The Data Window oscillator lets you read how stretched price is within the channel numerically.
Parameters and calibration
The default intercept and slope are starting values that approximate Bitcoin's historical power-law fit. They are not fixed truths. You should re-evaluate them and adjust them, along with the offset, widths, and decay speed, to suit your own analysis and the data range you are studying. Different calibrations will move the channel and change how aggressively it compresses.
Limitations and cautions
This is a model, not a prediction. The power-law relationship is an empirical observation that may break down at any time, and the decay parameters are assumptions, not facts. The compressing width is a hypothesis about volatility maturing over time; it may not hold. This indicator is built for Bitcoin and is not intended for other assets. Nothing here forecasts future prices, and the past behavior of the channel does not guarantee anything about how price will behave going forward.
The code is open-source under the Mozilla Public License 2.0. You are welcome to study it and build on it. Indicator
Indicator
Crypto Ultimate Indicator v2═══════════════════════════════════════════════
CRYPTO ULTIMATE INDICATOR (CUI)
═══════════════════════════════════════════════
A multi-layer confluence system for crypto traders. Stacks 12+ independent technical layers — trend, momentum, volume, regime, multi-timeframe bias, and Smart Money Concepts — and fires Buy/Sell signals only when enough of them agree. Every signal comes with a confidence score, three take-profit levels, position size recommendation, and live outcome tracking.
Built for 4H and Daily crypto charts. No proprietary "secret sauce" — every component is documented and every input is exposed.
━━━━━━━ WHY THIS EXISTS ━━━━━━━
Most multi-indicator scripts stack correlated trend filters (more EMAs, more oscillators) and call it "confluence." That just adds the illusion of agreement without adding independent information.
CUI's filter stack is built from genuinely different signal sources, so when they align, that alignment carries real weight:
• Trend regime — HMA + Supertrend + EMA Ribbon
• Momentum — RSI with proper pivot-to-pivot divergence
• Volume flow — body-weighted Volume Delta + CVD divergence
• Volatility state — Bollinger squeeze + squeeze-release timing
• Market structure — composite of ADX, Choppiness Index, BB-width percentile
• Multi-timeframe — weighted Daily / Weekly / Custom HTF (all offset, no repaint)
• Liquidity & gaps — Fair Value Gaps + Liquidity Sweep detection
• External context — optional BTC trend filter for alt trading
A Buy or Sell only fires when the relevant subset of these align. A built-in "Why-Not" diagnostic table shows you exactly which filter is blocking a near-signal at any moment — turning the indicator into a tunable system rather than a black box.
━━━━━━━ CORE FEATURES ━━━━━━━
TREND & MOMENTUM
▸ Hull Moving Average (configurable length)
▸ Supertrend with ATR factor
▸ 5-EMA Ribbon (8/13/21/34/55) with stacking score
▸ RSI with consecutive-pivot divergence detection
▸ MACD and Stochastic RSI (data window)
VOLUME
▸ Body-weighted Volume Delta (not naive close-position)
▸ Cumulative Volume Delta (CVD)
▸ CVD divergence at confirmed pivots
VOLATILITY & REGIME
▸ Bollinger Bands with squeeze detection and release timing
▸ Composite regime classifier (ADX × CHOP × BB-width)
▸ Background tint for trending vs ranging states
▸ Regime transition labels
SMART MONEY CONCEPTS
▸ Fair Value Gap zones (bullish and bearish)
▸ Liquidity Sweep detection
MULTI-TIMEFRAME
▸ Daily / Weekly / User-defined custom HTF
▸ Weighted confluence score (D 1.0x + W 1.5x + Custom 0.75x)
▸ Optional HTF pivot-based S/R lines
BTC CONTEXT (for alt traders)
▸ Optional BTC trend filter
▸ Relative strength vs BTC
SIGNAL ENGINE
▸ 0-100 confidence score
▸ Configurable minimum confidence threshold
▸ Auto-tune presets (Aggressive / Balanced / Conservative / Custom)
▸ Confirmation bar requirement
▸ Minimum spacing between signals
TRADE MANAGEMENT
▸ Three take-profit levels (TP1/TP2/TP3) with configurable ATR multipliers
▸ Custom % allocation per target
▸ Adaptive SL/TP — different distances in trending vs ranging conditions
▸ Break-even stop activation after TP1
▸ Chandelier ATR trailing stop on runner portion
▸ Position size calculator (account size × risk % × confidence multiplier)
LIVE TRACKING & DIAGNOSTICS
▸ Main dashboard with all current state
▸ Signal log table — last N trades with live TP/SL outcomes
▸ Why-Not diagnostic — which filter is currently blocking each direction
▸ Regime stats — win rate broken down by trending vs ranging
ALERTS
▸ 15+ classic alertcondition triggers
▸ Optional JSON webhook payload for bot integration
━━━━━━━ HOW A BUY SIGNAL FIRES ━━━━━━━
All of the following must be true on the signal bar:
1. HMA trending up
2. RSI above 50
3. Volume delta positive
4. EMA Ribbon score ≥ +3 (at least 4 of 5 aligned bullish)
5. Supertrend bullish
6. HTF confluence score ≥ +1.5
7. Confidence score ≥ user minimum
8. BTC trend bullish (if BTC filter enabled)
9. Price not inside opposing FVG zone (if FVG filter enabled)
10. Market not in strong ranging mode
11. Price more than 0.5 ATR from upper resistance zone
12. Candle body > 50% of range
13. Minimum bars elapsed since last signal
14. Confirmation bar (if enabled)
A Sell signal requires the inverse. On 4H BTC expect roughly 1-3 signals per week in normal conditions. If you see fewer, drop the confidence floor or switch to the Aggressive preset.
━━━━━━━ RECOMMENDED USE ━━━━━━━
▸ Primary: 4H on BTC/USDT, ETH/USDT, and majors
▸ Also works: Daily, 12H, 8H
▸ Use caution below 1H — noise increases, news spikes can trigger wicks
▸ Low-liquidity alts: bump ATR period to 21
WORKFLOW
1. Start on the Balanced preset
2. Watch the dashboard and Why-Not panel for a few sessions
3. Adjust the confidence floor based on signal frequency
4. Enable Regime Stats after chart history accumulates
5. For bots: enable JSON webhook alerts, route via "Any alert() function call"
━━━━━━━ REPAINT DISCLOSURE ━━━━━━━
Full transparency on what does and doesn't repaint:
▸ HMA, Supertrend, EMA Ribbon: repaint on the developing current bar (use bar-close confirmation for live trading)
▸ HTF confluence (D/W/Custom): all use offset — fetch last closed HTF bar only — NO intra-period repaint, NO lookahead
▸ RSI and CVD divergence labels: plotted at confirmed pivot bar (5 bars after the actual pivot). Do NOT appear and disappear.
▸ FVG zones: drawn on confirmation bar of the 3-bar gap pattern. Do not repaint once drawn.
▸ Liquidity sweeps: detected on bar close
▸ Trade outcomes (signal log): evaluated on each closing bar
▸ Regime transition labels: confirmed on bar close
━━━━━━━ HONEST LIMITATIONS ━━━━━━━
▸ This is a decision-support tool, not a complete trading system. Risk management, position discipline, and execution matter more than any indicator.
▸ Signal outcomes in the Regime Stats table are based on bar-close evaluation. Real-fill slippage is not modeled.
▸ Volume Delta is approximated from candle structure, not true tick-level bid/ask (PulseWire doesn't expose that without premium feeds).
▸ FVG and liquidity sweep are simplified interpretations of those concepts — pure SMC purists may prefer dedicated tools.
▸ The regime classifier is a heuristic composite. It works well on liquid crypto pairs but can lag at sharp inflection points.
▸ Past performance does not predict future results.
━━━━━━━ SETTINGS OVERVIEW ━━━━━━━
The script has many inputs, grouped by function. For first-time users, the most important groups are:
▸ Preset & Theme → pick Balanced to start
▸ UI Sizing → table text and label sizes
▸ Signal Engine → set Minimum Confidence Score
▸ Tiered Exits → TP/SL multipliers and % allocation
▸ Position Sizing → account size and risk per trade
▸ Alerts & Webhooks → enable JSON for bot trading
Default state shows a clean chart: HMA, Supertrend, BB, regime tint, signal labels, plus three tables (dashboard, signal log, HTF panel). Everything else is one toggle away — EMA Ribbon, FVG boxes, ATR zones, HTF S/R lines, CVD divergence labels, sweep markers, Why-Not diagnostic, Regime Stats.
━━━━━━━ WHAT'S NOT INCLUDED ━━━━━━━
▸ Full strategy() backtest — this is an indicator(). A companion strategy script may be released separately.
▸ Funding rate / open interest overlays — require specific tickers not universally available
▸ Chart pattern recognition (H&S, wedges, etc.)
━━━━━━━ CREDITS ━━━━━━━
Built on Pine Script v6. Uses PulseWire built-ins: ta.supertrend, ta.dmi, ta.bb, ta.macd, ta.rsi, ta.pivothigh, ta.pivotlow, ta.valuewhen. Choppiness Index, CVD, FVG detection, liquidity sweep logic, regime classifier, confidence scoring, trade tracking, and confluence weighting are custom implementations.
═══════════════════════════════════════════════
Indicator
Elaris Fast Scalp ProElaris Fast Scalp Pro is a professional lower-timeframe scalping indicator designed for fast-moving markets such as crypto, forex, and indices. The indicator combines trend alignment, momentum confirmation, volatility filtering, VWAP positioning, volume strength, and higher-timeframe confirmation into a clean non-repainting scalping system.
Built specifically for aggressive intraday traders, the script focuses on identifying high-quality momentum continuation opportunities while filtering out weak or choppy conditions that commonly generate false signals on lower timeframes.
The signal engine uses:
Fast EMA reclaim logic
Trend structure filtering
RSI momentum confirmation
ADX trend-strength filtering
VWAP positioning
Volume expansion validation
ATR-based volatility quality checks
Optional higher-timeframe directional confirmation
Cooldown logic to reduce over-signaling
The indicator also includes:
Professional dashboard panel
Real-time market condition overview
Risk/reward visualization
Dynamic stop loss and take profit levels
Configurable session filtering
Long and short signal alerts
Dark and light mode compatibility
Elaris Fast Scalp Pro is optimized for:
1m / 3m / 5m / 15m charts
Crypto scalping
Fast intraday momentum trading
Session breakout continuation moves
Trend-following scalp setups
Unlike many repainting scalping systems, all signals are confirmed only after candle close, making the indicator suitable for live trading and alert automation.
Features
Non-repainting confirmed signals
Fast scalp continuation engine
Smart trend filtering
Built-in volatility protection
Volume confirmation system
Optional HTF bias filter
VWAP institutional bias filter
Risk/reward plotting
Signal quality scoring
Professional dashboard UI
Fully customizable inputs
Best Usage
The indicator performs best during active market sessions with strong momentum and healthy volatility conditions. Lower-timeframe traders may combine it with market structure, liquidity zones, or session trading concepts for additional confirmation. Indicator
Indicator
Long-Term Cycle Valuation MapLong-Term Cycle Valuation Map is an educational indicator designed to visualize long-term crypto market valuation and cycle conditions.
The script does not generate buy or sell signals. It does not predict exact tops or bottoms. Its purpose is to help users observe whether the market is in a deeper reset, rebuild, neutral, late expansion, or exhaustion-risk environment.
The indicator combines several long-term market-regime components into one normalized Cycle Valuation Score.
The model uses:
1. 365D Moving Average Multiple
This measures price relative to its 365-day moving average. It helps visualize whether price is extended above or depressed below a long-term mean.
2. RSI(100) on 2D
This measures slower momentum conditions using a long RSI setting on a 2-day timeframe.
3. Long-Term Bollinger Bandwidth
This measures long-term volatility compression and expansion using a 365-day Bollinger Bandwidth structure.
4. Market Attention Proxy
This is not Google Trends data.
It is a market-based activity proxy using volume, volatility, and range expansion. Its purpose is to estimate whether market activity is quiet, normal, elevated, or overheated from price and volume behavior.
Customization:
Each component can be turned on or off.
Users can also adjust the relative strength of each component through percentage inputs.
The default public configuration is:
365D Moving Average Multiple: 30%
RSI(100) on 2D: 30%
Long-Term Bollinger Bandwidth: 30%
Market Attention Proxy: 10%
The weights do not need to add up to exactly 100. The script automatically normalizes the active components.
If a component is disabled, or if it does not have enough historical data yet, it is excluded from the active score.
The table shows how many components are active.
The final output is a normalized Cycle Valuation Score between 0 and 100.
General interpretation:
Below 15:
Deep reset zone
15-90:
Broad cycle range. This can include rebuild, neutral, and late expansion conditions.
Above 90:
Exhaustion-risk zone
The score should not be used as a standalone trading system.
A low score does not mean price must immediately rise.
A high score does not mean price must immediately fall.
Markets can remain in the same regime for extended periods.
The script is intended for higher-timeframe market-structure analysis. It is best used on multi-day, weekly, and monthly charts.
On early historical bars, the score may use fewer available components until all long-term calculations have enough history. The table shows how many components are active.
This indicator combines common long-term market measures into a single normalized framework. Its usefulness comes from organizing valuation, momentum, volatility, and market-activity conditions into one cycle-regime score.
Repainting:
The script does not use future data or lookahead logic.
Values on the currently open candle may update until that candle closes.
Limitations:
The script does not forecast future prices.
It does not guarantee cycle tops or bottoms.
It does not provide trade entries or exits.
It should not be used as a standalone trading decision tool.
Intended use:
Educational long-term market-structure and cycle-valuation analysis. Indicator
VWAP Daily Bands StandardVWAP Daily Bands is a volume-weighted average price indicator anchored to the daily session, enhanced with adaptive standard deviation bands designed to work accurately across all asset classes — including Forex, Crypto, Commodities, Indices, and Stocks.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
THE PROBLEM THIS INDICATOR SOLVES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Most VWAP band implementations calculate standard deviation using only intraday price variance. This creates a well-known flaw: at the start of each session, when very few bars have been processed, the bands collapse to near zero and are practically useless. As the session progresses, the bands gradually widen — but asymmetrically, because early price swings distort the variance calculation.
This indicator solves that with a fixed daily ATR seed.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW THE ATR SEED WORKS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Before the session opens, the indicator fetches the previous day's closing price and ATR from the daily timeframe. These two fixed values are used to calculate a minimum band width that holds constant throughout the entire trading day — it does not fluctuate with intraday price movement.
The standard deviation used for the bands is then taken as the larger of two values: the real-time intraday price variance, or the fixed ATR-based seed variance. This means the bands are always at least as wide as the prior day's volatility warrants, while still expanding naturally when intraday price action is more volatile than usual.
The result is symmetric, stable bands from the very first bar of the session.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PROXY VOLUME ENGINE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Many brokers and CFD platforms do not provide real volume data. Without volume, a VWAP calculation loses its core meaning.
This indicator includes a built-in Proxy Volume Engine that automatically detects the current symbol and maps it to a liquid equivalent source with real volume data. For example, XAUUSD is mapped to COMEX:GC1!, EURUSD to FX:EURUSD, BTCUSD to BINANCE:BTCUSDT, and so on — covering over 80 symbols across all major asset classes. If the platform provides native volume, it is used directly. If not, the proxy volume is applied transparently with no action required from the user.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHAT IS PLOTTED
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• VWAP (white) — daily anchor VWAP calculated from HLC3, reset at the start of each session, weighted by effective volume.
• Upper bands (cyan) — 1σ, 2σ, and 3σ above the VWAP, indicating potential resistance or overbought zones.
• Lower bands (red) — 1σ, 2σ, and 3σ below the VWAP, indicating potential support or oversold zones.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SETTINGS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Show Daily VWAP — toggle the VWAP line on or off.
• Show Band 1σ / 2σ / 3σ — toggle each band pair individually.
• Band Width Multiplier — scales all bands up or down proportionally (default 1.0).
• Daily ATR Period — controls how many days are used to calculate the ATR seed (default 5).
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
COMPATIBLE WITH
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Forex majors, minors and exotics · Crypto (via Binance) · Gold, Silver, Platinum, Palladium · Oil and Natural Gas · Agricultural commodities · US Dollar Index · Major global indices: DOW, NASDAQ, S&P 500, Nikkei, DAX, FTSE, CAC, MIB, ASX, Hang Seng · Top US and European stocks.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The VWAP calculation uses Pine Script's native HLC3-based volume-weighted average price as its mathematical foundation. The ATR seed mechanism, Proxy Volume Engine, and adaptive band logic are original contributions developed specifically for this indicator to address real limitations found in standard VWAP band implementations. Indicator
