CrosswindCROSSWIND
Crosswind is a signal and trade management indicator built on EMA crossovers, but the crossover itself is only the starting point. Most crossover systems break down in two predictable places. They enter on the cross, which is very often the worst price in the whole move, and they exit at a fixed percentage target, which caps the rare large trends that are supposed to pay for all the small losers. Crosswind addresses both problems and then reports every result net of trading costs, so you can judge whether an edge actually survives the fee schedule.
THREE TIMEFRAME PRESETS
Selecting a trading style sets the EMA pair for you. 15 Min Scalping uses 9 and 21. 1 Hour Swing uses 13 and 48. Daily Trend uses 15 and 150. The preset also sets the width of the trailing stop, since noise that is meaningless on a daily chart will repeatedly eject you from a position on a 15 minute chart.
TREND FILTER
A 200 period SMA gates direction. Long signals are only considered while price trades above it and short signals only while price trades below it. The chart background shades faint green above and faint red below so the active regime is visible at a glance.
TWO SIGNAL MODES
Crossover mode fires when the fast EMA crosses the slow EMA in the direction of the trend filter.
Pullback mode waits. After the fast EMA crosses above the slow EMA, no signal is issued yet. The indicator waits for price to retrace into the slow EMA and then close back across it, within a window of bars that you control. You are buying the first dip after trend confirmation rather than the extension itself. Fewer signals, but a materially better average entry, and your initial stop sits closer to structure.
OPTIONAL MACD CONFIRMATION
A standard MACD can be required to agree with the signal direction. It reduces frequency and filters some counter momentum entries.
HOW A TRADE IS MANAGED
Risk is measured in R, where 1R is the initial stop distance of 2x ATR. Every number the indicator reports is expressed in these units, which makes results comparable across symbols and volatility regimes.
A trade passes through three stages.
Initial stop. Placed 2x ATR from entry. Nothing moves while the trade is proving itself.
Breakeven. Once the trade reaches 1R in your favour, the stop advances to entry plus the full round trip cost plus a small cushion. This is a real breakeven, not a nominal one, so a trade stopped at this stage does not quietly book a small loss.
Trail. Once the trade reaches 1.5R, a chandelier trail arms. It tracks the highest high reached since entry, offset by an ATR multiple, and it only ever ratchets in your favour. The stop line turns blue when the trail is live, so the current stage is always obvious on the chart.
There is no fixed profit target by default. A winning trade runs until the trail takes it out. If you want a cap for comparison purposes you can set a hard target expressed in R.
An alternative EMA trail is included, which follows the slow EMA with an ATR buffer, for traders who prefer a moving average exit.
COST ACCOUNTING
Fees and slippage are charged per side against the actual entry and exit prices, so cost scales properly with price rather than being a flat assumption. Funding is optional and charged per eight hours held, scaled by your chart timeframe. Defaults assume 0.06 percent taker fees and 0.02 percent slippage. Lower the fee if you post maker orders.
This matters more than most traders expect. Cost per trade is roughly twice the round trip percentage divided by the stop distance. On a daily chart with a wide stop this rounds to almost nothing. On a 15 minute chart with a tight ATR it can exceed a tenth of an R on every single trade, which is enough to turn a system with a respectable win rate into a losing one.
READING THE LABEL
The status label reports the live trade state and the closed trade record. Net R and average R per trade are the headline numbers. Gross R and cost drag are shown alongside them deliberately. If cost drag is consuming a large fraction of gross R, the honest conclusion is that the configuration trades too frequently for the size of its edge, and the fix is a stricter entry filter rather than a cleverer exit.
Best and worst trade, win rate, and the outcome of the most recent trade are also shown. Trend following configurations typically produce a win rate below fifty percent while remaining profitable, because the winners are much larger than the losers. Judge the system on average R, not on win rate.
ALERTS
Five alert conditions are available. Long signal, short signal, either signal, stop or trail hit, and trail armed.
THE CONFIGURATION I USE
1 Hour Swing preset with signal mode set to Pullback, and the reversal option left off so that an opposite signal does not close and flip an open position. Trades finish on their own stop or trail, and the next signal is only taken once flat. This produces a lower trade count with cleaner entries and lets the trail do the work of deciding when a move is over.
LIMITATIONS WORTH KNOWING
Signals evaluate on bar close. Stop resolution uses the level carried in from the previous bar before the trail updates on the current bar, which avoids look ahead but means the trail lags by one bar. When a single bar's range covers both the stop and a hard target, the result is scored as a stop, because OHLC data cannot reveal which level was reached first. The statistics are a study of signal quality, not a full backtest, and they assume constant risk per trade with no position sizing or compounding.
This indicator is a tool for analysis and is not financial advice. Test any configuration on your own market and timeframe before risking capital. Indicator
Macrodoser Moving Average CloudsMacrodoser MA Clouds is a configurable trend-visualization indicator that plots five independent moving-average clouds—ten moving averages in total—directly on the price chart.
While moving-average clouds are a familiar concept, this implementation is designed to provide a more complete and flexible workspace in a single indicator. Its distinguishing feature is the combination of five separately configurable clouds, multiple moving-average types, optional direction-colored MA lines, customizable visuals, and deliberate cloud layering.
HOW IT WORKS
Each cloud consists of a short moving average and a long moving average calculated from the same selected price source.
• When the short MA is greater than or equal to the long MA, the cloud uses its configured bullish color.
• When the short MA is below the long MA, the cloud uses its configured bearish color.
The optional MA lines have their own directional coloring. Each line uses its bullish color while rising and its bearish color while falling. This means the line colors represent the slope of each individual average, while the cloud color represents the relationship between the short and long averages.
MOVING-AVERAGE OPTIONS
Each cloud can independently use one of five calculation methods:
• EMA — Exponential Moving Average
• SMA — Simple Moving Average
• HMA — Hull Moving Average
• WMA — Weighted Moving Average
• RMA — Running Moving Average
This makes it possible to build an all-EMA ribbon, use a different MA type for each cloud, or create a custom combination for a particular market or trading style.
DEFAULT CLOUDS
The default configuration uses the closing price as the source and EMA calculations with the following short/long lengths:
• Cloud 1: 5 / 13
• Cloud 2: 9 / 13
• Cloud 3: 21 / 50
• Cloud 4: 100 / 200
• Cloud 5: 400 / 800
These defaults provide several views of market structure, ranging from short-term momentum to much longer-term trend context. They are starting points only and can be changed to suit the instrument and timeframe being analyzed.
CUSTOMIZATION
Every cloud includes independent controls for:
• Visibility
• Short and long MA lengths
• Price source
• Moving-average type
• Plot offset
• MA-line visibility
• Rising and falling colors for each MA line
• Bullish and bearish cloud colors
• Color transparency
The MA lines can be hidden for a cleaner cloud-only chart or displayed when the exact averages and their individual directions are useful.
PURPOSEFUL CLOUD LAYERING
The clouds use a deliberate drawing order. Cloud 5 is drawn first at the bottom of the visual stack, followed by Clouds 4 through 1. Cloud 1 is therefore the top layer.
When using the clouds from faster to slower, place the shortest-term pair in Cloud 1 and continue toward the longest-term pair in Cloud 5. This keeps faster clouds visible above slower clouds and produces more intuitive blending when transparent colors overlap.
A different ordering can be used intentionally, but reversing this structure may allow a longer-term cloud to cover shorter-term information.
WAYS TO USE IT
The indicator can help visualize:
• Short-, medium-, and long-term trend structure
• Bullish or bearish alignment across several MA pairs
• Changes in momentum as individual averages turn
• Moving-average crossovers and cloud transitions
• Compression, expansion, and overlap between trend horizons
• Areas where different trend horizons agree or conflict
For example, several bullish clouds stacked above their respective longer averages can indicate broad trend alignment. Mixed cloud states can highlight a transition or disagreement between short- and long-term structure.
IMPORTANT LIMITATIONS
Moving averages are lagging calculations derived from historical price data. They do not predict future price movement, and cloud transitions can produce false or rapidly changing indications in sideways or volatile markets.
The current, unfinished chart bar can change as new price data arrives. Plot offsets move the display forward by the selected number of bars for visual purposes; they do not provide future information or change the underlying calculations.
Macrodoser MA Clouds does not generate trade entries, exits, or performance claims. It is intended as a visual analysis tool and should be used with appropriate confirmation and risk management. Indicator
Golden Cross Engine [Quantum Algo]Golden Cross Engine
====================================================
🔶 OVERVIEW
Golden Cross Engine is a complete golden cross and death cross indicator that goes far beyond marking the moving average crossover: it counts down to the next cross before it happens, grades every cross by quality, measures what golden and death crosses have actually done on the current symbol with honest statistics, and lets every cross marker settle into its real outcome so the chart itself shows which crosses worked and which failed.
The golden cross — the fast moving average crossing above the slow, classically the 50 over the 200 — is one of the most watched events in all of trading, and the death cross is its bearish mirror. Every major cross makes financial headlines. This engine turns that famous event from a headline into a measurable, projectable, and auditable object on your chart.
🔶 WHAT ARE THE GOLDEN CROSS AND DEATH CROSS?
A golden cross occurs when a faster moving average (traditionally the 50 period) closes above a slower one (traditionally the 200 period), signaling that intermediate momentum has overtaken the long-term trend — historically read as the start of a bullish regime. A death cross is the opposite: the fast average crossing below the slow, read as the start of a bearish regime. Because both averages move slowly, the cross itself is a lagging event — which is exactly why this engine adds a convergence countdown that shows the cross forming before it prints.
🔶 WHY THIS SCRIPT IS ORIGINAL
1. The convergence countdown. The engine measures the current slope of both averages and projects their geometry forward, drawing the two converging paths and marking where and when they would meet: "Golden Cross ≈ 9 bars" with the projected price level. It is a projection at current slopes — clearly labeled as such, never a forecast — and it makes the most-watched lagging signal in trading visible in advance. An approach alert fires when the countdown first enters your chosen lead window.
2. Markers that settle into their outcome. Every cross prints in neutral gold, then resolves twenty bars later: the bullish or bearish color if the cross delivered, faded gray if it failed. The chart becomes its own audit trail — scroll back and see the honest history of every cross on the symbol.
3. Per-symbol cross statistics. Using shrinkage-adjusted win rates and Wilson confidence bounds, the engine reports how often golden and death crosses were favorable on this exact symbol and timeframe at five, twenty, and sixty bars, with sample counts and average moves — on every marker's tooltip and in the dashboard. It answers "does the golden cross actually work here" with data instead of folklore.
4. Cross quality grading. Every cross is graded A, B, or C from three observable conditions: elevated volume at the cross, slope steepness of the fast average, and momentum confirmation of price relative to it. Grade A crosses are the full-confluence events.
5. A living regime fill. The zone between the averages breathes: the bullish or bearish tint intensifies as the gap widens and pales as a cross approaches, so regime strength and regime fatigue are visible at a glance. Cross bars flash once.
6. Multi-timeframe cross state. The dashboard shows whether the fast average is above or below the slow on the fifteen-minute, one-hour, four-hour, daily, and weekly timeframes simultaneously — full-stack regime alignment in two compact rows.
🔶 HOW IT WORKS
Averages: Selectable simple or exponential averages at configurable lengths, defaulting to the classic 50 and 200.
Countdown: The engine computes each average's recent slope and solves the convergence geometry. When the averages are approaching within the horizon, it draws both projected paths, the meeting diamond with the bar count, and the projected level. When they are separating, the dashboard reads Diverging.
Statistics: Each confirmed cross records what price actually did five, twenty, and sixty bars later, in the cross's direction, into capped first-in-first-out databases. Win rates are pulled toward fifty percent by pseudo-samples so a thin history cannot display fake confidence, and each rate carries a Wilson lower bound. Crosses are rare events by nature, so sample counts are honest and often small — markers read "collecting history" until the minimum is met.
Outcome settlement: Each marker stores its cross price; twenty bars later it recolors by the realized directional outcome and joins the capped history.
Grading: Volume z-score, normalized slope steepness, and price-side confirmation combine into the A, B, C grade shown on the marker tooltip and dashboard.
Non-repainting: Crosses, grades, and statistics are evaluated on closed bars. The countdown updates on the live bar by design — it is a live projection, and it is labeled as one.
🔶 HOW TO USE IT
1. The natural home is the daily chart of major symbols — indices, large-capitalization stocks, cryptocurrency — where the 50 and 200 cross is the famous event. Intraday charts work identically with proportionally more crosses and deeper samples.
2. Watch the countdown as regime alarm: a shrinking bar count with a steepening fast average means the regime change is forming in front of you.
3. Read the settled history before trusting a fresh cross: a chart full of gray markers is telling you crossovers chop on this symbol; a chart of colored ones is telling you they trend.
4. Use the grade as confluence: an A-grade cross with volume, steep slope, and price confirmation is a different event from a flat, quiet drift-through.
5. Check the timeframe rows: a golden cross on your chart while the daily and weekly already sit bullish is alignment; against them, it is a counter-trend event.
6. The statistics rows are context, not commands — favorable rates describe this chart's history, never the next cross.
🔶 SETTINGS
- Average type and both lengths.
- Countdown: projection toggle, horizon, and approach alert lead.
- Statistics: sample cap, minimum samples to grade, shrinkage strength, Wilson z-score, markers to keep.
- Visuals: all colors, gradient fill toggle, cross-bar flash toggle.
- Themeable dashboard: position, four text sizes, title band, background, frame, grid, and three text colors.
🔶 ALERTS
- Golden Cross / Death Cross — the crossover confirmed at bar close.
- Golden Cross Approaching / Death Cross Approaching — the countdown first entered the alert lead window at current slopes.
- Grade A Cross — a cross fired with full quality confluence.
🔶 FREQUENTLY ASKED QUESTIONS
Does the indicator repaint? No. Crosses, grades, statistics, and marker settlement are evaluated on closed bars. The countdown is a live-bar projection and is explicitly presented as one.
Is the countdown a prediction? No. It is where the averages meet if both keep their current slopes. Slopes change; the countdown updates with them. Its value is showing the event forming, not promising the date.
Why are the sample counts small? Because genuine crosses are rare — a daily chart may produce only a handful in years of data. The engine shows honest small numbers with confidence bounds instead of inventing large ones, and lower timeframes build deeper samples.
Why did an old cross marker turn gray? It failed: twenty bars after that cross, price had not moved in the cross's direction. Gray markers are the audit trail working.
Which lengths should I use? The classic 50 and 200 define the famous event. Faster pairs produce more crosses and richer statistics at the cost of more noise.
🔶 CREDITS
The golden cross and death cross are classical moving-average crossover concepts in the public domain of technical analysis, watched across generations of market participants. The Wilson score interval is by Edwin B. Wilson (1927), and shrinkage estimation is standard public statistics. This script gratefully acknowledges that shared lineage. The convergence countdown and projection geometry, the outcome-settling markers, the per-symbol statistical grading, the living regime fill, and all code in this script are original work — no third-party or open-source script code was reused.
🔶 LIMITATIONS
Moving average crossovers are lagging by construction, and the countdown inherits the assumption of stable slopes. Cross samples are naturally small on higher timeframes; statistics mature with history and faster settings. Volume grading is less meaningful on symbols with unreliable volume reporting. Multi-timeframe rows describe state, not signals. No indicator replaces independent analysis.
🔶 DISCLAIMER
This script is provided strictly for educational and informational purposes. It is not financial advice, an investment recommendation, or a solicitation to buy or sell any financial instrument. Past behavior of any cross, projection, or statistic does not guarantee future results. Trading involves substantial risk. Always do your own research and manage risk independently. Indicator
EMA Ribbon Trend Filter [StrixEDGE]EMA Ribbon Trend Filter is a multi-layered trend analysis system built around a triple EMA ribbon (8/21/55) enhanced with squeeze detection, a composite momentum score, multi-timeframe confluence, and dynamic slope-adaptive coloring.
This is not another moving average overlay. It is a full trend diagnostics dashboard designed to answer five questions at a glance: what is the trend, how strong is it, how long has it been running, is the ribbon compressing toward a breakout, and do higher timeframes agree.
🔹 CORE CONCEPT
Three exponential moving averages — fast (8), mid (21), and slow (55) — form a visual ribbon on the chart. When the EMAs stack in order (fast > mid > slow), the trend is bullish. When they invert, the trend is bearish. Anything else is a transitional state labeled neutral.
The ribbon is more than directional. The distance between the fastest and slowest EMA (the "spread") measures trend strength as a percentage, and the rate at which the ribbon expands or contracts reveals momentum shifts before price confirms them.
🔹 WHAT MAKES THIS DIFFERENT
Most EMA ribbons stop at direction and color. This indicator adds four analytical layers that standard ribbons lack:
▸ Ribbon Squeeze Detection
The indicator continuously measures ribbon width against its own moving average. When the three EMAs converge below a configurable threshold (default: 30% of average width), the ribbon turns yellow and the dashboard flags an active squeeze. Compression precedes expansion — a squeeze ending often marks the start of a directional move. Dedicated markers appear on the chart when a squeeze releases into a bullish or bearish trend.
▸ Composite Momentum Score (0–100)
A single number synthesizing four components, each weighted equally at 25 points:
— EMA alignment: full bullish or bearish stack scores 25, mixed scores 0
— Slope agreement: all three EMAs rising or all falling scores 25, partial agreement scores 12
— Spread strength: scaled between 0–25 based on where the current spread falls relative to the user-defined weak and strong thresholds
— Price position: price above the ribbon in a bullish trend (or below in bearish) scores 25, inside the ribbon scores 10, on the wrong side scores 0
The score is color-coded: cyan (80+), teal (60–79), orange (40–59), red (below 40).
▸ Dynamic Slope-Adaptive Colors
When enabled, each EMA line independently changes color based on its own slope — rising EMAs render green, falling EMAs render red. This provides an early visual warning when individual EMAs begin to flatten or turn, even while the overall stack remains intact. A bullish stack where the slow EMA has turned red is a qualitatively different signal than one where all three are green.
▸ Multi-Timeframe Dashboard
A built-in table displays trend state, spread, and grade across five timeframes simultaneously: the current chart timeframe plus 15-minute, 1-hour, 4-hour, and daily. The active chart timeframe is marked with ► in the MTF rows if it matches one of the fixed timeframes. A confluence row at the bottom counts how many timeframes are bullish versus bearish and outputs a directional bias: Strong Bull (4–5 aligned), Bull Lean (3), Neutral (mixed), Bear Lean (3 bearish), or Strong Bear (4–5 bearish).
🔹 CROSSOVER SIGNAL HIERARCHY
Not all EMA crossovers carry equal weight. The indicator differentiates three tiers with distinct marker sizes and shapes:
▸ Fast × Mid (tiny triangles) — Early signal. The 8 EMA crossing the 21 EMA indicates short-term momentum shift. Frequent, noisy, best used as an alert rather than a trigger.
▸ Fast × Slow (standard triangles) — Confirmation signal. The 8 EMA crossing the 55 EMA has more significance and filters out minor pullbacks.
▸ Mid × Slow (diamonds) — Trend shift signal. The 21 EMA crossing the 55 EMA typically marks a genuine change in trend direction. This is the least frequent and most reliable crossover in the set.
All crossover markers can be toggled off independently.
🔹 DASHBOARD COMPONENTS
The top-right dashboard (position and size adjustable) contains:
Row 1 — TREND: Current trend state (▲ Bullish / ▼ Bearish / ◆ Neutral) with bar count showing how long the trend has been active.
Row 2 — ZONE: Where price sits relative to the ribbon (Above / Inside / Below) alongside the momentum score out of 100.
Row 3 — SQUEEZE: Active squeeze status with a visual strength bar (██████░░░░) showing current spread intensity relative to its recent range.
Rows 4–9 — MTF OVERVIEW: Trend, spread, and grade for the current chart, 15m, 1H, 4H, and 1D timeframes.
Row 10 — BIAS: Multi-timeframe confluence verdict with bull/bear count.
🔹 SETTINGS
EMA Settings
▸ Fast / Mid / Slow EMA Period — Default 8/21/55. Periods must be in ascending order.
▸ Source — Close, Open, High, Low, HL2, HLC3, or OHLC4.
Overlay Settings
▸ Background Transparency — Controls the intensity of the trend-colored chart background (0–99).
▸ Crossover Signals — Toggle the three-tier crossover markers.
▸ Ribbon Fill — Toggle the colored fill between EMA lines. Fill turns yellow during active squeeze.
▸ Dynamic EMA Colors — Toggle slope-based EMA coloring (green = rising, red = falling).
▸ Bar Coloring — Optional candle coloring by trend state and price position. Off by default.
▸ Squeeze Detection — Toggle squeeze markers and dashboard squeeze status.
Dashboard
▸ Table Size — Tiny, Small, Normal, or Large.
▸ Table Position — 8 positions (corners, centers, sides).
Thresholds
▸ Weak/Strong spread thresholds (%) — Define what constitutes a weak, moderate, or strong trend spread. These should be adjusted per asset class (e.g., lower for forex, higher for crypto).
▸ Squeeze Lookback — Number of bars used to calculate the average ribbon width for squeeze detection.
▸ Squeeze Ratio — The compression threshold. A ribbon narrower than this ratio × average width triggers a squeeze flag.
🔹 ALERTS
Nine configurable alert conditions:
▸ Bullish / Bearish EMA Crossover (any tier)
▸ Mid × Slow Bullish / Bearish Shift
▸ Bullish / Bearish Stack Formed
▸ Squeeze Detected (compression begins)
▸ Squeeze Released (expansion starts)
▸ High Momentum (score crosses above 80)
🔹 SUGGESTED USE
This indicator works as a trend filter, not a standalone entry signal. Use it to:
▸ Confirm directional bias across timeframes before entering trades
▸ Identify compression phases where breakouts are likely
▸ Gauge trend quality and exhaustion via the momentum score and bar duration
▸ Filter crossover signals — a Fast × Mid cross during an active squeeze with MTF confluence is a higher-probability setup than the same cross in isolation
Pairs well with oscillators (RSI, Stochastic), volume-based indicators, or support/resistance tools for entry timing. Indicator
Apex Fusion AI| Smart Trend EngineApex Fusion AI | Smart Trend Engine
Apex Fusion AI combines multiple high-probability trading concepts into a single confluence engine designed to filter low-quality setups and highlight only the strongest opportunities.
Instead of relying on a single indicator, it analyzes trend, momentum, market structure, volatility, and volume confirmation simultaneously.
Features
• EMA Trend Filter
• SuperTrend Confirmation
• MACD Momentum Analysis
• Momentum Strength Filter
• Fractal Market Structure (BOS)
• Fibonacci Retracement Confluence
• ATR Dynamic Risk Management
• Smart Volume Confirmation
• Institutional POC Approximation
• Built-in A+ Quality Scoring System
Each signal is evaluated through a weighted scoring model, allowing traders to focus only on high-confluence setups while filtering out weaker market conditions.
Designed for swing trading, day trading, and scalping across Forex, Crypto, Indices, Commodities, and Gold.
Works on every timeframe, with particularly strong performance on the 1H chart where trend, momentum, and structure align more consistently.
This indicator is intended to assist decision-making and should be used alongside sound risk management and proper market analysis.
— Tomukas Trading Strategy
MACD Momentum Entry Engine [trade_w_samet]🎯 MACD Momentum Entry Engine
MACD Momentum Entry Engine is a structured momentum-analysis and visual trade-model indicator designed to help traders study confirmed MACD events, momentum quality, directional persistence, market regime, trend alignment, candle confirmation, and multi-target risk references directly from one coordinated workflow.
The script is built around one central idea:
A MACD event should not automatically become an entry signal.
Instead of treating every MACD crossover as equally meaningful, the engine first identifies the type of momentum event, then evaluates its strength, expansion, slope, acceleration, market environment, candle quality, directional persistence, and optional trend alignment before a permanent LONG or SHORT setup is accepted.
The indicator includes:
• Configurable MACD fast, slow, and signal lengths
• EMA, SMA, RMA, and WMA calculation options
• Early Trigger and Momentum Confirmed entry timing
• Reversal, Continuation, Zero-Line Reclaim, and Momentum Expansion setups
• A transparent 0–100 Momentum Quality Score
• Alignment, histogram strength, expansion, slope, and acceleration scoring
• Loose, Balanced, Strict, and Off quality modes
• A separate 0–100 Anti-Chop Market Regime Score
• ADX, price efficiency, EMA separation, and volatility-expansion analysis
• A separate 0–100 Entry Qualification Score
• Candle body, close location, MACD separation, persistence, impulse, and trigger-context analysis
• A final composite setup score
• A+, A, B, and C internal setup grades
• Optional chart EMA, confirmed higher-timeframe EMA, and combined trend bias
• Confirmed higher-timeframe calculations
• Zero-line directional filtering
• ATR-normalized absolute histogram-strength filtering
• Internal signal cooldown and same-bar re-entry protection
• One-active-trade-at-a-time visual management
• ATR-based and XAUUSD fixed-pip risk models
• Three visual take-profit levels
• Stop First and Targets First same-bar assumptions
• Equal-third internal trade-model accounting
• Active Entry, TP1, TP2, TP3, and SL lines
• Active reward and risk boxes on the main chart
• TP3-only historical trade-model preservation
• Separate SL, Closed TP1, Closed TP2, and TP3 result labels
• Adjustable LONG, SHORT, and result-label sizes
• MACD histogram, line, signal line, momentum background, and anti-chop background
• Neon LONG and SHORT dots directly on the MACD line
• A compact main-chart dashboard
• XAUUSD symbol verification and mismatch warning
• Static PulseWire alert conditions
• Detailed dynamic alert() messages
• Data Window diagnostics
• Confirmed-close permanent signals
The purpose of this script is to provide a structured way to study when a MACD event is supported by broader momentum and market context.
It is not financial advice.
It is not an automated trading system.
It does not guarantee profitable trades.
It does not execute broker orders.
It does not replace personal analysis, position sizing, or risk management.
━━━━━━━━━━━━━━━━━━━━━━
📌 OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━
At a high level, MACD Momentum Entry Engine does the following:
• Calculates a configurable MACD using the selected average types.
• Separates the visual histogram scale from the calculation scale.
• Detects confirmed MACD crossovers and zero-line events.
• Identifies Reversal, Continuation, Zero-Line Reclaim, and Expansion setup types.
• Optionally accepts the event immediately through Early Trigger mode.
• Optionally arms the setup and waits for renewed momentum through Momentum Confirmed mode.
• Measures momentum alignment, histogram strength, histogram expansion, MACD slope, and acceleration.
• Produces separate bullish and bearish 0–100 Momentum Quality Scores.
• Measures market regime using ADX, directional efficiency, EMA separation, and volatility expansion.
• Produces a separate 0–100 Market Regime Score.
• Evaluates candle direction, body quality, close location, MACD separation, persistence, and price impulse.
• Produces separate bullish and bearish Entry Qualification Scores.
• Combines momentum, regime, and entry quality into a final composite score.
• Assigns an internal A+, A, B, or C grade.
• Applies optional chart EMA and confirmed higher-timeframe EMA bias.
• Applies zero-line, absolute-strength, cooldown, and trade-slot controls.
• Confirms permanent LONG and SHORT signals only after candle close.
• Opens one visual trade model from the confirmed signal-bar close.
• Calculates Entry, Stop Loss, TP1, TP2, and TP3.
• Tracks targets and stop events from the next candle onward.
• Applies the selected same-bar processing assumption.
• Preserves completed TP3 models when historical display is enabled.
• Removes trade drawings after SL, Closed TP1, or Closed TP2 outcomes.
• Converts the original entry label into the final result for non-TP3 outcomes.
• Adds a separate electric-purple FULL TARGET label for TP3 outcomes.
• Displays Momentum, Trend, Regime, Trade, Last Result, and Protection states in the bottom-right dashboard.
• Provides static and dynamic alert options.
• Exposes diagnostic values through PulseWire’s Data Window.
The indicator does not use machine-learning prediction.
Its scores are not probabilities.
Its labels do not promise future direction.
The script is a rule-based educational momentum framework that explains how a raw MACD event becomes an accepted or rejected setup.
━━━━━━━━━━━━━━━━━━━━━━
🧠 CORE IDEA
━━━━━━━━━━━━━━━━━━━━━━
The core idea behind MACD Momentum Entry Engine is that a crossover alone contains limited context.
A basic crossover only confirms that one MACD line has moved through another.
It does not automatically explain:
• whether the histogram is expanding
• whether momentum is accelerating
• whether the move is occurring in a directional or choppy market
• whether the signal candle supports the direction
• whether MACD separation is meaningful relative to recent behavior
• whether momentum has persisted
• whether price is aligned with an optional trend filter
• whether a recent signal already occurred
• whether a visual trade model is already active
The engine therefore uses a staged sequence:
MACD event
→ setup classification
→ momentum-quality scoring
→ optional trend-bias validation
→ anti-chop regime scoring
→ entry qualification
→ additional signal filters
→ confirmed signal
→ visual trade model
→ TP / SL lifecycle
→ result handling
For bullish conditions, the script studies upward MACD transitions, positive histogram alignment, renewed expansion, positive slope, positive acceleration, bullish candle behavior, and directional persistence.
For bearish conditions, the same process is mirrored.
The purpose is not to find the largest possible number of signals.
The purpose is to make the acceptance process visible, configurable, and understandable.
━━━━━━━━━━━━━━━━━━━━━━
🧩 WHY THIS SCRIPT IS NOT A SIMPLE BUY/SELL INDICATOR
━━━━━━━━━━━━━━━━━━━━━━
MACD Momentum Entry Engine is not designed to be used as a blind buy/sell system.
A raw MACD event must move through multiple stages:
A crossover or momentum event appears
→ the event is classified
→ the momentum-quality layer is evaluated
→ the trend-bias layer is evaluated
→ the anti-chop layer is evaluated
→ the candle and entry-quality layer is evaluated
→ zero-line and absolute-strength filters are checked
→ cooldown and active-trade restrictions are checked
→ the setup must remain valid at candle close
→ a permanent LONG or SHORT setup is printed
→ Entry, SL, TP1, TP2, and TP3 are projected
→ the trade model is monitored from the following candle
→ the model closes at TP3 or Stop
→ the final chart result is preserved or cleaned
Each module serves a different purpose.
The MACD core defines the momentum relationship.
The setup engine identifies what kind of event occurred.
The momentum-quality engine measures the internal strength of that event.
The anti-chop engine measures whether the broader environment is directional enough for the selected mode.
The entry-qualification engine evaluates the signal candle and immediate price response.
The trend-bias engine optionally restricts direction.
The trade engine standardizes the visual risk framework.
The dashboard explains the current engine state.
This makes the script a coordinated momentum-analysis workflow rather than a basic crossover marker.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ HOW THE SCRIPT WORKS
━━━━━━━━━━━━━━━━━━━━━━
The script operates through connected calculation stages.
First, it calculates every supported moving-average type on every candle.
The selected average type is then used for the fast MACD average, slow MACD average, and signal average.
The MACD line is the difference between the selected fast and slow averages.
The histogram is the difference between the MACD line and the signal line.
fastAverage = f_selectMa(macdMaType, fastEma, fastSma, fastRma, fastWma)
slowAverage = f_selectMa(macdMaType, slowEma, slowSma, slowRma, slowWma)
macdLine = fastAverage - slowAverage
signalLine = f_selectMa(signalMaType, signalEma, signalSma, signalRma, signalWma)
histogram = macdLine - signalLine
The histogram visual multiplier changes only the displayed column length.
It does not change:
• the MACD line
• the signal line
• the histogram used by calculations
• quality scores
• setup detection
• trade results
After the MACD core is calculated, the engine measures:
• absolute histogram strength
• one-bar histogram expansion
• MACD slope
• momentum acceleration
• adaptive baselines for each measurement
The setup engine then checks the enabled event types.
The quality, trend, regime, qualification, and additional-filter stages determine whether the setup is eligible.
A final permanent signal is accepted only after the candle closes and every enabled condition remains valid.
━━━━━━━━━━━━━━━━━━━━━━
🟢 BULLISH MACD MOMENTUM LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A bullish setup begins with one of four enabled event types.
Bullish Reversal
A bullish MACD crossover occurs while the MACD line remains below zero.
This represents a momentum turn from the negative side of the zero line.
Bullish Continuation
A bullish MACD crossover occurs while the MACD line is at or above zero.
This represents renewed bullish alignment on the positive side.
Bullish Zero-Line Reclaim
The MACD line crosses above zero while:
• MACD is above the signal line
• the histogram is positive
• the bar is confirmed
Bullish Momentum Expansion
The histogram resumes positive expansion after a short contraction while:
• MACD remains above the signal line
• MACD slope is positive
• no new crossover is being used on the same bar
• no new zero-line cross is being used on the same bar
The event must then pass the active momentum-quality requirement.
When enabled, it must also pass:
• chart EMA bias
• confirmed higher-timeframe EMA bias
• EMA slope confirmation
• ATR distance from the trend EMA
• anti-chop regime requirement
• entry qualification
• bullish candle direction
• minimum MACD separation
• momentum persistence
• zero-line direction
• absolute histogram strength
• cooldown
• active-trade availability
The final signal uses confirmed-bar logic.
bullishSignal =
barstate.isconfirmed and
bullishEntryCandidate and
bullishZeroLinePass and
absoluteStrengthPass and
bullishQualityPass and
bullishTrendPass and
antiChopPass and
bullishQualificationPass and
bullishCandlePass and
separationPass and
bullishPersistencePass and
cooldownPass and
tradeSlotAvailable
When every active rule passes, the script can display:
• a neon green dot on the MACD line
• a LONG label on the main chart
• setup type, grade, and score information
• a visual Entry, SL, TP1, TP2, and TP3 model
This confirms that the configured bullish momentum conditions were valid at candle close.
It does not mean price must continue upward.
━━━━━━━━━━━━━━━━━━━━━━
🔴 BEARISH MACD MOMENTUM LOGIC
━━━━━━━━━━━━━━━━━━━━━━
A bearish setup mirrors the bullish process.
Bearish Reversal
A bearish MACD crossover occurs while the MACD line remains above zero.
This represents a momentum turn from the positive side of the zero line.
Bearish Continuation
A bearish MACD crossover occurs while the MACD line is at or below zero.
This represents renewed bearish alignment on the negative side.
Bearish Zero-Line Reclaim
The MACD line crosses below zero while:
• MACD is below the signal line
• the histogram is negative
• the bar is confirmed
Bearish Momentum Expansion
The histogram resumes negative expansion after a short contraction while:
• MACD remains below the signal line
• MACD slope is negative
• no new bearish crossover is being used on the same bar
• no new bearish zero-line cross is being used on the same bar
The setup must then pass the same quality, trend, regime, candle, separation, persistence, strength, cooldown, and trade-slot controls.
A permanent SHORT signal appears only when all active conditions remain valid at candle close.
The script can then display:
• a neon red dot on the MACD line
• a SHORT label on the main chart
• setup type, grade, and score information
• Entry, SL, TP1, TP2, and TP3 references
This confirms that the configured bearish momentum conditions were valid at candle close.
It does not guarantee continued downside movement.
━━━━━━━━━━━━━━━━━━━━━━
💎 MACD MOMENTUM QUALITY FILTER SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
The script includes a separate bullish and bearish Momentum Quality Score.
The quality layer evaluates five components.
Alignment — maximum 20 points
Bullish alignment requires:
• MACD above the signal line
• positive histogram
Bearish alignment requires:
• MACD below the signal line
• negative histogram
Histogram Strength — maximum 25 points
The absolute histogram value is compared with an adaptive EMA baseline.
This measures whether current separation is meaningful relative to recent MACD behavior.
Histogram Expansion — maximum 20 points
The engine measures the one-bar change in absolute histogram strength.
Points are awarded only when the histogram is expanding in the setup direction.
MACD Slope — maximum 20 points
Bullish setups require positive slope for this component.
Bearish setups require negative slope.
The slope magnitude is compared with its own adaptive baseline.
Momentum Acceleration — maximum 15 points
Acceleration measures the change in MACD slope.
Positive acceleration supports bullish scoring.
Negative acceleration supports bearish scoring.
bullishQualityScore = f_clamp(
bullishAlignmentScore +
bullishHistogramStrengthScore +
bullishExpansionScore +
bullishSlopeScore +
bullishAccelerationScore,
0.0,
100.0
The available quality modes are:
Off
Removes the minimum Momentum Quality Score restriction.
Loose
Requires a minimum score of 45.
Balanced
Requires a minimum score of 60.
Strict
Requires a minimum score of 75 and is the default.
The score is not a win rate.
It is not a probability.
It measures how closely the current MACD event matches the engine’s momentum-strength framework.
━━━━━━━━━━━━━━━━━━━━━━
📏 VOLATILITY / ATR NORMALIZATION FILTER
━━━━━━━━━━━━━━━━━━━━━━
The indicator uses ATR normalization to compare certain values across changing volatility conditions.
The Absolute Strength Filter calculates:
Absolute Histogram Strength = |Histogram| / ATR × 100.
This value is used as an additional minimum-strength condition.
The default settings are:
• Normalization ATR Length: 14
• Minimum Absolute Strength: 1.0
• Use Absolute Strength Filter: enabled
ATR normalization helps reduce dependence on the raw numerical scale of a market.
For example, a raw MACD histogram value cannot be compared directly across instruments with very different prices and volatility.
Normalization places the histogram in relation to the instrument’s recent ATR.
The same ATR framework is also used by:
• optional price-to-EMA trend buffers
• EMA-separation regime measurement
• price-impulse scoring
• ATR-based trade management
ATR normalization does not make one configuration universal.
Symbols, sessions, exchanges, and data feeds can still behave differently.
━━━━━━━━━━━━━━━━━━━━━━
🕯️ DISPLACEMENT QUALITY FILTER
━━━━━━━━━━━━━━━━━━━━━━
The entry-qualification engine evaluates whether the signal candle shows enough directional response.
The Candle component contributes up to 25 points.
It is divided into:
Directional Body — maximum 12.5 points
For bullish setups, the engine measures the positive candle body relative to the full candle range.
For bearish setups, it measures the negative body.
Close Location — maximum 12.5 points
Bullish setups receive more points when the close is nearer the candle high.
Bearish setups receive more points when the close is nearer the candle low.
Price Impulse contributes up to 15 additional points.
The engine compares the one-bar directional price movement with ATR.
A bullish price impulse measures positive close-to-close displacement.
A bearish price impulse measures negative close-to-close displacement.
This layer does not predict the next candle.
It measures whether the completed signal candle supports the direction of the MACD event.
━━━━━━━━━━━━━━━━━━━━━━
📊 REACTION STRENGTH FILTER
━━━━━━━━━━━━━━━━━━━━━━
The engine includes a separate Entry Qualification Score.
Its components are:
Candle Quality — maximum 25 points
Combines directional body and close location.
MACD Separation — maximum 25 points
Measures current histogram separation relative to its adaptive baseline.
Momentum Persistence — maximum 20 points
Measures how long directional MACD and histogram alignment has remained active.
Price Impulse — maximum 15 points
Measures directional close-to-close movement relative to ATR.
Trigger Context — maximum 15 points
Confirms that an eligible setup event is currently active.
The total is limited to 0–100.
Available modes are:
Off
Removes the minimum Entry Qualification Score restriction.
Loose
Requires a minimum score of 45.
Balanced
Requires a minimum score of 60.
Strict
Requires a minimum score of 75 and is the default.
The final signal also uses internal candle-direction, separation, and persistence requirements.
These internal parameters remain active in the background to keep the public settings menu cleaner.
The Entry Qualification Score is not a verified accuracy figure.
It describes the quality of the completed entry context according to the script’s rules.
━━━━━━━━━━━━━━━━━━━━━━
🧼 CONFIRMED SIGNAL FILTER
━━━━━━━━━━━━━━━━━━━━━━
Permanent LONG and SHORT signals wait for candle close.
The engine uses confirmed-bar checks on:
• MACD crossovers
• zero-line crossings
• expansion triggers
• momentum confirmation
• final LONG and SHORT conditions
The higher-timeframe trend layer also uses previous completed higher-timeframe values.
htfConfirmedClose = request.security(
syminfo.tickerid,
higherTimeframe,
close ,
gaps = barmerge.gaps_off,
lookahead = barmerge.lookahead_on
)
htfConfirmedEma = request.security(
syminfo.tickerid,
higherTimeframe,
ta.ema(close, trendLength) ,
gaps = barmerge.gaps_off,
lookahead = barmerge.lookahead_on
)
This approach prevents an unfinished higher-timeframe candle from becoming the permanent trend reference.
Entry Timing provides two workflows.
Early Trigger
Uses the confirmed setup event directly.
Momentum Confirmed
Arms the setup and waits for a later confirmed candle with:
• continued MACD alignment
• directional histogram
• renewed histogram expansion
• directional MACD slope
The confirmation opportunity is temporary.
If renewed momentum does not appear inside the internal window, the armed setup expires.
The script does not plot final signals into earlier candles.
Historical results can still change when:
• settings change
• symbol data changes
• timeframe changes
• the data provider revises history
• the available chart-history range changes
━━━━━━━━━━━━━━━━━━━━━━
🎯 ENTRY MODEL
━━━━━━━━━━━━━━━━━━━━━━
When a final LONG or SHORT setup passes every enabled condition, the trade engine can create a visual trade model.
The Entry reference is the close of the confirmed signal candle.
For a LONG model:
• Stop is below Entry
• TP1 is above Entry
• TP2 is above TP1
• TP3 is above TP2
For a SHORT model:
• Stop is above Entry
• TP1 is below Entry
• TP2 is below TP1
• TP3 is below TP2
tradeEntryPrice := close
tradeStopPrice := tradeEntryPrice - selectedStopDistance
tradeTp1Price := tradeEntryPrice + selectedTp1Distance
tradeTp2Price := tradeEntryPrice + selectedTp2Distance
tradeTp3Price := tradeEntryPrice + selectedTp3Distance
The model begins checking TP and SL from the following candle.
This prevents the signal candle’s earlier high or low from being treated as though it occurred after the close-based entry.
The engine stores:
• direction
• entry bar
• entry price
• stop price
• TP1 price
• TP2 price
• TP3 price
• initial risk
• target R values
• TP1 and TP2 progress
• setup type
• setup grade
• risk model
• original signal label
The displayed model is an educational chart reference.
It is not a broker order.
━━━━━━━━━━━━━━━━━━━━━━
🛑 ATR STOP-LOSS MODEL
━━━━━━━━━━━━━━━━━━━━━━
The indicator includes two risk models.
ATR Based
Stop distance is calculated as:
ATR × ATR Stop Multiplier.
The default settings are:
• ATR Length: 14
• ATR Stop Multiplier: 1.50
• TP1: 0.50R
• TP2: 1.00R
• TP3: 1.50R
The minimum distance is protected by the symbol’s minimum tick.
XAUUSD Fixed Pips
Stop and target distances use:
Selected Pips × XAUUSD Pip Size.
The default settings are:
• Pip Size: 0.01
• Stop Loss: 1000 pips
• TP1: 500 pips
• TP2: 1000 pips
• TP3: 1500 pips
Under the common 0.01 convention, those values correspond to:
• Stop distance: 10.00 price units
• TP1 distance: 5.00 price units
• TP2 distance: 10.00 price units
• TP3 distance: 15.00 price units
Broker conventions can differ.
Users should verify their symbol specification before relying on fixed-pip distances.
The XAUUSD protection system checks the symbol.
The dashboard shows:
• ✅ XAUUSD VERIFIED when XAUUSD Fixed Pips is used on a recognized XAUUSD symbol
• ⚠️ CHECK SYMBOL when the mode is used on another symbol
• 🛡️ ATR MODE when ATR Based is selected
The warning does not block calculations.
It tells the user to verify pip size and target distances.
━━━━━━━━━━━━━━━━━━━━━━
🎯 TAKE-PROFIT RR MODEL
━━━━━━━━━━━━━━━━━━━━━━
The visual model contains three take-profit levels.
ATR Based mode calculates targets from the initial stop distance:
TP1 Distance = Initial Risk × TP1 RR.
TP2 Distance = Initial Risk × TP2 RR.
TP3 Distance = Initial Risk × TP3 RR.
XAUUSD Fixed Pips mode uses independent fixed target distances.
The script enforces the following order:
TP1 < TP2 < TP3.
If a selected value would violate that order, the next target is moved at least one minimum tick beyond the prior target.
The trade model internally treats the position as three equal portions.
Each target represents one-third of the model.
If Stop is reached after TP1 or TP2, the script calculates an internal net-R result from:
• the portions already modeled as closed at reached targets
• the remaining portion or portions modeled at Stop
This internal calculation supports Data Window counters.
It is not broker-verified performance.
It does not account for:
• spread
• commission
• slippage
• latency
• partial-fill differences
• financing
• order rejection
• execution venue behavior
━━━━━━━━━━━━━━━━━━━━━━
📦 ACTIVE TP / SL BOX SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
When a confirmed trade model opens, the script can draw on the main chart:
• Entry line
• TP1 line
• TP2 line
• TP3 line
• Stop Loss line
• TP1 reward box
• TP2 reward box
• TP3 reward box
• SL risk box
• LONG or SHORT label
The Entry line is white.
The TP lines are green and initially dashed.
The SL line is red and solid.
The SL box uses a solid border.
When a target is reached:
• the corresponding box becomes more visible
• the corresponding target line becomes solid
• the target line becomes thicker
• the dynamic target alert can fire
When TP3 is reached:
• the complete model closes
• the original LONG or SHORT label remains
• a separate electric-purple TP3 FULL TARGET label appears
• the trade model can remain historically visible
When the model closes at Stop before TP3:
• all active boxes are deleted
• all active trade lines are deleted
• the original LONG or SHORT label is converted into the final result
• the final result becomes SL, CLOSED TP1, or CLOSED TP2
Only TP3 outcomes can retain completed historical boxes and lines.
This is a chart-cleanliness decision.
It does not imply that other outcomes did not occur.
━━━━━━━━━━━━━━━━━━━━━━
🚦 ONE ACTIVE TRADE AT A TIME
━━━━━━━━━━━━━━━━━━━━━━
The script uses one-active-trade-at-a-time visual management.
When the trade engine is enabled:
• a new trade model cannot open while another model is active
• a new trade cannot open on the same candle that closed the previous model
• the internal setup engine continues calculating
• permanent signals are restricted by trade-slot availability
This prevents overlapping Entry, TP, and SL structures.
It also keeps the trade lifecycle easier to interpret.
When the trade engine is disabled, qualified signals can still be evaluated without opening a visual trade model.
The one-active-model rule is a visual and analytical design choice.
It does not restrict the user’s personal trading activity.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ SAME-CANDLE TP / SL HANDLING
━━━━━━━━━━━━━━━━━━━━━━
Trade monitoring begins after the entry candle.
If a later historical candle touches both Stop and one or more targets, standard OHLC data does not reveal the exact intrabar sequence.
The indicator therefore provides two assumptions.
Stop First
If Stop and a target are both touched on the same candle, Stop is processed first.
This is the default and more conservative assumption.
Targets First
Reached targets are processed before Stop.
If TP3 is reached, the model closes at TP3.
Otherwise, remaining portions can close at Stop.
Neither mode reconstructs tick-level execution.
The indicator does not know:
• whether the high occurred before the low
• the bid/ask path
• actual fill sequence
• spread at the time
• slippage
• queue priority
• partial fills
The selected same-bar rule is a modeling assumption required by the limits of OHLC candles.
━━━━━━━━━━━━━━━━━━━━━━
🏷️ MACD MOMENTUM LABELS
━━━━━━━━━━━━━━━━━━━━━━
The indicator uses separate entry and result labels.
Entry labels display:
🚀 LONG
or:
🔴 SHORT
Entry Label Content provides:
Direction Only
Displays only LONG or SHORT.
Grade
Displays direction and setup grade.
Score + Grade
Displays direction, grade, and rounded composite score.
The default is Score + Grade.
LONG and SHORT label sizes can be adjusted independently.
Both default to Small.
The label tooltip contains:
• setup direction
• setup type
• setup grade
• composite score
• Momentum Quality Score
• Entry Qualification Score
• Market Regime Score
• trend-bias state
Result labels include:
🛑 SL
⚠️ CLOSED TP1
✅ CLOSED TP2
🏆 TP3 HIT
✅ FULL TARGET
SL, Closed TP1, and Closed TP2 transform the original entry label.
TP3 creates a separate result label and preserves the original entry label.
All chart-label text uses bold and italic formatting.
━━━━━━━━━━━━━━━━━━━━━━
📍 MACD DISPLAY MODES
━━━━━━━━━━━━━━━━━━━━━━
The indicator operates in a separate MACD pane while selected trade visuals, entry labels, and the dashboard are forced onto the main price chart.
The MACD pane can display:
MACD Line
A white line representing the difference between the selected fast and slow averages.
Signal Line
A red line representing the selected signal smoothing.
Histogram
Color changes communicate momentum condition:
• stronger green for bullish expansion
• softer green for bullish contraction
• stronger red for bearish expansion
• softer red for bearish contraction
Histogram Visual Length
The default multiplier is 1.60.
This changes visual column length only.
It does not affect calculations.
Neon Signal Dots
Qualified LONG setups produce a neon green glow and center dot on the MACD line.
Qualified SHORT setups produce a neon red glow and center dot.
Momentum Background
The pane background changes according to strong or weak bullish and bearish momentum states.
Anti-Chop Background
A neutral gray background can identify conditions blocked by the Anti-Chop Engine.
Each major visual element can be shown or hidden independently.
━━━━━━━━━━━━━━━━━━━━━━
🧹 SETUP INVALIDATION
━━━━━━━━━━━━━━━━━━━━━━
Not every raw MACD event remains eligible.
A setup can be rejected or expire because:
• its momentum score is below the selected threshold
• trend bias does not permit the direction
• the market regime is below the active Anti-Chop threshold
• the Entry Qualification Score is insufficient
• candle direction does not support the setup
• MACD separation is insufficient
• directional persistence is insufficient
• the zero-line filter blocks the direction
• normalized histogram strength is too low
• the signal cooldown is active
• another visual trade is active
• a trade closed on the current candle
• Momentum Confirmed mode does not receive renewed expansion in time
• an opposite raw setup replaces the armed direction
The internal cooldown is eight bars.
Momentum Confirmed mode uses a temporary internal confirmation window.
These background controls are intentionally not exposed as advanced public inputs.
They remain part of the engine’s consistency rules.
A rejected event is not displayed as a permanent entry signal.
━━━━━━━━━━━━━━━━━━━━━━
📟 DASHBOARD
━━━━━━━━━━━━━━━━━━━━━━
The indicator includes a compact dashboard in the bottom-right corner of the main price chart.
The dashboard displays:
Momentum
Possible states include:
• STRONG LONG
• LONG
• STRONG SHORT
• SHORT
• NEUTRAL
Trend
Possible states include:
• BULLISH
• BEARISH
• NEUTRAL
• OFF
Regime
Possible states include:
• TRENDING
• DEVELOPING
• CHOP
• OFF
Trade
Possible states include:
• WAITING
• LONG ACTIVE
• LONG TP1 REACHED
• LONG TP2 REACHED
• SHORT ACTIVE
• SHORT TP1 REACHED
• SHORT TP2 REACHED
Last
Displays the most recent closed model result:
• SL
• CLOSED TP1
• CLOSED TP2
• TP3
Protection
Displays:
• ATR MODE
• XAUUSD VERIFIED
• CHECK SYMBOL
The dashboard is not PulseWire Strategy Tester.
It does not display audited brokerage results.
Its states are based on the indicator’s own rule-based calculations.
━━━━━━━━━━━━━━━━━━━━━━
🚨 ALERT SYSTEM
━━━━━━━━━━━━━━━━━━━━━━
MACD Momentum Entry Engine includes static PulseWire alert conditions for:
• MACD Momentum LONG
• MACD Momentum SHORT
• TP1
• TP2
• TP3
• Stop Loss
• XAUUSD Mode Warning
The XAUUSD warning condition is limited to a qualified entry bar when Fixed Pips mode is active on a non-XAUUSD symbol.
The script also includes detailed dynamic alert() messages.
Dynamic Entry messages can include:
• direction
• symbol
• timeframe
• setup type
• setup grade
• composite score
• risk model
• Entry
• Stop Loss
• TP1
• TP2
• TP3
• XAUUSD mismatch warning when relevant
Dynamic target messages can include:
• target name
• direction
• symbol
• timeframe
• reached target price
• Entry
• Stop Loss
• TP1
• TP2
• TP3
Dynamic stop messages can include:
• final result
• direction
• symbol
• timeframe
• Entry
• exit price
• Stop Loss
• whether TP1 or TP2 was reached first
Alerts are monitoring tools.
They do not place or manage broker orders.
━━━━━━━━━━━━━━━━━━━━━━
🔔 HOW TO USE ALERTS
━━━━━━━━━━━━━━━━━━━━━━
For static conditions:
1. Add MACD Momentum Entry Engine to the chart.
2. Open PulseWire’s Create Alert window.
3. Select the indicator as the condition.
4. Choose LONG, SHORT, TP1, TP2, TP3, SL, or XAUUSD Mode Warning.
5. Select a frequency appropriate for confirmed-candle monitoring.
6. Test the alert before relying on it.
For detailed dynamic messages:
1. Enable Detailed Dynamic Alerts in the indicator settings.
2. Open PulseWire’s Create Alert window.
3. Select MACD Momentum Entry Engine .
4. Select Any alert() function call.
5. Configure the delivery method.
6. Test the complete message format.
Alert delivery can depend on:
• PulseWire servers
• the selected symbol
• the selected timeframe
• market-data availability
• realtime feed status
• user alert configuration
• webhook or external-service availability
Creating an alert does not guarantee broker execution.
━━━━━━━━━━━━━━━━━━━━━━
🧪 HOW TO USE THE INDICATOR
━━━━━━━━━━━━━━━━━━━━━━
A practical workflow:
1. Add MACD Momentum Entry Engine to a standard candlestick chart.
2. Begin with the default MACD values of 12, 26, and 9.
3. Keep Entry Timing on Early Trigger while learning the setup types.
4. Keep Momentum Quality on Strict for the default selective profile.
5. Keep Anti-Chop on Strict.
6. Keep Entry Qualification on Strict.
7. Observe whether the event is Reversal, Continuation, Zero Reclaim, or Expansion.
8. Review the MACD histogram, line relationship, and neon signal dot.
9. Review the main-chart LONG or SHORT label.
10. Open the label tooltip to inspect the scores and setup type.
11. Review Momentum, Trend, Regime, Trade, Last Result, and Protection in the dashboard.
12. Verify the selected risk model.
13. When using XAUUSD Fixed Pips, confirm XAUUSD VERIFIED.
14. Treat Entry, SL, TP1, TP2, and TP3 as planning references.
15. Use alerts for monitoring rather than blind execution.
16. Compare every setup with personal structure, session, volatility, and risk rules.
17. Test the exact symbol, timeframe, session, and data feed personally used.
The indicator is designed for structured review.
It should not be treated as an automatic decision-maker.
━━━━━━━━━━━━━━━━━━━━━━
⚙️ SETTINGS REFERENCE
━━━━━━━━━━━━━━━━━━━━━━
⚙️ MACD Core
Calculation Source
Selects the price source used by the MACD calculation.
Fast Length
Controls the fast average.
Default: 12.
Slow Length
Controls the slow average.
Default: 26.
Signal Length
Controls signal-line smoothing.
Default: 9.
MACD Average Type
Selects EMA, SMA, RMA, or WMA for the fast and slow averages.
Signal Average Type
Selects EMA, SMA, RMA, or WMA for the signal line.
━━━━━━━━━━━━━━━━━━━━━━
🎯 Entry Engine
Entry Timing
Early Trigger accepts the confirmed setup event directly.
Momentum Confirmed waits for renewed directional histogram expansion and MACD continuation after the setup is armed.
━━━━━━━━━━━━━━━━━━━━━━
🧠 Momentum Quality Engine
Quality Filter
Selects Off, Loose, Balanced, or Strict.
Strict is the default.
The score combines:
• alignment
• histogram strength
• histogram expansion
• MACD slope
• momentum acceleration
━━━━━━━━━━━━━━━━━━━━━━
📈 Trend Bias Engine
Trend Bias Mode
Selects:
• Off
• Chart EMA
• Higher Timeframe EMA
• Combined EMA
Off is the default.
Trend EMA Length
Controls the chart and higher-timeframe EMA.
Default: 200.
Chart EMA Slope Lookback
Controls the chart-bar lookback used to evaluate EMA direction.
Require EMA Slope Confirmation
Requires a rising EMA for LONG and falling EMA for SHORT.
Higher Timeframe
Selects the confirmed higher-timeframe context.
Default: 60 minutes.
Price-to-EMA ATR Buffer
Requires an optional minimum ATR-normalized distance between price and the trend EMA.
Zero disables the distance requirement.
━━━━━━━━━━━━━━━━━━━━━━
🧱 Anti-Chop Engine
Anti-Chop Filter
Selects Off, Loose, Balanced, or Strict.
Strict is the default.
The regime score combines:
• ADX — 35 points
• price efficiency — 30 points
• EMA separation — 20 points
• volatility expansion — 15 points
━━━━━━━━━━━━━━━━━━━━━━
✅ Entry Qualification Engine
Enable Reversal Setups
Allows MACD crossovers on the opposite side of zero.
Enable Continuation Setups
Allows MACD crossovers on the directional side of zero.
Enable Zero-Line Reclaims
Allows confirmed MACD zero-line crossings with aligned histogram and signal-line conditions.
Enable Momentum Expansions
Allows renewed histogram expansion after contraction while MACD alignment remains valid.
Entry Qualification Filter
Selects Off, Loose, Balanced, or Strict.
Strict is the default.
The score combines:
• candle quality
• MACD separation
• persistence
• price impulse
• trigger context
━━━━━━━━━━━━━━━━━━━━━━
💼 Trade Management Engine
Enable Trade Engine
Enables the one-active-trade-at-a-time visual model.
Risk Model
Selects ATR Based or XAUUSD Fixed Pips.
XAUUSD Fixed Pips is the default.
ATR Length
Controls ATR for the adaptive model.
ATR Stop Multiplier
Controls stop distance in ATR mode.
ATR TP1 Risk/Reward
Controls TP1 distance in ATR mode.
ATR TP2 Risk/Reward
Controls TP2 distance in ATR mode.
ATR TP3 Risk/Reward
Controls TP3 distance in ATR mode.
XAUUSD Pip Size
Controls the price-unit value of one selected pip.
XAUUSD Stop-Loss Pips
Controls fixed Stop distance.
XAUUSD TP1 Pips
Controls fixed TP1 distance.
XAUUSD TP2 Pips
Controls fixed TP2 distance.
XAUUSD TP3 Pips
Controls fixed TP3 distance.
Same-Bar Resolution
Selects Stop First or Targets First.
Show Active TP / SL Zones
Shows Entry, targets, Stop, boxes, and lines on the main chart.
Keep Historical TP3 Zones
Preserves completed TP3 models.
Historical TP3 Trade Limit
Limits completed TP3 models retained on the chart.
Trade Result Labels
Enables SL, Closed TP1, Closed TP2, and TP3 result labels.
SL Label Size
Controls SL result size.
Closed TP1 Label Size
Controls Closed TP1 result size.
Closed TP2 Label Size
Controls Closed TP2 result size.
TP3 Label Size
Controls the separate FULL TARGET label size.
━━━━━━━━━━━━━━━━━━━━━━
🛡️ Signal Filters
Zero-Line Filter
Off allows both sides of zero.
Trend Direction requires LONG above zero and SHORT below zero.
Trend Direction is the default.
Use Absolute Strength Filter
Enables ATR-normalized minimum histogram strength.
Normalization ATR Length
Controls normalization.
Minimum Absolute Strength
Controls the required normalized histogram value.
━━━━━━━━━━━━━━━━━━━━━━
🎨 Visual Settings
Show MACD Line
Shows or hides the MACD line.
Show Signal Line
Shows or hides the signal line.
Show Histogram
Shows or hides histogram columns.
Histogram Visual Length
Changes histogram display scale without changing calculations.
Show MACD Neon Signal Dots
Shows qualified LONG and SHORT dots on the MACD line.
Show Momentum Background
Shows directional momentum background states.
Highlight Blocked Chop Conditions
Shows a neutral background when Anti-Chop blocks entries.
Show LONG / SHORT Labels
Shows or hides main-chart entry labels.
Entry Label Content
Selects Direction Only, Grade, or Score + Grade.
LONG Label Size
Controls LONG label size.
SHORT Label Size
Controls SHORT label size.
━━━━━━━━━━━━━━━━━━━━━━
📟 Mini Dashboard
Show Mini Dashboard
Shows or hides the compact bottom-right main-chart dashboard.
━━━━━━━━━━━━━━━━━━━━━━
🔔 Dynamic Alerts
Enable Detailed Dynamic Alerts
Enables runtime alert() messages.
For these messages, create the PulseWire alert using:
Any alert() function call.
Input values are hidden from the status line.
MACD plot values are also prevented from creating status-line or price-scale labels, while diagnostic values remain available in the Data Window.
━━━━━━━━━━━━━━━━━━━━━━
🧠 WHAT MAKES THIS SCRIPT ORIGINAL
━━━━━━━━━━━━━━━━━━━━━━
MACD, moving averages, ATR, ADX, and trend filters are familiar technical-analysis concepts.
These concepts are not unique by themselves.
The originality of MACD Momentum Entry Engine lies in the coordinated process applied to a MACD event:
Configurable MACD event
→ setup-type classification
→ adaptive momentum-strength baselines
→ five-component Momentum Quality Score
→ optional confirmed trend-bias layer
→ four-component Anti-Chop Regime Score
→ five-component Entry Qualification Score
→ final composite score and grade
→ zero-line and normalized-strength validation
→ confirmed-close signal
→ one-active multi-target trade lifecycle
→ TP3-only historical preservation
→ non-TP3 visual cleanup
→ dynamic alerts
→ main-chart diagnostic dashboard
→ XAUUSD mode verification
Distinctive implementation features include:
• four separate setup families
• different logic for Reversal and Continuation crossovers
• zero-line reclaim detection
• renewed expansion detection without requiring a fresh crossover
• adaptive baselines for strength, expansion, slope, and acceleration
• separate bullish and bearish scoring
• a Momentum Quality Score independent from Entry Qualification
• an Anti-Chop Score independent from momentum quality
• confirmed previous higher-timeframe EMA values
• a 70/30 final composite structure
• A+, A, B, and C grades
• visual-only histogram scaling
• equal-third multi-target internal accounting
• same-candle processing assumptions
• XAUUSD symbol verification
• separate result behavior for TP3 and non-TP3 outcomes
• detailed Data Window diagnostics
The script is not a simple combination of unrelated indicators.
Every module supports the same objective: determining whether a confirmed MACD event has enough momentum, market, and entry context to become a permanent visual setup.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ IMPORTANT PRACTICAL NOTES
━━━━━━━━━━━━━━━━━━━━━━
Signal frequency depends on:
• fast, slow, and signal lengths
• selected average types
• Entry Timing
• enabled setup families
• Momentum Quality mode
• Trend Bias mode
• EMA length
• higher timeframe
• EMA slope requirement
• price-to-EMA buffer
• Anti-Chop mode
• Entry Qualification mode
• zero-line filter
• absolute-strength threshold
• symbol
• timeframe
• session
• volatility
• available history
• data provider
• active-trade state
Strict modes reduce accepted signals.
They do not guarantee better results.
Trend Bias Off allows the momentum engine to evaluate both directions without EMA permission.
Higher Timeframe EMA and Combined EMA should use a timeframe meaningfully above the chart timeframe.
XAUUSD Fixed Pips is designed around a selectable pip convention.
The default 0.01 value may not match every broker or synthetic symbol.
Momentum Confirmed produces later and potentially fewer signals than Early Trigger.
Histogram Visual Length does not alter logic.
Changing settings recalculates historical signals and trade models.
A setup that looks different after changing the chart range may be affected by available historical data and adaptive baselines.
━━━━━━━━━━━━━━━━━━━━━━
⚠️ LIMITATIONS AND SHORTCOMINGS
━━━━━━━━━━━━━━━━━━━━━━
This script has important limitations:
It does not guarantee profitable trades.
It does not predict future price movement.
It does not execute orders.
It does not place broker stops or targets.
It does not include spread.
It does not include commission.
It does not include slippage.
It does not include latency.
It does not model partial fills.
It does not model financing or swap.
It uses bar-based OHLC data.
Historical candles do not reveal exact intrabar order.
Stop First and Targets First are assumptions.
The setup score is not a win probability.
A+ is not a guaranteed outcome.
The Anti-Chop Score cannot identify every ranging condition.
Trend filters can delay or block valid reversals.
Trend Bias Off can allow countertrend signals.
ATR normalization does not make settings universal.
Fixed-pip conventions can differ between brokers.
XAUUSD symbol detection cannot verify a broker’s contract specification.
The dashboard is not PulseWire Strategy Tester.
Data Window counters are not audited account performance.
The internal R model assumes three equal portions.
The internal model does not represent real position sizing.
One-active-trade logic is a visual-management rule.
Alert delivery depends on PulseWire and user configuration.
Changing settings changes historical calculations.
Changing symbol, exchange, session, timeframe, or feed can change signals.
Adaptive baselines depend on available chart history.
Confirmed higher-timeframe values reduce unfinished-HTF changes but introduce delay.
Permanent signals wait for candle close and therefore do not capture the earliest intrabar moment.
For these reasons, the indicator should be used as an educational decision-support tool, not as a standalone automated strategy.
━━━━━━━━━━━━━━━━━━━━━━
👤 WHO THIS SCRIPT MAY BE USEFUL FOR
━━━━━━━━━━━━━━━━━━━━━━
This script may be useful for traders who:
• already understand basic MACD behavior
• want more context than a raw crossover
• study momentum expansion and contraction
• distinguish reversal, continuation, zero-line, and expansion events
• want transparent setup scoring
• want an anti-chop layer
• want optional chart and higher-timeframe trend context
• prefer confirmed-close signals
• want Entry, SL, and three target references
• use XAUUSD and want configurable fixed-pip distances
• want symbol-mismatch warnings
• want a compact dashboard
• want detailed alerts
• want diagnostic Data Window values
• prefer one active visual model at a time
It may be less suitable for users who:
• want guaranteed signals
• want a fully automated trading bot
• want every MACD crossover displayed
• expect a score to equal probability
• expect one setting to work on every market
• require exact tick-level execution
• want Strategy Tester results from an indicator
• want the indicator to replace personal judgment
• expect alerts to execute broker orders automatically
━━━━━━━━━━━━━━━━━━━━━━
🧭 BEST PRACTICE SUGGESTIONS
━━━━━━━━━━━━━━━━━━━━━━
For the default selective profile:
• use standard candlesticks
• begin with MACD 12 / 26 / 9
• keep Entry Timing on Early Trigger
• keep Momentum Quality on Strict
• keep Anti-Chop on Strict
• keep Entry Qualification on Strict
• keep the Zero-Line Filter on Trend Direction
• keep Absolute Strength enabled
• keep all four setup families enabled while learning
• use the dashboard to identify blocked regime conditions
• verify the selected risk model before reviewing trade levels
• use Stop First for conservative historical same-bar handling
• confirm XAUUSD VERIFIED when using Fixed Pips
• use alerts for monitoring rather than blind execution
For additional frequency:
• change Momentum Quality from Strict to Balanced
• change Anti-Chop from Strict to Balanced
• change Entry Qualification from Strict to Balanced
• disable the Zero-Line Filter
• disable Absolute Strength
• keep Trend Bias Off
• use Early Trigger
For additional directional restriction:
• use Chart EMA, Higher Timeframe EMA, or Combined EMA
• enable EMA slope confirmation
• add a Price-to-EMA ATR Buffer
• use a higher timeframe above the chart timeframe
• use Momentum Confirmed instead of Early Trigger
Always:
• wait for the setup candle to close
• review the setup type
• review the score components
• verify market structure independently
• review session and volatility
• verify the stop distance
• use personal position sizing
• test the exact symbol and timeframe
• understand the same-bar assumption
• treat all projected levels as analytical references
━━━━━━━━━━━━━━━━━━━━━━
🔓 PUBLICATION NOTE
━━━━━━━━━━━━━━━━━━━━━━
MACD Momentum Entry Engine is published as an educational momentum-analysis and visual trade-model tool.
The purpose of this description is to explain:
• how the configurable MACD core is calculated
• how average types affect the MACD and signal lines
• how setup events are classified
• how Reversal setups work
• how Continuation setups work
• how Zero-Line Reclaim setups work
• how Momentum Expansion setups work
• how Early Trigger and Momentum Confirmed differ
• how the Momentum Quality Score is constructed
• how adaptive momentum baselines work
• how the Anti-Chop Score is constructed
• how the Entry Qualification Score is constructed
• how final composite scores and grades are assigned
• how chart and confirmed higher-timeframe trend filters work
• how zero-line and absolute-strength filters work
• when permanent signals appear
• how the one-active-trade model works
• how Entry and Stop are calculated
• how TP1, TP2, and TP3 are calculated
• how same-candle ambiguity is handled
• how historical TP3 visuals are retained
• how non-TP3 visuals are cleaned
• how result labels behave
• what the dashboard displays
• how XAUUSD protection works
• what static and dynamic alerts contain
• what diagnostic values are available
• what the timing limitations are
• what the model does not simulate
• why familiar MACD concepts are organized into an original workflow
The script is designed to support structured analysis.
It does not promise profitable results.
It does not remove market risk.
It does not execute trades.
It should not be used as a blind LONG/SHORT system.
MAIN CHART SCREENSHOT PLAN
Use one clean standard candlestick chart.
Show the indicator with its default settings.
The screenshot should contain:
• complete symbol and timeframe information
• the indicator name
• visible standard price candles
• one clear LONG or SHORT label
• one active or completed Entry / TP / SL model
• the white Entry line
• green TP1, TP2, and TP3 levels
• the red SL area and solid SL line
• the MACD pane
• the white MACD line
• the red signal line
• the green/red histogram
• one neon MACD signal dot
• the bottom-right main-chart dashboard
• the Protection state
Do not include:
• other indicators
• manual drawings
• unrelated labels
• social-media links
• pricing information
• promotional claims
• account-profit screenshots
• win-rate claims
• non-standard candles
• hidden symbol or timeframe information
• excessive zoom
• decorative graphics unrelated to the script
The screenshot should demonstrate normal default behavior and make the relationship between the MACD event, main-chart signal, trade model, and dashboard easy to understand.
━━━━━━━━━━━━━━━━━━━━━━
🛡️ DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━━
MACD Momentum Entry Engine is provided for educational and informational purposes only.
It does not constitute financial, investment, trading, legal, or tax advice.
No indicator can guarantee future results.
Markets are uncertain.
Momentum changes.
Volatility changes.
Liquidity changes.
Historical chart behavior does not ensure future performance.
Every user is responsible for their own:
• analysis
• validation
• risk management
• position sizing
• alert configuration
• trading decisions
• broker execution
• legal obligations
• tax obligations
The MACD line, signal line, histogram, momentum states, setup types, quality scores, regime scores, entry scores, composite scores, grades, trend states, LONG and SHORT labels, Entry references, Stop Loss levels, take-profit levels, boxes, result labels, Data Window values, dashboard states, internal counters, and alerts are visual analysis tools only.
The displayed Entry is not a guaranteed fill.
The displayed Stop Loss is not a broker order.
The displayed TP1, TP2, and TP3 levels are not guaranteed objectives.
The Momentum Quality Score is not a win probability.
The Entry Qualification Score is not a probability.
The Market Regime Score is not a guarantee that a market is trending.
The A+, A, B, and C grades are not promises of performance.
The internal trade model does not include spread, commissions, slippage, latency, order-book conditions, contract specifications, or partial fills.
Use this script as a structured MACD momentum-review and decision-support framework, not as a promise of profitability or a substitute for independent judgment. Indicator
Indicator
Momentum Conviction [HermesCore]WHAT THIS INDICATOR DOES
Momentum Conviction watches two things at the same moment: where price momentum turns, and how much agreement stands behind that turn. The turn is an EMA crossover — the fast EMA (Exponential Moving Average) crossing the slow one — but only when the MACD histogram (Moving Average Convergence Divergence, a standard momentum gauge) is leaning the same way. A LONG fires when the fast EMA crosses above the slow EMA while MACD momentum is positive; a SHORT is the exact mirror. A cross with no momentum behind it is ignored.
Every signal that does fire is then graded 0 to 5 by a conviction score, built from five independent checks the moment the signal prints. You decide how much conviction you require: show every signal, or raise the minimum and keep only the ones with weight behind them.
WHY IT IS DIFFERENT
Most moving-average tools print an arrow on every cross and leave you to separate the real ones from the noise by eye. My rules are:
A cross is not a signal on its own. It has to happen while MACD momentum agrees. A large share of the crosses that fail are crosses that fired into flat or opposing momentum; gating on the histogram removes them before they ever reach the chart.
The score is a filter, not decoration. It is not a confidence label added after the fact — it is five yes/no facts, known at signal time, summed. Set a minimum and the weak signals never appear.
The higher timeframe gets a vote, not the final word. One of the five points is HTF agreement, so you can weigh it without being ruled by it.
ADX is deliberately excluded. I tested it repeatedly on the charts this was built for and it did not earn a place.
Everything updates on confirmed bars only. No intrabar flicker, no repainting, and the higher-timeframe reads use no look-ahead.
HOW TO READ THE CHART
LONG bubble (green, below the bar) and SHORT bubble (red, above it) mark each qualifying signal. Bubble size is adjustable.
The gradient EMA cloud is aqua when the fast EMA sits above the slow one (uptrend lean) and magenta when below. The slow EMA carries a soft gold glow so the spine of the trend is always easy to find.
A faint background tint colours the whole pane in the trend colour — a peripheral regime cue, nothing to act on by itself.
A faint gold background band shows the previous day's and previous week's range, for context on where price sits inside the larger structure.
THE CONVICTION SCORE
Each check is worth one point, decided at signal time, and never changes afterwards:
Momentum strength — the MACD histogram is larger than its own 50-bar average: the push is bigger than this market's normal push. +1
Slope agreement — the fast EMA is itself moving in the signal's direction, not merely crossing. +1
Higher-timeframe trend — the chosen HTF (4H by default) is trending the same way; its price and 50/200 EMAs agree. +1
Not over-extended — price is within a set ATR (Average True Range, a volatility measure) distance of the slow EMA, so you are not entering after the move has already run. +1
RSI room — RSI (Relative Strength Index, 0–100) is not already at an extreme in the signal's direction; there is room left to travel. +1
Five of five is a cross with bigger-than-normal momentum, sloping the right way, aligned with the higher timeframe, entered near value, with room to run. Zero is a bare cross with nothing behind it. The minimum-score input is where you set your own bar.
HOW I USE IT
The defaults are deliberately fast (EMA 2/12) — a low-timeframe, many-signals setting. Slow the lengths down for swing work and you get fewer, heavier signals.
I treat a high-score signal that agrees with the higher timeframe as the one worth acting on, and a low-score signal as information about the tape rather than a trade. The honest part: this is trend and momentum logic. It earns its keep when the market trends and gives a good deal of it back in ranges. The regime tint and the HTF vote exist to keep you on the right side of that question, not to solve it — be honest with yourself about which regime you are actually in.
SETTINGS THAT MATTER
EMA fast/slow and MACD lengths — the engine. Defaults are fast; raise them for higher timeframes and fewer, heavier signals.
Minimum score (0) — your conviction bar. 0 shows everything; raise it to thin the chart to signals with agreement behind them.
Higher timeframe (4H) — the trend you check against. Match it to your horizon.
Max distance to slow EMA (2.0 ATR) — how far from value still counts as "not over-extended."
RSI overbought/oversold (72/28) — the "room left" thresholds.
Each score component can be switched off individually if you want to see what it contributes on its own.
ALERTS
Momentum Conviction LONG and Momentum Conviction SHORT, both firing on the confirmed close of the signal bar, with ticker and timeframe in the message.
CALCULATION DETAILS
All logic evaluates on confirmed bars. A signal cannot appear or disappear inside a forming candle.
The trigger is the fast/slow EMA cross; the gate is the sign of the MACD histogram on the same close.
The higher-timeframe trend uses that timeframe's prior-bar close and 50/200 EMAs, requested with no look-ahead, so it does not repaint.
The conviction score is computed once, at signal time, from the values listed above.
HONEST LIMITATIONS
This is trend-following momentum. In a range it will cross back and forth and hand gains back; no filter removes that, it only thins it.
The score is a hypothesis about signal quality, not a measured edge. This indicator does not keep score for you. If you want to know whether higher scores actually perform better on your symbol, run the matching strategy version in the Strategy Tester with realistic costs and read the result yourself.
The defaults trade often. On a live account, slippage and spread on frequent entries matter more than the chart suggests — cost everything before you believe anything.
Signals are evaluated at the close; real fills happen later and worse. Treat the chart as the ideal case.
It runs on any symbol and timeframe, but "runs" is not "has an edge" — whether it works on your market is yours to verify. Past behaviour is not the next signal.
Not financial advice. It manages no positions and places no orders.
ORIGINALITY
The ingredients — EMA crosses, MACD, RSI, ATR — are as old as charting. The momentum-gated trigger, the five-factor conviction score and its use as a hard filter, the regime-aware visual language and the non-repaint construction are my own work in Pine v6. Every value the script uses is recomputable from the rules above.
Questions and suggestions are welcome in the comments. Enjoy. Indicator
Indicator
Indicator
Indicator
Stochastic Histogram Regime [Gabremoku]Stochastic Histogram Regime is a refined Stochastic-based momentum oscillator that transforms classic %K / %D logic into a mid-centered histogram regime model with adaptive zones, squeeze detection, and sequential BUY/SELL signaling.
Instead of using the traditional 0–100 Stochastic layout alone, this script recenters the oscillator around its midline and highlights:
momentum expansion and recovery phases
adaptive extreme zones
K/D compression regimes
sequential crossover signals
squeeze-aware signal styling
a compact live dashboard
The Stochastic Oscillator measures where the current close sits relative to its recent price range, and its two core lines — %K and %D — are commonly used to spot momentum shifts, overbought/oversold conditions, and crossover signals.
What it shows
📊 Mid-centered stochastic histogram — instead of plotting Stochastic only in its standard form, the script centers the histogram around the 50 level so bullish and bearish pressure become easier to compare visually.
📈 %K line and ghost %D line — the main momentum line stays visually dominant, while %D acts as a softer confirmation layer.
🎯 Adaptive zones — rather than relying only on static 80/20 thresholds, the script calculates percentile-based extreme zones from recent Stochastic behavior. Traditional Stochastic readings above 80 are often considered overbought and readings below 20 oversold, but adaptive thresholds can better reflect changing market behavior.
🗜️ Combined squeeze regime — the script measures both:
compression around the midline
compression between %K and %D
This creates a composite squeeze state that helps identify low-momentum contraction phases before expansion.
🚦 Sequential BUY/SELL state machine — primary signals are filtered through K/D crossover logic, slope confirmation, and optional extreme-zone requirements.
🔺 Follow-up triangles — repeated same-direction confirmations after the first primary signal can be shown as lighter continuation markers.
🪧 Minimal dashboard — displays state, K/D values, adaptive zone range, slope, and squeeze status.
Core logic
The script is built around the idea that the Stochastic Oscillator is not just an overbought/oversold tool, but a momentum regime detector.
Classic Stochastic compares the latest close to the recent high-low range and is typically interpreted through:
%K and %D crossovers
movement around 80/20 zones
and changes in momentum before price fully reacts
Your script extends that by:
recentering the oscillator around 50
using histogram structure for directional emphasis
adapting extreme zones to recent behavior
and combining crossover quality with slope and squeeze context
This makes it more structured than a standard Stochastic display.
State model
The indicator classifies momentum into five readable states:
Bull Impulse
Bull Recovery
Bear Impulse
Bear Recovery
Neutral
This adds nuance to the usual Stochastic reading because it separates:
strong directional continuation
weaker recovery phases
and non-directional compression
In practice:
Bull Impulse suggests K is above D, above the mid-neutral area, and still rising
Bear Impulse suggests K is below D, below the mid-neutral area, and still falling
recovery states identify improving momentum before full expansion
Signal logic
The script uses a filtered signal engine based on %K / %D crossovers, which are among the most common Stochastic signals.
Primary BUY and SELL signals can be filtered by:
extreme zone location
K slope confirmation
signal mode: Aggressive, Balanced, or Strict
This helps reduce the classic problem of noisy Stochastic crossovers in sideways conditions. Stochastic crossovers are useful, but they generally become more meaningful when combined with trend or momentum context rather than taken in isolation.
How to read it
A practical reading method is:
Use the histogram around the midline to read directional pressure.
Use adaptive zones to identify statistically stretched momentum.
Use %K / %D crossovers for trigger logic.
Use the squeeze state to identify contraction before expansion.
Treat follow-up triangles as continuation confirmation, not as fresh primary entries.
In general:
positive histogram with rising K = improving bullish momentum
negative histogram with falling K = improving bearish momentum
squeeze ON = compressed momentum regime
BUY/SELL labels = primary filtered crossover signals
Features
✅ Mid-centered stochastic histogram
✅ %K and ghost %D structure
✅ Percentile-based adaptive extreme zones
✅ Neutral zone around the 50 midline
✅ Composite squeeze detection
✅ Sequential BUY / SELL state machine
✅ Optional follow-up continuation markers
✅ Overlay and pane signal display options
✅ Minimal live dashboard
✅ Alert conditions for BUY, SELL, and squeeze state
Notes
This indicator is designed to improve the readability of Stochastic momentum structure, especially in transitions between compression, recovery, and impulse phases. Like all Stochastic-based tools, it can produce noisy signals in choppy markets, and overbought/oversold readings should generally be interpreted as momentum context rather than automatic reversal calls.
Author: Gabremoku
Pine Script v6 Indicator
Dual MA Gradient [Gabremoku]Dual MA Gradient is a clean dual moving average overlay designed to highlight not only MA direction and crossover, but also the degree of separation between the two averages through a dynamic gradient ribbon.
The script uses two configurable moving averages and transforms their relationship into a visual ribbon that reacts to:
bullish alignment
bearish alignment
neutral compression
Instead of relying only on a simple crossover, the indicator helps show whether the two averages are:
crossing,
compressing,
or expanding apart
That makes it useful as a compact trend-structure tool for traders who want an at-a-glance read on direction and relative momentum.
What it shows
📈 Two configurable moving averages — each MA can be set independently using:
EMA or SMA
custom length
custom source
🌈 Directional gradient ribbon — the space between the two averages is divided into layered fills that create a smooth visual ribbon.
🟦 Bullish separation — when the fast MA is above the slow MA, the ribbon shifts to bullish color.
🟨 Bearish separation — when the fast MA is below the slow MA, the ribbon shifts to bearish color.
⚪ Compression state — when the spread between the two MAs becomes small enough, the ribbon fades into a neutral state to signal contraction.
🏷️ Status label — optional live label shows the active state:
Compression
Bullish Separation
Bearish Separation
⭕ Cross markers — optional markers can be shown when bullish or bearish MA crosses occur.
Core logic
The indicator is built around three simple but useful ideas:
Which MA is on top
How far apart the two MAs are
Whether the spread is strong enough to be directional or too tight and neutral
A moving average crossover occurs when a shorter-period average crosses a longer-period average, and it is commonly used to identify trend shifts or signal changes in directional bias.
This script goes a step further by emphasizing the spread between the averages. That matters because ribbon spacing is often used as a visual clue for trend structure: when averages are compressed, the market may be in transition or contraction, while a wider directional ribbon can reflect stronger alignment.
How to read it
A practical reading method is:
Compression = the two averages are close together, market may be transitioning or losing directional clarity
Bullish separation = the fast MA is above the slow MA and the ribbon is opening upward
Bearish separation = the fast MA is below the slow MA and the ribbon is opening downward
In many moving-average frameworks:
the cross helps identify the directional shift
the spacing helps evaluate whether that shift is weak or established
a tight ribbon often suggests indecision or a developing transition
Features
✅ Dual moving average framework
✅ SMA or EMA selection for both lines
✅ Fully customizable lengths
✅ Dynamic layered ribbon between MAs
✅ Bullish / bearish / neutral compression states
✅ Optional MA line display
✅ Optional live status label
✅ Optional crossover markers
✅ Built-in bullish and bearish crossover alerts
Notes
This indicator is designed as a trend-visualization tool rather than a complete standalone strategy. Like all moving-average systems, it is inherently lagging, so it is generally more useful for confirming structure and directional bias than for predicting reversals in isolation.
Author: Gabremoku
Pine Script v6 Indicator
Multi MA Framework [Gabremoku]Multi MA Framework is a flexible multi-moving-average overlay built for traders who want a clean and fully customizable MA workspace directly on the chart.
The indicator lets you plot up to four independent moving averages, each with its own:
visibility toggle
length
MA type
color
This makes it useful for traders who want to combine fast and slow averages, compare SMA vs EMA behavior, or build a personalized trend framework without loading multiple separate indicators.
What it shows
📈 Up to 4 Moving Averages — each line can be configured independently and displayed only when needed.
⚙️ SMA or EMA per line — choose the moving average type separately for each MA. SMA gives equal weight to all values in the period, while EMA gives more weight to recent prices and typically reacts faster to change.
🏷️ End Labels — optional right-side labels show each MA name, type, and length.
☁️ Cloud Fills — optional fills between:
MA 1 / MA 2
MA 3 / MA 4
These clouds help visualize alignment and separation between faster and slower averages.
Core idea
This script is designed as a moving average framework, not a rigid strategy.
Moving averages are commonly used to:
identify trend direction
smooth noisy price action
monitor dynamic support and resistance
compare short-term and long-term market structure
By allowing different lengths and SMA/EMA choices on every line, the script makes it easy to create your own structure, for example:
fast trend stack
swing trend map
long-term bias model
crossover-based workflow
How to use
A practical way to use the framework is to combine shorter and longer averages.
For example:
a shorter MA can track immediate momentum
a medium MA can define swing direction
a longer MA can define higher-level trend bias
When multiple moving averages align in the same direction, traders often interpret that as stronger trend structure. Crossovers between faster and slower averages are also widely used to monitor possible trend shifts, although they are lagging by nature.
Example setups
Here are some common ways this framework can be configured:
Trend stack: 10 EMA / 20 EMA / 50 EMA / 200 SMA
Swing trader view: 20 EMA / 50 SMA / 100 SMA / 200 SMA
Minimal structure: show only 2 lines and enable one cloud
Cross comparison: use SMA on one line and EMA on another with the same or similar length to compare responsiveness
Because EMA reacts faster and SMA is smoother, combining both can help balance responsiveness and stability.
Features
✅ Up to 4 fully independent moving averages
✅ SMA or EMA selection for each line
✅ Custom length for each MA
✅ Custom color for each MA
✅ Visibility toggle for every line
✅ Adjustable line width
✅ Optional right-side end labels
✅ Optional MA1/MA2 cloud fill
✅ Optional MA3/MA4 cloud fill
✅ Clean chart overlay design
Notes
This indicator is best used as a custom trend structure tool rather than a standalone signal engine. Moving averages are inherently lagging indicators, so they are most effective when used to define context and trend bias rather than predict reversals on their own.
Author: Gabremoku
Pine Script v6 Indicator
Indicator
Indicator
Pymander's MA SuitePymander's MA Suite is a versatile and all-in-one toolkit designed to give you total control over your trend analysis. Whether you’re a scalper looking for quick crossovers or a swing trader tracking long-term trends, this suite is built to be the only moving average indicator you’ll ever need.
What makes it unique?
Unlike standard MA ribbons that lock you into one type of calculation, EZ MA Suite gives you 5 fully independent slots. You can mix and match different lengths, sources, and—most importantly—12 different MA types in a single indicator. We’ve also cleaned up the visuals with "premium" signal placement and modern icons so your chart stays professional and clutter-free.
The Powerhouse MA Selection
You have access to a massive library of moving averages to fit any strategy:
The Classics: SMA, EMA, WMA, RMA, VWMA.
The Smooth & Fast: HMA (Hull), ALMA (Arnaud Legoux), and LSMA (Least Squares).
The Lag-Killers: DEMA (Double), TEMA (Triple), and ZLEMA (Zero Lag).
The Adaptive: KAMA (Kaufman), which adjusts itself based on market noise!
Stay on the Right Side of the Move
We’ve integrated a smart Buy/Sell Signal engine based on crossovers. You simply pick which of your 5 MAs is the "Fast" one and which is the "Slow" one.
But here’s the game-changer: The Trend Filter.
To help you avoid "choppy" fakeouts, you can enable a trend filter using a third MA (like a 200 SMA). When active, the suite will only show Buy signals if you're in an uptrend and Sell signals if you're in a downtrend. It’s all about keeping you aligned with the "big money" flow!
💬 We want to hear from you!
I built this to make our trading lives easier, but I’d love to know how you’re using it. Do you have a favorite MA combination? Is there a specific feature you’d like to see next? Drop your feedback and let’s keep improving this suite together!
Wishing you all lots of luck and many, many green days!!
— Pymander Indicator
Strategy
VWRSI Crossovers & Extremes [The AI Trading Desk]VWRSI Crossovers & Extremes
By integrating real volume into the RSI calculation, this engine surfaces only the moves that have money behind them. The hype-driven wiggles get filtered. The conviction moves stand out.
And then it tells you exactly what to do.
Two clear ways to act — no guesswork:
🔥 Extreme Release Signals — the RSI mistake most traders make
Most traders are taught RSI wrong. They sell the second it crosses 70 and buy the second it crosses 30 — and then they watch the market keep ripping in the same direction without them, or worse, against them. Here's the truth: RSI can stay in extreme zones far longer than you expect. Selling overbought into a strong trend is how accounts bleed.
This indicator doesn't fire when RSI enters an extreme zone. It fires when VWRSI comes back out of one. An orange flash and a labeled Up or Dn triangle mark the exact bar where momentum returns to normal range — meaning the extreme is resolving, not building. You're not fighting the trend. You're acting once the move has cooled and momentum has rotated back to your side.
How to use it:
Wait for the orange flash + triangle — don't act when VWRSI hits 70 or 30, act when it leaves
Down triangle (Dn) at the top — overbought is resolving, momentum cooling, look for short setups or trim longs
Up triangle (Up) at the bottom — oversold is resolving, momentum reviving, look for long setups or cover shorts
Best paired with structure — confluence with key levels, prior swing points, or trendlines tightens the edge
🌊 Crossover Confirmation — the answer to chop and fake-outs
Raw VWRSI crosses happen all day. Most are noise. The trick is waiting for the VWRSI to cross its signal moving average — that's the moment when short-term momentum has shifted decisively against the smoothed average, not just twitched.
The fill color flips with the cross — green for bullish momentum, red for bearish. By waiting for this confirmed cross instead of acting on every wiggle, you skip the chop, dodge the fake-outs, and only enter when the regime has actually changed. It's slower, on purpose. That's the point.
How to use it:
Watch the cloud color — green means VWRSI is above its MA (bullish bias); red means below (bearish bias)
Enter on the flip — when the color changes, momentum has rotated. Trend traders take entries with the new direction.
Stay in until it flips back — exits trigger when the cloud color reverses, signaling the regime has changed again
Skip the in-between — when VWRSI is hugging the MA closely (thin cloud), the market is undecided. Wait for separation.
Why this hits different:
Volume integrated into momentum calculation — high-volume bars influence momentum more than low-volume drift. Real moves stand out.
Both tops AND bottoms flagged — most VWRSI tools only catch one side. This catches both, with equal clarity.
No mystery readings — every signal has a name and a job. If you can't explain what your indicator is telling you, you can't trust it.
Calm when the market is calm — no constant red clouds during chop. The line stays quiet so you don't overtrade.
Built for traders who are tired of:
Selling tops too early and watching the trend keep running
Buying every dip into oversold and getting steamrolled
Indicators that fire constantly but rarely matter
Beautiful clouds that look great in screenshots but trick you into bad entries
Two trade types. Three visual cues. Zero guesswork.
Defaults: VWRSI 14, MA 9, OB 70, OS 30 — fully customizable.
Built by The AI Trading Desk. Indicator
VWAP Cross Flow Engine [AGPro Series]VWAP Cross Flow Engine
🔹 OVERVIEW
VWAP Cross Flow Engine is a precision scoring system for price-to-VWAP
crossovers. Instead of treating every VWAP cross as a binary signal,
this indicator measures the QUALITY of each crossover event in real
time using a weighted composite score derived from momentum, volume
expansion and optional sigma-band confluence. The engine is designed
for intraday scalpers and swing traders who rely on VWAP as a dynamic
equilibrium reference and need a structured way to separate high-
conviction continuation crosses from low-quality noise flips.
The script plots an anchored Volume-Weighted Average Price line with
optional volume-weighted standard-deviation bands, detects every
price/VWAP crossover event, scores each one on a 0–100 scale and
visualizes the result through compact X markers, directional bar
coloring, a retrospective quality dashboard and a dynamic bias zone
anchored on the strongest crosses.
🔸 UNIQUE EDGE
Most VWAP-based tools stop at plotting the line and marking raw
crossovers. VWAP Cross Flow Engine adds a multi-factor quality layer
on top of the crossover itself:
• Every cross receives a composite score, not a pass/fail flag
• Momentum sub-score derived from RSI distance from 50 at cross bar
• Volume sub-score derived from current volume vs SMA baseline
• Optional confluence bonus when cross occurs beyond 2-sigma envelope
• Retrospective follow-through measurement in ATR units
• Session-aware counters with automatic daily-vs-higher-timeframe
label switching
• ATR-based cooldown filter that prevents label overlap on any
timeframe, not just bar-count cooldowns that fail on daily charts
The combination of live scoring + retrospective success tracking in a
single panel is the core differentiator. It allows the trader to both
filter new crosses and study the historical reliability of VWAP cross
behavior on any symbol and timeframe.
🔷 METHODOLOGY
1. VWAP CALCULATION
Volume-weighted average of HLC3 (configurable) anchored to the
Session, Week or Month boundary. Cumulative price*volume and
cumulative volume series are reset at every anchor change.
2. SIGMA BANDS (optional)
Volume-weighted variance computed as E − E ² where X is the
source price weighted by volume. Square root produces the true
volume-weighted standard deviation. 1σ and 2σ envelopes are drawn
around the VWAP line.
3. CROSS DETECTION
Standard ta.crossover / ta.crossunder between close and VWAP.
4. QUALITY SCORING
• Momentum sub-score: |RSI(14) − 50|, scaled to 0–40 range
• Volume sub-score: volume / SMA(20), capped at 3x, scaled 0–30
• Confluence bonus: +5 if prior bar touched the opposing 2σ band
• Total live score (max 70 or 75) is rescaled to 0–100
5. COOLDOWN FILTER
A new cross is only plotted if BOTH conditions are met:
• At least N bars since the last plotted cross
• At least K × ATR price distance from the last plotted cross
6. FOLLOW-THROUGH TRACKING
Each cross is stored with its direction, price and ATR at the time
of the event. After N bars, the displacement (in the cross
direction) is measured. Success rate and average follow-through
in ATR units are maintained inside a rolling lookback window.
7. QUALITY ZONE
A rectangle zone (0.8 × ATR tall by default, 60 bars long) is
drawn at every strong cross (score ≥ 70). The zone acts as a
dynamic bias area anchored on high-conviction VWAP interactions.
🔶 SIGNALS & ALERTS
The indicator fires five distinct alert conditions:
1. High-Quality VWAP Cross Up — bullish cross above the min quality
threshold with cooldown satisfied.
2. High-Quality VWAP Cross Down — bearish cross above the min quality
threshold with cooldown satisfied.
3. Strong VWAP Cross (≥70) — score 70 or higher; anchors a new
quality zone.
4. Price Reached +2σ Band — price extended to the upper sigma band
(optional, requires bands enabled).
5. Price Reached −2σ Band — price extended to the lower sigma band
(optional, requires bands enabled).
🔹 KEY INPUTS
VWAP Reference
• Source — price series used for VWAP (default HLC3)
• Anchor Type — Session / Week / Month
• Show VWAP Line
Sigma Bands
• Show Sigma Bands (default OFF)
• Inner Band Multiplier (default 1.0)
• Outer Band Multiplier (default 2.0)
Quality Engine
• Momentum (RSI) Length
• Volume Average Length
• Follow-Through Bars
• ATR Length
• Min Quality To Plot (default 50)
• Use Sigma Confluence Bonus
• Cooldown — Minimum Bars (default 5)
• Cooldown — Minimum ATR Distance (default 0.5)
Visuals
• Show Cross X Labels
• Show Target Projection (default OFF)
• Show Quality Zone
• Quality Zone Height (ATR) / Length (Bars)
• Color Bars By Cross Strength
• Auto Label Size (upscale on 1D+)
Panel
• Show Dashboard Panel
• Panel Position (6 positions)
• Panel Theme (Dark / Light)
• Panel Font Size
• Success Rate Lookback Bars
🔸 HOW TO USE
• INTRADAY SCALPING — use Session anchor on 5m–1h charts. Focus on
crosses scoring 70 or higher. The quality zone becomes a short-term
bias area: price holding above a bull zone mid-line tends to favor
continuation, breaks back through the mid-line tend to indicate
weakening conviction.
• SWING BIAS — use Week or Month anchor on 4h and daily charts. Treat
strong crosses as potential regime-shift events. Monitor the
Success Rate metric to calibrate expectations for the current
market and instrument.
• MEAN-REVERSION — enable sigma bands and confluence bonus. Crosses
that form after a 2σ stretch tend to score higher and mark
statistically meaningful reversal attempts.
• FILTER CALIBRATION — raise Min Quality To Plot to 60 or 70 for
high-selectivity environments; lower to 40 for noisier instruments
where you want earlier confirmation.
The dashboard gives at-a-glance context: how many crosses have fired
this session, how many were strong, what the historical win rate
looks like in the current lookback window, the average ATR-normalized
follow-through, and whether price is currently above or below VWAP.
🔷 LIMITATIONS & TRANSPARENCY
• This is NOT a strategy and does not generate buy/sell orders.
• Score is a quality filter, not a directional prediction. A high-
score cross still carries market risk and can fail.
• Follow-through statistics depend on lookback window size and
timeframe; adjust Success Rate Lookback to match your trading
horizon.
• Sigma bands require a reliable volume feed. On low-liquidity
instruments the bands may be noisy or meaningless.
• Anchored VWAP resets at each new anchor (Session / Week / Month);
early-in-anchor values use fewer samples and are less stable.
• The indicator repaints only within the cross bar itself (like any
crossover detector). Once a bar closes, the plotted cross and its
score are fixed.
🔶 RISK DISCLOSURE
This script is a technical analysis tool intended for educational
and analytical purposes. It does not constitute financial advice,
investment advice or a recommendation to buy or sell any asset.
Trading financial markets involves substantial risk of loss. Past
performance of any indicator is not indicative of future results.
Users are fully responsible for their own trading decisions and
should combine this tool with independent analysis and proper risk
management. Indicator
Indicator
Murphy Timeframe LensMURPHY TIMEFRAME LENS
Reading time: ~2 min
█ OVERVIEW
Murphy Timeframe Lens is a timeframe compression tool inspired by John Murphy's explanation of weekly and monthly bar charts in Chapter 3 . The indicator displays higher timeframe structure directly on your current chart, helping traders study markets from a longer-range perspective without switching timeframes.
As Murphy explains, compressing data into larger bars allows chartists to see the bigger picture. A 15-minute bar on a 1-minute chart contains 15 bars of price action. An hourly bar can represent 60 minutes of trading activity.
The indicator adapts to different trading styles: intraday scalpers can use 15m or 1H compression on 1-minute charts, swing traders can view daily structure on 4H charts, and position traders can see weekly or monthly compression on daily timeframes.
═══════════════════════════════════════════════════════════════════
█ FEATURES
Multi-Timeframe Compression
The indicator offers seven timeframe options: 15m, 30m, 1H, 4H, Daily, Weekly and Monthly . Each fetches higher timeframe OHLC data and overlays it on your current chart.
The default 15m setting follows the two timeframes higher principle — when trading on 1-minute charts, viewing 15-minute structure provides directional context without excessive lag. This compression ratio balances noise reduction with real-time relevance.
For different base timeframes, select the appropriate HTF. 1-minute charts work well with 15m or 1H. 5-minute charts pair with 1H or 4H. Hourly charts benefit from Daily or Weekly compression.
Three Display Modes
The indicator offers three visualization options to match different analysis needs.
OHLC Bars — shows the full higher timeframe bar structure: open, high, low, and close levels with shaded range zones and clear O/C labels marking exact price levels.
Close Line — displays only the higher timeframe closing price as a stepped trend line, emphasizing directional bias without visual clutter.
HL Zones Only — plots just the high and low boundaries, creating range bands that show where the higher timeframe bar is trading.
Progressive Range Tracking
The indicator builds HTF high and low boundaries progressively as the timeframe bar develops. When a new 15-minute bar starts on a 1-minute chart, the high and low begin at current price and expand as subsequent 1-minute bars extend the range.
This prevents look-ahead bias — HTF boundaries reflect only information available at each moment, not the final bar values. Labels mark HTF open and close levels with exact prices for precise reference.
═══════════════════════════════════════════════════════════════════
█ VISUAL LEGEND
• Green shaded zone — HTF bar closed bullish (close above open)
• Red shaded zone — HTF bar closed bearish (close below open)
• O label (green) — HTF open level with exact price — where the HTF bar started
• C label (green/red) — HTF close level with exact price — where the HTF bar ended
• Blue dots — HTF high boundary (progressive, expands as bar develops)
• Orange dots — HTF low boundary (progressive, expands as bar develops)
• Gray background flash — new HTF bar started
═══════════════════════════════════════════════════════════════════
█ BEST USE CASES
• 1-minute scalping with 15m or 1H structure for intraday bias
• 5-minute trading with 1H or 4H compression for session context
• 4H swing trading with Daily or Weekly structure for trend alignment
• Identifying when price tests HTF boundaries (support/resistance zones)
═══════════════════════════════════════════════════════════════════
█ DISCLAIMER
This script is for educational and analytical purposes only. It is not financial advice. Trading involves risk, and all decisions remain the responsibility of the user. Indicator
Indicator
