CrosswindCROSSWIND
Crosswind is a signal and trade management indicator built on EMA crossovers, but the crossover itself is only the starting point. Most crossover systems break down in two predictable places. They enter on the cross, which is very often the worst price in the whole move, and they exit at a fixed percentage target, which caps the rare large trends that are supposed to pay for all the small losers. Crosswind addresses both problems and then reports every result net of trading costs, so you can judge whether an edge actually survives the fee schedule.
THREE TIMEFRAME PRESETS
Selecting a trading style sets the EMA pair for you. 15 Min Scalping uses 9 and 21. 1 Hour Swing uses 13 and 48. Daily Trend uses 15 and 150. The preset also sets the width of the trailing stop, since noise that is meaningless on a daily chart will repeatedly eject you from a position on a 15 minute chart.
TREND FILTER
A 200 period SMA gates direction. Long signals are only considered while price trades above it and short signals only while price trades below it. The chart background shades faint green above and faint red below so the active regime is visible at a glance.
TWO SIGNAL MODES
Crossover mode fires when the fast EMA crosses the slow EMA in the direction of the trend filter.
Pullback mode waits. After the fast EMA crosses above the slow EMA, no signal is issued yet. The indicator waits for price to retrace into the slow EMA and then close back across it, within a window of bars that you control. You are buying the first dip after trend confirmation rather than the extension itself. Fewer signals, but a materially better average entry, and your initial stop sits closer to structure.
OPTIONAL MACD CONFIRMATION
A standard MACD can be required to agree with the signal direction. It reduces frequency and filters some counter momentum entries.
HOW A TRADE IS MANAGED
Risk is measured in R, where 1R is the initial stop distance of 2x ATR. Every number the indicator reports is expressed in these units, which makes results comparable across symbols and volatility regimes.
A trade passes through three stages.
Initial stop. Placed 2x ATR from entry. Nothing moves while the trade is proving itself.
Breakeven. Once the trade reaches 1R in your favour, the stop advances to entry plus the full round trip cost plus a small cushion. This is a real breakeven, not a nominal one, so a trade stopped at this stage does not quietly book a small loss.
Trail. Once the trade reaches 1.5R, a chandelier trail arms. It tracks the highest high reached since entry, offset by an ATR multiple, and it only ever ratchets in your favour. The stop line turns blue when the trail is live, so the current stage is always obvious on the chart.
There is no fixed profit target by default. A winning trade runs until the trail takes it out. If you want a cap for comparison purposes you can set a hard target expressed in R.
An alternative EMA trail is included, which follows the slow EMA with an ATR buffer, for traders who prefer a moving average exit.
COST ACCOUNTING
Fees and slippage are charged per side against the actual entry and exit prices, so cost scales properly with price rather than being a flat assumption. Funding is optional and charged per eight hours held, scaled by your chart timeframe. Defaults assume 0.06 percent taker fees and 0.02 percent slippage. Lower the fee if you post maker orders.
This matters more than most traders expect. Cost per trade is roughly twice the round trip percentage divided by the stop distance. On a daily chart with a wide stop this rounds to almost nothing. On a 15 minute chart with a tight ATR it can exceed a tenth of an R on every single trade, which is enough to turn a system with a respectable win rate into a losing one.
READING THE LABEL
The status label reports the live trade state and the closed trade record. Net R and average R per trade are the headline numbers. Gross R and cost drag are shown alongside them deliberately. If cost drag is consuming a large fraction of gross R, the honest conclusion is that the configuration trades too frequently for the size of its edge, and the fix is a stricter entry filter rather than a cleverer exit.
Best and worst trade, win rate, and the outcome of the most recent trade are also shown. Trend following configurations typically produce a win rate below fifty percent while remaining profitable, because the winners are much larger than the losers. Judge the system on average R, not on win rate.
ALERTS
Five alert conditions are available. Long signal, short signal, either signal, stop or trail hit, and trail armed.
THE CONFIGURATION I USE
1 Hour Swing preset with signal mode set to Pullback, and the reversal option left off so that an opposite signal does not close and flip an open position. Trades finish on their own stop or trail, and the next signal is only taken once flat. This produces a lower trade count with cleaner entries and lets the trail do the work of deciding when a move is over.
LIMITATIONS WORTH KNOWING
Signals evaluate on bar close. Stop resolution uses the level carried in from the previous bar before the trail updates on the current bar, which avoids look ahead but means the trail lags by one bar. When a single bar's range covers both the stop and a hard target, the result is scored as a stop, because OHLC data cannot reveal which level was reached first. The statistics are a study of signal quality, not a full backtest, and they assume constant risk per trade with no position sizing or compounding.
This indicator is a tool for analysis and is not financial advice. Test any configuration on your own market and timeframe before risking capital. Indicator
Indicator
Cross-Ticker AMT + POC LadderCross-Ticker AMT + POC Ladder
OVERVIEW
You trade one chart, but you usually care about more than one market. If you are on ES, where NQ sits relative to its own key levels matters, and the reverse is just as true. This indicator puts another symbol's full reference-level stack onto your current chart as a compact price ladder, so you can see at a glance whether the market you are monitoring is pressing into support or resistance, without ever leaving your chart.
Two index futures trade at very different price scales (ES near 5,800, NQ near 20,000), so you cannot plot one symbol's levels as horizontal lines on the other's chart, they would land off screen. The ladder solves this by showing the monitored symbol's levels, its live price, and the distance to every level in both points and percent inside a table.
WHAT IT SHOWS
pdH / pdL: prior day high and low (RTH session)
OVN H / OVN L: overnight (Globex) session high and low
pwH / pwL: prior week high and low
pmH / pmL: prior month high and low
pdPOC, pwPOC, pmPOC: prior day, week, and month volume Point of Control
pmVAH / pmVAL: prior month Value Area High and Low
dPOC / wPOC / mPOC: developing day, week, and month POC (optional)
The ladder is sorted high to low with a PRICE marker inserted at the monitored symbol's current price. Levels above price read as resistance, levels below read as support, and the nearest level on each side is highlighted so the next decision point is obvious.
VOLUME PROFILE METHOD
POC and Value Area are calculated from a binned volume profile of the monitored symbol, not estimated. The prior month POC, VAH, and VAL use a dedicated engine that distributes each bar's volume across its high to low range into fixed price rows, then expands the value area outward from the POC until the chosen percentage of total volume is enclosed (default 68 percent). Row size, value area percent, and the calculation timeframe are all adjustable so you can match the profile resolution you use elsewhere.
A High Volatility Mode is included for wide-range instruments. When enabled it builds the prior month profile from coarser bars and widens the row size, which is lighter on PulseWire's calculation budget. Turn it on for products like NQ, or if the prior month values come up blank or the script is slow to load.
SETTINGS
Monitored symbol, RTH session, and overnight session
Individual on/off toggle for every level
Profile row size, value area percent, RTH-only vs full session, and High Volatility Mode
Full control over colors, cell and header backgrounds, text size, decimals, and table position
Proximity threshold (percent) used for highlighting and alerts
ALERTS
Named conditions fire when the monitored symbol comes within your threshold of its nearest resistance, nearest support, or any level. A dynamic alert that names the exact level it is approaching is also available.
NOTES AND LIMITATIONS
Highs and lows are exact. POC and Value Area depend on profile resolution and row size, so set the row size to suit the monitored symbol (for example a finer row for ES, a coarser row for NQ).
Prior week and month levels populate once enough history is loaded. On very low timeframes you may need to load more bars before they appear.
This is a context tool. The monitored market tagging one of its levels only informs your chart to the degree the two instruments are tracking together. On divergent sessions, weight it accordingly.
Add the indicator more than once to monitor several symbols at the same time, each instance is independent.
This script is provided for education and market analysis only. It is not financial advice, and nothing here is a guarantee of any result. Trade your own plan and manage your own risk. Indicator
Cross Exchange Premium Drift Map [AGPro Series]Cross Exchange Premium Drift Map
🧠 Core Idea
Is the active crypto venue drifting away from the exchange basket, or is the market staying aligned across venues?
📌 Overview / What it does
Cross Exchange Premium Drift Map is a crypto market structure tool designed to compare the active chart against a configurable basket of exchange reference symbols.
Instead of reading only the local chart, the script builds a venue basket from multiple exchange feeds and measures whether the active venue is trading at a premium, discount, or neutral alignment versus that basket.
It produces a premium drift path, a dispersion path, a right-side venue premium stack, event labels, strongest/weakest venue context, and a compact panel. It does not predict price direction, automate trading, or claim that a premium will close immediately.
🎯 Purpose & Design Philosophy
This script was built to fill a specific gap in crypto analysis: many traders look at one exchange chart and assume that chart represents the whole market.
Crypto is fragmented across venues. Premiums, discounts, and venue dispersion can appear before important shifts in liquidity, risk appetite, or execution quality.
The purpose of this tool is to make that fragmentation visible in a structured, readable, and non-predictive way.
⚡ Why This Script Is Different
Most tools focus on the active chart alone, or compare futures against spot using a basis model.
This script does NOT operate as a funding, carry, open interest, or perp-versus-spot basis indicator.
Instead, it compares the active venue against a configurable cross-exchange reference basket, then maps premium drift, venue dispersion, strongest venue, weakest venue, and alignment quality into a dedicated visual workflow.
⚙️ Methodology
1. Venue Basket Construction
The script requests multiple user-defined exchange symbols and builds an average reference basket from available venue prices.
2. Premium Drift Detection
The active chart is compared against the venue basket to calculate premium or discount.
3. Dispersion Evaluation
The script measures how far individual venues are spread around the basket.
4. State Classification
Premium, discount, spread expansion, spread compression, and exchange alignment are converted into readable states.
5. Visual Output
The chart displays premium paths, event labels, a right-side venue stack, and a panel summary.
🗺️ How to Read the Chart
The premium drift path shows how the active chart behaves relative to the venue basket.
The dispersion path shows whether exchange prices are widening away from each other or compressing toward alignment.
The right-side venue stack shows the current premium/discount context, basket drift, dispersion, strongest venue, and weakest venue.
Labels mark meaningful changes such as Venue Premium, Venue Discount, Spread Expansion, and Exchange Alignment.
The panel summarizes state, score, premium, drift z-score, velocity, dispersion, direction, grade, and venue count.
🚦 Signals & States
• Venue Premium → the active chart trades meaningfully above the exchange basket
• Venue Discount → the active chart trades meaningfully below the exchange basket
• Spread Expansion → venue dispersion is widening
• Spread Compression → venue prices are moving closer together
• Exchange Alignment → venues are compressed and the active chart is near the basket
• Check Venue Set → selected symbols may not represent the same asset or may be mismatched
🔔 Alerts Logic
Alerts trigger when the script detects a fresh state transition into a meaningful venue condition.
Venue Premium alerts mark active-chart premium pressure versus the basket.
Venue Discount alerts mark active-chart discount pressure versus the basket.
Spread Expansion alerts mark widening cross-exchange dispersion.
Exchange Alignment alerts mark compression toward venue agreement.
Alerts are attention markers, not trade instructions.
🧩 Confluence Logic
The strongest readings occur when premium drift, drift z-score, velocity, dispersion, and persistence align.
When these conditions align, the venue message becomes more meaningful, but it still remains context rather than a prediction.
📊 When to Use
• Crypto spot charts with active multi-exchange liquidity
• BTC, ETH, and major liquid altcoin pairs
• Periods where venue premium, discount, or spread quality matters
• Market structure review before interpreting local price action
• Cross-exchange monitoring during volatile sessions
⚠️ When NOT to Use
• Illiquid symbols with unreliable venue references
• Symbols where the basket does not match the active chart asset
• Extremely noisy low-timeframe conditions
• Markets where one or more venue feeds are missing or stale
• Situations where the user expects guaranteed arbitrage signals
🎛️ Key Inputs
• Venue Symbols → define the exchange reference basket
• Venue Labels → control the short exchange names shown in the visual stack
• Premium Threshold → controls when active-chart premium or discount becomes relevant
• Dispersion Threshold → controls when cross-exchange spread widening matters
• Premium Baseline Length → controls the drift baseline
• Premium Z-Score Length → controls normalization
• Visual Settings → control panel, labels, paths, and venue stack display
🖥️ Interface & Visual Design
The interface is built for quick market reading.
The panel provides compact state information.
The premium stack shows the current venue relationship without using pale or white primary visuals, preserving readability on both dark and light chart backgrounds.
Labels are designed to be visible, premium, and not buried inside candles.
🧪 Practical Usage Workflow
1. Confirm that the venue symbols match the active chart asset.
2. Read the panel state and score.
3. Check whether the active chart is premium, discount, aligned, or mismatched.
4. Inspect the strongest and weakest venue labels.
5. Use the premium and dispersion paths to understand whether the relationship is widening or normalizing.
🔍 Interpretation Guidelines
A venue premium does not automatically mean price must fall.
A venue discount does not automatically mean price must rise.
Spread expansion means exchange prices are becoming less aligned.
Exchange alignment means the active venue is closer to the basket.
The script should be read as market context, not as a buy or sell system.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an arbitrage execution tool.
It is not an auto-trading system.
It does not guarantee that premiums, discounts, or spreads will normalize.
⚠️ Limitations & Transparency
Cross-exchange readings depend on symbol quality, venue availability, quote currency differences, and PulseWire data access.
USD and USDT references may behave slightly differently.
Low-liquidity assets can produce unstable readings.
Timeframe differences and exchange data behavior can affect how states appear.
🧠 Market Context Notes
Crypto markets are fragmented.
The same asset can trade differently across exchanges because of liquidity, regional flow, quote currency differences, venue-specific demand, and execution conditions.
This script attempts to make that fragmentation easier to see.
🧾 Use Case Examples
When the active chart trades above the basket while dispersion expands, the market may be showing venue-specific premium pressure.
When the active chart trades below the basket while dispersion expands, the market may be showing local venue weakness.
When premium and dispersion compress together, the market may be returning toward exchange alignment.
🧱 System Philosophy
Cross Exchange Premium Drift Map follows the AGProLabs design principle of building decision-support maps rather than prediction tools.
The goal is to improve context, visual structure, and trader awareness.
🔐 Non-Promise Statement
No signal in this script guarantees a future price move.
No premium or discount reading guarantees convergence.
All outputs require broader market interpretation.
📉 Risk Disclosure
Trading involves risk.
Users are fully responsible for their own decisions.
This script does not provide financial advice, investment advice, or guaranteed trading outcomes.
📚 Educational Note
This tool is designed for educational and analytical use. It helps traders study cross-exchange price behavior, venue alignment, and premium drift as part of a broader market structure workflow.
Indicator
Pymander's MA SuitePymander's MA Suite is a versatile and all-in-one toolkit designed to give you total control over your trend analysis. Whether you’re a scalper looking for quick crossovers or a swing trader tracking long-term trends, this suite is built to be the only moving average indicator you’ll ever need.
What makes it unique?
Unlike standard MA ribbons that lock you into one type of calculation, EZ MA Suite gives you 5 fully independent slots. You can mix and match different lengths, sources, and—most importantly—12 different MA types in a single indicator. We’ve also cleaned up the visuals with "premium" signal placement and modern icons so your chart stays professional and clutter-free.
The Powerhouse MA Selection
You have access to a massive library of moving averages to fit any strategy:
The Classics: SMA, EMA, WMA, RMA, VWMA.
The Smooth & Fast: HMA (Hull), ALMA (Arnaud Legoux), and LSMA (Least Squares).
The Lag-Killers: DEMA (Double), TEMA (Triple), and ZLEMA (Zero Lag).
The Adaptive: KAMA (Kaufman), which adjusts itself based on market noise!
Stay on the Right Side of the Move
We’ve integrated a smart Buy/Sell Signal engine based on crossovers. You simply pick which of your 5 MAs is the "Fast" one and which is the "Slow" one.
But here’s the game-changer: The Trend Filter.
To help you avoid "choppy" fakeouts, you can enable a trend filter using a third MA (like a 200 SMA). When active, the suite will only show Buy signals if you're in an uptrend and Sell signals if you're in a downtrend. It’s all about keeping you aligned with the "big money" flow!
💬 We want to hear from you!
I built this to make our trading lives easier, but I’d love to know how you’re using it. Do you have a favorite MA combination? Is there a specific feature you’d like to see next? Drop your feedback and let’s keep improving this suite together!
Wishing you all lots of luck and many, many green days!!
— Pymander Indicator
Indicator
Indicator
EduVest - IFA-VP Context v3.0 [NEON Edition]📊 IFA-VP Context v3.0
A powerful market context indicator combining Volume Profile analysis with SMA trend detection. Designed with a cyberpunk-inspired NEON color palette for maximum visibility on dark charts.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 WHAT IT DOES
This indicator helps you understand "where you are" in the market by analyzing:
• Volume Profile (POC, VAH, VAL)
• SMA Alignment (20/50/200)
• Context Score (0-100)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚡ KEY FEATURES
🔹 NEON Color Palette - Cyan/Pink/Gold colors optimized for dark mode
🔹 Context Score - Visual score bar (████████░░) shows market strength
🔹 Cross Signals - GOLDEN CROSS / DEATH CROSS with HUGE labels
🔹 POC Reaction - Track price interaction with Point of Control
🔹 Status Panel - All-in-one dashboard with trend, zone, and hints
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📺 THREE DISPLAY MODES
• Impact Mode - Full visual experience with badges, ribbons, and glow effects
• Minimal Mode - Clean SMA lines and VP levels only
• Pro Mode - Complete VP histogram display
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📈 SIGNALS EXPLAINED
▲ GOLDEN CROSS (20×50) - Short-term bullish momentum
▼ DEATH CROSS (20×50) - Short-term bearish momentum
⭐ MAJOR GOLDEN (50×200) - Long-term bull market signal
💥 MAJOR DEATH (50×200) - Long-term bear market signal
Context Badges:
⚡ SUPER BUY/SELL (Score 80+)
🔥 POWER BUY/SELL (Score 70-79)
💪 STRONG BUY/SELL (Score 60-69)
⏸ WAIT (Score <50)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⏰ RECOMMENDED TIMEFRAMES
✅ 15min - 4H (Best for day trading & swing)
⚠️ 1min-5min (Noisy, use with caution)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
This is NOT a buy/sell signal indicator.
It shows market CONTEXT to help your own trading decisions.
Always use proper risk management and combine with your own analysis.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🏷️ Tags: volume profile, sma, context, trend, neon, dark mode, poc, value area
Indicator
Indicator
Indicator
Multi SMA AnalyzerMulti SMA Analyzer with Custom SMA Table & Advanced Session Logic
A feature-rich SMA analysis suite for traders, offering up to 7 configurable SMAs, in-depth trend detection, real-time table, and true session-aware calculations.
Ideal for those who want to combine intraday, swing, and higher-timeframe trend analysis with maximum chart flexibility.
Key Features
📊 Multi-SMA Overlay
- 7 SMAs (default: 5, 20, 50, 100, 200, 21, 34)—individually configurable (period, source, color, line style)
- Show/hide each SMA, custom line style (solid, stepline, circles), and color logic
- Dynamic color: full opacity above SMA, reduced when below
⏰ Session-Aware SMAs
- Each SMA can be calculated using only user-defined session hours/days/timezone
- “Ignore extended hours” option for accurate intraday trend
📋 Smart Data Table
- Live SMA values, % distance from price, and directional arrows (↑/↓/→)
- Bull/Bear/Sideways trend classification
- Custom table position, size, colors, transparency
- Table can run on chart or custom (higher) timeframe for multi-TF analysis
🎯 Golden/Death Cross Detection
- Flexible crossover engine: select any two from (5, 10, 20, 50, 100, 200) for fast/slow SMA cross signals
- Plots icons (★ Golden, 💀 Death), optional crossover labels with custom size/colors
🏷️ SMA Labels
- Optional on-chart SMA period labels
- Custom placement (above/below/on line), size, color, offset
🚨 Signal & Trend Engine
- Bull/Bear/Sideways logic: price vs. multiple SMAs (not just one pair)
- Volume spike detection (2x 20-period SMA)
- Bullish engulfing candlestick detection
- All signals can use chart or custom table timeframe
🎨 Visual Customization
- Dynamic background color (Bull: green, Bear: red, Neutral: gray)
- Every visual aspect is customizable: label/table colors, transparency, size, position
🔔 Built-in Alerts
- Crossovers (SMA20/50, Golden/Death)
- Bull trend, volume spikes, engulfing pattern—all alert-ready
How It Works
- Session Filtering:
- SMAs can be set to count only bars from your chosen market session, for true intraday/trading-hour signals
Dynamic Table & Signals:
- Table and all signal logic run on your selected chart or custom timeframe
Flexible Crossover:
- Choose any pair (5, 10, 20, 50, 100, 200) for cross detection—SMA 10 is available for crossover even if not shown as an SMA line
Everything is modular:
- Toggle features, set visuals, and alerts to your workflow
🚨 How to Use Alerts
- All key signals (crossovers, trend shifts, volume spikes, engulfing patterns) are available as alert conditions.
To enable:
- Click the “Alerts” (clock) icon at the top of PulseWire.
- Select your desired signal (e.g., “Golden Cross”) from the condition dropdown.
- Set your alert preferences and create the alert.
- Now, you’ll get notified automatically whenever a signal occurs!
Perfect For
- Multi-timeframe and swing traders seeking higher timeframe SMA confirmation
- Intraday traders who want to ignore pre/post-market data
- Anyone wanting a modern, powerful, fully customizable multi-SMA overlay
// P.S: Experiment with Golden Cross where Fast SMA is 5 and Slow SMA is 20.
// Set custom timeframe for 4 hr while monitoring your chart on 15 min time frame.
// Enable Background Color and Use Table Timeframe for Background.
// Uncheck Pine labels in Style tab.
Clean, open-source, and loaded with pro features—enjoy!
Like, share, and let me know if you'd like any new features added. Indicator
Indicator
Indicator
Indicator
MicuRobert EMA Cross StrategyThis is a repost of a old strategy that cant be updated anymore, it was a request for a user made in Oct, 6, 2015
Here's a possible engaging description for the pulsewire script:
**MicuRobert EMA Cross V2: A Powerful Trading Strategy**
Join the ranks of successful traders with this advanced strategy, designed to help you profit from market trends. The MicuRobert EMA Cross V2 combines two essential indicators - Exponential Moving Average (EMA) and Divergence EMA (DEMA) - to generate buy and sell signals.
**Key Features:**
* **Trading Session Filter**: Only trade during your preferred session, ensuring you're in sync with market conditions.
* **Trailing Stop**: Automatically adjust stop-loss levels to lock in profits or limit losses.
* **Customizable Trade Size**: Set the size of each trade based on your risk tolerance and trading goals.
**How it Works:**
The script uses two EMAs (5-period and 34-period) to identify trends. When the shorter EMA crosses above the longer one, a buy signal is generated. Conversely, when the shorter EMA falls below the longer one, a sell signal is triggered. The strategy also incorporates divergence analysis between price action and the EMAs.
**Visual Aids:**
* **EMA Plots**: Visualize the two EMAs on your chart to gauge market momentum.
* **Buy/Sell Signals**: See when buy or sell signals are generated, along with their corresponding entry prices.
* **Trailing Stop Lines**: Monitor stop-loss levels as they adjust based on price action.
**Get Started:**
Download this script and start trading like a pro! With its robust features and customizable settings, the MicuRobert EMA Cross V2 is an excellent addition to any trader's arsenal.
~Llama3 Strategy
Indicator
Key Levels SetKey Levels Set allows to set key levels as comma separated values, and to detect breaks to the downside and/or upside, taking into account potential gaps between bars.
This indicator can be very handy if you, like me, rely on some key levels that you identified as potential support/resistance from some technical analysis.
Features
+ It allows for key levels to be set as comma separated values.
+ It draws key levels on chart.
+ On close, it identifies highest key level that has been broken to the upside, if any.
+ On close, it identifies lowest key level that has been broken to the downside, if any.
+ In Cross mode, as bar is printing, it also detects highest/lowest key levels being broken to the upside/downside between bar high and low, if any.
+ It plots and labels breaks with current level and next level information.
+ It includes alerts from breaks on close.
+ It includes turn on/off functionality.
Settings
+ {Prices} checkbox: turns on/off entire functionality
+ {Prices} text field: comma separated values for key levels
+ {Breaks on} checkbox: turns on/off breaks detection functionality
+ {Breaks on} options: selects Close or Cross mode Indicator
Price Cross Time Custom Range Interactive█ OVERVIEW
This indicator was a time-based indicator and intended as educational purpose only based on pine script v5 functions for ta.cross() , ta.crossover() and ta.crossunder() .
I realised that there is some overlap price with the cross functions, hence I integrate them into Custom Range Interactive with value variance and overlap displayed into table.
This was my submission for Pinefest #1 , I decided to share this as public, I may accidentally delete this as long as i keep as private.
█ INSPIRATION
Inspired by design, code and usage of CAGR. Basic usage of custom range / interactive, pretty much explained here . Credits to PulseWire.
█ FEATURES
1. Custom Range Interactive
2. Label can be resize and change color.
3. Label show tooltip for price and time.
4. Label can be offset to improve readability.
5. Table can show price variance when any cross is true.
6. Table can show overlap if found crosss is overlap either with crossover and crossunder.
7. Table text color automatically change based on chart background (light / dark mode).
8. Source 2 is drawn as straight line, while Source 1 will draw as label either above line for crossover, below line for crossunder and marked 'X' if crossing with Source 2's line.
9. Cross 'X' label can be offset to improve readability.
10. Both Source 1 and Source 2 can select Open, Close, High and Low, which can be displayed into table.
█ LIMITATIONS
1. Table is limited to intraday timeframe only as time format is not accurate for daily timeframe and above. Example daily timeframe will give result less 1 day from actual date.
2. I did not include other sources such external source or any built in sources such as hl2, hlc3, ohlc4 and hlcc4.
█ CODE EXPLAINATION
I pretty much create custom function with method which returns tuple value.
method crossVariant(float price = na, chart.point ref = na) =>
cross = ta.cross( price, ref.price)
over = ta.crossover( price, ref.price)
under = ta.crossunder(price, ref.price)
Unfortunately, I unable make the labels into array which i plan to return string value by getting the text value from array label, hence i use label.all and add incremental int value as reference.
series label labelCross = na, labelCross.delete()
var int num = 0
if over
num += 1
labelCross := label.new()
if under
num += 1
labelCross := label.new()
if cross
num += 1
labelCross := label.new()
I realised cross value can be overlap with crossover and crossunder, hence I add bool to enable force overlap and add additional bools.
series label labelCross = na, labelCross.delete()
var int num = 0
if forceOverlap
if over
num += 1
labelCross := label.new()
if under
num += 1
labelCross := label.new()
if cross
num += 1
labelCross := label.new()
else
if cross and over
num += 1
labelCross := label.new()
if cross and under
num += 1
labelCross := label.new()
if cross and not over and not under
num += 1
labelCross := label.new()
█ USAGE / EXAMPLES
Indicator
Multi-Symbol Cross Indicator Template - Unleash Your Potential!Unlock your full trading potential with this powerful and versatile Multi-Symbol Cross Indicator Template! This script is designed to make you stand out from the crowd by enabling you to monitor multiple symbols on a single chart for specific events, such as a Golden Cross or Death Cross. With its high adaptability to include various technical indicators, you're in complete control of your trading decisions and market analysis.
By using the built-in request.security function, this template fetches data for your chosen symbols from the selected exchange and calculates the conditions (e.g., moving average crossovers) for each symbol. Although the current implementation focuses on Golden Crosses and Death Crosses, the sky is the limit when it comes to modifying the script to incorporate other technical indicators such as RSI, MACD, or Bollinger Bands.
You, as a discerning trader, can easily customize the script by selecting your preferred exchange and symbols through input options. This flexibility allows you to monitor your favorite markets without the need for any direct code modification, giving you the ultimate adaptability for various trading strategies and market analysis purposes.
Remember, this script is more than just an example or template; it's the key to unleashing your inner trading genius. While it's not intended to be a standalone trading strategy, it serves as the foundation for you to build upon and create your own customized multi-symbol indicators or strategies. You are awesome, and with this Multi-Symbol Cross Indicator Template, there's no doubt that you're on the path to achieving great success in your trading journey! Indicator
Indicator
Indicator
Indicator
Indicator
