Multi-Timeframe Trend & Consolidation Table### Overview
The **Multi-Timeframe Trend & Consolidation Table** is a lightweight dashboard indicator designed to give traders a quick, multi-timeframe overview of the market trend and consolidation status directly on their chart.
Instead of switching between multiple timeframes or cluttering your chart with dozens of moving averages, this tool consolidates trend data across 10 different timeframes into a clean, customizable table.
---
### Key Features
* **Multi-Timeframe Analysis:** Monitors **1m, 3m, 5m, 10m, 15m, 1h, 4h, 1D, 1W, and 1M** timeframes simultaneously.
* **Customizable EMA Periods:** Set unique Exponential Moving Average (EMA) lengths for every individual timeframe (e.g., EMA 10 for 1m, EMA 50 for 1h, EMA 200 for 1D).
* **Consolidation Detection:** Built-in threshold logic identifies when price is hovering extremely close to the EMA line, signaling potential range-bound/chop market conditions.
* **Dynamic Table UI:** Displays the specific EMA length assigned to each timeframe directly inside the table for clear tracking. Fully customizable position (Top Right, Bottom Left, etc.) and text sizes.
---
### How It Works
The indicator compares the price of each timeframe against its assigned EMA line:
1. **BULLISH 🟢:** Current close price is above the timeframe's EMA (outside the consolidation zone).
2. **BEARISH 🔴:** Current close price is below the timeframe's EMA (outside the consolidation zone).
3. **RANGE 🟡:** Price percentage difference from the EMA is smaller than the set threshold (e.g., within 0.15%), indicating market consolidation or flat movement.
---
### How to Use
1. **Trend Alignment:** Look for timeframes aligning in the same direction (e.g., 1h, 4h, and 1D all green) to trade with the macro trend.
2. **Avoiding Chop:** When lower timeframes show `RANGE 🟡`, it indicates low volatility or moving average compression, warning you to avoid breakout trades or wait for confirmation.
3. **Execution Timeframes:** Tune lower timeframes (1m, 3m, 5m) to fast EMAs for scalp setups, while keeping higher timeframes (1D, 1W) on key levels like the 200 EMA.
---
### Settings & Inputs
* **EMA Lengths per Timeframe:** Set custom EMA periods for all 10 available timeframes.
* **Enable Consolidation Detection:** Toggle range detection on or off based on your strategy preference.
* **Consolidation Threshold (%):** Adjust the distance percentage between close price and EMA to define a range zone (default is 0.15%).
* **Table Display:** Adjust table placement on your screen and text font size. Indicator
Compression Breakout & Follow-Through Scoring [SlatinaTrades]🌀 Compression Breakout & Follow-Through Scoring — grades the coil, then checks its own homework.
Most squeeze/compression tools flag a tight range and stop there. This one also tracks what happens after the break — and separates completed setups by quartile to show whether the coil's tightness or the breakout candle's quality actually predicted the outcome, instead of assuming either one does.
THE MECHANICS
🧊 Compression detection — three conditions have to hold together: box range ≤ a multiple of base-ATR (C1), Bollinger Band width inside a squeeze percentile (C2), and a minimum dwell in confirmed bars (C3). All three gate the coil; none of them alone is enough.
🔒 State machine — COILING → PRIMED → BREAKOUT (up/down) → HELD or FAILED, with EXPIRED for coils that age out unbroken. The box freezes on arm (tighten-only re-lock while PRIMED — it can tighten further, never widen), so what you see is a committed level, not a moving target.
📊 Tightness score (0–100) — weighted blend of C1 margin, C2 depth, and dwell length. Grades how genuine the compression is, not just whether it cleared a threshold.
🎯 Break-quality score (0–100) — weighted blend of close location, body ratio, range expansion vs ATR14, and where volatility sits inside a regime band (mid-band scores highest; dead or chaotic extremes score low).
📈 Follow-through score (0–100) — tracks maximum favorable excursion beyond the broken edge over a fixed window, capped at a set ATR multiple. A break that reclaims the level before the window closes is scored FAILED instead.
SEPARATION HARNESS — the honesty check
A stats table bins every completed setup (HELD or FAILED) into quartiles two ways: by tightness score and by break-quality score. Each quartile reports mean follow-through in ATR units and reclaim rate. If a score's Q4 looks like its Q1, that score isn't doing the work it claims to — the table shows you that plainly instead of asking you to trust a single headline number.
NON-REPAINT
Every state transition and every follow-through update runs on barstate.isconfirmed. The box freezes the moment a coil arms. The optional HTF alignment read uses a closed-bar offset (lookahead_on + gaps_off on ) and is a flag only — it never gates the state machine.
WHAT IT IS NOT
Not a strategy. No entries, no stops, no targets, no risk sizing anywhere in this script. Bidirectional context only — it tells you a coil compressed and how the break resolved, not what to do about it. Settings are starting points, not recommendations; tune box length, dwell, and weights to what you're trading and validate before risking anything on it.
ALERTS
New Coil Primed · Bull Breakout · Bear Breakout · Follow-Through Confirmed · Reclaim. All gated to confirmed bars, all carry numeric state/score payloads for automation.
Still useful after it's been on your chart a while — every read maps to a concrete decision about whether this coil is worth watching. Indicator
STRX - Balance RangeSTRX - Balance Range is a price-structure indicator designed to identify and track balanced trading ranges directly on the chart.
It detects periods of compression by comparing the recent price box width to ATR-based volatility, then validates the structure using persistence, edge interaction, and price position inside the range.
The script draws historical range boxes, can optionally connect consecutive ranges, and includes a compact statistics table showing the last closed range, the average of the last 10 ranges, and the average of the last 100 ranges.
This makes it useful for traders who want to study how current balance conditions compare with recent and broader market structure.
How it works:
A reference range is built from the highest high and lowest low of the previous lookback window.
The range is accepted only when its width remains compressed relative to ATR and the current price continues to behave inside that structure.
Additional filters help reduce random consolidations by requiring repeated interaction with the range boundaries and a minimum confirmation period.
How to use it:
Use the boxes to locate areas where price is rotating in balance rather than expanding directionally.
Compare the latest closed range with the 10-range and 100-range averages to judge whether current balance conditions are relatively small, typical, or expanded.
The tool is designed for structure reading and contextual analysis, not as a standalone buy/sell signal generator.
Inputs overview:
Range Length controls how many bars are used to define the reference box.
ATR Length and ATR Multiplier control how strict the volatility compression filter is.
Center Distance, Edge Touches, and Confirmation Bars refine the quality of detected ranges.
Visual options allow you to show or hide historical boxes, range markers, connection lines, and the statistics table.
Notes:
The statistics table uses closed historical ranges, so the values remain stable and easier to compare.
This indicator is intended for standard chart types and discretionary structure analysis.
It does not guarantee future performance and should be used together with your own risk management and market context reading.
Indicator
Zone Radar [DefinedEdge]Price spends most of its time going nowhere. Zone Radar finds those stretches automatically, draws the range while it's still forming, and tells you the moment it breaks and how hard.
🎯 What it does
Zone Radar watches for price coiling inside a bounded range. When a genuine consolidation forms, it marks the zone with its support and resistance, then tracks it live. The instant price closes decisively outside the range, it flags the break and scores its strength from 0 to 100. Strong breaks get a bold label and a projected target.
It is a context and breakout tool, not a signal service. It shows you where the market is compressed and when that compression releases. What you do with that read is yours.
🧭 How a zone is found
A range only qualifies when two things are true at once:
Price stays inside an ATR normalised band for a minimum number of bars, so the width adapts to any symbol or timeframe on its own.
Price does not drift across that band from one side to the other, which filters out slow trends pretending to be ranges.
Once a zone is confirmed the box breathes to hug the real range, but it is capped at the width it formed with. That cap is what makes a breakout meaningful: a close beyond it is a true expansion out of compression, not just another bar inside the noise.
💥 Break strength (0 to 100)
Every break is graded on four things that separate a real breakout from a fake one:
Displacement how far beyond the edge it closed, in ATR
Range expansion the break bar's range against its recent average
Volume surge participation on the break (auto adjusted on symbols with no volume data, like spot FX)
Coil quality how long and tight the range was, since a longer coil breaks harder
Breaks at or above your Strong threshold get the bold badge plus a measured move target: the height of the range projected from the breakout point. Broken edges stay on the chart as polarity support and resistance for the retest.
⚙️ Under The Hood
Signals fire on the close of the breakout bar. No repainting, ever.
Fully adjustable: range length, width, break sensitivity, strength threshold, and how much history stays on the chart.
Works on any market and any timeframe. Tuned nicely for intraday out of the box.
🔔 Alerts
Zone formed, break up, break down, strong break up, strong break down. Wire any of them into your workflow.
📝 Notes
Lower timeframes produce far more zones than higher ones, so only the most recent are kept drawn to stay within platform limits. Raise the zone cap if you want more history, or drop to a higher timeframe for a cleaner chart. The ATR based settings are a starting point, not gospel. Tune them to how your instrument actually moves. Indicator
TL Space Concept Pro - Three Finger Spread Breakout EngineSPACE CONCEPT PRO - THE THREE-FINGER SPREAD ENGINE
Some of the most consistent discretionary traders never look at a chart without two moving averages on it: the 20 SMA and the 200 SMA. Add price itself and you have THREE ITEMS - three "fingers". The distance between them is called SPACE, and space tells you when a market is about to explode and when a move is about to die. This indicator turns that entire concept into a fully mechanical engine with signals, trade management and webhook automation.
=== THE CONCEPT ===
THE THREE ITEMS
1. Price
2. The 20 period simple moving average
3. The 200 period simple moving average
NARROW STATE - all three items clustered together. The market has reset itself. An explosive move is loading, direction unknown. You do not need to predict it: you simply wait for the biggest bar to emerge.
SPACE ZONE 1 - the space between the 20 SMA and the 200 SMA.
SPACE ZONE 2 - price accelerating away from the 20 SMA. Sometimes the underlying moves faster than the moving average can keep up, creating a second layer of space.
DUAL SPACE / THREE-FINGER SPREAD - both zones open at the same time, all three fingers clearly separated and stacked in order. This is where moves get exhausted.
THE RAILROAD RULE - if price runs parallel to the 20 SMA like railroad tracks, that is NOT a spread. Price has to ACCELERATE away from the moving average. The engine checks this automatically.
THE WIDEST SPREAD - the widest three-finger spread of the lookback window finds you the temporary top or bottom 8 to 9 times out of 10. When it prints, the reversal watch arms and the extreme that must hold is marked on the chart.
NARROW TO NARROW - when the spread collapses from the widest state back to narrow WITHOUT breaking the extreme, the next direction is the reversal. Confirmed by a power bar: a three-finger spread reversing with a power bar is the creme de la creme of this method.
=== THE SIGNALS ===
1. BREAKOUT - power bar (biggest bar of the window) exploding out of a narrow state. Entry inside the bar, stop beyond the bar.
2. SPREAD REVERSAL - widest spread found the extreme, spread collapsed back toward narrow without breaking it, power bar confirms. Target follows the 50 percent rule.
3. EARLY REVERSAL - first strong color change directly at the widest spread (the bottoming tail bar play). Stop beyond the extreme.
4. TAIL BAR - optional: bottoming/topping tail bars near narrow states as early entries (markers by default).
Every signal prints as a two-line pill with the setup name, and every pill carries a WHY tooltip that explains the exact chain of logic behind the trade - plus entry, stop, target and R:R.
=== TRADE MANAGEMENT (AS TAUGHT) ===
- ADD on the first color change after entry ("always adding on the first color change")
- TP at the 50 percent mark of the move - the pros are satisfied with the halfway mark, do not get greedy
- After the partial: bar-by-bar trailing stop until the market takes you out
- Hard stop beyond the power bar / spread extreme with an ATR buffer
- Full position box and live status in the cockpit panel
=== THE COCKPIT ===
An animated terminal-style panel shows everything at a glance:
- Animated 3D gold pixel logo with a moving light sweep (live ticks)
- State chip: NARROW STATE / 3-FINGER SPREAD / WIDEST SPREAD / REVERSAL WATCH
- Spread rank 0-100 plus live ZONE 1 / ZONE 2 meter bars in ATR
- 7-step SPACE CHECKLIST mirroring the method: items stacked, zone 1, zone 2, acceleration (railroad filter), widest-spread watch, power bar, management
- Position box, big signal line, spread/reset/signal counters
On the chart: shaded zone 1 and zone 2 fills, narrow-state boxes, MARKET RESET tags, 3-FINGER SPREAD labels, gold WIDEST SPREAD stars with vertical measuring lines (exactly how it is drawn when taught), the must-hold extreme line, TAIL tags and lightning power-bar markers. Everything is explained on the chart - hover any label for the reasoning.
=== AUTOMATION / WEBHOOK ===
Create ONE alert with condition "Any alert() function call" and paste your webhook URL. The indicator sends ready-to-use JSON for every event:
{"id":"TL-SPACE-CONCEPT","symbol":"BTCUSD","action":"BUY","setup":"BREAKOUT","price":64100.5,"sl":63900.0,"tp":64500.0,"tf":"15","time":"2026-07-18 16:30"}
Actions: BUY, SELL, ADD, TP_50, TRAIL_EXIT, SL_HIT, NARROW_STATE, WIDEST_SPREAD. Classic alertconditions for BUY / SELL / Narrow State / Widest Spread are included as well.
=== SELF-CALIBRATING ===
The spread is ranked against its own history (percentile engine) and all distances are measured in ATR - so the indicator works out of the box on any market (crypto, forex, gold, indices, stocks, futures) and any timeframe from 1 minute to weekly. Practice finding three-finger spreads everywhere - that is the homework.
=== SETTINGS ===
Every input is documented with a tooltip quoting the original rule it implements. Adjust the narrow/wide percentiles, power-bar size, dual-space minimum, acceleration window, 50 percent rule targets and the SL buffer to fit your market and style.
=== DISCLAIMER ===
Educational tool, not financial advice. No indicator wins every trade - prepare for the 1-2 times out of 10 the concept is wrong: keep your risk unit small compared to your profit unit. That is how you stay in business.
Indicator
Indicator
Friction Map [NovaLens]Friction Map reads price structure the way a floor trader reads a room: it finds the price shelves where the market actually spent time, marks which ones are still live versus which the market has abandoned, and measures how much clear air you have to the nearest live shelf in each direction. It is a map of where structure is, how alive it is, and where the open space sits - not a buy or sell signal.
Most support/resistance tools draw static lines and leave them there forever, so the chart fills with levels that stopped mattering 300 bars ago. Friction Map keeps the same structure honest over time: every shelf carries a freshness that decays once the market stops trading at it, so the orange (live) shelves are the ones price has interacted with recently and the gray (fading) ones visibly age out.
═════════════════════════════════════════
◈ HOW TO READ IT
Friction Map draws directly on the price chart. There are two views of the same structure.
The shelves.
Orange = LIVE - price traded here recently; this is the current structure context.
Gray = FADING - price has not returned in a while; the market has moved on and the shelf dims the longer it stays untouched.
Faint dotted = BROKEN - price closed through it; an x-cross marks the exact bar it failed, and the dotted tail is kept so you can still see it existed.
KEY LEVEL - the strongest live shelf on the map (boldest line, brightest tag). The eye's anchor.
The room boxes. On the right edge, a box runs from current price to the nearest LIVE shelf above and below, with a label that reads the distance as a near-to-far range in ATR, for example "1 to 2.1 ATR" - meaning roughly 1 ATR of clear air, then the shelf running out to 2.1 ATR. ATR units make the read comparable on any symbol and timeframe. Teal means clear room; orange means a live shelf sits within about 1 ATR. When there is no live shelf in a direction the label reads "open air".
The breakout badge. On a confirmed close that breaks the recent range, and only at the extremes, the map prints a one-word context badge: CLEAR RUNWAY when there is no live shelf within the runway band ahead, or WALLED (with the distance) when a live shelf stands within about 1 ATR of the path. Only one CLEAR RUNWAY prints per clear-air leg - no repeats while price keeps running in the same open space, and it resets once price pulls back into a shelf. It is breakout context, never a direction call.
The info panel. A compact info panel compiles the read: the structure memory in bars; Room above and Room below as ATR ranges; Price now (open air, on a live shelf, or on a fading shelf); Last breakout (the most recent badge and how many bars ago); Shelves (how many live versus fading); and a one-line Reading takeaway.
The two views (Level view).
Anchored (default): each shelf line starts at its origin diamond, shows its current live (orange) / fading (gray) state from that origin, and marks the x-cross where it broke. An anchored structure story - where structure formed, how it reads now, and where it broke if broken - not a full per-era ledger.
Zones : every live shelf drawn as a clean full-width band straight across the chart, like a supply/demand map. Instant "where are my levels right now". No origin/break markers; broken shelves drop off.
═════════════════════════════════════════
◉ HOW IT WORKS
The density field. Across the lookback window, the indicator measures how often each price level sat inside the high-low range of the lookback bars - a time-at-price-style structure read. For every bar it asks which price levels the bar's high-low range covered, and accumulates that into a density field using a difference-array method (O(L+bins) per bar) so the script stays fast even on long charts and heavy lookbacks. Price levels where many bars overlapped are dense; levels price passed through quickly are thin.
Where shelves are born. A shelf forms at a density peak whose strength clears a RELATIVE floor - it must be at least a set fraction of the strongest peak currently on the map. That relative test is self-calibrating: it adapts to each asset and regime instead of relying on a fixed tick count, so the same indicator is designed to read BTC, SPY, EURUSD and gold without constant retuning. A small absolute floor screens out noise on near-empty windows.
Data-driven width. Each shelf's band is not a fixed width. It expands outward from the peak for as long as the neighbouring density holds at least half the peak value, then is capped to a readable range in ATR units. A wide consolidation earns a wide shelf; a tight one stays thin.
Aliveness (freshness). Every shelf carries a freshness equal to an exponential decay of the bars since the band was last traded (2^(-barsSinceTouch / halfLife)). Freshness is 1 while price is in the band and halves every half-life once price leaves. Above the live threshold a shelf renders LIVE (orange); below it the shelf renders FADING (gray) and dims further until it drops off the map.
Causal lifecycle. Shelves are born on confirmed bars and never re-placed. A shelf becomes BROKEN only when price, after arming on one side with real separation, closes through to the other side - the break bar is frozen and the line continues as a faint dotted tail. The ORIGIN anchor (the earliest bar within the lookback where price actually traded that level) and the BREAK anchor are both set once and never rewritten. That frozen history is the trust element: the map cannot quietly redraw the past to look right.
═════════════════════════════════════════
✦ HOW WE USE IT
A common read on a liquid crypto or index chart, default memory: price is pushing toward the top of its recent range. The panel Room above reads "0.4 to 1.6 ATR" in orange - there is a live shelf close overhead, so the map reads the upside as walled in the near term. Room below reads "open air" - nothing live underneath. Price is sitting in open air between an overhead live shelf and abandoned structure far below.
Now price closes through the recent high. Because the nearest live shelf overhead was inside the runway band, the map prints WALLED with the distance, not CLEAR RUNWAY - the break is into immediate structure, not open space. The badge does not say the break fails; it says there is a live shelf standing in the path, which is the context a discretionary trader wants before deciding whether the move has room.
Flip the situation: a confirmed break with Room ahead reading "open air" prints CLEAR RUNWAY . In our testing, clear-runway breakouts travelled further on average than walled ones (the effect was modest and weakest on rates). That is an observation about context, not a guarantee about the next bar.
The point of the map is the same in every case: see where the live structure is, see how much clear air you have to it in ATR, and read the breakout against that structure instead of against a static line.
═════════════════════════════════════════
❖ OTHER APPLICATIONS
Trade-location context : read entries against the nearest live shelf rather than a static S/R line - the orange shelves are the structure price has interacted with most recently.
Breakout context : CLEAR RUNWAY versus WALLED on a confirmed break, as a read on whether there is open space ahead or a live shelf in the path.
Stop and target context : the room ranges in ATR give a structure-aware sense of where the nearest live shelves sit above and below, for evaluating whether planned stops or targets sit near recent structure or out in open air, instead of at round numbers.
Chop filter : many overlapping live shelves with price standing on one ("on a live shelf" in the panel) is a congested read; sustained open air is cleaner trend space.
Structure classifier : use the Shelves row (live versus fading) and Room rows as a top-down structure filter for any external trade plan, independent of the badges.
Alert-driven workflow : subscribe to the clear-runway and walled breakout alerts and check the chart only when a confirmed breakout actually changes the structural picture.
═════════════════════════════════════════
⚙ GETTING STARTED
Friction Map ships with pre-tuned memory profiles plus a Custom override. Pick a memory and start reading the map - the default Auto setting matches the chart timeframe for you.
Structure memory:
Auto (match timeframe) (default): reads the chart - 30-minute and faster get Short, everything slower gets Medium.
Short (60 bars) : about one trading day on 5m, a week on 1H. Faster-moving map.
Medium (120 bars) : about a month on 1H, six months on 1D. Balanced.
Long (240 bars) : slow, full-cycle structure.
Custom : unlocks the Advanced group for full manual control.
Core display:
Level view : Anchored (causal story, default) or Zones (clean full-width bands).
Structure shelves : master toggle for the shelf lines. On by default. Under it, three per-state toggles let you choose which states draw:
Live shelves (orange) , Fading shelves (gray) , Broken shelves (dotted) - all on by default. Turn Broken off to declutter when a level has rebuilt live on top of old broken tails.
Room boxes + labels : the price-to-nearest-live-shelf boxes and ATR range labels. On by default.
Breakout badge : CLEAR RUNWAY / WALLED context badges on confirmed breakouts. On by default.
Shelf state tags : a small LIVE / FADING / KEY LEVEL tag at the right end of each shelf. On by default; turn off for a cleaner chart once the colours are familiar.
Show real shelf width : off by default (live shelves get a thin subtle halo). On draws each live shelf at its true data-driven width as a wider transparent band.
Info panel : pick where the summary panel anchors - Top Right (default), Top Left, Bottom Right, Bottom Left, Middle Right, or Off to hide it.
Dark theme panel : panel colours for dark charts; turn off on a light background.
Level reach (bars) : how far back the shelf lines and halos draw, so old structure does not stretch across the whole chart.
Appearance / Colours (4 pickers):
Live shelf, Fading shelf, Clear air, Broken shelf - each on its own line. The shelf lines, halos, room boxes, tags and badges all reference these inputs, so the palette adapts for colour-blind, light-mode or brand themes without forking the script.
Advanced (Memory = Custom only): Custom opens on the same defaults as the Medium profile (not a live copy of whichever profile you are currently on), so coming from Medium the switch is seamless; coming from Short or Long the map steps to that baseline first. Then every dial below is yours.
Lookback (bars) : structure memory in bars. Larger = more history considered, slower-moving map.
Freshness half-life : how fast a shelf fades once the market stops trading at it. After this many bars untouched a shelf is at half freshness.
Breakout lookback : a breakout is a confirmed close that newly breaks beyond the prior N-bar high or low (a fresh cross, so a sustained trend does not re-fire it every bar).
Min strength (vs strongest) : a shelf is born only if its density is at least this fraction of the strongest peak on the map. Raise for fewer, stronger shelves.
Merge distance (ATR) : shelf candidates closer than this to an existing shelf refresh it instead of spawning a duplicate.
Max shelves : cap on simultaneously tracked (non-broken) shelves; the weakest is pruned when a stronger one is born.
Live threshold : freshness above this renders a shelf LIVE (orange).
Runway band (ATR) : how far ahead of a breakout to scan for live shelves when deciding CLEAR RUNWAY versus WALLED.
═════════════════════════════════════════
△ LIMITATIONS
Descriptive, not predictive : Friction Map shows where price spent time and how alive that structure is. It makes no claim that a shelf will hold or that a breakout will follow through. There is no buy or sell signal anywhere in the tool.
Time-at-price, not volume : the density field is built from how much of the traded range sat at each level, not from volume. That keeps the read universally stable across every asset and data feed (crypto volume is fractured by exchange, FX volume is a tick proxy), but it does not weight a busy bar more than a quiet one.
Backward-looking by construction : in fast moves and gaps, room can jump to "open air" quickly as price leaps into untraded territory. That is accurate but may not persist.
Room measures to LIVE shelves only : the room ranges and the badge ignore fading shelves on purpose - the room read focuses on the current (orange) structure. A fading shelf still shows on the chart as a gray line; it just is not counted as room.
The breakout effect is context, not edge : in testing, clear-runway breakouts travelled further than walled ones on average, but the difference was modest and weakest on rates. Treat the badge as context to read alongside your own plan, not as a validated signal.
Recency fade : a structurally important level that has not been traded in a long time will fade from the map even if you still consider it important. Lengthen the memory or half-life if you want older structure to persist.
═════════════════════════════════════════
🔔 ALERTS
Two alert conditions are built in so you can monitor structure without watching every bar:
Clear-runway breakout : a confirmed breakout into clear air (no live shelf within the runway band ahead).
Walled breakout : a confirmed breakout into nearby live structure (a live shelf within about 1 ATR of the path).
Both fire on bar close (gated on `barstate.isconfirmed`) - no intrabar repaint. The indicator also emits a richer alert with a pure-JSON payload for routing to your own automation or webhook stack. The payload carries the brand, the indicator name, the event, the direction, the up and down clearance in ATR, the current price, the ticker, the timeframe and the bar time (the clearance fields are sent as text and read "open" when there is no live shelf that way). Pick ONE mechanism per event - the dropdown alert condition for a simple notification, or the JSON alert for a webhook - so you do not get duplicate notifications. Badges and alerts fire even when the on-chart badge is toggled off; alerts should not require chart clutter.
═════════════════════════════════════════
⌁ NOTES
Built on a containment-count density field (time-at-price), with data-driven band width, exponential freshness decay, and a causal frozen lifecycle (origin and break anchors set once and never moved).
Method lineage: the density field is a time-at-price construction, in the tradition of Market Profile (J. Peter Steidlmayer, popularised at the CBOT in the 1980s), which reads structure from where the market spent time rather than from volume. Friction Map adds the freshness decay and the causal live/fading/broken lifecycle on top of that classical time-at-price idea.
Repaint: non-repainting on confirmed bars. Births, breaks, clearance, badges and alerts are computed on bar close; the current bar updates in real time. Live/fading colour reflects current state, so a re-traded faded shelf can re-colour live - no past origin or break anchor is ever changed.
Original construction. The engine is built from first principles for this tool; there is no external reference implementation, so no validation-correlation claim is made.
Open-source under MPL 2.0. Free to use, fork, study.
NovaLens Indicator
EV Edge | AnonycryptousEV Edge | Anonycryptous
Description & user manual
Why this indicator is different;
Most breakout indicators stop at the entry. A box compresses, price breaks out, an arrow appears, and the indicator's job is considered done. What happens next - whether that breakout actually develops into a sustained move or stalls and reverses within a few bars - is left entirely to the trader to monitor manually.
EV Edge treats the moment of entry as the beginning of the analysis, not the end of it.
At its core is a consolidation detection engine that identifies tight, compressed ranges using an ATR-based threshold. When price breaks out of one of these ranges in the direction of the move that led into it - a continuation pattern sometimes described as the right side of a V - a signal fires. This part is familiar territory for breakout-based tools.
What happens afterward is not. Every signal starts with an EV score, a value between 0 and 100 that represents the expected value of the trade as it currently stands. The rule is simple: higher is better, lower is worse - for both long and short trades. A score climbing toward 100 means the trade is developing in your favor. A score falling toward 0 means price is moving against you. This holds regardless of direction. A short trade with an EV score of 85 is developing well. A long trade with an EV score of 12 is going the wrong way.
This score is not fixed at entry. It evolves on every subsequent bar based on how price actually behaves - how far it has moved in the trade's favor relative to ATR, and whether it has retraced back into the consolidation zone it broke from. A trade that continues cleanly in its intended direction sees its EV score climb toward 100. A trade that stalls or reverses back into the consolidation sees its score fall toward 0, with the penalty scaling proportionally to how deep the retracement goes.
The trade is then managed automatically by its own EV score. If the score reaches a configurable extreme - high or low - the trade closes out and the indicator becomes ready for the next signal. If neither extreme is reached within a maximum bar count, the trade times out. Every closed trade is recorded with its entry score, exit score, exit reason, and duration in an optional trade log table, turning the chart into a running record of how setups actually played out rather than a static history of where arrows appeared.
This is the central idea behind EV Edge: a signal is not a single judgment made once. It is a starting hypothesis that is continuously re-evaluated against what price does next.
A note on the colors
EV Edge uses two independent color systems that represent different things, and reading them correctly is essential.
The entry label color - the small triangle marker and its background - reflects trade direction. A long entry uses the bull color. A short entry uses the bear color. This is fixed at the moment of entry and never changes.
The trade zone box uses a separate, monochrome system that reflects how strongly the trade is currently developing, independent of direction. The box is a single configurable color throughout - by default a neutral steel grey - and only its intensity changes. Near the middle of the EV range the box is barely visible. As the EV score moves toward either extreme, the box becomes more opaque. The box answers one question only: how strong is the current reading, regardless of which way it points.
The EV score itself - shown as a number, a ten-segment meter, and a zone label in the dashboard - uses a four-zone color system based purely on score value, with no reference to trade direction:
90 to 100 : amber - the score is approaching the high exit threshold
60 to 90 : green (bull color) - the trade is developing favorably
40 to 60 : gold - neutral territory, no strong reading in either direction
10 to 40 : red (bear color) - the trade is developing poorly
0 to 10 : amber - the score is approaching the low exit threshold
This color system is direction-independent. A short trade with EV 85 shows green because the short is working well. A long trade with EV 14 shows red because the long is working against you. The amber zones at both extremes serve as a visual warning that an automatic exit is approaching, regardless of whether the trade is succeeding or failing. When no trade is active, the EV display is grey.
The text inside entry labels and EV shift labels is rendered in the measurement/brand color, against a background in the bull or bear color matching the trade direction. This keeps the label readable against either background while keeping the directional color as the dominant visual cue.
Important notice
EV Edge generates signals based on price action, volume behavior, and momentum confirmation.
These signals are not financial advice.
They do not predict future price movement.
They do not guarantee profitability.
All trading decisions are made entirely by the user.
Always manage your own risk. Always apply your own judgment.
1. Overview
EV Edge is a consolidation breakout indicator with a self-updating expected value score that tracks every trade from entry to close. It combines breakout detection, dynamic trade evaluation, optional momentum confirmation, multi-timeframe trend context, and a trade outcome log in a single lightweight indicator.
What it includes:
- Consolidation detection using ATR-based range compression
- Breakout signal with optional right-side-of-V continuation filter
- EV score from 0 to 100 that evolves bar by bar based on price drift and retracement depth
- Optional volume component blended into the EV score
- Four-zone color system on the EV score display: amber at the extremes, green in the favorable zone, gold at neutral, red in the unfavorable zone
- Automatic early exit when EV reaches a configurable extreme, with a hard bar-count cap as fallback
- Trade zone box that grows with the active trade and increases in opacity as EV moves away from neutral
- Extreme EV shift labels that appear only on significant single-bar changes or zone crossovers
- Optional VW RSI and MFI confirmation filter for entries, with an independent mini panel showing live values regardless of filter state
- Configurable divergence sensitivity for VW RSI divergence detection (High / Medium / Low)
- Multi-timeframe trend bar across six timeframes with a bull count
- Four independently toggleable EMA lines for visual confluence, with no effect on signals
- Trade log table recording direction, entry EV, exit EV, exit reason, and duration for recent trades
- Fully configurable bull, bear, and measurement colors applied consistently across labels, dashboards, and the trend bar
2. Core calculation
2.1 Consolidation detection
A consolidation range is measured over a configurable lookback period using the highest high and lowest low in that window. This range is compared against an ATR-based average range. When the actual range falls below the average range multiplied by a compression factor, the range is considered compressed. A consolidation is only confirmed once a minimum number of consecutive compressed bars has occurred - this is the V forming.
Lower compression factors demand tighter ranges before a consolidation is recognized. Higher minimum bar counts demand more mature consolidations. Both settings directly affect how often signals occur.
2.2 Breakout signal and the right side of the V
A breakout fires when price closes beyond the consolidation high or low by a configurable buffer, expressed as a multiple of ATR. With the right-side-of-V filter enabled, the breakout must also continue in the same direction as the move that occurred before the consolidation began. A consolidation that formed after an upward move and then breaks upward is a continuation. A consolidation that formed after an upward move and then breaks downward is not, and is ignored with this filter on.
Only one trade is tracked at a time. While a trade is active, new breakout signals are not evaluated. This keeps the chart from filling with overlapping signals and trade zone boxes during volatile, choppy conditions.
2.3 The EV score
Every new signal starts with an EV score of 60. From that point, the score updates on every bar based on two components.
The price component measures drift - how far price has moved in the trade's favor since entry, normalized by ATR - and retracement - whether price has moved back into or past the consolidation zone it broke from. Favorable drift increases the score. A retracement decreases it, and the size of the decrease scales with how deep the retracement goes. A shallow retracement back to the edge of the consolidation costs less than a retracement that pushes well past the original zone.
The optional volume component compares current volume to its moving average. Volume expanding in the direction of the trade supports the price component. Volume that is elevated while price is not moving - an effort without result condition - works against the score even if price has not yet retraced.
Both components are combined using configurable weights, and the result is applied to the running score each bar, clamped between 0 and 100.
2.4 Exits
A trade closes in one of two ways. If the EV score reaches a configurable extreme - high or low - after a minimum number of bars have passed, the trade closes immediately and the result is logged as an EV High or EV Low exit. The minimum bar requirement prevents the first bar or two after entry from closing the trade before it has had a chance to develop.
If neither extreme is reached within a maximum bar count, the trade closes as a Timeout. Either way, the indicator becomes ready to evaluate the next consolidation and breakout immediately.
3. Optional VW RSI and MFI confirmation
EV Edge includes an inline volume weighted RSI and Money Flow Index, calculated independently of any other indicator. The volume weighted RSI multiplies each bar's price change by its relative volume before the RSI calculation, so high-volume bars carry more weight than low-volume bars. The MFI is calculated from typical price multiplied by volume.
The master toggle enables or disables the confirmation filter entirely. When the master is on, the sub-toggles beneath it determine which meters are used: VW RSI, MFI, or both together with AND logic. When the master is off, signals fire without any momentum requirement regardless of the sub-toggle states.
When the confirmation filter is enabled, a long signal requires the selected meter or meters to be above their respective midlines, and a short signal requires them to be below. The filter is disabled by default so that signal frequency with and without confirmation can be compared directly.
VW RSI and MFI will sometimes point in different directions. This is not a fault - they measure related but distinct things. VW RSI weights price change by relative volume and responds quickly to momentum shifts. MFI incorporates the full money flow through typical price and volume and tends to reflect sustained buying or selling pressure. When they agree, the confirmation is stronger. When they disagree, the dashboard shows exactly where each stands so the trader can weigh them independently.
An optional mini panel on the dashboard shows the current VW RSI and MFI values with their percentage meters, zone state, and a Confirms row showing which direction - or directions - they currently support, regardless of whether the filter itself is active. This makes it possible to observe what the filter would do before committing to it.
Divergence detection is built into the VW RSI engine. When a bullish divergence is detected - price making a lower low while VW RSI makes a higher low - a line is drawn on the chart connecting the two pivot points in the bull color. The same applies in reverse for bearish divergences. The pivot window used for detection is configurable through the Divergence Sensitivity setting: High uses a 3-bar window for more frequent signals, Medium uses 5 bars as the default, and Low uses 10 bars for major pivots only. Divergence lines are purely visual and have no effect on signals or the EV score.
An important distinction: the Confirms row and the EV score answer different questions. Confirms reflects what VW RSI and MFI are doing right now - whether the current momentum supports the trade direction. The EV score reflects what price actually did after the signal fired - whether the breakout followed through. These two readings can point in opposite directions and both be correct. A short trade can show Confirms: Short because momentum is currently bearish, while the EV score sits at 15 because price bounced sharply after entry and never moved in the intended direction. The Confirms row describes the current environment. The EV score describes the trade's history since entry.
4. Multi-timeframe trend bar
A separate small panel shows trend direction across six timeframes - 1 minute, 5 minutes, 15 minutes, 1 hour, 4 hours, and daily - based on whether the 9-period EMA is above or below the 21-period EMA on each timeframe. A bull count from 0 to 6 summarizes how many of those timeframes currently agree on an upward trend.
This panel is independent of the signal logic. It provides context for whether a breakout on the current chart is aligned with or against the broader trend structure, without enforcing that alignment as a requirement.
5. EMA visual confluence
Four EMAs - 9, 21, 50, and 200 - can each be toggled on independently, with their own color and line width settings. These are plotted purely for visual reference. They do not feed into the consolidation detection, the EV score, the confirmation filter, or any other calculation. They exist so that price action can be viewed against common moving average levels without affecting how the indicator behaves.
6. Trade log
When enabled, a table records the most recently closed trades - direction, entry EV score, exit EV score, exit reason, and number of bars held. The table holds a configurable number of recent trades, with the newest entry at the top and older entries pushed out once the limit is reached.
Because entry EV is fixed at 60 for every trade, the exit EV and exit reason are what differentiate one trade from another in the log. A trade that exits at EV High after a small number of bars represents a fast, clean continuation. A trade that exits at EV Low after a small number of bars represents a fast failure. A trade that times out without reaching either extreme represents a setup that drifted without committing strongly in either direction.
The trade log does not persist across chart reloads. It reflects the trades that occurred since the indicator was applied to the current chart session.
7. Dashboard
The main dashboard shows the current trade status - long active, short active, or no signal - the live EV score as both a number and a ten-segment meter, the current EV zone, and the number of bars tracked relative to the maximum. The EV score number, meter, and zone text all use the four-zone color system described in the colors section above. When the VW RSI and MFI mini panel is enabled, it appears as additional rows in the same table.
A small blinking indicator - alternating between a filled and hollow dot - appears next to the Status row whenever a trade is active, and disappears when no trade is active. The indicator updates on a bar-by-bar basis, including the live, currently forming bar, so on lower timeframes it provides a continuously refreshing visual cue that the EV engine is actively tracking a trade.
Dashboard position and text size are independently configurable, with tiny, small, and normal size options to suit different chart layouts.
8. Settings reference
8.1 Consolidation detection
- Consolidation lookback: bars used to measure the consolidation range. Default 12.
- Compression factor: how tight the range must be relative to the ATR-based average to qualify as consolidation. Default 0.65.
- ATR length: lookback for the Average True Range used throughout the indicator. Default 14.
- Min bars in consolidation: minimum consecutive compressed bars required. Default 4.
8.2 Breakout signal
- Breakout buffer: extra distance beyond the consolidation edge, as a multiple of ATR, required to confirm a breakout. Default 0.1.
- Require right-side-of-V alignment: breakout must continue in the direction of the pre-consolidation move. Default on.
- Impulse lookback: bars before the consolidation compared to determine the prior move direction. Default 8.
8.3 EV score engine
- Include volume component: blend volume behavior into the EV score. Default on.
- Price action weight and volume weight: relative weighting of the two components. Defaults 0.7 / 0.3.
- Volume MA length: lookback for the volume moving average used in the volume ratio. Default 20.
- EV improving threshold: score at or above this value is classified as Improving. Default 70.
- EV decaying threshold: score at or below this value is classified as Decaying. Default 30.
- Max bars to track: hard cap on how long a trade is tracked before timing out. Default 30.
- Early exit EV high: score at or above this value triggers an immediate EV High close. Default 90.
- Early exit EV low: score at or below this value triggers an immediate EV Low close. Default 5.
- Min bars before early exit: bars that must pass before an extreme score can close the trade. Default 3.
8.4 VW RSI / MFI confirmation filter
- Require confirmation for entries: master toggle for the entire filter. Default off.
- VW RSI length and volume smoothing: lookback periods for the volume weighted RSI calculation. Default 14 each.
- VW RSI confirmation midline: threshold for long versus short confirmation. Default 50.
- Use VW RSI for confirmation: sub-toggle. Default on.
- MFI length: lookback for the Money Flow Index. Default 14.
- MFI confirmation midline: threshold for long versus short confirmation. Default 50.
- Use MFI for confirmation: sub-toggle. Default on.
- Show VW RSI / MFI mini panel: adds informational rows to the dashboard regardless of filter state. Default on.
- VW RSI overbought / oversold levels: visual zone thresholds shown in the dashboard. Defaults 75 / 25.
- Show divergence lines: draws diagonal lines on the chart where VW RSI divergences are detected. Default on.
- Show bullish / bearish divergence: independent toggles per divergence direction. Default on.
- Divergence line width: stroke width for divergence lines. Default 1.
- Divergence sensitivity: pivot window for divergence detection. High = 3 bars, Medium = 5 bars (default), Low = 10 bars.
8.5 Multi-timeframe dashboard
- Show multi-timeframe trend bar: toggle. Default on.
- MTF panel location: corner placement on the chart. Default bottom left.
8.6 EMA visual confluence
- Show EMA 9, 21, 50, 200: independent toggles, all default on.
- Color and width: configurable per EMA.
8.7 Bull / bear colors
- Bull color and bear color: applied to entry label backgrounds, plotted signal markers, dashboard status, VW RSI/MFI confirmations, and the multi-timeframe trend bar.
- Measurement / brand color: applied to the EV score meter when no trade is active, the brand row in both dashboards, and the text inside entry and EV shift labels.
- Signal label transparency: background transparency for entry and EV shift labels. Default 50.
8.8 EV quality colors
- Trade zone box color: single monochrome color for the trade zone box. Default steel grey.
- Scale box intensity with EV extremity: when on, the box becomes more opaque as EV approaches 0 or 100, and more transparent near 50. Default on.
- EV improving / decaying / neutral text colors: used for the Exit EV value in the trade log. Separate from the four-zone dashboard colors.
8.9 Trade log
- Show trade log table: toggle. Default on.
- Number of trades to show: how many recent trades are displayed. Default 5.
- Trade log location: corner placement on the chart.
8.10 Visuals
- Show dashboard, dashboard location, and dashboard size.
- Show consolidation box.
- Show signal labels.
- Show trade zone box.
- Extreme EV shift threshold: minimum single-bar EV change, or a zone crossover, required to display a shift label. Default 15.
9. How to use
9.1 Reading the EV score
The EV score has one rule: higher is better, lower is worse - for both long and short trades. When a long signal fires and the score climbs, the long is working. When a short signal fires and the score drops, the short is not working - price is moving up against the position. The score is direction-independent. It measures how well the trade is developing relative to what was expected at the moment of the breakout, nothing more.
The score is most informative as a trajectory, not a single value. A score climbing steadily from 60 toward 70 and beyond suggests a clean continuation. A score that drops sharply within the first few bars after entry, particularly if it crosses below the decaying threshold, suggests the breakout lacked follow-through. The minimum bars before early exit setting exists so that this initial period can be observed rather than immediately closing the trade on the first adverse tick.
9.2 Reading the four-zone color system
The EV score number, the ten-segment meter, and the EV Zone text all use the same four-zone color logic. When a trade is active, the colors read as follows: green means the trade is progressing well, gold means the score is sitting in neutral territory without a strong signal in either direction, red means the trade is going poorly and the breakout likely lacked follow-through, and amber at either extreme means an automatic exit is approaching. No active trade is grey.
These colors are consistent across both long and short trades. A short showing green is performing correctly. A long showing red is not.
9.3 Reading the trade zone box
The trade zone box appears once a signal fires and grows with the trade's price range on every subsequent bar. Its intensity reflects how far the EV score currently sits from the neutral midpoint - faint near 50, increasingly opaque as the score approaches either 0 or 100. A box that has become noticeably more opaque indicates the EV score has moved decisively toward one of its extremes. The EV Zone text in the dashboard and the four-zone color together tell you which extreme and whether that is favorable or not.
9.4 Using the trade log to evaluate settings
Because every closed trade is recorded with its exit reason and duration, the trade log can be used to assess whether the current settings are producing the expected distribution of outcomes. A log dominated by EV Low exits at short durations may indicate that the breakout filter is too permissive, allowing weak setups through. A log with many Timeout entries may indicate that the early exit thresholds are too extreme to be reached under current market conditions, or that the EV score's sensitivity needs adjustment. Reviewing the log periodically - particularly when testing on a single instrument and timeframe over a consistent period - is the intended way to calibrate the EV score engine to a specific market.
9.5 Using the VW RSI / MFI mini panel before enabling the filter
Because the mini panel shows what the confirmation filter would do without requiring it to be active, it can be left on while running the indicator without the filter enabled. This allows direct observation of how often VW RSI and MFI would have confirmed or rejected the signals that fired, before committing to the filter and reducing signal frequency.
9.6 Using the multi-timeframe bar as context, not as a gate
The multi-timeframe trend bar does not block or filter signals. A breakout signal can fire even when the bull count is low or when the immediate timeframe disagrees with higher timeframes. The intended use is to provide situational awareness - a breakout that aligns with a high bull count carries different context than one that fires while higher timeframes are pointing the other way, even though both will generate the same signal and the same starting EV score.
9.7 Illustrative bull scenario
Educational example only. Not a trading recommendation.
Price consolidates in a tight range for several bars after an upward move. The range compresses below the ATR-based threshold and the minimum bar count is reached. Price closes above the consolidation high by more than the breakout buffer, and the move continues in the same direction as the prior upward impulse - the right side of the V. A long signal fires with an EV score of 60, shown with a bull-colored label. The dashboard switches to LONG ACTIVE with a blinking dot. Over the following bars, price continues higher without returning to the consolidation zone. The EV score climbs past 70, the dashboard color shifts to green, and the trade zone box becomes noticeably more opaque as the score moves away from neutral. The EV Zone text switches to Improving. Within several bars the score reaches 90, the amber warning zone, and the trade closes as an EV High exit, recorded in the trade log.
9.8 Illustrative bear scenario
Educational example only. Not a trading recommendation.
A consolidation forms after a downward move and breaks lower, aligned with the prior impulse. A short signal fires with an EV score of 60, shown with a bear-colored label. On the next bar, price reverses and closes back above the lower boundary of the consolidation it broke from. The retracement penalty is applied, scaled by how far price has moved back into the zone. The EV score drops sharply. The dashboard color shifts to red and the EV Zone text switches to Decaying. The Confirms row in the VW RSI panel may still show Short if momentum meters remain bearish - this is not a contradiction. Confirms reflects current momentum; the EV score reflects what price did since entry. After the minimum bar count has passed, the score drops below 10, entering the lower amber zone, and the trade closes as an EV Low exit, recorded in the trade log as a fast failure.
10. Tested instruments and timeframes
EV Edge has been tested across a range of futures and spot crypto markets, including MNQ, MES, MGC, MCL, MBT, M2K, and SIL futures, as well as BTCUSDT, SOLUSDT, and ETHUSDT on Binance, across the 1 minute, 5 minute, 15 minute, 1 hour, and 4 hour timeframes.
Results by timeframe:
- 1m and 5m: recommended primary timeframes. EV High and EV Low exits fire frequently and the score evolves quickly enough to be actionable for scalping.
- 15m: works well. Max bars setting of 15 to 20 recommended.
- 1H: functional, but overnight and weekend gaps on futures affect the score behavior. Max bars of 10 to 15 recommended. Best used for directional context rather than as the primary trading timeframe.
- 4H: not recommended. The bar count required for meaningful EV evolution exceeds practical limits and most trades time out before the score develops.
EV Edge is designed primarily as a 1m to 15m scalp and intraday tool, with 1H usable for higher-timeframe bias.
11. Tips
The default EV score formula has not been calibrated to any specific instrument or timeframe. The early exit thresholds, the retracement penalty, and the volume weighting are starting points. The trade log exists so that these can be evaluated against real outcomes on the instrument and timeframe actually being traded, rather than assumed to be correct.
Testing on a single instrument and a single timeframe for a sustained period produces a more useful trade log than switching between instruments or timeframes during the test. Mixing conditions makes it difficult to separate the effect of the EV score formula from the effect of changing market behavior.
The right-side-of-V filter and the VW RSI/MFI confirmation filter both attempt to address the same underlying concern - whether a breakout has genuine momentum behind it. Running both at maximum strictness simultaneously may reduce signal frequency more than either filter alone would suggest. Testing each independently before combining them clarifies which filter is contributing more to signal quality.
On futures markets, overnight and weekend gaps can cause single-bar EV score jumps that do not reflect genuine price movement during the session. On the 1H timeframe in particular, a gap open can spike or collapse the drift component in ways that would not occur on a continuous chart. This is expected behavior, not a fault. Keeping the max bars setting lower on higher timeframes reduces the window during which a gap can distort the score history.
The Confirms row and the EV score are not the same measure and should not be read as one. Confirms reflects whether VW RSI and MFI currently support the trade direction. The EV score reflects how price actually moved since the signal fired. They can disagree and both be correct. A trade showing Confirms: Short alongside EV 12 is not contradictory: it means momentum currently supports the short direction, but the price movement since entry has not followed through. Understanding the difference between these two readings is one of the most useful things you can take from the dashboard.
12. Disclaimer
This indicator is provided for educational and informational purposes only. Nothing in this document or in the indicator output constitutes financial advice or any form of recommendation. Trading financial instruments involves substantial risk of loss. Past performance is not indicative of future results. You may lose all of your invested capital.
Anonycryptous accepts no responsibility or liability for any losses incurred as a result of using this indicator.
Indicator
Volatility Contraction Pattern [AGPro Series]Volatility Contraction Pattern
🧠 Core Idea
Is volatility contracting into a tighter and tighter base that is coiling toward a breakout pivot, and how high-quality is that setup?
This script is built to answer that one question with structure instead of guesswork.
📌 Overview / What It Does
Volatility Contraction Pattern is a breakout-readiness decision engine built around the classic VCP structure: a base where price pulls back in successive, progressively shallower contractions, coiling into a breakout pivot. It reads the swing structure as a zigzag, measures each contraction leg, and counts how many recent legs are tightening into the present.
From that it builds a single 0-100 readiness score by weighing four things: how many successive contractions are present, how tight the latest contraction is relative to ATR, whether the base sits inside a constructive trend, and whether volume is drying up into the base. It then marks the pivot breakout level at the most recent swing high, a tight invalidation at the latest contraction low, a measured-move target projected from the base height, and a clear next-action state.
It does NOT predict price, generate buy or sell signals, or automate trades. It organizes the base-and-breakout picture into a structured, scored read so a contraction setup is easier to recognize and plan around. Every output is analytical context, not a recommendation.
🎯 Purpose & Design Philosophy
Most breakout tools react to a single breakout bar after it prints, or they mark a generic low-volatility squeeze and leave the rest to interpretation. Far fewer frame the multi-contraction base as a staged, scored readiness with a defined pivot and a tight, structural risk reference.
This engine was built to fill that gap. It is for the patient trader who prefers to wait for a proper base to form rather than chasing every move, and who values a tight, well-defined risk reference. It supports a base-and-breakout mindset: let the contraction sequence develop, read how ready and how tight it is, mark the pivot and the invalidation, and let broader market context confirm or deny the idea. The aim is structured patience, not a shortcut around it.
⚡ Why This Script Is Different
Most tools mark a single squeeze state or fire the instant a breakout bar appears.
This script does NOT call the breakout, does NOT fire trade signals, and does NOT treat one tight bar as a setup.
Instead, it stages the whole contraction sequence. It counts successive tightening legs, measures current tightness in ATR, and resolves the base into a 0-100 readiness score with a pivot breakout level, a tight invalidation at the latest contraction low, and a measured-move target. The result is a calm, structured base read with a defined risk reference, rather than a backward-looking alert or a single-bar trigger.
⚙️ Methodology
1. Context Detection
An ATR baseline and an EMA trend backbone with a slope check describe the current environment.
2. Structure Mapping
Swing highs and lows are tracked as an alternating zigzag. The amplitude of each recent leg is measured to describe the contraction sequence.
3. Contraction Evaluation
The engine counts how many successive legs are tightening into the present, measures the latest contraction tightness against ATR, checks trend context, and reads volume dry-up. These combine into a single 0-100 quality score, and the base resolves into a state.
4. Visual Output
The base zone, pivot breakout level, tight invalidation, measured-move target, a centered readiness badge, and moderate state labels are rendered cleanly on the chart and in the panel.
🗺️ How to Read the Chart
- Base zone: a shaded box spanning the contraction base from its low to its high, tinted by the current state.
- Pivot line and tag: the breakout level at the most recent swing high, the trigger reference.
- Invalidation line and tag: the latest contraction low, the tight structural risk reference.
- Target line and tag: the measured-move objective projected from the base height above the pivot.
- Readiness badge: centered inside the base zone, showing the state and its 0-100 score.
- State labels: compact markers when the pattern enters Pivot Ready, Breakout, or Reset.
- Panel: a fixed readout of state, quality score, pivot, target, contractions and tightness, invalidation, and action.
🚦 Signals & States
- No Base: not enough structure to define a contraction base.
- Base Forming: a base is developing but not yet tight or built enough.
- Coiling: successive contractions are tightening and readiness is building.
- Pivot Ready: the base is tight and near the pivot, with a qualifying score.
- Breakout: price has moved beyond the pivot level.
- Reset: the base was invalidated below its risk reference.
These are interpretive states, not instructions. Pivot Ready does not mean buy; it means the base is tight and near its trigger in the current context.
🔔 Alerts Logic
Three optional alerts are available:
- Pivot Ready: triggers when the base becomes pivot-ready.
- Breakout: triggers when price moves beyond the pivot.
- Pattern Reset: triggers when the base is invalidated.
Alerts are attention markers that point you back to the chart for context. They are not trade instructions and carry no guarantee of any outcome.
🧩 Confluence Logic
The score is itself a confluence read. When the contraction count, the latest-leg tightness, the trend context, and the volume dry-up all agree, the score is higher and the base is more pronounced. When they disagree, the score stays moderate and the state often remains Base Forming, which is information in itself: the base is not yet a clean contraction.
📊 When to Use
- After a strong move, when price begins to base and contract rather than trend.
- In constructive consolidations where pullbacks are getting shallower.
- As a continuation-base overlay alongside your own structure and risk framework.
- On liquid symbols with enough swing history for the structure to form.
⚠️ When NOT to Use
- In choppy markets with no clear base structure.
- In very low-liquidity symbols or sessions, where swings are unreliable.
- In extremely noisy conditions, where levels are violated erratically.
- As a standalone entry trigger, or in isolation from market context and risk.
🎛️ Key Inputs
- Swing Strength and Swing Memory: how swings are detected and how many are retained.
- Base Swing Window: how many recent swings define the active base.
- Trend Backbone EMA and Slope Bars: the trend-context weighting.
- Use Volume Dry-Up and its windows: whether and how decreasing volume contributes.
- Tightness Scale: the ATR reference for scoring contraction tightness.
- Pivot-Ready Score, Pivot Proximity, Ready Tightness: thresholds that define a pivot-ready base.
- Visual, label, and panel controls: base zone, pivot, target and invalidation lines and tags, label density, panel location, theme, and font size.
🖥️ Interface & Visual Design
The panel is the primary readout, leading with the state and 0-100 score, then pivot, target, contractions and tightness, invalidation, and a concise action line. On the chart, the base zone anchors the structure, the pivot and invalidation give the trigger and the tight risk, and the measured-move target frames the objective. The readiness badge sits centered inside the base so the read is tied to the structure. Labels are kept moderate and fire only on state transitions so the chart stays clean. Panel location, theme, and font size are adjustable; the panel is shown by default for readability.
🧪 Practical Usage Workflow
1. Read the panel: note the state and the quality score.
2. Check contractions and tightness: how many tightening legs, and how tight now.
3. Watch the pivot: the breakout reference at the top of the base.
4. Note the invalidation and target: the tight risk reference and the measured objective.
5. Confirm with your own market structure, higher-timeframe context, and risk framework before any decision.
🔍 Interpretation Guidelines
Think of the read as a staged base readiness, not a forecast. A higher score means more successive contractions, tighter current price action, and better trend and volume context. A moderate score or a Base Forming state means the base is not yet clean and patience is warranted. The invalidation is a structural reference, not a hard line. Always interpret the base inside the broader market context rather than in isolation.
🚫 What This Script Is NOT
- It is NOT a prediction engine and does not forecast price direction.
- It is NOT financial advice or a recommendation to buy or sell.
- It is NOT an automated trading system.
- It does NOT produce guaranteed signals or outcomes.
⚠️ Limitations & Transparency
Outputs depend on detected swing structure and may differ across timeframes and symbols. Volatility, liquidity, and changing market conditions affect how bases form and how they resolve. A base can break out, fail, or simply drift; the engine describes current structure and cannot know the future. Any pivot can be exceeded or fail to be reached, and any base can be invalidated.
🧠 Market Context Notes
Bases tend to form after directional moves, as participants pause and pullbacks get shallower. Classic contraction structure pairs successively tighter pullbacks with drying volume, often inside a constructive trend. This engine encodes that logic into a single staged read, but broader market context always has the final word, and a tight base is a condition, not a promise.
🧾 Use Case Examples
- After a strong advance, price bases with two or three progressively tighter pullbacks: the engine moves from Base Forming to Coiling and may reach Pivot Ready near the pivot.
- Volume dries up into a tight base inside an uptrend: the quality score rises as contraction, tightness, trend, and volume align.
- Price breaks below the latest contraction low: the engine reports Reset, signaling the contraction structure has invalidated.
🧱 System Philosophy
This tool reflects the AGPro Series approach: convert a familiar but messy concept into a calm, structured, decision-support read. A contraction base is easy to misjudge by eye; the value is in staging it into an honest, scored read with a defined risk reference, while respecting the trader's own judgment rather than replacing it.
🔐 Non-Promise Statement
This script makes no promise of profit, accuracy, or any specific result. It is an analytical and organizational tool. No certainty is offered or implied.
📉 Risk Disclosure
Trading involves substantial risk, and most participants can lose money. This script is provided for educational and analytical purposes only and does not constitute financial advice. All decisions, positions, and outcomes remain entirely your own responsibility. Always manage risk and trade within your own plan.
📚 Educational Note
Used as intended, the engine can sharpen how you think about contraction bases: how many tightening legs are present, how tight the base has become, where the pivot and the risk sit, and what would invalidate the structure. Treat it as a lens for structured analysis, and keep building your own market understanding alongside it.
Indicator
Auto Range / Lateral Consolidation Box DetectorAuto Range / Lateral Consolidation Box Detector
Overview
The Auto Range / Lateral Consolidation Box Detector is designed to automatically identify and draw price ranges where a stock is moving sideways after a prior advance.
Instead of manually drawing rectangle boxes around consolidation areas, this indicator detects them objectively using price containment, range width, prior trend movement, ADR, moving-average structure, and optional volume/RSI filters.
The purpose is to help traders identify:
lateral consolidations
tight launch shelves
continuation bases
range breakouts
failed ranges
breakout/retest zones
early momentum continuation structures
This tool is especially useful for traders who look for stocks that have already shown strength, pause in a controlled range, and then attempt to continue higher.
Core Concept
Many strong momentum moves do not happen randomly. They often follow a repeatable structure:
Prior advance → sideways range → breakout → continuation
This indicator attempts to locate that sideways range automatically.
The blue dashed boxes show detected consolidation zones. When price breaks above a completed range, the indicator can mark the breakout and preserve the prior box so the trader can review the structure historically.
The goal is not to predict breakouts blindly. The goal is to make range structure easier to detect, measure, and trade with defined risk.
What the Indicator Detects
The indicator identifies two main types of structures:
1. Standard Rectangle Range
This is a broader lateral consolidation that usually forms over a larger number of candles.
It is useful for detecting:
multi-week consolidations
continuation bases
sideways digestion after an advance
breakout/retest setups
controlled pullbacks above moving averages
A standard rectangle is best used when price has already advanced and then begins moving sideways in a defined box.
2. Tight Launch Shelf
This is a shorter, tighter range that often forms just before a momentum expansion.
It is useful for detecting:
short pauses near highs
high-tight continuation shelves
pre-breakout compression
momentum names that do not build long bases
stocks that pause briefly before expanding again
This feature was added because some of the strongest stocks do not consolidate for weeks. They may only pause for several sessions before breaking out.
How the Boxes Work
The indicator measures the range using completed prior candles only.
This is important because the breakout candle itself should not distort the range.
For example, if a stock breaks out above a tight rectangle, the breakout candle may be much larger than the range. If the script included that candle in the box calculation, it would make the range look wider than it actually was.
This script avoids that issue by asking:
“Before the current breakout candle, was there a valid sideways range?”
That allows the indicator to draw the actual consolidation area more accurately.
Visual Guide
Visual ElementMeaningBlue dashed boxDetected standard rectangle rangePurple dashed boxDetected tight launch shelfUpper box lineRange resistance / breakout levelLower box lineRange support / invalidation referenceMidlineInternal range midpointBO markerBreakout above range with volumeBO? markerPrice breakout without volume confirmationFAIL markerBreakdown below rangeScore labelShows range quality, width, ADR, prior move, and containment
How I Use It in My Strategy
This indicator fits into a continuation-style trading strategy built around strength, structure, and timing.
The process is:
1. Find a stock with prior strength
I want to see that the stock has already proven demand.
That may include:
strong prior advance
relative strength versus the market
rising moving averages
reclaim or hold above the 200 SMA
improving volume profile
strong sector or theme participation
recent earnings, catalyst, or institutional attention
The indicator is not used to find random sideways stocks. It is used to find sideways ranges after strength has already appeared.
2. Let the stock build a range
Once a stock has moved, I want to see whether it can hold gains.
A clean range tells me:
buyers are defending higher prices
sellers are not fully taking control
price is digesting instead of collapsing
moving averages may be catching up
risk can be defined around the box
This is where the auto box becomes useful.
Instead of manually drawing every range, the indicator highlights areas where price is compressing or consolidating.
3. Use the box for trade planning
The box gives me three major trade locations:
Trade LocationUse CaseRange lowSupport-defense entryRange highBreakout triggerBreakout retestPreferred continuation entry
I generally do not want to enter randomly in the middle of the box unless I have another strong reason.
The best trades usually come from:
range-low defense,
breakout through range high,
or breakout followed by a retest that holds.
4. Confirm with other tools
This indicator identifies structure, but it is not a standalone buy signal.
Before taking a trade, I still want confirmation from:
relative strength
catalyst/news/earnings context
sector/theme strength
ADR/movement potential
volume expansion
VWAP/AVWAP location
volume profile levels
option-chain liquidity if using options
broader market regime
The box tells me where the trade may be forming.
The rest of the process tells me whether it deserves capital.
How Other Traders Can Use It
This indicator can be adapted to several trading styles.
Momentum Traders
Momentum traders can use it to identify stocks that are pausing after a strong move and preparing for another push.
Best use:
breakout above range high
breakout with volume
tight launch shelf breakouts
high-relative-volume names
strong sector/theme participation
Swing Traders
Swing traders can use it to locate multi-day or multi-week continuation bases.
Best use:
buy breakout/retest
enter near range support with defined risk
use the box low as invalidation
use the box height for measured-move targets
combine with daily/weekly trend structure
Breakout Traders
Breakout traders can use the box high as an objective breakout level.
Best use:
price closes above the range high
volume expands above average
range is not too wide
stock is above key moving averages
market regime supports continuation
Mean-Reversion Traders
Mean-reversion traders can use the range boundaries in the opposite way.
Best use:
fade weak breakouts back into the range
buy range low if buyers defend
sell/avoid failed range highs
use the midpoint as a decision level
Position Traders
Position traders can use detected boxes as add zones during a larger trend.
Best use:
add after a valid base forms above rising moving averages
trail risk below higher base lows
identify where trend continuation is being accepted
avoid adding after emotional vertical moves without digestion
Input Settings Explained
Standard Rectangle Bars
Controls how many prior candles are used to detect a normal consolidation box.
Higher values detect longer bases.
Lower values detect shorter ranges.
Suggested use:
StyleSettingFast momentum8–12Swing trading12–20Longer bases20–40
Tight Launch Shelf Bars
Controls how many prior candles are used to detect short, tight shelves near highs.
This is designed for stocks that pause briefly before breaking out.
Suggested use:
StyleSettingVery fast momentum4–6Normal launch shelf6–10Slower swing shelf10–15
Prior Move Lookback Bars
Determines how far back the script looks to measure whether the stock had a prior advance before the range.
Higher values allow the script to detect bases after larger, older moves.
Suggested use:
StyleSettingShort-term momentum20–35Swing continuation35–60Longer trend bases60–100
Minimum Prior Advance %
Defines how much price must have advanced before the range qualifies.
This helps prevent the script from highlighting random sideways chop.
Suggested use:
Market TypeSettingLarge caps8%–15%Mid caps15%–25%Small caps / high ADR20%–40%
A higher setting makes the script more selective.
Minimum Close Containment %
Controls how many closes must remain inside the box.
A higher value requires cleaner sideways behavior.
Suggested use:
Range QualitySettingLoose ranges60%–70%Normal ranges70%–80%Very tight clean bases80%–90%
Max Standard Range Width x ADR
Controls how wide a normal range can be compared with the stock’s average daily range.
Lower values require tighter bases.
Higher values allow wider, looser consolidations.
Suggested use:
PreferenceSettingTight clean bases only1.5–2.25Balanced2.5–3.0Loose momentum names3.0–4.0
Max Tight Shelf Width x ADR
Controls how wide a tight launch shelf can be.
Because launch shelves should be tighter than standard ranges, this number is usually lower.
Suggested use:
PreferenceSettingVery tight shelves1.0–1.3Balanced1.4–1.8Volatile small caps1.8–2.5
ADR Length
Controls the lookback period for average daily range.
Default is 20, which approximates one trading month.
Suggested use:
PurposeSettingShort-term sensitivity10Standard20Smoother ADR30–50
Volume Average Length
Controls the average volume lookback used for breakout and volume comparison.
Suggested use:
StyleSettingFast momentum10Standard swing20Smoother volume filter30–50
Max Range Volume vs Avg
This controls how much volume is allowed during the range if the volume filter is enabled.
Lower values require quieter consolidation.
Higher values allow more active ranges.
Suggested use:
Range TypeSettingQuiet base0.8–1.0Normal base1.0–1.25Active momentum range1.25–1.75
RSI Settings
RSI filters can be used to avoid ranges that are either too weak or too extended.
Suggested use:
PurposeSettingAvoid weak rangesMinimum RSI 40Allow momentum leadersMaximum RSI 80–85Stricter resetMax RSI 70–75
For strong momentum stocks, I prefer leaving RSI control flexible because strong names can remain elevated before breaking out.
Require Price Above 200 SMA
When enabled, the script only accepts ranges where price is above the 200 SMA.
This is useful for trend-following and continuation strategies.
Turn this off if you want to scan:
bottoming structures
early reversals
200 SMA reclaim attempts
accumulation ranges below the 200 SMA
Require Prior Advance
When enabled, the script requires price to have moved up before forming the range.
This is best for continuation traders.
Turn this off if you want to study:
accumulation bases
bottoming ranges
reversal setups
sideways structures before a first move
Require Volume Control
When enabled, the range must have controlled volume relative to average volume.
This helps filter out chaotic ranges.
However, for volatile small caps or active momentum names, I often leave this off because strong stocks can consolidate with active volume.
Require RSI Control
When enabled, RSI must remain within the selected range.
This can help avoid weak or overextended setups.
However, momentum leaders can remain strong for longer than expected, so this setting is optional depending on the strategy.
Setup Score
The label displays an Auto Range Score out of 10.
The score considers:
prior move
price above 200 SMA
containment inside the range
range width versus ADR
volume behavior
OBV behavior
RSI condition
ADR level
The score is not a buy signal. It is a structure-quality score.
General interpretation:
ScoreInterpretation9–10Very clean structure7–8Good watchlist candidate5–6Needs more confirmationBelow 5Low-quality or incomplete structure
Trading Notes
A detected box is only a location tool.
It does not replace:
market regime analysis
risk management
catalyst research
relative strength checks
liquidity checks
options-chain review
trade planning
The highest-quality setups usually combine:
strong prior move + clean box + range containment + volume expansion on breakout + supportive market conditions.
Risk Management
The box can help define risk.
Common invalidation methods:
stop below range low
stop below breakout candle low
stop below retest low
stop below rising 20 EMA or 50 SMA
exit if breakout fails back into range
avoid if price breaks below the box with volume
The cleanest setups are usually those where the box gives a tight, logical invalidation level.
Important Disclaimer
This indicator is for educational and research purposes only.
It does not provide financial advice, investment advice, or guaranteed trade signals. All trading involves risk. Traders should use their own research, risk management, and judgment before entering any position. Indicator
Range Zones ATR Range Zones ATR
Range Zones ATR is an open-source indicator designed to detect, validate, score, and maintain sideways price zones using ATR-normalized structure analysis.
The script is built for one specific purpose: identifying areas where price is behaving like a genuine horizontal range rather than a brief pause inside an ongoing trend. Instead of marking every local consolidation, it evaluates whether price is compressed relative to current volatility, whether directional pressure remains limited, whether the market is interacting with both sides of the structure, and whether internal movement stays balanced enough to justify treating the area as a meaningful zone of acceptance.
In practical terms, this indicator highlights parts of the chart where price is rotating within a contained area instead of moving cleanly in one direction. That makes it useful for studying balance, consolidation, containment, and possible expansion after compression.
What this indicator is
This indicator is a volatility-adjusted range structure detector.
Its main task is to answer a structural question:
Is price actually trading inside a valid sideways regime, or is the apparent consolidation too directional, too unstable, or too impulsive to be treated as a real range?
To answer that, the script does not rely on a single condition. It combines multiple filters and measurements into one process. A visible zone is only created after the candidate structure survives tests related to compression, trend pressure, slope behavior, duration, touch activity, oscillation, drift, and local expansion.
What this indicator shows
The script draws zones directly on the chart as horizontal boxes representing areas where price is being accepted inside a relatively contained environment.
The indicator can classify zones in three different ways:
Base Range
A confirmed sideways zone that passed the core validation logic.
Prime Range
A higher-quality confirmed zone with a stronger final score. These zones generally show cleaner balance, stronger containment, and better internal structure than a standard range.
HTF Confluence
A confirmed local zone that also overlaps with a valid higher-timeframe range context when the optional multi-timeframe feature is enabled.
These labels are structural descriptions, not trade commands. They are intended to help the user understand the character and quality of the detected range.
What the script measures
The indicator is built around the idea that a valid range should appear compressed, balanced, and relatively non-directional. To evaluate that, it measures several parts of market behavior.
Range width relative to ATR
The script compares the width of recent price envelopes to ATR. This allows the indicator to interpret range width relative to current volatility instead of using a fixed distance. A narrow range on one symbol may be wide on another, and a usable range on one timeframe may be insignificant on another. ATR normalization helps the script stay adaptive across different chart conditions.
Multiple internal envelopes
The script builds short-, medium-, and long-lookback envelopes from recent highs and lows. It then compares those candidates and selects the one that provides the best structural fit. This makes the detection process more flexible than relying on only one fixed lookback.
ADX trend pressure
A stable range normally should not exist in a strongly directional environment. The script uses ADX as part of its filter and scoring process to reduce the chance of classifying strong directional movement as sideways structure.
EMA slope and linear regression slope
A market can appear flat while still drifting directionally. To reduce that problem, the script checks both EMA slope and linear regression slope. This helps filter out sloped price action that does not behave like a clean horizontal range.
Minimum persistence
A valid range should remain stable for a meaningful number of bars before it is trusted. The script therefore includes minimum-bar confirmation logic so that very brief pauses do not become fully confirmed zones too early.
Touch behavior
A healthy range usually shows repeated interaction with its boundaries. The script tracks touches near the upper and lower edges of the candidate zone to confirm that price is actually rotating through the structure rather than clustering on one side.
Internal oscillation
A sideways regime should contain some back-and-forth movement. The script evaluates oscillatory behavior within the candidate zone to avoid treating a slow directional drift as balanced consolidation.
Drift and efficiency
The script checks how directly price is moving from one point to another. If movement becomes too efficient or too directional, that is less consistent with a true range. If movement is choppier and more rotational, the structure is more likely to qualify.
Impulsive movement
Strong impulsive candles can weaken or invalidate the idea of a stable range. The script uses expansion and impulse-related checks to reject candidates that are behaving too aggressively.
Higher-timeframe overlap
When the optional MTF context feature is enabled, the script checks whether the local zone overlaps a confirmed higher-timeframe range area. If the overlap is meaningful, the zone can receive a score boost and be classified with higher structural context.
How the detection process works
At a high level, the script follows this workflow:
First, it builds recent envelopes from highs and lows using several internal lookbacks.
Second, it measures whether those envelopes are sufficiently compressed relative to ATR.
Third, it combines that compression with trend and slope conditions such as ADX, EMA slope, and linear regression slope.
Fourth, if the environment looks suitable, it starts tracking a candidate zone instead of drawing a confirmed zone immediately.
Fifth, while the candidate is active, it evaluates persistence, touch count, oscillation, drift, path efficiency, and impulsive behavior.
Sixth, if the candidate survives enough structural tests, it becomes a visible zone on the chart.
Seventh, once a zone is active, it can continue, refine, merge with a nearby compatible zone, or terminate if price no longer behaves like the same sideways regime.
Finally, if breakout alerts are enabled, the script only considers a breakout confirmed after price closes beyond the zone edge plus an ATR-based buffer.
This process is important because the indicator is not designed to draw every small pause. It is designed to identify consolidations that behave like actual balance.
How to read the zones
A visible zone should be interpreted as an area where the script sees containment, acceptance, and relatively balanced price behavior.
That can help the user evaluate:
whether the market is still consolidating rather than trending,
whether price is continuing to rotate inside the same area,
whether one side of the structure is weakening,
whether the range remains healthy,
or whether the market may be transitioning from compression into expansion.
A Base Range means the structure passed the standard confirmation requirements.
A Prime Range means the same structure passed with a stronger overall score.
An HTF Confluence zone means the local structure also aligns with a broader higher-timeframe range area.
These classifications describe current market structure. They do not guarantee that price will remain inside the zone or that the next movement will occur in a particular direction.
How to use this indicator
This indicator is best used as a market-structure and chart-context tool.
One practical use is to study where price is being accepted inside a contained area. When price remains inside a confirmed zone and continues to interact with both edges, the market may still be operating in a balanced regime.
Another use is to monitor edge behavior. The upper and lower zone boundaries can serve as structural reference areas. Repeated rejection near one side, repeated return toward the middle, or clean acceptance outside the zone may help the user judge whether the range is still functioning or beginning to fail.
The breakout logic can also be used for structure monitoring. Because the script requires price to move beyond the zone edge with an ATR-based buffer, it is more selective than a simple boundary touch. This helps reduce reactions to small wick-only violations and shallow overshoots.
The optional higher-timeframe context can be used to compare local balance with broader structure. A local range that overlaps a confirmed higher-timeframe range may be more relevant than an isolated local pause.
The script can also be used to filter low-quality consolidation. Many apparent ranges are only temporary slowdowns inside a directional move. This indicator tries to reject many of those cases by requiring better balance, persistence, touch behavior, and non-directional structure before a zone is confirmed.
What makes this indicator different
This script differs from simpler range tools in several ways.
ATR-normalized detection
The indicator evaluates range width relative to ATR instead of using fixed-width boxes. This helps the same logic adapt to different volatility conditions, symbols, and timeframes.
Multi-factor validation
The script does not rely on a single trigger. It combines compression, trend pressure, slope analysis, persistence, touch activity, oscillation, drift, and efficiency into one structural decision process.
Candidate-to-confirmation workflow
Many range tools mark a zone as soon as price becomes temporarily narrow. This script first tracks a candidate, then confirms it only if the structure continues to behave like a true sideways regime.
Quality classification
The script separates normal confirmed ranges from stronger confirmed ranges. This helps distinguish ordinary structure from zones that achieve better internal scores.
Zone merge logic
Nearby zones that belong to the same horizontal regime can be merged. This is useful because real consolidations are often fragmented by minor interruptions or short empty gaps that still belong to the same broader balance area.
Higher-timeframe confluence
The optional MTF feature is used as structural context rather than as a separate signal engine. This allows local zones to be strengthened when they align with a broader confirmed range.
Active zone maintenance
Once confirmed, a zone is not simply frozen in place. The script can continue refining and extending the zone while price remains compatible with the same range logic.
Input overview
Mode
Conservative, Balanced, and Aggressive modes control how selective the detection process is. Conservative mode generally favors fewer and stricter zones. Aggressive mode allows broader coverage.
Preset
Scalping, Intraday, and Swing presets adjust internal lookbacks and structural behavior for different trading horizons.
Price Series
The script can use close, hl2, hlc3, or ohlc4 as its selected price source in parts of the scoring and filtering process, while envelopes remain based on highs and lows.
Sensitivity
Sensitivity changes how tightly or loosely candidate structures are interpreted.
Min Bars and Min Score
These settings define how much persistence and quality a candidate needs before it can qualify as a visible zone.
Trend Filter
This filter reduces the chance of labeling strong directional movement as sideways structure.
Merge controls
Merge Zones, Merge Threshold, Merge Gap Bars, and Bridge Merge control whether nearby compatible zones should be combined into one broader regime.
MTF controls
MTF Context, Higher TF, and MTF Boost allow local structure to be compared against confirmed higher-timeframe range structure.
Visual controls
The script includes settings for fill, borders, labels, theme handling, and score visibility.
Alerts
Optional alerts are available for newly confirmed zones and for breakout events beyond an active zone.
Best use cases
This indicator is designed for users who want to study consolidation structure rather than only directional trend behavior.
It can be useful for identifying balanced price areas, monitoring acceptance inside a horizontal regime, watching for continuation or breakdown of an existing range, studying compression before expansion, and comparing local structure with higher-timeframe context.
Important limitations
This script is an indicator, not a strategy. It does not execute trades and it does not provide backtest results.
Like any range-based method, it can become less effective in environments dominated by persistent directional expansion, abrupt trend transitions, or sudden volatility shocks. A detected zone is the script’s structural interpretation of current price behavior, not a guarantee that price will remain contained.
Open-source note
This script is published as open-source so users can inspect the logic, understand how the methodology works, and build on the idea in accordance with PulseWire’s publication and reuse rules.
Indicator
Compression Pressure Map [AGPro Series]Compression Pressure Map
⚡ Overview
────────────────────────────────────────
Compression Pressure Map is a structural context tool that measures how tightly price is compressing against the nearest pivot-based level, and evaluates two behavioral scenarios in parallel: breakout anticipation and reversal watch. The output is a visual map of where pressure is accumulating — rendered as an evolving pressure zone that moves through BUILDING, ARMED and READY states.
This is not a signal engine, not a forecast, and not a trading strategy. It is a visualization layer that answers a single question: where is compression building around the active level, and in which direction is that pressure leaning.
🧭 Unique Edge
────────────────────────────────────────
Most compression indicators reduce behavior to a single direction. CPM separates compression into two parallel scoring engines that run on the same structural core:
🔹 Breakout Anticipation — pressure building for a directional break through the level
🔹 Reversal Watch — pressure building for a rejection at the level
In Auto mode the dominant scenario is rendered on the chart (cleaner visual), while the panel shows both scores side by side for transparency. Power users can lock the engine to a single mode. The active level is stabilized with a clustered pivot refinement and a drift-control lock, so the displayed level stays consistent instead of jumping on every new pivot. A compression gate keeps the pressure score aligned with the compression core: when compression is weak, pressure cannot escalate into high states.
🧪 Methodology
────────────────────────────────────────
The pressure score is a weighted composite of six structural components, measured on the active scenario:
🔹 Range compression (short-window range vs long-window range)
🔹 ATR compression (short-window ATR vs long-window ATR)
🔹 Body tightness (average body size relative to average range)
🔹 Quiet-bar persistence (how many recent bars qualify as calm)
🔹 Proximity to the active level (normalized by ATR)
🔹 Directional posture (slope, close position in bar)
Reversal scoring adds wick-rejection weight at the active level (average lower-wick size for bull reversals, upper-wick size for bear reversals). Breakout scoring adds approach slope weight toward the active level. A shared EMA smoothing step produces calmer state transitions. A dominance margin and cooldown prevent rapid scenario flipping. The final score is driven through a BUILDING → ARMED → READY state machine with hysteresis on the zone visibility to avoid flicker.
🎯 Signals & Alerts
────────────────────────────────────────
The state machine produces four transition alerts plus two pace alerts:
🔹 Pressure Armed Near Level — score crosses the armed threshold with an active scenario
🔹 Ready Zone Reached — score crosses the ready threshold with an active scenario
🔹 Armed Bullish / Bearish Scenario — directional armed transitions
🔹 Ready Bullish / Bearish Scenario — directional ready transitions
🔹 Pressure Rising — score is climbing while the zone is live
🔹 Pressure Released — the active scenario resolves (through the level or by decay)
On the chart, state transitions are marked with discrete A and R markers on the active side. A score label near price always shows the current pressure value, bias and state for quick reading without opening the panel.
⚙️ Key Inputs
────────────────────────────────────────
🔹 Engine Mode — Auto, Breakout Anticipation, or Reversal Watch
🔹 Compression Length — main lookback for range, ATR and body tightening
🔹 Trigger Distance (ATR) — how close price must be to a level to start evaluating
🔹 Hold Distance (ATR) — how far price can drift before the active context is cleared
🔹 Pivot Left/Right and Cluster Tolerance — pivot strength and blending behavior
🔹 Compression Gate and Gate Threshold — compression-first discipline control
🔹 Armed / Ready / Zone On / Zone Off Thresholds — state machine calibration
🔹 Full visual controls — zone width, band extend, line width, label size, panel position and font
All defaults are tuned for mid-volatility crypto pairs on 1H and 4H timeframes, but the engine adapts across symbols and timeframes through its ATR-normalized distance logic.
📘 How to Use
────────────────────────────────────────
🔹 Open the indicator in Auto mode and observe which scenario the panel highlights
🔹 Wait for the pressure zone to appear on the chart (BUILD → LIVE transition)
🔹 Read the state: BUILDING means the setup is forming, ARMED means the setup is mature, READY means compression and proximity are both at peak
🔹 Cross-reference with your own structural read — CPM describes the compression landscape, the decision is yours
🔹 If you prefer one behavioral lens only, lock the engine to Breakout Anticipation or Reversal Watch
🔹 Use the Compression Gate to enforce compression-first discipline — when compression is weak, the pressure score stays in WATCH
🔹 The tool is timeframe-agnostic; try it on 15m, 1H, 4H and 1D to see how compression contexts nest
CPM is designed to sit alongside your strategy, not replace it. It maps the compression field; you read the context.
⚠️ Limitations & Transparency
────────────────────────────────────────
🔹 CPM is a context visualization tool, not a signal generator — it does not issue buy or sell calls
🔹 The pressure score is a structural measurement, not a probability estimate
🔹 State transitions describe the compression field at the moment they print; they do not imply what happens next
🔹 Active level refinement is intentionally conservative — the level may feel slower to update than raw pivots, by design
🔹 Very high volatility regimes may keep the compression score low for extended periods, which is the intended behavior
🔹 The tool is deterministic on closed bars; intrabar values are provisional until bar close
CPM is released as Public, Open-source under MPL 2.0. The source is fully readable and auditable.
🛡️ Risk Disclosure
────────────────────────────────────────
This indicator is published for educational and analytical purposes only. It is not financial advice, not a trading strategy, and not a recommendation to buy or sell any asset. Past behavior of any level or pressure state does not predict future behavior. Markets carry risk of loss; users are solely responsible for their own decisions and risk management. Always do your own research and consider consulting a qualified professional before making trading or investment decisions. Indicator
Fixed Range Control Box [AGPro Series]Fixed Range Control Box
🔹 Overview
Fixed Range Control Box isolates a single high-conviction price range on your chart and classifies who is in control inside it. The tool draws one clean hero box around the most recent structural range, places a volume-weighted Control Line inside it, and tracks state transitions in real time: Inside, Upper, Lower, or Failed. When price structurally breaks the box, the range freezes, locking the reference so you can study the aftermath without visual drift.
Four range-definition modes are available — Pivot, Lookback, Compression, and Manual-Date — so the tool adapts to discretionary range traders, systematic rotation traders, and anyone who wants a fixed reference zone for backtesting or journaling.
🔸 Unique Edge
Most range tools on PulseWire draw many boxes and leave the user to guess which one matters. Fixed Range Control Box is built around a different philosophy: one range, one story, one decision. The hero box is the visual focus; historical ranges fade into the background; the Control Line tells you which side of the range is winning the statistical argument.
Three design choices separate this from standard range-box scripts:
- Volume-weighted Control Line. Rather than dropping a midpoint line, the Control Line is computed from the volume-weighted typical price across the life of the range, with an edge-fallback to midpoint if the line drifts too close to either boundary. This produces a structurally meaningful reference instead of a geometric one.
- Retrospective fill on range rebuild. When a new range is committed, the script walks back through the range window and retroactively computes touch count, hold quality, and the Control Line. You see a fully-formed box with accurate statistics the moment it appears, not an empty box that slowly populates.
- Freeze-on-failure. When price closes beyond the range and the state transitions to Failed, the box locks at the break bar. No more drifting endpoints on broken structures — the reference stays where the story ended.
🔷 Methodology
The script cycles through four stages on every bar:
1. Range detection. Depending on the selected mode, the script looks for a qualifying range: confirmed swing pivots (Pivot), rolling highest/lowest (Lookback), short-ATR over long-ATR compression (Compression), or a user-defined date window (Manual). Gating rules — minimum lifespan, minimum width percentage, and a failed-state cooldown — prevent rapid re-triggers on noisy conditions.
2. Commit and retrospective fill. Once a range qualifies, the script snapshots the old range into history, installs the new one, and walks back through the window to compute the Control Line, touch count, and hold quality in a single pass. No warm-up period.
3. State machine. Each confirmed bar feeds the state machine. Strict logic requires bar closes on one side of the Control Line for the configured number of bars before switching to Upper or Lower; a close beyond either range boundary transitions to Failed.
4. Rendering. On the last bar, the hero box, Control Line, origin marker, and state badge are rebuilt from scratch. Historical ranges persist as muted boxes up to a configurable cap.
🔶 Signals & Alerts
Three alert conditions cover the full range lifecycle:
- New Control Box. Fires once per bar close when a new range is committed.
- Line Reclaimed (Bull or Bear). Fires when state transitions into Upper or Lower control, confirming directional bias inside the range.
- Control Failed. Fires once when price closes beyond the range and the box is frozen.
All alerts use alert() calls with once-per-bar-close frequency.
🔹 Key Inputs
- Range Mode — Auto-Pivot, Auto-Lookback, Auto-Compression, or Manual-Date.
- Pivot Length / Lookback Bars / Compression Window — window controls for each detection mode.
- Min Range Lifespan / Min Range Width % — structural filters to suppress micro-ranges.
- Failed Cooldown — bars to wait after a broken range before searching for a new one.
- Strict Control Logic + Reclaim Confirmation — governs how the Control Line state machine transitions.
- Visual controls — fade old boxes, max boxes kept, show state badge, show range origin, future projection bars, panel and label font sizes.
🔸 How to Use
1. Start on your primary timeframe and select the Range Mode that matches your style: Pivot for discretionary swing structures, Lookback for mechanical windows, Compression for auto-locking onto consolidations, Manual-Date for backtesting a specific episode.
2. Tune Min Range Width % and Min Range Lifespan so only structurally meaningful ranges appear.
3. Read the panel top-down: Mode confirms what you are tracking, Control tells you which side of the Control Line is winning, Range Age and Touches describe maturity and confluence, Hold Quality summarizes how cleanly price has respected the range, and State shows the live classification.
4. Use alerts to monitor the range lifecycle without staring at the chart.
🔻 Limitations & Transparency
- This is an analytical tool, not a strategy. It does not generate buy or sell recommendations and does not compute entries, stops, or targets.
- Past range behavior does not forecast future range behavior. Structural breaks can occur at any time.
- In very thin or illiquid markets, the volume-weighted Control Line can drift toward a boundary; the edge-fallback defaults to midpoint to protect against degenerate cases.
- Auto-Compression mode requires sufficient ATR history; expect a warm-up period on very recent symbols.
- The script is overlay-only and does not access other timeframes.
🔶 Risk Disclosure
Nothing in this script constitutes financial advice. Trading involves substantial risk of loss and is not suitable for every investor. Always do your own research and manage risk appropriately. Indicator
ES Breakout Toolkit Consolidation Range Detector Free=== PART OF THE ES BREAKOUT TOOLKIT ===
This is one of several free, standalone indicators that make up the ES Breakout Toolkit series. Each indicator isolates a single component used in the full ES London Breakout Pro strategy. They are designed to be useful on their own and educational for traders studying consolidation and breakout mechanics on ES futures.
=== WHAT THIS INDICATOR DOES ===
The Consolidation Range Detector identifies periods where price is compressing into a defined range that meets specific quality criteria. It draws a box around the consolidation zone when the range is tight relative to its recent average and falls within acceptable ATR bounds — not too small to be noise, not too large to be a trend already in motion.
When price exits a valid consolidation range, the indicator marks the breakout direction with an arrow. A label at the end of each range shows the range size in points and as a multiple of ATR, giving you context on the quality of the setup.
=== HOW TO USE IT ===
Apply this to an ES futures chart on a 5-minute timeframe. The indicator will automatically detect and draw consolidation boxes when conditions are met. You can adjust the range lookback period, tightness filter, and ATR bounds in the inputs to match your preference.
The key readings to watch are the Range/ATR ratio and the Range vs Average ratio in the dashboard. A range that is small relative to ATR and below its own recent average is a higher-quality consolidation — it means price is compressing more than usual, which often precedes a directional move.
An optional session filter limits detection to the London session (12AM-6AM PT) if you only want to see consolidations during that window.
=== KEY FEATURES ===
- Automatic consolidation zone detection with visual boxes
- Tightness filter comparing current range to rolling average
- ATR-based minimum and maximum range bounds
- Breakout direction arrows when price exits a valid range
- Range size labels in points and ATR multiples
- Optional London session filter
- Dashboard with real-time range quality metrics
- Alerts for consolidation detection and breakout events
=== ABOUT THE ES BREAKOUT TOOLKIT ===
This indicator is part of a free series that breaks down the building blocks of a London session ES futures breakout strategy. Other free indicators in the series cover session highlighting, ADX regime filtering, breakout candle scanning, and momentum close analysis. Each is published separately on my profile.
The full ES London Breakout Pro indicator combines all of these components into a unified strategy with additional proprietary features including advanced risk management, trade qualification, and data tracking. It is available as an invite-only script on my profile. Use the access request instructions on that script's page if you are interested.
=== DISCLAIMER ===
This indicator is provided for educational and informational purposes only. It is NOT financial advice. It does not constitute a recommendation to buy, sell, or hold any financial instrument. Trading futures involves substantial risk of loss and is not suitable for all investors. Past performance of any indicator or strategy is not indicative of future results. Always conduct your own research and consult a qualified financial advisor before making any trading decisions. You are solely responsible for your own trading activity. Indicator
AG Pro Consolidation Breakout Quality [AGPro Series]AG Pro Consolidation Breakout Quality
Overview / What it does
AG Pro Consolidation Breakout Quality is an overlay tool designed to detect compression zones and evaluate the quality of the breakout that emerges from them. Instead of marking every simple range expansion, the script first looks for a valid consolidation structure, then measures how convincing the breakout is once price closes outside the box.
The core idea is straightforward: not every breakout from a tight range carries the same informational value. Some breaks occur with weak commitment, low participation, and immediate failure. Others show stronger intent through better candle structure, stronger relative volume, longer pre-break compression, and cleaner continuation behavior. This script is built to separate those conditions visually and systematically.
The indicator automatically identifies consolidation zones using a narrow-range logic relative to ATR. When a valid box forms, the structure is drawn on the chart. If price closes beyond the upper or lower edge of that box, the script registers a breakout or breakdown and assigns a quality score. A throwback event can also be tracked after the break, helping users distinguish cleaner expansions from breaks that immediately revisit the zone.
This makes the script useful for traders who want to monitor compression-to-expansion behavior in a structured way. It can be used to review developing ranges, compare breakout quality across instruments, and filter visual attention toward stronger or weaker breakout events without turning the chart into a cluttered signal feed.
Unique Edge
The differentiating idea behind this tool is that it does not treat consolidation and breakout as two unrelated events. It treats them as one sequence: compression, release, validation, and possible throwback. That sequence is then scored.
Many breakout tools only draw a box or mark the first candle that moves outside a recent range. This script adds a second layer by evaluating the break itself. Volume participation, the strength of the closing position, the duration of the consolidation, and the efficiency of the breakout candle all contribute to the final quality read. If price quickly throws back into the prior box, that weakness is also reflected.
This makes the script a natural sibling to AG Pro Break-Retest Quality, but it is not a duplicate. Break-Retest Quality focuses on retest behavior after a level break. Consolidation Breakout Quality begins one step earlier by focusing on the compression box itself, the first breakout from that structure, and the immediate integrity of that release. The emphasis here is the quality of expansion from consolidation, not the later retest workflow.
Methodology
1) Consolidation detection
The script scans for a sequence of relatively narrow bars. Narrowness is measured against ATR, so the detection logic adapts to the volatility environment of the symbol rather than relying on a fixed tick or percentage threshold. Once the required number of bars is reached, a consolidation box is formed from the local high-low range of that sequence.
2) Breakout / breakdown detection
A bullish breakout is registered when price closes above the upper boundary of the active consolidation box. A bearish breakdown is registered when price closes below the lower boundary. The breakout level is then projected forward visually so the user can continue tracking the structure after the event.
3) Quality scoring
The script assigns a 1 to 5 quality score using a weighted ruleset built around the breakout event:
- Base breakout occurrence
- Relative volume expansion compared with a volume moving average
- Strength of the close beyond the box boundary
- Duration of the consolidation before release
- Body efficiency of the breakout candle
4) Throwback context
After the breakout, the script can monitor whether price returns back into the broken consolidation box within a user-defined lookback window. This is treated as a sign of weaker follow-through and can be displayed directly on the chart for fast context reading.
5) Visual workflow
The chart uses a structured visual hierarchy:
- Consolidation box
- Breakout or breakdown label
- Throwback warning label
- Quality score card
- Breakout level projection
- Compact info panel
The goal is to keep the workflow readable while preserving enough structure for live chart use.
Signals & Alerts
The script can generate alerts for:
- Bullish breakout
- Bearish breakdown
- High-quality breakout conditions
- Elite-quality breakout conditions
- Throwback warning
- Any breakout event
This allows the tool to be used either as a visual chart companion or as part of a broader alert-driven workflow. Users who prefer stricter confirmation logic should configure alerts in a way that matches their execution style.
Key Inputs
Consolidation Settings
- Consolidation Length: number of bars required to form a valid consolidation
- ATR Multiplier: sensitivity threshold for narrow-range detection
- ATR Length: volatility lookback
- Max Zones to Display: keeps chart objects under control
Quality Scoring
- Volume Spike toggle
- Volume MA Length
- Volume Spike Multiplier
- Close Position scoring toggle
- Throwback monitoring toggle
- Throwback lookback length
Visual Settings
- Box color
- Bullish breakout color
- Bearish breakdown color
- Throwback color
- Box, level, score, arrow, and panel visibility
- Label size controls
Alerts
- Minimum score threshold for alert relevance
Limitations & Transparency
This script is a market-structure visualization and event-quality tool. It is not a prediction engine, and it does not claim that every high score will lead to continuation or that every low score will fail. The score is a structured summary of selected breakout characteristics, not a guarantee of outcome.
Consolidation detection depends on the selected ATR settings and bar count. Different symbols, sessions, and timeframes may require different parameter values. Users should expect the frequency and strictness of the boxes to change when those settings are adjusted.
Volume-based logic may be more informative on instruments and venues where reported volume is meaningful. On some markets, volume behavior can be less consistent, which may reduce the usefulness of the volume component.
Throwback detection is intended as context, not as a complete post-break trade management model. A throwback can represent weakness, but in some workflows it may also represent a later confirmation opportunity. The script leaves that interpretation to the user.
Risk Disclosure
This indicator is for chart analysis, structure review, and breakout context evaluation only. It does not provide financial advice, investment recommendations, or guaranteed trade outcomes. All trading and investing involve risk, including the risk of loss. Users should evaluate the tool on their own symbols, timeframes, and execution rules before relying on it in live decision-making.
Indicator
Scalper Pro 3 Min GoldDesigned specifically for low-timeframe scalping (ideal for 1m and 3m charts, especially on XAUUSD/Gold), the Scalper Pro 3 Min Gold is an advanced market structure breakout indicator that filters out market noise to catch explosive momentum.
Instead of giving a signal at every minor high/low cross, this script uses strict logic to ensure you only enter high-probability setups. It automatically calculates your risk and visualizes the exact Entry, Stop Loss, and Take Profit zones directly on your chart.
Key Features:
Smart Structure Breakouts: Uses internal Pivot High/Low calculations to identify true Market Structure Shifts (MSS). Stop losses are dynamically placed at the most recent logical swing low/high, not just the previous candle wick.
Consolidation Filter (Anti-Chop): The indicator analyzes the recent ATR. It requires the price to be in a tight accumulation/consolidation zone before a breakout occurs. This keeps you out of choppy, sideways markets and fakeouts.
Cooldown System: Prevents overtrading. After a valid signal is fired, the indicator enters a customizable "cooldown" period where it ignores erratic back-to-back signals.
Auto Risk:Reward Projection: Instantly draws professional Stop Loss (Red) and Target (Teal) boxes with clean labels based on your selected R:R multiplier (Default is 1:2).
How to Use:
Apply to a 1-minute or 3-minute chart (Highly optimized for Gold).
Wait for the indicator to draw the Entry/Target boxes.
The Stop Loss is automatically placed at the safest structural pivot. Execute your trade and let the price run to the projected Teal target zone.
Fully customizable inputs allow you to adjust the R:R ratio, consolidation strictness, and cooldown length to fit your personal scalping strategy. Indicator
ROC Regime Filter [HYPR-run]DESCRIPTION:
A reliable universal regime filter across all assets, all timeframes. Rate of change filter that classifies price action into regime states. A suite of smoothed EMAs feeds a layered ROC engine that detects when fast momentum aligns with, or diverges from, slow structure. The filter measures; it doesn't predict. When all ROC layers stack in the same direction (parallel alignment), the trend is confirmed by arithmetic. When fast ROC diverges from slow, the regime shifts. The lag is the cost of certainty. Sweet spot is 1hr to 1D; lower timeframes get noisy.
DISCOVERING EDGE
In order to gain a persistent, mechanical edge in which trades are permitted and which are filtered out, we explored a more meaningful expression of regime classification using layered multiple ROC periods to detect when fast momentum aligns with or diverges from slow structure. This resilient regime filter has been the backbone for our automated strategies since 2021.
LAYERED ROC vs SINGLE-INDICATOR REGIME
A single RSI or ADX reading flattens the market into binary (trending/not trending). Layered ROC alignment separates six distinct states, each with different permissible trade types, so the filter matches the complexity of what the market is actually doing. Six regime states gate every decision; the combination of regime color + ROC slope is the trade filter, not either one alone. Phase transitions (green to yellow, orange to green) are the actionable signals; static states just confirm what's already happening. Webhook alerts fire on macro pivots (accumulation/distribution inflections) at the regime transition, not after the move has run.
FEATURES
- Six regime states from layered ROC alignment (see color legend below)
- Early trend detection when all layers accelerate in parallel
- ROC 200 line with regime-colored gradient fill
- Macro pivot detection: strong trend exhausting into sideways, scored by where ROC 200 sits relative to its all-time range
- Accumulation/distribution context in dashboard
- ROC 200 pivot high/low divergence markers on main chart
- Consolidation markers with conviction scoring (normal vs extreme)
- Gradient candle overlay (ROC Sticks; toggle on/off)
- Two-row dashboard: row 1 = macro context (accumulation/distribution), row 2 = current regime state with directional qualifier and slope
- Dashboard dark/light theme toggle for any chart background
- Full ROC stack in data window for manual analysis
- Webhook alerts on macro pivots (accumulation/distribution)
HOW IT WORKS
ROC alignment is the core signal. When all layers stack in the same direction, that's strong trend territory (green). When fast ROC diverges from the slower layers while slow structure still holds, the engine reclassifies from strong trend to sideways (yellow), flagging a pullback rather than trend failure. Deeper corrections where intermediate layers fall below the structural anchor fire orange, indicating a correction within the primary trend. Macro pivots fire at the inflection: strong trend exhausting into sideways for the first time. The consolidation score layers this with where ROC 200 sits in its all-time range. Consolidation at extreme ROC readings (bright green/red dots) is the highest-conviction signal for reversal.
HOW TO USE
Read the regime color, not the price. Green = strong trend long, red = strong trend short, orange = deeper correction, yellow = short pullback, white = directionless. Use regimes as a directional gate: longs during green, shorts during red. Yellow flags a pullback within trend; wait for resolution back to green/red before re-entering. Orange is a deeper correction; patience or fade with confirmation from other tools. The highest-edge signals come from regime transitions, not static states. Watch for: green breaking into yellow (macro pivot, potential reversal), extended yellow resolving back to green (continuation re-entry), and the ROC slope within a regime (slope rising in orange = trend about to resume). The data window shows the full ROC stack across all layers. When fast ROC diverges from slow, that signals continuation or reversion.
MACRO CONTEXT (Dashboard Row 1)
REGIME COLOR LEGEND (Dashboard Row 2)
ALERTS
Macro pivot long fires when accumulation is detected (bull inflection). Macro pivot short fires when distribution is detected (bear inflection). Create alert: condition = this indicator, "Any alert() function call". Paste your webhook URL, set Open-ended, create. Alert payload is built into the script; works with any webhook receiver.
CREDITS
Advance/Decline gradient function: LucF Indicator
AlphaX Consolidation Engine Squeeze Detection Breakout SignalsAlphaX Consolidation Engine — Squeeze Detection, Breakout Signals & Range Intelligence
AlphaX Consolidation Engine is a professional-grade volatility and range analysis system built on a proprietary 5-Factor Consolidation Scoring engine. It identifies low-volatility compression zones, tracks range boundaries in real-time, and delivers high-probability breakout signals governed by institutional-grade confluence filters. Designed for traders who want to capture explosive moves after periods of market calm on instruments like XAUUSD, indices, and forex majors.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📸 Visual Overview
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔬 The Consolidation Engine — How It Works
At the core of AlphaX Consolidation Engine is the 5-Factor Consolidation Score — a proprietary composite metric calculated on every bar to determine if the market is truly compressing or just moving sideways. It evaluates five independent volatility and trend factors:
ATR Percentile — Measures if current volatility is historically low compared to recent price action
Bollinger Band Width — Detects price compression via narrowing band width percentiles
TTM Squeeze — Confirms energy building when Bollinger Bands sit inside Keltner Channels
Linear Regression Slope — Mathematically confirms flat price movement (lack of directional bias)
ADX Filter — Validates the absence of a strong trend (ranging market confirmation)
Each factor contributes to a score from 0 to 100. When the score exceeds the threshold (default 50), the market is marked as Consolidating .
The system then tracks the Active Range — the high and low boundaries established during the consolidation period. This range is visually displayed as a shaded box with dotted boundary lines.
Consolidation Zone expanding as price compresses — darker shading indicates higher confidence
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 Four Signal Layers
AlphaX Consolidation Engine produces four distinct types of signals, each with a specific role in the trade lifecycle:
1 ─ Consolidation Zones (Shaded Boxes)
Shaded boxes with dashed borders marking confirmed consolidation areas
These are not entry signals but context markers . When a box appears, it tells you the market is building energy. The box expands dynamically as the range widens during compression. When the box border changes color (Green for Bull, Red for Bear), it indicates a breakout has occurred.
Green Box — Bullish consolidation context
Red Box — Bearish consolidation context
Gray/Neutral — Forming or weak consolidation
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
2 ─ Breakout Labels ( ▲ / ▼ )
www.pulsewire.com
Primary breakout labels appearing when price escapes the consolidation range with confidence
These are the primary entry signals . A label appears when price closes beyond the range boundary with sufficient momentum and volume.
How the breakout is detected:
Price closes beyond Range High/Low + ATR Threshold
Candle body is strong (no weak wicks)
Volume confirms the move (optional filter)
Confidence Score meets minimum threshold
Once a breakout label fires, it sets the directional bias . The system then switches from "Range Tracking" mode to "Trend Follow" mode for that specific setup.
▲ Green Label (Bull Breakout) — Dark text on bright green background for maximum readability
▼ Red Label (Bear Breakout) — White text on deep red background for maximum readability
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
3 ─ Retest Entries ( ▲ RETEST / ▼ RETEST )
Secondary entry signals appearing when price pulls back to the breakout level and holds
Breakouts often fake out before continuing. The Retest Engine monitors for price returning to the breakout level (old range high/low) within a configurable window.
▲ RETEST (Teal) — Price pulled back to bull breakout level, held support, and confirmed with bullish candle
▼ RETEST (Light Red) — Price rallied back to bear breakout level, rejected resistance, and confirmed with bearish candle
Retest signals often offer better risk-to-reward than the initial breakout because the stop loss can be placed tighter around the retest candle.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
4 ─ Exit Markers ( ✕ )
Small X marks indicating where the system detects trend exhaustion or reversal — time to consider taking profit
Exit signals appear as small marks and fire only after an entry has occurred. This prevents premature exit markers from cluttering the chart during strong trends.
TRAIL — Price hit the dynamic ATR trailing stop
FAILED — Price re-entered the original consolidation range (failed breakout)
FLIP — Opposite breakout signal fired (trend reversal)
Exit markers indicate that the trade thesis is no longer valid . Use them to close positions or tighten stops manually.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🧠 Multi-Confluence Confidence Scoring
Every breakout signal is scored by a real-time confidence engine that evaluates multiple independent factors and produces a score from 0 to 100. Only signals meeting your configured Min Breakout Confidence % threshold are displayed.
The scoring factors include:
Squeeze Quality (up to 20 points)
Was the TTM Squeeze active immediately before breakout?
Higher scores for breaks occurring after prolonged squeeze conditions
Consolidation Quality (up to 15 points)
How high was the 5-Factor Consolidation Score during the range?
Scores higher for "Extreme" or "Strong" consolidation zones vs "Weak" ones
Duration Bonus (up to 10 points)
Longer consolidation periods typically yield stronger breakouts
Scores increase for ranges lasting >15 bars
Volume Confirmation (up to 15 points)
Volume on the breakout bar relative to the 20-bar average
Volume bias during consolidation (Accumulation vs Distribution) adds/subtracts points
Momentum Alignment (up to 17 points)
MACD Histogram direction and strength
EMA Alignment (Fast vs Slow)
RSI position (not overextended)
Candle Quality (up to 5 points)
Body-to-range ratio of the breakout candle
Strong bodies score higher than wicky candles
Penalty Deductions
RSI overextension (already too high/low) — up to -8 points
Contradicting Volume Bias — up to -12 points
EMA against trend — up to -5 points
The default minimum confidence is set to 35% — optimized to filter noise while capturing valid setups. Increase to 50–60% for higher probability but fewer signals.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🛡 Range Intelligence & Volume Bias
Understanding what happened inside the range is key to predicting the breakout direction. AlphaX Consolidation Engine tracks volume flow during consolidation:
Accumulation — More bullish volume during consolidation suggests upward breakout probability
Distribution — More bearish volume during consolidation suggests downward breakout probability
Neutral — Balanced volume suggests a wait-and-see approach
This bias is factored into the Confidence Score. A bullish breakout with bearish accumulation bias receives a penalty, reducing the likelihood of a false signal.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠ Identifying Choppy / Ranging Markets — When NOT to Trade
Knowing when to stay out is just as important as knowing when to enter. AlphaX Consolidation Engine is designed to help you identify the chop so you can trade the break.
How to identify low-probability conditions:
No Consolidation Box — If the 5-Factor Score never reaches threshold, the market is too noisy. No box = no edge.
Low Confidence Scores — If breakout labels rarely appear, the market lacks directional conviction.
Frequent "FAILED" Exits — If multiple breakouts immediately re-enter the range, the market is still ranging despite brief spikes.
Dashboard Shows "NEUTRAL" — If Vol Bias and Momentum are conflicting, wait for clarity.
What to do during low-confidence periods:
Do not force entries — wait for the Consolidation Score to rise
Wait for the Confidence Score on the breakout label to exceed 50%
Look for the Retest signal instead of the initial breakout for better confirmation
Consider switching to a higher timeframe to find the broader range structure
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📐 Dashboard Intelligence
A comprehensive dashboard provides real-time metrics at a glance:
Consol Score — Current 5-Factor score (0-100) and intensity (Weak/Mod/Strong/Extreme)
State — Active, Forming, or None
TTM Squeeze — Status and bar count
Range Info — High/Low levels, Width in ATR, Price Position %
Vol Bias — Accumulation vs Distribution percentage
Momentum — RSI, MACD, EMA Trend status
Breakout Conf — Current Bull/Bear confidence scores and tiers (S/A/B)
Trade Status — Position direction and Open P&L
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🚀 How to Trade with AlphaX Consolidation Engine — Step by Step
Step 1 — Identify Consolidation
Wait for a shaded Consolidation Box to appear
Check the Dashboard: Is Consol Score > 50? Is Squeeze ON?
If no box → do not trade. Wait for compression.
Step 2 — Wait for Breakout Label
A Green ▲ or Red ▼ label appears when price escapes the box
Check the Confidence % on the label (e.g., "A 65%")
If confidence is below your minimum → wait.
www.pulsewire.com
Complete trade flow: Consolidation Box → Breakout Label → Retest → Exit
Step 3 — Enter on Breakout or Retest
Aggressive: Enter on the Breakout Label close
Conservative: Wait for the RETEST label after the breakout
Place stop loss below the breakout candle or opposite side of the range
Step 4 — Manage with Trailing Stop
The system plots a dynamic trailing stop line (stepped line)
Stay in the trade as long as price does not cross the line
Add to position on additional Retest signals if trend is strong
Step 5 — Exit on Signal
When a ✕ mark appears, the system detects exhaustion or reversal
Close position or tighten stop manually
Wait for the next Consolidation Box to form for the next cycle
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚡ Key Features
🔬 Proprietary 5-Factor Consolidation Scoring (ATR, BB, KC, LR, ADX)
☁ Dynamic shaded consolidation zones with auto-expanding boundaries
🏷 Confidence-scored breakout labels (S/A/B Tier) with readable text colors
▲▼ High-probability retest entries after breakout confirmation
✕ Smart exit markers (Trail/Failed/Flip) to protect profits
🧠 Multi-factor confidence scoring — squeeze, volume, momentum, candle quality
📊 Volume Bias Analysis — tracks accumulation vs distribution inside ranges
📈 Comprehensive Dashboard — real-time range, momentum, and trade stats
🎨 Cohesive dual-tone color theme — Green for bull, Red for bear, Gray for neutral
🔔 15+ alert conditions — consolidation, squeeze, breakouts, retests, and exits
⚙ Fully configurable — all scoring weights, thresholds, and visuals adjustable
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚙ Settings Reference
Consolidation Detection
ATR / BB / KC Periods — Core volatility calculation lengths
Squeeze Percentile — Threshold for defining "low volatility"
Min Consolidation Bars — Minimum bars required to confirm a range
LR Slope Threshold — Sensitivity for detecting flat price action
Breakout Settings
Breakout ATR Threshold — How far price must close beyond range
Breakout Volume Ratio — Minimum volume required on breakout bar
Min Breakout Confidence % — Filter for signal quality (Default 35%)
Require Close Beyond Range — Prevents wick fake-outs
Momentum Confirmation
RSI / MACD / EMA Periods — Used for confidence scoring
RSI Levels — Overbought/Oversold thresholds for scoring penalties
Exits
Trailing Stop ATR Multiple — Distance for dynamic stop loss
Exit on Re-Enter Range — Close trade if price falls back into consolidation
Exit on Opposite Breakout — Close trade if reverse breakout occurs
Appearance & Dashboard
Show Consolidation Zones / Lines / Dots — Toggle visual elements
Label Size / Dashboard Text — Adjust readability
Colors — Fully customizable bull/bear/neutral palette
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔔 Alert Conditions
Consolidation Detected — Fires when a new range is confirmed
Squeeze Activated / Released — TTM Squeeze state changes
Extreme Squeeze — Consolidation Score > 80
S/A/B-Tier Bull/Bear Breakout — Confidence-based breakout alerts
Bull/Bear Retest Entry — Pullback entry signals
Any Exit — Trail, Failed, or Flip exit signals
All alert messages include {{ticker}} and {{interval}} placeholders for clean webhook integration.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 Default Settings — Optimized For
The default configuration is specifically tuned for XAUUSD (Gold) and Major Indices on the 5-minute timeframe :
Confidence threshold at 35% filters out low-quality noise while keeping valid setups
ATR and BB periods calibrated for intraday volatility profiles
Volume filters enabled to prevent low-liquidity fakeouts
Trailing stop set to 2.0 ATR for breathable trend following
For other instruments or timeframes, adjust:
Higher timeframes (1H, 4H) — Increase Min Confidence to 45–55%, increase ATR periods
Forex majors — Reduce Min Confidence to 25–30%, enable Strict Volume Filters
Crypto — Increase ATR Thresholds (higher volatility), increase Trailing Stop multiple
Less noise — Increase Min Confidence %, Increase Min Consolidation Bars
More signals — Decrease Min Confidence %, Disable Volume Filters
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
👥 Who This Is For
🥇 Breakout Traders — Specifically designed to capture volatility expansions after compression
📉 Range Traders — Visual boxes help identify support/resistance boundaries clearly
📊 Index & Gold Traders — Tuned for assets with distinct consolidation/expansion cycles
🧠 Systematic Traders — Confidence scoring provides a quantitative framework for entry selection
📈 Traders who value clean charts — No indicator soup. Boxes, labels, and a dashboard.
⚠ Traders who struggle with choppy markets — The 5-Factor Score physically prevents signals during low-quality ranges
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📝 Notes
All calculations are non-repainting — signals are confirmed on bar close
Dashboard updates on the last bar only for performance optimization
Maximum 500 labels and 500 bars lookback are used — on very low timeframes, oldest labels may be automatically removed by PulseWire's rendering limits
Volume Bias requires volume data — may be less accurate on forex pairs without tick volume
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠ Disclaimer
This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Built for traders who demand clarity, confidence, and precision from their charts. Indicator
ADXVMA Multi-TF Overlay & Alerts [HYPR-run]DESCRIPTION:
ADXVMA across three lookback periods on one chart. A moving average that
uses the ADX (Average Directional Index) as its smoothing factor; fast in
trends, flat in chop. Price crossing above or below a selected ADXVMA
fires a webhook-ready alert for automated execution.
Based on Linnsoft's ADXvma implementation, combining Chande's Variable
Moving Average (VIDYA) with Wilder's ADX as the volatility measure. When
ADX is high (strong trend), the MA tracks price closely. When ADX is low
(choppy), the MA barely moves. This makes it naturally adaptive without
manual adjustment.
DISCOVERING EDGE
Adaptive MAs are popular (KAMA, VIDYA, DEMA), but most still treat
every directional change as a trend signal, producing false signals. This indicator adds a fuzzy factor dead zone that creates a third state, "fuzzy flat" that must exceed a noise threshold
before registering a directional change. We found the fuzzy flat signal to be a powerful signal for confirming consolidation within a trend on shorter look back periods and with the longer period for identifying ranging distribution/accumulation regimes.
Fuzzy ADXVMA vs ADXVMA
The fuzzy dead zone forces a consolidation state (yellow
flat) where a pivot or trend change would present otherwise. When the MA finally turns green or
red, it exceeds the noise floor and considered a more reliable directional
commitment, not a minor fluctuation.
- Flat duration before the cross determines signal quality; XO after
15+ bars flat = base resolved (high conviction), XO after 3 bars
flat = noise (low conviction).
- 7-tier regime gradient (D Trend at score 5 down to Potential Chop
at 0) shows the trend proving itself bar by bar across multiple
lookbacks.
- Two alert systems with multi-layer filtering (not vanilla crossovers).
Regime-confirmed fires only at early pivots. Volatility-confirmed
fires only when bar participation validates the MA shift.
FEATURES
- Three lookbacks: short, long, weekly
- Fuzzy flat detection (dead zone prevents false trend changes in chop)
- Optional ATR volatility scaling (shorter period in high-vol regimes)
- Dashboard with 7-tier regime gradient and event badge
- Two alert systems with multi-layer filtering (not vanilla crossovers)
- Regime-confirmed: price vs ADXVMA, only at early pivots (score 1-2)
- Volatility-confirmed: ADXVMA momentum shift + ATR bar expansion
- Select which lookback triggers regime-confirmed alerts
- Color-coded: green (up), red (down), yellow (flat)
- Dashboard dark/light theme toggle for any chart background
HOW IT WORKS
ADX measures trend strength on a 0-1 scale and feeds it directly into
the MA smoothing factor. High ADX = MA tracks price. Low ADX = MA holds
still. The fuzzy factor adds a dead zone so tiny movements register as
flat instead of false trend changes. Three simultaneous lookbacks give
you short-term, medium-term, and weekly context without switching charts.
DASHBOARD
Regime state at a glance. The header row shows a badge that flags
conflicting events; the second row shows the current regime label with
a 7-tier color gradient; the third row shows direction pivot events.
ALERTS
Two independent alert systems, both multi-layer filtered. Regime-confirmed:
the regime pivot is the signal; price crossing the selected ADXVMA is just
the trigger. Only fires at early pivots (score 1-2), ignoring mid-trend
crosses entirely. Volatility-confirmed: the ATR bar expansion is the
signal; the ADXVMA momentum shift is the trigger. Only fires when the bar
shows real participation (high/low extends beyond open +/- ATR), ignoring
low-range bars. Both fire JSON payloads; works with any webhook receiver.
CREDITS
ADXVMA: Linnsoft
ADX: J. Welles Wilder (1978)
VIDYA: Tushar S. Chande, TASC March 1992 Indicator
AG Pro ATR Compression Map [AGPro Series]AG Pro ATR Compression Map
Overview / What it does
AG Pro ATR Compression Map is a chart-first compression analysis tool designed to evaluate how organized a low-volatility phase is and how structurally developed that contraction has become.
Instead of treating every quiet market phase as equally meaningful, the script separates loose and unstable contraction from cleaner, more contained compression conditions. The goal is not to label every narrow range as important, but to provide a structured visual framework for monitoring whether a tightening phase is becoming more coherent and potentially worth closer attention.
The script is built for users who want to read compression quality directly on the chart without relying on overly complex dashboard-style presentation. It highlights active compression zones, assigns a normalized compression score, classifies the current state of contraction, and summarizes the condition through a compact on-chart panel.
This is intended as a context and monitoring tool. It does not attempt to forecast direction, guarantee expansion, or replace execution planning and risk management.
Unique Edge
The main idea behind this script is that low volatility alone is not enough.
Many consolidations look similar at first glance, but their internal structure can be very different. Some are noisy, unstable, and disorderly. Others become progressively tighter, cleaner, and more contained. AG Pro ATR Compression Map is designed to make that distinction clearer.
Its edge is not based on directional prediction. Instead, it evaluates compression quality through a blended framework that combines volatility contraction, local range tightening, internal noise behavior, and containment structure. This allows the script to differentiate between random quiet price action and more organized compression phases.
This also keeps the script distinct from tools that focus on breakout confirmation, retest quality, trend classification, or level-based pressure analysis. Here, the focus is narrower and more specific: measuring the quality of compression itself.
Methodology
The script combines four internal components into a unified compression score:
1) ATR contraction
Measures whether current ATR is compressed relative to its own baseline.
2) Range tightness
Measures whether the recent price range has narrowed compared with a broader reference window.
3) Noise evaluation
Evaluates whether the contraction phase is relatively clean or increasingly disordered. This includes internal bar behavior such as wick activity, directional flipping, and local overlap behavior.
4) Structural containment
Measures whether price is remaining contained within a tighter local area instead of drifting loosely inside a broad consolidation.
These components are normalized and combined into a 0-100 compression score.
The script then classifies the result into four stages:
• Loose
• Building
• Tight
• Mature
This stage logic is designed to help distinguish early contraction from more developed compression conditions. Higher states reflect more structured tightening, but not certainty of resolution.
What the script highlights
• Compression zone
A shaded chart area is displayed when compression conditions are active.
• Compression score
A compact label shows the current normalized compression score.
• State label
The current compression stage is shown directly on the chart.
• Mini panel
A small panel summarizes ATR state, range state, noise condition, containment quality, overall compression score, active state, and current compression window length.
Signals & Alerts
This script includes deterministic alert conditions for:
• Compression Active
Triggered when compression conditions become active according to the script's scoring logic.
• Compression Mature
Triggered when the current state reaches Mature.
• Compression State Change
Triggered when the internal compression state changes.
These alerts are designed to reflect state transitions inside the script's existing framework. They should be interpreted as analytical status changes, not as trade instructions.
Key Inputs
Main controls include:
• ATR Length
• Baseline Length
• Range Window
• Noise Window
• Containment Window
• Compression Threshold
• Mature Threshold
The script also includes display controls for zone visibility, labels, panel position, theme mode, text sizing, and label offset. Advanced options allow stricter filtering and additional sensitivity controls for wick behavior and close-overlap behavior.
How to read it
In practice, the script is most useful when users want to answer questions such as:
• Is this contraction still loose, or is it becoming more organized?
• Is the range tightening in a meaningful way, or is price simply drifting?
• Is the structure relatively clean, or is internal noise increasing?
• Has the compression developed enough to justify closer monitoring?
A higher compression score means the script is detecting tighter and more structured contraction conditions. A lower score suggests that the current quiet phase is still broad, unstable, or underdeveloped.
Best use cases
This script can be useful when monitoring:
• developing consolidations
• low-volatility phases inside broader trends
• pre-expansion observation zones
• structured pauses after directional movement
• markets where users want to distinguish clean compression from random inactivity
It is especially suited for traders who prefer chart-first context tools rather than signal-heavy overlays.
Limitations & Transparency
Compression can remain inactive for long periods, fail to resolve cleanly, or resolve without meaningful follow-through.
A high compression reading does not imply directional certainty, timing certainty, or inevitable expansion. Likewise, a low reading does not mean price cannot move sharply. The script measures structure quality inside contraction conditions. It does not measure certainty.
The output should be used as contextual information alongside price action, market structure, execution rules, and risk management.
What it does not do
This script does not:
• predict breakout direction
• guarantee expansion
• project targets
• replace trade planning
• function as a standalone entry engine
Risk Disclosure
For educational and analytical use only. Indicator
Indicator
Vector Logic: Macro Regime SwingVector Logic: Macro Regime Swing 🦅
Most standard moving average strategies fail because they cannot tell the difference between a true trending market and a sideways "chop zone" (accumulation/distribution). They constantly fire false 'BUY' and 'SELL' signals while the asset is just moving sideways, leading to a slow bleed of your capital.
The Vector Logic: Macro Regime Swing indicator was built to solve exactly that. Instead of just looking for trends, this script mathematically detects when a stock has fallen asleep, throws up a visual "Trap," and sits safely on the sidelines until a real breakout happens.
⚙️ How the Engine Works
This indicator combines four engines/logics to confirm a trade:
1. The Macro Trap (The Purple Lines) 🟪
The script constantly monitors the last 60 days of price action. If the asset goes just 7 days without making a new 60-day high or low, the indicator declares the stock is "chopping."
• It instantly draws a faint purple ceiling and floor on your chart.
• While the price is trapped inside this purple chop zone, all trades are strictly blocked. You sit safely on the sidelines.
2. The Trend Engine (The Blue & Orange Lines) 🌊
For a trend to be valid, the script requires structural alignment. We use a classic, robust Moving Average crossover:
• Fast Trend: 20-period EMA (Cyan)
• Slow Trend: 50-period EMA (Orange)
• The price must be aggressively crossing the 20 EMA in the direction of the trend to trigger an entry.
3. The Volume Consensus 📊
A breakout without volume is a trap. The script monitors On-Balance-Volume (OBV) in the background. A trade will only fire if institutional volume is actively pushing the price in your direction.
4. The Momentum Exit (The Yellow Dotted Line) 🟡
Getting into a trade is only half the battle; keeping your profits is the other.
Instead of waiting for the price to crash all the way back down to the 20 or 50 EMA, this script uses a rapid 10-period EMA (the dotted yellow line) as a tight trailing stop. The moment a daily candle closes on the wrong side of this yellow line, the script ruthlessly exits the trade to lock in your momentum profits.
⏱️ Adapting for Smaller Timeframes
By default, the VL Macro Regime is tuned for Daily (1D) swing trading. However, the engine is fully dynamic. When you drop down to intraday timeframes (like 1H, 15m, or 5m), keep in mind that "Days" in the settings menu translates directly to "Candles" or "Bars". If you want to trap a true macro-level chop zone on a 15-minute chart, you should increase your Historical Range Lookback (e.g., 100 to 200 bars) to capture the overarching structure of the week. For highly aggressive day trading, you can also tighten the Trend MAs (e.g., 9 and 21) to catch rapid intraday momentum breakouts before the volume fades.
💡 How to Read the Chart
• BUY / SELL Labels: A clean, confirmed breakout. The trend is aligned, volume is backing it up, and the stock has escaped the purple Macro Trap.
• EXIT Circles: The tiny grey circles tell you exactly when the price closed across the yellow 10 EMA trailing stop. Time to take your profits and step away.
• TP Flags: Subtle green flags suggest a standard 5% partial Take-Profit zone.
• The Dashboard HUD: Located in the top right, this panel gives you a real-time pulse check on the current trade status, volatility state, and volume trend.
🛠️ Built-In Failsafes
• Zero Repainting: All signals are strictly hardcoded to the candle close (barstate.isconfirmed). What you see on a closed daily candle is permanently locked in history. No flickering, no vanishing signals.
• Glitch Protection: Automatically untethers and resets itself if it encounters broken historical data or extreme anomalies (like leveraged ETF reverse splits).
Disclaimer: This script is for educational and informational purposes only. It does not constitute financial advice. Always backtest strategies and manage your own risk. Indicator
Indicator
