Auto-ATR Volatility Spike & Trend Tracker [BigBeluga]Auto-ATR Volatility Spike & Trend Tracker is an institutional-grade algorithmic trend-following terminal engineered for PulseWire. It is specifically built to isolate high-momentum breakout anomalies (spikes) from ordinary noise and anchor a dynamic, risk-managed trailing stop-loss directly to the underlying structural expansion.
By merging volumetric price momentum with an adaptive Average True Range (ATR) detection framework, this indicator completely redefines how breakout traders enter and manage trends. Instead of reacting blindly to standard moving average crosses, the system utilizes an execution state machine that locks onto systemic market expansion, tracks trend health via dynamic midpoint lines, and protects capital with a trailing protection line.
🔵 CHANNELS & ARCHITECTURAL CORE ENGINE FEATURES
1. Dual-Mode Spike Detection System
Auto ATR Volatility Engine: Automatically adapts to varying market conditions. By cross-referencing incoming candle structures against an ATR Length multiplier baseline, the indicator filters out flat consolidation periods and flags abnormal, high-liquidity volume expansions that signify true institutional participant footprints.
Fixed Percentage Breakout Mode: For traders operating in highly structured assets with predictable daily limits, this module locks onto absolute price change thresholds ( Fixed Spike Threshold % ), isolating momentum moves that pierce predefined parameters.
Wick-to-Body Range Toggle: Allows you to switch calculations to run from either the raw candle body (Open to Close) or the full extreme range ( Calculate From Wicks (High/Low) ). This isolates clean structural closes while adjusting to high-volatility liquidity sweeps.
2. Predictive Mid-Level Benchmarks & Spacing Visuals
Dynamic Mid Level Dash Lines: When a valid trend spike is verified, the engine immediately draws a horizontal midpoint line extending from the center of the candle ( Display Mid Level Dash Line ). This centerline serves as an immediate structural macro floor or ceiling; as long as price retains this boundary, the primary breakout impulse remains historically intact.
Measurement Arrow Guides & Measurement Labels: Automatically draws measurement arrow guides along with real-time text percentage indicators directly over the breakout candle ( Display Size % Labels & Arrow Lines ). This gives you instant clarity on the volatility profile without needing to use manual drawing tools.
3. Algorithmic State Machine & Trailing Protection
Volatility-Adjusted Trailing Stops: Once a breakout trend is established, the indicator deploys a step-calculated trailing line based on your Trailing ATR Multiplier . This line is engineered to trail tightly beneath bullish expansions or above bearish flushes, keeping you safely in the macro trend while mitigating downside variance.
Trend Interlock Protection: The underlying state machine features built-in trigger restrictions that lock execution while a trend is dominant. This prevents counter-trend false entries or premature reversals, keeping your focus strictly on the dominant structural path.
Theme Overwrite Candlesticks: Completely recolors the active layout chart workspace bars using vivid, customized hex-theme presets ( Bullish/Bearish Theme Colors ) the exact moment an abnormal spike is validated.
4. Persistent Macro Statistics Dashboard Matrix
Top-Right Analytics HUD Table: Instantly maps out a high-performance database grid showing critical data points from the most recent historical market expansions.
Real-Time Metrics Monitoring: Explicitly stores and displays the precise directional Spike Type , Size (%) , and exact entry execution Price for both bullish and bearish cycles, providing a reliable quantitative snapshot of the asset's structural strength.
🔵 SYSTEMATIC EXECUTION STRATEGIES & RISK INTERPRETATION
Midpoint Re-test Accumulation Plays: When a powerful up-spike forces a market breakout, do not chase the initial overextended move. Instead, wait for a constructive pullback toward the extended dynamic dashed midline. If price builds a base and prints a clean rejection candle at this level, it signals a premium, low-risk continuation entry aligned with institutional order flow.
Trailing ATR Invalidation Exits: The trailing stop-loss line acts as your absolute trend line invalidation boundary. In a powerful bullish expansion, the indicator will continuously trail and lock in accrued profit beneath the recent low points. A clean daily close crossing beneath this line confirms an official trend termination, signaling an immediate exit to protect your capital.
Breakout Sizing Divergences: Cross-reference the live metrics dashboard data to spot exhausting trends. If an asset is pressing higher but newly generated bullish spikes show smaller percentage sizes compared to the historical records on your HUD table, it exposes fading momentum—frequently warning of an impending reversal or structural distribution phase.
🔵 INTERFACE CONFIGURATION AND PARAMETERS
Detection Mode Controls: Choose between Auto ATR or Fixed % settings and specify lookback periods to customize the indicator to match any asset class, volatility cycle, or execution chart timeframe.
Visibility Filters Overrides: Independently toggle midlines, trailing stops, background cloud color fills, or measurement labels to maintain a clean, distraction-free charting interface.
Theme Personalization Modifiers: Fully adjust color properties for upward spikes, downward spikes, buy/sell arrows, and trailing lines to blend seamlessly into your dark or light workspace layout themes.
Transform your charting workspace from speculative guessing into an automated, volatility-tracked breakout environment with the Auto-ATR Volatility Spike & Trend Tracker terminal. Indicator
RVOL Candles | FALCON AIFalcon RVOL Candles — an educational volume study.
Most volume tools compare the current bar to a rolling average, which mixes the
busy market open with the quiet lunch hour and gives a distorted read. This study
does it differently: it compares each candle to the average volume at that SAME
time of day. The 9:30 bar is measured against past 9:30 bars, the 12:00 bar against
past 12:00 bars — like-for-like. That shows when a move is backed by genuine,
time-adjusted participation versus a low-liquidity drift.
How to read it:
• Extreme — volume ≥ 2× the time-of-day average (unusually heavy)
• High — volume ≥ 1.5×
• Normal — in between
• Low — volume ≤ 0.7× (quiet)
An optional top-right readout shows the live RVOL multiple and its tier.
Settings:
• Thresholds for each tier (multiples of the time-of-day average)
• Fully customizable colors
• Toggle the readout on/off
Notes:
• Works best on intraday timeframes, since it groups volume by time of day.
• Averages build as the chart loads more bars of each time slot — give it history
for a stable read.
• Chart study only: it does not place trades, does not backtest, and has no entry,
stop, target, or position-sizing logic. Your entry, your risk. Not financial advice. Indicator
Three & Four Bar Reversal PatternThree & Four Bar Reversal Pattern identifies short-term reversal candlestick setups directly on your chart, based on a strict closing-price confirmation rather than just wick penetration — making signals more reliable for intraday and swing trading decisions.
WHAT IT DETECTS
3-Bar Reversal
A classic three-candle reversal:
Bullish: two consecutive bearish candles followed by a bullish candle that closes above the high of the first bearish candle.
Bearish: two consecutive bullish candles followed by a bearish candle that closes below the low of the first bullish candle.
Requiring the close (not just the wick) to break the reference level filters out weaker, unconfirmed reversal attempts.
4-Bar Reversal (optional)
An extended version of the pattern for setups where the reversal takes one extra candle to confirm:
Two small same-direction candles, followed by a transition candle in the opposite direction, followed by a large breakout candle whose body exceeds the combined body size of the previous three candles, and whose close breaks through the high/low of the first candle.
Built-in logic prevents a 4-bar signal from overlapping with an already-completed 3-bar signal on the same candles, so you don't get redundant markers on the chart.
FEATURES
Independent toggles for bullish and bearish signals
Customizable colors for bullish/bearish markers
Optional 4-bar pattern detection, clearly distinguished from 3-bar signals with on-chart labels ("3" / "4")
Configurable reference line (style: solid/dashed/dotted, adjustable width) marking the breakout level
Built-in alert conditions for all four signal types (bullish/bearish, 3-bar/4-bar)
HOW TO USE
Add the indicator to your chart.
Watch for triangle markers below/above candles — these mark confirmed reversal closes.
Enable "4-Bar Pattern Detection" in settings if you also want the extended 4-candle version.
Set alerts on any of the four conditions to get notified in real time.
NOTES
This tool is designed to highlight potential reversal setups, not to generate standalone buy/sell signals. Always combine it with your own risk management, trend context, and confluence factors (support/resistance, volume, higher-timeframe structure, etc.). Past patterns do not guarantee future results. Indicator
Candle Pattern Forecast# Candle Pattern Forecast — Complete Guide
---
## What This Indicator Does
The Candle Pattern Forecast engine looks at the most recent candles on your chart and asks a simple question: **has the market made this same sequence of candles before, and if so, what happened next?**
Every candle tells a story beyond just where price closed. It reveals how decisive the move was (the body), whether buyers or sellers got rejected at the extremes (the wicks), and which side was in control (direction). This indicator reads those four characteristics on each of the last N candles, builds a structural fingerprint of that sequence, then scans back through history looking for every other time the market made a similar sequence.
Once it finds enough matching sequences, it looks at what price actually did in the bars that followed each match. It then plots the median of all those outcomes as a forecast midline, and draws confidence bands showing the range where the bulk of those historical outcomes actually landed.
In plain terms: **the last time the market made candles that looked like this, here is what typically happened next.**
---
## What It Is Not
This is not a crystal ball. It is not predicting the future with certainty. It is showing you a probability-weighted summary of historical behavior following similar candle patterns. The quality of that summary depends entirely on how many good matches exist in history and how consistently those matches behaved afterward. The info box tells you both of those things in real time.
---
## The Display
**Pattern Line** — a purple line tracing the closes of the Candle Lookback window. This shows you exactly which candles the engine read to build its fingerprint, ending at the anchor point where the forecast begins. When Historical Rewind is active, the pattern line shifts back with the rest of the indicator so you always see the sequence that generated the projection.
**Forecast Midline** — the median (or average, if you switch modes) of all the forward price paths observed after matched candle sequences. This is your central tendency line — where the market most commonly ended up after patterns like this.
**Confidence Bands** — the range between the 25th and 75th percentile of historical outcomes by default. The middle 50% of your matched sequences ended up inside these bands. Tight bands mean the matches behaved consistently. Wide bands mean outcomes were scattered and the pattern had no reliable follow-through.
The bands naturally widen as they extend further forward in time. This is correct behavior — the further out you project, the more historical paths diverge from each other.
---
## Inputs — Model Group
**Non-Repaint Mode** — when on, the indicator anchors itself to the last fully closed candle and never changes its projection mid-bar. This is the honest setting for real trading decisions. When off, it updates live on the current bar, which means the projection shifts as price moves.
**Candle Lookback** — how many candles back the engine reads to build its fingerprint. At 5, it reads the last 5 candles and uses their combined anatomy as the pattern it is trying to match in history. Shorter lookbacks find more matches because the fingerprint is simpler. Longer lookbacks find fewer but potentially more specific matches. For short-term intraday work, 3–7 is a practical range. Going much above 10–15 starts to starve the engine of good matches.
**Search Depth** — how far back in history the engine scans looking for matches, measured in bars. At 2000, it looks back 2000 bars. More depth gives more candidates to match against, which is generally better. The limit is how much data your chart actually has.
**Forecast Horizon** — how many bars forward the projection extends after the anchor point. At 10, you get a 10-bar forecast. Keep this in a sensible relationship to your Candle Lookback — projecting 50 bars forward on a 5-candle pattern will produce a technically valid but practically meaningless result as the historical outcomes diverge too much to average meaningfully.
**Pattern Matches** — the target number of historical matches the engine tries to collect. It starts with a very strict similarity requirement and automatically loosens it until it has found this many matches, stopping at the Similarity Floor. More matches produce a smoother, more stable midline but dilute the directional signal. Fewer matches are noisier but more specific. 15–30 is a practical range.
**Similarity Floor** — the absolute minimum similarity score the engine will accept for a match, expressed as a percentage. If it cannot find enough matches above this floor, it takes whatever it found and shows a warning in the info box. This prevents the engine from building a projection on essentially unrelated historical patterns. Raising this makes the engine more selective. Lowering it makes it more permissive.
---
## Inputs — Historical Rewind Group
**Enable Rewind** — when toggled on, the entire indicator shifts backward in time by the number of bars you specify. The fingerprint is read from that past point, the scan searches only history that existed at that time, and the projection extends forward from there — into what is now known history. This lets you visually compare what the indicator would have projected against what price actually did. The pattern line also shifts back to show the candle sequence that was read at that point in time. When off, the indicator runs live as normal.
**Bars Back** — how many bars back to anchor the rewind. At 50, the engine reads the candle sequence from 50 bars ago, finds matches from history prior to that point, and draws the projection forward from there. You can then see how closely the actual subsequent price action followed the forecast. Set to 0 when rewind is enabled but you want to temporarily pause without toggling it off.
The info box Rewind row shows **Live** when rewind is off and **⏪ N bars back** in orange when active, so it is always clear whether you are looking at a live projection or a historical replay.
---
## Inputs — Match Strictness Group
**Match Strictness** — a single dropdown from 1 (Weak) to 5 (Exact) that controls how the engine weighs the four candle anatomy dimensions against each other when measuring similarity.
- **1 — Weak** — all four dimensions (body, upper wick, lower wick, direction) matter equally. The engine is looking for a general structural resemblance. Finds the most matches.
- **2 — Relaxed** — slight emphasis on body conviction. Still broadly permissive.
- **3 — Balanced** — the default. Body size is the dominant signal but wicks and direction still contribute meaningfully.
- **4 — Strict** — strong body emphasis. The engine is primarily matching on how decisive each candle was. Fewer but structurally closer matches.
- **5 — Exact** — body conviction is the overwhelming signal. Only candle sequences with very similar body profiles will qualify. Hardest to match, fewest results.
Think of this as tuning what kind of candle similarity matters most to you. If you care primarily about whether candles were indecisive or committed, lean toward Strict or Exact. If you want a broader match that respects the full candle structure equally, use Weak or Relaxed.
---
## Inputs — Pattern Line Group
**Show Pattern Line** — toggles the pattern line on or off. Default is on.
**Color** — color of the pattern line. Default is purple.
**Width** — thickness of the pattern line. Default is 2.
---
## Inputs — Forecast Group
**Midline Mode** — controls how the central forecast line is calculated from the matched outcomes.
- **Median** (default) — takes the middle value when all outcomes are sorted. More robust to outliers. If one matched sequence had a massive move that was atypical, it gets pushed to the edge rather than pulling the midline toward it.
- **Average** — takes the arithmetic mean of all outcomes. More sensitive to outliers and extreme moves in either direction.
For most use cases Median is the more honest representation of what typically happened.
**Midline Color / Width / Style** — visual styling for the forecast midline.
**Show Confidence Bands** — toggles the upper and lower bands on or off.
**Confidence Band Mode** — controls how the bands are calculated.
- **Percentile** (default) — sorts all historical outcomes at each forecast step and draws the bands at the exact percentile you specify. No assumptions about the shape of the distribution. The bands directly show you where real historical outcomes clustered.
- **Std Deviation** — draws the bands at mean ± N standard deviations. Assumes outcomes are roughly bell-shaped. Can be distorted by outliers inflating the standard deviation even when most matches behaved similarly.
**Lower Percentile / Upper Percentile** — only active in Percentile mode. Default is 25 and 75, meaning the bands show where the middle 50% of historical outcomes landed. Moving to 10/90 widens the bands to capture 80% of outcomes. Moving to 5/95 captures 90%. The right setting depends on whether you want to see the typical range or the full plausible range.
**Band Std Deviation** — only active in Std Deviation mode. At 1.0, the bands cover approximately 68% of outcomes. At 2.0, approximately 95%.
**Upper / Lower Band Color, Width, Style** — visual styling for the confidence bands.
---
## Inputs — Info Box Group
The info box displays the engine's live diagnostic state so you always know what is actually running.
**Show Info Box** — toggles the info box on or off.
**Position** — where on the chart the info box appears.
**Text Size** — size of the info box text.
**Background / Border / Header colors** — visual styling.
---
## Reading the Info Box
**Candle Lookback** — confirms how many candles the fingerprint is built from.
**Forecast Horizon** — confirms how many bars forward the projection extends.
**Matches Used** — how many historical sequences qualified. If this is orange, no matches were found — the engine has nothing to project from. Try lowering the Similarity Floor, reducing the Candle Lookback, or increasing the Search Depth.
**Sim Floor / Fit** — two numbers. The left is the similarity threshold the engine actually settled on to reach your target match count. The right is the average similarity score of all the matches it found. Higher is better. A warning symbol next to the left number means the engine hit the Similarity Floor and could not find enough matches above it.
**Match Quality** — a composite score from Low to High that combines the average similarity of your matches, how close you got to your target match count, and whether the floor was hit. High means the engine found well-matched patterns. Low means the projection is built on weaker material and should be treated with more skepticism.
**Search Depth** — confirms the search depth setting currently active.
**Strictness** — confirms which Match Strictness level is active.
**Midline** — confirms whether you are running Median or Average.
**Bands** — confirms the active band mode and parameters. Shows either "Pctl 25/75" style or "StdDev ×1.0" style depending on your selection.
**Rewind** — shows Live when the indicator is running on the current bar, or ⏪ N bars back in orange when Historical Rewind is active.
---
## Practical Usage Tips
The forecast midline being relatively flat is not a failure — it often means the candle pattern genuinely did not predict a strong directional move historically. In that case the bands are the more useful signal, showing you the range of outcomes rather than pretending to know direction.
Tight bands with a flat midline means the pattern historically resolved with small moves in both directions — a low-conviction setup. Wide bands means the pattern was followed by large moves but in inconsistent directions. A midline with meaningful slope and tight bands is the highest-quality signal the engine can produce.
Treat Match Quality as your confidence filter. When it reads Low or Weak, reduce the weight you place on the projection. When it reads High, the engine found genuinely similar historical sequences and the projection has more structural basis behind it.
Use Historical Rewind to build intuition for the indicator before trusting it live. Step back 50 or 100 bars, observe how the projection compared to what actually happened, experiment with different Candle Lookback and Match Strictness settings, and develop a feel for when the indicator tends to be more or less reliable on your instrument and timeframe. The pattern line makes this especially useful — you can see exactly which candle sequence triggered the projection and compare it visually to where price went next. Indicator
MIDAS Fibonacci Cloud [JOAT]MIDAS Fibonacci Cloud
Introduction
MIDAS Fibonacci Cloud is an open-source VWAP-based analytical tool that combines a MIDAS-anchored volume-weighted average price with six Fibonacci-scaled standard deviation bands, a Z-score probability engine, and a synthetic order flow score to produce an integrated picture of institutional value, statistical deviation, and directional pressure on a single overlay.
The problem this solves is band relevance. Standard VWAP deviations use fixed multipliers (1×, 2×, 3× standard deviation) that carry no structural meaning in market terms. Replacing those multipliers with Fibonacci ratios (0.236, 0.382, 0.5, 0.618, 1.0, 1.618) means the band levels correspond to proportional retracement relationships that institutional participants commonly reference. The 1.618 band in particular acts as an extreme extension zone where reversion probability, quantified by the built-in Z-score engine, typically exceeds 99.7%.
Core Concepts
1. MIDAS VWAP with Configurable Anchoring
The VWAP calculation uses the MIDAS method — cumulative volume-weighted price that resets at a user-selected anchor point rather than running as a continuous session VWAP. The anchor can be set automatically (based on the current timeframe), manually to a specific higher timeframe, or to a precise date. This allows the VWAP to be anchored to any significant market event.
The variance term used for standard deviation is computed directly from the volume-weighted sum of squared prices, producing a statistically correct VWAP standard deviation:
float midasVwap = sumVolPrice / sumVol
float variance = (sumVolSq / sumVol) - math.pow(midasVwap, 2)
float stdDev = math.sqrt(math.max(0, variance))
2. Fibonacci Deviation Bands
Six band pairs are computed above and below the VWAP anchor using the standard deviation scaled by a global sensitivity multiplier and each Fibonacci ratio. Upper bands are colored in the bull theme color with decreasing opacity from band 1 to band 6; lower bands in the bear theme color with the same gradient. A gradient fill connects the outer zone (fib4–fib6) to visually highlight the extreme deviation region.
3. Z-Score and Bell Curve Probability
Each bar's Z-score is computed as the signed distance from the VWAP in units of standard deviation. The dashboard converts this to a mean-reversion probability using standard normal distribution thresholds: within 1σ = 68.2%, within 2σ = 95.4%, within 3σ = 99.7%, beyond 3σ = 99.9%.
4. Synthetic Order Flow Score
A bar-level order flow score is computed from three components: candle body-to-range ratio (directional conviction), volume relative to the 20-bar average (institutional participation), and wick rejection percentage (price acceptance or rejection). These are weighted 40/35/25 and scored 0 to 100. VWAP crossover signals are gated by this score — crossovers with low order flow scores are filtered as noise.
5. Gradient Fill Zones
The two outer Fibonacci bands (fib4 and fib6) are connected with a gradient fill that creates a visual glow effect identifying the extreme deviation zones — the regions where price is statistically most likely to be overextended.
Features
MIDAS VWAP with three anchor modes: Auto (timeframe-adaptive), Timeframe (manual higher TF), Date (specific date anchor)
Six Fibonacci deviation band pairs: Levels at 0.236, 0.382, 0.500, 0.618, 1.000, 1.618 × standard deviation × global sensitivity
Gradient fill on extreme zones: Color-to-transparent gradient between fib4 and fib6 identifies overextension zones
Z-score and reversion probability: Computed every bar with bell curve probability output (68.2% / 95.4% / 99.7% / 99.9%)
Synthetic order flow gate: Body ratio, volume participation, and wick rejection combined into a 0-100 score that gates VWAP cross signals
Candle coloring by Z-score: Bar colors intensity-coded by distance from VWAP — neutral near center, saturated at extremes
Band labels at right edge: Each band level labeled with its Fibonacci ratio and price value, updated each bar
Anchor reset marker: Vertical marker in elite theme color at each VWAP reset point
Four color themes: Phantom, Neon, Classic, Solar
Non-repainting: VWAP and bands computed cumulatively from anchor; no future data referenced
Institutional dashboard: 8-row table showing VWAP price, distance %, Z-score, reversion probability, order flow score, and market state
Input Parameters
Anchor Settings:
Anchor Method: Auto / Timeframe / Date
Manual Timeframe: Timeframe to anchor to when method is Timeframe
Manual Date: Specific timestamp when method is Date
Fibonacci Multipliers:
Global Sensitivity: Scales all band widths proportionally (default: 1.2)
Fib Level 1 through 6: Individual Fibonacci ratios (defaults: 0.236, 0.382, 0.500, 0.618, 1.000, 1.618)
Visual Styles:
Color Theme: Phantom / Neon / Classic / Solar
Highlight Candles: Toggle candle coloring by Z-score
Show Band Labels: Toggle right-edge price labels on each band
Table Position and Size
How to Use This Indicator
Step 1: Choose Your Anchor
For intraday scalping, use Auto or Daily anchor. For swing trading, use Weekly or Monthly. For event-driven analysis, use Date and anchor to a specific earnings release, FOMC announcement, or major swing point.
Step 2: Read Band Levels as Statistical Reference
The 0.5 band is one half standard deviation from VWAP — a mild deviation typical of normal trending behavior. The 1.618 band is the extreme extension zone. Price at the 1.618 band has a statistical reversion probability above 99.7%, but this does not mean reversion is imminent or guaranteed.
Step 3: Check the Reversion Probability
Read the Reversion Prob row in the dashboard. As Z-score rises above 2, reversion probability exceeds 95.4%. This quantifies how unusual the current deviation is relative to the full history from the anchor point.
Step 4: Confirm with Order Flow Score
The Order Flow score reflects whether the current bar has institutional characteristics. A high score (above 60) during a VWAP cross suggests genuine participation. A low score (below 30) during a cross suggests a potentially false signal.
Indicator Limitations
The VWAP standard deviation widens significantly with the anchor period. Bands anchored to a six-month period will be very wide; bands anchored to one day will be tight. The global sensitivity parameter must be adjusted accordingly
The Z-score probabilities assume normally distributed returns, which markets do not produce. Fat tails mean extreme Z-scores occur more frequently than the percentages suggest
The synthetic order flow score uses tick volume as a proxy for actual order flow. On assets with low tick frequency, this approximation is less reliable
VWAP-based analysis is most relevant for liquid instruments
This indicator does not generate entry or exit signals. It provides statistical deviation context
Originality Statement
Replacing standard deviation band multipliers with Fibonacci ratios (0.236 through 1.618), scaled by a volume-weighted standard deviation from a MIDAS anchor, is not replicated in existing open-source Pine Script v6 VWAP publications
The combination of Z-score computation, bell curve probability quantification, and a synthetic order flow score as a gate for VWAP cross signals within a single indicator is an original integration
The candle coloring gradient driven by Z-score intensity provides real-time deviation awareness directly on price bars without requiring a separate oscillator panel
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss. Statistical deviation probabilities are based on a normal distribution assumption that financial markets do not satisfy. Past VWAP behavior does not predict future price action. The author accepts no responsibility for trading losses resulting from use of this indicator.
Made with passion by jackofalltrades
Indicator
OMSF Learning SpaceWelcome to the Omsf Learning Space.
This is not a commercial "holy grail" indicator, nor is it a rigid, corporate course. This is my personal sandbox and educational archive where I dissect market structure, breakout mechanics, and reversal setups.
THE CORE PHILOSOPHY:
Everything in this space is built upon my Omsf (Objective Market Structure Framework). Whether you are a beginner trying to understand how charts breathe, or an advanced trader looking for mechanical rules – this space is designed to give you a clear, visual reality check.
WHAT TO EXPECT:
This script is dynamic and will change organically over time. As I publish new trading ideas, research notes, or structural concepts, this indicator will adapt. Old parts might get swapped out, new experiments will be added, or it might evolve into a v2.0 down the road. There is no fixed schedule. It updates when it updates.
CURRENT VERSION (Launch):
Right now, we are looking at the foundational mechanics: Classic, rigid Pivots alongside the dynamic volatility adjustment of the Omsf.
- Toggle "Exercise 1" to stress-test both engines in the configuration sandbox.
- Toggle "Outlook" to see how classic Pivots perform when taken literally as a trend filter.
Enjoy the sandbox, play with the parameters, and use the Bar Replay. See you in the ideas section!
— arni Indicator
Aura Trend & Candlestick Oracle [Pineify]Aura Trend & Candlestick Oracle
This indicator layers EMA-based trend detection with candlestick pattern recognition, then gates the pattern signals through the prevailing trend direction. The idea: candlestick reversals are far more reliable when they fire in alignment with the macro trend rather than against it. A hammer in a downtrend is noise; the same hammer in an uptrend is a potential continuation entry after a pullback.
Key Features
EMA cloud (fast/slow) with dynamic color fill that shifts between bullish, bearish, and neutral states
Five candlestick patterns: Bullish Engulfing, Bearish Engulfing, Hammer, Shooting Star, Inverted Hammer / Hanging Man
Signals filtered by trend — bullish patterns only fire in uptrends, bearish patterns only in downtrends
Background shading highlights trend zones for quick chart-reading
Dashboard panel showing live trend status and current EMA values
Four alert conditions: BUY signal, SELL signal, EMA bullish crossover, EMA bearish crossunder
How It Works
Trend detection uses two exponential moving averages — a fast EMA (default 50) and a slow EMA (default 200). When the fast EMA is above the slow EMA, the script treats the market as an uptrend; when below, a downtrend. This classic crossover relationship provides the filtering layer for all pattern signals.
Candlestick pattern detection evaluates each bar's body size, wick lengths, and direction, then checks the previous bar's properties for multi-bar patterns:
Engulfing patterns — the current candle's body fully wraps the prior candle's body in the opposite direction. Bullish Engulfing requires a red prior bar followed by a green bar that opens below the prior body low and closes above the prior body high.
Hammer — lower wick exceeds 2× the body size, upper wick is less than half the body. No directional restriction on the body itself.
Shooting Star / Inverted Hammer / Hanging Man — upper wick exceeds 2× body, lower wick less than half the body. The body color separates these: Inverted Hammer is green (treated as bullish), Hanging Man is red (treated as bearish). Shooting Star is the upper-wick pattern used for bearish signals.
How the Components Work Together
The EMA trend state acts as a regime filter, not just a visual layer. A bullish candlestick pattern (Engulfing, Hammer, Inverted Hammer) only triggers a BUY signal when fastEma > slowEma — the pattern fires into the trend, not against it. Similarly, bearish patterns only produce SELL signals when the fast EMA is below the slow EMA.
This prevents the common trap of fading reversals in strong trends. A hammer below the 200 EMA might signal a brief bounce, but it is not a high-probability long in a downtrend. By requiring trend alignment, the indicator reduces false positives from countertrend noise. The tradeoff is that signals at the beginning of a trend reversal — when the fast EMA has not yet crossed — will be missed. This is by design.
Trading Ideas and Insights
On higher timeframes (daily, weekly), use the EMA cloud crossover alert to identify macro trend shifts, then drop to a lower timeframe to look for BUY/SELL pattern signals for entry timing.
After a pullback to or near the fast EMA in an uptrend, a Hammer or Bullish Engulfing signal at that level adds confluence — price has retested the trend structure and showed rejection. Consider these setups stronger than patterns firing far from either EMA.
The Hanging Man (red candle with extended upper wick in an uptrend) triggers a SELL signal when the market is in a downtrend. In practice, watch for this pattern forming near prior resistance or the slow EMA during a counter-rally in a downtrend.
Use the dashboard panel to confirm trend state without scrolling back. On faster timeframes, the 50/200 EMA spread updates frequently; on crypto or forex pairs, consider adjusting the slow EMA to 100 to reduce lag.
Past candlestick patterns do not guarantee future price movement. All signals should be treated as areas of potential interest, not definitive entry triggers.
Unique Aspects
Trend-gating is the core differentiator here. Many candlestick indicators plot patterns on every bar regardless of context; this one explicitly suppresses countertrend signals at the calculation level, so the chart stays clean.
The Inverted Hammer is classified as bullish and the Hanging Man as bearish based on body color, using the upper-wick geometry. Some implementations treat these as the same pattern with identical signals; here they are split by color to reflect their different interpretations in technical analysis.
The EMA cloud uses transparency-adjusted fills that match the trend color, so the visual relationship between the two EMAs immediately communicates regime state without requiring a separate panel.
How to Use
Add the indicator to any chart and timeframe. The EMA cloud and background shading appear immediately, showing the current trend regime.
Watch for BUY labels (green) below bars during uptrend zones (green background) — these mark bars where a bullish pattern fired with trend confirmation.
Watch for SELL labels (red) above bars during downtrend zones (red background).
Set up alerts via the Alerts panel: choose "Aura BUY Signal" or "Aura SELL Signal" for pattern-filtered signals, or "Trend Shift to Uptrend/Downtrend" for EMA crossover notifications.
Check the dashboard (top-right corner) for live trend status and EMA values on the current bar.
Customization
Fast EMA Length (default: 50) — Controls the short-term trend line. Lower values increase sensitivity and produce more cloud crossovers; higher values smooth out the regime filter.
Slow EMA Length (default: 200) — The long-term trend anchor. The 50/200 combination is a widely watched institutional reference; on shorter timeframes, consider 20/50 or 9/21.
Color Candles by Trend — When enabled, all candles recolor to match the current trend state. Disable if you prefer standard OHLC coloring or are using another candle-coloring indicator.
Bullish / Bearish / Neutral Colors — All visual elements (cloud, candles, background, EMAs) derive from these three color inputs, so changing them updates the entire indicator at once.
Conclusion
Aura Trend & Candlestick Oracle combines two well-understood techniques — EMA trend detection and candlestick pattern recognition — with a regime filter that suppresses countertrend noise. It works best on trending markets where the EMA structure is well-defined; in choppy, sideways conditions, expect frequent EMA crossovers and fewer valid pattern signals. Traders who already use candlestick patterns and want an automatic trend-alignment layer without managing multiple indicators will find this a practical consolidation.
Indicator
Vesper Candle Index [JOAT]Vesper Candle Index
Introduction
Vesper Candle Index is an open-source candlestick classification engine. Instead of marking every common candle pattern equally, it scores candle patterns using body quality, wick structure, trend location, volatility, and nearby structure context.
The indicator is designed to reduce pattern noise by ranking candle events and displaying only those that meet a configurable quality threshold.
Core Concepts
1. Candle Pattern Library
The script evaluates multiple candlestick states, including engulfing candles, hammers, stars, harami, inside breaks, marubozu, tweezers, rail patterns, and reclaim/reject conditions.
2. Quality Scoring
Each candidate pattern receives a score based on candle body, wick placement, trend context, volatility, and structure alignment.
3. Structure Context
Confirmed pivot levels are used to detect CHoCH-style breaks and candle reactions near recent structure.
4. Trade Projection Labels
When a candle state qualifies, the script can display compact educational entry, stop, TP1, and TP2 information.
5. Dashboard
The dashboard shows the current candle state, quality bucket, trend, structure, and recent signal context.
Features
Ranked candle states: Patterns are scored rather than treated equally
Structure-aware candles: Uses pivots and CHoCH context
Volatility-adjusted logic: ATR helps normalize wick and body requirements
Cooldown control: Reduces repeated pattern labels
Compact dashboard: Summarizes the highest-ranked current candle state
Confirmed patterns: Pattern events use confirmed bars
Input Parameters
Pattern sensitivity controls the quality threshold
Pivot length controls structure confirmation
ATR settings control wick/body normalization
Rail projection settings control optional visual projection length
How to Use This Indicator
Step 1: Focus on high-quality states
Use the quality score to separate strong candle states from weaker pattern appearances.
Step 2: Check structure alignment
Candle events near relevant structure are often more meaningful than isolated patterns.
Step 3: Avoid treating patterns as certainty
Candlestick patterns describe current bar behavior. They do not predict continuation or reversal.
Indicator Limitations
Candle patterns can fail in strong trend or news conditions
Pivot-based structure is delayed by the selected pivot length
The script classifies candles; it does not forecast future direction
Originality Statement
Vesper Candle Index adds scoring, structure context, volatility normalization, cooldown behavior, and a dashboard to candlestick analysis. Its value is in ranking candle quality rather than simply labeling every pattern.
Disclaimer
This indicator is provided for educational and informational purposes only. It is not financial advice. Candlestick patterns can be misleading when used alone.
-Made with passion by jackofalltrades
Indicator
Institutional Displacement & Volume Delta [Bigbeluga]🔵 OVERVIEW
Institutional Displacement & Volume Delta is an advanced price action tool designed to identify high-conviction market moves, often referred to as "Displacement." It filters out market noise by highlighting candles that exhibit both significant price expansion and institutional-level volume.
By utilizing lower timeframe (LTF) data, the indicator deconstructs each displacement candle to reveal the internal "Buy vs. Sell" volume balance, allowing traders to see the true intent behind aggressive market shifts.
🔵 CONCEPT
Institutional Displacement — Identifies "Power Candles" that have a large body relative to their wicks, signaling a one-sided move by major market participants.
Volume Spike Filtering — Only qualifies a move as a "Shift" if the volume significantly exceeds a user-defined moving average.
Intrabar Volume Deconstruction — Uses a secondary, lower timeframe (e.g., 1m) to calculate exactly how much of a candle's total volume was dedicated to buying versus selling.
Internal Volume Blocks — Visually splits the body of displacement candles into color-coded sections (Buy Block and Sell Block) based on the internal delta ratio.
Market State Muting — Optionally mutes the color of "choppy" or low-volume bars to keep the focus purely on high-probability institutional activity.
🔵 HOW IT WORKS (IN-DEPTH)
1️⃣ Qualification of Displacement
The script first evaluates the "Body-to-Range" ratio. A candle must be mostly "body" (minimal wicks) to prove that the price didn't face significant rejection.
It then checks the Volume Multiplier. The volume must be X times higher than the 20-period average to confirm institutional "heavy lifting."
If both conditions are met, the bar is labeled a "Bullish Shift" or "Bearish Shift."
2️⃣ Lower Timeframe (LTF) Volume Analysis
Standard candles only show total volume. This indicator uses request.security_lower_tf to peak inside the bar.
It sums up every 1-minute (or user-defined) sub-candle to categorize volume as "Buy" or "Sell" based on the sub-candle's closing direction.
This calculation provides the Delta —the net difference between aggressive buyers and sellers.
3️⃣ Visual Representation
The main candle body is hollowed out, and a "Volume Block" is inserted inside.
The split point of the inner block represents the ratio of Buy vs. Sell volume. If a Bullish Displacement bar has a large Red inner block at the top, it may signal that sellers were heavily defending that area despite the bullish close.
Floating labels provide immediate access to the exact Volume and Delta figures.
🔵 KEY FEATURES
Precise Shift Identification: Combines price expansion (Displacement) with volume spikes.
Internal Delta Blocks: Unique visual deconstruction of candle volume ratios.
Institutional Dashboard: Displays real-time data for the most recent shift, including total volume, delta, and a session shift counter.
Muted Chop Mode: Grey-scales non-significant candles to highlight the "Path of Least Resistance."
Error Handling: Built-in notification if the user selects an LTF timeframe that is mathematically incompatible with the current chart.
🔵 DASHBOARD METRICS
Last Shift: Indicates the direction (Bullish/Bearish) of the most recent displacement.
Shift Vol: The total volume transacted during the most recent high-conviction move.
Shift Δ: The net delta of the last shift, showing the dominant aggressive party.
Shift Count: A running tally of Bullish vs. Bearish shifts since the chart was loaded.
🔵 HOW TO USE
Identifying Ignition: A Displacement bar appearing at a support or resistance level often marks the start of a new trend (Trend Ignition).
Spotting Traps: Look for "Bullish Shifts" where the Sell Block makes up a large portion of the candle body. This indicates heavy absorption by sellers and may lead to a failed breakout.
Confluence with Delta: Use the Dashboard's "Shift Δ" to confirm that the displacement move is backed by strong net buying/selling rather than just high-volume churn.
Exit Timing: If price enters a consolidation zone and the "Shift Count" starts alternating rapidly between Bullish and Bearish, it indicates institutional indecision.
🔵 CONCLUSION
Institutional Displacement & Volume Delta provides a specialized lens into market momentum. By focusing on displacement and the internal mechanics of volume, it helps traders align themselves with the "smart money" and avoid the low-probability volatility of retail-driven noise. Indicator
Indicator
Indicator
Oliver Velez System Visual Helper [CocoChoco]Not endorsed by or related to Oliver Velez himself.
🐘 Oliver Velez System Visual Helper
🎯 Overview
Unlock the power of Institutional Trading with this precision tool designed for followers of the Oliver Velez (OV) methodology. This indicator specializes in identifying the "Narrow State"—the coiled spring of the market—and highlighting the high-probability entry candles that signal institutional participation.
Unlike standard indicators that lag, this helper focuses on the transition from low to high volatility, giving you a front-row seat to the moves that matter.
🧩 The Core Philosophy: The Narrow State
According to Oliver Velez, the most explosive moves in the market occur when the 20 SMA and the 200 SMA converge into a Narrow State. This represents a moment of equilibrium where both short-term and long-term traders are in agreement, and the next move is likely to be a significant expansion.
This indicator automates that discovery by:
Measuring Distance: It calculates the exact percentage gap between the SMAs to find the "coil."
Verifying Parallelism: It ensures the SMAs are moving "somewhat horizontal" and parallel, filtering out chaotic crossovers.
Multi-Timeframe Confirmation: It checks your higher timeframe (e.g., 15m) to ensure the big players are aligned before you take a trade on the smaller timeframe.
⚡ Power Entry Highlights
Once a Narrow State is confirmed, the indicator "paints" the chart with specific Velez-style entry patterns. These bars only highlight when Price > 20 SMA > 200 SMA (Bullish) or Price < 20 SMA < 200 SMA (Bearish), ensuring you never trade against the trend.
EB (Elephant Bar): The "Institutional Footprint." Large, solid-bodied bars that represent massive buying or selling.
TB (Tail Bar): Bottoming and Topping tails that show clear rejection of the SMAs, signaling a reversal into the main trend.
180 (Bull/Bear 180): A two-bar reversal pattern where the current bar completely engulfs the body of the previous bar, effectively "flipping" the momentum.
🛠️ Key Features
Dynamic Cloud Ribbon: A solid visual zone between the 20 and 200 SMAs that appears only when the Narrow State and MTF alignment are perfect.
Smart Bar Coloring: Only the specific institutional breakout bars change color, keeping your chart clean and professional.
Dual Alert System:
Narrow State Start: Get notified the second the market begins to coil.
Entry Candle Close: Get a ping exactly when a valid EB, TB, or 180 closes.
Consolidated Style: A clean UI that allows you to manage all pattern colors with a single picker.
🚀 How to Use
Wait for the Cloud: When the ribbon appears between the SMAs, the market is in a Narrow State.
Look for the Color: Watch for an Aqua (default) candle to form.
Check the Label: Verify the entry type (EB, TB, or 180).
Execute: Per OV's rules, enter on the break of the entry bar’s high/low with a stop at the tail/low of the bar.
Disclaimer: Trading involves significant risk. This tool is a visual aid, and may be significantly different from Oliver Velez system, and does not constitute financial advice. Always practice proper risk management. Indicator
Smart Candlestick Pattern Filter [MarkitTick]💡 This Script is a sophisticated technical analysis tool designed to identify, grade, and display over 40 distinct candlestick formations based on a proprietary strength and context filtering system. Unlike standard pattern finders that often clutter charts with conflicting signals, this script utilizes a hierarchy logic to display only the most significant pattern detected on any given candle, ensuring chart clarity and actionable data.
● Originality and Utility
The primary utility of this script lies in its filtering engine. Standard indicators often flag every minor Doji or Spinning Top, creating noise. This indicator categorizes patterns into five distinct levels of strength, ranging from simple indecision to very strong reversal or continuation signals.
Furthermore, it incorporates a Trend Context filter, which checks the relationship between price and a Simple Moving Average (SMA). This ensures that reversal patterns (like Hammers) are prioritized during downtrends, while continuation patterns are highlighted during established moves, reducing false positives.
● Methodology
The indicator evaluates price action using specific ratios between the Open, High, Low, and Close, alongside the body size relative to the total range. It assigns a strength score to each detected pattern.
• Pattern Strength Grading
Strength 1 (Indecision): Includes patterns like Doji, Spinning Tops, Dragonfly, and Gravestone Dojis. These signal a pause in momentum.
Strength 2 (Weak): Includes patterns like Hanging Man, Inverted Hammer, Belt Holds, and In-Neck lines. These suggest potential movement but often require confirmation.
Strength 3 (Moderate): Includes classic reversals like Hammers, Shooting Stars, Haramis, Dark Cloud Cover, and Piercing Lines.
Strength 4 (Strong): Includes major signals like Engulfing patterns, Morning/Evening Stars, and Marubozu candles.
Strength 5 (Very Strong): Reserved for rare, high-probability multi-candle formations like Three White Soldiers, Three Black Crows, Rising/Falling Three Methods, and Breakaway gaps.
The script calculates all potential patterns for the current bar and then compares their strength scores. Only the pattern with the highest strength is displayed. If the Show Trend Context option is enabled, the script further validates the pattern against the current market direction (determined by the SMA and slope) before plotting.
● How to Use
Traders can use this tool to identify potential entry and exit points based on the strength of the signal.
• Visual Signals
Patterns are labeled directly on the chart:
Green Labels/Text: Indicate Bullish patterns.
Red Labels/Text: Indicate Bearish patterns.
Gray/White Labels: Indicate Indecision or Weak patterns.
Hovering over any label provides the full name of the pattern and its strength rating (e.g., "Bullish Engulfing - Strength: Strong").
• Trading Logic
High Strength Signals (Levels 4-5): These can be used as primary triggers for trend reversals or strong continuations.
Moderate Signals (Level 3): Useful for adding confluence to existing analysis or anticipating a setup.
Indecision (Level 1): Often useful for taking profits or tightening stop-losses, as they indicate the current trend may be stalling.
● Settings
Show Only Strong Patterns: When enabled, filters out Strength 1, 2, and 3, showing only the most significant signals (Strength >= 4).
Max Patterns to Display: Limits the number of historical labels to prevent chart clutter.
Max Candles to Check Engulfing: Adjusts how far back the script looks to validate the size of an engulfing candle.
Trend Detection Period: Sets the length of the SMA used to determine the background trend context.
Show Only Trend-Appropriate Patterns: If checked, bullish reversals are only shown in downtrends, and bearish reversals in uptrends.
● Disclaimer
All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. I expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion. Indicator
Indicator
Indicator
Timeframe LiquidityTimeframe Liquidity – Multi-Timeframe Highs & Lows by
Timeframe Liquidity automatically plots previous day, week, month, and year highs and lows, key liquidity zones used by smart money and price-action traders. These levels extend into the future and can automatically stop once price wicks through, showing clear liquidity sweeps and tested zones.
Perfect for traders using ICT / SMC concepts, liquidity theory, or market structure analysis. Instantly see where liquidity rests, where it’s been taken, and how price reacts at major support and resistance.
Features:
Auto-plots PDH/PDL, PWH/PWL, PMH/PML, PYH/PYL
Custom line styles, colors, and label sizes
Option to stop line on wick (liquidity sweep)
Smart timeframe visibility (hides same-TF levels)
Accurate UTC offset handling
Identify liquidity pools fast, trade cleaner charts, and track where smart money hunts liquidity.
Built for precision, clarity, and confluence. Indicator
Candle Range Detector by TradeTech AnalysisCandle Range Detector by TradeTech Analysis
This advanced indicator identifies and visualizes price compression zones based on inside bar formations, then tracks how price behaves around those zones — offering valuable insights into liquidity sweeps, range expansions, and trap/mitigation behavior.
The script builds upon the foundational concept of range-based price action, commonly used by institutional traders, and adds automation, mitigation tracking, and sweep detection to map how price reacts around these critical ranges.
🔍 How It Works:
• Range Formation: A new range is detected when the current candle forms entirely within the high and low of the previous candle (i.e., an inside bar). This behavior often indicates price compression and potential breakout zones.
• Range Extension: Once a range is confirmed, the script projects upper and lower boundaries (using either a percentage-based multiplier or Fibonacci log extension), providing context for expected breakout zones.
• Mitigation Tracking: The script continuously monitors whether price breaks above or below the projected extensions, marking that range as mitigated — useful for confirming whether liquidity was absorbed.
• Sweep Detection: If price re-visits a mitigated zone and shows signs of a liquidity sweep (via wick + close behavior), the indicator triggers visual sweep labels and optional alerts.
🧠 Optional Visual Enhancements:
• Highlight range-forming candles with light blue background (toggle on/off)
• Midpoint dotted line for symmetry analysis
• Labels for “Range High” and “Range Low” for visual clarity
• Dynamic box drawing that adapts upon mitigation or continuation
⚙️ Customizable Features:
• Choose between Normal and Fibonacci-based detection modes
• Toggle visibility of range boxes, extension lines, and sweep markers
• Configure sweep alerts, mitigation window size, and visual transparency
⸻
🧪 Use Cases
• Identify consolidation zones before major price moves
• Confirm liquidity sweeps for entry/exit traps
• Visualize and test mitigation behavior of past zones
• Combine with Order Flow or Volume Profile tools to enhance context
⸻
⚠️ This is a fully original implementation that goes beyond classical inside-bar scanners by incorporating mitigation, extension projection, and liquidity sweeps — making it a powerful tool for intraday, swing, and even Smart Money-based trading setups. Indicator
Indicator
Indicator
Indicator
Indicator
Candles Volume HeatMap [BigBeluga]Candles Volume HeatMap
The Candle Volume HeatMap indicator is a unique and advanced tool that visualizes lower timeframe volume activity within higher timeframe candles, offering traders a granular perspective on volume distribution.
⚠️Important note: before using the indicator, it is necessary to apply it to the candles
🔵Key Features:
Volume HeatMap Visualization: The indicator breaks down each higher timeframe candle into 10 equal vertical segments (boxes) based on its high-to-low range. Each box represents a lower timeframe candle's volume activity, with more intense colors indicating stronger volume levels.
Lower Timeframe Integration: Automatically uses a timeframe 10x lower than the current chart. For example, on a 10-hour chart, it uses 1-hour candles to extract volume data.
POC (Point of Control): The highest volume box within each candle is marked with the volume value. The indicator also plots a horizontal POC line at the level of this box, highlighting significant areas of price interest. The POC line is removed once the price crosses it, ensuring the chart stays clean.
Delta Display (Optional): Traders can enable the Delta feature to analyze buyer vs. seller activity within each higher timeframe candle.
Delta is calculated by summing 10 lower timeframe candles: a bullish candle adds to buyers, while a bearish candle adds to sellers. Displays the net Delta percentage: positive values (white) indicate buyer dominance, while negative values (red) indicate seller dominance.
Dynamic Volume Scaling: The highest volume value in each candle is displayed inside its respective box, providing quick insights into critical price-volume levels.
🔵How It Works:
For each higher timeframe candle, the indicator analyzes 10 lower timeframe candles and maps their volume into 10 segments (boxes) between the high and low of the current candle.
The intensity of each box's color corresponds to the relative volume of the lower timeframe candle it represents.
The POC highlights the price level with the highest concentration of volume, aiding in identifying potential support/resistance zones.
Delta analysis offers additional insights into market sentiment by breaking down buyer and seller activity in each candle.
🔵Use Cases:
Spotting key volume areas within higher timeframe candles to identify support and resistance levels.
Analyzing volume concentration for potential breakout or reversal zones.
Leveraging Delta analysis to gauge market sentiment and confirm volume-based trends.
This indicator is ideal for traders seeking to combine volume analysis with price action, offering precise insights into volume distribution and market dynamics. Indicator
TechniTrend: CandleMetrics🟦 Overview
The TechniTrend: CandleMetrics Indicator is a powerful tool designed to give traders an in-depth analysis of candlestick structures. This indicator allows users to identify potential reversal points, trend continuations, and other crucial market behaviors by examining key ratios between candle components—such as body, shadow, and overall range—alongside volume conditions. The advanced filtering options offer flexibility for both novice and experienced traders, enabling tailored setups to suit different trading strategies.
🟦 Key Features
🔸Customizable Ratios: Set thresholds for Body-to-Range, Shadow-to-Range, Upper Shadow-to-Range, and Lower Shadow-to-Range ratios.
🔸Volume-Based Filters: Integrate volume conditions to strengthen the reliability of signals.
🔸Flexible Conditions: Choose whether filters should work independently or in combination, allowing for precise pattern identification.
🔸Visual Markers: Mark potential signals with a distinct background color and symbols on the chart.
🔸Alerts: Receive notifications for each selected condition, ensuring you never miss an opportunity.
🟦 How It Works
The CandleMetrics Indicator operates by analyzing the relationship between different components of each candlestick, combined with volume data to determine the strength of signals. Here’s a detailed breakdown of each feature:
🔸 Body to Range Ratio:
This filter compares the size of the candle's body to its total range (from high to low).
Example Setting: If you’re interested in spotting candles with small bodies relative to their total range, you might set the Body-to-Range Ratio to “Less than 0.3.”
🔸 Shadow to Range Ratio:
This examines the combined size of both shadows (upper and lower) relative to the entire candle range.
Example Setting: Use a Shadow-to-Range Ratio set to “More than 0.8” to find candles with significant wick lengths, suggesting market indecision.
🔸 Upper Shadow to Range Ratio:
This filter assesses the proportion of the upper shadow (wick) in relation to the candle’s full range.
Example Setting: “Less than 0.05” can help identify situations where the upper shadow is minimal, indicating strong downward pressure.
🔸 Lower Shadow to Range Ratio:
It measures the lower shadow compared to the entire candle range.
Example Setting: “More than 0.7” is useful for detecting potential rejection patterns at lower prices, hinting at a possible bullish reversal.
🔸 Volume Filter:
Integrates volume data to verify the reliability of each candle pattern.
Example Setting: Apply a Volume Filter Length of 100 with an SMA type to smooth volume data over a longer period, filtering out short-term noise and focusing on significant volume shifts.
🟦 Combining Filters
The indicator offers an option to Combine Filters. When this setting is enabled, all selected conditions must be met simultaneously for a candle to be marked. If disabled, each condition functions independently, allowing more flexibility in detecting diverse patterns.
🟦 Examples & Use Cases
🔸Example 1: Spotting Reversal Opportunities
I used the following configuration to find potential bullish reversals:
Upper Shadow to Range Ratio: “Less than 0.05” – Looking for candles with almost no upper shadow.
Lower Shadow to Range Ratio: “More than 0.7” – Highlighting candles with a significant lower shadow.
Volume Filter Length: 100 with SMA.
This setup effectively highlights candles where price rejection is happening at lower levels, suggesting a potential trend reversal to the upside.
🔸Example 2: Detecting Market Uncertainty
If you want to focus on candles showing market hesitation, try:
Shadow to Range Ratio: “More than 0.85” – Emphasizing long-wick candles that could indicate indecision.
Disable Combine Filters to allow flexibility, marking any candle meeting the above criteria.
🟦 Detailed Explanation of Each Option
Here’s a clear and concise breakdown of each option for a better understanding:
1. Body to Range Ratio
Purpose: This ratio shows how significant the candle's body is compared to its overall range. A smaller body-to-range ratio can indicate a potential reversal if the market appears indecisive.
How to Use: Increase the ratio to filter for stronger trend candles; decrease it to identify reversal or indecision candles.
2. Shadow to Range Ratio
Purpose: This filter captures the size of both shadows relative to the candle's total range. A larger ratio often points to market hesitation, while a smaller ratio suggests a decisive move.
How to Use: Adjust this filter to focus on candles with long wicks (indecision) or short wicks (decisiveness).
3. Upper Shadow to Range Ratio
Purpose: Helps to identify candles with strong downward moves by focusing on the upper wick length. A small upper shadow can imply sellers' dominance.
How to Use: Lower the ratio to detect candles with minimal upward rejection.
4. Lower Shadow to Range Ratio
Purpose: Targets candles with strong buying pressure by analyzing the lower shadow. A larger lower shadow may indicate a bullish reversal.
How to Use: Increase the ratio to spot rejection candles with significant lower shadows.
5. Volume Filter
Purpose: Adds a volume component to verify the validity of each candlestick pattern. Higher-than-average volume often signifies the strength of a move.
How to Use: Adjust the filter length and type to smooth out volume fluctuations based on your trading timeframe.
🟦 Indicator Alerts
Each filter has its own alert configuration, enabling traders to stay updated on market conditions that meet their selected criteria. You can customize alerts to trigger whenever a condition is met, helping to manage trades even when away from the screen. Indicator
