PulseHub
Get started

Candlestick Analysis

Day Trading Cheat SheetA single compact table that answers the handful of questions worth asking before taking an intraday trade in index futures, so you are not eyeballing six separate indicators to reconstruct the same picture every morning. Everything is session-aware, resets at the cash open, and reports distances in points. WHAT THE TABLE SHOWS OR5 — 5-minute opening range Captures the high and low of the first 5-minute candle of the cash session, then tracks which side of it price has traded on for the rest of the day. Four states: Above OR only — early bullish lean Below OR only — early bearish lean Two-way — price has been both sides; neutral, defer to higher timeframe bias Inside OR — undecided, range not yet resolved The states latch for the session. Once price has been both sides, that is a fact about the day's character and it stays on the board. OD30 — opening 30-minute drive Counts consecutive up (or down) 5-minute bars inside the first 30 minutes of the cash session. Three in a row sets a directional bias for the remainder of the day. Evaluated on 5-minute bars regardless of your chart timeframe, so it reads the same on a 1-minute chart as on a 5-minute one. GAP — cash open vs prior cash close Compares the session open to the previous cash session's close, not the overnight close, so it measures the true cash-to-cash gap. Reports direction, size in points, and whether the gap has been filled — filled meaning price has traded back through the prior close. PDH / PDL — prior cash session high and low The previous cash session's extremes, plus whether either has been taken out today. Swept levels are marked with a check and dimmed on the chart. By default only the current cash session can take out a level; an input lets overnight trade count as well. AVWAP RTH / AVWAP ETH / EMA — trend reference Three lines, each reporting its value, its slope, and price's signed distance from it: AVWAP RTH — anchored to the 5-minute candle before the cash open AVWAP ETH — anchored to the first 5-minute candle of the electronic session EMA — length configurable, 21 by default Slope is shown as a glyph: ▲ rising, ▼ falling, – flat, with a configurable neutral band so it does not flicker on noise. VALUE AREA — developing volume profile Builds a live volume profile from 1-minute intrabar data, distributing each intrabar's volume across the price bins it spans, and derives VPOC, VAH and VAL using the standard 70% expansion method. The row reports whether price is inside value, above VAH, or below VAL. HOW THE ANCHORED VWAPS WORK Both VWAPs re-anchor once per day and are drawn as polylines rather than plots. This matters: a plot writes a value onto every historical bar and cannot be erased, so a daily-resetting VWAP leaves a trail of previous sessions on the chart. Drawing them as polylines means the previous run is deleted at each new anchor and only the current session's VWAP is ever visible. Points are stored with timestamps rather than bar indices so the lines can span a full 23-hour electronic session on a 1-minute chart without running past Pine's historical buffer. THEMING The table samples the chart background's luminance and switches between a light and a dark palette automatically. Set it manually if you use a custom background. Panel opacity, position, and text size are all configurable, and the first column has no fill so it sits directly on the chart. INPUTS WORTH KNOWING Session and timezone — defaults are 09:30–16:00 America/New_York and an 18:00 electronic open, matching CME index futures. Adjust for other instruments or data feeds. Bin size — volume profile resolution in ticks. 4 ticks = 1 point on ES/NQ. Smaller is finer but heavier to compute. OR5 wick vs close — whether a wick beyond the opening range counts as trading through it, or only a bar close. Overnight sweeps — whether globex trade can take out PDH/PDL. Slope lookback and neutral band — how sensitive the ▲▼– glyphs are. NOTES AND LIMITATIONS GAP, PDH and PDL need a completed prior cash session in the loaded history. On the first session of your chart data they show a dash until the next day rolls over. The value area is developing , so it moves during the session. The first 30–45 minutes of profile are thin and the levels will shift. It is most meaningful after roughly the first hour. The 1-minute intrabar profile approximates a true volume profile. It is close, but it is not tick data. Session defaults assume CME index futures. Data feeds define session boundaries differently; check that the ETH anchor lands on the actual session break on your chart. This is a contextual dashboard, not a signal generator. It tells you where price sits relative to the session's reference points; it does not tell you what to do about it. Nothing here is financial advice.
Indicator
by Juke10x
ATK/DEF Support Resistance SR Force MatrixS/R Force Matrix is a custom support and resistance analysis framework designed to stud the strength, behavior, and historic significance of pric reactio areas through a combination of volatility adjustment, swing struc analysis, liquidity measurement, and candle pressure evaluati. Traditional support and resistance methods usually treat pric lev as fixed horizontal areas created from previous hig and lo. However, market conditions are constantly changing, and the importance of a pric lev can vary depending on volatility, histor interaction, participation intensity, and current market behavior. S/R Force Matrix introduces a dynamic calculat approach by combining multiple independent market measurements to evalu the relative strength characteristics of support and resistance zo. The core concept of this indicator is that a pric lev should not only be observed by its location, but also by the market inform surroud its formation and histor behavior. ATR-Based Dynamic Power Calculation The foundation of S/R Force Matrix is an ATR-based normalization system. Instead of using fixed distance measurements, the indicator adapts its calcula according to current volatility conditions. ATR is used as a volatility reference to evalua the relative size and significance of historical pric movements across different market environments. This allows the indicator to analyze pric lev with a dynamic perspective rather than treating every historical swing point equally. Historical Swing Structure Analysis The indicator identifies histo swing highs and swing lows as potential resistance and support areas. Each detected pric area is evalua through historical data characteristics, including: previous pric formation historical interaction frequency distance from current price volatility-adjusted movement size The purpose is to create a structured representation of how important pric areas develop over time. Price Reaction Strength Matrix S/R Force Matrix combines several measurements into a unified strength evaluati model. The Power calcula integrates: histori volatility conditions volume participation swing importance timeframe adjustment historical interaction behavior This creates a matrix-based view of pricarea strength instead of displaying simple support and resistance lines. Market Pressure Analysis The indicator includes candle pressure analysis to observe the internal balan between upward and downward pric movement. By analyzing candle position within the tra range, the system measures the relationship between: closing location candle range distribution current pressure balance This provides additional context about current pric behavior around important lev. Liquidity Flow Observation Volume activity is incorporated to analyze changes in market participation. The Liquidity Flow component observes: relative volume expansion volume contraction prie position compared with VWAP participation intensity The purpose is to visualize how market activity changes around pri areas rather than relying only on price levs. Timeframe Adaptive Framework S/R Force Matrix automa adjusts calcula based on different timeframe environments. Different chart intervals contain different volatility characteristics and market structures. The timeframe multiplier helps maintain a more consistent analytical framework when observing various market conditions. Difference From Traditional Support & Resistance Tools Unlike traditional support and resistance indicators that mainly mark previous highs and lows, S/R Force Matrix focuses on the strength characteristics behind each pric area. Traditional approaches generally answer: "Where did price previously react?" S/R Force Matrix focuses on: "How significant was the histori reaction area based on multiple calculated market factors?" By combining ATR volatility analysis, historical swing behavior, liquidity information, and candle pressure measurements, the indicator creates a broader market structure visualization. Design Philosophy S/R Force Matrix is created as a quantitative market behavior analysis. The objective is to provide a structured way to observe: dynamic support and resistance characteristics historical pric area importance volatility-adjusted strength liquidity participation changes current market pressure conditions The indicator does not provide tra instructions, or financial advice. It is designed to help users analyze and price behavior through a multi-factor calculat framework.
Indicator
by ATTDEFS
ATK/DEF Support Resistance SR Power Range Overview ATK/DEF S/R Power Range is a custom market structure analysis indicator designed to stud historical pric reaction areas through adaptive volatility measurement, swing structure analysis, volume participation, and candle pressure behavior. Unlike traditional static support and resistance tools that rely only on horizontal price levels or manually selected zones, this indicator introduces an ATR-based adaptive calculat framework to evalua the historical significance and strength of previous market reaction points. The purpose of this indicator is to provide a structured visualization of how histor price areas develop, how much market activity occurred around those areas, and how current price behavior interacts with previously established zones. Core Concept Market reaction areas are not only determined by pric location. Different historical poin may contain different levels of participation, volatility impact, and market activity. ATK/DEF S/R Power Range combines multiple independent measurements to create a more dynamic observation model: Swing structure identification ATR-based volatility normalization Historical reaction strength calculation Volume participation analysis Candle pressure balance measurement These components work together to evaluate the relative strength characteristics of historical price regions. Adaptive S/R Power Calculation The indicator uses ATR-based normalization to adapt the calculation according to current market volatility conditions. Instead of treating every pric movement equally, the system measures historical swing points with consideration of: Volatility environment through ATR Relative volume activity Distanc from current market area Historic importance weighting This creates a dynamic power calculation that reflects how significant each detected swi area has been under previous market conditions. Historical Swing Structure Analysis The indicator identifies historical swing highs and swing lows to build a database of previous market reaction points. Each detected area is analyzed according to: Location of the swing point Historical occurrence Strength calculation Relative importance compared with other detected zones This allows the chart to display a structured map of historically important reaction areas rather than simple fixed horizontal levels. Candle Pressure Analysis In addition to price location, the indicator analyzes candle internal behavior. The pressure module evaluates: Closing position within the candle range Upper and lower wick distribution Relative dominance between upward and downward pressure This provides additional information about the balance of market forces around current pric movement. Power Range Visualization Each detected region is assigned a calcula strength value. The strength classification helps visualize different levels of historical significance: Weak reaction areas Moderate reaction areas Strong historical zones Extreme activity regions The purpose is to display the intensity characteristics of previous pric interactions through a measurable framework. Difference From Traditional Support & Resistance Tools Traditional support and resistance indicators generally focus on: Fixed horizontal levels Simple pivot calculations Manual zone marking Basic swing identification ATK/DEF S/R Power Range expands this concept by combining: Adaptive ATR-based measurement Historical strength weighting Volume participation analysis Candle pressure evaluation Instead of viewing support and resistance only as static pric levels, this indicator trea them as dynamic market behavior areas influenced by volatility and participation. Design Philosophy ATK/DEF S/R Power Range was created to provide a quantitative approach to stu market structur and historical price behavior. The indicator does not attempt to predict future movement or provide tra instructions. Its purpose is to help users analyze: Where significant histori reactions occurred How strong those areas were relative to market conditions How price behavior develops around important zones By combining volatility, structure, volume, and pressure analysis, ATK/DEF S/R Power Range creates a broader framework for observing market interaction with histor pric areas.
Indicator
by ATTDEFS
2
Order Block HunterOrder Block Hunter identifies a specific bullish reversal pattern from Smart Money Concepts (SMC): a down-closing week immediately followed by a breakout week whose range exceeds 1.5× the prior week's range and closes above that week's high. Weekly timeframe only — the pattern was tested and validated exclusively on weekly bars; it will not fire on other timeframes. Backtest methodology: tested on ~6,000 US-listed NYSE/NASDAQ tickers (~9,200 total signals), split into a development period (pre-2022) and a blind holdout period (2022+) never used to tune the rules. Compared against a buy-any-week baseline on the same universe. Confirmed not driven by a small handful of repeat tickers — per-ticker average win rate held up even when the 20 most frequent tickers were excluded. What's shown on the chart: Entry marker on the most recent signal only The original "Order Block" zone (down week's range) as a shaded box An invalidation level below the zone (tested to reduce false stop-outs vs. using the zone's exact low) Two reference target levels based on historical median/mean forward returns Optional EMA lines for visual trend context (not used as a filter — tested separately and found not to meaningfully affect outcomes)
Indicator
by h4ck07
Next Candle Predictor V4.1## Next Candle Predictor V4.1 — Terminology and Presentation Update This update improves the clarity of the indicator's terminology and on-chart presentation while preserving its existing calculation framework, weighting structure, visual layout, and signal conditions. ### Changes - Renamed displayed “Prediction” values to “Directional Score”. - Replaced “Perfect Time” with “Strong Setup”. - Renamed the volume-derived component to “Estimated Volume Pressure”. - Renamed projection visuals to “Directional Scenario Candles”. - Updated dashboard labels and alert messages for clearer interpretation. - Removed performance-target wording. - Added author attribution: Developed by Ceyhun C. Canbazoglu. ### Score Interpretation The displayed long and short percentages are normalized directional confluence scores derived from the indicator’s rule-based components. They are not statistical probabilities, expected win rates, guarantees, or forecasts of the next candle’s result. ### Estimated Volume Pressure Estimated Volume Pressure uses OHLCV data and the closing price’s position within the candle range to estimate directional pressure. It is not exchange-level bid/ask volume delta or actual aggressive buying and selling volume. ### Directional Scenario Candles The optional scenario candles are volatility-scaled visualizations based on the indicator’s current directional scores. They do not forecast the next candle’s exact open, high, low, close, direction, or price target. ### Core Framework The existing multi-factor framework remains unchanged and continues to evaluate: - trend direction, - EMA alignment, - MACD momentum, - RSI position, - Stochastic conditions, - ADX trend strength, - relative volume, - estimated volume pressure, - and volatility regime. This indicator is intended as a technical-analysis and decision-support tool. It does not provide financial advice or guarantee trading results.
Indicator
by PredictaFutures
Linear GANN 2.0 - Adib NooraniLinear GANN 2.0 is a clean, visually unobtrusive indicator designed to automatically plot key mathematical price levels on your chart. Instead of manually drawing horizontal lines every day, this script instantly applies a massive array of predefined Gann-based numerical levels, saving you time and keeping your analysis consistent. The Math Behind the Indicator PulseWire requires transparency in how indicators are calculated. This script does not use moving averages or volume; instead, it plots a hardcoded sequence of mathematical values inspired by Gann theory and the Square of Nine. If you look at the underlying array, the price levels follow a distinct geometric sequence based on squares. The pattern alternates between perfect odd squares and even squares plus one: 1 5 (which is 2² + 1) 9 (which is 3²) 17 (which is 4² + 1) 25 (which is 5²) 37 (which is 6² + 1) ...and so on, scaling all the way up to accommodate high-value assets like Bitcoin or major indices. How to Use It in Your Trading Because these numbers act as psychological and mathematical pivot points, traders can use these lines as traditional Support and Resistance zones. 1. Trend Continuations - If the price breaks cleanly above a Gann line and retests it, that level often flips from resistance to support. The next line up becomes your logical take-profit target. 2. Reversals - Watch for exhaustion or liquidity sweeps around these exact levels. If price wicks heavily at one of these lines, it can signal a potential reversal. Key Features Dynamic Labels - To prevent chart clutter, the price labels are coded to constantly push to the far right edge of your screen, mimicking the native price scale. Infinite Lines - The lines use the `extend.both` property, meaning no matter how far back or forward you scroll, your levels are always there. Customization - Fully customizable line thickness and colors to match both dark and light themes, with a toggle to turn labels on or off. Always use candlestick patterns or consolidation breakouts around the GANN levels to enter with good Risk : Reward
Indicator
by AdibNoorani
7
Advanced Support and Resistance with Reversal [AlphaPine]Advanced Support and Resistance with Reversal | AlphaPine I built this indicator for a simple reason: a breakout line on its own does not tell me enough. I also want to know whether price comes back, holds the level from the other side, and later loses it again. The script starts with confirmed swing highs and lows. Those become resistance and support. It then follows each level through three possible events: breakout, retest, and failure. Nothing here predicts the next move. It is a way to keep market structure organised without redrawing the same levels by hand. The image below shows the full level lifecycle in one view, including the symbols that appear at each stage: How a level is created A resistance level comes from a confirmed pivot high. A support level comes from a confirmed pivot low. If zones are enabled, the zone uses the wick range of the pivot candle rather than an arbitrary fixed width. Pivot confirmation takes time. With Pivot Length set to 10, for example, the script needs ten bars on the right side of the pivot before the level exists. This delay is intentional. Pivot Length controls how selective the swing detection is. A larger value usually gives fewer levels and confirms them later. Lookback Period sets how long a level remains in the script's working history. Maximum Levels per Type limits stored resistance and support records so the chart does not keep growing indefinitely. Wick Dominance Filter keeps only pivot candles whose rejection wick is larger than the body and opposite wick. Merge Nearby Active Levels removes clutter by skipping a new pivot when an active level of the same type is already nearby. Broken levels do not block a fresh one. The merge distance uses ATR-14, so it adjusts to the instrument instead of relying on one fixed price interval. Breakouts The default breakout mode is Close . Resistance must close above its boundary, while support must close below it. This avoids counting every small wick through a level. Wick mode reacts earlier. It triggers when the high or low crosses the boundary during the live candle. The recorded extreme cannot retract, but price can still close back inside the level, so Wick mode will naturally include more intrabar fakeouts. Breakout Buffer adds an optional ATR-based distance beyond the level. Leave it at zero for the exact boundary, or raise it if very small breaks are not useful for your chart. By default: A resistance breakout prints an upward blue triangle below the candle. A support breakout prints a downward orange triangle above the candle. The marker colours are fully adjustable. Retests and role reversals After resistance breaks, the script waits to see whether price can retest it as support. After support breaks, it watches for the same level to act as resistance. RS means old resistance has been confirmed as new support. SR means old support has been confirmed as new resistance. Reversal Confirmation controls what counts as a retest: Close (default) requires the retest candle to touch the original zone and close back beyond the whole zone on the new-role side. Touch accepts any later overlap with the zone. It is more sensitive and less strict. Once confirmed, the new role stays fixed. An RS level remains tracked as support; it does not turn red merely because the latest candle happens to sit below it. When a flip fails A flipped level is removed when a confirmed candle closes through the far side of its zone. In other words, RS support fails below the zone and SR resistance fails above it. If Show Reversal Failures is enabled, an ✕ marks the failure candle. The flipped line stops there, but the cross stays on the chart as a record of where the level died. That is why a failure cross can appear without a continuing line. Breakout triangles and failure crosses use the original pivot as their Lookback anchor. This keeps their expiry on the same structural clock as the level they came from instead of giving every marker a new lifetime from its event candle. Reading the chart R1 is the nearest active resistance above price, followed by R2, R3, and so on. S1 is the nearest active support below price, followed by S2, S3, and so on. RS marks a confirmed resistance-to-support flip. SR marks a confirmed support-to-resistance flip. Triangles mark breakouts. Crosses mark failed flips. A breakout marker is an event, not an entry instruction. I find the retest more useful than the first break, but how it is traded still depends on trend, execution, and risk rules outside this indicator. Lines, zones, and historical placement Historical Level Start decides where an original level begins: Confirmation (default) starts it on the bar where the pivot became known in real time. Pivot extends it back to the swing candle. This is useful for visual context, but the level was not available on that earlier candle. Display as Zones replaces the single-price lines with the original pivot-wick range. If that level flips, the same price range is preserved; the zone is not moved to the opposite side of the price. Colours The Colors group separates colours by purpose, so changing a label does not force the matching line to use the same colour. Resistance and support lines/zones. RS and SR lines/zones. Resistance, support, RS, and SR price labels. Resistance and support breakout triangles. Support and resistance failure crosses. Zone fills and borders use transparent versions of the selected line colour so candles remain visible underneath. Alerts Seven alert conditions are included: Resistance Breakout Support Breakout Resistance to Support Flip Support to Resistance Flip Flipped Support Failed Flipped Resistance Failed Any S/R Event The combined alert is useful when one alert should cover every structural event. Separate conditions are available when different actions are needed for breaks, flips, or failures. A sensible starting setup The defaults use Close confirmation for both breakouts and retests. Start there if you prefer signals that wait for the candle to finish. Wick breakout and Touch retest are available when earlier, more sensitive reactions are more important. If the chart feels crowded, try increasing Pivot Length, increasing Merge Distance, enabling the Wick Dominance Filter, or reducing Maximum Levels per Type. Settings should be adjusted for the instrument and timeframe rather than treated as universal values. Important limitations Confirmed pivots always arrive late by Pivot Length bars. That is how pivot confirmation works, not a hidden predictive signal. Pivot historical placement back-draws a confirmed level for context. Use Confirmation placement when real-time availability matters. Wick mode can mark a breakout that later closes back inside the level. The current-bar drawings rebuild while the candle updates. The script uses chart data only. It does not request higher-timeframe data or use lookahead. It does not place orders, calculate position size, or guarantee that a level will hold. Use it as a structure tool, then apply your own trade plan and risk management.
Indicator
by AlphaPine
2
Candlestick Edge Auto-Preset MTF Self-CalibratingCandlestick Edge only fires a candlestick pattern when it is "rightly placed" — confirmed by a higher-timeframe trend AND by where price sits in the developing volume profile. Then it does what most pattern tools don't: it forward-tests every signal and reports the MEASURED edge per pattern, so you read realized performance instead of a marketing claim. WHY THIS IS ONE TOOL (not a bundle) The parts answer one question about one candle: "is this pattern in a place that has historically paid, and does it beat a coin-flip here?" PATTERN detection says WHAT printed (24 classic candlestick patterns). HTF ALIGNMENT says whether the bigger trend agrees. VOLUME-PROFILE POSITIONING says WHERE it printed — reversals only at value-area edges, naked POC, HVN support/resistance, or liquidity sweeps; continuations only through low-volume voids or on a value breakout. The CALIBRATION SPINE forward-resolves each signal with a triple barrier and reports Hit% vs a matched Base% (Edge) with a Wilson confidence interval, so a placed-and-confirmed pattern can be told apart from a small-sample fluke. One pattern substrate, one location read, one calibration spine. MEASUREMENT (the differentiator) Each signal opens at close with target = ±TP·ATR, stop = ∓SL·ATR, over a fixed horizon. The first barrier touched decides win/loss (same-bar tie counts as the stop — conservative). Base% is the unconditional same-barrier win-rate for that direction. Edge = Hit% − Base%; a "*" marks rows whose Wilson 95% lower bound clears the base rate. A leave-one-out row prices each filter's marginal contribution, and a footer lists only the patterns that are green AND have enough samples to trust in the current configuration. AUTO PRESET (default on) Candlestick edges are timeframe-specific. Auto Preset reads the chart's timeframe and switches on the pattern subset plus higher-timeframe distance that performed best for that timeframe in the author's study of NSE index futures, and forces the two filters on. Turn it OFF for full manual research mode: all 24 patterns selectable, filters and HTF distance (3x / 5x / 15x / custom) under your control. Nothing is ever removed — the preset only curates which patterns are active by default per timeframe. HOW TO USE Leave Auto Preset on and read the labelled signals (teal = bullish, red = bearish, each tagged with the pattern name). Open "Show scoreboard" to see measured Edge per pattern — trust the EDGE column and the "*", never a raw hit-rate. Best behaviour is on intraday timeframes (1H and below). ORIGINALITY Standard techniques are credited below. What is original is the combination: a location-gated pattern engine whose every signal is forward-calibrated, a timeframe-adaptive auto-preset, a leave-one-out filter attribution, and an auto-surfaced tradeable set — measured edge, not asserted. NON-REPAINT Signals open on confirmed bars; triple-barrier outcomes resolve on bars AFTER the trigger; all higher-timeframe / lower-timeframe / prior-day-POC requests use lookahead_off and confirmed intrabars. Pivots used by sweeps confirm first. DATA & MARKETS Runs on any symbol that reports volume; the developing profile needs volume to be meaningful. Defaults are tuned for intraday index futures. On the Enhanced data tier the delta read uses intrabar aggregation (richer on paid plans) and auto-falls-back to an OHLCV proxy when intrabars aren't served — safe to leave on for any plan. CONCEPT CREDITS (methods operationalized — original Pine re-derivations) Candlestick patterns — Nison; pattern-performance framing per Bulkowski Market / auction profile, POC / Value Area — Steidlmayer; Dalton Bulk Volume Classification — Easley, Lopez de Prado & O'Hara (2012) Triple-barrier labelling — Lopez de Prado Wilson score interval — Wilson (1927) HONESTY / LIMITS The profile is an ATR-binned developing session profile (not tick POC). Delta is an estimate (proxy or intrabar reconstruction), not true bid/ask. Reported edge is context measured on loaded history — not a prediction or a promise. The preset defaults were tuned on one instrument over a recent window, so treat them as a well-measured hypothesis, not proven alpha. Educational tool. Not financial advice — you alone are responsible for your trading decisions.
Indicator
by Market_Logic_India
Chart Narrator [verticetrading]An analyst that writes. Chart Narrator reads your chart and describes it in plain sentences — no cryptic numbers, no jargon. ◆ WHAT IT DOES It turns the chart into a written briefing: main trend and whether the higher timeframe agrees, unusual calm or agitation in volatility, the last structural break in plain words, nearest tested support/resistance with distances in %, fresh candlestick patterns, and volume participation. Everything is summarized in a bias header with a conviction score ("BULLISH — 4 of 5 signals point the same way"). ◆ HOW IT WORKS Six evidence modules (trend + higher-timeframe confirmation, volatility ranking, market structure, merged pivot levels weighted by touches, candlestick patterns, volume vs its average) each produce a verdict and the numbers behind it. A narration engine turns them into sentences, stays silent when a module has nothing to say, and detects confluences between modules (e.g. a bullish pattern printed on a tested support) to flag higher-quality situations. With enough history it also adds a day-of-week tendency note with its sample size. ◆ HOW TO USE IT Add it to any symbol and timeframe. Read the panel top to bottom: bias first, evidence after. Set the "Bias flip" alert to receive the full written analysis when the overall picture changes. Interface in English and Spanish. ◆ WHAT MAKES IT ORIGINAL Indicators show numbers; this one explains itself. Every sentence cites its evidence, only confirmed bars are narrated (no repainting), and the panel says "mixed, no clear edge" when that is the truth. ◆ LIMITATIONS It describes the present; it does not predict. Not financial advice. ──────────────────────── ESPAÑOL — El analista que escribe Convierte el gráfico en un informe escrito: tendencia y si la temporalidad mayor la confirma, calma o agitación inusual de la volatilidad, la última ruptura estructural en palabras llanas, soporte/resistencia más cercanos con distancias en %, patrones de velas recientes y participación del volumen — todo resumido en un sesgo con puntuación de convicción ("ALCISTA — 4 de 5 señales apuntan en la misma dirección"). Seis módulos de evidencia alimentan un motor de redacción que calla cuando no hay nada que decir y detecta confluencias entre señales. Solo narra velas confirmadas (sin repintado). Interfaz en inglés y español. Describe el presente, no predice; no es asesoramiento financiero.
Indicator
by FerServellon
ICT Atlas - Execution ToolkitICT Atlas — Liquidity Execution Toolkit Use best with #ICTPulse ICT Atlas is an execution-focused visual toolkit for discretionary ICT-style futures traders. It is designed to organize session liquidity, timed intraday windows, SMT divergence, liquidity sweeps, and post-sweep market structure confirmation in one workflow. This script is not an automated trading system and does not issue buy or sell signals. Its purpose is to help traders visually follow a sequence of conditions often used in manual execution: 1. Identify session liquidity. 2. Observe whether liquidity is swept. 3. Check for SMT divergence. 4. Wait for market structure confirmation after the sweep. 5. Use the trader’s own entry and risk model. How it works The script tracks Asia, London, and New York sessions using the selected timezone. At the end of each session, it records the session high and low, then extends those levels to the right side of the chart. These levels are labeled as AH/AL, LH/LL, and NYH/NYL. Liquidity sweep detection is based on price interacting with those stored session levels. The user can choose between a simple wick-touch condition or a stricter wick-and-close-back condition. This allows the trader to decide whether a sweep should mean only that price traded through a level, or that price traded through the level and then rejected back inside it. The SMT module compares the active chart symbol with a user-selected comparison symbol. It uses pivot highs and pivot lows to detect divergence between the two markets. A bearish SMT condition appears when one market makes a higher high while the comparison market does not confirm. A bullish SMT condition appears when one market makes a lower low while the comparison market does not confirm. The MSS/BOS confirmation module only becomes relevant after a liquidity sweep. After a valid high-side or low-side sweep, the script waits for price to break a recent swing level within the configured expiry window. This is intended to separate simple liquidity touches from situations where structure later confirms a possible shift. The micro-box module highlights recurring intraday timing windows from :50 to :10 using the selected timezone. During each micro window, the script tracks the high, low, and midpoint of that window, allowing traders to study reactions around specific time-based execution windows. Main features * Asia, London, and New York session tracking * Previous session high and low levels * AH/AL, LH/LL, and NYH/NYL labels * Liquidity sweep labels * Wick-touch or wick-and-close-back sweep modes * SMT divergence using a comparison symbol * Post-sweep MSS/BOS confirmation * ICT-style micro timing boxes from :50 to :10 * Optional alerts for sweeps and structure confirmation * Adjustable colors, line widths, lookbacks, and object limits How to use it ICT Atlas is best used on lower timeframes such as 1-minute, 3-minute, and 5-minute charts. Suggested workflow: 1. Mark the latest session highs and lows. 2. Watch for a sweep of Asia, London, or New York liquidity. 3. Check whether SMT divergence is present between the chart symbol and the comparison symbol. 4. Wait for MSS/BOS confirmation after the sweep. 5. Apply your own entry model, invalidation, and risk management. This script is intended for educational and analytical use only. It does not provide financial advice, trade recommendations, or guaranteed outcomes. Futures and financial market trading involves risk.
Indicator
by sakamoah
Super Crooks Daily Highs/Lows█ OVERVIEW This indicator plots current day high/low and previous day highs/lows. It can be cumbersome to mark out daily highs/lows when checking for daily swing points and closures every day . This indicator simplifies that process by marking these levels out automatically. All levels can be seen on the daily timeframe and lower timeframes. █ CONCEPTS Adds CDH/CDL lines/labels to point out Current Day High and Current Day Low Adds PDH/PDL lines/labels to point out Previous Day High and Previous Day Low Adds PDH n /PDL n lines/labels where n is a number denoting extra previous days (e.g., PDH1, PDL1 denoting Previous Day High/Low 1 day before PDH/PDL. █ HOW TO USE Add the Super Crooks Daily Highs/Lows indicator to your PulseWire charts Open the indicator's settings and select your preferred options Watch your charts to see the indicator plot CDH, CDL, PDHs, and PDLs █ FEATURES Labels and lines drawn in real time Levels are show across daily timeframes and lower timeframes Configuration options (e.g., show n previous days)
Indicator
by crookse
Doji Volume Directional Trigger (v6 Clean)Doji Volume Directional Trigger identifies high-probability momentum shifts by looking for a specific three-part confirmation on the close of a bar: - The Candlestick: A clear Doji pattern (tight body relative to its full range). - The Color Flip: A sudden direction change (e.g., a green Doji immediately following a red candle). - The Volume Surge: Confirming institutional presence by requiring current volume to exceed the previous bar. Perfect for catching explosive reversals and breakouts early on any timeframe. Includes built-in visual shapes and standard alert triggers.
Indicator
by Saboteur_Gigante
JJB OTT Alert RelayJJB OTT Alert Relay A bridge indicator that exposes Optimized Trend Tracker (OTT) Buy/Sell signals as alert conditions for automated webhook notifications. 🔍 What This Does The Optimized Trend Tracker by PulseWire generates clean Buy/Sell crossover signals but doesn't expose alertcondition() natively. This relay indicator mirrors the OTT's Support and OTT lines, detects crossovers, and surfaces them as alert conditions — so you can catch signals via webhook, email, or push without watching the chart. 🟢 Buy Signal: Support line crosses above OTT line 🔴 Sell Signal: Support line crosses below OTT line ⚙️ Setup (One-Time, 60 Seconds) 1. Add both indicators to your chart: The original Optimized Trend Tracker (Community Script) This JJB OTT Alert Relay 2. Wire the inputs: Open JJB OTT Alert Relay → Settings → Inputs Set "Support Line" → #1 Optimized Trend Tracker: Support Line Set "OTT Line" → #1 Optimized Trend Tracker: OTT 3. Verify the match: Both indicators should show identical Support and OTT values in the Data Window. If they match, the relay is wired correctly. 🔔 Creating the Alert Open PulseWire's Alert dialog Condition → "Any alert() function call" Select "JJB OTT Alert Relay" as the source Paste your webhook URL Use this JSON message template: {"topic":"JJB BTC OTT","title":"BTC OTT {{strategy.order.action}}","message":"OTT Signal: {{strategy.order.action}} | Price: {{close}} | Interval: {{interval}}","tags": ,"passphrase":"YOUR_WEBHOOK_PASSPHRASE"} Replace YOUR_WEBHOOK_PASSPHRASE with your actual webhook passphrase. The {{strategy.order.action}} placeholder resolves to "buy" or "sell" on each crossover. Set expiration (default 30 days) and create. 💡 One alert covers both signals. No need for separate buy/sell alerts. 📊 Signal Logic Condition Signal Meaning Support ↑ crosses above OTT 🟢 BUY Trend turning bullish Support ↓ crosses below OTT 🔴 SELL Trend turning bearish This is a trend-following system — signals are infrequent (typically 2-4 per quarter on daily timeframe) but high-quality. Each signal confirms a structural shift, not noise. 📌 Tips Daily timeframe is the sweet spot — lower timeframes generate more noise The relay mirrors the original OTT exactly — it doesn't recalculate If you change OTT's settings, the relay picks them up automatically via the wired inputs The plot on your chart confirms the wiring: green line = Support, blue line = OTT 🔧 Requirements Original Optimized Trend Tracker indicator on the same chart Basic Pine Script v5+ (PulseWire) Author: JJB | Version: 1.0
Indicator
by bankjjb4
BreakStar - AshishBreakStar — Breakout & Morning/Evening Star Signal Filter Two entry triggers, one unified label: 🟡 BUY (Breakout) — close above the N-bar highest close (close-based Donchian, not high/low — avoids wick-poisoning the channel) on above-average volume. 🟡 BUY (Morning Star) / 🔵 SELL (Evening Star) — classic 3-candle reversal: long directional candle → small star candle → confirmation candle closing ≥50% back into the first candle's body. The 50% penetration threshold is kept strict — it's the core of Bulkowski's documented 78%/71% historical reliability for these patterns. Exit logic — ATR-tiered trailing stop: Initial buffer → Chandelier trail (2.5×ATR) → Breakeven lock at 3×ATR profit → Tight trail at prior candle's low at 5×ATR profit. If an opposing reversal pattern fires while in profit, position closes immediately rather than waiting for the trail to catch up. How to use it: BreakStar is a first-pass filter, not a mechanical auto-trading system. Apply it to a pre-screened watchlist via Pine Screener. The resulting shortlist — typically 2-10 names per day — then goes through your own judgment layer. That human layer is where the real edge lives, not in trading every signal blindly. What it is not: Not a trend-following MA system. Not a mean-reversion band tool. Blind continuous backtesting produces mediocre results on any single name — as it does for virtually any signal-based filter run without judgment or market-regime context.
Indicator
by ashishpearce23
1
Engulfing Pro by INTELA Engulfing Pro by INTELA 📘 What is an Engulfing Pattern? An Engulfing Pattern is a two-candle formation signaling a potential trend reversal. It consists of two consecutive candles: Bullish Engulfing: occurs after a downtrend. The green (bullish) candle completely engulfs the previous red (bearish) candle, suggesting an upward reversal. Bearish Engulfing: occurs after an uptrend. The red (bearish) candle completely engulfs the previous green (bullish) candle, suggesting a downward reversal. ⚙️ Script Implementation The Engulfing Pro by INTELA indicator automatically detects these patterns and marks them with triangles on the chart. It also includes filters to enhance accuracy: Time Filter: restricts detection to a user-defined time range. Volume Filter: requires current candle volume to exceed the previous one. Body Filter: ensures the current candle body is proportionally larger than the previous one. 🧩 User Inputs Timezone: time zone used for the time filter. Start Hour / End Hour: time range for signal detection. Body Bigger than: comparison factor between current and previous candle body (e.g., 1.2 means 20% larger). Color Bullish Signal: color of the bullish triangle. Color Bearish Signal: color of the bearish triangle. 🎨 Style Options In the Style tab of PulseWire, users can customize: Shapes: adjust triangle color and size. Mode: choose position (Absolute, Above bar, Below bar). Output Values: show or hide values on the price scale. Input Values: show or hide input parameters in the status bar. 🧠 Conclusion Engulfing Pro by INTELA is a professional tool for traders seeking precise reversal pattern detection. Its time, volume, and body filters minimize false signals and allow full customization to match any trading style.
Indicator
by INTELA
1
Real-time market data and financial news In-depth global business and economic analysis Live stock quotes and portfolio tools
Link Terkait
Live stock quotes and portfolio tools
Comprehensive trading education and market insights