Liquidity Reaper [JOAT]Tracks resting liquidity at swing extremes and signals the reversal when that liquidity is raided and rejected.
◆ WHAT IT IS
Price frequently pushes just beyond an obvious swing high or low — running the stops resting there — and then snaps back. Liquidity Reaper is built to detect that specific sequence: a sweep of a liquidity pool followed by a confirmed rejection , with volume backing the move. Each confirmed raid produces a reversal signal and a complete trade framework.
This is 100% original code, written from scratch. It does not copy or repackage any other author's work.
◆ HOW IT WORKS
1. Liquidity pools. Confirmed swing highs and lows (using your chosen strength) are stored as live liquidity rails — the price levels where stop orders tend to cluster. Unswept rails stay drawn on the chart; the oldest are recycled so the chart never clutters.
2. The raid. When price trades through a pool intrabar, a pending sweep opens on that side and the rail is terminated at the raid bar.
3. Confirmation. The raid only becomes a signal if, within a set confirmation window, price closes back inside the level in the opposite direction. Two extra filters keep the signal honest:
• Rejection wick — the sweep must reject with a wick of at least a configurable percentage of the candle's range, filtering shallow pokes
• Volume expansion — the raid must occur on above-average volume, so passive drifts are ignored
4. The zone. Each confirmed raid paints a swept zone across the raided range (pool level to wick extreme) — a reference area price often reacts to again.
◆ WHAT YOU SEE
• Liquidity rails at unswept swing highs (upside liquidity) and lows (downside liquidity)
• RAID BUY / RAID SELL labels showing the relative volume of the raid
• Painted swept zones on every confirmed raid
• A full TP/SL framework — entry, stop, TP1–TP3, risk/reward fills — that self-closes on a stop or final target
• A resizable dashboard reporting live pool counts each side, the nearest pool above and below with its ATR distance, pending-sweep status, raid history, and open position
◆ HOW TO USE IT
• The rails show where liquidity rests — natural draw-on-liquidity targets and reaction levels even before any signal.
• A RAID signal marks a completed sweep-and-reject; treat it as a potential reversal from that extreme.
• Swept zones are useful for re-entries and for placing stops beyond the wick.
• Works on all symbols and timeframes. Increase swing strength and the wick filter for major structure only; loosen them for active intraday sweeps.
◆ NOTES & LIMITATIONS
Use on standard candlestick charts . Sweep detection needs a genuine volume feed for the volume filter to be meaningful (disable it on symbols without volume). Signals are decision-support only — they are not financial advice and cannot guarantee a reversal will follow. Always apply your own risk management.
— made with passion by officialjackofalltrade
Indicator
Indicator
[JOAT] Apex Flow EngineApex Flow Engine
A volatility-adaptive trend-flow engine that only signals when the move has measurable quality behind it.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
◆ WHAT IT IS
Apex Flow Engine tracks the market's underlying flow — the direction price is genuinely travelling once noise is stripped out — and grades every potential entry against a transparent Flow Quality score before a signal is ever printed. It is built to keep a chart clean while still giving a full trade framework: entry, stop, and three take-profit targets.
This is 100% original code. It does not reuse or repackage anyone else's script.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
◆ HOW IT WORKS
1. The Flow Baseline. Instead of a fixed moving average, the baseline is an efficiency-weighted adaptive average . It measures how much net directional travel price achieved versus how much raw movement it burned to get there (an efficiency ratio). When price moves cleanly, the baseline speeds up and hugs price; when price chops sideways, it slows and flattens. This keeps the reference honest in both trending and ranging conditions.
2. The Flow Envelope. An ATR-scaled band is wrapped around the baseline. A flow flip is only registered when price closes beyond the opposite band for a configurable number of confirmation closes — this filters the marginal pokes that create false flips on lower timeframes.
3. The Flow Quality score (0–100). Every flip is scored on four independent components before it becomes a signal:
• Momentum alignment — is momentum pushing in the flip direction
• Volume pulse — is participation expanding versus its own average
• Candle structure — did the trigger candle close with a decisive body
• Efficiency — how clean the underlying move is
A signal fires only if the score meets your minimum threshold, so weak, low-conviction flips are skipped.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
◆ WHAT YOU SEE
• BUY / SELL labels carrying the live Quality score plus an efficiency and volume read at the moment of the signal
• A full TP/SL framework on every signal — entry line, stop-loss, TP1 / TP2 / TP3, and shaded risk/reward zones — that automatically stops updating once the stop or the furthest target is reached
• An optional gradient flow ribbon whose intensity scales with Quality, and three candle-coloring styles (Gradient, Solid, Two-Tone)
• A resizable command dashboard with block-meter gauges for Quality, Efficiency, Volume, Body and Stretch, plus live position and stop readouts
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
◆ HOW TO USE IT
• Trade in the direction of the current Flow State . Treat higher-Quality signals as higher-conviction.
• The Stretch (ATR) reading shows how far price has extended from the baseline — large values warn that a pullback may be near before entering late.
• Use the built-in SL and TP levels as a structured plan, or as a reference for your own risk model.
• Works on all symbols and all timeframes. Raise the confirmation closes and minimum Quality on fast intraday charts for fewer, cleaner signals.
◆ SETTINGS THAT MATTER
• Flow Baseline Length / Acceleration — responsiveness of the core
• Envelope Width + Confirmation Closes — how strict a flip must be
• Minimum Quality Score — the signal gate
• TP/SL group — ATR or percent stops, and independent R:R per target
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
◆ NOTES & LIMITATIONS
Apply the indicator to standard candlestick charts . Signals are decision-support tools that describe current conditions — they are not financial advice and no indicator can predict the future or guarantee an outcome. Always combine with your own analysis and risk management.
— made with passion by officialjackofalltrade
Indicator
Volume Delta Pressure [JOAT]Volume Delta Pressure estimates how much of each bar's volume was buying versus selling, then turns that split into a clean read on who is actually in control. It combines a per-bar delta engine, a cumulative session delta line, a normalized pressure oscillator, gradient candle heat, VWAP bands, and a full on-chart dashboard — so order flow becomes something you can see at a glance instead of guessing.
▎ WHAT IT DOES
It reconstructs buy/sell volume for every candle, tracks the running net delta across the session, and measures whether current flow is stretched into Accumulation or Distribution . From that it colors your candles by pressure, prints cooldown-gated BUY/SELL labels, flags CVD/price divergences, and reports the full picture in a top-corner panel.
▎ HOW IT WORKS
• Delta engine — Two methods. Lower-TF Intrabar polls a smaller timeframe, signs each intrabar by its direction (up = buy, down = sell, doji split), and sums the volume. Range/Body Proxy splits chart-bar volume using where close sits inside the bar's range blended with candle-body direction. Auto uses intrabar data when available and falls back to the proxy everywhere else.
• Bar delta — Buy volume minus sell volume for the current candle, plus buy% / sell% of total bar volume.
• CVD — Cumulative volume delta that adds each bar's delta and resets on your chosen anchor (session/day, week, month, or never).
• Pressure oscillator — Delta is EMA-smoothed, then normalized either as a Z-Score against its rolling mean/stdev (roughly −3..+3) or as % of Volume (−100..+100). This single value drives the state, gauge, and candle color.
• Signals — A BUY fires when pressure crosses up through zero; a SELL when it crosses down. Each flip must also pass a delta-expansion filter (absolute delta above a multiple of its recent average), optional price confirmation (up close for buys, down close for sells), an optional divergence requirement , and a cooldown that blocks stacked same-side signals. Signals only confirm on bar close.
• Divergence — Pivot highs/lows on price are compared against CVD at the same pivot. Price lower-low with CVD higher-low prints a Bull Div ; price higher-high with CVD lower-high prints a Bear Div . Each stays "active" for a set number of bars.
• VWAP + σ bands — Anchored VWAP with inner and outer standard-deviation channels, tinted green above / red below.
• No-volume guard — On assets that report no volume, signals switch off and the dashboard shows a clear notice instead of printing misleading data.
▎ HOW TO USE IT
• Read candle heat first: deep green = strong net buying, grey = balanced, deep red = strong net selling. Candles flash full color on a confirmed signal.
• Treat BUY / SELL pills as flow-flip alerts, not standalone entries. They are strongest when they agree with the CVD trend and VWAP location.
• Use CVD to judge conviction behind a move — price up while CVD falls warns the push is thin.
• Divergence labels mark spots where price and delta disagree — useful for anticipating exhaustion or reversal.
• Trade with the VWAP channel : above VWAP favors longs, band edges mark stretched conditions and mean-reversion zones.
• For fewer, higher-quality signals, turn on Require CVD Divergence and keep price confirmation on.
▎ KEY SETTINGS
• Engine — Delta method, intrabar timeframe (auto or manual), proxy close-vs-body weight, and delta smoothing.
• Pressure Oscillator — Normalization mode, lookback, and the Accumulation / Distribution thresholds.
• CVD & Divergence — Reset anchor, pivot length, recency window, and label caps.
• Signals — Expansion multiplier and baseline, price/divergence requirements, cooldown, and label size/cap.
• VWAP — Source, anchor, inner/outer σ multipliers, and colors.
• Visuals — Gradient candle toggle, saturation points, and the buy/neutral/sell color set.
• Dashboard — Show/hide, position, and text size.
▎ DASHBOARD
A top-right gradient panel reporting: delta source (LTF or Proxy), bar delta, session/cumulative CVD and its trend, buy% and sell%, the pressure value, a segmented flow gauge, the current State (Accumulation / Distribution / Neutral), active divergence, dominant side, VWAP location, and the last active signal — each cell color-coded by side.
▎ ALERTS
• Buy Pressure Flip — fires on a confirmed BUY signal.
• Sell Pressure Flip — fires on a confirmed SELL signal.
▎ NOTES
• Works on all timeframes and assets that report volume; degrades gracefully where volume is absent.
• Signals confirm on bar close, so labels and alerts do not repaint after the bar completes.
• Every visual layer — candles, VWAP, labels, dashboard — toggles independently for a clean chart.
• Delta is an estimate reconstructed from price and volume, not exchange-reported order flow.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results. Always do your own analysis and manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
SMT Divergence Matrix [JOAT]════════════════════════════════
SMT DIVERGENCE MATRIX
════════════════════════════════
Smart Money Technique divergence, automated. This tool watches your chart symbol against up to two correlated reference assets and flags the moment they disagree at a swing — the classic footprint of one market failing to confirm another. When your chart carves a new low that a correlated market refuses to match, that non-confirmation is highlighted as a potential turn.
▎ WHAT IT DOES
It compares swing highs and lows on your chart to the same swings on two reference instruments and looks for SMT divergence — where the assets normally move together but split at a pivot. Each qualifying event is drawn as a connector line between the two chart pivots, tagged with a BUY or SELL pill, and paired with an optional ATR-based stop and target zone. A dashboard reports live correlation, structure, and which reference triggered.
▎ HOW IT WORKS
• Swing detection — confirmed pivot highs and lows are located on the chart using a configurable left/right pivot length . Larger values isolate more significant swings.
• Reference sync — the same high/low/close series are pulled for up to two reference assets on your chart's timeframe, guarded against invalid symbols.
• Bullish SMT — the chart prints a lower low while a correlated reference prints a higher low . That failure to confirm the downside is read as bullish non-confirmation.
• Bearish SMT — the chart prints a higher high while a correlated reference prints a lower high , reading as bearish non-confirmation.
• Either reference can trigger — a signal fires from whichever asset fails to confirm; the dashboard shows REF1, REF2, or both.
• Correlation filter — rolling correlation between chart and reference is measured over a lookback. SMT only makes sense when assets normally track together, so signals can be restricted to references whose correlation is currently at or above a minimum.
• Confirmation filter — the triggering bar can be gated by RSI momentum turning in the signal direction, by a directional candle close, by both , or by nothing.
• Cooldown — a minimum bar gap between same-direction signals prevents clustering, and the engine never fires a buy and sell on the same bar.
• Trade zones — on each signal, entry is taken at the close, stop is placed a chosen ATR multiple away, and the target is projected at your risk/reward ratio. The zones live-extend to the right each bar and freeze the moment price touches the stop or target.
▎ HOW TO USE IT
• Set Reference Asset 1 and 2 to instruments that genuinely correlate with your chart (index futures, sector peers, a lead/lag pair). The technique is only meaningful when the assets normally move together.
• A BUY pill below price marks bullish non-confirmation; a SELL pill above price marks bearish non-confirmation. The pill text names the reference that triggered.
• The divergence line connects the two chart pivots involved, so you can see the exact swings being compared.
• Treat the red zone as risk (entry-to-stop) and the blue/violet zone as reward (entry-to-target). Use them as a visual framework, not a mechanical order.
• Combine signals with your own read of market structure, session timing, and key levels rather than trading them in isolation.
▎ KEY SETTINGS
• Engine — swing pivot length, the two reference symbols and their enable toggles, and correlation lookback.
• Filters — confirmation mode (None / RSI / Candle / Both), RSI length, positive-correlation requirement with a minimum threshold, and signal cooldown.
• Trade Model — show ATR SL/TP toggle, ATR length, stop distance in ATR multiples, risk/reward target, and a cap on drawn setups for performance.
• Visuals — divergence lines, signal labels, pivot markers, label size, custom bull/bear colors, an optional candle zone-reader, and a session VWAP with ±σ bands.
• Dashboard — show toggle, position, and text size.
▎ DASHBOARD
The panel reports correlation state and value for each reference (Strong+, Positive, Weak, Negative, Strong−, or OFF), the last SMT side with the triggering reference, current market structure (HH / HL / LH / LL), running bull/bear counts , total divergences , live signal status , and current ATR .
▎ ALERTS
• Bullish SMT — chart lower low versus a correlated higher low.
• Bearish SMT — chart higher high versus a correlated lower high.
Both include ticker and interval placeholders in the message.
▎ NOTES
• Works on any symbol and any timeframe; references are read on the chart's own timeframe.
• Signals are based on confirmed pivots, which require the configured right-side bars to close before a swing is validated.
• Colored candles and VWAP bands are off by default for a clean chart, and the drawn-setup cap keeps performance stable.
• Reference data uses non-lookahead requests and tolerates invalid symbols without breaking the script.
For research and education only. This is not financial advice. No indicator predicts the future, on-chart signals and counts are illustrative of historical behavior only, and past behavior does not guarantee future results. Always manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
Range Breakout Pro [JOAT]═══ RANGE BREAKOUT PRO ═══
Range Breakout Pro is a universal breakout engine. It defines a reference range from the Previous Day , Previous Week , an Initial Balance window, or a Custom Session , draws that range on the chart, and only fires a trade idea when price confirms a close beyond the edge. Every signal is scored 0–10 for conviction and shipped with a full trade plan: stop, three R-multiple targets, and live outcome tracking.
▎ WHAT IT DOES
It turns a simple "price broke the range" event into a structured, filtered, and scored decision. The chosen range basis is projected onto the current period as a box with edge rails and a midline. A confirmed break becomes a clean LONG or SHORT label with a stop, TP1/TP2/TP3 zones, and a running performance panel — all built to keep the chart readable.
▎ HOW IT WORKS
— Range basis : Previous Day / Previous Week project the prior completed period's high-low forward. Initial Balance and Custom Session accumulate the high-low inside a session window (in your chosen timezone) and lock the range at the window close.
— Break detection : a bar must close beyond the range edge, not just wick through it. In direct mode the close must clear the level by a Break Buffer measured in ATR.
— Optional retest : with retest confirmation on, price must break, pull back within a tolerance of the level, then close beyond it again before a signal arms — decisive reversals back through the level cancel the setup.
— Strength score (0–10) : each candidate is graded on candle body dominance, candle range vs ATR, volume vs its average, 3- and 5-bar momentum agreement, penetration depth past the level, RSI posture, higher-timeframe trend alignment, whether it is the first break of the period, and range size vs ADR. The score maps to a ★ rank and a tier from FORMING to ELITE.
— Filters/gates : minimum strength to signal, optional "strong only" threshold, HTF EMA trend alignment (longs above, shorts below), a range-vs-ADR gate (skip ranges too tight or too wide), and a max-signals-per-period cap.
— Trade model : entry at the confirming close. Stop from Structure (opposite range edge), Mid (range midline), or ATR , with an ATR buffer plus min/max risk clamps. Targets are placed at your TP1/TP2/TP3 R-multiples off the measured risk.
— Outcome engine : each trade is tracked bar by bar for TP1/TP2/TP3, stop, or end-of-period flatten, including same-bar stop handling, and the result feeds the stats panel.
— VWAP overlay : session-anchored VWAP with ±1σ bands and an optional ±2σ outer channel, tinted to the side price is trading.
▎ HOW TO USE IT
— Pick the range basis that fits your style: intraday traders often use Initial Balance or Custom Session; swing traders use Previous Day or Previous Week.
— Wait for a LONG / SHORT label. The ★ rank and score tell you how much confluence backed that break — treat higher tiers as higher conviction.
— The entry line is the confirming close, the dashed line is the stop , and the three solid lines are targets tagged 🎯 TP1 , 🥈 TP2 , 🏆 TP3 . The green zone is the reward area; the red zone is risk.
— Use the range box, midline, and rails as context: reclaims of the midline, failed breaks, and edge retests are all readable at a glance.
— Layer the VWAP bands as confluence — breakouts extending away from VWAP with room to the outer channel read differently than breaks stalling into a band.
— Result labels (TP / SL / EOP with the R outcome) close each idea so you can review what worked.
▎ KEY SETTINGS
— Engine : range basis, session timezone, IB / custom windows, retest toggle, break/retest tolerances, max signals per period.
— Strength & Filters : ATR length, minimum score, strong-only threshold, HTF trend alignment (timeframe + EMA length), and the range-vs-ADR gate.
— Trade Model : stop basis and buffer, ATR stop distance, min/max risk caps, TP1/2/3 in R, and how many past trades to keep drawn.
— Visuals : Ice / Emerald / Mono theme, box, rails, midline, measured-move ×1/×2 guides, projection length, label size, and toggles for signal, lines, zones, level labels, and result labels.
— VWAP & Candles : VWAP source, σ multiplier and lookback, outer channel, and optional RSI-gradient candles.
— Dashboard : show/hide, position, text size, and the outcome breakdown row.
▎ DASHBOARD
A chrome-accented panel reports the active range basis, current range size and % of ADR, price vs VWAP (with σ distance), engine status (forming / armed / trade active), the active and last signal with its score, and live stats: win rate , profit factor , average R per trade, long vs short win%, best direction, total signals, current and max streaks, plus an optional TP1/TP2/TP3 · SL · EOP outcome breakdown.
▎ ALERTS
— RBP Long and RBP Short on a confirmed, filtered breakout.
— TP3 Hit , Partial TP (protected exit), SL Hit , and EOP Exit (end-of-period flatten).
▎ NOTES
— Works on any market and any timeframe.
— Higher-timeframe data uses confirmed prior values, so signals are evaluated on bar close and do not repaint after the fact.
— Clean-by-default: measured-move guides, extra rails, gradient candles, and the outer channel all sit behind toggles so you can strip the chart down or build it up.
— Drawn history (ranges and trades) is capped to keep the chart light.
This tool is for research and education only. It is not financial advice. No indicator can predict the future, and any statistics shown reflect historical signals on your chart — past behavior does not guarantee future results. Always do your own analysis and manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
Buy-Sell Signals using Multi-Logic Trading System
📈 Advanced Multi-Logic Trading System with Trend, Momentum, Breakout and Risk Management
The **Buy-Sell Signals using Multi-Logic Trend, Momentum & Breakout System** is a multi-condition trading indicator designed to help traders identify structured trading opportunities across different market environments.
Unlike a conventional indicator that depends on only one moving-average crossover or oscillator, Buy-sell with Multi-logic Trading Sytem combines:
✅ Market structure and EMA alignment
✅ Higher-timeframe trend confirmation
✅ Session VWAP positioning
✅ RSI and MACD momentum
✅ Bollinger Band positioning and volatility
✅ Volume expansion and OBV direction
✅ Range-breakout confirmation
✅ Sideways-market mean reversion
✅ Dynamic stop-loss and target calculations
✅ Signal management and cooldown controls
The objective is not to produce the maximum number of signals.
The objective is to filter market noise and highlight situations where multiple independent conditions support the same directional view.
━━━━━━━━━━━━━━━━━━━━
🧠 How the Indicator Reads the Market
Buy-sell with Multi-logic Trading Sytem continuously classifies the chart into one of four market conditions:
📈 BULLISH TREND
A bullish trend is identified when:
**Price > Fast EMA > Medium EMA > Slow EMA**
With the default settings, this represents:
**Price > EMA 20 > EMA 50 > EMA 200**
This structure indicates that short-term, medium-term and long-term price positioning is aligned in the bullish direction.
------------------------------------------------
📈 BEARISH TREND
A bearish trend is identified when:
**Price < Fast EMA < Medium EMA < Slow EMA**
With the default settings:
**Price < EMA 20 < EMA 50 < EMA 200**
This indicates complete bearish alignment across the three trend layers.
------------------------------------------------
📈 RANGE / SIDEWAYS
The system studies the previous trading range over the selected Range Lookback.
The current candle is excluded from this range calculation. This allows the indicator to identify a genuine close outside the previous range instead of comparing the breakout candle against a range that already includes it.
A market is treated as sideways when:
• The previous range width remains within the selected percentage threshold
• Complete bullish EMA alignment is absent
• Complete bearish EMA alignment is absent
------------------------------------------------
📈 Transition
The Transition condition appears when the market is neither properly trending nor qualifying as a defined range.
This commonly happens when:
• EMAs are crossing or compressing
• Price repeatedly moves around the EMA ribbon
• The previous trend is weakening
• A new trend has not yet become established
• Price is moving between range and trend conditions
Transition is usually the least reliable environment for mechanical signals.
━━━━━━━━━━━━━━━━━━━━
⚙️ The Four Entry Logic Engines
Buy-sell with Multi-logic Trading System contains four separate entry engines.
Each engine is designed for a different type of market behaviour.
📈 1. Trend-Following Logic
Trend-following logic is designed to participate in an already established directional move.
A bullish trend setup requires:
• Bullish EMA alignment
• Minimum bullish confluence score
• Higher-timeframe bullish permission
• Price above session VWAP
A bearish trend setup requires the opposite conditions.
🔷 Bullish confluence score
The bullish score contains six independent components:
1. Bullish EMA trend alignment
2. RSI positioned between 45 and 72
3. MACD above its signal line with a positive histogram
4. Price above the Bollinger Band basis
5. High volume with bullish OBV behaviour
6. A bullish candle closing above the previous structural swing high
🔷 Bearish confluence score
The bearish score also contains six components:
1. Bearish EMA trend alignment
2. RSI positioned between 28 and 55
3. MACD below its signal line with a negative histogram
4. Price below the Bollinger Band basis
5. High volume with bearish OBV behaviour
6. A bearish candle closing below the previous structural swing low
The **Minimum Trend Confluence** setting determines how many of these six conditions must agree.
🔷 When to use Trend-Following Logic
👉Use it when:
• The EMA ribbon is properly expanded
• Price is making higher highs and higher lows in an uptrend
• Price is making lower highs and lower lows in a downtrend
• Pullbacks are respecting the fast or medium EMA
• Price is consistently holding on the correct side of VWAP
• The higher-timeframe trend supports the trade direction
👉 When to avoid it
Avoid relying on trend logic when:
• EMAs are flat or repeatedly crossing
• Price is trapped inside a narrow range
• The market-condition card shows Transition
• A signal appears directly below major resistance
• A signal appears directly above major support
• Price has already completed a large impulsive move without a pullback
━━━━━━━━━━━━━━━━━━━━
📈 2. Momentum Logic
Momentum logic is designed to detect acceleration before complete trend confluence becomes necessary.
🔷For bullish momentum, the indicator looks for:
• Price above the fast EMA
• RSI above 52
• Positive MACD histogram
• MACD histogram increasing from the previous candle
• Bullish OBV positioning
• Volume confirmation when usable volume is available
• Bullish higher-timeframe permission
• Price above VWAP
🔷Bearish momentum uses the opposite conditions.
Momentum logic can respond earlier than full trend logic because it does not require the complete EMA 20–50–200 alignment or the minimum six-part trend score.
👉 When to use Momentum Logic
Momentum logic is most useful when:
• Price is emerging from consolidation
• A fresh intraday directional move is developing
• Volume is expanding with price
• MACD momentum is accelerating
• Price has reclaimed or rejected VWAP decisively
• A pullback is followed by renewed directional strength
• The higher timeframe already supports the intended direction
👉 When to avoid it
Avoid momentum entries when:
• The momentum candle is unusually extended
• Price is entering a major higher-timeframe supply or demand zone
• Volume expansion is caused by a news spike
• MACD is positive but price structure remains weak
• Price repeatedly crosses VWAP
• The chart has unreliable or unavailable volume data
Momentum logic is especially dependent on meaningful volume and OBV behaviour. It is therefore generally better suited to liquid stocks, indices, futures and other actively traded instruments.
━━━━━━━━━━━━━━━━━━━━
📈 3. Range-Breakout Logic
The breakout engine is designed to identify confirmed movement outside a previously established range.
It does not trigger merely because price trades a few ticks outside the range.
A bullish breakout requires:
• The previous market qualified as a range
• Price closes above the previous range high
• The close exceeds the range by the selected ATR buffer
• The previous candle had not already closed above the range
• The breakout candle closes strongly toward its high
• RSI is above 50
• MACD is bullish
• Volume confirms the move when available and required
• Price is above VWAP
The bearish breakout logic uses the opposite conditions.
🔷 Breakout Confirmation Buffer
The ATR buffer prevents the system from treating a marginal move above or below the boundary as a valid breakout.
A value of **0.15 ATR** means price must close beyond the range boundary by an additional 15% of the current ATR.
Increasing this value creates fewer but more selective breakout signals.
🔷 Breakout Candle Close Position
The candle must also close strongly in the breakout direction.
With a value of **0.60**:
• A bullish breakout candle must close in the upper 40% of its total range
• A bearish breakout candle must close in the lower 40% of its total range
This helps reject candles that break a level intrabar but leave a large rejection wick.
🔷 Important HTF behaviour
The higher-timeframe EMA filter directly controls the Trend and Momentum engines.
The Range-Breakout engine instead uses its own range, ATR, candle-strength, RSI, MACD, volume and VWAP confirmation.
Therefore, traders should still manually inspect the higher-timeframe structure before accepting a breakout signal.
👉 When to use Breakout Logic
Use breakout logic when:
• Price has formed a clean and visible range
• Range boundaries have been tested multiple times
• Bollinger Band width has contracted before expansion
• Volume increases during the breakout
• The breakout candle closes outside the level
• There is sufficient room before the next major structure
• VWAP supports the breakout direction
👉 When to avoid it
Avoid breakout entries when:
• The range is poorly defined
• Price is breaking directly into higher-timeframe resistance or support
• The breakout candle leaves a large rejection wick
• Volume is weak or declining
• Price has already moved far beyond the range before entry
• The breakout occurs during an irregular news candle
• The range threshold is set too loosely and ordinary price movement is being classified as consolidation
━━━━━━━━━━━━━━━━━━━━
📈 4. Sideways Mean-Reversion Logic
Mean reversion is disabled by default because it represents a different trading philosophy from trend-following.
Instead of expecting price to continue moving away from fair value, this engine looks for rejection near the outer areas of a sideways range.
The range is divided into zones:
• Lower reversion area near the bottom 20% of the range
• Upper reversion area near the top 20% of the range
A bullish mean-reversion setup requires:
• Mean-reversion logic enabled
• Market classified as sideways
• Range sufficiently wide relative to ATR
• Price testing the lower reversion zone
• Price closing back above that zone
• A bullish rejection candle
• A sufficiently large lower wick
• RSI below 38
• RSI turning upward when the RSI-turn filter is enabled
• Volume permission
A bearish mean-reversion setup requires the opposite conditions near the upper range zone, with RSI above 62 and turning downward.
🔷 Important Mean-Reversion Behaviour
Mean-reversion trades are intentionally based on sideways-market rejection.
They do not use the higher-timeframe trend or VWAP filter in the same way as the Trend and Momentum engines.
This is logical because a range-fading trade may temporarily move against the prevailing higher-timeframe direction.
However, it also means mean-reversion mode should be activated only when the trader has independently confirmed that the market is genuinely balanced and range-bound.
👉 When to use Mean Reversion
Use it when:
• The market has clear horizontal boundaries
• EMA alignment is absent
• Price repeatedly rejects both sides of the range
• The range is wide enough to offer practical reward
• RSI reaches an extreme and begins turning
• The rejection candle closes back inside the range
• No major breakout catalyst is expected
👉 When not to use it
Disable mean reversion when:
• The market is strongly trending
• The EMA ribbon is expanding
• Price is forming one-sided momentum candles
• Volume is increasing near the range boundary
• A breakout is supported by broader-market direction
• Price is repeatedly pressing one boundary without meaningful rejection
Repeated testing of one range boundary can represent pressure accumulation rather than a reversal opportunity.
━━━━━━━━━━━━━━━━━━━━
🔍 Higher-Timeframe Trend Filter
The higher-timeframe filter compares price with an EMA calculated on the selected higher timeframe.
👉When enabled:
• Long Trend and Momentum setups require bullish HTF positioning
• Short Trend and Momentum setups require bearish HTF positioning
The higher-timeframe calculation is designed to use confirmed information rather than future-looking data.
🔷 Suggested timeframe combinations
These are practical starting points and should be tested for each instrument:
• 3-minute chart → 15-minute or 30-minute HTF
• 5-minute chart → 30-minute or 60-minute HTF
• 15-minute chart → 60-minute or 4-hour HTF
• 30-minute chart → 4-hour HTF
• 1-hour chart → 4-hour or Daily HTF
• 4-hour chart → Daily or Weekly HTF
A closer HTF produces more opportunities.
A larger HTF produces fewer but more structurally selective opportunities.
━━━━━━━━━━━━━━━━━━━━
📍 Session VWAP Filter
VWAP acts as the indicator’s intraday fair-value reference.
👉When enabled:
• Long Trend, Momentum and Breakout setups require price above VWAP
• Short Trend, Momentum and Breakout setups require price below VWAP
This reduces situations where a bullish technical setup appears below intraday fair value or a bearish setup appears above it.
👉Keep VWAP enabled when:
• Trading intraday
• Trading indices or liquid stocks
• Trading momentum continuation
• Trading opening-range or consolidation breakouts
• Filtering counter-directional entries
👉 Consider disabling VWAP when:
• Trading higher timeframes where session VWAP has less relevance
• Trading instruments with irregular sessions
• Testing a pure swing-trading model
• Using another manually defined fair-value framework
Disabling VWAP increases flexibility but may also increase counter-directional signals.
━━━━━━━━━━━━━━━━━━━━
📊 Volume and OBV Confirmation
The indicator compares current volume with its moving average.
With the default multiplier of **1.5**, high volume means the current volume is at least 1.5 times the selected average volume.
OBV is then compared with its own moving average to determine whether cumulative volume behaviour supports buyers or sellers.
The system is designed so that missing volume does not automatically block every setup.
However, symbols with reliable exchange volume are preferred, particularly when using Momentum Logic.
🔷 Volume Multiplier Interpretation
• 1.20–1.40: More responsive, but more noise
• 1.50: Balanced default
• 1.70–2.00: Strong expansion required
• Above 2.00: Very selective and mainly suited to exceptional participation
━━━━━━━━━━━━━━━━━━━━
🛡️ Stop-Loss and Target Engine
Every confirmed signal creates an active entry, stop-loss and target.
The indicator provides three stop-loss methods.
🔷 Structure + ATR
👉For a long trade:
The stop is placed below the previous structural swing low with an additional ATR buffer.
👉For a short trade:
The stop is placed above the previous structural swing high with an ATR buffer.
This is generally the preferred method for price-action and structure-based trading.
🔷ATR Stop
The stop is calculated using a fixed ATR multiple from the entry.
This method adapts to current volatility without depending on the location of a previous swing.
It can be useful for:
• Momentum setups
• Instruments with irregular swing structures
• Fast-moving markets
• Systematic risk standardisation
🔷 Fixed Percentage Stop
The stop is placed at a fixed percentage from entry.
This is simple but does not adjust to changing volatility.
It should be used carefully because the same percentage may be too tight in a volatile market and unnecessarily wide in a quiet market.
━━━━━━━━━━━━━━━━━━━━
📈 Target Methods
🔷Risk-to-Reward Target
The target is calculated from the actual distance between entry and stop.
With a 1.5 risk-to-reward ratio, the target is 1.5 times the defined trade risk.
🔷 ATR Target
The target is positioned at a selected ATR multiple from entry.
This can be useful for momentum trades where price expansion is expected.
🔷 Fixed Percentage Target
The target is placed at a fixed percentage from entry.
This is straightforward but less adaptive than ATR or structure-based calculations.
━━━━━━━━━━━━━━━━━━━━
🎯 Preferred Risk Settings
🔷 Structure-Based Intraday Trading
• Stop Method: Structure + ATR
• Structure ATR Buffer: 0.15–0.25
• Target Method: Risk:Reward
• Risk:Reward: 1.5–2.0
🔷 Momentum Trading
• Stop Method: ATR
• Stop ATR Multiplier: 1.2–1.8
• Target Method: ATR or Risk:Reward
• Target ATR Multiplier: 2.0–3.0
🔷 Swing Trading
• Stop Method: Structure + ATR
• Swing Lookback: 10–20
• Structure ATR Buffer: 0.20–0.40
• Target Method: Risk:Reward
• Risk:Reward: 1.5–2.5
🔷 Mean-Reversion Trading
• Stop Method: Structure + ATR or ATR
• Use a stop beyond the rejected range boundary
• Avoid excessively wide targets
• Consider the opposite side or midpoint of the range as practical structure
These values are starting points, not universal settings. Different instruments have different volatility and structural characteristics.
━━━━━━━━━━━━━━━━━━━━
🚦 Signal-Control System
Buy-sell with Multi-logic Trading System includes several controls to prevent repeated or conflicting signals.
👉 Minimum Bars Between Signals
The cooldown prevents the indicator from producing another signal immediately after the previous one.
Default: **5 bars**
Lower values create more frequent signals.
Higher values reduce repeated entries during the same move.
👉 Fresh Setup Only
When enabled, a signal appears only when the complete setup changes from false to true.
It prevents the indicator from repeatedly signalling on every candle while the same condition remains active.
This should normally remain enabled.
👉 Wait for SL or Target Before Next Signal
When enabled, the indicator waits for the active stop or target to be touched before accepting another trade.
This creates a cleaner one-trade-at-a-time workflow.
It is the preferred setting for discretionary traders and alert-based execution.
👉 Allow Opposite Signal
This setting becomes relevant when “Wait for SL/Target” is disabled.
It determines whether an opposite signal can replace the current directional trade before the original levels are completed.
━━━━━━━━━━━━━━━━━━━━
✨ Visual Features
3D Gradient Trend Ribbon
Glow Buy and Sell Markers
Signals are generated after the chart candle is confirmed.
Entry Beam
3D Risk and Reward Zones
VWAP Glow Line
Gradient Candle Coloring
━━━━━━━━━━━━━━━━━━━━
📋 Dashboard Explained
The dashboard provides a summary of current chart conditions.
Market Condition
Bull Score and Bear Score
RSI
ATR Percentage
Volume Ratio
Bollinger Band Width
HTF Trend
VWAP
Active Trade
SL / TP
Win Rate
The dashboard win rate is an internal chart-touch statistic based on whether displayed targets or stops were reached.
For reliable validation, traders should independently review historical trades and conduct proper testing.
━━━━━━━━━━━━━━━━━━━━
🔔 Alert Features
Buy-sell with Multi-logic Trading System provides alert conditions for:
• Confirmed BUY signal
• Confirmed SELL signal
• Active stop-loss touched
• Active target touched
Dynamic BUY and SELL alerts can also include:
• Symbol
• Entry price
• Stop-loss
• Target price
Signals and dynamic alerts are generated once per confirmed candle close.
For PulseWire alerts, select the indicator and choose the required alert condition.
━━━━━━━━━━━━━━━━━━━━
📌 Preferred Logic According to Market View
👉 Strong Bullish Market
Recommended:
• Trend Logic: ON
• Momentum Logic: ON
• Breakout Logic: Optional
• Mean Reversion: OFF
• HTF Filter: ON
• VWAP Filter: ON
• Minimum Confluence: 4 or 5
Focus mainly on long signals, pullbacks and bullish consolidation breakouts.
👉Strong Bearish Market
Recommended:
• Trend Logic: ON
• Momentum Logic: ON
• Breakout Logic: Optional
• Mean Reversion: OFF
• HTF Filter: ON
• VWAP Filter: ON
• Minimum Confluence: 4 or 5
Focus mainly on short signals, failed recoveries and bearish range breakdowns.
👉 Developing Trend
Recommended:
• Trend Logic: ON
• Momentum Logic: ON
• Breakout Logic: ON
• Mean Reversion: OFF
• Minimum Confluence: 4
• Breakout Buffer: 0.10–0.20 ATR
Momentum or breakout logic may identify the move before complete EMA alignment develops.
👉 Established Trend
Recommended:
• Trend Logic: ON
• Momentum Logic: Optional
• Breakout Logic: Optional
• Mean Reversion: OFF
• Minimum Confluence: 4–5
• Structure + ATR stop
Look for continuation after controlled pullbacks rather than chasing extended candles.
👉 Clean Sideways Range
Recommended:
• Trend Logic: OFF or used cautiously
• Momentum Logic: OFF
• Breakout Logic: ON
• Mean Reversion: ON only for confirmed range rejection
• RSI Turn Requirement: ON
• Reversion Wick Ratio: 0.35–0.50
Use either range fading or breakout trading according to price behaviour—but avoid treating both as equally valid at the same moment.
👉 Transition or Choppy Market
Recommended:
• Increase Minimum Confluence
• Increase cooldown bars
• Use HTF and VWAP filters
• Keep Mean Reversion OFF unless a clear range forms
• Wait for structure to become clearer
Sometimes the best setting in a Transition market is simply to avoid trading.
━━━━━━━━━━━━━━━━━━━━
🧩 Suggested Presets
🔶 Balanced Intraday — 5 or 15 Minutes
• EMA: 20 / 50 / 200
• HTF: 60 minutes
• HTF Filter: ON
• VWAP Filter: ON
• Trend Logic: ON
• Momentum Logic: ON
• Breakout Logic: ON
• Mean Reversion: OFF
• Minimum Confluence: 4
• Volume Multiplier: 1.5
• Breakout Buffer: 0.15 ATR
• Breakout Close Position: 0.60
• Stop: Structure + ATR
• Target: 1.5 Risk:Reward
• Cooldown: 5 bars
• Fresh Setup Only: ON
• Wait for Exit: ON
🔶 Precision Intraday
• HTF Filter: ON
• VWAP Filter: ON
• Minimum Confluence: 5
• Volume Multiplier: 1.7–2.0
• Breakout Buffer: 0.20–0.30 ATR
• Breakout Close Position: 0.70–0.80
• Fresh Setup Only: ON
• Wait for Exit: ON
This preset produces fewer signals but demands stronger confirmation.
🔶 Fast Momentum Trading
• Trend Logic: Optional
• Momentum Logic: ON
• Breakout Logic: ON
• Mean Reversion: OFF
• HTF Filter: ON
• VWAP Filter: ON
• Volume Multiplier: 1.3–1.5
• Cooldown: 2–4 bars
• Stop: ATR
• Target: ATR or Risk:Reward
Fast settings should only be used on liquid instruments because they are more sensitive to lower-timeframe noise.
🔶 Range-Breakout Trading
• Trend Logic: Optional
• Momentum Logic: Optional
• Breakout Logic: ON
• Mean Reversion: OFF
• Breakout Buffer: 0.15–0.30 ATR
• Close Position: 0.65–0.80
• Require Breakout Volume: ON
• Volume Multiplier: 1.5–2.0
• VWAP Filter: ON
Manually confirm that sufficient space exists beyond the range.
🔶 Sideways Mean Reversion
• Trend Logic: OFF
• Momentum Logic: OFF
• Breakout Logic: Optional
• Mean Reversion: ON
• Minimum Range Width: 1.0–1.5 ATR
• Rejection Wick Ratio: 0.35–0.50
• RSI Turn Requirement: ON
• Fresh Setup Only: ON
• Wait for Exit: ON
Do not use this preset when the range boundary is being attacked with expanding volume.
🔶 Swing Trading — 1 Hour or 4 Hours
• EMA: 20 / 50 / 200
• HTF: 4 Hour, Daily or Weekly
• HTF Filter: ON
• VWAP Filter: Optional
• Trend Logic: ON
• Momentum Logic: ON
• Breakout Logic: ON
• Mean Reversion: Usually OFF
• Minimum Confluence: 4–5
• Swing Lookback: 10–20
• Stop: Structure + ATR
• Target: Risk:Reward
• Risk:Reward: 1.5–2.5
• Cooldown: 3–5 bars
━━━━━━━━━━━━━━━━━━━━
⛔ When Not to Use the Indicator
Avoid taking signals mechanically when:
• The market-condition card shows an unstable Transition phase
• Price is moving inside a very narrow and noisy area
• A signal is directly facing major higher-timeframe structure
• Price is highly extended from the EMA ribbon or VWAP
• The signal candle is abnormally large
• A major economic event is creating unpredictable volatility
• The selected instrument is illiquid
• Volume data is unreliable
• Bid–ask spreads are unusually wide
• The chart timeframe is too low for the instrument
• There is insufficient reward before the next support or resistance
• The stop required by structure is larger than the trader’s permitted risk
A technically valid signal is not automatically a good trade.
Location, liquidity, market context and risk remain essential.
━━━━━━━━━━━━━━━━━━━━
✅ Recommended Trading Workflow
Step 1 : Identify the market condition
Determine whether the chart is trending, ranging or transitioning.
Step 2 : Check the higher timeframe
Confirm the broader directional structure before using Trend or Momentum signals.
Step 3 : Check VWAP location
For intraday trading, prefer longs above VWAP and shorts below VWAP.
Step 4 : Read the dashboard
Compare:
• Bull and Bear scores
• RSI
• ATR percentage
• Volume ratio
• Bollinger Band width
• Higher-timeframe trend
Step 5 : Identify which logic suits the market
Do not use mean reversion in a strong trend.
Do not depend only on trend logic in an unstructured range.
Step 6 : Check trade location
Identify nearby support, resistance, previous-day levels, liquidity zones and higher-timeframe structure.
Step 7 : Evaluate risk
Check whether the displayed stop is logically placed and whether sufficient reward is available.
Step 8 : Wait for candle confirmation
Avoid anticipating a signal before the candle closes.
━━━━━━━━━━━━━━━━━━━━
⚠️ Important Notes
Buy-sell with Multi-logic Trading System is a decision-support indicator, not an automatic guarantee of profitable trades.
The indicator does not know:
• Your account size
• Your maximum permitted risk
• Whether a market-moving announcement is approaching
• Whether a nearby level is personally significant to your analysis
• Whether an option contract has suitable liquidity, delta or implied volatility
• Whether the displayed trade fits your trading plan
When several logic engines are enabled together, a BUY or SELL signal can originate from Trend, Momentum, Breakout or Mean-Reversion conditions.
The current signal marker does not separately label which internal engine generated it. The market condition, dashboard and surrounding price action should therefore be used to interpret the setup.
Always test the indicator on the intended market and timeframe before using it in live trading.
━━━━━━━━━━━━━━━━━━━━
📈 Final Perspective
Buy-sell with Multi-logic Trading System is designed around one central idea:
**Trade according to the current market regime instead of forcing the same strategy into every market.**
Use Trend Logic when structure is aligned.
Use Momentum Logic when participation and acceleration are increasing.
Use Breakout Logic when price is escaping a well-defined range with confirmation.
Use Mean Reversion only when the market is genuinely balanced and rejecting its boundaries.
The indicator can organise information, filter conditions and define structured risk—but disciplined execution, position sizing and market awareness remain the trader’s responsibility.
------------------------------------------------
**Educational use only. This indicator does not provide financial advice or guarantee future results.**
Indicator
Order Block Engine [JOAT]═══ ORDER BLOCK ENGINE ═══
Most order-block tools paint a fresh box on every candle and bury the chart. This one does the opposite. It only marks the last opposing-close candle that appears just before a genuine displacement leg — a move that closes through a confirmed swing by more than a volatility-scaled threshold, backed by a volume expansion. The result: only a handful of clean, unmitigated, high-grade zones survive on screen at once.
▎ WHAT IT DOES
It maps institutional-style order blocks, grades each one from 0 to 10 by ★ quality, extends the surviving zones to the right until price mitigates them, and fires a single clean BUY / SELL pill on a valid retest + reaction — complete with an R-multiple TP/SL zone construct. A grey/white and blue-chrome dashboard keeps the running read of structure, bias and zone quality in one corner.
▎ HOW IT WORKS
— Confirmed swing structure. Pivot highs and lows are tracked with a configurable lookback. Each swing stays "unbroken" until price genuinely closes through it.
— Displacement break. A bullish break needs an up-close candle that closes above the last swing high by more than Displacement × ATR ; a bearish break mirrors it below the swing low. ATR scaling means the threshold self-adjusts to any asset or timeframe.
— Volume confirmation. The breaking candle's volume must exceed its own moving-average baseline by the chosen multiplier. On symbols with no volume feed, this filter auto-skips.
— Order-block selection. Once a break is confirmed, the engine walks back through recent bars to find the last opposing-close candle — the down-close before a bullish break, or the up-close before a bearish break. That candle's high/low becomes the zone.
— ★ Grade (0-10). Each block is scored on three factors: how far the break displaced (in ATR), how strong the volume expansion was, and the body-to-range ratio of the origin candle. The composite maps to a 0-10 grade and a tier (WEAK → FAIR → SOLID → STRONG → ELITE).
— Mitigation & signals. Live zones extend right on each bar. If price closes fully through a zone, it is mitigated — frozen and greyed (or deleted). If instead price wicks back into the zone and the bar reacts back out with a close in the right direction, and the block's grade clears your minimum, a BUY / SELL signal fires. One signal per bar, longs take priority.
— Trade construct. On a signal the engine builds an entry line at close, a stop a buffer beyond the zone edge (× ATR), and TP1 / TP2 at your chosen R multiples — drawn as green TARGET and red RISK zone boxes that extend, then freeze when SL or TP2 is touched.
▎ HOW TO USE IT
— Treat the surviving zones as decision areas , not guarantees. A blue zone is a bullish order block; a slate zone is bearish. The ★ tag shows its grade at a glance.
— Wait for price to return into a zone. The engine only signals on a retest + reaction , so you are not chasing the initial impulse.
— Use the BUY / SELL pill's grade (e.g. ★★★★ 7.8/10) as a confidence read — higher grades reflect stronger displacement, volume and candle body.
— The TARGET ZONE and RISK ZONE boxes frame reward against risk before you commit. Entry, SL, TP1 and TP2 are all labelled with their R multiples.
— Grey zones are spent — they have already been mitigated and are kept only as context for prior structure.
— Combine with your own higher-timeframe bias; order blocks aligned with trend tend to be the cleaner reactions.
▎ KEY SETTINGS
— Engine: ATR length, structure pivot width, displacement break multiple, OB candle search depth, and bull/bear toggles.
— Filters: volume expansion on/off with baseline length and multiplier, minimum grade required to signal, and confirm-on-close to avoid intrabar repaint.
— Zones: show zones, max zones kept (4-6 recommended), extension length, fill transparency, ★ grade labels, keep-mitigated-grey toggle, and bull/bear colours.
— Signals & Risk: show BUY/SELL pills, draw TP/SL zone, stop buffer (× ATR), TP1 and TP2 R multiples, projection length, and max trade sets kept.
— Extras: optional zone-reader candle tinting and an optional VWAP + σ band.
▎ DASHBOARD
A compact panel (five positions, three text sizes) reports: current Bias , count of live Bullish and Bearish OBs, the Nearest zone level and its distance in %, the Strongest zone's grade and tier, the Last Mitigated zone, the Active Signal state, and running Signal and Trade W/L tallies. The W/L count is an illustrative record of how the historical construct resolved — not a performance promise.
▎ ALERTS
— OB Bullish Signal — fires on a bullish order-block retest + reaction.
— OB Bearish Signal — fires on a bearish order-block retest + reaction.
Both include ticker and interval in the message.
▎ NOTES
— Works on all timeframes and all assets ; ATR and volume baselines adapt automatically.
— Confirm On Bar Close evaluates detection, mitigation and signals on closed bars only, so confirmed signals do not repaint.
— Everything is toggleable — zones, grades, pills, trade boxes, candles, VWAP and dashboard — for a chart as clean or as detailed as you like.
— The volume filter self-disables on feeds without volume, so nothing breaks on those symbols.
For research and education only. This is not financial advice. No indicator can predict the future, and past behaviour never guarantees future results. Always do your own analysis and manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
Market Structure Shift [JOAT]═══ MARKET STRUCTURE SHIFT ═══
A complete Smart Money Concepts structure engine that reads the market the way institutional flow moves it — mapping every swing and internal shift, tagging each break as BOS (continuation) or CHoCH (reversal), then layering liquidity, premium/discount context, and a structure-anchored risk plan on top. It turns raw price action into a clean, labelled map of who is in control and where the shift happens.
▎ WHAT IT DOES
MSS tracks confirmed pivots and runs them through a two-layer structure state machine. When price closes (or wicks) beyond a protective swing, it draws the break line, labels it BOS or CHoCH, and updates the live trend state. Around that skeleton it adds equal-high/low liquidity marks, a premium/discount/equilibrium range map, an optional structure-anchored SL and Reward:Risk target zone, session VWAP with deviation bands, and a live dashboard summarising the whole picture.
▎ HOW IT WORKS
• Confirmed pivots — swing highs/lows are detected with a symmetric pivot length (bars each side), so a pivot only prints once fully confirmed. A separate, shorter internal pivot length tracks a faster inner structure layer.
• BOS vs CHoCH logic — each layer holds a trend state (bull / bear / range). A bullish break of the last swing high while the state is already bullish is a BOS (continuation); a bullish break while the state was bearish is a CHoCH (change of character / first reversal). The mirror logic applies to bearish breaks.
• Break confirmation — you choose whether a candle must close beyond the level (cleaner) or whether any wick penetration counts.
• Sequence read — every new pivot is classified HH / LH / HL / LL (or EQ) so you can see the higher-high / lower-low rhythm at a glance.
• Liquidity (EQH/EQL) — two consecutive pivots landing within an ATR-scaled tolerance are marked as Equal Highs or Equal Lows — resting liquidity pools where stops cluster.
• Premium / Discount — the active swing range is split into a Premium (upper) zone, a neutral Equilibrium band around the midpoint, and a Discount (lower) zone, so you always know which half of the range price is trading in.
• Structure-anchored risk — on a fresh signal the stop is placed just beyond the swing that would invalidate the shift (plus an ATR buffer), or by a fixed ATR distance. Risk is floored and capped by ATR, and the target is projected at your Reward:Risk multiple.
• VWAP magnet — session-anchored VWAP with inner and outer standard-deviation bands acts as the fair-value reference the structure tends to rotate around.
• ATR normalisation — label spacing, liquidity tolerance and stop distances all scale with ATR, so the tool behaves consistently across assets and timeframes.
▎ HOW TO USE IT
• Read the trend state first: a CHoCH warns the prevailing structure has broken; a following BOS confirms the new leg. Trade with the higher-conviction swing layer and use internal breaks for earlier, finer entries.
• BUY / SELL labels fire on the events you enable (CHoCH, BOS, or both) from your chosen layer — treat them as a structure trigger, not a blind entry.
• Favour longs from the Discount zone and shorts from the Premium zone; the Equilibrium band is neutral / no-man's-land.
• EQH/EQL marks show where liquidity rests — price often sweeps these before a genuine shift, so use them as targets and as traps to avoid.
• When a signal prints, the RISK ZONE (entry→stop, red) and TARGET ZONE (entry→TP, green) boxes project the plan; the SL and TP lines carry exact price and R labels. The zones extend live, then freeze once TP, SL, or the time-out is reached.
• Use VWAP and its bands as confluence — a shift back through VWAP into the opposite σ band is a common rotation target.
▎ KEY SETTINGS
• Structure Engine — swing pivot length, optional internal layer + its length, close/wick break confirmation, ATR length.
• Signals — signal source (Swing / Internal / both) and whether labels fire on CHoCH, BOS, or both.
• Liquidity & Zones — toggle EQH/EQL, equal-level tolerance, premium/discount zones, equilibrium band width, and the floating price-zone tag.
• Risk Model — stop basis (Structure+Buffer or ATR Multiple), buffer/ATR distance, Reward:Risk multiple, min/max risk floors and caps, projection length, max drawn setups.
• VWAP — show VWAP, inner/outer σ multiples, deviation lookback.
• Visuals — swing/internal break display, pivot markers, zone candle colouring, draw limits, and the blue/violet colour scheme.
▎ DASHBOARD
A compact blue/violet panel reports live: overall Trend , the Last Event (Bull/Bear BOS or CHoCH), the current Swing Sequence (e.g. HH · HL), the Internal structure state, the active Price Zone , running BOS and CHoCH counts, Liquidity (EQH/EQL) count, the current Signal , and the symbol/timeframe. Position and text size are adjustable.
▎ ALERTS
Six alertconditions are provided: Bullish BOS, Bearish BOS, Bullish CHoCH, Bearish CHoCH, BUY Signal, and SELL Signal — each with a ready message carrying ticker and interval.
▎ NOTES
• Works on all timeframes and all assets — everything scales with ATR.
• Pivots are confirmed (they need bars to close each side), so structure marks are non-repainting once printed; the price-zone label and dashboard update live on the last bar as expected.
• Every visual layer has a toggle — turn off what you don't need for a clean chart.
• Signals never fire both directions on the same bar; a conflicting wide-range bar is dropped.
For research and education only. This is not financial advice. No indicator can predict the future, and past behaviour does not guarantee future results. Any labels, zones, or counts describe historical price action only. Always do your own analysis and manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
Reactive Trail System [WillyAlgoTrader]📊 Reactive Trail System (RTS) is an overlay trend-following indicator that combines a momentum-adaptive trailing stop, a dual volatility engine, a 0–100 signal quality score, and a complete trade-management layer (Entry / SL / TP1–TP3 / break-even) — all tracked live on a sectioned dashboard with win-rate statistics.
The core insight: a trailing stop should not have a fixed width. When momentum is strong, price moves cleanly and the trail can hug price to lock in profit. When momentum fades, price gets noisy and the trail must widen to survive the chop. RTS measures momentum every bar and reshapes the trail width automatically — up to 40% tighter in strong moves — so one setting adapts to changing conditions instead of being permanently too tight or too loose.
If you are new to trailing stops: think of the trail as a colored line that follows price from below in an uptrend (green) and from above in a downtrend (red). As long as price stays on the right side of the line, the trend is alive. When price closes through the line, the trend flips — and RTS turns that flip into a fully managed trade idea with a stop-loss and three targets drawn on the chart for you.
Works on all markets (crypto, forex, stocks, indices, commodities) and all timeframes.
🧩 WHY THESE COMPONENTS WORK TOGETHER
A classic supertrend-style trail has three chronic problems. First, its width is fixed — the same multiplier that protects you in chop gives back too much profit in a strong trend. Second, a raw trail flip says nothing about signal quality — a flip in dead, low-volume conditions looks identical to a flip with real participation. Third, a flip is not a trade — you still have to decide where the stop goes, where the targets go, and when to move to break-even.
RTS solves all three with one integrated pipeline:
Baseline MA (6 engines) → Dual volatility measure (ATR + StDev) → RSI momentum engine → Adaptive trail width → Ratcheting trail state machine → HTF bias + volume filters → 0–100 signal score → Wick-anchored SL + TP1/TP2/TP3 → Break-even automation → Trade outcome statistics
The baseline MA defines the anchor the trail hangs from. The volatility engine defines the raw distance. The RSI momentum engine then compresses that distance when momentum is strong — this is what makes the trail "reactive" rather than static. The ratcheting state machine guarantees the trail only ever tightens in the trade's favor (it never backs away from price). The HTF and volume filters decide whether a flip is allowed to become a trade. The scoring engine grades every entry so you can tell an A-setup from a C-setup at a glance. The risk engine converts the signal into concrete levels anchored to real market structure (the signal bar's wick), and the trade engine tracks every touch, break-even move, stop-out and reversal — feeding honest statistics back to the dashboard.
Remove any link and the chain breaks: without momentum adaptation the trail is just another supertrend; without filters every flip fires; without the wick-anchored stop the levels ignore structure; without outcome tracking you never learn how the system actually behaves on your market.
🔍 WHAT MAKES IT ORIGINAL
1️⃣ Momentum-adaptive trail width — the trail breathes with the market.
Instead of a fixed multiplier, RTS computes a momentum distance from the smoothed RSI and uses it to compress the trail:
— momDist = min(|RSI_smoothed − 50| / 50, 1.0) — 0 means dead-center momentum, 1 means extreme
— effectiveMultiplier = TrailMultiplier × (1 − Adaptivity × momDist × 0.4)
— trailOffset = volatility × effectiveMultiplier
With default Trail Multiplier 2.0 and Adaptivity 1.0, the trail runs at full width in neutral conditions and tightens by up to 40% when RSI pushes toward extremes. Set Adaptivity to 0 and you get a classic fixed-width trail; the default 1.0 gives maximum adaptation. RSI length 13 with EMA smoothing 3 keeps the width changes calm instead of jittery.
Why this matters: strong momentum = clean price movement = you can afford a tight trail that protects open profit. Weak momentum = noise = the trail widens automatically so you don't get shaken out.
2️⃣ Dual volatility engine — ATR, StDev, or a stabilized Hybrid.
Trail distance can be measured three ways (Volatility Length default 13):
— ATR: classic bar-range volatility
— StDev: close-to-close dispersion
— Hybrid (default): (ATR + StDev) / 2
ATR reacts to wicks and gaps; StDev reacts to closing dispersion. Averaging them dampens the weakness of each — a single wild wick inflates ATR but barely moves StDev, so the Hybrid stays stable where a pure-ATR trail would suddenly balloon.
3️⃣ Six baseline engines including KAMA and T3 — with a volume-safety fallback.
The trail anchors to a baseline MA selectable from HMA, ALMA (default, length 21), KAMA, T3, VWMA and EMA. KAMA and T3 are computed from their full formulas internally (Kaufman efficiency-ratio smoothing constant sc = (ER × (fast − slow) + slow)², and Tillson's six-stage EMA cascade with a = 0.7). If you pick VWMA on an instrument whose data feed reports no volume (common on some forex feeds), RTS silently falls back to EMA instead of plotting garbage.
4️⃣ Ratcheting trail state machine — the stop never retreats.
In a bull regime the trail is trail = max(previous trail, baseline − offset): it can only rise. In a bear regime it can only fall. A flip requires a full bar close beyond the trail — intrabar wicks through the line do not flip the trend. This one-way ratchet is what makes the line usable as an actual trailing stop rather than a wavy band.
5️⃣ Non-repainting HTF bias filter.
Optional filter: longs only when the higher timeframe (default 240 = 4H) closes above its 50 EMA, shorts only below. The HTF request uses the last closed HTF bar (index with lookahead), so the bias never changes retroactively — what you see in a live chart is what a backtest would have seen.
6️⃣ Signal quality score 0–100 — every entry is graded, not just fired.
Each entry gets a transparent confluence score:
— Momentum component (0–40): min(momDist / 0.6, 1) × 40
— Volume component (0–30): participation vs the 20-bar volume SMA, clamped; fixed 15 when the feed has no volume
— HTF alignment (10 or 30): 30 when the higher timeframe agrees with the trade direction, 10 when it doesn't
The score is shown in the BUY/SELL label tooltip, in the dashboard "Last signal" row, and in every entry alert. A 90-score long (strong momentum, heavy volume, HTF agrees) and a 45-score long are both valid flips — but you instantly know which one deserves full size.
7️⃣ Wick-anchored stop-loss — structure-aware risk, not a blind ATR offset.
Default SL mode anchors the stop to the signal bar's actual wick:
— Long SL = min(low − 0.25 × ATR, close − 0.5 × ATR)
— Short SL = max(high + 0.25 × ATR, close + 0.5 × ATR)
The 0.25 × ATR buffer sits the stop just beyond the wick (where stop-hunts reach), and the 0.5 × ATR minimum distance prevents absurdly tight stops on small-bodied signal bars. A classic fixed ATR mode (SL = entry ± multiplier × ATR, ATR length 14) is available too. Targets are pure R-multiples of the actual risk: TP = entry ± risk × multiplier.
Four one-click risk presets: Conservative (SL 2.5×ATR, TP 1R/2R/4R), Balanced (default: 1.5×ATR, 1R/2R/3R), Aggressive (1.0×ATR, 1.5R/2.5R/4R), Scalping (0.8×ATR, 0.8R/1.5R/2R), plus a fully manual Custom preset with input validation (TP1 < TP2 < TP3 enforced).
8️⃣ Full trade lifecycle engine with honest intrabar rules.
RTS doesn't just draw levels — it tracks the trade like a journal:
— Hits are checked only on confirmed bars, and never on the entry bar itself (entry-bar guard)
— TP-priority model: if a bar touches both a TP and the SL, the TP touch registers first (this optimistic assumption is disclosed right in the dashboard tooltip)
— Break-even automation: once TP1 is touched, the stop moves to entry; a BE moved this bar cannot stop you out on the same bar
— Opposite confirmed signal reverses the position (closes the old trade, opens the new one)
— Win definition is fixed and transparent: a trade counts as a WIN once TP1 has been touched (TP3 close, BE stop-out after TP1, or reversal after TP1); closed before TP1 = loss
9️⃣ Persistent trade visualization.
Entry (subtle dotted), SL (solid, prominent) and TP1/TP2/TP3 (dashed) lines extend with the live trade. When a TP is touched, its line turns solid teal with a ✓ on the label. When break-even activates, the original SL line dims to a record and the entry label is annotated "→ SL (BE)". After the trade closes, the drawing persists as a record until the next entry replaces it — you can scroll back and see exactly how each trade resolved.
🔟 Dashboard 2.0 with period-filtered statistics.
A sectioned panel (Market / Trade / Stats — each toggleable, position and font size configurable):
— Market: trend direction, trend age in bars, HTF bias, smoothed RSI, last signal with score and bars-ago
— Trade: entry, SL (with "BE @" marker), TP1–TP3 with ✓ checkmarks, R:R at TP1, SL distance in % — collapses to one row when flat
— Stats: closed trades, wins, losses, win rate with a ▰▱ gauge, and a "Form" strip of the last 10 results
The win-rate window is selectable: last 24 Hours, last 30 Days, or All-Time — computed from timestamped trade closures kept in a rolling 31-day buffer. Statistics reset on chart reload, and this is disclosed directly in the dashboard tooltips.
📖 HOW IT WORKS — CALCULATION FLOW
Step 1 — Baseline: the selected MA engine (ALMA 21 by default) is computed as the trail anchor.
Step 2 — Volatility: ATR and StDev over 13 bars are combined per the selected engine into one volatility measure.
Step 3 — Momentum: RSI(13) is EMA-smoothed(3); its distance from 50 (normalized 0–1) compresses the trail multiplier by up to 40%.
Step 4 — Trail update: the ratcheting state machine raises the trail in bull regimes / lowers it in bear regimes; a confirmed close through the trail flips the regime.
Step 5 — Filtering: the flip becomes an entry signal only if it passes the optional HTF bias and volume-confirmation filters, on a confirmed bar, after the warm-up period.
Step 6 — Scoring: the entry is graded 0–100 from momentum, volume participation and HTF alignment.
Step 7 — Risk placement: SL is anchored to the signal bar's wick (or fixed ATR), TP1–TP3 are projected as R-multiples of the actual risk per the active preset.
Step 8 — Trade tracking: every confirmed bar is checked for TP touches, break-even activation, stop-out or reversal; outcomes update the win/loss statistics and the Form strip.
📖 HOW TO USE
🎯 Quick start:
1. Add the indicator to your chart. Defaults (ALMA 21, Hybrid volatility, Balanced preset) are ready to use.
2. Wait for a ▲ BUY or ▼ SELL label — hover it to see the score, RSI, SL and TP1.
3. Check the dashboard: score of the last signal, HTF bias, and current R:R.
4. Prefer high-score signals (70+) where the HTF bias agrees with the trade direction.
5. Manage by the drawn levels: partial at TP1 (stop moves to break-even automatically), remainder toward TP2/TP3 or until the trail flips.
👁️ Reading the chart:
— 🟢 Green trail line below price = bull regime; it can only rise
— 🔴 Red trail line above price = bear regime; it can only fall
— ▲ BUY / ▼ SELL labels = filtered, confirmed entries (tooltip shows score and levels)
— Dotted line = entry reference · solid red = stop-loss · dashed green = TP1/TP2/TP3
— Teal solid TP line with ✓ = target reached · dimmed SL + "→ SL (BE)" = stop moved to entry
— Optional: soft trend fill between trail and baseline, and regime-colored candles
📊 Dashboard fields:
— Trend / Age: current regime and bars since the last flip
— HTF Bias: higher-timeframe direction (Off when the filter is disabled)
— RSI: the smoothed momentum value driving trail width
— Last signal: direction · score (bars ago)
— Entry / SL / TP1–TP3 / R:R / SL Dist: full live trade card
— Trades / Wins / Losses / Win rate: statistics for the selected period (24H / 30D / All-Time)
— Form: last 10 results, ▰ = win, ▱ = loss, newest on the right
🔧 Tuning guide:
— Too many flips / whipsaws: raise Trail Multiplier toward 2.5–3.0, raise Baseline Length toward 34–55, or enable the HTF Bias Filter
— Exits feel too late: lower Trail Multiplier toward 1.8, or keep Adaptivity at 1.0 so strong momentum tightens the trail
— Trail width feels jumpy: lower Momentum Adaptivity to 0.4–0.6 or raise Momentum Smoothing to 5–8
— Too few signals: disable the volume filter, or shorten Baseline Length toward 13–21
— Stops too tight on your market: switch the preset to Conservative, or use ATR mode with a higher SL multiplier
— Scalping lower timeframes: Scalping preset + Volatility Length 10 + consider HMA baseline
⚙️ KEY SETTINGS
⚙️ Main:
— Baseline MA Type (default ALMA): trail anchor engine — HMA / ALMA / KAMA / T3 / VWMA / EMA
— Baseline Length (default 21): higher = smoother, fewer flips
— Momentum (RSI) Length (default 13) and Smoothing (default 3): the adaptive-width driver
— Volatility Engine (default Hybrid) and Length (default 13)
— Trail Multiplier (default 2.0): base trail distance in volatility units
— Momentum Adaptivity (default 1.0): 0 = fixed width, 1 = up to 40% tightening
🔍 Filters:
— HTF Bias Filter (default off) + Higher Timeframe (default 240): trade only with the bigger trend
— Volume Confirmation (default off) + Threshold (default 1.2 × SMA20): require real participation; auto-bypassed on no-volume feeds
🛡️ Risk Management:
— Risk Preset (default Balanced): Conservative / Balanced / Aggressive / Scalping / Custom
— SL Mode (default Wick-Anchored): structure-based stop or fixed ATR
— ATR Length (default 14), SL / TP1 / TP2 / TP3 multipliers (Custom preset)
— Break-Even After TP1 (default on)
— SL/TP lines, labels, % distance and per-line styles are all configurable
🎨 Visual:
— Theme Auto / Dark / Light (auto-detects chart background), trail / baseline / fill / labels / candle-coloring toggles, font sizes, bull & bear colors
📊 Dashboard:
— Show/hide the panel and each section, position (4 corners), font size, Win Rate Period (24 Hours / 30 Days / All-Time)
🔔 ALERTS
— 🟢 LONG / 🔴 SHORT — entry with price, SL, TP1–TP3, R:R and score; plain text or JSON webhook payload for bot integration
— 🎯 TP1 HIT / 🎯🎯 TP2 HIT — target touches
— 🏆 TP3 HIT — final target, trade closed
— 🛑 SL HIT / 🛡️ BE STOP-OUT — stop-outs with entry and stop price
— 🛡️ BREAK-EVEN — stop moved to entry after TP1
— 🔄 REVERSAL — opposite signal closed the trade and opened the other direction
— ▲ / ▼ FLIP (optional, informational) — trail flipped but the entry was blocked by filters
All alerts fire once per confirmed bar close. Set up a single alert with "Any alert() function call" and toggle the categories you want in the settings.
⚠️ IMPORTANT NOTES
— 🚫 No repainting. Signals require barstate.isconfirmed; a flip needs a full bar close through the trail; the HTF filter reads only the last closed higher-timeframe bar; all alerts use bar-close frequency. What you see on historical bars is what the live chart produced.
— 📐 Intrabar assumption disclosed. When a single bar touches both a TP and the SL, the TP registers first (optimistic model). This is stated in the dashboard tooltip so the statistics are interpreted correctly.
— 📐 Statistics are session-based. Win/loss counts and the Form strip are computed from the loaded chart history and reset on chart reload. Past performance does not guarantee future results.
— ⚖️ Scope. RTS is a trend-following system — like any trail-based approach it performs best in trending conditions and will flip more often in tight ranges. Use the HTF and volume filters and the score to skip low-quality environments.
— 🛠️ This is an analysis tool, not an automated trading bot. It identifies trend regimes, grades entries, and draws structured risk levels — trade decisions remain yours.
— 🌐 Works on all markets and timeframes. Instruments without volume data are handled automatically (VWMA falls back to EMA, the volume filter bypasses, scoring uses a neutral volume component).
The indicator is completely free. Indicator
Liquidity Sweep Reversal [JOAT]═══ LIQUIDITY SWEEP REVERSAL ═══
Liquidity Sweep Reversal hunts the stop-run. Price wicks beyond a prior swing high or low to grab resting liquidity, then snaps back inside — and that reclaim is where the reversal often begins. This tool tracks those levels, validates the sweep, and frames a complete trade with stop, targets and live outcome stats. 🎯
▎ WHAT IT DOES
It maps recent swing highs and swing lows as liquidity pools, watches for a candle to pierce one and then close back on the correct side (the reclaim ), and prints a clean BUY or SELL label. Every valid signal is turned into a structured trade: an ATR-based stop beyond the swept wick and three R-multiple targets, all tracked to resolution on a self-scoring dashboard.
▎ HOW IT WORKS
• Liquidity mapping — Confirmed pivot highs and lows (lookback set by Swing Pivot Lookback ) are stored as active levels per side, capped in count and aged out after a maximum bar age so only relevant pools remain.
• Sweep + reclaim — A bullish setup needs the bar to wick below a tracked swing low, then close back above it (sell-side liquidity grabbed). A bearish setup wicks above a swing high, then closes back below it. The reclaim can complete on the sweep bar or within the Reclaim Window you allow.
• Wick-depth gate — The penetration beyond the level is measured in ATR. Too shallow (noise) or too deep beyond the Max Wick cap (a genuine breakout) is rejected, so only clean stop-hunts qualify.
• Confluence filters — Optional volume-spike confirmation, HTF trend alignment (BUY only above a higher-timeframe EMA, SELL only below), directional restriction, dual-side sweep blocking on wide bars, and a signal cooldown all thin the feed.
• Trade construction — Entry is the reclaim close. The stop sits beyond the swept wick by an ATR buffer, then is clamped between a min-risk floor and max-risk cap. That risk (1R) projects TP1 / TP2 / TP3 at your chosen R multiples.
• Outcome engine — Each trade is followed bar by bar. Same-bar stop-vs-target conflicts resolve by your chosen priority, and trades that never reach TP3 or stop are flattened at a bar timeout — every result feeds the stats.
▎ HOW TO USE IT
• A BUY pill under price marks a bullish reclaim; a SELL pill above price marks a bearish one. The dotted level line and SSL / BSL SWEEP tag show exactly which liquidity pool was raided.
• The green target zone spans entry to TP3; the red risk zone spans entry to stop. Lines and left-side labels print entry, SL and each TP with its R value.
• On close, a result label reports the outcome — TP3 , a protected partial TP , SL , or a TIME exit — with the realised R.
• Treat signals as a structured framework, not a black box: strongest reversals tend to appear at obvious swing extremes, with HTF alignment and a volume spike behind them.
▎ KEY SETTINGS
• Engine — pivot lookback, reclaim window, ATR length, tracked levels per side, level age, and signal direction (Both / Long / Short).
• Filters — min/max wick depth, volume-spike confirmation, HTF timeframe + EMA, dual-side blocking, and cooldown bars.
• Trade Model — stop buffer, min/max risk bounds, TP1/TP2/TP3 in R, same-bar priority, trade timeout, and drawn-trade history depth.
• Visuals — toggles for markers, sweep lines, zones, level labels, result labels, optional signal-candle tint, and a session VWAP ± σ band .
▎ DASHBOARD
A compact panel reports live state — Status (Waiting / Armed / Active), current active trade side, last sweep and its level — alongside performance: sweeps detected, signals taken, closed count, win rate , profit factor , average R , bull vs bear win%, current and max win/loss streak , and an optional TP1/TP2/TP3 vs SL/Timeout breakdown. Position and text size are configurable.
▎ ALERTS
• Bullish Sweep (BUY) and Bearish Sweep (SELL) on confirmed entries.
• TP3 Hit , Partial TP Hit (protected exit), and SL Hit on trade resolution.
▎ NOTES
• Works on all timeframes and all assets — instruments without volume simply pass the volume filter.
• Signals confirm on the reclaim close , so a printed BUY/SELL marker does not move once the bar closes.
• Every visual has a toggle — turn off zones, lines, labels or the dashboard for a minimalist chart.
• The on-chart statistics summarise historical signals only and are illustrative, not a forecast.
For research and education only. This is not financial advice. No indicator can predict the future, and past behaviour does not guarantee future results. Always manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
Supertrend + Apex HUD Master Pro - Farthaze### Overview
**Supertrend + Apex HUD Master Pro** is an all-in-one trading dashboard designed to combine clean price action trailing stops with a high-density, real-time Heads-Up Display (HUD).
Instead of cluttering your chart with dozens of individual indicators, this script consolidates market trend, momentum, intraday volume dynamics, key daily pivot levels, and target projections into a single, compact interface.
---
### Key Features
#### 1. Adaptive Supertrend Engine
* **Trailing Stop Overlay:** Uses Average True Range (ATR) to trail stops dynamically based on volatility.
* **Visual Trend Fill:** Highlights the active trend direction with transparent, non-intrusive color shading between price and the Supertrend line.
* **Signal Labels:** Displays clean `BUY` and `SELL` tags on valid trend flip transitions.
#### 2. Apex HUD Master Table
A real-time data table pinned to your chart providing quick market analysis:
* **Trend Bias & Momentum:** Instant visual status of trend direction alongside 14-period RSI momentum.
* **Volume Analysis (RVOL):** Tracks current bar volume relative to a 20-period SMA to spot unusual volume spikes instantly.
* **Shares Traded & Split Volume:** Calculates total session volume alongside intra-bar estimated **Buy Volume (Green)** and **Sell Volume (Red)** to gauge institutional buying vs. selling pressure.
* **Key Levels (PDH/PDL & TDH/TDL):** Consolidated tracking of Previous Day High/Low and Today's High/Low for quick support/resistance reference.
* **Dynamic Take-Profit Targets (TP1 / TP2 / TP3):** Calculates volatility-adjusted target levels using ATR multipliers to help plan trade exits.
* **Risk-to-Reward Ratio:** Displays a real-time Risk:Reward ratio based on the distance between current price, the Supertrend stop-loss, and target levels.
#### 3. Volatility Spike Monitor
* A standalone auxiliary table tracking recent high-volatility expansion bars (bars exceeding your defined ATR spike threshold).
* Keeps track of the last bullish and bearish volatility spikes along with their percentage move size and breakout prices.
---
### How to Use
1. **Identify Trend Bias:** Check the Supertrend overlay and the HUD's **Trend Bias** indicator to align with the primary direction.
2. **Confirm Volume & Momentum:** Ensure RSI momentum aligns with your bias and check if RVOL indicates elevated volume participation.
3. **Gauge Institutional Pressure:** Compare the green **Buy Vol** and red **Sell Vol** numbers in the HUD to confirm who is controlling the intraday order flow.
4. **Manage Trade Exits:** Use the auto-calculated **TP1, TP2, and TP3** target levels alongside the Risk:Reward readout to plan your entries and exits.
---
### Indicator Settings & Customization
* **Supertrend Settings:** Adjust ATR Period and Multiplier to fit scalping, swing trading, or position trading timeframes.
* **Apex HUD Options:** Customize table position (Top Right, Top Left, Bottom Right, Bottom Left) and text scaling size.
* **Session Filter:** Filter shares traded calculation between *All Sessions*, *Regular Hours Only*, *Premarket Only*, or *Postmarket Only*.
* **Volatility Spike Table:** Set custom ATR thresholds to trigger volume/range expansion tracking.
---
*Disclaimer: This indicator is designed for educational and analytical purposes only and does not constitute financial advice. Always practice proper risk management.*
I created this to surpass time to see today highest and lows and volume etc. Hope you like it. Happy trading Indicator
ICT Kill Zone Sniper [JOAT]═══ ICT KILL ZONE SNIPER ⚡ ═══
A session-aware sniper tool that paints every candle by its active kill zone, tracks the liquidity pool each session leaves behind, and fires a single clean BUY or SELL only after price sweeps the prior pool and reverses back inside the current kill zone. Built for traders who wait for the liquidity grab, not the breakout.
▎ WHAT IT DOES
It splits the trading day into four classic kill zones — Asia , London , NY-AM and NY-PM — colors the candles inside each one, and records the high and low that every finished session builds. Those prior highs/lows become the liquidity pools hunted in the next window. When the current kill zone reaches into one of those pools and then closes back through it, the tool marks the sweep and projects a full trade: entry, ATR stop, and an R-based target zone.
▎ HOW IT WORKS
• Kill-zone clock — each session window is evaluated in a chosen wall-clock timezone (New York by default). Membership is na-guarded, so it behaves correctly on any intraday timeframe and simply idles on higher timeframes.
• Session state machine — while a kill zone is live, the tool expands that session's running high and low. When the session ends, that high/low is frozen as the prior liquidity pool and drawn as dashed projection lines carried into the next window.
• Sweep + reversal detection — a high sweep needs price to trade above the prior pool high yet close back below it; a low sweep needs a dip below the prior pool low with a close back above. A Min Sweep Depth (× ATR) filter rejects micro-penetrations caused by spread and tick noise.
• Confirmation — sweeps can be evaluated on confirmed bar close only, so signals do not repaint intrabar. At most one long and one short can print per kill-zone occurrence when the one-per-side lock is on.
• Optional HTF bias — a higher-timeframe EMA (requested with lookahead off) can gate direction: longs only above it, shorts only below it.
• Trade projection — on a valid signal the stop is placed beyond the swept extreme plus an ATR buffer, risk is measured from entry to stop, and the target is set at your chosen R multiple. Reward and risk are drawn as tinted zone boxes with entry/SL/TP lines and level labels.
• Optional VWAP — a session-anchored VWAP with a ±σ band is available as extra context.
▎ HOW TO USE IT
• Wait for a BUY or SELL pill to print inside a colored kill zone — it means the prior pool was swept and price reversed back through it.
• The green zone box is the reward leg toward the R-target; the red zone box is the risk leg to the stop. The label pill shows the session and the R multiple.
• Use the dashed prior high/low lines as the liquidity being hunted this session — signals cluster around them.
• Treat the HTF bias as a directional filter and the sweep tags as confirmation that liquidity was actually taken before you commit.
• Combine with your own structure read; the tool marks the setup, you manage the trade.
▎ KEY SETTINGS
• Kill Zones — timezone plus editable session windows for Asia, London, NY-AM and NY-PM.
• Signal Engine — ATR length, confirm-on-close, one-signal-per-side lock, and minimum sweep depth.
• HTF Bias — toggle, higher timeframe, and EMA length.
• Trade Model — stop buffer beyond the sweep, risk/reward target in R, projection length, and how many past signals to keep.
• Visuals — candle tinting and transparency, session boxes, pools, sweep tags, signal labels, SL/TP lines and zone boxes, VWAP bands, and label size.
• Dashboard — show/hide, position, and text size.
▎ DASHBOARD
A cyberpunk chrome-gradient panel reporting the active session , current session high/low , a countdown to the next kill zone , the HTF bias state, the last liquidity grab side, the active signal with bars-since, the last entry , its stop / target , the current ATR , and a running long / short signal tally .
▎ ALERTS
• KZ Sniper Long — prior-pool low sweep plus bullish reversal inside a kill zone.
• KZ Sniper Short — prior-pool high sweep plus bearish reversal inside a kill zone.
▎ NOTES
• Works across assets; the session logic is intended for intraday timeframes and idles on higher ones.
• Confirm-on-close keeps signals non-repainting; the HTF EMA is requested with lookahead off.
• Nearly every visual has a toggle, so you can strip it down to just the candles and signals for a clean chart.
• Any on-chart tallies reflect historical signals only.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results. Always manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
FVG Sniper [JOAT]═══ FVG SNIPER ═══
A complete Fair Value Gap engine that finds price imbalances, grades their quality, tracks how they fill, mitigate and invert, and then paints a full trade blueprint the moment a clean setup fires. One gap is spotlighted as the strongest, and every signal arrives with entry, three targets, a stop, and colored risk/reward zones — no arrows, no clutter.
▎ WHAT IT DOES
FVG Sniper detects three-candle fair value gaps (imbalances), scores each one from 0–10, and monitors its life cycle: how much of the gap has been filled, whether it has been mitigated (wick-tapped through), and whether price has closed fully through it to flip its role into an Inverted FVG (IFVG) . When a graded gap produces a rejection or an IFVG flip that agrees with the higher-timeframe bias, it draws a structured trade plan and reports the whole picture in a dashboard.
▎ HOW IT WORKS
• Gap detection — a bullish gap forms when the current low sits above the high from two bars back; a bearish gap forms when the current high sits below the low from two bars back.
• Quality filters — each candidate must clear a minimum gap size (as a multiple of ATR ) and a minimum displacement body ratio on the impulse candle, so tiny or weak imbalances are ignored.
• Grade (0–10) — blends gap size, the displacement range of the middle candle, and relative volume into a single score. Only gaps at or above your minimum grade may fire a signal.
• Fill & mitigation — the engine tracks the running extreme inside each gap to compute a live fill percentage, and marks a gap mitigated once a wick fully traverses it.
• Inversion (IFVG) — when price closes fully through a gap, its role flips; the box restyles to a dashed amber accent and the flip is logged.
• Signals — two sources you can mix or isolate: Rejection (price retraces into a live gap and reacts back out with a directional close) and IFVG Flip (a mitigated gap is closed through, confirming continuation).
• HTF bias filter — an optional higher-timeframe EMA bias must agree with the signal direction before it is allowed.
• Trade model — on a fresh signal it sets entry at close, a stop either gap-protected (just beyond the triggering gap boundary) or ATR-based, with risk clamped between a floor and a cap. Targets TP1/TP2/TP3 are placed at your chosen R multiples.
• Non-repainting — all detection, scoring and signals evaluate on confirmed (closed) bars only, and the HTF request uses no lookahead.
▎ HOW TO USE IT
• Trade in the direction of the BUY / SELL pill. The stars and score on the pill show the grade of the gap that triggered it.
• The entry line (chrome), dashed stop , and TP1/TP2/TP3 lines map the plan directly on the chart; level labels on the right print exact prices and R values.
• The green zone is the target/reward area from entry to TP3; the red zone is the risk area between entry and stop — a fast visual read of the trade's R:R.
• A single ★ spotlight tags only the strongest active gap, so you always know the best imbalance in view.
• Use live gaps as decision zones: watch the fill % of the nearest gap, and treat an IFVG flip as a shift in short-term control.
• When a trade closes, a result label prints the outcome (TP hit, stop, or exit at R) so completed setups stay readable.
• Combine with your own structure, session and news context — the gap engine locates the where , you confirm the when .
▎ KEY SETTINGS
• Engine — enable bullish/bearish detection, choose the signal source (Rejection, IFVG Flip, or both), and cap how many gaps stay visible plus their lifetime and box extension.
• Filters — ATR length, minimum gap size, minimum displacement body ratio, minimum grade, the HTF bias filter (timeframe + EMA length), and whether a directional rejection close is required.
• Trade Model — stop basis (Gap-Protected vs ATR), stop buffer/distance, risk floor and cap, TP1–TP3 in R, max trade duration, zone projection, and how many completed trades to keep.
• Visuals — toggle gap boxes, midline, hide-mitigated declutter, grade spotlight, IFVG styling, signal pills, zone boxes, lines, level and result labels, zone-reader candle coloring, optional VWAP + σ bands, and all colors/transparency/sizes.
• Dashboard — show/hide, position, text size, and dark or light panel.
▎ DASHBOARD
The on-chart panel reports: HTF bias, count of active bullish and bearish gaps, the nearest gap price and its fill %, the strongest gap's star grade, the last IFVG flip (with bar age), the active signal, any live trade with its entry, and running totals of bullish / bearish / inverted gaps detected.
▎ ALERTS
• BUY signal
• SELL signal
• Bullish IFVG Flip (inversion up)
• Bearish IFVG Flip (inversion down)
▎ NOTES
• Works on all timeframes and all assets — indices, forex, crypto, stocks, futures.
• Signals and drawings are computed on closed bars, so they do not repaint after the bar confirms.
• Object caps and hide-mitigated / declutter toggles keep the chart clean even on long histories.
• Any on-chart result labels reflect historical signals only and are illustrative, not a performance guarantee.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results — always manage your own risk.
Made with passion by JackOfAllTrades ⚡
Indicator
Adaptive Trend Cloud [JOAT]═══ ADAPTIVE TREND CLOUD ═══
A volatility-adaptive ATR SuperTrend that breathes with the market. Instead of a fixed multiplier, the band width auto-scales to the live volatility regime, then paints a filled cloud to a signal EMA, colors your candles by trend strength, and drops ATR-anchored SL/TP zones on every confirmed flip. One clean, self-contained trend engine with a cyberpunk chrome readout.
▎ WHAT IT DOES
It tracks the prevailing trend with a SuperTrend line whose ATR multiplier adapts to how volatile price currently is — wider in turbulence to avoid whipsaw, tighter in calm to catch turns earlier. The space between that line and a signal EMA is filled as a Trend Cloud , candles are shaded by how far price sits from the line, and momentum-confirmed BUY / SELL labels fire only when trend, regime, and momentum agree.
▎ HOW IT WORKS
• Adaptive multiplier — current ATR is percentile-ranked against its recent window to place volatility on a 0–1 scale. The base multiplier is then scaled up or down within an adjustable range, so high volatility widens the bands and low volatility narrows them.
• SuperTrend core — upper and lower bands are built from your chosen price basis (hl2, close, or ohlc4) ± adaptive-multiplier × ATR, and direction flips when price closes through the opposite band.
• Trend Cloud — a fill is drawn between the SuperTrend line and an EMA (which doubles as the regime filter), tinted green in uptrends and red in downtrends.
• Trend strength — measured as the distance from close to the SuperTrend line in ATR units, clamped and normalized so roughly 3 ATR reads as fully saturated. This drives the candle and cloud gradient from weak to strong.
• Momentum confluence — an optional filter requiring RSI above/below its midline, or MACD histogram sign, to agree with the flip direction.
• Signal logic — a BUY needs a bullish flip plus price above the EMA plus momentum agreement; a SELL needs the mirror. All three conditions must line up.
• SL/TP zones — on each signal, stop distance is ATR × your SL multiple, TP1 sits at 1R, and TP2 at your risk:reward ratio; boxes, lines, and labels live-extend forward while the trade runs, then freeze on the next flip.
▎ HOW TO USE IT
• Trade with the cloud: green cloud and green-shaded candles favor longs, red favors shorts.
• Treat BUY / SELL labels as your trigger — they only appear on a confirmed flip that also passes the EMA and momentum filters.
• Use the RISK ZONE (red) and TARGET ZONE (green) boxes to frame a trade at a glance: entry line, dashed SL, dotted TP1 at 1R, and TP2 at your chosen R multiple.
• Read candle brightness as conviction — deeply saturated candles mean price is stretched from the line and the trend is strong; pale candles signal a weakening or fresh move.
• Optionally enable the VWAP + σ bands for an intraday mean-reference and to gauge stretch from the session average.
• Combine with your own structure, higher-timeframe bias, and levels — this is context, not a standalone system.
▎ KEY SETTINGS
• Engine — ATR length, base multiplier, adaptive range (0 = fixed multiplier), volatility rank window, and band source.
• Filters — signal/trend EMA length, momentum toggle, RSI vs MACD, RSI length and midline.
• Risk — show zones on/off, SL in ATR units, risk:reward ratio, zone projection length, and how many past zones to keep.
• Visuals — cloud toggle and transparency, gradient candles, line/EMA/label toggles, VWAP bands and σ, label size, and the four bull/bear gradient colors.
• Dashboard — show/hide, panel position, and text size.
▎ DASHBOARD
A compact chrome panel reports live: current Direction , the Adaptive Multiplier in effect, the Volatility Regime (Low / Normal / High with a percentile), Trend Strength %, Bars In Trend , Distance To Flip in ATR, the Active Signal state, the current ATR value, and whether Momentum is aligned or divergent.
▎ ALERTS
• Bull Flip — SuperTrend turns up with price above EMA and momentum aligned.
• Bear Flip — SuperTrend turns down with price below EMA and momentum aligned.
• Any Flip — either signal fires.
Each includes ticker and interval placeholders.
▎ NOTES
• Works on any market and any timeframe — the adaptive engine re-ranks volatility to whatever chart you load.
• Signals confirm on the close of the flip bar and do not repaint after that bar closes.
• Fully self-contained with no external libraries; every visual layer (cloud, candles, zones, VWAP, dashboard) has its own toggle so you can keep the chart as clean as you like.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results. Always do your own analysis and manage your own risk.
Made with passion by JackOfAllTrades ⚡ Indicator
Adaptive Regression Breakout Map | GainzAlgoThe Adaptive Regression Breakout Map (ARBM) is an advanced volatility and trend-tracking system designed to identify periods of extreme market compression and automatically map out high-probability breakout trades.
Rather than relying on traditional lagging indicators, ARBM utilizes a continuous statistical baseline to measure market "squeezes." Once a breakout is confirmed, the indicator shifts from analysis into execution mode, drawing a dynamic visual map on your chart that outlines precise Entry, Stop Loss, and Take Profit (TP1, TP2, TP3) levels, complete with automated trailing stop logic and a live performance dashboard.
How It Works
At its core, the ARBM operates on a dual-engine architecture:
Statistical Compression (The Squeeze): The script calculates a rolling linear regression baseline and wraps it in standard deviation bands. It continuously measures the width of this channel and compares it to a historical lookback period. When the bandwidth drops into a historically low percentile, the bands change color, signaling that the market is in a "squeeze" and building energy for a move.
Auto-Trendlines: Alongside the statistical bands, the script plots dynamic, auto-trendlines across recent pivot highs (cyan) and lows (magenta). These holographic lines track geometric compression and leave a visual history on the chart.
The Breakout Trigger: A signal is generated when the price violently escapes either the statistical standard deviation bands or the geometric auto-trendlines while the market is in a confirmed contraction state.
Dynamic Trade Mapping: Upon a breakout, the script calculates targets based on the volatility (bandwidth) at the time of the breakout. It plots the trade directly on your chart and actively trails the stop loss as targets are hit.
The Settings and Selections
The indicator is highly customizable, divided into four primary control groups:
Regression Model:
Regression Length: The lookback period for the linear regression baseline.
Deviation Multiplier: The width of the statistical bands (similar to Bollinger Bands).
Contraction Metrics:
Lookback Period: How far back the script looks to determine if the current channel is historically narrow.
Contraction Threshold %: The percentile the bandwidth must drop below to trigger a "squeeze" state.
Target Architecture:
TP1, TP2, TP3 Multipliers: Determines how far away your take profit targets are, dynamically scaled by multiplying the width of the channel at the time of the breakout.
Trendlines Overlay:
Show Holographic Trendlines: Toggle the geometric trendlines on or off.
Pivot Length: Determines how sensitive the script is when identifying the swing highs and lows used to draw the trendlines.
How to Use It
Trading with the ARBM is highly visual and systematic:
Wait for the Squeeze: Watch the regression channel. When the bands turn gray, volatility has compressed, and the market is consolidating.
Wait for the Signal: Look for a "Breakout, Long" or "Breakout, Short" label to appear. This confirms price has broken structure with momentum.
Follow the Map: The script will immediately draw your Entry (Blue), Stop Loss (Red), and three Take Profit targets (Green dashed lines).
Manage the Trade: The indicator handles trade management visually.
When TP1 is hit, the Stop Loss line automatically moves to your Entry price (Breakeven), and a label confirms the trail.
When TP2 is hit, the Stop Loss trails to TP1.
When TP2 is hit, the Stop Loss trails to TP1.
The trade closes entirely if TP3 or the trailing stop is hit. (Note: Hitting TP1 secures a win for the system's tracking, even if the remainder is stopped out at breakeven).
Monitor Performance: A stylized dashboard in the top right corner tracks the total number of signals, the historical Win Rate, and the Trade-by-Trade Sharpe Ratio, allowing you to quickly validate the settings for any given asset or timeframe.
Final Thoughts
The Adaptive Regression Breakout Map removes the guesswork from breakout trading. By combining continuous statistical volatility tracking with futuristic geometric trendlines, it mathematically identifies when a market is ready to move. Furthermore, by drawing the exact risk-to-reward parameters on the chart and tracking its own historical performance, it forces strict risk management and objective trade execution.
Indicator
Reversal Confluence Sniper [JOAT]Reversal Confluence Sniper
Hunts exhaustion reversals by requiring several independent exhaustion signals to appear together, so it fades stretched moves with confirmation rather than hope.
What it is
Fading a trend is dangerous when done on a single cue. This indicator only flags a potential reversal when multiple, independent signs of exhaustion coincide at the same moment — turning a risky counter-trend guess into a confluence-gated setup. It is an original reversal engine, not a lone oscillator flip.
How it works
The engine looks for several exhaustion conditions and requires enough of them to align:
• Momentum extreme — an oscillator reaching and rolling over from an overextended level, showing the push is losing force.
• Volatility stretch — price extended a statistically large distance from a mean or band, marking an unsustainable move.
• Rejection candle — a wick or close that rejects the extreme, showing the aggressive side failed to hold new ground.
• Participation — a volume or effort read that flags climax or fade behaviour rather than steady continuation.
A Buy (bullish reversal) prints when enough downside-exhaustion factors align; a Sell when enough upside-exhaustion factors align. A minimum-gap control prevents repeated prints while a market chops around an extreme.
Trade levels
Each signal draws a red risk box to a stop placed beyond the exhaustion extreme and a green reward box to the third target, with inner dividers and right-edge labels for entry, stop and each take-profit at your R multiples. Placing the stop beyond the extreme respects the idea that if price makes a new extreme, the reversal thesis is wrong.
The dashboard
An adjustable sniper-scope panel shows which exhaustion factors are currently active, a combined conviction reading, the active signal, and a live first-target-before-stop tally from closed bars only, so you can see how much confluence backs each setup.
How to use it
• Works on any asset and timeframe.
• Most effective for timing entries at the end of a stretched move, ideally into a higher-timeframe level or zone.
• Because it fades momentum, pair it with structure or a level tool and keep stops disciplined — reversals that do not confirm should be cut quickly.
Settings
The exhaustion factor lengths and thresholds, the number of factors required to trigger, risk multiple and target R multiples, plus visual and dashboard controls.
Originality and usefulness
The contribution is the confluence gate itself: several independent exhaustion measures that must agree before a counter-trend signal is allowed, with a transparent readout of which factors fired and integrated, non-repainting trade framing. It is designed to make fading safer by demanding evidence, not to promise reversals.
Notes and limitations
• Counter-trend trading is inherently higher risk; strong trends can stay stretched far longer than expected and overrun any reversal signal.
• Requiring more factors reduces false signals but also reduces frequency — this trade-off is yours to set.
• The tally reflects only past bars on the current chart and is not a forecast.
• Educational and analytical tool, not financial advice.
— made with passion by officialjackofalltrades
Indicator
Multi-Timeframe Trend Matrix [JOAT]Multi-Timeframe Trend Matrix
Reads several timeframes with several methods at once and scores their agreement into a single alignment signal — without lookahead.
What it is
Trading a single timeframe blinds you to the larger context; watching many by eye is slow and inconsistent. This indicator evaluates a grid of timeframes and trend methods, turns the whole grid into one alignment score, and signals when top-down agreement forms. It is an original multi-timeframe aggregation tool built to avoid the common pitfalls of higher-timeframe requests.
How it works
• The matrix — a set of higher and lower timeframes is each assessed by several independent trend methods (such as a moving-average relationship, a directional trend measure and a momentum read). Each cell of the grid returns simply bullish or bearish, so the picture is easy to interpret.
• No lookahead — every higher-timeframe value is pulled with lookahead disabled, so the indicator never borrows future data from an unclosed higher-timeframe bar. This is a deliberate, disclosed design choice that keeps the signals honest and non-repainting on historical bars.
• Alignment score — the grid is condensed into one signed score representing how strongly all timeframes and methods agree. Full agreement produces a strong reading; a split grid produces a weak, near-neutral one.
• State-machine signals — a Buy fires when alignment turns sufficiently bullish from a non-bullish state; a Sell is the mirror. Requiring a state change means the matrix will not re-signal the same direction repeatedly — the signals are self-spacing.
Trade levels
Each signal draws a red risk box to the ATR stop and a green reward box to the third target, with inner dividers and right-edge labels for entry, stop and each take-profit at your R multiples.
The dashboard
An adjustable alignment-matrix panel displays every timeframe-by-method cell as bullish or bearish, a bipolar alignment-score headline, the active signal, a conviction estimate, and a live first-target-before-stop tally from closed bars only. The grid shows exactly which timeframes agree and which disagree.
How to use it
• Works on any asset; pick a base timeframe and let the grid supply the higher-timeframe context.
• Favour entries when the grid is broadly aligned; be cautious when it is mixed.
• Use it as a top-down filter alongside your own entry method, or take its aligned signals directly.
Settings
The set of timeframes, the methods and their lengths, the alignment threshold, ATR risk multiple and target R multiples, plus visual and dashboard controls.
Originality and usefulness
The contribution is the aggregation framework: a disciplined, lookahead-free multi-timeframe, multi-method grid condensed into one transparent alignment score with a state-machine trigger. Seeing the full grid — not just a final arrow — is what lets a trader trust or override the signal for themselves.
Notes and limitations
• Higher-timeframe values update only as those bars close, so alignment can shift when a higher-timeframe bar completes — this is expected and prevents lookahead bias.
• Strong alignment can still precede a reversal; agreement is context, not certainty.
• The tally reflects only past bars on the current chart and is not a forecast.
• Educational and analytical tool, not financial advice.
— made with passion by officialjackofalltrades
Indicator
Buy/Sell Signals [WynTrader]Buy/Sell Signals
Hello dear Friend
Here is my Buy/Sell Signals indicator that may help you easily run a Buy/Sell backtest Strategy, seeing, at a glance, performance results.
█ OVERVIEW
This indicator identifies trend changes and generates Buy/Sell signals as accurately as possible. Its strength lies in the results Table, which lets you evaluate signal performance directly on the chart — compared to a simple Buy & Hold strategy — without running a full backtest.
█ CONCEPTS
This Buy/Sell Signals , compared to other tools that detect trend shifts, is simple, easy to use, and demonstrates its efficiency on its own, at a glance.
The Table results allow you to quickly evaluate signal performance, both on their own and compared to a Buy & Hold strategy. The Table calculations are fully s ynchronized with the visible chart (WYSIWYG – What You See Is What You Get). You can also scroll the chart across different date ranges to see how a stock or product performs under various market conditions.
You can adjust the variables to suit your goals. The design is simple, with clear parameters and instant readability of Buy/Sell Signals on the chart and in the Table results, without complex interpretation needed.
A Table shows the effectiveness of the signals on the current visible chart, providing immediate, realistic feedback performance. The Buy & Hold strategy results are also included for comparison with the Buy/Sell swing strategy. The Buy & Hold results start from the first Buy signal to ensure a fair comparison. Changing the parameters instantly updates the Table, giving a quick, immediate performance check.
█ FILTERS (Buy/Sell parameters)
This indicator generates Buy/Sell signals using optional and adjustable filters:
- Bollinger Bands Lookback Trend Filter
- High-Low vs Candle Range Threshold %
- Distance from Fast and Slow MAs Threshold %
Results are displayed in a Table on the chart, based on the currently visible start and end dates.
█ TABLE RESULTS (Buy/Sell signals performance)
The Results Calculation presented in the Table is based on the Current Chart Visible Range . The Table shows the:
- Calculation Results of the Buy and Sell Signals activated on the chart
- Number of Trades (Signals)
- Winning Points
- Win Rate %
The Buy & Hold calculation starts at the first Buy encountered.
█ CAUTION
The Graal Indicator, even with AI, doesn't exist yet — maybe one day, but not now — depending on the chart product, volatility, probabilities, and unpredictable market behaviour. Don't rely on this tool to make trade decision, it's only a tool to, maybe, help assess a change of trend.
Seeing Buy/Sell signals on a chart is appealing, but assessing their performance in a Table makes it even more convincing — and without running a full backtest, you get a clear overview of performance immediately.
█ WYNTRADER
My name is WynTrader. I cumulate 24 years of experience. In 2001, I took an intensive technical analysis course taught by an exceptional friend, Cyril, who taught me everything I know.
After testing thousands of PulseWire indicators over these 24 years, I've found none to be 100% accurate all the time. This Buy/Sell Signals indicator may outperform some others but is still not perfect. So, just be aware, and don't be fooled by this tool.
Enjoy!
WynTrader Indicator
Supply & Demand Order Blocks [JOAT]Supply and Demand Order Blocks
Detects institutional order blocks from displacement, tracks them until mitigated, and signals reactions when price returns to a fresh zone.
What it is
Large participants cannot fill size at a single price, so they leave a footprint: the last opposing candle before an aggressive, imbalanced push. That candle marks the zone where unfilled orders rest and where price often returns to be re-accumulated or re-distributed. This indicator locates those zones objectively, manages their lifecycle, and frames the reaction as a trade. It is an original order-block engine with strict zone management.
How it works
• Displacement — the engine measures each impulsive leg over a short window against an ATR multiple. Only moves that exceed that threshold (optionally requiring a fair-value gap) count as institutional displacement, filtering out ordinary candles.
• Order block — the last opposing candle before a qualifying displacement is stored as a zone: the last down candle before a bullish push becomes demand, the last up candle before a bearish push becomes supply.
• Zone management — active blocks are held in parallel arrays, drawn as boxes extended to the right, faded by age and saturated by displacement strength, pruned once mitigated (price closes through them), and capped at a live maximum so the chart stays clean.
• Signals — a Buy fires when price taps a fresh demand block and closes back up (a bullish rejection); a Sell is the mirror at a supply block. An optional trend filter keeps you buying demand in uptrends and selling supply in downtrends, and a minimum-age plus minimum-gap rule stops a freshly formed block from self-triggering and prevents clustering.
Trade levels
Each signal draws a red risk box from entry to a stop placed beyond the block and a green reward box to the third target, with inner dividers and right-edge labels for entry, stop and each take-profit at your R multiples.
The dashboard
An adjustable order-flow-depth panel shows the trend bias, the live counts of demand and supply blocks, the distance to the nearest zone, a conviction estimate, the active signal, and a live first-target-before-stop tally from closed bars only.
How to use it
• Works on any asset and timeframe; larger timeframes produce fewer, more significant blocks.
• Trade reactions at fresh, unmitigated zones aligned with the trend filter; treat mitigated zones as spent.
• Use the nearest-zone distance to anticipate where a reaction may occur before it happens.
Settings
Displacement window and ATR size, fair-value-gap requirement, maximum live blocks and extension, minimum block age, trend filter length, risk buffer and target R multiples, plus visual and dashboard controls.
Originality and usefulness
The contribution is the full lifecycle model: an ATR-based displacement filter, objective block selection, age-and-strength-aware zone rendering, mitigation-based pruning, and a self-trigger guard — combined with a trend-filtered, non-repainting reaction signal and explained end to end.
Notes and limitations
• Not every tap of a zone reverses; blocks can and do break, which is why mitigation pruning and stops exist.
• Order-block definitions vary between traders; this engine uses one consistent, disclosed definition.
• The tally reflects only past bars on the current chart and is not a forecast.
• Educational and analytical tool, not financial advice.
— made with passion by officialjackofalltrades
Indicator
RSI Divergence Hunter [JOAT]RSI Divergence Hunter
Automatically detects the four classic RSI divergence types on confirmed pivots and frames each one as a trade.
What it is
Divergence between price and momentum is one of the oldest reversal and continuation reads, but marking it by hand is subjective and easy to force. This indicator detects all four divergence types algorithmically on confirmed pivots, so what you see is defined and repeatable, and then attaches a full trade structure to each. It is an original divergence engine, not a plain RSI plot.
How it works
• RSI core — the relative strength index measures the speed and size of recent moves. It is the momentum reference every divergence is measured against.
• Confirmed pivots — the engine waits for pivots on both price and RSI to confirm a set number of bars back before comparing them. Because pivots are only evaluated once confirmed, a plotted divergence does not repaint into or out of existence.
• The four types — regular bullish (price lower low, RSI higher low) and regular bearish (price higher high, RSI lower high) point to potential reversals; hidden bullish and hidden bearish point to trend continuation after a pullback. Each is drawn with a connecting line on both price and RSI and labelled by type.
• Zones and gating — overbought and oversold zones give context, and a minimum-gap control keeps divergence signals from stacking on lower timeframes.
Trade levels
Each qualifying divergence draws a red risk box to the stop and a green reward box to the third target, with inner dividers and right-edge labels for entry, stop and each take-profit at your R multiples. The stop is anchored beyond the pivot that formed the divergence.
The dashboard
An adjustable divergence-scope panel shows the current RSI value and zone, the most recent divergence type detected, the active signal, a conviction estimate, and a live first-target-before-stop tally from closed bars only.
How to use it
• Works on any asset and timeframe.
• Treat regular divergences as counter-trend reversal cues and hidden divergences as with-trend continuation cues — the distinction matters.
• Combine with structure or a trend filter; divergence works well as confluence, not in isolation.
Settings
RSI length and source, pivot strength, which divergence types to display, overbought/oversold levels, risk multiple and target R multiples, plus visual and dashboard controls.
Originality and usefulness
The contribution is a complete, confirmed-pivot detector for all four divergence classes with clear per-type labelling and integrated, non-repainting trade framing. By fixing the definition of a divergence and waiting for pivot confirmation, it removes much of the hindsight bias that makes manual divergence unreliable.
Notes and limitations
• Divergence signals can persist and reappear in strong trends; a divergence is a condition, not a timing guarantee.
• Confirmed pivots introduce a natural delay equal to the pivot strength — this is the cost of not repainting.
• The tally reflects only past bars on the current chart and is not a forecast.
• Educational and analytical tool, not financial advice.
— made with passion by officialjackofalltrades
Indicator
Quant Confluence Engine [JOAT]Quant Confluence Engine
Scores several independent market factors into one weighted composite, so signals fire on agreement across dimensions rather than on any single trigger.
What it is
Single-factor signals are fragile: a momentum cross, a moving-average flip or a volume spike each fails often on its own. This engine measures several independent factors, normalises them to a common scale, and blends them into one bipolar confluence score. A signal is produced only when enough factors line up, and the transparency of the score lets you see exactly why. It is an original scoring framework, not a bundle of overlaid classic indicators.
How it works
• The factors — the engine evaluates a set of complementary dimensions, each capturing a different aspect of the tape: trend alignment, momentum, volatility regime, volume behaviour, price structure and stretch relative to a mean. Each factor is computed with a standard, well-understood method and then scaled so it contributes fairly.
• Normalisation — every factor is converted to a bounded contribution, so no single input can dominate the composite purely because of its raw magnitude.
• Composite score — the contributions are combined into one signed 0-centred score. Positive means the factors lean bullish, negative bearish, and the magnitude expresses how strong the agreement is.
• State-machine signals — a Buy fires when the score crosses into sufficient bullish agreement from a non-bullish state; a Sell is the mirror. Because a signal requires a genuine state change, the engine will not re-fire the same direction bar after bar — signals are self-spacing by construction.
Trade levels
Each signal draws a red risk box to the ATR stop and a green reward box to the third target, with inner dividers and right-edge labels for entry, stop and each take-profit at your R multiples.
The dashboard
An adjustable factor-grid panel shows each factor's current lean (up or down) alongside a bipolar composite-score headline, the active signal, a conviction reading, and a live first-target-before-stop tally from closed bars only. The grid makes it obvious which factors are driving or vetoing a setup.
How to use it
• Works on any asset and timeframe; the factors adapt to the data.
• Read the grid before acting — a signal backed by broad agreement differs from one carried by a single strong factor.
• Raise the agreement requirement for fewer, higher-conviction signals, or lower it for more frequent ones.
Settings
Per-factor lengths and weights, the agreement threshold, ATR risk multiple and target R multiples, plus visual and dashboard controls.
Originality and usefulness
The value is the framework itself: a normalised, weighted multi-factor score with a transparent per-factor readout and a state-machine trigger that prevents signal spam. It is designed so a trader can inspect the reasoning, not just accept a label — which is precisely what a confluence approach should offer.
Notes and limitations
• Confluence reduces some false signals but does not remove them; correlated factors can all be wrong together in unusual conditions.
• Weighting is a design choice — different weights suit different markets, so treat the defaults as a starting point.
• The tally reflects only past bars on the current chart and is not a prediction.
• Educational and analytical tool, not financial advice.
— made with passion by officialjackofalltrades
Indicator
Institutional VWAP Bands [JOAT]Institutional VWAP Bands
An anchored VWAP with standard-deviation bands that classifies price as cheap, fair or expensive and offers two complementary playbooks: mean reversion and trend pullback.
What it is
VWAP is the benchmark institutions measure their own fills against — the market's running notion of fair value. Standard-deviation bands around it map where price is stretched relative to that benchmark. This indicator runs an anchored VWAP with three band pairs and turns them into a structured, non-repainting decision tool rather than a plain VWAP line.
How it works
• Anchored VWAP — volume-weighted average price accumulated from a chosen anchor (session, week or month) with a controlled reset, so the reference restarts cleanly each period.
• Sigma bands — three pairs of bands at one, two and three standard deviations of price around VWAP, computed from the same volume-weighted variance. These define the stretch zones.
• Value state — every bar is classified with a z-score into cheap, fair or expensive relative to VWAP. This drives the colour system and the dashboard.
• Mean-reversion fades — when price is stretched to the outer bands against the higher-timeframe trend and then reclaims back inside, a fade toward VWAP is signalled. The reclaim requirement is deliberate, so you are not blindly catching a falling knife.
• Trend-pullback entries — in a trend, a retracement to VWAP or the first band that holds is a discount entry in the trend direction. Both playbooks are labelled by type, and Buy/Sell are mutually exclusive with a minimum-gap control.
Trade levels
Each signal draws a red risk box to the ATR stop and a green reward box to the third target, with inner dividers and right-edge labels for entry, stop and each take-profit. For reversion signals the first target is clamped toward VWAP so it always sits on the profit side of entry.
The dashboard
An adjustable value-ladder panel shows the value state, the z-score, the trend bias, the active playbook and signal, a conviction estimate, and a live first-target-before-stop tally from closed bars only.
How to use it
• Choose the anchor that matches your style: session for intraday, week or month for swing context.
• Fade the outer bands only against the trend and with a reclaim; take pullbacks to VWAP with the trend.
• Works across assets and timeframes, though the anchor should suit the timeframe you trade.
Settings
Anchor period, VWAP source, three band multipliers, trend filter length, reversion trigger, ATR risk multiple and target R multiples, plus visual and dashboard controls.
Originality and usefulness
VWAP and deviation bands are standard building blocks; the contribution here is the explicit two-playbook logic (reclaim-based reversion versus trend pullback), the value-state classification that ties colour, dashboard and signals together, and the reversion target clamp — combined into one coherent, non-repainting framework and fully explained.
Notes and limitations
• VWAP is most meaningful on instruments with reliable volume; on symbols without real volume the bands lose accuracy, which is stated here honestly.
• Reversion trades against a strong trend carry inherent risk even with the reclaim filter.
• The tally reflects only past bars on the current chart and is not a forecast.
• Educational and analytical tool, not financial advice.
— made with passion by officialjackofalltrades
Indicator
