Trade Wzrd - Rift [Rampage Series]✨ THE RAMPAGE SERIES Is a growing series of roughly thirty volume-and-structure indicators, each built around the same conviction: price is the story, volume is the evidence, and levels are where the two negotiate. Every script in the series reads the market through traded volume - profiles, deltas, liquidity, nodes - and every single one ships with built-in automation . Not a bolted-on alert hack: a real order-string layer, the kind these tools almost never come with. Each Rampage script is an educational shell for learning and testing. None of them is a signal service.
Rift is the profile engine of the family - the one that finds the voids.
⚡ WHAT RIFT IS
Rift rebuilds a live volume profile every bar from lower-timeframe data - anchored to the clock (session, day, week) or to market structure (confirmed swing pivots) - and renders it as one clean instrument in the chart margin: delta-graded rows, Point of Control, Value Area, Point of Void, and the gaps where nobody traded at all.
Most profile tools show volume at price. Very few show the DELTA at each price - who was actually buying and who was selling inside every row - without paid order-flow data. Rift rebuilds that from the intrabar feed : each lower-timeframe bar's volume is signed by its direction and distributed across the price rows it traded through. The result is a profile that doesn't just say where volume traded, but who showed up to trade it.
The design rule is one region, one story. The profile lives in the right margin as a single silhouette - never scattered across your candles - while price itself carries only what you can act on.
✨ THE POINT OF VOID - WHY "RIFT"
Inside every Value Area there is one row where volume is thinnest - the weakest node, the place price met the least resistance on its way through. Rift measures it, names it, and marks it in orange: the Point of Void.
That thin crust is the rift. When price drives through it with delta support, it isn't hitting a wall - it's falling through open air, and it tends to travel. Sweeps fade. Bounces react. A void break continues. Three different events, three different trades, one engine that knows which is which.
⚡ THE THREE HUNTS
▶ Sweep & Reclaim - price pierces the Value Area edge and closes back inside. The raid that failed. Optionally gated by CVD divergence: price prints a new extreme while cumulative delta refuses to agree - the fingerprint of absorption.
▶ POC Bounce - rejection of the developing Point of Control, the single most-traded price of the profile.
▶ POV Void - price drives through the Point of Void with bar-delta support. Continuation, not a fade.
Every signal carries a typed chip (BUY · SWEEP, SELL · VOID...) with a hover deep-dive: node, ATR distance, wick %, bar delta, CVD, trend. Node-episode dedup keeps the engine honest - the same direction cannot re-fire at the same node inside the cooldown unless price has genuinely moved to a new one. An optional filter stack (ATR momentum guard, rejection wick, EMA trend, session window) sits underneath for those who want it.
✨ RISK THAT SITS ON STRUCTURE
Stops and targets can be framed two ways:
▶ ATR mode - the classic: stop a multiple beyond the sweep extreme, target by reward:risk.
▶ Structure mode - the Rift way: the stop sits a small buffer beyond the exact node the signal was born from, and the target is the nearest opposing profile node - POC, POV, or a Value Area edge. The trade is invalidated by structure breaking, not by an arbitrary distance, and it aims at the level the market itself built.
⚡ THE TRADE BOX - IT FREEZES WHERE IT DIES
Every signal draws its position as one object : entry line with a price tag, dashed stop, solid target, shaded risk and reward zones. The box follows price bar by bar - and the moment the stop or the target is hit, it freezes exactly there and leaves a TP HIT or SL HIT tag on the chart. Your past trades stay visible as they actually happened, not as you remember them. If one bar tags both sides, Rift calls the stop first - honest over flattering, always.
✨ LEVELS WITH MEMORY
▶ Retest lines - every signal draws the node it came from as a thin level that lives until breached or expired. Then, instead of vanishing, it stays on chart as darker dotted history: you can see which levels got filled and which held.
▶ Liquidity pools - swing highs and lows hold resting stops. Rails extend right until raided, die on the raid bar, and leave a faint swept zone when price pokes through and closes back inside. Where the stops were, where they got run.
▶ Level rails - neon POC, dotted POV, Value Area zone, and past profiles' POC/VAH/VAL kept on chart until crossed.
✨ HOW TO READ IT
• The margin profile is one silhouette: row width is volume, row color is delta, gold is the POC, orange is the POV, volume numbers print inside heavy rows (auto-inverted so they never camouflage), and the outline tint tells you who owns the profile - cyan buyers, pink sellers. The delta-% label on top opens the full stats on hover.
• A chip is a trade idea with receipts - hover it before you judge it.
• The trade box is the position. When it freezes, the idea is over; the tag says how.
• Dotted dark levels are filled history. Bright levels are still alive.
• The dashboard is the instrument panel: profile levels, session CVD, bar delta, regime, whale state, last signal, POC touches, automation state.
⚡ HOW TO USE
1) Add the script to a clean chart. Defaults are tuned for XAUUSD intraday; any symbol with volume works.
2) Choose the anchor: Period (D for day traders, W for swing) or Swing (structure-anchored).
3) Set the Intrabar Feed lower than your chart timeframe - 1-minute is the safe default.
4) Pick a signal model and a risk mode. ATR framing is the default; Structure framing ties stops and targets to the nodes.
5) Automation is built in.
✨ DEFAULTS
• Anchor: Period (Daily) | Intrabar Feed: 1m | Row height: ATR(14)/8 | Value Area: 70%
• Margin profile: 30 rows, offset 8 bars, max width 40 bars, outline + stats on | Signal cooldown: 8 bars
• Signals: All three models, CVD divergence 30 bars, bar delta confirm on, filters off
• Risk: ATR mode - stop ATR(14) × 1.5 beyond sweep, target 2R | Structure mode optional - node buffer 0.25 ATR, next-node target
• Trade box on | Filled retest lines kept as dotted history (20 max) | Liquidity rails on (pivot 5, 6 per side, swept zones on)
• Automation on: entries with SL/TP, close on opposite signal, close on TP/SL hit
⚡ LIMITATIONS AND HONEST NOTES
• This is an educational shell, not a validated strategy. It makes no performance claim and no edge claim. Nothing here is financial advice.
• Buy/sell split is estimated from intrabar direction (close vs previous close), not true tick-level bid/ask - on 1-minute data this is a close approximation; coarser feeds are coarser reads.
• Swing anchors and liquidity pivots confirm with a delay equal to the pivot length.
• The margin profile shows the current developing profile only; finished periods remain as POC/VAH/VAL level lines.
• TP/SL-hit detection is bar-based: on a bar that tags both, the stop is called first.
• Structure-mode targets depend on the developing profile; a fresh profile can move the nodes.
• Requires a symbol with volume data. Seconds feeds ("1S") depend on your plan's data availability.
• Past results do not predict future results. Not intended for non-standard chart types (Heikin Ashi, Renko, etc.). You own symbol mapping, risk, and execution choices.
No external links are required to understand or use this script.
Open source - Mozilla Public License 2.0.
Indicator
Market Profile VPOC Breakout - Imbalance SignalsA breakout setup does not fail because the setup is bad. It fails because it was taken in the wrong market phase. Roughly 70 % of the time price is INSIDE the higher-timeframe balance — inside fair value — and there a breakout has almost no edge. In the remaining ~30 %, when the market is OUT OF BALANCE, the identical trigger becomes one of the highest-probability trades there is. That combination shows up about ONCE PER DAY.
Market Profile VPOC Breakout automates that location-first workflow end to end: weekly and daily volume/TPO profiles, the value areas, the VPOC sequence, the transferred prior-day value-area edge, single prints, the P / b micro-profile proof, the entry trigger, the risk model and ready-to-use webhook JSON — all on one chart, with an explanation attached to every single object.
═══════════════════════════════
THE 7 CONFIRMATIONS
═══════════════════════════════
The panel walks you through them live, top to bottom, and nothing below step 1 matters while the market is in balance.
① WEEKLY LOCATION — the previous week's value area is the equilibrium. Price inside it = the 70 % phase → stand down. Price above VAH or below VAL = imbalance → hunt. The shaded zone on the chart is that balance; the background wash tells you at a glance which phase you are in (mint = imbalance up, red = imbalance down, gold = balance).
② EQUILIBRIUM TEST + REJECTION — the week opened outside the balance, price came back to TEST the weekly value area and was aggressively traded away from it again. That rejection is the proof that the market no longer wants to be in equilibrium.
③ TREND OF EQUILIBRIUM — the sequence of daily VPOCs. Rising VPOCs mean fair value itself is migrating up: the distribution of the participants' equilibrium is trending, which is exactly what a fast trade WITH the trend needs. Flat or overlapping VPOCs = balance = no trade. Drawn as a staircase over the session VPOCs.
④ PRIOR-DAY VALUE AREA BREAK — the previous session's value-area edge is transferred onto the execution timeframe as a thick green line. Price has to ACCELERATE through it, not drift.
⑤ SINGLE PRINTS — the indicator reads the running session's TPO grid and counts price rows that only ONE bar ever touched. Those rows are marked as a cyan SINGLE PRINT zone: the market moved so fast that no business was done there = aggressive buyers or sellers, not passive rotation.
⑥ P / b MICRO SHAPE — the micro profile of impulse + the small balance that forms on it is measured. POC in the upper part = P (aggressive buyers shifting equilibrium up) → long. POC in the lower part = b (sellers shifting it down) → short. A symmetric D is skipped. This is the P/b/D profile-shape logic used by two-time World Cup Championship of Futures Trading winner Patrick Nill.
⑦ TRIGGER — two variants, both switchable:
• BREAK-IN — price dips back into the P/b balance and is instantly bought / sold again (the aggressive, earlier entry, trend-continuing).
• BREAKOUT — a CLOSE beyond the balance edge with a higher (long) or lower (short) close. Never a wick.
═══════════════════════════════
RISK MODEL
═══════════════════════════════
Stop behind the structural invalidation (micro-balance edge, impulse origin or the reference level) plus an ATR buffer. TP1 in R multiples moves the stop to break-even, TP2 lets the runner work. And the rule that keeps this model alive: a TIME STOP. If the move does not run within N bars, get out — a failing breakout reverses just as fast as it was supposed to run. Risk and reward are drawn as blocks so the geometry is readable at a glance. One signal per session by default, because the model only exists about once a day.
═══════════════════════════════
WHAT IS ON THE CHART
═══════════════════════════════
• Session volume/TPO profiles with value area, VPOC and shape letter (P / b / D)
• Naked VPOC rays that keep running right as magnets
• Weekly profile + the prior-week balance zone projected into the current week
• The thick green transferred value-area edge with its own explanation
• Daily VPOC staircase and the imbalance gauge in the panel
• Single-print zones, micro-balance boxes with the big P / b letter
• BUY / SELL pills, the full numbered reason stack printed next to the signal, entry / SL / TP1 / TP2 rails, risk and reward blocks, TP / SL / BE / TIME exit tags
• A permanent BEGINNER CARD on the chart plus a HOW TO READ manual — every pill, zone, rail, letter and panel row also has its own hover explanation, so nothing on this chart is unexplained
• Two colour modes: Design (navy, mint / cyan / gold) or Original TPO (the classic grey market-profile look with red VPOC rays and a white profile curve)
═══════════════════════════════
AUTOMATION
═══════════════════════════════
Create ONE alert with the condition "Any alert() function call" and paste your webhook URL. Every BUY, SELL, TP1_HIT, TP2_HIT, SL_HIT, BE_EXIT, TIME_STOP and ARMED event posts ready-to-use JSON containing id, symbol, action, setup, shape, qty, price, entry, sl, tp1, tp2, pdvah, pdval, timeframe and time — connect it to any bridge or bot without touching the code. Separate alertconditions for BUY, SELL and "any signal" are also available.
═══════════════════════════════
HOW TO USE IT
═══════════════════════════════
Built for an intraday execution timeframe: 1m to 15m, exactly like the original workflow (locate on the weekly and daily profiles, execute on a 1-minute chart). Index futures and index CFDs are the natural home (NQ, ES, DAX, Nikkei), but the profile engine derives its bin size from the average daily range, so gold, FX and crypto work out of the box. For index futures switch on "cash session only" and set the exchange session so the overnight trade does not smear the profiles.
Every input is documented with a tooltip that explains what it does and why it exists. Start with the defaults, then loosen step 2 or step 3 if you want more signals — and be aware that every filter you switch off moves you back towards the 70 % phase where this trigger simply does not pay.
═══════════════════════════════
NOTES
═══════════════════════════════
The entry logic is mechanical and reproducible. Stop distances, targets and the time stop are parameters, not gospel: size them to the instrument you trade. Profiles are built from the bars of the chart you are on, so a finer timeframe gives a finer profile. Hit rates quoted in the educational material behind this model refer to the full workflow including discretionary session context — treat the signals as a structured, disciplined framework, not a guarantee, and always validate on your own data before risking capital.
Open source. Feedback and improvement ideas are welcome.
WHY THESE PARTS BELONG TOGETHER
The point of control and the breakout trigger are combined because a breakout setup does not fail
because the setup is bad, it fails because it was taken in the wrong market phase. The VPOC locates
that phase: a break away from a freshly built point of control is a different trade from a break
back into an old one. The imbalance measurement is the third piece - it tells you whether the move
away from the VPOC was one-sided enough to be worth following.
Indicator
Volume Profile P b D Shapes - Day PlaybookVOLUME PROFILE P b D SHAPES reads the market's body language: every trading day the volume profile prints a LETTER — P, b or D — and that letter tells you who is in control and exactly how to trade the next session. This indicator automates the complete PbD method: it builds every day's volume profile, classifies the shape, draws the levels, prints the playbook on your chart and fires webhook-ready JSON signals.
■ THE THREE LETTERS
P-SHAPE (bullish continuation) — fast impulse UP, then balance ON TOP. The thin tail below is single prints: nobody did business there. Buyers feel like winners, dips are for buying.
b-SHAPE (bearish continuation) — fast impulse DOWN, then balance AT THE BOTTOM. The thin tail above marks the drop. Sellers are in control, rallies are for selling.
D-SHAPE (balance day) — a symmetric bell curve with a fat POC in the middle. Buyers AND sellers are happy, fair price has been found. The next day usually stays range-bound: fade the edges.
■ THE AUTOMATED PLAYBOOK (7 SETUPS)
P behind you:
- PLAN A — CONTINUATION: price dips into yesterday's value area, the dip HOLDS (no low break), a reclaim candle closes back at/above the POC -> BUY. Targets: previous high, then a measured balance move.
- PLAN B — FAILURE = FULL TRAVERSE: 2+ candle CLOSES below the VAL (a wick is NOT enough) plus a volume spike = acceptance below balance. The shape has failed and price tends to walk the WHOLE way back to the impulse origin -> SELL.
b behind you: the exact mirror — sell failed rallies into value (Plan A), or buy the failure traverse when 2+ closes above VAH with volume appear (Plan B).
D behind you + today opens INSIDE the D:
- Range rules. Short the Value Area High rejection, long the Value Area Low rejection, target the POC first and the opposite edge second. The FIRST touch gives the best response — the fade counter limits how often each edge may be traded.
■ WHAT YOU SEE ON THE CHART
- A volume histogram for every completed day, colored by its letter (mint P / red b / gold D), POC row highlighted
- A big P / b / D letter above each day — hover it for the full lesson behind the shape
- Yesterday's VAH / VAL / POC projected into today as live rails with explanatory tooltips
- A bias note at every day open: which letter is behind you, where today opened, and both plans
- Two-line BUY/SELL pills that explain WHY the signal fired (hover for the complete reasoning + Entry/SL/TP1/TP2)
- Entry / SL / TP1 / TP2 lines, TP1 -> break-even management, TP2 runner
■ AUTOMATION / WEBHOOK
Create one alert with condition "Any alert() function call" and paste your webhook URL. Every BUY/SELL/TP1/TP2/SL/BE event sends ready-to-use JSON: id, symbol, action, setup, shape, entry, sl, tp1, tp2, timeframe, time. There is also an optional end-of-day SHAPE alert so your bot can pick tomorrow's playbook automatically.
■ HOW TO USE
1) Apply to an intraday chart (5m - 1h; crypto, indices, FX, stocks). 2) Let at least one full day close so the first letter prints. 3) Read the panel: previous-day letter -> today's bias -> checklist. 4) Take the pills or automate them via webhook. The first day on the chart only collects data — letters start from day two.
Educational note: shapes give a BIAS, not a guarantee — that is exactly why every setup ships with both Plan A and Plan B. Not financial advice.
WHY THESE PARTS BELONG TOGETHER
The volume profile and the shape classification are inseparable here. The profile alone tells you
where volume accumulated; the classification into P, b and D shapes is what turns that distribution
into a statement about who is trapped and where the day is likely to go. A P shape and a b shape can
contain identical volume and mean the opposite thing - which is only visible once the profile is
read as a letter rather than as a histogram.
Indicator
Impulse Box Breakout Engine - Origin Range Buy Sell SignalsIMPULSE BOX BREAKOUT ENGINE — a complete breakout trading system in one indicator: self-adjusting impulse boxes with entry arrow, stop, two fixed targets, a pink trailing-stop dot line and webhook automation. Rebuilt 1:1 from a professional German "Impulsbox" breakout engine (72-minute source webinar, analyzed frame by frame) and redesigned as a modern cockpit indicator.
█ WHAT IT DOES
The engine meters the market N bars back: the range the market traded in PLUS the length of every single bar inside it (compression check). When a STRONG impulse bar closes outside that range, the IMPULSE BOX appears over the consolidation:
• CYAN BOX = long breakout — big entry arrow inside the box
• GOLD BOX = short breakout — mirrored to the downside
• Initial stop = the far side of the box (bottom for longs, top for shorts)
• TARGET 1 + TARGET 2 (violet marks) are projected from the box height the moment the box appears — FIXED, never repainted, never moved afterwards
• PINK DOTS = the trailing stop. It starts at the box edge and follows price with ~30% of the move as breathing room. It only ratchets in your favor — never back
• At Target 1 the stop jumps to break-even or better. After Target 2 the system follows the source rule: "never leave the market voluntarily — let the stop take you out"
█ SELF-OPTIMIZING ENGINE
Markets are sideways ~80% of the time — rigid breakout parameters fail there. This engine adapts automatically:
• TREND regime (ADX based): short lookback, wider targets (+35% / +100% of box height)
• RANGE regime: longer lookback, stricter impulse filter, closer targets (+25% / +75%)
• AUTO-RECALIBRATION: after a false breakout the impulse threshold is raised temporarily — fewer but cleaner boxes. A winning box resets it
• The cockpit shows the current regime, calibration and effective parameters at all times
█ HONEST LIVE STATISTICS
The cockpit counts every box on your chart and shows the real Target-1 and Target-2 hit rates — no marketing numbers, live counted on your symbol and timeframe. On XAUUSD 15m the default engine printed 500+ boxes with a T1 hit rate above 90% at the time of publishing (past performance never guarantees future results).
█ DIRECTION BIAS FILTER
The #1 rule of the source system: trade boxes only in the direction of the higher-level move. The indicator automates this via EMA-200 + Supertrend bias. Choose: Off / Mark counter-bias boxes (dimmed + warning) / Filter them out completely. Supertrend companion arrows are included as extra confluence.
█ EVERY SIGNAL EXPLAINS ITSELF
Hover any BUY/SELL pill: how many bars of consolidation, how strong the impulse bar was (x average bar), which range edge broke, which regime the engine was in, whether the box agrees with the bias — plus entry, stop and both targets. No black box.
█ WEBHOOK AUTOMATION (BOTS / BRIDGES)
Create ONE alert with "Any alert() function call" and your webhook URL. The indicator fires ready-to-use JSON on BUY, SELL, T1_HIT, T2_HIT, TRAIL_EXIT and SL_HIT — including entry, stop, both targets, box levels, regime and live hit rates. Works with any webhook bridge, bot or auto-trader.
█ HOW TO USE
1) Add to chart — works on ALL symbols and ALL timeframes (crypto, gold, forex, indices, stocks)
2) Use standard candles or OHLC bars (Heikin-Ashi smoothing swallows breakouts — a key finding of the source webinar)
3) Wait for a box + arrow, entry at the breakout close, stop at the far box edge
4) Take partial profit at Target 1, let the rest run with the pink trailing dots
5) Automate via webhook JSON if you want
█ SETTINGS
Everything is configurable: manual mode with fixed lookback/impulse strength, target distances, trailing gap, exit-at-T2 mode, bias filter mode, Supertrend, chart theme, cockpit position and all alert toggles.
Educational tool only — not financial advice. Trading involves substantial risk. Always test on a demo account first and never risk money you cannot afford to lose.
WHY THESE PARTS BELONG TOGETHER
The impulse detection and the box are one mechanism, not two features. The impulse identifies the
candle sequence that moved the market; the box freezes the range that impulse came out of, because
that range is the level the market has to defend for the move to continue. Detecting impulses
without marking their origin gives you a signal with no invalidation, and drawing boxes without an
impulse gives you consolidation zones with no direction.
Indicator
MT5 Webhook Alert Template JSON alerts for any bridge A ready-to-use alert template that fires webhook-compatible JSON messages on
EMA-cross + RSI-filtered signals. Built to send PulseWire alerts straight to
MetaTrader 5 through any webhook bridge.
HOW TO USE (2 minutes):
1. Add the indicator to your chart.
2. Create an alert (Alt+A) on this indicator, condition "Any alert() function
call", and paste your bridge's webhook URL into the Webhook URL field.
3. Done — the alert message is already valid JSON, don't edit it.
MESSAGE FORMAT (works with most MT5 bridges):
{"action":"buy","symbol":"EURUSD","lot":0.01,"sl":50,"tp":100}
{"action":"sell","symbol":"EURUSD","lot":0.01,"sl":50,"tp":100}
- action: buy | sell | close | closeall
- sl / tp: distance in points (optional, set to 0 to omit)
- Symbol override input if your broker uses suffixes (e.g. EURUSD.pro)
Alerts evaluate on bar close (no intrabar repainting). The indicator is also
useful on its own as a visual signal — no bridge required.
DEFAULT SETTINGS WARNING:
The shipped defaults (Fast EMA 1 / Slow EMA 3 / RSI 2) are an intentionally
fast demo configuration so you can see signals right away. They will fire
VERY often, including many low-quality crosses. Signals only confirm on bar
close, so a cross can still appear and disappear intrabar before confirming.
Tune Fast/Slow EMA and RSI length to your own strategy and symbol before
using it live — treat the defaults as a starting point, not a ready system. Indicator
StocksDeveloperAlertsLibrary "StocksDeveloperAlerts"
AutoTrader Web alert builder by Stocks Developer — turn PulseWire alerts into real broker orders across many accounts and brokers. Ready-made functions for single orders, options the easy way, 8 option structures (straddle/strangle/spreads/iron condor/iron fly), custom multi-leg, account or group targeting, and your own risk limits. No alert-text typing. stocksdeveloper.in
order(symbol, exchange, producttype, tradetype, account, group, lots, quantity, ordertype, price, triggerprice, validity, amo, optiontype, strike, expiry, spothint, usespot, onslicefailure, risk, extra)
Build an alert message for a single order (stock, futures or one option leg). This is the full builder; equity() and option() are shorter wrappers over it. Set exactly one of account/group and exactly one of lots/quantity. Add optiontype to make it an option order.
Parameters:
symbol (string) : (series string) Broker-independent symbol, e.g. "NIFTY", "BANKNIFTY", "SBIN". For options, pass the underlier (e.g. "NIFTY"), not a full contract.
exchange (string) : (series string) Exchange code, e.g. "NSE"/"BSE" for stocks, "NFO" for options and futures.
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
tradetype (string) : (series string) BUY or SELL.
account (string) : (series string) Place in this single account. Set this OR group.
group (string) : (series string) Place in every live account in this group. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
ordertype (string) : (series string) MARKET (default), LIMIT, STOP_LOSS or SL_MARKET.
price (float) : (series float) Limit price (required for LIMIT).
triggerprice (float) : (series float) Trigger price (for stop-loss orders).
validity (string) : (series string) DAY (default) or IOC.
amo (bool) : (series bool) true for an after-market order.
optiontype (string) : (series string) CE for a call, PE for a put. Adding this makes it an option order.
strike (string) : (series string) ATM (default), ATM+1 / ATM-2, OTM / OTM2, ITM / ITM2, or an exact strike like "24500". Requires optiontype.
expiry (string) : (series string) weekly (default), next, monthly, or an exact date like "10-JUL-2026". Requires optiontype.
spothint (string) : (series string) Advanced: a spot price to help option-strike selection.
usespot (bool) : (series bool) Advanced: use the spot hint for strike selection.
onslicefailure (string) : (series string) Advanced: continue (default), alert or retry, if a large order that was auto-split has a slice fail.
risk (string) : (series string) A risk block from risk() — for example risk=atw.risk(maxloss=5000).
extra (string) : (series string) Advanced: any extra "key=value" lines to pass through unchanged (one per line).
Returns: (series string) The ready-to-send alert message.
equity(symbol, exchange, producttype, tradetype, account, group, lots, quantity, ordertype, price, triggerprice, validity, amo, risk, extra)
Build an alert for a single stock or futures order (no option fields). Set exactly one of account/group and exactly one of lots/quantity.
Parameters:
symbol (string) : (series string) Broker-independent symbol, e.g. "SBIN".
exchange (string) : (series string) Exchange code, e.g. "NSE" or "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
tradetype (string) : (series string) BUY or SELL.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
ordertype (string) : (series string) MARKET (default), LIMIT, STOP_LOSS or SL_MARKET.
price (float) : (series float) Limit price (required for LIMIT).
triggerprice (float) : (series float) Trigger price (for stop-loss orders).
validity (string) : (series string) DAY (default) or IOC.
amo (bool) : (series bool) true for an after-market order.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
option(symbol, exchange, producttype, tradetype, optiontype, strike, expiry, account, group, lots, quantity, ordertype, price, triggerprice, validity, amo, spothint, usespot, risk, extra)
Build an option order the easy way — give the underlier and pick the strike + expiry; no need to type the full option symbol. Set exactly one of account/group and exactly one of lots/quantity.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY", "BANKNIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
tradetype (string) : (series string) BUY or SELL.
optiontype (string) : (series string) CE for a call, PE for a put.
strike (string) : (series string) ATM (default), ATM+1 / ATM-2, OTM / OTM2, ITM / ITM2, or an exact strike like "24500".
expiry (string) : (series string) weekly (default), next, monthly, or an exact date like "10-JUL-2026".
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
ordertype (string) : (series string) MARKET (default), LIMIT, STOP_LOSS or SL_MARKET.
price (float) : (series float) Limit price (required for LIMIT).
triggerprice (float) : (series float) Trigger price (for stop-loss orders).
validity (string) : (series string) DAY (default) or IOC.
amo (bool) : (series bool) true for an after-market order.
spothint (string) : (series string) Advanced: a spot price to help strike selection.
usespot (bool) : (series bool) Advanced: use the spot hint for strike selection.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
straddle(symbol, exchange, producttype, account, group, lots, quantity, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Straddle — buy (or sell) a call and a put at the money. direction "BUY" = long straddle, "SELL" = short straddle.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) builds the structure as named; SELL flips every leg.
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue, if one leg cannot be placed.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
strangle(symbol, exchange, producttype, account, group, lots, quantity, width, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Strangle — buy (or sell) an out-of-the-money call and put, each 'width' strikes out. direction "BUY" = long strangle, "SELL" = short strangle.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
width (int) : (series int) How far out of the money the legs sit, in strike steps (default 2).
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) or SELL (flips every leg).
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
bullCall(symbol, exchange, producttype, account, group, lots, quantity, width, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Bull call spread — buy a call at the money and sell a call 'width' strikes out. Use direction "SELL" to reverse.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
width (int) : (series int) Distance between the two strikes, in strike steps (default 2).
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) or SELL (flips every leg).
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
bearPut(symbol, exchange, producttype, account, group, lots, quantity, width, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Bear put spread — buy a put at the money and sell a put 'width' strikes out. Use direction "SELL" to reverse.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
width (int) : (series int) Distance between the two strikes, in strike steps (default 2).
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) or SELL (flips every leg).
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
bullPut(symbol, exchange, producttype, account, group, lots, quantity, width, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Bull put spread (credit) — sell a put at the money and buy a put 'width' strikes out. Use direction "SELL" to reverse.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
width (int) : (series int) Distance between the two strikes, in strike steps (default 2).
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) or SELL (flips every leg).
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
bearCall(symbol, exchange, producttype, account, group, lots, quantity, width, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Bear call spread (credit) — sell a call at the money and buy a call 'width' strikes out. Use direction "SELL" to reverse.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
width (int) : (series int) Distance between the two strikes, in strike steps (default 2).
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) or SELL (flips every leg).
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
ironCondor(symbol, exchange, producttype, account, group, lots, quantity, width, wing, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Iron condor — sell a call and a put 'width' strikes out, and buy a call and a put 'width'+'wing' strikes out as protection. direction "BUY" builds this credit condor; "SELL" reverses it.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
width (int) : (series int) How far out the sold legs sit, in strike steps (default 2).
wing (int) : (series int) Extra distance out to the protective legs, in strike steps (defaults to width).
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) or SELL (flips every leg).
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
ironFly(symbol, exchange, producttype, account, group, lots, quantity, wing, expiry, direction, ordertype, price, onlegfailure, risk, extra)
Iron fly — sell a call and a put at the money, and buy a call and a put 'wing' strikes out as protection. direction "BUY" builds this credit fly; "SELL" reverses it.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
wing (int) : (series int) How far out the protective legs sit, in strike steps (default 2).
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
direction (string) : (series string) BUY (default) or SELL (flips every leg).
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
leg(optiontype, strike, tradetype, multiplier)
Build one option leg string for use with multiLeg(), e.g. atw.leg("CE", "ATM+2", "SELL", 2) -> "CE ATM+2 SELL x2".
Parameters:
optiontype (string) : (series string) CE for a call, PE for a put.
strike (string) : (series string) ATM, ATM+2, OTM2, ITM1, or an exact strike like "24500".
tradetype (string) : (series string) BUY or SELL for this leg.
multiplier (int) : (series int) Size multiplier for this leg (default 1).
Returns: (series string) The leg descriptor.
multiLeg(symbol, exchange, producttype, legs, account, group, lots, quantity, expiry, ordertype, price, onlegfailure, risk, extra)
Build an alert for a fully custom multi-leg order from a list of legs (1 to 10) made with leg(). Set exactly one of account/group and exactly one of lots/quantity.
Parameters:
symbol (string) : (series string) The underlier, e.g. "NIFTY".
exchange (string) : (series string) Options exchange code, e.g. "NFO".
producttype (string) : (series string) INTRADAY, DELIVERY, NORMAL or MTF.
legs (array) : (array) The legs, e.g. array.from(atw.leg("PE","ATM-2","SELL"), atw.leg("PE","ATM-6","BUY")).
account (string) : (series string) Single account. Set this OR group.
group (string) : (series string) Group of accounts. Set this OR account.
lots (int) : (series int) Number of lots. Set this OR quantity.
quantity (int) : (series int) Exact quantity. Set this OR lots.
expiry (string) : (series string) weekly (default), next, monthly, or an exact date.
ordertype (string) : (series string) MARKET (default) or LIMIT.
price (float) : (series float) Limit price (required for LIMIT).
onlegfailure (string) : (series string) alert (default), cancel or continue.
risk (string) : (series string) A risk block from risk().
extra (string) : (series string) Extra "key=value" lines to pass through unchanged.
Returns: (series string) The ready-to-send alert message.
riskLimits(maxloss, forceexit, entrywindow, blockExpiry)
Build a risk-limits block to attach to any order via risk=. Example: risk=atw.riskLimits(maxloss=5000). These are your own limits; see the Alert Automation guide for exactly how each one behaves.
Parameters:
maxloss (float) : (series float) Maximum day loss for the account, in your account currency.
forceexit (string) : (series string) A square-off time as "HH:mm", e.g. "15:15".
entrywindow (string) : (series string) An allowed entry-time window "HH:mm-HH:mm", e.g. "09:30-14:30".
blockExpiry (bool) : (series bool) Block new entries on the instrument's expiry day.
Returns: (series string) The risk lines, ready to pass as risk=. Library
StrategyWebhookJsonOverview
Open-source Pine library that builds JSON strings for strategy alert_message webhooks. Use it when a strategy should send structured trade signals to an external webhook receiver instead of plain alert text.
What it does
The library formats JSON payloads for three actions:
• open — new position (side, volume, stop loss, take profit, symbol, price)
• close — close by signal id
• modify — update stop loss and take profit for an existing signal id
Each payload includes secret, signalId, action, and symbol (from syminfo.ticker). Optional fields are omitted when not applicable. Strings are JSON-escaped.
Delivery modes (Mode enum)
• LocalOnly — returns an empty string (no JSON in alert_message)
• CloudOnly — returns JSON for webhook alerts
• Both — same as CloudOnly for alert_message output
How to use
1. Import the library into your strategy.
2. Call init(secret, mode) once and store the result in a var Config.
3. Pass the result of openMsg, closeMsg, or modifyMsg to strategy.entry, strategy.close, or strategy.exit via the alert_message parameter.
4. Create a strategy alert and set the webhook URL in PulseWire alert settings (PulseWire Plus or higher required for webhook URL field).
Example pattern
var cfg = init("YOUR_SECRET", Mode.CloudOnly)
strategy.entry("Long", strategy.long,
alert_message = openMsg(cfg, "Long", "buy", 0.1, sl, tp))
strategy.close("Long",
alert_message = closeMsg(cfg, "Long"))
Requirements
• Pine Script v6
• A strategy script (not an indicator)
• Webhook URL configured on the alert, not inside this library
Notes
signalId should be stable and unique per logical order so close and modify can target the correct open. The secret is included in the JSON body for authentication at the receiver. Library
All-Time High/Low Fibonacci Retracement (with Flip)Tired of manually dragging the Fibonacci tool across macro charts every time an asset makes a new high or low? This indicator automates the entire process. It scans the absolute historical data of any asset to identify its true All-Time High (ATH) and All-Time Low (ATL), then dynamically projects standard Fibonacci retracement levels between them.
Whether you are analyzing a stock's decades-long macro cycle or looking for major historical support and resistance levels, this script keeps your charts perfectly anchored without the manual clutter.
Key Features
100% Automated Tracking: Uses historical state variables (var) to lock onto the ultimate lowest and highest prices ever printed on your current chart.
Real-Time Dynamic Updates: If the asset breaks out into price discovery (new ATH) or capitulates to a new bottom (new ATL), the script recalculates and shifts all Fibonacci lines instantly.
One-Click Flip Toggle: Built-in calculation flip. Measure retracements from the top down (bearish retracement) or flip it from the bottom up (bullish expansion) right from the settings menu.
Clean Visuals: Hard-coded with classic Fibonacci ratios (23.6%, 38.2%, 50.0%, 61.8%, 78.6%) using a subtle, non-intrusive color gradient that won't crowd your daily price action.
How to Use the Settings
Flip Retracement (Checkbox): * Unchecked (Default): Places 0% at the All-Time High and 100% at the All-Time Low (Ideal for finding support levels during a pullback from macro highs).
Checked: Places 0% at the All-Time Low and 100% at the All-Time High (Ideal for tracking major resistance levels and targets on the way back up).
💡 Pro-Tip: Because PulseWire loads a limited number of historical bars on lower timeframes (like 5-minute or 15-minute charts), always load this indicator on a Daily (D), Weekly (W), or Monthly (M) chart first. This ensures the script catches the true historical inception highs and lows of the asset! Indicator
MTF Candle Countdown: Multi-Timeframe Close Timer ⏳ Know exactly how long until your candles close — on up to 4 timeframes at once, in one clean panel.
Stop switching charts to check the 1H or 4H while you trade the 5m. See every countdown you care about in one place.
──────────────────────────
✅ WHAT IT DOES
Shows a live countdown to candle close for up to 4 timeframes you choose, side by side. Each row shows the timeframe, the time left, and the exact clock time that candle will close.
──────────────────────────
⚙️ WHAT YOU CAN CONTROL
• Up to 4 timeframes — pick any, turn each on/off
• Corner — any of the 4 chart corners
• Font size — Small, Medium, or Large
• Text + background colors
• Close-time column — show/hide, and choose its timezone
• Near-close highlight — a row turns amber in the final seconds before close
──────────────────────────
🔔 ALERTS (two independent switches, both optional)
• "Closing soon" — fires shortly before a candle closes (your heads-up)
• "Candle closed" — fires the moment a candle closes (your confirmation)
Turn on either, both, or neither.
──────────────────────────
🌍 TIMEZONE — SET IT ONCE
PulseWire scripts can't read your chart's timezone, so pick yours in the "Close-time timezone" setting (New York, London, Tokyo, UTC, etc.). Set it to match your chart and the close times line up perfectly. Daylight saving is handled automatically.
──────────────────────────
ℹ️ GOOD TO KNOW
• A countdown timeframe must be the same as or higher than your chart timeframe. (A 1-minute countdown needs a ≤1-minute chart.) Rows below your chart timeframe show a gentle "use ≤Xm chart" reminder.
• Works on any symbol — crypto, forex, futures, stocks.
• On closed markets the countdown pauses until trading resumes (this is normal for all indicators).
• Not designed for Bar Replay — use it on a live chart.
──────────────────────────
🚀 HOW TO USE
1. Add to your chart
2. Open settings (gear icon)
3. Choose your timeframes, timezone, colors, and corner
──────────────────────────
👨💻 FOR DEVELOPERS / AUTOMATION
Set "Alert message format" to JSON event and the alerts emit a structured, webhook-ready payload (sent as application/json):
{"ticker":"BTCUSD","exchange":"COINBASE","timeframe":"4H","event":"closed","price":60800.5,"time":1749264000000}
("closing_soon" events also include "seconds_left".)
This is a TIMING EVENT source, not an order engine — it tells you WHEN a candle closes, with no buy/sell baked in (a countdown has no direction). Route the event to your webhook receiver or bridge (CrossTrade, NinjaView, your own listener, n8n, etc.) and map it to your platform's order format there. Each event fires once per candle (no spam). Prefer "Plain text" format for human phone/email alerts.
──────────────────────────
Free and open-source. Feedback welcome 🙏 Indicator
Auto Swing Trade Set Up v1.0 by [Itto-Ryu]Auto Swing Trade Set Up v1.0 is a Pine Script indicator for PulseWire, built for swing traders who have already decided their directional bias from external analysis and need a clean, math-consistent way to draw their entry, stop loss, take profit, and reversal levels on the chart.
Element Visual Purpose
Z1 (first fill) Solid amber box Primary entry zone
Z2 (averaging) Dashed amber box Secondary fill if price extends
Entry mid Dotted amber line The midpoint reference
SL Thick red line Stop loss (ATR-based)
TP1 Green dotted line Take 50% off here
TP2 Teal dotted line Take next 50% (or trail)
SFlip Purple dashed line Above this: Long thesis broken
LFlip Pink dashed line Below this: Short thesis broken
Direction badge Right of price ▲ LONG / ▼ SHORT + R:R ratio
Who This Is For
This tool is built for:
• Discretionary traders who form directional bias from fundamentals, news, sentiment, or proprietary analysis — and need a quick way to mark levels on the chart.
• CMT analysts who score setups using the 7-Pillar Rule-Based System and want the chart to reflect the decision, not make it.
• Crypto / FX / equity swing traders who think in pullback entries with averaging zones,
ATR-anchored stops, and R:R-based targets.
• Anyone who finds full-auto indicators noisy — too many false signals, too many ignored alerts,
too many overrides.
Who This Is NOT For
• Traders who want the indicator to tell them what to do.
• Algorithmic / fully automated systems
• Beginners who haven't yet developed a directional framework.
Principle One : Math, Not Judgment
All level calculations are pure formulas: entry midpoint, ATR multiples, R:R ratios. No conditional logic.No "if RSI is overbought then shift the stop." The same inputs always produce the same outputs.Why this matters: reproducibility. If you mark a Long on BTCUSD at 18:00 with these settings, then check the same chart tomorrow, the zones will be in the same place relative to that bar. There is no hidden state, no learned behavior, no drift.
Principle Two : One Decision, Many Outputs
The only decision you make is Long or Short. From that one bit of information, the indicator produces nine distinct visual elements (two zones, entry mid, SL, TP1, TP2, SFlip, LFlip, direction badge with R:R) each of them quantitatively derived
Why Manual Direction
The trader required to use other indicator for trend identifier and momentum such as EMA 20/50/100/200 , Ichimoku Cloud ,Price pattern and Dow theory , MACD, RSI ,ADX and etc. depend on their familiar or expertise in order to identify the whether they will open Long or Short . This indicator will help trader to get an outline instantly of action zone , entry , SL , TP and other critical point . However , manual decision for short or long might have an advantage because the auto detection or trend following signal might have a fall back as bellowing
• Chop kills auto signals. When price oscillates near the threshold, the indicator flips
Long-Short-Long, generating false setups every few bars.
• Late entries on real moves. When a strong trend breaks out, the indicator confirms only after the optimal entry zone has passed.
• Wrong side on news shocks. When fundamentals (CPI, FOMC, earnings) drive a sudden direction change, technicals lag the move by hours.
So , in practical especially swing trader who gain the profit from the gap might are required to doing the preemptive action such as open short 10% or a few portion when their consider it might be a peak so they can open in the good position before the signal is confirm
The Entry Midpoint
The entry midpoint (entryMid) is the single most important value the indicator computes. Everything else zones, SL, TP, flips — is derived from it.
Reference Selection
Two reference lines are pulled from the chart:
• EMA Fast (default length 20) — the standard short-term trend follower
• BB Basis (SMA-20) — the midline of the Bollinger Band system
The indicator then picks the appropriate one based on your chosen direction:
refHi = max(EMA20, BB_basis)
refLo = min(EMA20, BB_basis)
entryMid = isLong ? refHi : refLo
Rationale: For a Long, you want to enter on a pullback toward a support reference — the higher of the two candidates is usually closer to current price, making fills more likely. For a Short, the inverse.
ATR Clamping
Raw EMA/BB references sometimes sit too close to (or too far from) current price to be useful as entry zones. The indicator clamps the entryMid into a sensible band defined by ATR:
// LONG case
if entryMid > close: // too high
entryMid = close − ATR × 0.3
elif entryMid < close − ATR × 0.7: // too low
entryMid = close − ATR × 0.5
Dual Entry Zones
The indicator paints two zones stacked around the entryMid:
Zone Formulas
For a Long setup:
zone1Hi = entryMid + ATR × Z1_width // above mid
zone1Lo = entryMid // at mid
zone2Hi = entryMid // at mid
zone2Lo = entryMid − ATR × Z2_width // below mid
For a Short setup, the geometry inverts: Z1 sits below mid (first fill on a rally) and Z2 sits above
(averaging if rally extends).
Default Widths
Parameter Default Meaning
Z1 width 0.3 × ATR Slim zone for primary fill
Z2 width 0.6 × ATR Wider zone for averaging fills
How to Use Each Zone
Z1 (first fill, solid amber): Your primary entry. Allocate the larger portion of your intended position size here. Typical approach is 60-70% of position into Z1.
Z2 (averaging, dashed amber): Only triggers if price pushes past entryMid into the deep zone. Allocate the remaining 30-40% here. Beyond Z2, the next reference is SL — if price reaches SL without bouncing, the trade is invalidated and you accept the loss as planned.
Warning: Z2 is for averaging, NOT for unlimited adding. The math assumes total position cost basis falls between entryMid and Z2's deep edge. Adding outside Z2 voids the SL/TP geometry — your actual R:R will not match what's displayed.
Stop Loss (SL)
// LONG
slLevel = entryMid − ATR × SL_multiplier
// SHORT
slLevel = entryMid + ATR × SL_multiplier
risk = abs(entryMid − slLevel)
Default SL multiplier: 1.5 × ATR. This places the stop outside ordinary volatility, reducing premature stop-outs from noise while keeping the loss bounded.
Take Profit (TP1 & TP2) TPs are computed by R:R multiples of the calculated risk:
// LONG
tp1Level = entryMid + risk × TP1_RR // default RR = 1.5
tp2Level = entryMid + risk × TP2_RR // default RR = 2.5
// SHORT (subtract instead of add)
Execution playbook:
• TP1 hit: Close 50% of position. Move SL to breakeven (entryMid) for the remainder.
• TP2 hit: Close 25% of position. Trail the final 25% with EMA20 or a moving stop.
• Beyond TP2: You are now in a runner. The trade has paid its R, your downside is zero (breakeven SL). Let the winner work.
Flip Lines (SFlip & LFlip)
Flip lines mark the points where your directional thesis is broken. If price closes past a flip line, you should re-evaluate — possibly exiting and flipping direction.
// LONG case
shortFlip = entryMid + ATR × Flip_multiplier // upside flip
longFlip = slLevel // = SL
// SHORT case
shortFlip = slLevel // = SL
longFlip = entryMid − ATR × Flip_multiplier // downside flip
Default Flip multiplier: 2.0 × ATR. The asymmetry is deliberate: one flip line coincides with your SL(because if SL is hit, the thesis is dead by definition); the other sits one extra ATR's worth out, marking the point where the OPPOSITE trade would now make sense.
Settings & Configuration
All settings are accessible via the indicator's Settings dialog in PulseWire. Defaults are tuned for swing trading on 1H-Daily charts; adjust per timeframe and instrument.
Trade Direction Group
Input Type Default Purpose
Direction Dropdown Long Pick Long or Short
Show Zones Checkbox True Master on/off for all visuals
Risk Settings Group
Input Default Purpose
SL = ATR x 1.5 Stop multiplier
TP1 R:R 1.5 First profit target ratio
TP2 R:R 2.5 Second profit target ratio
Flip = ATR x 2.0 Direction-flip threshold
Line Length 50 bars How far back lines/boxes extend
Zone 1 width 0.3 × ATR Slim entry zone
Zone 2 width 0.6 × ATR Wide averaging zone
Tuning Per Timeframe
The defaults are a balanced compromise. For your style, consider:
Timeframe SL TP1 TP2 Flip
Scalp (5-15m) 1.0 1.0 1.5 1.5
Intraday (1H) 1.2 1.5 2.5 2.0
Swing (4H-D) 1.5 (default) 1.5 2.5 2.0
Position (D-W) 2.0 2.0 3.5 3.0
Common Mistakes To Avoid
• Re-running the indicator after price has moved. The zones recompute live on each bar. If you
formed your thesis at one bar's close, place your orders at THOSE levels, not the levels the indicator shows three bars later.
• Flipping direction without exiting first. Toggling Long → Short while a Long position is open
generates new zones for the Short setup but does NOT close your Long. Close manually first.
• Trading both directions on the same chart. Don't load two instances. Use one chart per
directional view. If you need to see both, use chart layouts (vertical split).
• Ignoring the SFlip / LFlip lines. These are not decorative. When price breaks them on a closing
basis, your thesis is broken. Acknowledge it.
• Over-tweaking the ATR multipliers per trade. Pick a setting per timeframe and stick with it for at least 20 trades before adjusting. Frequent tweaking is curve-fitting.
Enjoy ! developed by Thiranat Ngamchitcharoen (Itto-Ryu)
( Itto-Ryu is derived from school of one cut , this inspired me to create the series of indicator that help the trader which often need to make a decision at a glance before a good position have passed . )
Protected script
This script is published as closed-source. However, you can use it freely and without any limitations – learn more here.
Thiranat
Disclaimer
The information and publications are not meant to be, and do not constitute, financial, investment, trading, or other types of advice or recommendations supplied or endorsed by PulseWire. Read more in the Terms of Use.
Indicator
VoltRouter Webhook BuilderBuild PulseWire alert webhook payloads for VoltRouter — a signal routing service that executes your PulseWire strategy alerts directly at your broker. $0.07/signal, pay-as-you-go, no subscription required .
Supports: market, limit, stop, bracket (TP+SL), trailing stop, FLAT, and cancel-all.
How to use:
1. Sign up at voltrouter.com and connect your broker
2. Import this library in your strategy
3. Paste the output into a PulseWire alert → Webhook URL field
Setup: voltrouter.com
import VoltRouterWebhook as vr
// In your strategy alert message field:
vr.market("MNQM26", "buy", 1, "ibkr", "my_strategy")
vr.bracket("MNQM26", "sell", 1, close + 10, close - 5)
vr.flat("MNQM26") Library
Bot Webhook v8.5 - RSI Stoch Squeeze Regime Detection🔹 Multi-Timeframe Confluence Signal System v8.5 for SOL/USD
A data-driven signal indicator optimized for SOL perpetual futures across 30+ timeframes (30s to 20m). Every threshold has been backtested and fine-tuned using real trade data (2,100+ signals analyzed).
━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔸 HOW IT WORKS
The indicator combines multiple technical layers into a single confluence system:
- RSI + Stochastic K — Timeframe-specific oversold/overbought thresholds (not one-size-fits-all)
- RSI Slope — Momentum direction filter
- ADX — Trend strength gating to avoid choppy markets
- Bollinger Band / Keltner Channel Squeeze — Detects volatility compression and breakout moments (SHORT side only, proven 53.8% hit rate with 1.39x R/R)
- Volatility Regime Detection — Classifies market state (Trending, Ranging, Squeeze Building, Breakout Imminent) with automatic WEAK_UP blocking
- Dynamic Confidence Scoring — Each signal gets a 0–100% confidence rating based on regime, indicators, and historical win rate
━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔸 KEY FEATURES
✅ 30+ individually calibrated timeframes (30s, 45s, 1m–20m)
✅ Separate LONG & SHORT logic with independent RSI/K/Slope/ADX thresholds per timeframe
✅ Squeeze SHORT signals (Keltner breakout + bearish momentum + volume spike)
✅ Regime-aware filtering — blocks signals in unfavorable market conditions
✅ Confidence-based signal filtering (adjustable minimum threshold)
✅ Full info dashboard (regime, squeeze status, indicators, win rates, signal state)
✅ JSON webhook alerts with complete trade metadata (entry, SL, TP, ATR, regime, confidence)
━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔸 VERIFIED PERFORMANCE (from 2,100+ signal analysis)
📊 LONG base signals: 68.2% hit rate, 1.48x risk/reward
📊 Squeeze SHORT signals: 53.8% hit rate, 1.39x risk/reward
📊 Best performing timeframes: 30s, 45s, 12m+
━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔸 VISUAL GUIDE
🟢 Green triangle = LONG signal
🔴 Red triangle = SHORT signal
🟣 Purple diamond = Squeeze SHORT signal
🟡 Yellow background = Squeeze zone active
📊 Top-right table = Live dashboard with all indicator values
━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔸 WEBHOOK / BOT INTEGRATION
Alerts output JSON with full trade context — ready for automated bot integration via webhook. Includes entry, stop loss, take profit, ATR, RSI, regime, confidence score and more.
━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
This indicator is a tool for analysis, not financial advice. Past performance does not guarantee future results. Always manage your risk.
━━━━━━━━━━━━━━━━━━━━━━━━━━━
🤖 Want to fully automate these signals?
Check out FuturesBot — an automated crypto futures trading bot that executes signals like these 24/7 with smart profit protection, position management, and AI-powered trade validation.
👉 futuresbot.de Indicator
Automate on Hyperliquid - Strategy Webhook Template [HYPR-run]DESCRIPTION
You define the entry signal. The system manages everything after the fill. This is a production-grade trade system for automating strategies on Hyperliquid using PulseWire webhooks. Five-level priority chain trade system. Four ATR trailing architectures including volume-weighted ATR with Efficiency Ratio scaling and ratchet floor. Smart stops that exit when a trade is invalidated. Pyramid scaling into winners and a redundant failsafe stop.
Three signal systems are included ready to backtest and deploy (EMA crossover, Turtle breakout, SFP - Swing Failure Pattern) that you can toggle on/off independently; replace or extend them with your own logic in three places: the input toggle, the signal condition, and the priority chain entry call. There are clear landmarks in the code to make it as straightforward as possible.
This strategy is built for you to hit the ground running backtesting or automating with a systematic framework to execute around your entry logic or the example signals provided. All signals fire on confirmed bar closes only. Entries, exits, pyramids, and stops are evaluated at close, not during the bar, so intrabar wick spikes do not trigger the system. This is by design. No lookahead bias: all highest/lowest references use prior-bar offsets, LinReg is calculated with offset=1, and no security() calls are used. The script does not repaint or compound returns.
WHAT THE STRATEGY SYSTEMIZES
1. Five-Level Priority Action Chain
Entries fire first. Pyramids fire second and block exits on the same bar. Trailing exits ride winners. Smart stops catch failing trades early. Failsafe stop is the absolute floor. The if/else order is intentional and prevents conflicts so that every action occurs only when it should.
2. Four ATR Trailing Stop Modes
Select from a dropdown. All use separate long/short look backs and multipliers because drops are faster than rallies; the defaults reflect this asymmetry.
• A3.1: LinReg + plain ATR, no ratchet. Baseline for comparison.
• A4.0 (default): LinReg + volume-weighted ATR + Efficiency Ratio + ratchet. VWATR discounts low-volume bars. ER tightens in chop (0.8x), widens in trend (1.2x). Ratchet means the stop only moves in your favor.
• A4.1: Chandelier + VWATR + ratchet + first-bar multiplier for tighter initial protection.
• A4.2: LinReg + VWATR, no ratchet or ER. Stop moves freely with projection.
***The multipliers determine how much room the stop gives price before triggering. They have the greatest influence on overall system performance and must be tuned to the asset and timeframe being traded. Default values are a starting point, not final settings.
• L Multi: 4.0 (long stop distance). Wider because uptrends are slower and require more room.
• S Multi: 2.0 (short stop distance). Tighter because drops are faster and corrections are sharper.
• Long LB: 14 bars. ATR lookback for long stops.
• Short LB: 26 bars. ATR lookback for short stops; longer lookback smooths volatile short-side moves.
• LinReg LB: 10 bars. LinReg projection window (A3.1, A4.0, A4.2).
• First Bar Mult: 1.5x (A4.1 only). Tighter stop on the entry bar; expands to standard multiplier after.
3. Smart Stops
Two trigger paths, both requiring open P&L below threshold (default -3.5%): (1) price crosses under the trailing stop while losing, or (2) price breaks the entry bar’s structure while losing. Either path exits the trade before the failsafe would trigger. The P&L condition on both paths prevents exits on noise when the trade is still within normal range.
4. Pyramid Entries
Scales into winning trades on 5-bar extremes. Requires full bar confirmation and must be within 13 bars of the initial entry.
5. Basic Entry Quality Filters
Applied automatically to every entry:
• Wick nullification: bars with wicks > 38.2% of range block entries in that direction
• SFP nullification: active reversal patterns block opposing entries
• Full bar filter: candle body must be >= 66.6% of total range
• Bar confirmation: entries only fire on confirmed bars
THREE SIGNALS INCLUDED (replace or extend)
• XO/XU: EMA crossover with four configurable pairs (5/13, 9/26, 12/25, 26/128). Requires price above swing high (longs) or below swing low (shorts) plus volume spike (Dropdown Selection).
• Turtle: 13/26 bar breakout with Lost Trade System logic. First breakout after an opposing signal gets priority.
• SFP: Swing Failure Pattern. Longs fire on either 5/5 with full-body confirmation or 5/2 with bullish candle confirmation and strong volume spike (1.618x average). Shorts fire on 5/5 with full-body or 13/3 with bearish candle confirmation. Dual-path per direction allows the signal to catch both high-conviction structure failures and high-volume reversals. The function accepts any left/right look back combination, making it straightforward to adapt. (#/# refers to pivot look back left and right)
Each has its own toggle. Enable one, combine them, or swap in your own signals.
WEBHOOK AUTOMATION
Every fill event fires through PulseWire’s built-in webhook system when enabled: entries, exits, pyramids, smart stops, and failsafe closes. To execute those webhooks on Hyperliquid, an intermediary service (execution layer) that accepts PulseWire webhooks and routes orders to Hyperliquid's API is required.
Setup:
1. Create an alert on this strategy
2. Set trigger to "Order fills only"
3. Check Webhook URL, paste your endpoint
4. Message box: {"ticker":"{{ticker}}","position":"{{strategy.market_position}}"}
5. Set expiration to Open-ended
The snippet will most likely require customization depending on your execution layer. The {{ticker}} and {{strategy.market_position}} fields are PulseWire placeholders that auto-populate when a strategy signal fires.
We recommend referencing PulseWire’s Strategy Alerts documentation to fully understand placeholder use and function when setting up your snippet for your execution layer: www.pulsewire.com
BUILDING WITH YOUR OWN SIGNALS
The most straightforward path is adding your own entry logic. The ATR module, smart stops, and pyramids can also be edited to preferred logic while still leveraging the systemized structure for clean execution when automating on an exchange.
Option 1: Replace an existing signal. Find its section under the SIGNALS header (look for "EXAMPLE 1", "EXAMPLE 2", or "EXAMPLE 3"). Delete the example code and write your condition in its place. Find the matching entry in the STRATEGY CALLS priority chain and swap the condition variable. The toggle still works; rename its label in the input line. Everything downstream works automatically.
Option 2: Add a new signal. Three places to touch:
1. Copy a strategy toggle line from the STRATEGIES input group, change the variable name and label
2. Add your signal logic in the SIGNALS section as a boolean
3. Add an else-if block in the STRATEGY CALLS priority chain using your toggle as the gate
Two test switches (Tsw1, Tsw2) are reserved in Settings for custom signals.
READING THE CHART
Candles are colored by direction: black bodies up, gray bodies down (Quant Filter toggle).
The trailing stop draws as a colored line following your position: green below price when long, red/orange above price when short. A gradient fill shades the zone between price and the stop; it intensifies as price approaches the exit level.
Green dots on the long stop line and red dots on the short stop line are ratchet markers (A4.0 and A4.1 only). Each dot means the stop locked in a new level and will not pull back.
Entry labels appear at each fill: "xoL" (EMA long), "xuS" (EMA short), "tL" (Turtle long), "tS" (Turtle short), "sfpL"/"sfpS" (SFP entries), "pyrL"/"pyrS" (pyramid adds). Exit labels: "Cl"/"Cs" (trailing close long/short), "smrtstp" (smart stop), "fstp" (failsafe).
SFP candle wicks are color-coded by lookback: 5/5 bull wick = bright green, 5/2 bull wick = dark green, 5/5 bear wick = bright red, 13/3 bear wick = dark red. The shade tells you which configuration triggered — brighter means the more common 5/5 detection, darker means the secondary lookback fired.
Horizontal lines extending from entry price are the Late Entry Window: white solid line is entry price, green dashed line is entry + ATR window, red dashed line is entry - ATR window. Visual reference only; does not affect trade logic. Useful when away from the screen to quickly see if a missed entry is still within a safe ATR range.
Market structure labels (HH, LH, HL, LL) appear at swing pivots when the Structure toggle is enabled.
RISK MATH
Order size is fixed at $5,000 (50% of starting capital). That means it's always a flat $5k order, no compounding. With the failsafe at -5.25%, maximum loss per trade is $262.50, or 2.625% of the $10,000 starting balance.
*Because order size is fixed in dollars while equity grows, risk as a percentage of equity decreases over time: 2.625% at start, 2.1% at $12,500, 1.75% at $15,000. The smart stop triggers before the failsafe in most cases, reducing average realized loss further.
STRATEGY PROPERTIES (What's used in the chart published here)
Strategies (all off by default - toggle on to activate):
• XO/XU: on
• Turtle: on
• SFP: on
Settings:
• Mode: Historical (switch to Bot Mode for live automation - limits calculation depth for speed)
• EMA Pair: 9/26
Risk Management:
• Smart Stop: on | -3.5%
• Failsafe Stop: on | -5.25%
• Mech TP/Cls: on
ATR Trailing Exits:
• Mode: A4.0
• L Multi: 4.0 | S Multi: 2.0
• Lng LB: 14 | Shrt LB: 26
• LinReg: 10 | First Bar: 1.5 (A4.1 only)
Backtest Properties:
• Initial capital: $10,000
• Commission: 0.05%
• Slippage: 2 ticks
• Order size: $5,000 (cash, fixed)
• Fill limit assumption: 5 ticks
• Max risk per trade: $262.50 (2.625% of starting equity)
CREDITS
ATR: J. Welles Wilder (1978).
Efficiency Ratio: Perry Kaufman.
Turtle breakout concept: Richard Donchian. Strategy
Indicator
Quantum Flux Universal Strategy Summary in one paragraph
Quantum Flux Universal is a regime switching strategy for stocks, ETFs, index futures, major FX pairs, and liquid crypto on intraday and swing timeframes. It helps you act only when the normalized core signal and its guide agree on direction. It is original because the engine fuses three adaptive drivers into the smoothing gains itself. Directional intensity is measured with binary entropy, path efficiency shapes trend quality, and a volatility squash preserves contrast. Add it to a clean chart, watch the polarity lane and background, and trade from positive or negative alignment. For conservative workflows use on bar close in the alert settings when you add alerts in a later version.
Scope and intent
• Markets. Large cap equities and ETFs. Index futures. Major FX pairs. Liquid crypto
• Timeframes. One minute to daily
• Default demo used in the publication. QQQ on one hour
• Purpose. Provide a robust and portable way to detect when momentum and confirmation align, while dampening chop and preserving turns
• Limits. This is a strategy. Orders are simulated on standard candles only
Originality and usefulness
• Unique concept or fusion. The novelty sits in the gain map. Instead of gating separate indicators, the model mixes three drivers into the adaptive gains that power two one pole filters. Directional entropy measures how one sided recent movement has been. Kaufman style path efficiency scores how direct the path has been. A volatility squash stabilizes step size. The drivers are blended into the gains with visible inputs for strength, windows, and clamps.
• What failure mode it addresses. False starts in chop and whipsaw after fast spikes. Efficiency and the squash reduce over reaction in noise.
• Testability. Every component has an input. You can lengthen or shorten each window and change the normalization mode. The polarity plot and background provide a direct readout of state.
• Portable yardstick. The core is normalized with three options. Z score, percent rank mapped to a symmetric range, and MAD based Z score. Clamp bounds define the effective unit so context transfers across symbols.
Method overview in plain language
The strategy computes two smoothed tracks from the chart price source. The fast track and the slow track use gains that are not fixed. Each gain is modulated by three drivers. A driver for directional intensity, a driver for path efficiency, and a driver for volatility. The difference between the fast and the slow tracks forms the raw flux. A small phase assist reduces lag by subtracting a portion of the delayed value. The flux is then normalized. A guide line is an EMA of a small lead on the flux. When the flux and its guide are both above zero, the polarity is positive. When both are below zero, the polarity is negative. Polarity changes create the trade direction.
Base measures
• Return basis. The step is the change in the chosen price source. Its absolute value feeds the volatility estimate. Mean absolute step over the window gives a stable scale.
• Efficiency basis. The ratio of net move to the sum of absolute step over the window gives a value between zero and one. High values mean trend quality. Low values mean chop.
• Intensity basis. The fraction of up moves over the window plugs into binary entropy. Intensity is one minus entropy, which maps to zero in uncertainty and one in very one sided moves.
Components
• Directional Intensity. Measures how one sided recent bars have been. Smoothed with RMA. More intensity increases the gain and makes the fast and slow tracks react sooner.
• Path Efficiency. Measures the straightness of the price path. A gamma input shapes the curve so you can make trend quality count more or less. Higher efficiency lifts the gain in clean trends.
• Volatility Squash. Normalizes the absolute step with Z score then pushes it through an arctangent squash. This caps the effect of spikes so they do not dominate the response.
• Normalizer. Three modes. Z score for familiar units, percent rank for a robust monotone map to a symmetric range, and MAD based Z for outlier resistance.
• Guide Line. EMA of the flux with a small lead term that counteracts lag without heavy overshoot.
Fusion rule
• Weighted sum of the three drivers with fixed weights visible in the code comments. Intensity has fifty percent weight. Efficiency thirty percent. Volatility twenty percent.
• The blend power input scales the driver mix. Zero means fixed spans. One means full driver control.
• Minimum and maximum gain clamps bound the adaptive gain. This protects stability in quiet or violent regimes.
Signal rule
• Long suggestion appears when flux and guide are both above zero. That sets polarity to plus one.
• Short suggestion appears when flux and guide are both below zero. That sets polarity to minus one.
• When polarity flips from plus to minus, the strategy closes any long and enters a short.
• When flux crosses above the guide, the strategy closes any short.
What you will see on the chart
• White polarity plot around the zero line
• A dotted reference line at zero named Zen
• Green background tint for positive polarity and red background tint for negative polarity
• Strategy long and short markers placed by the PulseWire engine at entry and at close conditions
• No table in this version to keep the visual clean and portable
Inputs with guidance
Setup
• Price source. Default ohlc4. Stable for noisy symbols.
• Fast span. Typical range 6 to 24. Raising it slows the fast track and can reduce churn. Lowering it makes entries more reactive.
• Slow span. Typical range 20 to 60. Raising it lengthens the baseline horizon. Lowering it brings the slow track closer to price.
Logic
• Guide span. Typical range 4 to 12. A small guide smooths without eating turns.
• Blend power. Typical range 0.25 to 0.85. Raising it lets the drivers modulate gains more. Lowering it pushes behavior toward fixed EMA style smoothing.
• Vol window. Typical range 20 to 80. Larger values calm the volatility driver. Smaller values adapt faster in intraday work.
• Efficiency window. Typical range 10 to 60. Larger values focus on smoother trends. Smaller values react faster but accept more noise.
• Efficiency gamma. Typical range 0.8 to 2.0. Above one increases contrast between clean trends and chop. Below one flattens the curve.
• Min alpha multiplier. Typical range 0.30 to 0.80. Lower values increase smoothing when the mix is weak.
• Max alpha multiplier. Typical range 1.2 to 3.0. Higher values shorten smoothing when the mix is strong.
• Normalization window. Typical range 100 to 300. Larger values reduce drift in the baseline.
• Normalization mode. Z score, percent rank, or MAD Z. Use MAD Z for outlier heavy symbols.
• Clamp level. Typical range 2.0 to 4.0. Lower clamps reduce the influence of extreme runs.
Filters
• Efficiency filter is implicit in the gain map. Raising efficiency gamma and the efficiency window increases the preference for clean trends.
• Micro versus macro relation is handled by the fast and slow spans. Increase separation for swing, reduce for scalping.
• Location filter is not included in v1.0. If you need distance gates from a reference such as VWAP or a moving mean, add them before publication of a new version.
Alerts
• This version does not include alertcondition lines to keep the core minimal. If you prefer alerts, add names Long Polarity Up, Short Polarity Down, Exit Short on Flux Cross Up in a later version and select on bar close for conservative workflows.
Strategy has been currently adapted for the QQQ asset with 30/60min timeframe.
For other assets may require new optimization
Properties visible in this publication
• Initial capital 25000
• Base currency Default
• Default order size method percent of equity with value 5
• Pyramiding 1
• Commission 0.05 percent
• Slippage 10 ticks
• Process orders on close ON
• Bar magnifier ON
• Recalculate after order is filled OFF
• Calc on every tick OFF
Honest limitations and failure modes
• Past results do not guarantee future outcomes
• Economic releases, circuit breakers, and thin books can break the assumptions behind intensity and efficiency
• Gap heavy symbols may benefit from the MAD Z normalization
• Very quiet regimes can reduce signal contrast. Use longer windows or higher guide span to stabilize context
• Session time is the exchange time of the chart
• If both stop and target can be hit in one bar, tie handling would matter. This strategy has no fixed stops or targets. It uses polarity flips for exits. If you add stops later, declare the preference
Open source reuse and credits
• None beyond public domain building blocks and Pine built ins such as EMA, SMA, standard deviation, RMA, and percent rank
• Method and fusion are original in construction and disclosure
Legal
Education and research only. Not investment advice. You are responsible for your decisions. Test on historical data and in simulation before any live use. Use realistic costs.
Strategy add on block
Strategy notice
Orders are simulated by the PulseWire engine on standard candles. No request.security() calls are used.
Entries and exits
• Entry logic. Enter long when both the normalized flux and its guide line are above zero. Enter short when both are below zero
• Exit logic. When polarity flips from plus to minus, close any long and open a short. When the flux crosses above the guide line, close any short
• Risk model. No initial stop or target in v1.0. The model is a regime flipper. You can add a stop or trail in later versions if needed
• Tie handling. Not applicable in this version because there are no fixed stops or targets
Position sizing
• Percent of equity in the Properties panel. Five percent is the default for examples. Risk per trade should not exceed five to ten percent of equity. One to two percent is a common choice
Properties used on the published chart
• Initial capital 25000
• Base currency Default
• Default order size percent of equity with value 5
• Pyramiding 1
• Commission 0.05 percent
• Slippage 10 ticks
• Process orders on close ON
• Bar magnifier ON
• Recalculate after order is filled OFF
• Calc on every tick OFF
Dataset and sample size
• Test window Jan 2, 2014 to Oct 16, 2025 on QQQ one hour
• Trade count in sample 324 on the example chart
Release notes template for future updates
Version 1.1.
• Add alertcondition lines for long, short, and exit short
• Add optional table with component readouts
• Add optional stop model with a distance unit expressed as ATR or a percent of price
Notes. Backward compatibility Yes. Inputs migrated Yes. Strategy
Essa - Market Structure Crystal Ball SystemEssa - Market Structure Crystal Ball V2.0
Ever wished you had a glimpse into the market's next move? Stop guessing and start anticipating with the Market Structure Crystal Ball!
This isn't just another indicator that tells you what has happened. This is a comprehensive analysis tool that learns from historical price action to forecast the most probable future structure. It combines advanced pattern recognition with essential trading concepts to give you a unique analytical edge.
Key Features
The Predictive Engine (The Crystal Ball)
This is the core of the indicator. It doesn't just identify market structure; it predicts it.
Know the Odds: Get a real-time probability score (%) for the next structural point: Higher High (HH), Higher Low (HL), Lower Low (LL), or Lower High (LH).
Advanced Analysis: The engine considers the pattern sequence, the speed (velocity) of the move, and its size to find the most accurate historical matches.
Dynamic Learning: The indicator constantly updates its analysis as new price data comes in.
The All-in-One Dashboard
Your command center for at-a-glance information. No need to clutter your screen!
Market Phase: Instantly know if the market is in a "🚀 Strong Uptrend," "📉 Steady Downtrend," or "↔️ Consolidation."
Live Probabilities: See the updated forecasts for HH, HL, LL, and LH in a clean, easy-to-read format.
Confidence Level: The dashboard tells you how confident the algorithm is in its current prediction (Low, Medium, or High).
🎯 Dynamic Prediction Zones
Turn probabilities into actionable price areas.
Visual Targets: Based on the highest probability outcome, the indicator draws a target zone on your chart where the next structure point is likely to form.
Context-Aware: These zones are calculated using recent volatility and average swing sizes, making them adaptive to the current market conditions.
🔍 Fair Value Gap (FVG) Detector
Automatically identify and track key price imbalances.
Price Magnets: FVGs are automatically detected and drawn, acting as potential targets for price.
Smart Tracking: The indicator tracks the status of each FVG (Fresh, Partially Filled, or Filled) and uses this data to refine its predictions.
🌍 Trading Session Analysis
Never lose track of key session levels again.
Visualize Sessions: See the Asia, London, and New York sessions highlighted with colored backgrounds.
Key Levels: Automatically plots the high and low of each session, which are often critical support and resistance levels.
Breakout Alerts: Get notified when price breaks a session high or low.
📈 Multi-Timeframe (MTF) Context
Understand the bigger picture by integrating higher timeframe analysis directly onto your chart.
BOS & MSS: Automatically identifies Breaks of Structure (trend continuation) and Market Structure Shifts (potential reversals) from up to two higher timeframes.
Trade with the Trend: Align your intraday trades with the dominant trend for higher probability setups.
⚙️ How It Works in Simple Terms
1️⃣ It Learns: The indicator first identifies all the past swing points (HH, HL, LL, LH) and analyzes their characteristics (speed, size, etc.).
2️⃣ It Finds a Match: It looks at the most recent price action and searches through hundreds of historical bars to find moments that were almost identical.
3️⃣ It Analyzes the Outcome: It checks what happened next in those similar historical scenarios.
4️⃣ It Predicts: Based on that historical data, it calculates the probability of each potential outcome and presents it to you.
🚀 How to Use This Indicator in Your Trading
Confirmation Tool: Use a high probability score (e.g., >60% for a HH) to confirm your own bullish analysis before entering a trade.
Finding High-Probability Zones: Use the Prediction Zones as potential areas to take profit, or as reversal zones to watch for entries in the opposite direction.
Gauging Market Sentiment: Check the "Market Phase" on the dashboard. Avoid forcing trades when the indicator shows "😴 Low Volatility."
Confluence is Key: This indicator is incredibly powerful when combined with your existing strategy. Use it alongside supply/demand zones, moving averages, or RSI for ultimate confirmation.
We hope this tool gives you a powerful new perspective on the market. Dive into the settings to customize it to your liking!
If you find this indicator helpful, please give it a Boost 👍 and leave a comment with your feedback below! Happy trading!
Disclaimer: All predictions are probabilistic and based on historical data. Past performance is not indicative of future results. Always use proper risk management. Indicator
WebhookGeneratorLibrary "WebhookGenerator"
Generates Json objects for webhook messages.
GenerateOT(license_id, symbol, action, order_type, trade_type, size, price, tp, sl, risk, trailPrice, trailOffset)
CreateOrderTicket: Establishes a order ticket.
Parameters:
license_id (string) : Provide your license index
symbol (string) : Symbol on which to execute the trade
action (string) : Execution method of the trade : "MRKT" or "PENDING"
order_type (string) : Direction type of the order: "BUY" or "SELL"
trade_type (string) : Is it a "SPREAD" trade or a "SINGLE" symbol execution?
size (float) : Size of the trade, in units
price (float) : If the order is pending you must specify the execution price
tp (float) : (Optional) Take profit of the order
sl (float) : (Optional) Stop loss of the order
risk (float) : Percent to risk for the trade, if size not specified
trailPrice (float) : (Optional) Price at which trailing stop is starting
trailOffset (float) : (Optional) Amount to trail by
Returns: Return Order string Library
RSI Full Forecast [Titans_Invest]RSI Full Forecast
Get ready to experience the ultimate evolution of RSI-based indicators – the RSI Full Forecast, a boosted and even smarter version of the already powerful: RSI Forecast
Now featuring over 40 additional entry conditions (forecasts), this indicator redefines the way you view the market.
AI-Powered RSI Forecasting:
Using advanced linear regression with the least squares method – a solid foundation for machine learning - the RSI Full Forecast enables you to predict future RSI behavior with impressive accuracy.
But that’s not all: this new version also lets you monitor future crossovers between the RSI and the MA RSI, delivering early and strategic signals that go far beyond traditional analysis.
You’ll be able to monitor future crossovers up to 20 bars ahead, giving you an even broader and more precise view of market movements.
See the Future, Now:
• Track upcoming RSI & RSI MA crossovers in advance.
• Identify potential reversal zones before price reacts.
• Uncover statistical behavior patterns that would normally go unnoticed.
40+ Intelligent Conditions:
The new layer of conditions is designed to detect multiple high-probability scenarios based on historical patterns and predictive modeling. Each additional forecast is a window into the price's future, powered by robust mathematics and advanced algorithmic logic.
Full Customization:
All parameters can be tailored to fit your strategy – from smoothing periods to prediction sensitivity. You have complete control to turn raw data into smart decisions.
Innovative, Accurate, Unique:
This isn’t just an upgrade. It’s a quantum leap in technical analysis.
RSI Full Forecast is the first of its kind: an indicator that blends statistical analysis, machine learning, and visual design to create a true real-time predictive system.
⯁ SCIENTIFIC BASIS LINEAR REGRESSION
Linear Regression is a fundamental method of statistics and machine learning, used to model the relationship between a dependent variable y and one or more independent variables 𝑥.
The general formula for a simple linear regression is given by:
y = β₀ + β₁x + ε
β₁ = Σ((xᵢ - x̄)(yᵢ - ȳ)) / Σ((xᵢ - x̄)²)
β₀ = ȳ - β₁x̄
Where:
y = is the predicted variable (e.g. future value of RSI)
x = is the explanatory variable (e.g. time or bar index)
β0 = is the intercept (value of 𝑦 when 𝑥 = 0)
𝛽1 = is the slope of the line (rate of change)
ε = is the random error term
The goal is to estimate the coefficients 𝛽0 and 𝛽1 so as to minimize the sum of the squared errors — the so-called Random Error Method Least Squares.
⯁ LEAST SQUARES ESTIMATION
To minimize the error between predicted and observed values, we use the following formulas:
β₁ = /
β₀ = ȳ - β₁x̄
Where:
∑ = sum
x̄ = mean of x
ȳ = mean of y
x_i, y_i = individual values of the variables.
Where:
x_i and y_i are the means of the independent and dependent variables, respectively.
i ranges from 1 to n, the number of observations.
These equations guarantee the best linear unbiased estimator, according to the Gauss-Markov theorem, assuming homoscedasticity and linearity.
⯁ LINEAR REGRESSION IN MACHINE LEARNING
Linear regression is one of the cornerstones of supervised learning. Its simplicity and ability to generate accurate quantitative predictions make it essential in AI systems, predictive algorithms, time series analysis, and automated trading strategies.
By applying this model to the RSI, you are literally putting artificial intelligence at the heart of a classic indicator, bringing a new dimension to technical analysis.
⯁ VISUAL INTERPRETATION
Imagine an RSI time series like this:
Time →
RSI →
The regression line will smooth these values and extend them n periods into the future, creating a predicted trajectory based on the historical moment. This line becomes the predicted RSI, which can be crossed with the actual RSI to generate more intelligent signals.
⯁ SUMMARY OF SCIENTIFIC CONCEPTS USED
Linear Regression Models the relationship between variables using a straight line.
Least Squares Minimizes the sum of squared errors between prediction and reality.
Time Series Forecasting Estimates future values based on historical data.
Supervised Learning Trains models to predict outputs from known inputs.
Statistical Smoothing Reduces noise and reveals underlying trends.
⯁ WHY THIS INDICATOR IS REVOLUTIONARY
Scientifically-based: Based on statistical theory and mathematical inference.
Unprecedented: First public RSI with least squares predictive modeling.
Intelligent: Built with machine learning logic.
Practical: Generates forward-thinking signals.
Customizable: Flexible for any trading strategy.
⯁ CONCLUSION
By combining RSI with linear regression, this indicator allows a trader to predict market momentum, not just follow it.
RSI Full Forecast is not just an indicator — it is a scientific breakthrough in technical analysis technology.
⯁ Example of simple linear regression, which has one independent variable:
⯁ In linear regression, observations ( red ) are considered to be the result of random deviations ( green ) from an underlying relationship ( blue ) between a dependent variable ( y ) and an independent variable ( x ).
⯁ Visualizing heteroscedasticity in a scatterplot against 100 random fitted values using Matlab:
⯁ The data sets in the Anscombe's quartet are designed to have approximately the same linear regression line (as well as nearly identical means, standard deviations, and correlations) but are graphically very different. This illustrates the pitfalls of relying solely on a fitted model to understand the relationship between variables.
⯁ The result of fitting a set of data points with a quadratic function:
_________________________________________________
🔮 Linear Regression: PineScript Technical Parameters 🔮
_________________________________________________
Forecast Types:
• Flat: Assumes prices will remain the same.
• Linreg: Makes a 'Linear Regression' forecast for n periods.
Technical Information:
ta.linreg (built-in function)
Linear regression curve. A line that best fits the specified prices over a user-defined time period. It is calculated using the least squares method. The result of this function is calculated using the formula: linreg = intercept + slope * (length - 1 - offset), where intercept and slope are the values calculated using the least squares method on the source series.
Syntax:
• Function: ta.linreg()
Parameters:
• source: Source price series.
• length: Number of bars (period).
• offset: Offset.
• return: Linear regression curve.
This function has been cleverly applied to the RSI, making it capable of projecting future values based on past statistical trends.
______________________________________________________
______________________________________________________
⯁ WHAT IS THE RSI❓
The Relative Strength Index (RSI) is a technical analysis indicator developed by J. Welles Wilder. It measures the magnitude of recent price movements to evaluate overbought or oversold conditions in a market. The RSI is an oscillator that ranges from 0 to 100 and is commonly used to identify potential reversal points, as well as the strength of a trend.
⯁ HOW TO USE THE RSI❓
The RSI is calculated based on average gains and losses over a specified period (usually 14 periods). It is plotted on a scale from 0 to 100 and includes three main zones:
• Overbought: When the RSI is above 70, indicating that the asset may be overbought.
• Oversold: When the RSI is below 30, indicating that the asset may be oversold.
• Neutral Zone: Between 30 and 70, where there is no clear signal of overbought or oversold conditions.
______________________________________________________
______________________________________________________
⯁ ENTRY CONDITIONS
The conditions below are fully flexible and allow for complete customization of the signal.
______________________________________________________
______________________________________________________
🔹 CONDITIONS TO BUY 📈
______________________________________________________
• Signal Validity: The signal will remain valid for X bars .
• Signal Sequence: Configurable as AND or OR .
📈 RSI Conditions:
🔹 RSI > Upper
🔹 RSI < Upper
🔹 RSI > Lower
🔹 RSI < Lower
🔹 RSI > Middle
🔹 RSI < Middle
🔹 RSI > MA
🔹 RSI < MA
📈 MA Conditions:
🔹 MA > Upper
🔹 MA < Upper
🔹 MA > Lower
🔹 MA < Lower
📈 Crossovers:
🔹 RSI (Crossover) Upper
🔹 RSI (Crossunder) Upper
🔹 RSI (Crossover) Lower
🔹 RSI (Crossunder) Lower
🔹 RSI (Crossover) Middle
🔹 RSI (Crossunder) Middle
🔹 RSI (Crossover) MA
🔹 RSI (Crossunder) MA
🔹 MA (Crossover) Upper
🔹 MA (Crossunder) Upper
🔹 MA (Crossover) Lower
🔹 MA (Crossunder) Lower
📈 RSI Divergences:
🔹 RSI Divergence Bull
🔹 RSI Divergence Bear
📈 RSI Forecast:
🔹 RSI (Crossover) MA Forecast
🔹 RSI (Crossunder) MA Forecast
🔹 RSI Forecast 1 > MA Forecast 1
🔹 RSI Forecast 1 < MA Forecast 1
🔹 RSI Forecast 2 > MA Forecast 2
🔹 RSI Forecast 2 < MA Forecast 2
🔹 RSI Forecast 3 > MA Forecast 3
🔹 RSI Forecast 3 < MA Forecast 3
🔹 RSI Forecast 4 > MA Forecast 4
🔹 RSI Forecast 4 < MA Forecast 4
🔹 RSI Forecast 5 > MA Forecast 5
🔹 RSI Forecast 5 < MA Forecast 5
🔹 RSI Forecast 6 > MA Forecast 6
🔹 RSI Forecast 6 < MA Forecast 6
🔹 RSI Forecast 7 > MA Forecast 7
🔹 RSI Forecast 7 < MA Forecast 7
🔹 RSI Forecast 8 > MA Forecast 8
🔹 RSI Forecast 8 < MA Forecast 8
🔹 RSI Forecast 9 > MA Forecast 9
🔹 RSI Forecast 9 < MA Forecast 9
🔹 RSI Forecast 10 > MA Forecast 10
🔹 RSI Forecast 10 < MA Forecast 10
🔹 RSI Forecast 11 > MA Forecast 11
🔹 RSI Forecast 11 < MA Forecast 11
🔹 RSI Forecast 12 > MA Forecast 12
🔹 RSI Forecast 12 < MA Forecast 12
🔹 RSI Forecast 13 > MA Forecast 13
🔹 RSI Forecast 13 < MA Forecast 13
🔹 RSI Forecast 14 > MA Forecast 14
🔹 RSI Forecast 14 < MA Forecast 14
🔹 RSI Forecast 15 > MA Forecast 15
🔹 RSI Forecast 15 < MA Forecast 15
🔹 RSI Forecast 16 > MA Forecast 16
🔹 RSI Forecast 16 < MA Forecast 16
🔹 RSI Forecast 17 > MA Forecast 17
🔹 RSI Forecast 17 < MA Forecast 17
🔹 RSI Forecast 18 > MA Forecast 18
🔹 RSI Forecast 18 < MA Forecast 18
🔹 RSI Forecast 19 > MA Forecast 19
🔹 RSI Forecast 19 < MA Forecast 19
🔹 RSI Forecast 20 > MA Forecast 20
🔹 RSI Forecast 20 < MA Forecast 20
______________________________________________________
______________________________________________________
🔸 CONDITIONS TO SELL 📉
______________________________________________________
• Signal Validity: The signal will remain valid for X bars .
• Signal Sequence: Configurable as AND or OR .
📉 RSI Conditions:
🔸 RSI > Upper
🔸 RSI < Upper
🔸 RSI > Lower
🔸 RSI < Lower
🔸 RSI > Middle
🔸 RSI < Middle
🔸 RSI > MA
🔸 RSI < MA
📉 MA Conditions:
🔸 MA > Upper
🔸 MA < Upper
🔸 MA > Lower
🔸 MA < Lower
📉 Crossovers:
🔸 RSI (Crossover) Upper
🔸 RSI (Crossunder) Upper
🔸 RSI (Crossover) Lower
🔸 RSI (Crossunder) Lower
🔸 RSI (Crossover) Middle
🔸 RSI (Crossunder) Middle
🔸 RSI (Crossover) MA
🔸 RSI (Crossunder) MA
🔸 MA (Crossover) Upper
🔸 MA (Crossunder) Upper
🔸 MA (Crossover) Lower
🔸 MA (Crossunder) Lower
📉 RSI Divergences:
🔸 RSI Divergence Bull
🔸 RSI Divergence Bear
📉 RSI Forecast:
🔸 RSI (Crossover) MA Forecast
🔸 RSI (Crossunder) MA Forecast
🔸 RSI Forecast 1 > MA Forecast 1
🔸 RSI Forecast 1 < MA Forecast 1
🔸 RSI Forecast 2 > MA Forecast 2
🔸 RSI Forecast 2 < MA Forecast 2
🔸 RSI Forecast 3 > MA Forecast 3
🔸 RSI Forecast 3 < MA Forecast 3
🔸 RSI Forecast 4 > MA Forecast 4
🔸 RSI Forecast 4 < MA Forecast 4
🔸 RSI Forecast 5 > MA Forecast 5
🔸 RSI Forecast 5 < MA Forecast 5
🔸 RSI Forecast 6 > MA Forecast 6
🔸 RSI Forecast 6 < MA Forecast 6
🔸 RSI Forecast 7 > MA Forecast 7
🔸 RSI Forecast 7 < MA Forecast 7
🔸 RSI Forecast 8 > MA Forecast 8
🔸 RSI Forecast 8 < MA Forecast 8
🔸 RSI Forecast 9 > MA Forecast 9
🔸 RSI Forecast 9 < MA Forecast 9
🔸 RSI Forecast 10 > MA Forecast 10
🔸 RSI Forecast 10 < MA Forecast 10
🔸 RSI Forecast 11 > MA Forecast 11
🔸 RSI Forecast 11 < MA Forecast 11
🔸 RSI Forecast 12 > MA Forecast 12
🔸 RSI Forecast 12 < MA Forecast 12
🔸 RSI Forecast 13 > MA Forecast 13
🔸 RSI Forecast 13 < MA Forecast 13
🔸 RSI Forecast 14 > MA Forecast 14
🔸 RSI Forecast 14 < MA Forecast 14
🔸 RSI Forecast 15 > MA Forecast 15
🔸 RSI Forecast 15 < MA Forecast 15
🔸 RSI Forecast 16 > MA Forecast 16
🔸 RSI Forecast 16 < MA Forecast 16
🔸 RSI Forecast 17 > MA Forecast 17
🔸 RSI Forecast 17 < MA Forecast 17
🔸 RSI Forecast 18 > MA Forecast 18
🔸 RSI Forecast 18 < MA Forecast 18
🔸 RSI Forecast 19 > MA Forecast 19
🔸 RSI Forecast 19 < MA Forecast 19
🔸 RSI Forecast 20 > MA Forecast 20
🔸 RSI Forecast 20 < MA Forecast 20
______________________________________________________
______________________________________________________
🤖 AUTOMATION 🤖
• You can automate the BUY and SELL signals of this indicator.
______________________________________________________
______________________________________________________
⯁ UNIQUE FEATURES
______________________________________________________
Linear Regression: (Forecast)
Signal Validity: The signal will remain valid for X bars
Signal Sequence: Configurable as AND/OR
Condition Table: BUY/SELL
Condition Labels: BUY/SELL
Plot Labels in the Graph Above: BUY/SELL
Automate and Monitor Signals/Alerts: BUY/SELL
Linear Regression (Forecast)
Signal Validity: The signal will remain valid for X bars
Signal Sequence: Configurable as AND/OR
Condition Table: BUY/SELL
Condition Labels: BUY/SELL
Plot Labels in the Graph Above: BUY/SELL
Automate and Monitor Signals/Alerts: BUY/SELL
______________________________________________________
📜 SCRIPT : RSI Full Forecast
🎴 Art by : @Titans_Invest & @DiFlip
👨💻 Dev by : @Titans_Invest & @DiFlip
🎑 Titans Invest — The Wizards Without Gloves 🧤
✨ Enjoy!
______________________________________________________
o Mission 🗺
• Inspire Traders to manifest Magic in the Market.
o Vision 𐓏
• To elevate collective Energy 𐓷𐓏 Indicator
Strategy
PineConnectorLibrary "PineConnector"
This library is a comprehensive alert webhook text generator for PineConnector. It contains every possible alert syntax variation from the documentation, along with some debugging functions.
To use it, just import the library (eg. "import ZenAndTheArtOfTrading/PineConnector/1 as pc") and use pc.buy(licenseID) to send an alert off to PineConnector - assuming all your webhooks etc are set up correctly.
View the PineConnector documentation for more information on how to send the commands you're looking to send (all of this library's function names match the documentation).
all()
Usage: pc.buy(pc_id, freq=pc.all())
Returns: "all"
once_per_bar()
Usage: pc.buy(pc_id, freq=pc.once_per_bar())
Returns: "once_per_bar"
once_per_bar_close()
Usage: pc.buy(pc_id, freq=pc.once_per_bar_close())
Returns: "once_per_bar_close"
na0(value)
Checks if given value is either 'na' or 0. Useful for streamlining scripts with float user setting inputs which default values to 0 since na is unavailable as a user input default.
Parameters:
value (float) : The value to check
Returns: True if the given value is 0 or na
getDecimals()
Calculates how many decimals are on the quote price of the current market.
Returns: The current decimal places on the market quote price
truncate(number, decimals)
Truncates the given number. Required params: mumber.
Parameters:
number (float) : Number to truncate
decimals (int) : Decimal places to cut down to
Returns: The input number, but as a string truncated to X decimals
getPipSize(multiplier)
Calculates the pip size of the current market.
Parameters:
multiplier (int) : The mintick point multiplier (1 by default, 10 for FX/Crypto/CFD but can be used to override when certain markets require)
Returns: The pip size for the current market
toWhole(number)
Converts pips into whole numbers. Required params: number.
Parameters:
number (float) : The pip number to convert into a whole number
Returns: The converted number
toPips(number)
Converts whole numbers back into pips. Required params: number.
Parameters:
number (float) : The whole number to convert into pips
Returns: The converted number
debug(txt, tooltip, displayLabel)
Prints to console and generates a debug label with the given text. Required params: txt.
Parameters:
txt (string) : Text to display
tooltip (string) : Tooltip to display (optional)
displayLabel (bool) : Turns on/off chart label (default: off)
Returns: Nothing
order(licenseID, command, symbol, parameters, accfilter, comment, secret, freq, debug)
Generates an alert string. Required params: licenseID, command.
Parameters:
licenseID (string) : Your PC license ID
command (string) : Command to send
symbol (string) : The symbol to trigger this order on
parameters (string) : Other optional parameters to include
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: An alert string with valid PC syntax based on supplied parameters
market_order(licenseID, buy, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a market entry alert with relevant syntax commands. Required params: licenseID, buy, risk.
Parameters:
licenseID (string) : Your PC license ID
buy (bool) : true=buy/long, false=sell/short
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A market order alert string with valid PC syntax based on supplied parameters
buy(licenseID, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a market buy alert with relevant syntax commands. Required params: licenseID, risk.
Parameters:
licenseID (string) : Your PC license ID
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A market order alert string with valid PC syntax based on supplied parameters
sell(licenseID, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a market sell alert with relevant syntax commands. Required params: licenseID, risk.
Parameters:
licenseID (string) : Your PC license ID
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A market order alert string with valid PC syntax based on supplied parameters
closeall(licenseID, comment, secret, freq, debug)
Closes all open trades at market regardless of symbol. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closealleaoff(licenseID, comment, secret, freq, debug)
Closes all open trades at market regardless of symbol, and turns the EA off. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closelong(licenseID, symbol, comment, secret, freq, debug)
Closes all long trades at market for the given symbol. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closeshort(licenseID, symbol, comment, secret, freq, debug)
Closes all open short trades at market for the given symbol. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closelongshort(licenseID, symbol, comment, secret, freq, debug)
Closes all open trades at market for the given symbol. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closelongbuy(licenseID, risk, symbol, comment, secret, freq, debug)
Close all long positions and open a new long at market for the given symbol with given risk/contracts. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
risk (float) : Risk or contracts (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closeshortsell(licenseID, risk, symbol, comment, secret, freq, debug)
Close all short positions and open a new short at market for the given symbol with given risk/contracts. Required params: licenseID, risk.
Parameters:
licenseID (string) : Your PC license ID
risk (float) : Risk or contracts (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
newsltplong(licenseID, sl, tp, symbol, accfilter, comment, secret, freq, debug)
Updates the stop loss and/or take profit of any open long trades on the given symbol with the given values. Required params: licenseID, sl and/or tp.
Parameters:
licenseID (string) : Your PC license ID
sl (float) : Stop loss pips or price (according to EA settings)
tp (float) : Take profit pips or price (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
newsltpshort(licenseID, sl, tp, symbol, accfilter, comment, secret, freq, debug)
Updates the stop loss and/or take profit of any open short trades on the given symbol with the given values. Required params: licenseID, sl and/or tp.
Parameters:
licenseID (string) : Your PC license ID
sl (float) : Stop loss pips or price (according to EA settings)
tp (float) : Take profit pips or price (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closelongpct(licenseID, symbol, comment, secret, freq, debug)
Close a percentage of open long positions (according to EA settings). Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closeshortpct(licenseID, symbol, comment, secret, freq, debug)
Close a percentage of open short positions (according to EA settings). Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closelongvol(licenseID, risk, symbol, comment, secret, freq, debug)
Close all open long contracts on the current symbol until the given risk value is remaining. Required params: licenseID, risk.
Parameters:
licenseID (string) : Your PC license ID
risk (float) : The quantity to leave remaining
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
closeshortvol(licenseID, risk, symbol, comment, secret, freq, debug)
Close all open short contracts on the current symbol until the given risk value is remaining. Required params: licenseID, risk.
Parameters:
licenseID (string) : Your PC license ID
risk (float) : The quantity to leave remaining
symbol (string) : Symbol to act on (defaults to current symbol)
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
limit_order(licenseID, buy, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a limit order alert with relevant syntax commands. Required params: licenseID, buy, price, risk.
Parameters:
licenseID (string) : Your PC license ID
buy (bool) : true=buy/long, false=sell/short
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A limit order alert string with valid PC syntax based on supplied parameters
buylimit(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a buylimit order alert with relevant syntax commands. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A limit order alert string with valid PC syntax based on supplied parameters
selllimit(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a selllimit order alert with relevant syntax commands. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A limit order alert string with valid PC syntax based on supplied parameters
stop_order(licenseID, buy, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a stop order alert with relevant syntax commands. Required params: licenseID, buy, price, risk.
Parameters:
licenseID (string) : Your PC license ID
buy (bool) : true=buy/long, false=sell/short
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
buystop(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a buystop order alert with relevant syntax commands. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
sellstop(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Generates a sellstop order alert with relevant syntax commands. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
cancel_neworder(licenseID, order, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Cancel + place new order template function.
Parameters:
licenseID (string) : Your PC license ID
order (string) : Cancel order type
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
cancellongbuystop(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Cancels all long orders with the specified symbol and places a new buystop order. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
cancellongbuylimit(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Cancels all long orders with the specified symbol and places a new buylimit order. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
cancelshortsellstop(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Cancels all short orders with the specified symbol and places a sellstop order. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
cancelshortselllimit(licenseID, price, risk, sl, tp, betrigger, beoffset, spread, trailtrig, traildist, trailstep, atrtimeframe, atrperiod, atrmultiplier, atrshift, atrtrigger, symbol, accfilter, comment, secret, freq, debug)
Cancels all short orders with the specified symbol and places a selllimit order. Required params: licenseID, price, risk.
Parameters:
licenseID (string) : Your PC license ID
price (float) : Price or pips to set limit order (according to EA settings)
risk (float) : Risk quantity (according to EA settings)
sl (float) : Stop loss distance in pips or price
tp (float) : Take profit distance in pips or price
betrigger (float) : Breakeven will be activated after the position gains this number of pips
beoffset (float) : Offset from entry price. This is the amount of pips you'd like to protect
spread (float) : Enter the position only if the spread is equal or less than the specified value in pips
trailtrig (float) : Trailing stop-loss will be activated after a trade gains this number of pips
traildist (float) : Distance of the trailing stop-loss from current price
trailstep (float) : Moves trailing stop-loss once price moves to favourable by a specified number of pips
atrtimeframe (int) : ATR Trailing Stop timeframe, only updates once per bar close. Options: 1, 5, 15, 30, 60, 240, 1440
atrperiod (int) : ATR averaging period
atrmultiplier (float) : Multiple of ATR to utilise in the new SL computation, default = 1
atrshift (int) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default = 0
atrtrigger (int) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default = 0 (instant)
symbol (string) : The symbol to trigger this order on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment (maximum 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A stop order alert string with valid PC syntax based on supplied parameters
cancellong(licenseID, symbol, accfilter, comment, secret, freq, debug)
Cancels all pending long orders with the specified symbol. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A cancel long alert command
cancelshort(licenseID, symbol, accfilter, comment, secret, freq, debug)
Cancels all pending short orders with the specified symbol. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: A cancel short alert command
newsltpbuystop(licenseID, sl, tp, symbol, accfilter, comment, secret, freq, debug)
Updates the stop loss and/or take profit of any pending buy stop orders on the given symbol. Required params: licenseID, sl and/or tp.
Parameters:
licenseID (string) : Your PC license ID
sl (float) : Stop loss pips or price (according to EA settings)
tp (float) : Take profit pips or price (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
newsltpbuylimit(licenseID, sl, tp, symbol, accfilter, comment, secret, freq, debug)
Updates the stop loss and/or take profit of any pending buy limit orders on the given symbol. Required params: licenseID, sl and/or tp.
Parameters:
licenseID (string) : Your PC license ID
sl (float) : Stop loss pips or price (according to EA settings)
tp (float) : Take profit pips or price (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
newsltpsellstop(licenseID, sl, tp, symbol, accfilter, comment, secret, freq, debug)
Updates the stop loss and/or take profit of any pending sell stop orders on the given symbol. Required params: licenseID, sl and/or tp.
Parameters:
licenseID (string) : Your PC license ID
sl (float) : Stop loss pips or price (according to EA settings)
tp (float) : Take profit pips or price (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
newsltpselllimit(licenseID, sl, tp, symbol, accfilter, comment, secret, freq, debug)
Updates the stop loss and/or take profit of any pending sell limit orders on the given symbol. Required params: licenseID, sl and/or tp.
Parameters:
licenseID (string) : Your PC license ID
sl (float) : Stop loss pips or price (according to EA settings)
tp (float) : Take profit pips or price (according to EA settings)
symbol (string) : Symbol to act on (defaults to current symbol)
accfilter (float) : Optional minimum account balance filter
comment (string) : Optional comment to include (max 20 characters)
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
eaoff(licenseID, secret, freq, debug)
Turns the EA off. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string
eaon(licenseID, secret, freq, debug)
Turns the EA on. Required params: licenseID.
Parameters:
licenseID (string) : Your PC license ID
secret (string) : Optional secret key (must be enabled in dashboard)
freq (string) : Alert frequency. Default = "all", options = "once_per_bar", "once_per_bar_close" and "none"
debug (bool) : Turns on/off debug label
Returns: The required alert syntax as a string Library
ORB Heikin Ashi SPY 5min Correlation StrategyOverview:
The ORB (Opening Range Breakout) strategy combined with Heikin Ashi candles and Relative Volume (RVOL) indicator aims to capitalize on significant price movements that occur shortly after the market opens. This strategy identifies breakouts above or below the opening range, using Heikin Ashi candles for smoother price visualization and RVOL to gauge the strength of the breakout.
Components:
Opening Range Breakout (ORB): The strategy starts by defining the opening range, typically the first few minutes of the trading session. It then identifies breakouts above the high or below the low of this range as potential entry points.
Heikin Ashi Candles: Heikin Ashi candles are used to provide a smoother representation of price movements compared to traditional candlesticks. By averaging open, close, high, and low prices of the previous candle, Heikin Ashi candles reduce noise and highlight trends more effectively.
Relative Volume (RVOL): RVOL compares the current volume of a stock to its average volume over a specified period. It helps traders identify abnormal trading activity, which can signal potential price movements.
Candle for correlation : In this case we are using SPY candles. It can also use different asset
Strategy Execution:
Initialization: The strategy initializes by setting up variables and parameters, including the ORB period, session timings, and Heikin Ashi candle settings.
ORB Calculation: It calculates the opening range by identifying the high and low prices during the specified session time. These values serve as the initial reference points for potential breakouts. For this we are looking for the first 30 min of the US opening session.
After that we are going to use the next 2 hours to check for breakout opportunities.
Heikin Ashi Transformation: Optionally, the strategy transforms traditional candlestick data into Heikin Ashi format for smoother visualization and trend identification.
Breakout Identification: It continuously monitors price movements within the session and checks if the current high breaches the ORB high or if the current low breaches the ORB low. These events trigger potential long or short entry signals, respectively.
RVOL Analysis: Simultaneously, the strategy evaluates the relative volume of the asset to gauge the strength of the breakout. A surge in volume accompanying the breakout confirms the validity of the signal. In this case we are looking for at least a 1 value of the division between currentVolume and pastVolume
Entry and Exit Conditions: When a breakout occurs and is confirmed by RVOL and is within our session time, the strategy enters a long or short position accordingly. It does not have a stop loss or a takie profit level, instead it will always exit at the end of the trading session, 5 minutes before
Position Sizing and Commissions: For the purpose of this backtest, the strategy allocated 10% of the capital for each trade and assumes a trading commission of 0.01$ per share ( twice the IBKR broker values)
Session End: At the end of the trading session, the strategy closes all open positions to avoid overnight exposure.
Conclusion:
The combination of ORB breakout strategy, Heikin Ashi candles, and RVOL provides traders with a robust framework for identifying and capitalizing on early trends in the market. By leveraging these technical indicators together, traders can make more informed decisions and improve the overall performance of their trading strategies. However, like any trading strategy, it's essential to backtest thoroughly and adapt the strategy to different market conditions to ensure its effectiveness over time.
Strategy
libKageBotLibrary "libKageBot"
Library of function to generate command strings for bots FrostyBot and Zignally. This version ONLY WORKS WITH FROSTYBOT.
strSize(_sizePercent, _sizeCurrency)
Converts a float to a formated string suitable to position size in percentage or currency. At leaste one parameter must be given
Parameters:
_sizePercent : (float) Position size in percent value. Optional. Default = na. Mandatory if _sizeCurrency is not given.
_sizeCurrency : (float) Position size in currency value. Optional. Default = na. Mandatory if _sizePercent is not given.
Returns: (string) A formated string containing the position size
entry(_bot, _direction, _sizePercent, _sizeCurrency)
Generates a simple entry command string for a bot
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
_direction : (string) Flag to opena long or a short position. Must be either DIRECTION_LONG or DIRECTION_SHORT constant
_sizePercent : (float) Position size in percent value. Optional. Default = na. Mandatory if _sizeCurrency is not given.
_sizeCurrency : (float) Position size in currency value. Optional. Default = na. Mandatory if _sizePercent is not given.
Returns: (string) A string of a simple open position command
exit(_bot, _sizePercent, _sizeCurrency, _reduce)
Generates a simple exit command string for a bot
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
_sizePercent : (float) Position size in percent value. Optional. Default = na. Mandatory if _sizeCurrency is not given.
_sizeCurrency : (float) Position size in currency value. Optional. Default = na. Mandatory if _sizePercent is not given.
_reduce : (bool) Flag to use Ruce Only option on Binance positions. Optional. Default = true
Returns: (string) A string of a simple close position command
cancelAll(_bot)
Generates a command string for a bot that cancels all open orders
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
Returns: (string) A string of a command to cancel all open orders
leverage(_bot, _leverage, _type)
Generates a command string for a bot to set leverage
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
_leverage : (int) The amount of leverage to be used when opening a position. Optional. If does not given, the bot's default will be used
_type : (string) Type of leverage. Must be either LEVERAGE_CROSS or LEVERAGE_ISOLATED. Optional. Default is LEVERAGE_CROSS.
Returns: (string) A string of a simple leverage command
entryLong(_bot, _leverage, _leverageType, _sizePercent, _sizeCurrency)
Generates a complete long entry command string for a bot
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
_leverage : (int) The amount of leverage to be used when opening a position. Optional. If does not given, the bot's default will be used
_leverageType : (string) Type of leverage. Must be either LEVERAGE_CROSS or LEVERAGE_ISOLATED. Optional. Default is LEVERAGE_CROSS.
_sizePercent : (float) Position size in percent value. Optional. Default = na. Mandatory if _sizeCurrency is not given.
_sizeCurrency : (float) Position size in currency value. Optional. Default = na. Mandatory if _sizePercent is not given.
Returns: (string) A string of a complete open long position command
entryShort(_bot, _leverage, _leverageType, _sizePercent, _sizeCurrency)
Generates a complete short entry command string for a bot
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
_leverage : (int) The amount of leverage to be used when opening a position. Optional. If does not given, the bot's default will be used
_leverageType
_sizePercent : (float) Position size in percent value. Optional. Default = na. Mandatory if _sizeCurrency is not given.
_sizeCurrency : (float) Position size in currency value. Optional. Default = na. Mandatory if _sizePercent is not given.
Returns: (string) A string of a complete open short position command
exitPosition(_bot, _sizePercent, _sizeCurrency, _reduce)
Generates a complete close position command string for a bot
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
_sizePercent : (float) Position size in percent value. Optional. Default = na. Mandatory if _sizeCurrency is not given.
_sizeCurrency : (float) Position size in currency value. Optional. Default = na. Mandatory if _sizePercent is not given.
_reduce : (bool) Flag to use Ruce Only option on Binance positions. Optional. Default = true
Returns: (string) A string of a comlete close position command
printBot(_bot, _command)
Print bot's information for debug purposes
Parameters:
_bot : (TradeBot) Previously instancied bot type variable
_command : (string) A command string to be debugged
Returns: Nothing.
Constants
Constants to be used in both in internal and external code
Fields:
SERVER_FROSTBOT : (string) Identifier to FrostyBot
SERVER_ZIGNALY : (string) Identifier to Zignaly
DIRECTION_LONG : (string) Flag to open a long position
DIRECTION_SHORT
LEVERAGE_CROSS : (string) Flag to set leverage to cross
LEVERAGE_ISOLATED : (string) Flag to set leverage to isolated
TradeBot
Bot type to handle its essential information
Fields:
server : (string) Type o server. Must me one of the SERVER_* constant values
id : (string) Id of the account in the server (Stub for FrostyBot or Key to Zignally)
symbol : (string) Symbol of the pair to be negotiated (example: ETH/USDT)
leverage : (int) Leverage coeficient. Default is 1 Library
Strategy
