Alerts

Correlation Oscillator - Anomaly Alerts This script plots the correlation for two symbols as an oscillator: A correlation of 1 means that both values move in the same direction together. A correlation of -1 means that both values are perfectly negative correlated. Parameter: Length of the Correlation The two symbols you want to calculate the correlation for Barcolor: Defines whether Bar-coloring is set on. The Number of bars lookback for anomaly: Say both are normally positively correlated it is an anomaly when the correlation turns negative and vica-versa. Alerts: You can also set an Alert when an anomaly is detected.(blue dots on oscillator) This has many use-cases: For example VVIX and VIX are normally positive correlated. When this turns negative, this can mean that we are on a turning point: --> VVIX is rising while VIX is falling, risk of future Volatility is increasing (Top) --> VIX is rising while VVIX is falling, risk of future Volatility is decreasing (Bottom) Another use-case is just checking the correlation of stocks in your portfolio to diversify.

Indicator

Open Close Cross Strategy R6.1 revised by yourmattie Original version: Open Close Cross Strategy R5 revised by JustUncle. Change: script changed to a study script with custom alerts. This revision is an open Public release, with just some minor changes. It is a revision of the Strategy "Open Close Cross Strategy R2" originally published by @JayRogers. Revised by JustUncleL Description : Strategy based around Open-Close Moving Average Crossovers optionally from a higher time frame. Read more about the indicator original script Klik here ##USE AT YOUR OWN RISK## Use this as overlayer on the original strategy to set custom alerts. Info: with this study script no buy/sell arrows show up op the chart. Does some know a solution for this issue: Issue: sometimes it gives a false signal because even when you set "one per bar close" the custom set alert might come halfway the bar....and it might be a false signal when the bar is closed Does somone know a fix for this? I tried with barstate.iscomfirmed but it didn't work for me. Ps. I'm not a developer...just changed the scipt by watching a youtube tutorial.

Indicator

MACD With Trend Filter: Visual Backtest Module Template Sample Strategy: MACD Crossover with trend filter options MA Filter : Price Close Above MA, Search for Buy, Price Close Below MA, Search for Sell ADX Filter : Take trade only when ADX is above certain treshold MACD Signal : MACD Cross above signal line while under 0 line indicate Buy Signal MACD Cross below signal line while above 0 line indicate Sell Signal ----------------------------- Using Alert Module: Enable Alert --> Enable TV's alert and plot signal to chart Alert Type --> Set to take Buy only, Sell only or Both alert ---------------------------- Using Backtest Module: Enable Backtest --> Enable Backtest simulation Backtest Type --> Set to take Buy only, Sell only or Both SL Type --> ATR : Set SL in ATR times Multiplier below/above entry price Fixed : Set SL in fixed point below entry point (in 'Dollar'). e.g. for Stocks -> 0.5 equals to 50cent while for EURUSD currency -> 0.005 equal to 50 pips HiLo Bar : Set SL at highest/lowest wick of previous bar plus/minus Fixed point. e.g. EURUSD HiLo=3 and Fixed Point = 0.0005, buy trade will place SL 5 Pips below lowest of previous 3 bar SL ATR Period --> Set Lookback Period used for SL's ATR calculation SL ATR Multi --> Set ATR Multiplier for SL SL Fixed --> Set Fixed Level for SL (Use when SL Type is either Fixed or HiLo Bar) SL Bar --> Set Number of previous bar to check for SL placement TP RR Ratio --> Set TP based on RR multiplier. e.g. 2 means TP level will be twice further from entry point compared to Entry-SL distance. Notes: The point is for preliminary testing, so it only supports 1 trade at a time and no Trailing Stop ---------------------------- Disclaimer: This script main objective is to create my personal indicator template so that i just have to modify the indicator module for preliminary testing in future. Testing Alert Module so i can re-use it as template in future study/indicator Testing Visual Backtest Module so i can re-use it as template in future study/indicator i believe using Strategy function is a better approach for this but the entry/exit level seems to be hit n miss (at least for me, still trying to figure what i did wrong) also, i rather code the strategy in other platform where i can use the more accurate tick data if i want to validate backtest statistics. My study scripts was built only to test/visualize an idea to see its viability and if it can be used to optimize existing strategy. credit: ADX code are originally from "ADX and DI" by @BeikabuOyaji although i re-wrote so i can have cleaner read and use RMA instead of SMA

Indicator

by fareidzulkifli

Trend Trader Buy/Sell Signals Trend Trader The code is open source, what it uses to print signals is MACD cross and ADX. Bar colors change in relation to where price is according to the 50 day MA. The MA ribbon is used for visualizing trend and using it for dynamic support/resistance. The ribbon is comprised of the 50 day and 100 day MAs. Main reason to publish this script is because some like to jumble up scripts together slap some moving averages on it to "follow trend" and then label it an algorithm, market it and sell it to people online. No single system will work 100% of the time, do you due diligence in anything you are interested in buying. Plenty of free scripts in the TV library that can do you justice when trading.

Indicator

by UnknownUnicorn1946597

One Percent Move Study (For your Alerts)This is a simple script that can be used to alerts. The signal1 variable goes to 100 if there is a 1% up move in a tick, and goes to -100 if there is a 1% down move in a tick for an asset. This is best on a 1 minute or 5 minute chart. This example shows this on the DeFi exchange Uniswap for the UNI/ETH pair

Indicator

BTC & ETH Alert System With Tradingview's free plan, only one alert is allowed. The purpose of this indicator is to allow for two alerts--one for BTC and one for ETH. How to use the alert system: 1. Set the desired value for BTC and ETH that you want to be alerted for 2. Set an alert on the indicator by clicking the three ellipses and then "Add Alert" 3. Set the alert to go off if the value of the indicator is greater than 0. The example is of BTC using an alert of $10,000 and an alert of ETH at $2,000 (untriggered) The script can be easily modified to be used for different assets

Indicator

RSI, STOCHASTIC, KELTNER AND EMA CROSSES COMBINED I have combined RSI and Stochastic but also added an keltner channel and then also two EMA's. How the indicator works is the background turns green when the rsi and stochastic are below 20 and the keltner channel is below X and also your fast ema is below your slow ema and then vice versa for sell signals. Feel free to leave a comment on what you think and what could be improved on it because i know their is some fine tuning to do and some improvement that can be made and I'm sure i'll be updating this myself. All the variables are interchangable and the indicator has alert functionality.

Indicator

TST Signals & Alerts This is an unofficial script for strategies tested on Trading Strategy Testing Youtube channel. Over time, most successful strategies will be added with an option to set strategy-specific alerts . TST Signals & Alerts will draw signals on the chart when the entry conditions are met. You can also opt for displaying indicators . My script is meant for beginners but can be used by veterans too. Just pick one or two strategies, you don't want to flood your chart with conflicting signals. You may want to support your trades with a proper analysis. Is the market trending? Is there a fundament around the corner? If a new signal occurs when there is still an open position, you are not supposed to take another. The current version includes MACD and ADX + BB and BB strategies. MACD strategy: ►Buy, when MACD crosses below the signal line when it is negative. The price must also be above 200 EMA. ►Sell, when MACD crosses above the signal line when it is positive. The price must also be below 200 EMA. ►This strategy was tested on 15-minute charts of EURUSD with reward-to-risk ratio 1,5 and win rate of 61% over 100 trades. ►►►MACD has to be added to your chart separately because it needs a new window. Ticking display indicators will not add MACD to your chart. ►►►MACD was also tested by a different channel I made a script for. You can view the results and the script here: ADX + BB strategy: ►Buy, when the price is above 200 EMA and ADX becomes higher than 25. ►Sell, when the price is below 200 EMA and ADX becomes higher than 25. ►Stop-loss is either 200 EMA or Bollinger Bands level. Check the channel for more information. ►This strategy was tested on 5-minute charts of EURUSD, USDJPY, AUDUSD with reward-to-risk ratio 1,2 and win rate of 56% over 100 trades in total. BB strategy: ►Buy, when the price is above 200 EMA and candle's low is below the lower Bollinger Band. ►Sell, when the price is below 200 EMA and candle's high is above the upper Bollinger Band. ►This strategy was tested on 15-minute charts of EURUSD with reward-to-risk ratio 1,5 and win rate of 52% over 100 trades in total. ►►►Due to the relatively low win rate of this strategy, you need to filter out potentially harmful signals with a proper analysis. Bear in mind that backtesting performance doesn't guarantee future profitability. • Most systematic strategies are not suitable for each timeframe - if you use the different timeframe than the one it was tested on, the result can differ significantly. • You should perform your own backtest to base your trades on more data & to establish confidence in the selected strategy. • This script is not a replacement for proper analysis. New strategies will be added when I have time. If I see multiple people asking for the same feature, I might agree to release it with a new version. I am not going to add input options in this script, it could come as a separate script though. I am in no way affiliated with the Youtube channel, so if you find the script helpful, shot me a message or send me some PulseWire coins >) If you encounter any bug, you can report it in a message or in comments. Support it with screenshot and relevant information such as a time when it occurred and what options were on etc.

Indicator

by OrcChieftain

Trading Rush Signals & Alerts This is an unofficial script for strategies tested on TRADING RUSH Youtube channel. Over time, most successful strategies will be added with an option to set strategy-specific alerts . Trading Rush Signals & Alerts will draw signals on the chart when the entry conditions are met. You can also opt for displaying indicators . My script is meant for beginners but can be used by veterans too. Just pick only one or two strategies, you don't want to flood your chart with conflicting signals. You may want to support your trades with a proper analysis. If a new signal occurs when there is still an open position, you are not supposed to take another. The current version includes MACD and Donchian Channels. MACD strategy: ►Buy, when MACD crosses below the signal line when it is negative. The price must also be above 200 EMA. ►Sell, when MACD crosses above the signal line when it is positive. The price must also be below 200 EMA. ►This strategy was tested on 30-minute charts of EURUSD and EURJPY with reward-to-risk ratio 1,5 and win rate of 62% over 100 trades . ►►►MACD has to be added to your chart separately because it needs a new window. Indicators displaying will not add this indicator to the chart. Donchian Channels strategy: ►Buy, when the price breaches Donchian to the upside after making a new low. The price must also be above 200 EMA. ►Sell, when the price breaches Donchian to the downside after making a new high. The price must also be below 200 EMA. ►Stop-loss is Donchian bottom for long and Donchian top for shorts. Check the channel for more information. ►This strategy was tested on 30-minute charts of EURUSD with reward-to-risk ratio 1,5 and win rate of 58% over 100 trades . ►►►I programmed alerts for Donchians to come ahead of an actual breach. If you often leave the screen when trading, this will help you. The necessary downside for that is the alerts might come when the signal doesn't trigger in the end. You will see a mark on the chart if the conditions are truly met. Bear in mind that backtesting performance doesn't guarantee future profitability. • Most systematic strategies are not suitable for any timeframe. • You should perform your own backtest to base your trades on more data & to establish confidence in the selected strategy. New strategies will be added when I have time. If I see multiple people asking for the same new feature, I might agree to release it with a new version. I am not going to add input options in this script, it could come as a separate script though. I am in no way affiliated with the Youtubechannel , so if you find the script helpful, shot me a message or send me some PulseWire coins >) If you encounter any bug, you can report it in a message or in comments. Support it with screenshot and relevant information such as a time when it occurred and what options were on etc.

Indicator

by OrcChieftain

[KK]EMA Breakout,1st retest,Peak Breakout This script gives Signal based on 3 parameters (1) Exponential Moving average breakout (2)Retest after Breakout (3) Peak Breakout after retest for conformation Recommended Settings: (1) EMA Length = 20 period (2)Left Bars= Right Bars = 4 (3)15min chart resolution Note: Default setting is what recommended. Interpretation: (1)Green Background = Higher Peak Breakout candle after conformed retest (2)Red Background = Lower Peak Breakout candle after conformed retest (3) Green circle = 1st Upward Breakout candle after conformed retest ( if previous breakout is Downward) (4)Red circle = 1st Downward Breakout candle after conformed retest ( if previous breakout is Upward) Note: you can additionally add backgrounds for EMA breakout and conformed Retest from code. Signals: (1)Long = When Green circle (2)Short = When Red circle This script works with any ticker id. Best Use for Equity and Forex Markets. Also, added alert condition for green and red circle. P.S.: Thanks to @RagingRocketBull for source code for breakout candles

Indicator

by kaushalkumar_kaneria

Fancy strategy alerts example [QuantNomad]Alerts on strategies were introduced just recently in PulseWire. These alerts have an alert_message placeholder which allows you to compose in PineScript very complex alerts and insert quite a lot of information in them. This is just very simple example of how they can look like.

Strategy

Vertical Horizontal Moving Average [AneoPsy & alexgrover] Moving average adapting to the strength of the trend, this is made possible by using the square of the vertical-horizontal filter as a smoothing factor. Alerts are included with two different types of conditions available to the user. Settings Length : Period of the moving average Src : Input data for the indicator Alerts : Types of conditions to be used in the alerts, when set to "VHMA Direction Change" alerts are triggered once the VHMA is either rising or declining, else the alerts are based on the crosses between Src and the VHMA Usage The VHMA can be used as a fast or slow-moving average in a moving average crossover system, or as input for other indicators. VHMA of with length = 25 and sma with length = 200. VHMA with length = 25 used as input for the RSI with length = 14. Details The vertical-horizontal filter is a measure of the strength of the trend and lay in a (0,1) range, to calculate it you just need to divide the rolling range over with the rolling sum of the absolute price changes, squaring the result allow to get lower results with higher values of length . Squared vertical horizontal filter with length = 50, the value is low when the market is ranging and high when trending. To set the alerts go in the alert panel, click on create alert, and select VHMA in "condition", choose between the buy or sell alert. If Src = closing price or another indicator dependant on the closing price select in options "once per bar close", if the indicator using the opening or lagged closing prices values as input select "One per bar" instead. Thanks Thanks to AneoPsy for adding the color change, the idea to use two kinds of conditions for the alert, and for its feedback, you can follow him www.pulsewire.com and finally thanks to you for reading and for your support, only one last script left for the month, then we'll start July with some pretty interesting indicators, I hope you'll like them ^^/

Indicator

ck - EMA Cross with Alerts Displays 5 popular EMAs (you can hide any you don’t want to see from the “Styles” screen when editing the config). Set the values for your EMAs by clicking the cog after adding this indicator to your chart. A Long or Short signal is fired when EMA1 crosses EMA2 - a cross up is a Long signal, a cross down is a Short signal. Connect to your Bots (3commas / 3C.exchange recommended) to automate buys and sells!

Indicator

Trend Follow with kijun-sen/tenkan sen for 1 Hour SPX This script determines, plots and alerts on probable trend initiation and continuation points, using tenkan-sen(conversion line of ichimoku), kijun-sen(baseline of ichimoku) and stochastic RSI, for 1 H SPX. New long/short trend initiates when prices cross above/below kijun sen. The trend continues when prices cross above/below tenkan-sen or stochastic RSI crosses up/down its signal line, while prices are above/below kijun-sen. It is good to take partial profit between 10-15 points gain and trail the left with stops below kijun-sen line. While placing the order, using 2-3 points buffer above/below of signal bars is recommended. Additionally, please be careful about clouds and do not place long/short orders below/above clouds.

Indicator

RSI Lookback Checks RSI High/Low X candles in the past Displays Green/Red circles at bottom of chart Sends alerts

Indicator

Alert Intervals and Delays Framework [BigBitsIO]Simply explained, this script, when modified to each specific use case, can allow you to specify that alert conditions are only checked every X seconds (AKA Intervals - as fast as every single second) and that alerts can not occur quicker than the user-specified delay (in seconds) Explained: - This will work on any resolution, but for the best results/fastest alerts a premium plan with 1s resolution will work best. - Be mindful of which alert option you choose when setting up corresponding alerts. On 1s resolution with alerts once per bar you can get alerts up to every second. - The scan for alerts every X seconds will be when the script can scan, by default every 5th second. If you want it to scan on any and all updates, set it to 1 for 1 second - The delay between alerts will just require than that many seconds have passed since the last alert was fired (whether it was an actual alert in PulseWire or just as recognized by this script) - To have a custom alert condition met, do your normal indicator logic and check your conditions during the scanning period after the delay has been met, as marked by comments in the code FAQ - Why is this script useful? - Many people do not want to constantly monitor for alerts, and may only want alerts to trigger at certain times, or after certain periods of time - What is an example? - You want a 1min resolution RSI alert, but you don't want to see it every minute, or only once. - By setting your alert to once per bar, or once per minute on a 1min or less resolution chart you can get alerts only every 2min 30sec for example when setting your delay to 150 (seconds) Warning: Since the scan time and alert times on larger resolutions can not be accessed from previous candles when first added to the chart it should be pretty important that you operate on a chart with a smaller resolution than your delay.

Indicator

Fixed Percent Stop Loss & Take Profit % - For Study Scripts =========== Fixed Percent Stop Loss & Take Profit % - { FOR STUDY SCRIPTS! } =========== A neat example of how to set up Fixed Stops and Take Profit as a percent of the entry price - This is for setting Alerts within your own Study Script for when either your SL or TP get hit. Yup, that's about it! You can ignore the actual entry/exit orders - they're based on a simple MA cross and are therefore NOT relevant, NOT profitable and NOT recommended! You should be using this code as a way of adding Stops and Takes to your own scripts - hope it helps! Set your "Open Long/Short" Alerts to be triggered "Once per Bar Close" - Set your "SL/TP" Alerts to trigger "Once per Bar". -- We wrote this with a bit of a rush on! ~ If you spot any mistakes/bugs just let us know and we'll get round to them asap! ----------- Good Luck and Happy Trading!

Indicator

Auto Fib Retracement Alerts For the fibonacci traders. The Auto Fib Retracement Is a good indicator for pulsewire to show you the current alerts and points to watch in the market IMPORTANT SETTING => Retracement This controls your alert levels I have modified it to deliver the following +Custom Fib retracement level alerts +Drawing of old levels and retracement levels +Backtesting Old Alerts There are two shapes drawn on the chart; Shown When the fib end is attained and market retraces back to your level 1. Buy retracement - 2. Sell retracement How are they detected? When we have new levels in the market; this is when the red or gree line changes, we calculate the new fib level that we will be watching for retracement This is the purple level drawn on the chart When the market first crosses below or above this level, The alert will be fired. Consequent crosses are not updated Enjoy! 😍 Originally requested by trade atechproduction

Indicator

MTF Trailing SL Alerts [QuantNomad]These are alerts for my MTF Trailing SL Strategy. Entry Long position if all 4 time-frames agree on the long signal. Exit Long positions when at least 2 time-frames disagree on the long signals. Entry to Short position if all 4 time-frames agree on Short signal. Exit from Short positions when at least 2 time-frames disagree on Short signal. Use "Once Per Bar Close" when creating alerts. Link to the strategy:

Indicator

Parabolic SAR [with Algorithm and Alerts]Hello All, In one of my projects I needed Parabolic SAR algorithm. I decided to write it in Pine and publish it. Then I added Alerts and Labels. here it is ;) ENJOY!

Indicator

by LonesomeTheBlue

HMA-Crossover Alerts This simple script plots bullish and bearish Hull Moving Average Crossovers and fires Alerts when long or short conditions are met.

Indicator

by UnknownUnicorn5886209

Key EMAs Simple trade helper script that plots: - 10 & 20 EMA crosses for fast moves - 10 & 200 EMA crosses for trends - 50 & 200 EMA golden and death crosses Alerts built in.

Indicator

Pump Alerts My very first indicator in Pine Script with two alert conditions for trading bots. It's based on " Pump Catcher " by @ joepegler I modified some parts, hopefully improved the usability and enabled alerts, so you can use it to trigger bots like 3commas via webhooks. Pump Alerts 🚀 attempts to "detect moments of abnormal and accelerating increase in volume" AKA "pumps". Small and big pumps. I recommend using it on small timeframes like 1 to 15 min and tinkering with the lookback period as well as threshold values. Other than that it's pretty self-explanatory and beginner-friendly. Free and Open Source. Let me know how you use it!

Indicator

by UnknownUnicorn5886209

In-depth global business and economic analysis Comprehensive trading education and market insights